Bindings/phy/brcm,brcmstb-usb-phy.yaml

   1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
   2 %YAML 1.2
   3 ---
   4 $id: http://devicetree.org/schemas/phy/brcm,brcmstb-usb-phy.yaml#
   5 $schema: http://devicetree.org/meta-schemas/core.yaml#
   6
   7 title: Broadcom STB USB PHY
   8
   9 description: Broadcom's PHY that handles EHCI/OHCI and/or XHCI
  10
  11 maintainers:
  12   - Al Cooper <alcooperx@gmail.com>
  13   - Rafał Miłecki <rafal@milecki.pl>
  14
  15 properties:
  16   compatible:
  17     enum:
  18       - brcm,bcm4908-usb-phy
  19       - brcm,bcm7211-usb-phy
  20       - brcm,bcm7216-usb-phy
  21       - brcm,brcmstb-usb-phy
  22
  23   reg:
  24     minItems: 1
  25     items:
  26       - description: the base CTRL register
  27       - description: XHCI EC register
  28       - description: XHCI GBL register
  29       - description: USB PHY register
  30       - description: USB MDIO register
  31       - description: BDC register
  32
  33   reg-names:
  34     minItems: 1
  35     items:
  36       - const: ctrl
  37       - const: xhci_ec
  38       - const: xhci_gbl
  39       - const: usb_phy
  40       - const: usb_mdio
  41       - const: bdc_ec
  42
  43   power-domains:
  44     maxItems: 1
  45
  46   clocks:
  47     minItems: 1
  48     maxItems: 2
  49
  50   clock-names:
  51     minItems: 1
  52     items:
  53       - const: sw_usb
  54       - const: sw_usb3
  55
  56   interrupts:
  57     description: wakeup interrupt
  58
  59   interrupt-names:
  60     const: wake
  61
  62   brcm,ipp:
  63     $ref: /schemas/types.yaml#/definitions/uint32
  64     description: Invert Port Power
  65     minimum: 0
  66     maximum: 1
  67
  68   brcm,ioc:
  69     $ref: /schemas/types.yaml#/definitions/uint32
  70     description: Invert Over Current detection
  71     minimum: 0
  72     maximum: 1
  73
  74   dr_mode:
  75     description: PHY Device mode. If this property is not defined, the PHY will
  76       default to "host" mode.
  77     enum:
  78       - host
  79       - peripheral
  80       - drd
  81       - typec-pd
  82
  83   brcm,syscon-piarbctl:
  84     description: phandle to syscon for handling config registers
  85     $ref: /schemas/types.yaml#/definitions/phandle
  86
  87   brcm,has-xhci:
  88     description: Indicates the PHY has an XHCI PHY.
  89     type: boolean
  90
  91   brcm,has-eohci:
  92     description: Indicates the PHY has an EHCI/OHCI PHY.
  93     type: boolean
  94
  95   "#phy-cells":
  96     description: |
  97       Cell allows setting the type of the PHY. Possible values are:
  98       - PHY_TYPE_USB2 for USB1.1/2.0 PHY
  99       - PHY_TYPE_USB3 for USB3.x PHY
 100     const: 1
 101
 102 required:
 103   - reg
 104   - "#phy-cells"
 105
 106 anyOf:
 107   - required:
 108       - brcm,has-xhci
 109   - required:
 110       - brcm,has-eohci
 111
 112 allOf:
 113   - if:
 114       properties:
 115         compatible:
 116           contains:
 117             enum:
 118               - brcm,bcm4908-usb-phy
 119               - brcm,brcmstb-usb-phy
 120     then:
 121       properties:
 122         reg:
 123           minItems: 1
 124           maxItems: 2
 125   - if:
 126       properties:
 127         compatible:
 128           contains:
 129             const: brcm,bcm7211-usb-phy
 130     then:
 131       properties:
 132         reg:
 133           minItems: 5
 134           maxItems: 6
 135         reg-names:
 136           minItems: 5
 137           maxItems: 6
 138   - if:
 139       properties:
 140         compatible:
 141           contains:
 142             const: brcm,bcm7216-usb-phy
 143     then:
 144       properties:
 145         reg:
 146           minItems: 3
 147           maxItems: 3
 148         reg-names:
 149           minItems: 3
 150           maxItems: 3
 151
 152 additionalProperties: false
 153
 154 examples:
 155   - |
 156     #include <dt-bindings/phy/phy.h>
 157
 158     usb-phy@f0470200 {
 159         compatible = "brcm,brcmstb-usb-phy";
 160         reg = <0xf0470200 0xb8>,
 161               <0xf0471940 0x6c0>;
 162         #phy-cells = <1>;
 163         dr_mode = "host";
 164         brcm,ioc = <1>;
 165         brcm,ipp = <1>;
 166         brcm,has-xhci;
 167         brcm,has-eohci;
 168         clocks = <&usb20>, <&usb30>;
 169         clock-names = "sw_usb", "sw_usb3";
 170     };
 171   - |
 172     #include <dt-bindings/phy/phy.h>
 173
 174     usb-phy@29f0200 {
 175         compatible = "brcm,bcm7211-usb-phy";
 176         reg = <0x29f0200 0x200>,
 177               <0x29c0880 0x30>,
 178               <0x29cc100 0x534>,
 179               <0x2808000 0x24>,
 180               <0x2980080 0x8>;
 181         reg-names = "ctrl",
 182             "xhci_ec",
 183             "xhci_gbl",
 184             "usb_phy",
 185             "usb_mdio";
 186         brcm,ioc = <0x0>;
 187         brcm,ipp = <0x0>;
 188         interrupts = <0x30>;
 189         interrupt-parent = <&vpu_intr1_nosec_intc>;
 190         interrupt-names = "wake";
 191         #phy-cells = <0x1>;
 192         brcm,has-xhci;
 193         brcm,syscon-piarbctl = <&syscon_piarbctl>;
 194         clocks = <&scmi_clk 256>;
 195         clock-names = "sw_usb";
 196     };