Bindings/pinctrl/qcom,sm6375-tlmm.yaml

   1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
   2 %YAML 1.2
   3 ---
   4 $id: http://devicetree.org/schemas/pinctrl/qcom,sm6375-tlmm.yaml#
   5 $schema: http://devicetree.org/meta-schemas/core.yaml#
   6
   7 title: Qualcomm Technologies, Inc. SM6375 TLMM block
   8
   9 maintainers:
  10   - Konrad Dybcio <konrad.dybcio@somainline.org>
  11
  12 description:
  13   Top Level Mode Multiplexer pin controller in Qualcomm SM6375 SoC.
  14
  15 allOf:
  16   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
  17
  18 properties:
  19   compatible:
  20     const: qcom,sm6375-tlmm
  21
  22   reg:
  23     maxItems: 1
  24
  25   interrupts:
  26     maxItems: 1
  27
  28   interrupt-controller: true
  29   "#interrupt-cells": true
  30   gpio-controller: true
  31   gpio-reserved-ranges: true
  32   "#gpio-cells": true
  33   gpio-ranges: true
  34   wakeup-parent: true
  35
  36 required:
  37   - compatible
  38   - reg
  39
  40 additionalProperties: false
  41
  42 patternProperties:
  43   "-state$":
  44     oneOf:
  45       - $ref: "#/$defs/qcom-sm6375-tlmm-state"
  46       - patternProperties:
  47           "-pins$":
  48             $ref: "#/$defs/qcom-sm6375-tlmm-state"
  49         additionalProperties: false
  50
  51 $defs:
  52   qcom-sm6375-tlmm-state:
  53     type: object
  54     description:
  55       Pinctrl node's client devices use subnodes for desired pin configuration.
  56       Client device subnodes use below standard properties.
  57     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
  58     unevaluatedProperties: false
  59
  60     properties:
  61       pins:
  62         description:
  63           List of gpio pins affected by the properties specified in this
  64           subnode.
  65         items:
  66           oneOf:
  67             - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-5])$"
  68             - enum: [ ufs_reset, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk,
  69                       sdc2_cmd, sdc2_data ]
  70         minItems: 1
  71         maxItems: 36
  72
  73       function:
  74         description:
  75           Specify the alternative function to be configured for the specified
  76           pins.
  77
  78         enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1,
  79                 atest_char2, atest_char3, atest_tsens, atest_tsens2,
  80                 atest_usb1, atest_usb10, atest_usb11, atest_usb12,
  81                 atest_usb13, atest_usb2, atest_usb20, atest_usb21,
  82                 atest_usb22, atest_usb23, audio_ref, btfm_slimbus, cam_mclk,
  83                 cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2,
  84                 cci_timer3, cci_timer4, cri_trng, dbg_out, ddr_bist,
  85                 ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, dp_hot, edp_lcd,
  86                 gcc_gp1, gcc_gp2, gcc_gp3, gp_pdm0, gp_pdm1, gp_pdm2, gpio,
  87                 gps_tx, ibi_i3c, jitter_bist, ldo_en, ldo_update, lpass_ext,
  88                 m_voc, mclk, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
  89                 mdp_vsync3, mi2s_0, mi2s_1, mi2s_2, mss_lte, nav_gpio,
  90                 nav_pps, pa_indicator, phase_flag0, phase_flag1, phase_flag10,
  91                 phase_flag11, phase_flag12, phase_flag13, phase_flag14,
  92                 phase_flag15, phase_flag16, phase_flag17, phase_flag18,
  93                 phase_flag19, phase_flag2, phase_flag20, phase_flag21,
  94                 phase_flag22, phase_flag23, phase_flag24, phase_flag25,
  95                 phase_flag26, phase_flag27, phase_flag28, phase_flag29,
  96                 phase_flag3, phase_flag30, phase_flag31, phase_flag4,
  97                 phase_flag5, phase_flag6, phase_flag7, phase_flag8,
  98                 phase_flag9, pll_bist, pll_bypassnl, pll_clk, pll_reset,
  99                 prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti,
 100                 qdss_gpio, qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11,
 101                 qdss_gpio12, qdss_gpio13, qdss_gpio14, qdss_gpio15,
 102                 qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6,
 103                 qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable,
 104                 qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request,
 105                 qlink1_wmss, qup00, qup01, qup02, qup10, qup11_f1, qup11_f2,
 106                 qup12, qup13_f1, qup13_f2, qup14, sd_write, sdc1_tb, sdc2_tb,
 107                 sp_cmu, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1,
 108                 tsense_pwm2, uim1_clk, uim1_data, uim1_present, uim1_reset,
 109                 uim2_clk, uim2_data, uim2_present, uim2_reset, usb2phy_ac,
 110                 usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1,
 111                 wlan2_adc0, wlan2_adc1 ]
 112
 113     required:
 114       - pins
 115
 116 examples:
 117   - |
 118     #include <dt-bindings/interrupt-controller/arm-gic.h>
 119     pinctrl@500000 {
 120         compatible = "qcom,sm6375-tlmm";
 121         reg = <0x00500000 0x800000>;
 122         interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
 123         gpio-controller;
 124         #gpio-cells = <2>;
 125         interrupt-controller;
 126         #interrupt-cells = <2>;
 127         gpio-ranges = <&tlmm 0 0 157>; /* GPIOs + ufs_reset */
 128
 129         gpio-wo-subnode-state {
 130             pins = "gpio1";
 131             function = "gpio";
 132         };
 133
 134         uart-w-subnodes-state {
 135             rx-pins {
 136                 pins = "gpio18";
 137                 function = "qup13_f2";
 138                 bias-pull-up;
 139             };
 140
 141             tx-pins {
 142                 pins = "gpio19";
 143                 function = "qup13_f2";
 144                 bias-disable;
 145             };
 146         };
 147     };
 148 ...