]>
Commit | Line | Data |
---|---|---|
3a278cb8 | 1 | |
9cef6668 | 2 | # |
0b0cfcf2 | 3 | # $Id: cf.data.pre,v 1.419 2006/07/02 16:53:46 serassio Exp $ |
9cef6668 | 4 | # |
5 | # | |
6845f129 | 6 | # SQUID Web Proxy Cache http://www.squid-cache.org/ |
9cef6668 | 7 | # ---------------------------------------------------------- |
8 | # | |
2b6662ba | 9 | # Squid is the result of efforts by numerous individuals from |
10 | # the Internet community; see the CONTRIBUTORS file for full | |
11 | # details. Many organizations have provided support for Squid's | |
12 | # development; see the SPONSORS file for full details. Squid is | |
13 | # Copyrighted (C) 2000 by the Regents of the University of | |
14 | # California; see the COPYRIGHT file for full details. Squid | |
15 | # incorporates software developed and/or copyrighted by other | |
16 | # sources; see the CREDITS file for full details. | |
9cef6668 | 17 | # |
18 | # This program is free software; you can redistribute it and/or modify | |
19 | # it under the terms of the GNU General Public License as published by | |
20 | # the Free Software Foundation; either version 2 of the License, or | |
21 | # (at your option) any later version. | |
96d88dcb | 22 | # |
9cef6668 | 23 | # This program is distributed in the hope that it will be useful, |
24 | # but WITHOUT ANY WARRANTY; without even the implied warranty of | |
25 | # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
26 | # GNU General Public License for more details. | |
96d88dcb | 27 | # |
9cef6668 | 28 | # You should have received a copy of the GNU General Public License |
29 | # along with this program; if not, write to the Free Software | |
30 | # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111, USA. | |
31 | # | |
32 | ||
0f74202c | 33 | COMMENT_START |
cccac0a2 | 34 | WELCOME TO SQUID @VERSION@ |
35 | ---------------------------- | |
3a278cb8 | 36 | |
cccac0a2 | 37 | This is the default Squid configuration file. You may wish |
38 | to look at the Squid home page (http://www.squid-cache.org/) | |
39 | for the FAQ and other documentation. | |
3a278cb8 | 40 | |
cccac0a2 | 41 | The default Squid config file shows what the defaults for |
42 | various options happen to be. If you don't need to change the | |
43 | default, you shouldn't uncomment the line. Doing so may cause | |
44 | run-time problems. In some cases "none" refers to no default | |
45 | setting at all, while in other cases it refers to a valid | |
46 | option - the comments for that keyword indicate if this is the | |
47 | case. | |
debd9a31 | 48 | |
cccac0a2 | 49 | COMMENT_END |
3a278cb8 | 50 | |
cccac0a2 | 51 | COMMENT_START |
52 | NETWORK OPTIONS | |
53 | ----------------------------------------------------------------------------- | |
54 | COMMENT_END | |
55 | ||
56 | NAME: http_port ascii_port | |
57 | TYPE: http_port_list | |
58 | DEFAULT: none | |
59 | LOC: Config.Sockaddr.http | |
60 | DOC_START | |
61 | Usage: port [options] | |
62 | hostname:port [options] | |
63 | 1.2.3.4:port [options] | |
64 | ||
65 | The socket addresses where Squid will listen for HTTP client | |
66 | requests. You may specify multiple socket addresses. | |
67 | There are three forms: port alone, hostname with port, and | |
68 | IP address with port. If you specify a hostname or IP | |
7f7db318 | 69 | address, Squid binds the socket to that specific |
cccac0a2 | 70 | address. This replaces the old 'tcp_incoming_address' |
71 | option. Most likely, you do not need to bind to a specific | |
72 | address, so you can use the port number alone. | |
73 | ||
7f7db318 | 74 | If you are running Squid in accelerator mode, you |
cccac0a2 | 75 | probably want to listen on port 80 also, or instead. |
76 | ||
77 | The -a command line option will override the *first* port | |
78 | number listed here. That option will NOT override an IP | |
79 | address, however. | |
80 | ||
81 | You may specify multiple socket addresses on multiple lines. | |
82 | ||
116c6cca | 83 | Options: |
84 | ||
85 | transparent Support for transparent proxies | |
86 | ||
87 | accel Accelerator mode. Also set implicit by the other | |
88 | accelerator directives | |
89 | ||
90 | vhost Accelerator mode using Host header for virtual | |
91 | domain support | |
92 | ||
93 | vport Accelerator with IP based virtual host support | |
94 | ||
95 | vport=NN As above, but uses specified port number rather | |
96 | than the http_port number | |
97 | ||
98 | defaultsite= Main web site name for accelerators | |
99 | ||
100 | protocol= Protocol to reconstruct accelerated requests with. | |
101 | Defaults to http | |
cccac0a2 | 102 | |
5529ca8a | 103 | disable-pmtu-discovery= |
6845f129 | 104 | Control Path-MTU discovery usage: |
105 | off lets OS decide on what to do (default). | |
106 | transparent disable PMTU discovery when transparent | |
107 | support is enabled. | |
108 | always disable always PMTU discovery. | |
5529ca8a | 109 | |
110 | In many setups of transparently intercepting proxies Path-MTU | |
111 | discovery can not work on traffic towards the clients. This is | |
112 | the case when the intercepting device does not fully track | |
113 | connections and fails to forward ICMP must fragment messages | |
114 | to the cache server. If you have such setup and experience that | |
115 | certain clients sporadically hang or never complete requests set | |
116 | disable-pmtu-discovery option to 'transparent'. | |
117 | ||
cccac0a2 | 118 | If you run Squid on a dual-homed machine with an internal |
7f7db318 | 119 | and an external interface we recommend you to specify the |
cccac0a2 | 120 | internal address:port in http_port. This way Squid will only be |
121 | visible on the internal address. | |
122 | NOCOMMENT_START | |
123 | # Squid normally listens to port 3128 | |
58c1507a | 124 | http_port @DEFAULT_HTTP_PORT@ |
cccac0a2 | 125 | NOCOMMENT_END |
126 | DOC_END | |
127 | ||
128 | NAME: https_port | |
129 | IFDEF: USE_SSL | |
130 | TYPE: https_port_list | |
131 | DEFAULT: none | |
132 | LOC: Config.Sockaddr.https | |
133 | DOC_START | |
6845f129 | 134 | Usage: [ip:]port cert=certificate.pem [key=key.pem] [options...] |
cccac0a2 | 135 | |
6845f129 | 136 | The socket address where Squid will listen for HTTPS client |
137 | requests. | |
cccac0a2 | 138 | |
6845f129 | 139 | This is really only useful for situations where you are running |
140 | squid in accelerator mode and you want to do the SSL work at the | |
141 | accelerator level. | |
cccac0a2 | 142 | |
143 | You may specify multiple socket addresses on multiple lines, | |
144 | each with their own SSL certificate and/or options. | |
b8c0c06d | 145 | |
cccac0a2 | 146 | Options: |
147 | ||
148 | defaultsite= The name of the https site presented on | |
116c6cca | 149 | this port |
cccac0a2 | 150 | |
151 | protocol= Protocol to reconstruct accelerated requests | |
116c6cca | 152 | with. Defaults to https |
cccac0a2 | 153 | |
154 | cert= Path to SSL certificate (PEM format) | |
7f7db318 | 155 | |
cccac0a2 | 156 | key= Path to SSL private key file (PEM format) |
157 | if not specified, the certificate file is | |
158 | assumed to be a combined certificate and | |
159 | key file | |
160 | ||
161 | version= The version of SSL/TLS supported | |
162 | 1 automatic (default) | |
163 | 2 SSLv2 only | |
164 | 3 SSLv3 only | |
165 | 4 TLSv1 only | |
166 | ||
167 | cipher= Colon separated list of supported ciphers | |
168 | ||
5ac1a5b3 | 169 | options= Various SSL engine options. The most important |
cccac0a2 | 170 | being: |
171 | NO_SSLv2 Disallow the use of SSLv2 | |
172 | NO_SSLv3 Disallow the use of SSLv3 | |
173 | NO_TLSv1 Disallow the use of TLSv1 | |
174 | SINGLE_DH_USE Always create a new key when using | |
175 | temporary/ephemeral DH key exchanges | |
176 | See src/ssl_support.c or OpenSSL SSL_CTX_set_options | |
116c6cca | 177 | documentation for a complete list of options |
cccac0a2 | 178 | |
179 | clientca= File containing the list of CAs to use when | |
180 | requesting a client certificate | |
181 | ||
182 | cafile= File containing additional CA certificates to | |
183 | use when verifying client certificates. If unset | |
116c6cca | 184 | clientca will be used |
cccac0a2 | 185 | |
186 | capath= Directory containing additional CA certificates | |
a82a4fe4 | 187 | and CRL lists to use when verifying client certificates |
188 | ||
189 | crlfile= File of additional CRL lists to use when verifying | |
190 | the client certificate, in addition to CRLs stored in | |
191 | the capath. Implies VERIFY_CRL flag below. | |
cccac0a2 | 192 | |
193 | dhparams= File containing DH parameters for temporary/ephemeral | |
194 | DH key exchanges | |
195 | ||
196 | sslflags= Various flags modifying the use of SSL: | |
197 | DELAYED_AUTH | |
198 | Don't request client certificates | |
199 | immediately, but wait until acl processing | |
a82a4fe4 | 200 | requires a certificate (not yet implemented) |
7f7db318 | 201 | NO_DEFAULT_CA |
a82a4fe4 | 202 | Don't use the default CA lists built in |
116c6cca | 203 | to OpenSSL |
b13877cc | 204 | NO_SESSION_REUSE |
205 | Don't allow for session reuse. Each connection | |
206 | will result in a new SSL session. | |
a82a4fe4 | 207 | VERIFY_CRL |
208 | Verify CRL lists when accepting client | |
209 | certificates | |
210 | VERIFY_CRL_ALL | |
211 | Verify CRL lists for all certificates in the | |
212 | client certificate chain | |
116c6cca | 213 | |
6b2936d5 | 214 | sslcontext= SSL session ID context identifier. |
215 | ||
116c6cca | 216 | accel Accelerator mode. Also set implicit by the other |
217 | accelerator directives | |
218 | ||
219 | vhost Accelerator mode using Host header for virtual | |
220 | domain support | |
221 | ||
222 | vport Accelerator with IP based virtual host support | |
223 | ||
224 | vport=NN As above, but uses specified port number rather | |
225 | than the https_port number | |
cccac0a2 | 226 | |
227 | DOC_END | |
228 | ||
229 | NAME: ssl_unclean_shutdown | |
230 | IFDEF: USE_SSL | |
231 | TYPE: onoff | |
232 | DEFAULT: off | |
233 | LOC: Config.SSL.unclean_shutdown | |
234 | DOC_START | |
235 | Some browsers (especially MSIE) bugs out on SSL shutdown | |
236 | messages. | |
237 | DOC_END | |
238 | ||
239 | NAME: ssl_engine | |
240 | IFDEF: USE_SSL | |
241 | TYPE: string | |
242 | LOC: Config.SSL.ssl_engine | |
243 | DEFAULT: none | |
244 | DOC_START | |
245 | The openssl engine to use. You will need to set this if you | |
246 | would like to use hardware SSL acceleration for example. | |
247 | DOC_END | |
248 | ||
249 | NAME: sslproxy_client_certificate | |
250 | IFDEF: USE_SSL | |
251 | DEFAULT: none | |
252 | LOC: Config.ssl_client.cert | |
253 | TYPE: string | |
254 | DOC_START | |
255 | Client SSL Certificate to use when proxying https:// URLs | |
256 | DOC_END | |
257 | ||
258 | NAME: sslproxy_client_key | |
259 | IFDEF: USE_SSL | |
260 | DEFAULT: none | |
261 | LOC: Config.ssl_client.key | |
262 | TYPE: string | |
263 | DOC_START | |
264 | Client SSL Key to use when proxying https:// URLs | |
265 | DOC_END | |
266 | ||
267 | NAME: sslproxy_version | |
268 | IFDEF: USE_SSL | |
269 | DEFAULT: 1 | |
270 | LOC: Config.ssl_client.version | |
271 | TYPE: int | |
272 | DOC_START | |
273 | SSL version level to use when proxying https:// URLs | |
274 | DOC_END | |
275 | ||
276 | NAME: sslproxy_options | |
277 | IFDEF: USE_SSL | |
278 | DEFAULT: none | |
279 | LOC: Config.ssl_client.options | |
280 | TYPE: string | |
281 | DOC_START | |
282 | SSL engine options to use when proxying https:// URLs | |
283 | DOC_END | |
284 | ||
285 | NAME: sslproxy_cipher | |
286 | IFDEF: USE_SSL | |
287 | DEFAULT: none | |
288 | LOC: Config.ssl_client.cipher | |
289 | TYPE: string | |
290 | DOC_START | |
291 | SSL cipher list to use when proxying https:// URLs | |
292 | DOC_END | |
293 | ||
294 | NAME: sslproxy_cafile | |
295 | IFDEF: USE_SSL | |
296 | DEFAULT: none | |
297 | LOC: Config.ssl_client.cafile | |
298 | TYPE: string | |
299 | DOC_START | |
300 | file containing CA certificates to use when verifying server | |
301 | certificates while proxying https:// URLs | |
302 | DOC_END | |
303 | ||
304 | NAME: sslproxy_capath | |
305 | IFDEF: USE_SSL | |
306 | DEFAULT: none | |
307 | LOC: Config.ssl_client.capath | |
308 | TYPE: string | |
309 | DOC_START | |
310 | directory containing CA certificates to use when verifying | |
311 | server certificates while proxying https:// URLs | |
312 | DOC_END | |
313 | ||
314 | NAME: sslproxy_flags | |
315 | IFDEF: USE_SSL | |
316 | DEFAULT: none | |
317 | LOC: Config.ssl_client.flags | |
318 | TYPE: string | |
319 | DOC_START | |
320 | Various flags modifying the use of SSL while proxying https:// URLs: | |
321 | DONT_VERIFY_PEER Accept certificates even if they fail to | |
322 | verify. | |
323 | NO_DEFAULT_CA Don't use the default CA list built in | |
324 | to OpenSSL. | |
325 | DOC_END | |
326 | ||
307b83b7 | 327 | NAME: sslpassword_program |
328 | IFDEF: USE_SSL | |
329 | DEFAULT: none | |
330 | LOC: Config.Program.ssl_password | |
331 | TYPE: string | |
332 | DOC_START | |
333 | Specify a program used for entering SSL key passphrases | |
334 | when using encrypted SSL certificate keys. If not specified | |
335 | keys must either be unencrypted, or Squid started with the -N | |
336 | option to allow it to query interactively for the passphrase. | |
337 | DOC_END | |
338 | ||
cccac0a2 | 339 | NAME: icp_port udp_port |
340 | TYPE: ushort | |
341 | DEFAULT: 0 | |
342 | LOC: Config.Port.icp | |
343 | DOC_START | |
344 | The port number where Squid sends and receives ICP queries to | |
345 | and from neighbor caches. The standard UDP port for ICP is 3130. | |
346 | Default is disabled (0). | |
347 | NOCOMMENT_START | |
58c1507a | 348 | icp_port @DEFAULT_ICP_PORT@ |
cccac0a2 | 349 | NOCOMMENT_END |
350 | DOC_END | |
351 | ||
352 | NAME: htcp_port | |
353 | IFDEF: USE_HTCP | |
354 | TYPE: ushort | |
355 | DEFAULT: 4827 | |
356 | LOC: Config.Port.htcp | |
357 | DOC_START | |
358 | The port number where Squid sends and receives HTCP queries to | |
359 | and from neighbor caches. Default is 4827. To disable use | |
360 | "0". | |
361 | DOC_END | |
362 | ||
363 | ||
364 | NAME: mcast_groups | |
365 | TYPE: wordlist | |
366 | LOC: Config.mcast_group_list | |
367 | DEFAULT: none | |
368 | DOC_START | |
369 | This tag specifies a list of multicast groups which your server | |
370 | should join to receive multicasted ICP queries. | |
371 | ||
372 | NOTE! Be very careful what you put here! Be sure you | |
373 | understand the difference between an ICP _query_ and an ICP | |
374 | _reply_. This option is to be set only if you want to RECEIVE | |
375 | multicast queries. Do NOT set this option to SEND multicast | |
376 | ICP (use cache_peer for that). ICP replies are always sent via | |
377 | unicast, so this option does not affect whether or not you will | |
378 | receive replies from multicast group members. | |
379 | ||
380 | You must be very careful to NOT use a multicast address which | |
381 | is already in use by another group of caches. | |
382 | ||
383 | If you are unsure about multicast, please read the Multicast | |
384 | chapter in the Squid FAQ (http://www.squid-cache.org/FAQ/). | |
385 | ||
386 | Usage: mcast_groups 239.128.16.128 224.0.1.20 | |
387 | ||
388 | By default, Squid doesn't listen on any multicast groups. | |
389 | DOC_END | |
390 | ||
391 | ||
392 | NAME: udp_incoming_address | |
393 | TYPE: address | |
394 | LOC:Config.Addrs.udp_incoming | |
395 | DEFAULT: 0.0.0.0 | |
396 | DOC_NONE | |
397 | ||
398 | NAME: udp_outgoing_address | |
399 | TYPE: address | |
400 | LOC: Config.Addrs.udp_outgoing | |
401 | DEFAULT: 255.255.255.255 | |
402 | DOC_START | |
403 | udp_incoming_address is used for the ICP socket receiving packets | |
404 | from other caches. | |
405 | udp_outgoing_address is used for ICP packets sent out to other | |
406 | caches. | |
407 | ||
408 | The default behavior is to not bind to any specific address. | |
409 | ||
f939c0ca | 410 | A udp_incoming_address value of 0.0.0.0 indicates Squid |
411 | should listen for UDP messages on all available interfaces. | |
cccac0a2 | 412 | |
413 | If udp_outgoing_address is set to 255.255.255.255 (the default) | |
7f7db318 | 414 | it will use the same socket as udp_incoming_address. Only |
cccac0a2 | 415 | change this if you want to have ICP queries sent using another |
416 | address than where this Squid listens for ICP queries from other | |
417 | caches. | |
418 | ||
419 | NOTE, udp_incoming_address and udp_outgoing_address can not | |
420 | have the same value since they both use port 3130. | |
421 | DOC_END | |
9e7dbc51 | 422 | |
cccac0a2 | 423 | COMMENT_START |
424 | OPTIONS WHICH AFFECT THE NEIGHBOR SELECTION ALGORITHM | |
425 | ----------------------------------------------------------------------------- | |
426 | COMMENT_END | |
9e7dbc51 | 427 | |
cccac0a2 | 428 | NAME: cache_peer |
429 | TYPE: peer | |
430 | DEFAULT: none | |
431 | LOC: Config.peers | |
432 | DOC_START | |
433 | To specify other caches in a hierarchy, use the format: | |
9e7dbc51 | 434 | |
cccac0a2 | 435 | cache_peer hostname type http_port icp_port [options] |
0fdafae7 | 436 | |
cccac0a2 | 437 | For example, |
d1b63fc8 | 438 | |
cccac0a2 | 439 | # proxy icp |
440 | # hostname type port port options | |
441 | # -------------------- -------- ----- ----- ----------- | |
442 | cache_peer parent.foo.net parent 3128 3130 [proxy-only] | |
443 | cache_peer sib1.foo.net sibling 3128 3130 [proxy-only] | |
444 | cache_peer sib2.foo.net sibling 3128 3130 [proxy-only] | |
445 | ||
446 | type: either 'parent', 'sibling', or 'multicast'. | |
447 | ||
448 | proxy_port: The port number where the cache listens for proxy | |
449 | requests. | |
450 | ||
451 | icp_port: Used for querying neighbor caches about | |
452 | objects. To have a non-ICP neighbor | |
453 | specify '7' for the ICP port and make sure the | |
454 | neighbor machine has the UDP echo port | |
455 | enabled in its /etc/inetd.conf file. | |
456 | ||
457 | options: proxy-only | |
458 | weight=n | |
459 | basetime=n | |
460 | ttl=n | |
461 | no-query | |
462 | background-ping | |
463 | default | |
464 | round-robin | |
465 | weighted-round-robin | |
466 | carp | |
467 | multicast-responder | |
468 | closest-only | |
469 | no-digest | |
470 | no-netdb-exchange | |
471 | no-delay | |
472 | login=user:password | PASS | *:password | |
473 | connect-timeout=nn | |
474 | digest-url=url | |
475 | allow-miss | |
476 | max-conn | |
477 | htcp | |
527ee50d | 478 | htcp-oldsquid |
cccac0a2 | 479 | originserver |
480 | name=xxx | |
481 | forceddomain=name | |
482 | ssl | |
483 | sslcert=/path/to/ssl/certificate | |
484 | sslkey=/path/to/ssl/key | |
485 | sslversion=1|2|3|4 | |
486 | sslcipher=... | |
487 | ssloptions=... | |
488 | front-end-https[=on|auto] | |
b8c0c06d | 489 | |
7f7db318 | 490 | use 'proxy-only' to specify objects fetched |
cccac0a2 | 491 | from this cache should not be saved locally. |
492 | ||
493 | use 'weight=n' to specify a weighted parent. | |
494 | The weight must be an integer. The default weight | |
495 | is 1, larger weights are favored more. | |
496 | ||
497 | use 'basetime=n' to specify a base amount to | |
498 | be subtracted from round trip times of parents. | |
499 | It is subtracted before division by weight in calculating | |
500 | which parent to fectch from. If the rtt is less than the | |
7f7db318 | 501 | base time the rtt is set to a minimal value. |
cccac0a2 | 502 | |
503 | use 'ttl=n' to specify a IP multicast TTL to use | |
504 | when sending an ICP queries to this address. | |
505 | Only useful when sending to a multicast group. | |
506 | Because we don't accept ICP replies from random | |
507 | hosts, you must configure other group members as | |
508 | peers with the 'multicast-responder' option below. | |
509 | ||
510 | use 'no-query' to NOT send ICP queries to this | |
511 | neighbor. | |
512 | ||
513 | use 'background-ping' to only send ICP queries to this | |
7f7db318 | 514 | neighbor infrequently. This is used to keep the neighbor |
515 | round trip time updated and is usually used in | |
cccac0a2 | 516 | conjunction with weighted-round-robin. |
517 | ||
518 | use 'default' if this is a parent cache which can | |
519 | be used as a "last-resort." You should probably | |
520 | only use 'default' in situations where you cannot | |
521 | use ICP with your parent cache(s). | |
522 | ||
523 | use 'round-robin' to define a set of parents which | |
524 | should be used in a round-robin fashion in the | |
525 | absence of any ICP queries. | |
526 | ||
7f7db318 | 527 | use 'weighted-round-robin' to define a set of parents |
528 | which should be used in a round-robin fashion with the | |
529 | frequency of each parent being based on the round trip | |
530 | time. Closer parents are used more often. | |
cccac0a2 | 531 | Usually used for background-ping parents. |
532 | ||
533 | use 'carp' to define a set of parents which should | |
7f7db318 | 534 | be used as a CARP array. The requests will be |
cccac0a2 | 535 | distributed among the parents based on the CARP load |
536 | balancing hash function based on their weigth. | |
537 | ||
7f7db318 | 538 | 'multicast-responder' indicates the named peer |
cccac0a2 | 539 | is a member of a multicast group. ICP queries will |
540 | not be sent directly to the peer, but ICP replies | |
541 | will be accepted from it. | |
542 | ||
543 | 'closest-only' indicates that, for ICP_OP_MISS | |
544 | replies, we'll only forward CLOSEST_PARENT_MISSes | |
545 | and never FIRST_PARENT_MISSes. | |
546 | ||
547 | use 'no-digest' to NOT request cache digests from | |
548 | this neighbor. | |
549 | ||
550 | 'no-netdb-exchange' disables requesting ICMP | |
551 | RTT database (NetDB) from the neighbor. | |
552 | ||
553 | use 'no-delay' to prevent access to this neighbor | |
554 | from influencing the delay pools. | |
555 | ||
556 | use 'login=user:password' if this is a personal/workgroup | |
557 | proxy and your parent requires proxy authentication. | |
558 | Note: The string can include URL escapes (i.e. %20 for | |
7f7db318 | 559 | spaces). This also means % must be written as %%. |
cccac0a2 | 560 | |
561 | use 'login=PASS' if users must authenticate against | |
65fca573 | 562 | the upstream proxy or in the case of a reverse proxy |
563 | configuration, the origin web server. This will pass | |
564 | the users credentials as they are to the peer. | |
565 | This only works for the Basic HTTP authentication scheme. | |
566 | Note: To combine this with proxy_auth both proxies must | |
567 | share the same user database as HTTP only allows for | |
568 | one proxy login. | |
7f7db318 | 569 | Also be warned this will expose your users proxy |
cccac0a2 | 570 | password to the peer. USE WITH CAUTION |
571 | ||
572 | use 'login=*:password' to pass the username to the | |
573 | upstream cache, but with a fixed password. This is meant | |
574 | to be used when the peer is in another administrative | |
575 | domain, but it is still needed to identify each user. | |
576 | The star can optionally be followed by some extra | |
577 | information which is added to the username. This can | |
578 | be used to identify this proxy to the peer, similar to | |
579 | the login=username:password option above. | |
580 | ||
581 | use 'connect-timeout=nn' to specify a peer | |
582 | specific connect timeout (also see the | |
583 | peer_connect_timeout directive) | |
584 | ||
585 | use 'digest-url=url' to tell Squid to fetch the cache | |
586 | digest (if digests are enabled) for this host from | |
587 | the specified URL rather than the Squid default | |
588 | location. | |
589 | ||
590 | use 'allow-miss' to disable Squid's use of only-if-cached | |
591 | when forwarding requests to siblings. This is primarily | |
592 | useful when icp_hit_stale is used by the sibling. To | |
593 | extensive use of this option may result in forwarding | |
594 | loops, and you should avoid having two-way peerings | |
595 | with this option. (for example to deny peer usage on | |
596 | requests from peer by denying cache_peer_access if the | |
597 | source is a peer) | |
598 | ||
599 | use 'max-conn' to limit the amount of connections Squid | |
600 | may open to this peer. | |
601 | ||
602 | use 'htcp' to send HTCP, instead of ICP, queries | |
603 | to the neighbor. You probably also want to | |
604 | set the "icp port" to 4827 instead of 3130. | |
d3803853 | 605 | |
527ee50d | 606 | use 'htcp-oldsquid' to send HTCP to old Squid versions |
607 | ||
cccac0a2 | 608 | 'originserver' causes this parent peer to be contacted as |
609 | a origin server. Meant to be used in accelerator setups. | |
610 | ||
611 | use 'name=xxx' if you have multiple peers on the same | |
7f7db318 | 612 | host but different ports. This name can be used to |
cccac0a2 | 613 | differentiate the peers in cache_peer_access and similar |
614 | directives. | |
615 | ||
616 | use 'forceddomain=name' to forcibly set the Host header | |
617 | of requests forwarded to this peer. Useful in accelerator | |
618 | setups where the server (peer) expects a certain domain | |
619 | name and using redirectors to feed this domainname | |
620 | is not feasible. | |
621 | ||
7f7db318 | 622 | use 'ssl' to indicate connections to this peer should |
cccac0a2 | 623 | bs SSL/TLS encrypted. |
624 | ||
625 | use 'sslcert=/path/to/ssl/certificate' to specify a client | |
626 | SSL certificate to use when connecting to this peer. | |
627 | ||
628 | use 'sslkey=/path/to/ssl/key' to specify the private SSL | |
629 | key corresponding to sslcert above. If 'sslkey' is not | |
7f7db318 | 630 | specified 'sslcert' is assumed to reference a |
cccac0a2 | 631 | combined file containing both the certificate and the key. |
632 | ||
633 | use sslversion=1|2|3|4 to specify the SSL version to use | |
634 | when connecting to this peer | |
635 | 1 = automatic (default) | |
636 | 2 = SSL v2 only | |
637 | 3 = SSL v3 only | |
638 | 4 = TLS v1 only | |
639 | ||
640 | use sslcipher=... to specify the list of valid SSL chipers | |
641 | to use when connecting to this peer | |
642 | ||
643 | use ssloptions=... to specify various SSL engine options: | |
644 | NO_SSLv2 Disallow the use of SSLv2 | |
645 | NO_SSLv3 Disallow the use of SSLv3 | |
646 | NO_TLSv1 Disallow the use of TLSv1 | |
647 | See src/ssl_support.c or the OpenSSL documentation for | |
648 | a more complete list. | |
649 | ||
650 | use cafile=... to specify a file containing additional | |
651 | CA certificates to use when verifying the peer certificate | |
652 | ||
653 | use capath=... to specify a directory containing additional | |
654 | CA certificates to use when verifying the peer certificate | |
655 | ||
656 | use sslflags=... to specify various flags modifying the | |
657 | SSL implementation: | |
658 | DONT_VERIFY_PEER | |
659 | Accept certificates even if they fail to | |
660 | verify. | |
7f7db318 | 661 | NO_DEFAULT_CA |
cccac0a2 | 662 | Don't use the default CA list built in |
663 | to OpenSSL. | |
664 | DONT_VERIFY_DOMAIN | |
7f7db318 | 665 | Don't verify the peer certificate |
cccac0a2 | 666 | matches the server name |
667 | ||
668 | use sslname= to specify the peer name as advertised | |
669 | in it's certificate. Used for verifying the correctness | |
670 | of the received peer certificate. If not specified the | |
671 | peer hostname will be used. | |
672 | ||
673 | use front-end-https to enable the "Front-End-Https: On" | |
674 | header needed when using Squid as a SSL frontend infront | |
675 | of Microsoft OWA. See MS KB document Q307347 for details | |
7f7db318 | 676 | on this header. If set to auto the header will |
cccac0a2 | 677 | only be added if the request is forwarded as a https:// |
678 | URL. | |
679 | ||
680 | NOTE: non-ICP neighbors must be specified as 'parent'. | |
681 | DOC_END | |
682 | ||
683 | NAME: cache_peer_domain cache_host_domain | |
684 | TYPE: hostdomain | |
685 | DEFAULT: none | |
686 | LOC: none | |
687 | DOC_START | |
688 | Use to limit the domains for which a neighbor cache will be | |
689 | queried. Usage: | |
690 | ||
691 | cache_peer_domain cache-host domain [domain ...] | |
692 | cache_peer_domain cache-host !domain | |
693 | ||
694 | For example, specifying | |
695 | ||
696 | cache_peer_domain parent.foo.net .edu | |
697 | ||
698 | has the effect such that UDP query packets are sent to | |
699 | 'bigserver' only when the requested object exists on a | |
700 | server in the .edu domain. Prefixing the domainname | |
7f7db318 | 701 | with '!' means the cache will be queried for objects |
cccac0a2 | 702 | NOT in that domain. |
703 | ||
704 | NOTE: * Any number of domains may be given for a cache-host, | |
705 | either on the same or separate lines. | |
706 | * When multiple domains are given for a particular | |
707 | cache-host, the first matched domain is applied. | |
708 | * Cache hosts with no domain restrictions are queried | |
709 | for all requests. | |
710 | * There are no defaults. | |
711 | * There is also a 'cache_peer_access' tag in the ACL | |
712 | section. | |
713 | DOC_END | |
714 | ||
715 | ||
716 | NAME: neighbor_type_domain | |
717 | TYPE: hostdomaintype | |
718 | DEFAULT: none | |
719 | LOC: none | |
720 | DOC_START | |
721 | usage: neighbor_type_domain neighbor parent|sibling domain domain ... | |
722 | ||
723 | Modifying the neighbor type for specific domains is now | |
724 | possible. You can treat some domains differently than the the | |
725 | default neighbor type specified on the 'cache_peer' line. | |
726 | Normally it should only be necessary to list domains which | |
727 | should be treated differently because the default neighbor type | |
728 | applies for hostnames which do not match domains listed here. | |
729 | ||
730 | EXAMPLE: | |
731 | cache_peer parent cache.foo.org 3128 3130 | |
732 | neighbor_type_domain cache.foo.org sibling .com .net | |
733 | neighbor_type_domain cache.foo.org sibling .au .de | |
734 | DOC_END | |
735 | ||
736 | NAME: icp_query_timeout | |
737 | COMMENT: (msec) | |
738 | DEFAULT: 0 | |
739 | TYPE: int | |
740 | LOC: Config.Timeout.icp_query | |
741 | DOC_START | |
742 | Normally Squid will automatically determine an optimal ICP | |
743 | query timeout value based on the round-trip-time of recent ICP | |
744 | queries. If you want to override the value determined by | |
745 | Squid, set this 'icp_query_timeout' to a non-zero value. This | |
746 | value is specified in MILLISECONDS, so, to use a 2-second | |
747 | timeout (the old default), you would write: | |
748 | ||
749 | icp_query_timeout 2000 | |
750 | DOC_END | |
751 | ||
752 | NAME: maximum_icp_query_timeout | |
753 | COMMENT: (msec) | |
754 | DEFAULT: 2000 | |
755 | TYPE: int | |
756 | LOC: Config.Timeout.icp_query_max | |
757 | DOC_START | |
758 | Normally the ICP query timeout is determined dynamically. But | |
759 | sometimes it can lead to very large values (say 5 seconds). | |
760 | Use this option to put an upper limit on the dynamic timeout | |
761 | value. Do NOT use this option to always use a fixed (instead | |
762 | of a dynamic) timeout value. To set a fixed timeout see the | |
763 | 'icp_query_timeout' directive. | |
764 | DOC_END | |
765 | ||
766 | NAME: minimum_icp_query_timeout | |
767 | COMMENT: (msec) | |
768 | DEFAULT: 5 | |
769 | TYPE: int | |
770 | LOC: Config.Timeout.icp_query_min | |
771 | DOC_START | |
772 | Normally the ICP query timeout is determined dynamically. But | |
773 | sometimes it can lead to very small timeouts, even lower than | |
774 | the normal latency variance on your link due to traffic. | |
775 | Use this option to put an lower limit on the dynamic timeout | |
776 | value. Do NOT use this option to always use a fixed (instead | |
777 | of a dynamic) timeout value. To set a fixed timeout see the | |
778 | 'icp_query_timeout' directive. | |
779 | DOC_END | |
780 | ||
781 | NAME: mcast_icp_query_timeout | |
782 | COMMENT: (msec) | |
783 | DEFAULT: 2000 | |
784 | TYPE: int | |
785 | LOC: Config.Timeout.mcast_icp_query | |
786 | DOC_START | |
787 | For Multicast peers, Squid regularly sends out ICP "probes" to | |
788 | count how many other peers are listening on the given multicast | |
789 | address. This value specifies how long Squid should wait to | |
790 | count all the replies. The default is 2000 msec, or 2 | |
791 | seconds. | |
792 | DOC_END | |
793 | ||
794 | NAME: dead_peer_timeout | |
795 | COMMENT: (seconds) | |
796 | DEFAULT: 10 seconds | |
797 | TYPE: time_t | |
798 | LOC: Config.Timeout.deadPeer | |
799 | DOC_START | |
800 | This controls how long Squid waits to declare a peer cache | |
801 | as "dead." If there are no ICP replies received in this | |
802 | amount of time, Squid will declare the peer dead and not | |
803 | expect to receive any further ICP replies. However, it | |
804 | continues to send ICP queries, and will mark the peer as | |
805 | alive upon receipt of the first subsequent ICP reply. | |
806 | ||
807 | This timeout also affects when Squid expects to receive ICP | |
808 | replies from peers. If more than 'dead_peer' seconds have | |
809 | passed since the last ICP reply was received, Squid will not | |
810 | expect to receive an ICP reply on the next query. Thus, if | |
811 | your time between requests is greater than this timeout, you | |
812 | will see a lot of requests sent DIRECT to origin servers | |
813 | instead of to your parents. | |
814 | DOC_END | |
815 | ||
816 | ||
817 | NAME: hierarchy_stoplist | |
818 | TYPE: wordlist | |
819 | DEFAULT: none | |
820 | LOC: Config.hierarchy_stoplist | |
821 | DOC_START | |
822 | A list of words which, if found in a URL, cause the object to | |
823 | be handled directly by this cache. In other words, use this | |
824 | to not query neighbor caches for certain objects. You may | |
825 | list this option multiple times. | |
826 | NOCOMMENT_START | |
827 | #We recommend you to use at least the following line. | |
828 | hierarchy_stoplist cgi-bin ? | |
829 | NOCOMMENT_END | |
830 | DOC_END | |
934b03fc | 831 | |
6a566b9c | 832 | |
6192e873 | 833 | NAME: cache no_cache |
cccac0a2 | 834 | TYPE: acl_access |
835 | DEFAULT: none | |
836 | LOC: Config.accessList.noCache | |
837 | DOC_START | |
838 | A list of ACL elements which, if matched, cause the request to | |
839 | not be satisfied from the cache and the reply to not be cached. | |
840 | In other words, use this to force certain objects to never be cached. | |
6a566b9c | 841 | |
cccac0a2 | 842 | You must use the word 'DENY' to indicate the ACL names which should |
843 | NOT be cached. | |
1e5562e3 | 844 | |
6192e873 | 845 | Default is to allow all to be cached |
cccac0a2 | 846 | NOCOMMENT_START |
847 | #We recommend you to use the following two lines. | |
848 | acl QUERY urlpath_regex cgi-bin \? | |
6192e873 | 849 | cache deny QUERY |
cccac0a2 | 850 | NOCOMMENT_END |
851 | DOC_END | |
852 | ||
853 | NAME: background_ping_rate | |
854 | COMMENT: time-units | |
855 | TYPE: time_t | |
856 | DEFAULT: 10 seconds | |
857 | LOC: Config.backgroundPingRate | |
858 | DOC_START | |
859 | Controls how often the ICP pings are sent to siblings that | |
860 | have background-ping set. | |
861 | DOC_END | |
1e5562e3 | 862 | |
934b03fc | 863 | |
cccac0a2 | 864 | COMMENT_START |
865 | OPTIONS WHICH AFFECT THE CACHE SIZE | |
866 | ----------------------------------------------------------------------------- | |
867 | COMMENT_END | |
868 | ||
869 | NAME: cache_mem | |
870 | COMMENT: (bytes) | |
871 | TYPE: b_size_t | |
872 | DEFAULT: 8 MB | |
873 | LOC: Config.memMaxSize | |
874 | DOC_START | |
875 | NOTE: THIS PARAMETER DOES NOT SPECIFY THE MAXIMUM PROCESS SIZE. | |
876 | IT ONLY PLACES A LIMIT ON HOW MUCH ADDITIONAL MEMORY SQUID WILL | |
877 | USE AS A MEMORY CACHE OF OBJECTS. SQUID USES MEMORY FOR OTHER | |
878 | THINGS AS WELL. SEE THE SQUID FAQ SECTION 8 FOR DETAILS. | |
879 | ||
880 | 'cache_mem' specifies the ideal amount of memory to be used | |
881 | for: | |
882 | * In-Transit objects | |
883 | * Hot Objects | |
884 | * Negative-Cached objects | |
885 | ||
886 | Data for these objects are stored in 4 KB blocks. This | |
887 | parameter specifies the ideal upper limit on the total size of | |
888 | 4 KB blocks allocated. In-Transit objects take the highest | |
889 | priority. | |
890 | ||
891 | In-transit objects have priority over the others. When | |
892 | additional space is needed for incoming data, negative-cached | |
893 | and hot objects will be released. In other words, the | |
894 | negative-cached and hot objects will fill up any unused space | |
895 | not needed for in-transit objects. | |
896 | ||
897 | If circumstances require, this limit will be exceeded. | |
898 | Specifically, if your incoming request rate requires more than | |
899 | 'cache_mem' of memory to hold in-transit objects, Squid will | |
900 | exceed this limit to satisfy the new requests. When the load | |
901 | decreases, blocks will be freed until the high-water mark is | |
902 | reached. Thereafter, blocks will be used to store hot | |
903 | objects. | |
904 | DOC_END | |
905 | ||
906 | ||
907 | NAME: cache_swap_low | |
908 | COMMENT: (percent, 0-100) | |
909 | TYPE: int | |
910 | DEFAULT: 90 | |
911 | LOC: Config.Swap.lowWaterMark | |
912 | DOC_NONE | |
913 | ||
914 | NAME: cache_swap_high | |
915 | COMMENT: (percent, 0-100) | |
916 | TYPE: int | |
917 | DEFAULT: 95 | |
918 | LOC: Config.Swap.highWaterMark | |
919 | DOC_START | |
920 | ||
921 | The low- and high-water marks for cache object replacement. | |
922 | Replacement begins when the swap (disk) usage is above the | |
923 | low-water mark and attempts to maintain utilization near the | |
924 | low-water mark. As swap utilization gets close to high-water | |
925 | mark object eviction becomes more aggressive. If utilization is | |
926 | close to the low-water mark less replacement is done each time. | |
7f7db318 | 927 | |
cccac0a2 | 928 | Defaults are 90% and 95%. If you have a large cache, 5% could be |
929 | hundreds of MB. If this is the case you may wish to set these | |
930 | numbers closer together. | |
931 | DOC_END | |
932 | ||
933 | NAME: maximum_object_size | |
934 | COMMENT: (bytes) | |
935 | TYPE: b_size_t | |
936 | DEFAULT: 4096 KB | |
937 | LOC: Config.Store.maxObjectSize | |
938 | DOC_START | |
939 | Objects larger than this size will NOT be saved on disk. The | |
940 | value is specified in kilobytes, and the default is 4MB. If | |
941 | you wish to get a high BYTES hit ratio, you should probably | |
942 | increase this (one 32 MB object hit counts for 3200 10KB | |
943 | hits). If you wish to increase speed more than your want to | |
944 | save bandwidth you should leave this low. | |
945 | ||
946 | NOTE: if using the LFUDA replacement policy you should increase | |
947 | this value to maximize the byte hit rate improvement of LFUDA! | |
948 | See replacement_policy below for a discussion of this policy. | |
949 | DOC_END | |
950 | ||
951 | NAME: minimum_object_size | |
952 | COMMENT: (bytes) | |
953 | TYPE: b_size_t | |
954 | DEFAULT: 0 KB | |
955 | LOC: Config.Store.minObjectSize | |
956 | DOC_START | |
957 | Objects smaller than this size will NOT be saved on disk. The | |
958 | value is specified in kilobytes, and the default is 0 KB, which | |
959 | means there is no minimum. | |
960 | DOC_END | |
961 | ||
962 | NAME: maximum_object_size_in_memory | |
963 | COMMENT: (bytes) | |
964 | TYPE: b_size_t | |
965 | DEFAULT: 8 KB | |
966 | LOC: Config.Store.maxInMemObjSize | |
967 | DOC_START | |
6845f129 | 968 | Objects greater than this size will not be attempted to kept in |
969 | the memory cache. This should be set high enough to keep objects | |
970 | accessed frequently in memory to improve performance whilst low | |
971 | enough to keep larger objects from hoarding cache_mem . | |
cccac0a2 | 972 | DOC_END |
973 | ||
974 | NAME: ipcache_size | |
975 | COMMENT: (number of entries) | |
976 | TYPE: int | |
977 | DEFAULT: 1024 | |
978 | LOC: Config.ipcache.size | |
979 | DOC_NONE | |
980 | ||
981 | NAME: ipcache_low | |
982 | COMMENT: (percent) | |
983 | TYPE: int | |
984 | DEFAULT: 90 | |
985 | LOC: Config.ipcache.low | |
986 | DOC_NONE | |
987 | ||
988 | NAME: ipcache_high | |
989 | COMMENT: (percent) | |
990 | TYPE: int | |
991 | DEFAULT: 95 | |
992 | LOC: Config.ipcache.high | |
993 | DOC_START | |
994 | The size, low-, and high-water marks for the IP cache. | |
995 | DOC_END | |
996 | ||
997 | NAME: fqdncache_size | |
998 | COMMENT: (number of entries) | |
999 | TYPE: int | |
1000 | DEFAULT: 1024 | |
1001 | LOC: Config.fqdncache.size | |
1002 | DOC_START | |
1003 | Maximum number of FQDN cache entries. | |
1004 | DOC_END | |
1005 | ||
1006 | NAME: cache_replacement_policy | |
1007 | TYPE: removalpolicy | |
1008 | LOC: Config.replPolicy | |
1009 | DEFAULT: lru | |
1010 | DOC_START | |
1011 | The cache replacement policy parameter determines which | |
1012 | objects are evicted (replaced) when disk space is needed. | |
1013 | ||
1014 | lru : Squid's original list based LRU policy | |
1015 | heap GDSF : Greedy-Dual Size Frequency | |
1016 | heap LFUDA: Least Frequently Used with Dynamic Aging | |
1017 | heap LRU : LRU policy implemented using a heap | |
1018 | ||
1019 | Applies to any cache_dir lines listed below this. | |
1020 | ||
1021 | The LRU policies keeps recently referenced objects. | |
1022 | ||
1023 | The heap GDSF policy optimizes object hit rate by keeping smaller | |
1024 | popular objects in cache so it has a better chance of getting a | |
1025 | hit. It achieves a lower byte hit rate than LFUDA though since | |
1026 | it evicts larger (possibly popular) objects. | |
1027 | ||
1028 | The heap LFUDA policy keeps popular objects in cache regardless of | |
1029 | their size and thus optimizes byte hit rate at the expense of | |
1030 | hit rate since one large, popular object will prevent many | |
1031 | smaller, slightly less popular objects from being cached. | |
1032 | ||
1033 | Both policies utilize a dynamic aging mechanism that prevents | |
1034 | cache pollution that can otherwise occur with frequency-based | |
1035 | replacement policies. | |
1036 | ||
1037 | NOTE: if using the LFUDA replacement policy you should increase | |
1038 | the value of maximum_object_size above its default of 4096 KB to | |
1039 | to maximize the potential byte hit rate improvement of LFUDA. | |
1040 | ||
1041 | For more information about the GDSF and LFUDA cache replacement | |
1042 | policies see http://www.hpl.hp.com/techreports/1999/HPL-1999-69.html | |
1043 | and http://fog.hpl.external.hp.com/techreports/98/HPL-98-173.html. | |
1044 | DOC_END | |
1045 | ||
1046 | NAME: memory_replacement_policy | |
1047 | TYPE: removalpolicy | |
1048 | LOC: Config.memPolicy | |
1049 | DEFAULT: lru | |
1050 | DOC_START | |
1051 | The memory replacement policy parameter determines which | |
1052 | objects are purged from memory when memory space is needed. | |
1053 | ||
1054 | See cache_replacement_policy for details. | |
1055 | DOC_END | |
934b03fc | 1056 | |
1f7c9178 | 1057 | |
cccac0a2 | 1058 | COMMENT_START |
1059 | LOGFILE PATHNAMES AND CACHE DIRECTORIES | |
1060 | ----------------------------------------------------------------------------- | |
1061 | COMMENT_END | |
9bc73deb | 1062 | |
cccac0a2 | 1063 | NAME: cache_dir |
1064 | TYPE: cachedir | |
1065 | DEFAULT: none | |
1066 | DEFAULT_IF_NONE: ufs @DEFAULT_SWAP_DIR@ 100 16 256 | |
1067 | LOC: Config.cacheSwap | |
1068 | DOC_START | |
1069 | Usage: | |
7f7db318 | 1070 | |
cccac0a2 | 1071 | cache_dir Type Directory-Name Fs-specific-data [options] |
cf5cc17e | 1072 | |
cccac0a2 | 1073 | You can specify multiple cache_dir lines to spread the |
1074 | cache among different disk partitions. | |
8e8d4f30 | 1075 | |
cccac0a2 | 1076 | Type specifies the kind of storage system to use. Only "ufs" |
5ac1a5b3 | 1077 | is built by default. To enable any of the other storage systems |
cccac0a2 | 1078 | see the --enable-storeio configure option. |
934b03fc | 1079 | |
cccac0a2 | 1080 | 'Directory' is a top-level directory where cache swap |
1081 | files will be stored. If you want to use an entire disk | |
7f7db318 | 1082 | for caching, this can be the mount-point directory. |
cccac0a2 | 1083 | The directory must exist and be writable by the Squid |
1084 | process. Squid will NOT create this directory for you. | |
1e5562e3 | 1085 | |
cccac0a2 | 1086 | The ufs store type: |
1087 | ||
1088 | "ufs" is the old well-known Squid storage format that has always | |
1089 | been there. | |
1090 | ||
1091 | cache_dir ufs Directory-Name Mbytes L1 L2 [options] | |
1092 | ||
1093 | 'Mbytes' is the amount of disk space (MB) to use under this | |
1094 | directory. The default is 100 MB. Change this to suit your | |
1095 | configuration. Do NOT put the size of your disk drive here. | |
1096 | Instead, if you want Squid to use the entire disk drive, | |
1097 | subtract 20% and use that value. | |
1098 | ||
1099 | 'Level-1' is the number of first-level subdirectories which | |
1100 | will be created under the 'Directory'. The default is 16. | |
1101 | ||
1102 | 'Level-2' is the number of second-level subdirectories which | |
1103 | will be created under each first-level directory. The default | |
1104 | is 256. | |
1105 | ||
1106 | The aufs store type: | |
1107 | ||
1108 | "aufs" uses the same storage format as "ufs", utilizing | |
1109 | POSIX-threads to avoid blocking the main Squid process on | |
1110 | disk-I/O. This was formerly known in Squid as async-io. | |
1111 | ||
1112 | cache_dir aufs Directory-Name Mbytes L1 L2 [options] | |
1113 | ||
1114 | see argument descriptions under ufs above | |
1115 | ||
1116 | The diskd store type: | |
1117 | ||
1118 | "diskd" uses the same storage format as "ufs", utilizing a | |
1119 | separate process to avoid blocking the main Squid process on | |
1120 | disk-I/O. | |
1121 | ||
1122 | cache_dir diskd Directory-Name Mbytes L1 L2 [options] [Q1=n] [Q2=n] | |
1123 | ||
1124 | see argument descriptions under ufs above | |
1125 | ||
1126 | Q1 specifies the number of unacknowledged I/O requests when Squid | |
1127 | stops opening new files. If this many messages are in the queues, | |
1128 | Squid won't open new files. Default is 64 | |
1129 | ||
1130 | Q2 specifies the number of unacknowledged messages when Squid | |
1131 | starts blocking. If this many messages are in the queues, | |
44f991b5 | 1132 | Squid blocks until it receives some replies. Default is 72 |
cccac0a2 | 1133 | |
af9ad249 | 1134 | When Q1 < Q2 (the default), the cache directory is optimized |
1135 | for lower response time at the expense of a decrease in hit | |
1136 | ratio. If Q1 > Q2, the cache directory is optimized for | |
1137 | higher hit ratio at the expense of an increase in response | |
1138 | time. | |
1139 | ||
1a224843 | 1140 | The coss store type: |
1141 | ||
1142 | block-size=n defines the "block size" for COSS cache_dir's. | |
1143 | Squid uses file numbers as block numbers. Since file numbers | |
1144 | are limited to 24 bits, the block size determines the maximum | |
1145 | size of the COSS partition. The default is 512 bytes, which | |
1146 | leads to a maximum cache_dir size of 512<<24, or 8 GB. Note | |
7f7db318 | 1147 | you should not change the coss block size after Squid |
1a224843 | 1148 | has written some objects to the cache_dir. |
1149 | ||
b8c0c06d | 1150 | The coss file store has changed from 2.5. Now it uses a file |
c8f4eac4 | 1151 | called 'stripe' in the directory names in the config - and |
1152 | this will be created by squid -z. | |
1153 | ||
cccac0a2 | 1154 | Common options: |
1155 | ||
1156 | read-only, this cache_dir is read only. | |
1157 | ||
1158 | max-size=n, refers to the max object size this storedir supports. | |
1159 | It is used to initially choose the storedir to dump the object. | |
1160 | Note: To make optimal use of the max-size limits you should order | |
1161 | the cache_dir lines with the smallest max-size value first and the | |
1162 | ones with no max-size specification last. | |
1a224843 | 1163 | |
7f7db318 | 1164 | Note for coss, max-size must be less than COSS_MEMBUF_SZ, |
1a224843 | 1165 | which can be changed with the --with-coss-membuf-size=N configure |
1166 | option. | |
c8f4eac4 | 1167 | |
1168 | The null store type: | |
1169 | ||
1170 | no options are allowed or required | |
cccac0a2 | 1171 | DOC_END |
1172 | ||
1173 | ||
1174 | NAME: logformat | |
1175 | TYPE: logformat | |
1176 | LOC: Config.Log.logformats | |
1177 | DEFAULT: none | |
1178 | DOC_START | |
1179 | Usage: | |
1180 | ||
1181 | logformat <name> <format specification> | |
1182 | ||
1183 | Defines an access log format. | |
1184 | ||
1185 | The <format specification> is a string with embedded % format codes | |
7f7db318 | 1186 | |
cccac0a2 | 1187 | % format codes all follow the same basic structure where all but |
fa38076e | 1188 | the formatcode is optional. Output strings are automatically escaped |
cccac0a2 | 1189 | as required according to their context and the output format |
fa38076e | 1190 | modifiers are usually not needed, but can be specified if an explicit |
1191 | output format is desired. | |
cccac0a2 | 1192 | |
1193 | % ["|[|'|#] [-] [[0]width] [{argument}] formatcode | |
7f7db318 | 1194 | |
fa38076e | 1195 | " output in quoted string format |
1196 | [ output in squid text log format as used by log_mime_hdrs | |
1197 | # output in URL quoted format | |
1198 | ' output as-is | |
1199 | ||
cccac0a2 | 1200 | - left aligned |
7f7db318 | 1201 | width field width. If starting with 0 the |
cccac0a2 | 1202 | output is zero padded |
1203 | {arg} argument such as header name etc | |
1204 | ||
1205 | Format codes: | |
1206 | ||
1207 | >a Client source IP address | |
1208 | >A Client FQDN | |
1209 | <A Server IP address or peer name | |
1210 | la Local IP address (http_port) | |
1211 | lp Local port number (http_port) | |
1212 | ts Seconds since epoch | |
1213 | tu subsecond time (milliseconds) | |
1214 | tl Local time. Optional strftime format argument | |
1215 | default %d/%b/%Y:%H:%M:S %z | |
1216 | tg GMT time. Optional strftime format argument | |
1217 | default %d/%b/%Y:%H:%M:S %z | |
1218 | tr Response time (milliseconds) | |
1219 | >h Request header. Optional header name argument | |
1220 | on the format header[:[separator]element] | |
1221 | <h Reply header. Optional header name argument | |
1222 | as for >h | |
1223 | un User name | |
1224 | ul User login | |
1225 | ui User ident | |
1226 | ue User from external acl | |
1227 | Hs HTTP status code | |
1228 | Ss Squid request status (TCP_MISS etc) | |
1229 | Sh Squid hierarchy status (DEFAULT_PARENT etc) | |
1230 | mt MIME content type | |
1231 | rm Request method (GET/POST etc) | |
1232 | ru Request URL | |
1233 | rv Request protocol version | |
1234 | et Tag returned by external acl | |
1235 | ea Log string returned by external acl | |
1236 | <st Reply size including HTTP headers | |
6845f129 | 1237 | <sH Reply high offset sent |
03b29b6c | 1238 | <sS Upstream object size |
cccac0a2 | 1239 | % a literal % character |
1240 | ||
1241 | logformat squid %ts.%03tu %6tr %>a %Ss/%03Hs %<st %rm %ru %un %Sh/%<A %mt | |
1242 | logformat squidmime %ts.%03tu %6tr %>a %Ss/%03Hs %<st %rm %ru %un %Sh/%<A %mt [%>h] [%<h] | |
1243 | logformat common %>a %ui %un [%tl] "%rm %ru HTTP/%rv" %Hs %<st %Ss:%Sh | |
1244 | logformat combined %>a %ui %un [%tl] "%rm %ru HTTP/%rv" %Hs %<st "%{Referer}>h" "%{User-Agent}>h" %Ss:%Sh | |
1245 | DOC_END | |
1246 | ||
1247 | NAME: access_log cache_access_log | |
1248 | TYPE: access_log | |
1249 | LOC: Config.Log.accesslogs | |
1250 | DEFAULT: none | |
1251 | DEFAULT_IF_NONE: @DEFAULT_ACCESS_LOG@ | |
1252 | DOC_START | |
1253 | These files log client request activities. Has a line every HTTP or | |
1254 | ICP request. The format is: | |
1255 | access_log <filepath> [<logformat name> [acl acl ...]] | |
1256 | access_log none [acl acl ...]] | |
1257 | ||
1258 | Will log to the specified file using the specified format (which | |
1259 | must be defined in a logformat directive) those entries which match | |
1260 | ALL the acl's specified (which must be defined in acl clauses). | |
1261 | If no acl is specified, all requests will be logged to this file. | |
7f7db318 | 1262 | |
c33aa074 | 1263 | To disable logging of a request use the filepath "none", in which case |
1264 | a logformat name should not be specified. | |
1265 | ||
9197cd13 | 1266 | To log the request via syslog specify a filepath of "syslog": |
1267 | ||
1268 | access_log syslog[:facility|priority] [format [acl1 [acl2 ....]]] | |
1269 | where facility could be any of: | |
1270 | LOG_AUTHPRIV, LOG_DAEMON, LOG_LOCAL0 .. LOG_LOCAL7 or LOG_USER. | |
1271 | ||
1272 | And priority could be any of: | |
1273 | LOG_ERR, LOG_WARNING, LOG_NOTICE, LOG_INFO, LOG_DEBUG. | |
cccac0a2 | 1274 | DOC_END |
1275 | ||
1276 | ||
1277 | NAME: cache_log | |
1278 | TYPE: string | |
1279 | DEFAULT: @DEFAULT_CACHE_LOG@ | |
1280 | LOC: Config.Log.log | |
1281 | DOC_START | |
1282 | Cache logging file. This is where general information about | |
1283 | your cache's behavior goes. You can increase the amount of data | |
1284 | logged to this file with the "debug_options" tag below. | |
1285 | DOC_END | |
1286 | ||
1287 | ||
1288 | NAME: cache_store_log | |
1289 | TYPE: string | |
1290 | DEFAULT: @DEFAULT_STORE_LOG@ | |
1291 | LOC: Config.Log.store | |
1292 | DOC_START | |
1293 | Logs the activities of the storage manager. Shows which | |
1294 | objects are ejected from the cache, and which objects are | |
1295 | saved and for how long. To disable, enter "none". There are | |
1296 | not really utilities to analyze this data, so you can safely | |
1297 | disable it. | |
1298 | DOC_END | |
1299 | ||
1300 | ||
e2529a2c | 1301 | NAME: cache_swap_state cache_swap_log |
cccac0a2 | 1302 | TYPE: string |
1303 | LOC: Config.Log.swap | |
1304 | DEFAULT: none | |
1305 | DOC_START | |
e2529a2c | 1306 | Location for the cache "swap.state" file. This index file holds |
1307 | the metadata of objects saved on disk. It is used to rebuild | |
1308 | the cache during startup. Normally this file resides in each | |
cccac0a2 | 1309 | 'cache_dir' directory, but you may specify an alternate |
1310 | pathname here. Note you must give a full filename, not just | |
1311 | a directory. Since this is the index for the whole object | |
1312 | list you CANNOT periodically rotate it! | |
1313 | ||
7f7db318 | 1314 | If %s can be used in the file name it will be replaced with a |
cccac0a2 | 1315 | a representation of the cache_dir name where each / is replaced |
1316 | with '.'. This is needed to allow adding/removing cache_dir | |
1317 | lines when cache_swap_log is being used. | |
7f7db318 | 1318 | |
cccac0a2 | 1319 | If have more than one 'cache_dir', and %s is not used in the name |
7f7db318 | 1320 | these swap logs will have names such as: |
cccac0a2 | 1321 | |
1322 | cache_swap_log.00 | |
1323 | cache_swap_log.01 | |
1324 | cache_swap_log.02 | |
1325 | ||
1326 | The numbered extension (which is added automatically) | |
1327 | corresponds to the order of the 'cache_dir' lines in this | |
1328 | configuration file. If you change the order of the 'cache_dir' | |
7f7db318 | 1329 | lines in this file, these log files will NOT correspond to |
cccac0a2 | 1330 | the correct 'cache_dir' entry (unless you manually rename |
7f7db318 | 1331 | them). We recommend you do NOT use this option. It is |
cccac0a2 | 1332 | better to keep these log files in each 'cache_dir' directory. |
1333 | DOC_END | |
1334 | ||
1335 | ||
1336 | NAME: emulate_httpd_log | |
1337 | COMMENT: on|off | |
1338 | TYPE: onoff | |
1339 | DEFAULT: off | |
1340 | LOC: Config.onoff.common_log | |
1341 | DOC_START | |
1342 | The Cache can emulate the log file format which many 'httpd' | |
1343 | programs use. To disable/enable this emulation, set | |
1344 | emulate_httpd_log to 'off' or 'on'. The default | |
1345 | is to use the native log format since it includes useful | |
7f7db318 | 1346 | information Squid-specific log analyzers use. |
cccac0a2 | 1347 | DOC_END |
1348 | ||
1349 | NAME: log_ip_on_direct | |
1350 | COMMENT: on|off | |
1351 | TYPE: onoff | |
1352 | DEFAULT: on | |
1353 | LOC: Config.onoff.log_ip_on_direct | |
1354 | DOC_START | |
1355 | Log the destination IP address in the hierarchy log tag when going | |
1356 | direct. Earlier Squid versions logged the hostname here. If you | |
1357 | prefer the old way set this to off. | |
1358 | DOC_END | |
1359 | ||
1360 | NAME: mime_table | |
1361 | TYPE: string | |
1362 | DEFAULT: @DEFAULT_MIME_TABLE@ | |
1363 | LOC: Config.mimeTablePathname | |
1364 | DOC_START | |
1365 | Pathname to Squid's MIME table. You shouldn't need to change | |
1366 | this, but the default file contains examples and formatting | |
1367 | information if you do. | |
1368 | DOC_END | |
1369 | ||
1370 | ||
1371 | NAME: log_mime_hdrs | |
1372 | COMMENT: on|off | |
1373 | TYPE: onoff | |
1374 | LOC: Config.onoff.log_mime_hdrs | |
1375 | DEFAULT: off | |
1376 | DOC_START | |
1377 | The Cache can record both the request and the response MIME | |
1378 | headers for each HTTP transaction. The headers are encoded | |
1379 | safely and will appear as two bracketed fields at the end of | |
1380 | the access log (for either the native or httpd-emulated log | |
1381 | formats). To enable this logging set log_mime_hdrs to 'on'. | |
1382 | DOC_END | |
1383 | ||
1384 | ||
1385 | NAME: useragent_log | |
1386 | TYPE: string | |
1387 | LOC: Config.Log.useragent | |
1388 | DEFAULT: none | |
1389 | IFDEF: USE_USERAGENT_LOG | |
1390 | DOC_START | |
1391 | Squid will write the User-Agent field from HTTP requests | |
1392 | to the filename specified here. By default useragent_log | |
1393 | is disabled. | |
1394 | DOC_END | |
1395 | ||
1396 | ||
1397 | NAME: referer_log | |
1398 | TYPE: string | |
1399 | LOC: Config.Log.referer | |
1400 | DEFAULT: none | |
1401 | IFDEF: USE_REFERER_LOG | |
1402 | DOC_START | |
1403 | Squid will write the Referer field from HTTP requests to the | |
1404 | filename specified here. By default referer_log is disabled. | |
1405 | DOC_END | |
1406 | ||
1407 | ||
1408 | NAME: pid_filename | |
1409 | TYPE: string | |
1410 | DEFAULT: @DEFAULT_PID_FILE@ | |
1411 | LOC: Config.pidFilename | |
1412 | DOC_START | |
1413 | A filename to write the process-id to. To disable, enter "none". | |
1414 | DOC_END | |
1415 | ||
1416 | ||
1417 | NAME: debug_options | |
d9e04dc7 | 1418 | TYPE: debug |
cccac0a2 | 1419 | DEFAULT: ALL,1 |
1420 | LOC: Config.debugOptions | |
1421 | DOC_START | |
1422 | Logging options are set as section,level where each source file | |
1423 | is assigned a unique section. Lower levels result in less | |
1424 | output, Full debugging (level 9) can result in a very large | |
1425 | log file, so be careful. The magic word "ALL" sets debugging | |
1426 | levels for all sections. We recommend normally running with | |
1427 | "ALL,1". | |
1428 | DOC_END | |
1429 | ||
1430 | ||
1431 | NAME: log_fqdn | |
1432 | COMMENT: on|off | |
1433 | TYPE: onoff | |
1434 | DEFAULT: off | |
1435 | LOC: Config.onoff.log_fqdn | |
1436 | DOC_START | |
1437 | Turn this on if you wish to log fully qualified domain names | |
1438 | in the access.log. To do this Squid does a DNS lookup of all | |
1439 | IP's connecting to it. This can (in some situations) increase | |
1440 | latency, which makes your cache seem slower for interactive | |
1441 | browsing. | |
1442 | DOC_END | |
1443 | ||
1444 | ||
1445 | NAME: client_netmask | |
1446 | TYPE: address | |
1447 | LOC: Config.Addrs.client_netmask | |
1448 | DEFAULT: 255.255.255.255 | |
1449 | DOC_START | |
1450 | A netmask for client addresses in logfiles and cachemgr output. | |
1451 | Change this to protect the privacy of your cache clients. | |
1452 | A netmask of 255.255.255.0 will log all IP's in that range with | |
1453 | the last digit set to '0'. | |
1454 | DOC_END | |
0976f8db | 1455 | |
0976f8db | 1456 | |
cccac0a2 | 1457 | COMMENT_START |
1458 | OPTIONS FOR EXTERNAL SUPPORT PROGRAMS | |
1459 | ----------------------------------------------------------------------------- | |
1460 | COMMENT_END | |
1461 | ||
1462 | NAME: ftp_user | |
1463 | TYPE: string | |
1464 | DEFAULT: Squid@ | |
1465 | LOC: Config.Ftp.anon_user | |
1466 | DOC_START | |
1467 | If you want the anonymous login password to be more informative | |
1468 | (and enable the use of picky ftp servers), set this to something | |
1469 | reasonable for your domain, like wwwuser@somewhere.net | |
1470 | ||
7f7db318 | 1471 | The reason why this is domainless by default is the |
cccac0a2 | 1472 | request can be made on the behalf of a user in any domain, |
1473 | depending on how the cache is used. | |
7f7db318 | 1474 | Some ftp server also validate the email address is valid |
cccac0a2 | 1475 | (for example perl.com). |
1476 | DOC_END | |
1477 | ||
1478 | NAME: ftp_list_width | |
1479 | TYPE: size_t | |
1480 | DEFAULT: 32 | |
1481 | LOC: Config.Ftp.list_width | |
1482 | DOC_START | |
1483 | Sets the width of ftp listings. This should be set to fit in | |
1484 | the width of a standard browser. Setting this too small | |
1485 | can cut off long filenames when browsing ftp sites. | |
1486 | DOC_END | |
1487 | ||
1488 | NAME: ftp_passive | |
1489 | TYPE: onoff | |
1490 | DEFAULT: on | |
1491 | LOC: Config.Ftp.passive | |
1492 | DOC_START | |
1493 | If your firewall does not allow Squid to use passive | |
7f7db318 | 1494 | connections, turn off this option. |
cccac0a2 | 1495 | DOC_END |
1496 | ||
1497 | NAME: ftp_sanitycheck | |
1498 | TYPE: onoff | |
1499 | DEFAULT: on | |
1500 | LOC: Config.Ftp.sanitycheck | |
1501 | DOC_START | |
1502 | For security and data integrity reasons Squid by default performs | |
1503 | sanity checks of the addresses of FTP data connections ensure the | |
1504 | data connection is to the requested server. If you need to allow | |
1505 | FTP connections to servers using another IP address for the data | |
7f7db318 | 1506 | connection turn this off. |
cccac0a2 | 1507 | DOC_END |
1508 | ||
1509 | NAME: check_hostnames | |
1510 | TYPE: onoff | |
1511 | DEFAULT: on | |
1512 | LOC: Config.onoff.check_hostnames | |
1513 | DOC_START | |
1514 | For security and stability reasons Squid by default checks | |
1515 | hostnames for Internet standard RFC compliance. If you do not want | |
7f7db318 | 1516 | Squid to perform these checks turn this directive off. |
cccac0a2 | 1517 | DOC_END |
1518 | ||
dad0fe12 | 1519 | NAME: ftp_telnet_protocol |
1520 | TYPE: onoff | |
1521 | DEFAULT: on | |
1522 | LOC: Config.Ftp.telnet | |
1523 | DOC_START | |
1524 | The FTP protocol is officially defined to use the telnet protocol | |
1525 | as transport channel for the control connection. However, many | |
5ac1a5b3 | 1526 | implementations are broken and does not respect this aspect of |
dad0fe12 | 1527 | the FTP protocol. |
1528 | ||
1529 | If you have trouble accessing files with ASCII code 255 in the | |
7f7db318 | 1530 | path or similar problems involving this ASCII code you can |
1531 | try setting this directive to off. If that helps, report to the | |
dad0fe12 | 1532 | operator of the FTP server in question that their FTP server |
1533 | is broken and does not follow the FTP standard. | |
1534 | DOC_END | |
1535 | ||
cccac0a2 | 1536 | NAME: cache_dns_program |
1537 | TYPE: string | |
1538 | IFDEF: USE_DNSSERVERS | |
1539 | DEFAULT: @DEFAULT_DNSSERVER@ | |
1540 | LOC: Config.Program.dnsserver | |
1541 | DOC_START | |
1542 | Specify the location of the executable for dnslookup process. | |
1543 | DOC_END | |
1544 | ||
1545 | NAME: dns_children | |
1546 | TYPE: int | |
1547 | IFDEF: USE_DNSSERVERS | |
1548 | DEFAULT: 5 | |
1549 | LOC: Config.dnsChildren | |
1550 | DOC_START | |
1551 | The number of processes spawn to service DNS name lookups. | |
1552 | For heavily loaded caches on large servers, you should | |
1553 | probably increase this value to at least 10. The maximum | |
1554 | is 32. The default is 5. | |
1555 | ||
1556 | You must have at least one dnsserver process. | |
1557 | DOC_END | |
1558 | ||
1559 | NAME: dns_retransmit_interval | |
1560 | TYPE: time_t | |
1561 | DEFAULT: 5 seconds | |
1562 | LOC: Config.Timeout.idns_retransmit | |
1563 | IFDEF: !USE_DNSSERVERS | |
1564 | DOC_START | |
1565 | Initial retransmit interval for DNS queries. The interval is | |
1566 | doubled each time all configured DNS servers have been tried. | |
1567 | ||
1568 | DOC_END | |
1569 | ||
1570 | NAME: dns_timeout | |
1571 | TYPE: time_t | |
1572 | DEFAULT: 5 minutes | |
1573 | LOC: Config.Timeout.idns_query | |
1574 | IFDEF: !USE_DNSSERVERS | |
1575 | DOC_START | |
1576 | DNS Query timeout. If no response is received to a DNS query | |
7f7db318 | 1577 | within this time all DNS servers for the queried domain |
1578 | are assumed to be unavailable. | |
cccac0a2 | 1579 | DOC_END |
1580 | ||
1581 | NAME: dns_defnames | |
1582 | COMMENT: on|off | |
cccac0a2 | 1583 | TYPE: onoff |
1584 | DEFAULT: off | |
1585 | LOC: Config.onoff.res_defnames | |
cccac0a2 | 1586 | DOC_START |
68836b58 | 1587 | Normally the RES_DEFNAMES resolver option is disabled |
1588 | (see res_init(3)). This prevents caches in a hierarchy | |
cccac0a2 | 1589 | from interpreting single-component hostnames locally. To allow |
68836b58 | 1590 | Squid to handle single-component names, enable this option. |
cccac0a2 | 1591 | DOC_END |
1592 | ||
1593 | NAME: dns_nameservers | |
1594 | TYPE: wordlist | |
1595 | DEFAULT: none | |
1596 | LOC: Config.dns_nameservers | |
1597 | DOC_START | |
1598 | Use this if you want to specify a list of DNS name servers | |
1599 | (IP addresses) to use instead of those given in your | |
1600 | /etc/resolv.conf file. | |
1601 | On Windows platforms, if no value is specified here or in | |
1602 | the /etc/resolv.conf file, the list of DNS name servers are | |
1603 | taken from the Windows registry, both static and dynamic DHCP | |
1604 | configurations are supported. | |
1605 | ||
1606 | Example: dns_nameservers 10.0.0.1 192.172.0.4 | |
1607 | DOC_END | |
1608 | ||
1609 | NAME: hosts_file | |
1610 | TYPE: string | |
1611 | DEFAULT: @DEFAULT_HOSTS@ | |
1612 | LOC: Config.etcHostsPath | |
1613 | DOC_START | |
1614 | Location of the host-local IP name-address associations | |
1615 | database. Most Operating Systems have such a file on different | |
7f7db318 | 1616 | default locations: |
cccac0a2 | 1617 | - Un*X & Linux: /etc/hosts |
1618 | - Windows NT/2000: %SystemRoot%\system32\drivers\etc\hosts | |
6845f129 | 1619 | (%SystemRoot% value install default is c:\winnt) |
fc4d8ed8 | 1620 | - Windows XP/2003: %SystemRoot%\system32\drivers\etc\hosts |
6845f129 | 1621 | (%SystemRoot% value install default is c:\windows) |
cccac0a2 | 1622 | - Windows 9x/Me: %windir%\hosts |
6845f129 | 1623 | (%windir% value is usually c:\windows) |
1624 | - Cygwin: /etc/hosts | |
cccac0a2 | 1625 | |
1626 | The file contains newline-separated definitions, in the | |
1627 | form ip_address_in_dotted_form name [name ...] names are | |
5ac1a5b3 | 1628 | whitespace-separated. Lines beginning with an hash (#) |
cccac0a2 | 1629 | character are comments. |
1630 | ||
7f7db318 | 1631 | The file is checked at startup and upon configuration. |
cccac0a2 | 1632 | If set to 'none', it won't be checked. |
7f7db318 | 1633 | If append_domain is used, that domain will be added to |
cccac0a2 | 1634 | domain-local (i.e. not containing any dot character) host |
1635 | definitions. | |
1636 | DOC_END | |
1637 | ||
1638 | NAME: diskd_program | |
1639 | TYPE: string | |
1640 | DEFAULT: @DEFAULT_DISKD@ | |
1641 | LOC: Config.Program.diskd | |
1642 | DOC_START | |
1643 | Specify the location of the diskd executable. | |
7f7db318 | 1644 | Note this is only useful if you have compiled in |
cccac0a2 | 1645 | diskd as one of the store io modules. |
1646 | DOC_END | |
1647 | ||
1648 | NAME: unlinkd_program | |
1649 | IFDEF: USE_UNLINKD | |
1650 | TYPE: string | |
1651 | DEFAULT: @DEFAULT_UNLINKD@ | |
1652 | LOC: Config.Program.unlinkd | |
1653 | DOC_START | |
1654 | Specify the location of the executable for file deletion process. | |
1655 | DOC_END | |
1656 | ||
1657 | NAME: pinger_program | |
1658 | TYPE: string | |
1659 | DEFAULT: @DEFAULT_PINGER@ | |
1660 | LOC: Config.Program.pinger | |
1661 | IFDEF: USE_ICMP | |
1662 | DOC_START | |
1663 | Specify the location of the executable for the pinger process. | |
1664 | DOC_END | |
1665 | ||
1666 | ||
346be6ad | 1667 | NAME: url_rewrite_program redirect_program |
cccac0a2 | 1668 | TYPE: wordlist |
1669 | LOC: Config.Program.redirect | |
1670 | DEFAULT: none | |
1671 | DOC_START | |
1672 | Specify the location of the executable for the URL redirector. | |
1673 | Since they can perform almost any function there isn't one included. | |
1674 | See the FAQ (section 15) for information on how to write one. | |
1675 | By default, a redirector is not used. | |
1676 | DOC_END | |
1677 | ||
1678 | ||
dc62e7f7 | 1679 | NAME: url_rewrite_children redirect_children |
cccac0a2 | 1680 | TYPE: int |
1681 | DEFAULT: 5 | |
1682 | LOC: Config.redirectChildren | |
1683 | DOC_START | |
1684 | The number of redirector processes to spawn. If you start | |
1685 | too few Squid will have to wait for them to process a backlog of | |
1686 | URLs, slowing it down. If you start too many they will use RAM | |
1687 | and other system resources. | |
1688 | DOC_END | |
1689 | ||
dc62e7f7 | 1690 | NAME: url_rewrite_concurrency redirect_concurrency |
cccac0a2 | 1691 | TYPE: int |
1692 | DEFAULT: 0 | |
1693 | LOC: Config.redirectConcurrency | |
1694 | DOC_START | |
1695 | The number of requests each redirector helper can handle in | |
7f7db318 | 1696 | parallell. Defaults to 0 which indicates the redirector |
cccac0a2 | 1697 | is a old-style singlethreaded redirector. |
1698 | DOC_END | |
1699 | ||
dc62e7f7 | 1700 | NAME: url_rewrite_host_header redirect_rewrites_host_header |
cccac0a2 | 1701 | TYPE: onoff |
1702 | DEFAULT: on | |
1703 | LOC: Config.onoff.redir_rewrites_host | |
1704 | DOC_START | |
1705 | By default Squid rewrites any Host: header in redirected | |
7f7db318 | 1706 | requests. If you are running an accelerator this may |
cccac0a2 | 1707 | not be a wanted effect of a redirector. |
1708 | ||
1709 | WARNING: Entries are cached on the result of the URL rewriting | |
1710 | process, so be careful if you have domain-virtual hosts. | |
1711 | DOC_END | |
1712 | ||
1713 | NAME: redirector_access | |
1714 | TYPE: acl_access | |
1715 | DEFAULT: none | |
1716 | LOC: Config.accessList.redirector | |
1717 | DOC_START | |
1718 | If defined, this access list specifies which requests are | |
1719 | sent to the redirector processes. By default all requests | |
1720 | are sent. | |
1721 | DOC_END | |
1722 | ||
1723 | NAME: auth_param | |
1724 | TYPE: authparam | |
1725 | LOC: Config.authConfiguration | |
1726 | DEFAULT: none | |
1727 | DOC_START | |
1728 | This is used to pass parameters to the various authentication | |
1729 | schemes. | |
1730 | format: auth_param scheme parameter [setting] | |
7f7db318 | 1731 | |
1732 | auth_param basic program @DEFAULT_PREFIX@/bin/ncsa_auth @DEFAULT_PREFIX@/etc/passwd | |
cccac0a2 | 1733 | would tell the basic authentication scheme it's program parameter. |
1734 | ||
7f7db318 | 1735 | The order authentication prompts are presented to the client_agent |
5ac1a5b3 | 1736 | is dependent on the order the scheme first appears in config file. |
cccac0a2 | 1737 | IE has a bug (it's not rfc 2617 compliant) in that it will use the basic |
1738 | scheme if basic is the first entry presented, even if more secure schemes | |
1739 | are presented. For now use the order in the file below. If other browsers | |
5ac1a5b3 | 1740 | have difficulties (don't recognize the schemes offered even if you are using |
7f7db318 | 1741 | basic) either put basic first, or disable the other schemes (by commenting |
cccac0a2 | 1742 | out their program entry). |
1743 | ||
1744 | Once an authentication scheme is fully configured, it can only be shutdown | |
1745 | by shutting squid down and restarting. Changes can be made on the fly and | |
1746 | activated with a reconfigure. I.E. You can change to a different helper, | |
1747 | but not unconfigure the helper completely. | |
1748 | ||
1749 | === Parameters for the basic scheme follow. === | |
7f7db318 | 1750 | |
cccac0a2 | 1751 | "program" cmdline |
1752 | Specify the command for the external authenticator. Such a | |
1753 | program reads a line containing "username password" and replies | |
0a0c70cd | 1754 | "ERR" in an endless loop. "ERR" responses may optionally be followed |
1755 | by a error description available as %m in the returned error page. | |
1756 | If you use an authenticator, make sure you have 1 acl of type proxy_auth. | |
1757 | By default, the basic authentication scheme is not used unless a program | |
1758 | is specified. | |
cccac0a2 | 1759 | |
1760 | If you want to use the traditional proxy authentication, | |
6845f129 | 1761 | jump over to the ../helpers/basic_auth/NCSA directory and |
cccac0a2 | 1762 | type: |
1763 | % make | |
1764 | % make install | |
1765 | ||
1766 | Then, set this line to something like | |
1767 | ||
6845f129 | 1768 | auth_param basic program @DEFAULT_PREFIX@/libexec/ncsa_auth @DEFAULT_PREFIX@/etc/passwd |
cccac0a2 | 1769 | |
1770 | "children" numberofchildren | |
1771 | The number of authenticator processes to spawn (no default). | |
1772 | If you start too few Squid will have to wait for them to | |
1773 | process a backlog of usercode/password verifications, slowing | |
1774 | it down. When password verifications are done via a (slow) | |
1775 | network you are likely to need lots of authenticator | |
1776 | processes. | |
1777 | auth_param basic children 5 | |
1778 | ||
1779 | "concurrency" concurrency | |
1780 | The number of concurrent requests the helper can process. | |
1781 | The default of 0 is used for helpers who only supports | |
1782 | one request at a time. | |
1783 | auth_param basic concurrency 0 | |
1784 | ||
1785 | "realm" realmstring | |
1786 | Specifies the realm name which is to be reported to the | |
1787 | client for the basic proxy authentication scheme (part of | |
1788 | the text the user will see when prompted their username and | |
1789 | password). There is no default. | |
1790 | auth_param basic realm Squid proxy-caching web server | |
1791 | ||
1792 | "credentialsttl" timetolive | |
1793 | Specifies how long squid assumes an externally validated | |
1794 | username:password pair is valid for - in other words how | |
1795 | often the helper program is called for that user. Set this | |
1796 | low to force revalidation with short lived passwords. Note | |
5ac1a5b3 | 1797 | setting this high does not impact your susceptibility |
cccac0a2 | 1798 | to replay attacks unless you are using an one-time password |
1799 | system (such as SecureID). If you are using such a system, | |
1800 | you will be vulnerable to replay attacks unless you also | |
1801 | use the max_user_ip ACL in an http_access rule. | |
1802 | ||
6845f129 | 1803 | "casesensitive" on|off |
1804 | Specifies if usernames are case sensitive. Most user databases are | |
1805 | case insensitive allowing the same username to be spelled using both | |
1806 | lower and upper case letters, but some are case sensitive. This | |
1807 | makes a big difference for user_max_ip ACL processing and similar. | |
1808 | auth_param basic casesensitive off | |
64658378 | 1809 | |
cccac0a2 | 1810 | === Parameters for the digest scheme follow === |
1811 | ||
1812 | "program" cmdline | |
1813 | Specify the command for the external authenticator. Such | |
1814 | a program reads a line containing "username":"realm" and | |
4c9fa5d5 | 1815 | replies with the appropriate H(A1) value base64 encoded or |
1816 | ERR if the user (or his H(A1) hash) does not exists. | |
1817 | See rfc 2616 for the definition of H(A1). | |
0a0c70cd | 1818 | "ERR" responses may optionally be followed by a error description |
1819 | available as %m in the returned error page. | |
4c9fa5d5 | 1820 | |
1821 | By default, the digest authentication is not used unless a | |
1822 | program is specified. | |
1823 | ||
1824 | If you want to use a digest authenticator, jump over to the | |
6845f129 | 1825 | helpers/digest_auth/ directory and choose the authenticator |
4c9fa5d5 | 1826 | to use. In it's directory type |
6845f129 | 1827 | % make |
1828 | % make install | |
cccac0a2 | 1829 | |
1830 | Then, set this line to something like | |
1831 | ||
1832 | auth_param digest program @DEFAULT_PREFIX@/bin/digest_auth_pw @DEFAULT_PREFIX@/etc/digpass | |
1833 | ||
1834 | ||
1835 | "children" numberofchildren | |
1836 | The number of authenticator processes to spawn (no default). | |
1837 | If you start too few Squid will have to wait for them to | |
1838 | process a backlog of H(A1) calculations, slowing it down. | |
1839 | When the H(A1) calculations are done via a (slow) network | |
1840 | you are likely to need lots of authenticator processes. | |
1841 | auth_param digest children 5 | |
1842 | ||
1843 | "realm" realmstring | |
1844 | Specifies the realm name which is to be reported to the | |
1845 | client for the digest proxy authentication scheme (part of | |
1846 | the text the user will see when prompted their username and | |
1847 | password). There is no default. | |
1848 | auth_param digest realm Squid proxy-caching web server | |
1849 | ||
1850 | "nonce_garbage_interval" timeinterval | |
1851 | Specifies the interval that nonces that have been issued | |
1852 | to client_agent's are checked for validity. | |
1853 | ||
1854 | "nonce_max_duration" timeinterval | |
1855 | Specifies the maximum length of time a given nonce will be | |
1856 | valid for. | |
1857 | ||
1858 | "nonce_max_count" number | |
1859 | Specifies the maximum number of times a given nonce can be | |
1860 | used. | |
1861 | ||
1862 | "nonce_strictness" on|off | |
5ac1a5b3 | 1863 | Determines if squid requires strict increment-by-1 behavior |
cccac0a2 | 1864 | for nonce counts, or just incrementing (off - for use when |
1865 | useragents generate nonce counts that occasionally miss 1 | |
1866 | (ie, 1,2,4,6)). Default off. | |
1867 | ||
1868 | "check_nonce_count" on|off | |
1869 | This directive if set to off can disable the nonce count check | |
1870 | completely to work around buggy digest qop implementations in | |
1871 | certain mainstream browser versions. Default on to check the | |
1872 | nonce count to protect from authentication replay attacks. | |
1873 | ||
1874 | "post_workaround" on|off | |
1875 | This is a workaround to certain buggy browsers who sends | |
1876 | an incorrect request digest in POST requests when reusing | |
5ac1a5b3 | 1877 | the same nonce as acquired earlier on a GET request. |
cccac0a2 | 1878 | |
cccac0a2 | 1879 | === NTLM scheme options follow === |
1880 | ||
1881 | "program" cmdline | |
5ac1a5b3 | 1882 | Specify the command for the external NTLM authenticator. |
bdf7e1b4 | 1883 | Such a program reads exchanged NTLMSSP packets with |
1884 | the browser via Squid until authentication is completed. | |
5ac1a5b3 | 1885 | If you use an NTLM authenticator, make sure you have 1 acl |
1886 | of type proxy_auth. By default, the NTLM authenticator_program | |
cccac0a2 | 1887 | is not used. |
1888 | ||
1889 | auth_param ntlm program @DEFAULT_PREFIX@/bin/ntlm_auth | |
1890 | ||
1891 | "children" numberofchildren | |
1892 | The number of authenticator processes to spawn (no default). | |
1893 | If you start too few Squid will have to wait for them to | |
1894 | process a backlog of credential verifications, slowing it | |
5ac1a5b3 | 1895 | down. When credential verifications are done via a (slow) |
cccac0a2 | 1896 | network you are likely to need lots of authenticator |
1897 | processes. | |
dd9b1776 | 1898 | |
cccac0a2 | 1899 | auth_param ntlm children 5 |
1900 | ||
dd9b1776 | 1901 | "keep_alive" on|off |
1902 | If you experience problems with PUT/POST requests when using the | |
1903 | Negotiate authentication scheme then you can try setting this to | |
1904 | off. This will cause Squid to forcibly close the connection on | |
1905 | the initial requests where the browser asks which schemes are | |
1906 | supported by the proxy. | |
1907 | ||
1908 | auth_param ntlm keep_alive on | |
1909 | ||
6bf4f823 | 1910 | === Options for configuring the NEGOTIATE auth-scheme follow === |
cccac0a2 | 1911 | |
6bf4f823 | 1912 | "program" cmdline |
1913 | Specify the command for the external Negotiate authenticator. | |
1914 | This protocol is used in Microsoft Active-Directory enabled setups with | |
1915 | the Microsoft Internet Explorer or Mozilla Firefox browsers. | |
1916 | Its main purpose is to exchange credentials with the Squid proxy | |
1917 | using the Kerberos mechanisms. | |
1918 | If you use a Negotiate authenticator, make sure you have at least one acl | |
1919 | of type proxy_auth active. By default, the negotiate authenticator_program | |
1920 | is not used. | |
1921 | The only supported program for this role is the ntlm_auth | |
26819f1e | 1922 | program distributed as part of Samba, version 4 or later. |
6bf4f823 | 1923 | |
1924 | auth_param negotiate program @DEFAULT_PREFIX@/bin/ntlm_auth --helper-protocol=gss-spnego | |
1925 | ||
1926 | "children" numberofchildren | |
1927 | The number of authenticator processes to spawn (no default). | |
1928 | If you start too few Squid will have to wait for them to | |
1929 | process a backlog of credential verifications, slowing it | |
1930 | down. When crendential verifications are done via a (slow) | |
1931 | network you are likely to need lots of authenticator | |
1932 | processes. | |
1933 | auth_param negotiate children 5 | |
1934 | ||
1935 | "keep_alive" on|off | |
1936 | If you experience problems with PUT/POST requests when using the | |
1937 | Negotiate authentication scheme then you can try setting this to | |
1938 | off. This will cause Squid to forcibly close the connection on | |
1939 | the initial requests where the browser asks which schemes are | |
1940 | supported by the proxy. | |
1941 | ||
1942 | auth_param negotiate keep_alive on | |
cccac0a2 | 1943 | |
1944 | NOCOMMENT_START | |
6845f129 | 1945 | #Recommended minimum configuration per scheme: |
6bf4f823 | 1946 | #auth_param negotiate program <uncomment and complete this line to activate> |
1947 | #auth_param negotiate children 5 | |
1948 | #auth_param negotiate keep_alive on | |
26819f1e | 1949 | #auth_param ntlm program <uncomment and complete this line to activate> |
1950 | #auth_param ntlm children 5 | |
1951 | #auth_param ntlm keep_alive on | |
2d70df72 | 1952 | #auth_param digest program <uncomment and complete this line> |
1953 | #auth_param digest children 5 | |
1954 | #auth_param digest realm Squid proxy-caching web server | |
1955 | #auth_param digest nonce_garbage_interval 5 minutes | |
1956 | #auth_param digest nonce_max_duration 30 minutes | |
1957 | #auth_param digest nonce_max_count 50 | |
94439e4e | 1958 | #auth_param basic program <uncomment and complete this line> |
6845f129 | 1959 | #auth_param basic children 5 |
1960 | #auth_param basic realm Squid proxy-caching web server | |
1961 | #auth_param basic credentialsttl 2 hours | |
6b698a21 | 1962 | NOCOMMENT_END |
1963 | DOC_END | |
0976f8db | 1964 | |
6b698a21 | 1965 | NAME: authenticate_cache_garbage_interval |
1966 | TYPE: time_t | |
1967 | DEFAULT: 1 hour | |
1968 | LOC: Config.authenticateGCInterval | |
1969 | DOC_START | |
1970 | The time period between garbage collection across the | |
5ac1a5b3 | 1971 | username cache. This is a tradeoff between memory utilization |
6b698a21 | 1972 | (long intervals - say 2 days) and CPU (short intervals - |
1973 | say 1 minute). Only change if you have good reason to. | |
1974 | DOC_END | |
0976f8db | 1975 | |
6b698a21 | 1976 | NAME: authenticate_ttl |
1977 | TYPE: time_t | |
1978 | DEFAULT: 1 hour | |
1979 | LOC: Config.authenticateTTL | |
1980 | DOC_START | |
1981 | The time a user & their credentials stay in the logged in | |
1982 | user cache since their last request. When the garbage | |
1983 | interval passes, all user credentials that have passed their | |
1984 | TTL are removed from memory. | |
1985 | DOC_END | |
0976f8db | 1986 | |
6b698a21 | 1987 | NAME: authenticate_ip_ttl |
1988 | TYPE: time_t | |
1989 | LOC: Config.authenticateIpTTL | |
1990 | DEFAULT: 0 seconds | |
1991 | DOC_START | |
1992 | If you use proxy authentication and the 'max_user_ip' ACL, | |
1993 | this directive controls how long Squid remembers the IP | |
1994 | addresses associated with each user. Use a small value | |
1995 | (e.g., 60 seconds) if your users might change addresses | |
1996 | quickly, as is the case with dialups. You might be safe | |
1997 | using a larger value (e.g., 2 hours) in a corporate LAN | |
1998 | environment with relatively static address assignments. | |
1999 | DOC_END | |
0976f8db | 2000 | |
6b698a21 | 2001 | NAME: external_acl_type |
2002 | TYPE: externalAclHelper | |
2003 | LOC: Config.externalAclHelperList | |
2004 | DEFAULT: none | |
2005 | DOC_START | |
2006 | This option defines external acl classes using a helper program | |
2007 | to look up the status | |
7f7db318 | 2008 | |
6b698a21 | 2009 | external_acl_type name [options] FORMAT.. /path/to/helper [helper arguments..] |
7f7db318 | 2010 | |
6b698a21 | 2011 | Options: |
0976f8db | 2012 | |
6b698a21 | 2013 | ttl=n TTL in seconds for cached results (defaults to 3600 |
2014 | for 1 hour) | |
2015 | negative_ttl=n | |
2016 | TTL for cached negative lookups (default same | |
2017 | as ttl) | |
2018 | children=n Number of acl helper processes spawn to service | |
2019 | external acl lookups of this type. | |
2020 | concurrency=n concurrency level per process. Use 0 for old style | |
2021 | helpers who can only process a single request at a | |
2022 | time. | |
2023 | cache=n result cache size, 0 is unbounded (default) | |
2024 | grace=n Percentage remaining of TTL where a refresh of a | |
2025 | cached entry should be initiated without needing to | |
2026 | wait for a new reply. (default 0 for no grace period) | |
dc1af3cf | 2027 | protocol=2.5 Compatibility mode for Squid-2.5 external acl helpers |
7f7db318 | 2028 | |
6b698a21 | 2029 | FORMAT specifications |
2030 | ||
2031 | %LOGIN Authenticated user login name | |
66b4345b | 2032 | %EXT_USER Username from external acl |
6b698a21 | 2033 | %IDENT Ident user name |
2034 | %SRC Client IP | |
2035 | %SRCPORT Client source port | |
2036 | %DST Requested host | |
2037 | %PROTO Requested protocol | |
2038 | %PORT Requested port | |
2039 | %PATH Requested URL path | |
2040 | %METHOD Request method | |
2041 | %MYADDR Squid interface address | |
2042 | %MYPORT Squid http_port number | |
4ac9968f | 2043 | %USER_CERT SSL User certificate in PEM format |
3d61c476 | 2044 | %USER_CERTCHAIN SSL User certificate chain in PEM format |
4ac9968f | 2045 | %USER_CERT_xx SSL User certificate subject attribute xx |
2046 | %USER_CA_xx SSL User certificate issuer attribute xx | |
6b698a21 | 2047 | %{Header} HTTP request header |
2048 | %{Hdr:member} HTTP request header list member | |
2049 | %{Hdr:;member} | |
2050 | HTTP request header list member using ; as | |
2051 | list separator. ; can be any non-alphanumeric | |
2052 | character. | |
2053 | ||
2054 | In addition, any string specified in the referencing acl will | |
2055 | also be included in the helper request line, after the specified | |
2056 | formats (see the "acl external" directive) | |
2057 | ||
2058 | The helper receives lines per the above format specification, | |
2059 | and returns lines starting with OK or ERR indicating the validity | |
2060 | of the request and optionally followed by additional keywords with | |
dc1af3cf | 2061 | more details. To protect from odd characters the data is URL |
2062 | escaped. | |
6b698a21 | 2063 | |
2064 | General result syntax: | |
7f7db318 | 2065 | |
6b698a21 | 2066 | OK/ERR keyword=value ... |
0976f8db | 2067 | |
6b698a21 | 2068 | Defined keywords: |
0976f8db | 2069 | |
6b698a21 | 2070 | user= The users name (login) |
2071 | password= The users password (for login= cache_peer option) | |
2072 | message= Message describing the reason. Available as %o | |
2073 | in error pages | |
2074 | tag= Apply a tag to a request (for both ERR and OK results) | |
2075 | Only sets a tag, does not alter existing tags. | |
2076 | log= String to be logged in access.log. Available as | |
2077 | %ea in logformat specifications | |
0976f8db | 2078 | |
dc1af3cf | 2079 | Keyword values need to be URL escaped if they may contain |
2080 | contain whitespace or quotes. | |
2081 | ||
2082 | In Squid-2.5 compatibility mode quoting using " and \ is used | |
2083 | instead of URL escaping. | |
6b698a21 | 2084 | DOC_END |
0976f8db | 2085 | |
6b698a21 | 2086 | COMMENT_START |
2087 | OPTIONS FOR TUNING THE CACHE | |
2088 | ----------------------------------------------------------------------------- | |
2089 | COMMENT_END | |
0976f8db | 2090 | |
6b698a21 | 2091 | NAME: wais_relay_host |
2092 | TYPE: string | |
2093 | DEFAULT: none | |
2094 | LOC: Config.Wais.relayHost | |
2095 | DOC_NONE | |
0976f8db | 2096 | |
6b698a21 | 2097 | NAME: wais_relay_port |
2098 | TYPE: ushort | |
2099 | DEFAULT: 0 | |
2100 | LOC: Config.Wais.relayPort | |
2101 | DOC_START | |
2102 | Relay WAIS request to host (1st arg) at port (2 arg). | |
2103 | DOC_END | |
0976f8db | 2104 | |
0976f8db | 2105 | |
6b698a21 | 2106 | NAME: request_header_max_size |
2107 | COMMENT: (KB) | |
2108 | TYPE: b_size_t | |
5b648f60 | 2109 | DEFAULT: 20 KB |
6b698a21 | 2110 | LOC: Config.maxRequestHeaderSize |
2111 | DOC_START | |
2112 | This specifies the maximum size for HTTP headers in a request. | |
2113 | Request headers are usually relatively small (about 512 bytes). | |
2114 | Placing a limit on the request header size will catch certain | |
2115 | bugs (for example with persistent connections) and possibly | |
2116 | buffer-overflow or denial-of-service attacks. | |
2117 | DOC_END | |
0976f8db | 2118 | |
6b698a21 | 2119 | NAME: request_body_max_size |
2120 | COMMENT: (KB) | |
2121 | TYPE: b_size_t | |
2122 | DEFAULT: 0 KB | |
2123 | LOC: Config.maxRequestBodySize | |
2124 | DOC_START | |
2125 | This specifies the maximum size for an HTTP request body. | |
2126 | In other words, the maximum size of a PUT/POST request. | |
2127 | A user who attempts to send a request with a body larger | |
2128 | than this limit receives an "Invalid Request" error message. | |
2129 | If you set this parameter to a zero (the default), there will | |
2130 | be no limit imposed. | |
2131 | DOC_END | |
0976f8db | 2132 | |
6b698a21 | 2133 | NAME: refresh_pattern |
2134 | TYPE: refreshpattern | |
2135 | LOC: Config.Refresh | |
2136 | DEFAULT: none | |
2137 | DOC_START | |
2138 | usage: refresh_pattern [-i] regex min percent max [options] | |
0976f8db | 2139 | |
6b698a21 | 2140 | By default, regular expressions are CASE-SENSITIVE. To make |
2141 | them case-insensitive, use the -i option. | |
0976f8db | 2142 | |
6b698a21 | 2143 | 'Min' is the time (in minutes) an object without an explicit |
2144 | expiry time should be considered fresh. The recommended | |
2145 | value is 0, any higher values may cause dynamic applications | |
2146 | to be erroneously cached unless the application designer | |
2147 | has taken the appropriate actions. | |
0976f8db | 2148 | |
6b698a21 | 2149 | 'Percent' is a percentage of the objects age (time since last |
2150 | modification age) an object without explicit expiry time | |
2151 | will be considered fresh. | |
0976f8db | 2152 | |
6b698a21 | 2153 | 'Max' is an upper limit on how long objects without an explicit |
2154 | expiry time will be considered fresh. | |
0976f8db | 2155 | |
6b698a21 | 2156 | options: override-expire |
2157 | override-lastmod | |
2158 | reload-into-ims | |
2159 | ignore-reload | |
38f9c547 | 2160 | ignore-no-cache |
2161 | ignore-no-store | |
2162 | ignore-private | |
2163 | ignore-auth | |
6845f129 | 2164 | refresh-ims |
0976f8db | 2165 | |
6b698a21 | 2166 | override-expire enforces min age even if the server |
2167 | sent a Expires: header. Doing this VIOLATES the HTTP | |
2168 | standard. Enabling this feature could make you liable | |
2169 | for problems which it causes. | |
0976f8db | 2170 | |
6b698a21 | 2171 | override-lastmod enforces min age even on objects |
7f7db318 | 2172 | that were modified recently. |
0976f8db | 2173 | |
6b698a21 | 2174 | reload-into-ims changes client no-cache or ``reload'' |
2175 | to If-Modified-Since requests. Doing this VIOLATES the | |
2176 | HTTP standard. Enabling this feature could make you | |
2177 | liable for problems which it causes. | |
0976f8db | 2178 | |
6b698a21 | 2179 | ignore-reload ignores a client no-cache or ``reload'' |
2180 | header. Doing this VIOLATES the HTTP standard. Enabling | |
2181 | this feature could make you liable for problems which | |
2182 | it causes. | |
7f7db318 | 2183 | |
6845f129 | 2184 | ignore-no-cache ignores any ``Pragma: no-cache'' and |
2185 | ``Cache-control: no-cache'' headers received from a server. | |
2186 | The HTTP RFC never allows the use of this (Pragma) header | |
2187 | from a server, only a client, though plenty of servers | |
2188 | send it anyway. | |
38f9c547 | 2189 | |
6845f129 | 2190 | ignore-no-store ignores any ``Cache-control: no-store'' |
2191 | headers received from a server. Doing this VIOLATES | |
2192 | the HTTP standard. Enabling this feature could make you | |
2193 | liable for problems which it causes. | |
38f9c547 | 2194 | |
6845f129 | 2195 | ignore-private ignores any ``Cache-control: private'' |
2196 | headers received from a server. Doing this VIOLATES | |
2197 | the HTTP standard. Enabling this feature could make you | |
2198 | liable for problems which it causes. | |
38f9c547 | 2199 | |
6845f129 | 2200 | ignore-auth caches responses to requests with authorization, |
2201 | irrespective of ``Cache-control'' headers received from | |
2202 | a server. Doing this VIOLATES the HTTP standard. Enabling | |
2203 | this feature could make you liable for problems which | |
2204 | it causes. | |
38f9c547 | 2205 | |
4c3ef9b2 | 2206 | refresh-ims causes squid to contact the origin server |
2207 | when a client issues an If-Modified-Since request. This | |
2208 | ensures that the client will receive an updated version | |
2209 | if one is available. | |
2210 | ||
6b698a21 | 2211 | Basically a cached object is: |
0976f8db | 2212 | |
6b698a21 | 2213 | FRESH if expires < now, else STALE |
2214 | STALE if age > max | |
2215 | FRESH if lm-factor < percent, else STALE | |
2216 | FRESH if age < min | |
2217 | else STALE | |
0976f8db | 2218 | |
6b698a21 | 2219 | The refresh_pattern lines are checked in the order listed here. |
2220 | The first entry which matches is used. If none of the entries | |
7f7db318 | 2221 | match the default will be used. |
0976f8db | 2222 | |
6b698a21 | 2223 | Note, you must uncomment all the default lines if you want |
2224 | to change one. The default setting is only active if none is | |
2225 | used. | |
0976f8db | 2226 | |
6b698a21 | 2227 | Suggested default: |
2228 | NOCOMMENT_START | |
2229 | refresh_pattern ^ftp: 1440 20% 10080 | |
2230 | refresh_pattern ^gopher: 1440 0% 1440 | |
2231 | refresh_pattern . 0 20% 4320 | |
2232 | NOCOMMENT_END | |
2233 | DOC_END | |
0976f8db | 2234 | |
6b698a21 | 2235 | NAME: quick_abort_min |
2236 | COMMENT: (KB) | |
2237 | TYPE: kb_size_t | |
2238 | DEFAULT: 16 KB | |
2239 | LOC: Config.quickAbort.min | |
2240 | DOC_NONE | |
0976f8db | 2241 | |
6b698a21 | 2242 | NAME: quick_abort_max |
2243 | COMMENT: (KB) | |
2244 | TYPE: kb_size_t | |
2245 | DEFAULT: 16 KB | |
2246 | LOC: Config.quickAbort.max | |
2247 | DOC_NONE | |
0976f8db | 2248 | |
6b698a21 | 2249 | NAME: quick_abort_pct |
2250 | COMMENT: (percent) | |
2251 | TYPE: int | |
2252 | DEFAULT: 95 | |
2253 | LOC: Config.quickAbort.pct | |
2254 | DOC_START | |
2255 | The cache by default continues downloading aborted requests | |
2256 | which are almost completed (less than 16 KB remaining). This | |
2257 | may be undesirable on slow (e.g. SLIP) links and/or very busy | |
2258 | caches. Impatient users may tie up file descriptors and | |
2259 | bandwidth by repeatedly requesting and immediately aborting | |
2260 | downloads. | |
0976f8db | 2261 | |
6b698a21 | 2262 | When the user aborts a request, Squid will check the |
2263 | quick_abort values to the amount of data transfered until | |
2264 | then. | |
0976f8db | 2265 | |
6b698a21 | 2266 | If the transfer has less than 'quick_abort_min' KB remaining, |
2267 | it will finish the retrieval. | |
0976f8db | 2268 | |
6b698a21 | 2269 | If the transfer has more than 'quick_abort_max' KB remaining, |
2270 | it will abort the retrieval. | |
0976f8db | 2271 | |
6b698a21 | 2272 | If more than 'quick_abort_pct' of the transfer has completed, |
2273 | it will finish the retrieval. | |
0976f8db | 2274 | |
6b698a21 | 2275 | If you do not want any retrieval to continue after the client |
2276 | has aborted, set both 'quick_abort_min' and 'quick_abort_max' | |
2277 | to '0 KB'. | |
0976f8db | 2278 | |
6b698a21 | 2279 | If you want retrievals to always continue if they are being |
7f7db318 | 2280 | cached set 'quick_abort_min' to '-1 KB'. |
6b698a21 | 2281 | DOC_END |
0976f8db | 2282 | |
6b698a21 | 2283 | NAME: read_ahead_gap |
2284 | COMMENT: buffer-size | |
2285 | TYPE: kb_size_t | |
2286 | LOC: Config.readAheadGap | |
2287 | DEFAULT: 16 KB | |
2288 | DOC_START | |
2289 | The amount of data the cache will buffer ahead of what has been | |
2290 | sent to the client when retrieving an object from another server. | |
2291 | DOC_END | |
0976f8db | 2292 | |
6b698a21 | 2293 | NAME: negative_ttl |
2294 | COMMENT: time-units | |
2295 | TYPE: time_t | |
2296 | LOC: Config.negativeTtl | |
2297 | DEFAULT: 5 minutes | |
2298 | DOC_START | |
2299 | Time-to-Live (TTL) for failed requests. Certain types of | |
2300 | failures (such as "connection refused" and "404 Not Found") are | |
2301 | negatively-cached for a configurable amount of time. The | |
2302 | default is 5 minutes. Note that this is different from | |
2303 | negative caching of DNS lookups. | |
2304 | DOC_END | |
0976f8db | 2305 | |
0976f8db | 2306 | |
6b698a21 | 2307 | NAME: positive_dns_ttl |
2308 | COMMENT: time-units | |
2309 | TYPE: time_t | |
2310 | LOC: Config.positiveDnsTtl | |
2311 | DEFAULT: 6 hours | |
2312 | DOC_START | |
2313 | Time-to-Live (TTL) for positive caching of successful DNS lookups. | |
2314 | Default is 6 hours (360 minutes). If you want to minimize the | |
2315 | use of Squid's ipcache, set this to 1, not 0. | |
2316 | DOC_END | |
0976f8db | 2317 | |
0976f8db | 2318 | |
6b698a21 | 2319 | NAME: negative_dns_ttl |
2320 | COMMENT: time-units | |
2321 | TYPE: time_t | |
2322 | LOC: Config.negativeDnsTtl | |
2323 | DEFAULT: 5 minutes | |
2324 | DOC_START | |
2325 | Time-to-Live (TTL) for negative caching of failed DNS lookups. | |
2326 | DOC_END | |
0976f8db | 2327 | |
6b698a21 | 2328 | NAME: range_offset_limit |
2329 | COMMENT: (bytes) | |
2330 | TYPE: b_size_t | |
2331 | LOC: Config.rangeOffsetLimit | |
2332 | DEFAULT: 0 KB | |
2333 | DOC_START | |
2334 | Sets a upper limit on how far into the the file a Range request | |
2335 | may be to cause Squid to prefetch the whole file. If beyond this | |
7f7db318 | 2336 | limit Squid forwards the Range request as it is and the result |
6b698a21 | 2337 | is NOT cached. |
0976f8db | 2338 | |
6b698a21 | 2339 | This is to stop a far ahead range request (lets say start at 17MB) |
2340 | from making Squid fetch the whole object up to that point before | |
2341 | sending anything to the client. | |
0976f8db | 2342 | |
6b698a21 | 2343 | A value of -1 causes Squid to always fetch the object from the |
7f7db318 | 2344 | beginning so it may cache the result. (2.0 style) |
0976f8db | 2345 | |
6b698a21 | 2346 | A value of 0 causes Squid to never fetch more than the |
2347 | client requested. (default) | |
2348 | DOC_END | |
0976f8db | 2349 | |
0976f8db | 2350 | |
6b698a21 | 2351 | COMMENT_START |
2352 | TIMEOUTS | |
2353 | ----------------------------------------------------------------------------- | |
2354 | COMMENT_END | |
0976f8db | 2355 | |
777831e0 | 2356 | NAME: forward_timeout |
2357 | COMMENT: time-units | |
2358 | TYPE: time_t | |
2359 | LOC: Config.Timeout.forward | |
2360 | DEFAULT: 4 minutes | |
2361 | DOC_START | |
6845f129 | 2362 | This parameter specifies how long Squid should at most attempt in |
2363 | finding a forwarding path for the request before giving up. | |
777831e0 | 2364 | DOC_END |
2365 | ||
6b698a21 | 2366 | NAME: connect_timeout |
2367 | COMMENT: time-units | |
2368 | TYPE: time_t | |
2369 | LOC: Config.Timeout.connect | |
777831e0 | 2370 | DEFAULT: 1 minute |
6b698a21 | 2371 | DOC_START |
6845f129 | 2372 | This parameter specifies how long to wait for the TCP connect to |
2373 | the requested server or peer to complete before Squid should | |
2374 | attempt to find another path where to forward the request. | |
6b698a21 | 2375 | DOC_END |
0976f8db | 2376 | |
6b698a21 | 2377 | NAME: peer_connect_timeout |
2378 | COMMENT: time-units | |
2379 | TYPE: time_t | |
2380 | LOC: Config.Timeout.peer_connect | |
2381 | DEFAULT: 30 seconds | |
2382 | DOC_START | |
2383 | This parameter specifies how long to wait for a pending TCP | |
2384 | connection to a peer cache. The default is 30 seconds. You | |
2385 | may also set different timeout values for individual neighbors | |
2386 | with the 'connect-timeout' option on a 'cache_peer' line. | |
2387 | DOC_END | |
0976f8db | 2388 | |
6b698a21 | 2389 | NAME: read_timeout |
2390 | COMMENT: time-units | |
2391 | TYPE: time_t | |
2392 | LOC: Config.Timeout.read | |
2393 | DEFAULT: 15 minutes | |
2394 | DOC_START | |
2395 | The read_timeout is applied on server-side connections. After | |
2396 | each successful read(), the timeout will be extended by this | |
2397 | amount. If no data is read again after this amount of time, | |
2398 | the request is aborted and logged with ERR_READ_TIMEOUT. The | |
2399 | default is 15 minutes. | |
2400 | DOC_END | |
0976f8db | 2401 | |
0976f8db | 2402 | |
6b698a21 | 2403 | NAME: request_timeout |
2404 | TYPE: time_t | |
2405 | LOC: Config.Timeout.request | |
2406 | DEFAULT: 5 minutes | |
2407 | DOC_START | |
2408 | How long to wait for an HTTP request after initial | |
2409 | connection establishment. | |
2410 | DOC_END | |
0976f8db | 2411 | |
0976f8db | 2412 | |
6b698a21 | 2413 | NAME: persistent_request_timeout |
2414 | TYPE: time_t | |
2415 | LOC: Config.Timeout.persistent_request | |
2416 | DEFAULT: 1 minute | |
2417 | DOC_START | |
2418 | How long to wait for the next HTTP request on a persistent | |
2419 | connection after the previous request completes. | |
2420 | DOC_END | |
0976f8db | 2421 | |
0976f8db | 2422 | |
6b698a21 | 2423 | NAME: client_lifetime |
2424 | COMMENT: time-units | |
2425 | TYPE: time_t | |
2426 | LOC: Config.Timeout.lifetime | |
2427 | DEFAULT: 1 day | |
2428 | DOC_START | |
7f7db318 | 2429 | The maximum amount of time a client (browser) is allowed to |
6b698a21 | 2430 | remain connected to the cache process. This protects the Cache |
2431 | from having a lot of sockets (and hence file descriptors) tied up | |
2432 | in a CLOSE_WAIT state from remote clients that go away without | |
2433 | properly shutting down (either because of a network failure or | |
2434 | because of a poor client implementation). The default is one | |
2435 | day, 1440 minutes. | |
2436 | ||
2437 | NOTE: The default value is intended to be much larger than any | |
2438 | client would ever need to be connected to your cache. You | |
2439 | should probably change client_lifetime only as a last resort. | |
2440 | If you seem to have many client connections tying up | |
2441 | filedescriptors, we recommend first tuning the read_timeout, | |
2442 | request_timeout, persistent_request_timeout and quick_abort values. | |
2443 | DOC_END | |
2444 | ||
2445 | NAME: half_closed_clients | |
2446 | TYPE: onoff | |
2447 | LOC: Config.onoff.half_closed_clients | |
2448 | DEFAULT: on | |
2449 | DOC_START | |
2450 | Some clients may shutdown the sending side of their TCP | |
2451 | connections, while leaving their receiving sides open. Sometimes, | |
2452 | Squid can not tell the difference between a half-closed and a | |
2453 | fully-closed TCP connection. By default, half-closed client | |
2454 | connections are kept open until a read(2) or write(2) on the | |
2455 | socket returns an error. Change this option to 'off' and Squid | |
2456 | will immediately close client connections when read(2) returns | |
2457 | "no more data to read." | |
2458 | DOC_END | |
0976f8db | 2459 | |
6b698a21 | 2460 | NAME: pconn_timeout |
2461 | TYPE: time_t | |
2462 | LOC: Config.Timeout.pconn | |
2463 | DEFAULT: 120 seconds | |
2464 | DOC_START | |
2465 | Timeout for idle persistent connections to servers and other | |
2466 | proxies. | |
2467 | DOC_END | |
0976f8db | 2468 | |
6b698a21 | 2469 | NAME: ident_timeout |
2470 | TYPE: time_t | |
2471 | IFDEF: USE_IDENT | |
2472 | LOC: Config.Timeout.ident | |
2473 | DEFAULT: 10 seconds | |
2474 | DOC_START | |
2475 | Maximum time to wait for IDENT lookups to complete. | |
7f7db318 | 2476 | |
6b698a21 | 2477 | If this is too high, and you enabled IDENT lookups from untrusted |
7f7db318 | 2478 | users, you might be susceptible to denial-of-service by having |
6b698a21 | 2479 | many ident requests going at once. |
2480 | DOC_END | |
0976f8db | 2481 | |
0976f8db | 2482 | |
6b698a21 | 2483 | NAME: shutdown_lifetime |
2484 | COMMENT: time-units | |
2485 | TYPE: time_t | |
2486 | LOC: Config.shutdownLifetime | |
2487 | DEFAULT: 30 seconds | |
2488 | DOC_START | |
2489 | When SIGTERM or SIGHUP is received, the cache is put into | |
2490 | "shutdown pending" mode until all active sockets are closed. | |
2491 | This value is the lifetime to set for all open descriptors | |
2492 | during shutdown mode. Any active clients after this many | |
2493 | seconds will receive a 'timeout' message. | |
2494 | DOC_END | |
9e7dbc51 | 2495 | |
6b698a21 | 2496 | COMMENT_START |
2497 | ACCESS CONTROLS | |
2498 | ----------------------------------------------------------------------------- | |
2499 | COMMENT_END | |
9e7dbc51 | 2500 | |
6b698a21 | 2501 | NAME: acl |
2502 | TYPE: acl | |
2503 | LOC: Config.aclList | |
2504 | DEFAULT: none | |
2505 | DOC_START | |
2506 | Defining an Access List | |
9e7dbc51 | 2507 | |
6b698a21 | 2508 | acl aclname acltype string1 ... |
2509 | acl aclname acltype "file" ... | |
9e7dbc51 | 2510 | |
6b698a21 | 2511 | when using "file", the file should contain one item per line |
9e7dbc51 | 2512 | |
6b698a21 | 2513 | acltype is one of the types described below |
9e7dbc51 | 2514 | |
6b698a21 | 2515 | By default, regular expressions are CASE-SENSITIVE. To make |
2516 | them case-insensitive, use the -i option. | |
9e7dbc51 | 2517 | |
6b698a21 | 2518 | acl aclname src ip-address/netmask ... (clients IP address) |
2519 | acl aclname src addr1-addr2/netmask ... (range of addresses) | |
2520 | acl aclname dst ip-address/netmask ... (URL host's IP address) | |
2521 | acl aclname myip ip-address/netmask ... (local socket IP address) | |
9e7dbc51 | 2522 | |
5b807763 | 2523 | acl aclname arp mac-address ... (xx:xx:xx:xx:xx:xx notation) |
2524 | # The arp ACL requires the special configure option --enable-arp-acl. | |
2525 | # Furthermore, the ARP ACL code is not portable to all operating systems. | |
5cb988c7 | 2526 | # It works on Linux, Solaris, Windows, FreeBSD, and some other *BSD variants. |
5b807763 | 2527 | # |
2528 | # NOTE: Squid can only determine the MAC address for clients that are on | |
2529 | # the same subnet. If the client is on a different subnet, then Squid cannot | |
2530 | # find out its MAC address. | |
2531 | ||
6b698a21 | 2532 | acl aclname srcdomain .foo.com ... # reverse lookup, client IP |
2533 | acl aclname dstdomain .foo.com ... # Destination server from URL | |
2534 | acl aclname srcdom_regex [-i] xxx ... # regex matching client name | |
2535 | acl aclname dstdom_regex [-i] xxx ... # regex matching server | |
7660b45d | 2536 | # For dstdomain and dstdom_regex a reverse lookup is tried if a IP |
2537 | # based URL is used and no match is found. The name "none" is used | |
2538 | # if the reverse lookup fails. | |
9e7dbc51 | 2539 | |
a0ec9f68 | 2540 | acl aclname http_status 200 301 500- 400-403 ... # status code in reply |
2541 | ||
6b698a21 | 2542 | acl aclname time [day-abbrevs] [h1:m1-h2:m2] |
2543 | day-abbrevs: | |
2544 | S - Sunday | |
2545 | M - Monday | |
2546 | T - Tuesday | |
2547 | W - Wednesday | |
2548 | H - Thursday | |
2549 | F - Friday | |
2550 | A - Saturday | |
2551 | h1:m1 must be less than h2:m2 | |
2552 | acl aclname url_regex [-i] ^http:// ... # regex matching on whole URL | |
2553 | acl aclname urlpath_regex [-i] \.gif$ ... # regex matching on URL path | |
2554 | acl aclname port 80 70 21 ... | |
2555 | acl aclname port 0-1024 ... # ranges allowed | |
2556 | acl aclname myport 3128 ... # (local socket TCP port) | |
2557 | acl aclname proto HTTP FTP ... | |
2558 | acl aclname method GET POST ... | |
2559 | acl aclname browser [-i] regexp ... | |
00634927 | 2560 | # pattern match on User-Agent header (see also req_header below) |
6845f129 | 2561 | acl aclname referer_regex [-i] regexp ... |
2562 | # pattern match on Referer header | |
2563 | # Referer is highly unreliable, so use with care | |
6b698a21 | 2564 | acl aclname ident username ... |
2565 | acl aclname ident_regex [-i] pattern ... | |
2566 | # string match on ident output. | |
9e7dbc51 | 2567 | # use REQUIRED to accept any non-null ident. |
6b698a21 | 2568 | acl aclname src_as number ... |
2569 | acl aclname dst_as number ... | |
2570 | # Except for access control, AS numbers can be used for | |
9e7dbc51 | 2571 | # routing of requests to specific caches. Here's an |
2572 | # example for routing all requests for AS#1241 and only | |
6468fe10 | 2573 | # those to mycache.mydomain.net: |
2574 | # acl asexample dst_as 1241 | |
d87ebd78 | 2575 | # cache_peer_access mycache.mydomain.net allow asexample |
2576 | # cache_peer_access mycache_mydomain.net deny all | |
6468fe10 | 2577 | |
6b698a21 | 2578 | acl aclname proxy_auth [-i] username ... |
2579 | acl aclname proxy_auth_regex [-i] pattern ... | |
2580 | # list of valid usernames | |
c68e9c6b | 2581 | # use REQUIRED to accept any valid username. |
73e67ee0 | 2582 | # |
2583 | # NOTE: when a Proxy-Authentication header is sent but it is not | |
2584 | # needed during ACL checking the username is NOT logged | |
2585 | # in access.log. | |
c68e9c6b | 2586 | # |
2587 | # NOTE: proxy_auth requires a EXTERNAL authentication program | |
2588 | # to check username/password combinations (see | |
f7d2a450 | 2589 | # auth_param directive). |
c68e9c6b | 2590 | # |
d048c262 | 2591 | # NOTE: proxy_auth can't be used in a transparent proxy as |
2592 | # the browser needs to be configured for using a proxy in order | |
2593 | # to respond to proxy authentication. | |
934b03fc | 2594 | |
6b698a21 | 2595 | acl aclname snmp_community string ... |
2596 | # A community string to limit access to your SNMP Agent | |
dba79ac5 | 2597 | # Example: |
96d88dcb | 2598 | # |
dba79ac5 | 2599 | # acl snmppublic snmp_community public |
2600 | ||
6b698a21 | 2601 | acl aclname maxconn number |
2602 | # This will be matched when the client's IP address has | |
9bc73deb | 2603 | # more than <number> HTTP connections established. |
2604 | ||
6b698a21 | 2605 | acl aclname max_user_ip [-s] number |
2606 | # This will be matched when the user attempts to log in from more | |
c23e89cd | 2607 | # than <number> different ip addresses. The authenticate_ip_ttl |
60d096f4 | 2608 | # parameter controls the timeout on the ip entries. |
7f7db318 | 2609 | # If -s is specified the limit is strict, denying browsing |
be5caa55 | 2610 | # from any further IP addresses until the ttl has expired. Without |
c23e89cd | 2611 | # -s Squid will just annoy the user by "randomly" denying requests. |
7f7db318 | 2612 | # (the counter is reset each time the limit is reached and a |
be5caa55 | 2613 | # request is denied) |
2614 | # NOTE: in acceleration mode or where there is mesh of child proxies, | |
c23e89cd | 2615 | # clients may appear to come from multiple addresses if they are |
be5caa55 | 2616 | # going through proxy farms, so a limit of 1 may cause user problems. |
60d096f4 | 2617 | |
cccac0a2 | 2618 | acl aclname req_mime_type mime-type1 ... |
2619 | # regex match agains the mime type of the request generated | |
ba2b31a8 | 2620 | # by the client. Can be used to detect file upload or some |
5ac1a5b3 | 2621 | # types HTTP tunneling requests. |
ba2b31a8 | 2622 | # NOTE: This does NOT match the reply. You cannot use this |
2623 | # to match the returned file type. | |
c68e9c6b | 2624 | |
00634927 | 2625 | acl aclname req_header header-name [-i] any\.regex\.here |
2626 | # regex match against any of the known request headers. May be | |
2627 | # thought of as a superset of "browser", "referer" and "mime-type" | |
2628 | # ACLs. | |
2629 | ||
cccac0a2 | 2630 | acl aclname rep_mime_type mime-type1 ... |
5ac1a5b3 | 2631 | # regex match against the mime type of the reply received by |
c4ab8329 | 2632 | # squid. Can be used to detect file download or some |
5ac1a5b3 | 2633 | # types HTTP tunneling requests. |
c4ab8329 | 2634 | # NOTE: This has no effect in http_access rules. It only has |
2635 | # effect in rules that affect the reply data stream such as | |
2636 | # http_reply_access. | |
2637 | ||
00634927 | 2638 | acl aclname req_header header-name [-i] any\.regex\.here |
2639 | # regex match against any of the known request headers. May be | |
2640 | # thought of as a superset of "browser", "referer" and "mime-type" | |
2641 | # ACLs. | |
2642 | ||
cccac0a2 | 2643 | acl acl_name external class_name [arguments...] |
2644 | # external ACL lookup via a helper class defined by the | |
d9572179 | 2645 | # external_acl_type directive. |
c4ab8329 | 2646 | |
cccac0a2 | 2647 | acl aclname user_cert attribute values... |
2648 | # match against attributes in a user SSL certificate | |
a7ad6e4e | 2649 | # attribute is one of DN/C/O/CN/L/ST |
2650 | ||
cccac0a2 | 2651 | acl aclname ca_cert attribute values... |
2652 | # match against attributes a users issuing CA SSL certificate | |
a7ad6e4e | 2653 | # attribute is one of DN/C/O/CN/L/ST |
2654 | ||
cccac0a2 | 2655 | acl aclname ext_user username ... |
2656 | acl aclname ext_user_regex [-i] pattern ... | |
2657 | # string match on username returned by external acl processing | |
d95b862f | 2658 | # use REQUIRED to accept any non-null user name. |
2659 | ||
cccac0a2 | 2660 | Examples: |
5b807763 | 2661 | acl macaddress arp 09:00:2b:23:45:67 |
cccac0a2 | 2662 | acl myexample dst_as 1241 |
2663 | acl password proxy_auth REQUIRED | |
2664 | acl fileupload req_mime_type -i ^multipart/form-data$ | |
2665 | acl javascript rep_mime_type -i ^application/x-javascript$ | |
c68e9c6b | 2666 | |
cccac0a2 | 2667 | NOCOMMENT_START |
6b53c392 | 2668 | #Recommended minimum configuration: |
cccac0a2 | 2669 | acl all src 0.0.0.0/0.0.0.0 |
2670 | acl manager proto cache_object | |
2671 | acl localhost src 127.0.0.1/255.255.255.255 | |
2672 | acl to_localhost dst 127.0.0.0/8 | |
2673 | acl SSL_ports port 443 563 | |
2674 | acl Safe_ports port 80 # http | |
2675 | acl Safe_ports port 21 # ftp | |
2676 | acl Safe_ports port 443 563 # https, snews | |
2677 | acl Safe_ports port 70 # gopher | |
2678 | acl Safe_ports port 210 # wais | |
2679 | acl Safe_ports port 1025-65535 # unregistered ports | |
2680 | acl Safe_ports port 280 # http-mgmt | |
2681 | acl Safe_ports port 488 # gss-http | |
2682 | acl Safe_ports port 591 # filemaker | |
2683 | acl Safe_ports port 777 # multiling http | |
2684 | acl CONNECT method CONNECT | |
2685 | NOCOMMENT_END | |
2686 | DOC_END | |
2687 | ||
2688 | NAME: http_access | |
2689 | TYPE: acl_access | |
2690 | LOC: Config.accessList.http | |
2691 | DEFAULT: none | |
2692 | DEFAULT_IF_NONE: deny all | |
2693 | DOC_START | |
2694 | Allowing or Denying access based on defined access lists | |
2695 | ||
2696 | Access to the HTTP port: | |
2697 | http_access allow|deny [!]aclname ... | |
2698 | ||
2699 | NOTE on default values: | |
2700 | ||
2701 | If there are no "access" lines present, the default is to deny | |
2702 | the request. | |
2703 | ||
2704 | If none of the "access" lines cause a match, the default is the | |
2705 | opposite of the last line in the list. If the last line was | |
7f7db318 | 2706 | deny, the default is allow. Conversely, if the last line |
cccac0a2 | 2707 | is allow, the default will be deny. For these reasons, it is a |
2708 | good idea to have an "deny all" or "allow all" entry at the end | |
2709 | of your access lists to avoid potential confusion. | |
2710 | ||
2711 | NOCOMMENT_START | |
6b53c392 | 2712 | #Recommended minimum configuration: |
2713 | # | |
2714 | # Only allow cachemgr access from localhost | |
cccac0a2 | 2715 | http_access allow manager localhost |
2716 | http_access deny manager | |
6b53c392 | 2717 | # Deny requests to unknown ports |
cccac0a2 | 2718 | http_access deny !Safe_ports |
6b53c392 | 2719 | # Deny CONNECT to other than SSL ports |
cccac0a2 | 2720 | http_access deny CONNECT !SSL_ports |
c68e9c6b | 2721 | # |
7f7db318 | 2722 | # We strongly recommend the following be uncommented to protect innocent |
2723 | # web applications running on the proxy server who think the only | |
4cc6eb12 | 2724 | # one who can access services on "localhost" is a local user |
2725 | #http_access deny to_localhost | |
c68e9c6b | 2726 | # |
4cc6eb12 | 2727 | # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS |
2728 | ||
59f4a63e | 2729 | # Example rule allowing access from your local networks. Adapt |
b9d7fe3e | 2730 | # to list your (internal) IP networks from where browsing should |
2731 | # be allowed | |
2732 | #acl our_networks src 192.168.1.0/24 192.168.2.0/24 | |
2733 | #http_access allow our_networks | |
2734 | ||
6b53c392 | 2735 | # And finally deny all other access to this proxy |
cccac0a2 | 2736 | http_access deny all |
2737 | NOCOMMENT_END | |
2738 | DOC_END | |
c4ab8329 | 2739 | |
cccac0a2 | 2740 | NAME: http_reply_access |
2741 | TYPE: acl_access | |
2742 | LOC: Config.accessList.reply | |
2743 | DEFAULT: none | |
2744 | DEFAULT_IF_NONE: allow all | |
2745 | DOC_START | |
6845f129 | 2746 | Allow replies to client requests. This is complementary to http_access. |
c4ab8329 | 2747 | |
6845f129 | 2748 | http_reply_access allow|deny [!] aclname ... |
0976f8db | 2749 | |
6845f129 | 2750 | NOTE: if there are no access lines present, the default is to allow |
cccac0a2 | 2751 | all replies |
0976f8db | 2752 | |
6845f129 | 2753 | If none of the access lines cause a match the opposite of the |
2754 | last line will apply. Thus it is good practice to end the rules | |
2755 | with an "allow all" or "deny all" entry. | |
0976f8db | 2756 | |
cccac0a2 | 2757 | NOCOMMENT_START |
c4ab8329 | 2758 | #Recommended minimum configuration: |
2759 | # | |
2760 | # Insert your own rules here. | |
2761 | # | |
2762 | # | |
2763 | # and finally allow by default | |
cccac0a2 | 2764 | http_reply_access allow all |
2765 | NOCOMMENT_END | |
2766 | DOC_END | |
6b53c392 | 2767 | |
6b53c392 | 2768 | |
cccac0a2 | 2769 | NAME: icp_access |
2770 | TYPE: acl_access | |
2771 | LOC: Config.accessList.icp | |
2772 | DEFAULT: none | |
2773 | DEFAULT_IF_NONE: deny all | |
2774 | DOC_START | |
2775 | Allowing or Denying access to the ICP port based on defined | |
2776 | access lists | |
934b03fc | 2777 | |
cccac0a2 | 2778 | icp_access allow|deny [!]aclname ... |
0976f8db | 2779 | |
cccac0a2 | 2780 | See http_access for details |
0976f8db | 2781 | |
cccac0a2 | 2782 | NOCOMMENT_START |
403b5e7b | 2783 | #Allow ICP queries from everyone |
cccac0a2 | 2784 | icp_access allow all |
2785 | NOCOMMENT_END | |
2786 | DOC_END | |
934b03fc | 2787 | |
2788 | ||
cccac0a2 | 2789 | NAME: miss_access |
2790 | TYPE: acl_access | |
2791 | LOC: Config.accessList.miss | |
2792 | DEFAULT: none | |
2793 | DOC_START | |
2794 | Use to force your neighbors to use you as a sibling instead of | |
2795 | a parent. For example: | |
934b03fc | 2796 | |
cccac0a2 | 2797 | acl localclients src 172.16.0.0/16 |
2798 | miss_access allow localclients | |
2799 | miss_access deny !localclients | |
934b03fc | 2800 | |
7f7db318 | 2801 | This means only your local clients are allowed to fetch |
cccac0a2 | 2802 | MISSES and all other clients can only fetch HITS. |
934b03fc | 2803 | |
cccac0a2 | 2804 | By default, allow all clients who passed the http_access rules |
2805 | to fetch MISSES from us. | |
6b53c392 | 2806 | |
cccac0a2 | 2807 | NOCOMMENT_START |
6b53c392 | 2808 | #Default setting: |
2809 | # miss_access allow all | |
cccac0a2 | 2810 | NOCOMMENT_END |
2811 | DOC_END | |
2812 | ||
2813 | ||
2814 | NAME: cache_peer_access | |
2815 | TYPE: peer_access | |
2816 | DEFAULT: none | |
2817 | LOC: none | |
2818 | DOC_START | |
2819 | Similar to 'cache_peer_domain' but provides more flexibility by | |
2820 | using ACL elements. | |
2821 | ||
2822 | cache_peer_access cache-host allow|deny [!]aclname ... | |
2823 | ||
2824 | The syntax is identical to 'http_access' and the other lists of | |
2825 | ACL elements. See the comments for 'http_access' below, or | |
2826 | the Squid FAQ (http://www.squid-cache.org/FAQ/FAQ-10.html). | |
2827 | DOC_END | |
2828 | ||
2829 | NAME: ident_lookup_access | |
2830 | TYPE: acl_access | |
2831 | IFDEF: USE_IDENT | |
2832 | DEFAULT: none | |
2833 | DEFAULT_IF_NONE: deny all | |
2834 | LOC: Config.accessList.identLookup | |
2835 | DOC_START | |
2836 | A list of ACL elements which, if matched, cause an ident | |
2837 | (RFC 931) lookup to be performed for this request. For | |
2838 | example, you might choose to always perform ident lookups | |
2839 | for your main multi-user Unix boxes, but not for your Macs | |
2840 | and PCs. By default, ident lookups are not performed for | |
2841 | any requests. | |
2842 | ||
2843 | To enable ident lookups for specific client addresses, you | |
2844 | can follow this example: | |
2845 | ||
2846 | acl ident_aware_hosts src 198.168.1.0/255.255.255.0 | |
2847 | ident_lookup_access allow ident_aware_hosts | |
2848 | ident_lookup_access deny all | |
2849 | ||
2850 | Only src type ACL checks are fully supported. A src_domain | |
2851 | ACL might work at times, but it will not always provide | |
2852 | the correct result. | |
2853 | DOC_END | |
2854 | ||
2855 | NAME: tcp_outgoing_tos tcp_outgoing_ds tcp_outgoing_dscp | |
2856 | TYPE: acl_tos | |
2857 | DEFAULT: none | |
2858 | LOC: Config.accessList.outgoing_tos | |
2859 | DOC_START | |
2860 | Allows you to select a TOS/Diffserv value to mark outgoing | |
2861 | connections with, based on the username or source address | |
2862 | making the request. | |
2863 | ||
2864 | tcp_outgoing_tos ds-field [!]aclname ... | |
2865 | ||
2866 | Example where normal_service_net uses the TOS value 0x00 | |
2867 | and normal_service_net uses 0x20 | |
2868 | ||
2869 | acl normal_service_net src 10.0.0.0/255.255.255.0 | |
2870 | acl good_service_net src 10.0.1.0/255.255.255.0 | |
2871 | tcp_outgoing_tos 0x00 normal_service_net 0x00 | |
2872 | tcp_outgoing_tos 0x20 good_service_net | |
2873 | ||
2874 | TOS/DSCP values really only have local significance - so you should | |
2875 | know what you're specifying. For more, see RFC 2474 | |
2876 | ||
2877 | The TOS/DSCP byte must be exactly that - a byte, value 0 - 255, or | |
2878 | "default" to use whatever default your host has. | |
2879 | ||
2880 | Processing proceeds in the order specified, and stops at first fully | |
2881 | matching line. | |
2882 | DOC_END | |
2883 | ||
2884 | NAME: tcp_outgoing_address | |
2885 | TYPE: acl_address | |
2886 | DEFAULT: none | |
2887 | LOC: Config.accessList.outgoing_address | |
2888 | DOC_START | |
2889 | Allows you to map requests to different outgoing IP addresses | |
2890 | based on the username or sourceaddress of the user making | |
2891 | the request. | |
7f7db318 | 2892 | |
cccac0a2 | 2893 | tcp_outgoing_address ipaddr [[!]aclname] ... |
2894 | ||
5ac1a5b3 | 2895 | Example where requests from 10.0.0.0/24 will be forwarded |
7f7db318 | 2896 | with source address 10.1.0.1, 10.0.2.0/24 forwarded with |
cccac0a2 | 2897 | source address 10.1.0.2 and the rest will be forwarded with |
2898 | source address 10.1.0.3. | |
2899 | ||
2900 | acl normal_service_net src 10.0.0.0/255.255.255.0 | |
2901 | acl good_service_net src 10.0.1.0/255.255.255.0 | |
2902 | tcp_outgoing_address 10.0.0.1 normal_service_net | |
2903 | tcp_outgoing_address 10.0.0.2 good_service_net | |
2904 | tcp_outgoing_address 10.0.0.3 | |
2905 | ||
2906 | Processing proceeds in the order specified, and stops at first fully | |
2907 | matching line. | |
2908 | DOC_END | |
2909 | ||
4eb368f9 | 2910 | NAME: reply_header_max_size |
2911 | COMMENT: (KB) | |
2912 | TYPE: b_size_t | |
2913 | DEFAULT: 20 KB | |
2914 | LOC: Config.maxReplyHeaderSize | |
2915 | DOC_START | |
2916 | This specifies the maximum size for HTTP headers in a reply. | |
2917 | Reply headers are usually relatively small (about 512 bytes). | |
2918 | Placing a limit on the reply header size will catch certain | |
2919 | bugs (for example with persistent connections) and possibly | |
2920 | buffer-overflow or denial-of-service attacks. | |
2921 | DOC_END | |
2922 | ||
cccac0a2 | 2923 | NAME: reply_body_max_size |
2924 | COMMENT: size [acl acl...] | |
2925 | TYPE: acl_b_size_t | |
2926 | DEFAULT: none | |
2927 | LOC: Config.ReplyBodySize | |
2928 | DOC_START | |
6845f129 | 2929 | This option specifies the maximum size of a reply body. It can be |
cccac0a2 | 2930 | used to prevent users from downloading very large files, such as |
5ac1a5b3 | 2931 | MP3's and movies. When the reply headers are received, the |
cccac0a2 | 2932 | reply_body_max_size lines are processed, and the first line where |
5ac1a5b3 | 2933 | all (if any) listed ACLs are true is used as the maximum body size |
cccac0a2 | 2934 | for this reply. |
2935 | ||
7f7db318 | 2936 | This size is checked twice. First when we get the reply headers, |
cccac0a2 | 2937 | we check the content-length value. If the content length value exists |
2938 | and is larger than the allowed size, the request is denied and the | |
2939 | user receives an error message that says "the request or reply | |
2940 | is too large." If there is no content-length, and the reply | |
2941 | size exceeds this limit, the client's connection is just closed | |
2942 | and they will receive a partial reply. | |
2943 | ||
2944 | WARNING: downstream caches probably can not detect a partial reply | |
2945 | if there is no content-length header, so they will cache | |
2946 | partial responses and give them out as hits. You should NOT | |
2947 | use this option if you have downstream caches. | |
2948 | ||
2949 | WARNING: A maximum size smaller than the size of squid's error messages | |
2950 | will cause an infinite loop and crash squid. Ensure that the smallest | |
2951 | non-zero value you use is greater that the maximum header size plus | |
2952 | the size of your largest error page. | |
2953 | ||
2954 | If you set this parameter none (the default), there will be | |
2955 | no limit imposed. | |
2956 | DOC_END | |
2957 | ||
2958 | NAME: log_access | |
2959 | TYPE: acl_access | |
2960 | LOC: Config.accessList.log | |
2961 | DEFAULT: none | |
2962 | COMMENT: allow|deny acl acl... | |
2963 | DOC_START | |
6845f129 | 2964 | This options allows you to control which requests gets logged |
cccac0a2 | 2965 | to access.log (see access_log directive). Requests denied for |
2966 | logging will also not be accounted for in performance counters. | |
2967 | DOC_END | |
0976f8db | 2968 | |
cccac0a2 | 2969 | COMMENT_START |
2970 | ADMINISTRATIVE PARAMETERS | |
2971 | ----------------------------------------------------------------------------- | |
2972 | COMMENT_END | |
2973 | ||
2974 | NAME: cache_mgr | |
2975 | TYPE: string | |
2976 | DEFAULT: webmaster | |
2977 | LOC: Config.adminEmail | |
2978 | DOC_START | |
2979 | Email-address of local cache manager who will receive | |
2980 | mail if the cache dies. The default is "webmaster." | |
2981 | DOC_END | |
2982 | ||
2983 | ||
abacf776 | 2984 | NAME: mail_from |
2985 | TYPE: string | |
2986 | DEFAULT: none | |
2987 | LOC: Config.EmailFrom | |
2988 | DOC_START | |
2989 | From: email-address for mail sent when the cache dies. | |
2990 | The default is to use 'appname@unique_hostname'. | |
b8c0c06d | 2991 | Default appname value is "squid", can be changed into |
abacf776 | 2992 | src/globals.h before building squid. |
2993 | DOC_END | |
2994 | ||
2995 | ||
d084bf20 | 2996 | NAME: mail_program |
2997 | TYPE: eol | |
2998 | DEFAULT: mail | |
2999 | LOC: Config.EmailProgram | |
3000 | DOC_START | |
3001 | Email program used to send mail if the cache dies. | |
3002 | The default is "mail". The specified program must complain | |
3003 | with the standard Unix mail syntax: | |
3004 | mail_program recipient < mailfile | |
3005 | Optional command line options can be specified. | |
3006 | DOC_END | |
3007 | ||
3008 | ||
cccac0a2 | 3009 | NAME: cache_effective_user |
3010 | TYPE: string | |
3011 | DEFAULT: nobody | |
3012 | LOC: Config.effectiveUser | |
e3d74828 | 3013 | DOC_START |
3014 | If you start Squid as root, it will change its effective/real | |
3015 | UID/GID to the user specified below. The default is to change | |
3016 | to UID to nobody. If you define cache_effective_user, but not | |
3017 | cache_effective_group, Squid sets the GID to the effective | |
3018 | user's default group ID (taken from the password file) and | |
3019 | supplementary group list from the from groups membership of | |
3020 | cache_effective_user. | |
3021 | DOC_END | |
3022 | ||
cccac0a2 | 3023 | |
3024 | NAME: cache_effective_group | |
3025 | TYPE: string | |
3026 | DEFAULT: none | |
3027 | LOC: Config.effectiveGroup | |
3028 | DOC_START | |
e3d74828 | 3029 | If you want Squid to run with a specific GID regardless of |
3030 | the group memberships of the effective user then set this | |
3031 | to the group (or GID) you want Squid to run as. When set | |
3032 | all other group privileges of the effective user is ignored | |
3033 | and only this GID is effective. If Squid is not started as | |
3034 | root the user starting Squid must be member of the specified | |
3035 | group. | |
cccac0a2 | 3036 | DOC_END |
3037 | ||
3038 | ||
d3caee79 | 3039 | NAME: httpd_suppress_version_string |
3040 | COMMENT: on|off | |
3041 | TYPE: onoff | |
3042 | DEFAULT: off | |
3043 | LOC: Config.onoff.httpd_suppress_version_string | |
3044 | DOC_START | |
3045 | Suppress Squid version string info in HTTP headers and HTML error pages. | |
3046 | DOC_END | |
3047 | ||
3048 | ||
cccac0a2 | 3049 | NAME: visible_hostname |
3050 | TYPE: string | |
3051 | LOC: Config.visibleHostname | |
3052 | DEFAULT: none | |
3053 | DOC_START | |
3054 | If you want to present a special hostname in error messages, etc, | |
7f7db318 | 3055 | define this. Otherwise, the return value of gethostname() |
cccac0a2 | 3056 | will be used. If you have multiple caches in a cluster and |
3057 | get errors about IP-forwarding you must set them to have individual | |
3058 | names with this setting. | |
3059 | DOC_END | |
3060 | ||
3061 | ||
3062 | NAME: unique_hostname | |
3063 | TYPE: string | |
3064 | LOC: Config.uniqueHostname | |
3065 | DEFAULT: none | |
3066 | DOC_START | |
3067 | If you want to have multiple machines with the same | |
7f7db318 | 3068 | 'visible_hostname' you must give each machine a different |
3069 | 'unique_hostname' so forwarding loops can be detected. | |
cccac0a2 | 3070 | DOC_END |
3071 | ||
3072 | ||
3073 | NAME: hostname_aliases | |
3074 | TYPE: wordlist | |
3075 | LOC: Config.hostnameAliases | |
3076 | DEFAULT: none | |
3077 | DOC_START | |
7f7db318 | 3078 | A list of other DNS names your cache has. |
cccac0a2 | 3079 | DOC_END |
0976f8db | 3080 | |
cccac0a2 | 3081 | COMMENT_START |
3082 | OPTIONS FOR THE CACHE REGISTRATION SERVICE | |
3083 | ----------------------------------------------------------------------------- | |
3084 | ||
3085 | This section contains parameters for the (optional) cache | |
3086 | announcement service. This service is provided to help | |
3087 | cache administrators locate one another in order to join or | |
3088 | create cache hierarchies. | |
3089 | ||
3090 | An 'announcement' message is sent (via UDP) to the registration | |
3091 | service by Squid. By default, the announcement message is NOT | |
3092 | SENT unless you enable it with 'announce_period' below. | |
3093 | ||
3094 | The announcement message includes your hostname, plus the | |
3095 | following information from this configuration file: | |
3096 | ||
3097 | http_port | |
3098 | icp_port | |
3099 | cache_mgr | |
3100 | ||
3101 | All current information is processed regularly and made | |
3102 | available on the Web at http://www.ircache.net/Cache/Tracker/. | |
3103 | COMMENT_END | |
3104 | ||
3105 | NAME: announce_period | |
3106 | TYPE: time_t | |
3107 | LOC: Config.Announce.period | |
3108 | DEFAULT: 0 | |
3109 | DOC_START | |
3110 | This is how frequently to send cache announcements. The | |
3111 | default is `0' which disables sending the announcement | |
3112 | messages. | |
3113 | ||
3114 | To enable announcing your cache, just uncomment the line | |
3115 | below. | |
3116 | ||
3117 | NOCOMMENT_START | |
9e7dbc51 | 3118 | #To enable announcing your cache, just uncomment the line below. |
3119 | #announce_period 1 day | |
cccac0a2 | 3120 | NOCOMMENT_END |
3121 | DOC_END | |
3122 | ||
3123 | ||
3124 | NAME: announce_host | |
3125 | TYPE: string | |
3126 | DEFAULT: tracker.ircache.net | |
3127 | LOC: Config.Announce.host | |
3128 | DOC_NONE | |
3129 | ||
3130 | NAME: announce_file | |
3131 | TYPE: string | |
3132 | DEFAULT: none | |
3133 | LOC: Config.Announce.file | |
3134 | DOC_NONE | |
3135 | ||
3136 | NAME: announce_port | |
3137 | TYPE: ushort | |
3138 | DEFAULT: 3131 | |
3139 | LOC: Config.Announce.port | |
3140 | DOC_START | |
3141 | announce_host and announce_port set the hostname and port | |
3142 | number where the registration message will be sent. | |
3143 | ||
3144 | Hostname will default to 'tracker.ircache.net' and port will | |
3145 | default default to 3131. If the 'filename' argument is given, | |
3146 | the contents of that file will be included in the announce | |
3147 | message. | |
3148 | DOC_END | |
3149 | ||
3150 | NAME: httpd_accel_surrogate_id | |
3151 | IFDEF: ESI | |
3152 | TYPE: string | |
3153 | LOC: Config.Accel.surrogate_id | |
3154 | DEFAULT: unset-id | |
3155 | DOC_START | |
3156 | Surrogates (http://www.esi.org/architecture_spec_1.0.html) | |
3157 | need an identification token to allow control targeting. Because | |
3158 | a farm of surrogates may all perform the same tasks, they may share | |
3159 | an identification token. | |
3160 | DOC_END | |
3161 | ||
3162 | NAME: http_accel_surrogate_remote | |
3163 | IFDEF: ESI | |
3164 | COMMENT: on|off | |
3165 | TYPE: onoff | |
3166 | DEFAULT: off | |
3167 | LOC: Config.onoff.surrogate_is_remote | |
3168 | DOC_START | |
3169 | Remote surrogates (such as those in a CDN) honour Surrogate-Control: no-store-remote. | |
3170 | Set this to on to have squid behave as a remote surrogate. | |
3171 | DOC_END | |
3172 | ||
3173 | NAME: esi_parser | |
3174 | IFDEF: ESI | |
964b44c3 | 3175 | COMMENT: libxml2|expat|custom |
cccac0a2 | 3176 | TYPE: string |
3177 | LOC: ESIParser::Type | |
3178 | DEFAULT: custom | |
3179 | DOC_START | |
3180 | ESI markup is not strictly XML compatible. The custom ESI parser | |
3181 | will give higher performance, but cannot handle non ASCII character | |
3182 | encodings. | |
3183 | DOC_END | |
0976f8db | 3184 | |
cccac0a2 | 3185 | COMMENT_START |
3186 | MISCELLANEOUS | |
3187 | ----------------------------------------------------------------------------- | |
3188 | COMMENT_END | |
3189 | ||
3190 | NAME: dns_testnames | |
3191 | TYPE: wordlist | |
3192 | LOC: Config.dns_testname_list | |
3193 | DEFAULT: none | |
3194 | DEFAULT_IF_NONE: netscape.com internic.net nlanr.net microsoft.com | |
3195 | DOC_START | |
3196 | The DNS tests exit as soon as the first site is successfully looked up | |
3197 | ||
3198 | This test can be disabled with the -D command line option. | |
3199 | DOC_END | |
3200 | ||
3201 | ||
3202 | NAME: logfile_rotate | |
3203 | TYPE: int | |
3204 | DEFAULT: 10 | |
3205 | LOC: Config.Log.rotateNumber | |
3206 | DOC_START | |
3207 | Specifies the number of logfile rotations to make when you | |
87d69285 | 3208 | type 'squid -k rotate'. The default is 10, which will rotate |
3209 | with extensions 0 through 9. Setting logfile_rotate to 0 will | |
3210 | disable the file name rotation, but the logfiles are still closed | |
3211 | and re-opened. This will enable you to rename the logfiles | |
cccac0a2 | 3212 | yourself just before sending the rotate signal. |
3213 | ||
3214 | Note, the 'squid -k rotate' command normally sends a USR1 | |
3215 | signal to the running squid process. In certain situations | |
3216 | (e.g. on Linux with Async I/O), USR1 is used for other | |
3217 | purposes, so -k rotate uses another signal. It is best to get | |
3218 | in the habit of using 'squid -k rotate' instead of 'kill -USR1 | |
3219 | <pid>'. | |
3220 | DOC_END | |
3221 | ||
3222 | ||
3223 | NAME: append_domain | |
3224 | TYPE: string | |
3225 | LOC: Config.appendDomain | |
3226 | DEFAULT: none | |
3227 | DOC_START | |
3228 | Appends local domain name to hostnames without any dots in | |
3229 | them. append_domain must begin with a period. | |
3230 | ||
7f7db318 | 3231 | Be warned there are now Internet names with no dots in |
cccac0a2 | 3232 | them using only top-domain names, so setting this may |
3233 | cause some Internet sites to become unavailable. | |
3234 | ||
3235 | Example: | |
3236 | append_domain .yourdomain.com | |
3237 | DOC_END | |
3238 | ||
3239 | ||
3240 | NAME: tcp_recv_bufsize | |
3241 | COMMENT: (bytes) | |
3242 | TYPE: b_size_t | |
3243 | DEFAULT: 0 bytes | |
3244 | LOC: Config.tcpRcvBufsz | |
3245 | DOC_START | |
3246 | Size of receive buffer to set for TCP sockets. Probably just | |
3247 | as easy to change your kernel's default. Set to zero to use | |
3248 | the default buffer size. | |
3249 | DOC_END | |
3250 | ||
3251 | NAME: err_html_text | |
3252 | TYPE: eol | |
3253 | LOC: Config.errHtmlText | |
3254 | DEFAULT: none | |
3255 | DOC_START | |
3256 | HTML text to include in error messages. Make this a "mailto" | |
3257 | URL to your admin address, or maybe just a link to your | |
3258 | organizations Web page. | |
3259 | ||
3260 | To include this in your error messages, you must rewrite | |
3261 | the error template files (found in the "errors" directory). | |
3262 | Wherever you want the 'err_html_text' line to appear, | |
3263 | insert a %L tag in the error template file. | |
3264 | DOC_END | |
3265 | ||
3266 | NAME: email_err_data | |
3267 | COMMENT: on|off | |
3268 | TYPE: onoff | |
3269 | LOC: Config.onoff.emailErrData | |
3270 | DEFAULT: on | |
3271 | DOC_START | |
3272 | If enabled, information about the occurred error will be | |
3273 | included in the mailto links of the ERR pages (if %W is set) | |
7f7db318 | 3274 | so that the email body contains the data. |
cccac0a2 | 3275 | Syntax is <A HREF="mailto:%w%W">%w</A> |
3276 | DOC_END | |
3277 | ||
3278 | ||
3279 | NAME: deny_info | |
3280 | TYPE: denyinfo | |
3281 | LOC: Config.denyInfoList | |
3282 | DEFAULT: none | |
3283 | DOC_START | |
3284 | Usage: deny_info err_page_name acl | |
3285 | or deny_info http://... acl | |
3286 | Example: deny_info ERR_CUSTOM_ACCESS_DENIED bad_guys | |
3287 | ||
3288 | This can be used to return a ERR_ page for requests which | |
3289 | do not pass the 'http_access' rules. A single ACL will cause | |
3290 | the http_access check to fail. If a 'deny_info' line exists | |
7f7db318 | 3291 | for that ACL Squid returns a corresponding error page. |
cccac0a2 | 3292 | |
3293 | You may use ERR_ pages that come with Squid or create your own pages | |
3294 | and put them into the configured errors/ directory. | |
3295 | ||
7f7db318 | 3296 | Alternatively you can specify an error URL. The browsers will |
cccac0a2 | 3297 | get redirected (302) to the specified URL. %s in the redirection |
3298 | URL will be replaced by the requested URL. | |
3299 | ||
3300 | Alternatively you can tell Squid to reset the TCP connection | |
3301 | by specifying TCP_RESET. | |
3302 | DOC_END | |
3303 | ||
3304 | NAME: memory_pools | |
3305 | COMMENT: on|off | |
3306 | TYPE: onoff | |
3307 | DEFAULT: on | |
3308 | LOC: Config.onoff.mem_pools | |
3309 | DOC_START | |
3310 | If set, Squid will keep pools of allocated (but unused) memory | |
3311 | available for future use. If memory is a premium on your | |
3312 | system and you believe your malloc library outperforms Squid | |
3313 | routines, disable this. | |
3314 | DOC_END | |
3315 | ||
3316 | NAME: memory_pools_limit | |
3317 | COMMENT: (bytes) | |
3318 | TYPE: b_size_t | |
e838cf2f | 3319 | DEFAULT: 5 MB |
cccac0a2 | 3320 | LOC: Config.MemPools.limit |
3321 | DOC_START | |
3322 | Used only with memory_pools on: | |
3323 | memory_pools_limit 50 MB | |
3324 | ||
3325 | If set to a non-zero value, Squid will keep at most the specified | |
3326 | limit of allocated (but unused) memory in memory pools. All free() | |
3327 | requests that exceed this limit will be handled by your malloc | |
3328 | library. Squid does not pre-allocate any memory, just safe-keeps | |
3329 | objects that otherwise would be free()d. Thus, it is safe to set | |
3330 | memory_pools_limit to a reasonably high value even if your | |
3331 | configuration will use less memory. | |
3332 | ||
7e7e02e1 | 3333 | If set to zero, Squid will keep all memory it can. That is, there |
3334 | will be no limit on the total amount of memory used for safe-keeping. | |
cccac0a2 | 3335 | |
3336 | To disable memory allocation optimization, do not set | |
3337 | memory_pools_limit to 0. Set memory_pools to "off" instead. | |
3338 | ||
3339 | An overhead for maintaining memory pools is not taken into account | |
3340 | when the limit is checked. This overhead is close to four bytes per | |
3341 | object kept. However, pools may actually _save_ memory because of | |
3342 | reduced memory thrashing in your malloc library. | |
3343 | DOC_END | |
3344 | ||
3345 | NAME: via | |
3346 | IFDEF: HTTP_VIOLATIONS | |
3347 | COMMENT: on|off | |
3348 | TYPE: onoff | |
3349 | DEFAULT: on | |
3350 | LOC: Config.onoff.via | |
3351 | DOC_START | |
3352 | If set (default), Squid will include a Via header in requests and | |
3353 | replies as required by RFC2616. | |
3354 | DOC_END | |
3355 | ||
3356 | NAME: forwarded_for | |
3357 | COMMENT: on|off | |
3358 | TYPE: onoff | |
3359 | DEFAULT: on | |
3360 | LOC: opt_forwarded_for | |
3361 | DOC_START | |
3362 | If set, Squid will include your system's IP address or name | |
3363 | in the HTTP requests it forwards. By default it looks like | |
3364 | this: | |
3365 | ||
3366 | X-Forwarded-For: 192.1.2.3 | |
3367 | ||
3368 | If you disable this, it will appear as | |
3369 | ||
3370 | X-Forwarded-For: unknown | |
3371 | DOC_END | |
3372 | ||
3373 | NAME: log_icp_queries | |
3374 | COMMENT: on|off | |
3375 | TYPE: onoff | |
3376 | DEFAULT: on | |
3377 | LOC: Config.onoff.log_udp | |
3378 | DOC_START | |
3379 | If set, ICP queries are logged to access.log. You may wish | |
3380 | do disable this if your ICP load is VERY high to speed things | |
3381 | up or to simplify log analysis. | |
3382 | DOC_END | |
3383 | ||
3384 | NAME: icp_hit_stale | |
3385 | COMMENT: on|off | |
3386 | TYPE: onoff | |
3387 | DEFAULT: off | |
3388 | LOC: Config.onoff.icp_hit_stale | |
3389 | DOC_START | |
3390 | If you want to return ICP_HIT for stale cache objects, set this | |
3391 | option to 'on'. If you have sibling relationships with caches | |
3392 | in other administrative domains, this should be 'off'. If you only | |
7f7db318 | 3393 | have sibling relationships with caches under your control, |
cccac0a2 | 3394 | it is probably okay to set this to 'on'. |
7f7db318 | 3395 | If set to 'on', your siblings should use the option "allow-miss" |
cccac0a2 | 3396 | on their cache_peer lines for connecting to you. |
3397 | DOC_END | |
3398 | ||
3399 | ||
3400 | NAME: minimum_direct_hops | |
3401 | TYPE: int | |
3402 | DEFAULT: 4 | |
3403 | LOC: Config.minDirectHops | |
3404 | DOC_START | |
3405 | If using the ICMP pinging stuff, do direct fetches for sites | |
3406 | which are no more than this many hops away. | |
3407 | DOC_END | |
3408 | ||
3409 | NAME: minimum_direct_rtt | |
3410 | TYPE: int | |
3411 | DEFAULT: 400 | |
3412 | LOC: Config.minDirectRtt | |
3413 | DOC_START | |
3414 | If using the ICMP pinging stuff, do direct fetches for sites | |
3415 | which are no more than this many rtt milliseconds away. | |
3416 | DOC_END | |
3417 | ||
3418 | NAME: cachemgr_passwd | |
3419 | TYPE: cachemgrpasswd | |
3420 | DEFAULT: none | |
3421 | LOC: Config.passwd_list | |
3422 | DOC_START | |
3423 | Specify passwords for cachemgr operations. | |
3424 | ||
3425 | Usage: cachemgr_passwd password action action ... | |
3426 | ||
3427 | Some valid actions are (see cache manager menu for a full list): | |
3428 | 5min | |
3429 | 60min | |
3430 | asndb | |
3431 | authenticator | |
3432 | cbdata | |
3433 | client_list | |
3434 | comm_incoming | |
3435 | config * | |
3436 | counters | |
3437 | delay | |
3438 | digest_stats | |
3439 | dns | |
3440 | events | |
3441 | filedescriptors | |
3442 | fqdncache | |
3443 | histograms | |
3444 | http_headers | |
3445 | info | |
3446 | io | |
3447 | ipcache | |
3448 | mem | |
3449 | menu | |
3450 | netdb | |
3451 | non_peers | |
3452 | objects | |
3453 | offline_toggle * | |
3454 | pconn | |
3455 | peer_select | |
3456 | redirector | |
3457 | refresh | |
3458 | server_list | |
3459 | shutdown * | |
3460 | store_digest | |
3461 | storedir | |
3462 | utilization | |
3463 | via_headers | |
3464 | vm_objects | |
3465 | ||
3466 | * Indicates actions which will not be performed without a | |
3467 | valid password, others can be performed if not listed here. | |
3468 | ||
3469 | To disable an action, set the password to "disable". | |
3470 | To allow performing an action without a password, set the | |
3471 | password to "none". | |
3472 | ||
3473 | Use the keyword "all" to set the same password for all actions. | |
3474 | ||
3475 | Example: | |
3476 | cachemgr_passwd secret shutdown | |
3477 | cachemgr_passwd lesssssssecret info stats/objects | |
3478 | cachemgr_passwd disable all | |
3479 | DOC_END | |
3480 | ||
3481 | NAME: store_avg_object_size | |
3482 | COMMENT: (kbytes) | |
3483 | TYPE: kb_size_t | |
3484 | DEFAULT: 13 KB | |
3485 | LOC: Config.Store.avgObjectSize | |
3486 | DOC_START | |
3487 | Average object size, used to estimate number of objects your | |
3488 | cache can hold. See doc/Release-Notes-1.1.txt. The default is | |
3489 | 13 KB. | |
3490 | DOC_END | |
3491 | ||
3492 | NAME: store_objects_per_bucket | |
3493 | TYPE: int | |
3494 | DEFAULT: 20 | |
3495 | LOC: Config.Store.objectsPerBucket | |
3496 | DOC_START | |
3497 | Target number of objects per bucket in the store hash table. | |
3498 | Lowering this value increases the total number of buckets and | |
c8f4eac4 | 3499 | also the storage maintenance rate. The default is 20. |
cccac0a2 | 3500 | DOC_END |
3501 | ||
3502 | NAME: client_db | |
3503 | COMMENT: on|off | |
3504 | TYPE: onoff | |
3505 | DEFAULT: on | |
3506 | LOC: Config.onoff.client_db | |
3507 | DOC_START | |
7f7db318 | 3508 | If you want to disable collecting per-client statistics, |
cccac0a2 | 3509 | turn off client_db here. |
3510 | DOC_END | |
3511 | ||
3512 | ||
3513 | NAME: netdb_low | |
3514 | TYPE: int | |
3515 | DEFAULT: 900 | |
3516 | LOC: Config.Netdb.low | |
3517 | DOC_NONE | |
3518 | ||
3519 | NAME: netdb_high | |
3520 | TYPE: int | |
3521 | DEFAULT: 1000 | |
3522 | LOC: Config.Netdb.high | |
3523 | DOC_START | |
3524 | The low and high water marks for the ICMP measurement | |
3525 | database. These are counts, not percents. The defaults are | |
3526 | 900 and 1000. When the high water mark is reached, database | |
3527 | entries will be deleted until the low mark is reached. | |
3528 | DOC_END | |
3529 | ||
3530 | ||
3531 | NAME: netdb_ping_period | |
3532 | TYPE: time_t | |
3533 | LOC: Config.Netdb.period | |
3534 | DEFAULT: 5 minutes | |
3535 | DOC_START | |
3536 | The minimum period for measuring a site. There will be at | |
3537 | least this much delay between successive pings to the same | |
3538 | network. The default is five minutes. | |
3539 | DOC_END | |
3540 | ||
3541 | ||
3542 | NAME: query_icmp | |
3543 | COMMENT: on|off | |
3544 | TYPE: onoff | |
3545 | DEFAULT: off | |
3546 | LOC: Config.onoff.query_icmp | |
3547 | DOC_START | |
3548 | If you want to ask your peers to include ICMP data in their ICP | |
3549 | replies, enable this option. | |
3550 | ||
3551 | If your peer has configured Squid (during compilation) with | |
7f7db318 | 3552 | '--enable-icmp' that peer will send ICMP pings to origin server |
3553 | sites of the URLs it receives. If you enable this option the | |
cccac0a2 | 3554 | ICP replies from that peer will include the ICMP data (if available). |
3555 | Then, when choosing a parent cache, Squid will choose the parent with | |
3556 | the minimal RTT to the origin server. When this happens, the | |
3557 | hierarchy field of the access.log will be | |
3558 | "CLOSEST_PARENT_MISS". This option is off by default. | |
3559 | DOC_END | |
3560 | ||
3561 | NAME: test_reachability | |
3562 | COMMENT: on|off | |
3563 | TYPE: onoff | |
3564 | DEFAULT: off | |
3565 | LOC: Config.onoff.test_reachability | |
3566 | DOC_START | |
3567 | When this is 'on', ICP MISS replies will be ICP_MISS_NOFETCH | |
3568 | instead of ICP_MISS if the target host is NOT in the ICMP | |
3569 | database, or has a zero RTT. | |
3570 | DOC_END | |
3571 | ||
3572 | NAME: buffered_logs | |
3573 | COMMENT: on|off | |
3574 | TYPE: onoff | |
3575 | DEFAULT: off | |
3576 | LOC: Config.onoff.buffered_logs | |
3577 | DOC_START | |
3578 | cache.log log file is written with stdio functions, and as such | |
3579 | it can be buffered or unbuffered. By default it will be unbuffered. | |
3580 | Buffering it can speed up the writing slightly (though you are | |
3581 | unlikely to need to worry unless you run with tons of debugging | |
3582 | enabled in which case performance will suffer badly anyway..). | |
3583 | DOC_END | |
3584 | ||
4c3ef9b2 | 3585 | NAME: refresh_all_ims |
3586 | COMMENT: on|off | |
3587 | TYPE: onoff | |
3588 | DEFAULT: off | |
3589 | LOC: Config.onoff.refresh_all_ims | |
3590 | DOC_START | |
3591 | When you enable this option, squid will always check | |
3592 | the origin server for an update when a client sends an | |
3593 | If-Modified-Since request. Many browsers use IMS | |
3594 | requests when the user requests a reload, and this | |
3595 | ensures those clients receive the latest version. | |
3596 | ||
3597 | By default (off), squid may return a Not Modified response | |
3598 | based on the age of the cached version. | |
3599 | DOC_END | |
3600 | ||
cccac0a2 | 3601 | NAME: reload_into_ims |
3602 | IFDEF: HTTP_VIOLATIONS | |
3603 | COMMENT: on|off | |
3604 | TYPE: onoff | |
3605 | DEFAULT: off | |
3606 | LOC: Config.onoff.reload_into_ims | |
3607 | DOC_START | |
3608 | When you enable this option, client no-cache or ``reload'' | |
3609 | requests will be changed to If-Modified-Since requests. | |
3610 | Doing this VIOLATES the HTTP standard. Enabling this | |
3611 | feature could make you liable for problems which it | |
3612 | causes. | |
7f7db318 | 3613 | |
cccac0a2 | 3614 | see also refresh_pattern for a more selective approach. |
3615 | DOC_END | |
3616 | ||
3617 | NAME: always_direct | |
3618 | TYPE: acl_access | |
3619 | LOC: Config.accessList.AlwaysDirect | |
3620 | DEFAULT: none | |
3621 | DOC_START | |
3622 | Usage: always_direct allow|deny [!]aclname ... | |
3623 | ||
3624 | Here you can use ACL elements to specify requests which should | |
3625 | ALWAYS be forwarded directly to origin servers. For example, | |
3626 | to always directly forward requests for local servers use | |
3627 | something like: | |
3628 | ||
3629 | acl local-servers dstdomain my.domain.net | |
3630 | always_direct allow local-servers | |
3631 | ||
3632 | To always forward FTP requests directly, use | |
3633 | ||
3634 | acl FTP proto FTP | |
3635 | always_direct allow FTP | |
3636 | ||
3637 | NOTE: There is a similar, but opposite option named | |
3638 | 'never_direct'. You need to be aware that "always_direct deny | |
3639 | foo" is NOT the same thing as "never_direct allow foo". You | |
3640 | may need to use a deny rule to exclude a more-specific case of | |
3641 | some other rule. Example: | |
3642 | ||
3643 | acl local-external dstdomain external.foo.net | |
3644 | acl local-servers dstdomain .foo.net | |
3645 | always_direct deny local-external | |
3646 | always_direct allow local-servers | |
3647 | ||
3648 | This option replaces some v1.1 options such as local_domain | |
3649 | and local_ip. | |
3650 | DOC_END | |
3651 | ||
3652 | NAME: never_direct | |
3653 | TYPE: acl_access | |
3654 | LOC: Config.accessList.NeverDirect | |
3655 | DEFAULT: none | |
3656 | DOC_START | |
3657 | Usage: never_direct allow|deny [!]aclname ... | |
3658 | ||
3659 | never_direct is the opposite of always_direct. Please read | |
3660 | the description for always_direct if you have not already. | |
3661 | ||
3662 | With 'never_direct' you can use ACL elements to specify | |
3663 | requests which should NEVER be forwarded directly to origin | |
3664 | servers. For example, to force the use of a proxy for all | |
3665 | requests, except those in your local domain use something like: | |
3666 | ||
3667 | acl local-servers dstdomain .foo.net | |
3668 | acl all src 0.0.0.0/0.0.0.0 | |
3669 | never_direct deny local-servers | |
3670 | never_direct allow all | |
7f7db318 | 3671 | |
3672 | or if Squid is inside a firewall and there are local intranet | |
f939c0ca | 3673 | servers inside the firewall use something like: |
cccac0a2 | 3674 | |
3675 | acl local-intranet dstdomain .foo.net | |
3676 | acl local-external dstdomain external.foo.net | |
3677 | always_direct deny local-external | |
3678 | always_direct allow local-intranet | |
3679 | never_direct allow all | |
7f7db318 | 3680 | |
cccac0a2 | 3681 | This option replaces some v1.1 options such as inside_firewall |
3682 | and firewall_ip. | |
3683 | DOC_END | |
3684 | ||
8c01ada0 | 3685 | NAME: request_header_access |
cccac0a2 | 3686 | IFDEF: HTTP_VIOLATIONS |
3687 | TYPE: http_header_access[] | |
8c01ada0 | 3688 | LOC: Config.request_header_access |
cccac0a2 | 3689 | DEFAULT: none |
3690 | DOC_START | |
8c01ada0 | 3691 | Usage: request_header_access header_name allow|deny [!]aclname ... |
cccac0a2 | 3692 | |
3693 | WARNING: Doing this VIOLATES the HTTP standard. Enabling | |
3694 | this feature could make you liable for problems which it | |
3695 | causes. | |
3696 | ||
3697 | This option replaces the old 'anonymize_headers' and the | |
3698 | older 'http_anonymizer' option with something that is much | |
3699 | more configurable. This new method creates a list of ACLs | |
3700 | for each header, allowing you very fine-tuned header | |
3701 | mangling. | |
3702 | ||
8c01ada0 | 3703 | This option only applies to request headers, i.e., from the |
3704 | client to the server. | |
3705 | ||
cccac0a2 | 3706 | You can only specify known headers for the header name. |
3707 | Other headers are reclassified as 'Other'. You can also | |
3708 | refer to all the headers with 'All'. | |
3709 | ||
5ac1a5b3 | 3710 | For example, to achieve the same behavior as the old |
cccac0a2 | 3711 | 'http_anonymizer standard' option, you should use: |
3712 | ||
8c01ada0 | 3713 | request_header_access From deny all |
3714 | request_header_access Referer deny all | |
3715 | request_header_access Server deny all | |
3716 | request_header_access User-Agent deny all | |
3717 | request_header_access WWW-Authenticate deny all | |
3718 | request_header_access Link deny all | |
cccac0a2 | 3719 | |
3720 | Or, to reproduce the old 'http_anonymizer paranoid' feature | |
3721 | you should use: | |
3722 | ||
8c01ada0 | 3723 | request_header_access Allow allow all |
3724 | request_header_access Authorization allow all | |
3725 | request_header_access WWW-Authenticate allow all | |
141ab88c | 3726 | request_header_access Proxy-Authorization allow all |
3727 | request_header_access Proxy-Authenticate allow all | |
8c01ada0 | 3728 | request_header_access Cache-Control allow all |
3729 | request_header_access Content-Encoding allow all | |
3730 | request_header_access Content-Length allow all | |
3731 | request_header_access Content-Type allow all | |
3732 | request_header_access Date allow all | |
3733 | request_header_access Expires allow all | |
3734 | request_header_access Host allow all | |
3735 | request_header_access If-Modified-Since allow all | |
3736 | request_header_access Last-Modified allow all | |
3737 | request_header_access Location allow all | |
3738 | request_header_access Pragma allow all | |
3739 | request_header_access Accept allow all | |
3740 | request_header_access Accept-Charset allow all | |
3741 | request_header_access Accept-Encoding allow all | |
3742 | request_header_access Accept-Language allow all | |
3743 | request_header_access Content-Language allow all | |
3744 | request_header_access Mime-Version allow all | |
3745 | request_header_access Retry-After allow all | |
3746 | request_header_access Title allow all | |
3747 | request_header_access Connection allow all | |
3748 | request_header_access Proxy-Connection allow all | |
3749 | request_header_access All deny all | |
3750 | ||
3751 | although many of those are HTTP reply headers, and so should be | |
3752 | controlled with the reply_header_access directive. | |
3753 | ||
3754 | By default, all headers are allowed (no anonymizing is | |
3755 | performed). | |
3756 | DOC_END | |
3757 | ||
3758 | NAME: reply_header_access | |
3759 | IFDEF: HTTP_VIOLATIONS | |
3760 | TYPE: http_header_access[] | |
3761 | LOC: Config.reply_header_access | |
3762 | DEFAULT: none | |
3763 | DOC_START | |
3764 | Usage: reply_header_access header_name allow|deny [!]aclname ... | |
3765 | ||
3766 | WARNING: Doing this VIOLATES the HTTP standard. Enabling | |
3767 | this feature could make you liable for problems which it | |
3768 | causes. | |
3769 | ||
3770 | This option only applies to reply headers, i.e., from the | |
3771 | server to the client. | |
3772 | ||
3773 | This is the same as request_header_access, but in the other | |
3774 | direction. | |
3775 | ||
3776 | This option replaces the old 'anonymize_headers' and the | |
3777 | older 'http_anonymizer' option with something that is much | |
3778 | more configurable. This new method creates a list of ACLs | |
3779 | for each header, allowing you very fine-tuned header | |
3780 | mangling. | |
3781 | ||
3782 | You can only specify known headers for the header name. | |
3783 | Other headers are reclassified as 'Other'. You can also | |
3784 | refer to all the headers with 'All'. | |
3785 | ||
5ac1a5b3 | 3786 | For example, to achieve the same behavior as the old |
8c01ada0 | 3787 | 'http_anonymizer standard' option, you should use: |
3788 | ||
3789 | reply_header_access From deny all | |
3790 | reply_header_access Referer deny all | |
3791 | reply_header_access Server deny all | |
3792 | reply_header_access User-Agent deny all | |
3793 | reply_header_access WWW-Authenticate deny all | |
3794 | reply_header_access Link deny all | |
3795 | ||
3796 | Or, to reproduce the old 'http_anonymizer paranoid' feature | |
3797 | you should use: | |
3798 | ||
3799 | reply_header_access Allow allow all | |
3800 | reply_header_access Authorization allow all | |
3801 | reply_header_access WWW-Authenticate allow all | |
141ab88c | 3802 | reply_header_access Proxy-Authorization allow all |
3803 | reply_header_access Proxy-Authenticate allow all | |
8c01ada0 | 3804 | reply_header_access Cache-Control allow all |
3805 | reply_header_access Content-Encoding allow all | |
3806 | reply_header_access Content-Length allow all | |
3807 | reply_header_access Content-Type allow all | |
3808 | reply_header_access Date allow all | |
3809 | reply_header_access Expires allow all | |
3810 | reply_header_access Host allow all | |
3811 | reply_header_access If-Modified-Since allow all | |
3812 | reply_header_access Last-Modified allow all | |
3813 | reply_header_access Location allow all | |
3814 | reply_header_access Pragma allow all | |
3815 | reply_header_access Accept allow all | |
3816 | reply_header_access Accept-Charset allow all | |
3817 | reply_header_access Accept-Encoding allow all | |
3818 | reply_header_access Accept-Language allow all | |
3819 | reply_header_access Content-Language allow all | |
3820 | reply_header_access Mime-Version allow all | |
3821 | reply_header_access Retry-After allow all | |
3822 | reply_header_access Title allow all | |
3823 | reply_header_access Connection allow all | |
3824 | reply_header_access Proxy-Connection allow all | |
3825 | reply_header_access All deny all | |
3826 | ||
3827 | although the HTTP request headers won't be usefully controlled | |
3828 | by this directive -- see request_header_access for details. | |
cccac0a2 | 3829 | |
3830 | By default, all headers are allowed (no anonymizing is | |
3831 | performed). | |
3832 | DOC_END | |
3833 | ||
3834 | NAME: header_replace | |
3835 | IFDEF: HTTP_VIOLATIONS | |
3836 | TYPE: http_header_replace[] | |
8c01ada0 | 3837 | LOC: Config.request_header_access |
cccac0a2 | 3838 | DEFAULT: none |
3839 | DOC_START | |
3840 | Usage: header_replace header_name message | |
3841 | Example: header_replace User-Agent Nutscrape/1.0 (CP/M; 8-bit) | |
3842 | ||
3843 | This option allows you to change the contents of headers | |
3844 | denied with header_access above, by replacing them with | |
3845 | some fixed string. This replaces the old fake_user_agent | |
3846 | option. | |
3847 | ||
8c01ada0 | 3848 | This only applies to request headers, not reply headers. |
3849 | ||
cccac0a2 | 3850 | By default, headers are removed if denied. |
3851 | DOC_END | |
3852 | ||
3853 | NAME: icon_directory | |
3854 | TYPE: string | |
3855 | LOC: Config.icons.directory | |
3856 | DEFAULT: @DEFAULT_ICON_DIR@ | |
3857 | DOC_START | |
3858 | Where the icons are stored. These are normally kept in | |
3859 | @DEFAULT_ICON_DIR@ | |
3860 | DOC_END | |
3861 | ||
f024c970 | 3862 | NAME: global_internal_static |
3863 | TYPE: onoff | |
3864 | LOC: Config.onoff.global_internal_static | |
3865 | DEFAULT: on | |
3866 | DOC_START | |
3867 | This directive controls is Squid should intercept all requests for | |
3868 | /squid-internal-static/ no matter which host the URL is requesting | |
3869 | (default on setting), or if nothing special should be done for | |
3870 | such URLs (off setting). The purpose of this directive is to make | |
3871 | icons etc work better in complex cache hierarchies where it may | |
3872 | not always be possible for all corners in the cache mesh to reach | |
3873 | the server generating a directory listing. | |
3874 | DOC_END | |
3875 | ||
e72a0ec0 | 3876 | NAME: short_icon_urls |
3877 | TYPE: onoff | |
3878 | LOC: Config.icons.use_short_names | |
3879 | DEFAULT: on | |
3880 | DOC_START | |
7f7db318 | 3881 | If this is enabled Squid will use short URLs for icons. |
5ac1a5b3 | 3882 | If disabled it will revert to the old behavior of including |
e72a0ec0 | 3883 | it's own name and port in the URL. |
3884 | ||
3885 | If you run a complex cache hierarchy with a mix of Squid and | |
7f7db318 | 3886 | other proxies you may need to disable this directive. |
e72a0ec0 | 3887 | DOC_END |
3888 | ||
cccac0a2 | 3889 | NAME: error_directory |
3890 | TYPE: string | |
3891 | LOC: Config.errorDirectory | |
3892 | DEFAULT: @DEFAULT_ERROR_DIR@ | |
3893 | DOC_START | |
3894 | If you wish to create your own versions of the default | |
3895 | (English) error files, either to customize them to suit your | |
3896 | language or company copy the template English files to another | |
3897 | directory and point this tag at them. | |
3898 | DOC_END | |
3899 | ||
3900 | NAME: maximum_single_addr_tries | |
3901 | TYPE: int | |
3902 | LOC: Config.retry.maxtries | |
4ed0e075 | 3903 | DEFAULT: 1 |
cccac0a2 | 3904 | DOC_START |
3905 | This sets the maximum number of connection attempts for a | |
3906 | host that only has one address (for multiple-address hosts, | |
3907 | each address is tried once). | |
3908 | ||
4ed0e075 | 3909 | The default value is one attempt, the (not recommended) |
cccac0a2 | 3910 | maximum is 255 tries. A warning message will be generated |
3911 | if it is set to a value greater than ten. | |
4ed0e075 | 3912 | |
5ac1a5b3 | 3913 | Note: This is in addition to the request re-forwarding which |
4ed0e075 | 3914 | takes place if Squid fails to get a satisfying response. |
cccac0a2 | 3915 | DOC_END |
3916 | ||
5894ad28 | 3917 | NAME: retry_on_error |
3918 | TYPE: onoff | |
3919 | LOC: Config.retry.onerror | |
3920 | DEFAULT: off | |
3921 | DOC_START | |
3922 | If set to on Squid will automatically retry requests when | |
3923 | receiving an error response. This is mainly useful if you | |
3924 | are in a complex cache hierarchy to work around access | |
3925 | control errors. | |
3926 | DOC_END | |
3927 | ||
cccac0a2 | 3928 | NAME: snmp_port |
3929 | TYPE: ushort | |
3930 | LOC: Config.Port.snmp | |
3931 | DEFAULT: 3401 | |
3932 | IFDEF: SQUID_SNMP | |
3933 | DOC_START | |
3934 | Squid can now serve statistics and status information via SNMP. | |
3935 | By default it listens to port 3401 on the machine. If you don't | |
3936 | wish to use SNMP, set this to "0". | |
4ed0e075 | 3937 | |
7f7db318 | 3938 | Note: If you want Squid to use parents for all requests see |
4ed0e075 | 3939 | the never_direct directive. prefer_direct only modifies how Squid |
3940 | acts on cachable requests. | |
cccac0a2 | 3941 | DOC_END |
3942 | ||
3943 | NAME: snmp_access | |
3944 | TYPE: acl_access | |
3945 | LOC: Config.accessList.snmp | |
3946 | DEFAULT: none | |
3947 | DEFAULT_IF_NONE: deny all | |
3948 | IFDEF: SQUID_SNMP | |
3949 | DOC_START | |
3950 | Allowing or denying access to the SNMP port. | |
3951 | ||
3952 | All access to the agent is denied by default. | |
3953 | usage: | |
3954 | ||
3955 | snmp_access allow|deny [!]aclname ... | |
3956 | ||
3957 | Example: | |
3958 | snmp_access allow snmppublic localhost | |
3959 | snmp_access deny all | |
3960 | DOC_END | |
3961 | ||
3962 | NAME: snmp_incoming_address | |
3963 | TYPE: address | |
3964 | LOC: Config.Addrs.snmp_incoming | |
3965 | DEFAULT: 0.0.0.0 | |
3966 | IFDEF: SQUID_SNMP | |
3967 | DOC_NONE | |
3968 | NAME: snmp_outgoing_address | |
3969 | TYPE: address | |
3970 | LOC: Config.Addrs.snmp_outgoing | |
3971 | DEFAULT: 255.255.255.255 | |
3972 | IFDEF: SQUID_SNMP | |
3973 | DOC_START | |
3974 | Just like 'udp_incoming_address' above, but for the SNMP port. | |
3975 | ||
3976 | snmp_incoming_address is used for the SNMP socket receiving | |
3977 | messages from SNMP agents. | |
3978 | snmp_outgoing_address is used for SNMP packets returned to SNMP | |
3979 | agents. | |
3980 | ||
3981 | The default snmp_incoming_address (0.0.0.0) is to listen on all | |
3982 | available network interfaces. | |
3983 | ||
3984 | If snmp_outgoing_address is set to 255.255.255.255 (the default) | |
7f7db318 | 3985 | it will use the same socket as snmp_incoming_address. Only |
cccac0a2 | 3986 | change this if you want to have SNMP replies sent using another |
3987 | address than where this Squid listens for SNMP queries. | |
3988 | ||
3989 | NOTE, snmp_incoming_address and snmp_outgoing_address can not have | |
3990 | the same value since they both use port 3401. | |
3991 | DOC_END | |
3992 | ||
3993 | NAME: as_whois_server | |
3994 | TYPE: string | |
3995 | LOC: Config.as_whois_server | |
3996 | DEFAULT: whois.ra.net | |
3997 | DEFAULT_IF_NONE: whois.ra.net | |
3998 | DOC_START | |
3999 | WHOIS server to query for AS numbers. NOTE: AS numbers are | |
4000 | queried only when Squid starts up, not for every request. | |
4001 | DOC_END | |
4002 | ||
4003 | NAME: wccp_router | |
4004 | TYPE: address | |
4005 | LOC: Config.Wccp.router | |
4006 | DEFAULT: 0.0.0.0 | |
4007 | IFDEF: USE_WCCP | |
0b0cfcf2 | 4008 | DOC_NONE |
4009 | NAME: wccp2_router | |
4010 | TYPE: sockaddr_in_list | |
4011 | LOC: Config.Wccp2.router | |
4012 | DEFAULT: none | |
4013 | IFDEF: USE_WCCPv2 | |
cccac0a2 | 4014 | DOC_START |
4015 | Use this option to define your WCCP ``home'' router for | |
0b0cfcf2 | 4016 | Squid. |
4017 | ||
4018 | wccp_router supports a single WCCP(v1) router | |
4019 | ||
4020 | wccp2_router supports multiple WCCPv2 routers | |
4021 | ||
4022 | only one of the two may be used at the same time and defines | |
4023 | which version of WCCP to use. | |
cccac0a2 | 4024 | DOC_END |
4025 | ||
4026 | NAME: wccp_version | |
4027 | TYPE: int | |
4028 | LOC: Config.Wccp.version | |
4029 | DEFAULT: 4 | |
4030 | IFDEF: USE_WCCP | |
4031 | DOC_START | |
0b0cfcf2 | 4032 | This directive is only relevant if you need to set up WCCP(v1) |
4033 | to some very old and end-of-life Cisco routers. In all other | |
4034 | setups it must be left unset or at the default setting. | |
4035 | It defines an internal version in the WCCP(v1) protocol, | |
4036 | with version 4 being the officially documented protocol. | |
4037 | ||
4038 | According to some users, Cisco IOS 11.2 and earlier only | |
4039 | support WCCP version 3. If you're using that or an earlier | |
4040 | version of IOS, you may need to change this value to 3, otherwise | |
4041 | do not specify this parameter. | |
4042 | DOC_END | |
4043 | ||
4044 | NAME: wccp2_forwarding_method | |
4045 | TYPE: int | |
4046 | LOC: Config.Wccp2.forwarding_method | |
4047 | DEFAULT: 1 | |
4048 | IFDEF: USE_WCCPv2 | |
4049 | DOC_START | |
4050 | WCCP2 allows the setting of forwarding methods between the | |
4051 | router/switch and the cache. Valid values are as follows: | |
4052 | ||
4053 | 1 - GRE encapsulation (forward the packet in a GRE/WCCP tunnel) | |
4054 | 2 - L2 redirect (forward the packet using Layer 2/MAC rewriting) | |
4055 | ||
4056 | Currently (as of IOS 12.4) cisco routers only support GRE. | |
4057 | Cisco switches only support the L2 redirect assignment method. | |
4058 | DOC_END | |
4059 | ||
4060 | NAME: wccp2_return_method | |
4061 | TYPE: int | |
4062 | LOC: Config.Wccp2.return_method | |
4063 | DEFAULT: 1 | |
4064 | IFDEF: USE_WCCPv2 | |
4065 | DOC_START | |
4066 | WCCP2 allows the setting of return methods between the | |
4067 | router/switch and the cache for packets that the cache | |
4068 | decides not to handle. Valid values are as follows: | |
4069 | ||
4070 | 1 - GRE encapsulation (forward the packet in a GRE/WCCP tunnel) | |
4071 | 2 - L2 redirect (forward the packet using Layer 2/MAC rewriting) | |
4072 | ||
4073 | Currently (as of IOS 12.4) cisco routers only support GRE. | |
4074 | Cisco switches only support the L2 redirect assignment. | |
4075 | ||
4076 | If the "ip wccp redirect exclude in" command has been | |
4077 | enabled on the cache interface, then it is still safe for | |
4078 | the proxy server to use a l2 redirect method even if this | |
4079 | option is set to GRE. | |
4080 | DOC_END | |
4081 | ||
4082 | NAME: wccp2_service | |
4083 | TYPE: wccp2_service | |
4084 | LOC: Config.Wccp2.info | |
4085 | DEFAULT: none | |
4086 | DEFAULT_IF_NONE: standard 0 | |
4087 | IFDEF: USE_WCCPv2 | |
4088 | DOC_START | |
4089 | WCCP2 allows for multiple traffic services. There are two | |
4090 | types: "standard" and "dynamic". The standard type defines | |
4091 | one service id - http (id 0). The dynamic service ids can be from | |
4092 | 51 to 255 inclusive. In order to use a dynamic service id | |
4093 | one must define the type of traffic to be redirected; this is done | |
4094 | using the wccp2_service_info option. | |
4095 | ||
4096 | The "standard" type does not require a wccp2_service_info option, | |
4097 | just specifying the service id will suffice. | |
4098 | ||
4099 | MD5 service authentication can be enabled by adding | |
4100 | "password=<password>" to the end of this service declaration. | |
4101 | ||
4102 | Examples: | |
4103 | ||
4104 | wccp2_service standard 0 # for the 'web-cache' standard service | |
4105 | wccp2_service dynamic 80 # a dynamic service type which will be | |
4106 | # fleshed out with subsequent options. | |
4107 | wccp2_service standard 0 password=foo | |
4108 | ||
cccac0a2 | 4109 | DOC_END |
4110 | ||
0b0cfcf2 | 4111 | NAME: wccp2_service_info |
4112 | TYPE: wccp2_service_info | |
4113 | LOC: Config.Wccp2.info | |
4114 | DEFAULT: none | |
4115 | IFDEF: USE_WCCPv2 | |
4116 | DOC_START | |
4117 | Dynamic WCCPv2 services require further information to define the | |
4118 | traffic you wish to have diverted. | |
4119 | ||
4120 | The format is: | |
4121 | ||
4122 | wccp2_service_info <id> protocol=<protocol> flags=<flag>,<flag>.. | |
4123 | priority=<priority> ports=<port>,<port>.. | |
4124 | ||
4125 | The relevant WCCPv2 flags: | |
4126 | + src_ip_hash, dst_ip_hash | |
4127 | + source_port_hash, dest_port_hash | |
4128 | + src_ip_alt_hash, dst_ip_alt_hash | |
4129 | + src_port_alt_hash, dst_port_alt_hash | |
4130 | + ports_source | |
4131 | ||
4132 | The port list can be one to eight entries. | |
4133 | ||
4134 | Example: | |
4135 | ||
4136 | wccp2_service_info 80 protocol=tcp flags=src_ip_hash,ports_source | |
4137 | priority=240 ports=80 | |
4138 | ||
4139 | Note: the service id must have been defined by a previous | |
4140 | 'wccp2_service dynamic <id>' entry. | |
4141 | DOC_END | |
4142 | ||
4143 | NAME: wccp_address | |
cccac0a2 | 4144 | TYPE: address |
0b0cfcf2 | 4145 | LOC: Config.Wccp.address |
cccac0a2 | 4146 | DEFAULT: 0.0.0.0 |
4147 | IFDEF: USE_WCCP | |
4148 | DOC_NONE | |
0b0cfcf2 | 4149 | NAME: wccp2_address |
cccac0a2 | 4150 | TYPE: address |
0b0cfcf2 | 4151 | LOC: Config.Wccp2.address |
4152 | DEFAULT: 0.0.0.0 | |
4153 | IFDEF: USE_WCCPv2 | |
cccac0a2 | 4154 | DOC_START |
0b0cfcf2 | 4155 | Use this option if you require WCCP to use a specific |
4156 | interface address. | |
cccac0a2 | 4157 | |
6845f129 | 4158 | The default behavior is to not bind to any specific address. |
cccac0a2 | 4159 | DOC_END |
0976f8db | 4160 | |
0976f8db | 4161 | |
cccac0a2 | 4162 | COMMENT_START |
4163 | DELAY POOL PARAMETERS (all require DELAY_POOLS compilation option) | |
4164 | ----------------------------------------------------------------------------- | |
4165 | COMMENT_END | |
4166 | ||
4167 | NAME: delay_pools | |
4168 | TYPE: delay_pool_count | |
4169 | DEFAULT: 0 | |
4170 | IFDEF: DELAY_POOLS | |
4171 | LOC: Config.Delay | |
4172 | DOC_START | |
4173 | This represents the number of delay pools to be used. For example, | |
4174 | if you have one class 2 delay pool and one class 3 delays pool, you | |
4175 | have a total of 2 delay pools. | |
4176 | DOC_END | |
4177 | ||
4178 | NAME: delay_class | |
4179 | TYPE: delay_pool_class | |
4180 | DEFAULT: none | |
4181 | IFDEF: DELAY_POOLS | |
4182 | LOC: Config.Delay | |
4183 | DOC_START | |
4184 | This defines the class of each delay pool. There must be exactly one | |
4185 | delay_class line for each delay pool. For example, to define two | |
4186 | delay pools, one of class 2 and one of class 3, the settings above | |
4187 | and here would be: | |
4188 | ||
4189 | Example: | |
4190 | delay_pools 4 # 4 delay pools | |
4191 | delay_class 1 2 # pool 1 is a class 2 pool | |
4192 | delay_class 2 3 # pool 2 is a class 3 pool | |
4193 | delay_class 3 4 # pool 3 is a class 4 pool | |
4194 | delay_class 4 5 # pool 4 is a class 5 pool | |
4195 | ||
4196 | The delay pool classes are: | |
4197 | ||
4198 | class 1 Everything is limited by a single aggregate | |
4199 | bucket. | |
4200 | ||
4201 | class 2 Everything is limited by a single aggregate | |
4202 | bucket as well as an "individual" bucket chosen | |
4203 | from bits 25 through 32 of the IP address. | |
4204 | ||
4205 | class 3 Everything is limited by a single aggregate | |
4206 | bucket as well as a "network" bucket chosen | |
4207 | from bits 17 through 24 of the IP address and a | |
4208 | "individual" bucket chosen from bits 17 through | |
4209 | 32 of the IP address. | |
7f7db318 | 4210 | |
4211 | class 4 Everything in a class 3 delay pool, with an | |
cccac0a2 | 4212 | additional limit on a per user basis. This |
4213 | only takes effect if the username is established | |
4214 | in advance - by forcing authentication in your | |
4215 | http_access rules. | |
4216 | ||
7f7db318 | 4217 | class 5 Requests are grouped according their tag (see |
cccac0a2 | 4218 | external_acl's tag= reply). |
4219 | ||
4220 | NOTE: If an IP address is a.b.c.d | |
4221 | -> bits 25 through 32 are "d" | |
4222 | -> bits 17 through 24 are "c" | |
4223 | -> bits 17 through 32 are "c * 256 + d" | |
4224 | DOC_END | |
4225 | ||
4226 | NAME: delay_access | |
4227 | TYPE: delay_pool_access | |
4228 | DEFAULT: none | |
4229 | IFDEF: DELAY_POOLS | |
4230 | LOC: Config.Delay | |
4231 | DOC_START | |
4232 | This is used to determine which delay pool a request falls into. | |
8ed8fda3 | 4233 | |
4234 | delay_access is sorted per pool and the matching starts with pool 1, | |
4235 | then pool 2, ..., and finally pool N. The first delay pool where the | |
4236 | request is allowed is selected for the request. If it does not allow | |
4237 | the request to any pool then the request is not delayed (default). | |
4238 | ||
4239 | For example, if you want some_big_clients in delay | |
cccac0a2 | 4240 | pool 1 and lotsa_little_clients in delay pool 2: |
4241 | ||
4242 | Example: | |
4243 | delay_access 1 allow some_big_clients | |
4244 | delay_access 1 deny all | |
4245 | delay_access 2 allow lotsa_little_clients | |
4246 | delay_access 2 deny all | |
4247 | delay_access 3 allow authenticated_clients | |
4248 | DOC_END | |
4249 | ||
4250 | NAME: delay_parameters | |
4251 | TYPE: delay_pool_rates | |
4252 | DEFAULT: none | |
4253 | IFDEF: DELAY_POOLS | |
4254 | LOC: Config.Delay | |
4255 | DOC_START | |
4256 | This defines the parameters for a delay pool. Each delay pool has | |
4257 | a number of "buckets" associated with it, as explained in the | |
4258 | description of delay_class. For a class 1 delay pool, the syntax is: | |
4259 | ||
4260 | delay_parameters pool aggregate | |
4261 | ||
4262 | For a class 2 delay pool: | |
4263 | ||
4264 | delay_parameters pool aggregate individual | |
4265 | ||
4266 | For a class 3 delay pool: | |
4267 | ||
4268 | delay_parameters pool aggregate network individual | |
4269 | ||
4270 | For a class 4 delay pool: | |
4271 | ||
4272 | delay_parameters pool aggregate network individual user | |
4273 | ||
4274 | For a class 5 delay pool: | |
4275 | ||
4276 | delay_parameters pool tag | |
4277 | ||
4278 | The variables here are: | |
4279 | ||
4280 | pool a pool number - ie, a number between 1 and the | |
4281 | number specified in delay_pools as used in | |
4282 | delay_class lines. | |
4283 | ||
4284 | aggregate the "delay parameters" for the aggregate bucket | |
4285 | (class 1, 2, 3). | |
4286 | ||
4287 | individual the "delay parameters" for the individual | |
4288 | buckets (class 2, 3). | |
4289 | ||
4290 | network the "delay parameters" for the network buckets | |
4291 | (class 3). | |
4292 | ||
4293 | user the delay parameters for the user buckets | |
4294 | (class 4). | |
4295 | ||
4296 | tag the delay parameters for the tag buckets | |
4297 | (class 5). | |
4298 | ||
4299 | A pair of delay parameters is written restore/maximum, where restore is | |
4300 | the number of bytes (not bits - modem and network speeds are usually | |
4301 | quoted in bits) per second placed into the bucket, and maximum is the | |
4302 | maximum number of bytes which can be in the bucket at any time. | |
4303 | ||
4304 | For example, if delay pool number 1 is a class 2 delay pool as in the | |
4305 | above example, and is being used to strictly limit each host to 64kbps | |
4306 | (plus overheads), with no overall limit, the line is: | |
4307 | ||
4308 | delay_parameters 1 -1/-1 8000/8000 | |
4309 | ||
4310 | Note that the figure -1 is used to represent "unlimited". | |
4311 | ||
4312 | And, if delay pool number 2 is a class 3 delay pool as in the above | |
4313 | example, and you want to limit it to a total of 256kbps (strict limit) | |
4314 | with each 8-bit network permitted 64kbps (strict limit) and each | |
4315 | individual host permitted 4800bps with a bucket maximum size of 64kb | |
4316 | to permit a decent web page to be downloaded at a decent speed | |
4317 | (if the network is not being limited due to overuse) but slow down | |
4318 | large downloads more significantly: | |
4319 | ||
4320 | delay_parameters 2 32000/32000 8000/8000 600/8000 | |
4321 | ||
4322 | There must be one delay_parameters line for each delay pool. | |
4323 | ||
4324 | Finally, for a class 4 delay pool as in the example - each user will | |
4325 | be limited to 128Kb no matter how many workstations they are logged into.: | |
7f7db318 | 4326 | |
cccac0a2 | 4327 | delay_parameters 4 32000/32000 8000/8000 600/64000 16000/16000 |
4328 | DOC_END | |
4329 | ||
4330 | NAME: delay_initial_bucket_level | |
4331 | COMMENT: (percent, 0-100) | |
4332 | TYPE: ushort | |
4333 | DEFAULT: 50 | |
4334 | IFDEF: DELAY_POOLS | |
4335 | LOC: Config.Delay.initial | |
4336 | DOC_START | |
4337 | The initial bucket percentage is used to determine how much is put | |
4338 | in each bucket when squid starts, is reconfigured, or first notices | |
4339 | a host accessing it (in class 2 and class 3, individual hosts and | |
4340 | networks only have buckets associated with them once they have been | |
4341 | "seen" by squid). | |
4342 | DOC_END | |
4343 | ||
4344 | NAME: incoming_icp_average | |
4345 | TYPE: int | |
4346 | DEFAULT: 6 | |
4347 | LOC: Config.comm_incoming.icp_average | |
4348 | DOC_NONE | |
4349 | ||
4350 | NAME: incoming_http_average | |
4351 | TYPE: int | |
4352 | DEFAULT: 4 | |
4353 | LOC: Config.comm_incoming.http_average | |
4354 | DOC_NONE | |
4355 | ||
4356 | NAME: incoming_dns_average | |
4357 | TYPE: int | |
4358 | DEFAULT: 4 | |
4359 | LOC: Config.comm_incoming.dns_average | |
4360 | DOC_NONE | |
4361 | ||
4362 | NAME: min_icp_poll_cnt | |
4363 | TYPE: int | |
4364 | DEFAULT: 8 | |
4365 | LOC: Config.comm_incoming.icp_min_poll | |
4366 | DOC_NONE | |
4367 | ||
4368 | NAME: min_dns_poll_cnt | |
4369 | TYPE: int | |
4370 | DEFAULT: 8 | |
4371 | LOC: Config.comm_incoming.dns_min_poll | |
4372 | DOC_NONE | |
4373 | ||
4374 | NAME: min_http_poll_cnt | |
4375 | TYPE: int | |
4376 | DEFAULT: 8 | |
4377 | LOC: Config.comm_incoming.http_min_poll | |
4378 | DOC_START | |
4379 | Heavy voodoo here. I can't even believe you are reading this. | |
4380 | Are you crazy? Don't even think about adjusting these unless | |
4381 | you understand the algorithms in comm_select.c first! | |
4382 | DOC_END | |
4383 | ||
4384 | NAME: max_open_disk_fds | |
4385 | TYPE: int | |
4386 | LOC: Config.max_open_disk_fds | |
4387 | DEFAULT: 0 | |
4388 | DOC_START | |
4389 | To avoid having disk as the I/O bottleneck Squid can optionally | |
4390 | bypass the on-disk cache if more than this amount of disk file | |
4391 | descriptors are open. | |
4392 | ||
4393 | A value of 0 indicates no limit. | |
4394 | DOC_END | |
4395 | ||
4396 | NAME: offline_mode | |
4397 | TYPE: onoff | |
4398 | LOC: Config.onoff.offline | |
4399 | DEFAULT: off | |
4400 | DOC_START | |
4401 | Enable this option and Squid will never try to validate cached | |
4402 | objects. | |
4403 | DOC_END | |
4404 | ||
4405 | NAME: uri_whitespace | |
4406 | TYPE: uri_whitespace | |
4407 | LOC: Config.uri_whitespace | |
4408 | DEFAULT: strip | |
4409 | DOC_START | |
4410 | What to do with requests that have whitespace characters in the | |
4411 | URI. Options: | |
4412 | ||
4413 | strip: The whitespace characters are stripped out of the URL. | |
4414 | This is the behavior recommended by RFC2396. | |
4415 | deny: The request is denied. The user receives an "Invalid | |
4416 | Request" message. | |
4417 | allow: The request is allowed and the URI is not changed. The | |
4418 | whitespace characters remain in the URI. Note the | |
4419 | whitespace is passed to redirector processes if they | |
4420 | are in use. | |
4421 | encode: The request is allowed and the whitespace characters are | |
4422 | encoded according to RFC1738. This could be considered | |
4423 | a violation of the HTTP/1.1 | |
4424 | RFC because proxies are not allowed to rewrite URI's. | |
4425 | chop: The request is allowed and the URI is chopped at the | |
4426 | first whitespace. This might also be considered a | |
4427 | violation. | |
4428 | DOC_END | |
4429 | ||
4430 | NAME: broken_posts | |
4431 | TYPE: acl_access | |
4432 | DEFAULT: none | |
4433 | LOC: Config.accessList.brokenPosts | |
4434 | DOC_START | |
4435 | A list of ACL elements which, if matched, causes Squid to send | |
4436 | an extra CRLF pair after the body of a PUT/POST request. | |
4437 | ||
4438 | Some HTTP servers has broken implementations of PUT/POST, | |
4439 | and rely on an extra CRLF pair sent by some WWW clients. | |
4440 | ||
4441 | Quote from RFC 2068 section 4.1 on this matter: | |
4442 | ||
4443 | Note: certain buggy HTTP/1.0 client implementations generate an | |
4444 | extra CRLF's after a POST request. To restate what is explicitly | |
4445 | forbidden by the BNF, an HTTP/1.1 client must not preface or follow | |
4446 | a request with an extra CRLF. | |
4447 | ||
4448 | Example: | |
4449 | acl buggy_server url_regex ^http://.... | |
4450 | broken_posts allow buggy_server | |
4451 | DOC_END | |
4452 | ||
4453 | NAME: mcast_miss_addr | |
4454 | IFDEF: MULTICAST_MISS_STREAM | |
4455 | TYPE: address | |
4456 | LOC: Config.mcast_miss.addr | |
4457 | DEFAULT: 255.255.255.255 | |
4458 | DOC_START | |
4459 | If you enable this option, every "cache miss" URL will | |
4460 | be sent out on the specified multicast address. | |
4461 | ||
4462 | Do not enable this option unless you are are absolutely | |
4463 | certain you understand what you are doing. | |
4464 | DOC_END | |
4465 | ||
4466 | NAME: mcast_miss_ttl | |
964b44c3 | 4467 | IFDEF: MULTICAST_MISS_STREAM |
cccac0a2 | 4468 | TYPE: ushort |
4469 | LOC: Config.mcast_miss.ttl | |
4470 | DEFAULT: 16 | |
4471 | DOC_START | |
4472 | This is the time-to-live value for packets multicasted | |
4473 | when multicasting off cache miss URLs is enabled. By | |
4474 | default this is set to 'site scope', i.e. 16. | |
4475 | DOC_END | |
4476 | ||
4477 | NAME: mcast_miss_port | |
4478 | IFDEF: MULTICAST_MISS_STREAM | |
4479 | TYPE: ushort | |
4480 | LOC: Config.mcast_miss.port | |
4481 | DEFAULT: 3135 | |
4482 | DOC_START | |
4483 | This is the port number to be used in conjunction with | |
4484 | 'mcast_miss_addr'. | |
4485 | DOC_END | |
4486 | ||
4487 | NAME: mcast_miss_encode_key | |
4488 | IFDEF: MULTICAST_MISS_STREAM | |
4489 | TYPE: string | |
4490 | LOC: Config.mcast_miss.encode_key | |
4491 | DEFAULT: XXXXXXXXXXXXXXXX | |
4492 | DOC_START | |
4493 | The URLs that are sent in the multicast miss stream are | |
4494 | encrypted. This is the encryption key. | |
4495 | DOC_END | |
4496 | ||
4497 | NAME: nonhierarchical_direct | |
4498 | TYPE: onoff | |
4499 | LOC: Config.onoff.nonhierarchical_direct | |
4500 | DEFAULT: on | |
4501 | DOC_START | |
4502 | By default, Squid will send any non-hierarchical requests | |
4503 | (matching hierarchy_stoplist or not cachable request type) direct | |
4504 | to origin servers. | |
4505 | ||
7f7db318 | 4506 | If you set this to off, Squid will prefer to send these |
cccac0a2 | 4507 | requests to parents. |
4508 | ||
4509 | Note that in most configurations, by turning this off you will only | |
4510 | add latency to these request without any improvement in global hit | |
4511 | ratio. | |
4512 | ||
7f7db318 | 4513 | If you are inside an firewall see never_direct instead of |
cccac0a2 | 4514 | this directive. |
4515 | DOC_END | |
4516 | ||
4517 | NAME: prefer_direct | |
4518 | TYPE: onoff | |
4519 | LOC: Config.onoff.prefer_direct | |
4520 | DEFAULT: off | |
4521 | DOC_START | |
7f7db318 | 4522 | Normally Squid tries to use parents for most requests. If you for some |
cccac0a2 | 4523 | reason like it to first try going direct and only use a parent if |
7f7db318 | 4524 | going direct fails set this to on. |
cccac0a2 | 4525 | |
4526 | By combining nonhierarchical_direct off and prefer_direct on you | |
4527 | can set up Squid to use a parent as a backup path if going direct | |
4528 | fails. | |
4529 | DOC_END | |
4530 | ||
4531 | NAME: strip_query_terms | |
4532 | TYPE: onoff | |
4533 | LOC: Config.onoff.strip_query_terms | |
4534 | DEFAULT: on | |
4535 | DOC_START | |
4536 | By default, Squid strips query terms from requested URLs before | |
4537 | logging. This protects your user's privacy. | |
4538 | DOC_END | |
4539 | ||
4540 | NAME: coredump_dir | |
4541 | TYPE: string | |
4542 | LOC: Config.coredump_dir | |
4543 | DEFAULT: none | |
4544 | DEFAULT_IF_NONE: none | |
4545 | DOC_START | |
4546 | By default Squid leaves core files in the directory from where | |
4547 | it was started. If you set 'coredump_dir' to a directory | |
4548 | that exists, Squid will chdir() to that directory at startup | |
4549 | and coredump files will be left there. | |
4550 | ||
4551 | NOCOMMENT_START | |
5ff76111 | 4552 | # Leave coredumps in the first cache dir |
cccac0a2 | 4553 | coredump_dir @DEFAULT_SWAP_DIR@ |
4554 | NOCOMMENT_END | |
4555 | DOC_END | |
4556 | ||
4557 | NAME: redirector_bypass | |
4558 | TYPE: onoff | |
4559 | LOC: Config.onoff.redirector_bypass | |
4560 | DEFAULT: off | |
4561 | DOC_START | |
4562 | When this is 'on', a request will not go through the | |
4563 | redirector if all redirectors are busy. If this is 'off' | |
4564 | and the redirector queue grows too large, Squid will exit | |
4565 | with a FATAL error and ask you to increase the number of | |
4566 | redirectors. You should only enable this if the redirectors | |
4567 | are not critical to your caching system. If you use | |
4568 | redirectors for access control, and you enable this option, | |
7f7db318 | 4569 | users may have access to pages they should not |
cccac0a2 | 4570 | be allowed to request. |
4571 | DOC_END | |
4572 | ||
4573 | NAME: ignore_unknown_nameservers | |
4574 | TYPE: onoff | |
4575 | LOC: Config.onoff.ignore_unknown_nameservers | |
4576 | DEFAULT: on | |
4577 | DOC_START | |
4578 | By default Squid checks that DNS responses are received | |
7f7db318 | 4579 | from the same IP addresses they are sent to. If they |
cccac0a2 | 4580 | don't match, Squid ignores the response and writes a warning |
4581 | message to cache.log. You can allow responses from unknown | |
4582 | nameservers by setting this option to 'off'. | |
4583 | DOC_END | |
4584 | ||
4585 | NAME: digest_generation | |
4586 | IFDEF: USE_CACHE_DIGESTS | |
4587 | TYPE: onoff | |
4588 | LOC: Config.onoff.digest_generation | |
4589 | DEFAULT: on | |
4590 | DOC_START | |
4591 | This controls whether the server will generate a Cache Digest | |
4592 | of its contents. By default, Cache Digest generation is | |
4593 | enabled if Squid is compiled with USE_CACHE_DIGESTS defined. | |
4594 | DOC_END | |
4595 | ||
4596 | NAME: digest_bits_per_entry | |
4597 | IFDEF: USE_CACHE_DIGESTS | |
4598 | TYPE: int | |
4599 | LOC: Config.digest.bits_per_entry | |
4600 | DEFAULT: 5 | |
4601 | DOC_START | |
4602 | This is the number of bits of the server's Cache Digest which | |
4603 | will be associated with the Digest entry for a given HTTP | |
4604 | Method and URL (public key) combination. The default is 5. | |
4605 | DOC_END | |
4606 | ||
4607 | NAME: digest_rebuild_period | |
4608 | IFDEF: USE_CACHE_DIGESTS | |
4609 | COMMENT: (seconds) | |
4610 | TYPE: time_t | |
4611 | LOC: Config.digest.rebuild_period | |
4612 | DEFAULT: 1 hour | |
4613 | DOC_START | |
4614 | This is the number of seconds between Cache Digest rebuilds. | |
4615 | DOC_END | |
4616 | ||
4617 | NAME: digest_rewrite_period | |
4618 | COMMENT: (seconds) | |
4619 | IFDEF: USE_CACHE_DIGESTS | |
4620 | TYPE: time_t | |
4621 | LOC: Config.digest.rewrite_period | |
4622 | DEFAULT: 1 hour | |
4623 | DOC_START | |
4624 | This is the number of seconds between Cache Digest writes to | |
4625 | disk. | |
4626 | DOC_END | |
4627 | ||
4628 | NAME: digest_swapout_chunk_size | |
4629 | COMMENT: (bytes) | |
4630 | TYPE: b_size_t | |
4631 | IFDEF: USE_CACHE_DIGESTS | |
4632 | LOC: Config.digest.swapout_chunk_size | |
4633 | DEFAULT: 4096 bytes | |
4634 | DOC_START | |
4635 | This is the number of bytes of the Cache Digest to write to | |
4636 | disk at a time. It defaults to 4096 bytes (4KB), the Squid | |
4637 | default swap page. | |
4638 | DOC_END | |
4639 | ||
4640 | NAME: digest_rebuild_chunk_percentage | |
4641 | COMMENT: (percent, 0-100) | |
4642 | IFDEF: USE_CACHE_DIGESTS | |
4643 | TYPE: int | |
4644 | LOC: Config.digest.rebuild_chunk_percentage | |
4645 | DEFAULT: 10 | |
4646 | DOC_START | |
4647 | This is the percentage of the Cache Digest to be scanned at a | |
4648 | time. By default it is set to 10% of the Cache Digest. | |
4649 | DOC_END | |
4650 | ||
4651 | NAME: chroot | |
4652 | TYPE: string | |
4653 | LOC: Config.chroot_dir | |
4654 | DEFAULT: none | |
4655 | DOC_START | |
4656 | Use this to have Squid do a chroot() while initializing. This | |
4657 | also causes Squid to fully drop root privileges after | |
7f7db318 | 4658 | initializing. This means, for example, if you use a HTTP |
cccac0a2 | 4659 | port less than 1024 and try to reconfigure, you will get an |
4660 | error. | |
4661 | DOC_END | |
4662 | ||
4663 | NAME: client_persistent_connections | |
4664 | TYPE: onoff | |
4665 | LOC: Config.onoff.client_pconns | |
4666 | DEFAULT: on | |
4667 | DOC_NONE | |
4668 | ||
4669 | NAME: server_persistent_connections | |
4670 | TYPE: onoff | |
4671 | LOC: Config.onoff.server_pconns | |
4672 | DEFAULT: on | |
4673 | DOC_START | |
4674 | Persistent connection support for clients and servers. By | |
4675 | default, Squid uses persistent connections (when allowed) | |
4676 | with its clients and servers. You can use these options to | |
4677 | disable persistent connections with clients and/or servers. | |
4678 | DOC_END | |
4679 | ||
58850d15 | 4680 | NAME: persistent_connection_after_error |
a12a049a | 4681 | TYPE: onoff |
58850d15 | 4682 | LOC: Config.onoff.error_pconns |
4683 | DEFAULT: off | |
a12a049a | 4684 | DOC_START |
58850d15 | 4685 | With this directive the use of persistent connections after |
4686 | HTTP errors can be disabled. Useful if you have clients | |
4687 | who fail to handle errors on persistent connections proper. | |
a12a049a | 4688 | DOC_END |
4689 | ||
21b92762 | 4690 | NAME: detect_broken_pconn |
4691 | TYPE: onoff | |
4692 | LOC: Config.onoff.detect_broken_server_pconns | |
4693 | DEFAULT: off | |
4694 | DOC_START | |
4695 | Some servers have been found to incorrectly signal the use | |
4696 | of HTTP/1.0 persistent connections even on replies not | |
4697 | compatible, causing significant delays. This server problem | |
4698 | has mostly been seen on redirects. | |
4699 | ||
4700 | By enabling this directive Squid attempts to detect such | |
4701 | broken replies and automatically assume the reply is finished | |
4702 | after 10 seconds timeout. | |
4703 | DOC_END | |
4704 | ||
58850d15 | 4705 | NAME: balance_on_multiple_ip |
4706 | TYPE: onoff | |
4707 | LOC: Config.onoff.balance_on_multiple_ip | |
4708 | DEFAULT: on | |
4709 | DOC_START | |
4710 | Some load balancing servers based on round robin DNS have been | |
4711 | found not to preserve user session state across requests | |
4712 | to different IP addresses. | |
4713 | ||
4714 | By default Squid rotates IP's per request. By disabling | |
4715 | this directive only connection failure triggers rotation. | |
4716 | DOC_END | |
4717 | ||
cccac0a2 | 4718 | NAME: pipeline_prefetch |
4719 | TYPE: onoff | |
4720 | LOC: Config.onoff.pipeline_prefetch | |
4721 | DEFAULT: off | |
4722 | DOC_START | |
4723 | To boost the performance of pipelined requests to closer | |
4724 | match that of a non-proxied environment Squid can try to fetch | |
5ac1a5b3 | 4725 | up to two requests in parallel from a pipeline. |
cccac0a2 | 4726 | |
4727 | Defaults to off for bandwidth management and access logging | |
4728 | reasons. | |
4729 | DOC_END | |
4730 | ||
4731 | NAME: extension_methods | |
4732 | TYPE: wordlist | |
4733 | LOC: Config.ext_methods | |
4734 | DEFAULT: none | |
4735 | DOC_START | |
4736 | Squid only knows about standardized HTTP request methods. | |
4737 | You can add up to 20 additional "extension" methods here. | |
4738 | DOC_END | |
4739 | ||
4740 | NAME: request_entities | |
4741 | TYPE: onoff | |
4742 | LOC: Config.onoff.request_entities | |
4743 | DEFAULT: off | |
4744 | DOC_START | |
4745 | Squid defaults to deny GET and HEAD requests with request entities, | |
4746 | as the meaning of such requests are undefined in the HTTP standard | |
4747 | even if not explicitly forbidden. | |
4748 | ||
4749 | Set this directive to on if you have clients which insists | |
4750 | on sending request entities in GET or HEAD requests. | |
4751 | DOC_END | |
4752 | ||
4753 | NAME: high_response_time_warning | |
4754 | TYPE: int | |
4755 | COMMENT: (msec) | |
4756 | LOC: Config.warnings.high_rptm | |
4757 | DEFAULT: 0 | |
4758 | DOC_START | |
4759 | If the one-minute median response time exceeds this value, | |
4760 | Squid prints a WARNING with debug level 0 to get the | |
4761 | administrators attention. The value is in milliseconds. | |
4762 | DOC_END | |
4763 | ||
4764 | NAME: high_page_fault_warning | |
4765 | TYPE: int | |
4766 | LOC: Config.warnings.high_pf | |
4767 | DEFAULT: 0 | |
4768 | DOC_START | |
4769 | If the one-minute average page fault rate exceeds this | |
4770 | value, Squid prints a WARNING with debug level 0 to get | |
4771 | the administrators attention. The value is in page faults | |
4772 | per second. | |
4773 | DOC_END | |
4774 | ||
4775 | NAME: high_memory_warning | |
4776 | TYPE: b_size_t | |
4777 | LOC: Config.warnings.high_memory | |
4778 | DEFAULT: 0 | |
4779 | DOC_START | |
4780 | If the memory usage (as determined by mallinfo) exceeds | |
4781 | value, Squid prints a WARNING with debug level 0 to get | |
4782 | the administrators attention. | |
4783 | DOC_END | |
4784 | ||
4785 | NAME: store_dir_select_algorithm | |
4786 | TYPE: string | |
4787 | LOC: Config.store_dir_select_algorithm | |
4788 | DEFAULT: least-load | |
4789 | DOC_START | |
4790 | Set this to 'round-robin' as an alternative. | |
4791 | DOC_END | |
4792 | ||
4793 | NAME: forward_log | |
4794 | IFDEF: WIP_FWD_LOG | |
4795 | TYPE: string | |
4796 | DEFAULT: none | |
4797 | LOC: Config.Log.forward | |
4798 | DOC_START | |
4799 | Logs the server-side requests. | |
4800 | ||
4801 | This is currently work in progress. | |
4802 | DOC_END | |
4803 | ||
4804 | NAME: ie_refresh | |
4805 | COMMENT: on|off | |
4806 | TYPE: onoff | |
4807 | LOC: Config.onoff.ie_refresh | |
4808 | DEFAULT: off | |
4809 | DOC_START | |
4810 | Microsoft Internet Explorer up until version 5.5 Service | |
4811 | Pack 1 has an issue with transparent proxies, wherein it | |
4812 | is impossible to force a refresh. Turning this on provides | |
4813 | a partial fix to the problem, by causing all IMS-REFRESH | |
4814 | requests from older IE versions to check the origin server | |
4815 | for fresh content. This reduces hit ratio by some amount | |
4816 | (~10% in my experience), but allows users to actually get | |
7f7db318 | 4817 | fresh content when they want it. Note because Squid |
cccac0a2 | 4818 | cannot tell if the user is using 5.5 or 5.5SP1, the behavior |
4819 | of 5.5 is unchanged from old versions of Squid (i.e. a | |
4820 | forced refresh is impossible). Newer versions of IE will, | |
4821 | hopefully, continue to have the new behavior and will be | |
4822 | handled based on that assumption. This option defaults to | |
4823 | the old Squid behavior, which is better for hit ratios but | |
4824 | worse for clients using IE, if they need to be able to | |
4825 | force fresh content. | |
4826 | DOC_END | |
4827 | ||
4828 | NAME: vary_ignore_expire | |
4829 | COMMENT: on|off | |
4830 | TYPE: onoff | |
4831 | LOC: Config.onoff.vary_ignore_expire | |
4832 | DEFAULT: off | |
4833 | DOC_START | |
4834 | Many HTTP servers supporting Vary gives such objects | |
4835 | immediate expiry time with no cache-control header | |
4836 | when requested by a HTTP/1.0 client. This option | |
4837 | enables Squid to ignore such expiry times until | |
4838 | HTTP/1.1 is fully implemented. | |
4839 | WARNING: This may eventually cause some varying | |
4840 | objects not intended for caching to get cached. | |
4841 | DOC_END | |
4842 | ||
4843 | NAME: sleep_after_fork | |
4844 | COMMENT: (microseconds) | |
4845 | TYPE: int | |
4846 | LOC: Config.sleep_after_fork | |
4847 | DEFAULT: 0 | |
4848 | DOC_START | |
4849 | When this is set to a non-zero value, the main Squid process | |
4850 | sleeps the specified number of microseconds after a fork() | |
4851 | system call. This sleep may help the situation where your | |
4852 | system reports fork() failures due to lack of (virtual) | |
7f7db318 | 4853 | memory. Note, however, if you have a lot of child |
4854 | processes, these sleep delays will add up and your | |
cccac0a2 | 4855 | Squid will not service requests for some amount of time |
4856 | until all the child processes have been started. | |
4857 | DOC_END | |
4858 | ||
6a2f3fcf | 4859 | NAME: minimum_expiry_time |
4860 | COMMENT: (seconds) | |
4861 | TYPE: time_t | |
4862 | LOC: Config.minimum_expiry_time | |
4863 | DEFAULT: 60 seconds | |
4864 | DOC_START | |
6845f129 | 4865 | The minimum caching time according to (Expires - Date) |
4866 | Headers Squid honors if the object can't be revalidated | |
4867 | defaults to 60 seconds. In reverse proxy enorinments it | |
4868 | might be desirable to honor shorter object lifetimes. It | |
4869 | is most likely better to make your server return a | |
4870 | meaningful Last-Modified header however. In ESI environments | |
4c43e44e | 4871 | where page fragments often have short lifetimes, this will |
4872 | often be best set to 0. | |
6a2f3fcf | 4873 | DOC_END |
4874 | ||
df6fd596 | 4875 | NAME: relaxed_header_parser |
4876 | COMMENT: on|off|warn | |
4877 | TYPE: tristate | |
4878 | LOC: Config.onoff.relaxed_header_parser | |
4879 | DEFAULT: on | |
4880 | DOC_START | |
4881 | In the default "on" setting Squid accepts certain forms | |
4882 | of non-compliant HTTP messages where it is unambiguous | |
4883 | what the sending application intended even if the message | |
4884 | is not correctly formatted. The messages is then normalized | |
4885 | to the correct form when forwarded by Squid. | |
4886 | ||
4887 | If set to "warn" then a warning will be emitted in cache.log | |
4888 | each time such HTTP error is encountered. | |
4889 | ||
4890 | If set to "off" then such HTTP errors will cause the request | |
4891 | or response to be rejected. | |
4892 | DOC_END | |
4893 | ||
a58ff010 | 4894 | COMMENT_START |
4895 | ICAP OPTIONS | |
4896 | ----------------------------------------------------------------------------- | |
4897 | COMMENT_END | |
4898 | ||
4899 | NAME: icap_enable | |
4900 | TYPE: onoff | |
4901 | IFDEF: ICAP_CLIENT | |
4902 | COMMENT: on|off | |
4903 | LOC: TheICAPConfig.onoff | |
4904 | DEFAULT: off | |
4905 | DOC_START | |
4906 | If you want to enable the ICAP module support, set this to on. | |
4907 | DOC_END | |
4908 | ||
4909 | NAME: icap_preview_enable | |
4910 | TYPE: onoff | |
4911 | IFDEF: ICAP_CLIENT | |
4912 | COMMENT: on|off | |
4913 | LOC: TheICAPConfig.preview_enable | |
4914 | DEFAULT: off | |
4915 | DOC_START | |
4916 | Set this to 'on' if you want to enable the ICAP preview | |
4917 | feature in Squid. | |
4918 | DOC_END | |
4919 | ||
4920 | NAME: icap_preview_size | |
4921 | TYPE: int | |
4922 | IFDEF: ICAP_CLIENT | |
4923 | LOC: TheICAPConfig.preview_size | |
4924 | DEFAULT: -1 | |
4925 | DOC_START | |
4926 | The default size of preview data to be sent to the ICAP server. | |
4927 | -1 means no preview. This value might be overwritten on a per server | |
4928 | basis by OPTIONS requests. | |
4929 | DOC_END | |
4930 | ||
78e8cfc4 | 4931 | NAME: icap_default_options_ttl |
4932 | TYPE: int | |
4933 | IFDEF: ICAP_CLIENT | |
4934 | LOC: TheICAPConfig.default_options_ttl | |
4935 | DEFAULT: 60 | |
4936 | DOC_START | |
4937 | The default TTL value for ICAP OPTIONS responses that don't have | |
4938 | an Options-TTL header. | |
4939 | DOC_END | |
4940 | ||
12b91c99 | 4941 | NAME: icap_persistent_connections |
4942 | TYPE: onoff | |
4943 | IFDEF: ICAP_CLIENT | |
4944 | COMMENT: on|off | |
4945 | LOC: TheICAPConfig.reuse_connections | |
4946 | DEFAULT: on | |
4947 | DOC_START | |
4948 | Whether or not Squid should use persistent connections to | |
4949 | an ICAP server. | |
4950 | DOC_END | |
4951 | ||
a58ff010 | 4952 | NAME: icap_send_client_ip |
4953 | TYPE: onoff | |
4954 | IFDEF: ICAP_CLIENT | |
4955 | COMMENT: on|off | |
4956 | LOC: TheICAPConfig.send_client_ip | |
4957 | DEFAULT: off | |
4958 | DOC_START | |
4959 | This adds the header "X-Client-IP" to ICAP requests. | |
4960 | DOC_END | |
4961 | ||
12b91c99 | 4962 | NAME: icap_send_client_username |
a58ff010 | 4963 | TYPE: onoff |
4964 | IFDEF: ICAP_CLIENT | |
4965 | COMMENT: on|off | |
12b91c99 | 4966 | LOC: TheICAPConfig.send_client_username |
a58ff010 | 4967 | DEFAULT: off |
4968 | DOC_START | |
12b91c99 | 4969 | This adds the header "X-Client-Username" to ICAP requests |
a58ff010 | 4970 | if proxy access is authentified. |
4971 | DOC_END | |
4972 | ||
a58ff010 | 4973 | NAME: icap_service |
4974 | TYPE: icap_service_type | |
4975 | IFDEF: ICAP_CLIENT | |
4976 | LOC: TheICAPConfig | |
4977 | DEFAULT: none | |
4978 | DOC_START | |
4979 | Defines a single ICAP service | |
4980 | ||
4981 | icap_service servicename vectoring_point bypass service_url | |
4982 | ||
4983 | vectoring_point = reqmod_precache|reqmod_postcache|respmod_precache|respmod_postcache | |
4984 | This specifies at which point of request processing the ICAP | |
4985 | service should be plugged in. | |
4986 | bypass = 1|0 | |
4987 | If set to 1 and the ICAP server cannot be reached, the request will go | |
4988 | through without being processed by an ICAP server | |
4989 | service_url = icap://servername:port/service | |
4990 | ||
4991 | Note: reqmod_precache and respmod_postcache is not yet implemented | |
4992 | ||
4993 | Example: | |
4994 | icap_service service_1 reqmod_precache 0 icap://icap1.mydomain.net:1344/reqmod | |
4995 | icap_service service_2 respmod_precache 0 icap://icap2.mydomain.net:1344/respmod | |
4996 | DOC_END | |
4997 | ||
4998 | NAME: icap_class | |
4999 | TYPE: icap_class_type | |
5000 | IFDEF: ICAP_CLIENT | |
5001 | LOC: TheICAPConfig | |
5002 | DEFAULT: none | |
5003 | DOC_START | |
5004 | Defines an ICAP service chain. If there are multiple services per | |
5005 | vectoring point, they are processed in the specified order. | |
5006 | ||
5007 | icap_class classname servicename... | |
5008 | ||
5009 | Example: | |
5010 | icap_class class_1 service_1 service_2 | |
5011 | icap class class_2 service_1 service_3 | |
5012 | DOC_END | |
5013 | ||
5014 | NAME: icap_access | |
5015 | TYPE: icap_access_type | |
5016 | IFDEF: ICAP_CLIENT | |
5017 | LOC: TheICAPConfig | |
5018 | DEFAULT: none | |
5019 | DOC_START | |
5020 | Redirects a request through an ICAP service class, depending | |
5021 | on given acls | |
5022 | ||
5023 | icap_access classname allow|deny [!]aclname... | |
5024 | ||
5025 | The icap_access statements are processed in the order they appear in | |
5026 | this configuration file. If an access list matches, the processing stops. | |
5027 | For an "allow" rule, the specified class is used for the request. A "deny" | |
5028 | rule simply stops processing without using the class. You can also use the | |
5029 | special classname "None". | |
5030 | ||
5031 | For backward compatibility, it is also possible to use services | |
5032 | directly here. | |
5033 | Example: | |
5034 | icap_access class_1 allow all | |
5035 | DOC_END | |
5036 | ||
cccac0a2 | 5037 | EOF |