[u-boot.git] / include / configs / zmx25.h

/*
 * (c) 2011 Graf-Syteco, Matthias Weisser
 * <weisserm@arcor.de>
 *
 * Configuation settings for the zmx25 board
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include <asm/arch/imx-regs.h>

#define CONFIG_MX25
#define CONFIG_SYS_TEXT_BASE		0xA0000000


#define CONFIG_SYS_TIMER_RATE		32768
#define CONFIG_SYS_TIMER_COUNTER	\
	(&((struct gpt_regs *)IMX_GPT1_BASE)->counter)

#define CONFIG_MACH_TYPE	MACH_TYPE_ZMX25
/*
 * Environment settings
 */
#define CONFIG_EXTRA_ENV_SETTINGS \
	"gs_fast_boot=setenv bootdelay 5\0" \
	"gs_slow_boot=setenv bootdelay 10\0" \
	"bootcmd=dcache off; mw.l 0x81000000 0 1024; usb start;" \
		"fatls usb 0; fatload usb 0 0x81000000 zmx25-init.bin;" \
		"bootm 0x81000000; bootelf 0x81000000\0"

#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs	*/
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_BOARD_LATE_INIT

/*
 * Compressions
 */
#define CONFIG_LZO

/*
 * Hardware drivers
 */

/*
 * GPIO
 */
#define CONFIG_MXC_GPIO

/*
 * Serial
 */
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE	UART2_BASE
#define CONFIG_CONS_INDEX	1	/* use UART2 for console */
#define CONFIG_BAUDRATE		115200	/* Default baud rate */

/*
 * Ethernet
 */
#define CONFIG_FEC_MXC
#define CONFIG_FEC_MXC_PHYADDR		0x00
#define CONFIG_MII

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME

/*
 * Command line configuration.
 */
#define CONFIG_CMD_CACHE

/*
 * Additional command
 */
#define CONFIG_CMD_FAT


/*
 * USB
 */
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_EHCI			/* Enable EHCI USB support */
#define CONFIG_USB_EHCI_MXC
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_MXC_USB_PORT	1
#define CONFIG_MXC_USB_PORTSC	MXC_EHCI_MODE_SERIAL
#define CONFIG_MXC_USB_FLAGS	(MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN)
#define CONFIG_EHCI_IS_TDI
#define CONFIG_USB_STORAGE
#define CONFIG_DOS_PARTITION
#define CONFIG_SUPPORT_VFAT
#endif /* CONFIG_CMD_USB */

/* SDRAM */
#define CONFIG_NR_DRAM_BANKS	1
#define PHYS_SDRAM		0x80000000	/* start address of LPDDRRAM */
#define PHYS_SDRAM_SIZE		0x04000000	/* 64 megs */

#define CONFIG_SYS_SDRAM_BASE	PHYS_SDRAM
#define CONFIG_SYS_INIT_SP_ADDR	0x78020000	/* end of internal SRAM */

/*
 * FLASH and environment organization
 */
#define CONFIG_SYS_FLASH_BASE		0xA0000000
#define CONFIG_SYS_MAX_FLASH_BANKS	1
#define CONFIG_SYS_MAX_FLASH_SECT	256

#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x00040000)
#define CONFIG_ENV_IS_IN_FLASH		1
#define CONFIG_ENV_SECT_SIZE		(128 * 1024)
#define CONFIG_ENV_SIZE			(128 * 1024)

/*
 * CFI FLASH driver setup
 */
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	/* ~10x faster */

#define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE

#define CONFIG_SYS_MEMTEST_START	(PHYS_SDRAM + (512*1024))
#define CONFIG_SYS_MEMTEST_END		(PHYS_SDRAM + PHYS_SDRAM_SIZE)

#define CONFIG_SYS_CBSIZE	256
#define CONFIG_SYS_MAXARGS	16
#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + \
				sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_LONGHELP
#define CONFIG_CMDLINE_EDITING

#define CONFIG_PREBOOT  ""

#define CONFIG_BOOTDELAY	5

/*
 * Size of malloc() pool
 */
#define CONFIG_SYS_MALLOC_LEN		(0x400000 - 0x8000)

#endif	/* __CONFIG_H */
Commit	Line	Data
39f0023e MW	1	/*
	2	* (c) 2011 Graf-Syteco, Matthias Weisser
	3	* <weisserm@arcor.de>
	4	*
	5	* Configuation settings for the zmx25 board
	6	*
1a459660	7	* SPDX-License-Identifier: GPL-2.0+
39f0023e MW	8	*/
	9
	10	#ifndef __CONFIG_H
	11	#define __CONFIG_H
	12
3dae5b51 RH	13	#include <asm/arch/imx-regs.h>
3dae5b51 RH	14
39f0023e	15	#define CONFIG_MX25
39f0023e MW	16	#define CONFIG_SYS_TEXT_BASE 0xA0000000
39f0023e MW	17
47d8ae40	18
3dae5b51 RH	19	#define CONFIG_SYS_TIMER_RATE 32768
	20	#define CONFIG_SYS_TIMER_COUNTER \
	21	(&((struct gpt_regs *)IMX_GPT1_BASE)->counter)
	22
9ba24f17	23	#define CONFIG_MACH_TYPE MACH_TYPE_ZMX25
39f0023e MW	24	/*
	25	* Environment settings
	26	*/
	27	#define CONFIG_EXTRA_ENV_SETTINGS \
	28	"gs_fast_boot=setenv bootdelay 5\0" \
	29	"gs_slow_boot=setenv bootdelay 10\0" \
	30	"bootcmd=dcache off; mw.l 0x81000000 0 1024; usb start;" \
	31	"fatls usb 0; fatload usb 0 0x81000000 zmx25-init.bin;" \
	32	"bootm 0x81000000; bootelf 0x81000000\0"
	33
	34	#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
	35	#define CONFIG_SETUP_MEMORY_TAGS
	36	#define CONFIG_INITRD_TAG
9660e442	37	#define CONFIG_BOARD_LATE_INIT
39f0023e MW	38
	39	/*
	40	* Compressions
	41	*/
	42	#define CONFIG_LZO
	43
	44	/*
	45	* Hardware drivers
	46	*/
	47
	48	/*
	49	* GPIO
	50	*/
	51	#define CONFIG_MXC_GPIO
	52
	53	/*
	54	* Serial
	55	*/
	56	#define CONFIG_MXC_UART
40f6fffe	57	#define CONFIG_MXC_UART_BASE UART2_BASE
39f0023e MW	58	#define CONFIG_CONS_INDEX 1 /* use UART2 for console */
39f0023e MW	59	#define CONFIG_BAUDRATE 115200 /* Default baud rate */
39f0023e MW	60
	61	/*
	62	* Ethernet
	63	*/
	64	#define CONFIG_FEC_MXC
	65	#define CONFIG_FEC_MXC_PHYADDR 0x00
	66	#define CONFIG_MII
39f0023e MW	67
	68	/*
	69	* BOOTP options
	70	*/
	71	#define CONFIG_BOOTP_BOOTFILESIZE
	72	#define CONFIG_BOOTP_BOOTPATH
	73	#define CONFIG_BOOTP_GATEWAY
	74	#define CONFIG_BOOTP_HOSTNAME
	75
	76	/*
	77	* Command line configuration.
	78	*/
39f0023e MW	79	#define CONFIG_CMD_CACHE
39f0023e MW	80
39f0023e MW	81	/*
	82	* Additional command
	83	*/
39f0023e	84	#define CONFIG_CMD_FAT
39f0023e	85
39f0023e MW	86
	87	/*
	88	* USB
	89	*/
	90	#ifdef CONFIG_CMD_USB
	91	#define CONFIG_USB_EHCI /* Enable EHCI USB support */
	92	#define CONFIG_USB_EHCI_MXC
	93	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
9fa3d093 BT	94	#define CONFIG_MXC_USB_PORT 1
	95	#define CONFIG_MXC_USB_PORTSC MXC_EHCI_MODE_SERIAL
	96	#define CONFIG_MXC_USB_FLAGS (MXC_EHCI_INTERNAL_PHY \| MXC_EHCI_IPPUE_DOWN)
39f0023e MW	97	#define CONFIG_EHCI_IS_TDI
	98	#define CONFIG_USB_STORAGE
	99	#define CONFIG_DOS_PARTITION
	100	#define CONFIG_SUPPORT_VFAT
	101	#endif /* CONFIG_CMD_USB */
	102
	103	/* SDRAM */
	104	#define CONFIG_NR_DRAM_BANKS 1
	105	#define PHYS_SDRAM 0x80000000 /* start address of LPDDRRAM */
	106	#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */
	107
	108	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	109	#define CONFIG_SYS_INIT_SP_ADDR 0x78020000 /* end of internal SRAM */
	110
	111	/*
	112	* FLASH and environment organization
	113	*/
	114	#define CONFIG_SYS_FLASH_BASE 0xA0000000
	115	#define CONFIG_SYS_MAX_FLASH_BANKS 1
	116	#define CONFIG_SYS_MAX_FLASH_SECT 256
	117
	118	#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00040000)
	119	#define CONFIG_ENV_IS_IN_FLASH 1
	120	#define CONFIG_ENV_SECT_SIZE (128 * 1024)
	121	#define CONFIG_ENV_SIZE (128 * 1024)
	122
	123	/*
	124	* CFI FLASH driver setup
	125	*/
	126	#define CONFIG_SYS_FLASH_CFI
	127	#define CONFIG_FLASH_CFI_DRIVER
	128	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* ~10x faster */
	129
	130	#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
	131
	132	#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM + (512*1024))
	133	#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM + PHYS_SDRAM_SIZE)
	134
39f0023e MW	135	#define CONFIG_SYS_CBSIZE 256
	136	#define CONFIG_SYS_MAXARGS 16
	137	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	138	sizeof(CONFIG_SYS_PROMPT) + 16)
	139	#define CONFIG_SYS_LONGHELP
	140	#define CONFIG_CMDLINE_EDITING
	141
	142	#define CONFIG_PREBOOT ""
	143
	144	#define CONFIG_BOOTDELAY 5
39f0023e MW	145
	146	/*
	147	* Size of malloc() pool
	148	*/
	149	#define CONFIG_SYS_MALLOC_LEN (0x400000 - 0x8000)
39f0023e MW	150
39f0023e MW	151	#endif /* __CONFIG_H */