[people/ms/u-boot.git] / include / configs / mx6sabre_common.h

/*
 * Copyright (C) 2012 Freescale Semiconductor, Inc.
 *
 * Configuration settings for the Freescale i.MX6Q SabreSD board.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __MX6QSABRE_COMMON_CONFIG_H
#define __MX6QSABRE_COMMON_CONFIG_H

#include "mx6_common.h"

#define CONFIG_IMX_THERMAL

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)

#define CONFIG_MXC_UART

/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR      0

#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RGMII
#define CONFIG_ETHPRIME			"FEC"
#define CONFIG_FEC_MXC_PHYADDR		1

#define CONFIG_PHYLIB
#define CONFIG_PHY_ATHEROS

#ifdef CONFIG_CMD_SF
#define CONFIG_MXC_SPI
#define CONFIG_SF_DEFAULT_BUS		0
#define CONFIG_SF_DEFAULT_CS		0
#define CONFIG_SF_DEFAULT_SPEED		20000000
#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
#endif

#ifdef CONFIG_SUPPORT_EMMC_BOOT
#define EMMC_ENV \
	"emmcdev=2\0" \
	"update_emmc_firmware=" \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"if ${get_cmd} ${update_sd_firmware_filename}; then " \
			"if mmc dev ${emmcdev} 1; then "	\
				"setexpr fw_sz ${filesize} / 0x200; " \
				"setexpr fw_sz ${fw_sz} + 1; "	\
				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
			"fi; "	\
		"fi\0"
#else
#define EMMC_ENV ""
#endif

#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG

#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=boot.scr\0" \
	"image=zImage\0" \
	"fdt_file=undefined\0" \
	"fdt_addr=0x18000000\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"console=" CONSOLE_DEV "\0" \
	"dfuspi=dfu 0 sf 0:0:10000000:0\0" \
	"dfu_alt_info_spl=spl raw 0x400\0" \
	"dfu_alt_info_img=u-boot raw 0x10000\0" \
	"dfu_alt_info=spl raw 0x400\0" \
	"fdt_high=0xffffffff\0"	  \
	"initrd_high=0xffffffff\0" \
	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
	"mmcpart=1\0" \
	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	"update_sd_firmware=" \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"if mmc dev ${mmcdev}; then "	\
			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
				"setexpr fw_sz ${filesize} / 0x200; " \
				"setexpr fw_sz ${fw_sz} + 1; "	\
				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
			"fi; "	\
		"fi\0" \
	EMMC_ENV	  \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot}\0" \
	"loadbootscript=" \
		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source\0" \
	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs " \
		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	"netboot=echo Booting from net ...; " \
		"run netargs; " \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${image}; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0" \
		"findfdt="\
			"if test $fdt_file = undefined; then " \
				"if test $board_name = SABREAUTO && test $board_rev = MX6QP; then " \
					"setenv fdt_file imx6qp-sabreauto.dtb; fi; " \
				"if test $board_name = SABREAUTO && test $board_rev = MX6Q; then " \
					"setenv fdt_file imx6q-sabreauto.dtb; fi; " \
				"if test $board_name = SABREAUTO && test $board_rev = MX6DL; then " \
					"setenv fdt_file imx6dl-sabreauto.dtb; fi; " \
				"if test $board_name = SABRESD && test $board_rev = MX6QP; then " \
					"setenv fdt_file imx6qp-sabresd.dtb; fi; " \
				"if test $board_name = SABRESD && test $board_rev = MX6Q; then " \
					"setenv fdt_file imx6q-sabresd.dtb; fi; " \
				"if test $board_name = SABRESD && test $board_rev = MX6DL; then " \
					"setenv fdt_file imx6dl-sabresd.dtb; fi; " \
				"if test $fdt_file = undefined; then " \
					"echo WARNING: Could not determine dtb to use; fi; " \
			"fi;\0" \

#define CONFIG_BOOTCOMMAND \
	"run findfdt;" \
	"mmc dev ${mmcdev};" \
	"if mmc rescan; then " \
		"if run loadbootscript; then " \
		"run bootscript; " \
		"else " \
			"if run loadimage; then " \
				"run mmcboot; " \
			"else run netboot; " \
			"fi; " \
		"fi; " \
	"else run netboot; fi"

#define CONFIG_ARP_TIMEOUT     200UL

#define CONFIG_SYS_MEMTEST_START       0x10000000
#define CONFIG_SYS_MEMTEST_END         0x10010000
#define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS           1
#define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* Environment organization */
#define CONFIG_ENV_SIZE			(8 * 1024)

#define CONFIG_ENV_IS_IN_MMC

#if defined(CONFIG_ENV_IS_IN_MMC)
#define CONFIG_ENV_OFFSET		(768 * 1024)
#endif

/* Framebuffer */
#define CONFIG_VIDEO_IPUV3
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#ifdef CONFIG_MX6DL
#define CONFIG_IPUV3_CLK 198000000
#else
#define CONFIG_IPUV3_CLK 264000000
#endif
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP

#ifndef CONFIG_SPL
#define CONFIG_USBD_HS

#define CONFIG_USB_FUNCTION_MASS_STORAGE

#define CONFIG_USB_FUNCTION_FASTBOOT
#define CONFIG_CMD_FASTBOOT
#define CONFIG_ANDROID_BOOT_IMAGE
#define CONFIG_FASTBOOT_BUF_ADDR   CONFIG_SYS_LOAD_ADDR
#define CONFIG_FASTBOOT_BUF_SIZE   0x07000000
#endif

#endif                         /* __MX6QSABRE_COMMON_CONFIG_H */
Commit	Line	Data
	1	/*
	2	* Copyright (C) 2012 Freescale Semiconductor, Inc.
	3	*
	4	* Configuration settings for the Freescale i.MX6Q SabreSD board.
	5	*
	6	* SPDX-License-Identifier: GPL-2.0+
	7	*/
	8
	9	#ifndef __MX6QSABRE_COMMON_CONFIG_H
	10	#define __MX6QSABRE_COMMON_CONFIG_H
	11
	12	#include "mx6_common.h"
	13
	14	#define CONFIG_IMX_THERMAL
	15
	16	/* Size of malloc() pool */
	17	#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
	18
	19	#define CONFIG_MXC_UART
	20
	21	/* MMC Configs */
	22	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	23
	24	#define CONFIG_FEC_MXC
	25	#define CONFIG_MII
	26	#define IMX_FEC_BASE ENET_BASE_ADDR
	27	#define CONFIG_FEC_XCV_TYPE RGMII
	28	#define CONFIG_ETHPRIME "FEC"
	29	#define CONFIG_FEC_MXC_PHYADDR 1
	30
	31	#define CONFIG_PHYLIB
	32	#define CONFIG_PHY_ATHEROS
	33
	34	#ifdef CONFIG_CMD_SF
	35	#define CONFIG_MXC_SPI
	36	#define CONFIG_SF_DEFAULT_BUS 0
	37	#define CONFIG_SF_DEFAULT_CS 0
	38	#define CONFIG_SF_DEFAULT_SPEED 20000000
	39	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
	40	#endif
	41
	42	#ifdef CONFIG_SUPPORT_EMMC_BOOT
	43	#define EMMC_ENV \
	44	"emmcdev=2\0" \
	45	"update_emmc_firmware=" \
	46	"if test ${ip_dyn} = yes; then " \
	47	"setenv get_cmd dhcp; " \
	48	"else " \
	49	"setenv get_cmd tftp; " \
	50	"fi; " \
	51	"if ${get_cmd} ${update_sd_firmware_filename}; then " \
	52	"if mmc dev ${emmcdev} 1; then " \
	53	"setexpr fw_sz ${filesize} / 0x200; " \
	54	"setexpr fw_sz ${fw_sz} + 1; " \
	55	"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
	56	"fi; " \
	57	"fi\0"
	58	#else
	59	#define EMMC_ENV ""
	60	#endif
	61
	62	#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
	63
	64	#define CONFIG_EXTRA_ENV_SETTINGS \
	65	"script=boot.scr\0" \
	66	"image=zImage\0" \
	67	"fdt_file=undefined\0" \
	68	"fdt_addr=0x18000000\0" \
	69	"boot_fdt=try\0" \
	70	"ip_dyn=yes\0" \
	71	"console=" CONSOLE_DEV "\0" \
	72	"dfuspi=dfu 0 sf 0:0:10000000:0\0" \
	73	"dfu_alt_info_spl=spl raw 0x400\0" \
	74	"dfu_alt_info_img=u-boot raw 0x10000\0" \
	75	"dfu_alt_info=spl raw 0x400\0" \
	76	"fdt_high=0xffffffff\0" \
	77	"initrd_high=0xffffffff\0" \
	78	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
	79	"mmcpart=1\0" \
	80	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	81	"update_sd_firmware=" \
	82	"if test ${ip_dyn} = yes; then " \
	83	"setenv get_cmd dhcp; " \
	84	"else " \
	85	"setenv get_cmd tftp; " \
	86	"fi; " \
	87	"if mmc dev ${mmcdev}; then " \
	88	"if ${get_cmd} ${update_sd_firmware_filename}; then " \
	89	"setexpr fw_sz ${filesize} / 0x200; " \
	90	"setexpr fw_sz ${fw_sz} + 1; " \
	91	"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
	92	"fi; " \
	93	"fi\0" \
	94	EMMC_ENV \
	95	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	96	"root=${mmcroot}\0" \
	97	"loadbootscript=" \
	98	"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	99	"bootscript=echo Running bootscript from mmc ...; " \
	100	"source\0" \
	101	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	102	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	103	"mmcboot=echo Booting from mmc ...; " \
	104	"run mmcargs; " \
	105	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	106	"if run loadfdt; then " \
	107	"bootz ${loadaddr} - ${fdt_addr}; " \
	108	"else " \
	109	"if test ${boot_fdt} = try; then " \
	110	"bootz; " \
	111	"else " \
	112	"echo WARN: Cannot load the DT; " \
	113	"fi; " \
	114	"fi; " \
	115	"else " \
	116	"bootz; " \
	117	"fi;\0" \
	118	"netargs=setenv bootargs console=${console},${baudrate} " \
	119	"root=/dev/nfs " \
	120	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	121	"netboot=echo Booting from net ...; " \
	122	"run netargs; " \
	123	"if test ${ip_dyn} = yes; then " \
	124	"setenv get_cmd dhcp; " \
	125	"else " \
	126	"setenv get_cmd tftp; " \
	127	"fi; " \
	128	"${get_cmd} ${image}; " \
	129	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	130	"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
	131	"bootz ${loadaddr} - ${fdt_addr}; " \
	132	"else " \
	133	"if test ${boot_fdt} = try; then " \
	134	"bootz; " \
	135	"else " \
	136	"echo WARN: Cannot load the DT; " \
	137	"fi; " \
	138	"fi; " \
	139	"else " \
	140	"bootz; " \
	141	"fi;\0" \
	142	"findfdt="\
	143	"if test $fdt_file = undefined; then " \
	144	"if test $board_name = SABREAUTO && test $board_rev = MX6QP; then " \
	145	"setenv fdt_file imx6qp-sabreauto.dtb; fi; " \
	146	"if test $board_name = SABREAUTO && test $board_rev = MX6Q; then " \
	147	"setenv fdt_file imx6q-sabreauto.dtb; fi; " \
	148	"if test $board_name = SABREAUTO && test $board_rev = MX6DL; then " \
	149	"setenv fdt_file imx6dl-sabreauto.dtb; fi; " \
	150	"if test $board_name = SABRESD && test $board_rev = MX6QP; then " \
	151	"setenv fdt_file imx6qp-sabresd.dtb; fi; " \
	152	"if test $board_name = SABRESD && test $board_rev = MX6Q; then " \
	153	"setenv fdt_file imx6q-sabresd.dtb; fi; " \
	154	"if test $board_name = SABRESD && test $board_rev = MX6DL; then " \
	155	"setenv fdt_file imx6dl-sabresd.dtb; fi; " \
	156	"if test $fdt_file = undefined; then " \
	157	"echo WARNING: Could not determine dtb to use; fi; " \
	158	"fi;\0" \
	159
	160	#define CONFIG_BOOTCOMMAND \
	161	"run findfdt;" \
	162	"mmc dev ${mmcdev};" \
	163	"if mmc rescan; then " \
	164	"if run loadbootscript; then " \
	165	"run bootscript; " \
	166	"else " \
	167	"if run loadimage; then " \
	168	"run mmcboot; " \
	169	"else run netboot; " \
	170	"fi; " \
	171	"fi; " \
	172	"else run netboot; fi"
	173
	174	#define CONFIG_ARP_TIMEOUT 200UL
	175
	176	#define CONFIG_SYS_MEMTEST_START 0x10000000
	177	#define CONFIG_SYS_MEMTEST_END 0x10010000
	178	#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
	179
	180	/* Physical Memory Map */
	181	#define CONFIG_NR_DRAM_BANKS 1
	182	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	183
	184	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	185	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	186	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	187
	188	#define CONFIG_SYS_INIT_SP_OFFSET \
	189	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	190	#define CONFIG_SYS_INIT_SP_ADDR \
	191	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	192
	193	/* Environment organization */
	194	#define CONFIG_ENV_SIZE (8 * 1024)
	195
	196	#define CONFIG_ENV_IS_IN_MMC
	197
	198	#if defined(CONFIG_ENV_IS_IN_MMC)
	199	#define CONFIG_ENV_OFFSET (768 * 1024)
	200	#endif
	201
	202	/* Framebuffer */
	203	#define CONFIG_VIDEO_IPUV3
	204	#define CONFIG_VIDEO_BMP_RLE8
	205	#define CONFIG_SPLASH_SCREEN
	206	#define CONFIG_SPLASH_SCREEN_ALIGN
	207	#define CONFIG_BMP_16BPP
	208	#define CONFIG_VIDEO_LOGO
	209	#define CONFIG_VIDEO_BMP_LOGO
	210	#ifdef CONFIG_MX6DL
	211	#define CONFIG_IPUV3_CLK 198000000
	212	#else
	213	#define CONFIG_IPUV3_CLK 264000000
	214	#endif
	215	#define CONFIG_IMX_HDMI
	216	#define CONFIG_IMX_VIDEO_SKIP
	217
	218	#ifndef CONFIG_SPL
	219	#define CONFIG_USBD_HS
	220
	221	#define CONFIG_USB_FUNCTION_MASS_STORAGE
	222
	223	#define CONFIG_USB_FUNCTION_FASTBOOT
	224	#define CONFIG_CMD_FASTBOOT
	225	#define CONFIG_ANDROID_BOOT_IMAGE
	226	#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
	227	#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000
	228	#endif
	229
	230	#endif /* __MX6QSABRE_COMMON_CONFIG_H */