Optimization: revert WCCP setup to using sockaddr_in

[thirdparty/squid.git] / src / cf.data.pre

#
# SQUID Web Proxy Cache		http://www.squid-cache.org/
# ----------------------------------------------------------
#
#  Squid is the result of efforts by numerous individuals from
#  the Internet community; see the CONTRIBUTORS file for full
#  details.   Many organizations have provided support for Squid's
#  development; see the SPONSORS file for full details.  Squid is
#  Copyrighted (C) 2000 by the Regents of the University of
#  California; see the COPYRIGHT file for full details.  Squid
#  incorporates software developed and/or copyrighted by other
#  sources; see the CREDITS file for full details.
#
#  This program is free software; you can redistribute it and/or modify
#  it under the terms of the GNU General Public License as published by
#  the Free Software Foundation; either version 2 of the License, or
#  (at your option) any later version.
#
#  This program is distributed in the hope that it will be useful,
#  but WITHOUT ANY WARRANTY; without even the implied warranty of
#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#  GNU General Public License for more details.
#
#  You should have received a copy of the GNU General Public License
#  along with this program; if not, write to the Free Software
#  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111, USA.
#

COMMENT_START
	WELCOME TO @SQUID@
	----------------------------

	This is the default Squid configuration file. You may wish
	to look at the Squid home page (http://www.squid-cache.org/)
	for the FAQ and other documentation.

	The default Squid config file shows what the defaults for
	various options happen to be.  If you don't need to change the
	default, you shouldn't uncomment the line.  Doing so may cause
	run-time problems.  In some cases "none" refers to no default
	setting at all, while in other cases it refers to a valid
	option - the comments for that keyword indicate if this is the
	case.

COMMENT_END

COMMENT_START
  Configuration options can be included using the "include" directive.
  Include takes a list of files to include. Quoting and wildcards is
  supported.

  For example,

  include /path/to/included/file/squid.acl.config

  Includes can be nested up to a hard-coded depth of 16 levels.
  This arbitrary restriction is to prevent recursive include references
  from causing Squid entering an infinite loop whilst trying to load
  configuration files.


  Conditional configuration

	If-statements can be used to make configuration directives
	depend on conditions:

	    if <CONDITION>
	        ... regular configuration directives ...
	    [else
	        ... regular configuration directives ...]
	    endif

	The else part is optional. The keywords "if", "else", and "endif"
	must be typed on their own lines, as if they were regular
	configuration directives.

	These individual conditions types are supported:

	    true
		Always evaluates to true.
	    false
		Always evaluates to false.
	    <integer> = <integer>
	        Equality comparison of two integer numbers.


  SMP-Related Macros

	The following SMP-related preprocessor macros can be used.

	${process_name} expands to the current Squid process "name"
	(e.g., squid1, squid2, or cache1).

	${process_number} expands to the current Squid process
	identifier, which is an integer number (e.g., 1, 2, 3) unique
	across all Squid processes.
COMMENT_END

# Options Removed in 3.2
NAME: ignore_expect_100
TYPE: obsolete
DOC_START
	Remove this line. The HTTP/1.1 feature is now fully supported by default.
DOC_END

NAME: ftp_list_width
TYPE: obsolete
DOC_START
	Remove this line. Configure FTP page display using the CSS controls in errorpages.css instead.
DOC_END

NAME: url_rewrite_concurrency
TYPE: obsolete
DOC_START
	Remove this line. Set the 'concurrency=' option of url_rewrite_children instead.
DOC_END

# Options Removed in 3.1
NAME: dns_testnames
TYPE: obsolete
DOC_START
	Remove this line. DNS is no longer tested on startup.
DOC_END

NAME: extension_methods
TYPE: obsolete
DOC_START
	Remove this line. All valid methods for HTTP are accepted by default.
DOC_END

# 2.7 Options Removed/Replaced in 3.1
NAME: incoming_rate
TYPE: obsolete
DOC_NONE

NAME: server_http11
TYPE: obsolete
DOC_START
	Remove this line. HTTP/1.1 is supported by default.
DOC_END

NAME: upgrade_http0.9
TYPE: obsolete
DOC_START
	Remove this line. ICY/1.0 streaming protocol is supported by default.
DOC_END

NAME: zph_local zph_mode zph_option zph_parent zph_sibling
TYPE: obsolete
DOC_START
	Alter these entries. Use the qos_flows directive instead.
DOC_END

# Options Removed in 3.0
NAME: header_access
TYPE: obsolete
DOC_START
	Since squid-3.0 replace with request_header_access or reply_header_access
	depending on whether you wish to match client requests or server replies.
DOC_END

NAME: httpd_accel_no_pmtu_disc
TYPE: obsolete
DOC_START
	Since squid-3.0 use the 'disable-pmtu-discovery' flag on http_port instead.
DOC_END

COMMENT_START
 OPTIONS FOR AUTHENTICATION
 -----------------------------------------------------------------------------
COMMENT_END

NAME: auth_param
TYPE: authparam
IFDEF: USE_AUTH
LOC: Auth::TheConfig
DEFAULT: none
DOC_START
	This is used to define parameters for the various authentication
	schemes supported by Squid.

	format: auth_param scheme parameter [setting]

	The order in which authentication schemes are presented to the client is
	dependent on the order the scheme first appears in config file. IE
	has a bug (it's not RFC 2617 compliant) in that it will use the basic
	scheme if basic is the first entry presented, even if more secure
	schemes are presented. For now use the order in the recommended
	settings section below. If other browsers have difficulties (don't
	recognize the schemes offered even if you are using basic) either
	put basic first, or disable the other schemes (by commenting out their
	program entry).

	Once an authentication scheme is fully configured, it can only be
	shutdown by shutting squid down and restarting. Changes can be made on
	the fly and activated with a reconfigure. I.E. You can change to a
	different helper, but not unconfigure the helper completely.

	Please note that while this directive defines how Squid processes
	authentication it does not automatically activate authentication.
	To use authentication you must in addition make use of ACLs based
	on login name in http_access (proxy_auth, proxy_auth_regex or
	external with %LOGIN used in the format tag). The browser will be
	challenged for authentication on the first such acl encountered
	in http_access processing and will also be re-challenged for new
	login credentials if the request is being denied by a proxy_auth
	type acl.

	WARNING: authentication can't be used in a transparently intercepting
	proxy as the client then thinks it is talking to an origin server and
	not the proxy. This is a limitation of bending the TCP/IP protocol to
	transparently intercepting port 80, not a limitation in Squid.
	Ports flagged 'transparent', 'intercept', or 'tproxy' have
	authentication disabled.

	=== Parameters for the basic scheme follow. ===

	"program" cmdline
	Specify the command for the external authenticator.  Such a program
	reads a line containing "username password" and replies "OK" or
	"ERR" in an endless loop. "ERR" responses may optionally be followed
	by a error description available as %m in the returned error page.
	If you use an authenticator, make sure you have 1 acl of type
	proxy_auth.

	By default, the basic authentication scheme is not used unless a
	program is specified.

	If you want to use the traditional NCSA proxy authentication, set
	this line to something like

	auth_param basic program @DEFAULT_PREFIX@/libexec/ncsa_auth @DEFAULT_PREFIX@/etc/passwd

	"utf8" on|off
	HTTP uses iso-latin-1 as characterset, while some authentication
	backends such as LDAP expects UTF-8. If this is set to on Squid will
	translate the HTTP iso-latin-1 charset to UTF-8 before sending the
	username & password to the helper.

	"children" numberofchildren [startup=N] [idle=N] [concurrency=N]
	The maximum number of authenticator processes to spawn. If you start too few
	Squid will have to wait for them to process a backlog of credential
	verifications, slowing it down. When password verifications are
	done via a (slow) network you are likely to need lots of
	authenticator processes.

	The startup= and idle= options permit some skew in the exact amount
	run. A minimum of startup=N will begin during startup and reconfigure.
	Squid will start more in groups of up to idle=N in an attempt to meet
	traffic needs and to keep idle=N free above those traffic needs up to
	the maximum.

	The concurrency= option sets the number of concurrent requests the
	helper can process.  The default of 0 is used for helpers who only
	supports one request at a time. Setting this to a number greater than
	0 changes the protocol used to include a channel number first on the
	request/response line, allowing multiple requests to be sent to the
	same helper in parallell without wating for the response.
	Must not be set unless it's known the helper supports this.

	auth_param basic children 20 startup=0 idle=1

	"realm" realmstring
	Specifies the realm name which is to be reported to the
	client for the basic proxy authentication scheme (part of
	the text the user will see when prompted their username and
	password). There is no default.
	auth_param basic realm Squid proxy-caching web server

	"credentialsttl" timetolive
	Specifies how long squid assumes an externally validated
	username:password pair is valid for - in other words how
	often the helper program is called for that user. Set this
	low to force revalidation with short lived passwords.  Note
	setting this high does not impact your susceptibility
	to replay attacks unless you are using an one-time password
	system (such as SecureID).  If you are using such a system,
	you will be vulnerable to replay attacks unless you also
	use the max_user_ip ACL in an http_access rule.

	"casesensitive" on|off
	Specifies if usernames are case sensitive. Most user databases are
	case insensitive allowing the same username to be spelled using both
	lower and upper case letters, but some are case sensitive. This
	makes a big difference for user_max_ip ACL processing and similar.
	auth_param basic casesensitive off

	=== Parameters for the digest scheme follow ===

	"program" cmdline
	Specify the command for the external authenticator.  Such
	a program reads a line containing "username":"realm" and
	replies with the appropriate H(A1) value hex encoded or
	ERR if the user (or his H(A1) hash) does not exists.
	See rfc 2616 for the definition of H(A1).
	"ERR" responses may optionally be followed by a error description
	available as %m in the returned error page.

	By default, the digest authentication scheme is not used unless a
	program is specified.

	If you want to use a digest authenticator, set this line to
	something like

	auth_param digest program @DEFAULT_PREFIX@/bin/digest_pw_auth @DEFAULT_PREFIX@/etc/digpass

	"utf8" on|off
	HTTP uses iso-latin-1 as characterset, while some authentication
	backends such as LDAP expects UTF-8. If this is set to on Squid will
	translate the HTTP iso-latin-1 charset to UTF-8 before sending the
	username & password to the helper.

	"children" numberofchildren [startup=N] [idle=N] [concurrency=N]
	The maximum number of authenticator processes to spawn (default 5).
	If you start too few Squid will have to wait for them to
	process a backlog of H(A1) calculations, slowing it down.
	When the H(A1) calculations are done via a (slow) network
	you are likely to need lots of authenticator processes.

	The startup= and idle= options permit some skew in the exact amount
	run. A minimum of startup=N will begin during startup and reconfigure.
	Squid will start more in groups of up to idle=N in an attempt to meet
	traffic needs and to keep idle=N free above those traffic needs up to
	the maximum.

	The concurrency= option sets the number of concurrent requests the
	helper can process.  The default of 0 is used for helpers who only
	supports one request at a time. Setting this to a number greater than
	0 changes the protocol used to include a channel number first on the
	request/response line, allowing multiple requests to be sent to the
	same helper in parallell without wating for the response.
	Must not be set unless it's known the helper supports this.

	auth_param digest children 20 startup=0 idle=1

	"realm" realmstring
	Specifies the realm name which is to be reported to the
	client for the digest proxy authentication scheme (part of
	the text the user will see when prompted their username and
	password). There is no default.
	auth_param digest realm Squid proxy-caching web server

	"nonce_garbage_interval" timeinterval
	Specifies the interval that nonces that have been issued
	to client_agent's are checked for validity.

	"nonce_max_duration" timeinterval
	Specifies the maximum length of time a given nonce will be
	valid for.

	"nonce_max_count" number
	Specifies the maximum number of times a given nonce can be
	used.

	"nonce_strictness" on|off
	Determines if squid requires strict increment-by-1 behavior
	for nonce counts, or just incrementing (off - for use when
	useragents generate nonce counts that occasionally miss 1
	(ie, 1,2,4,6)). Default off.

	"check_nonce_count" on|off
	This directive if set to off can disable the nonce count check
	completely to work around buggy digest qop implementations in
	certain mainstream browser versions. Default on to check the
	nonce count to protect from authentication replay attacks.

	"post_workaround" on|off
	This is a workaround to certain buggy browsers who sends
	an incorrect request digest in POST requests when reusing
	the same nonce as acquired earlier on a GET request.

	=== NTLM scheme options follow ===

	"program" cmdline
	Specify the command for the external NTLM authenticator.
	Such a program reads exchanged NTLMSSP packets with
	the browser via Squid until authentication is completed.
	If you use an NTLM authenticator, make sure you have 1 acl
	of type proxy_auth.  By default, the NTLM authenticator_program
	is not used.

	auth_param ntlm program @DEFAULT_PREFIX@/bin/ntlm_auth

	"children" numberofchildren [startup=N] [idle=N]
	The maximum number of authenticator processes to spawn (default 5).
	If you start too few Squid will have to wait for them to
	process a backlog of credential verifications, slowing it
	down. When credential verifications are done via a (slow)
	network you are likely to need lots of authenticator
	processes.

	The startup= and idle= options permit some skew in the exact amount
	run. A minimum of startup=N will begin during startup and reconfigure.
	Squid will start more in groups of up to idle=N in an attempt to meet
	traffic needs and to keep idle=N free above those traffic needs up to
	the maximum.

	auth_param ntlm children 20 startup=0 idle=1

	"keep_alive" on|off
	If you experience problems with PUT/POST requests when using the
	Negotiate authentication scheme then you can try setting this to
	off. This will cause Squid to forcibly close the connection on
	the initial requests where the browser asks which schemes are
	supported by the proxy.

	auth_param ntlm keep_alive on

	=== Options for configuring the NEGOTIATE auth-scheme follow ===

	"program" cmdline
	Specify the command for the external Negotiate authenticator.
	This protocol is used in Microsoft Active-Directory enabled setups with
	the Microsoft Internet Explorer or Mozilla Firefox browsers.
	Its main purpose is to exchange credentials with the Squid proxy
	using the Kerberos mechanisms.
	If you use a Negotiate authenticator, make sure you have at least
	one acl of type proxy_auth active. By default, the negotiate
	authenticator_program is not used.
	The only supported program for this role is the ntlm_auth
	program distributed as part of Samba, version 4 or later.

	auth_param negotiate program @DEFAULT_PREFIX@/bin/ntlm_auth --helper-protocol=gss-spnego

	"children" numberofchildren [startup=N] [idle=N]
	The maximum number of authenticator processes to spawn (default 5).
	If you start too few Squid will have to wait for them to
	process a backlog of credential verifications, slowing it
	down. When crendential verifications are done via a (slow)
	network you are likely to need lots of authenticator
	processes.

	The startup= and idle= options permit some skew in the exact amount
	run. A minimum of startup=N will begin during startup and reconfigure.
	Squid will start more in groups of up to idle=N in an attempt to meet
	traffic needs and to keep idle=N free above those traffic needs up to
	the maximum.

	auth_param negotiate children 20 startup=0 idle=1

	"keep_alive" on|off
	If you experience problems with PUT/POST requests when using the
	Negotiate authentication scheme then you can try setting this to
	off. This will cause Squid to forcibly close the connection on
	the initial requests where the browser asks which schemes are
	supported by the proxy.

	auth_param negotiate keep_alive on

	
	Examples:

#Recommended minimum configuration per scheme:
#auth_param negotiate program <uncomment and complete this line to activate>
#auth_param negotiate children 20 startup=0 idle=1
#auth_param negotiate keep_alive on
#
#auth_param ntlm program <uncomment and complete this line to activate>
#auth_param ntlm children 20 startup=0 idle=1
#auth_param ntlm keep_alive on
#
#auth_param digest program <uncomment and complete this line>
#auth_param digest children 20 startup=0 idle=1
#auth_param digest realm Squid proxy-caching web server
#auth_param digest nonce_garbage_interval 5 minutes
#auth_param digest nonce_max_duration 30 minutes
#auth_param digest nonce_max_count 50
#
#auth_param basic program <uncomment and complete this line>
#auth_param basic children 5 startup=5 idle=1
#auth_param basic realm Squid proxy-caching web server
#auth_param basic credentialsttl 2 hours
DOC_END

NAME: authenticate_cache_garbage_interval
TYPE: time_t
DEFAULT: 1 hour
LOC: Config.authenticateGCInterval
DOC_START
	The time period between garbage collection across the username cache.
	This is a tradeoff between memory utilization (long intervals - say
	2 days) and CPU (short intervals - say 1 minute). Only change if you
	have good reason to.
DOC_END

NAME: authenticate_ttl
TYPE: time_t
DEFAULT: 1 hour
LOC: Config.authenticateTTL
DOC_START
	The time a user & their credentials stay in the logged in
	user cache since their last request. When the garbage
	interval passes, all user credentials that have passed their
	TTL are removed from memory.
DOC_END

NAME: authenticate_ip_ttl
TYPE: time_t
LOC: Config.authenticateIpTTL
DEFAULT: 0 seconds
DOC_START
	If you use proxy authentication and the 'max_user_ip' ACL,
	this directive controls how long Squid remembers the IP
	addresses associated with each user.  Use a small value
	(e.g., 60 seconds) if your users might change addresses
	quickly, as is the case with dialups.   You might be safe
	using a larger value (e.g., 2 hours) in a corporate LAN
	environment with relatively static address assignments.
DOC_END

COMMENT_START
 ACCESS CONTROLS
 -----------------------------------------------------------------------------
COMMENT_END

NAME: external_acl_type
TYPE: externalAclHelper
LOC: Config.externalAclHelperList
DEFAULT: none
DOC_START
	This option defines external acl classes using a helper program
	to look up the status

	  external_acl_type name [options] FORMAT.. /path/to/helper [helper arguments..]

	Options:

	  ttl=n		TTL in seconds for cached results (defaults to 3600
	  		for 1 hour)
	  negative_ttl=n
	  		TTL for cached negative lookups (default same
	  		as ttl)
	  children-max=n
			Maximum number of acl helper processes spawned to service
			external acl lookups of this type. (default 20)
	  children-startup=n
			Minimum number of acl helper processes to spawn during
			startup and reconfigure to service external acl lookups
			of this type. (default 0)
	  children-idle=n
			Number of acl helper processes to keep ahead of traffic
			loads. Squid will spawn this many at once whenever load
			rises above the capabilities of existing processes.
			Up to the value of children-max. (default 1)
	  concurrency=n	concurrency level per process. Only used with helpers
			capable of processing more than one query at a time.
	  cache=n	limit the result cache size, default is unbounded.
	  grace=n	Percentage remaining of TTL where a refresh of a
			cached entry should be initiated without needing to
			wait for a new reply. (default is for no grace period)
	  protocol=2.5	Compatibility mode for Squid-2.5 external acl helpers
	  ipv4 / ipv6	IP-mode used to communicate to this helper.
			For compatability with older configurations and helpers
			the default is currently 'ipv4'.

	FORMAT specifications

	  %LOGIN	Authenticated user login name
	  %EXT_USER	Username from previous external acl
	  %EXT_LOG	Log details from previous external acl
	  %EXT_TAG	Tag from previous external acl
	  %IDENT	Ident user name
	  %SRC		Client IP
	  %SRCPORT	Client source port
	  %URI		Requested URI
	  %DST		Requested host
	  %PROTO	Requested protocol
	  %PORT		Requested port
	  %PATH		Requested URL path
	  %METHOD	Request method
	  %MYADDR	Squid interface address
	  %MYPORT	Squid http_port number
	  %PATH		Requested URL-path (including query-string if any)
	  %USER_CERT	SSL User certificate in PEM format
	  %USER_CERTCHAIN SSL User certificate chain in PEM format
	  %USER_CERT_xx	SSL User certificate subject attribute xx
	  %USER_CA_xx	SSL User certificate issuer attribute xx

	  %>{Header}	HTTP request header "Header"
	  %>{Hdr:member}
	  		HTTP request header "Hdr" list member "member"
	  %>{Hdr:;member}
	  		HTTP request header list member using ; as
	  		list separator. ; can be any non-alphanumeric
			character.

	  %<{Header}	HTTP reply header "Header"
	  %<{Hdr:member}
	  		HTTP reply header "Hdr" list member "member"
	  %<{Hdr:;member}
	  		HTTP reply header list member using ; as
	  		list separator. ; can be any non-alphanumeric
			character.

	In addition to the above, any string specified in the referencing
	acl will also be included in the helper request line, after the
	specified formats (see the "acl external" directive)

	The helper receives lines per the above format specification,
	and returns lines starting with OK or ERR indicating the validity
	of the request and optionally followed by additional keywords with
	more details.

	General result syntax:

	  OK/ERR keyword=value ...

	Defined keywords:

	  user=		The users name (login)
	  password=	The users password (for login= cache_peer option)
	  message=	Message describing the reason. Available as %o
	  		in error pages
	  tag=		Apply a tag to a request (for both ERR and OK results)
	  		Only sets a tag, does not alter existing tags.
	  log=		String to be logged in access.log. Available as
	  		%ea in logformat specifications

	If protocol=3.0 (the default) then URL escaping is used to protect
	each value in both requests and responses.

	If using protocol=2.5 then all values need to be enclosed in quotes
	if they may contain whitespace, or the whitespace escaped using \.
	And quotes or \ characters within the keyword value must be \ escaped.

	When using the concurrency= option the protocol is changed by
	introducing a query channel tag infront of the request/response.
	The query channel tag is a number between 0 and concurrency-1.
DOC_END

NAME: acl
TYPE: acl
LOC: Config.aclList
DEFAULT: all src all
DOC_START
	Defining an Access List

	Every access list definition must begin with an aclname and acltype, 
	followed by either type-specific arguments or a quoted filename that
	they are read from.

	   acl aclname acltype argument ...
	   acl aclname acltype "file" ...

	When using "file", the file should contain one item per line.

	By default, regular expressions are CASE-SENSITIVE.
	To make them case-insensitive, use the -i option. To return case-sensitive
	use the +i option between patterns, or make a new ACL line without -i.

	Some acl types require suspending the current request in order
	to access some external data source.
	Those which do are marked with the tag [slow], those which
	don't are marked as [fast].
	See http://wiki.squid-cache.org/SquidFaq/SquidAcl
	for further information

	***** ACL TYPES AVAILABLE *****

	acl aclname src ip-address/netmask ...	# clients IP address [fast]
	acl aclname src addr1-addr2/netmask ...	# range of addresses [fast]
	acl aclname dst ip-address/netmask ...	# URL host's IP address [slow]
	acl aclname myip ip-address/netmask ...	# local socket IP address [fast]

	acl aclname arp      mac-address ... (xx:xx:xx:xx:xx:xx notation)
	  # The arp ACL requires the special configure option --enable-arp-acl.
	  # Furthermore, the ARP ACL code is not portable to all operating systems.
	  # It works on Linux, Solaris, Windows, FreeBSD, and some
	  # other *BSD variants.
	  # [fast]
	  #
	  # NOTE: Squid can only determine the MAC address for clients that are on
	  # the same subnet. If the client is on a different subnet,
	  # then Squid cannot find out its MAC address.

	acl aclname srcdomain   .foo.com ...
	  # reverse lookup, from client IP [slow]
	acl aclname dstdomain   .foo.com ...
	  # Destination server from URL [fast]
	acl aclname srcdom_regex [-i] \.foo\.com ...
	  # regex matching client name [slow]
	acl aclname dstdom_regex [-i] \.foo\.com ...
	  # regex matching server [fast]
	  #
	  # For dstdomain and dstdom_regex a reverse lookup is tried if a IP
	  # based URL is used and no match is found. The name "none" is used
	  # if the reverse lookup fails.

	acl aclname src_as number ...
	acl aclname dst_as number ...
	  # [fast]
	  # Except for access control, AS numbers can be used for
	  # routing of requests to specific caches. Here's an
	  # example for routing all requests for AS#1241 and only
	  # those to mycache.mydomain.net:
	  # acl asexample dst_as 1241
	  # cache_peer_access mycache.mydomain.net allow asexample
	  # cache_peer_access mycache_mydomain.net deny all

	acl aclname peername myPeer ...
	  # [fast]
	  # match against a named cache_peer entry
	  # set unique name= on cache_peer lines for reliable use.

	acl aclname time [day-abbrevs] [h1:m1-h2:m2]
	  # [fast]
	  #  day-abbrevs:
	  #	S - Sunday
	  #	M - Monday
	  #	T - Tuesday
	  #	W - Wednesday
	  #	H - Thursday
	  #	F - Friday
	  #	A - Saturday
	  #  h1:m1 must be less than h2:m2

	acl aclname url_regex [-i] ^http:// ...
	  # regex matching on whole URL [fast]
	acl aclname urlpath_regex [-i] \.gif$ ...
	  # regex matching on URL path [fast]

	acl aclname port 80 70 21 0-1024...   # destination TCP port [fast]
	                                      # ranges are alloed
	acl aclname myport 3128 ...	          # local socket TCP port [fast]
	acl aclname myportname 3128 ...       # http(s)_port name [fast]

	acl aclname proto HTTP FTP ...        # request protocol [fast]
 
	acl aclname method GET POST ...       # HTTP request method [fast]

	acl aclname http_status 200 301 500- 400-403 ... 
	  # status code in reply [fast]

	acl aclname browser [-i] regexp ...
	  # pattern match on User-Agent header (see also req_header below) [fast]

	acl aclname referer_regex [-i] regexp ...
	  # pattern match on Referer header [fast]
	  # Referer is highly unreliable, so use with care

	acl aclname ident username ...
	acl aclname ident_regex [-i] pattern ...
	  # string match on ident output [slow]
	  # use REQUIRED to accept any non-null ident.

	acl aclname proxy_auth [-i] username ...
	acl aclname proxy_auth_regex [-i] pattern ...
	  # perform http authentication challenge to the client and match against
	  # supplied credentials [slow]
	  #
	  # takes a list of allowed usernames.
	  # use REQUIRED to accept any valid username.
	  #
	  # Will use proxy authentication in forward-proxy scenarios, and plain
	  # http authenticaiton in reverse-proxy scenarios
	  #
	  # NOTE: when a Proxy-Authentication header is sent but it is not
	  # needed during ACL checking the username is NOT logged
	  # in access.log.
	  #
	  # NOTE: proxy_auth requires a EXTERNAL authentication program
	  # to check username/password combinations (see
	  # auth_param directive).
	  #
	  # NOTE: proxy_auth can't be used in a transparent/intercepting proxy
	  # as the browser needs to be configured for using a proxy in order
	  # to respond to proxy authentication.

	acl aclname snmp_community string ...
	  # A community string to limit access to your SNMP Agent [fast]
	  # Example:
	  #
	  #	acl snmppublic snmp_community public

	acl aclname maxconn number
	  # This will be matched when the client's IP address has
	  # more than <number> TCP connections established. [fast]
	  # NOTE: This only measures direct TCP links so X-Forwarded-For
	  # indirect clients are not counted.

	acl aclname max_user_ip [-s] number
	  # This will be matched when the user attempts to log in from more
	  # than <number> different ip addresses. The authenticate_ip_ttl
	  # parameter controls the timeout on the ip entries. [fast]
	  # If -s is specified the limit is strict, denying browsing
	  # from any further IP addresses until the ttl has expired. Without
	  # -s Squid will just annoy the user by "randomly" denying requests.
	  # (the counter is reset each time the limit is reached and a
	  # request is denied)
	  # NOTE: in acceleration mode or where there is mesh of child proxies,
	  # clients may appear to come from multiple addresses if they are
	  # going through proxy farms, so a limit of 1 may cause user problems.

	acl aclname random probability
	  # Pseudo-randomly match requests. Based on the probability given.
	  # Probability may be written as a decimal (0.333), fraction (1/3)
	  # or ratio of matches:non-matches (3:5).

	acl aclname req_mime_type [-i] mime-type ...
	  # regex match against the mime type of the request generated
	  # by the client. Can be used to detect file upload or some
	  # types HTTP tunneling requests [fast]
	  # NOTE: This does NOT match the reply. You cannot use this
	  # to match the returned file type.

	acl aclname req_header header-name [-i] any\.regex\.here
	  # regex match against any of the known request headers.  May be
	  # thought of as a superset of "browser", "referer" and "mime-type"
	  # ACL [fast]

	acl aclname rep_mime_type [-i] mime-type ...
	  # regex match against the mime type of the reply received by
	  # squid. Can be used to detect file download or some
	  # types HTTP tunneling requests. [fast]
	  # NOTE: This has no effect in http_access rules. It only has
	  # effect in rules that affect the reply data stream such as
	  # http_reply_access.

	acl aclname rep_header header-name [-i] any\.regex\.here
	  # regex match against any of the known reply headers. May be
	  # thought of as a superset of "browser", "referer" and "mime-type"
	  # ACLs [fast]

	acl aclname external class_name [arguments...]
	  # external ACL lookup via a helper class defined by the
	  # external_acl_type directive [slow]

	acl aclname user_cert attribute values...
	  # match against attributes in a user SSL certificate
	  # attribute is one of DN/C/O/CN/L/ST [fast]

	acl aclname ca_cert attribute values...
	  # match against attributes a users issuing CA SSL certificate
	  # attribute is one of DN/C/O/CN/L/ST [fast]

	acl aclname ext_user username ...
	acl aclname ext_user_regex [-i] pattern ...
	  # string match on username returned by external acl helper [slow]
	  # use REQUIRED to accept any non-null user name.

	acl aclname tag tagvalue ...
	  # string match on tag returned by external acl helper [slow]

	acl aclname hier_code codename ...
	  # string match against squid hierarchy code(s); [fast]
	  #  e.g., DIRECT, PARENT_HIT, NONE, etc.
	  #
	  # NOTE: This has no effect in http_access rules. It only has
	  # effect in rules that affect the reply data stream such as
	  # http_reply_access.

	Examples:
		acl macaddress arp 09:00:2b:23:45:67
		acl myexample dst_as 1241
		acl password proxy_auth REQUIRED
		acl fileupload req_mime_type -i ^multipart/form-data$
		acl javascript rep_mime_type -i ^application/x-javascript$

NOCOMMENT_START
#
# Recommended minimum configuration:
#
acl manager proto cache_object
acl localhost src 127.0.0.1/32 ::1
acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1

# Example rule allowing access from your local networks.
# Adapt to list your (internal) IP networks from where browsing
# should be allowed
acl localnet src 10.0.0.0/8	# RFC1918 possible internal network
acl localnet src 172.16.0.0/12	# RFC1918 possible internal network
acl localnet src 192.168.0.0/16	# RFC1918 possible internal network
acl localnet src fc00::/7       # RFC 4193 local private network range
acl localnet src fe80::/10      # RFC 4291 link-local (directly plugged) machines

acl SSL_ports port 443
acl Safe_ports port 80		# http
acl Safe_ports port 21		# ftp
acl Safe_ports port 443		# https
acl Safe_ports port 70		# gopher
acl Safe_ports port 210		# wais
acl Safe_ports port 1025-65535	# unregistered ports
acl Safe_ports port 280		# http-mgmt
acl Safe_ports port 488		# gss-http
acl Safe_ports port 591		# filemaker
acl Safe_ports port 777		# multiling http
acl CONNECT method CONNECT
NOCOMMENT_END
DOC_END

NAME: follow_x_forwarded_for
TYPE: acl_access
IFDEF: FOLLOW_X_FORWARDED_FOR
LOC: Config.accessList.followXFF
DEFAULT_IF_NONE: deny all
DOC_START
	Allowing or Denying the X-Forwarded-For header to be followed to
	find the original source of a request.

	Requests may pass through a chain of several other proxies
	before reaching us.  The X-Forwarded-For header will contain a
	comma-separated list of the IP addresses in the chain, with the
	rightmost address being the most recent.

	If a request reaches us from a source that is allowed by this
	configuration item, then we consult the X-Forwarded-For header
	to see where that host received the request from.  If the
	X-Forwarded-For header contains multiple addresses, we continue
	backtracking until we reach an address for which we are not allowed
	to follow the X-Forwarded-For header, or until we reach the first
	address in the list. For the purpose of ACL used in the
	follow_x_forwarded_for directive the src ACL type always matches
	the address we are testing and srcdomain matches its rDNS.

	The end result of this process is an IP address that we will
	refer to as the indirect client address.  This address may
	be treated as the client address for access control, ICAP, delay
	pools and logging, depending on the acl_uses_indirect_client,
	icap_uses_indirect_client, delay_pool_uses_indirect_client, 
	log_uses_indirect_client and tproxy_uses_indirect_client options.

	This clause only supports fast acl types.
	See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.

	SECURITY CONSIDERATIONS:

		Any host for which we follow the X-Forwarded-For header
		can place incorrect information in the header, and Squid
		will use the incorrect information as if it were the
		source address of the request.  This may enable remote
		hosts to bypass any access control restrictions that are
		based on the client's source addresses.

	For example:

		acl localhost src 127.0.0.1
		acl my_other_proxy srcdomain .proxy.example.com
		follow_x_forwarded_for allow localhost
		follow_x_forwarded_for allow my_other_proxy
DOC_END

NAME: acl_uses_indirect_client
COMMENT: on|off
TYPE: onoff
IFDEF: FOLLOW_X_FORWARDED_FOR
DEFAULT: on
LOC: Config.onoff.acl_uses_indirect_client
DOC_START
	Controls whether the indirect client address
	(see follow_x_forwarded_for) is used instead of the
	direct client address in acl matching.

	NOTE: maxconn ACL considers direct TCP links and indirect
	      clients will always have zero. So no match.
DOC_END

NAME: delay_pool_uses_indirect_client
COMMENT: on|off
TYPE: onoff
IFDEF: FOLLOW_X_FORWARDED_FOR&&USE_DELAY_POOLS
DEFAULT: on
LOC: Config.onoff.delay_pool_uses_indirect_client
DOC_START
	Controls whether the indirect client address
	(see follow_x_forwarded_for) is used instead of the
	direct client address in delay pools.
DOC_END

NAME: log_uses_indirect_client
COMMENT: on|off
TYPE: onoff
IFDEF: FOLLOW_X_FORWARDED_FOR
DEFAULT: on
LOC: Config.onoff.log_uses_indirect_client
DOC_START
	Controls whether the indirect client address
	(see follow_x_forwarded_for) is used instead of the
	direct client address in the access log.
DOC_END

NAME: tproxy_uses_indirect_client
COMMENT: on|off
TYPE: onoff
IFDEF: FOLLOW_X_FORWARDED_FOR&&LINUX_NETFILTER
DEFAULT: off
LOC: Config.onoff.tproxy_uses_indirect_client
DOC_START
	Controls whether the indirect client address
	(see follow_x_forwarded_for) is used instead of the
	direct client address when spoofing the outgoing client.

	This has no effect on requests arriving in non-tproxy
	mode ports.

	SECURITY WARNING: Usage of this option is dangerous
	and should not be used trivially. Correct configuration
	of folow_x_forewarded_for with a limited set of trusted
	sources is required to prevent abuse of your proxy.
DOC_END

NAME: http_access
TYPE: acl_access
LOC: Config.accessList.http
DEFAULT_IF_NONE: deny all
DOC_START
	Allowing or Denying access based on defined access lists

	Access to the HTTP port:
	http_access allow|deny [!]aclname ...

	NOTE on default values:

	If there are no "access" lines present, the default is to deny
	the request.

	If none of the "access" lines cause a match, the default is the
	opposite of the last line in the list.  If the last line was
	deny, the default is allow.  Conversely, if the last line
	is allow, the default will be deny.  For these reasons, it is a
	good idea to have an "deny all" entry at the end of your access
	lists to avoid potential confusion.

	This clause supports both fast and slow acl types.
	See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.

NOCOMMENT_START

#
# Recommended minimum Access Permission configuration:
#
# Only allow cachemgr access from localhost
http_access allow manager localhost
http_access deny manager

# Deny requests to certain unsafe ports
http_access deny !Safe_ports

# Deny CONNECT to other than secure SSL ports
http_access deny CONNECT !SSL_ports

# We strongly recommend the following be uncommented to protect innocent
# web applications running on the proxy server who think the only
# one who can access services on "localhost" is a local user
#http_access deny to_localhost

#
# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
#

# Example rule allowing access from your local networks.
# Adapt localnet in the ACL section to list your (internal) IP networks
# from where browsing should be allowed
http_access allow localnet
http_access allow localhost

# And finally deny all other access to this proxy
http_access deny all
NOCOMMENT_END
DOC_END

NAME: adapted_http_access http_access2
TYPE: acl_access
LOC: Config.accessList.adapted_http
DEFAULT: none
DOC_START
	Allowing or Denying access based on defined access lists

	Essentially identical to http_access, but runs after redirectors
	and ICAP/eCAP adaptation. Allowing access control based on their
	output.

	If not set then only http_access is used.
DOC_END

NAME: http_reply_access
TYPE: acl_access
LOC: Config.accessList.reply
DEFAULT: none
DOC_START
	Allow replies to client requests. This is complementary to http_access.

	http_reply_access allow|deny [!] aclname ...

	NOTE: if there are no access lines present, the default is to allow
	all replies

	If none of the access lines cause a match the opposite of the
	last line will apply. Thus it is good practice to end the rules
	with an "allow all" or "deny all" entry.

	This clause supports both fast and slow acl types.
	See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
DOC_END

NAME: icp_access
TYPE: acl_access
LOC: Config.accessList.icp
DEFAULT_IF_NONE: deny all
DOC_START
	Allowing or Denying access to the ICP port based on defined
	access lists

	icp_access  allow|deny [!]aclname ...

	See http_access for details

	This clause only supports fast acl types.
	See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.

# Allow ICP queries from local networks only
#icp_access allow localnet
#icp_access deny all
DOC_END

NAME: htcp_access
IFDEF: USE_HTCP
TYPE: acl_access
LOC: Config.accessList.htcp
DEFAULT_IF_NONE: deny all
DOC_START
	Allowing or Denying access to the HTCP port based on defined
	access lists

	htcp_access  allow|deny [!]aclname ...

	See http_access for details

	NOTE: The default if no htcp_access lines are present is to
	deny all traffic. This default may cause problems with peers
	using the htcp option.

	This clause only supports fast acl types.
	See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.

# Allow HTCP queries from local networks only
#htcp_access allow localnet
#htcp_access deny all
DOC_END

NAME: htcp_clr_access
IFDEF: USE_HTCP
TYPE: acl_access
LOC: Config.accessList.htcp_clr
DEFAULT_IF_NONE: deny all
DOC_START
	Allowing or Denying access to purge content using HTCP based
	on defined access lists

	htcp_clr_access  allow|deny [!]aclname ...

	See http_access for details

	This clause only supports fast acl types.
	See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.

# Allow HTCP CLR requests from trusted peers
acl htcp_clr_peer src 172.16.1.2
htcp_clr_access allow htcp_clr_peer
DOC_END

NAME: miss_access
TYPE: acl_access
LOC: Config.accessList.miss
DEFAULT: allow all
DOC_START
	Use to force your neighbors to use you as a sibling instead of
	a parent.  For example:

		acl localclients src 172.16.0.0/16
		miss_access allow localclients
		miss_access deny  !localclients

	This means only your local clients are allowed to fetch
	MISSES and all other clients can only fetch HITS.

	By default, allow all clients who passed the http_access rules
	to fetch MISSES from us.

	This clause only supports fast acl types.
	See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
DOC_END

NAME: ident_lookup_access
TYPE: acl_access
IFDEF: USE_IDENT
DEFAULT_IF_NONE: deny all
LOC: Ident::TheConfig.identLookup
DOC_START
	A list of ACL elements which, if matched, cause an ident
	(RFC 931) lookup to be performed for this request.  For
	example, you might choose to always perform ident lookups
	for your main multi-user Unix boxes, but not for your Macs
	and PCs.  By default, ident lookups are not performed for
	any requests.

	To enable ident lookups for specific client addresses, you
	can follow this example:

	acl ident_aware_hosts src 198.168.1.0/24
	ident_lookup_access allow ident_aware_hosts
	ident_lookup_access deny all

	Only src type ACL checks are fully supported.  A srcdomain
	ACL might work at times, but it will not always provide
	the correct result.

	This clause only supports fast acl types.
	See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
DOC_END

NAME: reply_body_max_size
COMMENT: size [acl acl...]
TYPE: acl_b_size_t
DEFAULT: none
LOC: Config.ReplyBodySize
DOC_START
	This option specifies the maximum size of a reply body. It can be
	used to prevent users from downloading very large files, such as
	MP3's and movies. When the reply headers are received, the
	reply_body_max_size lines are processed, and the first line where
	all (if any) listed ACLs are true is used as the maximum body size
	for this reply.

	This size is checked twice. First when we get the reply headers,
	we check the content-length value.  If the content length value exists
	and is larger than the allowed size, the request is denied and the
	user receives an error message that says "the request or reply
	is too large." If there is no content-length, and the reply
	size exceeds this limit, the client's connection is just closed
	and they will receive a partial reply.

	WARNING: downstream caches probably can not detect a partial reply
	if there is no content-length header, so they will cache
	partial responses and give them out as hits.  You should NOT
	use this option if you have downstream caches.

	WARNING: A maximum size smaller than the size of squid's error messages
	will cause an infinite loop and crash squid. Ensure that the smallest
	non-zero value you use is greater that the maximum header size plus
	the size of your largest error page.

	If you set this parameter none (the default), there will be
	no limit imposed.

	Configuration Format is:
		reply_body_max_size SIZE UNITS [acl ...]
	ie.
		reply_body_max_size 10 MB

DOC_END

COMMENT_START
 NETWORK OPTIONS
 -----------------------------------------------------------------------------
COMMENT_END

NAME: http_port ascii_port
TYPE: http_port_list
DEFAULT: none
LOC: Config.Sockaddr.http
DOC_START
	Usage:	port [mode] [options]
		hostname:port [mode] [options]
		1.2.3.4:port [mode] [options]

	The socket addresses where Squid will listen for HTTP client
	requests.  You may specify multiple socket addresses.
	There are three forms: port alone, hostname with port, and
	IP address with port.  If you specify a hostname or IP
	address, Squid binds the socket to that specific
	address. Most likely, you do not need to bind to a specific
	address, so you can use the port number alone.

	If you are running Squid in accelerator mode, you
	probably want to listen on port 80 also, or instead.

	The -a command line option may be used to specify additional
	port(s) where Squid listens for proxy request. Such ports will
	be plain proxy ports with no options.

	You may specify multiple socket addresses on multiple lines.

	Modes:

	   intercept	Support for IP-Layer interception of
			outgoing requests without browser settings.
			NP: disables authentication and IPv6 on the port.

	   tproxy	Support Linux TPROXY for spoofing outgoing
			connections using the client IP address.
			NP: disables authentication and maybe IPv6 on the port.

	   accel	Accelerator mode. Also needs at least one of
			vhost / vport / defaultsite.

	   ssl-bump 	Intercept each CONNECT request matching ssl_bump ACL,
			establish secure connection with the client and with
			the server, decrypt HTTP messages as they pass through
			Squid, and treat them as unencrypted HTTP messages,
			becoming the man-in-the-middle.

			The ssl_bump option is required to fully enable
			the SslBump feature.

	Omitting the mode flag causes default forward proxy mode to be used.


	Accelerator Mode Options:

	   allow-direct	Allow direct forwarding in accelerator mode. Normally
			accelerated requests are denied direct forwarding as if
			never_direct was used.

	   defaultsite=domainname
			What to use for the Host: header if it is not present
			in a request. Determines what site (not origin server)
			accelerators should consider the default.
			Implies accel.

	   vhost	Using the Host header for virtual domain support.
			Also uses the port as specified in Host: header.

	   vport	IP based virtual host support. Using the http_port number
			in passed on Host: headers.

	   vport=NN	Uses the specified port number rather than the
			http_port number.

	   protocol=	Protocol to reconstruct accelerated requests with.
			Defaults to http://.

	   ignore-cc	Ignore request Cache-Control headers.

	   		Warning: This option violates HTTP specifications if
			used in non-accelerator setups.


	SSL Bump Mode Options:

	   cert=	Path to SSL certificate (PEM format).

	   key=		Path to SSL private key file (PEM format)
			if not specified, the certificate file is
			assumed to be a combined certificate and
			key file.

	   version=	The version of SSL/TLS supported
			    1	automatic (default)
			    2	SSLv2 only
			    3	SSLv3 only
			    4	TLSv1 only

	   cipher=	Colon separated list of supported ciphers.

	   options=	Various SSL engine options. The most important
			being:
			    NO_SSLv2  Disallow the use of SSLv2
			    NO_SSLv3  Disallow the use of SSLv3
			    NO_TLSv1  Disallow the use of TLSv1
			    SINGLE_DH_USE Always create a new key when using
				      temporary/ephemeral DH key exchanges
			See src/ssl_support.c or OpenSSL SSL_CTX_set_options
			documentation for a complete list of options.

	   clientca=	File containing the list of CAs to use when
			requesting a client certificate.

	   cafile=	File containing additional CA certificates to
			use when verifying client certificates. If unset
			clientca will be used.

	   capath=	Directory containing additional CA certificates
			and CRL lists to use when verifying client certificates.

	   crlfile=	File of additional CRL lists to use when verifying
			the client certificate, in addition to CRLs stored in
			the capath. Implies VERIFY_CRL flag below.

	   dhparams=	File containing DH parameters for temporary/ephemeral
			DH key exchanges.

	   sslflags=	Various flags modifying the use of SSL:
			    DELAYED_AUTH
				Don't request client certificates
				immediately, but wait until acl processing
				requires a certificate (not yet implemented).
			    NO_DEFAULT_CA
				Don't use the default CA lists built in
				to OpenSSL.
			    NO_SESSION_REUSE
				Don't allow for session reuse. Each connection
				will result in a new SSL session.
			    VERIFY_CRL
				Verify CRL lists when accepting client
				certificates.
			    VERIFY_CRL_ALL
				Verify CRL lists for all certificates in the
				client certificate chain.

	   sslcontext=	SSL session ID context identifier.

	   generate-host-certificates[=<on|off>]
			Dynamically create SSL server certificates for the
			destination hosts of bumped CONNECT requests.When 
			enabled, the cert and key options are used to sign
			generated certificates. Otherwise generated
			certificate will be selfsigned.
			If there is CA certificate life time of generated 
			certificate equals lifetime of CA certificate. If
			generated certificate is selfsigned lifetime is three 
			years.
			This option is enabled by default when SslBump is used.
			See the sslBump option above for more information.
			
	   dynamic_cert_mem_cache_size=SIZE
			Approximate total RAM size spent on cached generated
			certificates. If set to zero, caching is disabled. The
			default value is 4MB. An average XXX-bit certificate
			consumes about XXX bytes of RAM.

	Other Options:

	   connection-auth[=on|off]
	                use connection-auth=off to tell Squid to prevent 
	                forwarding Microsoft connection oriented authentication
			(NTLM, Negotiate and Kerberos)

	   disable-pmtu-discovery=
			Control Path-MTU discovery usage:
			    off		lets OS decide on what to do (default).
			    transparent	disable PMTU discovery when transparent
					support is enabled.
			    always	disable always PMTU discovery.

			In many setups of transparently intercepting proxies
			Path-MTU discovery can not work on traffic towards the
			clients. This is the case when the intercepting device
			does not fully track connections and fails to forward
			ICMP must fragment messages to the cache server. If you
			have such setup and experience that certain clients
			sporadically hang or never complete requests set
			disable-pmtu-discovery option to 'transparent'.

	   name=	Specifies a internal name for the port. Defaults to
			the port specification (port or addr:port)

	   tcpkeepalive[=idle,interval,timeout]
			Enable TCP keepalive probes of idle connections.
			In seconds; idle is the initial time before TCP starts
			probing the connection, interval how often to probe, and
			timeout the time before giving up.

	If you run Squid on a dual-homed machine with an internal
	and an external interface we recommend you to specify the
	internal address:port in http_port. This way Squid will only be
	visible on the internal address.

NOCOMMENT_START

# Squid normally listens to port 3128
http_port @DEFAULT_HTTP_PORT@
NOCOMMENT_END
DOC_END

NAME: https_port
IFDEF: USE_SSL
TYPE: https_port_list
DEFAULT: none
LOC: Config.Sockaddr.https
DOC_START
	Usage:  [ip:]port cert=certificate.pem [key=key.pem] [options...]

	The socket address where Squid will listen for HTTPS client
	requests.

	This is really only useful for situations where you are running
	squid in accelerator mode and you want to do the SSL work at the
	accelerator level.

	You may specify multiple socket addresses on multiple lines,
	each with their own SSL certificate and/or options.

	Options:

	   accel	Accelerator mode. Also needs at least one of
			defaultsite or vhost.

	   defaultsite=	The name of the https site presented on
	   		this port. Implies accel.

	   vhost	Accelerator mode using Host header for virtual
			domain support. Requires a wildcard certificate
			or other certificate valid for more than one domain.
			Implies accel.

	   protocol=	Protocol to reconstruct accelerated requests with.
			Defaults to https.

	   cert=	Path to SSL certificate (PEM format).

	   key=		Path to SSL private key file (PEM format)
			if not specified, the certificate file is
			assumed to be a combined certificate and
			key file.

	   version=	The version of SSL/TLS supported
			    1	automatic (default)
			    2	SSLv2 only
			    3	SSLv3 only
			    4	TLSv1 only

	   cipher=	Colon separated list of supported ciphers.

	   options=	Various SSL engine options. The most important
			being:
			    NO_SSLv2  Disallow the use of SSLv2
			    NO_SSLv3  Disallow the use of SSLv3
			    NO_TLSv1  Disallow the use of TLSv1
			    SINGLE_DH_USE Always create a new key when using
				      temporary/ephemeral DH key exchanges
			See src/ssl_support.c or OpenSSL SSL_CTX_set_options
			documentation for a complete list of options.

	   clientca=	File containing the list of CAs to use when
			requesting a client certificate.

	   cafile=	File containing additional CA certificates to
			use when verifying client certificates. If unset
			clientca will be used.

	   capath=	Directory containing additional CA certificates
			and CRL lists to use when verifying client certificates.

	   crlfile=	File of additional CRL lists to use when verifying
			the client certificate, in addition to CRLs stored in
			the capath. Implies VERIFY_CRL flag below.

	   dhparams=	File containing DH parameters for temporary/ephemeral
			DH key exchanges.

	   sslflags=	Various flags modifying the use of SSL:
			    DELAYED_AUTH
				Don't request client certificates
				immediately, but wait until acl processing
				requires a certificate (not yet implemented).
			    NO_DEFAULT_CA
				Don't use the default CA lists built in
				to OpenSSL.
			    NO_SESSION_REUSE
				Don't allow for session reuse. Each connection
				will result in a new SSL session.
			    VERIFY_CRL
				Verify CRL lists when accepting client
				certificates.
			    VERIFY_CRL_ALL
				Verify CRL lists for all certificates in the
				client certificate chain.

	   sslcontext=	SSL session ID context identifier.

	   vport	Accelerator with IP based virtual host support.

	   vport=NN	As above, but uses specified port number rather
			than the https_port number. Implies accel.

	   name=	Specifies a internal name for the port. Defaults to
			the port specification (port or addr:port)

DOC_END

NAME: tcp_outgoing_tos tcp_outgoing_ds tcp_outgoing_dscp
TYPE: acl_tos
DEFAULT: none
LOC: Ip::Qos::TheConfig.tosToServer
DOC_START
	Allows you to select a TOS/Diffserv value for packets outgoing
	on the server side, based on an ACL.

	tcp_outgoing_tos ds-field [!]aclname ...

	Example where normal_service_net uses the TOS value 0x00
	and good_service_net uses 0x20

	acl normal_service_net src 10.0.0.0/24
	acl good_service_net src 10.0.1.0/24
	tcp_outgoing_tos 0x00 normal_service_net
	tcp_outgoing_tos 0x20 good_service_net

	TOS/DSCP values really only have local significance - so you should
	know what you're specifying. For more information, see RFC2474,
	RFC2475, and RFC3260.

	The TOS/DSCP byte must be exactly that - a octet value  0 - 255, or
	"default" to use whatever default your host has. Note that in
	practice often only multiples of 4 is usable as the two rightmost bits
	have been redefined for use by ECN (RFC 3168 section 23.1).

	Processing proceeds in the order specified, and stops at first fully
	matching line.
DOC_END

NAME: clientside_tos
TYPE: acl_tos
DEFAULT: none
LOC: Ip::Qos::TheConfig.tosToClient
DOC_START
	Allows you to select a TOS/Diffserv value for packets being transmitted
	on the client-side, based on an ACL.

	clientside_tos ds-field [!]aclname ...

	Example where normal_service_net uses the TOS value 0x00
	and good_service_net uses 0x20

	acl normal_service_net src 10.0.0.0/24
	acl good_service_net src 10.0.1.0/24
	clientside_tos 0x00 normal_service_net
	clientside_tos 0x20 good_service_net

	Note: This feature is incompatible with qos_flows. Any TOS values set here
	will be overwritten by TOS values in qos_flows.
DOC_END

NAME: tcp_outgoing_mark
TYPE: acl_nfmark
IFDEF: SO_MARK&&USE_LIBCAP
DEFAULT: none
LOC: Ip::Qos::TheConfig.nfmarkToServer
DOC_START
	Allows you to apply a Netfilter mark value to outgoing packets
	on the server side, based on an ACL.

	tcp_outgoing_mark mark-value [!]aclname ...

	Example where normal_service_net uses the mark value 0x00
	and good_service_net uses 0x20

	acl normal_service_net src 10.0.0.0/24
	acl good_service_net src 10.0.1.0/24
	tcp_outgoing_mark 0x00 normal_service_net
	tcp_outgoing_mark 0x20 good_service_net
DOC_END

NAME: clientside_mark
TYPE: acl_nfmark
IFDEF: SO_MARK&&USE_LIBCAP
DEFAULT: none
LOC: Ip::Qos::TheConfig.nfmarkToClient
DOC_START
	Allows you to apply a Netfilter mark value to packets being transmitted
	on the client-side, based on an ACL.

	clientside_mark mark-value [!]aclname ...

	Example where normal_service_net uses the mark value 0x00
	and good_service_net uses 0x20

	acl normal_service_net src 10.0.0.0/24
	acl good_service_net src 10.0.1.0/24
	clientside_mark 0x00 normal_service_net
	clientside_mark 0x20 good_service_net

	Note: This feature is incompatible with qos_flows. Any mark values set here
	will be overwritten by mark values in qos_flows.
DOC_END

NAME: qos_flows
TYPE: QosConfig
IFDEF: USE_QOS_TOS
DEFAULT: none
LOC: Ip::Qos::TheConfig
DOC_START
	Allows you to select a TOS/DSCP value to mark outgoing
	connections with, based on where the reply was sourced.	For
	platforms using netfilter, allows you to set a netfilter mark
	value instead of, or in addition to, a TOS value.

	TOS values really only have local significance - so you should
	know what you're specifying. For more information, see RFC2474,
	RFC2475, and RFC3260.

	The TOS/DSCP byte must be exactly that - a octet value  0 - 255. Note that
	in practice often only multiples of 4 is usable as the two rightmost bits
	have been redefined for use by ECN (RFC 3168 section 23.1).

	Mark values can be any unsigned 32-bit integer value.

	This setting is configured by setting the following values:

	tos|mark                Whether to set TOS or netfilter mark values

	local-hit=0xFF		Value to mark local cache hits.

	sibling-hit=0xFF	Value to mark hits from sibling peers.

	parent-hit=0xFF		Value to mark hits from parent peers.

	miss=0xFF		Value to mark cache misses. Takes precedence
				over the preserve-miss feature (see below).

	The TOS variant of the following features are only possible on Linux
	and require your kernel to be patched with the TOS preserving ZPH
	patch, available from http://zph.bratcheda.org
	No patch is needed to preserve the netfilter mark, which will work
	with all variants of netfilter.

	disable-preserve-miss
		This option disables the preservation of the TOS or netfilter
		mark. By default, the existing TOS or netfilter mark value of
		the response coming from the remote server will be retained
		and masked with miss-mark.
		NOTE: in the case of a netfilter mark, the mark must be set on
		the connection (using the CONNMARK target) not on the packet
		(MARK target).

	miss-mask=0xFF
		Allows you to mask certain bits in the TOS or mark value
		received from the remote server, before copying the value to
		the TOS sent towards clients.
		Default for tos: 0xFF (TOS from server is not changed).
		Default for mark: 0xFFFFFFFF (mark from server is not changed).

	All of these features require the --enable-zph-qos compilation flag
	(enabled by default). Netfilter marking also requires the
	libnetfilter_conntrack libraries (--with-netfilter-conntrack) and
	libcap 2.09+ (--with-libcap).

DOC_END

NAME: tcp_outgoing_address
TYPE: acl_address
DEFAULT: none
LOC: Config.accessList.outgoing_address
DOC_START
	Allows you to map requests to different outgoing IP addresses
	based on the username or source address of the user making
	the request.

	tcp_outgoing_address ipaddr [[!]aclname] ...

	Example where requests from 10.0.0.0/24 will be forwarded
	with source address 10.1.0.1, 10.0.2.0/24 forwarded with
	source address 10.1.0.2 and the rest will be forwarded with
	source address 10.1.0.3.

	acl normal_service_net src 10.0.0.0/24
	acl good_service_net src 10.0.2.0/24
	tcp_outgoing_address 10.1.0.1 normal_service_net
	tcp_outgoing_address 10.1.0.2 good_service_net
	tcp_outgoing_address 10.1.0.3

	Processing proceeds in the order specified, and stops at first fully
	matching line.

	Note: The use of this directive using client dependent ACLs is
	incompatible with the use of server side persistent connections. To
	ensure correct results it is best to set server_persistent_connections
	to off when using this directive in such configurations.

	Note: The use of this directive to set a local IP on outgoing TCP links
	is incompatible with using TPROXY to set client IP out outbound TCP links.
	When needing to contact peers use the no-tproxy cache_peer option to
	re-enable normal forwarding such as this.

        IPv6 Magic:

	Squid is built with a capability of bridging the IPv4 and IPv6 
	internets.
	tcp_outgoing_address as exampled above breaks this bridging by forcing
	all outbound traffic through a certain IPv4 which may be on the wrong
	side of the IPv4/IPv6 boundary.

	To operate with tcp_outgoing_address and keep the bridging benefits
	an additional ACL needs to be used which ensures the IPv6-bound traffic
	is never forced or permitted out the IPv4 interface.

	# IPv6 destination test along with a dummy access control to perofrm the required DNS
	# This MUST be place before any ALLOW rules.
	acl to_ipv6 dst ipv6
	http_access deny ipv6 !all

	tcp_outgoing_address 2001:db8::c001 good_service_net to_ipv6
	tcp_outgoing_address 10.1.0.2 good_service_net !to_ipv6

	tcp_outgoing_address 2001:db8::beef normal_service_net to_ipv6
	tcp_outgoing_address 10.1.0.1 normal_service_net !to_ipv6

	tcp_outgoing_address 2001:db8::1 to_ipv6
	tcp_outgoing_address 10.1.0.3 !to_ipv6

	WARNING:
	  'dst ipv6' bases its selection assuming DIRECT access.
	  If peers are used the peername ACL are needed to select outgoing
	  address which can link to the peer.

	  'dst ipv6' is a slow ACL. It will only work here if 'dst' is used
	  previously in the http_access rules to locate the destination IP.
	  Some more magic may be needed for that:
	    http_access allow to_ipv6 !all
	  (meaning, allow if to IPv6 but not from anywhere ;)

DOC_END

COMMENT_START
 SSL OPTIONS
 -----------------------------------------------------------------------------
COMMENT_END

NAME: ssl_unclean_shutdown
IFDEF: USE_SSL
TYPE: onoff
DEFAULT: off
LOC: Config.SSL.unclean_shutdown
DOC_START
	Some browsers (especially MSIE) bugs out on SSL shutdown
	messages.
DOC_END

NAME: ssl_engine
IFDEF: USE_SSL
TYPE: string
LOC: Config.SSL.ssl_engine
DEFAULT: none
DOC_START
	The OpenSSL engine to use. You will need to set this if you
	would like to use hardware SSL acceleration for example.
DOC_END

NAME: sslproxy_client_certificate
IFDEF: USE_SSL
DEFAULT: none
LOC: Config.ssl_client.cert
TYPE: string
DOC_START
	Client SSL Certificate to use when proxying https:// URLs
DOC_END

NAME: sslproxy_client_key
IFDEF: USE_SSL
DEFAULT: none
LOC: Config.ssl_client.key
TYPE: string
DOC_START
	Client SSL Key to use when proxying https:// URLs
DOC_END

NAME: sslproxy_version
IFDEF: USE_SSL
DEFAULT: 1
LOC: Config.ssl_client.version
TYPE: int
DOC_START
	SSL version level to use when proxying https:// URLs
DOC_END

NAME: sslproxy_options
IFDEF: USE_SSL
DEFAULT: none
LOC: Config.ssl_client.options
TYPE: string
DOC_START
	SSL engine options to use when proxying https:// URLs
	
	The most important being:

		NO_SSLv2  Disallow the use of SSLv2
		NO_SSLv3  Disallow the use of SSLv3
		NO_TLSv1  Disallow the use of TLSv1
		SINGLE_DH_USE
			Always create a new key when using
			temporary/ephemeral DH key exchanges
	
	These options vary depending on your SSL engine.
	See the OpenSSL SSL_CTX_set_options documentation for a
	complete list of possible options.
DOC_END

NAME: sslproxy_cipher
IFDEF: USE_SSL
DEFAULT: none
LOC: Config.ssl_client.cipher
TYPE: string
DOC_START
	SSL cipher list to use when proxying https:// URLs

	Colon separated list of supported ciphers.
DOC_END

NAME: sslproxy_cafile
IFDEF: USE_SSL
DEFAULT: none
LOC: Config.ssl_client.cafile
TYPE: string
DOC_START
	file containing CA certificates to use when verifying server
	certificates while proxying https:// URLs
DOC_END

NAME: sslproxy_capath
IFDEF: USE_SSL
DEFAULT: none
LOC: Config.ssl_client.capath
TYPE: string
DOC_START
	directory containing CA certificates to use when verifying
	server certificates while proxying https:// URLs
DOC_END

NAME: ssl_bump
IFDEF: USE_SSL
TYPE: acl_access
LOC: Config.accessList.ssl_bump
DEFAULT: none
DOC_START
	This ACL controls which CONNECT requests to an http_port
	marked with an sslBump flag are actually "bumped". Please 
	see the sslBump flag of an http_port option for more details
	about decoding proxied SSL connections.

	By default, no requests are bumped.

	See also: http_port ssl-bump
   
	This clause supports both fast and slow acl types.
	See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.


	# Example: Bump all requests except those originating from localhost and 
	# those going to webax.com or example.com sites.

	acl localhost src 127.0.0.1/32
	acl broken_sites dstdomain .webax.com
	acl broken_sites dstdomain .example.com
	ssl_bump deny localhost
	ssl_bump deny broken_sites
	ssl_bump allow all
DOC_END

NAME: sslproxy_flags
IFDEF: USE_SSL
DEFAULT: none
LOC: Config.ssl_client.flags
TYPE: string
DOC_START
	Various flags modifying the use of SSL while proxying https:// URLs:
	    DONT_VERIFY_PEER	Accept certificates that fail verification.
				For refined control, see sslproxy_cert_error.
	    NO_DEFAULT_CA	Don't use the default CA list built in
				to OpenSSL.
DOC_END

NAME: sslproxy_cert_error
IFDEF: USE_SSL
DEFAULT: none
LOC: Config.ssl_client.cert_error
TYPE: acl_access
DOC_START
	Use this ACL to bypass server certificate validation errors.

	For example, the following lines will bypass all validation errors
	when talking to servers located at 172.16.0.0/16. All other
	validation errors will result in ERR_SECURE_CONNECT_FAIL error.

		acl BrokenServersAtTrustedIP dst 172.16.0.0/16
		sslproxy_cert_error allow BrokenServersAtTrustedIP
		sslproxy_cert_error deny all

	This clause only supports fast acl types.
	See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
	Using slow acl types may result in server crashes

	Without this option, all server certificate validation errors
	terminate the transaction. Bypassing validation errors is dangerous
	because an error usually implies that the server cannot be trusted and
	the connection may be insecure.

	See also: sslproxy_flags and DONT_VERIFY_PEER.

	Default setting:  sslproxy_cert_error deny all
DOC_END

NAME: sslpassword_program
IFDEF: USE_SSL
DEFAULT: none
LOC: Config.Program.ssl_password
TYPE: string
DOC_START
	Specify a program used for entering SSL key passphrases
	when using encrypted SSL certificate keys. If not specified
	keys must either be unencrypted, or Squid started with the -N
	option to allow it to query interactively for the passphrase.

	The key file name is given as argument to the program allowing
	selection of the right password if you have multiple encrypted
	keys.
DOC_END

COMMENT_START
 OPTIONS RELATING TO EXTERNAL SSL_CRTD 
 -----------------------------------------------------------------------------
COMMENT_END

NAME: sslcrtd_program
TYPE: eol 
IFDEF: USE_SSL_CRTD
DEFAULT: @DEFAULT_SSL_CRTD@ -s @DEFAULT_SSL_DB_DIR@ -M 4MB
LOC: Ssl::TheConfig.ssl_crtd
DOC_START
	Specify the location and options of the executable for ssl_crtd process.
	@DEFAULT_SSL_CRTD@ program requires -s and -M parameters
	For more information use:
		@DEFAULT_SSL_CRTD@ -h
DOC_END

NAME: sslcrtd_children
TYPE: HelperChildConfig
IFDEF: USE_SSL_CRTD
DEFAULT: 32 startup=5 idle=1
LOC: Ssl::TheConfig.ssl_crtdChildren
DOC_START
	The maximum number of processes spawn to service ssl server.
	The maximum this may be safely set to is 32.
	
	The startup= and idle= options allow some measure of skew in your
	tuning.
	
		startup=N
	
	Sets the minimum number of processes to spawn when Squid
	starts or reconfigures. When set to zero the first request will
	cause spawning of the first child process to handle it.
	
	Starting too few children temporary slows Squid under load while it
	tries to spawn enough additional processes to cope with traffic.
	
		idle=N
	
	Sets a minimum of how many processes Squid is to try and keep available
	at all times. When traffic begins to rise above what the existing
	processes can handle this many more will be spawned up to the maximum
	configured. A minimum setting of 1 is required.
	
	You must have at least one ssl_crtd process.
DOC_END

COMMENT_START
 OPTIONS WHICH AFFECT THE NEIGHBOR SELECTION ALGORITHM
 -----------------------------------------------------------------------------
COMMENT_END

NAME: cache_peer
TYPE: peer
DEFAULT: none
LOC: Config.peers
DOC_START
	To specify other caches in a hierarchy, use the format:
	
		cache_peer hostname type http-port icp-port [options]
	
	For example,
	
	#                                        proxy  icp
	#          hostname             type     port   port  options
	#          -------------------- -------- ----- -----  -----------
	cache_peer parent.foo.net       parent    3128  3130  default
	cache_peer sib1.foo.net         sibling   3128  3130  proxy-only
	cache_peer sib2.foo.net         sibling   3128  3130  proxy-only
	cache_peer example.com          parent    80       0  no-query default
	cache_peer cdn.example.com      sibling   3128     0  
	
	      type:	either 'parent', 'sibling', or 'multicast'.
	
	proxy-port:	The port number where the peer accept HTTP requests.
			For other Squid proxies this is usually 3128
			For web servers this is usually 80
	
	  icp-port:	Used for querying neighbor caches about objects.
			Set to 0 if the peer does not support ICP or HTCP.
			See ICP and HTCP options below for additional details.
	
	
	==== ICP OPTIONS ====
	
	You MUST also set icp_port and icp_access explicitly when using these options.
	The defaults will prevent peer traffic using ICP.
	
	
	no-query	Disable ICP queries to this neighbor.
	
	multicast-responder
			Indicates the named peer is a member of a multicast group.
			ICP queries will not be sent directly to the peer, but ICP
			replies will be accepted from it.
	
	closest-only	Indicates that, for ICP_OP_MISS replies, we'll only forward
			CLOSEST_PARENT_MISSes and never FIRST_PARENT_MISSes.
	
	background-ping
			To only send ICP queries to this neighbor infrequently.
			This is used to keep the neighbor round trip time updated
			and is usually used in conjunction with weighted-round-robin.
	
	
	==== HTCP OPTIONS ====
	
	You MUST also set htcp_port and htcp_access explicitly when using these options.
	The defaults will prevent peer traffic using HTCP.
	
	
	htcp		Send HTCP, instead of ICP, queries to the neighbor.
			You probably also want to set the "icp-port" to 4827
			instead of 3130. This directive accepts a comma separated
			list of options described below.
	
	htcp=oldsquid	Send HTCP to old Squid versions (2.5 or earlier).
	
	htcp=no-clr	Send HTCP to the neighbor but without
			sending any CLR requests.  This cannot be used with
			only-clr.
	
	htcp=only-clr	Send HTCP to the neighbor but ONLY CLR requests.
			This cannot be used with no-clr.
	
	htcp=no-purge-clr
			Send HTCP to the neighbor including CLRs but only when
			they do not result from PURGE requests.
	
	htcp=forward-clr
			Forward any HTCP CLR requests this proxy receives to the peer.
	
	
	==== PEER SELECTION METHODS ====
	
	The default peer selection method is ICP, with the first responding peer
	being used as source. These options can be used for better load balancing.
	
	
	default		This is a parent cache which can be used as a "last-resort"
			if a peer cannot be located by any of the peer-selection methods.
			If specified more than once, only the first is used.
	
	round-robin	Load-Balance parents which should be used in a round-robin
			fashion in the absence of any ICP queries.
			weight=N can be used to add bias.
	
	weighted-round-robin
			Load-Balance parents which should be used in a round-robin
			fashion with the frequency of each parent being based on the
			round trip time. Closer parents are used more often.
			Usually used for background-ping parents.
			weight=N can be used to add bias.
	
	carp		Load-Balance parents which should be used as a CARP array.
			The requests will be distributed among the parents based on the
			CARP load balancing hash function based on their weight.
	
	userhash	Load-balance parents based on the client proxy_auth or ident username.
	
	sourcehash	Load-balance parents based on the client source IP.

	multicast-siblings
			To be used only for cache peers of type "multicast".
			ALL members of this multicast group have "sibling"
			relationship with it, not "parent".  This is to a mulicast
			group when the requested object would be fetched only from
			a "parent" cache, anyway.  It's useful, e.g., when
			configuring a pool of redundant Squid proxies, being
			members of the same multicast group.
	
	
	==== PEER SELECTION OPTIONS ====
	
	weight=N	use to affect the selection of a peer during any weighted
			peer-selection mechanisms.
			The weight must be an integer; default is 1,
			larger weights are favored more.
			This option does not affect parent selection if a peering
			protocol is not in use.
	
	basetime=N	Specify a base amount to be subtracted from round trip
			times of parents.
			It is subtracted before division by weight in calculating
			which parent to fectch from. If the rtt is less than the
			base time the rtt is set to a minimal value.
	
	ttl=N		Specify a TTL to use when sending multicast ICP queries
			to this address.
			Only useful when sending to a multicast group.
			Because we don't accept ICP replies from random
			hosts, you must configure other group members as
			peers with the 'multicast-responder' option.
	
	no-delay	To prevent access to this neighbor from influencing the
			delay pools.
	
	digest-url=URL	Tell Squid to fetch the cache digest (if digests are
			enabled) for this host from the specified URL rather
			than the Squid default location.
	
	
	==== ACCELERATOR / REVERSE-PROXY OPTIONS ====
	
	originserver	Causes this parent to be contacted as an origin server.
			Meant to be used in accelerator setups when the peer
			is a web server.
	
	forceddomain=name
			Set the Host header of requests forwarded to this peer.
			Useful in accelerator setups where the server (peer)
			expects a certain domain name but clients may request
			others. ie example.com or www.example.com
	
	no-digest	Disable request of cache digests.
	
	no-netdb-exchange
			Disables requesting ICMP RTT database (NetDB).
	
	
	==== AUTHENTICATION OPTIONS ====
	
	login=user:password
			If this is a personal/workgroup proxy and your parent
			requires proxy authentication.
			
			Note: The string can include URL escapes (i.e. %20 for
			spaces). This also means % must be written as %%.
	
	login=PASSTHRU
			Send login details received from client to this peer.
			Both Proxy- and WWW-Authorization headers are passed
			without alteration to the peer.
			Authentication is not required by Squid for this to work.
			
			Note: This will pass any form of authentication but
			only Basic auth will work through a proxy unless the
			connection-auth options are also used.

	login=PASS	Send login details received from client to this peer.
			Authentication is not required by this option.
			
			If there are no client-provided authentication headers
			to pass on, but username and password are available
			from an external ACL user= and password= result tags
			they may be sent instead.
			
			Note: To combine this with proxy_auth both proxies must
			share the same user database as HTTP only allows for
			a single login (one for proxy, one for origin server).
			Also be warned this will expose your users proxy
			password to the peer. USE WITH CAUTION
	
	login=*:password
			Send the username to the upstream cache, but with a
			fixed password. This is meant to be used when the peer
			is in another administrative domain, but it is still
			needed to identify each user.
			The star can optionally be followed by some extra
			information which is added to the username. This can
			be used to identify this proxy to the peer, similar to
			the login=username:password option above.
	
	login=NEGOTIATE
			If this is a personal/workgroup proxy and your parent
			requires a secure proxy authentication.
			The first principal from the default keytab or defined by
			the environment variable KRB5_KTNAME will be used. 
	
	login=NEGOTIATE:principal_name
			If this is a personal/workgroup proxy and your parent
			requires a secure proxy authentication. 
			The principal principal_name from the default keytab or
			defined by the environment variable KRB5_KTNAME will be
			used.
	
	connection-auth=on|off
			Tell Squid that this peer does or not support Microsoft
			connection oriented authentication, and any such
			challenges received from there should be ignored.
			Default is auto to automatically determine the status
			of the peer.
	
	
	==== SSL / HTTPS / TLS OPTIONS ====
	
	ssl		Encrypt connections to this peer with SSL/TLS.
	
	sslcert=/path/to/ssl/certificate
			A client SSL certificate to use when connecting to
			this peer.
	
	sslkey=/path/to/ssl/key
			The private SSL key corresponding to sslcert above.
			If 'sslkey' is not specified 'sslcert' is assumed to
			reference a combined file containing both the
			certificate and the key.
	
	sslversion=1|2|3|4
			The SSL version to use when connecting to this peer
				1 = automatic (default)
				2 = SSL v2 only
				3 = SSL v3 only
				4 = TLS v1 only
	
	sslcipher=...	The list of valid SSL ciphers to use when connecting
			to this peer.
	
	ssloptions=... 	Specify various SSL engine options:
				NO_SSLv2  Disallow the use of SSLv2
				NO_SSLv3  Disallow the use of SSLv3
				NO_TLSv1  Disallow the use of TLSv1
			See src/ssl_support.c or the OpenSSL documentation for
			a more complete list.
	
	sslcafile=... 	A file containing additional CA certificates to use
			when verifying the peer certificate.
	
	sslcapath=...	A directory containing additional CA certificates to
			use when verifying the peer certificate.
	
	sslcrlfile=... 	A certificate revocation list file to use when
			verifying the peer certificate.
	
	sslflags=...	Specify various flags modifying the SSL implementation:
	
			DONT_VERIFY_PEER
				Accept certificates even if they fail to
				verify.
			NO_DEFAULT_CA
				Don't use the default CA list built in
				to OpenSSL.
			DONT_VERIFY_DOMAIN
				Don't verify the peer certificate
				matches the server name
	
	ssldomain= 	The peer name as advertised in it's certificate.
			Used for verifying the correctness of the received peer
			certificate. If not specified the peer hostname will be
			used.
	
	front-end-https
			Enable the "Front-End-Https: On" header needed when
			using Squid as a SSL frontend in front of Microsoft OWA.
			See MS KB document Q307347 for details on this header.
			If set to auto the header will only be added if the
			request is forwarded as a https:// URL.
	
	
	==== GENERAL OPTIONS ====
	
	connect-timeout=N
			A peer-specific connect timeout.
			Also see the peer_connect_timeout directive.
	
	connect-fail-limit=N
			How many times connecting to a peer must fail before
			it is marked as down. Default is 10.
	
	allow-miss	Disable Squid's use of only-if-cached when forwarding
			requests to siblings. This is primarily useful when
			icp_hit_stale is used by the sibling. To extensive use
			of this option may result in forwarding loops, and you
			should avoid having two-way peerings with this option.
			For example to deny peer usage on requests from peer
			by denying cache_peer_access if the source is a peer.
	
	max-conn=N	Limit the amount of connections Squid may open to this
			peer. see also 
	
	name=xxx	Unique name for the peer.
			Required if you have multiple peers on the same host
			but different ports.
			This name can be used in cache_peer_access and similar
			directives to dentify the peer.
			Can be used by outgoing access controls through the
			peername ACL type.
	
	no-tproxy	Do not use the client-spoof TPROXY support when forwarding
			requests to this peer. Use normal address selection instead.
	
	proxy-only	objects fetched from the peer will not be stored locally.
	
DOC_END

NAME: cache_peer_domain cache_host_domain
TYPE: hostdomain
DEFAULT: none
LOC: none
DOC_START
	Use to limit the domains for which a neighbor cache will be
	queried.  Usage:

	cache_peer_domain cache-host domain [domain ...]
	cache_peer_domain cache-host !domain

	For example, specifying

		cache_peer_domain parent.foo.net	.edu

	has the effect such that UDP query packets are sent to
	'bigserver' only when the requested object exists on a
	server in the .edu domain.  Prefixing the domainname
	with '!' means the cache will be queried for objects
	NOT in that domain.

	NOTE:	* Any number of domains may be given for a cache-host,
		  either on the same or separate lines.
		* When multiple domains are given for a particular
		  cache-host, the first matched domain is applied.
		* Cache hosts with no domain restrictions are queried
		  for all requests.
		* There are no defaults.
		* There is also a 'cache_peer_access' tag in the ACL
		  section.
DOC_END

NAME: cache_peer_access
TYPE: peer_access
DEFAULT: none
LOC: none
DOC_START
	Similar to 'cache_peer_domain' but provides more flexibility by
	using ACL elements.

	cache_peer_access cache-host allow|deny [!]aclname ...

	The syntax is identical to 'http_access' and the other lists of
	ACL elements.  See the comments for 'http_access' below, or
	the Squid FAQ (http://wiki.squid-cache.org/SquidFaq/SquidAcl).
DOC_END

NAME: neighbor_type_domain
TYPE: hostdomaintype
DEFAULT: none
LOC: none
DOC_START
	usage: neighbor_type_domain neighbor parent|sibling domain domain ...

	Modifying the neighbor type for specific domains is now
	possible.  You can treat some domains differently than the
	default neighbor type specified on the 'cache_peer' line.
	Normally it should only be necessary to list domains which
	should be treated differently because the default neighbor type
	applies for hostnames which do not match domains listed here.

EXAMPLE:
	cache_peer cache.foo.org parent 3128 3130
	neighbor_type_domain cache.foo.org sibling .com .net
	neighbor_type_domain cache.foo.org sibling .au .de
DOC_END

NAME: dead_peer_timeout
COMMENT: (seconds)
DEFAULT: 10 seconds
TYPE: time_t
LOC: Config.Timeout.deadPeer
DOC_START
	This controls how long Squid waits to declare a peer cache
	as "dead."  If there are no ICP replies received in this
	amount of time, Squid will declare the peer dead and not
	expect to receive any further ICP replies.  However, it
	continues to send ICP queries, and will mark the peer as
	alive upon receipt of the first subsequent ICP reply.

	This timeout also affects when Squid expects to receive ICP
	replies from peers.  If more than 'dead_peer' seconds have
	passed since the last ICP reply was received, Squid will not
	expect to receive an ICP reply on the next query.  Thus, if
	your time between requests is greater than this timeout, you
	will see a lot of requests sent DIRECT to origin servers
	instead of to your parents.
DOC_END

NAME: forward_max_tries
DEFAULT: 10
TYPE: int
LOC: Config.forward_max_tries
DOC_START
	Controls how many different forward paths Squid will try
	before giving up. See also forward_timeout.
DOC_END

NAME: hierarchy_stoplist
TYPE: wordlist
DEFAULT: none
LOC: Config.hierarchy_stoplist
DOC_START
	A list of words which, if found in a URL, cause the object to
	be handled directly by this cache.  In other words, use this
	to not query neighbor caches for certain objects.  You may
	list this option multiple times.
	Note: never_direct overrides this option.
NOCOMMENT_START

# We recommend you to use at least the following line.
hierarchy_stoplist cgi-bin ?
NOCOMMENT_END
DOC_END

COMMENT_START
 MEMORY CACHE OPTIONS
 -----------------------------------------------------------------------------
COMMENT_END

NAME: cache_mem
COMMENT: (bytes)
TYPE: b_size_t
DEFAULT: 256 MB
LOC: Config.memMaxSize
DOC_START
	NOTE: THIS PARAMETER DOES NOT SPECIFY THE MAXIMUM PROCESS SIZE.
	IT ONLY PLACES A LIMIT ON HOW MUCH ADDITIONAL MEMORY SQUID WILL
	USE AS A MEMORY CACHE OF OBJECTS. SQUID USES MEMORY FOR OTHER
	THINGS AS WELL. SEE THE SQUID FAQ SECTION 8 FOR DETAILS.

	'cache_mem' specifies the ideal amount of memory to be used
	for:
		* In-Transit objects
		* Hot Objects
		* Negative-Cached objects

	Data for these objects are stored in 4 KB blocks.  This
	parameter specifies the ideal upper limit on the total size of
	4 KB blocks allocated.  In-Transit objects take the highest
	priority.

	In-transit objects have priority over the others.  When
	additional space is needed for incoming data, negative-cached
	and hot objects will be released.  In other words, the
	negative-cached and hot objects will fill up any unused space
	not needed for in-transit objects.

	If circumstances require, this limit will be exceeded.
	Specifically, if your incoming request rate requires more than
	'cache_mem' of memory to hold in-transit objects, Squid will
	exceed this limit to satisfy the new requests.  When the load
	decreases, blocks will be freed until the high-water mark is
	reached.  Thereafter, blocks will be used to store hot
	objects.
DOC_END

NAME: maximum_object_size_in_memory
COMMENT: (bytes)
TYPE: b_size_t
DEFAULT: 512 KB
LOC: Config.Store.maxInMemObjSize
DOC_START
	Objects greater than this size will not be attempted to kept in
	the memory cache. This should be set high enough to keep objects
	accessed frequently in memory to improve performance whilst low
	enough to keep larger objects from hoarding cache_mem.
DOC_END

NAME: memory_cache_mode
TYPE: memcachemode
LOC: Config
DEFAULT: always
DOC_START
	Controls which objects to keep in the memory cache (cache_mem)

	always	Keep most recently fetched objects in memory (default)

	disk	Only disk cache hits are kept in memory, which means
		an object must first be cached on disk and then hit
		a second time before cached in memory.

	network	Only objects fetched from network is kept in memory
DOC_END

NAME: memory_replacement_policy
TYPE: removalpolicy
LOC: Config.memPolicy
DEFAULT: lru
DOC_START
	The memory replacement policy parameter determines which
	objects are purged from memory when memory space is needed.

	See cache_replacement_policy for details.
DOC_END

COMMENT_START
 DISK CACHE OPTIONS
 -----------------------------------------------------------------------------
COMMENT_END

NAME: cache_replacement_policy
TYPE: removalpolicy
LOC: Config.replPolicy
DEFAULT: lru
DOC_START
	The cache replacement policy parameter determines which
	objects are evicted (replaced) when disk space is needed.

	    lru       : Squid's original list based LRU policy
	    heap GDSF : Greedy-Dual Size Frequency
	    heap LFUDA: Least Frequently Used with Dynamic Aging
	    heap LRU  : LRU policy implemented using a heap

	Applies to any cache_dir lines listed below this.

	The LRU policies keeps recently referenced objects.

	The heap GDSF policy optimizes object hit rate by keeping smaller
	popular objects in cache so it has a better chance of getting a
	hit.  It achieves a lower byte hit rate than LFUDA though since
	it evicts larger (possibly popular) objects.

	The heap LFUDA policy keeps popular objects in cache regardless of
	their size and thus optimizes byte hit rate at the expense of
	hit rate since one large, popular object will prevent many
	smaller, slightly less popular objects from being cached.

	Both policies utilize a dynamic aging mechanism that prevents
	cache pollution that can otherwise occur with frequency-based
	replacement policies.

	NOTE: if using the LFUDA replacement policy you should increase
	the value of maximum_object_size above its default of 4096 KB to
	to maximize the potential byte hit rate improvement of LFUDA.

	For more information about the GDSF and LFUDA cache replacement
	policies see http://www.hpl.hp.com/techreports/1999/HPL-1999-69.html
	and http://fog.hpl.external.hp.com/techreports/98/HPL-98-173.html.
DOC_END

NAME: cache_dir
TYPE: cachedir
DEFAULT: none
LOC: Config.cacheSwap
DOC_START
	Usage:

	cache_dir Type Directory-Name Fs-specific-data [options]

	You can specify multiple cache_dir lines to spread the
	cache among different disk partitions.

	Type specifies the kind of storage system to use. Only "ufs"
	is built by default. To enable any of the other storage systems
	see the --enable-storeio configure option.

	'Directory' is a top-level directory where cache swap
	files will be stored.  If you want to use an entire disk
	for caching, this can be the mount-point directory.
	The directory must exist and be writable by the Squid
	process.  Squid will NOT create this directory for you.

	In SMP configurations, cache_dir must not precede the workers option
	and should use configuration macros or conditionals to give each
	worker interested in disk caching a dedicated cache directory.

	The ufs store type:

	"ufs" is the old well-known Squid storage format that has always
	been there.

	cache_dir ufs Directory-Name Mbytes L1 L2 [options]

	'Mbytes' is the amount of disk space (MB) to use under this
	directory.  The default is 100 MB.  Change this to suit your
	configuration.  Do NOT put the size of your disk drive here.
	Instead, if you want Squid to use the entire disk drive,
	subtract 20% and use that value.

	'L1' is the number of first-level subdirectories which
	will be created under the 'Directory'.  The default is 16.

	'L2' is the number of second-level subdirectories which
	will be created under each first-level directory.  The default
	is 256.

	The aufs store type:

	"aufs" uses the same storage format as "ufs", utilizing
	POSIX-threads to avoid blocking the main Squid process on
	disk-I/O. This was formerly known in Squid as async-io.

	cache_dir aufs Directory-Name Mbytes L1 L2 [options]

	see argument descriptions under ufs above

	The diskd store type:

	"diskd" uses the same storage format as "ufs", utilizing a
	separate process to avoid blocking the main Squid process on
	disk-I/O.

	cache_dir diskd Directory-Name Mbytes L1 L2 [options] [Q1=n] [Q2=n]

	see argument descriptions under ufs above

	Q1 specifies the number of unacknowledged I/O requests when Squid
	stops opening new files. If this many messages are in the queues,
	Squid won't open new files. Default is 64

	Q2 specifies the number of unacknowledged messages when Squid
	starts blocking.  If this many messages are in the queues,
	Squid blocks until it receives some replies. Default is 72

	When Q1 < Q2 (the default), the cache directory is optimized
	for lower response time at the expense of a decrease in hit
	ratio.  If Q1 > Q2, the cache directory is optimized for
	higher hit ratio at the expense of an increase in response
	time.

	The coss store type:

	NP: COSS filesystem in Squid-3 has been deemed too unstable for
	    production use and has thus been removed from this release.
	    We hope that it can be made usable again soon.

	block-size=n defines the "block size" for COSS cache_dir's.
	Squid uses file numbers as block numbers.  Since file numbers
	are limited to 24 bits, the block size determines the maximum
	size of the COSS partition.  The default is 512 bytes, which
	leads to a maximum cache_dir size of 512<<24, or 8 GB.  Note
	you should not change the coss block size after Squid
	has written some objects to the cache_dir.

	The coss file store has changed from 2.5. Now it uses a file
	called 'stripe' in the directory names in the config - and
	this will be created by squid -z.

	Common options:

	no-store, no new objects should be stored to this cache_dir

	min-size=n, refers to the min object size in bytes this cache_dir
	will accept.  It's used to restrict a cache_dir to only store
	large objects (e.g. aufs) while other storedirs are optimized
	for smaller objects (e.g. COSS). Defaults to 0.

	max-size=n, refers to the max object size in bytes this cache_dir
	supports.  It is used to select the cache_dir to store the object.
	Note: To make optimal use of the max-size limits you should order
	the cache_dir lines with the smallest max-size value first and the
	ones with no max-size specification last.

	Note for coss, max-size must be less than COSS_MEMBUF_SZ,
	which can be changed with the --with-coss-membuf-size=N configure
	option.
NOCOMMENT_START

# Uncomment and adjust the following to add a disk cache directory.
#cache_dir ufs @DEFAULT_SWAP_DIR@ 100 16 256
NOCOMMENT_END
DOC_END

NAME: store_dir_select_algorithm
TYPE: string
LOC: Config.store_dir_select_algorithm
DEFAULT: least-load
DOC_START
	Set this to 'round-robin' as an alternative.
DOC_END

NAME: max_open_disk_fds
TYPE: int
LOC: Config.max_open_disk_fds
DEFAULT: 0
DOC_START
	To avoid having disk as the I/O bottleneck Squid can optionally
	bypass the on-disk cache if more than this amount of disk file
	descriptors are open.

	A value of 0 indicates no limit.
DOC_END

NAME: minimum_object_size
COMMENT: (bytes)
TYPE: b_int64_t
DEFAULT: 0 KB
LOC: Config.Store.minObjectSize
DOC_START
	Objects smaller than this size will NOT be saved on disk.  The
	value is specified in kilobytes, and the default is 0 KB, which
	means there is no minimum.
DOC_END

NAME: maximum_object_size
COMMENT: (bytes)
TYPE: b_int64_t
DEFAULT: 4096 KB
LOC: Config.Store.maxObjectSize
DOC_START
	Objects larger than this size will NOT be saved on disk.  The
	value is specified in kilobytes, and the default is 4MB.  If
	you wish to get a high BYTES hit ratio, you should probably
	increase this (one 32 MB object hit counts for 3200 10KB
	hits).  If you wish to increase speed more than your want to
	save bandwidth you should leave this low.

	NOTE: if using the LFUDA replacement policy you should increase
	this value to maximize the byte hit rate improvement of LFUDA!
	See replacement_policy below for a discussion of this policy.
DOC_END

NAME: cache_swap_low
COMMENT: (percent, 0-100)
TYPE: int
DEFAULT: 90
LOC: Config.Swap.lowWaterMark
DOC_NONE

NAME: cache_swap_high
COMMENT: (percent, 0-100)
TYPE: int
DEFAULT: 95
LOC: Config.Swap.highWaterMark
DOC_START

	The low- and high-water marks for cache object replacement.
	Replacement begins when the swap (disk) usage is above the
	low-water mark and attempts to maintain utilization near the
	low-water mark.  As swap utilization gets close to high-water
	mark object eviction becomes more aggressive.  If utilization is
	close to the low-water mark less replacement is done each time.

	Defaults are 90% and 95%. If you have a large cache, 5% could be
	hundreds of MB. If this is the case you may wish to set these
	numbers closer together.
DOC_END

COMMENT_START
 LOGFILE OPTIONS
 -----------------------------------------------------------------------------
COMMENT_END

NAME: logformat
TYPE: logformat
LOC: Log::TheConfig
DEFAULT: none
DOC_START
	Usage:

	logformat <name> <format specification>

	Defines an access log format.

	The <format specification> is a string with embedded % format codes

	% format codes all follow the same basic structure where all but
	the formatcode is optional. Output strings are automatically escaped
	as required according to their context and the output format
	modifiers are usually not needed, but can be specified if an explicit
	output format is desired.

		% ["|[|'|#] [-] [[0]width] [{argument}] formatcode

		"	output in quoted string format
		[	output in squid text log format as used by log_mime_hdrs
		#	output in URL quoted format
		'	output as-is

		-	left aligned
		width	field width. If starting with 0 the
			output is zero padded
		{arg}	argument such as header name etc

	Format codes:

		%	a literal % character
		sn	Unique sequence number per log line entry
		err_code    The ID of an error response served by Squid or
				a similar internal error identifier.
		err_detail  Additional err_code-dependent error information.

	Connection related format codes:

		>a	Client source IP address
		>A	Client FQDN
		>p	Client source port
		>eui	Client EUI (MAC address, EUI-48 or EUI-64 identifier)
		<A	Server IP address or peer name
		la	Local IP address (http_port)
		lp	Local port number (http_port)
		<la	Local IP address of the last server or peer connection
		<lp     Local port number of the last server or peer connection

	Time related format codes:

		ts	Seconds since epoch
		tu	subsecond time (milliseconds)
		tl	Local time. Optional strftime format argument
				default %d/%b/%Y:%H:%M:%S %z
		tg	GMT time. Optional strftime format argument
				default %d/%b/%Y:%H:%M:%S %z
		tr	Response time (milliseconds)
		dt	Total time spent making DNS lookups (milliseconds)

	HTTP cache related format codes:

		[http::]>h	Original request header. Optional header name argument
				on the format header[:[separator]element]
		[http::]>ha	The HTTP request headers after adaptation and redirection. 
				Optional header name argument as for >h
		[http::]<h	Reply header. Optional header name argument
				as for >h
		[http::]un	User name
		[http::]ul	User name from authentication
		[http::]ui	User name from ident
		[http::]us	User name from SSL
		[http::]ue	User name from external acl helper
		[http::]>Hs	HTTP status code sent to the client
		[http::]<Hs	HTTP status code received from the next hop
		[http::]<bs	Number of HTTP-equivalent message body bytes 
				received from the next hop, excluding chunked
				transfer encoding and control messages.
				Generated FTP/Gopher listings are treated as
				received bodies.
		[http::]Ss	Squid request status (TCP_MISS etc)
		[http::]Sh	Squid hierarchy status (DEFAULT_PARENT etc)
		[http::]mt	MIME content type
		[http::]rm	Request method (GET/POST etc)
		[http::]ru	Request URL
		[http::]rp	Request URL-Path excluding hostname
		[http::]rv	Request protocol version
		[http::]et	Tag returned by external acl
		[http::]ea	Log string returned by external acl
		[http::]<st	Sent reply size including HTTP headers
		[http::]>st	Received request size including HTTP headers. In the
				case of chunked requests the chunked encoding metadata
				are not included
		[http::]>sh	Received HTTP request headers size
		[http::]<sh	Sent HTTP reply headers size
		[http::]st	Request+Reply size including HTTP headers
		[http::]<sH	Reply high offset sent
		[http::]<sS	Upstream object size
		[http::]<pt	Peer response time in milliseconds. The timer starts
				when the last request byte is sent to the next hop
				and stops when the last response byte is received.
		[http::]<tt	Total server-side time in milliseconds. The timer 
				starts with the first connect request (or write I/O)
				sent to the first selected peer. The timer stops
				with the last I/O with the last peer.

	If ICAP is enabled, the following code becomes available (as
	well as ICAP log codes documented with the icap_log option):

		icap::tt        Total ICAP processing time for the HTTP
				transaction. The timer ticks when ICAP
				ACLs are checked and when ICAP
				transaction is in progress.

	If adaptation is enabled the following three codes become available:

		adapt::<last_h	The header of the last ICAP response or
				meta-information from the last eCAP
				transaction related to the HTTP transaction.
				Like <h, accepts an optional header name
				argument.

		adapt::sum_trs Summed adaptation transaction response
				times recorded as a comma-separated list in
				the order of transaction start time. Each time
				value is recorded as an integer number,
				representing response time of one or more
				adaptation (ICAP or eCAP) transaction in
				milliseconds.  When a failed transaction is
				being retried or repeated, its time is not
				logged individually but added to the
				replacement (next) transaction. See also:
				adapt::all_trs.

		adapt::all_trs All adaptation transaction response times.
				Same as adaptation_strs but response times of
				individual transactions are never added
				together. Instead, all transaction response
				times are recorded individually.

	You can prefix adapt::*_trs format codes with adaptation
	service name in curly braces to record response time(s) specific
	to that service. For example: %{my_service}adapt::sum_trs

	The default formats available (which do not need re-defining) are:

logformat squid      %ts.%03tu %6tr %>a %Ss/%03>Hs %<st %rm %ru %un %Sh/%<A %mt
logformat common     %>a %ui %un [%tl] "%rm %ru HTTP/%rv" %>Hs %<st %Ss:%Sh
logformat combined   %>a %ui %un [%tl] "%rm %ru HTTP/%rv" %>Hs %<st "%{Referer}>h" "%{User-Agent}>h" %Ss:%Sh
logformat referrer   %ts.%03tu %>a %{Referer}>h %ru
logformat useragent  %>a [%tl] "%{User-Agent}>h"

	When the log_mime_hdrs directive is set to ON. The squid, common and combined
	formats have a safely encoded copy of the mime headers appended to each line
	within a pair of brackets.

	The common and combined formats are not quite true to the Apache definition.
	The logs from Squid contain an extra status and hierarchy code appended.
DOC_END

NAME: access_log cache_access_log
TYPE: access_log
LOC: Config.Log.accesslogs
DEFAULT_IF_NONE: daemon:@DEFAULT_ACCESS_LOG@ squid
DOC_START
	These files log client request activities. Has a line every HTTP or
	ICP request. The format is:
	access_log <module>:<place> [<logformat name> [acl acl ...]]
	access_log none [acl acl ...]]
	
	Will log to the specified module:place using the specified format (which
	must be defined in a logformat directive) those entries which match
	ALL the acl's specified (which must be defined in acl clauses).
	If no acl is specified, all requests will be logged to this destination.
	
	===== Modules Currently available =====
	
	none	Do not log any requests matching these ACL.
		Do not specify Place or logformat name.
	
	stdio	Write each log line to disk immediately at the completion of
		each request.
		Place: the filename and path to be written.
	
	daemon	Very similar to stdio. But instead of writing to disk the log
		line is passed to a daemon helper for asychronous handling instead.
		Place: varies depending on the daemon.
		
		log_file_daemon Place: the file name and path to be written.
	
	syslog	To log each request via syslog facility.
		Place: The syslog facility and priority level for these entries.
		Place Format:  facility.priority

		where facility could be any of:
			authpriv, daemon, local0 ... local7 or user.

		And priority could be any of:
			err, warning, notice, info, debug.
	
	udp	To send each log line as text data to a UDP receiver.
		Place: The destination host name or IP and port.
		Place Format:   \\host:port

	tcp	To send each log line as text data to a TCP receiver.
		Place: The destination host name or IP and port.
		Place Format:   \\host:port

	Default:
		access_log daemon:@DEFAULT_ACCESS_LOG@ squid
DOC_END

NAME: icap_log
TYPE: access_log
IFDEF: ICAP_CLIENT
LOC: Config.Log.icaplogs
DEFAULT: none
DOC_START
	ICAP log files record ICAP transaction summaries, one line per
	transaction.

	The icap_log option format is:
	icap_log <filepath> [<logformat name> [acl acl ...]]
	icap_log none [acl acl ...]]
	
	Please see access_log option documentation for details. The two
	kinds of logs share the overall configuration approach and many
	features.

	ICAP processing of a single HTTP message or transaction may
	require multiple ICAP transactions.  In such cases, multiple
	ICAP transaction log lines will correspond to a single access
	log line.

	ICAP log uses logformat codes that make sense for an ICAP
	transaction. Header-related codes are applied to the HTTP header
	embedded in an ICAP server response, with the following caveats:
	For REQMOD, there is no HTTP response header unless the ICAP
	server performed request satisfaction. For RESPMOD, the HTTP
	request header is the header sent to the ICAP server. For
	OPTIONS, there are no HTTP headers.

	The following format codes are also available for ICAP logs:

		icap::<A	ICAP server IP address. Similar to <A.

		icap::<service_name	ICAP service name from the icap_service
				option in Squid configuration file.

		icap::ru	ICAP Request-URI. Similar to ru.

		icap::rm	ICAP request method (REQMOD, RESPMOD, or 
				OPTIONS). Similar to existing rm.

		icap::>st	Bytes sent to the ICAP server (TCP payload
				only; i.e., what Squid writes to the socket).

		icap::<st	Bytes received from the ICAP server (TCP
				payload only; i.e., what Squid reads from
				the socket).

		icap::<bs	Number of message body bytes received from the
				ICAP server. ICAP message body, if any, usually
				includes encapsulated HTTP message headers and
				possibly encapsulated HTTP message body. The
				HTTP body part is dechunked before its size is
				computed.

		icap::tr 	Transaction response time (in
				milliseconds).  The timer starts when
				the ICAP transaction is created and
				stops when the transaction is completed.
				Similar to tr.

		icap::tio	Transaction I/O time (in milliseconds). The
				timer starts when the first ICAP request
				byte is scheduled for sending. The timers
				stops when the last byte of the ICAP response
				is received.

		icap::to 	Transaction outcome: ICAP_ERR* for all
				transaction errors, ICAP_OPT for OPTION
				transactions, ICAP_ECHO for 204
				responses, ICAP_MOD for message
				modification, and ICAP_SAT for request
				satisfaction. Similar to Ss.

		icap::Hs	ICAP response status code. Similar to Hs.

		icap::>h	ICAP request header(s). Similar to >h.

		icap::<h	ICAP response header(s). Similar to <h.

	The default ICAP log format, which can be used without an explicit
	definition, is called icap_squid:

logformat icap_squid %ts.%03tu %6icap::tr %>a %icap::to/%03icap::Hs %icap::<size %icap::rm %icap::ru% %un -/%icap::<A -

	See also: logformat, log_icap, and %adapt::<last_h 
DOC_END

NAME: logfile_daemon
TYPE: string
DEFAULT: @DEFAULT_LOGFILED@
LOC: Log::TheConfig.logfile_daemon
DOC_START
	Specify the path to the logfile-writing daemon. This daemon is
	used to write the access and store logs, if configured.

	Squid sends a number of commands to the log daemon:
	  L<data>\n - logfile data
	  R\n - rotate file
	  T\n - truncate file
	  O\n - reopen file
	  F\n - flush file
	  r<n>\n - set rotate count to <n>
	  b<n>\n - 1 = buffer output, 0 = don't buffer output

	No responses is expected.
DOC_END

NAME: log_access
TYPE: acl_access
LOC: Config.accessList.log
DEFAULT: none
COMMENT: allow|deny acl acl...
DOC_START
	This options allows you to control which requests gets logged
	to access.log (see access_log directive). Requests denied for
	logging will also not be accounted for in performance counters.

	This clause only supports fast acl types.
	See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
DOC_END

NAME: log_icap
TYPE: acl_access
IFDEF: ICAP_CLIENT
LOC: Config.accessList.icap
DEFAULT: none
DOC_START
	This options allows you to control which requests get logged
	to icap.log. See the icap_log directive for ICAP log details.
DOC_END

NAME: cache_store_log
TYPE: string
DEFAULT: none
LOC: Config.Log.store
DOC_START
	Logs the activities of the storage manager.  Shows which
	objects are ejected from the cache, and which objects are
	saved and for how long.  To disable, enter "none" or remove the line.
	There are not really utilities to analyze this data, so you can safely
	disable it.

	Example:
		cache_store_log @DEFAULT_STORE_LOG@
DOC_END

NAME: cache_swap_state cache_swap_log
TYPE: string
LOC: Config.Log.swap
DEFAULT: none
DOC_START
	Location for the cache "swap.state" file. This index file holds
	the metadata of objects saved on disk.  It is used to rebuild
	the cache during startup.  Normally this file resides in each
	'cache_dir' directory, but you may specify an alternate
	pathname here.  Note you must give a full filename, not just
	a directory. Since this is the index for the whole object
	list you CANNOT periodically rotate it!

	If %s can be used in the file name it will be replaced with a
	a representation of the cache_dir name where each / is replaced
	with '.'. This is needed to allow adding/removing cache_dir
	lines when cache_swap_log is being used.

	If have more than one 'cache_dir', and %s is not used in the name
	these swap logs will have names such as:

		cache_swap_log.00
		cache_swap_log.01
		cache_swap_log.02

	The numbered extension (which is added automatically)
	corresponds to the order of the 'cache_dir' lines in this
	configuration file.  If you change the order of the 'cache_dir'
	lines in this file, these index files will NOT correspond to
	the correct 'cache_dir' entry (unless you manually rename
	them).  We recommend you do NOT use this option.  It is
	better to keep these index files in each 'cache_dir' directory.
DOC_END

NAME: logfile_rotate
TYPE: int
DEFAULT: 10
LOC: Config.Log.rotateNumber
DOC_START
	Specifies the number of logfile rotations to make when you
	type 'squid -k rotate'. The default is 10, which will rotate
	with extensions 0 through 9. Setting logfile_rotate to 0 will
	disable the file name rotation, but the logfiles are still closed
	and re-opened. This will enable you to rename the logfiles
	yourself just before sending the rotate signal.

	Note, the 'squid -k rotate' command normally sends a USR1
	signal to the running squid process.  In certain situations
	(e.g. on Linux with Async I/O), USR1 is used for other
	purposes, so -k rotate uses another signal.  It is best to get
	in the habit of using 'squid -k rotate' instead of 'kill -USR1
	<pid>'.

	Note, from Squid-3.1 this option has no effect on the cache.log,
	that log can be rotated separately by using debug_options
DOC_END

NAME: emulate_httpd_log
TYPE: obsolete
DOC_START
	Replace this with an access_log directive using the format 'common' or 'combined'.
DOC_END

NAME: log_ip_on_direct
COMMENT: on|off
TYPE: onoff
DEFAULT: on
LOC: Config.onoff.log_ip_on_direct
DOC_START
	Log the destination IP address in the hierarchy log tag when going
	direct. Earlier Squid versions logged the hostname here. If you
	prefer the old way set this to off.
DOC_END

NAME: mime_table
TYPE: string
DEFAULT: @DEFAULT_MIME_TABLE@
LOC: Config.mimeTablePathname
DOC_START
	Pathname to Squid's MIME table. You shouldn't need to change
	this, but the default file contains examples and formatting
	information if you do.
DOC_END

NAME: log_mime_hdrs
COMMENT: on|off
TYPE: onoff
LOC: Config.onoff.log_mime_hdrs
DEFAULT: off
DOC_START
	The Cache can record both the request and the response MIME
	headers for each HTTP transaction.  The headers are encoded
	safely and will appear as two bracketed fields at the end of
	the access log (for either the native or httpd-emulated log
	formats).  To enable this logging set log_mime_hdrs to 'on'.
DOC_END

NAME: useragent_log
TYPE: obsolete
DOC_START
	Replace this with an access_log directive using the format 'useragent'.
DOC_END

NAME: referer_log referrer_log
TYPE: obsolete
DOC_START
	Replace this with an access_log directive using the format 'referrer'.
DOC_END

NAME: pid_filename
TYPE: string
DEFAULT: @DEFAULT_PID_FILE@
LOC: Config.pidFilename
DOC_START
	A filename to write the process-id to.  To disable, enter "none".
DOC_END

NAME: log_fqdn
TYPE: obsolete
DOC_START
	Remove this option from your config. To log FQDN use %>A in the log format.
DOC_END

NAME: client_netmask
TYPE: address
LOC: Config.Addrs.client_netmask
DEFAULT: no_addr
DOC_START
	A netmask for client addresses in logfiles and cachemgr output.
	Change this to protect the privacy of your cache clients.
	A netmask of 255.255.255.0 will log all IP's in that range with
	the last digit set to '0'.
DOC_END

NAME: forward_log
TYPE: obsolete
DOC_START
	Use a regular access.log with ACL limiting it to MISS events.
DOC_END

NAME: strip_query_terms
TYPE: onoff
LOC: Config.onoff.strip_query_terms
DEFAULT: on
DOC_START
	By default, Squid strips query terms from requested URLs before
	logging.  This protects your user's privacy.
DOC_END

NAME: buffered_logs
COMMENT: on|off
TYPE: onoff
DEFAULT: off
LOC: Config.onoff.buffered_logs
DOC_START
	cache.log log file is written with stdio functions, and as such
	it can be buffered or unbuffered. By default it will be unbuffered.
	Buffering it can speed up the writing slightly (though you are
	unlikely to need to worry unless you run with tons of debugging
	enabled in which case performance will suffer badly anyway..).
DOC_END

NAME: netdb_filename
TYPE: string
DEFAULT: @DEFAULT_NETDB_FILE@
LOC: Config.netdbFilename
IFDEF: USE_ICMP
DOC_START
	A filename where Squid stores it's netdb state between restarts.
	To disable, enter "none".
DOC_END

COMMENT_START
 OPTIONS FOR TROUBLESHOOTING
 -----------------------------------------------------------------------------
COMMENT_END

NAME: cache_log
TYPE: string
DEFAULT_IF_NONE: @DEFAULT_CACHE_LOG@
LOC: Debug::cache_log
DOC_START
	Cache logging file. This is where general information about
	your cache's behavior goes. You can increase the amount of data
	logged to this file and how often its rotated with "debug_options"
DOC_END

NAME: debug_options
TYPE: eol
DEFAULT: ALL,1
LOC: Debug::debugOptions
DOC_START
	Logging options are set as section,level where each source file
	is assigned a unique section.  Lower levels result in less
	output,  Full debugging (level 9) can result in a very large
	log file, so be careful.

	The magic word "ALL" sets debugging levels for all sections.
	We recommend normally running with "ALL,1".

	The rotate=N option can be used to keep more or less of these logs
	than would otherwise be kept by logfile_rotate.
	For most uses a single log should be enough to monitor current
	events affecting Squid.
DOC_END

NAME: coredump_dir
TYPE: string
LOC: Config.coredump_dir
DEFAULT_IF_NONE: none
DOC_START
	By default Squid leaves core files in the directory from where
	it was started. If you set 'coredump_dir' to a directory
	that exists, Squid will chdir() to that directory at startup
	and coredump files will be left there.

NOCOMMENT_START

# Leave coredumps in the first cache dir
coredump_dir @DEFAULT_SWAP_DIR@
NOCOMMENT_END
DOC_END


COMMENT_START
 OPTIONS FOR FTP GATEWAYING
 -----------------------------------------------------------------------------
COMMENT_END

NAME: ftp_user
TYPE: string
DEFAULT: Squid@
LOC: Config.Ftp.anon_user
DOC_START
	If you want the anonymous login password to be more informative
	(and enable the use of picky ftp servers), set this to something
	reasonable for your domain, like wwwuser@somewhere.net

	The reason why this is domainless by default is the
	request can be made on the behalf of a user in any domain,
	depending on how the cache is used.
	Some ftp server also validate the email address is valid
	(for example perl.com).
DOC_END

NAME: ftp_passive
TYPE: onoff
DEFAULT: on
LOC: Config.Ftp.passive
DOC_START
	If your firewall does not allow Squid to use passive
	connections, turn off this option.

	Use of ftp_epsv_all option requires this to be ON.
DOC_END

NAME: ftp_epsv_all
TYPE: onoff
DEFAULT: off
LOC: Config.Ftp.epsv_all
DOC_START
	FTP Protocol extensions permit the use of a special "EPSV ALL" command.

	NATs may be able to put the connection on a "fast path" through the
	translator, as the EPRT command will never be used and therefore,
	translation of the data portion of the segments will never be needed.

	When a client only expects to do two-way FTP transfers this may be
	useful.
	If squid finds that it must do a three-way FTP transfer after issuing
	an EPSV ALL command, the FTP session will fail.

	If you have any doubts about this option do not use it.
	Squid will nicely attempt all other connection methods.

	Requires ftp_passive to be ON (default) for any effect.
DOC_END

NAME: ftp_epsv
TYPE: onoff
DEFAULT: on
LOC: Config.Ftp.epsv
DOC_START
	FTP Protocol extensions permit the use of a special "EPSV" command.

	NATs may be able to put the connection on a "fast path" through the
	translator using EPSV, as the EPRT command will never be used
	and therefore, translation of the data portion of the segments 
	will never be needed.

	Turning this OFF will prevent EPSV being attempted.
	WARNING: Doing so will convert Squid back to the old behavior with all
	the related problems with external NAT devices/layers.

	Requires ftp_passive to be ON (default) for any effect.
DOC_END

NAME: ftp_eprt
TYPE: onoff
DEFAULT: on
LOC: Config.Ftp.eprt
DOC_START
	FTP Protocol extensions permit the use of a special "EPRT" command.

	This extension provides a protocol neutral alternative to the
	IPv4-only PORT command. When supported it enables active FTP data
	channels over IPv6 and efficient NAT handling.

	Turning this OFF will prevent EPRT being attempted and will skip
	straight to using PORT for IPv4 servers.

	Some devices are known to not handle this extension correctly and
	may result in crashes. Devices which suport EPRT enough to fail
	cleanly will result in Squid attempting PORT anyway. This directive
	should only be disabled when EPRT results in device failures.

	WARNING: Doing so will convert Squid back to the old behavior with all
	the related problems with external NAT devices/layers and IPv4-only FTP.
DOC_END

NAME: ftp_sanitycheck
TYPE: onoff
DEFAULT: on
LOC: Config.Ftp.sanitycheck
DOC_START
	For security and data integrity reasons Squid by default performs
	sanity checks of the addresses of FTP data connections ensure the
	data connection is to the requested server. If you need to allow
	FTP connections to servers using another IP address for the data
	connection turn this off.
DOC_END

NAME: ftp_telnet_protocol
TYPE: onoff
DEFAULT: on
LOC: Config.Ftp.telnet
DOC_START
	The FTP protocol is officially defined to use the telnet protocol
	as transport channel for the control connection. However, many
	implementations are broken and does not respect this aspect of
	the FTP protocol.

	If you have trouble accessing files with ASCII code 255 in the
	path or similar problems involving this ASCII code you can
	try setting this directive to off. If that helps, report to the
	operator of the FTP server in question that their FTP server
	is broken and does not follow the FTP standard.
DOC_END

COMMENT_START
 OPTIONS FOR EXTERNAL SUPPORT PROGRAMS
 -----------------------------------------------------------------------------
COMMENT_END

NAME: diskd_program
TYPE: string
DEFAULT: @DEFAULT_DISKD@
LOC: Config.Program.diskd
DOC_START
	Specify the location of the diskd executable.
	Note this is only useful if you have compiled in
	diskd as one of the store io modules.
DOC_END

NAME: unlinkd_program
IFDEF: USE_UNLINKD
TYPE: string
DEFAULT: @DEFAULT_UNLINKD@
LOC: Config.Program.unlinkd
DOC_START
	Specify the location of the executable for file deletion process.
DOC_END

NAME: pinger_program
TYPE: string
DEFAULT: @DEFAULT_PINGER@
LOC: Config.pinger.program
IFDEF: USE_ICMP
DOC_START
	Specify the location of the executable for the pinger process.
DOC_END

NAME: pinger_enable
TYPE: onoff
DEFAULT: on
LOC: Config.pinger.enable
IFDEF: USE_ICMP
DOC_START
	Control whether the pinger is active at run-time.
	Enables turning ICMP pinger on and off with a simple
	squid -k reconfigure.
DOC_END


COMMENT_START
 OPTIONS FOR URL REWRITING
 -----------------------------------------------------------------------------
COMMENT_END

NAME: url_rewrite_program redirect_program
TYPE: wordlist
LOC: Config.Program.redirect
DEFAULT: none
DOC_START
	Specify the location of the executable URL rewriter to use.
	Since they can perform almost any function there isn't one included.

	For each requested URL, the rewriter will receive on line with the format

	URL <SP> client_ip "/" fqdn <SP> user <SP> method [<SP> kvpairs]<NL>

	In the future, the rewriter interface will be extended with
	key=value pairs ("kvpairs" shown above).  Rewriter programs
	should be prepared to receive and possibly ignore additional
	whitespace-separated tokens on each input line.

	And the rewriter may return a rewritten URL. The other components of
	the request line does not need to be returned (ignored if they are).

	The rewriter can also indicate that a client-side redirect should
	be performed to the new URL. This is done by prefixing the returned
	URL with "301:" (moved permanently) or 302: (moved temporarily), etc.

	By default, a URL rewriter is not used.
DOC_END

NAME: url_rewrite_children redirect_children
TYPE: HelperChildConfig
DEFAULT: 20 startup=0 idle=1 concurrency=0
LOC: Config.redirectChildren
DOC_START
	The maximum number of redirector processes to spawn. If you limit
	it too few Squid will have to wait for them to process a backlog of
	URLs, slowing it down. If you allow too many they will use RAM
	and other system resources noticably.
	
	The startup= and idle= options allow some measure of skew in your
	tuning.
	
		startup=
	
	Sets a minimum of how many processes are to be spawned when Squid
	starts or reconfigures. When set to zero the first request will
	cause spawning of the first child process to handle it.
	
	Starting too few will cause an initial slowdown in traffic as Squid
	attempts to simultaneously spawn enough processes to cope.
	
		idle=
	
	Sets a minimum of how many processes Squid is to try and keep available
	at all times. When traffic begins to rise above what the existing
	processes can handle this many more will be spawned up to the maximum
	configured. A minimum setting of 1 is required.

		concurrency=

	The number of requests each redirector helper can handle in
	parallel. Defaults to 0 which indicates the redirector
	is a old-style single threaded redirector.

	When this directive is set to a value >= 1 then the protocol
	used to communicate with the helper is modified to include
	a request ID in front of the request/response. The request
	ID from the request must be echoed back with the response
	to that request.
DOC_END

NAME: url_rewrite_host_header redirect_rewrites_host_header
TYPE: onoff
DEFAULT: on
LOC: Config.onoff.redir_rewrites_host
DOC_START
	By default Squid rewrites any Host: header in redirected
	requests.  If you are running an accelerator this may
	not be a wanted effect of a redirector.

	WARNING: Entries are cached on the result of the URL rewriting
	process, so be careful if you have domain-virtual hosts.
DOC_END

NAME: url_rewrite_access redirector_access
TYPE: acl_access
DEFAULT: none
LOC: Config.accessList.redirector
DOC_START
	If defined, this access list specifies which requests are
	sent to the redirector processes.  By default all requests
	are sent.

	This clause supports both fast and slow acl types.
	See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
DOC_END

NAME: url_rewrite_bypass redirector_bypass
TYPE: onoff
LOC: Config.onoff.redirector_bypass
DEFAULT: off
DOC_START
	When this is 'on', a request will not go through the
	redirector if all redirectors are busy.  If this is 'off'
	and the redirector queue grows too large, Squid will exit
	with a FATAL error and ask you to increase the number of
	redirectors.  You should only enable this if the redirectors
	are not critical to your caching system.  If you use
	redirectors for access control, and you enable this option,
	users may have access to pages they should not
	be allowed to request.
DOC_END

COMMENT_START
 OPTIONS FOR TUNING THE CACHE
 -----------------------------------------------------------------------------
COMMENT_END

NAME: cache no_cache
TYPE: acl_access
DEFAULT: none
LOC: Config.accessList.noCache
DOC_START
	A list of ACL elements which, if matched and denied, cause the request to
	not be satisfied from the cache and the reply to not be cached.
	In other words, use this to force certain objects to never be cached.

	You must use the words 'allow' or 'deny' to indicate whether items
	matching the ACL should be allowed or denied into the cache.

	Default is to allow all to be cached.

	This clause supports both fast and slow acl types.
	See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
DOC_END

NAME: max_stale
COMMENT: time-units
TYPE: time_t
LOC: Config.maxStale
DEFAULT: 1 week
DOC_START
	This option puts an upper limit on how stale content Squid
	will serve from the cache if cache validation fails.
	Can be overriden by the refresh_pattern max-stale option.
DOC_END

NAME: refresh_pattern
TYPE: refreshpattern
LOC: Config.Refresh
DEFAULT: none
DOC_START
	usage: refresh_pattern [-i] regex min percent max [options]

	By default, regular expressions are CASE-SENSITIVE.  To make
	them case-insensitive, use the -i option.

	'Min' is the time (in minutes) an object without an explicit
	expiry time should be considered fresh. The recommended
	value is 0, any higher values may cause dynamic applications
	to be erroneously cached unless the application designer
	has taken the appropriate actions.

	'Percent' is a percentage of the objects age (time since last
	modification age) an object without explicit expiry time
	will be considered fresh.

	'Max' is an upper limit on how long objects without an explicit
	expiry time will be considered fresh.

	options: override-expire
		 override-lastmod
		 reload-into-ims
		 ignore-reload
		 ignore-no-cache
		 ignore-no-store
		 ignore-must-revalidate
		 ignore-private
		 ignore-auth
		 max-stale=NN
		 refresh-ims
		 store-stale

		override-expire enforces min age even if the server
		sent an explicit expiry time (e.g., with the
		Expires: header or Cache-Control: max-age). Doing this
		VIOLATES the HTTP standard.  Enabling this feature
		could make you liable for problems which it causes.

		Note: override-expire does not enforce staleness - it only extends
		freshness / min. If the server returns a Expires time which
		is longer than your max time, Squid will still consider
		the object fresh for that period of time.

		override-lastmod enforces min age even on objects
		that were modified recently.

		reload-into-ims changes client no-cache or ``reload''
		to If-Modified-Since requests. Doing this VIOLATES the
		HTTP standard. Enabling this feature could make you
		liable for problems which it causes.

		ignore-reload ignores a client no-cache or ``reload''
		header. Doing this VIOLATES the HTTP standard. Enabling
		this feature could make you liable for problems which
		it causes.

		ignore-no-cache ignores any ``Pragma: no-cache'' and
		``Cache-control: no-cache'' headers received from a server.
		The HTTP RFC never allows the use of this (Pragma) header
		from a server, only a client, though plenty of servers
		send it anyway.

		ignore-no-store ignores any ``Cache-control: no-store''
		headers received from a server. Doing this VIOLATES
		the HTTP standard. Enabling this feature could make you
		liable for problems which it causes.

		ignore-must-revalidate ignores any ``Cache-Control: must-revalidate``
		headers received from a server. Doing this VIOLATES
		the HTTP standard. Enabling this feature could make you
		liable for problems which it causes.

		ignore-private ignores any ``Cache-control: private''
		headers received from a server. Doing this VIOLATES
		the HTTP standard. Enabling this feature could make you
		liable for problems which it causes.

		ignore-auth caches responses to requests with authorization,
		as if the originserver had sent ``Cache-control: public''
		in the response header. Doing this VIOLATES the HTTP standard.
		Enabling this feature could make you liable for problems which
		it causes.

		refresh-ims causes squid to contact the origin server
		when a client issues an If-Modified-Since request. This
		ensures that the client will receive an updated version
		if one is available.

		store-stale stores responses even if they don't have explicit 
		freshness or a validator (i.e., Last-Modified or an ETag) 
		present, or if they're already stale. By default, Squid will 
		not cache such responses because they usually can't be
		reused. Note that such responses will be stale by default.

		max-stale=NN provide a maximum staleness factor. Squid won't
		serve objects more stale than this even if it failed to
		validate the object. Default: use the max_stale global limit.

	Basically a cached object is:

		FRESH if expires < now, else STALE
		STALE if age > max
		FRESH if lm-factor < percent, else STALE
		FRESH if age < min
		else STALE

	The refresh_pattern lines are checked in the order listed here.
	The first entry which matches is used.  If none of the entries
	match the default will be used.

	Note, you must uncomment all the default lines if you want
	to change one. The default setting is only active if none is
	used.

NOCOMMENT_START

# Add any of your own refresh_pattern entries above these.
refresh_pattern ^ftp:		1440	20%	10080
refresh_pattern ^gopher:	1440	0%	1440
refresh_pattern -i (/cgi-bin/|\?) 0	0%	0
refresh_pattern .		0	20%	4320
NOCOMMENT_END
DOC_END

NAME: quick_abort_min
COMMENT: (KB)
TYPE: kb_int64_t
DEFAULT: 16 KB
LOC: Config.quickAbort.min
DOC_NONE

NAME: quick_abort_max
COMMENT: (KB)
TYPE: kb_int64_t
DEFAULT: 16 KB
LOC: Config.quickAbort.max
DOC_NONE

NAME: quick_abort_pct
COMMENT: (percent)
TYPE: int
DEFAULT: 95
LOC: Config.quickAbort.pct
DOC_START
	The cache by default continues downloading aborted requests
	which are almost completed (less than 16 KB remaining). This
	may be undesirable on slow (e.g. SLIP) links and/or very busy
	caches.  Impatient users may tie up file descriptors and
	bandwidth by repeatedly requesting and immediately aborting
	downloads.

	When the user aborts a request, Squid will check the
	quick_abort values to the amount of data transfered until
	then.

	If the transfer has less than 'quick_abort_min' KB remaining,
	it will finish the retrieval.

	If the transfer has more than 'quick_abort_max' KB remaining,
	it will abort the retrieval.

	If more than 'quick_abort_pct' of the transfer has completed,
	it will finish the retrieval.

	If you do not want any retrieval to continue after the client
	has aborted, set both 'quick_abort_min' and 'quick_abort_max'
	to '0 KB'.

	If you want retrievals to always continue if they are being
	cached set 'quick_abort_min' to '-1 KB'.
DOC_END

NAME: read_ahead_gap
COMMENT: buffer-size
TYPE: b_int64_t
LOC: Config.readAheadGap
DEFAULT: 16 KB
DOC_START
	The amount of data the cache will buffer ahead of what has been
	sent to the client when retrieving an object from another server.
DOC_END

NAME: negative_ttl
IFDEF: USE_HTTP_VIOLATIONS
COMMENT: time-units
TYPE: time_t
LOC: Config.negativeTtl
DEFAULT: 0 seconds
DOC_START
	Set the Default Time-to-Live (TTL) for failed requests.
	Certain types of failures (such as "connection refused" and
	"404 Not Found") are able to be negatively-cached for a short time.
	Modern web servers should provide Expires: header, however if they
	do not this can provide a minimum TTL.
	The default is not to cache errors with unknown expiry details.

	Note that this is different from negative caching of DNS lookups.

	WARNING: Doing this VIOLATES the HTTP standard.  Enabling
	this feature could make you liable for problems which it
	causes.
DOC_END

NAME: positive_dns_ttl
COMMENT: time-units
TYPE: time_t
LOC: Config.positiveDnsTtl
DEFAULT: 6 hours
DOC_START
	Upper limit on how long Squid will cache positive DNS responses.
	Default is 6 hours (360 minutes). This directive must be set
	larger than negative_dns_ttl.
DOC_END

NAME: negative_dns_ttl
COMMENT: time-units
TYPE: time_t
LOC: Config.negativeDnsTtl
DEFAULT: 1 minutes
DOC_START
	Time-to-Live (TTL) for negative caching of failed DNS lookups.
	This also sets the lower cache limit on positive lookups.
	Minimum value is 1 second, and it is not recommendable to go
	much below 10 seconds.
DOC_END

NAME: range_offset_limit
COMMENT: size [acl acl...]
TYPE: acl_b_size_t
LOC: Config.rangeOffsetLimit
DEFAULT: none
DOC_START
	usage: (size) [units] [[!]aclname]
	
	Sets an upper limit on how far (number of bytes) into the file 
	a Range request	may be to cause Squid to prefetch the whole file. 
	If beyond this limit, Squid forwards the Range request as it is and 
	the result is NOT cached.
	
	This is to stop a far ahead range request (lets say start at 17MB)
	from making Squid fetch the whole object up to that point before
	sending anything to the client.
	
	Multiple range_offset_limit lines may be specified, and they will 
	be searched from top to bottom on each request until a match is found. 
	The first match found will be used.  If no line matches a request, the 
	default limit of 0 bytes will be used.
	
	'size' is the limit specified as a number of units.
	
	'units' specifies whether to use bytes, KB, MB, etc.
	If no units are specified bytes are assumed.
	
	A size of 0 causes Squid to never fetch more than the
	client requested. (default)
	
	A size of 'none' causes Squid to always fetch the object from the
	beginning so it may cache the result. (2.0 style)
	
	'aclname' is the name of a defined ACL.
	
	NP: Using 'none' as the byte value here will override any quick_abort settings 
	    that may otherwise apply to the range request. The range request will
	    be fully fetched from start to finish regardless of the client
	    actions. This affects bandwidth usage.
DOC_END

NAME: minimum_expiry_time
COMMENT: (seconds)
TYPE: time_t
LOC: Config.minimum_expiry_time
DEFAULT: 60 seconds
DOC_START
	The minimum caching time according to (Expires - Date)
	Headers Squid honors if the object can't be revalidated
	defaults to 60 seconds. In reverse proxy environments it
	might be desirable to honor shorter object lifetimes. It
	is most likely better to make your server return a
	meaningful Last-Modified header however. In ESI environments
	where page fragments often have short lifetimes, this will
	often be best set to 0.
DOC_END

NAME: store_avg_object_size
COMMENT: (kbytes)
TYPE: kb_int64_t
DEFAULT: 13 KB
LOC: Config.Store.avgObjectSize
DOC_START
	Average object size, used to estimate number of objects your
	cache can hold.  The default is 13 KB.
DOC_END

NAME: store_objects_per_bucket
TYPE: int
DEFAULT: 20
LOC: Config.Store.objectsPerBucket
DOC_START
	Target number of objects per bucket in the store hash table.
	Lowering this value increases the total number of buckets and
	also the storage maintenance rate.  The default is 20.
DOC_END

COMMENT_START
 HTTP OPTIONS
 -----------------------------------------------------------------------------
COMMENT_END

NAME: request_header_max_size
COMMENT: (KB)
TYPE: b_size_t
DEFAULT: 64 KB
LOC: Config.maxRequestHeaderSize
DOC_START
	This specifies the maximum size for HTTP headers in a request.
	Request headers are usually relatively small (about 512 bytes).
	Placing a limit on the request header size will catch certain
	bugs (for example with persistent connections) and possibly
	buffer-overflow or denial-of-service attacks.
DOC_END

NAME: reply_header_max_size
COMMENT: (KB)
TYPE: b_size_t
DEFAULT: 64 KB
LOC: Config.maxReplyHeaderSize
DOC_START
	This specifies the maximum size for HTTP headers in a reply.
	Reply headers are usually relatively small (about 512 bytes).
	Placing a limit on the reply header size will catch certain
	bugs (for example with persistent connections) and possibly
	buffer-overflow or denial-of-service attacks.
DOC_END

NAME: request_body_max_size
COMMENT: (bytes)
TYPE: b_int64_t
DEFAULT: 0 KB
LOC: Config.maxRequestBodySize
DOC_START
	This specifies the maximum size for an HTTP request body.
	In other words, the maximum size of a PUT/POST request.
	A user who attempts to send a request with a body larger
	than this limit receives an "Invalid Request" error message.
	If you set this parameter to a zero (the default), there will
	be no limit imposed.
DOC_END

NAME: client_request_buffer_max_size
COMMENT: (bytes)
TYPE: b_size_t
DEFAULT: 512 KB
LOC: Config.maxRequestBufferSize
DOC_START
	This specifies the maximum buffer size of a client request.
	It prevents squid eating too much memory when somebody uploads
	a large file.
DOC_END

NAME: chunked_request_body_max_size
COMMENT: (bytes)
TYPE: b_int64_t
DEFAULT: 64 KB
LOC: Config.maxChunkedRequestBodySize
DOC_START
	A broken or confused HTTP/1.1 client may send a chunked HTTP
	request to Squid. Squid does not have full support for that
	feature yet. To cope with such requests, Squid buffers the
	entire request and then dechunks request body to create a
	plain HTTP/1.0 request with a known content length. The plain
	request is then used by the rest of Squid code as usual.

	The option value specifies the maximum size of the buffer used
	to hold the request before the conversion. If the chunked
	request size exceeds the specified limit, the conversion
	fails, and the client receives an "unsupported request" error,
	as if dechunking was disabled.

	Dechunking is enabled by default. To disable conversion of
	chunked requests, set the maximum to zero.

	Request dechunking feature and this option in particular are a
	temporary hack. When chunking requests and responses are fully
	supported, there will be no need to buffer a chunked request.
DOC_END

NAME: broken_posts
IFDEF: USE_HTTP_VIOLATIONS
TYPE: acl_access
DEFAULT: none
LOC: Config.accessList.brokenPosts
DOC_START
	A list of ACL elements which, if matched, causes Squid to send
	an extra CRLF pair after the body of a PUT/POST request.

	Some HTTP servers has broken implementations of PUT/POST,
	and rely on an extra CRLF pair sent by some WWW clients.

	Quote from RFC2616 section 4.1 on this matter:

	  Note: certain buggy HTTP/1.0 client implementations generate an
	  extra CRLF's after a POST request. To restate what is explicitly
	  forbidden by the BNF, an HTTP/1.1 client must not preface or follow
	  a request with an extra CRLF.

	This clause only supports fast acl types.
	See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.

Example:
 acl buggy_server url_regex ^http://....
 broken_posts allow buggy_server
DOC_END

NAME: adaptation_uses_indirect_client icap_uses_indirect_client
COMMENT: on|off
TYPE: onoff
IFDEF: FOLLOW_X_FORWARDED_FOR&&USE_ADAPTATION
DEFAULT: on
LOC: Adaptation::Config::use_indirect_client
DOC_START
	Controls whether the indirect client IP address (instead of the direct
	client IP address) is passed to adaptation services.

	See also: follow_x_forwarded_for adaptation_send_client_ip
DOC_END

NAME: via
IFDEF: USE_HTTP_VIOLATIONS
COMMENT: on|off
TYPE: onoff
DEFAULT: on
LOC: Config.onoff.via
DOC_START
	If set (default), Squid will include a Via header in requests and
	replies as required by RFC2616.
DOC_END

NAME: ie_refresh
COMMENT: on|off
TYPE: onoff
LOC: Config.onoff.ie_refresh
DEFAULT: off
DOC_START
	Microsoft Internet Explorer up until version 5.5 Service
	Pack 1 has an issue with transparent proxies, wherein it
	is impossible to force a refresh.  Turning this on provides
	a partial fix to the problem, by causing all IMS-REFRESH
	requests from older IE versions to check the origin server
	for fresh content.  This reduces hit ratio by some amount
	(~10% in my experience), but allows users to actually get
	fresh content when they want it.  Note because Squid
	cannot tell if the user is using 5.5 or 5.5SP1, the behavior
	of 5.5 is unchanged from old versions of Squid (i.e. a
	forced refresh is impossible).  Newer versions of IE will,
	hopefully, continue to have the new behavior and will be
	handled based on that assumption.  This option defaults to
	the old Squid behavior, which is better for hit ratios but
	worse for clients using IE, if they need to be able to
	force fresh content.
DOC_END

NAME: vary_ignore_expire
COMMENT: on|off
TYPE: onoff
LOC: Config.onoff.vary_ignore_expire
DEFAULT: off
DOC_START
	Many HTTP servers supporting Vary gives such objects
	immediate expiry time with no cache-control header
	when requested by a HTTP/1.0 client. This option
	enables Squid to ignore such expiry times until
	HTTP/1.1 is fully implemented.

	WARNING: If turned on this may eventually cause some
	varying objects not intended for caching to get cached.
DOC_END

NAME: request_entities
TYPE: onoff
LOC: Config.onoff.request_entities
DEFAULT: off
DOC_START
	Squid defaults to deny GET and HEAD requests with request entities,
	as the meaning of such requests are undefined in the HTTP standard
	even if not explicitly forbidden.

	Set this directive to on if you have clients which insists
	on sending request entities in GET or HEAD requests. But be warned
	that there is server software (both proxies and web servers) which
	can fail to properly process this kind of request which may make you
	vulnerable to cache pollution attacks if enabled.
DOC_END

NAME: request_header_access
IFDEF: USE_HTTP_VIOLATIONS
TYPE: http_header_access[]
LOC: Config.request_header_access
DEFAULT: none
DOC_START
	Usage: request_header_access header_name allow|deny [!]aclname ...

	WARNING: Doing this VIOLATES the HTTP standard.  Enabling
	this feature could make you liable for problems which it
	causes.

	This option replaces the old 'anonymize_headers' and the
	older 'http_anonymizer' option with something that is much
	more configurable. This new method creates a list of ACLs
	for each header, allowing you very fine-tuned header
	mangling.

	This option only applies to request headers, i.e., from the
	client to the server.

	You can only specify known headers for the header name.
	Other headers are reclassified as 'Other'. You can also
	refer to all the headers with 'All'.

	For example, to achieve the same behavior as the old
	'http_anonymizer standard' option, you should use:

		request_header_access From deny all
		request_header_access Referer deny all
		request_header_access Server deny all
		request_header_access User-Agent deny all
		request_header_access WWW-Authenticate deny all
		request_header_access Link deny all

	Or, to reproduce the old 'http_anonymizer paranoid' feature
	you should use:

		request_header_access Allow allow all
		request_header_access Authorization allow all
		request_header_access WWW-Authenticate allow all
		request_header_access Proxy-Authorization allow all
		request_header_access Proxy-Authenticate allow all
		request_header_access Cache-Control allow all
		request_header_access Content-Encoding allow all
		request_header_access Content-Length allow all
		request_header_access Content-Type allow all
		request_header_access Date allow all
		request_header_access Expires allow all
		request_header_access Host allow all
		request_header_access If-Modified-Since allow all
		request_header_access Last-Modified allow all
		request_header_access Location allow all
		request_header_access Pragma allow all
		request_header_access Accept allow all
		request_header_access Accept-Charset allow all
		request_header_access Accept-Encoding allow all
		request_header_access Accept-Language allow all
		request_header_access Content-Language allow all
		request_header_access Mime-Version allow all
		request_header_access Retry-After allow all
		request_header_access Title allow all
		request_header_access Connection allow all
		request_header_access All deny all

	although many of those are HTTP reply headers, and so should be
	controlled with the reply_header_access directive.

	By default, all headers are allowed (no anonymizing is
	performed).
DOC_END

NAME: reply_header_access
IFDEF: USE_HTTP_VIOLATIONS
TYPE: http_header_access[]
LOC: Config.reply_header_access
DEFAULT: none
DOC_START
	Usage: reply_header_access header_name allow|deny [!]aclname ...

	WARNING: Doing this VIOLATES the HTTP standard.  Enabling
	this feature could make you liable for problems which it
	causes.

	This option only applies to reply headers, i.e., from the
	server to the client.

	This is the same as request_header_access, but in the other
	direction.

	This option replaces the old 'anonymize_headers' and the
	older 'http_anonymizer' option with something that is much
	more configurable. This new method creates a list of ACLs
	for each header, allowing you very fine-tuned header
	mangling.

	You can only specify known headers for the header name.
	Other headers are reclassified as 'Other'. You can also
	refer to all the headers with 'All'.

	For example, to achieve the same behavior as the old
	'http_anonymizer standard' option, you should use:

		reply_header_access From deny all
		reply_header_access Referer deny all
		reply_header_access Server deny all
		reply_header_access User-Agent deny all
		reply_header_access WWW-Authenticate deny all
		reply_header_access Link deny all

	Or, to reproduce the old 'http_anonymizer paranoid' feature
	you should use:

		reply_header_access Allow allow all
		reply_header_access Authorization allow all
		reply_header_access WWW-Authenticate allow all
		reply_header_access Proxy-Authorization allow all
		reply_header_access Proxy-Authenticate allow all
		reply_header_access Cache-Control allow all
		reply_header_access Content-Encoding allow all
		reply_header_access Content-Length allow all
		reply_header_access Content-Type allow all
		reply_header_access Date allow all
		reply_header_access Expires allow all
		reply_header_access Host allow all
		reply_header_access If-Modified-Since allow all
		reply_header_access Last-Modified allow all
		reply_header_access Location allow all
		reply_header_access Pragma allow all
		reply_header_access Accept allow all
		reply_header_access Accept-Charset allow all
		reply_header_access Accept-Encoding allow all
		reply_header_access Accept-Language allow all
		reply_header_access Content-Language allow all
		reply_header_access Mime-Version allow all
		reply_header_access Retry-After allow all
		reply_header_access Title allow all
		reply_header_access Connection allow all
		reply_header_access All deny all

	although the HTTP request headers won't be usefully controlled
	by this directive -- see request_header_access for details.

	By default, all headers are allowed (no anonymizing is
	performed).
DOC_END

NAME: request_header_replace header_replace
IFDEF: USE_HTTP_VIOLATIONS
TYPE: http_header_replace[]
LOC: Config.request_header_access
DEFAULT: none
DOC_START
	Usage:   request_header_replace header_name message
	Example: request_header_replace User-Agent Nutscrape/1.0 (CP/M; 8-bit)

	This option allows you to change the contents of headers
	denied with request_header_access above, by replacing them
	with some fixed string. This replaces the old fake_user_agent
	option.

	This only applies to request headers, not reply headers.

	By default, headers are removed if denied.
DOC_END

NAME: reply_header_replace
IFDEF: USE_HTTP_VIOLATIONS
TYPE: http_header_replace[]
LOC: Config.reply_header_access
DEFAULT: none
DOC_START
        Usage:   reply_header_replace header_name message
        Example: reply_header_replace Server Foo/1.0

        This option allows you to change the contents of headers
        denied with reply_header_access above, by replacing them
        with some fixed string.

        This only applies to reply headers, not request headers.

        By default, headers are removed if denied.
DOC_END

NAME: relaxed_header_parser
COMMENT: on|off|warn
TYPE: tristate
LOC: Config.onoff.relaxed_header_parser
DEFAULT: on
DOC_START
	In the default "on" setting Squid accepts certain forms
	of non-compliant HTTP messages where it is unambiguous
	what the sending application intended even if the message
	is not correctly formatted. The messages is then normalized
	to the correct form when forwarded by Squid.

	If set to "warn" then a warning will be emitted in cache.log
	each time such HTTP error is encountered.

	If set to "off" then such HTTP errors will cause the request
	or response to be rejected.
DOC_END

COMMENT_START
 TIMEOUTS
 -----------------------------------------------------------------------------
COMMENT_END

NAME: forward_timeout
COMMENT: time-units
TYPE: time_t
LOC: Config.Timeout.forward
DEFAULT: 4 minutes
DOC_START
	This parameter specifies how long Squid should at most attempt in
	finding a forwarding path for the request before giving up.
DOC_END

NAME: connect_timeout
COMMENT: time-units
TYPE: time_t
LOC: Config.Timeout.connect
DEFAULT: 1 minute
DOC_START
	This parameter specifies how long to wait for the TCP connect to
	the requested server or peer to complete before Squid should
	attempt to find another path where to forward the request.
DOC_END

NAME: peer_connect_timeout
COMMENT: time-units
TYPE: time_t
LOC: Config.Timeout.peer_connect
DEFAULT: 30 seconds
DOC_START
	This parameter specifies how long to wait for a pending TCP
	connection to a peer cache.  The default is 30 seconds.   You
	may also set different timeout values for individual neighbors
	with the 'connect-timeout' option on a 'cache_peer' line.
DOC_END

NAME: read_timeout
COMMENT: time-units
TYPE: time_t
LOC: Config.Timeout.read
DEFAULT: 15 minutes
DOC_START
	The read_timeout is applied on server-side connections.  After
	each successful read(), the timeout will be extended by this
	amount.  If no data is read again after this amount of time,
	the request is aborted and logged with ERR_READ_TIMEOUT.  The
	default is 15 minutes.
DOC_END

NAME: write_timeout
COMMENT: time-units
TYPE: time_t
LOC: Config.Timeout.write
DEFAULT: 15 minutes
DOC_START
	This timeout is tracked for all connections that have data
	available for writing and are waiting for the socket to become
	ready. After each successful write, the timeout is extended by
	the configured amount. If Squid has data to write but the
	connection is not ready for the configured duration, the
	transaction associated with the connection is terminated. The
	default is 15 minutes.
DOC_END

NAME: request_timeout
TYPE: time_t
LOC: Config.Timeout.request
DEFAULT: 5 minutes
DOC_START
	How long to wait for an HTTP request after initial
	connection establishment.
DOC_END

NAME: persistent_request_timeout
TYPE: time_t
LOC: Config.Timeout.persistent_request
DEFAULT: 2 minutes
DOC_START
	How long to wait for the next HTTP request on a persistent
	connection after the previous request completes.
DOC_END

NAME: client_lifetime
COMMENT: time-units
TYPE: time_t
LOC: Config.Timeout.lifetime
DEFAULT: 1 day
DOC_START
	The maximum amount of time a client (browser) is allowed to
	remain connected to the cache process.  This protects the Cache
	from having a lot of sockets (and hence file descriptors) tied up
	in a CLOSE_WAIT state from remote clients that go away without
	properly shutting down (either because of a network failure or
	because of a poor client implementation).  The default is one
	day, 1440 minutes.

	NOTE:  The default value is intended to be much larger than any
	client would ever need to be connected to your cache.  You
	should probably change client_lifetime only as a last resort.
	If you seem to have many client connections tying up
	filedescriptors, we recommend first tuning the read_timeout,
	request_timeout, persistent_request_timeout and quick_abort values.
DOC_END

NAME: half_closed_clients
TYPE: onoff
LOC: Config.onoff.half_closed_clients
DEFAULT: off
DOC_START
	Some clients may shutdown the sending side of their TCP
	connections, while leaving their receiving sides open.	Sometimes,
	Squid can not tell the difference between a half-closed and a
	fully-closed TCP connection.

	By default, Squid will immediately close client connections when
	read(2) returns "no more data to read."

	Change this option to 'on' and Squid will keep open connections
	until a read(2) or write(2) on the socket returns an error.
	This may show some benefits for reverse proxies. But if not
	it is recommended to leave OFF.
DOC_END

NAME: pconn_timeout
TYPE: time_t
LOC: Config.Timeout.pconn
DEFAULT: 1 minute
DOC_START
	Timeout for idle persistent connections to servers and other
	proxies.
DOC_END

NAME: ident_timeout
TYPE: time_t
IFDEF: USE_IDENT
LOC: Ident::TheConfig.timeout
DEFAULT: 10 seconds
DOC_START
	Maximum time to wait for IDENT lookups to complete.

	If this is too high, and you enabled IDENT lookups from untrusted
	users, you might be susceptible to denial-of-service by having
	many ident requests going at once.
DOC_END

NAME: shutdown_lifetime
COMMENT: time-units
TYPE: time_t
LOC: Config.shutdownLifetime
DEFAULT: 30 seconds
DOC_START
	When SIGTERM or SIGHUP is received, the cache is put into
	"shutdown pending" mode until all active sockets are closed.
	This value is the lifetime to set for all open descriptors
	during shutdown mode.  Any active clients after this many
	seconds will receive a 'timeout' message.
DOC_END

COMMENT_START
 ADMINISTRATIVE PARAMETERS
 -----------------------------------------------------------------------------
COMMENT_END

NAME: cache_mgr
TYPE: string
DEFAULT: webmaster
LOC: Config.adminEmail
DOC_START
	Email-address of local cache manager who will receive
	mail if the cache dies.  The default is "webmaster."
DOC_END

NAME: mail_from
TYPE: string
DEFAULT: none
LOC: Config.EmailFrom
DOC_START
	From: email-address for mail sent when the cache dies.
	The default is to use 'appname@unique_hostname'.
	Default appname value is "squid", can be changed into
	src/globals.h before building squid.
DOC_END

NAME: mail_program
TYPE: eol
DEFAULT: mail
LOC: Config.EmailProgram
DOC_START
	Email program used to send mail if the cache dies.
	The default is "mail". The specified program must comply
	with the standard Unix mail syntax:
	  mail-program recipient < mailfile

	Optional command line options can be specified.
DOC_END

NAME: cache_effective_user
TYPE: string
DEFAULT: @DEFAULT_CACHE_EFFECTIVE_USER@
LOC: Config.effectiveUser
DOC_START
	If you start Squid as root, it will change its effective/real
	UID/GID to the user specified below.  The default is to change
	to UID of @DEFAULT_CACHE_EFFECTIVE_USER@.
	see also; cache_effective_group
DOC_END

NAME: cache_effective_group
TYPE: string
DEFAULT: none
LOC: Config.effectiveGroup
DOC_START
	Squid sets the GID to the effective user's default group ID
	(taken from the password file) and supplementary group list
	from the groups membership.

	If you want Squid to run with a specific GID regardless of
	the group memberships of the effective user then set this
	to the group (or GID) you want Squid to run as. When set
	all other group privileges of the effective user are ignored
	and only this GID is effective. If Squid is not started as
	root the user starting Squid MUST be member of the specified
	group.

	This option is not recommended by the Squid Team.
	Our preference is for administrators to configure a secure
	user account for squid with UID/GID matching system policies.
DOC_END

NAME: httpd_suppress_version_string
COMMENT: on|off
TYPE: onoff
DEFAULT: off
LOC: Config.onoff.httpd_suppress_version_string
DOC_START
	Suppress Squid version string info in HTTP headers and HTML error pages.
DOC_END

NAME: visible_hostname
TYPE: string
LOC: Config.visibleHostname
DEFAULT: none
DOC_START
	If you want to present a special hostname in error messages, etc,
	define this.  Otherwise, the return value of gethostname()
	will be used. If you have multiple caches in a cluster and
	get errors about IP-forwarding you must set them to have individual
	names with this setting.
DOC_END

NAME: unique_hostname
TYPE: string
LOC: Config.uniqueHostname
DEFAULT: none
DOC_START
	If you want to have multiple machines with the same
	'visible_hostname' you must give each machine a different
	'unique_hostname' so forwarding loops can be detected.
DOC_END

NAME: hostname_aliases
TYPE: wordlist
LOC: Config.hostnameAliases
DEFAULT: none
DOC_START
	A list of other DNS names your cache has.
DOC_END

NAME: umask
TYPE: int
LOC: Config.umask
DEFAULT: 027
DOC_START
	Minimum umask which should be enforced while the proxy
	is running, in addition to the umask set at startup.

	For a traditional octal representation of umasks, start
        your value with 0.
DOC_END

COMMENT_START
 OPTIONS FOR THE CACHE REGISTRATION SERVICE
 -----------------------------------------------------------------------------

	This section contains parameters for the (optional) cache
	announcement service.  This service is provided to help
	cache administrators locate one another in order to join or
	create cache hierarchies.

	An 'announcement' message is sent (via UDP) to the registration
	service by Squid.  By default, the announcement message is NOT
	SENT unless you enable it with 'announce_period' below.

	The announcement message includes your hostname, plus the
	following information from this configuration file:

		http_port
		icp_port
		cache_mgr

	All current information is processed regularly and made
	available on the Web at http://www.ircache.net/Cache/Tracker/.
COMMENT_END

NAME: announce_period
TYPE: time_t
LOC: Config.Announce.period
DEFAULT: 0
DOC_START
	This is how frequently to send cache announcements.  The
	default is `0' which disables sending the announcement
	messages.

	To enable announcing your cache, just set an announce period.

	Example:
		announce_period 1 day
DOC_END

NAME: announce_host
TYPE: string
DEFAULT: tracker.ircache.net
LOC: Config.Announce.host
DOC_NONE

NAME: announce_file
TYPE: string
DEFAULT: none
LOC: Config.Announce.file
DOC_NONE

NAME: announce_port
TYPE: ushort
DEFAULT: 3131
LOC: Config.Announce.port
DOC_START
	announce_host and announce_port set the hostname and port
	number where the registration message will be sent.

	Hostname will default to 'tracker.ircache.net' and port will
	default default to 3131.  If the 'filename' argument is given,
	the contents of that file will be included in the announce
	message.
DOC_END

COMMENT_START
 HTTPD-ACCELERATOR OPTIONS
 -----------------------------------------------------------------------------
COMMENT_END

NAME: httpd_accel_surrogate_id
TYPE:  string
DEFAULT: none
LOC: Config.Accel.surrogate_id
DOC_START
	Surrogates (http://www.esi.org/architecture_spec_1.0.html)
	need an identification token to allow control targeting. Because
	a farm of surrogates may all perform the same tasks, they may share
	an identification token.

	The default ID is the visible_hostname
DOC_END

NAME: http_accel_surrogate_remote
COMMENT: on|off
TYPE: onoff
DEFAULT: off
LOC: Config.onoff.surrogate_is_remote
DOC_START
	Remote surrogates (such as those in a CDN) honour Surrogate-Control: no-store-remote.
	Set this to on to have squid behave as a remote surrogate.
DOC_END

NAME: esi_parser
IFDEF: USE_SQUID_ESI
COMMENT: libxml2|expat|custom
TYPE: string
LOC: ESIParser::Type
DEFAULT: custom
DOC_START
	ESI markup is not strictly XML compatible. The custom ESI parser
	will give higher performance, but cannot handle non ASCII character
	encodings.
DOC_END

COMMENT_START
 DELAY POOL PARAMETERS
 -----------------------------------------------------------------------------
COMMENT_END

NAME: delay_pools
TYPE: delay_pool_count
DEFAULT: 0
IFDEF: USE_DELAY_POOLS
LOC: Config.Delay
DOC_START
	This represents the number of delay pools to be used.  For example,
	if you have one class 2 delay pool and one class 3 delays pool, you
	have a total of 2 delay pools.
DOC_END

NAME: delay_class
TYPE: delay_pool_class
DEFAULT: none
IFDEF: USE_DELAY_POOLS
LOC: Config.Delay
DOC_START
	This defines the class of each delay pool.  There must be exactly one
	delay_class line for each delay pool.  For example, to define two
	delay pools, one of class 2 and one of class 3, the settings above
	and here would be:

	Example:
	    delay_pools 4      # 4 delay pools
	    delay_class 1 2    # pool 1 is a class 2 pool
	    delay_class 2 3    # pool 2 is a class 3 pool
	    delay_class 3 4    # pool 3 is a class 4 pool
	    delay_class 4 5    # pool 4 is a class 5 pool

	The delay pool classes are:

		class 1		Everything is limited by a single aggregate
				bucket.

		class 2 	Everything is limited by a single aggregate
				bucket as well as an "individual" bucket chosen
				from bits 25 through 32 of the IPv4 address.

		class 3		Everything is limited by a single aggregate
				bucket as well as a "network" bucket chosen
				from bits 17 through 24 of the IP address and a
				"individual" bucket chosen from bits 17 through
				32 of the IPv4 address.

		class 4		Everything in a class 3 delay pool, with an
				additional limit on a per user basis. This
				only takes effect if the username is established
				in advance - by forcing authentication in your
				http_access rules.

		class 5		Requests are grouped according their tag (see
				external_acl's tag= reply).


	Each pool also requires a delay_parameters directive to configure the pool size
	and speed limits used whenever the pool is applied to a request. Along with
	a set of delay_access directives to determine when it is used.

	NOTE: If an IP address is a.b.c.d
		-> bits 25 through 32 are "d"
		-> bits 17 through 24 are "c"
		-> bits 17 through 32 are "c * 256 + d"

	NOTE-2: Due to the use of bitmasks in class 2,3,4 pools they only apply to
		IPv4 traffic. Class 1 and 5 pools may be used with IPv6 traffic.
DOC_END

NAME: delay_access
TYPE: delay_pool_access
DEFAULT: none
IFDEF: USE_DELAY_POOLS
LOC: Config.Delay
DOC_START
	This is used to determine which delay pool a request falls into.

	delay_access is sorted per pool and the matching starts with pool 1,
	then pool 2, ..., and finally pool N. The first delay pool where the
	request is allowed is selected for the request. If it does not allow
	the request to any pool then the request is not delayed (default).

	For example, if you want some_big_clients in delay
	pool 1 and lotsa_little_clients in delay pool 2:

Example:
 delay_access 1 allow some_big_clients
 delay_access 1 deny all
 delay_access 2 allow lotsa_little_clients
 delay_access 2 deny all
 delay_access 3 allow authenticated_clients
DOC_END

NAME: delay_parameters
TYPE: delay_pool_rates
DEFAULT: none
IFDEF: USE_DELAY_POOLS
LOC: Config.Delay
DOC_START
	This defines the parameters for a delay pool.  Each delay pool has
	a number of "buckets" associated with it, as explained in the
	description of delay_class.

	For a class 1 delay pool, the syntax is:
		delay_pools pool 1
		delay_parameters pool aggregate

	For a class 2 delay pool:
		delay_pools pool 2
		delay_parameters pool aggregate individual

	For a class 3 delay pool:
		delay_pools pool 3
		delay_parameters pool aggregate network individual

	For a class 4 delay pool:
		delay_pools pool 4
		delay_parameters pool aggregate network individual user

	For a class 5 delay pool:
		delay_pools pool 5
		delay_parameters pool tagrate

	The option variables are:

		pool		a pool number - ie, a number between 1 and the
				number specified in delay_pools as used in
				delay_class lines.

		aggregate	the speed limit parameters for the aggregate bucket
				(class 1, 2, 3).

		individual	the speed limit parameters for the individual
				buckets (class 2, 3).

		network		the speed limit parameters for the network buckets
				(class 3).

		user		the speed limit parameters for the user buckets
				(class 4).

		tagrate		the speed limit parameters for the tag buckets
				(class 5).

	A pair of delay parameters is written restore/maximum, where restore is
	the number of bytes (not bits - modem and network speeds are usually
	quoted in bits) per second placed into the bucket, and maximum is the
	maximum number of bytes which can be in the bucket at any time.

	There must be one delay_parameters line for each delay pool.


	For example, if delay pool number 1 is a class 2 delay pool as in the
	above example, and is being used to strictly limit each host to 64Kbit/sec
	(plus overheads), with no overall limit, the line is:

		delay_parameters 1 -1/-1 8000/8000

	Note that 8 x 8000 KByte/sec -> 64Kbit/sec.

	Note that the figure -1 is used to represent "unlimited".


	And, if delay pool number 2 is a class 3 delay pool as in the above
	example, and you want to limit it to a total of 256Kbit/sec (strict limit)
	with each 8-bit network permitted 64Kbit/sec (strict limit) and each
	individual host permitted 4800bit/sec with a bucket maximum size of 64Kbits
	to permit a decent web page to be downloaded at a decent speed
	(if the network is not being limited due to overuse) but slow down
	large downloads more significantly:

		delay_parameters 2 32000/32000 8000/8000 600/8000

	Note that 8 x 32000 KByte/sec -> 256Kbit/sec.
		  8 x  8000 KByte/sec ->  64Kbit/sec.
		  8 x   600 Byte/sec  -> 4800bit/sec.


	Finally, for a class 4 delay pool as in the example - each user will
	be limited to 128Kbits/sec no matter how many workstations they are logged into.:

		delay_parameters 4 32000/32000 8000/8000 600/64000 16000/16000
DOC_END

NAME: delay_initial_bucket_level
COMMENT: (percent, 0-100)
TYPE: ushort
DEFAULT: 50
IFDEF: USE_DELAY_POOLS
LOC: Config.Delay.initial
DOC_START
	The initial bucket percentage is used to determine how much is put
	in each bucket when squid starts, is reconfigured, or first notices
	a host accessing it (in class 2 and class 3, individual hosts and
	networks only have buckets associated with them once they have been
	"seen" by squid).
DOC_END

COMMENT_START
 CLIENT DELAY POOL PARAMETERS
 -----------------------------------------------------------------------------
COMMENT_END

NAME: client_delay_pools
TYPE: client_delay_pool_count
DEFAULT: 0
IFDEF: USE_DELAY_POOLS
LOC: Config.ClientDelay
DOC_START
	This option specifies the number of client delay pools used. It must
	preceed other client_delay_* options.

Example:
 client_delay_pools 2
DOC_END

NAME: client_delay_initial_bucket_level
COMMENT: (percent, 0-no_limit)
TYPE: ushort
DEFAULT: 50
IFDEF: USE_DELAY_POOLS
LOC: Config.ClientDelay.initial
DOC_START
	This option determines the initial bucket size as a percentage of
	max_bucket_size from client_delay_parameters. Buckets are created
	at the time of the "first" connection from the matching IP. Idle
	buckets are periodically deleted up.

	You can specify more than 100 percent but note that such "oversized"
	buckets are not refilled until their size goes down to max_bucket_size
	from client_delay_parameters.

Example:
 client_delay_initial_bucket_level 50
DOC_END

NAME: client_delay_parameters
TYPE: client_delay_pool_rates
DEFAULT: none
IFDEF: USE_DELAY_POOLS
LOC: Config.ClientDelay
DOC_START

	This option configures client-side bandwidth limits using the
	following format:

	    client_delay_parameters pool speed_limit max_bucket_size

	pool is an integer ID used for client_delay_access matching.

	speed_limit is bytes added to the bucket per second.

	max_bucket_size is the maximum size of a bucket, enforced after any
	speed_limit additions.

	Please see the delay_parameters option for more information and
	examples.

Example:
 client_delay_parameters 1 1024 2048
 client_delay_parameters 2 51200 16384
DOC_END

NAME: client_delay_access
TYPE: client_delay_pool_access
DEFAULT: none
IFDEF: USE_DELAY_POOLS
LOC: Config.ClientDelay
DOC_START

	This option determines the client-side delay pool for the
	request:

	    client_delay_access pool_ID allow|deny acl_name

	All client_delay_access options are checked in their pool ID
	order, starting with pool 1. The first checked pool with allowed
	request is selected for the request. If no ACL matches or there
	are no client_delay_access options, the request bandwidth is not
	limited.

	The ACL-selected pool is then used to find the
	client_delay_parameters for the request. Client-side pools are
	not used to aggregate clients. Clients are always aggregated
	based on their source IP addresses (one bucket per source IP).

	Please see delay_access for more examples.

Example:
 client_delay_access 1 allow low_rate_network
 client_delay_access 2 allow vips_network
DOC_END

COMMENT_START
 WCCPv1 AND WCCPv2 CONFIGURATION OPTIONS
 -----------------------------------------------------------------------------
COMMENT_END

NAME: wccp_router
TYPE: address
LOC: Config.Wccp.router
DEFAULT: any_addr
IFDEF: USE_WCCP
DOC_START
	Use this option to define your WCCP ``home'' router for
	Squid.

	wccp_router supports a single WCCP(v1) router

	wccp2_router supports multiple WCCPv2 routers

	only one of the two may be used at the same time and defines
	which version of WCCP to use.
DOC_END

NAME: wccp2_router
TYPE: IpAddress_list
LOC: Config.Wccp2.router
DEFAULT: none
IFDEF: USE_WCCPv2
DOC_START
	Use this option to define your WCCP ``home'' router for
	Squid.

	wccp_router supports a single WCCP(v1) router

	wccp2_router supports multiple WCCPv2 routers

	only one of the two may be used at the same time and defines
	which version of WCCP to use.
DOC_END

NAME: wccp_version
TYPE: int
LOC: Config.Wccp.version
DEFAULT: 4
IFDEF: USE_WCCP
DOC_START
	This directive is only relevant if you need to set up WCCP(v1)
	to some very old and end-of-life Cisco routers. In all other
	setups it must be left unset or at the default setting.
	It defines an internal version in the WCCP(v1) protocol,
	with version 4 being the officially documented protocol.

	According to some users, Cisco IOS 11.2 and earlier only
	support WCCP version 3.  If you're using that or an earlier
	version of IOS, you may need to change this value to 3, otherwise
	do not specify this parameter.
DOC_END

NAME: wccp2_rebuild_wait
TYPE: onoff
LOC: Config.Wccp2.rebuildwait
DEFAULT: on
IFDEF: USE_WCCPv2
DOC_START
	If this is enabled Squid will wait for the cache dir rebuild to finish
	before sending the first wccp2 HereIAm packet
DOC_END

NAME: wccp2_forwarding_method
TYPE: wccp2_method
LOC: Config.Wccp2.forwarding_method
DEFAULT: gre
IFDEF: USE_WCCPv2
DOC_START
	WCCP2 allows the setting of forwarding methods between the
	router/switch and the cache.  Valid values are as follows:

	gre - GRE encapsulation (forward the packet in a GRE/WCCP tunnel)
	l2  - L2 redirect (forward the packet using Layer 2/MAC rewriting)

	Currently (as of IOS 12.4) cisco routers only support GRE.
	Cisco switches only support the L2 redirect assignment method.
DOC_END

NAME: wccp2_return_method
TYPE: wccp2_method
LOC: Config.Wccp2.return_method
DEFAULT: gre
IFDEF: USE_WCCPv2
DOC_START
	WCCP2 allows the setting of return methods between the
	router/switch and the cache for packets that the cache
	decides not to handle.  Valid values are as follows:

	gre - GRE encapsulation (forward the packet in a GRE/WCCP tunnel)
	l2  - L2 redirect (forward the packet using Layer 2/MAC rewriting)

	Currently (as of IOS 12.4) cisco routers only support GRE.
	Cisco switches only support the L2 redirect assignment.

	If the "ip wccp redirect exclude in" command has been
	enabled on the cache interface, then it is still safe for
	the proxy server to use a l2 redirect method even if this
	option is set to GRE.
DOC_END

NAME: wccp2_assignment_method
TYPE: wccp2_amethod
LOC: Config.Wccp2.assignment_method
DEFAULT: hash
IFDEF: USE_WCCPv2
DOC_START
	WCCP2 allows the setting of methods to assign the WCCP hash
	Valid values are as follows:

	hash - Hash assignment
	mask - Mask assignment

	As a general rule, cisco routers support the hash assignment method
	and cisco switches support the mask assignment method.
DOC_END

NAME: wccp2_service
TYPE: wccp2_service
LOC: Config.Wccp2.info
DEFAULT_IF_NONE: standard 0
IFDEF: USE_WCCPv2
DOC_START
	WCCP2 allows for multiple traffic services. There are two
	types: "standard" and "dynamic". The standard type defines
	one service id - http (id 0). The dynamic service ids can be from
	51 to 255 inclusive.  In order to use a dynamic service id
	one must define the type of traffic to be redirected; this is done
	using the wccp2_service_info option.

	The "standard" type does not require a wccp2_service_info option,
	just specifying the service id will suffice.

	MD5 service authentication can be enabled by adding
	"password=<password>" to the end of this service declaration.

	Examples:

	wccp2_service standard 0	# for the 'web-cache' standard service
	wccp2_service dynamic 80	# a dynamic service type which will be
					# fleshed out with subsequent options.
	wccp2_service standard 0 password=foo
DOC_END

NAME: wccp2_service_info
TYPE: wccp2_service_info
LOC: Config.Wccp2.info
DEFAULT: none
IFDEF: USE_WCCPv2
DOC_START
	Dynamic WCCPv2 services require further information to define the
	traffic you wish to have diverted.

	The format is:

	wccp2_service_info <id> protocol=<protocol> flags=<flag>,<flag>..
	    priority=<priority> ports=<port>,<port>..

	The relevant WCCPv2 flags:
	+ src_ip_hash, dst_ip_hash
	+ source_port_hash, dst_port_hash
	+ src_ip_alt_hash, dst_ip_alt_hash
	+ src_port_alt_hash, dst_port_alt_hash
	+ ports_source

	The port list can be one to eight entries.

	Example:

	wccp2_service_info 80 protocol=tcp flags=src_ip_hash,ports_source
	    priority=240 ports=80

	Note: the service id must have been defined by a previous
	'wccp2_service dynamic <id>' entry.
DOC_END

NAME: wccp2_weight
TYPE: int
LOC: Config.Wccp2.weight
DEFAULT: 10000
IFDEF: USE_WCCPv2
DOC_START
	Each cache server gets assigned a set of the destination
	hash proportional to their weight.
DOC_END

NAME: wccp_address
TYPE: address
LOC: Config.Wccp.address
DEFAULT: 0.0.0.0
IFDEF: USE_WCCP
DOC_NONE

NAME: wccp2_address
TYPE: address
LOC: Config.Wccp2.address
DEFAULT: 0.0.0.0
IFDEF: USE_WCCPv2
DOC_START
	Use this option if you require WCCP to use a specific
	interface address.

	The default behavior is to not bind to any specific address.
DOC_END

COMMENT_START
 PERSISTENT CONNECTION HANDLING
 -----------------------------------------------------------------------------

 Also see "pconn_timeout" in the TIMEOUTS section
COMMENT_END

NAME: client_persistent_connections
TYPE: onoff
LOC: Config.onoff.client_pconns
DEFAULT: on
DOC_NONE

NAME: server_persistent_connections
TYPE: onoff
LOC: Config.onoff.server_pconns
DEFAULT: on
DOC_START
	Persistent connection support for clients and servers.  By
	default, Squid uses persistent connections (when allowed)
	with its clients and servers.  You can use these options to
	disable persistent connections with clients and/or servers.
DOC_END

NAME: persistent_connection_after_error
TYPE: onoff
LOC: Config.onoff.error_pconns
DEFAULT: on
DOC_START
	With this directive the use of persistent connections after
	HTTP errors can be disabled. Useful if you have clients
	who fail to handle errors on persistent connections proper.
DOC_END

NAME: detect_broken_pconn
TYPE: onoff
LOC: Config.onoff.detect_broken_server_pconns
DEFAULT: off
DOC_START
	Some servers have been found to incorrectly signal the use
	of HTTP/1.0 persistent connections even on replies not
	compatible, causing significant delays. This server problem
	has mostly been seen on redirects.

	By enabling this directive Squid attempts to detect such
	broken replies and automatically assume the reply is finished
	after 10 seconds timeout.
DOC_END

COMMENT_START
 CACHE DIGEST OPTIONS
 -----------------------------------------------------------------------------
COMMENT_END

NAME: digest_generation
IFDEF: USE_CACHE_DIGESTS
TYPE: onoff
LOC: Config.onoff.digest_generation
DEFAULT: on
DOC_START
	This controls whether the server will generate a Cache Digest
	of its contents.  By default, Cache Digest generation is
	enabled if Squid is compiled with --enable-cache-digests defined.
DOC_END

NAME: digest_bits_per_entry
IFDEF: USE_CACHE_DIGESTS
TYPE: int
LOC: Config.digest.bits_per_entry
DEFAULT: 5
DOC_START
	This is the number of bits of the server's Cache Digest which
	will be associated with the Digest entry for a given HTTP
	Method and URL (public key) combination.  The default is 5.
DOC_END

NAME: digest_rebuild_period
IFDEF: USE_CACHE_DIGESTS
COMMENT: (seconds)
TYPE: time_t
LOC: Config.digest.rebuild_period
DEFAULT: 1 hour
DOC_START
	This is the wait time between Cache Digest rebuilds.
DOC_END

NAME: digest_rewrite_period
COMMENT: (seconds)
IFDEF: USE_CACHE_DIGESTS
TYPE: time_t
LOC: Config.digest.rewrite_period
DEFAULT: 1 hour
DOC_START
	This is the wait time between Cache Digest writes to
	disk.
DOC_END

NAME: digest_swapout_chunk_size
COMMENT: (bytes)
TYPE: b_size_t
IFDEF: USE_CACHE_DIGESTS
LOC: Config.digest.swapout_chunk_size
DEFAULT: 4096 bytes
DOC_START
	This is the number of bytes of the Cache Digest to write to
	disk at a time.  It defaults to 4096 bytes (4KB), the Squid
	default swap page.
DOC_END

NAME: digest_rebuild_chunk_percentage
COMMENT: (percent, 0-100)
IFDEF: USE_CACHE_DIGESTS
TYPE: int
LOC: Config.digest.rebuild_chunk_percentage
DEFAULT: 10
DOC_START
	This is the percentage of the Cache Digest to be scanned at a
	time.  By default it is set to 10% of the Cache Digest.
DOC_END

COMMENT_START
 SNMP OPTIONS
 -----------------------------------------------------------------------------
COMMENT_END

NAME: snmp_port
TYPE: ushort
LOC: Config.Port.snmp
DEFAULT: 0
IFDEF: SQUID_SNMP
DOC_START
	The port number where Squid listens for SNMP requests. To enable
	SNMP support set this to a suitable port number. Port number
	3401 is often used for the Squid SNMP agent. By default it's
	set to "0" (disabled)

	Example:
		snmp_port 3401
DOC_END

NAME: snmp_access
TYPE: acl_access
LOC: Config.accessList.snmp
DEFAULT_IF_NONE: deny all
IFDEF: SQUID_SNMP
DOC_START
	Allowing or denying access to the SNMP port.

	All access to the agent is denied by default.
	usage:

	snmp_access allow|deny [!]aclname ...

	This clause only supports fast acl types.
	See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
Example:
 snmp_access allow snmppublic localhost
 snmp_access deny all
DOC_END

NAME: snmp_incoming_address
TYPE: address
LOC: Config.Addrs.snmp_incoming
DEFAULT: any_addr
IFDEF: SQUID_SNMP
DOC_NONE

NAME: snmp_outgoing_address
TYPE: address
LOC: Config.Addrs.snmp_outgoing
DEFAULT: no_addr
IFDEF: SQUID_SNMP
DOC_START
	Just like 'udp_incoming_address', but for the SNMP port.

	snmp_incoming_address	is used for the SNMP socket receiving
				messages from SNMP agents.
	snmp_outgoing_address	is used for SNMP packets returned to SNMP
				agents.

	The default snmp_incoming_address is to listen on all
	available network interfaces.

	If snmp_outgoing_address is not set it will use the same socket
	as snmp_incoming_address. Only change this if you want to have
	SNMP replies sent using another address than where this Squid
	listens for SNMP queries.

	NOTE, snmp_incoming_address and snmp_outgoing_address can not have
	the same value since they both use port 3401.
DOC_END

COMMENT_START
 ICP OPTIONS
 -----------------------------------------------------------------------------
COMMENT_END

NAME: icp_port udp_port
TYPE: ushort
DEFAULT: 0
LOC: Config.Port.icp
DOC_START
	The port number where Squid sends and receives ICP queries to
	and from neighbor caches.  The standard UDP port for ICP is 3130.
	Default is disabled (0).

	Example:
		icp_port @DEFAULT_ICP_PORT@
DOC_END

NAME: htcp_port
IFDEF: USE_HTCP
TYPE: ushort
DEFAULT: 0
LOC: Config.Port.htcp
DOC_START
	The port number where Squid sends and receives HTCP queries to
	and from neighbor caches.  To turn it on you want to set it to
	4827. By default it is set to "0" (disabled).

	Example:
		htcp_port 4827
DOC_END

NAME: log_icp_queries
COMMENT: on|off
TYPE: onoff
DEFAULT: on
LOC: Config.onoff.log_udp
DOC_START
	If set, ICP queries are logged to access.log. You may wish
	do disable this if your ICP load is VERY high to speed things
	up or to simplify log analysis.
DOC_END

NAME: udp_incoming_address
TYPE: address
LOC:Config.Addrs.udp_incoming
DEFAULT: any_addr
DOC_START
	udp_incoming_address	is used for UDP packets received from other
				caches.

	The default behavior is to not bind to any specific address.

	Only change this if you want to have all UDP queries received on
	a specific interface/address.

	NOTE: udp_incoming_address is used by the ICP, HTCP, and DNS
	modules. Altering it will affect all of them in the same manner.

	see also; udp_outgoing_address

	NOTE, udp_incoming_address and udp_outgoing_address can not
	have the same value since they both use the same port.
DOC_END

NAME: udp_outgoing_address
TYPE: address
LOC: Config.Addrs.udp_outgoing
DEFAULT: no_addr
DOC_START
	udp_outgoing_address	is used for UDP packets sent out to other
				caches.

	The default behavior is to not bind to any specific address.

	Instead it will use the same socket as udp_incoming_address.
	Only change this if you want to have UDP queries sent using another
	address than where this Squid listens for UDP queries from other
	caches.

	NOTE: udp_outgoing_address is used by the ICP, HTCP, and DNS
	modules. Altering it will affect all of them in the same manner.

	see also; udp_incoming_address

	NOTE, udp_incoming_address and udp_outgoing_address can not
	have the same value since they both use the same port.
DOC_END

NAME: icp_hit_stale
COMMENT: on|off
TYPE: onoff
DEFAULT: off
LOC: Config.onoff.icp_hit_stale
DOC_START
	If you want to return ICP_HIT for stale cache objects, set this
	option to 'on'.  If you have sibling relationships with caches
	in other administrative domains, this should be 'off'.  If you only
	have sibling relationships with caches under your control,
	it is probably okay to set this to 'on'.
	If set to 'on', your siblings should use the option "allow-miss"
	on their cache_peer lines for connecting to you.
DOC_END

NAME: minimum_direct_hops
TYPE: int
DEFAULT: 4
LOC: Config.minDirectHops
DOC_START
	If using the ICMP pinging stuff, do direct fetches for sites
	which are no more than this many hops away.
DOC_END

NAME: minimum_direct_rtt
TYPE: int
DEFAULT: 400
LOC: Config.minDirectRtt
DOC_START
	If using the ICMP pinging stuff, do direct fetches for sites
	which are no more than this many rtt milliseconds away.
DOC_END

NAME: netdb_low
TYPE: int
DEFAULT: 900
LOC: Config.Netdb.low
DOC_NONE

NAME: netdb_high
TYPE: int
DEFAULT: 1000
LOC: Config.Netdb.high
DOC_START
	The low and high water marks for the ICMP measurement
	database.  These are counts, not percents.  The defaults are
	900 and 1000.  When the high water mark is reached, database
	entries will be deleted until the low mark is reached.
DOC_END

NAME: netdb_ping_period
TYPE: time_t
LOC: Config.Netdb.period
DEFAULT: 5 minutes
DOC_START
	The minimum period for measuring a site.  There will be at
	least this much delay between successive pings to the same
	network.  The default is five minutes.
DOC_END

NAME: query_icmp
COMMENT: on|off
TYPE: onoff
DEFAULT: off
LOC: Config.onoff.query_icmp
DOC_START
	If you want to ask your peers to include ICMP data in their ICP
	replies, enable this option.

	If your peer has configured Squid (during compilation) with
	'--enable-icmp' that peer will send ICMP pings to origin server
	sites of the URLs it receives.  If you enable this option the
	ICP replies from that peer will include the ICMP data (if available).
	Then, when choosing a parent cache, Squid will choose the parent with
	the minimal RTT to the origin server.  When this happens, the
	hierarchy field of the access.log will be
	"CLOSEST_PARENT_MISS".  This option is off by default.
DOC_END

NAME: test_reachability
COMMENT: on|off
TYPE: onoff
DEFAULT: off
LOC: Config.onoff.test_reachability
DOC_START
	When this is 'on', ICP MISS replies will be ICP_MISS_NOFETCH
	instead of ICP_MISS if the target host is NOT in the ICMP
	database, or has a zero RTT.
DOC_END

NAME: icp_query_timeout
COMMENT: (msec)
DEFAULT: 0
TYPE: int
LOC: Config.Timeout.icp_query
DOC_START
	Normally Squid will automatically determine an optimal ICP
	query timeout value based on the round-trip-time of recent ICP
	queries.  If you want to override the value determined by
	Squid, set this 'icp_query_timeout' to a non-zero value.  This
	value is specified in MILLISECONDS, so, to use a 2-second
	timeout (the old default), you would write:

		icp_query_timeout 2000
DOC_END

NAME: maximum_icp_query_timeout
COMMENT: (msec)
DEFAULT: 2000
TYPE: int
LOC: Config.Timeout.icp_query_max
DOC_START
	Normally the ICP query timeout is determined dynamically.  But
	sometimes it can lead to very large values (say 5 seconds).
	Use this option to put an upper limit on the dynamic timeout
	value.  Do NOT use this option to always use a fixed (instead
	of a dynamic) timeout value. To set a fixed timeout see the
	'icp_query_timeout' directive.
DOC_END

NAME: minimum_icp_query_timeout
COMMENT: (msec)
DEFAULT: 5
TYPE: int
LOC: Config.Timeout.icp_query_min
DOC_START
	Normally the ICP query timeout is determined dynamically.  But
	sometimes it can lead to very small timeouts, even lower than
	the normal latency variance on your link due to traffic.
	Use this option to put an lower limit on the dynamic timeout
	value.  Do NOT use this option to always use a fixed (instead
	of a dynamic) timeout value. To set a fixed timeout see the
	'icp_query_timeout' directive.
DOC_END

NAME: background_ping_rate
COMMENT: time-units
TYPE: time_t
DEFAULT: 10 seconds
LOC: Config.backgroundPingRate
DOC_START
	Controls how often the ICP pings are sent to siblings that
	have background-ping set.
DOC_END

COMMENT_START
 MULTICAST ICP OPTIONS
 -----------------------------------------------------------------------------
COMMENT_END

NAME: mcast_groups
TYPE: wordlist
LOC: Config.mcast_group_list
DEFAULT: none
DOC_START
	This tag specifies a list of multicast groups which your server
	should join to receive multicasted ICP queries.

	NOTE!  Be very careful what you put here!  Be sure you
	understand the difference between an ICP _query_ and an ICP
	_reply_.  This option is to be set only if you want to RECEIVE
	multicast queries.  Do NOT set this option to SEND multicast
	ICP (use cache_peer for that).  ICP replies are always sent via
	unicast, so this option does not affect whether or not you will
	receive replies from multicast group members.

	You must be very careful to NOT use a multicast address which
	is already in use by another group of caches.

	If you are unsure about multicast, please read the Multicast
	chapter in the Squid FAQ (http://www.squid-cache.org/FAQ/).

	Usage: mcast_groups 239.128.16.128 224.0.1.20

	By default, Squid doesn't listen on any multicast groups.
DOC_END

NAME: mcast_miss_addr
IFDEF: MULTICAST_MISS_STREAM
TYPE: address
LOC: Config.mcast_miss.addr
DEFAULT: no_addr
DOC_START
	If you enable this option, every "cache miss" URL will
	be sent out on the specified multicast address.

	Do not enable this option unless you are are absolutely
	certain you understand what you are doing.
DOC_END

NAME: mcast_miss_ttl
IFDEF: MULTICAST_MISS_STREAM
TYPE: ushort
LOC: Config.mcast_miss.ttl
DEFAULT: 16
DOC_START
	This is the time-to-live value for packets multicasted
	when multicasting off cache miss URLs is enabled.  By
	default this is set to 'site scope', i.e. 16.
DOC_END

NAME: mcast_miss_port
IFDEF: MULTICAST_MISS_STREAM
TYPE: ushort
LOC: Config.mcast_miss.port
DEFAULT: 3135
DOC_START
	This is the port number to be used in conjunction with
	'mcast_miss_addr'.
DOC_END

NAME: mcast_miss_encode_key
IFDEF: MULTICAST_MISS_STREAM
TYPE: string
LOC: Config.mcast_miss.encode_key
DEFAULT: XXXXXXXXXXXXXXXX
DOC_START
	The URLs that are sent in the multicast miss stream are
	encrypted.  This is the encryption key.
DOC_END

NAME: mcast_icp_query_timeout
COMMENT: (msec)
DEFAULT: 2000
TYPE: int
LOC: Config.Timeout.mcast_icp_query
DOC_START
	For multicast peers, Squid regularly sends out ICP "probes" to
	count how many other peers are listening on the given multicast
	address.  This value specifies how long Squid should wait to
	count all the replies.  The default is 2000 msec, or 2
	seconds.
DOC_END

COMMENT_START
 INTERNAL ICON OPTIONS
 -----------------------------------------------------------------------------
COMMENT_END

NAME: icon_directory
TYPE: string
LOC: Config.icons.directory
DEFAULT: @DEFAULT_ICON_DIR@
DOC_START
	Where the icons are stored. These are normally kept in
	@DEFAULT_ICON_DIR@
DOC_END

NAME: global_internal_static
TYPE: onoff
LOC: Config.onoff.global_internal_static
DEFAULT: on
DOC_START
	This directive controls is Squid should intercept all requests for
	/squid-internal-static/ no matter which host the URL is requesting
	(default on setting), or if nothing special should be done for
	such URLs (off setting). The purpose of this directive is to make
	icons etc work better in complex cache hierarchies where it may
	not always be possible for all corners in the cache mesh to reach
	the server generating a directory listing.
DOC_END

NAME: short_icon_urls
TYPE: onoff
LOC: Config.icons.use_short_names
DEFAULT: on
DOC_START
	If this is enabled Squid will use short URLs for icons.
	If disabled it will revert to the old behavior of including
	it's own name and port in the URL.

	If you run a complex cache hierarchy with a mix of Squid and
	other proxies you may need to disable this directive.
DOC_END

COMMENT_START
 ERROR PAGE OPTIONS
 -----------------------------------------------------------------------------
COMMENT_END

NAME: error_directory
TYPE: string
LOC: Config.errorDirectory
DEFAULT: none
DOC_START
	If you wish to create your own versions of the default
	error files to customize them to suit your company copy
	the error/template files to another directory and point
	this tag at them.

	WARNING: This option will disable multi-language support
	         on error pages if used.

	The squid developers are interested in making squid available in
	a wide variety of languages. If you are making translations for a
	language that Squid does not currently provide please consider
	contributing your translation back to the project.
	http://wiki.squid-cache.org/Translations

	The squid developers working on translations are happy to supply drop-in
	translated error files in exchange for any new language contributions.
DOC_END

NAME: error_default_language
IFDEF: USE_ERR_LOCALES
TYPE: string
LOC: Config.errorDefaultLanguage
DEFAULT: none
DOC_START
	Set the default language which squid will send error pages in
	if no existing translation matches the clients language
	preferences.

	If unset (default) generic English will be used.

	The squid developers are interested in making squid available in
	a wide variety of languages. If you are interested in making
	translations for any language see the squid wiki for details.
	http://wiki.squid-cache.org/Translations
DOC_END

NAME: error_log_languages
IFDEF: USE_ERR_LOCALES
TYPE: onoff
LOC: Config.errorLogMissingLanguages
DEFAULT: on
DOC_START
	Log to cache.log what languages users are attempting to
	auto-negotiate for translations.

	Successful negotiations are not logged. Only failures
	have meaning to indicate that Squid may need an upgrade
	of its error page translations.
DOC_END

NAME: err_page_stylesheet
TYPE: string
LOC: Config.errorStylesheet
DEFAULT: @DEFAULT_CONFIG_DIR@/errorpage.css
DOC_START
	CSS Stylesheet to pattern the display of Squid default error pages.

	For information on CSS see http://www.w3.org/Style/CSS/
DOC_END

NAME: err_html_text
TYPE: eol
LOC: Config.errHtmlText
DEFAULT: none
DOC_START
	HTML text to include in error messages.  Make this a "mailto"
	URL to your admin address, or maybe just a link to your
	organizations Web page.

	To include this in your error messages, you must rewrite
	the error template files (found in the "errors" directory).
	Wherever you want the 'err_html_text' line to appear,
	insert a %L tag in the error template file.
DOC_END

NAME: email_err_data
COMMENT: on|off
TYPE: onoff
LOC: Config.onoff.emailErrData
DEFAULT: on
DOC_START
	If enabled, information about the occurred error will be
	included in the mailto links of the ERR pages (if %W is set)
	so that the email body contains the data.
	Syntax is <A HREF="mailto:%w%W">%w</A>
DOC_END

NAME: deny_info
TYPE: denyinfo
LOC: Config.denyInfoList
DEFAULT: none
DOC_START
	Usage:   deny_info err_page_name acl
	or       deny_info http://... acl
	or       deny_info TCP_RESET acl

	This can be used to return a ERR_ page for requests which
	do not pass the 'http_access' rules.  Squid remembers the last
	acl it evaluated in http_access, and if a 'deny_info' line exists
	for that ACL Squid returns a corresponding error page.

	The acl is typically the last acl on the http_access deny line which
	denied access. The exceptions to this rule are:
	- When Squid needs to request authentication credentials. It's then
	  the first authentication related acl encountered
	- When none of the http_access lines matches. It's then the last
	  acl processed on the last http_access line.
	- When the decision to deny access was made by an adaptation service,
	  the acl name is the corresponding eCAP or ICAP service_name.

	NP: If providing your own custom error pages with error_directory
	    you may also specify them by your custom file name:
	    Example: deny_info ERR_CUSTOM_ACCESS_DENIED bad_guys

	By defaut Squid will send "403 Forbidden". A different 4xx or 5xx
	may be specified by prefixing the file name with the code and a colon.
	e.g. 404:ERR_CUSTOM_ACCESS_DENIED

	Alternatively you can tell Squid to reset the TCP connection
	by specifying TCP_RESET.

	Or you can specify an error URL or URL pattern. The browsers will
	get redirected to the specified URL after formatting tags have
	been replaced. Redirect will be done with 302 or 307 according to
	HTTP/1.1 specs. A different 3xx code may be specified by prefixing
	the URL. e.g. 303:http://example.com/

	URL FORMAT TAGS:
		%a	- username (if available. Password NOT included)
		%B	- FTP path URL
		%e	- Error number
		%E	- Error description
		%h	- Squid hostname
		%H	- Request domain name
		%i	- Client IP Address
		%M	- Request Method
		%o	- Message result from external ACL helper
		%p	- Request Port number
		%P	- Request Protocol name
		%R	- Request URL path
		%T	- Timestamp in RFC 1123 format
		%U	- Full canonical URL from client
			  (HTTPS URLs terminate with *)
		%u	- Full canonical URL from client
		%w	- Admin email from squid.conf
		%x	- Error name
		%%	- Literal percent (%) code

DOC_END

COMMENT_START
 OPTIONS INFLUENCING REQUEST FORWARDING 
 -----------------------------------------------------------------------------
COMMENT_END

NAME: nonhierarchical_direct
TYPE: onoff
LOC: Config.onoff.nonhierarchical_direct
DEFAULT: on
DOC_START
	By default, Squid will send any non-hierarchical requests
	(matching hierarchy_stoplist or not cacheable request type) direct
	to origin servers.

	If you set this to off, Squid will prefer to send these
	requests to parents.

	Note that in most configurations, by turning this off you will only
	add latency to these request without any improvement in global hit
	ratio.

	If you are inside an firewall see never_direct instead of
	this directive.
DOC_END

NAME: prefer_direct
TYPE: onoff
LOC: Config.onoff.prefer_direct
DEFAULT: off
DOC_START
	Normally Squid tries to use parents for most requests. If you for some
	reason like it to first try going direct and only use a parent if
	going direct fails set this to on.

	By combining nonhierarchical_direct off and prefer_direct on you
	can set up Squid to use a parent as a backup path if going direct
	fails.

	Note: If you want Squid to use parents for all requests see
	the never_direct directive. prefer_direct only modifies how Squid
	acts on cacheable requests.
DOC_END

NAME: always_direct
TYPE: acl_access
LOC: Config.accessList.AlwaysDirect
DEFAULT: none
DOC_START
	Usage: always_direct allow|deny [!]aclname ...

	Here you can use ACL elements to specify requests which should
	ALWAYS be forwarded by Squid to the origin servers without using
	any peers.  For example, to always directly forward requests for
	local servers ignoring any parents or siblings you may have use
	something like:

		acl local-servers dstdomain my.domain.net
		always_direct allow local-servers

	To always forward FTP requests directly, use

		acl FTP proto FTP
		always_direct allow FTP

	NOTE: There is a similar, but opposite option named
	'never_direct'.  You need to be aware that "always_direct deny
	foo" is NOT the same thing as "never_direct allow foo".  You
	may need to use a deny rule to exclude a more-specific case of
	some other rule.  Example:

		acl local-external dstdomain external.foo.net
		acl local-servers dstdomain  .foo.net
		always_direct deny local-external
		always_direct allow local-servers

	NOTE: If your goal is to make the client forward the request
	directly to the origin server bypassing Squid then this needs
	to be done in the client configuration. Squid configuration
	can only tell Squid how Squid should fetch the object.

	NOTE: This directive is not related to caching. The replies
	is cached as usual even if you use always_direct. To not cache
	the replies see the 'cache' directive.

	This clause supports both fast and slow acl types.
	See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
DOC_END

NAME: never_direct
TYPE: acl_access
LOC: Config.accessList.NeverDirect
DEFAULT: none
DOC_START
	Usage: never_direct allow|deny [!]aclname ...

	never_direct is the opposite of always_direct.  Please read
	the description for always_direct if you have not already.

	With 'never_direct' you can use ACL elements to specify
	requests which should NEVER be forwarded directly to origin
	servers.  For example, to force the use of a proxy for all
	requests, except those in your local domain use something like:

		acl local-servers dstdomain .foo.net
		never_direct deny local-servers
		never_direct allow all

	or if Squid is inside a firewall and there are local intranet
	servers inside the firewall use something like:

		acl local-intranet dstdomain .foo.net
		acl local-external dstdomain external.foo.net
		always_direct deny local-external
		always_direct allow local-intranet
		never_direct allow all

	This clause supports both fast and slow acl types.
	See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
DOC_END

COMMENT_START
 ADVANCED NETWORKING OPTIONS
 -----------------------------------------------------------------------------
COMMENT_END

NAME: incoming_icp_average
TYPE: int
DEFAULT: 6
LOC: Config.comm_incoming.icp_average
DOC_NONE

NAME: incoming_http_average
TYPE: int
DEFAULT: 4
LOC: Config.comm_incoming.http_average
DOC_NONE

NAME: incoming_dns_average
TYPE: int
DEFAULT: 4
LOC: Config.comm_incoming.dns_average
DOC_NONE

NAME: min_icp_poll_cnt
TYPE: int
DEFAULT: 8
LOC: Config.comm_incoming.icp_min_poll
DOC_NONE

NAME: min_dns_poll_cnt
TYPE: int
DEFAULT: 8
LOC: Config.comm_incoming.dns_min_poll
DOC_NONE

NAME: min_http_poll_cnt
TYPE: int
DEFAULT: 8
LOC: Config.comm_incoming.http_min_poll
DOC_START
	Heavy voodoo here.  I can't even believe you are reading this.
	Are you crazy?  Don't even think about adjusting these unless
	you understand the algorithms in comm_select.c first!
DOC_END

NAME: accept_filter
TYPE: string
DEFAULT: none
LOC: Config.accept_filter
DOC_START
	FreeBSD:

	The name of an accept(2) filter to install on Squid's
	listen socket(s).  This feature is perhaps specific to
	FreeBSD and requires support in the kernel.

	The 'httpready' filter delays delivering new connections
	to Squid until a full HTTP request has been received.
	See the accf_http(9) man page for details.

	The 'dataready' filter delays delivering new connections
	to Squid until there is some data to process.
	See the accf_dataready(9) man page for details.

	Linux:
	
	The 'data' filter delays delivering of new connections
	to Squid until there is some data to process by TCP_ACCEPT_DEFER.
	You may optionally specify a number of seconds to wait by
	'data=N' where N is the number of seconds. Defaults to 30
	if not specified.  See the tcp(7) man page for details.
EXAMPLE:
# FreeBSD
accept_filter httpready
# Linux
accept_filter data
DOC_END

NAME: client_ip_max_connections
TYPE: int
LOC: Config.client_ip_max_connections
DEFAULT: -1
DOC_START
	Set an absolute limit on the number of connections a single
	client IP can use. Any more than this and Squid will begin to drop
	new connections from the client until it closes some links.

	Note that this is a global limit. It affects all HTTP, HTCP, Gopher and FTP
	connections from the client. For finer control use the ACL access controls.

	Requires client_db to be enabled (the default).

	WARNING: This may noticably slow down traffic received via external proxies
	or NAT devices and cause them to rebound error messages back to their clients.
DOC_END

NAME: tcp_recv_bufsize
COMMENT: (bytes)
TYPE: b_size_t
DEFAULT: 0 bytes
LOC: Config.tcpRcvBufsz
DOC_START
	Size of receive buffer to set for TCP sockets.  Probably just
	as easy to change your kernel's default.  Set to zero to use
	the default buffer size.
DOC_END

COMMENT_START
 ICAP OPTIONS
 -----------------------------------------------------------------------------
COMMENT_END

NAME: icap_enable
TYPE: onoff
IFDEF: ICAP_CLIENT
COMMENT: on|off
LOC: Adaptation::Icap::TheConfig.onoff
DEFAULT: off
DOC_START
	If you want to enable the ICAP module support, set this to on.
DOC_END

NAME: icap_connect_timeout
TYPE: time_t
DEFAULT: none
LOC: Adaptation::Icap::TheConfig.connect_timeout_raw
IFDEF: ICAP_CLIENT
DOC_START
	This parameter specifies how long to wait for the TCP connect to
	the requested ICAP server to complete before giving up and either
	terminating the HTTP transaction or bypassing the failure.

	The default for optional services is peer_connect_timeout.
	The default for essential services is connect_timeout.
	If this option is explicitly set, its value applies to all services.
DOC_END

NAME: icap_io_timeout
COMMENT: time-units
TYPE: time_t
DEFAULT: none
LOC: Adaptation::Icap::TheConfig.io_timeout_raw
IFDEF: ICAP_CLIENT
DOC_START
	This parameter specifies how long to wait for an I/O activity on
	an established, active ICAP connection before giving up and
	either terminating the HTTP transaction or bypassing the
	failure.

	The default is read_timeout.
DOC_END

NAME: icap_service_failure_limit
COMMENT: limit [in memory-depth time-units]
TYPE: icap_service_failure_limit
IFDEF: ICAP_CLIENT
LOC: Adaptation::Icap::TheConfig
DEFAULT: 10
DOC_START
	The limit specifies the number of failures that Squid tolerates
	when establishing a new TCP connection with an ICAP service. If
	the number of failures exceeds the limit, the ICAP service is
	not used for new ICAP requests until it is time to refresh its
	OPTIONS.

	A negative value disables the limit. Without the limit, an ICAP
	service will not be considered down due to connectivity failures
	between ICAP OPTIONS requests.

	Squid forgets ICAP service failures older than the specified
	value of memory-depth. The memory fading algorithm 
	is approximate because Squid does not remember individual 
	errors but groups them instead, splitting the option
	value into ten time slots of equal length.

	When memory-depth is 0 and by default this option has no 
	effect on service failure expiration.

	Squid always forgets failures when updating service settings
	using an ICAP OPTIONS transaction, regardless of this option
	setting.

	For example,
		# suspend service usage after 10 failures in 5 seconds:
		icap_service_failure_limit 10 in 5 seconds
DOC_END

NAME: icap_service_revival_delay
TYPE: int
IFDEF: ICAP_CLIENT
LOC: Adaptation::Icap::TheConfig.service_revival_delay
DEFAULT: 180
DOC_START
	The delay specifies the number of seconds to wait after an ICAP
	OPTIONS request failure before requesting the options again. The
	failed ICAP service is considered "down" until fresh OPTIONS are
	fetched.

	The actual delay cannot be smaller than the hardcoded minimum
	delay of 30 seconds.
DOC_END

NAME: icap_preview_enable
TYPE: onoff
IFDEF: ICAP_CLIENT
COMMENT: on|off
LOC: Adaptation::Icap::TheConfig.preview_enable
DEFAULT: on
DOC_START
	The ICAP Preview feature allows the ICAP server to handle the
	HTTP message by looking only at the beginning of the message body
	or even without receiving the body at all. In some environments, 
	previews greatly speedup ICAP processing.

	During an ICAP OPTIONS transaction, the server may tell	Squid what
	HTTP messages should be previewed and how big the preview should be.
	Squid will not use Preview if the server did not request one.

	To disable ICAP Preview for all ICAP services, regardless of
	individual ICAP server OPTIONS responses, set this option to "off".
Example:
icap_preview_enable off
DOC_END

NAME: icap_preview_size
TYPE: int
IFDEF: ICAP_CLIENT
LOC: Adaptation::Icap::TheConfig.preview_size
DEFAULT: -1
DOC_START
	The default size of preview data to be sent to the ICAP server.
	-1 means no preview. This value might be overwritten on a per server
	basis by OPTIONS requests.
DOC_END

NAME: icap_206_enable
TYPE: onoff
IFDEF: ICAP_CLIENT
COMMENT: on|off
LOC: Adaptation::Icap::TheConfig.allow206_enable
DEFAULT: on
DOC_START
	206 (Partial Content) responses is an ICAP extension that allows the
	ICAP agents to optionally combine adapted and original HTTP message
	content. The decision to combine is postponed until the end of the
	ICAP response. Squid supports Partial Content extension by default.

	Activation of the Partial Content extension is negotiated with each
	ICAP service during OPTIONS exchange. Most ICAP servers should handle
	negotation correctly even if they do not support the extension, but
	some might fail. To disable Partial Content support for all ICAP
	services and to avoid any negotiation, set this option to "off".

	Example:
	    icap_206_enable off
DOC_END

NAME: icap_default_options_ttl
TYPE: int
IFDEF: ICAP_CLIENT
LOC: Adaptation::Icap::TheConfig.default_options_ttl
DEFAULT: 60
DOC_START
	The default TTL value for ICAP OPTIONS responses that don't have
	an Options-TTL header.
DOC_END

NAME: icap_persistent_connections
TYPE: onoff
IFDEF: ICAP_CLIENT
COMMENT: on|off
LOC: Adaptation::Icap::TheConfig.reuse_connections
DEFAULT: on
DOC_START
	Whether or not Squid should use persistent connections to
	an ICAP server.
DOC_END

NAME: adaptation_send_client_ip icap_send_client_ip
TYPE: onoff
IFDEF: USE_ADAPTATION
COMMENT: on|off
LOC: Adaptation::Config::send_client_ip
DEFAULT: off
DOC_START
	If enabled, Squid shares HTTP client IP information with adaptation
	services. For ICAP, Squid adds the X-Client-IP header to ICAP requests.
	For eCAP, Squid sets the libecap::metaClientIp transaction option.

	See also: adaptation_uses_indirect_client
DOC_END

NAME: adaptation_send_username icap_send_client_username
TYPE: onoff
IFDEF: USE_ADAPTATION
COMMENT: on|off
LOC: Adaptation::Config::send_username
DEFAULT: off
DOC_START
	This sends authenticated HTTP client username (if available) to
	the adaptation service.

	For ICAP, the username value is encoded based on the
	icap_client_username_encode option and is sent using the header
	specified by the icap_client_username_header option.
DOC_END

NAME: icap_client_username_header
TYPE: string
IFDEF: ICAP_CLIENT
LOC: Adaptation::Icap::TheConfig.client_username_header
DEFAULT: X-Client-Username
DOC_START
	ICAP request header name to use for adaptation_send_username.
DOC_END

NAME: icap_client_username_encode
TYPE: onoff
IFDEF: ICAP_CLIENT
COMMENT: on|off
LOC: Adaptation::Icap::TheConfig.client_username_encode
DEFAULT: off
DOC_START
	Whether to base64 encode the authenticated client username.
DOC_END

NAME: icap_service
TYPE: icap_service_type
IFDEF: ICAP_CLIENT
LOC: Adaptation::Icap::TheConfig
DEFAULT: none
DOC_START
	Defines a single ICAP service using the following format:

	icap_service service_name vectoring_point [options] service_url

	service_name: ID
		an opaque identifier which must be unique in squid.conf

	vectoring_point: reqmod_precache|reqmod_postcache|respmod_precache|respmod_postcache
		This specifies at which point of transaction processing the
		ICAP service should be activated. *_postcache vectoring points
		are not yet supported.

	service_url: icap://servername:port/servicepath
		ICAP server and service location.

	ICAP does not allow a single service to handle both REQMOD and RESPMOD
	transactions. Squid does not enforce that requirement. You can specify
	services with the same service_url and different vectoring_points. You
	can even specify multiple identical services as long as their
	service_names differ.


	Service options are separated by white space. ICAP services support
	the following name=value options:

	bypass=on|off|1|0
		If set to 'on' or '1', the ICAP service is treated as
		optional. If the service cannot be reached or malfunctions,
		Squid will try to ignore any errors and process the message as
		if the service was not enabled. No all ICAP errors can be
		bypassed.  If set to 0, the ICAP service is treated as
		essential and all ICAP errors will result in an error page
		returned to the HTTP client.

		Bypass is off by default: services are treated as essential.

	routing=on|off|1|0
		If set to 'on' or '1', the ICAP service is allowed to
		dynamically change the current message adaptation plan by
		returning a chain of services to be used next. The services
		are specified using the X-Next-Services ICAP response header
		value, formatted as a comma-separated list of service names.
		Each named service should be configured in squid.conf and
		should have the same method and vectoring point as the current
		ICAP transaction.  Services violating these rules are ignored.
		An empty X-Next-Services value results in an empty plan which
		ends the current adaptation. 

		Routing is not allowed by default: the ICAP X-Next-Services
		response header is ignored.

	ipv6=on|off
		Only has effect on split-stack systems. The default on those systems
		is to use IPv4-only connections. When set to 'on' this option will
		make Squid use IPv6-only connections to contact this ICAP service.

	on-overload=block|bypass|wait|force
		If the service Max-Connections limit has been reached, do
		one of the following for each new ICAP transaction:
		  * block:  send an HTTP error response to the client
		  * bypass: ignore the "over-connected" ICAP service
		  * wait:   wait (in a FIFO queue) for an ICAP connection slot
		  * force:  proceed, ignoring the Max-Connections limit 

		In SMP mode with N workers, each worker assumes the service
		connection limit is Max-Connections/N, even though not all
		workers may use a given service.

		The default value is "bypass" if service is bypassable,
		otherwise it is set to "wait".
		

	max-conn=number
		Use the given number as the Max-Connections limit, regardless
		of the Max-Connections value given by the service, if any.

	Older icap_service format without optional named parameters is
	deprecated but supported for backward compatibility.

Example:
icap_service svcBlocker reqmod_precache bypass=0 icap://icap1.mydomain.net:1344/reqmod
icap_service svcLogger reqmod_precache routing=on icap://icap2.mydomain.net:1344/respmod
DOC_END

NAME: icap_class
TYPE: icap_class_type
IFDEF: ICAP_CLIENT
LOC: none
DEFAULT: none
DOC_START
	This deprecated option was documented to define an ICAP service
	chain, even though it actually defined a set of similar, redundant
	services, and the chains were not supported. 

	To define a set of redundant services, please use the
	adaptation_service_set directive. For service chains, use
	adaptation_service_chain.
DOC_END

NAME: icap_access
TYPE: icap_access_type
IFDEF: ICAP_CLIENT
LOC: none
DEFAULT: none
DOC_START
	This option is deprecated. Please use adaptation_access, which
	has the same ICAP functionality, but comes with better
	documentation, and eCAP support.
DOC_END

COMMENT_START
 eCAP OPTIONS
 -----------------------------------------------------------------------------
COMMENT_END

NAME: ecap_enable
TYPE: onoff
IFDEF: USE_ECAP
COMMENT: on|off
LOC: Adaptation::Ecap::TheConfig.onoff
DEFAULT: off
DOC_START
	Controls whether eCAP support is enabled.
DOC_END

NAME: ecap_service
TYPE: ecap_service_type
IFDEF: USE_ECAP
LOC: Adaptation::Ecap::TheConfig
DEFAULT: none
DOC_START
	Defines a single eCAP service

	ecap_service servicename vectoring_point bypass service_url

	vectoring_point = reqmod_precache|reqmod_postcache|respmod_precache|respmod_postcache
		This specifies at which point of transaction processing the
		eCAP service should be activated. *_postcache vectoring points
		are not yet supported.
	bypass = 1|0
		If set to 1, the eCAP service is treated as optional. If the
		service cannot be reached or malfunctions, Squid will try to
		ignore any errors and process the message as if the service
		was not enabled. No all eCAP errors can be bypassed.
		If set to 0, the eCAP service is treated as essential and all
		eCAP errors will result in an error page returned to the
		HTTP client.
	service_url = ecap://vendor/service_name?custom&cgi=style&parameters=optional

Example:
ecap_service service_1 reqmod_precache 0 ecap://filters-R-us/leakDetector?on_error=block
ecap_service service_2 respmod_precache 1 icap://filters-R-us/virusFilter?config=/etc/vf.cfg
DOC_END

NAME: loadable_modules
TYPE: wordlist
IFDEF: USE_LOADABLE_MODULES
LOC: Config.loadable_module_names
DEFAULT: none
DOC_START
	Instructs Squid to load the specified dynamic module(s) or activate
	preloaded module(s).
Example:
loadable_modules @DEFAULT_PREFIX@/lib/MinimalAdapter.so
DOC_END

COMMENT_START
 MESSAGE ADAPTATION OPTIONS
 -----------------------------------------------------------------------------
COMMENT_END

NAME: adaptation_service_set
TYPE: adaptation_service_set_type
IFDEF: USE_ADAPTATION
LOC: none
DEFAULT: none
DOC_START

	Configures an ordered set of similar, redundant services. This is
	useful when hot standby or backup adaptation servers are available.

	    adaptation_service_set set_name service_name1 service_name2 ...

 	The named services are used in the set declaration order. The first
	applicable adaptation service from the set is used first. The next
	applicable service is tried if and only if the transaction with the
	previous service fails and the message waiting to be adapted is still
	intact.

	When adaptation starts, broken services are ignored as if they were
	not a part of the set. A broken service is a down optional service.

	The services in a set must be attached to the same vectoring point
	(e.g., pre-cache) and use the same adaptation method (e.g., REQMOD).

	If all services in a set are optional then adaptation failures are
	bypassable. If all services in the set are essential, then a
	transaction failure with one service may still be retried using
	another service from the set, but when all services fail, the master
	transaction fails as well.

	A set may contain a mix of optional and essential services, but that
	is likely to lead to surprising results because broken services become
	ignored (see above), making previously bypassable failures fatal.
	Technically, it is the bypassability of the last failed service that
	matters.

	See also: adaptation_access adaptation_service_chain

Example:
adaptation_service_set svcBlocker urlFilterPrimary urlFilterBackup
adaptation service_set svcLogger loggerLocal loggerRemote
DOC_END

NAME: adaptation_service_chain
TYPE: adaptation_service_chain_type
IFDEF: USE_ADAPTATION
LOC: none
DEFAULT: none
DOC_START

	Configures a list of complementary services that will be applied
	one-by-one, forming an adaptation chain or pipeline. This is useful
	when Squid must perform different adaptations on the same message.

	    adaptation_service_chain chain_name service_name1 svc_name2 ...

 	The named services are used in the chain declaration order. The first
	applicable adaptation service from the chain is used first. The next
	applicable service is applied to the successful adaptation results of
	the previous service in the chain.

	When adaptation starts, broken services are ignored as if they were
	not a part of the chain. A broken service is a down optional service.

	Request satisfaction terminates the adaptation chain because Squid
	does not currently allow declaration of RESPMOD services at the
	"reqmod_precache" vectoring point (see icap_service or ecap_service).

	The services in a chain must be attached to the same vectoring point
	(e.g., pre-cache) and use the same adaptation method (e.g., REQMOD).

	A chain may contain a mix of optional and essential services. If an
	essential adaptation fails (or the failure cannot be bypassed for
	other reasons), the master transaction fails. Otherwise, the failure
	is bypassed as if the failed adaptation service was not in the chain.

	See also: adaptation_access adaptation_service_set

Example:
adaptation_service_chain svcRequest requestLogger urlFilter leakDetector
DOC_END

NAME: adaptation_access
TYPE: adaptation_access_type
IFDEF: USE_ADAPTATION
LOC: none
DEFAULT: none
DOC_START
	Sends an HTTP transaction to an ICAP or eCAP adaptation	service.

	adaptation_access service_name allow|deny [!]aclname...
	adaptation_access set_name     allow|deny [!]aclname...

	At each supported vectoring point, the adaptation_access
	statements are processed in the order they appear in this
	configuration file. Statements pointing to the following services
	are ignored (i.e., skipped without checking their ACL):

	    - services serving different vectoring points
	    - "broken-but-bypassable" services
	    - "up" services configured to ignore such transactions
              (e.g., based on the ICAP Transfer-Ignore header).

        When a set_name is used, all services in the set are checked
	using the same rules, to find the first applicable one. See
	adaptation_service_set for details.

	If an access list is checked and there is a match, the
	processing stops: For an "allow" rule, the corresponding
	adaptation service is used for the transaction. For a "deny"
	rule, no adaptation service is activated.

	It is currently not possible to apply more than one adaptation
	service at the same vectoring point to the same HTTP transaction.

        See also: icap_service and ecap_service

Example:
adaptation_access service_1 allow all
DOC_END

NAME: adaptation_service_iteration_limit
TYPE: int
IFDEF: USE_ADAPTATION
LOC: Adaptation::Config::service_iteration_limit
DEFAULT: 16
DOC_START
	Limits the number of iterations allowed when applying adaptation
	services to a message. If your longest adaptation set or chain
	may have more than 16 services, increase the limit beyond its
	default value of 16. If detecting infinite iteration loops sooner
	is critical, make the iteration limit match the actual number
	of services in your longest adaptation set or chain.

	Infinite adaptation loops are most likely with routing services.

	See also: icap_service routing=1
DOC_END

NAME: adaptation_masterx_shared_names
TYPE: string
IFDEF: USE_ADAPTATION
LOC: Adaptation::Config::masterx_shared_name
DEFAULT: none
DOC_START
	For each master transaction (i.e., the HTTP request and response
	sequence, including all related ICAP and eCAP exchanges), Squid
	maintains a table of metadata. The table entries are (name, value)
	pairs shared among eCAP and ICAP exchanges. The table is destroyed
	with the master transaction.

	This option specifies the table entry names that Squid must accept
	from and forward to the adaptation transactions.

	An ICAP REQMOD or RESPMOD transaction may set an entry in the 
	shared table by returning an ICAP header field with a name 
	specified in adaptation_masterx_shared_names.

	An eCAP REQMOD or RESPMOD transaction may set an entry in the
	shared table by implementing the libecap::visitEachOption() API
	to provide an option with a name specified in
	adaptation_masterx_shared_names.

	Squid will store and forward the set entry to subsequent adaptation
	transactions within the same master transaction scope.

	Only one shared entry name is supported at this time.

Example:
# share authentication information among ICAP services
adaptation_masterx_shared_names X-Subscriber-ID
DOC_END

NAME: icap_retry
TYPE: acl_access
IFDEF: ICAP_CLIENT
LOC: Adaptation::Icap::TheConfig.repeat
DEFAULT_IF_NONE: deny all
DOC_START
	This ACL determines which retriable ICAP transactions are
	retried. Transactions that received a complete ICAP response
	and did not have to consume or produce HTTP bodies to receive
	that response are usually retriable.

	icap_retry allow|deny [!]aclname ...

	Squid automatically retries some ICAP I/O timeouts and errors
	due to persistent connection race conditions.

	See also: icap_retry_limit
DOC_END

NAME: icap_retry_limit
TYPE: int
IFDEF: ICAP_CLIENT
LOC: Adaptation::Icap::TheConfig.repeat_limit
DEFAULT: 0
DOC_START
	Limits the number of retries allowed. When set to zero (default),
	no retries are allowed.

	Communication errors due to persistent connection race
	conditions are unavoidable, automatically retried, and do not
	count against this limit.

	See also: icap_retry
DOC_END


COMMENT_START
 DNS OPTIONS
 -----------------------------------------------------------------------------
COMMENT_END

NAME: check_hostnames
TYPE: onoff
DEFAULT: off
LOC: Config.onoff.check_hostnames
DOC_START
	For security and stability reasons Squid can check
	hostnames for Internet standard RFC compliance. If you want
	Squid to perform these checks turn this directive on.
DOC_END

NAME: allow_underscore
TYPE: onoff
DEFAULT: on
LOC: Config.onoff.allow_underscore
DOC_START
	Underscore characters is not strictly allowed in Internet hostnames
	but nevertheless used by many sites. Set this to off if you want
	Squid to be strict about the standard.
	This check is performed only when check_hostnames is set to on.
DOC_END

NAME: cache_dns_program
TYPE: string
IFDEF: USE_DNSSERVERS
DEFAULT: @DEFAULT_DNSSERVER@
LOC: Config.Program.dnsserver
DOC_START
	Specify the location of the executable for dnslookup process.
DOC_END

NAME: dns_children
TYPE: HelperChildConfig
IFDEF: USE_DNSSERVERS
DEFAULT: 32 startup=1 idle=1
LOC: Config.dnsChildren
DOC_START
	The maximum number of processes spawn to service DNS name lookups.
	If you limit it too few Squid will have to wait for them to process
	a backlog of requests, slowing it down. If you allow too many they
	will use RAM and other system resources noticably.
	The maximum this may be safely set to is 32.
	
	The startup= and idle= options allow some measure of skew in your
	tuning.
	
		startup=
	
	Sets a minimum of how many processes are to be spawned when Squid
	starts or reconfigures. When set to zero the first request will
	cause spawning of the first child process to handle it.
	
	Starting too few will cause an initial slowdown in traffic as Squid
	attempts to simultaneously spawn enough processes to cope.
	
		idle=
	
	Sets a minimum of how many processes Squid is to try and keep available
	at all times. When traffic begins to rise above what the existing
	processes can handle this many more will be spawned up to the maximum
	configured. A minimum setting of 1 is required.
DOC_END

NAME: dns_retransmit_interval
TYPE: time_msec
DEFAULT: 5 seconds
LOC: Config.Timeout.idns_retransmit
IFDEF: !USE_DNSSERVERS
DOC_START
	Initial retransmit interval for DNS queries. The interval is
	doubled each time all configured DNS servers have been tried.
DOC_END

NAME: dns_timeout
TYPE: time_msec
DEFAULT: 30 seconds
LOC: Config.Timeout.idns_query
IFDEF: !USE_DNSSERVERS
DOC_START
	DNS Query timeout. If no response is received to a DNS query
	within this time all DNS servers for the queried domain
	are assumed to be unavailable.
DOC_END

NAME: dns_packet_max
TYPE: b_ssize_t
DEFAULT: none
LOC: Config.dns.packet_max
IFDEF: !USE_DNSSERVERS
DOC_START
	Maximum number of bytes packet size to advertise via EDNS.
	Set to "none" to disable EDNS large packet support.
	
	For legacy reasons DNS UDP replies will default to 512 bytes which
	is too small for many responses. EDNS provides a means for Squid to
	negotiate receiving larger responses back immediately without having
	to failover with repeat requests. Responses larger than this limit
	will retain the old behaviour of failover to TCP DNS.
	
	Squid has no real fixed limit internally, but allowing packet sizes
	over 1500 bytes requires network jumbogram support and is usually not
	necessary.
	
	WARNING: The RFC also indicates that some older resolvers will reply
	with failure of the whole request if the extension is added. Some
	resolvers have already been identified which will reply with mangled
	EDNS response on occasion. Usually in response to many-KB jumbogram
	sizes being advertised by Squid.
	Squid will currently treat these both as an unable-to-resolve domain
	even if it would be resolvable without EDNS.
DOC_END

NAME: dns_defnames
COMMENT: on|off
TYPE: onoff
DEFAULT: off
LOC: Config.onoff.res_defnames
DOC_START
	Normally the RES_DEFNAMES resolver option is disabled
	(see res_init(3)).  This prevents caches in a hierarchy
	from interpreting single-component hostnames locally.  To allow
	Squid to handle single-component names, enable this option.
DOC_END

NAME: dns_nameservers
TYPE: wordlist
DEFAULT: none
LOC: Config.dns_nameservers
DOC_START
	Use this if you want to specify a list of DNS name servers
	(IP addresses) to use instead of those given in your
	/etc/resolv.conf file.
	On Windows platforms, if no value is specified here or in
	the /etc/resolv.conf file, the list of DNS name servers are
	taken from the Windows registry, both static and dynamic DHCP
	configurations are supported.

	Example: dns_nameservers 10.0.0.1 192.172.0.4
DOC_END

NAME: hosts_file
TYPE: string
DEFAULT: @DEFAULT_HOSTS@
LOC: Config.etcHostsPath
DOC_START
	Location of the host-local IP name-address associations
	database. Most Operating Systems have such a file on different
	default locations:
	- Un*X & Linux:    /etc/hosts
	- Windows NT/2000: %SystemRoot%\system32\drivers\etc\hosts
			   (%SystemRoot% value install default is c:\winnt)
	- Windows XP/2003: %SystemRoot%\system32\drivers\etc\hosts
			   (%SystemRoot% value install default is c:\windows)
	- Windows 9x/Me:   %windir%\hosts
			   (%windir% value is usually c:\windows)
	- Cygwin:	   /etc/hosts

	The file contains newline-separated definitions, in the
	form ip_address_in_dotted_form name [name ...] names are
	whitespace-separated. Lines beginning with an hash (#)
	character are comments.

	The file is checked at startup and upon configuration.
	If set to 'none', it won't be checked.
	If append_domain is used, that domain will be added to
	domain-local (i.e. not containing any dot character) host
	definitions.
DOC_END

NAME: append_domain
TYPE: string
LOC:  Config.appendDomain
DEFAULT: none
DOC_START
	Appends local domain name to hostnames without any dots in
	them.  append_domain must begin with a period.

	Be warned there are now Internet names with no dots in
	them using only top-domain names, so setting this may
	cause some Internet sites to become unavailable.

Example:
 append_domain .yourdomain.com
DOC_END

NAME: ignore_unknown_nameservers
TYPE: onoff
LOC: Config.onoff.ignore_unknown_nameservers
DEFAULT: on
DOC_START
	By default Squid checks that DNS responses are received
	from the same IP addresses they are sent to.  If they
	don't match, Squid ignores the response and writes a warning
	message to cache.log.  You can allow responses from unknown
	nameservers by setting this option to 'off'.
DOC_END

NAME: dns_v4_fallback
TYPE: onoff
DEFAULT: on
LOC: Config.onoff.dns_require_A
DOC_START
	Standard practice with DNS is to lookup either A or AAAA records
	and use the results if it succeeds. Only looking up the other if
	the first attempt fails or otherwise produces no results.

	That policy however will cause squid to produce error pages for some
	servers that advertise AAAA but are unreachable over IPv6.

	If this is ON  squid will always lookup both AAAA and A, using both.
	If this is OFF squid will lookup AAAA and only try A if none found.

	WARNING: There are some possibly unwanted side-effects with this on:
		*) Doubles the load placed by squid on the DNS network.
		*) May negatively impact connection delay times.
DOC_END

NAME: ipcache_size
COMMENT: (number of entries)
TYPE: int
DEFAULT: 1024
LOC: Config.ipcache.size
DOC_NONE

NAME: ipcache_low
COMMENT: (percent)
TYPE: int
DEFAULT: 90
LOC: Config.ipcache.low
DOC_NONE

NAME: ipcache_high
COMMENT: (percent)
TYPE: int
DEFAULT: 95
LOC: Config.ipcache.high
DOC_START
	The size, low-, and high-water marks for the IP cache.
DOC_END

NAME: fqdncache_size
COMMENT: (number of entries)
TYPE: int
DEFAULT: 1024
LOC: Config.fqdncache.size
DOC_START
	Maximum number of FQDN cache entries.
DOC_END

COMMENT_START
 MISCELLANEOUS
 -----------------------------------------------------------------------------
COMMENT_END

NAME: memory_pools
COMMENT: on|off
TYPE: onoff
DEFAULT: on
LOC: Config.onoff.mem_pools
DOC_START
	If set, Squid will keep pools of allocated (but unused) memory
	available for future use.  If memory is a premium on your
	system and you believe your malloc library outperforms Squid
	routines, disable this.
DOC_END

NAME: memory_pools_limit
COMMENT: (bytes)
TYPE: b_int64_t
DEFAULT: 5 MB
LOC: Config.MemPools.limit
DOC_START
	Used only with memory_pools on:
	memory_pools_limit 50 MB

	If set to a non-zero value, Squid will keep at most the specified
	limit of allocated (but unused) memory in memory pools. All free()
	requests that exceed this limit will be handled by your malloc
	library. Squid does not pre-allocate any memory, just safe-keeps
	objects that otherwise would be free()d. Thus, it is safe to set
	memory_pools_limit to a reasonably high value even if your
	configuration will use less memory.

	If set to none, Squid will keep all memory it can. That is, there
	will be no limit on the total amount of memory used for safe-keeping.

	To disable memory allocation optimization, do not set
	memory_pools_limit to 0 or none. Set memory_pools to "off" instead.

	An overhead for maintaining memory pools is not taken into account
	when the limit is checked. This overhead is close to four bytes per
	object kept. However, pools may actually _save_ memory because of
	reduced memory thrashing in your malloc library.
DOC_END

NAME: forwarded_for
COMMENT: on|off|transparent|truncate|delete
TYPE: string
DEFAULT: on
LOC: opt_forwarded_for
DOC_START
	If set to "on", Squid will append your client's IP address
	in the HTTP requests it forwards. By default it looks like:

		X-Forwarded-For: 192.1.2.3

	If set to "off", it will appear as

		X-Forwarded-For: unknown

	If set to "transparent", Squid will not alter the
	X-Forwarded-For header in any way.

	If set to "delete", Squid will delete the entire
	X-Forwarded-For header.

	If set to "truncate", Squid will remove all existing
	X-Forwarded-For entries, and place the client IP as the sole entry.
DOC_END

NAME: cachemgr_passwd
TYPE: cachemgrpasswd
DEFAULT: none
LOC: Config.passwd_list
DOC_START
	Specify passwords for cachemgr operations.

	Usage: cachemgr_passwd password action action ...

	Some valid actions are (see cache manager menu for a full list):
		5min
		60min
		asndb
		authenticator
		cbdata
		client_list
		comm_incoming
		config *
		counters
		delay
		digest_stats
		dns
		events
		filedescriptors
		fqdncache
		histograms
		http_headers
		info
		io
		ipcache
		mem
		menu
		netdb
		non_peers
		objects
		offline_toggle *
		pconn
		peer_select
		reconfigure *
		redirector
		refresh
		server_list
		shutdown *
		store_digest
		storedir
		utilization
		via_headers
		vm_objects

	* Indicates actions which will not be performed without a
	  valid password, others can be performed if not listed here.

	To disable an action, set the password to "disable".
	To allow performing an action without a password, set the
	password to "none".

	Use the keyword "all" to set the same password for all actions.

Example:
 cachemgr_passwd secret shutdown
 cachemgr_passwd lesssssssecret info stats/objects
 cachemgr_passwd disable all
DOC_END

NAME: client_db
COMMENT: on|off
TYPE: onoff
DEFAULT: on
LOC: Config.onoff.client_db
DOC_START
	If you want to disable collecting per-client statistics,
	turn off client_db here.
DOC_END

NAME: refresh_all_ims
COMMENT: on|off
TYPE: onoff
DEFAULT: off
LOC: Config.onoff.refresh_all_ims
DOC_START
	When you enable this option, squid will always check
	the origin server for an update when a client sends an
	If-Modified-Since request.  Many browsers use IMS
	requests when the user requests a reload, and this
	ensures those clients receive the latest version.

	By default (off), squid may return a Not Modified response
	based on the age of the cached version.
DOC_END

NAME: reload_into_ims
IFDEF: USE_HTTP_VIOLATIONS
COMMENT: on|off
TYPE: onoff
DEFAULT: off
LOC: Config.onoff.reload_into_ims
DOC_START
	When you enable this option, client no-cache or ``reload''
	requests will be changed to If-Modified-Since requests.
	Doing this VIOLATES the HTTP standard.  Enabling this
	feature could make you liable for problems which it
	causes.

	see also refresh_pattern for a more selective approach.
DOC_END

NAME: maximum_single_addr_tries
TYPE: int
LOC: Config.retry.maxtries
DEFAULT: 1
DOC_START
	This sets the maximum number of connection attempts for a
	host that only has one address (for multiple-address hosts,
	each address is tried once).

	The default value is one attempt, the (not recommended)
	maximum is 255 tries.  A warning message will be generated
	if it is set to a value greater than ten.

	Note: This is in addition to the request re-forwarding which
	takes place if Squid fails to get a satisfying response.
DOC_END

NAME: retry_on_error
TYPE: onoff
LOC: Config.retry.onerror
DEFAULT: off
DOC_START
	If set to on Squid will automatically retry requests when
	receiving an error response. This is mainly useful if you
	are in a complex cache hierarchy to work around access
	control errors.
DOC_END

NAME: as_whois_server
TYPE: string
LOC: Config.as_whois_server
DEFAULT: whois.ra.net
DOC_START
	WHOIS server to query for AS numbers.  NOTE: AS numbers are
	queried only when Squid starts up, not for every request.
DOC_END

NAME: offline_mode
TYPE: onoff
LOC: Config.onoff.offline
DEFAULT: off
DOC_START
	Enable this option and Squid will never try to validate cached
	objects.
DOC_END

NAME: uri_whitespace
TYPE: uri_whitespace
LOC: Config.uri_whitespace
DEFAULT: strip
DOC_START
	What to do with requests that have whitespace characters in the
	URI.  Options:

	strip:  The whitespace characters are stripped out of the URL.
		This is the behavior recommended by RFC2396.
	deny:   The request is denied.  The user receives an "Invalid
		Request" message.
	allow:  The request is allowed and the URI is not changed.  The
		whitespace characters remain in the URI.  Note the
		whitespace is passed to redirector processes if they
		are in use.
	encode:	The request is allowed and the whitespace characters are
		encoded according to RFC1738.  This could be considered
		a violation of the HTTP/1.1
		RFC because proxies are not allowed to rewrite URI's.
	chop:	The request is allowed and the URI is chopped at the
		first whitespace.  This might also be considered a
		violation.
DOC_END

NAME: chroot
TYPE: string
LOC: Config.chroot_dir
DEFAULT: none
DOC_START
	Specifies a directory where Squid should do a chroot() while
	initializing.  This also causes Squid to fully drop root
	privileges after initializing.  This means, for example, if you
	use a HTTP port less than 1024 and try to reconfigure, you may
	get an error saying that Squid can not open the port.
DOC_END

NAME: balance_on_multiple_ip
TYPE: onoff
LOC: Config.onoff.balance_on_multiple_ip
DEFAULT: off
DOC_START
	Modern IP resolvers in squid sort lookup results by preferred access.
	By default squid will use these IP in order and only rotates to
	the next listed when the most preffered fails.

	Some load balancing servers based on round robin DNS have been
	found not to preserve user session state across requests
	to different IP addresses.

	Enabling this directive Squid rotates IP's per request.
DOC_END

NAME: pipeline_prefetch
TYPE: onoff
LOC: Config.onoff.pipeline_prefetch
DEFAULT: off
DOC_START
	To boost the performance of pipelined requests to closer
	match that of a non-proxied environment Squid can try to fetch
	up to two requests in parallel from a pipeline.

	Defaults to off for bandwidth management and access logging
	reasons.

	WARNING: pipelining breaks NTLM and Negotiate/Kerberos authentication.
DOC_END

NAME: high_response_time_warning
TYPE: int
COMMENT: (msec)
LOC: Config.warnings.high_rptm
DEFAULT: 0
DOC_START
	If the one-minute median response time exceeds this value,
	Squid prints a WARNING with debug level 0 to get the
	administrators attention.  The value is in milliseconds.
DOC_END

NAME: high_page_fault_warning
TYPE: int
LOC: Config.warnings.high_pf
DEFAULT: 0
DOC_START
	If the one-minute average page fault rate exceeds this
	value, Squid prints a WARNING with debug level 0 to get
	the administrators attention.  The value is in page faults
	per second.
DOC_END

NAME: high_memory_warning
TYPE: b_size_t
LOC: Config.warnings.high_memory
DEFAULT: 0 KB
DOC_START
	If the memory usage (as determined by mallinfo) exceeds
	this amount, Squid prints a WARNING with debug level 0 to get
	the administrators attention.
DOC_END

NAME: sleep_after_fork
COMMENT: (microseconds)
TYPE: int
LOC: Config.sleep_after_fork
DEFAULT: 0
DOC_START
	When this is set to a non-zero value, the main Squid process
	sleeps the specified number of microseconds after a fork()
	system call. This sleep may help the situation where your
	system reports fork() failures due to lack of (virtual)
	memory. Note, however, if you have a lot of child
	processes, these sleep delays will add up and your
	Squid will not service requests for some amount of time
	until all the child processes have been started.
	On Windows value less then 1000 (1 milliseconds) are
	rounded to 1000.
DOC_END

NAME: windows_ipaddrchangemonitor
IFDEF: _SQUID_MSWIN_
COMMENT: on|off
TYPE: onoff
DEFAULT: on
LOC: Config.onoff.WIN32_IpAddrChangeMonitor
DOC_START
	On Windows Squid by default will monitor IP address changes and will 
	reconfigure itself after any detected event. This is very useful for
	proxies connected to internet with dial-up interfaces.
	In some cases (a Proxy server acting as VPN gateway is one) it could be
	desiderable to disable this behaviour setting this to 'off'.
	Note: after changing this, Squid service must be restarted.
DOC_END

NAME: eui_lookup
TYPE: onoff
IFDEF: USE_SQUID_EUI
DEFAULT: on
LOC: Eui::TheConfig.euiLookup
DOC_START
	Whether to lookup the EUI or MAC address of a connected client.
DOC_END

NAME: max_filedescriptors max_filedesc
TYPE: int
DEFAULT: 0
LOC: Config.max_filedescriptors
DOC_START
	The maximum number of filedescriptors supported.

	The default "0" means Squid inherits the current ulimit setting.

	Note: Changing this requires a restart of Squid. Also
	not all comm loops supports large values.
DOC_END

NAME: workers
TYPE: int
LOC: Config.workers
DEFAULT: 1
DOC_START
	Number of main Squid processes or "workers" to fork and maintain.
	0: "no daemon" mode, like running "squid -N ..."
	1: "no SMP" mode, start one main Squid process daemon (default)
	N: start N main Squid process daemons (i.e., SMP mode)

	In SMP mode, each worker does nearly all what a single Squid daemon
	does (e.g., listen on http_port and forward HTTP requests).
DOC_END

NAME: cpu_affinity_map
TYPE: CpuAffinityMap
LOC: Config.cpuAffinityMap
DEFAULT: none
DOC_START
	Usage: cpu_affinity_map process_numbers=P1,P2,... cores=C1,C2,...

	Sets 1:1 mapping between Squid processes and CPU cores. For example,

	    cpu_affinity_map process_numbers=1,2,3,4 cores=1,3,5,7

	affects processes 1 through 4 only and places them on the first
	four even cores, starting with core #1.

	CPU cores are numbered starting from 1. Requires support for
	sched_getaffinity(2) and sched_setaffinity(2) system calls.

	Multiple cpu_affinity_map options are merged.

	See also: workers
DOC_END

EOF