Bindings/media/ti-am437x-vpfe.txt

   1 Texas Instruments AM437x CAMERA (VPFE)
   2 --------------------------------------
   3
   4 The Video Processing Front End (VPFE) is a key component for image capture
   5 applications. The capture module provides the system interface and the
   6 processing capability to connect RAW image-sensor modules and video decoders
   7 to the AM437x device.
   8
   9 Required properties:
  10 - compatible: must be "ti,am437x-vpfe"
  11 - reg: physical base address and length of the registers set for the device;
  12 - interrupts: should contain IRQ line for the VPFE;
  13 - ti,am437x-vpfe-interface: can be one of the following,
  14         0 - Raw Bayer Interface.
  15         1 - 8 Bit BT656 Interface.
  16         2 - 10 Bit BT656 Interface.
  17         3 - YCbCr 8 Bit Interface.
  18         4 - YCbCr 16 Bit Interface.
  19
  20 VPFE supports a single port node with parallel bus. It should contain one
  21 'port' child node with child 'endpoint' node. Please refer to the bindings
  22 defined in Documentation/devicetree/bindings/media/video-interfaces.txt.
  23
  24 Example:
  25         vpfe: vpfe@f0034000 {
  26                 compatible = "ti,am437x-vpfe";
  27                 reg = <0x48328000 0x2000>;
  28                 interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
  29
  30                 pinctrl-names = "default", "sleep";
  31                 pinctrl-0 = <&vpfe_pins_default>;
  32                 pinctrl-1 = <&vpfe_pins_sleep>;
  33
  34                 port {
  35                         #address-cells = <1>;
  36                         #size-cells = <0>;
  37
  38                         vpfe0_ep: endpoint {
  39                                 remote-endpoint = <&ov2659_1>;
  40                                 ti,am437x-vpfe-interface = <0>;
  41                                 bus-width = <8>;
  42                                 hsync-active = <0>;
  43                                 vsync-active = <0>;
  44                         };
  45                 };
  46         };
  47
  48         i2c1: i2c@4802a000 {
  49
  50                 ov2659@30 {
  51                         compatible = "ti,ov2659";
  52                         reg = <0x30>;
  53
  54                         port {
  55                                 ov2659_1: endpoint {
  56                                         remote-endpoint = <&vpfe0_ep>;
  57                                         bus-width = <8>;
  58                                         mclk-frequency = <12000000>;
  59                                 };
  60                         };
  61         };