Bindings/regulator/richtek,rt6190.yaml

   1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
   2 %YAML 1.2
   3 ---
   4 $id: http://devicetree.org/schemas/regulator/richtek,rt6190.yaml#
   5 $schema: http://devicetree.org/meta-schemas/core.yaml#
   6
   7 title: Richtek RT6190 4-Switch BuckBoost controller
   8
   9 maintainers:
  10   - ChiYuan Huang <cy_huang@richtek.com>
  11
  12 description: |
  13   The RT6190 is 4-Switch BuckBoost controller designed for converting input
  14   voltage to output voltage that can be equal to, higher or lower than input
  15   voltage. It operates with wide input voltage range from 4.5V to 36V, and
  16   the output voltage can be set from 3V to 36V by external FB pin. It's commonly
  17   used for the application like as BuckBoost bus supply, docking station and USB
  18   power delivery product.
  19
  20   Datasheet is available at
  21   https://www.richtek.com/assets/product_file/RT6190/DS6190-02.pdf
  22
  23 allOf:
  24   - $ref: regulator.yaml#
  25
  26 properties:
  27   compatible:
  28     enum:
  29       - richtek,rt6190
  30
  31   reg:
  32     maxItems: 1
  33
  34   enable-gpios:
  35     maxItems: 1
  36
  37   wakeup-source: true
  38
  39   interrupts:
  40     maxItems: 1
  41
  42   regulator-allowed-modes:
  43     description: |
  44       buck allowed operating mode
  45         0: PSM mode (light load Power Saving Mode)
  46         1: FCCM mode (Forced-CCM mode)
  47     maxItems: 2
  48     items:
  49       enum: [0, 1]
  50
  51 required:
  52   - compatible
  53   - reg
  54
  55 unevaluatedProperties: false
  56
  57 examples:
  58   - |
  59     #include <dt-bindings/gpio/gpio.h>
  60     #include <dt-bindings/interrupt-controller/irq.h>
  61
  62     i2c {
  63       #address-cells = <1>;
  64       #size-cells = <0>;
  65
  66       regulator@2c {
  67         compatible = "richtek,rt6190";
  68         reg = <0x2c>;
  69         wakeup-source;
  70         interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>;
  71         enable-gpios = <&gpio26 1 GPIO_ACTIVE_HIGH>;
  72         regulator-name = "richtek,rt6190-buckboost";
  73         regulator-min-microvolt = <3000000>;
  74         regulator-max-microvolt = <32000000>;
  75         regulator-min-microamp = <306000>;
  76         regulator-max-microamp = <12114000>;
  77         regulator-allowed-modes = <0 1>;
  78       };
  79     };