Bindings/serial/atmel,at91-usart.yaml

   1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
   2 # Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
   3 %YAML 1.2
   4 ---
   5 $id: http://devicetree.org/schemas/serial/atmel,at91-usart.yaml#
   6 $schema: http://devicetree.org/meta-schemas/core.yaml#
   7
   8 title: Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART)
   9
  10 maintainers:
  11   - Richard Genoud <richard.genoud@gmail.com>
  12
  13 properties:
  14   compatible:
  15     oneOf:
  16       - enum:
  17           - atmel,at91rm9200-usart
  18           - atmel,at91sam9260-usart
  19       - items:
  20           - const: atmel,at91rm9200-dbgu
  21           - const: atmel,at91rm9200-usart
  22       - items:
  23           - const: atmel,at91sam9260-dbgu
  24           - const: atmel,at91sam9260-usart
  25       - items:
  26           - const: microchip,sam9x60-usart
  27           - const: atmel,at91sam9260-usart
  28       - items:
  29           - const: microchip,sam9x60-dbgu
  30           - const: microchip,sam9x60-usart
  31           - const: atmel,at91sam9260-dbgu
  32           - const: atmel,at91sam9260-usart
  33
  34   reg:
  35     maxItems: 1
  36
  37   interrupts:
  38     maxItems: 1
  39
  40   clock-names:
  41     minItems: 1
  42     items:
  43       - const: usart
  44       - const: gclk
  45
  46   clocks:
  47     minItems: 1
  48     items:
  49       - description: USART Peripheral Clock
  50       - description: USART Generic Clock
  51
  52   dmas:
  53     items:
  54       - description: TX DMA Channel
  55       - description: RX DMA Channel
  56
  57   dma-names:
  58     items:
  59       - const: tx
  60       - const: rx
  61
  62   atmel,usart-mode:
  63     $ref: /schemas/types.yaml#/definitions/uint32
  64     description:
  65       Must be either <AT91_USART_MODE_SPI> for SPI or
  66       <AT91_USART_MODE_SERIAL> for USART (found in dt-bindings/mfd/at91-usart.h).
  67     enum: [ 0, 1 ]
  68
  69   atmel,use-dma-rx:
  70     type: boolean
  71     description: use of PDC or DMA for receiving data
  72
  73   atmel,use-dma-tx:
  74     type: boolean
  75     description: use of PDC or DMA for transmitting data
  76
  77   atmel,fifo-size:
  78     $ref: /schemas/types.yaml#/definitions/uint32
  79     description:
  80       Maximum number of data the RX and TX FIFOs can store for FIFO
  81       capable USARTS.
  82     enum: [ 16, 32 ]
  83
  84 required:
  85   - compatible
  86   - reg
  87   - interrupts
  88   - clock-names
  89   - clocks
  90   - atmel,usart-mode
  91
  92 allOf:
  93   - if:
  94       properties:
  95         atmel,usart-mode:
  96           const: 1
  97     then:
  98       allOf:
  99         - $ref: /schemas/spi/spi-controller.yaml#
 100
 101       properties:
 102         atmel,use-dma-rx: false
 103
 104         atmel,use-dma-tx: false
 105
 106         atmel,fifo-size: false
 107
 108         "#size-cells":
 109           const: 0
 110
 111         "#address-cells":
 112           const: 1
 113
 114       required:
 115         - "#size-cells"
 116         - "#address-cells"
 117
 118     else:
 119       allOf:
 120         - $ref: /schemas/serial/serial.yaml#
 121         - $ref: /schemas/serial/rs485.yaml#
 122
 123 unevaluatedProperties: false
 124
 125 examples:
 126   - |
 127     #include <dt-bindings/gpio/gpio.h>
 128     #include <dt-bindings/interrupt-controller/irq.h>
 129     #include <dt-bindings/mfd/at91-usart.h>
 130     #include <dt-bindings/dma/at91.h>
 131
 132     /* use PDC */
 133     usart0: serial@fff8c000 {
 134         compatible = "atmel,at91sam9260-usart";
 135         reg = <0xfff8c000 0x4000>;
 136         atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 137         interrupts = <7>;
 138         clocks = <&usart0_clk>;
 139         clock-names = "usart";
 140         atmel,use-dma-rx;
 141         atmel,use-dma-tx;
 142         rts-gpios = <&pioD 15 GPIO_ACTIVE_LOW>;
 143         cts-gpios = <&pioD 16 GPIO_ACTIVE_LOW>;
 144         dtr-gpios = <&pioD 17 GPIO_ACTIVE_LOW>;
 145         dsr-gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
 146         dcd-gpios = <&pioD 20 GPIO_ACTIVE_LOW>;
 147         rng-gpios = <&pioD 19 GPIO_ACTIVE_LOW>;
 148     };
 149
 150   - |
 151     #include <dt-bindings/gpio/gpio.h>
 152     #include <dt-bindings/interrupt-controller/irq.h>
 153     #include <dt-bindings/mfd/at91-usart.h>
 154     #include <dt-bindings/dma/at91.h>
 155
 156     /* use DMA */
 157     usart1: serial@f001c000 {
 158         compatible = "atmel,at91sam9260-usart";
 159         reg = <0xf001c000 0x100>;
 160         atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 161         interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
 162         clocks = <&usart0_clk>;
 163         clock-names = "usart";
 164         atmel,use-dma-rx;
 165         atmel,use-dma-tx;
 166         dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>,
 167                <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
 168         dma-names = "tx", "rx";
 169         atmel,fifo-size = <32>;
 170     };
 171
 172   - |
 173     #include <dt-bindings/gpio/gpio.h>
 174     #include <dt-bindings/interrupt-controller/irq.h>
 175     #include <dt-bindings/mfd/at91-usart.h>
 176     #include <dt-bindings/dma/at91.h>
 177
 178     /* SPI mode */
 179     spi0: spi@f001c000 {
 180         compatible = "atmel,at91sam9260-usart";
 181         reg = <0xf001c000 0x100>;
 182         #address-cells = <1>;
 183         #size-cells = <0>;
 184         atmel,usart-mode = <AT91_USART_MODE_SPI>;
 185         interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
 186         clocks = <&usart0_clk>;
 187         clock-names = "usart";
 188         dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>,
 189                <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
 190         dma-names = "tx", "rx";
 191         cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>;
 192     };