Bindings/pinctrl/mediatek,mt7622-pinctrl.yaml

   1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
   2 %YAML 1.2
   3 ---
   4 $id: http://devicetree.org/schemas/pinctrl/mediatek,mt7622-pinctrl.yaml#
   5 $schema: http://devicetree.org/meta-schemas/core.yaml#
   6
   7 title: MediaTek MT7622 Pin Controller
   8
   9 maintainers:
  10   - Sean Wang <sean.wang@kernel.org>
  11
  12 description:
  13   The MediaTek's MT7622 Pin controller is used to control SoC pins.
  14
  15 properties:
  16   compatible:
  17     enum:
  18       - mediatek,mt7622-pinctrl
  19       - mediatek,mt7629-pinctrl
  20
  21   reg:
  22     maxItems: 1
  23
  24   reg-names:
  25     items:
  26       - const: eint
  27
  28   gpio-controller: true
  29
  30   "#gpio-cells":
  31     const: 2
  32     description:
  33       Number of cells in GPIO specifier. Since the generic GPIO binding is used,
  34       the amount of cells must be specified as 2. See the below mentioned gpio
  35       binding representation for description of particular cells.
  36
  37   interrupt-controller: true
  38
  39   interrupts:
  40     maxItems: 1
  41
  42   "#interrupt-cells":
  43     const: 2
  44
  45 allOf:
  46   - $ref: pinctrl.yaml#
  47
  48 required:
  49   - compatible
  50   - reg
  51   - gpio-controller
  52   - "#gpio-cells"
  53
  54 if:
  55   required:
  56     - interrupt-controller
  57 then:
  58   required:
  59     - reg-names
  60     - interrupts
  61     - "#interrupt-cells"
  62
  63 patternProperties:
  64   '-pins(-[a-z]+)?$':
  65     type: object
  66     additionalProperties: false
  67     patternProperties:
  68       '^mux(-|$)':
  69         type: object
  70         additionalProperties: false
  71         description:
  72           pinmux configuration nodes.
  73         $ref: /schemas/pinctrl/pinmux-node.yaml
  74         properties:
  75           function:
  76             description:
  77               A string containing the name of the function to mux to the group.
  78             enum: [emmc, eth, i2c, i2s, ir, led, flash, pcie, pmic, pwm, sd,
  79                    spi, tdm, uart, watchdog, wifi]
  80
  81           groups:
  82             description:
  83               An array of strings. Each string contains the name of a group.
  84
  85           drive-strength:
  86             enum: [4, 8, 12, 16]
  87
  88         required:
  89           - groups
  90           - function
  91
  92         allOf:
  93           - if:
  94               properties:
  95                 function:
  96                   const: emmc
  97             then:
  98               properties:
  99                 groups:
 100                   enum: [emmc, emmc_rst]
 101           - if:
 102               properties:
 103                 function:
 104                   const: eth
 105             then:
 106               properties:
 107                 groups:
 108                   enum: [esw, esw_p0_p1, esw_p2_p3_p4, rgmii_via_esw,
 109                          rgmii_via_gmac1, rgmii_via_gmac2, mdc_mdio]
 110           - if:
 111               properties:
 112                 function:
 113                   const: i2c
 114             then:
 115               properties:
 116                 groups:
 117                   enum: [i2c0, i2c_0, i2c_1, i2c1_0, i2c1_1, i2c1_2, i2c2_0,
 118                          i2c2_1, i2c2_2]
 119           - if:
 120               properties:
 121                 function:
 122                   const: i2s
 123             then:
 124               properties:
 125                 groups:
 126                   enum: [i2s_in_mclk_bclk_ws, i2s1_in_data, i2s2_in_data,
 127                          i2s3_in_data, i2s4_in_data, i2s_out_mclk_bclk_ws,
 128                          i2s1_out_data, i2s2_out_data, i2s3_out_data,
 129                          i2s4_out_data]
 130           - if:
 131               properties:
 132                 function:
 133                   const: ir
 134             then:
 135               properties:
 136                 groups:
 137                   enum: [ir_0_tx, ir_1_tx, ir_2_tx, ir_0_rx, ir_1_rx, ir_2_rx]
 138           - if:
 139               properties:
 140                 function:
 141                   const: led
 142             then:
 143               properties:
 144                 groups:
 145                   enum: [ephy_leds, ephy0_led, ephy1_led, ephy2_led, ephy3_led,
 146                          ephy4_led, wled, wf2g_led, wf5g_led]
 147           - if:
 148               properties:
 149                 function:
 150                   const: flash
 151             then:
 152               properties:
 153                 groups:
 154                   enum: [par_nand, snfi, spi_nor]
 155           - if:
 156               properties:
 157                 function:
 158                   const: pcie
 159             then:
 160               properties:
 161                 groups:
 162                   enum: [pcie0_0_waken, pcie0_1_waken, pcie1_0_waken,
 163                          pcie0_0_clkreq, pcie0_1_clkreq, pcie1_0_clkreq,
 164                          pcie0_pad_perst, pcie1_pad_perst, pcie_pereset,
 165                          pcie_wake, pcie_clkreq]
 166           - if:
 167               properties:
 168                 function:
 169                   const: pmic
 170             then:
 171               properties:
 172                 groups:
 173                   enum: [pmic_bus]
 174           - if:
 175               properties:
 176                 function:
 177                   const: pwm
 178             then:
 179               properties:
 180                 groups:
 181                   enum: [pwm_ch1_0, pwm_ch1_1, pwm_ch1_2, pwm_ch2_0, pwm_ch2_1,
 182                          pwm_ch2_2, pwm_ch3_0, pwm_ch3_1, pwm_ch3_2, pwm_ch4_0,
 183                          pwm_ch4_1, pwm_ch4_2, pwm_ch4_3, pwm_ch5_0, pwm_ch5_1,
 184                          pwm_ch5_2, pwm_ch6_0, pwm_ch6_1, pwm_ch6_2, pwm_ch6_3,
 185                          pwm_ch7_0, pwm_0, pwm_1]
 186           - if:
 187               properties:
 188                 function:
 189                   const: sd
 190             then:
 191               properties:
 192                 groups:
 193                   enum: [sd_0, sd_1]
 194           - if:
 195               properties:
 196                 function:
 197                   const: spi
 198             then:
 199               properties:
 200                 groups:
 201                   enum: [spic0_0, spic0_1, spic1_0, spic1_1, spic2_0_wp_hold,
 202                          spic2_0, spi_0, spi_1, spi_wp, spi_hold]
 203           - if:
 204               properties:
 205                 function:
 206                   const: tdm
 207             then:
 208               properties:
 209                 groups:
 210                   enum: [tdm_0_out_mclk_bclk_ws, tdm_0_in_mclk_bclk_ws,
 211                          tdm_0_out_data, tdm_0_in_data, tdm_1_out_mclk_bclk_ws,
 212                          tdm_1_in_mclk_bclk_ws, tdm_1_out_data, tdm_1_in_data]
 213           - if:
 214               properties:
 215                 function:
 216                   const: uart
 217             then:
 218               properties:
 219                 groups:
 220                   enum: [uart0_0_tx_rx, uart1_0_tx_rx, uart1_0_rts_cts,
 221                          uart1_1_tx_rx, uart1_1_rts_cts, uart2_0_tx_rx,
 222                          uart2_0_rts_cts, uart2_1_tx_rx, uart2_1_rts_cts,
 223                          uart2_2_tx_rx, uart2_2_rts_cts, uart2_3_tx_rx,
 224                          uart3_0_tx_rx, uart3_1_tx_rx, uart3_1_rts_cts,
 225                          uart4_0_tx_rx, uart4_1_tx_rx, uart4_1_rts_cts,
 226                          uart4_2_tx_rx, uart4_2_rts_cts, uart0_txd_rxd,
 227                          uart1_0_txd_rxd, uart1_0_cts_rts, uart1_1_txd_rxd,
 228                          uart1_1_cts_rts, uart2_0_txd_rxd, uart2_0_cts_rts,
 229                          uart2_1_txd_rxd, uart2_1_cts_rts]
 230           - if:
 231               properties:
 232                 function:
 233                   const: watchdog
 234             then:
 235               properties:
 236                 groups:
 237                   enum: [watchdog]
 238           - if:
 239               properties:
 240                 function:
 241                   const: wifi
 242             then:
 243               properties:
 244                 groups:
 245                   enum: [wf0_2g, wf0_5g]
 246
 247       '^conf(-|$)':
 248         type: object
 249         additionalProperties: false
 250         description:
 251           pinconf configuration nodes.
 252         $ref: /schemas/pinctrl/pincfg-node.yaml
 253
 254         properties:
 255           groups:
 256             description:
 257               An array of strings. Each string contains the name of a group.
 258               Valid values are the same as the pinmux node.
 259
 260           pins:
 261             description:
 262               An array of strings. Each string contains the name of a pin.
 263             enum: [GPIO_A, I2S1_IN, I2S1_OUT, I2S_BCLK, I2S_WS, I2S_MCLK, TXD0,
 264                    RXD0, SPI_WP, SPI_HOLD, SPI_CLK, SPI_MOSI, SPI_MISO, SPI_CS,
 265                    I2C_SDA, I2C_SCL, I2S2_IN, I2S3_IN, I2S4_IN, I2S2_OUT,
 266                    I2S3_OUT, I2S4_OUT, GPIO_B, MDC, MDIO, G2_TXD0, G2_TXD1,
 267                    G2_TXD2, G2_TXD3, G2_TXEN, G2_TXC, G2_RXD0, G2_RXD1, G2_RXD2,
 268                    G2_RXD3, G2_RXDV, G2_RXC, NCEB, NWEB, NREB, NDL4, NDL5, NDL6,
 269                    NDL7, NRB, NCLE, NALE, NDL0, NDL1, NDL2, NDL3, MDI_TP_P0,
 270                    MDI_TN_P0, MDI_RP_P0, MDI_RN_P0, MDI_TP_P1, MDI_TN_P1,
 271                    MDI_RP_P1, MDI_RN_P1, MDI_RP_P2, MDI_RN_P2, MDI_TP_P2,
 272                    MDI_TN_P2, MDI_TP_P3, MDI_TN_P3, MDI_RP_P3, MDI_RN_P3,
 273                    MDI_RP_P4, MDI_RN_P4, MDI_TP_P4, MDI_TN_P4, PMIC_SCL,
 274                    PMIC_SDA, SPIC1_CLK, SPIC1_MOSI, SPIC1_MISO, SPIC1_CS,
 275                    GPIO_D, WATCHDOG, RTS3_N, CTS3_N, TXD3, RXD3, PERST0_N,
 276                    PERST1_N, WLED_N, EPHY_LED0_N, AUXIN0, AUXIN1, AUXIN2,
 277                    AUXIN3, TXD4, RXD4, RTS4_N, CST4_N, PWM1, PWM2, PWM3, PWM4,
 278                    PWM5, PWM6, PWM7, GPIO_E, TOP_5G_CLK, TOP_5G_DATA,
 279                    WF0_5G_HB0, WF0_5G_HB1, WF0_5G_HB2, WF0_5G_HB3, WF0_5G_HB4,
 280                    WF0_5G_HB5, WF0_5G_HB6, XO_REQ, TOP_RST_N, SYS_WATCHDOG,
 281                    EPHY_LED0_N_JTDO, EPHY_LED1_N_JTDI, EPHY_LED2_N_JTMS,
 282                    EPHY_LED3_N_JTCLK, EPHY_LED4_N_JTRST_N, WF2G_LED_N,
 283                    WF5G_LED_N, GPIO_9, GPIO_10, GPIO_11, GPIO_12, UART1_TXD,
 284                    UART1_RXD, UART1_CTS, UART1_RTS, UART2_TXD, UART2_RXD,
 285                    UART2_CTS, UART2_RTS, SMI_MDC, SMI_MDIO, PCIE_PERESET_N,
 286                    PWM_0, GPIO_0, GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5,
 287                    GPIO_6, GPIO_7, GPIO_8, UART0_TXD, UART0_RXD, TOP_2G_CLK,
 288                    TOP_2G_DATA, WF0_2G_HB0, WF0_2G_HB1, WF0_2G_HB2, WF0_2G_HB3,
 289                    WF0_2G_HB4, WF0_2G_HB5, WF0_2G_HB6]
 290
 291           bias-disable: true
 292
 293           bias-pull-up: true
 294
 295           bias-pull-down: true
 296
 297           input-enable: true
 298
 299           input-disable: true
 300
 301           output-enable: true
 302
 303           output-low: true
 304
 305           output-high: true
 306
 307           input-schmitt-enable: true
 308
 309           input-schmitt-disable: true
 310
 311           drive-strength:
 312             enum: [4, 8, 12, 16]
 313
 314           slew-rate:
 315             enum: [0, 1]
 316
 317           mediatek,tdsel:
 318             description:
 319               An integer describing the steps for output level shifter duty
 320               cycle when asserted (high pulse width adjustment). Valid arguments
 321               are from 0 to 15.
 322             $ref: /schemas/types.yaml#/definitions/uint32
 323
 324           mediatek,rdsel:
 325             description:
 326               An integer describing the steps for input level shifter duty cycle
 327               when asserted (high pulse width adjustment). Valid arguments are
 328               from 0 to 63.
 329             $ref: /schemas/types.yaml#/definitions/uint32
 330
 331         required:
 332           - pins
 333
 334 additionalProperties: false
 335
 336 examples:
 337   - |
 338     #include <dt-bindings/interrupt-controller/irq.h>
 339     #include <dt-bindings/interrupt-controller/arm-gic.h>
 340
 341     soc {
 342         #address-cells = <2>;
 343         #size-cells = <2>;
 344
 345         pio: pinctrl@10211000 {
 346           compatible = "mediatek,mt7622-pinctrl";
 347           reg = <0 0x10211000 0 0x1000>;
 348           gpio-controller;
 349           #gpio-cells = <2>;
 350
 351           pinctrl_eth_default: eth-pins {
 352             mux-mdio {
 353               groups = "mdc_mdio";
 354               function = "eth";
 355               drive-strength = <12>;
 356             };
 357
 358             mux-gmac2 {
 359               groups = "rgmii_via_gmac2";
 360               function = "eth";
 361               drive-strength = <12>;
 362             };
 363
 364             mux-esw {
 365               groups = "esw";
 366               function = "eth";
 367               drive-strength = <8>;
 368             };
 369
 370             conf-mdio {
 371               pins = "MDC";
 372               bias-pull-up;
 373             };
 374           };
 375         };
 376     };