Bindings/pinctrl/qcom,msm8994-pinctrl.yaml

   1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
   2 %YAML 1.2
   3 ---
   4 $id: http://devicetree.org/schemas/pinctrl/qcom,msm8994-pinctrl.yaml#
   5 $schema: http://devicetree.org/meta-schemas/core.yaml#
   6
   7 title: Qualcomm MSM8994 TLMM pin controller
   8
   9 maintainers:
  10   - Bjorn Andersson <andersson@kernel.org>
  11   - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
  12
  13 description:
  14   Top Level Mode Multiplexer pin controller in Qualcomm MSM8994 SoC.
  15
  16 properties:
  17   compatible:
  18     enum:
  19       - qcom,msm8992-pinctrl
  20       - qcom,msm8994-pinctrl
  21
  22   reg:
  23     maxItems: 1
  24
  25   interrupts:
  26     maxItems: 1
  27
  28   interrupt-controller: true
  29   "#interrupt-cells": true
  30   gpio-controller: true
  31   "#gpio-cells": true
  32   gpio-ranges: true
  33   wakeup-parent: true
  34
  35   gpio-reserved-ranges:
  36     minItems: 1
  37     maxItems: 73
  38
  39   gpio-line-names:
  40     maxItems: 146
  41
  42 patternProperties:
  43   "-state$":
  44     oneOf:
  45       - $ref: "#/$defs/qcom-msm8994-tlmm-state"
  46       - patternProperties:
  47           "-pins$":
  48             $ref: "#/$defs/qcom-msm8994-tlmm-state"
  49         additionalProperties: false
  50
  51 $defs:
  52   qcom-msm8994-tlmm-state:
  53     type: object
  54     description:
  55       Pinctrl node's client devices use subnodes for desired pin configuration.
  56       Client device subnodes use below standard properties.
  57     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
  58     unevaluatedProperties: false
  59
  60     properties:
  61       pins:
  62         description:
  63           List of gpio pins affected by the properties specified in this
  64           subnode.
  65         items:
  66           oneOf:
  67             - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-3][0-9]|14[0-5])$"
  68             - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk,
  69                       sdc2_cmd, sdc2_data, sdc3_clk, sdc3_cmd, sdc3_data ]
  70         minItems: 1
  71         maxItems: 36
  72
  73       function:
  74         description:
  75           Specify the alternative function to be configured for the specified
  76           pins.
  77
  78         enum: [ gpio, audio_ref_clk, blsp_i2c1, blsp_i2c2, blsp_i2c3,
  79                 blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8,
  80                 blsp_i2c9, blsp_i2c10, blsp_i2c11, blsp_i2c12, blsp_spi1,
  81                 blsp_spi1_cs1, blsp_spi1_cs2, blsp_spi1_cs3, blsp_spi2,
  82                 blsp_spi2_cs1, blsp_spi2_cs2, blsp_spi2_cs3, blsp_spi3,
  83                 blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7, blsp_spi8,
  84                 blsp_spi9, blsp_spi10, blsp_spi10_cs1, blsp_spi10_cs2,
  85                 blsp_spi10_cs3, blsp_spi11, blsp_spi12, blsp_uart1, blsp_uart2,
  86                 blsp_uart3, blsp_uart4, blsp_uart5, blsp_uart6, blsp_uart7,
  87                 blsp_uart8, blsp_uart9, blsp_uart10, blsp_uart11, blsp_uart12,
  88                 blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim4, blsp_uim5,
  89                 blsp_uim6, blsp_uim7, blsp_uim8, blsp_uim9, blsp_uim10,
  90                 blsp_uim11, blsp_uim12, blsp11_i2c_scl_b, blsp11_i2c_sda_b,
  91                 blsp11_uart_rx_b, blsp11_uart_tx_b, cam_mclk0, cam_mclk1,
  92                 cam_mclk2, cam_mclk3, cci_async_in0, cci_async_in1,
  93                 cci_async_in2, cci_i2c0, cci_i2c1, cci_timer0, cci_timer1,
  94                 cci_timer2, cci_timer3, cci_timer4, gcc_gp1_clk_a,
  95                 gcc_gp1_clk_b, gcc_gp2_clk_a, gcc_gp2_clk_b, gcc_gp3_clk_a,
  96                 gcc_gp3_clk_b, gp_mn, gp_pdm0, gp_pdm1, gp_pdm2, gp0_clk,
  97                 gp1_clk, gps_tx, gsm_tx, hdmi_cec, hdmi_ddc, hdmi_hpd,
  98                 hdmi_rcv, mdp_vsync, mss_lte, nav_pps, nav_tsync,
  99                 qdss_cti_trig_in_a, qdss_cti_trig_in_b, qdss_cti_trig_in_c,
 100                 qdss_cti_trig_in_d, qdss_cti_trig_out_a, qdss_cti_trig_out_b,
 101                 qdss_cti_trig_out_c, qdss_cti_trig_out_d, qdss_traceclk_a,
 102                 qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b,
 103                 qdss_tracedata_a, qdss_tracedata_b, qua_mi2s, pci_e0, pci_e1,
 104                 pri_mi2s, sdc4, sec_mi2s, slimbus, spkr_i2s, ter_mi2s, tsif1,
 105                 tsif2, uim_batt_alarm, uim1, uim2, uim3, uim4 ]
 106
 107     required:
 108       - pins
 109
 110 allOf:
 111   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 112
 113 required:
 114   - compatible
 115   - reg
 116
 117 additionalProperties: false
 118
 119 examples:
 120   - |
 121     #include <dt-bindings/interrupt-controller/arm-gic.h>
 122
 123     tlmm: pinctrl@fd510000 {
 124         compatible = "qcom,msm8994-pinctrl";
 125         reg = <0xfd510000 0x4000>;
 126         interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 127         gpio-controller;
 128         gpio-ranges = <&tlmm 0 0 146>;
 129         #gpio-cells = <2>;
 130         interrupt-controller;
 131         #interrupt-cells = <2>;
 132
 133         blsp1-uart2-default-state {
 134             function = "blsp_uart2";
 135             pins = "gpio4", "gpio5";
 136             drive-strength = <16>;
 137             bias-disable;
 138         };
 139
 140         blsp1-spi1-default-state {
 141             default-pins {
 142                 pins = "gpio0", "gpio1", "gpio3";
 143                 function = "blsp_spi1";
 144                 drive-strength = <10>;
 145                 bias-pull-down;
 146             };
 147
 148             cs-pins {
 149                 pins = "gpio8";
 150                 function = "gpio";
 151                 drive-strength = <2>;
 152                 bias-disable;
 153             };
 154         };
 155     };