]>
Commit | Line | Data |
---|---|---|
53633a89 TR |
1 | // SPDX-License-Identifier: BSD-3-Clause |
2 | /* | |
3 | * Copyright (c) 2022, Luca Weiss <luca@z3ntu.xyz> | |
4 | */ | |
5 | ||
6 | /dts-v1/; | |
7 | ||
8 | #include "qcom-msm8226.dtsi" | |
93743d24 | 9 | #include "pm8226.dtsi" |
53633a89 TR |
10 | #include <dt-bindings/input/ti-drv260x.h> |
11 | ||
12 | /delete-node/ &adsp_region; | |
13 | ||
14 | / { | |
15 | model = "Huawei Watch"; | |
16 | compatible = "huawei,sturgeon", "qcom,apq8026"; | |
17 | chassis-type = "watch"; | |
18 | qcom,msm-id = <199 0x20000>; | |
19 | qcom,board-id = <8 4>; | |
20 | ||
21 | reserved-memory { | |
22 | sbl_region: sbl@2f00000 { | |
23 | reg = <0x02f00000 0x100000>; | |
24 | no-map; | |
25 | }; | |
26 | ||
27 | external_image_region: external-image@3100000 { | |
28 | reg = <0x3100000 0x200000>; | |
29 | no-map; | |
30 | }; | |
31 | ||
32 | peripheral_region: peripheral@3300000 { | |
33 | reg = <0x3300000 0x600000>; | |
34 | no-map; | |
35 | }; | |
36 | ||
37 | adsp_region: adsp@3900000 { | |
38 | reg = <0x3900000 0x1400000>; | |
39 | no-map; | |
40 | }; | |
41 | ||
42 | modem_region: modem@4d00000 { | |
43 | reg = <0x4d00000 0x1b00000>; | |
44 | no-map; | |
45 | }; | |
46 | ||
47 | modem_efs_region: modem-efs@7f00000 { | |
48 | reg = <0x7f00000 0x100000>; | |
49 | no-map; | |
50 | }; | |
51 | }; | |
52 | ||
53 | vreg_wlan: wlan-regulator { | |
54 | compatible = "regulator-fixed"; | |
55 | ||
56 | regulator-name = "wl-reg"; | |
57 | regulator-min-microvolt = <2950000>; | |
58 | regulator-max-microvolt = <2950000>; | |
59 | ||
60 | gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>; | |
61 | enable-active-high; | |
62 | ||
63 | pinctrl-names = "default"; | |
64 | pinctrl-0 = <&wlan_regulator_default_state>; | |
65 | }; | |
66 | }; | |
67 | ||
68 | &adsp { | |
69 | status = "okay"; | |
70 | }; | |
71 | ||
72 | &blsp1_i2c2 { | |
73 | clock-frequency = <384000>; | |
74 | ||
75 | status = "okay"; | |
76 | ||
77 | vibrator@5a { | |
78 | compatible = "ti,drv2605"; | |
79 | reg = <0x5a>; | |
80 | enable-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>; | |
81 | ||
82 | mode = <DRV260X_ERM_MODE>; | |
83 | library-sel = <DRV260X_ERM_LIB_D>; | |
84 | vib-rated-mv = <2765>; | |
85 | vib-overdrive-mv = <3525>; | |
86 | ||
87 | pinctrl-0 = <&vibrator_default_state>; | |
88 | pinctrl-names = "default"; | |
89 | }; | |
90 | }; | |
91 | ||
92 | &blsp1_i2c5 { | |
93 | clock-frequency = <384000>; | |
94 | ||
95 | status = "okay"; | |
96 | ||
97 | touchscreen@20 { | |
98 | compatible = "syna,rmi4-i2c"; | |
99 | reg = <0x20>; | |
100 | ||
101 | interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>; | |
102 | vdd-supply = <&pm8226_l19>; | |
103 | vio-supply = <&pm8226_lvs1>; | |
104 | ||
105 | pinctrl-names = "default"; | |
106 | pinctrl-0 = <&touch_default_state>; | |
107 | ||
108 | syna,startup-delay-ms = <160>; | |
109 | ||
110 | #address-cells = <1>; | |
111 | #size-cells = <0>; | |
112 | ||
113 | rmi4-f01@1 { | |
114 | reg = <0x1>; | |
115 | syna,nosleep-mode = <1>; | |
116 | }; | |
117 | ||
118 | rmi4-f12@12 { | |
119 | reg = <0x12>; | |
120 | syna,sensor-type = <1>; | |
121 | }; | |
122 | }; | |
123 | }; | |
124 | ||
125 | &blsp1_uart4 { | |
126 | pinctrl-names = "default"; | |
127 | pinctrl-0 = <&blsp1_uart4_default_state>; | |
128 | ||
129 | status = "okay"; | |
130 | ||
131 | bluetooth { | |
132 | compatible = "brcm,bcm43430a0-bt"; | |
133 | max-speed = <3000000>; | |
134 | ||
135 | pinctrl-names = "default"; | |
136 | pinctrl-0 = <&bluetooth_default_state>; | |
137 | ||
138 | host-wakeup-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; | |
139 | device-wakeup-gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>; | |
140 | shutdown-gpios = <&tlmm 67 GPIO_ACTIVE_HIGH>; | |
141 | }; | |
142 | }; | |
143 | ||
144 | &rpm_requests { | |
145 | regulators { | |
146 | compatible = "qcom,rpm-pm8226-regulators"; | |
147 | ||
148 | pm8226_s3: s3 { | |
149 | regulator-min-microvolt = <1200000>; | |
150 | regulator-max-microvolt = <1300000>; | |
151 | }; | |
152 | ||
153 | pm8226_s4: s4 { | |
154 | regulator-min-microvolt = <1800000>; | |
155 | regulator-max-microvolt = <2200000>; | |
156 | }; | |
157 | ||
158 | pm8226_s5: s5 { | |
159 | regulator-min-microvolt = <1150000>; | |
160 | regulator-max-microvolt = <1150000>; | |
161 | }; | |
162 | ||
163 | pm8226_l1: l1 { | |
164 | regulator-min-microvolt = <1225000>; | |
165 | regulator-max-microvolt = <1225000>; | |
166 | }; | |
167 | ||
168 | pm8226_l2: l2 { | |
169 | regulator-min-microvolt = <1200000>; | |
170 | regulator-max-microvolt = <1200000>; | |
171 | }; | |
172 | ||
173 | pm8226_l3: l3 { | |
174 | regulator-min-microvolt = <750000>; | |
175 | regulator-max-microvolt = <1337500>; | |
176 | }; | |
177 | ||
178 | pm8226_l4: l4 { | |
179 | regulator-min-microvolt = <1200000>; | |
180 | regulator-max-microvolt = <1200000>; | |
181 | }; | |
182 | ||
183 | pm8226_l5: l5 { | |
184 | regulator-min-microvolt = <1200000>; | |
185 | regulator-max-microvolt = <1200000>; | |
186 | }; | |
187 | ||
188 | pm8226_l6: l6 { | |
189 | regulator-min-microvolt = <1800000>; | |
190 | regulator-max-microvolt = <1800000>; | |
191 | }; | |
192 | ||
193 | pm8226_l7: l7 { | |
194 | regulator-min-microvolt = <1850000>; | |
195 | regulator-max-microvolt = <1850000>; | |
196 | }; | |
197 | ||
198 | pm8226_l8: l8 { | |
199 | regulator-min-microvolt = <1800000>; | |
200 | regulator-max-microvolt = <1800000>; | |
201 | }; | |
202 | ||
203 | pm8226_l9: l9 { | |
204 | regulator-min-microvolt = <2050000>; | |
205 | regulator-max-microvolt = <2050000>; | |
206 | }; | |
207 | ||
208 | pm8226_l10: l10 { | |
209 | regulator-min-microvolt = <1800000>; | |
210 | regulator-max-microvolt = <1800000>; | |
211 | }; | |
212 | ||
213 | pm8226_l12: l12 { | |
214 | regulator-min-microvolt = <1800000>; | |
215 | regulator-max-microvolt = <1800000>; | |
216 | }; | |
217 | ||
218 | pm8226_l14: l14 { | |
219 | regulator-min-microvolt = <2750000>; | |
220 | regulator-max-microvolt = <2750000>; | |
221 | }; | |
222 | ||
223 | pm8226_l15: l15 { | |
224 | regulator-min-microvolt = <2800000>; | |
225 | regulator-max-microvolt = <2800000>; | |
226 | }; | |
227 | ||
228 | pm8226_l16: l16 { | |
229 | regulator-min-microvolt = <3000000>; | |
230 | regulator-max-microvolt = <3350000>; | |
231 | }; | |
232 | ||
233 | pm8226_l17: l17 { | |
234 | regulator-min-microvolt = <2950000>; | |
235 | regulator-max-microvolt = <2950000>; | |
236 | }; | |
237 | ||
238 | pm8226_l18: l18 { | |
239 | regulator-min-microvolt = <2950000>; | |
240 | regulator-max-microvolt = <2950000>; | |
241 | }; | |
242 | ||
243 | pm8226_l19: l19 { | |
244 | regulator-min-microvolt = <2850000>; | |
245 | regulator-max-microvolt = <2850000>; | |
246 | }; | |
247 | ||
248 | pm8226_l20: l20 { | |
249 | regulator-min-microvolt = <3075000>; | |
250 | regulator-max-microvolt = <3075000>; | |
251 | }; | |
252 | ||
253 | pm8226_l21: l21 { | |
254 | regulator-min-microvolt = <1800000>; | |
255 | regulator-max-microvolt = <2950000>; | |
256 | }; | |
257 | ||
258 | pm8226_l22: l22 { | |
259 | regulator-min-microvolt = <1800000>; | |
260 | regulator-max-microvolt = <2950000>; | |
261 | }; | |
262 | ||
263 | pm8226_l23: l23 { | |
264 | regulator-min-microvolt = <1800000>; | |
265 | regulator-max-microvolt = <2950000>; | |
266 | }; | |
267 | ||
268 | pm8226_l24: l24 { | |
269 | regulator-min-microvolt = <1300000>; | |
270 | regulator-max-microvolt = <1350000>; | |
271 | }; | |
272 | ||
273 | pm8226_l25: l25 { | |
274 | regulator-min-microvolt = <1775000>; | |
275 | regulator-max-microvolt = <2125000>; | |
276 | }; | |
277 | ||
278 | pm8226_l26: l26 { | |
279 | regulator-min-microvolt = <1225000>; | |
280 | regulator-max-microvolt = <1225000>; | |
281 | }; | |
282 | ||
283 | pm8226_l27: l27 { | |
284 | regulator-min-microvolt = <2050000>; | |
285 | regulator-max-microvolt = <2050000>; | |
286 | }; | |
287 | ||
288 | pm8226_l28: l28 { | |
289 | regulator-min-microvolt = <1800000>; | |
290 | regulator-max-microvolt = <2950000>; | |
291 | }; | |
292 | ||
293 | pm8226_lvs1: lvs1 {}; | |
294 | }; | |
295 | }; | |
296 | ||
297 | &sdhc_1 { | |
298 | vmmc-supply = <&pm8226_l17>; | |
299 | vqmmc-supply = <&pm8226_l6>; | |
300 | ||
301 | bus-width = <8>; | |
302 | non-removable; | |
303 | ||
304 | status = "okay"; | |
305 | }; | |
306 | ||
307 | &sdhc_3 { | |
308 | max-frequency = <100000000>; | |
309 | non-removable; | |
310 | ||
311 | vmmc-supply = <&vreg_wlan>; | |
312 | vqmmc-supply = <&pm8226_l6>; | |
313 | ||
314 | #address-cells = <1>; | |
315 | #size-cells = <0>; | |
316 | ||
317 | status = "okay"; | |
318 | ||
319 | wifi@1 { | |
320 | compatible = "brcm,bcm43430a0-fmac", "brcm,bcm4329-fmac"; | |
321 | reg = <1>; | |
322 | ||
323 | interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_FALLING>; | |
324 | interrupt-names = "host-wake"; | |
325 | ||
326 | pinctrl-names = "default"; | |
327 | pinctrl-0 = <&wlan_hostwake_default_state>; | |
328 | }; | |
329 | }; | |
330 | ||
331 | &smbb { | |
332 | qcom,fast-charge-safe-voltage = <4370000>; | |
333 | qcom,fast-charge-high-threshold-voltage = <4350000>; | |
334 | qcom,minimum-input-voltage = <4350000>; | |
335 | qcom,fast-charge-current-limit = <300000>; | |
336 | qcom,fast-charge-safe-current = <600000>; | |
337 | qcom,auto-recharge-threshold-voltage = <4240000>; | |
93743d24 TR |
338 | |
339 | status = "okay"; | |
53633a89 TR |
340 | }; |
341 | ||
342 | &tlmm { | |
343 | blsp1_uart4_default_state: blsp1-uart4-default-state { | |
344 | pins = "gpio12", "gpio13", "gpio14", "gpio15"; | |
345 | function = "blsp_uart4"; | |
346 | drive-strength = <8>; | |
347 | bias-disable; | |
348 | }; | |
349 | ||
350 | bluetooth_default_state: bluetooth-default-state { | |
351 | pins = "gpio63", "gpio64"; | |
352 | function = "gpio"; | |
353 | drive-strength = <2>; | |
354 | bias-pull-down; | |
355 | }; | |
356 | ||
357 | touch_default_state: touch-default-state { | |
358 | irq-pins { | |
359 | pins = "gpio17"; | |
360 | function = "gpio"; | |
361 | drive-strength = <8>; | |
362 | bias-pull-up; | |
363 | }; | |
364 | ||
365 | reset-pins { | |
366 | pins = "gpio16"; | |
367 | function = "gpio"; | |
368 | drive-strength = <6>; | |
369 | bias-pull-up; | |
370 | }; | |
371 | }; | |
372 | ||
373 | vibrator_default_state: vibrator-default-state { | |
374 | pins = "gpio59", "gpio60"; | |
375 | function = "gpio"; | |
376 | drive-strength = <2>; | |
377 | bias-pull-down; | |
378 | }; | |
379 | ||
380 | wlan_hostwake_default_state: wlan-hostwake-default-state { | |
381 | pins = "gpio66"; | |
382 | function = "gpio"; | |
383 | drive-strength = <2>; | |
384 | bias-disable; | |
385 | }; | |
386 | ||
387 | wlan_regulator_default_state: wlan-regulator-default-state { | |
388 | pins = "gpio110"; | |
389 | function = "gpio"; | |
390 | drive-strength = <2>; | |
391 | bias-pull-down; | |
392 | }; | |
393 | }; | |
394 | ||
395 | &usb { | |
396 | extcon = <&smbb>; | |
397 | dr_mode = "peripheral"; | |
398 | status = "okay"; | |
399 | }; | |
400 | ||
401 | &usb_hs_phy { | |
402 | extcon = <&smbb>; | |
403 | v1p8-supply = <&pm8226_l10>; | |
404 | v3p3-supply = <&pm8226_l20>; | |
405 | }; |