Bindings/pci/amlogic,axg-pcie.yaml

   1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
   2 %YAML 1.2
   3 ---
   4 $id: http://devicetree.org/schemas/pci/amlogic,axg-pcie.yaml#
   5 $schema: http://devicetree.org/meta-schemas/core.yaml#
   6
   7 title: Amlogic Meson AXG DWC PCIe SoC controller
   8
   9 maintainers:
  10   - Neil Armstrong <neil.armstrong@linaro.org>
  11
  12 description:
  13   Amlogic Meson PCIe host controller is based on the Synopsys DesignWare PCI core.
  14
  15 allOf:
  16   - $ref: /schemas/pci/pci-bus.yaml#
  17   - $ref: /schemas/pci/snps,dw-pcie-common.yaml#
  18
  19 # We need a select here so we don't match all nodes with 'snps,dw-pcie'
  20 select:
  21   properties:
  22     compatible:
  23       enum:
  24         - amlogic,axg-pcie
  25         - amlogic,g12a-pcie
  26   required:
  27     - compatible
  28
  29 properties:
  30   compatible:
  31     items:
  32       - enum:
  33           - amlogic,axg-pcie
  34           - amlogic,g12a-pcie
  35       - const: snps,dw-pcie
  36
  37   reg:
  38     items:
  39       - description: External local bus interface registers
  40       - description: Meson designed configuration registers
  41       - description: PCIe configuration space
  42
  43   reg-names:
  44     items:
  45       - const: elbi
  46       - const: cfg
  47       - const: config
  48
  49   interrupts:
  50     maxItems: 1
  51
  52   clocks:
  53     items:
  54       - description: PCIe GEN 100M PLL clock
  55       - description: PCIe RC clock gate
  56       - description: PCIe PHY clock
  57
  58   clock-names:
  59     items:
  60       - const: pclk
  61       - const: port
  62       - const: general
  63
  64   phys:
  65     maxItems: 1
  66
  67   phy-names:
  68     const: pcie
  69
  70   resets:
  71     items:
  72       - description: Port Reset
  73       - description: Shared APB reset
  74
  75   reset-names:
  76     items:
  77       - const: port
  78       - const: apb
  79
  80   num-lanes:
  81     const: 1
  82
  83   power-domains:
  84     maxItems: 1
  85
  86 required:
  87   - compatible
  88   - reg
  89   - reg-names
  90   - interrupts
  91   - clock
  92   - clock-names
  93   - "#address-cells"
  94   - "#size-cells"
  95   - "#interrupt-cells"
  96   - interrupt-map
  97   - interrupt-map-mask
  98   - ranges
  99   - bus-range
 100   - device_type
 101   - num-lanes
 102   - phys
 103   - phy-names
 104   - resets
 105   - reset-names
 106
 107 unevaluatedProperties: false
 108
 109 examples:
 110   - |
 111     #include <dt-bindings/interrupt-controller/irq.h>
 112     #include <dt-bindings/interrupt-controller/arm-gic.h>
 113     pcie: pcie@f9800000 {
 114         compatible = "amlogic,axg-pcie", "snps,dw-pcie";
 115         reg = <0xf9800000 0x400000>, <0xff646000 0x2000>, <0xf9f00000 0x100000>;
 116         reg-names = "elbi", "cfg", "config";
 117         interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
 118         clocks = <&pclk>, <&clk_port>, <&clk_phy>;
 119         clock-names = "pclk", "port", "general";
 120         resets = <&reset_pcie_port>, <&reset_pcie_apb>;
 121         reset-names = "port", "apb";
 122         phys = <&pcie_phy>;
 123         phy-names = "pcie";
 124         #interrupt-cells = <1>;
 125         interrupt-map-mask = <0 0 0 0>;
 126         interrupt-map = <0 0 0 0 &gic GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
 127         bus-range = <0x0 0xff>;
 128         #address-cells = <3>;
 129         #size-cells = <2>;
 130         device_type = "pci";
 131         num-lanes = <1>;
 132         ranges = <0x82000000 0 0 0xf9c00000 0 0x00300000>;
 133     };
 134 ...