Bindings/rtc/qcom-pm8xxx-rtc.yaml

   1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
   2 %YAML 1.2
   3 ---
   4 $id: http://devicetree.org/schemas/rtc/qcom-pm8xxx-rtc.yaml#
   5 $schema: http://devicetree.org/meta-schemas/core.yaml#
   6
   7 title: Qualcomm PM8xxx PMIC RTC device
   8
   9 maintainers:
  10   - Satya Priya <quic_c_skakit@quicinc.com>
  11
  12 properties:
  13   compatible:
  14     oneOf:
  15       - enum:
  16           - qcom,pm8058-rtc
  17           - qcom,pm8921-rtc
  18           - qcom,pm8941-rtc
  19           - qcom,pmk8350-rtc
  20       - items:
  21           - enum:
  22               - qcom,pm8018-rtc
  23           - const: qcom,pm8921-rtc
  24
  25   reg:
  26     minItems: 1
  27     maxItems: 2
  28
  29   reg-names:
  30     minItems: 1
  31     items:
  32       - const: rtc
  33       - const: alarm
  34
  35   interrupts:
  36     maxItems: 1
  37
  38   allow-set-time:
  39     $ref: /schemas/types.yaml#/definitions/flag
  40     description:
  41       Indicates that the setting of RTC time is allowed by the host CPU.
  42
  43   nvmem-cells:
  44     items:
  45       - description:
  46           four-byte nvmem cell holding a little-endian offset from the Unix
  47           epoch representing the time when the RTC timer was last reset
  48
  49   nvmem-cell-names:
  50     items:
  51       - const: offset
  52
  53   wakeup-source: true
  54
  55 required:
  56   - compatible
  57   - reg
  58   - interrupts
  59
  60 additionalProperties: false
  61
  62 examples:
  63   - |
  64     #include <dt-bindings/interrupt-controller/irq.h>
  65     #include <dt-bindings/spmi/spmi.h>
  66
  67     spmi {
  68         #address-cells = <2>;
  69         #size-cells = <0>;
  70
  71         pmic@0 {
  72             compatible = "qcom,pm8941", "qcom,spmi-pmic";
  73             reg = <0x0 SPMI_USID>;
  74             #address-cells = <1>;
  75             #size-cells = <0>;
  76
  77             rtc@6000 {
  78                 compatible = "qcom,pm8941-rtc";
  79                 reg = <0x6000>, <0x6100>;
  80                 reg-names = "rtc", "alarm";
  81                 interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
  82                 nvmem-cells = <&rtc_offset>;
  83                 nvmem-cell-names = "offset";
  84             };
  85         };
  86     };
  87 ...