]>
Commit | Line | Data |
---|---|---|
1 | #!/bin/bash | |
2 | # Tool mainly for U-Boot Quality Assurance: build one or more board | |
3 | # configurations with minimal verbosity, showing only warnings and | |
4 | # errors. | |
5 | # | |
6 | # SPDX-License-Identifier: GPL-2.0+ | |
7 | ||
8 | usage() | |
9 | { | |
10 | # if exiting with 0, write to stdout, else write to stderr | |
11 | local ret=${1:-0} | |
12 | [ "${ret}" -eq 1 ] && exec 1>&2 | |
13 | cat <<-EOF | |
14 | Usage: MAKEALL [options] [--] [boards-to-build] | |
15 | ||
16 | Options: | |
17 | -a ARCH, --arch ARCH Build all boards with arch ARCH | |
18 | -c CPU, --cpu CPU Build all boards with cpu CPU | |
19 | -v VENDOR, --vendor VENDOR Build all boards with vendor VENDOR | |
20 | -s SOC, --soc SOC Build all boards with soc SOC | |
21 | -b BOARD, --board BOARD Build all boards with board name BOARD | |
22 | -l, --list List all targets to be built | |
23 | -m, --maintainers List all targets and maintainer email | |
24 | -M, --mails List all targets and all affilated emails | |
25 | -C, --check Enable build checking | |
26 | -n, --continue Continue (skip boards already built) | |
27 | -r, --rebuild-errors Rebuild any boards that errored | |
28 | -h, --help This help output | |
29 | ||
30 | Selections by these options are logically ANDed; if the same option | |
31 | is used repeatedly, such selections are ORed. So "-v FOO -v BAR" | |
32 | will select all configurations where the vendor is either FOO or | |
33 | BAR. Any additional arguments specified on the command line are | |
34 | always build additionally. See the boards.cfg file for more info. | |
35 | ||
36 | If no boards are specified, then the default is "powerpc". | |
37 | ||
38 | Environment variables: | |
39 | BUILD_NCPUS number of parallel make jobs (default: auto) | |
40 | CROSS_COMPILE cross-compiler toolchain prefix (default: "") | |
41 | CROSS_COMPILE_<ARCH> cross-compiler toolchain prefix for | |
42 | architecture "ARCH". Substitute "ARCH" for any | |
43 | supported architecture (default: "") | |
44 | MAKEALL_LOGDIR output all logs to here (default: ./LOG/) | |
45 | BUILD_DIR output build directory (default: ./) | |
46 | BUILD_NBUILDS number of parallel targets (default: 1) | |
47 | ||
48 | Examples: | |
49 | - build all Power Architecture boards: | |
50 | MAKEALL -a powerpc | |
51 | MAKEALL --arch powerpc | |
52 | MAKEALL powerpc | |
53 | - build all PowerPC boards manufactured by vendor "esd": | |
54 | MAKEALL -a powerpc -v esd | |
55 | - build all PowerPC boards manufactured either by "keymile" or "siemens": | |
56 | MAKEALL -a powerpc -v keymile -v siemens | |
57 | - build all Freescale boards with MPC83xx CPUs, plus all 4xx boards: | |
58 | MAKEALL -c mpc83xx -v freescale 4xx | |
59 | EOF | |
60 | exit ${ret} | |
61 | } | |
62 | ||
63 | SHORT_OPTS="ha:c:v:s:b:lmMCnr" | |
64 | LONG_OPTS="help,arch:,cpu:,vendor:,soc:,board:,list,maintainers,mails,check,continue,rebuild-errors" | |
65 | ||
66 | # Option processing based on util-linux-2.13/getopt-parse.bash | |
67 | ||
68 | # Note that we use `"$@"' to let each command-line parameter expand to a | |
69 | # separate word. The quotes around `$@' are essential! | |
70 | # We need TEMP as the `eval set --' would nuke the return value of | |
71 | # getopt. | |
72 | TEMP=`getopt -o ${SHORT_OPTS} --long ${LONG_OPTS} \ | |
73 | -n 'MAKEALL' -- "$@"` | |
74 | ||
75 | [ $? != 0 ] && usage 1 | |
76 | ||
77 | # Note the quotes around `$TEMP': they are essential! | |
78 | eval set -- "$TEMP" | |
79 | ||
80 | SELECTED='' | |
81 | ONLY_LIST='' | |
82 | PRINT_MAINTS='' | |
83 | MAINTAINERS_ONLY='' | |
84 | CONTINUE='' | |
85 | REBUILD_ERRORS='' | |
86 | ||
87 | while true ; do | |
88 | case "$1" in | |
89 | -a|--arch) | |
90 | # echo "Option ARCH: argument \`$2'" | |
91 | if [ "$opt_a" ] ; then | |
92 | opt_a="${opt_a%)} || \$2 == \"$2\")" | |
93 | else | |
94 | opt_a="(\$2 == \"$2\")" | |
95 | fi | |
96 | SELECTED='y' | |
97 | shift 2 ;; | |
98 | -c|--cpu) | |
99 | # echo "Option CPU: argument \`$2'" | |
100 | if [ "$opt_c" ] ; then | |
101 | opt_c="${opt_c%)} || \$3 == \"$2\" || \$3 ~ /$2:/)" | |
102 | else | |
103 | opt_c="(\$3 == \"$2\" || \$3 ~ /$2:/)" | |
104 | fi | |
105 | SELECTED='y' | |
106 | shift 2 ;; | |
107 | -s|--soc) | |
108 | # echo "Option SoC: argument \`$2'" | |
109 | if [ "$opt_s" ] ; then | |
110 | opt_s="${opt_s%)} || \$4 == \"$2\" || \$4 ~ /$2/)" | |
111 | else | |
112 | opt_s="(\$4 == \"$2\" || \$4 ~ /$2/)" | |
113 | fi | |
114 | SELECTED='y' | |
115 | shift 2 ;; | |
116 | -v|--vendor) | |
117 | # echo "Option VENDOR: argument \`$2'" | |
118 | if [ "$opt_v" ] ; then | |
119 | opt_v="${opt_v%)} || \$5 == \"$2\")" | |
120 | else | |
121 | opt_v="(\$5 == \"$2\")" | |
122 | fi | |
123 | SELECTED='y' | |
124 | shift 2 ;; | |
125 | -b|--board) | |
126 | # echo "Option BOARD: argument \`$2'" | |
127 | if [ "$opt_b" ] ; then | |
128 | opt_b="${opt_b%)} || \$6 == \"$2\" || \$7 == \"$2\")" | |
129 | else | |
130 | # We need to check the 7th field too | |
131 | # for boards whose 6th field is "-" | |
132 | opt_b="(\$6 == \"$2\" || \$7 == \"$2\")" | |
133 | fi | |
134 | SELECTED='y' | |
135 | shift 2 ;; | |
136 | -C|--check) | |
137 | CHECK='C=1' | |
138 | shift ;; | |
139 | -n|--continue) | |
140 | CONTINUE='y' | |
141 | shift ;; | |
142 | -r|--rebuild-errors) | |
143 | REBUILD_ERRORS='y' | |
144 | shift ;; | |
145 | -l|--list) | |
146 | ONLY_LIST='y' | |
147 | shift ;; | |
148 | -m|--maintainers) | |
149 | ONLY_LIST='y' | |
150 | PRINT_MAINTS='y' | |
151 | MAINTAINERS_ONLY='y' | |
152 | shift ;; | |
153 | -M|--mails) | |
154 | ONLY_LIST='y' | |
155 | PRINT_MAINTS='y' | |
156 | shift ;; | |
157 | -h|--help) | |
158 | usage ;; | |
159 | --) | |
160 | shift ; break ;; | |
161 | *) | |
162 | echo "Internal error!" >&2 ; exit 1 ;; | |
163 | esac | |
164 | done | |
165 | # echo "Remaining arguments:" | |
166 | # for arg do echo '--> '"\`$arg'" ; done | |
167 | ||
168 | FILTER="\$1 !~ /^#/" | |
169 | [ "$opt_a" ] && FILTER="${FILTER} && $opt_a" | |
170 | [ "$opt_c" ] && FILTER="${FILTER} && $opt_c" | |
171 | [ "$opt_s" ] && FILTER="${FILTER} && $opt_s" | |
172 | [ "$opt_v" ] && FILTER="${FILTER} && $opt_v" | |
173 | [ "$opt_b" ] && FILTER="${FILTER} && $opt_b" | |
174 | ||
175 | if [ "$SELECTED" ] ; then | |
176 | SELECTED=$(awk '('"$FILTER"') { print $7 }' boards.cfg) | |
177 | ||
178 | # Make sure some boards from boards.cfg are actually found | |
179 | if [ -z "$SELECTED" ] ; then | |
180 | echo "Error: No boards selected, invalid arguments" | |
181 | exit 1 | |
182 | fi | |
183 | fi | |
184 | ||
185 | ######################################################################### | |
186 | ||
187 | # Print statistics when we exit | |
188 | trap exit 1 2 3 15 | |
189 | trap print_stats 0 | |
190 | ||
191 | # Determine number of CPU cores if no default was set | |
192 | : ${BUILD_NCPUS:="`getconf _NPROCESSORS_ONLN`"} | |
193 | ||
194 | if [ "$BUILD_NCPUS" -gt 1 ] | |
195 | then | |
196 | JOBS="-j $((BUILD_NCPUS + 1))" | |
197 | else | |
198 | JOBS="" | |
199 | fi | |
200 | ||
201 | if [ "${MAKEALL_LOGDIR}" ] ; then | |
202 | LOG_DIR=${MAKEALL_LOGDIR} | |
203 | else | |
204 | LOG_DIR="LOG" | |
205 | fi | |
206 | ||
207 | : ${BUILD_NBUILDS:=1} | |
208 | BUILD_MANY=0 | |
209 | ||
210 | if [ "${BUILD_NBUILDS}" -gt 1 ] ; then | |
211 | BUILD_MANY=1 | |
212 | : ${BUILD_DIR:=./build} | |
213 | mkdir -p "${BUILD_DIR}/ERR" | |
214 | find "${BUILD_DIR}/ERR/" -type f -exec rm -f {} + | |
215 | fi | |
216 | ||
217 | : ${BUILD_DIR:=.} | |
218 | ||
219 | OUTPUT_PREFIX="${BUILD_DIR}" | |
220 | ||
221 | [ -d ${LOG_DIR} ] || mkdir "${LOG_DIR}" || exit 1 | |
222 | if [ "$CONTINUE" != 'y' -a "$REBUILD_ERRORS" != 'y' ] ; then | |
223 | find "${LOG_DIR}/" -type f -exec rm -f {} + | |
224 | fi | |
225 | ||
226 | LIST="" | |
227 | ||
228 | # Keep track of the number of builds and errors | |
229 | ERR_CNT=0 | |
230 | ERR_LIST="" | |
231 | WRN_CNT=0 | |
232 | WRN_LIST="" | |
233 | TOTAL_CNT=0 | |
234 | SKIP_CNT=0 | |
235 | CURRENT_CNT=0 | |
236 | OLDEST_IDX=1 | |
237 | RC=0 | |
238 | ||
239 | # Helper funcs for parsing boards.cfg | |
240 | targets_by_field() | |
241 | { | |
242 | field=$1 | |
243 | regexp=$2 | |
244 | ||
245 | awk '($1 !~ /^#/ && $'"$field"' ~ /^'"$regexp"'$/) { print $7 }' \ | |
246 | boards.cfg | |
247 | } | |
248 | ||
249 | targets_by_arch() { targets_by_field 2 "$@" ; } | |
250 | targets_by_cpu() { targets_by_field 3 "$@" ; targets_by_field 3 "$@:.*" ; } | |
251 | targets_by_soc() { targets_by_field 4 "$@" ; } | |
252 | ||
253 | ######################################################################### | |
254 | ## MPC5xx Systems | |
255 | ######################################################################### | |
256 | ||
257 | LIST_5xx="$(targets_by_cpu mpc5xx)" | |
258 | ||
259 | ######################################################################### | |
260 | ## MPC5xxx Systems | |
261 | ######################################################################### | |
262 | ||
263 | LIST_5xxx="$(targets_by_cpu mpc5xxx)" | |
264 | ||
265 | ######################################################################### | |
266 | ## MPC512x Systems | |
267 | ######################################################################### | |
268 | ||
269 | LIST_512x="$(targets_by_cpu mpc512x)" | |
270 | ||
271 | ######################################################################### | |
272 | ## MPC8xx Systems | |
273 | ######################################################################### | |
274 | ||
275 | LIST_8xx="$(targets_by_cpu mpc8xx)" | |
276 | ||
277 | ######################################################################### | |
278 | ## PPC4xx Systems | |
279 | ######################################################################### | |
280 | ||
281 | LIST_4xx="$(targets_by_cpu ppc4xx)" | |
282 | ||
283 | ######################################################################### | |
284 | ## MPC824x Systems | |
285 | ######################################################################### | |
286 | ||
287 | LIST_824x="$(targets_by_cpu mpc824x)" | |
288 | ||
289 | ######################################################################### | |
290 | ## MPC8260 Systems (includes 8250, 8255 etc.) | |
291 | ######################################################################### | |
292 | ||
293 | LIST_8260="$(targets_by_cpu mpc8260)" | |
294 | ||
295 | ######################################################################### | |
296 | ## MPC83xx Systems (includes 8349, etc.) | |
297 | ######################################################################### | |
298 | ||
299 | LIST_83xx="$(targets_by_cpu mpc83xx)" | |
300 | ||
301 | ######################################################################### | |
302 | ## MPC85xx Systems (includes 8540, 8560 etc.) | |
303 | ######################################################################### | |
304 | ||
305 | LIST_85xx="$(targets_by_cpu mpc85xx)" | |
306 | ||
307 | ######################################################################### | |
308 | ## MPC86xx Systems | |
309 | ######################################################################### | |
310 | ||
311 | LIST_86xx="$(targets_by_cpu mpc86xx)" | |
312 | ||
313 | ######################################################################### | |
314 | ## 74xx/7xx Systems | |
315 | ######################################################################### | |
316 | ||
317 | LIST_74xx_7xx="$(targets_by_cpu 74xx_7xx)" | |
318 | ||
319 | ######################################################################### | |
320 | ## PowerPC groups | |
321 | ######################################################################### | |
322 | ||
323 | LIST_TSEC=" \ | |
324 | ${LIST_83xx} \ | |
325 | ${LIST_85xx} \ | |
326 | ${LIST_86xx} \ | |
327 | " | |
328 | ||
329 | LIST_powerpc=" \ | |
330 | ${LIST_5xx} \ | |
331 | ${LIST_512x} \ | |
332 | ${LIST_5xxx} \ | |
333 | ${LIST_8xx} \ | |
334 | ${LIST_824x} \ | |
335 | ${LIST_8260} \ | |
336 | ${LIST_83xx} \ | |
337 | ${LIST_85xx} \ | |
338 | ${LIST_86xx} \ | |
339 | ${LIST_4xx} \ | |
340 | ${LIST_74xx_7xx}\ | |
341 | " | |
342 | ||
343 | # Alias "ppc" -> "powerpc" to not break compatibility with older scripts | |
344 | # still using "ppc" instead of "powerpc" | |
345 | LIST_ppc=" \ | |
346 | ${LIST_powerpc} \ | |
347 | " | |
348 | ||
349 | ######################################################################### | |
350 | ## StrongARM Systems | |
351 | ######################################################################### | |
352 | ||
353 | LIST_SA="$(targets_by_cpu sa1100)" | |
354 | ||
355 | ######################################################################### | |
356 | ## ARM7 Systems | |
357 | ######################################################################### | |
358 | ||
359 | LIST_ARM7="$(targets_by_cpu arm720t)" | |
360 | ||
361 | ######################################################################### | |
362 | ## ARM9 Systems | |
363 | ######################################################################### | |
364 | ||
365 | LIST_ARM9="$(targets_by_cpu arm920t) \ | |
366 | $(targets_by_cpu arm926ejs) \ | |
367 | $(targets_by_cpu arm946es) \ | |
368 | " | |
369 | ||
370 | ######################################################################### | |
371 | ## ARM11 Systems | |
372 | ######################################################################### | |
373 | LIST_ARM11="$(targets_by_cpu arm1136) \ | |
374 | $(targets_by_cpu arm1176) \ | |
375 | " | |
376 | ||
377 | ######################################################################### | |
378 | ## ARMV7 Systems | |
379 | ######################################################################### | |
380 | ||
381 | LIST_ARMV7="$(targets_by_cpu armv7)" | |
382 | ||
383 | ######################################################################### | |
384 | ## AT91 Systems | |
385 | ######################################################################### | |
386 | ||
387 | LIST_at91="$(targets_by_soc at91)" | |
388 | ||
389 | ######################################################################### | |
390 | ## Xscale Systems | |
391 | ######################################################################### | |
392 | ||
393 | LIST_pxa="$(targets_by_cpu pxa)" | |
394 | ||
395 | LIST_ixp="$(targets_by_cpu ixp)" | |
396 | ||
397 | ######################################################################### | |
398 | ## SPEAr Systems | |
399 | ######################################################################### | |
400 | ||
401 | LIST_spear="$(targets_by_soc spear)" | |
402 | ||
403 | ######################################################################### | |
404 | ## ARM groups | |
405 | ######################################################################### | |
406 | ||
407 | LIST_arm="$(targets_by_arch arm)" | |
408 | ||
409 | ######################################################################### | |
410 | ## MIPS Systems (default = big endian) | |
411 | ######################################################################### | |
412 | ||
413 | LIST_mips4kc=" \ | |
414 | incaip \ | |
415 | incaip_100MHz \ | |
416 | incaip_133MHz \ | |
417 | incaip_150MHz \ | |
418 | qemu_mips \ | |
419 | vct_platinum \ | |
420 | vct_platinum_small \ | |
421 | vct_platinum_onenand \ | |
422 | vct_platinum_onenand_small \ | |
423 | vct_platinumavc \ | |
424 | vct_platinumavc_small \ | |
425 | vct_platinumavc_onenand \ | |
426 | vct_platinumavc_onenand_small \ | |
427 | vct_premium \ | |
428 | vct_premium_small \ | |
429 | vct_premium_onenand \ | |
430 | vct_premium_onenand_small \ | |
431 | " | |
432 | ||
433 | LIST_au1xx0=" \ | |
434 | dbau1000 \ | |
435 | dbau1100 \ | |
436 | dbau1500 \ | |
437 | dbau1550 \ | |
438 | " | |
439 | ||
440 | LIST_mips=" \ | |
441 | ${LIST_mips4kc} \ | |
442 | ${LIST_mips5kc} \ | |
443 | ${LIST_au1xx0} \ | |
444 | " | |
445 | ||
446 | ######################################################################### | |
447 | ## MIPS Systems (little endian) | |
448 | ######################################################################### | |
449 | ||
450 | LIST_au1xx0_el=" \ | |
451 | dbau1550_el \ | |
452 | pb1000 \ | |
453 | " | |
454 | LIST_mips_el=" \ | |
455 | ${LIST_au1xx0_el} \ | |
456 | " | |
457 | ######################################################################### | |
458 | ## OpenRISC Systems | |
459 | ######################################################################### | |
460 | ||
461 | LIST_openrisc="$(targets_by_arch openrisc)" | |
462 | ||
463 | ######################################################################### | |
464 | ## x86 Systems | |
465 | ######################################################################### | |
466 | ||
467 | LIST_x86="$(targets_by_arch x86)" | |
468 | ||
469 | ######################################################################### | |
470 | ## Nios-II Systems | |
471 | ######################################################################### | |
472 | ||
473 | LIST_nios2="$(targets_by_arch nios2)" | |
474 | ||
475 | ######################################################################### | |
476 | ## MicroBlaze Systems | |
477 | ######################################################################### | |
478 | ||
479 | LIST_microblaze="$(targets_by_arch microblaze)" | |
480 | ||
481 | ######################################################################### | |
482 | ## ColdFire Systems | |
483 | ######################################################################### | |
484 | ||
485 | LIST_m68k="$(targets_by_arch m68k)" | |
486 | LIST_coldfire=${LIST_m68k} | |
487 | ||
488 | ######################################################################### | |
489 | ## AVR32 Systems | |
490 | ######################################################################### | |
491 | ||
492 | LIST_avr32="$(targets_by_arch avr32)" | |
493 | ||
494 | ######################################################################### | |
495 | ## Blackfin Systems | |
496 | ######################################################################### | |
497 | ||
498 | LIST_blackfin="$(targets_by_arch blackfin)" | |
499 | ||
500 | ######################################################################### | |
501 | ## SH Systems | |
502 | ######################################################################### | |
503 | ||
504 | LIST_sh2="$(targets_by_cpu sh2)" | |
505 | LIST_sh3="$(targets_by_cpu sh3)" | |
506 | LIST_sh4="$(targets_by_cpu sh4)" | |
507 | ||
508 | LIST_sh="$(targets_by_arch sh)" | |
509 | ||
510 | ######################################################################### | |
511 | ## SPARC Systems | |
512 | ######################################################################### | |
513 | ||
514 | LIST_sparc="$(targets_by_arch sparc)" | |
515 | ||
516 | ######################################################################### | |
517 | ## NDS32 Systems | |
518 | ######################################################################### | |
519 | ||
520 | LIST_nds32="$(targets_by_arch nds32)" | |
521 | ||
522 | #----------------------------------------------------------------------- | |
523 | ||
524 | get_target_location() { | |
525 | local target=$1 | |
526 | local BOARD_NAME="" | |
527 | local CONFIG_NAME="" | |
528 | local board="" | |
529 | local vendor="" | |
530 | ||
531 | # Automatic mode | |
532 | local line=`awk '\$7 == "'"$target"'" { print \$0 }' boards.cfg` | |
533 | if [ -z "${line}" ] ; then echo "" ; return ; fi | |
534 | ||
535 | set ${line} | |
536 | ||
537 | CONFIG_NAME="${7%_config}" | |
538 | ||
539 | [ "${BOARD_NAME}" ] || BOARD_NAME="${7%_config}" | |
540 | ||
541 | if [ $# -gt 5 ]; then | |
542 | if [ "$6" = "-" ] ; then | |
543 | board=${BOARD_NAME} | |
544 | else | |
545 | board="$6" | |
546 | fi | |
547 | fi | |
548 | ||
549 | [ $# -gt 4 ] && [ "$5" != "-" ] && vendor="$5" | |
550 | [ $# -gt 6 ] && [ "$8" != "-" ] && { | |
551 | tmp="${8%:*}" | |
552 | if [ "$tmp" ] ; then | |
553 | CONFIG_NAME="$tmp" | |
554 | fi | |
555 | } | |
556 | ||
557 | # Assign board directory to BOARDIR variable | |
558 | if [ "${vendor}" == "-" ] ; then | |
559 | BOARDDIR=${board} | |
560 | else | |
561 | BOARDDIR=${vendor}/${board} | |
562 | fi | |
563 | ||
564 | echo "${CONFIG_NAME}:${BOARDDIR}:${BOARD_NAME}" | |
565 | } | |
566 | ||
567 | get_target_maintainers() { | |
568 | local name=`echo $1 | cut -d : -f 3` | |
569 | ||
570 | local line=`awk '\$7 == "'"$target"'" { print \$0 }' boards.cfg` | |
571 | if [ -z "${line}" ]; then | |
572 | echo "" | |
573 | return ; | |
574 | fi | |
575 | ||
576 | local mails=`echo ${line} | cut -d ' ' -f 9- | sed -e 's/[^<]*<//' -e 's/>.*</ /' -e 's/>[^>]*$//'` | |
577 | [ "$mails" == "-" ] && mails="" | |
578 | echo "$mails" | |
579 | } | |
580 | ||
581 | get_target_arch() { | |
582 | local target=$1 | |
583 | ||
584 | # Automatic mode | |
585 | local line=`awk '\$7 == "'"$target"'" { print \$0 }' boards.cfg` | |
586 | ||
587 | if [ -z "${line}" ] ; then echo "" ; return ; fi | |
588 | ||
589 | set ${line} | |
590 | echo "$2" | |
591 | } | |
592 | ||
593 | list_target() { | |
594 | if [ "$PRINT_MAINTS" != 'y' ] ; then | |
595 | echo "$1" | |
596 | return | |
597 | fi | |
598 | ||
599 | echo -n "$1:" | |
600 | ||
601 | local loc=`get_target_location $1` | |
602 | ||
603 | if [ -z "${loc}" ] ; then echo "ERROR" ; return ; fi | |
604 | ||
605 | local maintainers_result=`get_target_maintainers ${loc} | tr " " "\n"` | |
606 | ||
607 | if [ "$MAINTAINERS_ONLY" != 'y' ] ; then | |
608 | ||
609 | local dir=`echo ${loc} | cut -d ":" -f 2` | |
610 | local cfg=`echo ${loc} | cut -d ":" -f 1` | |
611 | local git_result=`git log --format=%aE board/${dir} \ | |
612 | include/configs/${cfg}.h | grep "@"` | |
613 | local git_result_recent=`echo ${git_result} | tr " " "\n" | \ | |
614 | head -n 3` | |
615 | local git_result_top=`echo ${git_result} | tr " " "\n" | \ | |
616 | sort | uniq -c | sort -nr | head -n 3 | \ | |
617 | sed "s/^ \+[0-9]\+ \+//"` | |
618 | ||
619 | echo -e "$git_result_recent\n$git_result_top\n$maintainers_result" | \ | |
620 | sort -u | tr "\n" " " | sed "s/ $//" ; | |
621 | else | |
622 | echo -e "$maintainers_result" | sort -u | tr "\n" " " | \ | |
623 | sed "s/ $//" ; | |
624 | fi | |
625 | ||
626 | echo "" | |
627 | } | |
628 | ||
629 | # Each finished build will have a file called ${donep}${n}, | |
630 | # where n is the index of the build. Each build | |
631 | # we've already noted as finished will have ${skipp}${n}. | |
632 | # The code managing the build process will use this information | |
633 | # to ensure that only BUILD_NBUILDS builds are in flight at once | |
634 | donep="${LOG_DIR}/._done_" | |
635 | skipp="${LOG_DIR}/._skip_" | |
636 | ||
637 | build_target_killed() { | |
638 | echo "Aborted $target build." | |
639 | # Remove the logs for this board since it was aborted | |
640 | rm -f ${LOG_DIR}/$target.MAKELOG ${LOG_DIR}/$target.ERR | |
641 | exit | |
642 | } | |
643 | ||
644 | build_target() { | |
645 | target=$1 | |
646 | build_idx=$2 | |
647 | ||
648 | if [ "$ONLY_LIST" == 'y' ] ; then | |
649 | list_target ${target} | |
650 | return | |
651 | fi | |
652 | ||
653 | if [ $BUILD_MANY == 1 ] ; then | |
654 | output_dir="${OUTPUT_PREFIX}/${target}" | |
655 | mkdir -p "${output_dir}" | |
656 | trap build_target_killed TERM | |
657 | else | |
658 | output_dir="${OUTPUT_PREFIX}" | |
659 | fi | |
660 | ||
661 | export BUILD_DIR="${output_dir}" | |
662 | ||
663 | target_arch=$(get_target_arch ${target}) | |
664 | eval cross_toolchain=\$CROSS_COMPILE_`echo $target_arch | tr '[:lower:]' '[:upper:]'` | |
665 | if [ "${cross_toolchain}" ] ; then | |
666 | MAKE="make CROSS_COMPILE=${cross_toolchain}" | |
667 | elif [ "${CROSS_COMPILE}" ] ; then | |
668 | MAKE="make CROSS_COMPILE=${CROSS_COMPILE}" | |
669 | else | |
670 | MAKE=make | |
671 | fi | |
672 | ||
673 | ${MAKE} distclean >/dev/null | |
674 | ${MAKE} -s ${target}_config | |
675 | ||
676 | ${MAKE} ${JOBS} ${CHECK} all \ | |
677 | >${LOG_DIR}/$target.MAKELOG 2> ${LOG_DIR}/$target.ERR | |
678 | ||
679 | # Check for 'make' errors | |
680 | if [ ${PIPESTATUS[0]} -ne 0 ] ; then | |
681 | RC=1 | |
682 | fi | |
683 | ||
684 | if [ $BUILD_MANY == 1 ] ; then | |
685 | trap - TERM | |
686 | ||
687 | ${MAKE} -s tidy | |
688 | ||
689 | if [ -s ${LOG_DIR}/${target}.ERR ] ; then | |
690 | cp ${LOG_DIR}/${target}.ERR ${OUTPUT_PREFIX}/ERR/${target} | |
691 | else | |
692 | rm ${LOG_DIR}/${target}.ERR | |
693 | fi | |
694 | else | |
695 | if [ -s ${LOG_DIR}/${target}.ERR ] ; then | |
696 | if grep -iw error ${LOG_DIR}/${target}.ERR ; then | |
697 | : $(( ERR_CNT += 1 )) | |
698 | ERR_LIST="${ERR_LIST} $target" | |
699 | else | |
700 | : $(( WRN_CNT += 1 )) | |
701 | WRN_LIST="${WRN_LIST} $target" | |
702 | fi | |
703 | else | |
704 | rm ${LOG_DIR}/${target}.ERR | |
705 | fi | |
706 | fi | |
707 | ||
708 | OBJS=${output_dir}/u-boot | |
709 | if [ -e ${output_dir}/spl/u-boot-spl ]; then | |
710 | OBJS="${OBJS} ${output_dir}/spl/u-boot-spl" | |
711 | fi | |
712 | ||
713 | ${CROSS_COMPILE}size ${OBJS} | tee -a ${LOG_DIR}/$target.MAKELOG | |
714 | ||
715 | [ -e "${LOG_DIR}/${target}.ERR" ] && cat "${LOG_DIR}/${target}.ERR" | |
716 | ||
717 | touch "${donep}${build_idx}" | |
718 | } | |
719 | ||
720 | manage_builds() { | |
721 | search_idx=${OLDEST_IDX} | |
722 | if [ "$ONLY_LIST" == 'y' ] ; then return ; fi | |
723 | ||
724 | while true; do | |
725 | if [ -e "${donep}${search_idx}" ] ; then | |
726 | : $(( CURRENT_CNT-- )) | |
727 | [ ${OLDEST_IDX} -eq ${search_idx} ] && | |
728 | : $(( OLDEST_IDX++ )) | |
729 | ||
730 | # Only want to count it once | |
731 | rm -f "${donep}${search_idx}" | |
732 | touch "${skipp}${search_idx}" | |
733 | elif [ -e "${skipp}${search_idx}" ] ; then | |
734 | [ ${OLDEST_IDX} -eq ${search_idx} ] && | |
735 | : $(( OLDEST_IDX++ )) | |
736 | fi | |
737 | : $(( search_idx++ )) | |
738 | if [ ${search_idx} -gt ${TOTAL_CNT} ] ; then | |
739 | if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then | |
740 | search_idx=${OLDEST_IDX} | |
741 | sleep 1 | |
742 | else | |
743 | break | |
744 | fi | |
745 | fi | |
746 | done | |
747 | } | |
748 | ||
749 | build_targets() { | |
750 | for t in "$@" ; do | |
751 | # If a LIST_xxx var exists, use it. But avoid variable | |
752 | # expansion in the eval when a board name contains certain | |
753 | # characters that the shell interprets. | |
754 | case ${t} in | |
755 | *[-+=]*) list= ;; | |
756 | *) list=$(eval echo '${LIST_'$t'}') ;; | |
757 | esac | |
758 | if [ -n "${list}" ] ; then | |
759 | build_targets ${list} | |
760 | else | |
761 | : $((TOTAL_CNT += 1)) | |
762 | : $((CURRENT_CNT += 1)) | |
763 | rm -f "${donep}${TOTAL_CNT}" | |
764 | rm -f "${skipp}${TOTAL_CNT}" | |
765 | if [ "$CONTINUE" = 'y' -a -e ${LOG_DIR}/$t.MAKELOG ] ; then | |
766 | : $((SKIP_CNT += 1)) | |
767 | touch "${donep}${TOTAL_CNT}" | |
768 | elif [ "$REBUILD_ERRORS" = 'y' -a ! -e ${LOG_DIR}/$t.ERR ] ; then | |
769 | : $((SKIP_CNT += 1)) | |
770 | touch "${donep}${TOTAL_CNT}" | |
771 | else | |
772 | if [ $BUILD_MANY == 1 ] ; then | |
773 | build_target ${t} ${TOTAL_CNT} & | |
774 | else | |
775 | CUR_TGT="${t}" | |
776 | build_target ${t} ${TOTAL_CNT} | |
777 | CUR_TGT='' | |
778 | fi | |
779 | fi | |
780 | fi | |
781 | ||
782 | # We maintain a running count of all the builds we have done. | |
783 | # Each finished build will have a file called ${donep}${n}, | |
784 | # where n is the index of the build. Each build | |
785 | # we've already noted as finished will have ${skipp}${n}. | |
786 | # We track the current index via TOTAL_CNT, and the oldest | |
787 | # index. When we exceed the maximum number of parallel builds, | |
788 | # We look from oldest to current for builds that have completed, | |
789 | # and update the current count and oldest index as appropriate. | |
790 | # If we've gone through the entire list, wait a second, and | |
791 | # reprocess the entire list until we find a build that has | |
792 | # completed | |
793 | if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then | |
794 | manage_builds | |
795 | fi | |
796 | done | |
797 | } | |
798 | ||
799 | #----------------------------------------------------------------------- | |
800 | ||
801 | kill_children() { | |
802 | local OS=$(uname -s) | |
803 | local children="" | |
804 | case "${OS}" in | |
805 | "Darwin") | |
806 | # Mac OS X is known to have BSD style ps | |
807 | local pgid=$(ps -p $$ -o pgid | sed -e "/PGID/d") | |
808 | children=$(ps -g $pgid -o pid | sed -e "/PID\|$$\|$pgid/d") | |
809 | ;; | |
810 | *) | |
811 | # everything else tries the GNU style | |
812 | local pgid=$(ps -p $$ --no-headers -o "%r" | tr -d ' ') | |
813 | children=$(pgrep -g $pgid | sed -e "/$$\|$pgid/d") | |
814 | ;; | |
815 | esac | |
816 | ||
817 | kill $children 2> /dev/null | |
818 | wait $children 2> /dev/null | |
819 | ||
820 | exit | |
821 | } | |
822 | ||
823 | print_stats() { | |
824 | if [ "$ONLY_LIST" == 'y' ] ; then return ; fi | |
825 | ||
826 | # Only count boards that completed | |
827 | : $((TOTAL_CNT = `find ${skipp}* 2> /dev/null | wc -l`)) | |
828 | ||
829 | rm -f ${donep}* ${skipp}* | |
830 | ||
831 | if [ $BUILD_MANY == 1 ] && [ -e "${OUTPUT_PREFIX}/ERR" ] ; then | |
832 | ERR_LIST=`grep -riwl error ${OUTPUT_PREFIX}/ERR/` | |
833 | ERR_LIST=`for f in $ERR_LIST ; do echo -n " $(basename $f)" ; done` | |
834 | ERR_CNT=`echo $ERR_LIST | wc -w | awk '{print $1}'` | |
835 | WRN_LIST=`grep -riwL error ${OUTPUT_PREFIX}/ERR/` | |
836 | WRN_LIST=`for f in $WRN_LIST ; do echo -n " $(basename $f)" ; done` | |
837 | WRN_CNT=`echo $WRN_LIST | wc -w | awk '{print $1}'` | |
838 | else | |
839 | # Remove the logs for any board that was interrupted | |
840 | rm -f ${LOG_DIR}/${CUR_TGT}.MAKELOG ${LOG_DIR}/${CUR_TGT}.ERR | |
841 | fi | |
842 | ||
843 | : $((TOTAL_CNT -= ${SKIP_CNT})) | |
844 | echo "" | |
845 | echo "--------------------- SUMMARY ----------------------------" | |
846 | if [ "$CONTINUE" = 'y' -o "$REBUILD_ERRORS" = 'y' ] ; then | |
847 | echo "Boards skipped: ${SKIP_CNT}" | |
848 | fi | |
849 | echo "Boards compiled: ${TOTAL_CNT}" | |
850 | if [ ${ERR_CNT} -gt 0 ] ; then | |
851 | echo "Boards with errors: ${ERR_CNT} (${ERR_LIST} )" | |
852 | fi | |
853 | if [ ${WRN_CNT} -gt 0 ] ; then | |
854 | echo "Boards with warnings but no errors: ${WRN_CNT} (${WRN_LIST} )" | |
855 | fi | |
856 | echo "----------------------------------------------------------" | |
857 | ||
858 | if [ $BUILD_MANY == 1 ] ; then | |
859 | kill_children | |
860 | fi | |
861 | ||
862 | exit $RC | |
863 | } | |
864 | ||
865 | #----------------------------------------------------------------------- | |
866 | ||
867 | # Build target groups selected by options, plus any command line args | |
868 | set -- ${SELECTED} "$@" | |
869 | # run PowerPC by default | |
870 | [ $# = 0 ] && set -- powerpc | |
871 | build_targets "$@" | |
872 | wait |