Bindings/display/ti/ti,omap-dss.txt

   1 Texas Instruments OMAP Display Subsystem
   2 ========================================
   3
   4 Generic Description
   5 -------------------
   6
   7 This document is a generic description of the OMAP Display Subsystem bindings.
   8 Binding details for each OMAP SoC version are described in respective binding
   9 documentation.
  10
  11 The OMAP Display Subsystem (DSS) hardware consists of DSS Core, DISPC module and
  12 a number of encoder modules. All DSS versions contain DSS Core and DISPC, but
  13 the encoder modules vary.
  14
  15 The DSS Core is the parent of the other DSS modules, and manages clock routing,
  16 integration to the SoC, etc.
  17
  18 DISPC is the display controller, which reads pixels from the memory and outputs
  19 a RGB pixel stream to encoders.
  20
  21 The encoder modules encode the received RGB pixel stream to a video output like
  22 HDMI, MIPI DPI, etc.
  23
  24 Video Ports
  25 -----------
  26
  27 The DSS Core and the encoders have video port outputs. The structure of the
  28 video ports is described in Documentation/devicetree/bindings/graph.txt,
  29 and the properties for the ports and endpoints for each encoder are
  30 described in the SoC's DSS binding documentation.
  31
  32 The video ports are used to describe the connections to external hardware, like
  33 panels or external encoders.
  34
  35 Aliases
  36 -------
  37
  38 The board dts file may define aliases for displays to assign "displayX" style
  39 name for each display. If no aliases are defined, a semi-random number is used
  40 for the display.
  41
  42 Example
  43 -------
  44
  45 A shortened example of the DSS description for OMAP4, with non-relevant parts
  46 removed, defined in omap4.dtsi:
  47
  48 dss: dss@58000000 {
  49         compatible = "ti,omap4-dss";
  50         reg = <0x58000000 0x80>;
  51         status = "disabled";
  52         ti,hwmods = "dss_core";
  53         clocks = <&dss_dss_clk>;
  54         clock-names = "fck";
  55         #address-cells = <1>;
  56         #size-cells = <1>;
  57         ranges;
  58
  59         dispc@58001000 {
  60                 compatible = "ti,omap4-dispc";
  61                 reg = <0x58001000 0x1000>;
  62                 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
  63                 ti,hwmods = "dss_dispc";
  64                 clocks = <&dss_dss_clk>;
  65                 clock-names = "fck";
  66         };
  67
  68         hdmi: encoder@58006000 {
  69                 compatible = "ti,omap4-hdmi";
  70                 reg = <0x58006000 0x200>,
  71                       <0x58006200 0x100>,
  72                       <0x58006300 0x100>,
  73                       <0x58006400 0x1000>;
  74                 reg-names = "wp", "pll", "phy", "core";
  75                 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
  76                 status = "disabled";
  77                 ti,hwmods = "dss_hdmi";
  78                 clocks = <&dss_48mhz_clk>, <&dss_sys_clk>;
  79                 clock-names = "fck", "sys_clk";
  80         };
  81 };
  82
  83 A shortened example of the board description for OMAP4 Panda board, defined in
  84 omap4-panda.dts.
  85
  86 The Panda board has a DVI and a HDMI connector, and the board contains a TFP410
  87 chip (MIPI DPI to DVI encoder) and a TPD12S015 chip (HDMI ESD protection & level
  88 shifter). The video pipelines for the connectors are formed as follows:
  89
  90 DSS Core --(MIPI DPI)--> TFP410 --(DVI)--> DVI Connector
  91 OMAP HDMI --(HDMI)--> TPD12S015 --(HDMI)--> HDMI Connector
  92
  93 / {
  94         aliases {
  95                 display0 = &dvi0;
  96                 display1 = &hdmi0;
  97         };
  98
  99         tfp410: encoder@0 {
 100                 compatible = "ti,tfp410";
 101                 gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;     /* 0, power-down */
 102
 103                 pinctrl-names = "default";
 104                 pinctrl-0 = <&tfp410_pins>;
 105
 106                 ports {
 107                         #address-cells = <1>;
 108                         #size-cells = <0>;
 109
 110                         port@0 {
 111                                 reg = <0>;
 112
 113                                 tfp410_in: endpoint@0 {
 114                                         remote-endpoint = <&dpi_out>;
 115                                 };
 116                         };
 117
 118                         port@1 {
 119                                 reg = <1>;
 120
 121                                 tfp410_out: endpoint@0 {
 122                                         remote-endpoint = <&dvi_connector_in>;
 123                                 };
 124                         };
 125                 };
 126         };
 127
 128         dvi0: connector@0 {
 129                 compatible = "dvi-connector";
 130                 label = "dvi";
 131
 132                 i2c-bus = <&i2c3>;
 133
 134                 port {
 135                         dvi_connector_in: endpoint {
 136                                 remote-endpoint = <&tfp410_out>;
 137                         };
 138                 };
 139         };
 140
 141         tpd12s015: encoder@1 {
 142                 compatible = "ti,tpd12s015";
 143
 144                 pinctrl-names = "default";
 145                 pinctrl-0 = <&tpd12s015_pins>;
 146
 147                 gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,   /* 60, CT CP HPD */
 148                         <&gpio2 9 GPIO_ACTIVE_HIGH>,    /* 41, LS OE */
 149                         <&gpio2 31 GPIO_ACTIVE_HIGH>;   /* 63, HPD */
 150
 151                 ports {
 152                         #address-cells = <1>;
 153                         #size-cells = <0>;
 154
 155                         port@0 {
 156                                 reg = <0>;
 157
 158                                 tpd12s015_in: endpoint@0 {
 159                                         remote-endpoint = <&hdmi_out>;
 160                                 };
 161                         };
 162
 163                         port@1 {
 164                                 reg = <1>;
 165
 166                                 tpd12s015_out: endpoint@0 {
 167                                         remote-endpoint = <&hdmi_connector_in>;
 168                                 };
 169                         };
 170                 };
 171         };
 172
 173         hdmi0: connector@1 {
 174                 compatible = "hdmi-connector";
 175                 label = "hdmi";
 176
 177                 port {
 178                         hdmi_connector_in: endpoint {
 179                                 remote-endpoint = <&tpd12s015_out>;
 180                         };
 181                 };
 182         };
 183 };
 184
 185 &dss {
 186         status = "ok";
 187
 188         pinctrl-names = "default";
 189         pinctrl-0 = <&dss_dpi_pins>;
 190
 191         port {
 192                 dpi_out: endpoint {
 193                         remote-endpoint = <&tfp410_in>;
 194                         data-lines = <24>;
 195                 };
 196         };
 197 };
 198
 199 &hdmi {
 200         status = "ok";
 201         vdda-supply = <&vdac>;
 202
 203         pinctrl-names = "default";
 204         pinctrl-0 = <&dss_hdmi_pins>;
 205
 206         port {
 207                 hdmi_out: endpoint {
 208                         remote-endpoint = <&tpd12s015_in>;
 209                 };
 210         };
 211 };