[people/ms/u-boot.git] / include / configs / nas220.h

/*
 * Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com>
 *
 * based on work from:
 * (C) Copyright 2009
 * Marvell Semiconductor <www.marvell.com>
 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef _CONFIG_NAS220_H
#define _CONFIG_NAS220_H

/*
 * Machine type ID
 */
#define CONFIG_MACH_TYPE		MACH_TYPE_RD88F6192_NAS

/*
 * High Level Configuration Options (easy to change)
 */
#define CONFIG_FEROCEON_88FR131		/* #define CPU Core subversion */
#define CONFIG_KW88F6192		/* SOC Name */
#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */

/* power-on led, regulator, sata0, sata1 */
#define NAS220_GE_OE_VAL_LOW ((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28))
#define NAS220_GE_OE_VAL_HIGH (0)
#define NAS220_GE_OE_LOW (~((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28)))
#define NAS220_GE_OE_HIGH (~(0))

/* PHY related */
#define MV88E1116_LED_FCTRL_REG		10
#define MV88E1116_CPRSP_CR3_REG		21
#define MV88E1116_MAC_CTRL_REG		21
#define MV88E1116_PGADR_REG		22
#define MV88E1116_RGMII_TXTM_CTRL	(1 << 4)
#define MV88E1116_RGMII_RXTM_CTRL	(1 << 5)

/*
 * Commands configuration
 */
#define CONFIG_SYS_LONGHELP
#define CONFIG_AUTO_COMPLETE
#define CONFIG_CMDLINE_EDITING

/*
 * mv-common.h should be defined after CMD configs since it used them
 * to enable certain macros
 */
#include "mv-common.h"

/*
 *  Environment variables configurations
 */
#ifdef CONFIG_CMD_NAND
#define CONFIG_ENV_SECT_SIZE 0x10000
#endif

#define CONFIG_ENV_SIZE	0x10000
#define CONFIG_ENV_OFFSET 0xa0000

/*
 * Default environment variables
 */
#define CONFIG_BOOTCOMMAND ""

#define CONFIG_EXTRA_ENV_SETTINGS \
	"bootargs=console=ttyS0,115200\0" \
	"mtdparts=mtdparts=orion_nand:0xa0000@0x0(uboot),"\
	"0x010000@0xa0000(env),"\
	"0x500000@0xc0000(uimage),"\
	"0x1a40000@0x5c0000(rootfs)\0" \
	"mtdids=nand0=orion_nand\0"\
	"bootdelay=-1\0"\
	"autostart=no\0"\
	"autoload=no\0"

/*
 * Ethernet Driver configuration
 */
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS {1, 0}	/* enable port 0 only */
#define CONFIG_PHY_BASE_ADR 8
#endif /* CONFIG_CMD_NET */

/*
 * USB/EHCI
 */
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_EHCI_KIRKWOOD	/* on Kirkwood platform	*/
#define CONFIG_EHCI_IS_TDI
#endif /* CONFIG_CMD_USB */

/*
 * File system
 */
#define CONFIG_JFFS2_NAND
#define CONFIG_JFFS2_LZO
#define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
#define CONFIG_MTD_PARTITIONS

/*
 * SATA
 */
#ifdef CONFIG_MVSATA_IDE
#define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
#define CONFIG_SYS_ATA_IDE1_OFFSET      MV_SATA_PORT1_OFFSET
#endif

/*
 * EFI partition
 */

/*
 *  Date Time
 */
#ifdef CONFIG_CMD_DATE
#define CONFIG_RTC_MV
#endif /* CONFIG_CMD_DATE */

#define CONFIG_KIRKWOOD_GPIO

#endif /* _CONFIG_NAS220_H */
Commit	Line	Data
	1	/*
	2	* Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com>
	3	*
	4	* based on work from:
	5	* (C) Copyright 2009
	6	* Marvell Semiconductor <www.marvell.com>
	7	* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
	8	*
	9	* SPDX-License-Identifier: GPL-2.0+
	10	*/
	11
	12	#ifndef _CONFIG_NAS220_H
	13	#define _CONFIG_NAS220_H
	14
	15	/*
	16	* Machine type ID
	17	*/
	18	#define CONFIG_MACH_TYPE MACH_TYPE_RD88F6192_NAS
	19
	20	/*
	21	* High Level Configuration Options (easy to change)
	22	*/
	23	#define CONFIG_FEROCEON_88FR131 /* #define CPU Core subversion */
	24	#define CONFIG_KW88F6192 /* SOC Name */
	25	#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
	26
	27	/* power-on led, regulator, sata0, sata1 */
	28	#define NAS220_GE_OE_VAL_LOW ((1 << 12)\|(1 << 14)\|(1 << 24)\|(1 << 28))
	29	#define NAS220_GE_OE_VAL_HIGH (0)
	30	#define NAS220_GE_OE_LOW (~((1 << 12)\|(1 << 14)\|(1 << 24)\|(1 << 28)))
	31	#define NAS220_GE_OE_HIGH (~(0))
	32
	33	/* PHY related */
	34	#define MV88E1116_LED_FCTRL_REG 10
	35	#define MV88E1116_CPRSP_CR3_REG 21
	36	#define MV88E1116_MAC_CTRL_REG 21
	37	#define MV88E1116_PGADR_REG 22
	38	#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
	39	#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
	40
	41	/*
	42	* Commands configuration
	43	*/
	44	#define CONFIG_SYS_LONGHELP
	45	#define CONFIG_AUTO_COMPLETE
	46	#define CONFIG_CMDLINE_EDITING
	47
	48	/*
	49	* mv-common.h should be defined after CMD configs since it used them
	50	* to enable certain macros
	51	*/
	52	#include "mv-common.h"
	53
	54	/*
	55	* Environment variables configurations
	56	*/
	57	#ifdef CONFIG_CMD_NAND
	58	#define CONFIG_ENV_SECT_SIZE 0x10000
	59	#endif
	60
	61	#define CONFIG_ENV_SIZE 0x10000
	62	#define CONFIG_ENV_OFFSET 0xa0000
	63
	64	/*
	65	* Default environment variables
	66	*/
	67	#define CONFIG_BOOTCOMMAND ""
	68
	69	#define CONFIG_EXTRA_ENV_SETTINGS \
	70	"bootargs=console=ttyS0,115200\0" \
	71	"mtdparts=mtdparts=orion_nand:0xa0000@0x0(uboot),"\
	72	"0x010000@0xa0000(env),"\
	73	"0x500000@0xc0000(uimage),"\
	74	"0x1a40000@0x5c0000(rootfs)\0" \
	75	"mtdids=nand0=orion_nand\0"\
	76	"bootdelay=-1\0"\
	77	"autostart=no\0"\
	78	"autoload=no\0"
	79
	80	/*
	81	* Ethernet Driver configuration
	82	*/
	83	#ifdef CONFIG_CMD_NET
	84	#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
	85	#define CONFIG_PHY_BASE_ADR 8
	86	#endif /* CONFIG_CMD_NET */
	87
	88	/*
	89	* USB/EHCI
	90	*/
	91	#ifdef CONFIG_CMD_USB
	92	#define CONFIG_USB_EHCI_KIRKWOOD /* on Kirkwood platform */
	93	#define CONFIG_EHCI_IS_TDI
	94	#endif /* CONFIG_CMD_USB */
	95
	96	/*
	97	* File system
	98	*/
	99	#define CONFIG_JFFS2_NAND
	100	#define CONFIG_JFFS2_LZO
	101	#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
	102	#define CONFIG_MTD_PARTITIONS
	103
	104	/*
	105	* SATA
	106	*/
	107	#ifdef CONFIG_MVSATA_IDE
	108	#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
	109	#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
	110	#endif
	111
	112	/*
	113	* EFI partition
	114	*/
	115
	116	/*
	117	* Date Time
	118	*/
	119	#ifdef CONFIG_CMD_DATE
	120	#define CONFIG_RTC_MV
	121	#endif /* CONFIG_CMD_DATE */
	122
	123	#define CONFIG_KIRKWOOD_GPIO
	124
	125	#endif /* _CONFIG_NAS220_H */
	126