]> git.ipfire.org Git - thirdparty/hostap.git/blame - src/common/wpa_ctrl.h
tests: Add room for more vendor elems in wpas_ctrl_vendor_elem
[thirdparty/hostap.git] / src / common / wpa_ctrl.h
CommitLineData
6fc6879b
JM
1/*
2 * wpa_supplicant/hostapd control interface library
3 * Copyright (c) 2004-2006, Jouni Malinen <j@w1.fi>
4 *
0f3d578e
JM
5 * This software may be distributed under the terms of the BSD license.
6 * See README for more details.
6fc6879b
JM
7 */
8
9#ifndef WPA_CTRL_H
10#define WPA_CTRL_H
11
12#ifdef __cplusplus
13extern "C" {
14#endif
15
16/* wpa_supplicant control interface - fixed message prefixes */
17
18/** Interactive request for identity/password/pin */
19#define WPA_CTRL_REQ "CTRL-REQ-"
20
21/** Response to identity/password/pin request */
22#define WPA_CTRL_RSP "CTRL-RSP-"
23
24/* Event messages with fixed prefix */
25/** Authentication completed successfully and data connection enabled */
26#define WPA_EVENT_CONNECTED "CTRL-EVENT-CONNECTED "
27/** Disconnected, data connection is not available */
28#define WPA_EVENT_DISCONNECTED "CTRL-EVENT-DISCONNECTED "
ea78c315
JM
29/** Association rejected during connection attempt */
30#define WPA_EVENT_ASSOC_REJECT "CTRL-EVENT-ASSOC-REJECT "
6fc6879b
JM
31/** wpa_supplicant is exiting */
32#define WPA_EVENT_TERMINATING "CTRL-EVENT-TERMINATING "
33/** Password change was completed successfully */
34#define WPA_EVENT_PASSWORD_CHANGED "CTRL-EVENT-PASSWORD-CHANGED "
35/** EAP-Request/Notification received */
36#define WPA_EVENT_EAP_NOTIFICATION "CTRL-EVENT-EAP-NOTIFICATION "
37/** EAP authentication started (EAP-Request/Identity received) */
38#define WPA_EVENT_EAP_STARTED "CTRL-EVENT-EAP-STARTED "
7796f20e
JM
39/** EAP method proposed by the server */
40#define WPA_EVENT_EAP_PROPOSED_METHOD "CTRL-EVENT-EAP-PROPOSED-METHOD "
6fc6879b
JM
41/** EAP method selected */
42#define WPA_EVENT_EAP_METHOD "CTRL-EVENT-EAP-METHOD "
00468b46
JM
43/** EAP peer certificate from TLS */
44#define WPA_EVENT_EAP_PEER_CERT "CTRL-EVENT-EAP-PEER-CERT "
45/** EAP TLS certificate chain validation error */
46#define WPA_EVENT_EAP_TLS_CERT_ERROR "CTRL-EVENT-EAP-TLS-CERT-ERROR "
c7a39ba4
CH
47/** EAP status */
48#define WPA_EVENT_EAP_STATUS "CTRL-EVENT-EAP-STATUS "
6fc6879b
JM
49/** EAP authentication completed successfully */
50#define WPA_EVENT_EAP_SUCCESS "CTRL-EVENT-EAP-SUCCESS "
51/** EAP authentication failed (EAP-Failure received) */
52#define WPA_EVENT_EAP_FAILURE "CTRL-EVENT-EAP-FAILURE "
00e5e3d5
JM
53/** Network block temporarily disabled (e.g., due to authentication failure) */
54#define WPA_EVENT_TEMP_DISABLED "CTRL-EVENT-SSID-TEMP-DISABLED "
55/** Temporarily disabled network block re-enabled */
56#define WPA_EVENT_REENABLED "CTRL-EVENT-SSID-REENABLED "
a5f40eff
JM
57/** New scan started */
58#define WPA_EVENT_SCAN_STARTED "CTRL-EVENT-SCAN-STARTED "
6fc6879b
JM
59/** New scan results available */
60#define WPA_EVENT_SCAN_RESULTS "CTRL-EVENT-SCAN-RESULTS "
d1079219
DS
61/** Scan command failed */
62#define WPA_EVENT_SCAN_FAILED "CTRL-EVENT-SCAN-FAILED "
4e2ead7a
DS
63/** wpa_supplicant state change */
64#define WPA_EVENT_STATE_CHANGE "CTRL-EVENT-STATE-CHANGE "
b590812e 65/** A new BSS entry was added (followed by BSS entry id and BSSID) */
f0d126d3 66#define WPA_EVENT_BSS_ADDED "CTRL-EVENT-BSS-ADDED "
b590812e 67/** A BSS entry was removed (followed by BSS entry id and BSSID) */
f0d126d3 68#define WPA_EVENT_BSS_REMOVED "CTRL-EVENT-BSS-REMOVED "
0cd86028
JM
69/** Change in the signal level was reported by the driver */
70#define WPA_EVENT_SIGNAL_CHANGE "CTRL-EVENT-SIGNAL-CHANGE "
142817b2
JM
71/** Regulatory domain channel */
72#define WPA_EVENT_REGDOM_CHANGE "CTRL-EVENT-REGDOM-CHANGE "
6fc6879b 73
e743db43
JM
74/** RSN IBSS 4-way handshakes completed with specified peer */
75#define IBSS_RSN_COMPLETED "IBSS-RSN-COMPLETED "
76
8567866d
JJ
77/** Notification of frequency conflict due to a concurrent operation.
78 *
79 * The indicated network is disabled and needs to be re-enabled before it can
80 * be used again.
81 */
82#define WPA_EVENT_FREQ_CONFLICT "CTRL-EVENT-FREQ-CONFLICT "
253f2e37
AH
83/** Frequency ranges that the driver recommends to avoid */
84#define WPA_EVENT_AVOID_FREQ "CTRL-EVENT-AVOID-FREQ "
a524f05e 85/** WPS overlap detected in PBC mode */
ad08c363 86#define WPS_EVENT_OVERLAP "WPS-OVERLAP-DETECTED "
a524f05e
JM
87/** Available WPS AP with active PBC found in scan results */
88#define WPS_EVENT_AP_AVAILABLE_PBC "WPS-AP-AVAILABLE-PBC "
31fcea93
JM
89/** Available WPS AP with our address as authorized in scan results */
90#define WPS_EVENT_AP_AVAILABLE_AUTH "WPS-AP-AVAILABLE-AUTH "
a524f05e
JM
91/** Available WPS AP with recently selected PIN registrar found in scan results
92 */
93#define WPS_EVENT_AP_AVAILABLE_PIN "WPS-AP-AVAILABLE-PIN "
94/** Available WPS AP found in scan results */
95#define WPS_EVENT_AP_AVAILABLE "WPS-AP-AVAILABLE "
ff8a53a8
JM
96/** A new credential received */
97#define WPS_EVENT_CRED_RECEIVED "WPS-CRED-RECEIVED "
4b68290e
JM
98/** M2D received */
99#define WPS_EVENT_M2D "WPS-M2D "
469fc3a4
JM
100/** WPS registration failed after M2/M2D */
101#define WPS_EVENT_FAIL "WPS-FAIL "
ad5302a1
JM
102/** WPS registration completed successfully */
103#define WPS_EVENT_SUCCESS "WPS-SUCCESS "
a6099152
JM
104/** WPS enrollment attempt timed out and was terminated */
105#define WPS_EVENT_TIMEOUT "WPS-TIMEOUT "
50396e29
JM
106/* PBC mode was activated */
107#define WPS_EVENT_ACTIVE "WPS-PBC-ACTIVE "
108/* PBC mode was disabled */
109#define WPS_EVENT_DISABLE "WPS-PBC-DISABLE "
ad08c363 110
c2f51269
JM
111#define WPS_EVENT_ENROLLEE_SEEN "WPS-ENROLLEE-SEEN "
112
f981eabc
JM
113#define WPS_EVENT_OPEN_NETWORK "WPS-OPEN-NETWORK "
114
b78bc3a3
JM
115/* WPS ER events */
116#define WPS_EVENT_ER_AP_ADD "WPS-ER-AP-ADD "
117#define WPS_EVENT_ER_AP_REMOVE "WPS-ER-AP-REMOVE "
118#define WPS_EVENT_ER_ENROLLEE_ADD "WPS-ER-ENROLLEE-ADD "
119#define WPS_EVENT_ER_ENROLLEE_REMOVE "WPS-ER-ENROLLEE-REMOVE "
15dbf129 120#define WPS_EVENT_ER_AP_SETTINGS "WPS-ER-AP-SETTINGS "
3e7533b3 121#define WPS_EVENT_ER_SET_SEL_REG "WPS-ER-AP-SET-SEL-REG "
b78bc3a3 122
5f92659d 123/* MESH events */
603a3f34
JL
124#define MESH_GROUP_STARTED "MESH-GROUP-STARTED "
125#define MESH_GROUP_REMOVED "MESH-GROUP-REMOVED "
5f92659d
BC
126#define MESH_PEER_CONNECTED "MESH-PEER-CONNECTED "
127#define MESH_PEER_DISCONNECTED "MESH-PEER-DISCONNECTED "
128
d1f88001
MB
129/* WMM AC events */
130#define WMM_AC_EVENT_TSPEC_ADDED "TSPEC-ADDED "
131#define WMM_AC_EVENT_TSPEC_REMOVED "TSPEC-REMOVED "
132#define WMM_AC_EVENT_TSPEC_REQ_FAILED "TSPEC-REQ-FAILED "
133
b22128ef
JM
134/** P2P device found */
135#define P2P_EVENT_DEVICE_FOUND "P2P-DEVICE-FOUND "
3074d8f1
JJ
136
137/** P2P device lost */
138#define P2P_EVENT_DEVICE_LOST "P2P-DEVICE-LOST "
139
b22128ef
JM
140/** A P2P device requested GO negotiation, but we were not ready to start the
141 * negotiation */
142#define P2P_EVENT_GO_NEG_REQUEST "P2P-GO-NEG-REQUEST "
143#define P2P_EVENT_GO_NEG_SUCCESS "P2P-GO-NEG-SUCCESS "
144#define P2P_EVENT_GO_NEG_FAILURE "P2P-GO-NEG-FAILURE "
145#define P2P_EVENT_GROUP_FORMATION_SUCCESS "P2P-GROUP-FORMATION-SUCCESS "
146#define P2P_EVENT_GROUP_FORMATION_FAILURE "P2P-GROUP-FORMATION-FAILURE "
147#define P2P_EVENT_GROUP_STARTED "P2P-GROUP-STARTED "
148#define P2P_EVENT_GROUP_REMOVED "P2P-GROUP-REMOVED "
72044390
JM
149#define P2P_EVENT_CROSS_CONNECT_ENABLE "P2P-CROSS-CONNECT-ENABLE "
150#define P2P_EVENT_CROSS_CONNECT_DISABLE "P2P-CROSS-CONNECT-DISABLE "
b22128ef
JM
151/* parameters: <peer address> <PIN> */
152#define P2P_EVENT_PROV_DISC_SHOW_PIN "P2P-PROV-DISC-SHOW-PIN "
153/* parameters: <peer address> */
154#define P2P_EVENT_PROV_DISC_ENTER_PIN "P2P-PROV-DISC-ENTER-PIN "
155/* parameters: <peer address> */
156#define P2P_EVENT_PROV_DISC_PBC_REQ "P2P-PROV-DISC-PBC-REQ "
157/* parameters: <peer address> */
158#define P2P_EVENT_PROV_DISC_PBC_RESP "P2P-PROV-DISC-PBC-RESP "
f65a239b
DG
159/* parameters: <peer address> <status> */
160#define P2P_EVENT_PROV_DISC_FAILURE "P2P-PROV-DISC-FAILURE"
b22128ef
JM
161/* parameters: <freq> <src addr> <dialog token> <update indicator> <TLVs> */
162#define P2P_EVENT_SERV_DISC_REQ "P2P-SERV-DISC-REQ "
163/* parameters: <src addr> <update indicator> <TLVs> */
164#define P2P_EVENT_SERV_DISC_RESP "P2P-SERV-DISC-RESP "
165#define P2P_EVENT_INVITATION_RECEIVED "P2P-INVITATION-RECEIVED "
166#define P2P_EVENT_INVITATION_RESULT "P2P-INVITATION-RESULT "
8aebb0e4 167#define P2P_EVENT_FIND_STOPPED "P2P-FIND-STOPPED "
5bf9a6c8 168#define P2P_EVENT_PERSISTENT_PSK_FAIL "P2P-PERSISTENT-PSK-FAIL id="
c64e3a08 169#define P2P_EVENT_PRESENCE_RESPONSE "P2P-PRESENCE-RESPONSE "
74df9ecd 170#define P2P_EVENT_NFC_BOTH_GO "P2P-NFC-BOTH-GO "
59b45d1a
JM
171#define P2P_EVENT_NFC_PEER_CLIENT "P2P-NFC-PEER-CLIENT "
172#define P2P_EVENT_NFC_WHILE_CLIENT "P2P-NFC-WHILE-CLIENT "
b22128ef 173
ae8535b6
JM
174/* parameters: <PMF enabled> <timeout in ms> <Session Information URL> */
175#define ESS_DISASSOC_IMMINENT "ESS-DISASSOC-IMMINENT "
253f2e37 176#define P2P_EVENT_REMOVE_AND_REFORM_GROUP "P2P-REMOVE-AND-REFORM-GROUP "
ae8535b6 177
b02fe7ff 178#define INTERWORKING_AP "INTERWORKING-AP "
28f2a7c4 179#define INTERWORKING_BLACKLISTED "INTERWORKING-BLACKLISTED "
b02fe7ff 180#define INTERWORKING_NO_MATCH "INTERWORKING-NO-MATCH "
d28f4e44 181#define INTERWORKING_ALREADY_CONNECTED "INTERWORKING-ALREADY-CONNECTED "
76a55a8e 182#define INTERWORKING_SELECTED "INTERWORKING-SELECTED "
b02fe7ff 183
1619e9d5
JM
184/* Credential block added; parameters: <id> */
185#define CRED_ADDED "CRED-ADDED "
186/* Credential block modified; parameters: <id> <field> */
187#define CRED_MODIFIED "CRED-MODIFIED "
188/* Credential block removed; parameters: <id> */
189#define CRED_REMOVED "CRED-REMOVED "
190
b1f12296 191#define GAS_RESPONSE_INFO "GAS-RESPONSE-INFO "
6ffa1687
JM
192/* parameters: <addr> <dialog_token> <freq> */
193#define GAS_QUERY_START "GAS-QUERY-START "
194/* parameters: <addr> <dialog_token> <freq> <status_code> <result> */
195#define GAS_QUERY_DONE "GAS-QUERY-DONE "
b1f12296 196
95a3ea94 197#define HS20_SUBSCRIPTION_REMEDIATION "HS20-SUBSCRIPTION-REMEDIATION "
7ef69479 198#define HS20_DEAUTH_IMMINENT_NOTICE "HS20-DEAUTH-IMMINENT-NOTICE "
95a3ea94 199
1f965e62
JM
200#define EXT_RADIO_WORK_START "EXT-RADIO-WORK-START "
201#define EXT_RADIO_WORK_TIMEOUT "EXT-RADIO-WORK-TIMEOUT "
202
f4b8bfae
AK
203#define RRM_EVENT_NEIGHBOR_REP_RXED "RRM-NEIGHBOR-REP-RECEIVED "
204#define RRM_EVENT_NEIGHBOR_REP_FAILED "RRM-NEIGHBOR-REP-REQUEST-FAILED "
205
ad08c363
JM
206/* hostapd control interface - fixed message prefixes */
207#define WPS_EVENT_PIN_NEEDED "WPS-PIN-NEEDED "
208#define WPS_EVENT_NEW_AP_SETTINGS "WPS-NEW-AP-SETTINGS "
aabe26a1 209#define WPS_EVENT_REG_SUCCESS "WPS-REG-SUCCESS "
3b2cf800 210#define WPS_EVENT_AP_SETUP_LOCKED "WPS-AP-SETUP-LOCKED "
94481410 211#define WPS_EVENT_AP_SETUP_UNLOCKED "WPS-AP-SETUP-UNLOCKED "
5a1cc30f
JM
212#define WPS_EVENT_AP_PIN_ENABLED "WPS-AP-PIN-ENABLED "
213#define WPS_EVENT_AP_PIN_DISABLED "WPS-AP-PIN-DISABLED "
20bd9547
JM
214#define AP_STA_CONNECTED "AP-STA-CONNECTED "
215#define AP_STA_DISCONNECTED "AP-STA-DISCONNECTED "
ad08c363 216
3140803b
RM
217#define AP_REJECTED_MAX_STA "AP-REJECTED-MAX-STA "
218#define AP_REJECTED_BLOCKED_STA "AP-REJECTED-BLOCKED-STA "
6fc6879b 219
7d6d7370
JM
220#define AP_EVENT_ENABLED "AP-ENABLED "
221#define AP_EVENT_DISABLED "AP-DISABLED "
222
ab93fdeb
JM
223#define INTERFACE_ENABLED "INTERFACE-ENABLED "
224#define INTERFACE_DISABLED "INTERFACE-DISABLED "
225
ae134e1d
JM
226#define ACS_EVENT_STARTED "ACS-STARTED "
227#define ACS_EVENT_COMPLETED "ACS-COMPLETED "
228#define ACS_EVENT_FAILED "ACS-FAILED "
229
186c9059
JM
230#define DFS_EVENT_RADAR_DETECTED "DFS-RADAR-DETECTED "
231#define DFS_EVENT_NEW_CHANNEL "DFS-NEW-CHANNEL "
232#define DFS_EVENT_CAC_START "DFS-CAC-START "
233#define DFS_EVENT_CAC_COMPLETED "DFS-CAC-COMPLETED "
234#define DFS_EVENT_NOP_FINISHED "DFS-NOP-FINISHED "
235
bf281c12
AO
236#define AP_CSA_FINISHED "AP-CSA-FINISHED "
237
53514800
JM
238/* BSS Transition Management Response frame received */
239#define BSS_TM_RESP "BSS-TM-RESP "
240
5f97dd1c
DS
241/* BSS command information masks */
242
c6673429 243#define WPA_BSS_MASK_ALL 0xFFFDFFFF
5f97dd1c
DS
244#define WPA_BSS_MASK_ID BIT(0)
245#define WPA_BSS_MASK_BSSID BIT(1)
246#define WPA_BSS_MASK_FREQ BIT(2)
247#define WPA_BSS_MASK_BEACON_INT BIT(3)
248#define WPA_BSS_MASK_CAPABILITIES BIT(4)
249#define WPA_BSS_MASK_QUAL BIT(5)
250#define WPA_BSS_MASK_NOISE BIT(6)
251#define WPA_BSS_MASK_LEVEL BIT(7)
252#define WPA_BSS_MASK_TSF BIT(8)
253#define WPA_BSS_MASK_AGE BIT(9)
254#define WPA_BSS_MASK_IE BIT(10)
255#define WPA_BSS_MASK_FLAGS BIT(11)
256#define WPA_BSS_MASK_SSID BIT(12)
257#define WPA_BSS_MASK_WPS_SCAN BIT(13)
258#define WPA_BSS_MASK_P2P_SCAN BIT(14)
259#define WPA_BSS_MASK_INTERNETW BIT(15)
337c781f 260#define WPA_BSS_MASK_WIFI_DISPLAY BIT(16)
c6673429 261#define WPA_BSS_MASK_DELIM BIT(17)
79070906 262#define WPA_BSS_MASK_MESH_SCAN BIT(18)
5f97dd1c
DS
263
264
86bd36f0
JM
265/* VENDOR_ELEM_* frame id values */
266enum wpa_vendor_elem_frame {
267 VENDOR_ELEM_PROBE_REQ_P2P = 0,
268 VENDOR_ELEM_PROBE_RESP_P2P = 1,
269 VENDOR_ELEM_PROBE_RESP_P2P_GO = 2,
270 VENDOR_ELEM_BEACON_P2P_GO = 3,
271 VENDOR_ELEM_P2P_PD_REQ = 4,
272 VENDOR_ELEM_P2P_PD_RESP = 5,
273 VENDOR_ELEM_P2P_GO_NEG_REQ = 6,
274 VENDOR_ELEM_P2P_GO_NEG_RESP = 7,
275 VENDOR_ELEM_P2P_GO_NEG_CONF = 8,
276 VENDOR_ELEM_P2P_INV_REQ = 9,
277 VENDOR_ELEM_P2P_INV_RESP = 10,
278 VENDOR_ELEM_P2P_ASSOC_REQ = 11,
279 VENDOR_ELEM_P2P_ASSOC_RESP = 12,
280 NUM_VENDOR_ELEM_FRAMES
281};
282
283
6fc6879b
JM
284/* wpa_supplicant/hostapd control interface access */
285
286/**
287 * wpa_ctrl_open - Open a control interface to wpa_supplicant/hostapd
288 * @ctrl_path: Path for UNIX domain sockets; ignored if UDP sockets are used.
289 * Returns: Pointer to abstract control interface data or %NULL on failure
290 *
291 * This function is used to open a control interface to wpa_supplicant/hostapd.
292 * ctrl_path is usually /var/run/wpa_supplicant or /var/run/hostapd. This path
293 * is configured in wpa_supplicant/hostapd and other programs using the control
294 * interface need to use matching path configuration.
295 */
296struct wpa_ctrl * wpa_ctrl_open(const char *ctrl_path);
297
298
299/**
300 * wpa_ctrl_close - Close a control interface to wpa_supplicant/hostapd
301 * @ctrl: Control interface data from wpa_ctrl_open()
302 *
303 * This function is used to close a control interface.
304 */
305void wpa_ctrl_close(struct wpa_ctrl *ctrl);
306
307
308/**
309 * wpa_ctrl_request - Send a command to wpa_supplicant/hostapd
310 * @ctrl: Control interface data from wpa_ctrl_open()
311 * @cmd: Command; usually, ASCII text, e.g., "PING"
312 * @cmd_len: Length of the cmd in bytes
313 * @reply: Buffer for the response
314 * @reply_len: Reply buffer length
315 * @msg_cb: Callback function for unsolicited messages or %NULL if not used
316 * Returns: 0 on success, -1 on error (send or receive failed), -2 on timeout
317 *
318 * This function is used to send commands to wpa_supplicant/hostapd. Received
319 * response will be written to reply and reply_len is set to the actual length
320 * of the reply. This function will block for up to two seconds while waiting
321 * for the reply. If unsolicited messages are received, the blocking time may
322 * be longer.
323 *
324 * msg_cb can be used to register a callback function that will be called for
325 * unsolicited messages received while waiting for the command response. These
326 * messages may be received if wpa_ctrl_request() is called at the same time as
327 * wpa_supplicant/hostapd is sending such a message. This can happen only if
328 * the program has used wpa_ctrl_attach() to register itself as a monitor for
329 * event messages. Alternatively to msg_cb, programs can register two control
330 * interface connections and use one of them for commands and the other one for
331 * receiving event messages, in other words, call wpa_ctrl_attach() only for
332 * the control interface connection that will be used for event messages.
333 */
334int wpa_ctrl_request(struct wpa_ctrl *ctrl, const char *cmd, size_t cmd_len,
335 char *reply, size_t *reply_len,
336 void (*msg_cb)(char *msg, size_t len));
337
338
339/**
340 * wpa_ctrl_attach - Register as an event monitor for the control interface
341 * @ctrl: Control interface data from wpa_ctrl_open()
342 * Returns: 0 on success, -1 on failure, -2 on timeout
343 *
344 * This function registers the control interface connection as a monitor for
345 * wpa_supplicant/hostapd events. After a success wpa_ctrl_attach() call, the
346 * control interface connection starts receiving event messages that can be
347 * read with wpa_ctrl_recv().
348 */
349int wpa_ctrl_attach(struct wpa_ctrl *ctrl);
350
351
352/**
353 * wpa_ctrl_detach - Unregister event monitor from the control interface
354 * @ctrl: Control interface data from wpa_ctrl_open()
355 * Returns: 0 on success, -1 on failure, -2 on timeout
356 *
357 * This function unregisters the control interface connection as a monitor for
358 * wpa_supplicant/hostapd events, i.e., cancels the registration done with
359 * wpa_ctrl_attach().
360 */
361int wpa_ctrl_detach(struct wpa_ctrl *ctrl);
362
363
364/**
365 * wpa_ctrl_recv - Receive a pending control interface message
366 * @ctrl: Control interface data from wpa_ctrl_open()
367 * @reply: Buffer for the message data
368 * @reply_len: Length of the reply buffer
369 * Returns: 0 on success, -1 on failure
370 *
43f02e6a
JM
371 * This function will receive a pending control interface message. The received
372 * response will be written to reply and reply_len is set to the actual length
373 * of the reply.
374
6fc6879b
JM
375 * wpa_ctrl_recv() is only used for event messages, i.e., wpa_ctrl_attach()
376 * must have been used to register the control interface as an event monitor.
377 */
378int wpa_ctrl_recv(struct wpa_ctrl *ctrl, char *reply, size_t *reply_len);
379
380
381/**
382 * wpa_ctrl_pending - Check whether there are pending event messages
383 * @ctrl: Control interface data from wpa_ctrl_open()
384 * Returns: 1 if there are pending messages, 0 if no, or -1 on error
385 *
386 * This function will check whether there are any pending control interface
387 * message available to be received with wpa_ctrl_recv(). wpa_ctrl_pending() is
388 * only used for event messages, i.e., wpa_ctrl_attach() must have been used to
389 * register the control interface as an event monitor.
390 */
391int wpa_ctrl_pending(struct wpa_ctrl *ctrl);
392
393
394/**
395 * wpa_ctrl_get_fd - Get file descriptor used by the control interface
396 * @ctrl: Control interface data from wpa_ctrl_open()
397 * Returns: File descriptor used for the connection
398 *
399 * This function can be used to get the file descriptor that is used for the
400 * control interface connection. The returned value can be used, e.g., with
401 * select() while waiting for multiple events.
402 *
403 * The returned file descriptor must not be used directly for sending or
404 * receiving packets; instead, the library functions wpa_ctrl_request() and
405 * wpa_ctrl_recv() must be used for this.
406 */
407int wpa_ctrl_get_fd(struct wpa_ctrl *ctrl);
408
ed3eecd7
DS
409#ifdef ANDROID
410/**
411 * wpa_ctrl_cleanup() - Delete any local UNIX domain socket files that
412 * may be left over from clients that were previously connected to
413 * wpa_supplicant. This keeps these files from being orphaned in the
414 * event of crashes that prevented them from being removed as part
415 * of the normal orderly shutdown.
416 */
417void wpa_ctrl_cleanup(void);
418#endif /* ANDROID */
419
6fc6879b 420#ifdef CONFIG_CTRL_IFACE_UDP
afadf423 421/* Port range for multiple wpa_supplicant instances and multiple VIFs */
6fc6879b 422#define WPA_CTRL_IFACE_PORT 9877
afadf423 423#define WPA_CTRL_IFACE_PORT_LIMIT 50 /* decremented from start */
6fc6879b 424#define WPA_GLOBAL_CTRL_IFACE_PORT 9878
afadf423 425#define WPA_GLOBAL_CTRL_IFACE_PORT_LIMIT 20 /* incremented from start */
3cea004d
TG
426
427char * wpa_ctrl_get_remote_ifname(struct wpa_ctrl *ctrl);
6fc6879b
JM
428#endif /* CONFIG_CTRL_IFACE_UDP */
429
430
431#ifdef __cplusplus
432}
433#endif
434
435#endif /* WPA_CTRL_H */