]>
Commit | Line | Data |
---|---|---|
bc3a4a53 MV |
1 | /* |
2 | * Aeronix Zipit Z2 configuration file | |
3 | * | |
4 | * Copyright (C) 2009-2010 Marek Vasut <marek.vasut@gmail.com> | |
5 | * | |
3765b3e7 | 6 | * SPDX-License-Identifier: GPL-2.0+ |
bc3a4a53 MV |
7 | */ |
8 | ||
9 | #ifndef __CONFIG_H | |
10 | #define __CONFIG_H | |
11 | ||
12 | /* | |
13 | * High Level Board Configuration Options | |
14 | */ | |
abc20aba | 15 | #define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */ |
bc3a4a53 | 16 | #define CONFIG_ZIPITZ2 1 /* Zipit Z2 board */ |
9b3d167f | 17 | #define CONFIG_SYS_TEXT_BASE 0x0 |
bc3a4a53 | 18 | |
9660e442 | 19 | #undef CONFIG_BOARD_LATE_INIT |
bc3a4a53 | 20 | #undef CONFIG_SKIP_LOWLEVEL_INIT |
aac316a8 | 21 | #define CONFIG_PREBOOT |
bc3a4a53 MV |
22 | |
23 | /* | |
24 | * Environment settings | |
25 | */ | |
26 | #define CONFIG_ENV_OVERWRITE | |
27 | #define CONFIG_ENV_IS_IN_FLASH 1 | |
28 | #define CONFIG_ENV_ADDR 0x40000 | |
29 | #define CONFIG_ENV_SIZE 0x20000 | |
30 | ||
89959081 SG |
31 | /* we will never enable dcache, because we have to setup MMU first */ |
32 | #define CONFIG_SYS_DCACHE_OFF | |
33 | ||
24e84c3d | 34 | #define CONFIG_SYS_MALLOC_LEN (128*1024) |
24e84c3d | 35 | #define CONFIG_ARCH_CPU_INIT |
bc3a4a53 MV |
36 | |
37 | #define CONFIG_BOOTCOMMAND \ | |
81f731ca VK |
38 | "if mmc rescan && ext2load mmc 0 0xa0000000 boot/uboot.script ;"\ |
39 | "then " \ | |
bc3a4a53 MV |
40 | "source 0xa0000000; " \ |
41 | "else " \ | |
42 | "bootm 0x60000; " \ | |
43 | "fi; " | |
44 | #define CONFIG_BOOTARGS \ | |
45 | "console=tty0 console=ttyS2,115200 fbcon=rotate:3" | |
46 | #define CONFIG_TIMESTAMP | |
47 | #define CONFIG_BOOTDELAY 2 /* Autoboot delay */ | |
48 | #define CONFIG_CMDLINE_TAG | |
49 | #define CONFIG_SETUP_MEMORY_TAGS | |
24e84c3d | 50 | #define CONFIG_SYS_TEXT_BASE 0x0 |
bc3a4a53 MV |
51 | #define CONFIG_LZMA /* LZMA compression support */ |
52 | ||
53 | /* | |
54 | * Serial Console Configuration | |
55 | * STUART - the lower serial port on Colibri board | |
56 | */ | |
57 | #define CONFIG_PXA_SERIAL | |
58 | #define CONFIG_STUART 1 | |
ce6971cd | 59 | #define CONFIG_CONS_INDEX 2 |
bc3a4a53 | 60 | #define CONFIG_BAUDRATE 115200 |
bc3a4a53 MV |
61 | |
62 | /* | |
63 | * Bootloader Components Configuration | |
64 | */ | |
bc3a4a53 | 65 | #define CONFIG_CMD_ENV |
bc3a4a53 MV |
66 | #define CONFIG_CMD_MMC |
67 | #define CONFIG_CMD_SPI | |
68 | ||
69 | /* | |
70 | * MMC Card Configuration | |
71 | */ | |
72 | #ifdef CONFIG_CMD_MMC | |
73 | #define CONFIG_MMC | |
81f731ca VK |
74 | #define CONFIG_GENERIC_MMC |
75 | #define CONFIG_PXA_MMC_GENERIC | |
bc3a4a53 MV |
76 | #define CONFIG_SYS_MMC_BASE 0xF0000000 |
77 | #define CONFIG_CMD_FAT | |
78 | #define CONFIG_CMD_EXT2 | |
79 | #define CONFIG_DOS_PARTITION | |
80 | #endif | |
81 | ||
82 | /* | |
83 | * SPI and LCD | |
84 | */ | |
85 | #ifdef CONFIG_CMD_SPI | |
86 | #define CONFIG_SOFT_SPI | |
87 | #define CONFIG_LCD | |
0698095a | 88 | #define CONFIG_PXA_LCD |
bc3a4a53 MV |
89 | #define CONFIG_LMS283GF05 |
90 | #define CONFIG_VIDEO_LOGO | |
91 | #define CONFIG_CMD_BMP | |
92 | #define CONFIG_SPLASH_SCREEN | |
93 | #define CONFIG_SPLASH_SCREEN_ALIGN | |
94 | #define CONFIG_VIDEO_BMP_GZIP | |
95 | #define CONFIG_VIDEO_BMP_RLE8 | |
96 | #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20) | |
bc3a4a53 MV |
97 | |
98 | #define SPI_DELAY udelay(10) | |
99 | #define SPI_SDA(val) zipitz2_spi_sda(val) | |
100 | #define SPI_SCL(val) zipitz2_spi_scl(val) | |
101 | #define SPI_READ zipitz2_spi_read() | |
102 | #ifndef __ASSEMBLY__ | |
103 | void zipitz2_spi_sda(int); | |
104 | void zipitz2_spi_scl(int); | |
105 | unsigned char zipitz2_spi_read(void); | |
106 | #endif | |
107 | #endif | |
108 | ||
109 | /* | |
110 | * KGDB | |
111 | */ | |
112 | #ifdef CONFIG_CMD_KGDB | |
113 | #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ | |
bc3a4a53 MV |
114 | #endif |
115 | ||
116 | /* | |
117 | * HUSH Shell Configuration | |
118 | */ | |
119 | #define CONFIG_SYS_HUSH_PARSER 1 | |
bc3a4a53 MV |
120 | |
121 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ | |
122 | #ifdef CONFIG_SYS_HUSH_PARSER | |
123 | #define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */ | |
bc3a4a53 MV |
124 | #endif |
125 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ | |
126 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ | |
127 | #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ | |
128 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ | |
129 | #define CONFIG_SYS_DEVICE_NULLDEV 1 | |
130 | ||
131 | /* | |
132 | * Clock Configuration | |
133 | */ | |
bc3a4a53 MV |
134 | #define CONFIG_SYS_CPUSPEED 0x190 /* standard setting for 312MHz; L=16, N=1.5, A=0, SDCLK!=SystemBus */ |
135 | ||
76d4ae25 VK |
136 | /* |
137 | * SRAM Map | |
138 | */ | |
139 | #define PHYS_SRAM 0x5c000000 /* SRAM Bank #1 */ | |
140 | #define PHYS_SRAM_SIZE 0x00040000 /* 256k */ | |
141 | ||
bc3a4a53 MV |
142 | /* |
143 | * DRAM Map | |
144 | */ | |
145 | #define CONFIG_NR_DRAM_BANKS 1 /* We have 1 bank of DRAM */ | |
146 | #define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ | |
147 | #define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ | |
148 | ||
149 | #define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */ | |
150 | #define CONFIG_SYS_DRAM_SIZE 0x02000000 /* 32 MB DRAM */ | |
151 | ||
152 | #define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ | |
153 | #define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ | |
154 | ||
155 | #define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_DRAM_BASE | |
156 | ||
6ef6eb91 | 157 | #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 |
76d4ae25 | 158 | #define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SRAM + 2048) |
6ef6eb91 | 159 | |
bc3a4a53 MV |
160 | /* |
161 | * NOR FLASH | |
162 | */ | |
163 | #define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ | |
164 | #define PHYS_FLASH_SIZE 0x00800000 /* 8 MB */ | |
165 | #define PHYS_FLASH_SECT_SIZE 0x00010000 /* 64 KB sectors */ | |
166 | #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 | |
167 | ||
168 | #define CONFIG_SYS_FLASH_CFI | |
169 | #define CONFIG_FLASH_CFI_DRIVER 1 | |
170 | #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT | |
171 | ||
172 | #define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 | |
173 | #define CONFIG_SYS_MONITOR_LEN PHYS_FLASH_SECT_SIZE | |
174 | ||
175 | #define CONFIG_SYS_MAX_FLASH_BANKS 1 | |
176 | #define CONFIG_SYS_MAX_FLASH_SECT 256 | |
177 | ||
178 | #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 | |
179 | ||
f90aea2a MV |
180 | #define CONFIG_SYS_FLASH_ERASE_TOUT 240000 |
181 | #define CONFIG_SYS_FLASH_WRITE_TOUT 240000 | |
182 | #define CONFIG_SYS_FLASH_LOCK_TOUT 240000 | |
183 | #define CONFIG_SYS_FLASH_UNLOCK_TOUT 240000 | |
bc3a4a53 MV |
184 | #define CONFIG_SYS_FLASH_PROTECTION |
185 | ||
186 | /* | |
187 | * GPIO settings | |
188 | */ | |
189 | #define CONFIG_SYS_GAFR0_L_VAL 0x02000140 | |
190 | #define CONFIG_SYS_GAFR0_U_VAL 0x59188000 | |
191 | #define CONFIG_SYS_GAFR1_L_VAL 0x63900002 | |
192 | #define CONFIG_SYS_GAFR1_U_VAL 0xaaa03950 | |
193 | #define CONFIG_SYS_GAFR2_L_VAL 0x0aaaaaaa | |
194 | #define CONFIG_SYS_GAFR2_U_VAL 0x29000308 | |
195 | #define CONFIG_SYS_GAFR3_L_VAL 0x54000000 | |
196 | #define CONFIG_SYS_GAFR3_U_VAL 0x000000d5 | |
197 | #define CONFIG_SYS_GPCR0_VAL 0x00000000 | |
198 | #define CONFIG_SYS_GPCR1_VAL 0x00000020 | |
199 | #define CONFIG_SYS_GPCR2_VAL 0x00000000 | |
200 | #define CONFIG_SYS_GPCR3_VAL 0x00000000 | |
201 | #define CONFIG_SYS_GPDR0_VAL 0xdafcee00 | |
202 | #define CONFIG_SYS_GPDR1_VAL 0xffa3aaab | |
24e84c3d | 203 | #define CONFIG_SYS_GPDR2_VAL 0x8fe9ffff |
bc3a4a53 MV |
204 | #define CONFIG_SYS_GPDR3_VAL 0x001b1f8a |
205 | #define CONFIG_SYS_GPSR0_VAL 0x06080400 | |
206 | #define CONFIG_SYS_GPSR1_VAL 0x007f0000 | |
207 | #define CONFIG_SYS_GPSR2_VAL 0x032a0000 | |
208 | #define CONFIG_SYS_GPSR3_VAL 0x00000180 | |
209 | ||
210 | #define CONFIG_SYS_PSSR_VAL 0x30 | |
211 | ||
212 | /* | |
213 | * Clock settings | |
214 | */ | |
215 | #define CONFIG_SYS_CKEN 0x00511220 | |
216 | #define CONFIG_SYS_CCCR 0x00000190 | |
217 | ||
218 | /* | |
219 | * Memory settings | |
220 | */ | |
221 | #define CONFIG_SYS_MSC0_VAL 0x2ffc38f8 | |
222 | #define CONFIG_SYS_MSC1_VAL 0x0000ccd1 | |
223 | #define CONFIG_SYS_MSC2_VAL 0x0000b884 | |
224 | #define CONFIG_SYS_MDCNFG_VAL 0x08000ba9 | |
225 | #define CONFIG_SYS_MDREFR_VAL 0x2011a01e | |
226 | #define CONFIG_SYS_MDMRS_VAL 0x00000000 | |
227 | #define CONFIG_SYS_FLYCNFG_VAL 0x00010001 | |
228 | #define CONFIG_SYS_SXCNFG_VAL 0x40044004 | |
229 | ||
230 | /* | |
231 | * PCMCIA and CF Interfaces | |
232 | */ | |
233 | #define CONFIG_SYS_MECR_VAL 0x00000001 | |
234 | #define CONFIG_SYS_MCMEM0_VAL 0x00014307 | |
235 | #define CONFIG_SYS_MCMEM1_VAL 0x00014307 | |
236 | #define CONFIG_SYS_MCATT0_VAL 0x0001c787 | |
237 | #define CONFIG_SYS_MCATT1_VAL 0x0001c787 | |
238 | #define CONFIG_SYS_MCIO0_VAL 0x0001430f | |
239 | #define CONFIG_SYS_MCIO1_VAL 0x0001430f | |
240 | ||
241 | #endif /* __CONFIG_H */ |