Bindings/pinctrl/mediatek,mt8192-pinctrl.yaml

   1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
   2 %YAML 1.2
   3 ---
   4 $id: http://devicetree.org/schemas/pinctrl/mediatek,mt8192-pinctrl.yaml#
   5 $schema: http://devicetree.org/meta-schemas/core.yaml#
   6
   7 title: MediaTek MT8192 Pin Controller
   8
   9 maintainers:
  10   - Sean Wang <sean.wang@mediatek.com>
  11
  12 description:
  13   The MediaTek's MT8192 Pin controller is used to control SoC pins.
  14
  15 properties:
  16   compatible:
  17     const: mediatek,mt8192-pinctrl
  18
  19   gpio-controller: true
  20
  21   '#gpio-cells':
  22     description:
  23       Number of cells in GPIO specifier. Since the generic GPIO binding is used,
  24       the amount of cells must be specified as 2. See the below mentioned gpio
  25       binding representation for description of particular cells.
  26     const: 2
  27
  28   gpio-ranges:
  29     description: GPIO valid number range.
  30     maxItems: 1
  31
  32   gpio-line-names: true
  33
  34   reg:
  35     description:
  36       Physical address base for GPIO base registers. There are 11 GPIO physical
  37       address base in mt8192.
  38     maxItems: 11
  39
  40   reg-names:
  41     description:
  42       GPIO base register names.
  43     maxItems: 11
  44
  45   interrupt-controller: true
  46
  47   '#interrupt-cells':
  48     const: 2
  49
  50   interrupts:
  51     description: The interrupt outputs to sysirq.
  52     maxItems: 1
  53
  54 # PIN CONFIGURATION NODES
  55 patternProperties:
  56   '-pins$':
  57     type: object
  58     additionalProperties: false
  59     patternProperties:
  60       '^pins':
  61         type: object
  62         description:
  63           A pinctrl node should contain at least one subnodes representing the
  64           pinctrl groups available on the machine. Each subnode will list the
  65           pins it needs, and how they should be configured, with regard to muxer
  66           configuration, pullups, drive strength, input enable/disable and input
  67           schmitt.
  68         $ref: pinmux-node.yaml
  69
  70         properties:
  71           pinmux:
  72             description:
  73               Integer array, represents gpio pin number and mux setting.
  74               Supported pin number and mux varies for different SoCs, and are
  75               defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly.
  76
  77           drive-strength:
  78             description:
  79               It can support some arguments, such as MTK_DRIVE_4mA,
  80               MTK_DRIVE_6mA, etc. See dt-bindings/pinctrl/mt65xx.h. It can only
  81               support 2/4/6/8/10/12/14/16mA in mt8192.
  82             enum: [2, 4, 6, 8, 10, 12, 14, 16]
  83
  84           drive-strength-microamp:
  85             enum: [125, 250, 500, 1000]
  86
  87           bias-pull-down:
  88             oneOf:
  89               - type: boolean
  90                 description: normal pull down.
  91               - enum: [100, 101, 102, 103]
  92                 description: PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0_
  93                   defines in dt-bindings/pinctrl/mt65xx.h.
  94               - enum: [200, 201, 202, 203]
  95                 description: RSEL pull down type. See MTK_PULL_SET_RSEL_ defines
  96                   in dt-bindings/pinctrl/mt65xx.h.
  97
  98           bias-pull-up:
  99             oneOf:
 100               - type: boolean
 101                 description: normal pull up.
 102               - enum: [100, 101, 102, 103]
 103                 description: PUPD/R1/R0 pull up type. See MTK_PUPD_SET_R1R0_
 104                   defines in dt-bindings/pinctrl/mt65xx.h.
 105               - enum: [200, 201, 202, 203]
 106                 description: RSEL pull up type. See MTK_PULL_SET_RSEL_ defines
 107                   in dt-bindings/pinctrl/mt65xx.h.
 108
 109           bias-disable: true
 110
 111           output-high: true
 112
 113           output-low: true
 114
 115           input-enable: true
 116
 117           input-disable: true
 118
 119           input-schmitt-enable: true
 120
 121           input-schmitt-disable: true
 122
 123         required:
 124           - pinmux
 125
 126         additionalProperties: false
 127
 128 allOf:
 129   - $ref: pinctrl.yaml#
 130
 131 required:
 132   - compatible
 133   - reg
 134   - interrupts
 135   - interrupt-controller
 136   - '#interrupt-cells'
 137   - gpio-controller
 138   - '#gpio-cells'
 139   - gpio-ranges
 140
 141 additionalProperties: false
 142
 143 examples:
 144   - |
 145             #include <dt-bindings/pinctrl/mt8192-pinfunc.h>
 146             #include <dt-bindings/interrupt-controller/arm-gic.h>
 147             pio: pinctrl@10005000 {
 148                     compatible = "mediatek,mt8192-pinctrl";
 149                     reg = <0x10005000 0x1000>,
 150                           <0x11c20000 0x1000>,
 151                           <0x11d10000 0x1000>,
 152                           <0x11d30000 0x1000>,
 153                           <0x11d40000 0x1000>,
 154                           <0x11e20000 0x1000>,
 155                           <0x11e70000 0x1000>,
 156                           <0x11ea0000 0x1000>,
 157                           <0x11f20000 0x1000>,
 158                           <0x11f30000 0x1000>,
 159                           <0x1000b000 0x1000>;
 160                     reg-names = "iocfg0", "iocfg_rm", "iocfg_bm",
 161                           "iocfg_bl", "iocfg_br", "iocfg_lm",
 162                           "iocfg_lb", "iocfg_rt", "iocfg_lt",
 163                           "iocfg_tl", "eint";
 164                     gpio-controller;
 165                     #gpio-cells = <2>;
 166                     gpio-ranges = <&pio 0 0 220>;
 167                     interrupt-controller;
 168                     interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH 0>;
 169                     #interrupt-cells = <2>;
 170
 171                     spi1-default-pins {
 172                             pins-cs-mosi-clk {
 173                                     pinmux = <PINMUX_GPIO157__FUNC_SPI1_A_CSB>,
 174                                              <PINMUX_GPIO159__FUNC_SPI1_A_MO>,
 175                                              <PINMUX_GPIO156__FUNC_SPI1_A_CLK>;
 176                                     bias-disable;
 177                             };
 178
 179                             pins-miso {
 180                                     pinmux = <PINMUX_GPIO158__FUNC_SPI1_A_MI>;
 181                                     bias-pull-down;
 182                             };
 183                     };
 184             };