]>
Commit | Line | Data |
---|---|---|
53633a89 TR |
1 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
2 | /* | |
3 | * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. | |
4 | */ | |
5 | ||
6 | #include "dt-bindings/pwm/pwm.h" | |
7 | #include "dt-bindings/input/input.h" | |
8 | #include "rk3399.dtsi" | |
9 | #include "rk3399-opp.dtsi" | |
10 | ||
11 | / { | |
12 | compatible = "rockchip,rk3399-sapphire", "rockchip,rk3399"; | |
13 | ||
14 | aliases { | |
15 | mmc0 = &sdmmc; | |
16 | mmc1 = &sdhci; | |
17 | }; | |
18 | ||
19 | chosen { | |
20 | stdout-path = "serial2:1500000n8"; | |
21 | }; | |
22 | ||
23 | clkin_gmac: external-gmac-clock { | |
24 | compatible = "fixed-clock"; | |
25 | clock-frequency = <125000000>; | |
26 | clock-output-names = "clkin_gmac"; | |
27 | #clock-cells = <0>; | |
28 | }; | |
29 | ||
30 | dc_12v: dc-12v { | |
31 | compatible = "regulator-fixed"; | |
32 | regulator-name = "dc_12v"; | |
33 | regulator-always-on; | |
34 | regulator-boot-on; | |
35 | regulator-min-microvolt = <12000000>; | |
36 | regulator-max-microvolt = <12000000>; | |
37 | }; | |
38 | ||
39 | /* | |
40 | * The fan power supply comes from the baseboard. | |
41 | * For the standalone Sapphire one option is to connect a wire | |
42 | * from R90030 DNP R0805 pin2 to C90002 10uF C0805 pin1 (vcc_sys). | |
43 | */ | |
44 | fan0: gpio-fan { | |
45 | #cooling-cells = <2>; | |
46 | compatible = "gpio-fan"; | |
47 | gpio-fan,speed-map = <0 0 3000 1>; | |
48 | gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>; | |
49 | status = "okay"; | |
50 | }; | |
51 | ||
52 | keys: gpio-keys { | |
53 | compatible = "gpio-keys"; | |
54 | autorepeat; | |
55 | ||
56 | key-power { | |
57 | debounce-interval = <100>; | |
58 | gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; | |
59 | label = "GPIO Power"; | |
60 | linux,code = <KEY_POWER>; | |
61 | linux,input-type = <1>; | |
62 | pinctrl-names = "default"; | |
63 | pinctrl-0 = <&pwr_btn>; | |
64 | wakeup-source; | |
65 | }; | |
66 | }; | |
67 | ||
68 | /* switched by pmic_sleep */ | |
69 | vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { | |
70 | compatible = "regulator-fixed"; | |
71 | regulator-name = "vcc1v8_s3"; | |
72 | regulator-always-on; | |
73 | regulator-boot-on; | |
74 | regulator-min-microvolt = <1800000>; | |
75 | regulator-max-microvolt = <1800000>; | |
76 | vin-supply = <&vcc_1v8>; | |
77 | }; | |
78 | ||
79 | vcc3v0_sd: vcc3v0-sd { | |
80 | compatible = "regulator-fixed"; | |
81 | enable-active-high; | |
82 | gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; | |
83 | pinctrl-names = "default"; | |
84 | pinctrl-0 = <&sdmmc0_pwr_h>; | |
85 | regulator-always-on; | |
86 | regulator-max-microvolt = <3000000>; | |
87 | regulator-min-microvolt = <3000000>; | |
88 | regulator-name = "vcc3v0_sd"; | |
89 | vin-supply = <&vcc3v3_sys>; | |
90 | }; | |
91 | ||
92 | vcc3v3_sys: vcc3v3-sys { | |
93 | compatible = "regulator-fixed"; | |
94 | regulator-name = "vcc3v3_sys"; | |
95 | regulator-always-on; | |
96 | regulator-boot-on; | |
97 | regulator-min-microvolt = <3300000>; | |
98 | regulator-max-microvolt = <3300000>; | |
99 | vin-supply = <&vcc_sys>; | |
100 | }; | |
101 | ||
102 | vcc5v0_host: vcc5v0-host-regulator { | |
103 | compatible = "regulator-fixed"; | |
104 | enable-active-high; | |
105 | gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; | |
106 | pinctrl-names = "default"; | |
107 | pinctrl-0 = <&vcc5v0_host_en>; | |
108 | regulator-name = "vcc5v0_host"; | |
109 | regulator-always-on; | |
110 | vin-supply = <&vcc_sys>; | |
111 | }; | |
112 | ||
113 | vcc5v0_typec0: vcc5v0-typec0-regulator { | |
114 | compatible = "regulator-fixed"; | |
115 | enable-active-high; | |
116 | gpio = <&gpio2 RK_PA0 GPIO_ACTIVE_HIGH>; | |
117 | pinctrl-names = "default"; | |
118 | pinctrl-0 = <&vcc5v0_typec0_en>; | |
119 | regulator-name = "vcc5v0_typec0"; | |
120 | vin-supply = <&vcc_sys>; | |
121 | }; | |
122 | ||
123 | vcc_sys: vcc-sys { | |
124 | compatible = "regulator-fixed"; | |
125 | regulator-name = "vcc_sys"; | |
126 | regulator-always-on; | |
127 | regulator-boot-on; | |
128 | regulator-min-microvolt = <5000000>; | |
129 | regulator-max-microvolt = <5000000>; | |
130 | vin-supply = <&dc_12v>; | |
131 | }; | |
132 | ||
133 | vdd_log: vdd-log { | |
134 | compatible = "pwm-regulator"; | |
135 | pwms = <&pwm2 0 25000 1>; | |
136 | pwm-supply = <&vcc_sys>; | |
137 | regulator-name = "vdd_log"; | |
138 | regulator-always-on; | |
139 | regulator-boot-on; | |
140 | regulator-min-microvolt = <800000>; | |
141 | regulator-max-microvolt = <1400000>; | |
142 | }; | |
143 | }; | |
144 | ||
145 | &cpu_l0 { | |
146 | cpu-supply = <&vdd_cpu_l>; | |
147 | }; | |
148 | ||
149 | &cpu_l1 { | |
150 | cpu-supply = <&vdd_cpu_l>; | |
151 | }; | |
152 | ||
153 | &cpu_l2 { | |
154 | cpu-supply = <&vdd_cpu_l>; | |
155 | }; | |
156 | ||
157 | &cpu_l3 { | |
158 | cpu-supply = <&vdd_cpu_l>; | |
159 | }; | |
160 | ||
161 | &cpu_b0 { | |
162 | cpu-supply = <&vdd_cpu_b>; | |
163 | }; | |
164 | ||
165 | &cpu_b1 { | |
166 | cpu-supply = <&vdd_cpu_b>; | |
167 | }; | |
168 | ||
169 | &cpu_thermal { | |
170 | trips { | |
171 | cpu_hot: cpu_hot { | |
172 | hysteresis = <10000>; | |
173 | temperature = <55000>; | |
174 | type = "active"; | |
175 | }; | |
176 | }; | |
177 | ||
178 | cooling-maps { | |
179 | map2 { | |
180 | cooling-device = | |
181 | <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; | |
182 | trip = <&cpu_hot>; | |
183 | }; | |
184 | }; | |
185 | }; | |
186 | ||
187 | &emmc_phy { | |
188 | status = "okay"; | |
189 | }; | |
190 | ||
191 | &gmac { | |
192 | assigned-clocks = <&cru SCLK_RMII_SRC>; | |
193 | assigned-clock-parents = <&clkin_gmac>; | |
194 | clock_in_out = "input"; | |
195 | phy-supply = <&vcc_lan>; | |
196 | phy-mode = "rgmii"; | |
197 | pinctrl-names = "default"; | |
198 | pinctrl-0 = <&rgmii_pins>; | |
199 | snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; | |
200 | snps,reset-active-low; | |
201 | snps,reset-delays-us = <0 10000 50000>; | |
202 | tx_delay = <0x28>; | |
203 | rx_delay = <0x11>; | |
204 | status = "okay"; | |
205 | }; | |
206 | ||
207 | &gpu { | |
208 | mali-supply = <&vdd_gpu>; | |
209 | status = "okay"; | |
210 | }; | |
211 | ||
212 | &hdmi { | |
213 | ddc-i2c-bus = <&i2c3>; | |
214 | status = "okay"; | |
215 | }; | |
216 | ||
217 | &hdmi_sound { | |
218 | status = "okay"; | |
219 | }; | |
220 | ||
221 | &i2c0 { | |
222 | clock-frequency = <400000>; | |
223 | i2c-scl-rising-time-ns = <168>; | |
224 | i2c-scl-falling-time-ns = <4>; | |
225 | status = "okay"; | |
226 | ||
227 | rk808: pmic@1b { | |
228 | compatible = "rockchip,rk808"; | |
229 | reg = <0x1b>; | |
230 | interrupt-parent = <&gpio1>; | |
231 | interrupts = <21 IRQ_TYPE_LEVEL_LOW>; | |
232 | #clock-cells = <1>; | |
233 | clock-output-names = "xin32k", "rk808-clkout2"; | |
234 | pinctrl-names = "default"; | |
235 | pinctrl-0 = <&pmic_int_l>; | |
236 | rockchip,system-power-controller; | |
237 | wakeup-source; | |
238 | ||
239 | vcc1-supply = <&vcc_sys>; | |
240 | vcc2-supply = <&vcc_sys>; | |
241 | vcc3-supply = <&vcc_sys>; | |
242 | vcc4-supply = <&vcc_sys>; | |
243 | vcc6-supply = <&vcc_sys>; | |
244 | vcc7-supply = <&vcc_sys>; | |
245 | vcc8-supply = <&vcc3v3_sys>; | |
246 | vcc9-supply = <&vcc_sys>; | |
247 | vcc10-supply = <&vcc_sys>; | |
248 | vcc11-supply = <&vcc_sys>; | |
249 | vcc12-supply = <&vcc3v3_sys>; | |
250 | vddio-supply = <&vcc1v8_pmu>; | |
251 | ||
252 | regulators { | |
253 | vdd_center: DCDC_REG1 { | |
254 | regulator-name = "vdd_center"; | |
255 | regulator-always-on; | |
256 | regulator-boot-on; | |
257 | regulator-min-microvolt = <750000>; | |
258 | regulator-max-microvolt = <1350000>; | |
259 | regulator-ramp-delay = <6001>; | |
260 | regulator-state-mem { | |
261 | regulator-off-in-suspend; | |
262 | }; | |
263 | }; | |
264 | ||
265 | vdd_cpu_l: DCDC_REG2 { | |
266 | regulator-name = "vdd_cpu_l"; | |
267 | regulator-always-on; | |
268 | regulator-boot-on; | |
269 | regulator-min-microvolt = <750000>; | |
270 | regulator-max-microvolt = <1350000>; | |
271 | regulator-ramp-delay = <6001>; | |
272 | regulator-state-mem { | |
273 | regulator-off-in-suspend; | |
274 | }; | |
275 | }; | |
276 | ||
277 | vcc_ddr: DCDC_REG3 { | |
278 | regulator-name = "vcc_ddr"; | |
279 | regulator-always-on; | |
280 | regulator-boot-on; | |
281 | regulator-state-mem { | |
282 | regulator-on-in-suspend; | |
283 | }; | |
284 | }; | |
285 | ||
286 | vcc_1v8: DCDC_REG4 { | |
287 | regulator-name = "vcc_1v8"; | |
288 | regulator-always-on; | |
289 | regulator-boot-on; | |
290 | regulator-min-microvolt = <1800000>; | |
291 | regulator-max-microvolt = <1800000>; | |
292 | regulator-state-mem { | |
293 | regulator-on-in-suspend; | |
294 | regulator-suspend-microvolt = <1800000>; | |
295 | }; | |
296 | }; | |
297 | ||
298 | vcc1v8_dvp: LDO_REG1 { | |
299 | regulator-name = "vcc1v8_dvp"; | |
300 | regulator-always-on; | |
301 | regulator-boot-on; | |
302 | regulator-min-microvolt = <1800000>; | |
303 | regulator-max-microvolt = <1800000>; | |
304 | regulator-state-mem { | |
305 | regulator-off-in-suspend; | |
306 | }; | |
307 | }; | |
308 | ||
309 | vcc3v0_tp: LDO_REG2 { | |
310 | regulator-name = "vcc3v0_tp"; | |
311 | regulator-always-on; | |
312 | regulator-boot-on; | |
313 | regulator-min-microvolt = <3000000>; | |
314 | regulator-max-microvolt = <3000000>; | |
315 | regulator-state-mem { | |
316 | regulator-off-in-suspend; | |
317 | }; | |
318 | }; | |
319 | ||
320 | vcc1v8_pmu: LDO_REG3 { | |
321 | regulator-name = "vcc1v8_pmu"; | |
322 | regulator-always-on; | |
323 | regulator-boot-on; | |
324 | regulator-min-microvolt = <1800000>; | |
325 | regulator-max-microvolt = <1800000>; | |
326 | regulator-state-mem { | |
327 | regulator-on-in-suspend; | |
328 | regulator-suspend-microvolt = <1800000>; | |
329 | }; | |
330 | }; | |
331 | ||
332 | vcc_sdio: LDO_REG4 { | |
333 | regulator-name = "vcc_sdio"; | |
334 | regulator-always-on; | |
335 | regulator-boot-on; | |
336 | regulator-min-microvolt = <1800000>; | |
337 | regulator-max-microvolt = <3300000>; | |
338 | regulator-state-mem { | |
339 | regulator-on-in-suspend; | |
340 | regulator-suspend-microvolt = <3000000>; | |
341 | }; | |
342 | }; | |
343 | ||
344 | vcca3v0_codec: LDO_REG5 { | |
345 | regulator-name = "vcca3v0_codec"; | |
346 | regulator-always-on; | |
347 | regulator-boot-on; | |
348 | regulator-min-microvolt = <3000000>; | |
349 | regulator-max-microvolt = <3000000>; | |
350 | regulator-state-mem { | |
351 | regulator-off-in-suspend; | |
352 | }; | |
353 | }; | |
354 | ||
355 | vcc_1v5: LDO_REG6 { | |
356 | regulator-name = "vcc_1v5"; | |
357 | regulator-always-on; | |
358 | regulator-boot-on; | |
359 | regulator-min-microvolt = <1500000>; | |
360 | regulator-max-microvolt = <1500000>; | |
361 | regulator-state-mem { | |
362 | regulator-on-in-suspend; | |
363 | regulator-suspend-microvolt = <1500000>; | |
364 | }; | |
365 | }; | |
366 | ||
367 | vcca1v8_codec: LDO_REG7 { | |
368 | regulator-name = "vcca1v8_codec"; | |
369 | regulator-always-on; | |
370 | regulator-boot-on; | |
371 | regulator-min-microvolt = <1800000>; | |
372 | regulator-max-microvolt = <1800000>; | |
373 | regulator-state-mem { | |
374 | regulator-off-in-suspend; | |
375 | }; | |
376 | }; | |
377 | ||
378 | vcc_3v0: LDO_REG8 { | |
379 | regulator-name = "vcc_3v0"; | |
380 | regulator-always-on; | |
381 | regulator-boot-on; | |
382 | regulator-min-microvolt = <3000000>; | |
383 | regulator-max-microvolt = <3000000>; | |
384 | regulator-state-mem { | |
385 | regulator-on-in-suspend; | |
386 | regulator-suspend-microvolt = <3000000>; | |
387 | }; | |
388 | }; | |
389 | ||
390 | vcc3v3_s3: vcc_lan: SWITCH_REG1 { | |
391 | regulator-name = "vcc3v3_s3"; | |
392 | regulator-always-on; | |
393 | regulator-boot-on; | |
394 | regulator-state-mem { | |
395 | regulator-off-in-suspend; | |
396 | }; | |
397 | }; | |
398 | ||
399 | vcc3v3_s0: SWITCH_REG2 { | |
400 | regulator-name = "vcc3v3_s0"; | |
401 | regulator-always-on; | |
402 | regulator-boot-on; | |
403 | regulator-state-mem { | |
404 | regulator-off-in-suspend; | |
405 | }; | |
406 | }; | |
407 | }; | |
408 | }; | |
409 | ||
410 | vdd_cpu_b: regulator@40 { | |
411 | compatible = "silergy,syr827"; | |
412 | reg = <0x40>; | |
413 | fcs,suspend-voltage-selector = <1>; | |
414 | regulator-name = "vdd_cpu_b"; | |
415 | regulator-min-microvolt = <712500>; | |
416 | regulator-max-microvolt = <1500000>; | |
417 | regulator-ramp-delay = <1000>; | |
418 | regulator-always-on; | |
419 | regulator-boot-on; | |
420 | vin-supply = <&vcc_sys>; | |
421 | ||
422 | regulator-state-mem { | |
423 | regulator-off-in-suspend; | |
424 | }; | |
425 | }; | |
426 | ||
427 | vdd_gpu: regulator@41 { | |
428 | compatible = "silergy,syr828"; | |
429 | reg = <0x41>; | |
430 | fcs,suspend-voltage-selector = <1>; | |
431 | regulator-name = "vdd_gpu"; | |
432 | regulator-min-microvolt = <712500>; | |
433 | regulator-max-microvolt = <1500000>; | |
434 | regulator-ramp-delay = <1000>; | |
435 | regulator-always-on; | |
436 | regulator-boot-on; | |
437 | vin-supply = <&vcc_sys>; | |
438 | ||
439 | regulator-state-mem { | |
440 | regulator-off-in-suspend; | |
441 | }; | |
442 | }; | |
443 | }; | |
444 | ||
445 | &i2c3 { | |
446 | i2c-scl-rising-time-ns = <450>; | |
447 | i2c-scl-falling-time-ns = <15>; | |
448 | status = "okay"; | |
449 | }; | |
450 | ||
451 | &i2s2 { | |
452 | status = "okay"; | |
453 | }; | |
454 | ||
455 | &io_domains { | |
456 | status = "okay"; | |
457 | ||
458 | bt656-supply = <&vcc_3v0>; | |
459 | audio-supply = <&vcca1v8_codec>; | |
460 | sdmmc-supply = <&vcc_sdio>; | |
461 | gpio1830-supply = <&vcc_3v0>; | |
462 | }; | |
463 | ||
464 | &pmu_io_domains { | |
465 | pmu1830-supply = <&vcc_3v0>; | |
466 | status = "okay"; | |
467 | }; | |
468 | ||
469 | &pinctrl { | |
470 | buttons { | |
471 | pwr_btn: pwr-btn { | |
472 | rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; | |
473 | }; | |
474 | }; | |
475 | ||
476 | fan { | |
477 | motor_pwr: motor-pwr { | |
478 | rockchip,pins = | |
479 | <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; | |
480 | }; | |
481 | }; | |
482 | ||
483 | pmic { | |
484 | pmic_int_l: pmic-int-l { | |
485 | rockchip,pins = | |
486 | <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; | |
487 | }; | |
488 | ||
489 | vsel1_pin: vsel1-pin { | |
490 | rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; | |
491 | }; | |
492 | ||
493 | vsel2_pin: vsel2-pin { | |
494 | rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; | |
495 | }; | |
496 | }; | |
497 | ||
498 | sd { | |
499 | sdmmc0_pwr_h: sdmmc0-pwr-h { | |
500 | rockchip,pins = | |
501 | <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; | |
502 | }; | |
503 | }; | |
504 | ||
505 | usb2 { | |
506 | vcc5v0_host_en: vcc5v0-host-en { | |
507 | rockchip,pins = | |
508 | <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; | |
509 | }; | |
510 | vcc5v0_typec0_en: vcc5v0-typec0-en { | |
511 | rockchip,pins = | |
512 | <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; | |
513 | }; | |
514 | }; | |
515 | }; | |
516 | ||
517 | &pwm0 { | |
518 | status = "okay"; | |
519 | }; | |
520 | ||
521 | &pwm2 { | |
522 | status = "okay"; | |
523 | }; | |
524 | ||
525 | &saradc { | |
526 | vref-supply = <&vcca1v8_s3>; | |
527 | status = "okay"; | |
528 | }; | |
529 | ||
530 | &sdhci { | |
531 | bus-width = <8>; | |
532 | mmc-hs400-1_8v; | |
533 | mmc-hs400-enhanced-strobe; | |
534 | non-removable; | |
535 | status = "okay"; | |
536 | }; | |
537 | ||
538 | &sdmmc { | |
539 | broken-cd; | |
540 | bus-width = <4>; | |
541 | cap-mmc-highspeed; | |
542 | cap-sd-highspeed; | |
543 | clock-frequency = <150000000>; | |
544 | disable-wp; | |
545 | max-frequency = <150000000>; | |
546 | pinctrl-names = "default"; | |
547 | pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; | |
548 | vmmc-supply = <&vcc3v0_sd>; | |
549 | vqmmc-supply = <&vcc_sdio>; | |
550 | status = "okay"; | |
551 | }; | |
552 | ||
553 | &tcphy0 { | |
554 | status = "okay"; | |
555 | }; | |
556 | ||
557 | &tcphy1 { | |
558 | status = "okay"; | |
559 | }; | |
560 | ||
561 | &tsadc { | |
562 | /* tshut mode 0:CRU 1:GPIO */ | |
563 | rockchip,hw-tshut-mode = <1>; | |
564 | /* tshut polarity 0:LOW 1:HIGH */ | |
565 | rockchip,hw-tshut-polarity = <1>; | |
566 | status = "okay"; | |
567 | }; | |
568 | ||
569 | &u2phy0 { | |
570 | status = "okay"; | |
571 | ||
572 | u2phy0_otg: otg-port { | |
573 | status = "okay"; | |
574 | }; | |
575 | ||
576 | u2phy0_host: host-port { | |
577 | phy-supply = <&vcc5v0_typec0>; | |
578 | status = "okay"; | |
579 | }; | |
580 | }; | |
581 | ||
582 | &u2phy1 { | |
583 | status = "okay"; | |
584 | ||
585 | u2phy1_otg: otg-port { | |
586 | status = "okay"; | |
587 | }; | |
588 | ||
589 | u2phy1_host: host-port { | |
590 | phy-supply = <&vcc5v0_host>; | |
591 | status = "okay"; | |
592 | }; | |
593 | }; | |
594 | ||
595 | &uart0 { | |
596 | pinctrl-names = "default"; | |
597 | pinctrl-0 = <&uart0_xfer &uart0_cts>; | |
598 | status = "okay"; | |
599 | }; | |
600 | ||
601 | &uart2 { | |
602 | status = "okay"; | |
603 | }; | |
604 | ||
605 | &usb_host0_ehci { | |
606 | status = "okay"; | |
607 | }; | |
608 | ||
609 | &usb_host0_ohci { | |
610 | status = "okay"; | |
611 | }; | |
612 | ||
613 | &usb_host1_ehci { | |
614 | status = "okay"; | |
615 | }; | |
616 | ||
617 | &usb_host1_ohci { | |
618 | status = "okay"; | |
619 | }; | |
620 | ||
621 | &usbdrd3_0 { | |
622 | status = "okay"; | |
623 | }; | |
624 | ||
625 | &usbdrd_dwc3_0 { | |
626 | status = "okay"; | |
627 | dr_mode = "host"; | |
628 | }; | |
629 | ||
630 | &usbdrd3_1 { | |
631 | status = "okay"; | |
632 | }; | |
633 | ||
634 | &usbdrd_dwc3_1 { | |
635 | status = "okay"; | |
636 | dr_mode = "host"; | |
637 | }; | |
638 | ||
639 | &vopb { | |
640 | status = "okay"; | |
641 | }; | |
642 | ||
643 | &vopb_mmu { | |
644 | status = "okay"; | |
645 | }; | |
646 | ||
647 | &vopl { | |
648 | status = "okay"; | |
649 | }; | |
650 | ||
651 | &vopl_mmu { | |
652 | status = "okay"; | |
653 | }; |