[people/ms/u-boot.git] / include / configs / zipitz2.h

/*
 * Aeronix Zipit Z2 configuration file
 *
 * Copyright (C) 2009-2010 Marek Vasut <marek.vasut@gmail.com>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Board Configuration Options
 */
#define	CONFIG_PXA27X		1	/* Marvell PXA270 CPU */
#define	CONFIG_ZIPITZ2		1	/* Zipit Z2 board */

#undef	BOARD_LATE_INIT
#undef	CONFIG_SKIP_RELOCATE_UBOOT
#undef	CONFIG_USE_IRQ
#undef	CONFIG_SKIP_LOWLEVEL_INIT

/*
 * Environment settings
 */
#define	CONFIG_ENV_OVERWRITE
#define CONFIG_ENV_IS_IN_FLASH		1
#define CONFIG_ENV_ADDR			0x40000
#define CONFIG_ENV_SIZE			0x20000

#define	CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + CONFIG_STACKSIZE)
#define	CONFIG_SYS_GBL_DATA_SIZE	512

#define	CONFIG_BOOTCOMMAND						\
	"if mmc init && fatload mmc 0 0xa0000000 uboot.script ; then "	\
		"source 0xa0000000; "					\
	"else "								\
		"bootm 0x60000; "					\
	"fi; "
#define	CONFIG_BOOTARGS							\
	"console=tty0 console=ttyS2,115200 fbcon=rotate:3"
#define	CONFIG_TIMESTAMP
#define	CONFIG_BOOTDELAY		2	/* Autoboot delay */
#define	CONFIG_CMDLINE_TAG
#define	CONFIG_SETUP_MEMORY_TAGS

#define	CONFIG_LZMA			/* LZMA compression support */

/*
 * Serial Console Configuration
 * STUART - the lower serial port on Colibri board
 */
#define	CONFIG_PXA_SERIAL
#define	CONFIG_STUART			1
#define	CONFIG_BAUDRATE			115200
#define	CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

/*
 * Bootloader Components Configuration
 */
#include <config_cmd_default.h>

#undef	CONFIG_CMD_NET
#define	CONFIG_CMD_ENV
#undef	CONFIG_CMD_IMLS
#define	CONFIG_CMD_MMC
#define	CONFIG_CMD_SPI

/*
 * MMC Card Configuration
 */
#ifdef	CONFIG_CMD_MMC
#define	CONFIG_MMC
#define	CONFIG_PXA_MMC
#define	CONFIG_SYS_MMC_BASE		0xF0000000
#define	CONFIG_CMD_FAT
#define CONFIG_CMD_EXT2
#define	CONFIG_DOS_PARTITION
#endif

/*
 * SPI and LCD
 */
#ifdef	CONFIG_CMD_SPI
#define	CONFIG_SOFT_SPI
#define	CONFIG_LCD
#define	CONFIG_LMS283GF05
#define	CONFIG_VIDEO_LOGO
#define	CONFIG_CMD_BMP
#define	CONFIG_SPLASH_SCREEN
#define	CONFIG_SPLASH_SCREEN_ALIGN
#define	CONFIG_VIDEO_BMP_GZIP
#define	CONFIG_VIDEO_BMP_RLE8
#define	CONFIG_SYS_VIDEO_LOGO_MAX_SIZE	(2 << 20)
#undef	SPI_INIT

#define	SPI_DELAY	udelay(10)
#define	SPI_SDA(val)	zipitz2_spi_sda(val)
#define	SPI_SCL(val)	zipitz2_spi_scl(val)
#define	SPI_READ	zipitz2_spi_read()
#ifndef	__ASSEMBLY__
void zipitz2_spi_sda(int);
void zipitz2_spi_scl(int);
unsigned char zipitz2_spi_read(void);
#endif
#endif

/*
 * KGDB
 */
#ifdef	CONFIG_CMD_KGDB
#define	CONFIG_KGDB_BAUDRATE		230400		/* speed to run kgdb serial port */
#define	CONFIG_KGDB_SER_INDEX		2		/* which serial port to use */
#endif

/*
 * HUSH Shell Configuration
 */
#define	CONFIG_SYS_HUSH_PARSER		1
#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "

#define	CONFIG_SYS_LONGHELP				/* undef to save memory	*/
#ifdef	CONFIG_SYS_HUSH_PARSER
#define	CONFIG_SYS_PROMPT		"$ "		/* Monitor Command Prompt */
#else
#define	CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt */
#endif
#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size */
#define	CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
#define	CONFIG_SYS_MAXARGS		16		/* max number of command args */
#define	CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
#define	CONFIG_SYS_DEVICE_NULLDEV	1

/*
 * Clock Configuration
 */
#undef	CONFIG_SYS_CLKS_IN_HZ
#define	CONFIG_SYS_HZ			3250000		/* Timer @ 3250000 Hz */
#define CONFIG_SYS_CPUSPEED		0x190		/* standard setting for 312MHz; L=16, N=1.5, A=0, SDCLK!=SystemBus */

/*
 * Stack sizes
 */
#define	CONFIG_STACKSIZE		(128*1024)	/* regular stack */
#ifdef	CONFIG_USE_IRQ
#define	CONFIG_STACKSIZE_IRQ		(4*1024)	/* IRQ stack */
#define	CONFIG_STACKSIZE_FIQ		(4*1024)	/* FIQ stack */
#endif

/*
 * DRAM Map
 */
#define	CONFIG_NR_DRAM_BANKS		1		/* We have 1 bank of DRAM */
#define	PHYS_SDRAM_1			0xa0000000	/* SDRAM Bank #1 */
#define	PHYS_SDRAM_1_SIZE		0x02000000	/* 32 MB */

#define	CONFIG_SYS_DRAM_BASE		0xa0000000	/* CS0 */
#define	CONFIG_SYS_DRAM_SIZE		0x02000000	/* 32 MB DRAM */

#define CONFIG_SYS_MEMTEST_START	0xa0400000	/* memtest works on */
#define CONFIG_SYS_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM */

#define	CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_DRAM_BASE

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
#define	CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_GBL_DATA_SIZE + PHYS_SDRAM_1)

/*
 * NOR FLASH
 */
#define PHYS_FLASH_1			0x00000000	/* Flash Bank #1 */
#define PHYS_FLASH_SIZE			0x00800000	/* 8 MB */
#define PHYS_FLASH_SECT_SIZE		0x00010000	/* 64 KB sectors */
#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1

#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER		1
#define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT

#define CONFIG_SYS_MONITOR_BASE		PHYS_FLASH_1
#define CONFIG_SYS_MONITOR_LEN		PHYS_FLASH_SECT_SIZE

#define CONFIG_SYS_MAX_FLASH_BANKS	1
#define CONFIG_SYS_MAX_FLASH_SECT	256

#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1

#define CONFIG_SYS_FLASH_ERASE_TOUT	(2*CONFIG_SYS_HZ)
#define CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ)
#define CONFIG_SYS_FLASH_LOCK_TOUT	(2*CONFIG_SYS_HZ)
#define CONFIG_SYS_FLASH_UNLOCK_TOUT	(2*CONFIG_SYS_HZ)
#define CONFIG_SYS_FLASH_PROTECTION

/*
 * GPIO settings
 */
#define CONFIG_SYS_GAFR0_L_VAL	0x02000140
#define CONFIG_SYS_GAFR0_U_VAL	0x59188000
#define CONFIG_SYS_GAFR1_L_VAL	0x63900002
#define CONFIG_SYS_GAFR1_U_VAL	0xaaa03950
#define CONFIG_SYS_GAFR2_L_VAL	0x0aaaaaaa
#define CONFIG_SYS_GAFR2_U_VAL	0x29000308
#define CONFIG_SYS_GAFR3_L_VAL	0x54000000
#define CONFIG_SYS_GAFR3_U_VAL	0x000000d5
#define CONFIG_SYS_GPCR0_VAL	0x00000000
#define CONFIG_SYS_GPCR1_VAL	0x00000020
#define CONFIG_SYS_GPCR2_VAL	0x00000000
#define CONFIG_SYS_GPCR3_VAL	0x00000000
#define CONFIG_SYS_GPDR0_VAL	0xdafcee00
#define CONFIG_SYS_GPDR1_VAL	0xffa3aaab
#define CONFIG_SYS_GPDR2_VAL	0x8fe1ffff
#define CONFIG_SYS_GPDR3_VAL	0x001b1f8a
#define CONFIG_SYS_GPSR0_VAL	0x06080400
#define CONFIG_SYS_GPSR1_VAL	0x007f0000
#define CONFIG_SYS_GPSR2_VAL	0x032a0000
#define CONFIG_SYS_GPSR3_VAL	0x00000180

#define CONFIG_SYS_PSSR_VAL	0x30

/*
 * Clock settings
 */
#define CONFIG_SYS_CKEN		0x00511220
#define CONFIG_SYS_CCCR		0x00000190

/*
 * Memory settings
 */
#define CONFIG_SYS_MSC0_VAL	0x2ffc38f8
#define CONFIG_SYS_MSC1_VAL	0x0000ccd1
#define CONFIG_SYS_MSC2_VAL	0x0000b884
#define CONFIG_SYS_MDCNFG_VAL	0x08000ba9
#define CONFIG_SYS_MDREFR_VAL	0x2011a01e
#define CONFIG_SYS_MDMRS_VAL	0x00000000
#define CONFIG_SYS_FLYCNFG_VAL	0x00010001
#define CONFIG_SYS_SXCNFG_VAL	0x40044004

/*
 * PCMCIA and CF Interfaces
 */
#define CONFIG_SYS_MECR_VAL	0x00000001
#define CONFIG_SYS_MCMEM0_VAL	0x00014307
#define CONFIG_SYS_MCMEM1_VAL	0x00014307
#define CONFIG_SYS_MCATT0_VAL	0x0001c787
#define CONFIG_SYS_MCATT1_VAL	0x0001c787
#define CONFIG_SYS_MCIO0_VAL	0x0001430f
#define CONFIG_SYS_MCIO1_VAL	0x0001430f

#endif	/* __CONFIG_H */
Commit	Line	Data
bc3a4a53 MV	1	/*
	2	* Aeronix Zipit Z2 configuration file
	3	*
	4	* Copyright (C) 2009-2010 Marek Vasut <marek.vasut@gmail.com>
	5	*
	6	* This program is free software; you can redistribute it and/or
	7	* modify it under the terms of the GNU General Public License as
	8	* published by the Free Software Foundation; either version 2 of
	9	* the License, or (at your option) any later version.
	10	*
	11	* This program is distributed in the hope that it will be useful,
	12	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	13	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	14	* GNU General Public License for more details.
	15	*
	16	* You should have received a copy of the GNU General Public License
	17	* along with this program; if not, write to the Free Software
	18	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	19	* MA 02111-1307 USA
	20	*/
	21
	22	#ifndef __CONFIG_H
	23	#define __CONFIG_H
	24
	25	/*
	26	* High Level Board Configuration Options
	27	*/
	28	#define CONFIG_PXA27X 1 /* Marvell PXA270 CPU */
	29	#define CONFIG_ZIPITZ2 1 /* Zipit Z2 board */
	30
	31	#undef BOARD_LATE_INIT
	32	#undef CONFIG_SKIP_RELOCATE_UBOOT
	33	#undef CONFIG_USE_IRQ
	34	#undef CONFIG_SKIP_LOWLEVEL_INIT
	35
	36	/*
	37	* Environment settings
	38	*/
	39	#define CONFIG_ENV_OVERWRITE
	40	#define CONFIG_ENV_IS_IN_FLASH 1
	41	#define CONFIG_ENV_ADDR 0x40000
	42	#define CONFIG_ENV_SIZE 0x20000
	43
	44	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + CONFIG_STACKSIZE)
	45	#define CONFIG_SYS_GBL_DATA_SIZE 512
	46
	47	#define CONFIG_BOOTCOMMAND \
	48	"if mmc init && fatload mmc 0 0xa0000000 uboot.script ; then " \
	49	"source 0xa0000000; " \
	50	"else " \
	51	"bootm 0x60000; " \
	52	"fi; "
	53	#define CONFIG_BOOTARGS \
	54	"console=tty0 console=ttyS2,115200 fbcon=rotate:3"
	55	#define CONFIG_TIMESTAMP
	56	#define CONFIG_BOOTDELAY 2 /* Autoboot delay */
	57	#define CONFIG_CMDLINE_TAG
	58	#define CONFIG_SETUP_MEMORY_TAGS
	59
	60	#define CONFIG_LZMA /* LZMA compression support */
	61
	62	/*
	63	* Serial Console Configuration
	64	* STUART - the lower serial port on Colibri board
65	*/
66	#define CONFIG_PXA_SERIAL
67	#define CONFIG_STUART 1
68	#define CONFIG_BAUDRATE 115200
69	#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
70
71	/*
72	* Bootloader Components Configuration
73	*/
74	#include <config_cmd_default.h>
75
76	#undef CONFIG_CMD_NET
77	#define CONFIG_CMD_ENV
78	#undef CONFIG_CMD_IMLS
79	#define CONFIG_CMD_MMC
80	#define CONFIG_CMD_SPI
81
82	/*
83	* MMC Card Configuration
84	*/
85	#ifdef CONFIG_CMD_MMC
86	#define CONFIG_MMC
87	#define CONFIG_PXA_MMC
88	#define CONFIG_SYS_MMC_BASE 0xF0000000
89	#define CONFIG_CMD_FAT
90	#define CONFIG_CMD_EXT2
91	#define CONFIG_DOS_PARTITION
92	#endif
93
94	/*
95	* SPI and LCD
96	*/
97	#ifdef CONFIG_CMD_SPI
98	#define CONFIG_SOFT_SPI
99	#define CONFIG_LCD
100	#define CONFIG_LMS283GF05
101	#define CONFIG_VIDEO_LOGO
102	#define CONFIG_CMD_BMP
103	#define CONFIG_SPLASH_SCREEN
104	#define CONFIG_SPLASH_SCREEN_ALIGN
105	#define CONFIG_VIDEO_BMP_GZIP
106	#define CONFIG_VIDEO_BMP_RLE8
107	#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20)
108	#undef SPI_INIT
109
110	#define SPI_DELAY udelay(10)
111	#define SPI_SDA(val) zipitz2_spi_sda(val)
112	#define SPI_SCL(val) zipitz2_spi_scl(val)
113	#define SPI_READ zipitz2_spi_read()
114	#ifndef __ASSEMBLY__
115	void zipitz2_spi_sda(int);
116	void zipitz2_spi_scl(int);
117	unsigned char zipitz2_spi_read(void);
118	#endif
119	#endif
120
121	/*
122	* KGDB
123	*/
124	#ifdef CONFIG_CMD_KGDB
125	#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
126	#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
127	#endif
128
129	/*
130	* HUSH Shell Configuration
131	*/
132	#define CONFIG_SYS_HUSH_PARSER 1
133	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
134
135	#define CONFIG_SYS_LONGHELP /* undef to save memory */
136	#ifdef CONFIG_SYS_HUSH_PARSER
137	#define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */
138	#else
139	#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
140	#endif
141	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
142	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
143	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
144	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
145	#define CONFIG_SYS_DEVICE_NULLDEV 1
146
147	/*
148	* Clock Configuration
149	*/
150	#undef CONFIG_SYS_CLKS_IN_HZ
151	#define CONFIG_SYS_HZ 3250000 /* Timer @ 3250000 Hz */
152	#define CONFIG_SYS_CPUSPEED 0x190 /* standard setting for 312MHz; L=16, N=1.5, A=0, SDCLK!=SystemBus */
153
154	/*
155	* Stack sizes
156	*/
157	#define CONFIG_STACKSIZE (1281024) / regular stack */
158	#ifdef CONFIG_USE_IRQ
159	#define CONFIG_STACKSIZE_IRQ (41024) / IRQ stack */
160	#define CONFIG_STACKSIZE_FIQ (41024) / FIQ stack */
161	#endif
162
163	/*
164	* DRAM Map
165	*/
166	#define CONFIG_NR_DRAM_BANKS 1 /* We have 1 bank of DRAM */
167	#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
168	#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
169
170	#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */
171	#define CONFIG_SYS_DRAM_SIZE 0x02000000 /* 32 MB DRAM */
172
173	#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
174	#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
175
176	#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_DRAM_BASE
177
6ef6eb91 MV	178	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
	179	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_GBL_DATA_SIZE + PHYS_SDRAM_1)
	180
bc3a4a53 MV	181	/*
	182	* NOR FLASH
	183	*/
	184	#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
	185	#define PHYS_FLASH_SIZE 0x00800000 /* 8 MB */
	186	#define PHYS_FLASH_SECT_SIZE 0x00010000 /* 64 KB sectors */
	187	#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
	188
	189	#define CONFIG_SYS_FLASH_CFI
	190	#define CONFIG_FLASH_CFI_DRIVER 1
	191	#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
	192
	193	#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
	194	#define CONFIG_SYS_MONITOR_LEN PHYS_FLASH_SECT_SIZE
	195
	196	#define CONFIG_SYS_MAX_FLASH_BANKS 1
	197	#define CONFIG_SYS_MAX_FLASH_SECT 256
	198
	199	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
	200
	201	#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ)
	202	#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ)
	203	#define CONFIG_SYS_FLASH_LOCK_TOUT (2*CONFIG_SYS_HZ)
	204	#define CONFIG_SYS_FLASH_UNLOCK_TOUT (2*CONFIG_SYS_HZ)
	205	#define CONFIG_SYS_FLASH_PROTECTION
	206
	207	/*
	208	* GPIO settings
	209	*/
	210	#define CONFIG_SYS_GAFR0_L_VAL 0x02000140
	211	#define CONFIG_SYS_GAFR0_U_VAL 0x59188000
	212	#define CONFIG_SYS_GAFR1_L_VAL 0x63900002
	213	#define CONFIG_SYS_GAFR1_U_VAL 0xaaa03950
	214	#define CONFIG_SYS_GAFR2_L_VAL 0x0aaaaaaa
	215	#define CONFIG_SYS_GAFR2_U_VAL 0x29000308
	216	#define CONFIG_SYS_GAFR3_L_VAL 0x54000000
	217	#define CONFIG_SYS_GAFR3_U_VAL 0x000000d5
	218	#define CONFIG_SYS_GPCR0_VAL 0x00000000
	219	#define CONFIG_SYS_GPCR1_VAL 0x00000020
	220	#define CONFIG_SYS_GPCR2_VAL 0x00000000
	221	#define CONFIG_SYS_GPCR3_VAL 0x00000000
	222	#define CONFIG_SYS_GPDR0_VAL 0xdafcee00
	223	#define CONFIG_SYS_GPDR1_VAL 0xffa3aaab
	224	#define CONFIG_SYS_GPDR2_VAL 0x8fe1ffff
	225	#define CONFIG_SYS_GPDR3_VAL 0x001b1f8a
	226	#define CONFIG_SYS_GPSR0_VAL 0x06080400
	227	#define CONFIG_SYS_GPSR1_VAL 0x007f0000
	228	#define CONFIG_SYS_GPSR2_VAL 0x032a0000
	229	#define CONFIG_SYS_GPSR3_VAL 0x00000180
	230
	231	#define CONFIG_SYS_PSSR_VAL 0x30
	232
	233	/*
	234	* Clock settings
	235	*/
	236	#define CONFIG_SYS_CKEN 0x00511220
	237	#define CONFIG_SYS_CCCR 0x00000190
	238
	239	/*
	240	* Memory settings
	241	*/
	242	#define CONFIG_SYS_MSC0_VAL 0x2ffc38f8
	243	#define CONFIG_SYS_MSC1_VAL 0x0000ccd1
	244	#define CONFIG_SYS_MSC2_VAL 0x0000b884
245	#define CONFIG_SYS_MDCNFG_VAL 0x08000ba9
246	#define CONFIG_SYS_MDREFR_VAL 0x2011a01e
247	#define CONFIG_SYS_MDMRS_VAL 0x00000000
248	#define CONFIG_SYS_FLYCNFG_VAL 0x00010001
249	#define CONFIG_SYS_SXCNFG_VAL 0x40044004
250
251	/*
252	* PCMCIA and CF Interfaces
253	*/
254	#define CONFIG_SYS_MECR_VAL 0x00000001
255	#define CONFIG_SYS_MCMEM0_VAL 0x00014307
256	#define CONFIG_SYS_MCMEM1_VAL 0x00014307
257	#define CONFIG_SYS_MCATT0_VAL 0x0001c787
258	#define CONFIG_SYS_MCATT1_VAL 0x0001c787
259	#define CONFIG_SYS_MCIO0_VAL 0x0001430f
260	#define CONFIG_SYS_MCIO1_VAL 0x0001430f
261
262	#endif /* __CONFIG_H */