[thirdparty/u-boot.git] / include / usb / ehci-fsl.h

/*
 * Copyright (c) 2005, 2009 Freescale Semiconductor, Inc
 * Copyright (c) 2005 MontaVista Software
 * Copyright (c) 2008 Excito Elektronik i Sk=E5ne AB
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef _EHCI_FSL_H
#define _EHCI_FSL_H

#include <asm/processor.h>

/* Global offsets */
#define FSL_SKIP_PCI		0x100

/* offsets for the non-ehci registers in the FSL SOC USB controller */
#define FSL_SOC_USB_ULPIVP	0x170
#define FSL_SOC_USB_PORTSC1	0x184
#define PORT_PTS_MSK		(3 << 30)
#define PORT_PTS_UTMI		(0 << 30)
#define PORT_PTS_ULPI		(2 << 30)
#define PORT_PTS_SERIAL		(3 << 30)
#define PORT_PTS_PTW		(1 << 28)
#define PORT_PFSC		(1 << 24) /* Defined on Page 39-44 of the mpc5151 ERM */
#define PORT_PTS_PHCD		(1 << 23)
#define PORT_PP			(1 << 12)
#define PORT_PR			(1 << 8)

/* USBMODE Register bits */
#define CM_IDLE			(0 << 0)
#define CM_RESERVED		(1 << 0)
#define CM_DEVICE		(2 << 0)
#define CM_HOST			(3 << 0)
#define ES_BE			(1 << 2)	/* Big Endian Select, default is LE */
#define USBMODE_RESERVED_2	(0 << 2)
#define SLOM			(1 << 3)
#define SDIS			(1 << 4)

/* CONTROL Register bits */
#define ULPI_INT_EN		(1 << 0)
#define WU_INT_EN		(1 << 1)
#define USB_EN			(1 << 2)
#define LSF_EN			(1 << 3)
#define KEEP_OTG_ON		(1 << 4)
#define OTG_PORT		(1 << 5)
#define REFSEL_12MHZ		(0 << 6)
#define REFSEL_16MHZ		(1 << 6)
#define REFSEL_48MHZ		(2 << 6)
#define PLL_RESET		(1 << 8)
#define UTMI_PHY_EN		(1 << 9)
#define PHY_CLK_SEL_UTMI	(0 << 10)
#define PHY_CLK_SEL_ULPI	(1 << 10)
#define CLKIN_SEL_USB_CLK	(0 << 11)
#define CLKIN_SEL_USB_CLK2	(1 << 11)
#define CLKIN_SEL_SYS_CLK	(2 << 11)
#define CLKIN_SEL_SYS_CLK2	(3 << 11)
#define RESERVED_18		(0 << 13)
#define RESERVED_17		(0 << 14)
#define RESERVED_16		(0 << 15)
#define WU_INT			(1 << 16)
#define PHY_CLK_VALID		(1 << 17)

#define FSL_SOC_USB_PORTSC2	0x188

/* OTG Status Control Register bits */
#define FSL_SOC_USB_OTGSC	0x1a4
#define CTRL_VBUS_DISCHARGE	(0x1<<0)
#define CTRL_VBUS_CHARGE	(0x1<<1)
#define CTRL_OTG_TERMINATION	(0x1<<3)
#define CTRL_DATA_PULSING	(0x1<<4)
#define CTRL_ID_PULL_EN		(0x1<<5)
#define HA_DATA_PULSE		(0x1<<6)
#define HA_BA			(0x1<<7)
#define STS_USB_ID		(0x1<<8)
#define STS_A_VBUS_VALID	(0x1<<9)
#define STS_A_SESSION_VALID	(0x1<<10)
#define STS_B_SESSION_VALID	(0x1<<11)
#define STS_B_SESSION_END	(0x1<<12)
#define STS_1MS_TOGGLE		(0x1<<13)
#define STS_DATA_PULSING	(0x1<<14)
#define INTSTS_USB_ID		(0x1<<16)
#define INTSTS_A_VBUS_VALID	(0x1<<17)
#define INTSTS_A_SESSION_VALID	(0x1<<18)
#define INTSTS_B_SESSION_VALID	(0x1<<19)
#define INTSTS_B_SESSION_END	(0x1<<20)
#define INTSTS_1MS		(0x1<<21)
#define INTSTS_DATA_PULSING	(0x1<<22)
#define INTR_USB_ID_EN		(0x1<<24)
#define INTR_A_VBUS_VALID_EN	(0x1<<25)
#define INTR_A_SESSION_VALID_EN (0x1<<26)
#define INTR_B_SESSION_VALID_EN (0x1<<27)
#define INTR_B_SESSION_END_EN	(0x1<<28)
#define INTR_1MS_TIMER_EN	(0x1<<29)
#define INTR_DATA_PULSING_EN	(0x1<<30)
#define INTSTS_MASK		(0x00ff0000)

/* USBCMD Bits of interest */
#define EHCI_FSL_USBCMD_RST	(1 <<  1)
#define EHCI_FSL_USBCMD_RS	(1 <<  0)

#define  INTERRUPT_ENABLE_BITS_MASK  \
		(INTR_USB_ID_EN		| \
		INTR_1MS_TIMER_EN	| \
		INTR_A_VBUS_VALID_EN	| \
		INTR_A_SESSION_VALID_EN | \
		INTR_B_SESSION_VALID_EN | \
		INTR_B_SESSION_END_EN	| \
		INTR_DATA_PULSING_EN)

#define  INTERRUPT_STATUS_BITS_MASK  \
		(INTSTS_USB_ID		| \
		INTR_1MS_TIMER_EN	| \
		INTSTS_A_VBUS_VALID	| \
		INTSTS_A_SESSION_VALID  | \
		INTSTS_B_SESSION_VALID  | \
		INTSTS_B_SESSION_END	| \
		INTSTS_DATA_PULSING)

#define FSL_SOC_USB_USBMODE	0x1a8

#define USBGENCTRL		0x200		/* NOTE: big endian */
#define GC_WU_INT_CLR		(1 << 5)	/* Wakeup int clear */
#define GC_ULPI_SEL		(1 << 4)	/* ULPI i/f select (usb0 only)*/
#define GC_PPP			(1 << 3)	/* Port Power Polarity */
#define GC_PFP			(1 << 2)	/* Power Fault Polarity */
#define GC_WU_ULPI_EN		(1 << 1)	/* Wakeup on ULPI event */
#define GC_WU_IE		(1 << 1)	/* Wakeup interrupt enable */

#define ISIPHYCTRL		0x204		/* NOTE: big endian */
#define PHYCTRL_PHYE		(1 << 4)	/* On-chip UTMI PHY enable */
#define PHYCTRL_BSENH		(1 << 3)	/* Bit Stuff Enable High */
#define PHYCTRL_BSEN		(1 << 2)	/* Bit Stuff Enable */
#define PHYCTRL_LSFE		(1 << 1)	/* Line State Filter Enable */
#define PHYCTRL_PXE		(1 << 0)	/* PHY oscillator enable */

#define FSL_SOC_USB_SNOOP1	0x400	/* NOTE: big-endian */
#define FSL_SOC_USB_SNOOP2	0x404	/* NOTE: big-endian */
#define FSL_SOC_USB_AGECNTTHRSH	0x408	/* NOTE: big-endian */
#define FSL_SOC_USB_PRICTRL	0x40c	/* NOTE: big-endian */
#define FSL_SOC_USB_SICTRL	0x410	/* NOTE: big-endian */
#define FSL_SOC_USB_CTRL	0x500	/* NOTE: big-endian */
#define SNOOP_SIZE_2GB		0x1e

/* System Clock Control Register */
#define MPC83XX_SCCR_USB_MASK		0x00f00000
#define MPC83XX_SCCR_USB_DRCM_11	0x00300000
#define MPC83XX_SCCR_USB_DRCM_01	0x00100000
#define MPC83XX_SCCR_USB_DRCM_10	0x00200000

#if defined(CONFIG_MPC83xx)
#define CONFIG_SYS_FSL_USB_ADDR CONFIG_SYS_MPC83xx_USB_ADDR
#elif defined(CONFIG_MPC85xx)
#define CONFIG_SYS_FSL_USB_ADDR CONFIG_SYS_MPC85xx_USB_ADDR
#elif defined(CONFIG_MPC512X)
#define CONFIG_SYS_FSL_USB_ADDR CONFIG_SYS_MPC512x_USB_ADDR
#endif

/*
 * USB Registers
 */
struct usb_ehci {
	u32	id;		/* 0x000 - Identification register */
	u32	hwgeneral;	/* 0x004 - General hardware parameters */
	u32	hwhost;		/* 0x008 - Host hardware parameters */
	u32	hwdevice;	/* 0x00C - Device hardware parameters  */
	u32	hwtxbuf;	/* 0x010 - TX buffer hardware parameters */
	u32	hwrxbuf;	/* 0x014 - RX buffer hardware parameters */
	u8	res1[0x68];
	u32	gptimer0_ld;	/* 0x080 - General Purpose Timer 0 load value */
	u32	gptimer0_ctrl;	/* 0x084 - General Purpose Timer 0 control */
	u32     gptimer1_ld;	/* 0x088 - General Purpose Timer 1 load value */
	u32     gptimer1_ctrl;	/* 0x08C - General Purpose Timer 1 control */
	u32	sbuscfg;	/* 0x090 - System Bus Interface Control */
	u8	res2[0x6C];
	u8	caplength;	/* 0x100 - Capability Register Length */
	u8	res3[0x1];
	u16	hciversion;	/* 0x102 - Host Interface Version */
	u32	hcsparams;	/* 0x104 - Host Structural Parameters */
	u32	hccparams;	/* 0x108 - Host Capability Parameters */
	u8	res4[0x14];
	u32	dciversion;	/* 0x120 - Device Interface Version */
	u32	dciparams;	/* 0x124 - Device Controller Params */
	u8	res5[0x18];
	u32	usbcmd;		/* 0x140 - USB Command */
	u32	usbsts;		/* 0x144 - USB Status */
	u32	usbintr;	/* 0x148 - USB Interrupt Enable */
	u32	frindex;	/* 0x14C - USB Frame Index */
	u8	res6[0x4];
	u32	perlistbase;	/* 0x154 - Periodic List Base
					 - USB Device Address */
	u32	ep_list_addr;	/* 0x158 - Next Asynchronous List
					 - End Point Address */
	u8	res7[0x4];
	u32	burstsize;	/* 0x160 - Programmable Burst Size */
#define FSL_EHCI_TXPBURST(X)	((X) << 8)
#define FSL_EHCI_RXPBURST(X)	(X)
	u32	txfilltuning;	/* 0x164 - Host TT Transmit
					   pre-buffer packet tuning */
	u8	res8[0x8];
	u32	ulpi_viewpoint;	/* 0x170 - ULPI Reister Access */
	u8	res9[0xc];
	u32	config_flag;	/* 0x180 - Configured Flag Register */
	u32	portsc;		/* 0x184 - Port status/control */
	u8	res10[0x1C];
	u32	otgsc;		/* 0x1a4 - Oo-The-Go status and control */
	u32	usbmode;	/* 0x1a8 - USB Device Mode */
	u32	epsetupstat;	/* 0x1ac - End Point Setup Status */
	u32	epprime;	/* 0x1b0 - End Point Init Status */
	u32	epflush;	/* 0x1b4 - End Point De-initlialize */
	u32	epstatus;	/* 0x1b8 - End Point Status */
	u32	epcomplete;	/* 0x1bc - End Point Complete */
	u32	epctrl0;	/* 0x1c0 - End Point Control 0 */
	u32	epctrl1;	/* 0x1c4 - End Point Control 1 */
	u32	epctrl2;	/* 0x1c8 - End Point Control 2 */
	u32	epctrl3;	/* 0x1cc - End Point Control 3 */
	u32	epctrl4;	/* 0x1d0 - End Point Control 4 */
	u32	epctrl5;	/* 0x1d4 - End Point Control 5 */
	u8	res11[0x28];
	u32	usbgenctrl;	/* 0x200 - USB General Control */
	u32	isiphyctrl;	/* 0x204 - On-Chip PHY Control */
	u8	res12[0x1F8];
	u32	snoop1;		/* 0x400 - Snoop 1 */
	u32	snoop2;		/* 0x404 - Snoop 2 */
	u32	age_cnt_limit;	/* 0x408 - Age Count Threshold */
	u32	prictrl;	/* 0x40c - Priority Control */
	u32	sictrl;		/* 0x410 - System Interface Control */
	u8	res13[0xEC];
	u32	control;	/* 0x500 - Control */
	u8	res14[0xafc];
};

/*
 * For MXC SOCs
 */

/* values for portsc field */
#define MXC_EHCI_PHY_LOW_POWER_SUSPEND	(1 << 23)
#define MXC_EHCI_FORCE_FS		(1 << 24)
#define MXC_EHCI_UTMI_8BIT		(0 << 28)
#define MXC_EHCI_UTMI_16BIT		(1 << 28)
#define MXC_EHCI_SERIAL			(1 << 29)
#define MXC_EHCI_MODE_UTMI		(0 << 30)
#define MXC_EHCI_MODE_PHILIPS		(1 << 30)
#define MXC_EHCI_MODE_ULPI		(2 << 30)
#define MXC_EHCI_MODE_SERIAL		(3 << 30)

/* values for flags field */
#define MXC_EHCI_INTERFACE_DIFF_UNI	(0 << 0)
#define MXC_EHCI_INTERFACE_DIFF_BI	(1 << 0)
#define MXC_EHCI_INTERFACE_SINGLE_UNI	(2 << 0)
#define MXC_EHCI_INTERFACE_SINGLE_BI	(3 << 0)
#define MXC_EHCI_INTERFACE_MASK		(0xf)

#define MXC_EHCI_POWER_PINS_ENABLED	(1 << 5)
#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH	(1 << 6)
#define MXC_EHCI_OC_PIN_ACTIVE_LOW	(1 << 7)
#define MXC_EHCI_TTL_ENABLED		(1 << 8)

#define MXC_EHCI_INTERNAL_PHY		(1 << 9)
#define MXC_EHCI_IPPUE_DOWN		(1 << 10)
#define MXC_EHCI_IPPUE_UP		(1 << 11)

/* Board-specific initialization */
int board_ehci_hcd_init(int port);

#endif /* _EHCI_FSL_H */
Commit	Line	Data
6b92487d	1	/*
4ef01010	2	* Copyright (c) 2005, 2009 Freescale Semiconductor, Inc
6b92487d MT	3	* Copyright (c) 2005 MontaVista Software
	4	* Copyright (c) 2008 Excito Elektronik i Sk=E5ne AB
	5	*
1a459660	6	* SPDX-License-Identifier: GPL-2.0+
6b92487d MT	7	*/
	8
	9	#ifndef _EHCI_FSL_H
	10	#define _EHCI_FSL_H
	11
4ef01010 VM	12	#include <asm/processor.h>
4ef01010 VM	13
6b92487d MT	14	/* Global offsets */
	15	#define FSL_SKIP_PCI 0x100
	16
	17	/* offsets for the non-ehci registers in the FSL SOC USB controller */
	18	#define FSL_SOC_USB_ULPIVP 0x170
	19	#define FSL_SOC_USB_PORTSC1 0x184
	20	#define PORT_PTS_MSK (3 << 30)
	21	#define PORT_PTS_UTMI (0 << 30)
	22	#define PORT_PTS_ULPI (2 << 30)
	23	#define PORT_PTS_SERIAL (3 << 30)
	24	#define PORT_PTS_PTW (1 << 28)
29c6fbe0 DD	25	#define PORT_PFSC (1 << 24) /* Defined on Page 39-44 of the mpc5151 ERM */
	26	#define PORT_PTS_PHCD (1 << 23)
	27	#define PORT_PP (1 << 12)
	28	#define PORT_PR (1 << 8)
6b92487d MT	29
	30	/* USBMODE Register bits */
	31	#define CM_IDLE (0 << 0)
	32	#define CM_RESERVED (1 << 0)
	33	#define CM_DEVICE (2 << 0)
	34	#define CM_HOST (3 << 0)
29c6fbe0	35	#define ES_BE (1 << 2) /* Big Endian Select, default is LE */
6b92487d MT	36	#define USBMODE_RESERVED_2 (0 << 2)
	37	#define SLOM (1 << 3)
	38	#define SDIS (1 << 4)
	39
	40	/* CONTROL Register bits */
	41	#define ULPI_INT_EN (1 << 0)
	42	#define WU_INT_EN (1 << 1)
	43	#define USB_EN (1 << 2)
	44	#define LSF_EN (1 << 3)
	45	#define KEEP_OTG_ON (1 << 4)
	46	#define OTG_PORT (1 << 5)
	47	#define REFSEL_12MHZ (0 << 6)
	48	#define REFSEL_16MHZ (1 << 6)
	49	#define REFSEL_48MHZ (2 << 6)
	50	#define PLL_RESET (1 << 8)
	51	#define UTMI_PHY_EN (1 << 9)
	52	#define PHY_CLK_SEL_UTMI (0 << 10)
	53	#define PHY_CLK_SEL_ULPI (1 << 10)
	54	#define CLKIN_SEL_USB_CLK (0 << 11)
	55	#define CLKIN_SEL_USB_CLK2 (1 << 11)
	56	#define CLKIN_SEL_SYS_CLK (2 << 11)
	57	#define CLKIN_SEL_SYS_CLK2 (3 << 11)
	58	#define RESERVED_18 (0 << 13)
	59	#define RESERVED_17 (0 << 14)
	60	#define RESERVED_16 (0 << 15)
	61	#define WU_INT (1 << 16)
	62	#define PHY_CLK_VALID (1 << 17)
	63
	64	#define FSL_SOC_USB_PORTSC2 0x188
29c6fbe0 DD	65
	66	/* OTG Status Control Register bits */
	67	#define FSL_SOC_USB_OTGSC 0x1a4
	68	#define CTRL_VBUS_DISCHARGE (0x1<<0)
	69	#define CTRL_VBUS_CHARGE (0x1<<1)
	70	#define CTRL_OTG_TERMINATION (0x1<<3)
	71	#define CTRL_DATA_PULSING (0x1<<4)
	72	#define CTRL_ID_PULL_EN (0x1<<5)
	73	#define HA_DATA_PULSE (0x1<<6)
	74	#define HA_BA (0x1<<7)
	75	#define STS_USB_ID (0x1<<8)
	76	#define STS_A_VBUS_VALID (0x1<<9)
	77	#define STS_A_SESSION_VALID (0x1<<10)
	78	#define STS_B_SESSION_VALID (0x1<<11)
	79	#define STS_B_SESSION_END (0x1<<12)
	80	#define STS_1MS_TOGGLE (0x1<<13)
	81	#define STS_DATA_PULSING (0x1<<14)
	82	#define INTSTS_USB_ID (0x1<<16)
	83	#define INTSTS_A_VBUS_VALID (0x1<<17)
	84	#define INTSTS_A_SESSION_VALID (0x1<<18)
	85	#define INTSTS_B_SESSION_VALID (0x1<<19)
	86	#define INTSTS_B_SESSION_END (0x1<<20)
	87	#define INTSTS_1MS (0x1<<21)
	88	#define INTSTS_DATA_PULSING (0x1<<22)
	89	#define INTR_USB_ID_EN (0x1<<24)
	90	#define INTR_A_VBUS_VALID_EN (0x1<<25)
	91	#define INTR_A_SESSION_VALID_EN (0x1<<26)
	92	#define INTR_B_SESSION_VALID_EN (0x1<<27)
	93	#define INTR_B_SESSION_END_EN (0x1<<28)
	94	#define INTR_1MS_TIMER_EN (0x1<<29)
	95	#define INTR_DATA_PULSING_EN (0x1<<30)
	96	#define INTSTS_MASK (0x00ff0000)
	97
	98	/* USBCMD Bits of interest */
	99	#define EHCI_FSL_USBCMD_RST (1 << 1)
	100	#define EHCI_FSL_USBCMD_RS (1 << 0)
	101
	102	#define INTERRUPT_ENABLE_BITS_MASK \
	103	(INTR_USB_ID_EN \| \
	104	INTR_1MS_TIMER_EN \| \
	105	INTR_A_VBUS_VALID_EN \| \
	106	INTR_A_SESSION_VALID_EN \| \
	107	INTR_B_SESSION_VALID_EN \| \
	108	INTR_B_SESSION_END_EN \| \
	109	INTR_DATA_PULSING_EN)
	110
	111	#define INTERRUPT_STATUS_BITS_MASK \
	112	(INTSTS_USB_ID \| \
	113	INTR_1MS_TIMER_EN \| \
	114	INTSTS_A_VBUS_VALID \| \
	115	INTSTS_A_SESSION_VALID \| \
	116	INTSTS_B_SESSION_VALID \| \
	117	INTSTS_B_SESSION_END \| \
	118	INTSTS_DATA_PULSING)
	119
6b92487d	120	#define FSL_SOC_USB_USBMODE 0x1a8
29c6fbe0 DD	121
	122	#define USBGENCTRL 0x200 /* NOTE: big endian */
	123	#define GC_WU_INT_CLR (1 << 5) /* Wakeup int clear */
	124	#define GC_ULPI_SEL (1 << 4) /* ULPI i/f select (usb0 only)*/
	125	#define GC_PPP (1 << 3) /* Port Power Polarity */
	126	#define GC_PFP (1 << 2) /* Power Fault Polarity */
	127	#define GC_WU_ULPI_EN (1 << 1) /* Wakeup on ULPI event */
	128	#define GC_WU_IE (1 << 1) /* Wakeup interrupt enable */
	129
	130	#define ISIPHYCTRL 0x204 /* NOTE: big endian */
	131	#define PHYCTRL_PHYE (1 << 4) /* On-chip UTMI PHY enable */
	132	#define PHYCTRL_BSENH (1 << 3) /* Bit Stuff Enable High */
	133	#define PHYCTRL_BSEN (1 << 2) /* Bit Stuff Enable */
	134	#define PHYCTRL_LSFE (1 << 1) /* Line State Filter Enable */
	135	#define PHYCTRL_PXE (1 << 0) /* PHY oscillator enable */
	136
6b92487d MT	137	#define FSL_SOC_USB_SNOOP1 0x400 /* NOTE: big-endian */
	138	#define FSL_SOC_USB_SNOOP2 0x404 /* NOTE: big-endian */
	139	#define FSL_SOC_USB_AGECNTTHRSH 0x408 /* NOTE: big-endian */
	140	#define FSL_SOC_USB_PRICTRL 0x40c /* NOTE: big-endian */
	141	#define FSL_SOC_USB_SICTRL 0x410 /* NOTE: big-endian */
	142	#define FSL_SOC_USB_CTRL 0x500 /* NOTE: big-endian */
	143	#define SNOOP_SIZE_2GB 0x1e
	144
	145	/* System Clock Control Register */
	146	#define MPC83XX_SCCR_USB_MASK 0x00f00000
	147	#define MPC83XX_SCCR_USB_DRCM_11 0x00300000
	148	#define MPC83XX_SCCR_USB_DRCM_01 0x00100000
	149	#define MPC83XX_SCCR_USB_DRCM_10 0x00200000
	150
fff6ec38	151	#if defined(CONFIG_MPC83xx)
29c6fbe0	152	#define CONFIG_SYS_FSL_USB_ADDR CONFIG_SYS_MPC83xx_USB_ADDR
a07bf180	153	#elif defined(CONFIG_MPC85xx)
29c6fbe0 DD	154	#define CONFIG_SYS_FSL_USB_ADDR CONFIG_SYS_MPC85xx_USB_ADDR
	155	#elif defined(CONFIG_MPC512X)
	156	#define CONFIG_SYS_FSL_USB_ADDR CONFIG_SYS_MPC512x_USB_ADDR
4ef01010 VM	157	#endif
	158
	159	/*
	160	* USB Registers
	161	*/
	162	struct usb_ehci {
29c6fbe0 DD	163	u32 id; /* 0x000 - Identification register */
	164	u32 hwgeneral; /* 0x004 - General hardware parameters */
	165	u32 hwhost; /* 0x008 - Host hardware parameters */
	166	u32 hwdevice; /* 0x00C - Device hardware parameters */
	167	u32 hwtxbuf; /* 0x010 - TX buffer hardware parameters */
	168	u32 hwrxbuf; /* 0x014 - RX buffer hardware parameters */
	169	u8 res1[0x68];
	170	u32 gptimer0_ld; /* 0x080 - General Purpose Timer 0 load value */
	171	u32 gptimer0_ctrl; /* 0x084 - General Purpose Timer 0 control */
	172	u32 gptimer1_ld; /* 0x088 - General Purpose Timer 1 load value */
	173	u32 gptimer1_ctrl; /* 0x08C - General Purpose Timer 1 control */
	174	u32 sbuscfg; /* 0x090 - System Bus Interface Control */
	175	u8 res2[0x6C];
0255f2d8 WG	176	u8 caplength; /* 0x100 - Capability Register Length */
0255f2d8 WG	177	u8 res3[0x1];
4ef01010 VM	178	u16 hciversion; /* 0x102 - Host Interface Version */
	179	u32 hcsparams; /* 0x104 - Host Structural Parameters */
	180	u32 hccparams; /* 0x108 - Host Capability Parameters */
0255f2d8	181	u8 res4[0x14];
4ef01010 VM	182	u32 dciversion; /* 0x120 - Device Interface Version */
4ef01010 VM	183	u32 dciparams; /* 0x124 - Device Controller Params */
0255f2d8	184	u8 res5[0x18];
4ef01010 VM	185	u32 usbcmd; /* 0x140 - USB Command */
	186	u32 usbsts; /* 0x144 - USB Status */
	187	u32 usbintr; /* 0x148 - USB Interrupt Enable */
	188	u32 frindex; /* 0x14C - USB Frame Index */
0255f2d8	189	u8 res6[0x4];
4ef01010 VM	190	u32 perlistbase; /* 0x154 - Periodic List Base
	191	- USB Device Address */
	192	u32 ep_list_addr; /* 0x158 - Next Asynchronous List
29c6fbe0	193	- End Point Address */
0255f2d8	194	u8 res7[0x4];
4ef01010	195	u32 burstsize; /* 0x160 - Programmable Burst Size */
29c6fbe0 DD	196	#define FSL_EHCI_TXPBURST(X) ((X) << 8)
29c6fbe0 DD	197	#define FSL_EHCI_RXPBURST(X) (X)
4ef01010 VM	198	u32 txfilltuning; /* 0x164 - Host TT Transmit
4ef01010 VM	199	pre-buffer packet tuning */
0255f2d8	200	u8 res8[0x8];
4ef01010	201	u32 ulpi_viewpoint; /* 0x170 - ULPI Reister Access */
0255f2d8	202	u8 res9[0xc];
4ef01010 VM	203	u32 config_flag; /* 0x180 - Configured Flag Register */
4ef01010 VM	204	u32 portsc; /* 0x184 - Port status/control */
0255f2d8	205	u8 res10[0x1C];
29c6fbe0	206	u32 otgsc; /* 0x1a4 - Oo-The-Go status and control */
4ef01010	207	u32 usbmode; /* 0x1a8 - USB Device Mode */
29c6fbe0 DD	208	u32 epsetupstat; /* 0x1ac - End Point Setup Status */
	209	u32 epprime; /* 0x1b0 - End Point Init Status */
	210	u32 epflush; /* 0x1b4 - End Point De-initlialize */
	211	u32 epstatus; /* 0x1b8 - End Point Status */
	212	u32 epcomplete; /* 0x1bc - End Point Complete */
	213	u32 epctrl0; /* 0x1c0 - End Point Control 0 */
	214	u32 epctrl1; /* 0x1c4 - End Point Control 1 */
	215	u32 epctrl2; /* 0x1c8 - End Point Control 2 */
	216	u32 epctrl3; /* 0x1cc - End Point Control 3 */
	217	u32 epctrl4; /* 0x1d0 - End Point Control 4 */
	218	u32 epctrl5; /* 0x1d4 - End Point Control 5 */
0255f2d8	219	u8 res11[0x28];
29c6fbe0 DD	220	u32 usbgenctrl; /* 0x200 - USB General Control */
29c6fbe0 DD	221	u32 isiphyctrl; /* 0x204 - On-Chip PHY Control */
0255f2d8	222	u8 res12[0x1F8];
4ef01010 VM	223	u32 snoop1; /* 0x400 - Snoop 1 */
	224	u32 snoop2; /* 0x404 - Snoop 2 */
	225	u32 age_cnt_limit; /* 0x408 - Age Count Threshold */
	226	u32 prictrl; /* 0x40c - Priority Control */
	227	u32 sictrl; /* 0x410 - System Interface Control */
0255f2d8	228	u8 res13[0xEC];
4ef01010	229	u32 control; /* 0x500 - Control */
0255f2d8	230	u8 res14[0xafc];
4ef01010 VM	231	};
4ef01010 VM	232
1ca56202 WG	233	/*
	234	* For MXC SOCs
	235	*/
8eeb19be BT	236
	237	/* values for portsc field */
	238	#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23)
	239	#define MXC_EHCI_FORCE_FS (1 << 24)
	240	#define MXC_EHCI_UTMI_8BIT (0 << 28)
	241	#define MXC_EHCI_UTMI_16BIT (1 << 28)
	242	#define MXC_EHCI_SERIAL (1 << 29)
	243	#define MXC_EHCI_MODE_UTMI (0 << 30)
	244	#define MXC_EHCI_MODE_PHILIPS (1 << 30)
	245	#define MXC_EHCI_MODE_ULPI (2 << 30)
	246	#define MXC_EHCI_MODE_SERIAL (3 << 30)
	247
	248	/* values for flags field */
	249	#define MXC_EHCI_INTERFACE_DIFF_UNI (0 << 0)
	250	#define MXC_EHCI_INTERFACE_DIFF_BI (1 << 0)
	251	#define MXC_EHCI_INTERFACE_SINGLE_UNI (2 << 0)
	252	#define MXC_EHCI_INTERFACE_SINGLE_BI (3 << 0)
	253	#define MXC_EHCI_INTERFACE_MASK (0xf)
	254
1ca56202	255	#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5)
31ac2d0c BT	256	#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH (1 << 6)
	257	#define MXC_EHCI_OC_PIN_ACTIVE_LOW (1 << 7)
	258	#define MXC_EHCI_TTL_ENABLED (1 << 8)
8eeb19be	259
31ac2d0c BT	260	#define MXC_EHCI_INTERNAL_PHY (1 << 9)
	261	#define MXC_EHCI_IPPUE_DOWN (1 << 10)
	262	#define MXC_EHCI_IPPUE_UP (1 << 11)
1ca56202 WG	263
	264	/* Board-specific initialization */
	265	int board_ehci_hcd_init(int port);
	266
6b92487d	267	#endif /* _EHCI_FSL_H */