[thirdparty/u-boot.git] / include / configs / xpress.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright (C) 2015-2016 Stefan Roese <sr@denx.de>
 *
 * Configuration settings for the CCV xPress board
 */
#ifndef __XPRESS_CONFIG_H
#define __XPRESS_CONFIG_H

#include "mx6_common.h"
#include <asm/mach-imx/gpio.h>

/* SPL options */
#include "imx6_spl.h"

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(16 << 20)

#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE		MX6UL_UART7_BASE_ADDR

/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC2_BASE_ADDR

/* I2C configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C4		/* enable I2C bus 4 */
#define CONFIG_SYS_I2C_SPEED		100000

/* Miscellaneous configurable options */

#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
#define CONFIG_SYS_HZ			1000

/* Physical Memory Map */
#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
#define PHYS_SDRAM_SIZE			(128 << 20)

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* Environment is in stored in the eMMC boot partition */
#define CONFIG_SYS_MMC_ENV_DEV		0	/* USDHC2 */
#define CONFIG_SYS_MMC_ENV_PART		1	/* boot parition */
#define CONFIG_MMCROOT			"/dev/mmcblk0p2"  /* USDHC2 */

/* USB Configs */
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS		0
#define CONFIG_USB_MAX_CONTROLLER_COUNT	2

#define CONFIG_FEC_MXC
#define CONFIG_FEC_ENET_DEV		0
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_MXC_PHYADDR          0x0
#define CONFIG_FEC_XCV_TYPE             RMII
#define CONFIG_ETHPRIME			"FEC"

#define CONFIG_IMX_THERMAL

#define CONFIG_SYS_MMC_IMG_LOAD_PART	1

#define CONFIG_UBOOT_SECTOR_START	0x2
#define CONFIG_UBOOT_SECTOR_COUNT	0x3fe

#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=boot.scr\0" \
	"image=zImage\0" \
	"console=ttymxc6\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"fdt_file=undefined\0" \
	"fdt_addr=0x83000000\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	"mmcautodetect=yes\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot}\0" \
	"loadbootscript=" \
		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source\0" \
	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0" \
	"uboot=ccv/u-boot.imx\0"					\
	"uboot_start="__stringify(CONFIG_UBOOT_SECTOR_START)"\0"	\
	"uboot_size="__stringify(CONFIG_UBOOT_SECTOR_COUNT)"\0"		\
	"update_uboot=if tftp ${uboot}; then "				\
		"if itest ${filesize} > 0; then "			\
			"mmc dev 0 1;"					\
			"setexpr blkc ${filesize} / 0x200;"		\
			"setexpr blkc ${blkc} + 1;"			\
			"if itest ${blkc} <= ${uboot_size}; then "	\
				"mmc write ${loadaddr} ${uboot_start} "	\
					"${blkc};"			\
			"fi;"						\
		"fi; fi;"						\
		"setenv filesize; setenv blkc\0"			\
	"update_bootpart=mmc bootbus 0 2 1 2;mmc partconf 0 1 1 0\0"

#endif /* __XPRESS_CONFIG_H */
Commit	Line	Data
83d290c5	1	/* SPDX-License-Identifier: GPL-2.0+ */
a7f480d9 SR	2	/*
	3	* Copyright (C) 2015-2016 Stefan Roese <sr@denx.de>
	4	*
	5	* Configuration settings for the CCV xPress board
a7f480d9 SR	6	*/
	7	#ifndef __XPRESS_CONFIG_H
	8	#define __XPRESS_CONFIG_H
	9
	10	#include "mx6_common.h"
552a848e	11	#include <asm/mach-imx/gpio.h>
a7f480d9 SR	12
a7f480d9 SR	13	/* SPL options */
a7f480d9 SR	14	#include "imx6_spl.h"
a7f480d9 SR	15
a7f480d9 SR	16	/* Size of malloc() pool */
	17	#define CONFIG_SYS_MALLOC_LEN (16 << 20)
	18
a7f480d9	19	#define CONFIG_MXC_UART
fe12386c	20	#define CONFIG_MXC_UART_BASE MX6UL_UART7_BASE_ADDR
a7f480d9 SR	21
	22	/* MMC Configs */
	23	#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
a7f480d9 SR	24
a7f480d9 SR	25	/* I2C configs */
a7f480d9 SR	26	#define CONFIG_SYS_I2C
	27	#define CONFIG_SYS_I2C_MXC
	28	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
	29	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
	30	#define CONFIG_SYS_I2C_MXC_I2C4 /* enable I2C bus 4 */
	31	#define CONFIG_SYS_I2C_SPEED 100000
	32
	33	/* Miscellaneous configurable options */
a7f480d9 SR	34
	35	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
	36	#define CONFIG_SYS_HZ 1000
	37
a7f480d9	38	/* Physical Memory Map */
a7f480d9 SR	39	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	40	#define PHYS_SDRAM_SIZE (128 << 20)
	41
	42	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	43	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	44	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	45
	46	#define CONFIG_SYS_INIT_SP_OFFSET \
	47	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	48	#define CONFIG_SYS_INIT_SP_ADDR \
	49	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	50
a7f480d9	51	/* Environment is in stored in the eMMC boot partition */
a7f480d9 SR	52	#define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC2 */
	53	#define CONFIG_SYS_MMC_ENV_PART 1 /* boot parition */
	54	#define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC2 */
	55
a7f480d9	56	/* USB Configs */
a7f480d9 SR	57	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
	58	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	59	#define CONFIG_MXC_USB_FLAGS 0
	60	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	61
	62	#define CONFIG_FEC_MXC
a7f480d9 SR	63	#define CONFIG_FEC_ENET_DEV 0
	64	#define IMX_FEC_BASE ENET_BASE_ADDR
	65	#define CONFIG_FEC_MXC_PHYADDR 0x0
	66	#define CONFIG_FEC_XCV_TYPE RMII
	67	#define CONFIG_ETHPRIME "FEC"
a7f480d9 SR	68
	69	#define CONFIG_IMX_THERMAL
	70
	71	#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
	72
	73	#define CONFIG_UBOOT_SECTOR_START 0x2
	74	#define CONFIG_UBOOT_SECTOR_COUNT 0x3fe
	75
	76	#define CONFIG_EXTRA_ENV_SETTINGS \
	77	"script=boot.scr\0" \
	78	"image=zImage\0" \
fe12386c	79	"console=ttymxc6\0" \
a7f480d9 SR	80	"fdt_high=0xffffffff\0" \
	81	"initrd_high=0xffffffff\0" \
	82	"fdt_file=undefined\0" \
	83	"fdt_addr=0x83000000\0" \
	84	"boot_fdt=try\0" \
	85	"ip_dyn=yes\0" \
	86	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
	87	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
	88	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	89	"mmcautodetect=yes\0" \
	90	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	91	"root=${mmcroot}\0" \
	92	"loadbootscript=" \
	93	"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	94	"bootscript=echo Running bootscript from mmc ...; " \
	95	"source\0" \
	96	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	97	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	98	"mmcboot=echo Booting from mmc ...; " \
	99	"run mmcargs; " \
	100	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	101	"if run loadfdt; then " \
	102	"bootz ${loadaddr} - ${fdt_addr}; " \
	103	"else " \
	104	"if test ${boot_fdt} = try; then " \
	105	"bootz; " \
	106	"else " \
	107	"echo WARN: Cannot load the DT; " \
	108	"fi; " \
	109	"fi; " \
	110	"else " \
	111	"bootz; " \
	112	"fi;\0" \
	113	"uboot=ccv/u-boot.imx\0" \
	114	"uboot_start="__stringify(CONFIG_UBOOT_SECTOR_START)"\0" \
	115	"uboot_size="__stringify(CONFIG_UBOOT_SECTOR_COUNT)"\0" \
	116	"update_uboot=if tftp ${uboot}; then " \
	117	"if itest ${filesize} > 0; then " \
	118	"mmc dev 0 1;" \
	119	"setexpr blkc ${filesize} / 0x200;" \
	120	"setexpr blkc ${blkc} + 1;" \
	121	"if itest ${blkc} <= ${uboot_size}; then " \
	122	"mmc write ${loadaddr} ${uboot_start} " \
	123	"${blkc};" \
	124	"fi;" \
	125	"fi; fi;" \
	126	"setenv filesize; setenv blkc\0" \
	127	"update_bootpart=mmc bootbus 0 2 1 2;mmc partconf 0 1 1 0\0"
	128
	129	#endif /* __XPRESS_CONFIG_H */