projects / thirdparty / u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| 53633a89 TR |
1 | // SPDX-License-Identifier: GPL-2.0-or-later |
| 2 | /* | |
| 3 | * Copyright 2012 Markus Pargmann, Pengutronix | |
| 4 | */ | |
| 5 | ||
| 6 | #include "imx27-phytec-phycard-s-som.dtsi" | |
| 7 | ||
| 8 | / { | |
| 9 | model = "Phytec pca100 rapid development kit"; | |
| 10 | compatible = "phytec,imx27-pca100-rdk", "phytec,imx27-pca100", "fsl,imx27"; | |
| 11 | ||
| 12 | chosen { | |
| 13 | stdout-path = &uart1; | |
| 14 | }; | |
| 15 | ||
| 16 | display: display { | |
| 17 | model = "Primeview-PD050VL1"; | |
| 18 | bits-per-pixel = <16>; /* non-standard but required */ | |
| 19 | fsl,pcr = <0xf0c88080>; /* non-standard but required */ | |
| 20 | display-timings { | |
| 21 | native-mode = <&timing0>; | |
| 93743d24 | 22 | timing0: timing0 { |
| 53633a89 TR |
23 | hactive = <640>; |
| 24 | vactive = <480>; | |
| 25 | hback-porch = <112>; | |
| 26 | hfront-porch = <36>; | |
| 27 | hsync-len = <32>; | |
| 28 | vback-porch = <33>; | |
| 29 | vfront-porch = <33>; | |
| 30 | vsync-len = <2>; | |
| 31 | clock-frequency = <25000000>; | |
| 32 | }; | |
| 33 | }; | |
| 34 | }; | |
| 35 | ||
| 36 | reg_3v3: regulator-0 { | |
| 37 | compatible = "regulator-fixed"; | |
| 38 | regulator-name = "3V3"; | |
| 39 | regulator-min-microvolt = <3300000>; | |
| 40 | regulator-max-microvolt = <3300000>; | |
| 41 | regulator-always-on; | |
| 42 | }; | |
| 43 | }; | |
| 44 | ||
| 45 | &fb { | |
| 46 | display = <&display>; | |
| 47 | status = "okay"; | |
| 48 | }; | |
| 49 | ||
| 50 | &i2c1 { | |
| 51 | pinctrl-names = "default"; | |
| 52 | pinctrl-0 = <&pinctrl_i2c1>; | |
| 53 | status = "okay"; | |
| 54 | ||
| 55 | rtc@51 { | |
| 56 | compatible = "nxp,pcf8563"; | |
| 57 | reg = <0x51>; | |
| 58 | }; | |
| 59 | ||
| 60 | adc@64 { | |
| 61 | compatible = "maxim,max1037"; | |
| 62 | vcc-supply = <®_3v3>; | |
| 63 | reg = <0x64>; | |
| 64 | }; | |
| 65 | }; | |
| 66 | ||
| 67 | &iomuxc { | |
| 68 | imx27-phycard-s-rdk { | |
| 69 | pinctrl_i2c1: i2c1grp { | |
| 70 | fsl,pins = < | |
| 71 | MX27_PAD_I2C_DATA__I2C_DATA 0x0 | |
| 72 | MX27_PAD_I2C_CLK__I2C_CLK 0x0 | |
| 73 | >; | |
| 74 | }; | |
| 75 | ||
| 76 | pinctrl_owire1: owire1grp { | |
| 77 | fsl,pins = < | |
| 78 | MX27_PAD_RTCK__OWIRE 0x0 | |
| 79 | >; | |
| 80 | }; | |
| 81 | ||
| 82 | pinctrl_sdhc2: sdhc2grp { | |
| 83 | fsl,pins = < | |
| 84 | MX27_PAD_SD2_CLK__SD2_CLK 0x0 | |
| 85 | MX27_PAD_SD2_CMD__SD2_CMD 0x0 | |
| 86 | MX27_PAD_SD2_D0__SD2_D0 0x0 | |
| 87 | MX27_PAD_SD2_D1__SD2_D1 0x0 | |
| 88 | MX27_PAD_SD2_D2__SD2_D2 0x0 | |
| 89 | MX27_PAD_SD2_D3__SD2_D3 0x0 | |
| 90 | MX27_PAD_SSI3_RXDAT__GPIO3_29 0x0 /* CD */ | |
| 91 | >; | |
| 92 | }; | |
| 93 | ||
| 94 | pinctrl_uart1: uart1grp { | |
| 95 | fsl,pins = < | |
| 96 | MX27_PAD_UART1_TXD__UART1_TXD 0x0 | |
| 97 | MX27_PAD_UART1_RXD__UART1_RXD 0x0 | |
| 98 | MX27_PAD_UART1_CTS__UART1_CTS 0x0 | |
| 99 | MX27_PAD_UART1_RTS__UART1_RTS 0x0 | |
| 100 | >; | |
| 101 | }; | |
| 102 | ||
| 103 | pinctrl_uart2: uart2grp { | |
| 104 | fsl,pins = < | |
| 105 | MX27_PAD_UART2_TXD__UART2_TXD 0x0 | |
| 106 | MX27_PAD_UART2_RXD__UART2_RXD 0x0 | |
| 107 | MX27_PAD_UART2_CTS__UART2_CTS 0x0 | |
| 108 | MX27_PAD_UART2_RTS__UART2_RTS 0x0 | |
| 109 | >; | |
| 110 | }; | |
| 111 | ||
| 112 | pinctrl_uart3: uart3grp { | |
| 113 | fsl,pins = < | |
| 114 | MX27_PAD_UART3_TXD__UART3_TXD 0x0 | |
| 115 | MX27_PAD_UART3_RXD__UART3_RXD 0x0 | |
| 116 | MX27_PAD_UART3_CTS__UART3_CTS 0x0 | |
| 117 | MX27_PAD_UART3_RTS__UART3_RTS 0x0 | |
| 118 | >; | |
| 119 | }; | |
| 120 | }; | |
| 121 | }; | |
| 122 | ||
| 123 | &owire { | |
| 124 | pinctrl-names = "default"; | |
| 125 | pinctrl-0 = <&pinctrl_owire1>; | |
| 126 | status = "okay"; | |
| 127 | }; | |
| 128 | ||
| 129 | &sdhci2 { | |
| 130 | pinctrl-names = "default"; | |
| 131 | pinctrl-0 = <&pinctrl_sdhc2>; | |
| 132 | cd-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; | |
| 133 | status = "okay"; | |
| 134 | }; | |
| 135 | ||
| 136 | &uart1 { | |
| 137 | uart-has-rtscts; | |
| 138 | pinctrl-names = "default"; | |
| 139 | pinctrl-0 = <&pinctrl_uart1>; | |
| 140 | status = "okay"; | |
| 141 | }; | |
| 142 | ||
| 143 | &uart2 { | |
| 144 | uart-has-rtscts; | |
| 145 | pinctrl-names = "default"; | |
| 146 | pinctrl-0 = <&pinctrl_uart2>; | |
| 147 | status = "okay"; | |
| 148 | }; | |
| 149 | ||
| 150 | &uart3 { | |
| 151 | uart-has-rtscts; | |
| 152 | pinctrl-names = "default"; | |
| 153 | pinctrl-0 = <&pinctrl_uart3>; | |
| 154 | status = "okay"; | |
| 155 | }; |