Bindings/usb/dwc2.yaml

   1 # SPDX-License-Identifier: GPL-2.0
   2 %YAML 1.2
   3 ---
   4 $id: http://devicetree.org/schemas/usb/dwc2.yaml#
   5 $schema: http://devicetree.org/meta-schemas/core.yaml#
   6
   7 title: DesignWare HS OTG USB 2.0 controller
   8
   9 maintainers:
  10   - Rob Herring <robh@kernel.org>
  11
  12 allOf:
  13   - $ref: usb-drd.yaml#
  14   - $ref: usb-hcd.yaml#
  15
  16 properties:
  17   compatible:
  18     oneOf:
  19       - const: brcm,bcm2835-usb
  20       - const: hisilicon,hi6220-usb
  21       - const: ingenic,jz4775-otg
  22       - const: ingenic,jz4780-otg
  23       - const: ingenic,x1000-otg
  24       - const: ingenic,x1600-otg
  25       - const: ingenic,x1700-otg
  26       - const: ingenic,x1830-otg
  27       - const: ingenic,x2000-otg
  28       - items:
  29           - const: rockchip,rk3066-usb
  30           - const: snps,dwc2
  31       - items:
  32           - enum:
  33               - rockchip,px30-usb
  34               - rockchip,rk3036-usb
  35               - rockchip,rk3128-usb
  36               - rockchip,rk3188-usb
  37               - rockchip,rk3228-usb
  38               - rockchip,rk3288-usb
  39               - rockchip,rk3308-usb
  40               - rockchip,rk3328-usb
  41               - rockchip,rk3368-usb
  42               - rockchip,rv1108-usb
  43           - const: rockchip,rk3066-usb
  44           - const: snps,dwc2
  45       - const: lantiq,arx100-usb
  46       - const: lantiq,ase-usb
  47       - const: lantiq,danube-usb
  48       - const: lantiq,xrx200-usb
  49       - const: lantiq,xrx300-usb
  50       - items:
  51           - enum:
  52               - amlogic,meson8-usb
  53               - amlogic,meson8b-usb
  54               - amlogic,meson-gxbb-usb
  55               - amlogic,meson-g12a-usb
  56               - amlogic,meson-a1-usb
  57               - intel,socfpga-agilex-hsotg
  58           - const: snps,dwc2
  59       - const: amcc,dwc-otg
  60       - const: apm,apm82181-dwc-otg
  61       - const: snps,dwc2
  62       - const: st,stm32f4x9-fsotg
  63       - const: st,stm32f4x9-hsotg
  64       - const: st,stm32f7-hsotg
  65       - const: st,stm32mp15-fsotg
  66       - items:
  67           - const: st,stm32mp15-hsotg
  68           - const: snps,dwc2
  69       - const: samsung,s3c6400-hsotg
  70       - const: intel,socfpga-agilex-hsotg
  71
  72   reg:
  73     maxItems: 1
  74
  75   interrupts:
  76     maxItems: 1
  77
  78   clocks:
  79     minItems: 1
  80     maxItems: 2
  81
  82   clock-names:
  83     items:
  84       - const: otg
  85       - const: utmi
  86     minItems: 1
  87
  88   disable-over-current:
  89     type: boolean
  90     description: whether to disable detection of over-current condition.
  91
  92   iommus:
  93     maxItems: 1
  94
  95   resets:
  96     items:
  97       - description: common reset
  98       - description: ecc reset
  99     minItems: 1
 100
 101   reset-names:
 102     items:
 103       - const: dwc2
 104       - const: dwc2-ecc
 105     minItems: 1
 106
 107   phys:
 108     maxItems: 1
 109
 110   phy-names:
 111     const: usb2-phy
 112
 113   power-domains:
 114     maxItems: 1
 115
 116   vbus-supply:
 117     description: reference to the VBUS regulator. Depending on the current mode
 118       this is enabled (in "host" mode") or disabled (in "peripheral" mode). The
 119       regulator is updated if the controller is configured in "otg" mode and the
 120       status changes between "host" and "peripheral".
 121
 122   vusb_d-supply:
 123     description: phandle to voltage regulator of digital section,
 124
 125   vusb_a-supply:
 126     description: phandle to voltage regulator of analog section.
 127
 128   usb33d-supply:
 129     description: reference to the VBUS and ID sensing comparators supply, in
 130       order to perform OTG operation, used on STM32MP15 SoCs.
 131
 132   dr_mode: true
 133
 134   otg-rev: true
 135
 136   hnp-disable: true
 137
 138   srp-disable: true
 139
 140   usb-role-switch: true
 141
 142   role-switch-default-mode: true
 143
 144   g-rx-fifo-size:
 145     $ref: /schemas/types.yaml#/definitions/uint32
 146     description: size of rx fifo size in gadget mode.
 147
 148   g-np-tx-fifo-size:
 149     $ref: /schemas/types.yaml#/definitions/uint32
 150     description: size of non-periodic tx fifo size in gadget mode.
 151
 152   g-tx-fifo-size:
 153     $ref: /schemas/types.yaml#/definitions/uint32-array
 154     description: size of periodic tx fifo per endpoint (except ep0) in gadget mode.
 155
 156   snps,need-phy-for-wake:
 157     $ref: /schemas/types.yaml#/definitions/flag
 158     description: If present indicates that the phy needs to be left on for
 159       remote wakeup during suspend.
 160
 161   snps,reset-phy-on-wake:
 162     $ref: /schemas/types.yaml#/definitions/flag
 163     description: If present indicates that we need to reset the PHY when we
 164       detect a wakeup. This is due to a hardware errata.
 165
 166   port:
 167     description:
 168       Any connector to the data bus of this controller should be modelled
 169       using the OF graph bindings specified, if the "usb-role-switch"
 170       property is used.
 171     $ref: /schemas/graph.yaml#/properties/port
 172
 173   tpl-support: true
 174
 175 dependencies:
 176   port: [ usb-role-switch ]
 177   role-switch-default-mode: [ usb-role-switch ]
 178
 179 required:
 180   - compatible
 181   - reg
 182   - interrupts
 183   - clocks
 184   - clock-names
 185
 186 additionalProperties: false
 187
 188 examples:
 189   - |
 190       usb@101c0000 {
 191         compatible = "rockchip,rk3066-usb", "snps,dwc2";
 192         reg = <0x10180000 0x40000>;
 193         interrupts = <18>;
 194         clocks = <&usb_otg_ahb_clk>;
 195         clock-names = "otg";
 196         phys = <&usbphy>;
 197         phy-names = "usb2-phy";
 198       };
 199
 200 ...