clone: allow "--bare" with "-o"

[thirdparty/git.git] / t / t0021 / rot13-filter.pl

#
# Example implementation for the Git filter protocol version 2
# See Documentation/gitattributes.txt, section "Filter Protocol"
#
# Usage: rot13-filter.pl [--always-delay] <log path> <capabilities>
#
# Log path defines a debug log file that the script writes to. The
# subsequent arguments define a list of supported protocol capabilities
# ("clean", "smudge", etc).
#
# When --always-delay is given all pathnames with the "can-delay" flag
# that don't appear on the list bellow are delayed with a count of 1
# (see more below).
#
# This implementation supports special test cases:
# (1) If data with the pathname "clean-write-fail.r" is processed with
#     a "clean" operation then the write operation will die.
# (2) If data with the pathname "smudge-write-fail.r" is processed with
#     a "smudge" operation then the write operation will die.
# (3) If data with the pathname "error.r" is processed with any
#     operation then the filter signals that it cannot or does not want
#     to process the file.
# (4) If data with the pathname "abort.r" is processed with any
#     operation then the filter signals that it cannot or does not want
#     to process the file and any file after that is processed with the
#     same command.
# (5) If data with a pathname that is a key in the DELAY hash is
#     requested (e.g. "test-delay10.a") then the filter responds with
#     a "delay" status and sets the "requested" field in the DELAY hash.
#     The filter will signal the availability of this object after
#     "count" (field in DELAY hash) "list_available_blobs" commands.
# (6) If data with the pathname "missing-delay.a" is processed that the
#     filter will drop the path from the "list_available_blobs" response.
# (7) If data with the pathname "invalid-delay.a" is processed that the
#     filter will add the path "unfiltered" which was not delayed before
#     to the "list_available_blobs" response.
#

use 5.008;
sub gitperllib {
	# Git assumes that all path lists are Unix-y colon-separated ones. But
	# when the Git for Windows executes the test suite, its MSYS2 Bash
	# calls git.exe, and colon-separated path lists are converted into
	# Windows-y semicolon-separated lists of *Windows* paths (which
	# naturally contain a colon after the drive letter, so splitting by
	# colons simply does not cut it).
	#
	# Detect semicolon-separated path list and handle them appropriately.

	if ($ENV{GITPERLLIB} =~ /;/) {
		return split(/;/, $ENV{GITPERLLIB});
	}
	return split(/:/, $ENV{GITPERLLIB});
}
use lib (gitperllib());
use strict;
use warnings;
use IO::File;
use Git::Packet;

my $MAX_PACKET_CONTENT_SIZE = 65516;

my $always_delay = 0;
if ( $ARGV[0] eq '--always-delay' ) {
	$always_delay = 1;
	shift @ARGV;
}

my $log_file                = shift @ARGV;
my @capabilities            = @ARGV;

open my $debug, ">>", $log_file or die "cannot open log file: $!";

my %DELAY = (
	'test-delay10.a' => { "requested" => 0, "count" => 1 },
	'test-delay11.a' => { "requested" => 0, "count" => 1 },
	'test-delay20.a' => { "requested" => 0, "count" => 2 },
	'test-delay10.b' => { "requested" => 0, "count" => 1 },
	'missing-delay.a' => { "requested" => 0, "count" => 1 },
	'invalid-delay.a' => { "requested" => 0, "count" => 1 },
);

sub rot13 {
	my $str = shift;
	$str =~ y/A-Za-z/N-ZA-Mn-za-m/;
	return $str;
}

print $debug "START\n";
$debug->flush();

packet_initialize("git-filter", 2);

my %remote_caps = packet_read_and_check_capabilities("clean", "smudge", "delay");
packet_check_and_write_capabilities(\%remote_caps, @capabilities);

print $debug "init handshake complete\n";
$debug->flush();

while (1) {
	my ( $res, $command ) = packet_key_val_read("command");
	if ( $res == -1 ) {
		print $debug "STOP\n";
		exit();
	}
	print $debug "IN: $command";
	$debug->flush();

	if ( $command eq "list_available_blobs" ) {
		# Flush
		packet_compare_lists([1, ""], packet_bin_read()) ||
			die "bad list_available_blobs end";

		foreach my $pathname ( sort keys %DELAY ) {
			if ( $DELAY{$pathname}{"requested"} >= 1 ) {
				$DELAY{$pathname}{"count"} = $DELAY{$pathname}{"count"} - 1;
				if ( $pathname eq "invalid-delay.a" ) {
					# Send Git a pathname that was not delayed earlier
					packet_txt_write("pathname=unfiltered");
				}
				if ( $pathname eq "missing-delay.a" ) {
					# Do not signal Git that this file is available
				} elsif ( $DELAY{$pathname}{"count"} == 0 ) {
					print $debug " $pathname";
					packet_txt_write("pathname=$pathname");
				}
			}
		}

		packet_flush();

		print $debug " [OK]\n";
		$debug->flush();
		packet_txt_write("status=success");
		packet_flush();
	} else {
		my ( $res, $pathname ) = packet_key_val_read("pathname");
		if ( $res == -1 ) {
			die "unexpected EOF while expecting pathname";
		}
		print $debug " $pathname";
		$debug->flush();

		# Read until flush
		my ( $done, $buffer ) = packet_txt_read();
		while ( $buffer ne '' ) {
			if ( $buffer eq "can-delay=1" ) {
				if ( exists $DELAY{$pathname} and $DELAY{$pathname}{"requested"} == 0 ) {
					$DELAY{$pathname}{"requested"} = 1;
				} elsif ( !exists $DELAY{$pathname} and $always_delay ) {
					$DELAY{$pathname} = { "requested" => 1, "count" => 1 };
				}
			} elsif ($buffer =~ /^(ref|treeish|blob)=/) {
				print $debug " $buffer";
			} else {
				# In general, filters need to be graceful about
				# new metadata, since it's documented that we
				# can pass any key-value pairs, but for tests,
				# let's be a little stricter.
				die "Unknown message '$buffer'";
			}

			( $done, $buffer ) = packet_txt_read();
		}
		if ( $done == -1 ) {
			die "unexpected EOF after pathname '$pathname'";
		}

		my $input = "";
		{
			binmode(STDIN);
			my $buffer;
			my $done = 0;
			while ( !$done ) {
				( $done, $buffer ) = packet_bin_read();
				$input .= $buffer;
			}
			if ( $done == -1 ) {
				die "unexpected EOF while reading input for '$pathname'";
			}			
			print $debug " " . length($input) . " [OK] -- ";
			$debug->flush();
		}

		my $output;
		if ( exists $DELAY{$pathname} and exists $DELAY{$pathname}{"output"} ) {
			$output = $DELAY{$pathname}{"output"}
		} elsif ( $pathname eq "error.r" or $pathname eq "abort.r" ) {
			$output = "";
		} elsif ( $command eq "clean" and grep( /^clean$/, @capabilities ) ) {
			$output = rot13($input);
		} elsif ( $command eq "smudge" and grep( /^smudge$/, @capabilities ) ) {
			$output = rot13($input);
		} else {
			die "bad command '$command'";
		}

		if ( $pathname eq "error.r" ) {
			print $debug "[ERROR]\n";
			$debug->flush();
			packet_txt_write("status=error");
			packet_flush();
		} elsif ( $pathname eq "abort.r" ) {
			print $debug "[ABORT]\n";
			$debug->flush();
			packet_txt_write("status=abort");
			packet_flush();
		} elsif ( $command eq "smudge" and
			exists $DELAY{$pathname} and
			$DELAY{$pathname}{"requested"} == 1 ) {
			print $debug "[DELAYED]\n";
			$debug->flush();
			packet_txt_write("status=delayed");
			packet_flush();
			$DELAY{$pathname}{"requested"} = 2;
			$DELAY{$pathname}{"output"} = $output;
		} else {
			packet_txt_write("status=success");
			packet_flush();

			if ( $pathname eq "${command}-write-fail.r" ) {
				print $debug "[WRITE FAIL]\n";
				$debug->flush();
				die "${command} write error";
			}

			print $debug "OUT: " . length($output) . " ";
			$debug->flush();

			while ( length($output) > 0 ) {
				my $packet = substr( $output, 0, $MAX_PACKET_CONTENT_SIZE );
				packet_bin_write($packet);
				# dots represent the number of packets
				print $debug ".";
				if ( length($output) > $MAX_PACKET_CONTENT_SIZE ) {
					$output = substr( $output, $MAX_PACKET_CONTENT_SIZE );
				} else {
					$output = "";
				}
			}
			packet_flush();
			print $debug " [OK]\n";
			$debug->flush();
			packet_flush();
		}
	}
}