Bindings/iio/st,st-sensors.yaml

   1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
   2 %YAML 1.2
   3 ---
   4 $id: http://devicetree.org/schemas/iio/st,st-sensors.yaml#
   5 $schema: http://devicetree.org/meta-schemas/core.yaml#
   6
   7 title: STMicroelectronics MEMS sensors
   8
   9 description: The STMicroelectronics sensor devices are pretty straight-forward
  10   I2C or SPI devices, all sharing the same device tree descriptions no matter
  11   what type of sensor it is.
  12   Note that whilst this covers many STMicro MEMs sensors, some more complex
  13   IMUs need their own bindings.
  14
  15 maintainers:
  16   - Denis Ciocca <denis.ciocca@st.com>
  17   - Linus Walleij <linus.walleij@linaro.org>
  18
  19 properties:
  20   compatible:
  21     oneOf:
  22       - description: STMicroelectronics Accelerometers
  23         enum:
  24           - st,h3lis331dl-accel
  25           - st,lis2de12
  26           - st,lis2dw12
  27           - st,lis2hh12
  28           - st,lis2dh12-accel
  29           - st,lis302dl
  30           - st,lis331dl-accel
  31           - st,lis331dlh-accel
  32           - st,lis3de
  33           - st,lis3dh-accel
  34           - st,lis3dhh
  35           - st,lis3l02dq
  36           - st,lis3lv02dl-accel
  37           - st,lng2dm-accel
  38           - st,lsm303agr-accel
  39           - st,lsm303c-accel
  40           - st,lsm303dl-accel
  41           - st,lsm303dlh-accel
  42           - st,lsm303dlhc-accel
  43           - st,lsm303dlm-accel
  44           - st,lsm330-accel
  45           - st,lsm330d-accel
  46           - st,lsm330dl-accel
  47           - st,lsm330dlc-accel
  48       - items:
  49           - const: st,iis328dq
  50           - const: st,h3lis331dl-accel
  51       - description: Silan Accelerometers
  52         enum:
  53           - silan,sc7a20
  54       - description: STMicroelectronics Gyroscopes
  55         enum:
  56           - st,l3g4200d-gyro
  57           - st,l3g4is-gyro
  58           - st,l3gd20-gyro
  59           - st,l3gd20h-gyro
  60           - st,lsm330-gyro
  61           - st,lsm330d-gyro
  62           - st,lsm330dl-gyro
  63           - st,lsm330dlc-gyro
  64           - st,lsm9ds0-gyro
  65       - description: STMicroelectronics Magnetometers
  66         enum:
  67           - st,lis2mdl
  68           - st,lis3mdl-magn
  69           - st,lsm303agr-magn
  70           - st,lsm303c-magn
  71           - st,lsm303dlh-magn
  72           - st,lsm303dlhc-magn
  73           - st,lsm303dlm-magn
  74           - st,lsm9ds1-magn
  75       - description: STMicroelectronics Pressure Sensors
  76         enum:
  77           - st,lps001wp-press
  78           - st,lps22df
  79           - st,lps22hb-press
  80           - st,lps22hh
  81           - st,lps25h-press
  82           - st,lps331ap-press
  83           - st,lps33hw
  84           - st,lps35hw
  85       - description: IMUs
  86         enum:
  87           - st,lsm303d-imu
  88           - st,lsm9ds0-imu
  89       - description: Deprecated bindings
  90         enum:
  91           - st,lis302dl-spi
  92           - st,lis3lv02d
  93         deprecated: true
  94
  95   reg:
  96     maxItems: 1
  97
  98   interrupts:
  99     description: interrupt line(s) connected to the DRDY line(s) and/or the
 100       Inertial interrupt lines INT1 and INT2 if these exist. This means up to
 101       three interrupts, and the DRDY must be the first one if it exists on
 102       the package. The trigger edge of the interrupts is sometimes software
 103       configurable in the hardware so the operating system should parse this
 104       flag and set up the trigger edge as indicated in the device tree.
 105     minItems: 1
 106     maxItems: 2
 107
 108   vdd-supply: true
 109   vddio-supply: true
 110
 111   st,drdy-int-pin:
 112     description: the pin on the package that will be used to signal
 113       "data ready" (valid values 1 or 2). This property is not configurable
 114       on all sensors.
 115     $ref: /schemas/types.yaml#/definitions/uint32
 116     enum: [1, 2]
 117
 118   drive-open-drain:
 119     $ref: /schemas/types.yaml#/definitions/flag
 120     description: the interrupt/data ready line will be configured
 121       as open drain, which is useful if several sensors share the same
 122       interrupt line. (This binding is taken from pinctrl.)
 123
 124   mount-matrix:
 125     description: an optional 3x3 mounting rotation matrix.
 126
 127 allOf:
 128   - if:
 129       properties:
 130         compatible:
 131           enum:
 132             # These have no interrupts
 133             - st,lps001wp
 134     then:
 135       properties:
 136         interrupts: false
 137         st,drdy-int-pin: false
 138         drive-open-drain: false
 139
 140   - if:
 141       properties:
 142         compatible:
 143           enum:
 144             # These have only DRDY
 145             - st,lis2mdl
 146             - st,lis3l02dq
 147             - st,lis3lv02dl-accel
 148             - st,lps22df
 149             - st,lps22hb-press
 150             - st,lps22hh
 151             - st,lps25h-press
 152             - st,lps33hw
 153             - st,lps35hw
 154             - st,lsm303agr-magn
 155             - st,lsm303dlh-magn
 156             - st,lsm303dlhc-magn
 157             - st,lsm303dlm-magn
 158     then:
 159       properties:
 160         interrupts:
 161           maxItems: 1
 162         st,drdy-int-pin: false
 163
 164 required:
 165   - compatible
 166   - reg
 167
 168 additionalProperties: false
 169
 170 examples:
 171   - |
 172     #include <dt-bindings/interrupt-controller/irq.h>
 173     i2c {
 174       #address-cells = <1>;
 175       #size-cells = <0>;
 176
 177       accelerometer@1c {
 178         compatible = "st,lis331dl-accel";
 179         reg = <0x1c>;
 180         st,drdy-int-pin = <1>;
 181         vdd-supply = <&ldo1>;
 182         vddio-supply = <&ldo2>;
 183         interrupt-parent = <&gpio>;
 184         interrupts = <18 IRQ_TYPE_EDGE_RISING>, <19 IRQ_TYPE_EDGE_RISING>;
 185       };
 186     };
 187     spi {
 188       #address-cells = <1>;
 189       #size-cells = <0>;
 190       num-cs = <1>;
 191
 192       l3g4200d: gyroscope@0 {
 193         compatible = "st,l3g4200d-gyro";
 194         st,drdy-int-pin = <2>;
 195         reg = <0>;
 196         vdd-supply = <&vcc_io>;
 197         vddio-supply = <&vcc_io>;
 198       };
 199     };
 200 ...