| | 1 | CONFIG_ARM=y |
| | 2 | CONFIG_ARCH_CPU_INIT=y |
| | 3 | CONFIG_ARCH_AT91=y |
| | 4 | CONFIG_SYS_TEXT_BASE=0x26f00000 |
| | 5 | CONFIG_TARGET_SAMA5D3XEK=y |
| | 6 | CONFIG_SPL_GPIO_SUPPORT=y |
| | 7 | CONFIG_SPL_LIBCOMMON_SUPPORT=y |
| | 8 | CONFIG_SPL_LIBGENERIC_SUPPORT=y |
| | 9 | CONFIG_SYS_MALLOC_F_LEN=0x2000 |
| | 10 | CONFIG_ENV_SIZE=0x2000 |
| | 11 | CONFIG_ENV_OFFSET=0x6000 |
| | 12 | CONFIG_ENV_SECT_SIZE=0x1000 |
| | 13 | CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000 |
| | 14 | CONFIG_DM_GPIO=y |
| | 15 | CONFIG_SPL_SERIAL_SUPPORT=y |
| | 16 | CONFIG_SPL_DRIVERS_MISC_SUPPORT=y |
| | 17 | CONFIG_NR_DRAM_BANKS=1 |
| | 18 | CONFIG_SPL=y |
| | 19 | CONFIG_DEBUG_UART_BOARD_INIT=y |
| | 20 | CONFIG_DEBUG_UART_BASE=0xffffee00 |
| | 21 | CONFIG_DEBUG_UART_CLOCK=132000000 |
| | 22 | CONFIG_SPL_SPI_FLASH_SUPPORT=y |
| | 23 | CONFIG_SPL_SPI_SUPPORT=y |
| | 24 | CONFIG_SPL_TEXT_BASE=0x300000 |
| | 25 | CONFIG_DEBUG_UART=y |
| | 26 | CONFIG_ENV_VARS_UBOOT_CONFIG=y |
| | 27 | CONFIG_FIT=y |
| | 28 | CONFIG_SPI_BOOT=y |
| | 29 | CONFIG_BOOTDELAY=3 |
| | 30 | CONFIG_USE_BOOTARGS=y |
| | 31 | CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256K(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs" |
| | 32 | # CONFIG_DISPLAY_BOARDINFO is not set |
| | 33 | CONFIG_SPL_SPI_LOAD=y |
| | 34 | CONFIG_HUSH_PARSER=y |
| | 35 | CONFIG_CMD_BOOTZ=y |
| | 36 | # CONFIG_CMD_IMI is not set |
| | 37 | # CONFIG_CMD_FLASH is not set |
| | 38 | # CONFIG_CMD_LOADS is not set |
| | 39 | CONFIG_CMD_MMC=y |
| | 40 | CONFIG_CMD_NAND=y |
| | 41 | CONFIG_CMD_NAND_TRIMFFS=y |
| | 42 | CONFIG_CMD_USB=y |
| | 43 | CONFIG_CMD_DHCP=y |
| | 44 | CONFIG_CMD_MII=y |
| | 45 | CONFIG_CMD_PING=y |
| | 46 | CONFIG_CMD_FAT=y |
| | 47 | CONFIG_OF_CONTROL=y |
| | 48 | CONFIG_SPL_OF_CONTROL=y |
| | 49 | CONFIG_DEFAULT_DEVICE_TREE="sama5d36ek" |
| | 50 | CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dmas dma-names" |
| | 51 | CONFIG_ENV_IS_IN_SPI_FLASH=y |
| | 52 | CONFIG_SYS_RELOC_GD_ENV_ADDR=y |
| | 53 | CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y |
| | 54 | CONFIG_DM=y |
| | 55 | CONFIG_SPL_DM=y |
| | 56 | CONFIG_SPL_DM_SEQ_ALIAS=y |
| | 57 | CONFIG_CLK=y |
| | 58 | CONFIG_SPL_CLK=y |
| | 59 | CONFIG_CLK_AT91=y |
| | 60 | CONFIG_AT91_UTMI=y |
| | 61 | CONFIG_AT91_H32MX=y |
| | 62 | CONFIG_AT91_GPIO=y |
| | 63 | CONFIG_DM_MMC=y |
| | 64 | CONFIG_GENERIC_ATMEL_MCI=y |
| | 65 | CONFIG_MTD=y |
| | 66 | CONFIG_MTD_NOR_FLASH=y |
| | 67 | CONFIG_FLASH_CFI_DRIVER=y |
| | 68 | CONFIG_SYS_FLASH_PROTECTION=y |
| | 69 | CONFIG_SYS_FLASH_CFI=y |
| | 70 | CONFIG_MTD_RAW_NAND=y |
| | 71 | # CONFIG_SYS_NAND_USE_FLASH_BBT is not set |
| | 72 | CONFIG_NAND_ATMEL=y |
| | 73 | CONFIG_DM_SPI_FLASH=y |
| | 74 | CONFIG_SF_DEFAULT_SPEED=30000000 |
| | 75 | CONFIG_SPI_FLASH_ATMEL=y |
| | 76 | CONFIG_DM_ETH=y |
| | 77 | CONFIG_MACB=y |
| | 78 | CONFIG_PINCTRL=y |
| | 79 | CONFIG_SPL_PINCTRL=y |
| | 80 | CONFIG_PINCTRL_AT91=y |
| | 81 | CONFIG_DM_SERIAL=y |
| | 82 | CONFIG_DEBUG_UART_ATMEL=y |
| | 83 | CONFIG_DEBUG_UART_ANNOUNCE=y |
| | 84 | CONFIG_ATMEL_USART=y |
| | 85 | CONFIG_SPI=y |
| | 86 | CONFIG_DM_SPI=y |
| | 87 | CONFIG_TIMER=y |
| | 88 | CONFIG_SPL_TIMER=y |
| | 89 | CONFIG_ATMEL_PIT_TIMER=y |
| | 90 | CONFIG_USB=y |
| | 91 | CONFIG_DM_USB=y |
| | 92 | CONFIG_USB_EHCI_HCD=y |
| | 93 | CONFIG_USB_STORAGE=y |
| | 94 | CONFIG_USB_GADGET=y |
| | 95 | CONFIG_USB_GADGET_ATMEL_USBA=y |
| | 96 | CONFIG_DM_VIDEO=y |
| | 97 | CONFIG_ATMEL_HLCD=y |
| | 98 | CONFIG_FAT_WRITE=y |
projects / thirdparty / u-boot.git / blame_incremental