| | 1 | VERSION = 2015 |
| | 2 | PATCHLEVEL = 07 |
| | 3 | SUBLEVEL = |
| | 4 | EXTRAVERSION = -rc1 |
| | 5 | NAME = |
| | 6 | |
| | 7 | # *DOCUMENTATION* |
| | 8 | # To see a list of typical targets execute "make help" |
| | 9 | # More info can be located in ./README |
| | 10 | # Comments in this file are targeted only to the developer, do not |
| | 11 | # expect to learn how to build the kernel reading this file. |
| | 12 | |
| | 13 | # Do not use make's built-in rules and variables |
| | 14 | # (this increases performance and avoids hard-to-debug behaviour); |
| | 15 | MAKEFLAGS += -rR |
| | 16 | |
| | 17 | # Avoid funny character set dependencies |
| | 18 | unexport LC_ALL |
| | 19 | LC_COLLATE=C |
| | 20 | LC_NUMERIC=C |
| | 21 | export LC_COLLATE LC_NUMERIC |
| | 22 | |
| | 23 | # Avoid interference with shell env settings |
| | 24 | unexport GREP_OPTIONS |
| | 25 | |
| | 26 | # We are using a recursive build, so we need to do a little thinking |
| | 27 | # to get the ordering right. |
| | 28 | # |
| | 29 | # Most importantly: sub-Makefiles should only ever modify files in |
| | 30 | # their own directory. If in some directory we have a dependency on |
| | 31 | # a file in another dir (which doesn't happen often, but it's often |
| | 32 | # unavoidable when linking the built-in.o targets which finally |
| | 33 | # turn into vmlinux), we will call a sub make in that other dir, and |
| | 34 | # after that we are sure that everything which is in that other dir |
| | 35 | # is now up to date. |
| | 36 | # |
| | 37 | # The only cases where we need to modify files which have global |
| | 38 | # effects are thus separated out and done before the recursive |
| | 39 | # descending is started. They are now explicitly listed as the |
| | 40 | # prepare rule. |
| | 41 | |
| | 42 | # Beautify output |
| | 43 | # --------------------------------------------------------------------------- |
| | 44 | # |
| | 45 | # Normally, we echo the whole command before executing it. By making |
| | 46 | # that echo $($(quiet)$(cmd)), we now have the possibility to set |
| | 47 | # $(quiet) to choose other forms of output instead, e.g. |
| | 48 | # |
| | 49 | # quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@ |
| | 50 | # cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< |
| | 51 | # |
| | 52 | # If $(quiet) is empty, the whole command will be printed. |
| | 53 | # If it is set to "quiet_", only the short version will be printed. |
| | 54 | # If it is set to "silent_", nothing will be printed at all, since |
| | 55 | # the variable $(silent_cmd_cc_o_c) doesn't exist. |
| | 56 | # |
| | 57 | # A simple variant is to prefix commands with $(Q) - that's useful |
| | 58 | # for commands that shall be hidden in non-verbose mode. |
| | 59 | # |
| | 60 | # $(Q)ln $@ :< |
| | 61 | # |
| | 62 | # If KBUILD_VERBOSE equals 0 then the above command will be hidden. |
| | 63 | # If KBUILD_VERBOSE equals 1 then the above command is displayed. |
| | 64 | # |
| | 65 | # To put more focus on warnings, be less verbose as default |
| | 66 | # Use 'make V=1' to see the full commands |
| | 67 | |
| | 68 | ifeq ("$(origin V)", "command line") |
| | 69 | KBUILD_VERBOSE = $(V) |
| | 70 | endif |
| | 71 | ifndef KBUILD_VERBOSE |
| | 72 | KBUILD_VERBOSE = 0 |
| | 73 | endif |
| | 74 | |
| | 75 | ifeq ($(KBUILD_VERBOSE),1) |
| | 76 | quiet = |
| | 77 | Q = |
| | 78 | else |
| | 79 | quiet=quiet_ |
| | 80 | Q = @ |
| | 81 | endif |
| | 82 | |
| | 83 | # If the user is running make -s (silent mode), suppress echoing of |
| | 84 | # commands |
| | 85 | |
| | 86 | ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4 |
| | 87 | ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),) |
| | 88 | quiet=silent_ |
| | 89 | endif |
| | 90 | else # make-3.8x |
| | 91 | ifneq ($(filter s% -s%,$(MAKEFLAGS)),) |
| | 92 | quiet=silent_ |
| | 93 | endif |
| | 94 | endif |
| | 95 | |
| | 96 | export quiet Q KBUILD_VERBOSE |
| | 97 | |
| | 98 | # kbuild supports saving output files in a separate directory. |
| | 99 | # To locate output files in a separate directory two syntaxes are supported. |
| | 100 | # In both cases the working directory must be the root of the kernel src. |
| | 101 | # 1) O= |
| | 102 | # Use "make O=dir/to/store/output/files/" |
| | 103 | # |
| | 104 | # 2) Set KBUILD_OUTPUT |
| | 105 | # Set the environment variable KBUILD_OUTPUT to point to the directory |
| | 106 | # where the output files shall be placed. |
| | 107 | # export KBUILD_OUTPUT=dir/to/store/output/files/ |
| | 108 | # make |
| | 109 | # |
| | 110 | # The O= assignment takes precedence over the KBUILD_OUTPUT environment |
| | 111 | # variable. |
| | 112 | |
| | 113 | # KBUILD_SRC is set on invocation of make in OBJ directory |
| | 114 | # KBUILD_SRC is not intended to be used by the regular user (for now) |
| | 115 | ifeq ($(KBUILD_SRC),) |
| | 116 | |
| | 117 | # OK, Make called in directory where kernel src resides |
| | 118 | # Do we want to locate output files in a separate directory? |
| | 119 | ifeq ("$(origin O)", "command line") |
| | 120 | KBUILD_OUTPUT := $(O) |
| | 121 | endif |
| | 122 | |
| | 123 | # That's our default target when none is given on the command line |
| | 124 | PHONY := _all |
| | 125 | _all: |
| | 126 | |
| | 127 | # Cancel implicit rules on top Makefile |
| | 128 | $(CURDIR)/Makefile Makefile: ; |
| | 129 | |
| | 130 | ifneq ($(KBUILD_OUTPUT),) |
| | 131 | # Invoke a second make in the output directory, passing relevant variables |
| | 132 | # check that the output directory actually exists |
| | 133 | saved-output := $(KBUILD_OUTPUT) |
| | 134 | KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \ |
| | 135 | && /bin/pwd) |
| | 136 | $(if $(KBUILD_OUTPUT),, \ |
| | 137 | $(error failed to create output directory "$(saved-output)")) |
| | 138 | |
| | 139 | PHONY += $(MAKECMDGOALS) sub-make |
| | 140 | |
| | 141 | $(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make |
| | 142 | @: |
| | 143 | |
| | 144 | sub-make: FORCE |
| | 145 | $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \ |
| | 146 | -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS)) |
| | 147 | |
| | 148 | # Leave processing to above invocation of make |
| | 149 | skip-makefile := 1 |
| | 150 | endif # ifneq ($(KBUILD_OUTPUT),) |
| | 151 | endif # ifeq ($(KBUILD_SRC),) |
| | 152 | |
| | 153 | # We process the rest of the Makefile if this is the final invocation of make |
| | 154 | ifeq ($(skip-makefile),) |
| | 155 | |
| | 156 | # Do not print "Entering directory ...", |
| | 157 | # but we want to display it when entering to the output directory |
| | 158 | # so that IDEs/editors are able to understand relative filenames. |
| | 159 | MAKEFLAGS += --no-print-directory |
| | 160 | |
| | 161 | # Call a source code checker (by default, "sparse") as part of the |
| | 162 | # C compilation. |
| | 163 | # |
| | 164 | # Use 'make C=1' to enable checking of only re-compiled files. |
| | 165 | # Use 'make C=2' to enable checking of *all* source files, regardless |
| | 166 | # of whether they are re-compiled or not. |
| | 167 | # |
| | 168 | # See the file "Documentation/sparse.txt" for more details, including |
| | 169 | # where to get the "sparse" utility. |
| | 170 | |
| | 171 | ifeq ("$(origin C)", "command line") |
| | 172 | KBUILD_CHECKSRC = $(C) |
| | 173 | endif |
| | 174 | ifndef KBUILD_CHECKSRC |
| | 175 | KBUILD_CHECKSRC = 0 |
| | 176 | endif |
| | 177 | |
| | 178 | # Use make M=dir to specify directory of external module to build |
| | 179 | # Old syntax make ... SUBDIRS=$PWD is still supported |
| | 180 | # Setting the environment variable KBUILD_EXTMOD take precedence |
| | 181 | ifdef SUBDIRS |
| | 182 | KBUILD_EXTMOD ?= $(SUBDIRS) |
| | 183 | endif |
| | 184 | |
| | 185 | ifeq ("$(origin M)", "command line") |
| | 186 | KBUILD_EXTMOD := $(M) |
| | 187 | endif |
| | 188 | |
| | 189 | # If building an external module we do not care about the all: rule |
| | 190 | # but instead _all depend on modules |
| | 191 | PHONY += all |
| | 192 | ifeq ($(KBUILD_EXTMOD),) |
| | 193 | _all: all |
| | 194 | else |
| | 195 | _all: modules |
| | 196 | endif |
| | 197 | |
| | 198 | ifeq ($(KBUILD_SRC),) |
| | 199 | # building in the source tree |
| | 200 | srctree := . |
| | 201 | else |
| | 202 | ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR))) |
| | 203 | # building in a subdirectory of the source tree |
| | 204 | srctree := .. |
| | 205 | else |
| | 206 | srctree := $(KBUILD_SRC) |
| | 207 | endif |
| | 208 | endif |
| | 209 | objtree := . |
| | 210 | src := $(srctree) |
| | 211 | obj := $(objtree) |
| | 212 | |
| | 213 | VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD)) |
| | 214 | |
| | 215 | export srctree objtree VPATH |
| | 216 | |
| | 217 | # Make sure CDPATH settings don't interfere |
| | 218 | unexport CDPATH |
| | 219 | |
| | 220 | ######################################################################### |
| | 221 | |
| | 222 | HOSTARCH := $(shell uname -m | \ |
| | 223 | sed -e s/i.86/x86/ \ |
| | 224 | -e s/sun4u/sparc64/ \ |
| | 225 | -e s/arm.*/arm/ \ |
| | 226 | -e s/sa110/arm/ \ |
| | 227 | -e s/ppc64/powerpc/ \ |
| | 228 | -e s/ppc/powerpc/ \ |
| | 229 | -e s/macppc/powerpc/\ |
| | 230 | -e s/sh.*/sh/) |
| | 231 | |
| | 232 | HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \ |
| | 233 | sed -e 's/\(cygwin\).*/cygwin/') |
| | 234 | |
| | 235 | export HOSTARCH HOSTOS |
| | 236 | |
| | 237 | ######################################################################### |
| | 238 | |
| | 239 | # set default to nothing for native builds |
| | 240 | ifeq ($(HOSTARCH),$(ARCH)) |
| | 241 | CROSS_COMPILE ?= |
| | 242 | endif |
| | 243 | |
| | 244 | KCONFIG_CONFIG ?= .config |
| | 245 | export KCONFIG_CONFIG |
| | 246 | |
| | 247 | # SHELL used by kbuild |
| | 248 | CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \ |
| | 249 | else if [ -x /bin/bash ]; then echo /bin/bash; \ |
| | 250 | else echo sh; fi ; fi) |
| | 251 | |
| | 252 | HOSTCC = cc |
| | 253 | HOSTCXX = c++ |
| | 254 | HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer |
| | 255 | HOSTCXXFLAGS = -O2 |
| | 256 | |
| | 257 | ifeq ($(HOSTOS),cygwin) |
| | 258 | HOSTCFLAGS += -ansi |
| | 259 | endif |
| | 260 | |
| | 261 | # Mac OS X / Darwin's C preprocessor is Apple specific. It |
| | 262 | # generates numerous errors and warnings. We want to bypass it |
| | 263 | # and use GNU C's cpp. To do this we pass the -traditional-cpp |
| | 264 | # option to the compiler. Note that the -traditional-cpp flag |
| | 265 | # DOES NOT have the same semantics as GNU C's flag, all it does |
| | 266 | # is invoke the GNU preprocessor in stock ANSI/ISO C fashion. |
| | 267 | # |
| | 268 | # Apple's linker is similar, thanks to the new 2 stage linking |
| | 269 | # multiple symbol definitions are treated as errors, hence the |
| | 270 | # -multiply_defined suppress option to turn off this error. |
| | 271 | # |
| | 272 | ifeq ($(HOSTOS),darwin) |
| | 273 | # get major and minor product version (e.g. '10' and '6' for Snow Leopard) |
| | 274 | DARWIN_MAJOR_VERSION = $(shell sw_vers -productVersion | cut -f 1 -d '.') |
| | 275 | DARWIN_MINOR_VERSION = $(shell sw_vers -productVersion | cut -f 2 -d '.') |
| | 276 | |
| | 277 | os_x_before = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \ |
| | 278 | $(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;) |
| | 279 | |
| | 280 | # Snow Leopards build environment has no longer restrictions as described above |
| | 281 | HOSTCC = $(call os_x_before, 10, 5, "cc", "gcc") |
| | 282 | HOSTCFLAGS += $(call os_x_before, 10, 4, "-traditional-cpp") |
| | 283 | HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress") |
| | 284 | |
| | 285 | # since Lion (10.7) ASLR is on by default, but we use linker generated lists |
| | 286 | # in some host tools which is a problem then ... so disable ASLR for these |
| | 287 | # tools |
| | 288 | HOSTLDFLAGS += $(call os_x_before, 10, 7, "", "-Xlinker -no_pie") |
| | 289 | endif |
| | 290 | |
| | 291 | # Decide whether to build built-in, modular, or both. |
| | 292 | # Normally, just do built-in. |
| | 293 | |
| | 294 | KBUILD_MODULES := |
| | 295 | KBUILD_BUILTIN := 1 |
| | 296 | |
| | 297 | # If we have only "make modules", don't compile built-in objects. |
| | 298 | # When we're building modules with modversions, we need to consider |
| | 299 | # the built-in objects during the descend as well, in order to |
| | 300 | # make sure the checksums are up to date before we record them. |
| | 301 | |
| | 302 | ifeq ($(MAKECMDGOALS),modules) |
| | 303 | KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1) |
| | 304 | endif |
| | 305 | |
| | 306 | # If we have "make <whatever> modules", compile modules |
| | 307 | # in addition to whatever we do anyway. |
| | 308 | # Just "make" or "make all" shall build modules as well |
| | 309 | |
| | 310 | # U-Boot does not need modules |
| | 311 | #ifneq ($(filter all _all modules,$(MAKECMDGOALS)),) |
| | 312 | # KBUILD_MODULES := 1 |
| | 313 | #endif |
| | 314 | |
| | 315 | #ifeq ($(MAKECMDGOALS),) |
| | 316 | # KBUILD_MODULES := 1 |
| | 317 | #endif |
| | 318 | |
| | 319 | export KBUILD_MODULES KBUILD_BUILTIN |
| | 320 | export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD |
| | 321 | |
| | 322 | # Look for make include files relative to root of kernel src |
| | 323 | MAKEFLAGS += --include-dir=$(srctree) |
| | 324 | |
| | 325 | # We need some generic definitions (do not try to remake the file). |
| | 326 | $(srctree)/scripts/Kbuild.include: ; |
| | 327 | include $(srctree)/scripts/Kbuild.include |
| | 328 | |
| | 329 | # Make variables (CC, etc...) |
| | 330 | |
| | 331 | AS = $(CROSS_COMPILE)as |
| | 332 | # Always use GNU ld |
| | 333 | ifneq ($(shell $(CROSS_COMPILE)ld.bfd -v 2> /dev/null),) |
| | 334 | LD = $(CROSS_COMPILE)ld.bfd |
| | 335 | else |
| | 336 | LD = $(CROSS_COMPILE)ld |
| | 337 | endif |
| | 338 | CC = $(CROSS_COMPILE)gcc |
| | 339 | CPP = $(CC) -E |
| | 340 | AR = $(CROSS_COMPILE)ar |
| | 341 | NM = $(CROSS_COMPILE)nm |
| | 342 | LDR = $(CROSS_COMPILE)ldr |
| | 343 | STRIP = $(CROSS_COMPILE)strip |
| | 344 | OBJCOPY = $(CROSS_COMPILE)objcopy |
| | 345 | OBJDUMP = $(CROSS_COMPILE)objdump |
| | 346 | AWK = awk |
| | 347 | PERL = perl |
| | 348 | PYTHON = python |
| | 349 | DTC = dtc |
| | 350 | CHECK = sparse |
| | 351 | |
| | 352 | CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \ |
| | 353 | -Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF) |
| | 354 | |
| | 355 | KBUILD_CPPFLAGS := -D__KERNEL__ -D__UBOOT__ |
| | 356 | |
| | 357 | KBUILD_CFLAGS := -Wall -Wstrict-prototypes \ |
| | 358 | -Wno-format-security \ |
| | 359 | -fno-builtin -ffreestanding |
| | 360 | KBUILD_AFLAGS := -D__ASSEMBLY__ |
| | 361 | |
| | 362 | # Read UBOOTRELEASE from include/config/uboot.release (if it exists) |
| | 363 | UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null) |
| | 364 | UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION) |
| | 365 | |
| | 366 | export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION |
| | 367 | export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR |
| | 368 | export CONFIG_SHELL HOSTCC HOSTCFLAGS HOSTLDFLAGS CROSS_COMPILE AS LD CC |
| | 369 | export CPP AR NM LDR STRIP OBJCOPY OBJDUMP |
| | 370 | export MAKE AWK PERL PYTHON |
| | 371 | export HOSTCXX HOSTCXXFLAGS DTC CHECK CHECKFLAGS |
| | 372 | |
| | 373 | export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS LDFLAGS |
| | 374 | export KBUILD_CFLAGS KBUILD_AFLAGS |
| | 375 | |
| | 376 | # When compiling out-of-tree modules, put MODVERDIR in the module |
| | 377 | # tree rather than in the kernel tree. The kernel tree might |
| | 378 | # even be read-only. |
| | 379 | export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions |
| | 380 | |
| | 381 | # Files to ignore in find ... statements |
| | 382 | |
| | 383 | export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \ |
| | 384 | -name CVS -o -name .pc -o -name .hg -o -name .git \) \ |
| | 385 | -prune -o |
| | 386 | export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \ |
| | 387 | --exclude CVS --exclude .pc --exclude .hg --exclude .git |
| | 388 | |
| | 389 | # =========================================================================== |
| | 390 | # Rules shared between *config targets and build targets |
| | 391 | |
| | 392 | # Basic helpers built in scripts/ |
| | 393 | PHONY += scripts_basic |
| | 394 | scripts_basic: |
| | 395 | $(Q)$(MAKE) $(build)=scripts/basic |
| | 396 | $(Q)rm -f .tmp_quiet_recordmcount |
| | 397 | |
| | 398 | # To avoid any implicit rule to kick in, define an empty command. |
| | 399 | scripts/basic/%: scripts_basic ; |
| | 400 | |
| | 401 | PHONY += outputmakefile |
| | 402 | # outputmakefile generates a Makefile in the output directory, if using a |
| | 403 | # separate output directory. This allows convenient use of make in the |
| | 404 | # output directory. |
| | 405 | outputmakefile: |
| | 406 | ifneq ($(KBUILD_SRC),) |
| | 407 | $(Q)ln -fsn $(srctree) source |
| | 408 | $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \ |
| | 409 | $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL) |
| | 410 | endif |
| | 411 | |
| | 412 | # To make sure we do not include .config for any of the *config targets |
| | 413 | # catch them early, and hand them over to scripts/kconfig/Makefile |
| | 414 | # It is allowed to specify more targets when calling make, including |
| | 415 | # mixing *config targets and build targets. |
| | 416 | # For example 'make oldconfig all'. |
| | 417 | # Detect when mixed targets is specified, and make a second invocation |
| | 418 | # of make so .config is not included in this case either (for *config). |
| | 419 | |
| | 420 | version_h := include/generated/version_autogenerated.h |
| | 421 | timestamp_h := include/generated/timestamp_autogenerated.h |
| | 422 | |
| | 423 | no-dot-config-targets := clean clobber mrproper distclean \ |
| | 424 | help %docs check% coccicheck \ |
| | 425 | ubootversion backup |
| | 426 | |
| | 427 | config-targets := 0 |
| | 428 | mixed-targets := 0 |
| | 429 | dot-config := 1 |
| | 430 | |
| | 431 | ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),) |
| | 432 | ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),) |
| | 433 | dot-config := 0 |
| | 434 | endif |
| | 435 | endif |
| | 436 | |
| | 437 | ifeq ($(KBUILD_EXTMOD),) |
| | 438 | ifneq ($(filter config %config,$(MAKECMDGOALS)),) |
| | 439 | config-targets := 1 |
| | 440 | ifneq ($(filter-out config %config,$(MAKECMDGOALS)),) |
| | 441 | mixed-targets := 1 |
| | 442 | endif |
| | 443 | endif |
| | 444 | endif |
| | 445 | |
| | 446 | ifeq ($(mixed-targets),1) |
| | 447 | # =========================================================================== |
| | 448 | # We're called with mixed targets (*config and build targets). |
| | 449 | # Handle them one by one. |
| | 450 | |
| | 451 | PHONY += $(MAKECMDGOALS) __build_one_by_one |
| | 452 | |
| | 453 | $(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one |
| | 454 | @: |
| | 455 | |
| | 456 | __build_one_by_one: |
| | 457 | $(Q)set -e; \ |
| | 458 | for i in $(MAKECMDGOALS); do \ |
| | 459 | $(MAKE) -f $(srctree)/Makefile $$i; \ |
| | 460 | done |
| | 461 | |
| | 462 | else |
| | 463 | ifeq ($(config-targets),1) |
| | 464 | # =========================================================================== |
| | 465 | # *config targets only - make sure prerequisites are updated, and descend |
| | 466 | # in scripts/kconfig to make the *config target |
| | 467 | |
| | 468 | KBUILD_DEFCONFIG := sandbox_defconfig |
| | 469 | export KBUILD_DEFCONFIG KBUILD_KCONFIG |
| | 470 | |
| | 471 | config: scripts_basic outputmakefile FORCE |
| | 472 | $(Q)$(MAKE) $(build)=scripts/kconfig $@ |
| | 473 | |
| | 474 | %config: scripts_basic outputmakefile FORCE |
| | 475 | $(Q)$(MAKE) $(build)=scripts/kconfig $@ |
| | 476 | |
| | 477 | else |
| | 478 | # =========================================================================== |
| | 479 | # Build targets only - this includes vmlinux, arch specific targets, clean |
| | 480 | # targets and others. In general all targets except *config targets. |
| | 481 | |
| | 482 | ifeq ($(dot-config),1) |
| | 483 | # Read in config |
| | 484 | -include include/config/auto.conf |
| | 485 | |
| | 486 | # Read in dependencies to all Kconfig* files, make sure to run |
| | 487 | # oldconfig if changes are detected. |
| | 488 | -include include/config/auto.conf.cmd |
| | 489 | |
| | 490 | # To avoid any implicit rule to kick in, define an empty command |
| | 491 | $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ; |
| | 492 | |
| | 493 | # If .config is newer than include/config/auto.conf, someone tinkered |
| | 494 | # with it and forgot to run make oldconfig. |
| | 495 | # if auto.conf.cmd is missing then we are probably in a cleaned tree so |
| | 496 | # we execute the config step to be sure to catch updated Kconfig files |
| | 497 | include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd |
| | 498 | $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig |
| | 499 | @# If the following part fails, include/config/auto.conf should be |
| | 500 | @# deleted so "make silentoldconfig" will be re-run on the next build. |
| | 501 | $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf || \ |
| | 502 | { rm -f include/config/auto.conf; false; } |
| | 503 | @# include/config.h has been updated after "make silentoldconfig". |
| | 504 | @# We need to touch include/config/auto.conf so it gets newer |
| | 505 | @# than include/config.h. |
| | 506 | @# Otherwise, 'make silentoldconfig' would be invoked twice. |
| | 507 | $(Q)touch include/config/auto.conf |
| | 508 | |
| | 509 | -include include/autoconf.mk |
| | 510 | -include include/autoconf.mk.dep |
| | 511 | |
| | 512 | # We want to include arch/$(ARCH)/config.mk only when include/config/auto.conf |
| | 513 | # is up-to-date. When we switch to a different board configuration, old CONFIG |
| | 514 | # macros are still remaining in include/config/auto.conf. Without the following |
| | 515 | # gimmick, wrong config.mk would be included leading nasty warnings/errors. |
| | 516 | ifneq ($(wildcard $(KCONFIG_CONFIG)),) |
| | 517 | ifneq ($(wildcard include/config/auto.conf),) |
| | 518 | autoconf_is_old := $(shell find . -path ./$(KCONFIG_CONFIG) -newer \ |
| | 519 | include/config/auto.conf) |
| | 520 | ifeq ($(autoconf_is_old),) |
| | 521 | include $(srctree)/config.mk |
| | 522 | include $(srctree)/arch/$(ARCH)/Makefile |
| | 523 | endif |
| | 524 | endif |
| | 525 | endif |
| | 526 | |
| | 527 | # If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use |
| | 528 | # that (or fail if absent). Otherwise, search for a linker script in a |
| | 529 | # standard location. |
| | 530 | |
| | 531 | ifndef LDSCRIPT |
| | 532 | #LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug |
| | 533 | ifdef CONFIG_SYS_LDSCRIPT |
| | 534 | # need to strip off double quotes |
| | 535 | LDSCRIPT := $(srctree)/$(CONFIG_SYS_LDSCRIPT:"%"=%) |
| | 536 | endif |
| | 537 | endif |
| | 538 | |
| | 539 | # If there is no specified link script, we look in a number of places for it |
| | 540 | ifndef LDSCRIPT |
| | 541 | ifeq ($(wildcard $(LDSCRIPT)),) |
| | 542 | LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds |
| | 543 | endif |
| | 544 | ifeq ($(wildcard $(LDSCRIPT)),) |
| | 545 | LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot.lds |
| | 546 | endif |
| | 547 | ifeq ($(wildcard $(LDSCRIPT)),) |
| | 548 | LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot.lds |
| | 549 | endif |
| | 550 | endif |
| | 551 | |
| | 552 | else |
| | 553 | # Dummy target needed, because used as prerequisite |
| | 554 | include/config/auto.conf: ; |
| | 555 | endif # $(dot-config) |
| | 556 | |
| | 557 | ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE |
| | 558 | KBUILD_CFLAGS += -Os |
| | 559 | else |
| | 560 | KBUILD_CFLAGS += -O2 |
| | 561 | endif |
| | 562 | |
| | 563 | ifdef BUILD_TAG |
| | 564 | KBUILD_CFLAGS += -DBUILD_TAG='"$(BUILD_TAG)"' |
| | 565 | endif |
| | 566 | |
| | 567 | KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector) |
| | 568 | |
| | 569 | KBUILD_CFLAGS += -g |
| | 570 | # $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format> |
| | 571 | # option to the assembler. |
| | 572 | KBUILD_AFLAGS += -g |
| | 573 | |
| | 574 | # Report stack usage if supported |
| | 575 | ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-stack-usage.sh $(CC)),y) |
| | 576 | KBUILD_CFLAGS += -fstack-usage |
| | 577 | endif |
| | 578 | |
| | 579 | KBUILD_CFLAGS += $(call cc-option,-Wno-format-nonliteral) |
| | 580 | |
| | 581 | # turn jbsr into jsr for m68k |
| | 582 | ifeq ($(ARCH),m68k) |
| | 583 | ifeq ($(findstring 3.4,$(shell $(CC) --version)),3.4) |
| | 584 | KBUILD_AFLAGS += -Wa,-gstabs,-S |
| | 585 | endif |
| | 586 | endif |
| | 587 | |
| | 588 | # Prohibit date/time macros, which would make the build non-deterministic |
| | 589 | KBUILD_CFLAGS += $(call cc-option,-Werror=date-time) |
| | 590 | |
| | 591 | ifneq ($(CONFIG_SYS_TEXT_BASE),) |
| | 592 | KBUILD_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) |
| | 593 | endif |
| | 594 | |
| | 595 | export CONFIG_SYS_TEXT_BASE |
| | 596 | |
| | 597 | include $(srctree)/scripts/Makefile.extrawarn |
| | 598 | |
| | 599 | # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments |
| | 600 | KBUILD_CPPFLAGS += $(KCPPFLAGS) |
| | 601 | KBUILD_AFLAGS += $(KAFLAGS) |
| | 602 | KBUILD_CFLAGS += $(KCFLAGS) |
| | 603 | |
| | 604 | # Use UBOOTINCLUDE when you must reference the include/ directory. |
| | 605 | # Needed to be compatible with the O= option |
| | 606 | UBOOTINCLUDE := \ |
| | 607 | -Iinclude \ |
| | 608 | $(if $(KBUILD_SRC), -I$(srctree)/include) \ |
| | 609 | -I$(srctree)/arch/$(ARCH)/include \ |
| | 610 | -include $(srctree)/include/linux/kconfig.h |
| | 611 | |
| | 612 | NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include) |
| | 613 | CHECKFLAGS += $(NOSTDINC_FLAGS) |
| | 614 | |
| | 615 | # FIX ME |
| | 616 | cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \ |
| | 617 | $(NOSTDINC_FLAGS) |
| | 618 | c_flags := $(KBUILD_CFLAGS) $(cpp_flags) |
| | 619 | |
| | 620 | ######################################################################### |
| | 621 | # U-Boot objects....order is important (i.e. start must be first) |
| | 622 | |
| | 623 | HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n) |
| | 624 | |
| | 625 | libs-y += lib/ |
| | 626 | libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/ |
| | 627 | libs-$(CONFIG_OF_EMBED) += dts/ |
| | 628 | libs-y += fs/ |
| | 629 | libs-y += net/ |
| | 630 | libs-y += disk/ |
| | 631 | libs-y += drivers/ |
| | 632 | libs-y += drivers/dma/ |
| | 633 | libs-y += drivers/gpio/ |
| | 634 | libs-y += drivers/i2c/ |
| | 635 | libs-y += drivers/mmc/ |
| | 636 | libs-y += drivers/mtd/ |
| | 637 | libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/ |
| | 638 | libs-y += drivers/mtd/onenand/ |
| | 639 | libs-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/ |
| | 640 | libs-y += drivers/mtd/spi/ |
| | 641 | libs-y += drivers/net/ |
| | 642 | libs-y += drivers/net/phy/ |
| | 643 | libs-y += drivers/pci/ |
| | 644 | libs-y += drivers/power/ \ |
| | 645 | drivers/power/fuel_gauge/ \ |
| | 646 | drivers/power/mfd/ \ |
| | 647 | drivers/power/pmic/ \ |
| | 648 | drivers/power/battery/ |
| | 649 | libs-y += drivers/spi/ |
| | 650 | libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/ |
| | 651 | libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/ |
| | 652 | libs-y += drivers/serial/ |
| | 653 | libs-y += drivers/usb/dwc3/ |
| | 654 | libs-y += drivers/usb/emul/ |
| | 655 | libs-y += drivers/usb/eth/ |
| | 656 | libs-y += drivers/usb/gadget/ |
| | 657 | libs-y += drivers/usb/gadget/udc/ |
| | 658 | libs-y += drivers/usb/host/ |
| | 659 | libs-y += drivers/usb/musb/ |
| | 660 | libs-y += drivers/usb/musb-new/ |
| | 661 | libs-y += drivers/usb/phy/ |
| | 662 | libs-y += drivers/usb/ulpi/ |
| | 663 | libs-y += common/ |
| | 664 | libs-$(CONFIG_API) += api/ |
| | 665 | libs-$(CONFIG_HAS_POST) += post/ |
| | 666 | libs-y += test/ |
| | 667 | libs-y += test/dm/ |
| | 668 | |
| | 669 | libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/) |
| | 670 | |
| | 671 | libs-y := $(sort $(libs-y)) |
| | 672 | |
| | 673 | u-boot-dirs := $(patsubst %/,%,$(filter %/, $(libs-y))) tools examples |
| | 674 | |
| | 675 | u-boot-alldirs := $(sort $(u-boot-dirs) $(patsubst %/,%,$(filter %/, $(libs-)))) |
| | 676 | |
| | 677 | libs-y := $(patsubst %/, %/built-in.o, $(libs-y)) |
| | 678 | |
| | 679 | u-boot-init := $(head-y) |
| | 680 | u-boot-main := $(libs-y) |
| | 681 | |
| | 682 | |
| | 683 | # Add GCC lib |
| | 684 | ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y) |
| | 685 | PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a |
| | 686 | else |
| | 687 | PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc |
| | 688 | endif |
| | 689 | PLATFORM_LIBS += $(PLATFORM_LIBGCC) |
| | 690 | export PLATFORM_LIBS |
| | 691 | export PLATFORM_LIBGCC |
| | 692 | |
| | 693 | # Special flags for CPP when processing the linker script. |
| | 694 | # Pass the version down so we can handle backwards compatibility |
| | 695 | # on the fly. |
| | 696 | LDPPFLAGS += \ |
| | 697 | -include $(srctree)/include/u-boot/u-boot.lds.h \ |
| | 698 | -DCPUDIR=$(CPUDIR) \ |
| | 699 | $(shell $(LD) --version | \ |
| | 700 | sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p') |
| | 701 | |
| | 702 | ######################################################################### |
| | 703 | ######################################################################### |
| | 704 | |
| | 705 | ifneq ($(CONFIG_BOARD_SIZE_LIMIT),) |
| | 706 | BOARD_SIZE_CHECK = \ |
| | 707 | @actual=`wc -c $@ | awk '{print $$1}'`; \ |
| | 708 | limit=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \ |
| | 709 | if test $$actual -gt $$limit; then \ |
| | 710 | echo "$@ exceeds file size limit:" >&2 ; \ |
| | 711 | echo " limit: $$limit bytes" >&2 ; \ |
| | 712 | echo " actual: $$actual bytes" >&2 ; \ |
| | 713 | echo " excess: $$((actual - limit)) bytes" >&2; \ |
| | 714 | exit 1; \ |
| | 715 | fi |
| | 716 | else |
| | 717 | BOARD_SIZE_CHECK = |
| | 718 | endif |
| | 719 | |
| | 720 | # Statically apply RELA-style relocations (currently arm64 only) |
| | 721 | ifneq ($(CONFIG_STATIC_RELA),) |
| | 722 | # $(1) is u-boot ELF, $(2) is u-boot bin, $(3) is text base |
| | 723 | DO_STATIC_RELA = \ |
| | 724 | start=$$($(NM) $(1) | grep __rel_dyn_start | cut -f 1 -d ' '); \ |
| | 725 | end=$$($(NM) $(1) | grep __rel_dyn_end | cut -f 1 -d ' '); \ |
| | 726 | tools/relocate-rela $(2) $(3) $$start $$end |
| | 727 | else |
| | 728 | DO_STATIC_RELA = |
| | 729 | endif |
| | 730 | |
| | 731 | # Always append ALL so that arch config.mk's can add custom ones |
| | 732 | ALL-y += u-boot.srec u-boot.bin System.map u-boot.cfg binary_size_check |
| | 733 | |
| | 734 | ALL-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin |
| | 735 | ifeq ($(CONFIG_SPL_FSL_PBL),y) |
| | 736 | ALL-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin |
| | 737 | else |
| | 738 | ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl |
| | 739 | endif |
| | 740 | ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin |
| | 741 | ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img |
| | 742 | ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin |
| | 743 | ALL-$(CONFIG_OF_SEPARATE) += u-boot.dtb u-boot-dtb.bin |
| | 744 | ifeq ($(CONFIG_SPL_FRAMEWORK),y) |
| | 745 | ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img |
| | 746 | endif |
| | 747 | ALL-$(CONFIG_OF_HOSTFILE) += u-boot.dtb |
| | 748 | ifneq ($(CONFIG_SPL_TARGET),) |
| | 749 | ALL-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%) |
| | 750 | endif |
| | 751 | ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf |
| | 752 | |
| | 753 | ifneq ($(BUILD_ROM),) |
| | 754 | ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom |
| | 755 | endif |
| | 756 | |
| | 757 | # enable combined SPL/u-boot/dtb rules for tegra |
| | 758 | ifneq ($(CONFIG_TEGRA),) |
| | 759 | ifeq ($(CONFIG_SPL),y) |
| | 760 | ifeq ($(CONFIG_OF_SEPARATE),y) |
| | 761 | ALL-y += u-boot-dtb-tegra.bin |
| | 762 | else |
| | 763 | ALL-y += u-boot-nodtb-tegra.bin |
| | 764 | endif |
| | 765 | endif |
| | 766 | endif |
| | 767 | |
| | 768 | # Add optional build target if defined in board/cpu/soc headers |
| | 769 | ifneq ($(CONFIG_BUILD_TARGET),) |
| | 770 | ALL-y += $(CONFIG_BUILD_TARGET:"%"=%) |
| | 771 | endif |
| | 772 | |
| | 773 | LDFLAGS_u-boot += $(LDFLAGS_FINAL) |
| | 774 | ifneq ($(CONFIG_SYS_TEXT_BASE),) |
| | 775 | LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE) |
| | 776 | endif |
| | 777 | |
| | 778 | quiet_cmd_objcopy = OBJCOPY $@ |
| | 779 | cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@ |
| | 780 | |
| | 781 | quiet_cmd_mkimage = MKIMAGE $@ |
| | 782 | cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \ |
| | 783 | $(if $(KBUILD_VERBOSE:1=), >/dev/null) |
| | 784 | |
| | 785 | quiet_cmd_cat = CAT $@ |
| | 786 | cmd_cat = cat $(filter-out $(PHONY), $^) > $@ |
| | 787 | |
| | 788 | append = cat $(filter-out $< $(PHONY), $^) >> $@ |
| | 789 | |
| | 790 | quiet_cmd_pad_cat = CAT $@ |
| | 791 | cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@ |
| | 792 | |
| | 793 | all: $(ALL-y) |
| | 794 | ifneq ($(CONFIG_SYS_GENERIC_BOARD),y) |
| | 795 | @echo "===================== WARNING ======================" |
| | 796 | @echo "Please convert this board to generic board." |
| | 797 | @echo "Otherwise it will be removed by the end of 2014." |
| | 798 | @echo "See doc/README.generic-board for further information" |
| | 799 | @echo "====================================================" |
| | 800 | endif |
| | 801 | ifeq ($(CONFIG_DM_I2C_COMPAT),y) |
| | 802 | @echo "===================== WARNING ======================" |
| | 803 | @echo "This board uses CONFIG_DM_I2C_COMPAT. Please remove" |
| | 804 | @echo "(possibly in a subsequent patch in your series)" |
| | 805 | @echo "before sending patches to the mailing list." |
| | 806 | @echo "====================================================" |
| | 807 | endif |
| | 808 | |
| | 809 | PHONY += dtbs |
| | 810 | dtbs dts/dt.dtb: checkdtc u-boot |
| | 811 | $(Q)$(MAKE) $(build)=dts dtbs |
| | 812 | |
| | 813 | u-boot-dtb.bin: u-boot.bin dts/dt.dtb FORCE |
| | 814 | $(call if_changed,cat) |
| | 815 | |
| | 816 | %.imx: %.bin |
| | 817 | $(Q)$(MAKE) $(build)=arch/arm/imx-common $@ |
| | 818 | |
| | 819 | quiet_cmd_copy = COPY $@ |
| | 820 | cmd_copy = cp $< $@ |
| | 821 | |
| | 822 | u-boot.dtb: dts/dt.dtb |
| | 823 | $(call cmd,copy) |
| | 824 | |
| | 825 | OBJCOPYFLAGS_u-boot.hex := -O ihex |
| | 826 | |
| | 827 | OBJCOPYFLAGS_u-boot.srec := -O srec |
| | 828 | |
| | 829 | u-boot.hex u-boot.srec: u-boot FORCE |
| | 830 | $(call if_changed,objcopy) |
| | 831 | |
| | 832 | OBJCOPYFLAGS_u-boot.bin := -O binary \ |
| | 833 | $(if $(CONFIG_X86_RESET_VECTOR),-R .start16 -R .resetvec) |
| | 834 | |
| | 835 | binary_size_check: u-boot.bin FORCE |
| | 836 | @file_size=$(shell wc -c u-boot.bin | awk '{print $$1}') ; \ |
| | 837 | map_size=$(shell cat u-boot.map | \ |
| | 838 | awk '/_image_copy_start/ {start = $$1} /_image_binary_end/ {end = $$1} END {if (start != "" && end != "") print "ibase=16; " toupper(end) " - " toupper(start)}' \ |
| | 839 | | sed 's/0X//g' \ |
| | 840 | | bc); \ |
| | 841 | if [ "" != "$$map_size" ]; then \ |
| | 842 | if test $$map_size -ne $$file_size; then \ |
| | 843 | echo "u-boot.map shows a binary size of $$map_size" >&2 ; \ |
| | 844 | echo " but u-boot.bin shows $$file_size" >&2 ; \ |
| | 845 | exit 1; \ |
| | 846 | fi \ |
| | 847 | fi |
| | 848 | |
| | 849 | u-boot.bin: u-boot FORCE |
| | 850 | $(call if_changed,objcopy) |
| | 851 | $(call DO_STATIC_RELA,$<,$@,$(CONFIG_SYS_TEXT_BASE)) |
| | 852 | $(BOARD_SIZE_CHECK) |
| | 853 | |
| | 854 | u-boot.ldr: u-boot |
| | 855 | $(CREATE_LDR_ENV) |
| | 856 | $(LDR) -T $(CONFIG_CPU) -c $@ $< $(LDR_FLAGS) |
| | 857 | $(BOARD_SIZE_CHECK) |
| | 858 | |
| | 859 | OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex |
| | 860 | |
| | 861 | OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec |
| | 862 | |
| | 863 | u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE |
| | 864 | $(call if_changed,objcopy) |
| | 865 | |
| | 866 | # |
| | 867 | # U-Boot entry point, needed for booting of full-blown U-Boot |
| | 868 | # from the SPL U-Boot version. |
| | 869 | # |
| | 870 | ifndef CONFIG_SYS_UBOOT_START |
| | 871 | CONFIG_SYS_UBOOT_START := 0 |
| | 872 | endif |
| | 873 | |
| | 874 | # Create a file containing the configuration options the image was built with |
| | 875 | quiet_cmd_cpp_cfg = CFG $@ |
| | 876 | cmd_cpp_cfg = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \ |
| | 877 | -D__ASSEMBLY__ -x assembler-with-cpp -P -dM -E -o $@ $< |
| | 878 | |
| | 879 | MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \ |
| | 880 | -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \ |
| | 881 | -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" |
| | 882 | |
| | 883 | MKIMAGEFLAGS_u-boot.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \ |
| | 884 | -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) |
| | 885 | |
| | 886 | MKIMAGEFLAGS_u-boot-spl.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \ |
| | 887 | -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) |
| | 888 | |
| | 889 | MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \ |
| | 890 | -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage |
| | 891 | |
| | 892 | u-boot.img u-boot.kwb u-boot.pbl: u-boot.bin FORCE |
| | 893 | $(call if_changed,mkimage) |
| | 894 | |
| | 895 | u-boot-spl.kwb: u-boot.img spl/u-boot-spl.bin FORCE |
| | 896 | $(call if_changed,mkimage) |
| | 897 | |
| | 898 | MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img) |
| | 899 | |
| | 900 | u-boot-dtb.img: u-boot-dtb.bin FORCE |
| | 901 | $(call if_changed,mkimage) |
| | 902 | |
| | 903 | u-boot.sha1: u-boot.bin |
| | 904 | tools/ubsha1 u-boot.bin |
| | 905 | |
| | 906 | u-boot.dis: u-boot |
| | 907 | $(OBJDUMP) -d $< > $@ |
| | 908 | |
| | 909 | u-boot.cfg: include/config.h |
| | 910 | $(call if_changed,cpp_cfg) |
| | 911 | |
| | 912 | ifdef CONFIG_TPL |
| | 913 | SPL_PAYLOAD := tpl/u-boot-with-tpl.bin |
| | 914 | else |
| | 915 | SPL_PAYLOAD := u-boot.bin |
| | 916 | endif |
| | 917 | |
| | 918 | OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \ |
| | 919 | --pad-to=$(CONFIG_SPL_PAD_TO) |
| | 920 | u-boot-with-spl.bin: spl/u-boot-spl.bin $(SPL_PAYLOAD) FORCE |
| | 921 | $(call if_changed,pad_cat) |
| | 922 | |
| | 923 | MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE) |
| | 924 | |
| | 925 | lpc32xx-spl.img: spl/u-boot-spl.bin FORCE |
| | 926 | $(call if_changed,mkimage) |
| | 927 | |
| | 928 | OBJCOPYFLAGS_lpc32xx-boot-0.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) |
| | 929 | |
| | 930 | lpc32xx-boot-0.bin: lpc32xx-spl.img |
| | 931 | $(call if_changed,objcopy) |
| | 932 | |
| | 933 | OBJCOPYFLAGS_lpc32xx-boot-1.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) |
| | 934 | |
| | 935 | lpc32xx-boot-1.bin: lpc32xx-spl.img |
| | 936 | $(call if_changed,objcopy) |
| | 937 | |
| | 938 | lpc32xx-full.bin: lpc32xx-boot-0.bin lpc32xx-boot-1.bin u-boot.img |
| | 939 | $(call if_changed,cat) |
| | 940 | |
| | 941 | CLEAN_FILES += lpc32xx-* |
| | 942 | |
| | 943 | OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \ |
| | 944 | --pad-to=$(CONFIG_TPL_PAD_TO) |
| | 945 | tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE |
| | 946 | $(call if_changed,pad_cat) |
| | 947 | |
| | 948 | SPL: spl/u-boot-spl.bin FORCE |
| | 949 | $(Q)$(MAKE) $(build)=arch/arm/imx-common $@ |
| | 950 | |
| | 951 | u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL u-boot.bin FORCE |
| | 952 | $(Q)$(MAKE) $(build)=arch/arm/imx-common $@ |
| | 953 | |
| | 954 | MKIMAGEFLAGS_u-boot.ubl = -n $(UBL_CONFIG) -T ublimage -e $(CONFIG_SYS_TEXT_BASE) |
| | 955 | |
| | 956 | u-boot.ubl: u-boot-with-spl.bin FORCE |
| | 957 | $(call if_changed,mkimage) |
| | 958 | |
| | 959 | MKIMAGEFLAGS_u-boot-spl.ais = -s -n $(if $(CONFIG_AIS_CONFIG_FILE), \ |
| | 960 | $(srctree)/$(CONFIG_AIS_CONFIG_FILE:"%"=%),"/dev/null") \ |
| | 961 | -T aisimage -e $(CONFIG_SPL_TEXT_BASE) |
| | 962 | spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE |
| | 963 | $(call if_changed,mkimage) |
| | 964 | |
| | 965 | OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) |
| | 966 | u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE |
| | 967 | $(call if_changed,pad_cat) |
| | 968 | |
| | 969 | u-boot-signed.sb: u-boot.bin spl/u-boot-spl.bin |
| | 970 | $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot-signed.sb |
| | 971 | u-boot.sb: u-boot.bin spl/u-boot-spl.bin |
| | 972 | $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb |
| | 973 | |
| | 974 | # On x600 (SPEAr600) U-Boot is appended to U-Boot SPL. |
| | 975 | # Both images are created using mkimage (crc etc), so that the ROM |
| | 976 | # bootloader can check its integrity. Padding needs to be done to the |
| | 977 | # SPL image (with mkimage header) and not the binary. Otherwise the resulting image |
| | 978 | # which is loaded/copied by the ROM bootloader to SRAM doesn't fit. |
| | 979 | # The resulting image containing both U-Boot images is called u-boot.spr |
| | 980 | MKIMAGEFLAGS_u-boot-spl.img = -A $(ARCH) -T firmware -C none \ |
| | 981 | -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER |
| | 982 | spl/u-boot-spl.img: spl/u-boot-spl.bin FORCE |
| | 983 | $(call if_changed,mkimage) |
| | 984 | |
| | 985 | OBJCOPYFLAGS_u-boot.spr = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \ |
| | 986 | --gap-fill=0xff |
| | 987 | u-boot.spr: spl/u-boot-spl.img u-boot.img FORCE |
| | 988 | $(call if_changed,pad_cat) |
| | 989 | |
| | 990 | MKIMAGEFLAGS_u-boot-spl.gph = -A $(ARCH) -T gpimage -C none \ |
| | 991 | -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n SPL |
| | 992 | spl/u-boot-spl.gph: spl/u-boot-spl.bin FORCE |
| | 993 | $(call if_changed,mkimage) |
| | 994 | |
| | 995 | OBJCOPYFLAGS_u-boot-spi.gph = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \ |
| | 996 | --gap-fill=0 |
| | 997 | u-boot-spi.gph: spl/u-boot-spl.gph u-boot.img FORCE |
| | 998 | $(call if_changed,pad_cat) |
| | 999 | |
| | 1000 | MKIMAGEFLAGS_u-boot-nand.gph = -A $(ARCH) -T gpimage -C none \ |
| | 1001 | -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) -n U-Boot |
| | 1002 | u-boot-nand.gph: u-boot.bin FORCE |
| | 1003 | $(call if_changed,mkimage) |
| | 1004 | @dd if=/dev/zero bs=8 count=1 2>/dev/null >> $@ |
| | 1005 | |
| | 1006 | # x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including |
| | 1007 | # reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in |
| | 1008 | # the middle. |
| | 1009 | ifneq ($(CONFIG_X86_RESET_VECTOR),) |
| | 1010 | rom: u-boot.rom FORCE |
| | 1011 | |
| | 1012 | IFDTOOL=$(objtree)/tools/ifdtool |
| | 1013 | IFDTOOL_FLAGS = -f 0:$(objtree)/u-boot.dtb |
| | 1014 | IFDTOOL_FLAGS += -m 0x$(shell $(NM) u-boot |grep _dt_ucode_base_size |cut -d' ' -f1) |
| | 1015 | IFDTOOL_FLAGS += -U $(CONFIG_SYS_TEXT_BASE):$(objtree)/u-boot.bin |
| | 1016 | IFDTOOL_FLAGS += -w $(CONFIG_SYS_X86_START16):$(objtree)/u-boot-x86-16bit.bin |
| | 1017 | |
| | 1018 | ifneq ($(CONFIG_HAVE_INTEL_ME),) |
| | 1019 | IFDTOOL_ME_FLAGS = -D $(srctree)/board/$(BOARDDIR)/descriptor.bin |
| | 1020 | IFDTOOL_ME_FLAGS += -i ME:$(srctree)/board/$(BOARDDIR)/me.bin |
| | 1021 | endif |
| | 1022 | |
| | 1023 | ifneq ($(CONFIG_HAVE_MRC),) |
| | 1024 | IFDTOOL_FLAGS += -w $(CONFIG_X86_MRC_ADDR):$(srctree)/board/$(BOARDDIR)/mrc.bin |
| | 1025 | endif |
| | 1026 | |
| | 1027 | ifneq ($(CONFIG_HAVE_FSP),) |
| | 1028 | IFDTOOL_FLAGS += -w $(CONFIG_FSP_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_FSP_FILE) |
| | 1029 | endif |
| | 1030 | |
| | 1031 | ifneq ($(CONFIG_HAVE_CMC),) |
| | 1032 | IFDTOOL_FLAGS += -w $(CONFIG_CMC_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_CMC_FILE) |
| | 1033 | endif |
| | 1034 | |
| | 1035 | ifneq ($(CONFIG_X86_OPTION_ROM_ADDR),) |
| | 1036 | IFDTOOL_FLAGS += -w $(CONFIG_X86_OPTION_ROM_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_X86_OPTION_ROM_FILE) |
| | 1037 | endif |
| | 1038 | |
| | 1039 | quiet_cmd_ifdtool = IFDTOOL $@ |
| | 1040 | cmd_ifdtool = $(IFDTOOL) -c -r $(CONFIG_ROM_SIZE) u-boot.tmp; |
| | 1041 | ifneq ($(CONFIG_HAVE_INTEL_ME),) |
| | 1042 | cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_ME_FLAGS) u-boot.tmp; |
| | 1043 | endif |
| | 1044 | cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_FLAGS) u-boot.tmp; |
| | 1045 | cmd_ifdtool += mv u-boot.tmp $@ |
| | 1046 | |
| | 1047 | u-boot.rom: u-boot-x86-16bit.bin u-boot-dtb.bin |
| | 1048 | $(call if_changed,ifdtool) |
| | 1049 | |
| | 1050 | OBJCOPYFLAGS_u-boot-x86-16bit.bin := -O binary -j .start16 -j .resetvec |
| | 1051 | u-boot-x86-16bit.bin: u-boot FORCE |
| | 1052 | $(call if_changed,objcopy) |
| | 1053 | endif |
| | 1054 | |
| | 1055 | ifneq ($(CONFIG_SUNXI),) |
| | 1056 | OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \ |
| | 1057 | --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff |
| | 1058 | u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin \ |
| | 1059 | u-boot$(if $(CONFIG_OF_CONTROL),-dtb,).img FORCE |
| | 1060 | $(call if_changed,pad_cat) |
| | 1061 | endif |
| | 1062 | |
| | 1063 | ifneq ($(CONFIG_TEGRA),) |
| | 1064 | OBJCOPYFLAGS_u-boot-nodtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE) |
| | 1065 | u-boot-nodtb-tegra.bin: spl/u-boot-spl u-boot.bin FORCE |
| | 1066 | $(call if_changed,pad_cat) |
| | 1067 | |
| | 1068 | ifeq ($(CONFIG_OF_SEPARATE),y) |
| | 1069 | u-boot-dtb-tegra.bin: u-boot-nodtb-tegra.bin dts/dt.dtb FORCE |
| | 1070 | $(call if_changed,cat) |
| | 1071 | endif |
| | 1072 | endif |
| | 1073 | |
| | 1074 | u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE |
| | 1075 | $(call if_changed,cat) |
| | 1076 | |
| | 1077 | #Add a target to create boot binary having SPL binary in PBI format |
| | 1078 | #concatenated with u-boot binary. It is need by PowerPC SoC having |
| | 1079 | #internal SRAM <= 512KB. |
| | 1080 | MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \ |
| | 1081 | -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage \ |
| | 1082 | -A $(ARCH) -a $(CONFIG_SPL_TEXT_BASE) |
| | 1083 | |
| | 1084 | spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE |
| | 1085 | $(call if_changed,mkimage) |
| | 1086 | |
| | 1087 | ifeq ($(ARCH),arm) |
| | 1088 | UBOOT_BINLOAD := u-boot.img |
| | 1089 | else |
| | 1090 | UBOOT_BINLOAD := u-boot.bin |
| | 1091 | endif |
| | 1092 | |
| | 1093 | OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \ |
| | 1094 | --gap-fill=0xff |
| | 1095 | |
| | 1096 | u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE |
| | 1097 | $(call if_changed,pad_cat) |
| | 1098 | |
| | 1099 | # PPC4xx needs the SPL at the end of the image, since the reset vector |
| | 1100 | # is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target |
| | 1101 | # and need to introduce a new build target with the full blown U-Boot |
| | 1102 | # at the start padded up to the start of the SPL image. And then concat |
| | 1103 | # the SPL image to the end. |
| | 1104 | |
| | 1105 | OBJCOPYFLAGS_u-boot-img-spl-at-end.bin := -I binary -O binary \ |
| | 1106 | --pad-to=$(CONFIG_UBOOT_PAD_TO) --gap-fill=0xff |
| | 1107 | u-boot-img-spl-at-end.bin: u-boot.img spl/u-boot-spl.bin FORCE |
| | 1108 | $(call if_changed,pad_cat) |
| | 1109 | |
| | 1110 | # Create a new ELF from a raw binary file. This is useful for arm64 |
| | 1111 | # where static relocation needs to be performed on the raw binary, |
| | 1112 | # but certain simulators only accept an ELF file (but don't do the |
| | 1113 | # relocation). |
| | 1114 | # FIXME refactor dts/Makefile to share target/arch detection |
| | 1115 | u-boot.elf: u-boot.bin |
| | 1116 | @$(OBJCOPY) -B aarch64 -I binary -O elf64-littleaarch64 \ |
| | 1117 | $< u-boot-elf.o |
| | 1118 | @$(LD) u-boot-elf.o -o $@ \ |
| | 1119 | --defsym=_start=$(CONFIG_SYS_TEXT_BASE) \ |
| | 1120 | -Ttext=$(CONFIG_SYS_TEXT_BASE) |
| | 1121 | |
| | 1122 | # Rule to link u-boot |
| | 1123 | # May be overridden by arch/$(ARCH)/config.mk |
| | 1124 | quiet_cmd_u-boot__ ?= LD $@ |
| | 1125 | cmd_u-boot__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_u-boot) -o $@ \ |
| | 1126 | -T u-boot.lds $(u-boot-init) \ |
| | 1127 | --start-group $(u-boot-main) --end-group \ |
| | 1128 | $(PLATFORM_LIBS) -Map u-boot.map |
| | 1129 | |
| | 1130 | quiet_cmd_smap = GEN common/system_map.o |
| | 1131 | cmd_smap = \ |
| | 1132 | smap=`$(call SYSTEM_MAP,u-boot) | \ |
| | 1133 | awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \ |
| | 1134 | $(CC) $(c_flags) -DSYSTEM_MAP="\"$${smap}\"" \ |
| | 1135 | -c $(srctree)/common/system_map.c -o common/system_map.o |
| | 1136 | |
| | 1137 | u-boot: $(u-boot-init) $(u-boot-main) u-boot.lds |
| | 1138 | $(call if_changed,u-boot__) |
| | 1139 | ifeq ($(CONFIG_KALLSYMS),y) |
| | 1140 | $(call cmd,smap) |
| | 1141 | $(call cmd,u-boot__) common/system_map.o |
| | 1142 | endif |
| | 1143 | |
| | 1144 | # The actual objects are generated when descending, |
| | 1145 | # make sure no implicit rule kicks in |
| | 1146 | $(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ; |
| | 1147 | |
| | 1148 | # Handle descending into subdirectories listed in $(vmlinux-dirs) |
| | 1149 | # Preset locale variables to speed up the build process. Limit locale |
| | 1150 | # tweaks to this spot to avoid wrong language settings when running |
| | 1151 | # make menuconfig etc. |
| | 1152 | # Error messages still appears in the original language |
| | 1153 | |
| | 1154 | PHONY += $(u-boot-dirs) |
| | 1155 | $(u-boot-dirs): prepare scripts |
| | 1156 | $(Q)$(MAKE) $(build)=$@ |
| | 1157 | |
| | 1158 | tools: prepare |
| | 1159 | # The "tools" are needed early |
| | 1160 | $(filter-out tools, $(u-boot-dirs)): tools |
| | 1161 | # The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC |
| | 1162 | # is "yes"), so compile examples after U-Boot is compiled. |
| | 1163 | examples: $(filter-out examples, $(u-boot-dirs)) |
| | 1164 | |
| | 1165 | define filechk_uboot.release |
| | 1166 | echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" |
| | 1167 | endef |
| | 1168 | |
| | 1169 | # Store (new) UBOOTRELEASE string in include/config/uboot.release |
| | 1170 | include/config/uboot.release: include/config/auto.conf FORCE |
| | 1171 | $(call filechk,uboot.release) |
| | 1172 | |
| | 1173 | |
| | 1174 | # Things we need to do before we recursively start building the kernel |
| | 1175 | # or the modules are listed in "prepare". |
| | 1176 | # A multi level approach is used. prepareN is processed before prepareN-1. |
| | 1177 | # archprepare is used in arch Makefiles and when processed asm symlink, |
| | 1178 | # version.h and scripts_basic is processed / created. |
| | 1179 | |
| | 1180 | # Listed in dependency order |
| | 1181 | PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3 |
| | 1182 | |
| | 1183 | # prepare3 is used to check if we are building in a separate output directory, |
| | 1184 | # and if so do: |
| | 1185 | # 1) Check that make has not been executed in the kernel src $(srctree) |
| | 1186 | prepare3: include/config/uboot.release |
| | 1187 | ifneq ($(KBUILD_SRC),) |
| | 1188 | @$(kecho) ' Using $(srctree) as source for U-Boot' |
| | 1189 | $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \ |
| | 1190 | echo >&2 " $(srctree) is not clean, please run 'make mrproper'"; \ |
| | 1191 | echo >&2 " in the '$(srctree)' directory.";\ |
| | 1192 | /bin/false; \ |
| | 1193 | fi; |
| | 1194 | endif |
| | 1195 | |
| | 1196 | # prepare2 creates a makefile if using a separate output directory |
| | 1197 | prepare2: prepare3 outputmakefile |
| | 1198 | |
| | 1199 | prepare1: prepare2 $(version_h) $(timestamp_h) \ |
| | 1200 | include/config/auto.conf |
| | 1201 | ifeq ($(CONFIG_HAVE_GENERIC_BOARD),) |
| | 1202 | ifeq ($(CONFIG_SYS_GENERIC_BOARD),y) |
| | 1203 | @echo >&2 " Your architecture does not support generic board." |
| | 1204 | @echo >&2 " Please undefine CONFIG_SYS_GENERIC_BOARD in your board config file." |
| | 1205 | @/bin/false |
| | 1206 | endif |
| | 1207 | endif |
| | 1208 | ifeq ($(wildcard $(LDSCRIPT)),) |
| | 1209 | @echo >&2 " Could not find linker script." |
| | 1210 | @/bin/false |
| | 1211 | endif |
| | 1212 | |
| | 1213 | archprepare: prepare1 scripts_basic |
| | 1214 | |
| | 1215 | prepare0: archprepare FORCE |
| | 1216 | $(Q)$(MAKE) $(build)=. |
| | 1217 | |
| | 1218 | # All the preparing.. |
| | 1219 | prepare: prepare0 |
| | 1220 | |
| | 1221 | # Generate some files |
| | 1222 | # --------------------------------------------------------------------------- |
| | 1223 | |
| | 1224 | define filechk_version.h |
| | 1225 | (echo \#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \ |
| | 1226 | echo \#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \ |
| | 1227 | echo \#define CC_VERSION_STRING \"$$($(CC) --version | head -n 1)\"; \ |
| | 1228 | echo \#define LD_VERSION_STRING \"$$($(LD) --version | head -n 1)\"; ) |
| | 1229 | endef |
| | 1230 | |
| | 1231 | define filechk_timestamp.h |
| | 1232 | (LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"'; \ |
| | 1233 | LC_ALL=C date +'#define U_BOOT_TIME "%T"') |
| | 1234 | endef |
| | 1235 | |
| | 1236 | $(version_h): include/config/uboot.release FORCE |
| | 1237 | $(call filechk,version.h) |
| | 1238 | |
| | 1239 | $(timestamp_h): $(srctree)/Makefile FORCE |
| | 1240 | $(call filechk,timestamp.h) |
| | 1241 | |
| | 1242 | # --------------------------------------------------------------------------- |
| | 1243 | |
| | 1244 | PHONY += depend dep |
| | 1245 | depend dep: |
| | 1246 | @echo '*** Warning: make $@ is unnecessary now.' |
| | 1247 | |
| | 1248 | # --------------------------------------------------------------------------- |
| | 1249 | quiet_cmd_cpp_lds = LDS $@ |
| | 1250 | cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \ |
| | 1251 | -D__ASSEMBLY__ -x assembler-with-cpp -P -o $@ $< |
| | 1252 | |
| | 1253 | u-boot.lds: $(LDSCRIPT) prepare FORCE |
| | 1254 | $(call if_changed_dep,cpp_lds) |
| | 1255 | |
| | 1256 | spl/u-boot-spl.bin: spl/u-boot-spl |
| | 1257 | @: |
| | 1258 | spl/u-boot-spl: tools prepare |
| | 1259 | $(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all |
| | 1260 | |
| | 1261 | spl/sunxi-spl.bin: spl/u-boot-spl |
| | 1262 | @: |
| | 1263 | |
| | 1264 | tpl/u-boot-tpl.bin: tools prepare |
| | 1265 | $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all |
| | 1266 | |
| | 1267 | TAG_SUBDIRS := $(patsubst %,$(srctree)/%,$(u-boot-dirs) include) |
| | 1268 | |
| | 1269 | FIND := find |
| | 1270 | FINDFLAGS := -L |
| | 1271 | |
| | 1272 | tags ctags: |
| | 1273 | ctags -w -o ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \ |
| | 1274 | -name '*.[chS]' -print` |
| | 1275 | |
| | 1276 | etags: |
| | 1277 | etags -a -o etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \ |
| | 1278 | -name '*.[chS]' -print` |
| | 1279 | cscope: |
| | 1280 | $(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \ |
| | 1281 | cscope.files |
| | 1282 | cscope -b -q -k |
| | 1283 | |
| | 1284 | SYSTEM_MAP = \ |
| | 1285 | $(NM) $1 | \ |
| | 1286 | grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \ |
| | 1287 | LC_ALL=C sort |
| | 1288 | System.map: u-boot |
| | 1289 | @$(call SYSTEM_MAP,$<) > $@ |
| | 1290 | |
| | 1291 | checkdtc: |
| | 1292 | @if test $(call dtc-version) -lt 0104; then \ |
| | 1293 | echo '*** Your dtc is too old, please upgrade to dtc 1.4 or newer'; \ |
| | 1294 | false; \ |
| | 1295 | fi |
| | 1296 | |
| | 1297 | ######################################################################### |
| | 1298 | |
| | 1299 | # ARM relocations should all be R_ARM_RELATIVE (32-bit) or |
| | 1300 | # R_AARCH64_RELATIVE (64-bit). |
| | 1301 | checkarmreloc: u-boot |
| | 1302 | @RELOC="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \ |
| | 1303 | grep R_A | sort -u`"; \ |
| | 1304 | if test "$$RELOC" != "R_ARM_RELATIVE" -a \ |
| | 1305 | "$$RELOC" != "R_AARCH64_RELATIVE"; then \ |
| | 1306 | echo "$< contains unexpected relocations: $$RELOC"; \ |
| | 1307 | false; \ |
| | 1308 | fi |
| | 1309 | |
| | 1310 | env: scripts_basic |
| | 1311 | $(Q)$(MAKE) $(build)=tools/$@ |
| | 1312 | |
| | 1313 | tools-only: scripts_basic $(version_h) $(timestamp_h) |
| | 1314 | $(Q)$(MAKE) $(build)=tools |
| | 1315 | |
| | 1316 | tools-all: export HOST_TOOLS_ALL=y |
| | 1317 | tools-all: env tools ; |
| | 1318 | |
| | 1319 | cross_tools: export CROSS_BUILD_TOOLS=y |
| | 1320 | cross_tools: tools ; |
| | 1321 | |
| | 1322 | .PHONY : CHANGELOG |
| | 1323 | CHANGELOG: |
| | 1324 | git log --no-merges U-Boot-1_1_5.. | \ |
| | 1325 | unexpand -a | sed -e 's/\s\s*$$//' > $@ |
| | 1326 | |
| | 1327 | include/license.h: tools/bin2header COPYING |
| | 1328 | cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h |
| | 1329 | ######################################################################### |
| | 1330 | |
| | 1331 | ### |
| | 1332 | # Cleaning is done on three levels. |
| | 1333 | # make clean Delete most generated files |
| | 1334 | # Leave enough to build external modules |
| | 1335 | # make mrproper Delete the current configuration, and all generated files |
| | 1336 | # make distclean Remove editor backup files, patch leftover files and the like |
| | 1337 | |
| | 1338 | # Directories & files removed with 'make clean' |
| | 1339 | CLEAN_DIRS += $(MODVERDIR) \ |
| | 1340 | $(foreach d, spl tpl, $(patsubst %,$d/%, \ |
| | 1341 | $(filter-out include, $(shell ls -1 $d 2>/dev/null)))) |
| | 1342 | |
| | 1343 | CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h \ |
| | 1344 | boot* u-boot* MLO* SPL System.map |
| | 1345 | |
| | 1346 | # Directories & files removed with 'make mrproper' |
| | 1347 | MRPROPER_DIRS += include/config include/generated spl tpl \ |
| | 1348 | .tmp_objdiff |
| | 1349 | MRPROPER_FILES += .config .config.old include/autoconf.mk* include/config.h \ |
| | 1350 | ctags etags TAGS cscope* GPATH GTAGS GRTAGS GSYMS |
| | 1351 | |
| | 1352 | # clean - Delete most, but leave enough to build external modules |
| | 1353 | # |
| | 1354 | clean: rm-dirs := $(CLEAN_DIRS) |
| | 1355 | clean: rm-files := $(CLEAN_FILES) |
| | 1356 | |
| | 1357 | clean-dirs := $(foreach f,$(u-boot-alldirs),$(if $(wildcard $(srctree)/$f/Makefile),$f)) |
| | 1358 | |
| | 1359 | clean-dirs := $(addprefix _clean_, $(clean-dirs) doc/DocBook) |
| | 1360 | |
| | 1361 | PHONY += $(clean-dirs) clean archclean |
| | 1362 | $(clean-dirs): |
| | 1363 | $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@) |
| | 1364 | |
| | 1365 | # TODO: Do not use *.cfgtmp |
| | 1366 | clean: $(clean-dirs) |
| | 1367 | $(call cmd,rmdirs) |
| | 1368 | $(call cmd,rmfiles) |
| | 1369 | @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \ |
| | 1370 | \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \ |
| | 1371 | -o -name '*.ko.*' -o -name '*.su' -o -name '*.cfgtmp' \ |
| | 1372 | -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \ |
| | 1373 | -o -name '*.symtypes' -o -name 'modules.order' \ |
| | 1374 | -o -name modules.builtin -o -name '.tmp_*.o.*' \ |
| | 1375 | -o -name '*.gcno' \) -type f -print | xargs rm -f |
| | 1376 | |
| | 1377 | # mrproper - Delete all generated files, including .config |
| | 1378 | # |
| | 1379 | mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS)) |
| | 1380 | mrproper: rm-files := $(wildcard $(MRPROPER_FILES)) |
| | 1381 | mrproper-dirs := $(addprefix _mrproper_,scripts) |
| | 1382 | |
| | 1383 | PHONY += $(mrproper-dirs) mrproper archmrproper |
| | 1384 | $(mrproper-dirs): |
| | 1385 | $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@) |
| | 1386 | |
| | 1387 | mrproper: clean $(mrproper-dirs) |
| | 1388 | $(call cmd,rmdirs) |
| | 1389 | $(call cmd,rmfiles) |
| | 1390 | @rm -f arch/*/include/asm/arch |
| | 1391 | |
| | 1392 | # distclean |
| | 1393 | # |
| | 1394 | PHONY += distclean |
| | 1395 | |
| | 1396 | distclean: mrproper |
| | 1397 | @find $(srctree) $(RCS_FIND_IGNORE) \ |
| | 1398 | \( -name '*.orig' -o -name '*.rej' -o -name '*~' \ |
| | 1399 | -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \ |
| | 1400 | -o -name '.*.rej' -o -name '*%' -o -name 'core' \ |
| | 1401 | -o -name '*.pyc' \) \ |
| | 1402 | -type f -print | xargs rm -f |
| | 1403 | @rm -f boards.cfg |
| | 1404 | |
| | 1405 | backup: |
| | 1406 | F=`basename $(srctree)` ; cd .. ; \ |
| | 1407 | gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F |
| | 1408 | |
| | 1409 | help: |
| | 1410 | @echo 'Cleaning targets:' |
| | 1411 | @echo ' clean - Remove most generated files but keep the config' |
| | 1412 | @echo ' mrproper - Remove all generated files + config + various backup files' |
| | 1413 | @echo ' distclean - mrproper + remove editor backup and patch files' |
| | 1414 | @echo '' |
| | 1415 | @echo 'Configuration targets:' |
| | 1416 | @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help |
| | 1417 | @echo '' |
| | 1418 | @echo 'Other generic targets:' |
| | 1419 | @echo ' all - Build all necessary images depending on configuration' |
| | 1420 | @echo '* u-boot - Build the bare u-boot' |
| | 1421 | @echo ' dir/ - Build all files in dir and below' |
| | 1422 | @echo ' dir/file.[oisS] - Build specified target only' |
| | 1423 | @echo ' dir/file.lst - Build specified mixed source/assembly target only' |
| | 1424 | @echo ' (requires a recent binutils and recent build (System.map))' |
| | 1425 | @echo ' tags/ctags - Generate ctags file for editors' |
| | 1426 | @echo ' etags - Generate etags file for editors' |
| | 1427 | @echo ' cscope - Generate cscope index' |
| | 1428 | @echo ' ubootrelease - Output the release version string (use with make -s)' |
| | 1429 | @echo ' ubootversion - Output the version stored in Makefile (use with make -s)' |
| | 1430 | @echo '' |
| | 1431 | @echo 'Static analysers' |
| | 1432 | @echo ' checkstack - Generate a list of stack hogs' |
| | 1433 | @echo '' |
| | 1434 | @echo 'Documentation targets:' |
| | 1435 | @$(MAKE) -f $(srctree)/doc/DocBook/Makefile dochelp |
| | 1436 | @echo '' |
| | 1437 | @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build' |
| | 1438 | @echo ' make V=2 [targets] 2 => give reason for rebuild of target' |
| | 1439 | @echo ' make O=dir [targets] Locate all output files in "dir", including .config' |
| | 1440 | @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)' |
| | 1441 | @echo ' make C=2 [targets] Force check of all c source with $$CHECK' |
| | 1442 | @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections' |
| | 1443 | @echo ' make W=n [targets] Enable extra gcc checks, n=1,2,3 where' |
| | 1444 | @echo ' 1: warnings which may be relevant and do not occur too often' |
| | 1445 | @echo ' 2: warnings which occur quite often but may still be relevant' |
| | 1446 | @echo ' 3: more obscure warnings, can most likely be ignored' |
| | 1447 | @echo ' Multiple levels can be combined with W=12 or W=123' |
| | 1448 | @echo '' |
| | 1449 | @echo 'Execute "make" or "make all" to build all targets marked with [*] ' |
| | 1450 | @echo 'For further info see the ./README file' |
| | 1451 | |
| | 1452 | |
| | 1453 | # Documentation targets |
| | 1454 | # --------------------------------------------------------------------------- |
| | 1455 | %docs: scripts_basic FORCE |
| | 1456 | $(Q)$(MAKE) $(build)=scripts build_docproc |
| | 1457 | $(Q)$(MAKE) $(build)=doc/DocBook $@ |
| | 1458 | |
| | 1459 | # Dummies... |
| | 1460 | PHONY += prepare scripts |
| | 1461 | prepare: ; |
| | 1462 | scripts: ; |
| | 1463 | |
| | 1464 | endif #ifeq ($(config-targets),1) |
| | 1465 | endif #ifeq ($(mixed-targets),1) |
| | 1466 | |
| | 1467 | PHONY += checkstack ubootrelease ubootversion |
| | 1468 | |
| | 1469 | checkstack: |
| | 1470 | $(OBJDUMP) -d u-boot $$(find . -name u-boot-spl) | \ |
| | 1471 | $(PERL) $(src)/scripts/checkstack.pl $(ARCH) |
| | 1472 | |
| | 1473 | ubootrelease: |
| | 1474 | @echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" |
| | 1475 | |
| | 1476 | ubootversion: |
| | 1477 | @echo $(UBOOTVERSION) |
| | 1478 | |
| | 1479 | # Single targets |
| | 1480 | # --------------------------------------------------------------------------- |
| | 1481 | # Single targets are compatible with: |
| | 1482 | # - build with mixed source and output |
| | 1483 | # - build with separate output dir 'make O=...' |
| | 1484 | # - external modules |
| | 1485 | # |
| | 1486 | # target-dir => where to store outputfile |
| | 1487 | # build-dir => directory in kernel source tree to use |
| | 1488 | |
| | 1489 | ifeq ($(KBUILD_EXTMOD),) |
| | 1490 | build-dir = $(patsubst %/,%,$(dir $@)) |
| | 1491 | target-dir = $(dir $@) |
| | 1492 | else |
| | 1493 | zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@))) |
| | 1494 | build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash)) |
| | 1495 | target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@)) |
| | 1496 | endif |
| | 1497 | |
| | 1498 | %.s: %.c prepare scripts FORCE |
| | 1499 | $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) |
| | 1500 | %.i: %.c prepare scripts FORCE |
| | 1501 | $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) |
| | 1502 | %.o: %.c prepare scripts FORCE |
| | 1503 | $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) |
| | 1504 | %.lst: %.c prepare scripts FORCE |
| | 1505 | $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) |
| | 1506 | %.s: %.S prepare scripts FORCE |
| | 1507 | $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) |
| | 1508 | %.o: %.S prepare scripts FORCE |
| | 1509 | $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) |
| | 1510 | %.symtypes: %.c prepare scripts FORCE |
| | 1511 | $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) |
| | 1512 | |
| | 1513 | # Modules |
| | 1514 | /: prepare scripts FORCE |
| | 1515 | $(cmd_crmodverdir) |
| | 1516 | $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \ |
| | 1517 | $(build)=$(build-dir) |
| | 1518 | %/: prepare scripts FORCE |
| | 1519 | $(cmd_crmodverdir) |
| | 1520 | $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \ |
| | 1521 | $(build)=$(build-dir) |
| | 1522 | %.ko: prepare scripts FORCE |
| | 1523 | $(cmd_crmodverdir) |
| | 1524 | $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \ |
| | 1525 | $(build)=$(build-dir) $(@:.ko=.o) |
| | 1526 | $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost |
| | 1527 | |
| | 1528 | # FIXME Should go into a make.lib or something |
| | 1529 | # =========================================================================== |
| | 1530 | |
| | 1531 | quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs))) |
| | 1532 | cmd_rmdirs = rm -rf $(rm-dirs) |
| | 1533 | |
| | 1534 | quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files))) |
| | 1535 | cmd_rmfiles = rm -f $(rm-files) |
| | 1536 | |
| | 1537 | # read all saved command lines |
| | 1538 | |
| | 1539 | targets := $(wildcard $(sort $(targets))) |
| | 1540 | cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd)) |
| | 1541 | |
| | 1542 | ifneq ($(cmd_files),) |
| | 1543 | $(cmd_files): ; # Do not try to update included dependency files |
| | 1544 | include $(cmd_files) |
| | 1545 | endif |
| | 1546 | |
| | 1547 | # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir |
| | 1548 | # Usage: |
| | 1549 | # $(Q)$(MAKE) $(clean)=dir |
| | 1550 | clean := -f $(srctree)/scripts/Makefile.clean obj |
| | 1551 | |
| | 1552 | endif # skip-makefile |
| | 1553 | |
| | 1554 | PHONY += FORCE |
| | 1555 | FORCE: |
| | 1556 | |
| | 1557 | # Declare the contents of the .PHONY variable as phony. We keep that |
| | 1558 | # information in a variable so we can use it in if_changed and friends. |
| | 1559 | .PHONY: $(PHONY) |
projects / thirdparty / u-boot.git / blame_incremental