Bindings/pinctrl/qcom,sdm670-tlmm.yaml

   1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
   2 %YAML 1.2
   3 ---
   4 $id: http://devicetree.org/schemas/pinctrl/qcom,sdm670-tlmm.yaml#
   5 $schema: http://devicetree.org/meta-schemas/core.yaml#
   6
   7 title: Qualcomm Technologies, Inc. SDM670 TLMM block
   8
   9 maintainers:
  10   - Richard Acayan <mailingradian@gmail.com>
  11
  12 description: |
  13   The Top Level Mode Multiplexer (TLMM) block found in the SDM670 platform.
  14
  15 allOf:
  16   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
  17
  18 properties:
  19   compatible:
  20     const: qcom,sdm670-tlmm
  21
  22   reg:
  23     maxItems: 1
  24
  25   interrupts:
  26     maxItems: 1
  27
  28   interrupt-controller: true
  29   "#interrupt-cells": true
  30   gpio-controller: true
  31   gpio-reserved-ranges:
  32     minItems: 1
  33     maxItems: 75
  34
  35   "#gpio-cells": true
  36   gpio-ranges: true
  37   wakeup-parent: true
  38
  39 required:
  40   - compatible
  41   - reg
  42
  43 additionalProperties: false
  44
  45 patternProperties:
  46   "-state$":
  47     oneOf:
  48       - $ref: "#/$defs/qcom-sdm670-tlmm-state"
  49       - patternProperties:
  50           "-pins$":
  51             $ref: "#/$defs/qcom-sdm670-tlmm-state"
  52         additionalProperties: false
  53
  54 $defs:
  55   qcom-sdm670-tlmm-state:
  56     type: object
  57     description:
  58       Pinctrl node's client devices use subnodes for desired pin configuration.
  59       Client device subnodes use below standard properties.
  60     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
  61     unevaluatedProperties: false
  62
  63     properties:
  64       pins:
  65         description:
  66           List of gpio pins affected by the properties specified in this
  67           subnode.
  68         items:
  69           oneOf:
  70             - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$"
  71             - enum: [ ufs_reset, sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data,
  72                       sdc2_clk, sdc2_cmd, sdc2_data ]
  73         minItems: 1
  74         maxItems: 36
  75
  76       function:
  77         description:
  78           Specify the alternative function to be configured for the specified
  79           pins.
  80
  81         enum: [ adsp_ext, agera_pll, atest_char, atest_tsens, atest_tsens2, atest_usb1, atest_usb10,
  82                 atest_usb11, atest_usb12, atest_usb13, atest_usb2, atest_usb20, atest_usb21,
  83                 atest_usb22, atest_usb23, cam_mclk, cci_async, cci_i2c, cci_timer0, cci_timer1,
  84                 cci_timer2, cci_timer3, cci_timer4, copy_gp, copy_phase, dbg_out, ddr_bist,
  85                 ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, edp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3,
  86                 gp_pdm0, gp_pdm1, gp_pdm2, gpio, gps_tx, jitter_bist, ldo_en, ldo_update,
  87                 lpass_slimbus, m_voc, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3,
  88                 mss_lte, nav_pps, pa_indicator, pci_e0, pci_e1, phase_flag, pll_bist, pll_bypassnl,
  89                 pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc, qdss_cti, qdss, qlink_enable,
  90                 qlink_request, qua_mi2s, qup0, qup1, qup10, qup11, qup12, qup13, qup14, qup15, qup2,
  91                 qup3, qup4, qup5, qup6, qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sdc4_clk,
  92                 sdc4_cmd, sdc4_data, sd_write, sec_mi2s, ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2,
  93                 tgu_ch3, tsif1_clk, tsif1_data, tsif1_en, tsif1_error, tsif1_sync, tsif2_clk,
  94                 tsif2_data, tsif2_en, tsif2_error, tsif2_sync, uim1_clk, uim1_data, uim1_present,
  95                 uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset, uim_batt, usb_phy, vfr_1,
  96                 vsense_trigger, wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk, wsa_data, ]
  97
  98     required:
  99       - pins
 100
 101 examples:
 102   - |
 103     #include <dt-bindings/interrupt-controller/arm-gic.h>
 104     pinctrl@3400000 {
 105         compatible = "qcom,sdm670-tlmm";
 106         reg = <0x03400000 0x300000>;
 107         interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 108         gpio-controller;
 109         #gpio-cells = <2>;
 110         interrupt-controller;
 111         #interrupt-cells = <2>;
 112         gpio-ranges = <&tlmm 0 0 151>;
 113
 114         qup-i2c9-state {
 115             pins = "gpio6", "gpio7";
 116             function = "qup9";
 117         };
 118     };
 119 ...