]> git.ipfire.org Git - thirdparty/u-boot.git/blob - Bindings/sound/pcm512x.txt
Squashed 'dts/upstream/' content from commit aaba2d45dc2a
[thirdparty/u-boot.git] / Bindings / sound / pcm512x.txt
1 PCM512x and TAS575x audio CODECs/amplifiers
2
3 These devices support both I2C and SPI (configured with pin strapping
4 on the board). The TAS575x devices only support I2C.
5
6 Required properties:
7
8 - compatible : One of "ti,pcm5121", "ti,pcm5122", "ti,pcm5141",
9 "ti,pcm5142", "ti,tas5754" or "ti,tas5756"
10
11 - reg : the I2C address of the device for I2C, the chip select
12 number for SPI.
13
14 - AVDD-supply, DVDD-supply, and CPVDD-supply : power supplies for the
15 device, as covered in bindings/regulator/regulator.txt
16
17 Optional properties:
18
19 - clocks : A clock specifier for the clock connected as SCLK. If this
20 is absent the device will be configured to clock from BCLK. If pll-in
21 and pll-out are specified in addition to a clock, the device is
22 configured to accept clock input on a specified gpio pin.
23
24 - pll-in, pll-out : gpio pins used to connect the pll using <1>
25 through <6>. The device will be configured for clock input on the
26 given pll-in pin and PLL output on the given pll-out pin. An
27 external connection from the pll-out pin to the SCLK pin is assumed.
28 Caution: the TAS-desvices only support gpios 1,2 and 3
29
30 Examples:
31
32 pcm5122: pcm5122@4c {
33 compatible = "ti,pcm5122";
34 reg = <0x4c>;
35
36 AVDD-supply = <&reg_3v3_analog>;
37 DVDD-supply = <&reg_1v8>;
38 CPVDD-supply = <&reg_3v3>;
39 };
40
41
42 pcm5142: pcm5142@4c {
43 compatible = "ti,pcm5142";
44 reg = <0x4c>;
45
46 AVDD-supply = <&reg_3v3_analog>;
47 DVDD-supply = <&reg_1v8>;
48 CPVDD-supply = <&reg_3v3>;
49
50 clocks = <&sck>;
51 pll-in = <3>;
52 pll-out = <6>;
53 };