Bindings/pinctrl/qcom,sm6125-tlmm.yaml

   1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
   2 %YAML 1.2
   3 ---
   4 $id: http://devicetree.org/schemas/pinctrl/qcom,sm6125-tlmm.yaml#
   5 $schema: http://devicetree.org/meta-schemas/core.yaml#
   6 title: Qualcomm Technologies, Inc. SM6125 TLMM block
   7
   8 maintainers:
   9   - Martin Botka <martin.botka@somainline.org>
  10
  11 description:
  12   Top Level Mode Multiplexer pin controller in Qualcomm SM6125 SoC.
  13
  14 allOf:
  15   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
  16
  17 properties:
  18   compatible:
  19     const: qcom,sm6125-tlmm
  20
  21   reg:
  22     maxItems: 3
  23
  24   reg-names:
  25     items:
  26       - const: west
  27       - const: south
  28       - const: east
  29
  30   interrupts:
  31     maxItems: 1
  32
  33   interrupt-controller: true
  34   "#interrupt-cells": true
  35   gpio-controller: true
  36   gpio-reserved-ranges: true
  37   "#gpio-cells": true
  38   gpio-ranges: true
  39   wakeup-parent: true
  40
  41 required:
  42   - compatible
  43   - reg
  44   - reg-names
  45
  46 additionalProperties: false
  47
  48 patternProperties:
  49   "-state$":
  50     oneOf:
  51       - $ref: "#/$defs/qcom-sm6125-tlmm-state"
  52       - patternProperties:
  53           "-pins$":
  54             $ref: "#/$defs/qcom-sm6125-tlmm-state"
  55         additionalProperties: false
  56
  57 $defs:
  58   qcom-sm6125-tlmm-state:
  59     type: object
  60     description:
  61       Pinctrl node's client devices use subnodes for desired pin configuration.
  62       Client device subnodes use below standard properties.
  63     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
  64     unevaluatedProperties: false
  65
  66     properties:
  67       pins:
  68         description:
  69           List of gpio pins affected by the properties specified in this
  70           subnode.
  71         items:
  72           oneOf:
  73             - pattern: "^gpio[0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-2]$"
  74             - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
  75         minItems: 1
  76         maxItems: 36
  77
  78       function:
  79         description:
  80           Specify the alternative function to be configured for the specified
  81           pins.
  82
  83         enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1,
  84                 atest_char2, atest_char3, atest_tsens, atest_tsens2, atest_usb1,
  85                 atest_usb10, atest_usb11, atest_usb12, atest_usb13, atest_usb2,
  86                 atest_usb20, atest_usb21, atest_usb22, atest_usb23, aud_sb,
  87                 audio_ref, cam_mclk, cci_async, cci_i2c, cci_timer0, cci_timer1,
  88                 cci_timer2, cci_timer3, cci_timer4, copy_gp, copy_phase, cri_trng,
  89                 cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
  90                 ddr_pxi2, ddr_pxi3, debug_hot, dmic0_clk, dmic0_data, dmic1_clk,
  91                 dmic1_data, dp_hot, edp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3,
  92                 gp_pdm0, gp_pdm1, gp_pdm2, gpio, gps_tx, jitter_bist, ldo_en,
  93                 ldo_update, m_voc, mclk1, mclk2, mdp_vsync, mdp_vsync0, mdp_vsync1,
  94                 mdp_vsync2, mdp_vsync3, mdp_vsync4, mdp_vsync5, mpm_pwr, mss_lte,
  95                 nav_pps, pa_indicator, phase_flag, pll_bist, pll_bypassnl, pll_reset,
  96                 pri_mi2s, pri_mi2s_ws, prng_rosc, qca_sb, qdss_cti, qdss, qlink_enable,
  97                 qlink_request, qua_mi2s, qui_mi2s, qup00, qup01, qup02, qup03, qup04,
  98                 qup10, qup11, qup12, qup13, qup14, sd_write, sec_mi2s, sp_cmu, swr_rx,
  99                 swr_tx, ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm,
 100                 uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data,
 101                 uim2_present, uim2_reset, unused1, unused2, usb_phy, vfr_1, vsense_trigger,
 102                 wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk, wsa_data ]
 103
 104
 105     required:
 106       - pins
 107
 108 examples:
 109   - |
 110     #include <dt-bindings/interrupt-controller/arm-gic.h>
 111     pinctrl@500000 {
 112         compatible = "qcom,sm6125-tlmm";
 113         reg = <0x00500000 0x400000>,
 114               <0x00900000 0x400000>,
 115               <0x00d00000 0x400000>;
 116         reg-names = "west", "south", "east";
 117         interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
 118         gpio-controller;
 119         gpio-ranges = <&tlmm 0 0 134>;
 120         #gpio-cells = <2>;
 121         interrupt-controller;
 122         #interrupt-cells = <2>;
 123
 124         sdc2-off-state {
 125             clk-pins {
 126                 pins = "sdc2_clk";
 127                 drive-strength = <2>;
 128                 bias-disable;
 129             };
 130
 131             cmd-pins {
 132                 pins = "sdc2_cmd";
 133                 drive-strength = <2>;
 134                 bias-pull-up;
 135             };
 136
 137             data-pins {
 138                 pins = "sdc2_data";
 139                 drive-strength = <2>;
 140                 bias-pull-up;
 141             };
 142         };
 143     };