Bindings/mfd/samsung,s5m8767.yaml

   1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
   2 %YAML 1.2
   3 ---
   4 $id: http://devicetree.org/schemas/mfd/samsung,s5m8767.yaml#
   5 $schema: http://devicetree.org/meta-schemas/core.yaml#
   6
   7 title: Samsung S5M8767 Power Management IC
   8
   9 maintainers:
  10   - Krzysztof Kozlowski <krzk@kernel.org>
  11
  12 description: |
  13   This is a part of device tree bindings for S2M and S5M family of Power
  14   Management IC (PMIC).
  15
  16   The Samsung S5M8767 is a Power Management IC which includes voltage
  17   and current regulators, RTC, clock outputs and other sub-blocks.
  18
  19 properties:
  20   compatible:
  21     const: samsung,s5m8767-pmic
  22
  23   clocks:
  24     $ref: ../clock/samsung,s2mps11.yaml
  25     description:
  26       Child node describing clock provider.
  27
  28   interrupts:
  29     maxItems: 1
  30
  31   reg:
  32     maxItems: 1
  33
  34   regulators:
  35     $ref: ../regulator/samsung,s5m8767.yaml
  36     description:
  37       List of child nodes that specify the regulators.
  38
  39   s5m8767,pmic-buck2-dvs-voltage:
  40     $ref: /schemas/types.yaml#/definitions/uint32-array
  41     minItems: 8
  42     maxItems: 8
  43     description: |
  44       A set of 8 voltage values in micro-volt (uV) units for buck2 when
  45       changing voltage using gpio dvs.
  46
  47   s5m8767,pmic-buck3-dvs-voltage:
  48     $ref: /schemas/types.yaml#/definitions/uint32-array
  49     minItems: 8
  50     maxItems: 8
  51     description: |
  52       A set of 8 voltage values in micro-volt (uV) units for buck3 when
  53       changing voltage using gpio dvs.
  54
  55   s5m8767,pmic-buck4-dvs-voltage:
  56     $ref: /schemas/types.yaml#/definitions/uint32-array
  57     minItems: 8
  58     maxItems: 8
  59     description: |
  60       A set of 8 voltage values in micro-volt (uV) units for buck4 when
  61       changing voltage using gpio dvs.
  62
  63   s5m8767,pmic-buck-ds-gpios:
  64     minItems: 3
  65     maxItems: 3
  66     description: |
  67       GPIO specifiers for three host gpio's used for selecting GPIO DVS lines.
  68       It is one-to-one mapped to dvs gpio lines.
  69
  70   s5m8767,pmic-buck2-uses-gpio-dvs:
  71     type: boolean
  72     description: buck2 can be controlled by gpio dvs.
  73
  74   s5m8767,pmic-buck3-uses-gpio-dvs:
  75     type: boolean
  76     description: buck3 can be controlled by gpio dvs.
  77
  78   s5m8767,pmic-buck4-uses-gpio-dvs:
  79     type: boolean
  80     description: buck4 can be controlled by gpio dvs.
  81
  82   s5m8767,pmic-buck-default-dvs-idx:
  83     $ref: /schemas/types.yaml#/definitions/uint32-array
  84     minimum: 0
  85     maximum: 7
  86     default: 0
  87     description: |
  88       Default voltage setting selected from the possible 8 options selectable
  89       by the dvs gpios. The value of this property should be between 0 and 7.
  90       If not specified or if out of range, the default value of this property
  91       is set to 0.
  92
  93   s5m8767,pmic-buck-dvs-gpios:
  94     minItems: 3
  95     maxItems: 3
  96     description: |
  97       GPIO specifiers for three host gpio's used for dvs.
  98
  99   vinb1-supply:
 100     description: Power supply for buck1
 101   vinb2-supply:
 102     description: Power supply for buck2
 103   vinb3-supply:
 104     description: Power supply for buck3
 105   vinb4-supply:
 106     description: Power supply for buck4
 107   vinb5-supply:
 108     description: Power supply for buck5
 109   vinb6-supply:
 110     description: Power supply for buck6
 111   vinb7-supply:
 112     description: Power supply for buck7
 113   vinb8-supply:
 114     description: Power supply for buck8
 115   vinb9-supply:
 116     description: Power supply for buck9
 117
 118   vinl1-supply:
 119     description: Power supply for LDO3, LDO10, LDO26, LDO27
 120   vinl2-supply:
 121     description: Power supply for LDO13, LDO16, LDO25, LDO28
 122   vinl3-supply:
 123     description: Power supply for LDO11, LDO14
 124   vinl4-supply:
 125     description: Power supply for LDO4, LDO9
 126   vinl5-supply:
 127     description: Power supply for LDO12, LDO17, LDO19, LDO23
 128   vinl6-supply:
 129     description: Power supply for LDO18, LDO20, LDO21, LDO24
 130   vinl7-supply:
 131     description: Power supply for LDO5, LDO22
 132   vinl8-supply:
 133     description: Power supply for LDO1, LDO6, LDO7, LDO8, LDO15
 134   vinl9-supply:
 135     description: Power supply for LDO2
 136
 137   wakeup-source: true
 138
 139 required:
 140   - compatible
 141   - reg
 142   - regulators
 143   - s5m8767,pmic-buck-ds-gpios
 144
 145 dependencies:
 146   s5m8767,pmic-buck2-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ]
 147   s5m8767,pmic-buck3-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ]
 148   s5m8767,pmic-buck4-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ]
 149   s5m8767,pmic-buck2-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck2-dvs-voltage' ]
 150   s5m8767,pmic-buck3-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck3-dvs-voltage' ]
 151   s5m8767,pmic-buck4-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck4-dvs-voltage' ]
 152
 153 additionalProperties: false
 154
 155 allOf:
 156   - not:
 157       required:
 158         - s5m8767,pmic-buck2-uses-gpio-dvs
 159         - s5m8767,pmic-buck3-uses-gpio-dvs
 160   - not:
 161       required:
 162         - s5m8767,pmic-buck2-uses-gpio-dvs
 163         - s5m8767,pmic-buck4-uses-gpio-dvs
 164   - not:
 165       required:
 166         - s5m8767,pmic-buck3-uses-gpio-dvs
 167         - s5m8767,pmic-buck4-uses-gpio-dvs
 168
 169 examples:
 170   - |
 171     #include <dt-bindings/gpio/gpio.h>
 172     #include <dt-bindings/interrupt-controller/irq.h>
 173
 174     i2c {
 175         #address-cells = <1>;
 176         #size-cells = <0>;
 177
 178         pmic@66 {
 179             compatible = "samsung,s5m8767-pmic";
 180             reg = <0x66>;
 181
 182             interrupt-parent = <&gpx3>;
 183             interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 184             pinctrl-names = "default";
 185             pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
 186             wakeup-source;
 187
 188             s5m8767,pmic-buck-default-dvs-idx = <3>;
 189             s5m8767,pmic-buck2-uses-gpio-dvs;
 190
 191             s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>,
 192                                           <&gpd1 1 GPIO_ACTIVE_LOW>,
 193                                           <&gpd1 2 GPIO_ACTIVE_LOW>;
 194
 195             s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>,
 196                                          <&gpx2 4 GPIO_ACTIVE_LOW>,
 197                                          <&gpx2 5 GPIO_ACTIVE_LOW>;
 198
 199             s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
 200                                              <1250000>, <1200000>,
 201                                              <1150000>, <1100000>,
 202                                              <1000000>, <950000>;
 203
 204             s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
 205                                              <1100000>, <1100000>,
 206                                              <1000000>, <1000000>,
 207                                              <1000000>, <1000000>;
 208
 209             s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
 210                                              <1200000>, <1200000>,
 211                                              <1200000>, <1200000>,
 212                                              <1200000>, <1200000>;
 213
 214             clocks {
 215                 compatible = "samsung,s5m8767-clk";
 216                 #clock-cells = <1>;
 217                 clock-output-names = "en32khz_ap", "en32khz_cp", "en32khz_bt";
 218             };
 219
 220             regulators {
 221                 LDO1 {
 222                     regulator-name = "VDD_ALIVE";
 223                     regulator-min-microvolt = <1100000>;
 224                     regulator-max-microvolt = <1100000>;
 225                     regulator-always-on;
 226                     regulator-boot-on;
 227                     op_mode = <1>; /* Normal Mode */
 228                 };
 229
 230                 // ...
 231
 232                 BUCK1 {
 233                     regulator-name = "VDD_MIF";
 234                     regulator-min-microvolt = <950000>;
 235                     regulator-max-microvolt = <1100000>;
 236                     regulator-always-on;
 237                     regulator-boot-on;
 238                     op_mode = <1>; /* Normal Mode */
 239                 };
 240
 241                 BUCK2 {
 242                     regulator-name = "VDD_ARM";
 243                     regulator-min-microvolt = <900000>;
 244                     regulator-max-microvolt = <1350000>;
 245                     regulator-always-on;
 246                     regulator-boot-on;
 247                     op_mode = <1>; /* Normal Mode */
 248                 };
 249
 250                 // ...
 251             };
 252         };
 253     };
 254
 255   - |
 256     #include <dt-bindings/gpio/gpio.h>
 257     #include <dt-bindings/interrupt-controller/irq.h>
 258
 259     i2c {
 260         #address-cells = <1>;
 261         #size-cells = <0>;
 262
 263         pmic@66 {
 264             compatible = "samsung,s5m8767-pmic";
 265             reg = <0x66>;
 266
 267             interrupt-parent = <&gpx3>;
 268             interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 269             pinctrl-names = "default";
 270             pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
 271             wakeup-source;
 272
 273             s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>,
 274                                          <&gpx2 4 GPIO_ACTIVE_LOW>,
 275                                          <&gpx2 5 GPIO_ACTIVE_LOW>;
 276
 277             clocks {
 278                 compatible = "samsung,s5m8767-clk";
 279                 #clock-cells = <1>;
 280                 clock-output-names = "en32khz_ap", "en32khz_cp", "en32khz_bt";
 281             };
 282
 283             regulators {
 284                 LDO1 {
 285                     regulator-name = "VDD_ALIVE";
 286                     regulator-min-microvolt = <1100000>;
 287                     regulator-max-microvolt = <1100000>;
 288                     regulator-always-on;
 289                     regulator-boot-on;
 290                     op_mode = <1>; /* Normal Mode */
 291                 };
 292
 293                 // ...
 294             };
 295         };
 296     };