1 * MARVELL MMP DMA controller
3 Marvell Peripheral DMA Controller
4 Used platforms: pxa688, pxa910, pxa3xx, etc
7 - compatible: Should be "marvell,pdma-1.0"
8 - reg: Should contain DMA registers location and length.
9 - interrupts: Either contain all of the per-channel DMA interrupts
10 or one irq for pdma device
13 - dma-channels: Number of DMA channels supported by the controller (defaults
14 to 32 when not specified)
15 - #dma-channels: deprecated
16 - dma-requests: Number of DMA requestor lines supported by the controller
17 (defaults to 32 when not specified)
18 - #dma-requests: deprecated
21 Used platforms: pxa25x, pxa27x, pxa3xx, pxa93x, pxa168, pxa910, pxa688.
26 * Each channel has specific irq
27 * ICU parse out irq channel from ICU register,
28 * while DMA controller may not able to distinguish the irq channel
29 * Using this method, interrupt-parent is required as demuxer
30 * For example, pxa688 icu register 0x128, bit 0~15 is PDMA channel irq,
33 pdma: dma-controller@d4000000 {
34 compatible = "marvell,pdma-1.0";
35 reg = <0xd4000000 0x10000>;
36 interrupts = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>;
37 interrupt-parent = <&intcmux32>;
42 * One irq for all channels
43 * Dmaengine driver (DMA controller) distinguish irq channel via
44 * parsing internal register
46 pdma: dma-controller@d4000000 {
47 compatible = "marvell,pdma-1.0";
48 reg = <0xd4000000 0x10000>;
54 Marvell Two Channel DMA Controller used specifically for audio
55 Used platforms: pxa688, pxa910
58 - compatible: Should be "marvell,adma-1.0" or "marvell,pxa910-squ"
59 - reg: Should contain DMA registers location and length.
60 - interrupts: Either contain all of the per-channel DMA interrupts
61 or one irq for dma device
63 "marvell,adma-1.0" used on pxa688
64 "marvell,pxa910-squ" used on pxa910
68 /* each channel has specific irq */
69 adma0: dma-controller@d42a0800 {
70 compatible = "marvell,adma-1.0";
71 reg = <0xd42a0800 0x100>;
73 interrupt-parent = <&intcmux32>;
76 /* One irq for all channels */
77 squ: dma-controller@d42a0800 {
78 compatible = "marvell,pxa910-squ";
79 reg = <0xd42a0800 0x100>;