[thirdparty/u-boot.git] / include / fsl_qe.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright (C) 2006-2009 Freescale Semiconductor, Inc.
 *
 * Dave Liu <daveliu@freescale.com>
 * based on source code of Shlomi Gridish
 */

#ifndef __QE_H__
#define __QE_H__

#ifdef CONFIG_U_QE
#include <linux/immap_qe.h>
#endif

#define QE_NUM_OF_BRGS	16
#define UCC_MAX_NUM	8

#define QE_DATAONLY_BASE	0
#define QE_DATAONLY_SIZE	(QE_MURAM_SIZE - QE_DATAONLY_BASE)

struct udevice;

/* QE threads SNUM
*/
typedef enum qe_snum_state {
	QE_SNUM_STATE_USED,   /* used */
	QE_SNUM_STATE_FREE    /* free */
} qe_snum_state_e;

typedef struct qe_snum {
	u8		num;   /* snum	*/
	qe_snum_state_e	state; /* state */
} qe_snum_t;

/* QE RISC allocation
*/
#define	QE_RISC_ALLOCATION_RISC1	0x1  /* RISC 1 */
#define	QE_RISC_ALLOCATION_RISC2	0x2  /* RISC 2 */
#define	QE_RISC_ALLOCATION_RISC3	0x4  /* RISC 3 */
#define	QE_RISC_ALLOCATION_RISC4	0x8  /* RISC 4 */
#define	QE_RISC_ALLOCATION_RISC1_AND_RISC2	(QE_RISC_ALLOCATION_RISC1 | \
						 QE_RISC_ALLOCATION_RISC2)
#define	QE_RISC_ALLOCATION_FOUR_RISCS	(QE_RISC_ALLOCATION_RISC1 | \
					 QE_RISC_ALLOCATION_RISC2 | \
					 QE_RISC_ALLOCATION_RISC3 | \
					 QE_RISC_ALLOCATION_RISC4)

/* QE CECR commands for UCC fast.
*/
#define QE_CR_FLG			0x00010000
#define QE_RESET			0x80000000
#define QE_INIT_TX_RX			0x00000000
#define QE_INIT_RX			0x00000001
#define QE_INIT_TX			0x00000002
#define QE_ENTER_HUNT_MODE		0x00000003
#define QE_STOP_TX			0x00000004
#define QE_GRACEFUL_STOP_TX		0x00000005
#define QE_RESTART_TX			0x00000006
#define QE_SWITCH_COMMAND		0x00000007
#define QE_SET_GROUP_ADDRESS		0x00000008
#define QE_INSERT_CELL			0x00000009
#define QE_ATM_TRANSMIT			0x0000000a
#define QE_CELL_POOL_GET		0x0000000b
#define QE_CELL_POOL_PUT		0x0000000c
#define QE_IMA_HOST_CMD			0x0000000d
#define QE_ATM_MULTI_THREAD_INIT	0x00000011
#define QE_ASSIGN_PAGE			0x00000012
#define QE_START_FLOW_CONTROL		0x00000014
#define QE_STOP_FLOW_CONTROL		0x00000015
#define QE_ASSIGN_PAGE_TO_DEVICE	0x00000016
#define QE_GRACEFUL_STOP_RX		0x0000001a
#define QE_RESTART_RX			0x0000001b

/* QE CECR Sub Block Code - sub block code of QE command.
*/
#define QE_CR_SUBBLOCK_INVALID		0x00000000
#define QE_CR_SUBBLOCK_USB		0x03200000
#define QE_CR_SUBBLOCK_UCCFAST1		0x02000000
#define QE_CR_SUBBLOCK_UCCFAST2		0x02200000
#define QE_CR_SUBBLOCK_UCCFAST3		0x02400000
#define QE_CR_SUBBLOCK_UCCFAST4		0x02600000
#define QE_CR_SUBBLOCK_UCCFAST5		0x02800000
#define QE_CR_SUBBLOCK_UCCFAST6		0x02a00000
#define QE_CR_SUBBLOCK_UCCFAST7		0x02c00000
#define QE_CR_SUBBLOCK_UCCFAST8		0x02e00000
#define QE_CR_SUBBLOCK_UCCSLOW1		0x00000000
#define QE_CR_SUBBLOCK_UCCSLOW2		0x00200000
#define QE_CR_SUBBLOCK_UCCSLOW3		0x00400000
#define QE_CR_SUBBLOCK_UCCSLOW4		0x00600000
#define QE_CR_SUBBLOCK_UCCSLOW5		0x00800000
#define QE_CR_SUBBLOCK_UCCSLOW6		0x00a00000
#define QE_CR_SUBBLOCK_UCCSLOW7		0x00c00000
#define QE_CR_SUBBLOCK_UCCSLOW8		0x00e00000
#define QE_CR_SUBBLOCK_MCC1		0x03800000
#define QE_CR_SUBBLOCK_MCC2		0x03a00000
#define QE_CR_SUBBLOCK_MCC3		0x03000000
#define QE_CR_SUBBLOCK_IDMA1		0x02800000
#define QE_CR_SUBBLOCK_IDMA2		0x02a00000
#define QE_CR_SUBBLOCK_IDMA3		0x02c00000
#define QE_CR_SUBBLOCK_IDMA4		0x02e00000
#define QE_CR_SUBBLOCK_HPAC		0x01e00000
#define QE_CR_SUBBLOCK_SPI1		0x01400000
#define QE_CR_SUBBLOCK_SPI2		0x01600000
#define QE_CR_SUBBLOCK_RAND		0x01c00000
#define QE_CR_SUBBLOCK_TIMER		0x01e00000
#define QE_CR_SUBBLOCK_GENERAL		0x03c00000

/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command.
*/
#define QE_CR_PROTOCOL_UNSPECIFIED	0x00 /* For all other protocols */
#define QE_CR_PROTOCOL_HDLC_TRANSPARENT	0x00
#define QE_CR_PROTOCOL_ATM_POS		0x0A
#define QE_CR_PROTOCOL_ETHERNET		0x0C
#define QE_CR_PROTOCOL_L2_SWITCH	0x0D
#define QE_CR_PROTOCOL_SHIFT		6

/* QE ASSIGN PAGE command
*/
#define QE_CR_ASSIGN_PAGE_SNUM_SHIFT	17

/* Communication Direction.
*/
typedef enum comm_dir {
	COMM_DIR_NONE		= 0,
	COMM_DIR_RX		= 1,
	COMM_DIR_TX		= 2,
	COMM_DIR_RX_AND_TX	= 3
} comm_dir_e;

/* Clocks and BRG's
*/
typedef enum qe_clock {
	QE_CLK_NONE = 0,
	QE_BRG1,     /* Baud Rate Generator  1 */
	QE_BRG2,     /* Baud Rate Generator  2 */
	QE_BRG3,     /* Baud Rate Generator  3 */
	QE_BRG4,     /* Baud Rate Generator  4 */
	QE_BRG5,     /* Baud Rate Generator  5 */
	QE_BRG6,     /* Baud Rate Generator  6 */
	QE_BRG7,     /* Baud Rate Generator  7 */
	QE_BRG8,     /* Baud Rate Generator  8 */
	QE_BRG9,     /* Baud Rate Generator  9 */
	QE_BRG10,    /* Baud Rate Generator 10 */
	QE_BRG11,    /* Baud Rate Generator 11 */
	QE_BRG12,    /* Baud Rate Generator 12 */
	QE_BRG13,    /* Baud Rate Generator 13 */
	QE_BRG14,    /* Baud Rate Generator 14 */
	QE_BRG15,    /* Baud Rate Generator 15 */
	QE_BRG16,    /* Baud Rate Generator 16 */
	QE_CLK1,     /* Clock  1	       */
	QE_CLK2,     /* Clock  2	       */
	QE_CLK3,     /* Clock  3	       */
	QE_CLK4,     /* Clock  4	       */
	QE_CLK5,     /* Clock  5	       */
	QE_CLK6,     /* Clock  6	       */
	QE_CLK7,     /* Clock  7	       */
	QE_CLK8,     /* Clock  8	       */
	QE_CLK9,     /* Clock  9	       */
	QE_CLK10,    /* Clock 10	       */
	QE_CLK11,    /* Clock 11	       */
	QE_CLK12,    /* Clock 12	       */
	QE_CLK13,    /* Clock 13	       */
	QE_CLK14,    /* Clock 14	       */
	QE_CLK15,    /* Clock 15	       */
	QE_CLK16,    /* Clock 16	       */
	QE_CLK17,    /* Clock 17	       */
	QE_CLK18,    /* Clock 18	       */
	QE_CLK19,    /* Clock 19	       */
	QE_CLK20,    /* Clock 20	       */
	QE_CLK21,    /* Clock 21	       */
	QE_CLK22,    /* Clock 22	       */
	QE_CLK23,    /* Clock 23	       */
	QE_CLK24,    /* Clock 24	       */
	QE_CLK_DUMMY
} qe_clock_e;

/* QE CMXGCR register
*/
#define QE_CMXGCR_MII_ENET_MNG_MASK	0x00007000
#define QE_CMXGCR_MII_ENET_MNG_SHIFT	12

/* QE CMXUCR registers
 */
#define QE_CMXUCR_TX_CLK_SRC_MASK	0x0000000F

/* QE BRG configuration register
*/
#define QE_BRGC_ENABLE			0x00010000
#define QE_BRGC_DIVISOR_SHIFT		1
#define QE_BRGC_DIVISOR_MAX		0xFFF
#define QE_BRGC_DIV16			1

/* QE SDMA registers
*/
#define QE_SDSR_BER1			0x02000000
#define QE_SDSR_BER2			0x01000000

#define QE_SDMR_GLB_1_MSK		0x80000000
#define QE_SDMR_ADR_SEL			0x20000000
#define QE_SDMR_BER1_MSK		0x02000000
#define QE_SDMR_BER2_MSK		0x01000000
#define QE_SDMR_EB1_MSK			0x00800000
#define QE_SDMR_ER1_MSK			0x00080000
#define QE_SDMR_ER2_MSK			0x00040000
#define QE_SDMR_CEN_MASK		0x0000E000
#define QE_SDMR_SBER_1			0x00000200
#define QE_SDMR_SBER_2			0x00000200
#define QE_SDMR_EB1_PR_MASK		0x000000C0
#define QE_SDMR_ER1_PR			0x00000008

#define QE_SDMR_CEN_SHIFT		13
#define QE_SDMR_EB1_PR_SHIFT		6

#define QE_SDTM_MSNUM_SHIFT		24

#define QE_SDEBCR_BA_MASK		0x01FFFFFF

/* Communication Processor */
#define QE_CP_CERCR_MEE		0x8000	/* Multi-user RAM ECC enable */
#define QE_CP_CERCR_IEE		0x4000	/* Instruction RAM ECC enable */
#define QE_CP_CERCR_CIR		0x0800	/* Common instruction RAM */

/* I-RAM */
#define QE_IRAM_IADD_AIE	0x80000000	/* Auto Increment Enable */
#define QE_IRAM_IADD_BADDR	0x00080000	/* Base Address */
#define QE_IRAM_READY		0x80000000

/* Structure that defines QE firmware binary files.
 *
 * See Documentation/powerpc/qe_firmware.rst in the Linux kernel tree for
 * a description of these fields.
 */
struct qe_firmware {
	struct qe_header {
		u32 length;	/* Length of the entire structure, in bytes */
		u8 magic[3];	/* Set to { 'Q', 'E', 'F' } */
		u8 version;	/* Version of this layout. First ver is '1' */
	} header;
	u8 id[62];		/* Null-terminated identifier string */
	u8 split;		/* 0 = shared I-RAM, 1 = split I-RAM */
	u8 count;		/* Number of microcode[] structures */
	struct {
		u16 model;	/* The SOC model  */
		u8 major;	/* The SOC revision major */
		u8 minor;	/* The SOC revision minor */
	} __attribute__ ((packed)) soc;
	u8 padding[4];		/* Reserved, for alignment */
	u64 extended_modes;	/* Extended modes */
	u32 vtraps[8];		/* Virtual trap addresses */
	u8 reserved[4];		/* Reserved, for future expansion */
	struct qe_microcode {
		u8 id[32];	/* Null-terminated identifier */
		u32 traps[16];	/* Trap addresses, 0 == ignore */
		u32 eccr;	/* The value for the ECCR register */
		u32 iram_offset;/* Offset into I-RAM for the code */
		u32 count;	/* Number of 32-bit words of the code */
		u32 code_offset;/* Offset of the actual microcode */
		u8 major;	/* The microcode version major */
		u8 minor;	/* The microcode version minor */
		u8 revision;	/* The microcode version revision */
		u8 padding;	/* Reserved, for alignment */
		u8 reserved[4];	/* Reserved, for future expansion */
	} __attribute__ ((packed)) microcode[1];
	/* All microcode binaries should be located here */
	/* CRC32 should be located here, after the microcode binaries */
} __attribute__ ((packed));

struct qe_firmware_info {
	char id[64];		/* Firmware name */
	u32 vtraps[8];		/* Virtual trap addresses */
	u64 extended_modes;	/* Extended modes */
};

void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign);
void qe_issue_cmd(uint cmd, uint sbc, u8 mcn, u32 cmd_data);
uint qe_muram_alloc(uint size, uint align);
void *qe_muram_addr(uint offset);
int qe_get_snum(void);
void qe_put_snum(u8 snum);
void qe_init(uint qe_base);
void qe_reset(void);
void qe_assign_page(uint snum, uint para_ram_base);
int qe_set_brg(uint brg, uint rate);
int qe_set_mii_clk_src(int ucc_num);
int qe_upload_firmware(const struct qe_firmware *firmware);
struct qe_firmware_info *qe_get_firmware_info(void);
void ft_qe_setup(void *blob);
void qe_init(uint qe_base);
void qe_reset(void);

#ifdef CONFIG_U_QE
void u_qe_init(void);
int u_qe_upload_firmware(const struct qe_firmware *firmware);
void u_qe_resume(void);
int u_qe_firmware_resume(const struct qe_firmware *firmware,
			 qe_map_t *qe_immrr);
#endif

#if defined(CONFIG_PINCTRL)
int par_io_of_config(struct udevice *dev);
#endif
#endif /* __QE_H__ */
Commit	Line	Data
83d290c5	1	/* SPDX-License-Identifier: GPL-2.0+ */
7737d5c6	2	/*
7211fbfa	3	* Copyright (C) 2006-2009 Freescale Semiconductor, Inc.
7737d5c6 DL	4	*
	5	* Dave Liu <daveliu@freescale.com>
	6	* based on source code of Shlomi Gridish
7737d5c6 DL	7	*/
	8
	9	#ifndef __QE_H__
	10	#define __QE_H__
	11
ae42eb03 ZQ	12	#ifdef CONFIG_U_QE
	13	#include <linux/immap_qe.h>
	14	#endif
7737d5c6	15
7737d5c6 DL	16	#define QE_NUM_OF_BRGS 16
	17	#define UCC_MAX_NUM 8
	18
ff9658d7	19	#define QE_DATAONLY_BASE 0
24c3aca3	20	#define QE_DATAONLY_SIZE (QE_MURAM_SIZE - QE_DATAONLY_BASE)
7737d5c6	21
401d1c4f SG	22	struct udevice;
401d1c4f SG	23
7737d5c6 DL	24	/* QE threads SNUM
	25	*/
	26	typedef enum qe_snum_state {
	27	QE_SNUM_STATE_USED, /* used */
	28	QE_SNUM_STATE_FREE /* free */
	29	} qe_snum_state_e;
	30
	31	typedef struct qe_snum {
53677ef1	32	u8 num; /* snum */
7737d5c6 DL	33	qe_snum_state_e state; /* state */
	34	} qe_snum_t;
	35
	36	/* QE RISC allocation
	37	*/
7211fbfa HW	38	#define QE_RISC_ALLOCATION_RISC1 0x1 /* RISC 1 */
	39	#define QE_RISC_ALLOCATION_RISC2 0x2 /* RISC 2 */
	40	#define QE_RISC_ALLOCATION_RISC3 0x4 /* RISC 3 */
	41	#define QE_RISC_ALLOCATION_RISC4 0x8 /* RISC 4 */
0cf207ec	42	#define QE_RISC_ALLOCATION_RISC1_AND_RISC2 (QE_RISC_ALLOCATION_RISC1 \| \
7211fbfa HW	43	QE_RISC_ALLOCATION_RISC2)
	44	#define QE_RISC_ALLOCATION_FOUR_RISCS (QE_RISC_ALLOCATION_RISC1 \| \
	45	QE_RISC_ALLOCATION_RISC2 \| \
	46	QE_RISC_ALLOCATION_RISC3 \| \
	47	QE_RISC_ALLOCATION_RISC4)
7737d5c6 DL	48
	49	/* QE CECR commands for UCC fast.
	50	*/
	51	#define QE_CR_FLG 0x00010000
	52	#define QE_RESET 0x80000000
	53	#define QE_INIT_TX_RX 0x00000000
	54	#define QE_INIT_RX 0x00000001
	55	#define QE_INIT_TX 0x00000002
	56	#define QE_ENTER_HUNT_MODE 0x00000003
	57	#define QE_STOP_TX 0x00000004
	58	#define QE_GRACEFUL_STOP_TX 0x00000005
	59	#define QE_RESTART_TX 0x00000006
	60	#define QE_SWITCH_COMMAND 0x00000007
	61	#define QE_SET_GROUP_ADDRESS 0x00000008
	62	#define QE_INSERT_CELL 0x00000009
	63	#define QE_ATM_TRANSMIT 0x0000000a
	64	#define QE_CELL_POOL_GET 0x0000000b
	65	#define QE_CELL_POOL_PUT 0x0000000c
	66	#define QE_IMA_HOST_CMD 0x0000000d
	67	#define QE_ATM_MULTI_THREAD_INIT 0x00000011
	68	#define QE_ASSIGN_PAGE 0x00000012
	69	#define QE_START_FLOW_CONTROL 0x00000014
	70	#define QE_STOP_FLOW_CONTROL 0x00000015
	71	#define QE_ASSIGN_PAGE_TO_DEVICE 0x00000016
	72	#define QE_GRACEFUL_STOP_RX 0x0000001a
	73	#define QE_RESTART_RX 0x0000001b
	74
	75	/* QE CECR Sub Block Code - sub block code of QE command.
	76	*/
	77	#define QE_CR_SUBBLOCK_INVALID 0x00000000
	78	#define QE_CR_SUBBLOCK_USB 0x03200000
	79	#define QE_CR_SUBBLOCK_UCCFAST1 0x02000000
	80	#define QE_CR_SUBBLOCK_UCCFAST2 0x02200000
	81	#define QE_CR_SUBBLOCK_UCCFAST3 0x02400000
	82	#define QE_CR_SUBBLOCK_UCCFAST4 0x02600000
	83	#define QE_CR_SUBBLOCK_UCCFAST5 0x02800000
	84	#define QE_CR_SUBBLOCK_UCCFAST6 0x02a00000
	85	#define QE_CR_SUBBLOCK_UCCFAST7 0x02c00000
	86	#define QE_CR_SUBBLOCK_UCCFAST8 0x02e00000
	87	#define QE_CR_SUBBLOCK_UCCSLOW1 0x00000000
	88	#define QE_CR_SUBBLOCK_UCCSLOW2 0x00200000
	89	#define QE_CR_SUBBLOCK_UCCSLOW3 0x00400000
	90	#define QE_CR_SUBBLOCK_UCCSLOW4 0x00600000
	91	#define QE_CR_SUBBLOCK_UCCSLOW5 0x00800000
	92	#define QE_CR_SUBBLOCK_UCCSLOW6 0x00a00000
	93	#define QE_CR_SUBBLOCK_UCCSLOW7 0x00c00000
	94	#define QE_CR_SUBBLOCK_UCCSLOW8 0x00e00000
	95	#define QE_CR_SUBBLOCK_MCC1 0x03800000
	96	#define QE_CR_SUBBLOCK_MCC2 0x03a00000
	97	#define QE_CR_SUBBLOCK_MCC3 0x03000000
	98	#define QE_CR_SUBBLOCK_IDMA1 0x02800000
	99	#define QE_CR_SUBBLOCK_IDMA2 0x02a00000
	100	#define QE_CR_SUBBLOCK_IDMA3 0x02c00000
	101	#define QE_CR_SUBBLOCK_IDMA4 0x02e00000
	102	#define QE_CR_SUBBLOCK_HPAC 0x01e00000
	103	#define QE_CR_SUBBLOCK_SPI1 0x01400000
	104	#define QE_CR_SUBBLOCK_SPI2 0x01600000
	105	#define QE_CR_SUBBLOCK_RAND 0x01c00000
	106	#define QE_CR_SUBBLOCK_TIMER 0x01e00000
	107	#define QE_CR_SUBBLOCK_GENERAL 0x03c00000
	108
	109	/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command.
	110	*/
	111	#define QE_CR_PROTOCOL_UNSPECIFIED 0x00 /* For all other protocols */
112	#define QE_CR_PROTOCOL_HDLC_TRANSPARENT 0x00
113	#define QE_CR_PROTOCOL_ATM_POS 0x0A
114	#define QE_CR_PROTOCOL_ETHERNET 0x0C
115	#define QE_CR_PROTOCOL_L2_SWITCH 0x0D
116	#define QE_CR_PROTOCOL_SHIFT 6
117
118	/* QE ASSIGN PAGE command
119	*/
120	#define QE_CR_ASSIGN_PAGE_SNUM_SHIFT 17
121
122	/* Communication Direction.
123	*/
124	typedef enum comm_dir {
125	COMM_DIR_NONE = 0,
126	COMM_DIR_RX = 1,
127	COMM_DIR_TX = 2,
128	COMM_DIR_RX_AND_TX = 3
129	} comm_dir_e;
130
131	/* Clocks and BRG's
132	*/
133	typedef enum qe_clock {
134	QE_CLK_NONE = 0,
135	QE_BRG1, /* Baud Rate Generator 1 */
136	QE_BRG2, /* Baud Rate Generator 2 */
137	QE_BRG3, /* Baud Rate Generator 3 */
138	QE_BRG4, /* Baud Rate Generator 4 */
139	QE_BRG5, /* Baud Rate Generator 5 */
140	QE_BRG6, /* Baud Rate Generator 6 */
141	QE_BRG7, /* Baud Rate Generator 7 */
142	QE_BRG8, /* Baud Rate Generator 8 */
143	QE_BRG9, /* Baud Rate Generator 9 */
144	QE_BRG10, /* Baud Rate Generator 10 */
145	QE_BRG11, /* Baud Rate Generator 11 */
146	QE_BRG12, /* Baud Rate Generator 12 */
147	QE_BRG13, /* Baud Rate Generator 13 */
148	QE_BRG14, /* Baud Rate Generator 14 */
149	QE_BRG15, /* Baud Rate Generator 15 */
150	QE_BRG16, /* Baud Rate Generator 16 */
53677ef1 WD	151	QE_CLK1, /* Clock 1 */
	152	QE_CLK2, /* Clock 2 */
	153	QE_CLK3, /* Clock 3 */
	154	QE_CLK4, /* Clock 4 */
	155	QE_CLK5, /* Clock 5 */
	156	QE_CLK6, /* Clock 6 */
	157	QE_CLK7, /* Clock 7 */
	158	QE_CLK8, /* Clock 8 */
	159	QE_CLK9, /* Clock 9 */
	160	QE_CLK10, /* Clock 10 */
	161	QE_CLK11, /* Clock 11 */
	162	QE_CLK12, /* Clock 12 */
	163	QE_CLK13, /* Clock 13 */
	164	QE_CLK14, /* Clock 14 */
	165	QE_CLK15, /* Clock 15 */
	166	QE_CLK16, /* Clock 16 */
	167	QE_CLK17, /* Clock 17 */
	168	QE_CLK18, /* Clock 18 */
	169	QE_CLK19, /* Clock 19 */
	170	QE_CLK20, /* Clock 20 */
	171	QE_CLK21, /* Clock 21 */
	172	QE_CLK22, /* Clock 22 */
	173	QE_CLK23, /* Clock 23 */
	174	QE_CLK24, /* Clock 24 */
7737d5c6 DL	175	QE_CLK_DUMMY
	176	} qe_clock_e;
	177
	178	/* QE CMXGCR register
	179	*/
	180	#define QE_CMXGCR_MII_ENET_MNG_MASK 0x00007000
	181	#define QE_CMXGCR_MII_ENET_MNG_SHIFT 12
	182
	183	/* QE CMXUCR registers
	184	*/
	185	#define QE_CMXUCR_TX_CLK_SRC_MASK 0x0000000F
	186
	187	/* QE BRG configuration register
	188	*/
	189	#define QE_BRGC_ENABLE 0x00010000
	190	#define QE_BRGC_DIVISOR_SHIFT 1
	191	#define QE_BRGC_DIVISOR_MAX 0xFFF
	192	#define QE_BRGC_DIV16 1
	193
	194	/* QE SDMA registers
	195	*/
	196	#define QE_SDSR_BER1 0x02000000
	197	#define QE_SDSR_BER2 0x01000000
	198
	199	#define QE_SDMR_GLB_1_MSK 0x80000000
	200	#define QE_SDMR_ADR_SEL 0x20000000
	201	#define QE_SDMR_BER1_MSK 0x02000000
	202	#define QE_SDMR_BER2_MSK 0x01000000
	203	#define QE_SDMR_EB1_MSK 0x00800000
	204	#define QE_SDMR_ER1_MSK 0x00080000
	205	#define QE_SDMR_ER2_MSK 0x00040000
	206	#define QE_SDMR_CEN_MASK 0x0000E000
	207	#define QE_SDMR_SBER_1 0x00000200
	208	#define QE_SDMR_SBER_2 0x00000200
	209	#define QE_SDMR_EB1_PR_MASK 0x000000C0
	210	#define QE_SDMR_ER1_PR 0x00000008
	211
	212	#define QE_SDMR_CEN_SHIFT 13
	213	#define QE_SDMR_EB1_PR_SHIFT 6
	214
	215	#define QE_SDTM_MSNUM_SHIFT 24
	216
	217	#define QE_SDEBCR_BA_MASK 0x01FFFFFF
	218
b8ec2385 TT	219	/* Communication Processor */
	220	#define QE_CP_CERCR_MEE 0x8000 /* Multi-user RAM ECC enable */
	221	#define QE_CP_CERCR_IEE 0x4000 /* Instruction RAM ECC enable */
	222	#define QE_CP_CERCR_CIR 0x0800 /* Common instruction RAM */
	223
	224	/* I-RAM */
	225	#define QE_IRAM_IADD_AIE 0x80000000 /* Auto Increment Enable */
	226	#define QE_IRAM_IADD_BADDR 0x00080000 /* Base Address */
2d4de6ae	227	#define QE_IRAM_READY 0x80000000
b8ec2385 TT	228
	229	/* Structure that defines QE firmware binary files.
	230	*
d76485b9 HS	231	* See Documentation/powerpc/qe_firmware.rst in the Linux kernel tree for
d76485b9 HS	232	* a description of these fields.
b8ec2385 TT	233	*/
	234	struct qe_firmware {
	235	struct qe_header {
53677ef1 WD	236	u32 length; /* Length of the entire structure, in bytes */
	237	u8 magic[3]; /* Set to { 'Q', 'E', 'F' } */
	238	u8 version; /* Version of this layout. First ver is '1' */
b8ec2385	239	} header;
53677ef1 WD	240	u8 id[62]; /* Null-terminated identifier string */
	241	u8 split; /* 0 = shared I-RAM, 1 = split I-RAM */
	242	u8 count; /* Number of microcode[] structures */
b8ec2385	243	struct {
53677ef1 WD	244	u16 model; /* The SOC model */
	245	u8 major; /* The SOC revision major */
	246	u8 minor; /* The SOC revision minor */
b8ec2385	247	} __attribute__ ((packed)) soc;
53677ef1 WD	248	u8 padding[4]; /* Reserved, for alignment */
53677ef1 WD	249	u64 extended_modes; /* Extended modes */
b8ec2385	250	u32 vtraps[8]; /* Virtual trap addresses */
53677ef1	251	u8 reserved[4]; /* Reserved, for future expansion */
b8ec2385	252	struct qe_microcode {
53677ef1 WD	253	u8 id[32]; /* Null-terminated identifier */
	254	u32 traps[16]; /* Trap addresses, 0 == ignore */
	255	u32 eccr; /* The value for the ECCR register */
	256	u32 iram_offset;/* Offset into I-RAM for the code */
	257	u32 count; /* Number of 32-bit words of the code */
	258	u32 code_offset;/* Offset of the actual microcode */
	259	u8 major; /* The microcode version major */
	260	u8 minor; /* The microcode version minor */
	261	u8 revision; /* The microcode version revision */
	262	u8 padding; /* Reserved, for alignment */
	263	u8 reserved[4]; /* Reserved, for future expansion */
b8ec2385 TT	264	} __attribute__ ((packed)) microcode[1];
	265	/* All microcode binaries should be located here */
	266	/* CRC32 should be located here, after the microcode binaries */
	267	} __attribute__ ((packed));
	268
	269	struct qe_firmware_info {
	270	char id[64]; /* Firmware name */
	271	u32 vtraps[8]; /* Virtual trap addresses */
	272	u64 extended_modes; /* Extended modes */
	273	};
	274
7737d5c6 DL	275	void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign);
	276	void qe_issue_cmd(uint cmd, uint sbc, u8 mcn, u32 cmd_data);
	277	uint qe_muram_alloc(uint size, uint align);
	278	void *qe_muram_addr(uint offset);
	279	int qe_get_snum(void);
	280	void qe_put_snum(u8 snum);
	281	void qe_init(uint qe_base);
	282	void qe_reset(void);
	283	void qe_assign_page(uint snum, uint para_ram_base);
	284	int qe_set_brg(uint brg, uint rate);
	285	int qe_set_mii_clk_src(int ucc_num);
b8ec2385 TT	286	int qe_upload_firmware(const struct qe_firmware *firmware);
b8ec2385 TT	287	struct qe_firmware_info *qe_get_firmware_info(void);
69018ce2	288	void ft_qe_setup(void *blob);
2a44efeb ZQ	289	void qe_init(uint qe_base);
2a44efeb ZQ	290	void qe_reset(void);
7737d5c6	291
5632d15c ZQ	292	#ifdef CONFIG_U_QE
	293	void u_qe_init(void);
	294	int u_qe_upload_firmware(const struct qe_firmware *firmware);
ae42eb03 ZQ	295	void u_qe_resume(void);
	296	int u_qe_firmware_resume(const struct qe_firmware *firmware,
	297	qe_map_t *qe_immrr);
5632d15c ZQ	298	#endif
5632d15c ZQ	299
5990b059 HS	300	#if defined(CONFIG_PINCTRL)
	301	int par_io_of_config(struct udevice *dev);
	302	#endif
7737d5c6	303	#endif /* __QE_H__ */