[thirdparty/u-boot.git] / src / arm / renesas / r8a7791-porter.dts

// SPDX-License-Identifier: GPL-2.0
/*
 * Device Tree Source for the Porter board
 *
 * Copyright (C) 2015 Cogent Embedded, Inc.
 */

/*
 * SSI-AK4642
 *
 * JP3: 2-1: AK4642
 *      2-3: ADV7511
 *
 * This command is required before playback/capture:
 *
 *	amixer set "LINEOUT Mixer DACL" on
 */

/dts-v1/;
#include "r8a7791.dtsi"
#include <dt-bindings/gpio/gpio.h>

/ {
	model = "Porter";
	compatible = "renesas,porter", "renesas,r8a7791";

	aliases {
		serial0 = &scif0;
		i2c9 = &gpioi2c2;
		i2c10 = &i2chdmi;
		mmc0 = &sdhi0;
		mmc1 = &sdhi2;
	};

	chosen {
		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
		stdout-path = "serial0:115200n8";
	};

	memory@40000000 {
		device_type = "memory";
		reg = <0 0x40000000 0 0x40000000>;
	};

	memory@200000000 {
		device_type = "memory";
		reg = <2 0x00000000 0 0x40000000>;
	};

	reg_1p8v: regulator-1v8 {
		compatible = "regulator-fixed";
		regulator-name = "fixed-1.8V";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		regulator-boot-on;
		regulator-always-on;
	};

	reg_3p3v: regulator-3v3 {
		compatible = "regulator-fixed";
		regulator-name = "fixed-3.3V";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-boot-on;
		regulator-always-on;
	};

	vcc_sdhi0: regulator-vcc-sdhi0 {
		compatible = "regulator-fixed";

		regulator-name = "SDHI0 Vcc";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-always-on;
	};

	vccq_sdhi0: regulator-vccq-sdhi0 {
		compatible = "regulator-gpio";

		regulator-name = "SDHI0 VccQ";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <3300000>;

		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
		gpios-states = <1>;
		states = <3300000 1>, <1800000 0>;
	};

	vcc_sdhi2: regulator-vcc-sdhi2 {
		compatible = "regulator-fixed";

		regulator-name = "SDHI2 Vcc";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-always-on;
	};

	vccq_sdhi2: regulator-vccq-sdhi2 {
		compatible = "regulator-gpio";

		regulator-name = "SDHI2 VccQ";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <3300000>;

		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
		gpios-states = <1>;
		states = <3300000 1>, <1800000 0>;
	};

	hdmi-out {
		compatible = "hdmi-connector";
		type = "a";

		port {
			hdmi_con: endpoint {
				remote-endpoint = <&adv7511_out>;
			};
		};
	};

	x3_clk: x3-clock {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <148500000>;
	};

	x16_clk: x16-clock {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <74250000>;
	};

	x14_clk: audio_clock {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <11289600>;
	};

	sound {
		compatible = "simple-audio-card";

		simple-audio-card,format = "left_j";
		simple-audio-card,bitclock-master = <&soundcodec>;
		simple-audio-card,frame-master = <&soundcodec>;

		simple-audio-card,cpu {
			sound-dai = <&rcar_sound>;
		};

		soundcodec: simple-audio-card,codec {
			sound-dai = <&ak4642>;
			clocks = <&x14_clk>;
		};
	};

	gpioi2c2: i2c-9 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "i2c-gpio";
		status = "disabled";
		scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
		sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
		i2c-gpio,delay-us = <5>;
	};

	/*
	 * A fallback to GPIO is provided for I2C2.
	 */
	i2chdmi: i2c-mux1 {
		compatible = "i2c-demux-pinctrl";
		i2c-parent = <&i2c2>, <&gpioi2c2>;
		i2c-bus-name = "i2c-hdmi";
		#address-cells = <1>;
		#size-cells = <0>;

		ak4642: codec@12 {
			compatible = "asahi-kasei,ak4642";
			#sound-dai-cells = <0>;
			reg = <0x12>;
		};

		composite-in@20 {
			compatible = "adi,adv7180";
			reg = <0x20>;

			port {
				adv7180: endpoint {
					bus-width = <8>;
					remote-endpoint = <&vin0ep>;
				};
			};
		};

		hdmi@39 {
			compatible = "adi,adv7511w";
			reg = <0x39>;
			interrupt-parent = <&gpio3>;
			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;

			avdd-supply = <&reg_1p8v>;
			dvdd-supply = <&reg_1p8v>;
			pvdd-supply = <&reg_1p8v>;
			dvdd-3v-supply = <&reg_3p3v>;
			bgvdd-supply = <&reg_1p8v>;

			adi,input-depth = <8>;
			adi,input-colorspace = "rgb";
			adi,input-clock = "1x";

			ports {
				#address-cells = <1>;
				#size-cells = <0>;

				port@0 {
					reg = <0>;
					adv7511_in: endpoint {
						remote-endpoint = <&du_out_rgb>;
					};
				};

				port@1 {
					reg = <1>;
					adv7511_out: endpoint {
						remote-endpoint = <&hdmi_con>;
					};
				};
			};
		};
	};
};

&extal_clk {
	clock-frequency = <20000000>;
};

&pfc {
	scif0_pins: scif0 {
		groups = "scif0_data_d";
		function = "scif0";
	};

	ether_pins: ether {
		groups = "eth_link", "eth_mdio", "eth_rmii";
		function = "eth";
	};

	phy1_pins: phy1 {
		groups = "intc_irq0";
		function = "intc";
	};

	pmic_irq_pins: pmicirq {
		groups = "intc_irq2";
		function = "intc";
	};

	sdhi0_pins: sd0 {
		groups = "sdhi0_data4", "sdhi0_ctrl";
		function = "sdhi0";
	};

	sdhi2_pins: sd2 {
		groups = "sdhi2_data4", "sdhi2_ctrl";
		function = "sdhi2";
	};

	qspi_pins: qspi {
		groups = "qspi_ctrl", "qspi_data4";
		function = "qspi";
	};

	i2c2_pins: i2c2 {
		groups = "i2c2";
		function = "i2c2";
	};

	usb0_pins: usb0 {
		groups = "usb0";
		function = "usb0";
	};

	usb1_pins: usb1 {
		groups = "usb1";
		function = "usb1";
	};

	vin0_pins: vin0 {
		groups = "vin0_data8", "vin0_clk";
		function = "vin0";
	};

	can0_pins: can0 {
		groups = "can0_data";
		function = "can0";
	};

	du_pins: du {
		groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
		function = "du";
	};

	ssi_pins: sound {
		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
		function = "ssi";
	};

	audio_clk_pins: audio_clk {
		groups = "audio_clk_a";
		function = "audio_clk";
	};
};

&scif0 {
	pinctrl-0 = <&scif0_pins>;
	pinctrl-names = "default";

	status = "okay";
};

&ether {
	pinctrl-0 = <&ether_pins>, <&phy1_pins>;
	pinctrl-names = "default";

	phy-handle = <&phy1>;
	renesas,ether-link-active-low;
	status = "okay";

	phy1: ethernet-phy@1 {
		compatible = "ethernet-phy-id0022.1537",
			     "ethernet-phy-ieee802.3-c22";
		reg = <1>;
		interrupt-parent = <&irqc0>;
		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
		micrel,led-mode = <1>;
		reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
	};
};

&sdhi0 {
	pinctrl-0 = <&sdhi0_pins>;
	pinctrl-names = "default";

	vmmc-supply = <&vcc_sdhi0>;
	vqmmc-supply = <&vccq_sdhi0>;
	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
	status = "okay";
};

&sdhi2 {
	pinctrl-0 = <&sdhi2_pins>;
	pinctrl-names = "default";

	vmmc-supply = <&vcc_sdhi2>;
	vqmmc-supply = <&vccq_sdhi2>;
	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
	status = "okay";
};

&qspi {
	pinctrl-0 = <&qspi_pins>;
	pinctrl-names = "default";

	status = "okay";

	flash@0 {
		compatible = "spansion,s25fl512s", "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <30000000>;
		spi-tx-bus-width = <4>;
		spi-rx-bus-width = <4>;
		m25p,fast-read;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "loader_prg";
				reg = <0x00000000 0x00040000>;
				read-only;
			};
			partition@40000 {
				label = "user_prg";
				reg = <0x00040000 0x00400000>;
				read-only;
			};
			partition@440000 {
				label = "flash_fs";
				reg = <0x00440000 0x03bc0000>;
			};
		};
	};
};

&i2c2 {
	pinctrl-0 = <&i2c2_pins>;
	pinctrl-names = "i2c-hdmi";

	clock-frequency = <400000>;
};

&i2c6 {
	pinctrl-names = "default";
	pinctrl-0 = <&pmic_irq_pins>;
	status = "okay";
	clock-frequency = <100000>;

	pmic@5a {
		compatible = "dlg,da9063l";
		reg = <0x5a>;
		interrupt-parent = <&irqc0>;
		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
		interrupt-controller;
		#interrupt-cells = <2>;

		watchdog {
			compatible = "dlg,da9063-watchdog";
		};
	};

	vdd_dvfs: regulator@68 {
		compatible = "dlg,da9210";
		reg = <0x68>;
		interrupt-parent = <&irqc0>;
		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;

		regulator-min-microvolt = <1000000>;
		regulator-max-microvolt = <1000000>;
		regulator-boot-on;
		regulator-always-on;
	};
};

&sata0 {
	status = "okay";
};

&cpu0 {
	cpu0-supply = <&vdd_dvfs>;
};

/* composite video input */
&vin0 {
	status = "okay";
	pinctrl-0 = <&vin0_pins>;
	pinctrl-names = "default";

	port {
		vin0ep: endpoint {
			remote-endpoint = <&adv7180>;
			bus-width = <8>;
		};
	};
};

&pci0 {
	pinctrl-0 = <&usb0_pins>;
	pinctrl-names = "default";

	status = "okay";
};

&pci1 {
	pinctrl-0 = <&usb1_pins>;
	pinctrl-names = "default";

	status = "okay";
};

&hsusb {
	pinctrl-0 = <&usb0_pins>;
	pinctrl-names = "default";

	status = "okay";
};

&usbphy {
	status = "okay";
};

&pcie_bus_clk {
	clock-frequency = <100000000>;
};

&pciec {
	status = "okay";
};

&can0 {
	pinctrl-0 = <&can0_pins>;
	pinctrl-names = "default";

	status = "okay";
};

&du {
	pinctrl-0 = <&du_pins>;
	pinctrl-names = "default";
	status = "okay";

	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
		 <&x3_clk>, <&x16_clk>;
	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";

	ports {
		port@0 {
			endpoint {
				remote-endpoint = <&adv7511_in>;
			};
		};
	};
};

&lvds0 {
	ports {
		port@1 {
			lvds_connector: endpoint {
			};
		};
	};
};

&rcar_sound {
	pinctrl-0 = <&ssi_pins>, <&audio_clk_pins>;
	pinctrl-names = "default";
	status = "okay";

	/* Single DAI */
	#sound-dai-cells = <0>;

	rcar_sound,dai {
		dai0 {
			playback = <&ssi0>;
			capture  = <&ssi1>;
		};
	};
};

&rwdt {
	timeout-sec = <60>;
	status = "okay";
};

&ssi1 {
	shared-pin;
};
Commit	Line	Data
53633a89 TR	1	// SPDX-License-Identifier: GPL-2.0
	2	/*
	3	* Device Tree Source for the Porter board
	4	*
	5	* Copyright (C) 2015 Cogent Embedded, Inc.
	6	*/
	7
	8	/*
	9	* SSI-AK4642
	10	*
	11	* JP3: 2-1: AK4642
	12	* 2-3: ADV7511
	13	*
	14	* This command is required before playback/capture:
	15	*
	16	* amixer set "LINEOUT Mixer DACL" on
	17	*/
	18
	19	/dts-v1/;
	20	#include "r8a7791.dtsi"
	21	#include <dt-bindings/gpio/gpio.h>
	22
	23	/ {
	24	model = "Porter";
	25	compatible = "renesas,porter", "renesas,r8a7791";
	26
	27	aliases {
	28	serial0 = &scif0;
	29	i2c9 = &gpioi2c2;
	30	i2c10 = &i2chdmi;
	31	mmc0 = &sdhi0;
	32	mmc1 = &sdhi2;
	33	};
	34
	35	chosen {
	36	bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
	37	stdout-path = "serial0:115200n8";
	38	};
	39
	40	memory@40000000 {
	41	device_type = "memory";
	42	reg = <0 0x40000000 0 0x40000000>;
	43	};
	44
	45	memory@200000000 {
	46	device_type = "memory";
	47	reg = <2 0x00000000 0 0x40000000>;
	48	};
	49
93743d24 TR	50	reg_1p8v: regulator-1v8 {
	51	compatible = "regulator-fixed";
	52	regulator-name = "fixed-1.8V";
	53	regulator-min-microvolt = <1800000>;
	54	regulator-max-microvolt = <1800000>;
	55	regulator-boot-on;
	56	regulator-always-on;
	57	};
	58
	59	reg_3p3v: regulator-3v3 {
	60	compatible = "regulator-fixed";
	61	regulator-name = "fixed-3.3V";
	62	regulator-min-microvolt = <3300000>;
	63	regulator-max-microvolt = <3300000>;
	64	regulator-boot-on;
	65	regulator-always-on;
	66	};
	67
53633a89 TR	68	vcc_sdhi0: regulator-vcc-sdhi0 {
	69	compatible = "regulator-fixed";
	70
	71	regulator-name = "SDHI0 Vcc";
	72	regulator-min-microvolt = <3300000>;
	73	regulator-max-microvolt = <3300000>;
	74	regulator-always-on;
	75	};
	76
	77	vccq_sdhi0: regulator-vccq-sdhi0 {
	78	compatible = "regulator-gpio";
	79
	80	regulator-name = "SDHI0 VccQ";
	81	regulator-min-microvolt = <1800000>;
	82	regulator-max-microvolt = <3300000>;
	83
	84	gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
	85	gpios-states = <1>;
	86	states = <3300000 1>, <1800000 0>;
	87	};
	88
	89	vcc_sdhi2: regulator-vcc-sdhi2 {
	90	compatible = "regulator-fixed";
	91
	92	regulator-name = "SDHI2 Vcc";
	93	regulator-min-microvolt = <3300000>;
	94	regulator-max-microvolt = <3300000>;
	95	regulator-always-on;
	96	};
	97
	98	vccq_sdhi2: regulator-vccq-sdhi2 {
	99	compatible = "regulator-gpio";
	100
	101	regulator-name = "SDHI2 VccQ";
	102	regulator-min-microvolt = <1800000>;
	103	regulator-max-microvolt = <3300000>;
	104
	105	gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
	106	gpios-states = <1>;
	107	states = <3300000 1>, <1800000 0>;
	108	};
	109
	110	hdmi-out {
	111	compatible = "hdmi-connector";
	112	type = "a";
	113
	114	port {
	115	hdmi_con: endpoint {
	116	remote-endpoint = <&adv7511_out>;
	117	};
	118	};
	119	};
	120
	121	x3_clk: x3-clock {
	122	compatible = "fixed-clock";
	123	#clock-cells = <0>;
	124	clock-frequency = <148500000>;
	125	};
	126
	127	x16_clk: x16-clock {
	128	compatible = "fixed-clock";
	129	#clock-cells = <0>;
	130	clock-frequency = <74250000>;
	131	};
132
133	x14_clk: audio_clock {
134	compatible = "fixed-clock";
135	#clock-cells = <0>;
136	clock-frequency = <11289600>;
137	};
138
139	sound {
140	compatible = "simple-audio-card";
141
142	simple-audio-card,format = "left_j";
143	simple-audio-card,bitclock-master = <&soundcodec>;
144	simple-audio-card,frame-master = <&soundcodec>;
145
146	simple-audio-card,cpu {
147	sound-dai = <&rcar_sound>;
148	};
149
150	soundcodec: simple-audio-card,codec {
151	sound-dai = <&ak4642>;
152	clocks = <&x14_clk>;
153	};
154	};
155
156	gpioi2c2: i2c-9 {
157	#address-cells = <1>;
158	#size-cells = <0>;
159	compatible = "i2c-gpio";
160	status = "disabled";
161	scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH \| GPIO_OPEN_DRAIN)>;
162	sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH \| GPIO_OPEN_DRAIN)>;
163	i2c-gpio,delay-us = <5>;
164	};
165
166	/*
167	* A fallback to GPIO is provided for I2C2.
168	*/
93743d24	169	i2chdmi: i2c-mux1 {
53633a89 TR	170	compatible = "i2c-demux-pinctrl";
	171	i2c-parent = <&i2c2>, <&gpioi2c2>;
	172	i2c-bus-name = "i2c-hdmi";
	173	#address-cells = <1>;
	174	#size-cells = <0>;
	175
	176	ak4642: codec@12 {
	177	compatible = "asahi-kasei,ak4642";
	178	#sound-dai-cells = <0>;
	179	reg = <0x12>;
	180	};
	181
	182	composite-in@20 {
	183	compatible = "adi,adv7180";
	184	reg = <0x20>;
	185
	186	port {
	187	adv7180: endpoint {
	188	bus-width = <8>;
	189	remote-endpoint = <&vin0ep>;
	190	};
	191	};
	192	};
	193
	194	hdmi@39 {
	195	compatible = "adi,adv7511w";
	196	reg = <0x39>;
	197	interrupt-parent = <&gpio3>;
	198	interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
	199
93743d24 TR	200	avdd-supply = <&reg_1p8v>;
	201	dvdd-supply = <&reg_1p8v>;
	202	pvdd-supply = <&reg_1p8v>;
	203	dvdd-3v-supply = <&reg_3p3v>;
	204	bgvdd-supply = <&reg_1p8v>;
	205
53633a89 TR	206	adi,input-depth = <8>;
	207	adi,input-colorspace = "rgb";
	208	adi,input-clock = "1x";
	209
	210	ports {
	211	#address-cells = <1>;
	212	#size-cells = <0>;
	213
	214	port@0 {
	215	reg = <0>;
	216	adv7511_in: endpoint {
	217	remote-endpoint = <&du_out_rgb>;
	218	};
	219	};
	220
	221	port@1 {
	222	reg = <1>;
	223	adv7511_out: endpoint {
	224	remote-endpoint = <&hdmi_con>;
	225	};
	226	};
	227	};
	228	};
	229	};
	230	};
	231
	232	&extal_clk {
	233	clock-frequency = <20000000>;
	234	};
	235
	236	&pfc {
	237	scif0_pins: scif0 {
	238	groups = "scif0_data_d";
	239	function = "scif0";
	240	};
	241
	242	ether_pins: ether {
	243	groups = "eth_link", "eth_mdio", "eth_rmii";
	244	function = "eth";
	245	};
	246
	247	phy1_pins: phy1 {
	248	groups = "intc_irq0";
	249	function = "intc";
	250	};
	251
	252	pmic_irq_pins: pmicirq {
	253	groups = "intc_irq2";
	254	function = "intc";
	255	};
	256
	257	sdhi0_pins: sd0 {
	258	groups = "sdhi0_data4", "sdhi0_ctrl";
	259	function = "sdhi0";
	260	};
	261
	262	sdhi2_pins: sd2 {
	263	groups = "sdhi2_data4", "sdhi2_ctrl";
	264	function = "sdhi2";
	265	};
	266
	267	qspi_pins: qspi {
	268	groups = "qspi_ctrl", "qspi_data4";
	269	function = "qspi";
270	};
271
272	i2c2_pins: i2c2 {
273	groups = "i2c2";
274	function = "i2c2";
275	};
276
277	usb0_pins: usb0 {
278	groups = "usb0";
279	function = "usb0";
280	};
281
282	usb1_pins: usb1 {
283	groups = "usb1";
284	function = "usb1";
285	};
286
287	vin0_pins: vin0 {
288	groups = "vin0_data8", "vin0_clk";
289	function = "vin0";
290	};
291
292	can0_pins: can0 {
293	groups = "can0_data";
294	function = "can0";
295	};
296
297	du_pins: du {
298	groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
299	function = "du";
300	};
301
302	ssi_pins: sound {
303	groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
304	function = "ssi";
305	};
306
307	audio_clk_pins: audio_clk {
308	groups = "audio_clk_a";
309	function = "audio_clk";
310	};
311	};
312
313	&scif0 {
314	pinctrl-0 = <&scif0_pins>;
315	pinctrl-names = "default";
316
317	status = "okay";
318	};
319
320	&ether {
321	pinctrl-0 = <&ether_pins>, <&phy1_pins>;
322	pinctrl-names = "default";
323
324	phy-handle = <&phy1>;
325	renesas,ether-link-active-low;
326	status = "okay";
327
328	phy1: ethernet-phy@1 {
329	compatible = "ethernet-phy-id0022.1537",
330	"ethernet-phy-ieee802.3-c22";
331	reg = <1>;
332	interrupt-parent = <&irqc0>;
333	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
334	micrel,led-mode = <1>;
335	reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
336	};
337	};
338
339	&sdhi0 {
340	pinctrl-0 = <&sdhi0_pins>;
341	pinctrl-names = "default";
342
343	vmmc-supply = <&vcc_sdhi0>;
344	vqmmc-supply = <&vccq_sdhi0>;
345	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
346	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
347	status = "okay";
348	};
349
350	&sdhi2 {
351	pinctrl-0 = <&sdhi2_pins>;
352	pinctrl-names = "default";
353
354	vmmc-supply = <&vcc_sdhi2>;
355	vqmmc-supply = <&vccq_sdhi2>;
356	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
357	status = "okay";
358	};
359
360	&qspi {
361	pinctrl-0 = <&qspi_pins>;
362	pinctrl-names = "default";
363
364	status = "okay";
365
366	flash@0 {
367	compatible = "spansion,s25fl512s", "jedec,spi-nor";
368	reg = <0>;
369	spi-max-frequency = <30000000>;
370	spi-tx-bus-width = <4>;
371	spi-rx-bus-width = <4>;
372	m25p,fast-read;
373
374	partitions {
375	compatible = "fixed-partitions";
376	#address-cells = <1>;
377	#size-cells = <1>;
378
379	partition@0 {
380	label = "loader_prg";
381	reg = <0x00000000 0x00040000>;
382	read-only;
383	};
384	partition@40000 {
385	label = "user_prg";
386	reg = <0x00040000 0x00400000>;
387	read-only;
388	};
389	partition@440000 {
390	label = "flash_fs";
391	reg = <0x00440000 0x03bc0000>;
392	};
393	};
394	};
395	};
396
397	&i2c2 {
398	pinctrl-0 = <&i2c2_pins>;
399	pinctrl-names = "i2c-hdmi";
400
401	clock-frequency = <400000>;
402	};
403
404	&i2c6 {
405	pinctrl-names = "default";
406	pinctrl-0 = <&pmic_irq_pins>;
407	status = "okay";
408	clock-frequency = <100000>;
409
410	pmic@5a {
411	compatible = "dlg,da9063l";
412	reg = <0x5a>;
413	interrupt-parent = <&irqc0>;
414	interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
415	interrupt-controller;
93743d24	416	#interrupt-cells = <2>;
53633a89 TR	417
	418	watchdog {
	419	compatible = "dlg,da9063-watchdog";
	420	};
	421	};
	422
	423	vdd_dvfs: regulator@68 {
	424	compatible = "dlg,da9210";
	425	reg = <0x68>;
	426	interrupt-parent = <&irqc0>;
	427	interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
	428
	429	regulator-min-microvolt = <1000000>;
	430	regulator-max-microvolt = <1000000>;
	431	regulator-boot-on;
	432	regulator-always-on;
	433	};
	434	};
	435
	436	&sata0 {
	437	status = "okay";
	438	};
	439
	440	&cpu0 {
	441	cpu0-supply = <&vdd_dvfs>;
	442	};
	443
	444	/* composite video input */
	445	&vin0 {
	446	status = "okay";
	447	pinctrl-0 = <&vin0_pins>;
	448	pinctrl-names = "default";
	449
	450	port {
	451	vin0ep: endpoint {
	452	remote-endpoint = <&adv7180>;
	453	bus-width = <8>;
	454	};
	455	};
	456	};
	457
	458	&pci0 {
	459	pinctrl-0 = <&usb0_pins>;
	460	pinctrl-names = "default";
	461
	462	status = "okay";
	463	};
	464
	465	&pci1 {
	466	pinctrl-0 = <&usb1_pins>;
	467	pinctrl-names = "default";
	468
	469	status = "okay";
	470	};
	471
	472	&hsusb {
	473	pinctrl-0 = <&usb0_pins>;
	474	pinctrl-names = "default";
	475
	476	status = "okay";
	477	};
	478
	479	&usbphy {
	480	status = "okay";
481	};
482
483	&pcie_bus_clk {
484	clock-frequency = <100000000>;
485	};
486
487	&pciec {
488	status = "okay";
489	};
490
491	&can0 {
492	pinctrl-0 = <&can0_pins>;
493	pinctrl-names = "default";
494
495	status = "okay";
496	};
497
498	&du {
499	pinctrl-0 = <&du_pins>;
500	pinctrl-names = "default";
501	status = "okay";
502
503	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
504	<&x3_clk>, <&x16_clk>;
505	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
506
507	ports {
508	port@0 {
509	endpoint {
510	remote-endpoint = <&adv7511_in>;
511	};
512	};
513	};
514	};
515
516	&lvds0 {
517	ports {
518	port@1 {
519	lvds_connector: endpoint {
520	};
521	};
522	};
523	};
524
525	&rcar_sound {
526	pinctrl-0 = <&ssi_pins>, <&audio_clk_pins>;
527	pinctrl-names = "default";
528	status = "okay";
529
530	/* Single DAI */
531	#sound-dai-cells = <0>;
532
533	rcar_sound,dai {
534	dai0 {
535	playback = <&ssi0>;
536	capture = <&ssi1>;
537	};
538	};
539	};
540
541	&rwdt {
542	timeout-sec = <60>;
543	status = "okay";
544	};
545
546	&ssi1 {
547	shared-pin;
548	};