Bindings/sound/qcom,wcd934x.yaml

   1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
   2 %YAML 1.2
   3 ---
   4 $id: http://devicetree.org/schemas/sound/qcom,wcd934x.yaml#
   5 $schema: http://devicetree.org/meta-schemas/core.yaml#
   6
   7 title: Qualcomm WCD9340/WCD9341 Audio Codec
   8
   9 maintainers:
  10   - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
  11
  12 description: |
  13   Qualcomm WCD9340/WCD9341 Codec is a standalone Hi-Fi audio codec IC.
  14   It has in-built Soundwire controller, pin controller, interrupt mux and
  15   supports both I2S/I2C and SLIMbus audio interfaces.
  16
  17 properties:
  18   compatible:
  19     const: slim217,250
  20
  21   reg:
  22     maxItems: 1
  23
  24   interrupts:
  25     maxItems: 1
  26
  27   reset-gpios:
  28     description: GPIO spec for reset line to use
  29     maxItems: 1
  30
  31   slim-ifc-dev:
  32     description: IFC device interface
  33     $ref: /schemas/types.yaml#/definitions/phandle
  34
  35   clocks:
  36     maxItems: 1
  37
  38   clock-names:
  39     const: extclk
  40
  41   vdd-buck-supply:
  42     description: A reference to the 1.8V buck supply
  43
  44   vdd-buck-sido-supply:
  45     description: A reference to the 1.8V SIDO buck supply
  46
  47   vdd-rx-supply:
  48     description: A reference to the 1.8V rx supply
  49
  50   vdd-tx-supply:
  51     description: A reference to the 1.8V tx supply
  52
  53   vdd-vbat-supply:
  54     description: A reference to the vbat supply
  55
  56   vdd-io-supply:
  57     description: A reference to the 1.8V I/O supply
  58
  59   vdd-micbias-supply:
  60     description: A reference to the micbias supply
  61
  62   qcom,micbias1-microvolt:
  63     description: micbias1 voltage
  64     minimum: 1800000
  65     maximum: 2850000
  66
  67   qcom,micbias2-microvolt:
  68     description: micbias2 voltage
  69     minimum: 1800000
  70     maximum: 2850000
  71
  72   qcom,micbias3-microvolt:
  73     description: micbias3 voltage
  74     minimum: 1800000
  75     maximum: 2850000
  76
  77   qcom,micbias4-microvolt:
  78     description: micbias4 voltage
  79     minimum: 1800000
  80     maximum: 2850000
  81
  82   qcom,hphl-jack-type-normally-closed:
  83     description: Indicates that HPHL jack switch type is normally closed
  84     type: boolean
  85
  86   qcom,ground-jack-type-normally-closed:
  87     description: Indicates that Headset Ground switch type is normally closed
  88     type: boolean
  89
  90   qcom,mbhc-headset-vthreshold-microvolt:
  91     description: Voltage threshold value for headset detection
  92     minimum: 0
  93     maximum: 2850000
  94
  95   qcom,mbhc-headphone-vthreshold-microvolt:
  96     description: Voltage threshold value for headphone detection
  97     minimum: 0
  98     maximum: 2850000
  99
 100   qcom,mbhc-buttons-vthreshold-microvolt:
 101     description:
 102       Array of 8 Voltage threshold values corresponding to headset
 103       button0 - button7
 104     minItems: 8
 105     maxItems: 8
 106
 107   clock-output-names:
 108     const: mclk
 109
 110   clock-frequency:
 111     description: Clock frequency of output clk in Hz
 112
 113   interrupt-controller: true
 114
 115   '#interrupt-cells':
 116     const: 1
 117
 118   '#clock-cells':
 119     const: 0
 120
 121   '#sound-dai-cells':
 122     const: 1
 123
 124   "#address-cells":
 125     const: 1
 126
 127   "#size-cells":
 128     const: 1
 129
 130   gpio@42:
 131     type: object
 132     $ref: /schemas/gpio/qcom,wcd934x-gpio.yaml#
 133
 134 patternProperties:
 135   "^.*@[0-9a-f]+$":
 136     type: object
 137     additionalProperties: true
 138     description: |
 139       WCD934x subnode for each slave devices. Bindings of each subnodes
 140       depends on the specific driver providing the functionality and
 141       documented in their respective bindings.
 142
 143     properties:
 144       reg:
 145         maxItems: 1
 146
 147     required:
 148       - reg
 149
 150 required:
 151   - compatible
 152   - reg
 153
 154 allOf:
 155   - $ref: dai-common.yaml#
 156   - if:
 157       required:
 158         - slim-ifc-dev
 159     then:
 160       required:
 161         - reset-gpios
 162         - slim-ifc-dev
 163         - interrupt-controller
 164         - clock-frequency
 165         - clock-output-names
 166         - qcom,micbias1-microvolt
 167         - qcom,micbias2-microvolt
 168         - qcom,micbias3-microvolt
 169         - qcom,micbias4-microvolt
 170         - "#interrupt-cells"
 171         - "#clock-cells"
 172         - "#sound-dai-cells"
 173         - "#address-cells"
 174         - "#size-cells"
 175       oneOf:
 176         - required:
 177             - interrupts-extended
 178         - required:
 179             - interrupts
 180     else:
 181       properties:
 182         reset-gpios: false
 183         slim-ifc-dev: false
 184         interrupts: false
 185         interrupt-controller: false
 186         clock-frequency: false
 187         clock-output-names: false
 188         qcom,micbias1-microvolt: false
 189         qcom,micbias2-microvolt: false
 190         qcom,micbias3-microvolt: false
 191         qcom,micbias4-microvolt: false
 192         "#interrupt-cells": false
 193         "#clock-cells": false
 194         "#sound-dai-cells": false
 195         "#address-cells": false
 196         "#size-cells": false
 197
 198 additionalProperties: false
 199
 200 examples:
 201   - |
 202     codec@1,0{
 203         compatible = "slim217,250";
 204         reg = <1 0>;
 205         reset-gpios = <&tlmm 64 0>;
 206         slim-ifc-dev = <&wcd9340_ifd>;
 207         #sound-dai-cells = <1>;
 208         interrupt-parent = <&tlmm>;
 209         interrupts = <54 4>;
 210         interrupt-controller;
 211         #interrupt-cells = <1>;
 212         #clock-cells = <0>;
 213         clock-frequency = <9600000>;
 214         clock-output-names = "mclk";
 215         qcom,micbias1-microvolt = <1800000>;
 216         qcom,micbias2-microvolt = <1800000>;
 217         qcom,micbias3-microvolt = <1800000>;
 218         qcom,micbias4-microvolt = <1800000>;
 219         qcom,hphl-jack-type-normally-closed;
 220         qcom,ground-jack-type-normally-closed;
 221         qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
 222         qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
 223         qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
 224         clock-names = "extclk";
 225         clocks = <&rpmhcc 2>;
 226
 227         #address-cells = <1>;
 228         #size-cells = <1>;
 229
 230         gpio@42 {
 231             compatible = "qcom,wcd9340-gpio";
 232             reg = <0x42 0x2>;
 233             gpio-controller;
 234             #gpio-cells = <2>;
 235         };
 236     };
 237
 238 ...