Bindings/net/wireless/qcom,ath11k.yaml

   1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
   2 # Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
   3 %YAML 1.2
   4 ---
   5 $id: http://devicetree.org/schemas/net/wireless/qcom,ath11k.yaml#
   6 $schema: http://devicetree.org/meta-schemas/core.yaml#
   7
   8 title: Qualcomm Technologies ath11k wireless devices
   9
  10 maintainers:
  11   - Kalle Valo <kvalo@kernel.org>
  12
  13 description: |
  14   These are dt entries for Qualcomm Technologies, Inc. IEEE 802.11ax
  15   devices, for example like AHB based IPQ8074.
  16
  17 properties:
  18   compatible:
  19     enum:
  20       - qcom,ipq8074-wifi
  21       - qcom,ipq6018-wifi
  22       - qcom,wcn6750-wifi
  23       - qcom,ipq5018-wifi
  24
  25   reg:
  26     maxItems: 1
  27
  28   interrupts:
  29     minItems: 32
  30     maxItems: 52
  31
  32   interrupt-names:
  33     maxItems: 52
  34
  35   qcom,rproc:
  36     $ref: /schemas/types.yaml#/definitions/phandle
  37     description:
  38       DT entry of q6v5-wcss remoteproc driver.
  39       Phandle to a node that can contain the following properties
  40         * compatible
  41         * reg
  42         * reg-names
  43
  44   qcom,ath11k-calibration-variant:
  45     $ref: /schemas/types.yaml#/definitions/string
  46     description:
  47       string to uniquely identify variant of the calibration data in the
  48       board-2.bin for designs with colliding bus and device specific ids
  49
  50   memory-region:
  51     minItems: 1
  52     maxItems: 2
  53     description:
  54       phandle to a node describing reserved memory (System RAM memory)
  55       used by ath11k firmware (see bindings/reserved-memory/reserved-memory.txt)
  56
  57   iommus:
  58     minItems: 1
  59     maxItems: 2
  60
  61   wifi-firmware:
  62     type: object
  63     description: |
  64       WCN6750 wifi node can contain one optional firmware subnode.
  65       Firmware subnode is needed when the platform does not have Trustzone.
  66     required:
  67       - iommus
  68
  69   qcom,smem-states:
  70     $ref: /schemas/types.yaml#/definitions/phandle-array
  71     description: State bits used by the AP to signal the WLAN Q6.
  72     items:
  73       - description: Signal bits used to enable/disable low power mode
  74                      on WCN6750 in the case of WoW (Wake on Wireless).
  75
  76   qcom,smem-state-names:
  77     description: The names of the state bits used for SMP2P output.
  78     items:
  79       - const: wlan-smp2p-out
  80
  81 required:
  82   - compatible
  83   - reg
  84   - interrupts
  85   - qcom,rproc
  86
  87 additionalProperties: false
  88
  89 allOf:
  90   - if:
  91       properties:
  92         compatible:
  93           contains:
  94             enum:
  95               - qcom,ipq8074-wifi
  96               - qcom,ipq6018-wifi
  97     then:
  98       properties:
  99         interrupts:
 100           items:
 101             - description: misc-pulse1 interrupt events
 102             - description: misc-latch interrupt events
 103             - description: sw exception interrupt events
 104             - description: watchdog interrupt events
 105             - description: interrupt event for ring CE0
 106             - description: interrupt event for ring CE1
 107             - description: interrupt event for ring CE2
 108             - description: interrupt event for ring CE3
 109             - description: interrupt event for ring CE4
 110             - description: interrupt event for ring CE5
 111             - description: interrupt event for ring CE6
 112             - description: interrupt event for ring CE7
 113             - description: interrupt event for ring CE8
 114             - description: interrupt event for ring CE9
 115             - description: interrupt event for ring CE10
 116             - description: interrupt event for ring CE11
 117             - description: interrupt event for ring host2wbm-desc-feed
 118             - description: interrupt event for ring host2reo-re-injection
 119             - description: interrupt event for ring host2reo-command
 120             - description: interrupt event for ring host2rxdma-monitor-ring3
 121             - description: interrupt event for ring host2rxdma-monitor-ring2
 122             - description: interrupt event for ring host2rxdma-monitor-ring1
 123             - description: interrupt event for ring reo2ost-exception
 124             - description: interrupt event for ring wbm2host-rx-release
 125             - description: interrupt event for ring reo2host-status
 126             - description: interrupt event for ring reo2host-destination-ring4
 127             - description: interrupt event for ring reo2host-destination-ring3
 128             - description: interrupt event for ring reo2host-destination-ring2
 129             - description: interrupt event for ring reo2host-destination-ring1
 130             - description: interrupt event for ring rxdma2host-monitor-destination-mac3
 131             - description: interrupt event for ring rxdma2host-monitor-destination-mac2
 132             - description: interrupt event for ring rxdma2host-monitor-destination-mac1
 133             - description: interrupt event for ring ppdu-end-interrupts-mac3
 134             - description: interrupt event for ring ppdu-end-interrupts-mac2
 135             - description: interrupt event for ring ppdu-end-interrupts-mac1
 136             - description: interrupt event for ring rxdma2host-monitor-status-ring-mac3
 137             - description: interrupt event for ring rxdma2host-monitor-status-ring-mac2
 138             - description: interrupt event for ring rxdma2host-monitor-status-ring-mac1
 139             - description: interrupt event for ring host2rxdma-host-buf-ring-mac3
 140             - description: interrupt event for ring host2rxdma-host-buf-ring-mac2
 141             - description: interrupt event for ring host2rxdma-host-buf-ring-mac1
 142             - description: interrupt event for ring rxdma2host-destination-ring-mac3
 143             - description: interrupt event for ring rxdma2host-destination-ring-mac2
 144             - description: interrupt event for ring rxdma2host-destination-ring-mac1
 145             - description: interrupt event for ring host2tcl-input-ring4
 146             - description: interrupt event for ring host2tcl-input-ring3
 147             - description: interrupt event for ring host2tcl-input-ring2
 148             - description: interrupt event for ring host2tcl-input-ring1
 149             - description: interrupt event for ring wbm2host-tx-completions-ring3
 150             - description: interrupt event for ring wbm2host-tx-completions-ring2
 151             - description: interrupt event for ring wbm2host-tx-completions-ring1
 152             - description: interrupt event for ring tcl2host-status-ring
 153         interrupt-names:
 154           items:
 155             - const: misc-pulse1
 156             - const: misc-latch
 157             - const: sw-exception
 158             - const: watchdog
 159             - const: ce0
 160             - const: ce1
 161             - const: ce2
 162             - const: ce3
 163             - const: ce4
 164             - const: ce5
 165             - const: ce6
 166             - const: ce7
 167             - const: ce8
 168             - const: ce9
 169             - const: ce10
 170             - const: ce11
 171             - const: host2wbm-desc-feed
 172             - const: host2reo-re-injection
 173             - const: host2reo-command
 174             - const: host2rxdma-monitor-ring3
 175             - const: host2rxdma-monitor-ring2
 176             - const: host2rxdma-monitor-ring1
 177             - const: reo2ost-exception
 178             - const: wbm2host-rx-release
 179             - const: reo2host-status
 180             - const: reo2host-destination-ring4
 181             - const: reo2host-destination-ring3
 182             - const: reo2host-destination-ring2
 183             - const: reo2host-destination-ring1
 184             - const: rxdma2host-monitor-destination-mac3
 185             - const: rxdma2host-monitor-destination-mac2
 186             - const: rxdma2host-monitor-destination-mac1
 187             - const: ppdu-end-interrupts-mac3
 188             - const: ppdu-end-interrupts-mac2
 189             - const: ppdu-end-interrupts-mac1
 190             - const: rxdma2host-monitor-status-ring-mac3
 191             - const: rxdma2host-monitor-status-ring-mac2
 192             - const: rxdma2host-monitor-status-ring-mac1
 193             - const: host2rxdma-host-buf-ring-mac3
 194             - const: host2rxdma-host-buf-ring-mac2
 195             - const: host2rxdma-host-buf-ring-mac1
 196             - const: rxdma2host-destination-ring-mac3
 197             - const: rxdma2host-destination-ring-mac2
 198             - const: rxdma2host-destination-ring-mac1
 199             - const: host2tcl-input-ring4
 200             - const: host2tcl-input-ring3
 201             - const: host2tcl-input-ring2
 202             - const: host2tcl-input-ring1
 203             - const: wbm2host-tx-completions-ring3
 204             - const: wbm2host-tx-completions-ring2
 205             - const: wbm2host-tx-completions-ring1
 206             - const: tcl2host-status-ring
 207
 208   - if:
 209       properties:
 210         compatible:
 211           contains:
 212             enum:
 213               - qcom,ipq8074-wifi
 214               - qcom,ipq6018-wifi
 215     then:
 216       required:
 217         - interrupt-names
 218
 219   - if:
 220       properties:
 221         compatible:
 222           contains:
 223             enum:
 224               - qcom,wcn6750-wifi
 225     then:
 226       properties:
 227         interrupts:
 228           items:
 229             - description: interrupt event for ring CE1
 230             - description: interrupt event for ring CE2
 231             - description: interrupt event for ring CE3
 232             - description: interrupt event for ring CE4
 233             - description: interrupt event for ring CE5
 234             - description: interrupt event for ring CE6
 235             - description: interrupt event for ring CE7
 236             - description: interrupt event for ring CE8
 237             - description: interrupt event for ring CE9
 238             - description: interrupt event for ring CE10
 239             - description: interrupt event for ring DP1
 240             - description: interrupt event for ring DP2
 241             - description: interrupt event for ring DP3
 242             - description: interrupt event for ring DP4
 243             - description: interrupt event for ring DP5
 244             - description: interrupt event for ring DP6
 245             - description: interrupt event for ring DP7
 246             - description: interrupt event for ring DP8
 247             - description: interrupt event for ring DP9
 248             - description: interrupt event for ring DP10
 249             - description: interrupt event for ring DP11
 250             - description: interrupt event for ring DP12
 251             - description: interrupt event for ring DP13
 252             - description: interrupt event for ring DP14
 253             - description: interrupt event for ring DP15
 254             - description: interrupt event for ring DP16
 255             - description: interrupt event for ring DP17
 256             - description: interrupt event for ring DP18
 257             - description: interrupt event for ring DP19
 258             - description: interrupt event for ring DP20
 259             - description: interrupt event for ring DP21
 260             - description: interrupt event for ring DP22
 261
 262 examples:
 263   - |
 264
 265     q6v5_wcss: remoteproc@cd00000 {
 266         compatible = "qcom,ipq8074-wcss-pil";
 267         reg = <0xcd00000 0x4040>,
 268               <0x4ab000 0x20>;
 269         reg-names = "qdsp6",
 270                     "rmb";
 271     };
 272
 273     wifi0: wifi@c000000 {
 274         compatible = "qcom,ipq8074-wifi";
 275         reg = <0xc000000 0x2000000>;
 276         interrupts = <0 320 1>,
 277                      <0 319 1>,
 278                      <0 318 1>,
 279                      <0 317 1>,
 280                      <0 316 1>,
 281                      <0 315 1>,
 282                      <0 314 1>,
 283                      <0 311 1>,
 284                      <0 310 1>,
 285                      <0 411 1>,
 286                      <0 410 1>,
 287                      <0 40 1>,
 288                      <0 39 1>,
 289                      <0 302 1>,
 290                      <0 301 1>,
 291                      <0 37 1>,
 292                      <0 36 1>,
 293                      <0 296 1>,
 294                      <0 295 1>,
 295                      <0 294 1>,
 296                      <0 293 1>,
 297                      <0 292 1>,
 298                      <0 291 1>,
 299                      <0 290 1>,
 300                      <0 289 1>,
 301                      <0 288 1>,
 302                      <0 239 1>,
 303                      <0 236 1>,
 304                      <0 235 1>,
 305                      <0 234 1>,
 306                      <0 233 1>,
 307                      <0 232 1>,
 308                      <0 231 1>,
 309                      <0 230 1>,
 310                      <0 229 1>,
 311                      <0 228 1>,
 312                      <0 224 1>,
 313                      <0 223 1>,
 314                      <0 203 1>,
 315                      <0 183 1>,
 316                      <0 180 1>,
 317                      <0 179 1>,
 318                      <0 178 1>,
 319                      <0 177 1>,
 320                      <0 176 1>,
 321                      <0 163 1>,
 322                      <0 162 1>,
 323                      <0 160 1>,
 324                      <0 159 1>,
 325                      <0 158 1>,
 326                      <0 157 1>,
 327                      <0 156 1>;
 328         interrupt-names = "misc-pulse1",
 329                           "misc-latch",
 330                           "sw-exception",
 331                           "watchdog",
 332                           "ce0",
 333                           "ce1",
 334                           "ce2",
 335                           "ce3",
 336                           "ce4",
 337                           "ce5",
 338                           "ce6",
 339                           "ce7",
 340                           "ce8",
 341                           "ce9",
 342                           "ce10",
 343                           "ce11",
 344                           "host2wbm-desc-feed",
 345                           "host2reo-re-injection",
 346                           "host2reo-command",
 347                           "host2rxdma-monitor-ring3",
 348                           "host2rxdma-monitor-ring2",
 349                           "host2rxdma-monitor-ring1",
 350                           "reo2ost-exception",
 351                           "wbm2host-rx-release",
 352                           "reo2host-status",
 353                           "reo2host-destination-ring4",
 354                           "reo2host-destination-ring3",
 355                           "reo2host-destination-ring2",
 356                           "reo2host-destination-ring1",
 357                           "rxdma2host-monitor-destination-mac3",
 358                           "rxdma2host-monitor-destination-mac2",
 359                           "rxdma2host-monitor-destination-mac1",
 360                           "ppdu-end-interrupts-mac3",
 361                           "ppdu-end-interrupts-mac2",
 362                           "ppdu-end-interrupts-mac1",
 363                           "rxdma2host-monitor-status-ring-mac3",
 364                           "rxdma2host-monitor-status-ring-mac2",
 365                           "rxdma2host-monitor-status-ring-mac1",
 366                           "host2rxdma-host-buf-ring-mac3",
 367                           "host2rxdma-host-buf-ring-mac2",
 368                           "host2rxdma-host-buf-ring-mac1",
 369                           "rxdma2host-destination-ring-mac3",
 370                           "rxdma2host-destination-ring-mac2",
 371                           "rxdma2host-destination-ring-mac1",
 372                           "host2tcl-input-ring4",
 373                           "host2tcl-input-ring3",
 374                           "host2tcl-input-ring2",
 375                           "host2tcl-input-ring1",
 376                           "wbm2host-tx-completions-ring3",
 377                           "wbm2host-tx-completions-ring2",
 378                           "wbm2host-tx-completions-ring1",
 379                           "tcl2host-status-ring";
 380         qcom,rproc = <&q6v5_wcss>;
 381     };
 382
 383   - |
 384
 385     reserved-memory {
 386         #address-cells = <2>;
 387         #size-cells = <2>;
 388
 389         qcn9074_0: wifi@51100000 {
 390             no-map;
 391             reg = <0x0 0x51100000 0x0 0x03500000>;
 392         };
 393     };
 394
 395     pci {
 396         pcie0 {
 397             #size-cells = <2>;
 398             #address-cells = <3>;
 399
 400             wifi_0: wifi@0 {
 401                 reg = <0 0 0 0 0>;
 402                 memory-region = <&qcn9074_0>;
 403             };
 404         };
 405     };
 406
 407   - |
 408     #include <dt-bindings/interrupt-controller/arm-gic.h>
 409
 410     reserved-memory {
 411         #address-cells = <2>;
 412         #size-cells = <2>;
 413
 414         wlan_ce_mem: memory@4cd000 {
 415             no-map;
 416             reg = <0x0 0x004cd000 0x0 0x1000>;
 417         };
 418
 419         wlan_fw_mem: memory@80c00000 {
 420             no-map;
 421             reg = <0x0 0x80c00000 0x0 0xc00000>;
 422         };
 423     };
 424
 425     wifi: wifi@17a10040 {
 426         compatible = "qcom,wcn6750-wifi";
 427         reg = <0x17a10040 0x0>;
 428         iommus = <&apps_smmu 0x1c00 0x1>;
 429         interrupts = <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>,
 430                      <GIC_SPI 769 IRQ_TYPE_EDGE_RISING>,
 431                      <GIC_SPI 770 IRQ_TYPE_EDGE_RISING>,
 432                      <GIC_SPI 771 IRQ_TYPE_EDGE_RISING>,
 433                      <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>,
 434                      <GIC_SPI 773 IRQ_TYPE_EDGE_RISING>,
 435                      <GIC_SPI 774 IRQ_TYPE_EDGE_RISING>,
 436                      <GIC_SPI 775 IRQ_TYPE_EDGE_RISING>,
 437                      <GIC_SPI 776 IRQ_TYPE_EDGE_RISING>,
 438                      <GIC_SPI 777 IRQ_TYPE_EDGE_RISING>,
 439                      <GIC_SPI 778 IRQ_TYPE_EDGE_RISING>,
 440                      <GIC_SPI 779 IRQ_TYPE_EDGE_RISING>,
 441                      <GIC_SPI 780 IRQ_TYPE_EDGE_RISING>,
 442                      <GIC_SPI 781 IRQ_TYPE_EDGE_RISING>,
 443                      <GIC_SPI 782 IRQ_TYPE_EDGE_RISING>,
 444                      <GIC_SPI 783 IRQ_TYPE_EDGE_RISING>,
 445                      <GIC_SPI 784 IRQ_TYPE_EDGE_RISING>,
 446                      <GIC_SPI 785 IRQ_TYPE_EDGE_RISING>,
 447                      <GIC_SPI 786 IRQ_TYPE_EDGE_RISING>,
 448                      <GIC_SPI 787 IRQ_TYPE_EDGE_RISING>,
 449                      <GIC_SPI 788 IRQ_TYPE_EDGE_RISING>,
 450                      <GIC_SPI 789 IRQ_TYPE_EDGE_RISING>,
 451                      <GIC_SPI 790 IRQ_TYPE_EDGE_RISING>,
 452                      <GIC_SPI 791 IRQ_TYPE_EDGE_RISING>,
 453                      <GIC_SPI 792 IRQ_TYPE_EDGE_RISING>,
 454                      <GIC_SPI 793 IRQ_TYPE_EDGE_RISING>,
 455                      <GIC_SPI 794 IRQ_TYPE_EDGE_RISING>,
 456                      <GIC_SPI 795 IRQ_TYPE_EDGE_RISING>,
 457                      <GIC_SPI 796 IRQ_TYPE_EDGE_RISING>,
 458                      <GIC_SPI 797 IRQ_TYPE_EDGE_RISING>,
 459                      <GIC_SPI 798 IRQ_TYPE_EDGE_RISING>,
 460                      <GIC_SPI 799 IRQ_TYPE_EDGE_RISING>;
 461         qcom,rproc = <&remoteproc_wpss>;
 462         memory-region = <&wlan_fw_mem>, <&wlan_ce_mem>;
 463         qcom,smem-states = <&wlan_smp2p_out 0>;
 464         qcom,smem-state-names = "wlan-smp2p-out";
 465         wifi-firmware {
 466             iommus = <&apps_smmu 0x1c02 0x1>;
 467         };
 468     };