Bindings/net/actions,owl-emac.yaml

   1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
   2 %YAML 1.2
   3 ---
   4 $id: http://devicetree.org/schemas/net/actions,owl-emac.yaml#
   5 $schema: http://devicetree.org/meta-schemas/core.yaml#
   6
   7 title: Actions Semi Owl SoCs Ethernet MAC Controller
   8
   9 maintainers:
  10   - Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
  11
  12 description: |
  13   This Ethernet MAC is used on the Owl family of SoCs from Actions Semi.
  14   It provides the RMII and SMII interfaces and is compliant with the
  15   IEEE 802.3 CSMA/CD standard, supporting both half-duplex and full-duplex
  16   operation modes at 10/100 Mb/s data transfer rates.
  17
  18 allOf:
  19   - $ref: ethernet-controller.yaml#
  20
  21 properties:
  22   compatible:
  23     oneOf:
  24       - const: actions,owl-emac
  25       - items:
  26           - enum:
  27               - actions,s500-emac
  28           - const: actions,owl-emac
  29
  30   reg:
  31     maxItems: 1
  32
  33   interrupts:
  34     maxItems: 1
  35
  36   clocks:
  37     minItems: 2
  38     maxItems: 2
  39
  40   clock-names:
  41     additionalItems: false
  42     items:
  43       - const: eth
  44       - const: rmii
  45
  46   resets:
  47     maxItems: 1
  48
  49   actions,ethcfg:
  50     $ref: /schemas/types.yaml#/definitions/phandle
  51     description:
  52       Phandle to the device containing custom config.
  53
  54   mdio:
  55     $ref: mdio.yaml#
  56     unevaluatedProperties: false
  57
  58 required:
  59   - compatible
  60   - reg
  61   - interrupts
  62   - clocks
  63   - clock-names
  64   - resets
  65   - phy-mode
  66   - phy-handle
  67
  68 unevaluatedProperties: false
  69
  70 examples:
  71   - |
  72     #include <dt-bindings/clock/actions,s500-cmu.h>
  73     #include <dt-bindings/interrupt-controller/arm-gic.h>
  74     #include <dt-bindings/reset/actions,s500-reset.h>
  75
  76     ethernet@b0310000 {
  77         compatible = "actions,s500-emac", "actions,owl-emac";
  78         reg = <0xb0310000 0x10000>;
  79         interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
  80         clocks = <&cmu 59 /*CLK_ETHERNET*/>, <&cmu CLK_RMII_REF>;
  81         clock-names = "eth", "rmii";
  82         resets = <&cmu RESET_ETHERNET>;
  83         phy-mode = "rmii";
  84         phy-handle = <&eth_phy>;
  85
  86         mdio {
  87             #address-cells = <1>;
  88             #size-cells = <0>;
  89
  90             eth_phy: ethernet-phy@3 {
  91                 reg = <0x3>;
  92                 interrupt-parent = <&sirq>;
  93                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
  94             };
  95         };
  96     };