1 commit 7754f33c6fb7a2c050388d20bf3847038558bdcf
2 Author: Larry Johnson <lrj@acm.org>
3 Date: Thu Feb 21 13:58:11 2008 -0500
5 LM73 bug fix for negative temperatures and cleanup
7 When the LM73 temperature sensor measures a temperature below 0 C, the
8 current driver does not perform sign extension, so the result returned is
9 512 C too high. This patch fixes the problem, and does general cleanup
12 Signed-off-by: Larry Johnson <lrj@acm.org>
14 commit 96ef831f713289afba19da0c8f905e99da2b23e0
15 Author: Guennadi Liakhovetski <lg@denx.de>
16 Date: Thu Apr 3 13:36:02 2008 +0200
18 cfi_flash: Support buffered writes on non-standard Spansion NOR flash
20 Some NOR flash chip from Spansion, for example, the s29ws-n MirrorBit
21 series require different addresses for buffered write commands. Define a
22 configuration option to support buffered writes on those chips. A more
23 elegant solution would be to automatically detect those chips by parsing
24 their CFI records, but that would require introduction of a fixup table
25 into the cfi_flash driver.
27 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
29 commit 3f9c542d3d69b1a10a5e193e779133a0454d1f44
30 Author: Lee Nipper <lee.nipper@freescale.com>
31 Date: Thu Apr 10 09:35:06 2008 -0500
33 mpc83xx: Update DIMM data bus width test to support 40-bit width
35 32-bit wide ECC memory modules report 40-bit width.
36 Changed the DIMM data bus width test to 'less than 64' instead of 'equal 32'.
38 Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
39 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
41 commit 5fb5a689d822ca61e814bd523fc930af335242fa
42 Author: Dave Liu <r63238@freescale.com>
43 Date: Mon Mar 31 17:05:12 2008 +0800
45 mpc83xx: Fix the bug of serdes initialization
47 Currently the serdes will not be initializated due to the
50 Signed-off-by: Dave Liu <daveliu@freescale.com>
51 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
53 commit 2000784818f043db7ca60e2846a72d097766b894
54 Author: Dave Liu <r63238@freescale.com>
55 Date: Thu Apr 3 16:28:29 2008 +0800
57 mpc83xx: Fix the SATA clock setting of 837x targets
59 Currently the SATA controller clock is configured as CSB clock,
60 usually the CSB clock is 400/333/266MHz.
62 However, The SATA IP block is only guaranteed to operate up to
63 200 MHz as stated in the HW spec.
65 The bug is reported by Joe D'Abbraccio <ljd015@freescale.com>
67 This patch makes the SATA clock as half of CSB clock.
69 Signed-off-by: Dave Liu <daveliu@freescale.com>
70 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
72 commit 1ac4f320bf0b593aa0a741f2d649a8ece8838672
73 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
74 Date: Wed Apr 2 13:41:21 2008 +0200
76 mpc837xerdb: Fix warning: implicit declaration of function 'fdt_fixup_dr_usb'
78 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
79 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
81 commit 97b3ecb575a92fa34c1765229dbc06f2b662f139
82 Author: Kumar Gala <galak@kernel.crashing.org>
83 Date: Wed Apr 9 04:20:57 2008 -0500
85 85xx: Fix detection of MP cpu spin up
87 We were looking at the wrong memory offset to determine of a secondary
88 cpu had been spun up or not. Also added a warning message if the
89 all the secondary cpus we expect don't spin up.
91 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
93 commit f3e04bdc3f360c66801a9048956e61e41a16edba
94 Author: Kumar Gala <galak@kernel.crashing.org>
95 Date: Tue Apr 8 10:45:50 2008 -0500
97 85xx: Use SVR_SOC_VER instead of SVR_VER
99 The recent change introduced by 'Update SVR numbers to expand support'
100 now requires that we use SVR_SOC_VER instead of SVR_VER if we want
101 to compare against a particular processor id.
103 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
105 commit 5b2052e5f5fcce5dbd4d2750a29c0e45bce806e7
106 Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
107 Date: Fri Apr 11 10:00:35 2008 -0400
109 ppc4xx: Fix power mgt definitions for PPC440
111 Corrected DCR addresses of PPC440EP power management registers.
113 Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
115 commit 950a392464e616b4590bc4501be46e2d7d162dea
116 Author: Wolfgang Denk <wd@denx.de>
117 Date: Fri Apr 11 15:11:26 2008 +0200
119 Revert merge of git://www.denx.de/git/u-boot-arm, commit 62479b18:
121 Reverting became necessary after it turned out that the patches in
122 the u-boot-arm repo were modified, and in some cases corrupted.
124 This reverts the following commits:
126 066bebd6353e33af3adefc3404560871699e9961
127 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6
128 c88ae20580b2b01487b4cdcc8b2a113f551aee36
129 a147e56f03871bba4f05058d5e04ce7deb010b04
130 d6674e0e2a6a1f033945f78838566210d3f28c95
131 8c8463cce44d849e37744749b32d38e1dfb12e50
132 c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d
133 8bf69d81782619187933a605f1a95ee1d069478d
134 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d
135 a574a73852a527779234e73e17e7597fd8128882
136 1377b5583a48021d983e1fd565f7d40c89e84d63
137 1704dc20917b4f71e373e2c888497ee666d40380
139 Signed-off-by: Wolfgang Denk <wd@denx.de>
141 commit 64e541f4c1b413dd84c7e409f5c2bf328db2ac13
142 Author: Stefan Roese <sr@denx.de>
143 Date: Fri Apr 11 07:02:29 2008 +0200
145 ppc4xx: Update Kilauea defconfig to use device-tree booting as default
147 This patch reworks the default environment on Kilauea/Haleakala. Now
148 "net_nfs" for exmaple uses the device-tree style booting formerly know
149 as "net_nfs_fdt". Also the addresses in RAM were changed because of the
150 new image booting support, which check for image overwriting. So the
151 addresses needed togeet adjusted.
153 Signed-off-by: Stefan Roese <sr@denx.de>
155 commit 756f5dacda3810b094b94bcceffd3ce6c7ff9a28
156 Author: Stefan Roese <sr@denx.de>
157 Date: Wed Apr 9 11:58:02 2008 +0200
159 ppc4xx: Fix Canyonlands default environment to work with new image support
161 Since the new image support checks for image overwriting, the default
162 environment needs to get adjusted to use correct addresses.
164 Signed-off-by: Stefan Roese <sr@denx.de>
166 commit dfc6c7b647dba7ab86749616f0e9e5740deed422
167 Author: Stefan Roese <sr@denx.de>
168 Date: Wed Apr 9 11:54:11 2008 +0200
170 ppc: Revert patch 70431e8a that used _start instead of CFG_MONITOR_BASE
172 The patch 70431e8a7393b6b793f77957f95b999fc9a269b8 (Make MPC83xx one step
173 closer to full relocation.) doesn't use CFG_MONITOR_BASE anymore. But
174 on 4xx systems _start currently cannot be used for this calculation.
175 So revert back to the original version for now.
177 Signed-off-by: Stefan Roese <sr@denx.de>
179 commit f91374f65eae8b42cac329e06ba1c54728278efb
180 Author: Michal Simek <monstr@monstr.eu>
181 Date: Fri Mar 28 12:49:52 2008 +0100
183 microblaze: Sort microblaze boards in MAKEALL script
185 commit 62032deb7214c6d9b4396297e2aaa559bc2f8495
186 Author: Michal Simek <monstr@monstr.eu>
187 Date: Fri Mar 28 11:58:45 2008 +0100
189 microblaze: clean microblaze_config.mk
191 FLAGS are generated by U-BOOT generator.
192 Board specific FLAGS are in board directory
194 Signed-off-by: Michal Simek <monstr@monstr.eu>
196 commit cf5c679ca04a6b54bf53a55b8b9c29335b387287
197 Author: Michal Simek <monstr@monstr.eu>
198 Date: Fri Mar 28 12:47:19 2008 +0100
200 microblaze: xupv2p fix config file for supporting FDT
202 commit 188dc16b189143573b1ed90e584bf866d75cdd12
203 Author: Michal Simek <monstr@monstr.eu>
204 Date: Fri Mar 28 11:53:02 2008 +0100
206 microblaze: ml401 fix config file for supporting FDT
208 Signed-off-by: Michal Simek <monstr@monstr.eu>
210 commit 4c6a6f02e239236261333759997eeaf86b30b54c
211 Author: Michal Simek <monstr@monstr.eu>
212 Date: Fri Mar 28 11:22:48 2008 +0100
214 microblaze: ml401 - add ifdef for GPIO
216 Signed-off-by: Michal Simek <monstr@monstr.eu>
218 commit af7ae1a411c67ee9d17a66d17ce50b374f3dd4e7
219 Author: Michal Simek <monstr@monstr.eu>
220 Date: Fri Mar 28 12:13:03 2008 +0100
222 microblaze: clean uart16550 and uartlite handling
224 Signed-off-by: Michal Simek <monstr@monstr.eu>
226 commit 0b20f250877441460fb79d72192954abe8498834
227 Author: Michal Simek <monstr@monstr.eu>
228 Date: Fri Mar 28 11:08:31 2008 +0100
230 microblaze: Add Emaclite driver to Makefile
232 Signed-off-by: Michal Simek <monstr@monstr.eu>
234 commit 868cde5310f88234b774878e4f06e79df10a88b3
235 Author: Michal Simek <monstr@monstr.eu>
236 Date: Fri Mar 28 11:08:01 2008 +0100
238 microblaze: Add Emac driver to Makefile
240 Signed-off-by: Michal Simek <monstr@monstr.eu>
242 commit 6f961b4f461f6cbb83a467d468a02e6078c2b327
243 Author: Michal Simek <monstr@monstr.eu>
244 Date: Fri Mar 28 12:42:29 2008 +0100
246 microblaze: add Emac ethernet driver
248 commit 89c53891b18cbafd29ab8931b40e27ad231b6085
249 Author: Michal Simek <monstr@monstr.eu>
250 Date: Fri Mar 28 12:41:56 2008 +0100
252 microblaze: add Emaclite ethernet driver
254 commit e5845e21224dbe2fe47b11f1cdf95de7f84be7cb
255 Author: Michal Simek <monstr@monstr.eu>
256 Date: Fri Mar 28 11:04:01 2008 +0100
258 microblaze: ML401 and XUPV2P remove emac and emaclite reference
260 Signed-off-by: Michal Simek <monstr@monstr.eu>
262 commit 6bf3e982aefdb1daf9f5462d482c8f9d1cc90a57
263 Author: Michal Simek <monstr@monstr.eu>
264 Date: Fri Mar 28 10:59:32 2008 +0100
266 microblaze: remove old setting for emac driver
268 Signed-off-by: Michal Simek <monstr@monstr.eu>
270 commit cd2b75efb9cc037c74ecee9b3586f9bf9e1d4e57
271 Author: Michal Simek <monstr@monstr.eu>
272 Date: Fri Mar 28 10:58:15 2008 +0100
274 microblaze: Clean Makefile from ancient emac driver
276 Signed-off-by: Michal Simek <monstr@monstr.eu>
278 commit ab68f921d9c741830f721c3d879c13a0c5597183
279 Author: Daniel Hellstrom <daniel@gaisler.com>
280 Date: Fri Mar 28 10:20:43 2008 +0100
282 SPARC/LEON2: added support for Gaisler simulator GRSIM/TSIM for SPARC/LEON2 targets. See www.gaisler.com for information.
284 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
286 commit 6ed8a43a19bb0275501bc286007daafa923552cf
287 Author: Daniel Hellstrom <daniel@gaisler.com>
288 Date: Wed Mar 26 23:38:48 2008 +0100
290 SPARC/LEON3: added support for GR-CPCI-AX2000 FPGA AX board. The FPGA is exchangeable but a standard LEON3 design is assumed. See www.gaisler.com for information.
292 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
294 commit 6940383d9ec1bfe2f13e339e6f723e8d34af2b12
295 Author: Daniel Hellstrom <daniel@gaisler.com>
296 Date: Wed Mar 26 23:34:47 2008 +0100
298 SPARC/LEON3: added support for Altera NIOS Development kit (STRATIX II Edition) with GRLIB template design. See www.gaisler.com for information.
300 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
302 commit 823edd8a66ed50af5aaba0c79567f67061e4d79a
303 Author: Daniel Hellstrom <daniel@gaisler.com>
304 Date: Fri Mar 28 10:06:52 2008 +0100
306 SPARC/LEON3: added support for Gaisler GRSIM/TSIM2 SPARC/LEON3 simulatorn. See www.gaisler.com for information.
308 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
310 commit 71d7e4c0489e5ed8fc69382236aaa2a1e510c135
311 Author: Daniel Hellstrom <daniel@gaisler.com>
312 Date: Wed Mar 26 23:26:48 2008 +0100
314 SPARC/LEON3: added support for GR-XC3S-1500 board with GRLIB template design. See www.gaisler.com for board information.
316 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
318 commit b330990c2f36ee4a8bb318360e1c8ba965269ab6
319 Author: Daniel Hellstrom <daniel@gaisler.com>
320 Date: Fri Mar 28 10:00:33 2008 +0100
322 SPARC: Added support for SPARC LEON2 SOC Processor.
324 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
326 commit 2a2fa797e63b1e3cd4d570318ca5fbf8723ef53a
327 Author: Daniel Hellstrom <daniel@gaisler.com>
328 Date: Wed Mar 26 23:00:38 2008 +0100
330 SPARC/LEON3: Added AMBA Bus Plug&Play information print command (ambapp). It can print available cores (type: AHB Master, AHB Slave, APB Slave), their address ranges, IRQ number and version.
332 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
334 commit 1e9a164e22976933002c5e4b0b79b09fcede9cd4
335 Author: Daniel Hellstrom <daniel@gaisler.com>
336 Date: Wed Mar 26 22:51:29 2008 +0100
338 SPARC: Added support for SPARC LEON3 SOC processor.
340 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
342 commit bf3d8b31169546fcddb4737391e1893fb12d033a
343 Author: Daniel Hellstrom <daniel@gaisler.com>
344 Date: Fri Mar 28 08:29:26 2008 +0100
346 SPARC: added SPARC support for new uimage in common code.
348 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
350 commit 00ab32c85405a4fe65fd4128243086210fc90a21
351 Author: Daniel Hellstrom <daniel@gaisler.com>
352 Date: Wed Mar 26 22:36:03 2008 +0100
354 SPARC: added SPARC board information to the command bdinfo.
356 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
358 commit c2f02da21a3f37f0878554eebc785e04fdc4e128
359 Author: Daniel Hellstrom <daniel@gaisler.com>
360 Date: Fri Mar 28 09:47:00 2008 +0100
362 SPARC: Added generic support for SPARC architecture.
364 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
366 commit e54ec0f016803e4d9524ff71f7971bda0c51b287
367 Author: Stefan Roese <sr@denx.de>
368 Date: Thu Apr 3 14:50:34 2008 +0200
370 ppc4xx: Fix 4xx enet driver to support 460GT EMAC2+3
372 This patch fixes a problem with the RGMII setup of the 460GT. The 460GT
373 has 2 RGMII instances and we need to configure the 2nd RGMII instance
374 for the EMAC2+3 channels.
376 Signed-off-by: Stefan Roese <sr@denx.de>
378 commit c2a545ce33b26d80337f80b533828839249fb1c9
379 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
380 Date: Wed Apr 2 08:03:56 2008 +0200
382 MPC8xx: Fix libfdt support introduced in commit 77ff7b74
384 fdt.c: In function 'ft_cpu_setup':
385 fdt.c:33: warning: implicit declaration of function 'do_fixup_by_prop_u32'
386 fdt.c:39: warning: implicit declaration of function 'do_fixup_by_compat_u32'
387 fdt.c:43: warning: implicit declaration of function 'fdt_fixup_ethernet'
388 fdt.c:45: warning: implicit declaration of function 'fdt_fixup_memory'
390 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
392 commit 4abd844d8eb108736e1cf8fbf3dbf61f2d5fc11b
393 Author: Andy Fleming <afleming@freescale.com>
394 Date: Mon Mar 31 20:45:56 2008 -0500
396 Fix fdt set command to conform to dts spec
398 The fdt set command was treating properties specified as <00> and <0011>
399 as byte streams, rather than as an array of cells. As we already have
400 syntax for expressing the desire for a stream of bytes ([ xx xx ...]),
401 we should use the <> syntax to describe arrays of cells, which are always
402 32-bits per element. If we imagine this likely (IMHO) scenario:
404 > fdt set /ethernet-phy@1 reg <1>
406 With the old code, this would create a bad fdt, since the reg cell would be
407 made to be one byte in length. But the cell must be 4 bytes, so this would
410 Also, the dts spec calls for constants inside the angle brackets (<>)
411 to conform to C constant standards as they pertain to base.
414 > fdt set /ethernet@f00 reg <0xe250000\ 0x1000>
416 The old fdt command would complain that it couldn't parse that. Or, if you
417 wanted to specify that a certain clock ran at 33 MHz, you'd be required to
420 > fdt set /mydev clock <1f78a40>
422 Whereas the new code will accept decimal numbers.
424 While I was in there, I extended the fdt command parser to handle property
425 strings which are split across multiple arguments:
427 > fdt set /ethernet@f00 interrupts < 33 2 34 2 36 2 >
428 > fdt p /ethernet@f00
430 interrupts = <0x21 0x2 0x22 0x2 0x24 0x2>;
433 Lastly, the fdt print code was rearranged slightly to print arrays of cells
434 if the length of the property is a multiple of 4 bytes, and to not print
437 Signed-off-by: Andy Fleming <afleming@freescale.com>
439 commit 1c2926abdd7db89296a8cc7f224dd9d5d4e37a56
440 Author: Stefan Roese <sr@denx.de>
441 Date: Wed Apr 2 08:39:33 2008 +0200
443 ppc4xx: Canyonlands: Init SATA/PCIe port correctly
445 Canyonlands (460EX) shares the first PCIe interface with the SoC SATA
446 interface. This usage can be configured with the jumper J6. This patch
447 correctly configures the SATA/PCIe PHY for SATA usage when this jumper
450 Signed-off-by: Stefan Roese <sr@denx.de>
452 commit 6fe2946f198481254a6ee9600d7456b8316a4083
453 Author: Kim Phillips <kim.phillips@freescale.com>
454 Date: Fri Mar 28 17:37:49 2008 -0500
456 remove remaining CONFIG_OF_HAS_{UBOOT_ENV,BD_T} code
458 finish off what commit 43ddd9c820fec44816188f53346b464e20b3142d,
459 "Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T"
462 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
464 commit b5873f1732b92a25690e1513b90dfb0d644f6697
465 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
466 Date: Tue Apr 1 07:30:51 2008 +0200
468 dataflash: Move CONFIG_HAS_DATAFLASH to Makefile
470 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
472 commit 2d934ea51f276522b532f870a820e844ff480b5b
473 Author: Tor Krill <tor@excito.com>
474 Date: Fri Mar 28 15:29:45 2008 +0100
476 Add Vitesse 8601 support to TSEC driver
478 Add phy_info for Vitesse VSC8601.
479 Add config option, CFG_VSC8601_SKEWFIX, to enable RGMII skew timing compensation.
481 Signed-off-by: Tor Krill <tor@excito.com>
482 Reviewed-by: Kim Phillips <kim.phillips@freescale.com>
483 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
485 commit 3eac6402a508b0f68a21cc9cbc2cc49347de0c31
486 Author: Daniel Hellstrom <daniel@gaisler.com>
487 Date: Mon Mar 31 14:25:00 2008 +0000
489 SPARC: added SMC91111 driver in and out macros for LEON processors.
491 This patch makes SPARC/LEON processors able to read and write
492 to the SMC91111 chip using the chip external I/O bus of the memory
493 controller. This patchs defines the standard in and out macros
494 expected by the SMC9111 driver.
496 To access that I/O bus one must set up the memory controller
497 (MCTRL or FTMCTRL) correctly. It is assumed that the user sets
498 up this correctly when the other MCTRL parameters are set up. It
499 can be set up from the board configuration header file.
501 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
502 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
504 commit 3ca7c558eba36332556bc470d45e2f5d42bd0ca6
505 Author: Stelian Pop <stelian@popies.net>
506 Date: Wed Mar 26 18:52:34 2008 +0100
508 Add maintainership information for AT91CAP9ADK and AT91SAM9260EK boards
510 Signed-off-by: Stelian Pop <stelian@popies.net>
512 commit 4e03dde84dd2c91e327cdc23ae119d432559a7a3
513 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
514 Date: Mon Mar 31 21:31:04 2008 +0200
516 AT91SAM9260EK: Move CONFIG_CMD_NAND to Makefile
518 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
520 commit 0176d43e759a6e00cacc85eff26fd60f74b4f6b7
521 Author: Stelian Pop <stelian@popies.net>
522 Date: Wed Mar 26 18:52:33 2008 +0100
524 Add support for AT91SAM9260EK
526 Support for booting from internal DataFlash, external DataFlash card
527 or NAND flash is available.
529 Signed-off-by: Stelian Pop <stelian@popies.net>
531 commit 1762f13b4aab88b685b1722f17dada247945624b
532 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
533 Date: Mon Mar 31 21:20:49 2008 +0200
535 AT91SAM9: Move CONFIG_HAS_DATAFLASH to Makefile
537 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
539 commit 761712188b353494defb2b644491ff73d0daaa6f
540 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
541 Date: Mon Mar 31 21:12:17 2008 +0200
543 AT91CAP9ADK: Move CONFIG_CMD_NAND to Makefile
545 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
547 commit 983c1db04c1dd0f92e02f06d29f0c65a3d9a2687
548 Author: Stelian Pop <stelian@popies.net>
549 Date: Wed Mar 26 20:52:32 2008 +0100
551 Port AT91CAP9 to the new headers
553 Adapt the existing AT91CAP9 code to the new headers and APIs.
555 Signed-off-by: Stelian Pop <stelian@popies.net>
557 commit 177e8a5ac81bbc531a1d54abdb47f2860266c3aa
558 Author: Stelian Pop <stelian@popies.net>
559 Date: Wed Mar 26 19:52:31 2008 +0100
561 Finish header files reworking
563 Replace AT91CAP9.h file with several splitted header files coming
564 from the Linux kernel.
566 This is part 2 of the replacement: more header imports and edits.
568 Signed-off-by: Stelian Pop <stelian@popies.net>
570 commit 6d1dbbbf9fdf727384002e553e615c15d8b967f4
571 Author: Stelian Pop <stelian@popies.net>
572 Date: Wed Mar 26 19:52:30 2008 +0100
574 Import several header files from Linux
576 Replace AT91CAP9.h file with several splitted header files coming
577 from the Linux kernel.
579 This is part 1 of the replacement: pristine header files import.
581 Signed-off-by: Stelian Pop <stelian@popies.net>
583 commit a8a78f2d99dc1bd30dc3595da118539b506c6118
584 Author: Stelian Pop <stelian@popies.net>
585 Date: Wed Mar 26 20:52:28 2008 +0100
587 Move at91cap9 specific files to at91sam9 directory
589 AT91CAP9 and AT91SAM9 SoCs are very close hardware wise, so a
590 common infrastructure can be used. Let this infrastructure be
591 named after the AT91SAM9 family, and move the existing AT91CAP9
592 files to the new place.
594 Signed-off-by: Stelian Pop <stelian@popies.net>
596 commit 61106a565870ff503f92b251b94bd7afef889a04
597 Author: Stelian Pop <stelian@popies.net>
598 Date: Wed Mar 26 21:52:27 2008 +0100
600 Use timer_init() instead of board supplied interrupt_init()
602 The timer on AT91CAP9/AT91SAM9 is supplied by the SoC, and not by
603 the board, so use timer_init() instead of interrupt_init().
605 Signed-off-by: Stelian Pop <stelian@popies.net>
607 commit 5604e2178c5218fbfdba2e4293ca7652e829ac25
608 Author: Stelian Pop <stelian@popies.net>
609 Date: Wed Mar 26 21:52:36 2008 +0100
611 Cleanup DataFlash partition handling
613 DataFlash partition information has become a mess. This patch
614 defines a single partition scheme for Atmel DataFlashes. This partition
615 scheme will be used by all AT91CAP9 and AT91SAM9 boards.
617 Signed-off-by: Stelian Pop <stelian@popies.net>
619 commit 9b46432fc65ce0f0826b32e4f15c15b33ccb8d42
620 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
621 Date: Fri Mar 28 08:47:45 2008 -0500
623 ColdFire: Fix alignment issue after CONFIG_IDENT_STRING in start.S
625 When the version_string function in start.S is not 4-byte align,
626 it will cause the compiler generates "unaligned opcodes detected
627 in executable segment". This issue affects all ColdFire CPUs.
628 By adding .align 4 after CONFIG_IDENT_STRING, it will pad 0's if
631 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
632 Acked-by: John Rigby <jrigby@freescale.com>
634 commit bae61eefe15b4d454060a7140e49ae58322be803
635 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
636 Date: Tue Mar 25 15:41:15 2008 -0500
638 ColdFire: Add dspi and serial flash support for MCF5445x
640 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
641 Acked-by: John Rigby <jrigby@freescale.com>
643 commit 48ead7a7a922fceaf494e352abfab8216a41b417
644 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
645 Date: Tue Mar 18 17:37:01 2008 -0500
647 ColdFire: Remove R5200 board
649 This board never went into production
651 Signed-off-by: Zachary P. Landau <zachary.landau@labxtechnologies.com>
652 Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
653 Acked-by: John Rigby <jrigby@freescale.com>
655 commit 545c8e0a7cd3ca9d3846668f69b0d201250abea8
656 Author: Matthew Fettke <[matthew.fettke@gmail.com]>
657 Date: Thu Jan 24 14:02:32 2008 -0600
659 ColdFire: Added M5275EVB support.
661 Signed-off-by: Matthew Fettke <mfettke@videon-central.com>
662 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
663 Acked-by: John Rigby <jrigby@freescale.com>
665 commit f71d9d91a2cd9c30b2b6369f15c1a46c11537c2b
666 Author: Matthew Fettke <[matthew.fettke@gmail.com]>
667 Date: Mon Feb 4 15:38:20 2008 -0600
669 ColdFire: Added MCF5275 cpu support.
671 Signed-off-by: Matthew Fettke <mfettke@videon-central.com>
672 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
673 Acked-by: John Rigby <jrigby@freescale.com>
675 commit 44e5b9edab077aba6e9b849afa4b7fbd8fd7b02b
676 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
677 Date: Mon Mar 17 12:14:11 2008 -0500
679 ColdFire: Define bootdelay in configuration file for M52277EVB
681 Signed-off-by: Matt Wadel <Matt.Waddel@freescale.com>
682 Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
683 Acked-by: John Rigby <jrigby@freescale.com>
685 commit 77878f16cedee17161ff2336990970fffc6cea35
686 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
687 Date: Mon Mar 17 12:09:07 2008 -0500
689 ColdFire: Fix second memory Chipselect for M5475EVB
691 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
692 Acked-by: John Rigby <jrigby@freescale.com>
694 commit 43d60642395a550956cb21d287c8cfa563913d28
695 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
696 Date: Thu Mar 13 14:26:32 2008 -0500
698 ColdFire: Update correct FLASHBAR and RAMBAR1 for MCF5282
700 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
701 Acked-by: John Rigby <jrigby@freescale.com>
703 commit eb14ebe813a0cb5d47905228da446a5ad692473b
704 Author: Larry Johnson <lrj@acm.org>
705 Date: Sun Mar 30 20:33:04 2008 -0500
707 ppc4xx: Add CFG_MEM_TOP_HIDE to Denali SPD-based SDRAM setup
709 Signed-off-by: Larry Johnson <lrj@acm.org>
711 commit 02e3892021112f21067d9ed1d04ae4182725ba52
712 Author: Stefan Roese <sr@denx.de>
713 Date: Mon Mar 31 12:20:48 2008 +0200
715 ppc4xx: Small whitespace fix of esd patches
717 Signed-off-by: Stefan Roese <sr@denx.de>
719 commit 034394abb524785047c815f00dde8cdbdc1593c5
720 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
721 Date: Sun Mar 30 18:52:44 2008 +0200
723 ppc4xx: Cleanup PMC440 board support
725 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
727 commit a6cc6c37188d85c25d167a4515da86f48d9a583e
728 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
729 Date: Sun Mar 30 18:52:06 2008 +0200
731 ppc4xx: Add ptm configuration variables for PMC440
733 Add support for the ptm1la, ptm1ms, ptm2la and ptm2ms
734 environment variables.
736 Cleanup pci_target_init.
738 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
740 commit 7c91f51a2fe296909147f1646a1412729dd10b1d
741 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
742 Date: Sun Mar 30 18:01:15 2008 +0200
744 ppc4xx: Minor updates for DU440 boards
746 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
748 commit d5bffeb868d6b4d462f558dac43011027b6644b7
749 Author: Mike Frysinger <vapier@gentoo.org>
750 Date: Tue Feb 19 00:54:20 2008 -0500
752 Blackfin: cleanup and overhaul common board init functions
754 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
756 commit b86b3416f874358acaf07519e7620cdb2145f75b
757 Author: Mike Frysinger <vapier@gentoo.org>
758 Date: Tue Feb 19 00:50:58 2008 -0500
760 Blackfin: cleanup lib_blackfin/cache.c
762 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
764 commit 9171fc81722c20fdb5a829a58b17c9eaadd5fb44
765 Author: Mike Frysinger <vapier@gentoo.org>
766 Date: Sun Mar 30 15:46:13 2008 -0400
768 Blackfin: unify cpu and boot modes
770 All of the duplicated code for Blackfin processors and boot modes have been
771 unified. After all, the core is the same for all processors, just the
772 peripheral set differs (which gets handled in the drivers).
774 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
776 commit 880cc4381ea8360248cddcdf87a64566745a5724
777 Author: Stelian Pop <stelian@popies.net>
778 Date: Wed Mar 26 22:52:35 2008 +0100
780 Fix CFG_NO_FLASH compilation.
782 Many Atmel boards have no "real" (NOR) flash on board, and rely only
783 on DataFlash and NAND memories. This patch enables CFG_NO_FLASH to
784 be present in a board configuration file, while still enabling flash
785 commands like 'flinfo', 'protect', etc.
787 Signed-off-by: Stelian Pop <stelian@popies.net>
789 commit 9ce7e53abd039decea1af67aec81bbd5df7a2593
790 Author: Mike Frysinger <vapier@gentoo.org>
791 Date: Tue Feb 19 00:58:13 2008 -0500
793 Blackfin: BF537-stamp: cleanup spi flash driver
795 This punts the old spi flash driver for a new/generalized one until the
796 common one can be integrated.
798 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
800 commit bb8e3cf25bc0b04936c0c1a075985dd8700a244b
801 Author: Ben Warren <biggerbadderben@gmail.com>
802 Date: Sun Mar 30 11:34:34 2008 -0400
804 Fix macro typo in common/cmd_mii.c
806 This typo was introduced in commit 233a8bcd94997f3f345833a3b82e836222f2a206. I
807 actually applied the wrong patch.
809 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
811 commit f1b985f2d724ccaa4d3def07917f0caaf18fa77d
812 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
813 Date: Sun Mar 30 16:39:53 2008 +0200
815 use correct at91rm9200 register name in m501sk board
817 This fixes a naming bug for at91rm9200 lowlevel init code:
818 NOR boot flash is on chipselect 0, not chipselect 2. This
819 makes code use the register name from chip datasheets.
821 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
823 commit 480ed1dea103a1c8f4591afc77d2de3c7868d983
824 Author: David Brownell <david-b@pacbell.net>
825 Date: Fri Jan 18 12:55:00 2008 -0800
827 use correct at91rm9200 register name
829 This fixes a naming bug for at91rm9200 lowlevel init code:
830 NOR boot flash is on chipselect 0, not chipselect 2. This
831 makes code use the register name from chip datasheets.
833 Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
835 commit a3543d6dc52b0ba9c64016687cf32d600b31a476
836 Author: David Brownell <david-b@pacbell.net>
837 Date: Fri Jan 18 12:45:45 2008 -0800
839 add missing ARM boards to MAKEALL
841 Add some missing ARM boards to MAKEALL. These build correctly,
842 unlike several of the boards already listed.
844 Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
846 commit 066bebd6353e33af3adefc3404560871699e9961
847 Author: Peter Pearse <peter.pearse@arm.com>
848 Date: Sun Mar 30 11:34:09 2008 +0100
850 Bracket READ_TIMER macro in cpu/arm1136/omap24xx/interrupts.c
851 to prevent compilation error.
853 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
855 commit 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6
856 Author: Guennadi Liakhovetski <[lg@denx.de]>
857 Date: Sun Mar 30 11:32:30 2008 +0100
859 Support for the MX31ADS evaluation board from Freescale
861 This patch adds support for the MX31ADS evaluation board from Freescale,
862 initialization code is copied from RedBoot sources, also provided by Freescale.
864 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
866 commit c88ae20580b2b01487b4cdcc8b2a113f551aee36
867 Author: Sascha Hauer <s.hauer@pengutronix.de>
868 Date: Sun Mar 30 11:32:27 2008 +0100
870 Phytec Phycore-i.MX31 support
872 This patch adds support for the Phytec Phycore-i.MX31 board
874 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
875 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
877 commit a147e56f03871bba4f05058d5e04ce7deb010b04
878 Author: Sascha Hauer <s.hauer@pengutronix.de>
879 Date: Sun Mar 30 11:32:24 2008 +0100
883 This patch adds support for the mx31 litekit board
885 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
886 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
888 commit d6674e0e2a6a1f033945f78838566210d3f28c95
889 Author: Sascha Hauer <s.hauer@pengutronix.de>
890 Date: Sun Mar 30 11:32:21 2008 +0100
892 add SMSC LAN9x1x Network driver
894 This patch adds a driver for the following smsc network controllers:
902 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
903 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
905 commit 8c8463cce44d849e37744749b32d38e1dfb12e50
906 Author: Sascha Hauer <s.hauer@pengutronix.de>
907 Date: Sun Mar 30 11:32:16 2008 +0100
909 add an i2c driver for mx31
911 This patch adds an i2c driver for Freescale i.MX processors
913 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
914 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
916 commit c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d
917 Author: Sascha Hauer <s.hauer@pengutronix.de>
918 Date: Sun Mar 30 11:30:43 2008 +0100
920 core support for Freescale mx31
922 This patch adds the core support for Freescale mx31
924 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
925 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
927 commit 8bf69d81782619187933a605f1a95ee1d069478d
928 Author: Sascha Hauer <s.hauer@pengutronix.de>
929 Date: Sun Mar 30 11:28:46 2008 +0100
931 Separate omap24xx specific code from arm1136
933 Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136 to cpu/arm1136/omap24xx.
935 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
936 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
938 commit 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d
939 Author: Peter Pearse <peter.pearse@arm.com>
940 Date: Sun Mar 30 11:23:05 2008 +0100
942 Add pmdra into MAKEALL
944 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
946 commit a574a73852a527779234e73e17e7597fd8128882
947 Author: Pieter Voorthuijsen <[pieter.voorthuijsen@Prodrive.nl]>
948 Date: Sun Mar 30 11:21:58 2008 +0100
950 Adds support for the Prodrive PMDRA board, based on a DM6441
952 Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
954 commit 1377b5583a48021d983e1fd565f7d40c89e84d63
955 Author: Pieter Voorthuijsen <[pieter.voorthuijsen@Prodrive.nl]>
956 Date: Sun Mar 30 11:11:34 2008 +0100
958 Removes all board specific code from the arch. part for DM644x (DaVinci) boards
960 Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
962 commit 1704dc20917b4f71e373e2c888497ee666d40380
963 Author: Dirk Behme <dirk.behme@gmail.com>
964 Date: Sun Mar 30 11:09:01 2008 +0100
966 - Remove *_masked() functions as noted by Wolfgang
967 - Adapt register naming to recent TI spec (sprue26, March 2007)
968 - Fix reset_timer() handling
969 - As reported by Pieter [1] the overflow fix introduced a
970 delay of factor 16 (e.g 2 seconds became 32). While the
971 overflow fix is basically okay, it missed to divide udelay by
973 [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179
974 - Remove software division of timer count value (DIV(x)
975 macro) and do it in hardware (TIM_CLK_DIV).
976 Many thanks to Troy Kisky <troy.kisky@boundarydevices.com>
977 and Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl> for
980 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
982 Acked-by: Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl>
984 commit ac3315c26e143c31680750c9c13f027efbcc887e
985 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
986 Date: Thu Mar 6 16:45:44 2008 +0100
988 new PHY @ e1000 - 2nd try
990 Add 82541ER device with latest integrated IGP2 PHY.
991 Introduced CONFIG_E1000_FALLBACK_MAC for NIC bring-up with empty eeprom.
993 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
994 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
996 commit c2b7da552293b50c9c9e46ed71267b02c2de9ea8
997 Author: Daniel Hellstrom <daniel@gaisler.com>
998 Date: Fri Mar 28 20:22:53 2008 +0100
1000 SPARC/LEON3: Added GRETH Ethernet 10/100/1000 driver.
1002 GRETH is an Ethernet 10/100 or 10/100/1000 MAC with out without
1003 a debug link (EDCL). The GRETH core is documented in GRIP.pdf
1004 available at www.gaisler.com.
1006 If the GRETH has GigaBit support (GBIT, Scatter gather, checksum
1007 offloading etc.) can be determined by a bit in the control register.
1008 The GBIT MAC is supported by operating in GRTEH 10/100 legacy mode.
1010 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
1011 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
1013 commit 233a8bcd94997f3f345833a3b82e836222f2a206
1014 Author: Tsi-Chung Liew <Tsi-Chung.Liew@freescale.com>
1015 Date: Mon Mar 17 17:08:22 2008 -0500
1017 Add CONFIG_MII_INIT in cmd_mii.c
1019 Provide common configuration in do_mii() to execute mii_init()
1020 for all cpu architectures
1022 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
1023 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
1025 commit f605479de2deb11e834f31dfdb0af107c86aced6
1026 Author: Tsi-Chung Liew <Tsi-Chung.Liew@freescale.com>
1027 Date: Mon Mar 17 17:08:16 2008 -0500
1029 ColdFire: Fix FEC transmit issue for MCF5275
1031 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
1032 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
1034 commit d9a2f416d6ac6058cd7845033ae4dc32ef1c0746
1035 Author: Aras Vaichas <arasv@magtech.com.au>
1036 Date: Wed Mar 26 09:43:57 2008 +1100
1038 DHCP request fix for Windows Server 2003
1040 Added option CONFIG_BOOTP_DHCP_REQUEST_DELAY. This provides an optional
1041 delay before sending "DHCP Request" in net/bootp.c. Required to overcome
1042 interoperability problems with Windows Server 200x DHCP server when U-Boot
1043 client responds too fast for server to handle.
1045 Signed-off-by: Aras Vaichas <arasv@magtech.com.au>
1046 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
1048 commit 97bf85d784fbed485e652eb907589ad0d5cb7262
1049 Author: Daniel Hellstrom <daniel@gaisler.com>
1050 Date: Fri Mar 28 20:40:19 2008 +0100
1052 MTD/CFI: flash_read64 is defined a weak function (for SPARC)
1054 SPARC has implemented __raw_readq, it reads 64-bit from any 32-bit address.
1055 SPARC CPUs implement flash_read64 which calls __raw_readq.
1057 For current SPARC architectures (LEON2 and LEON3) each read from the
1058 FLASH must lead to a cache miss. This is because FLASH can not be set
1059 non-cacheable since program code resides there, and alternatively disabling
1060 cache is poor from performance view, or doing a cache flush between each
1061 read is even poorer.
1063 Forcing a cache miss on a SPARC is done by a special instruction "lda" -
1064 load alternative space, the alternative space number (ASI) is processor
1065 implementation spcific and can be found by including <asm/processor.h>.
1067 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
1069 commit 70431e8a7393b6b793f77957f95b999fc9a269b8
1070 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
1071 Date: Fri Mar 28 15:41:25 2008 +0100
1073 Make MPC83xx one step closer to full relocation.
1075 Remove a few absolute references to CFG_MONITOR_BASE for ppc/mpc83xx
1076 and use GOT relative reference.
1078 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
1079 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1081 commit 5b2793a3f3de34d439232b05acc8af67a028fd35
1082 Author: Michael Barkowski <michael.barkowski@freescale.com>
1083 Date: Thu Mar 27 14:34:43 2008 -0400
1085 mpc8323erdb: fix EEPROM page size and get MAC from EEPROM
1087 This patch fixes eeprom page size so that you can now write more than
1090 It also makes the board take MAC addresses, if found, from EEPROM.
1092 User should place up to 4 addresses at offset 0x7f00, for
1093 eth{,1,2,3}addr. Any unused addresses should be zero. This group of
1094 four six-byte values should have it's CRC at the end. crc32 and
1095 eeprom commands can be used to accomplish this.
1097 If CRC fails, MAC addresses come from the environment. If CRC
1098 succeeds, the environment is overwritten at startup.
1100 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
1101 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1103 commit 8f325cff31f6e745e6540014b131b9a97f61944c
1104 Author: Michael Barkowski <michael.barkowski@freescale.com>
1105 Date: Fri Mar 28 15:15:38 2008 -0400
1107 mpc8323erdb: define CONFIG_PCI_SKIP_HOST_BRIDGE
1109 Commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2 broke the onboard USB
1110 controller on the PCI bus in Linux on the MPC8323ERDB.
1112 This fixes it by defining CONFIG_PCI_SKIP_HOST_BRIDGE in the board's
1115 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
1116 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1118 commit e5c4ade4db1e16d3e5d4a7887f34e10e516ed3a9
1119 Author: Kim Phillips <kim.phillips@freescale.com>
1120 Date: Fri Mar 28 10:19:07 2008 -0500
1122 mpc83xx: cleanup System Part and Revision ID Register (SPRIDR) code
1124 in the spirit of commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6,
1125 85xx's "Update SVR numbers to expand support", simplify SPRIDR processing
1126 and processor ID display. Add REVID_{MAJ,MIN}OR macros to make
1127 REVID dependent code simpler. Also added PARTID_NO_E and IS_E_PROCESSOR
1130 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1132 commit 81fd52c6c8fd19f0b7856b98217ce37c46c521af
1133 Author: Kim Phillips <kim.phillips@freescale.com>
1134 Date: Fri Mar 28 10:18:53 2008 -0500
1136 mpc83xx: display ddr frequency in board_add_ram_info banner
1138 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1140 commit 35cf155c5ec1ceab2849fa5b6aa3d9a3e9e6f482
1141 Author: Kim Phillips <kim.phillips@freescale.com>
1142 Date: Fri Mar 28 10:18:40 2008 -0500
1144 mpc83xx: unreinvent mem_clk
1146 delete ddr_clk and use mem_clk instead. Rename other ddr_*_clk to
1147 mem_*_clk for consistency's sake.
1149 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1151 commit 730e792926ca3fe4dd1b734a3bf44e55afa6f536
1152 Author: Kim Phillips <kim.phillips@freescale.com>
1153 Date: Fri Mar 28 14:31:23 2008 -0500
1155 mpc83xx: enable the SATA interface on mpc8315 rdb and mpc837x rdb boards
1157 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1159 commit 2eeb3e4fc54ef2f5d574dafd42c6ce93afa30393
1160 Author: Dave Liu <r63238@freescale.com>
1161 Date: Wed Mar 26 22:57:19 2008 +0800
1163 mpc83xx: enable the SATA interface on mpc837xemds board
1165 Enable the first two SATA interfaces on MPC837xEMDS board,
1166 The two SATA ports are on LYNX1. (SATA0/1 on J4/5)
1168 Signed-off-by: Dave Liu <daveliu@freescale.com>
1169 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1171 commit 6f8c85e8d1865730c158d9ef5a06c70c3a10600a
1172 Author: Dave Liu <r63238@freescale.com>
1173 Date: Wed Mar 26 22:56:36 2008 +0800
1175 mpc83xx: initialize serdes for MPC837xEMDS boards
1177 This patch is stolen from Anton Vorontsov's patch
1178 for mpc837xerdb boards.
1180 The reference clk and xcorevdd voltage of serdes1/2
1181 is same between mpc837xemds and mpc837xerdb.
1183 8377E: LYNX1- 2 SATA LYNX2- 2 PCIE
1184 8378E: LYNX1- 2 SGMII LYNX2- 2 PCIE
1185 8379E: LYNX1- 2 SATA LYNX2- 2 SATA
1187 Signed-off-by: Dave Liu <daveliu@freescale.com>
1188 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1190 commit cc8e839abc80887ae832767b5930d40edd6d7eb7
1191 Author: Stefan Roese <sr@denx.de>
1192 Date: Fri Mar 28 14:09:04 2008 +0100
1194 ppc4xx: Canyonlands: Print SATA/PCIe configuration and board revision
1196 Canyonlands (460EX) shares the first PCIe interface with the SoC SATA
1197 interface. This usage can be configured with the jumper J6. This patch
1198 displays the current configuration upon bootup and changes the PCIe
1199 init loop, to only initialize the availabel PCIe slots.
1201 Signed-off-by: Stefan Roese <sr@denx.de>
1203 commit 90447ecbbac8572457b6d8903073ac3f120995ba
1204 Author: Tor Krill <tor@excito.com>
1205 Date: Fri Mar 28 11:29:10 2008 +0100
1207 MTD/CFI: Add support for 16bit legacy AMD flash
1209 Add entry for 512Kx16 AMD flash to jedec_table.
1210 Read out 16bit device id if chipwidth is 16bit.
1211 Fixed coding style after Stefans feedback
1213 Signed-off-by: Tor Krill <tor@excito.com>
1215 commit 5e12e75d17c4b15a310a45cd78fe71b7698a8a8e
1216 Author: Stefan Roese <sr@denx.de>
1217 Date: Fri Mar 28 11:02:53 2008 +0100
1219 ppc: Small change to CFG_MEM_TOP_HIDE description
1221 Signed-off-by: Stefan Roese <sr@denx.de>
1223 commit 280df59a8d62c6e74c281b1cb7e2052df4d6cb00
1224 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
1225 Date: Thu Mar 27 15:44:12 2008 +0900
1227 sh: Add support stat structure and stat.h
1229 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
1231 commit 4be9eb789e72b845d6693cc36b70a0b3529b3f09
1232 Author: Mark Jonas <toertel@gmail.com>
1233 Date: Sat Mar 22 19:27:52 2008 +0100
1235 sh: Removed warning when compiling drivers/serial/serial_sh.c.
1237 Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
1238 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
1240 commit f309fa38929ffba71230c02330ffa42f4bba6333
1241 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
1242 Date: Wed Mar 12 18:02:57 2008 +0900
1244 sh: Remove disable_ctrlc function from R7780MP
1246 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
1248 commit 6f4b266ff2a4fcc2bff985d6a217852469afddb3
1249 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
1250 Date: Wed Mar 12 17:55:15 2008 +0900
1252 sh: Add maintainer of R7780MP to MAINTAINER file
1254 Update MAINTAINER entry for R7780MP. And fix maintainer's name.
1256 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
1258 commit f5e2466f7baa887a7df0c536333eea8231333497
1259 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
1260 Date: Tue Mar 25 17:11:24 2008 +0900
1262 sh: Add support Renesas Solutions R2D plus board
1264 R2D plus is SH reference board used with SH7751R.
1265 This board has 266Mhz CPU, 64MB SDRAM, Cardbus, CF interface,
1266 one PCI bus, VGA, and two Ethernet controller.
1268 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
1270 commit e92c95180bb5bc5fd4051598a9d60beaba48988d
1271 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
1272 Date: Wed Mar 12 12:15:29 2008 +0900
1274 sh: Add support SH4 cache control
1276 Add support SH4 cache control and flash_cache function
1278 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
1280 commit 28e5efde4d925fcb34901d0030d0648de2da7e89
1281 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
1282 Date: Mon Mar 24 01:53:01 2008 +0900
1284 sh: Add support PCI host driver for SH7751/SH7751R
1286 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
1288 commit ab8f4d40d069cd3cbe7563ddfe3e5f03b0c7c721
1289 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
1290 Date: Mon Mar 24 02:11:26 2008 +0900
1292 sh: Move SuperH PCI driver from cpu/sh4 to drivers/pci
1294 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
1296 commit 566933278101c144d75361ea682678a326c1290d
1297 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
1298 Date: Wed Mar 12 12:10:28 2008 +0900
1300 sh: Add support SuperH SH7751/SH7751R
1302 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
1304 commit 3313e0e26224fc9a0c445124f3455058c696df84
1305 Author: Mark Jonas <toertel@gmail.com>
1306 Date: Mon Mar 10 11:37:10 2008 +0100
1308 sh: Added support for SH7720 based board MPR2.
1310 Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
1311 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
1313 commit 3ecff1d70ae93e628fe65b3fe1fc7c9c76cdf99f
1314 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
1315 Date: Thu Mar 6 14:05:53 2008 +0900
1317 sh: Fix receive FIFO level register of SH4A
1319 Receive FIFO level register is different in SH4A.
1320 Because register is different, cannot occasionally receive data.
1322 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
1324 commit c133c1fb0b590662206b0eba70f4478ee0300a9a
1325 Author: Yusuke Goda <goda.yusuke@renesas.com>
1326 Date: Tue Mar 11 12:55:12 2008 +0900
1328 sh: Add support Renesas Solutions R7780MP
1330 Renesas Solutions R7780MP is a reference board on SH7780.
1331 This board has serial, 10/100 base Ethernet deivice, CF slot
1332 and VGA devices. This board can set extension board.
1333 Extension board has 10/100/1000 base Ethernet device, PCI slot,
1336 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
1337 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
1339 commit 1a2334a4eb6386d7cd35d9de5fa39af2c764ad28
1340 Author: Yusuke Goda <goda.yusuke@renesas.com>
1341 Date: Wed Mar 5 14:30:02 2008 +0900
1343 sh: Add support PCI of SuperH and SH7780
1345 This patch add support PCI of SuperH base code and SH7780 specific code.
1347 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
1348 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
1350 commit b55523efff2ae11f0b9ae3cc405893c32eb78156
1351 Author: Yusuke Goda <goda.yusuke@renesas.com>
1352 Date: Wed Mar 5 14:23:26 2008 +0900
1354 sh: Add support SH7780
1356 SH7780 is CPU of Renesas Technology.
1360 - DDR-SDRAM controller
1363 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
1364 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
1366 commit c2042f5952a686c414031309b8f244513bf578f0
1367 Author: goda.yusuke <goda.yusuke@renesas.com>
1368 Date: Fri Jan 25 20:46:36 2008 +0900
1370 sh: Add support Renesas Solutions Migo-R board
1372 Migo-R is a board based on SH7722 and has may devices.
1373 In this patch, supported SCIF, NOR flash and Ethernet.
1375 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
1376 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
1378 commit 74d1e66d22dac91388bc538b2fe19f735edc5b82
1379 Author: Bartlomiej Sieka <tur@semihalf.com>
1380 Date: Thu Mar 27 15:06:40 2008 +0100
1382 Fix host tool build breakage, take two
1384 Revert commit 87c8431f and fix build breakage so that the build continues
1385 to work on FC systems.
1387 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
1389 commit 7e4a0d25ed18f6437bdf59ebfa49bb0edc2f24e6
1390 Author: Stefan Roese <sr@denx.de>
1391 Date: Wed Mar 19 09:36:47 2008 +0100
1393 ppc4xx: Enable ECC on LWMON5
1395 Since all ECC related problems seem to be resolved on LWMON5, this patch
1396 now enables ECC support.
1398 We have to write the ECC bytes by zeroing and flushing in smaller
1399 steps, since the whole 256MByte takes too long for the external
1402 Signed-off-by: Stefan Roese <sr@denx.de>
1404 commit 6433fa202a91a6594dd48f06807ac38ba27fa0bb
1405 Author: Larry Johnson <lrj@acm.org>
1406 Date: Mon Mar 17 11:10:35 2008 -0500
1408 ppc4xx: Updates to Korat-specific code
1410 This patch contains updates for changes for the Korat PPC440EPx board.
1411 These changes include:
1413 (1) Support for "permanent" and "upgradable" copies of U-Boot, as
1414 described in the new "doc/README.korat" file;
1416 (2) a new memory map for the registers in the board's CPLD;
1418 (3) a revised format for manufacturer's data in serial EEPROM; and
1420 (4) changes to track updates to U-Boot for the Sequoia board.
1422 Signed-off-by: Larry Johnson <lrj@acm.org>
1424 commit f766cdf89b3a2a7634b8c5869f606150e332036c
1425 Author: Markus Brunner <super.firetwister@gmail.com>
1426 Date: Thu Mar 27 10:46:25 2008 +0100
1428 ppc4xx: PPC405EP Set EMAC noise filter bits
1430 This bug was introduced with commit aee747f19b460a0e9da20ff21e90fdaac1cec359
1431 which enabled CFG_4xx_GPIO_TABLE for PPC405 and unintentionally
1432 disabled the setting of the emac noise filter bits for PPC405EP when CFG_4xx_GPIO_TABLE is set.
1434 Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
1435 Signed-off-by: Stefan Roese <sr@denx.de>
1437 commit f66e2c8b25c04b79e5fb385bc8989c2de7f63991
1438 Author: Mike Nuss <mike@terascala.com>
1439 Date: Wed Feb 20 11:54:20 2008 -0500
1441 ppc4xx: Reconfigure PLL for 667MHz processor for PPC440EPx
1443 On PPC440EPx without a bootstrap I2C EEPROM, the PLL can be reconfigured
1444 after startup to change the speed of the clocks. This patch adds the
1445 option CFG_PLL_RECONFIG. If this option is set to 667, the CPU
1446 initialization code will reconfigure the PLL to run the system with a CPU
1447 frequency of 667MHz and PLB frequency of 166MHz, without the need for an
1450 Signed-off-by: Mike Nuss <mike@terascala.com>
1451 Acked-by: Stefan Roese <sr@denx.de>
1453 commit 87c8431fe24d48121f053fe67cff4ccfe097d4d1
1454 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
1455 Date: Thu Mar 27 09:12:40 2008 +0100
1457 new-image: Fix host tool build breakage
1459 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
1461 commit 6fb4b640562a10daff0dbe537638d511b5b48650
1462 Author: Stefan Roese <sr@denx.de>
1463 Date: Thu Mar 27 10:24:03 2008 +0100
1465 ppc: Set CFG_MEM_TOP_HIDE to 0 if not already defined
1467 Signed-off-by: Stefan Roese <sr@denx.de>
1469 commit 9462732a3ec551c11862450902cd8ee1bedea6d9
1470 Author: Stefan Roese <sr@denx.de>
1471 Date: Wed Mar 19 10:23:43 2008 +0100
1473 ppc4xx: Add fdt support to Prodrive alpr
1475 Since this board will probably be ported to arch/powerpc in the
1476 near future, we add device tree support now. This way we are
1477 "ready" for arch/powerpc from now on.
1479 Signed-off-by: Stefan Roese <sr@denx.de>
1481 commit 511e4f9e7f7b6719e4d91d7f0fc89412b13b5150
1482 Author: Pieter Voorthuijsen <pieter.voorthuijsen@prodrive.nl>
1483 Date: Mon Mar 17 09:27:56 2008 +0100
1485 ppc4xx: Enable cache support on the ALPR board
1487 Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
1489 commit 14f73ca679f6fdb44cff0b7304d419db41a0ab69
1490 Author: Stefan Roese <sr@denx.de>
1491 Date: Wed Mar 26 10:14:11 2008 +0100
1493 ppc: Add CFG_MEM_TOP_HIDE option to hide memory area that doesn't get "touched"
1495 If CFG_MEM_TOP_HIDE is defined in the board config header, this specified
1496 memory area will get subtracted from the top (end) of ram and won't get
1497 "touched" at all by U-Boot. By fixing up gd->ram_size the Linux kernel
1498 should gets passed the now "corrected" memory size and won't touch it
1499 either. This should work for arch/ppc and arch/powerpc. Only Linux board
1500 ports in arch/powerpc with bootwrapper support, which recalculate the
1501 memory size from the SDRAM controller setup, will have to get fixed
1502 in Linux additionally.
1504 This patch enables this config option on some PPC440EPx boards as a workaround
1505 for the CHIP 11 errata. Here the description from the AMCC documentation:
1507 CHIP_11: End of memory range area restricted access.
1511 The 440EPx DDR controller does not acknowledge any
1512 transaction which is determined to be crossing over the
1513 end-of-memory-range boundary, even if the starting address is
1514 within valid memory space. Any such transaction from any PLB4
1515 master will result in a PLB time-out on PLB4 bus.
1518 In case of such misaligned bursts, PLB4 masters will not
1519 retrieve any data at all, just the available data up to the
1520 end of memory, especially the 440 CPU. For example, if a CPU
1521 instruction required an operand located in memory within the
1522 last 7 words of memory, the DCU master would burst read 8
1523 words to update the data cache and cross over the
1524 end-of-memory-range boundary. Such a DCU read would not be
1525 answered by the DDR controller, resulting in a PLB4 time-out
1526 and ultimately in a Machine Check interrupt. The data would
1527 be inaccessible to the CPU.
1530 Forbid any application to access the last 256 bytes of DDR
1531 memory. For example, make your operating system believe that
1532 the last 256 bytes of DDR memory are absent. AMCC has a patch
1533 that does this, available for Linux.
1535 This patch sets CFG_MEM_TOP_HIDE for the following 440EPx boards:
1536 lwmon5, korat, sequoia
1538 The other remaining 440EPx board were intentionally not included
1539 since it is not clear to me, if they use the end of ram for some
1540 other purpose. This is unclear, since these boards have CONFIG_PRAM
1541 defined and even comments like this:
1544 /* esd expects pram at end of physical memory.
1545 * So no logbuffer at the moment.
1548 It is strongly recommended to not use the last 256 bytes on those
1549 boards too. Patches from the board maintainers are welcome.
1551 Signed-off-by: Stefan Roese <sr@denx.de>
1553 commit c664bf8c3c9bb9e236891f0d8dfda883e86d159b
1554 Author: Stefan Roese <sr@denx.de>
1555 Date: Thu Mar 27 10:09:05 2008 +0100
1557 ppc4xx: Fix Canyonlands linker script (remove bogus ASSERT)
1559 Signed-off-by: Stefan Roese <sr@denx.de>
1561 commit d56a3ce179688cde61073a3690e21703d68fafd7
1562 Author: Stefan Roese <sr@denx.de>
1563 Date: Tue Mar 25 17:51:13 2008 +0100
1565 ppc4xx: Correctly pass phyiscal FLASH base address into dtb
1567 The routine ft_board_setup() configures the EBC NOR mappings for the
1568 Linux physmap_of driver. Since on 460EX/GT we remap the FLASH from
1569 0x4.fc00.0000 to 0x4.cc00.0000 because of the max. 16MByte boot-CS
1570 problem, we need to pass the corrected address here too.
1572 Signed-off-by: Stefan Roese <sr@denx.de>
1574 commit 9ad31989de12ce5c67b07c4867ead47465655c4b
1575 Author: Stefan Roese <sr@denx.de>
1576 Date: Wed Mar 19 16:35:12 2008 +0100
1578 ppc4xx: Fix compilation warning in 4xx_enet.c
1580 Signed-off-by: Stefan Roese <sr@denx.de>
1582 commit 4c9e855734c523900322a7c3cdd9099b4f51b51d
1583 Author: Stefan Roese <sr@denx.de>
1584 Date: Wed Mar 19 16:20:49 2008 +0100
1586 ppc4xx: Add AMCC Glacier 406GT eval board support
1588 This patch adds support for the AMCC Glacier 460GT eval board.
1589 The main difference to the Canyonlands board are listed here:
1591 - 4 ethernet ports instead of 2
1595 Currently EMAC2+3 are not working. This will be fixed in a later
1598 Signed-off-by: Stefan Roese <sr@denx.de>
1600 commit d8bd643141af4710d7f1b69bbab6b760de0af0a1
1601 Author: Stefan Roese <sr@denx.de>
1602 Date: Thu Mar 27 08:47:26 2008 +0100
1604 ppc4xx: Mask 'vec' with 0x1f in uic_interrupt() for bit set/clear
1606 Signed-off-by: Stefan Roese <sr@denx.de>
1608 commit b9670dd85be6e0496ef2e231043c23cad9b1d903
1609 Author: Anatolij Gustschin <agust@denx.de>
1610 Date: Wed Mar 26 21:05:43 2008 +0100
1612 Fix out of tree building issue
1614 Currently U-Boot building in some external directory
1615 doesn't work. This patch tries to fix the problem.
1617 Signed-off-by: Anatolij Gustschin <agust@denx.de>
1619 commit d4ee711d8a5c366ee3f857c26b927d12e66614ff
1620 Author: Anatolij Gustschin <agust@denx.de>
1621 Date: Wed Mar 26 18:13:33 2008 +0100
1623 README: update documentation (availability, links, etc.)
1627 Signed-off-by: Anatolij Gustschin <agust@denx.de>
1629 commit e813eae3bfeba9c0bda9d1bf9fc3d081f790972f
1630 Author: Anatolij Gustschin <agust@denx.de>
1631 Date: Wed Mar 26 17:47:44 2008 +0100
1633 Fix compilation error in cmd_usb.c
1635 This patch fixes compilation error
1636 cmd_usb.c: In function 'do_usb':
1637 cmd_usb.c:552: error: void value not ignored as it ought to be
1639 Signed-off-by: Anatolij Gustschin <agust@denx.de>
1641 commit d8c82db482d6b535d12b419d6440b88bf7091c9b
1642 Author: Timur Tabi <timur@freescale.com>
1643 Date: Fri Mar 14 17:45:29 2008 -0500
1645 Add support for setting the I2C bus speed in fsl_i2c.c
1647 Add support to the Freescale I2C driver (fsl_i2c.c) for setting and querying
1648 the I2C bus speed. Current 8[356]xx boards define the CFG_I2C_SPEED macro,
1649 but fsl_i2c.c ignores it and uses conservative value when programming the
1652 Signed-off-by: Timur Tabi <timur@freescale.com>
1653 Acked-by: Andy Fleming <afleming@freescale.com>
1655 commit d049cc7f71c0d875e8f5099d1ed23666a82b8f8e
1656 Author: Wolfgang Denk <wd@denx.de>
1657 Date: Thu Mar 27 00:03:57 2008 +0100
1659 Coding style cleanup, update CHANGELOG
1661 Signed-off-by: Wolfgang Denk <wd@denx.de>
1663 commit fd0b1fe3c388a77e8fe00cdd930ca317a91198d4
1664 Author: Dave Liu <r63238@freescale.com>
1665 Date: Wed Mar 26 22:55:32 2008 +0800
1667 drivers: add the support for Freescale SATA controller
1669 Add the Freescale on-chip SATA controller driver to u-boot,
1670 The SATA controller is used on the 837x and 8315 targets,
1671 The driver can be used to load kernel, fs and dtb.
1674 - 1.5/3 Gbps link speed
1675 - LBA48, LBA28 support
1676 - DMA and FPDMA support
1679 Signed-off-by: Dave Liu <daveliu@freescale.com>
1681 commit bede87f4c87c3ccd868cc60ebf792e0560c6d024
1682 Author: Dave Liu <r63238@freescale.com>
1683 Date: Wed Mar 26 22:54:44 2008 +0800
1685 ata: add the readme for SATA command line
1687 Signed-off-by: Dave Liu <daveliu@freescale.com>
1689 commit cd54081cd479e542fc399b8a40651ff11a1ad849
1690 Author: Dave Liu <r63238@freescale.com>
1691 Date: Wed Mar 26 22:53:24 2008 +0800
1693 ata: enable the sata initialize on boot up
1695 Signed-off-by: Dave Liu <daveliu@freescale.com>
1697 commit 69386383c5c2b323c66495b0b0cef6a9714d83bf
1698 Author: Dave Liu <r63238@freescale.com>
1699 Date: Wed Mar 26 22:52:36 2008 +0800
1701 ata: add the fis struct for SATA
1703 Signed-off-by: Dave Liu <daveliu@freescale.com>
1705 commit ffc664e80dfb2e17de0df5ad39e91a02e9c361bc
1706 Author: Dave Liu <r63238@freescale.com>
1707 Date: Wed Mar 26 22:51:44 2008 +0800
1709 ata: add the libata support
1711 add simple libata support in u-boot
1713 Signed-off-by: Dave Liu <daveliu@freescale.com>
1715 commit 8e9bb43429e50df55fa41932cbe65841ff579220
1716 Author: Dave Liu <r63238@freescale.com>
1717 Date: Wed Mar 26 22:50:45 2008 +0800
1719 ata: make the ata_piix driver using new SATA framework
1721 original ata_piix driver is using IDE framework, not real
1722 SATA framework. For now, the ata_piix driver is only used
1723 by x86 sc520_cdp board. This patch makes the ata_piix driver
1724 use the new SATA framework, so
1726 - remove the duplicated command stuff
1727 - remove the CONFIG_CMD_IDE define in the sc520_cdp.h
1728 - add the CONFIG_CMD_SATA define to sc520_cdp.h
1730 Signed-off-by: Dave Liu <daveliu@freescale.com>
1732 commit c7057b529c3c3cb9c0ac9060686a4068f1491bbe
1733 Author: Dave Liu <r63238@freescale.com>
1734 Date: Wed Mar 26 22:49:44 2008 +0800
1736 ata: add the support for SATA framework
1738 - add the SATA framework
1739 - add the SATA command line
1741 Signed-off-by: Dave Liu <daveliu@freescale.com>
1743 commit 83c7f470a4ce94f33600f11ae85ce4dcf00aa90c
1744 Author: Dave Liu <r63238@freescale.com>
1745 Date: Wed Mar 26 22:48:18 2008 +0800
1747 ata: merge the header of ata_piix driver
1749 move the sata.h from include/ to drivers/block/ata_piix.h
1751 Signed-off-by: Dave Liu <daveliu@freescale.com>
1753 commit 9eef62804d9695425b24c87b46a61a7fa74afee0
1754 Author: Dave Liu <r63238@freescale.com>
1755 Date: Wed Mar 26 22:47:06 2008 +0800
1757 ata: merge the ata_piix driver
1759 move the cmd_sata.c from common/ to drivers/ata_piix.c,
1760 the cmd_sata.c have some part of ata_piix controller drivers.
1761 consolidate the driver to have better framework.
1763 Signed-off-by: Dave Liu <daveliu@freescale.com>
1765 commit b9e749e95354f33eb5dc6653c6db7d502adb95fe
1766 Author: Markus Klotzbuecher <mk@denx.de>
1767 Date: Wed Mar 26 18:26:43 2008 +0100
1769 USB, Storage: fix a bug introduced in commit
1770 f6b44e0e4d18fe507833a0f76d24a9aa72c123f1 that will cause usb_stor_info
1771 to only print only information on one storage device, but not for
1774 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
1776 commit 841e5edd1623f3fecb6bffc5c2f938ed7a947360
1777 Author: Anatolij Gustschin <agust@denx.de>
1778 Date: Wed Mar 26 17:47:44 2008 +0100
1780 Fix compilation error in cmd_usb.c
1782 This patch fixes compilation error
1783 cmd_usb.c: In function 'do_usb':
1784 cmd_usb.c:552: error: void value not ignored as it ought to be
1786 Signed-off-by: Anatolij Gustschin <agust@denx.de>
1787 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
1789 commit dd6c910aadf27c822f17b87eae1a9bd0b2e3aa15
1790 Author: Kumar Gala <galak@kernel.crashing.org>
1791 Date: Wed Mar 26 08:53:53 2008 -0500
1793 85xx: Add cpu_mp_lmb_reserve helper to reserve boot page
1795 Provide a board_lmb_reserve helper function to ensure we reserve
1796 the page of memory we are using for the boot page translation code.
1798 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1800 commit 79679d80021ab095e639e250ca472fe526da02e2
1801 Author: Kumar Gala <galak@kernel.crashing.org>
1802 Date: Wed Mar 26 08:34:25 2008 -0500
1804 85xx: Update multicore boot mechanism to ePAPR v0.81 spec
1806 The following changes are needed to be inline with ePAPR v0.81:
1808 * r4, r5 and now always set to 0 on boot release
1809 * r7 is used to pass the size of the initial map area (IMA)
1810 * EPAPR_MAGIC value changed for book-e processors
1811 * changes in the spin table layout
1812 * spin table supports a 64-bit physical release address
1814 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1816 commit 25eedb2c1958a13110c7de1fc809b624053cc69c
1817 Author: Jon Loeliger <jdl@freescale.com>
1818 Date: Wed Mar 19 15:02:07 2008 -0500
1820 FSL: Clean up board/freescale/common/Makefile
1822 Each file that can be built here now follows some
1823 CONFIG_ option so that they are appropriately built
1824 or not, as needed. And CONFIG_ defines were added
1825 to various board config files to make sure that happens.
1827 The other board/freescale/*/Makefiles no longer need
1828 to reach up and over into ../common to build their
1829 individually needed files any more.
1831 Boards that are CDS specific were renamed with cds_ prefix.
1833 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1835 commit a5af4b358a7caa9c0aa374d4d894bf762ec37669
1836 Author: Kumar Gala <galak@kernel.crashing.org>
1837 Date: Wed Feb 27 22:00:27 2008 -0600
1839 85xx: Fix merge duplication
1841 ft_fixup_cpu() got duplicated in some merge snafu. Remove the duplicate.
1843 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1845 commit 5893b3d0a4084f87a06a5d3dc03db91206818941
1846 Author: James Yang <James.Yang@freescale.com>
1847 Date: Tue Feb 12 16:35:07 2008 -0600
1849 85xx: Expand CCSR space with more DDR controller registers.
1851 Signed-off-by: James Yang <James.Yang@freescale.com>
1852 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1853 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1855 commit a3e77fa5359b3f9f59e4e946b46d57a53057cc85
1856 Author: James Yang <James.Yang@freescale.com>
1857 Date: Fri Feb 8 18:05:08 2008 -0600
1859 85xx: Speed up get_ddr_freq() and get_bus_freq()
1861 get_ddr_freq() and get_bus_freq() used get_sys_info() each time they were
1862 called. However, get_sys_info() recalculates extraneous information when
1863 called each time. Have get_ddr_freq() and get_bus_freq() return memoized
1864 values from global_data instead.
1866 Signed-off-by: James Yang <James.Yang@freescale.com>
1867 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1869 commit e9ea679918fbc9a53fa2f2a904aac874ea736036
1870 Author: James Yang <James.Yang@freescale.com>
1871 Date: Fri Feb 8 16:46:27 2008 -0600
1873 85xx: Show DDR memory data rate in addition to the memory clock frequency.
1875 Show the DDR memory data rate in addition to the memory clock
1876 frequency. For DDR/DDR2 memories the memory data rate is 2x the
1879 Signed-off-by: James Yang <James.Yang@freescale.com>
1880 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1882 commit 591933ca6eabc440e6ed6967233aaf56fce464a3
1883 Author: James Yang <James.Yang@freescale.com>
1884 Date: Fri Feb 8 16:44:53 2008 -0600
1886 85xx: get_tbclk() speed up and rounding fix
1888 Speed up get_tbclk() by referencing pre-computed bus clock
1889 frequency value from global data instead of sys_info_t. Fix
1890 rounding of result to nearest; previously it was rounding
1893 Signed-off-by: James Yang <James.Yang@freescale.com>
1894 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1896 commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6
1897 Author: Andy Fleming <afleming@freescale.com>
1898 Date: Wed Feb 6 01:19:40 2008 -0600
1900 Update SVR numbers to expand support
1902 FSL has taken to using SVR[16:23] as an SOC sub-version field. This
1903 is used to distinguish certain variants within an SOC family. To
1904 account for this, we add the SVR_SOC_VER() macro, and update the SVR_*
1905 constants to reflect the larger value. We also add SVR numbers for all
1906 of the current variants. Finally, to make things neater, rather than
1907 use an enormous switch statement to print out the CPU type, we create
1908 and array of SVR/name pairs (using a macro), and print out the CPU name
1909 that matches the SVR SOC version.
1911 Signed-off-by: Andy Fleming <afleming@freescale.com>
1913 commit b83eef440cf3cef816172ccbb5897ccd8e403cf3
1914 Author: Andy Fleming <afleming@freescale.com>
1915 Date: Wed Feb 6 01:12:57 2008 -0600
1917 Add the Freescale PCI device IDs
1919 Signed-off-by: Andy Fleming <afleming@freescale.com>
1921 commit 7aff0c051ad0613171cf2b9941ee48675c62e7cd
1922 Author: Kumar Gala <galak@kernel.crashing.org>
1923 Date: Thu Feb 14 11:04:23 2008 -0600
1925 85xx: Added support for multicore boot mechanism
1927 Added the cpu command that provides a generic mechanism to get status,
1928 reset, and release secondary cores in multicore processors.
1930 Added support for using the ePAPR defined spin-table mechanism on 85xx.
1932 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1933 Signed-off-by: Andy Fleming <afleming@freescale.com>
1935 commit ec2b74ffd36f02c6123725e7c2533dd2deaf4b64
1936 Author: Kumar Gala <galak@kernel.crashing.org>
1937 Date: Thu Jan 17 16:48:33 2008 -0600
1939 85xx: Added support for multicore boot mechanism
1941 Added the cpu command that provides a generic mechanism to get status,
1942 reset, and release secondary cores in multicore processors.
1944 Added support for using the ePAPR defined spin-table mechanism on 85xx.
1946 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1948 commit f69766e4b5d47ecd3aa58677a8da875694f364f2
1949 Author: Kumar Gala <galak@kernel.crashing.org>
1950 Date: Wed Jan 30 14:55:14 2008 -0600
1952 85xx: Add the concept of CFG_CCSRBAR_PHYS
1954 When we go to 36-bit physical addresses we need to keep the concept of
1955 the physical CCSRBAR address seperate from the virtual one.
1957 For the majority of boards CFG_CCSBAR_PHYS == CFG_CCSRBAR
1959 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1961 commit 5b5eb9ca5b778f763bcf332697b35cc1e747626e
1962 Author: Wolfgang Denk <wd@denx.de>
1963 Date: Wed Mar 26 15:38:47 2008 +0100
1965 Coding style cleanup.
1967 Signed-off-by: Wolfgang Denk <wd@denx.de>
1969 commit da8808df7a9cef5a3d2ee286ef9ebf9de1780660
1970 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
1971 Date: Wed Mar 26 13:02:13 2008 +0100
1973 Add CFG_RTC_DS1337_NOOSC to turn off OSC output
1975 The default settings for RTC DS1337 keeps the OSC
1976 output, 32,768 Hz, on. This add CFG_RTC_DS1337_NOOSC to
1979 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
1981 commit 438a4c11260b4ea9805039b0b4f92f9df5306b02
1982 Author: Wolfgang Denk <wd@denx.de>
1983 Date: Wed Mar 26 11:48:46 2008 +0100
1985 Cleanup coding style, update CHANGELOG
1987 Signed-off-by: Wolfgang Denk <wd@denx.de>
1989 commit 218ca724c08ca8a649f0917cf201cf23d4b33f39
1990 Author: Wolfgang Denk <wd@denx.de>
1991 Date: Wed Mar 26 10:40:12 2008 +0100
1993 README: update documentation (availability, links, etc.)
1995 Signed-off-by: Wolfgang Denk <wd@denx.de>
1997 commit f6b44e0e4d18fe507833a0f76d24a9aa72c123f1
1998 Author: Aras Vaichas <arasv@magtech.com.au>
1999 Date: Tue Mar 25 12:09:07 2008 +1100
2001 USB Storage, add meaningful return value
2003 This patch changes the "usb storage" command to return success if it
2004 finds a USB storage device, otherwise it returns error.
2006 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
2008 commit 18e69a35efbb078403db0c0063986470dad7d082
2009 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
2010 Date: Fri Mar 14 23:20:18 2008 +0300
2012 83xx/fdt_support: let user specifiy FSL USB Dual-Role controller role
2014 Linux understands "host" (default), "peripheral" and "otg" (broken).
2015 Though, U-Boot doesn't restrict dr_mode variable to these values (think
2016 of renames in future).
2018 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2019 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2021 commit c7604783b236e368f225efb7b3efb418fe20b404
2022 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
2023 Date: Fri Mar 14 23:20:30 2008 +0300
2025 tsec: fix link detection for the RTL8211B PHY
2027 RTL8211B sets link state register after autonegotiation complete,
2028 so with bootdelay=0 RTL8211B will report lack of the link.
2030 To fix this, we should wait for aneg to complete, even if the
2031 link is currently down.
2033 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2034 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2036 commit 7fa9cbb00dc83fcf175042b6f20c2c9bce9a15f4
2037 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
2038 Date: Mon Mar 24 20:47:09 2008 +0300
2040 mpc83xx: add "fsl,soc" and "fsl,immr" compatible fixups
2042 device_type = "soc" is being deprecated, newer device trees will use
2043 "fsl,soc" and/or "fsl,immr" for the soc nodes.
2045 This patch also adds clock-frequency property for soc nodes (the same
2046 value as bus-frequency).
2048 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2050 commit 507e2d79c91441a0bb2cd3d0c31c8bfe3f8cec07
2051 Author: Joe D'Abbraccio <ljd015@freescale.com>
2052 Date: Mon Mar 24 13:00:59 2008 -0400
2054 Modified the DDR SDRAM clock control register to delay MCK/MCK_B 3/4 clock
2056 With the original value of 1/2 clock cycle delay, the system ran relatively
2057 stable except when we run benchmarks that are intensive users of memory.
2058 When I run samba connected disk with a HDBENCH test, the system locks-up
2059 or reboots sporadically.
2061 Signed-off by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com>
2063 commit a7ba32d480a86db5db8dcd8ca66b21b4cadda923
2064 Author: Scott Wood <scottwood@freescale.com>
2065 Date: Mon Mar 24 12:44:13 2008 -0500
2067 mpc83xx: Set PCI I/O bus-address base to zero.
2069 The device trees for these boards describe PCI I/O as starting from
2070 address zero from the device's perspective.
2072 Placing I/O elsewhere may cause problems with certain PCI boards, and may
2073 cause problems with Linux.
2075 Signed-off-by: Scott Wood <scottwood@freescale.com>
2077 commit f700e7df7fecf2d3765ae568ce77ce788cde4f3e
2078 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
2079 Date: Mon Mar 24 20:47:05 2008 +0300
2081 mpc83xx: MPC8360E-RDK: use 33.3(3)MHz CLKIN/SYS_CLK
2083 At least on the "33MHz Pilot" board crystal is actually 33.3MHz.
2084 This patch fixes "system time drifting" problem.
2086 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2088 commit 3a0cfdd576dc9b16d1468d37339182607c697fb7
2089 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
2090 Date: Mon Mar 24 20:47:02 2008 +0300
2092 mpc83xx: MPC8360E-RDK: define CONFIG_OF_STDOUT_VIA_ALIAS
2094 This is needed to update /choosen/linux,stdout-path properly.
2096 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2098 commit 3419eb62f088d7a22f1d2a3cebf76b77e408b5b9
2099 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
2100 Date: Mon Mar 24 20:47:00 2008 +0300
2102 mpc83xx: MPC8360E-RDK: add dhcp command
2104 Plus modify environment to use it and remove bootfile env variable,
2105 it is internal and CONFIG_BOOTFILE is used for these purposes.
2107 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2109 commit d892b2dbb4087a26778bfd42470c3ea7d0e2b6aa
2110 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
2111 Date: Mon Mar 24 20:46:57 2008 +0300
2113 mpc83xx: MPC8360E-RDK: rework ddr setup, enable ecc
2115 Current DDR setup easily causes memory corruption, this patch fixes it.
2117 Also fix TIMING_CFG0_MRS_CYC definition.
2119 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2121 commit d47d49cc37a38f2719a3e1b9bbe08ac810cf2d9a
2122 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
2123 Date: Mon Mar 24 20:46:53 2008 +0300
2125 mpc83xx: MPC8360E-RDK: configure pario pins for AD7843 and FHCI
2127 This patch adds qe pario pins configuration for AD7843 ADC/Touchscreen
2128 controller and FHCI (QE USB).
2130 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2132 commit 7ad959490962e6842648d87d4bd795ea6cdcce67
2133 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
2134 Date: Mon Mar 24 20:46:51 2008 +0300
2136 mpc83xx: MPC8360E-RDK: add support for NAND
2138 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2140 commit 9a3e832aeb491861d029991241572ebdf4b5b61b
2141 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
2142 Date: Mon Mar 24 20:46:46 2008 +0300
2144 mpc83xx: MPC8360E-RDK: use RGMII_RXID interface mode
2146 This is needed for BCM PHYs to work on this board.
2148 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2150 commit 300615dc5d9b0a2022fbc6af0c13159e33fd752e
2151 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
2152 Date: Mon Mar 24 20:46:34 2008 +0300
2154 uec: add support for Broadcom BCM5481 Gigabit PHY
2156 This patch adds basic support for Broadcom BCM5481 PHY.
2158 RXD-RXC delay quirk comes from MPC8360E-RDK BSP source, author is
2159 Peter Barada <peterb@logicpd.com>.
2161 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2163 commit 6a600c3a1876bc203445df4f0fd6b12648259666
2164 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
2165 Date: Mon Mar 24 20:46:28 2008 +0300
2167 uec: add support for RGMII_RXID interface mode
2169 PHY drivers will use it to setup software delay between RXD and RXC
2172 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2174 commit 91cdaa3a9d7562b869d96774e9c9ddf142c0848d
2175 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
2176 Date: Mon Mar 24 20:46:24 2008 +0300
2178 uec: add support for gbit mii status readings
2180 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2182 commit aabce7fb505ffe55ebf3bf4dcafdae97a581558d
2183 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
2184 Date: Mon Mar 24 17:40:47 2008 +0300
2186 83xx: define CONFIG_OF_STDOUT_VIA_ALIAS for the MPC837XERDB boards
2188 This is primarily for the early console support.
2190 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2192 commit 2bd7460e9283ec98565189b3cdbcfb2bcdcdd635
2193 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
2194 Date: Mon Mar 24 17:40:43 2008 +0300
2196 83xx: initialize serdes for MPC837XRDB boards
2198 On the MPC8377ERDB: 2 SATA and 2 PCI-E.
2199 On the MPC8378ERDB: 2 PCI-E
2200 On the MPC8379ERDB: 4 SATA
2202 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2204 commit 453316a2a19642d8afcbca7452e40a6b44a197b1
2205 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
2206 Date: Mon Mar 24 17:40:32 2008 +0300
2208 83xx: serdes setup routines
2210 This patch adds few routines to configure serdes on 837x targets.
2212 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2214 commit a796cdf9c377cb4e5d61d1079a296608f8fbd903
2215 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
2216 Date: Mon Mar 24 17:40:27 2008 +0300
2218 83xx: split COBJS onto separate lines
2220 ..plus get rid of some #ifdefs in the .c files.
2222 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2224 commit 46a3aeea73c13ab04ebf7a8739afb87ac5da94a3
2225 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
2226 Date: Mon Mar 24 17:40:23 2008 +0300
2228 83xx: nand support for MPC837XRDB boards
2230 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2232 commit 82e45a204190593e8613145a928f998fb8c909c4
2233 Author: Jerry Van Baren <gvb.uboot@gmail.com>
2234 Date: Tue Mar 18 21:44:41 2008 -0400
2236 Enable CONFIG_FLASH_SHOW_PROGRESS on the MPC8360EMDS.
2238 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2239 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2241 commit 0fa7a1b4719e325fce332689fb8754ec166191ff
2242 Author: Michael Barkowski <michael.barkowski@freescale.com>
2243 Date: Thu Mar 20 13:15:39 2008 -0400
2245 mpc8323erdb: remove RTC and add EEPROM
2247 There's no on-board RTC on the MPC8323ERDB, but there is an EEPROM.
2249 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
2250 Acked-by: Kim Phillips <kim.phillips@freescale.com>
2252 commit 5bbeea86eb6afb872374cd23217cb3c1018443ed
2253 Author: Michael Barkowski <michael.barkowski@freescale.com>
2254 Date: Thu Mar 20 13:15:34 2008 -0400
2256 mpc8323erdb: Improve the system performance
2258 The following changes are based on kernel UCC ethernet performance:
2260 1. Make the CSB bus pipeline depth as 4, and enable the repeat mode
2261 2. Optimize transactions between QE and CSB. Added CFG_SPCR_OPT
2262 switch to enable this setting.
2264 The following changes are based on the App Note AN3369 and
2265 verified to improve memory latency using LMbench:
2267 3. CS0_CONFIG[AP_n_EN] is changed from 1 to 0
2268 4. CS0_CONFIG[ODT_WR_CONFIG] set to 1. Was a reserved setting
2270 5. TIMING_CFG_1[WRREC] is changed from 3clks to 2clks (based on
2271 Twr=15ns, and this was already the setting in DDR_MODE)
2272 6. TIMING_CFG_1[PRETOACT] is changed from 3clks to 2clks. (based on
2274 7. TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 6clks. (based on
2276 8. TIMING_CFG_1[ACTTORW] is changed from 3clks to 2clks. (based on
2278 9. TIMING_CFG_1[REFREC] changed from 21 clks to 11clks. (based on
2280 10. TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 7clks. (based
2282 11. TIMING_CFG_2[ADD_LAT] and DDR_MODE[AL] changed from 0 to 1 (based
2285 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
2286 Acked-by: Kim Phillips <kim.phillips@freescale.com>
2288 commit fc549c871f43933396a5b3e21d897023d4b31b8d
2289 Author: Michael Barkowski <michael.barkowski@freescale.com>
2290 Date: Thu Mar 20 13:15:28 2008 -0400
2292 mpc8323erdb: use readable DDR config macros
2294 Use available shift/mask macros to define DDR configuration.
2296 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
2297 Acked-by: Kim Phillips <kim.phillips@freescale.com>
2299 commit 89c7784ed90ba50301eec521144f95111e472906
2300 Author: Timur Tabi <timur@freescale.com>
2301 Date: Fri Feb 8 13:15:55 2008 -0600
2303 83xx: Add Vitesse VSC7385 firmware uploading
2305 Update the MPC8349E-mITX, MPC8313E-RDB, and MPC837XE-RDB board files to upload
2306 the Vitesse VSC7385 firmware. Changed CONFIG_VSC7385 to CONFIG_VSC7385_ENET.
2307 Cleaned up the board header files to make selecting the VSC7385 easier to
2310 Signed-off-by: Timur Tabi <timur@freescale.com>
2311 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2313 commit b55d98c6d5b8694e560a0e727b14cb6921d7cfcc
2314 Author: Timur Tabi <timur@freescale.com>
2315 Date: Fri Feb 8 13:15:54 2008 -0600
2317 NET: Add Vitesse VSC7385 firmware uploading
2319 The Vitesse VSC7385 is a 5-port switch found on the Freescale MPC8349E-mITX
2320 and other boards. A small firwmare must be uploaded to its on-board memory
2321 before it can be enabled. This patch adds the code which uploads firmware
2322 (but not the firmware itself).
2324 Previously, this feature was provided by a U-Boot application that was
2325 made available only on Freescale BSPs. The VSC7385 firmware must still
2326 be obtained separately, but at least there is no longer a need for a separate
2329 Signed-off-by: Timur Tabi <timur@freescale.com>
2330 Acked-by: Ben Warren <biggerbadderben@gmail.com>
2332 commit aa6f6d171a1f9f46ee4f03ad6acb97a6bfb71855
2333 Author: Wolfgang Denk <wd@denx.de>
2334 Date: Wed Mar 26 00:52:10 2008 +0100
2336 Coding Style cleanyp; update CHANGELOG
2338 Signed-off-by: Wolfgang Denk <wd@denx.de>
2340 commit 43ddd9c820fec44816188f53346b464e20b3142d
2341 Author: Jerry Van Baren <gvb.uboot@gmail.com>
2342 Date: Sat Mar 22 14:23:49 2008 -0400
2344 Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T
2346 These defines embedded the u-boot env variables and/or the bd_t structure
2347 in the fdt blob. The conclusion of discussion on the u-boot email list
2348 was that embedding these in the fdt blob is not useful: there are better
2349 ways of passing the data (in fact, the fdt blob itself replaces the
2352 The only board that enables these is the stxxtc and they don't appear
2353 to be used by linux.
2355 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2356 Acked-by: Kim Phillips <kim.phillips@freescale.com>
2358 commit 22ed2285743359fd1fe73e411dff914b2256e68f
2359 Author: Stefan Roese <sr@denx.de>
2360 Date: Mon Mar 17 10:49:25 2008 +0100
2362 rtc: Remove 2nd reference to max6900.o in drivers/rtc/Makefile
2364 Signed-off-by: Stefan Roese <sr@denx.de>
2366 commit 1bb707c39a0833e91d9f797dd862aaaaf4af264d
2367 Author: Kyungmin Park <kmpark@infradead.org>
2368 Date: Mon Mar 17 08:54:06 2008 +0900
2370 Add Flex-OneNAND booting support
2372 Flex-OneNAND is a monolithic integrated circuit with a NAND Flash array
2373 using a NOR Flash interface. This on-chip integration enables system designers
2374 to reduce external system logic and use high-density NAND Flash
2375 in applications that would otherwise have to use more NOR components.
2377 Flex-OneNAND enables users to configure to partition it into SLC and MLC areas
2378 in more flexible way. While MLC area of Flex-OneNAND can be used to store data
2379 that require low reliability and high density, SLC area of Flex-OneNAND
2380 to store data that need high reliability and high performance. Flex-OneNAND
2381 can let users take advantage of storing these two different types of data
2382 into one chip, which is making Flex-OneNAND more cost- and space-effective.
2384 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2386 commit c512389cc4a10253249271ff6c887c6dab1f0db2
2387 Author: André Schwarz <andre.schwarz@matrix-vision.de>
2388 Date: Thu Mar 13 13:50:52 2008 +0100
2390 MPC5200: support setup without FEC
2392 Include FEC specific nodes in ft_cpu_setup only if CONFIG_MPC5xxx_FEC is
2393 defined. Systems without FEC, i.e. no FEC node in DTB, should be possible.
2395 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
2396 Acked-by: Grant Likely <grant.likely@secretlab.ca>
2398 commit aa3511e422946041ef626f80a05ae5e8bfc700e6
2399 Author: Jon Loeliger <jdl@freescale.com>
2400 Date: Wed Mar 5 18:05:46 2008 -0600
2402 FSL: Move board/mpc8266ads under board/freescale
2404 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2406 commit 7f1d846e5c5754449c286587d099d85246062772
2407 Author: Jon Loeliger <jdl@freescale.com>
2408 Date: Wed Mar 5 18:05:47 2008 -0600
2410 FSL: Move board/mpc7448hpc2 under board/freescale
2412 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2414 commit b7e24d283e34727c2a6cdfdac2e09a426c579b73
2415 Author: Jon Loeliger <jdl@freescale.com>
2416 Date: Wed Mar 5 18:05:45 2008 -0600
2418 FSL: Move board/mpc8260ads under board/freescale
2420 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2422 commit 6a8a5dc4759867c45aa95580deb8bf26669a5d97
2423 Author: goda.yusuke <goda.yusuke@renesas.com>
2424 Date: Wed Mar 5 17:08:33 2008 +0900
2426 net: Add support AX88796L ethernet device
2428 AX88796L is device of NE2000 compatible.
2429 This patch support AX88796L ethernet device.
2431 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
2432 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2434 commit e0a6140dd381e1eed1ada2291166ef2616d8822b
2435 Author: Wolfgang Denk <wd@denx.de>
2436 Date: Tue Mar 25 22:50:41 2008 +0100
2438 ne2000 driver: change #ifdef to Makefile conditional compilation
2440 Signed-off-by: Wolfgang Denk <wd@denx.de>
2442 commit e710185aae90c64d39c2d453e40e58ceefe4f250
2443 Author: goda.yusuke <goda.yusuke@renesas.com>
2444 Date: Wed Mar 5 17:08:20 2008 +0900
2446 net: Divided code of NE2000 ethernet driver
2448 There are more devices of the NE2000 base.
2449 A present code is difficult for us to support more devices.
2450 To support more NE2000 clone devices, separated the function.
2452 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
2453 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2455 commit 395bce4f59a507a60a475f7ee46bed47de9482df
2456 Author: Mike Frysinger <vapier@gentoo.org>
2457 Date: Sun Feb 24 23:58:13 2008 -0500
2459 net/Blackfin: move on-chip MAC driver into drivers/net/
2461 The Blackfin on-chip MAC driver was being managed in the BF537-STAMP board
2462 directory, but it is not board specific, so relocate it to the drivers dir
2463 so that other Blackfin ports can utilize it.
2465 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2467 commit 8a30b4700942f37495d2e67f5998cdffb6e3ba8a
2468 Author: Mike Frysinger <vapier@gentoo.org>
2469 Date: Sun Feb 24 23:52:35 2008 -0500
2471 smc91111: use SSYNC() rather than asm(ssync) for Blackfin
2473 Since the "ssync" instruction may have hardware anomalies associated with
2474 it, have the smc91111 driver use the SSYNC macro rather than invoking it
2475 directly. We workaround all the anomalies via this macro.
2477 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2479 commit 77ff7b7444ceb8022b46114f3d0b6d18e2fd1138
2480 Author: Bryan O'Donoghue <bodonoghue@codehermit.ie>
2481 Date: Sun Feb 17 22:57:47 2008 +0000
2483 8xx: Update OF support on 8xx
2485 This patch does some shifting around of OF support on 8xx.
2487 Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>
2489 commit 9c666a7db0b2285a270c68810889ce7d5dba304b
2490 Author: Kumar Gala <galak@kernel.crashing.org>
2491 Date: Fri Feb 15 15:16:18 2008 -0600
2493 ppc: Allow boards to specify how much memory they can map
2495 For historical reasons we limited the stack to 256M because some boards
2496 could only map that much via BATS. However newer boards are capable of
2497 mapping more memory (for example 85xx is capble of doing up to 2G).
2499 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2501 commit a6f5f317cd074bbbfa2aab4fca05904c811c19fb
2502 Author: Bryan O'Donoghue <bodonoghue@codehermit.ie>
2503 Date: Fri Feb 15 01:05:58 2008 +0000
2505 8xx : Add OF support to Adder875 board port - resubmit
2507 Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>
2509 commit d058698fd2d9f769ff38ac53c8708b3fdd314f2d
2510 Author: Kumar Gala <galak@kernel.crashing.org>
2511 Date: Thu Feb 14 20:44:42 2008 -0600
2515 Add a simple expr style command that will set an env variable as the result
2516 of the command. This allows us to do simple math in shell. The following
2517 operations are supported: &, |, ^, +, -, *, /.
2519 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2521 commit 3f105faa64b9826e088711fdfcaa70cb1230397a
2522 Author: Jon Loeliger <jdl@freescale.com>
2523 Date: Wed Mar 5 17:27:48 2008 -0600
2525 FSL: Move board/mpc7448hpc2 under board/freescale
2527 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2529 commit 449c703374a8868453425e15da7e2f76221b72e4
2530 Author: Jon Loeliger <jdl@freescale.com>
2531 Date: Wed Mar 5 17:21:43 2008 -0600
2533 FSL: Move board/mpc8266ads under board/freescale
2535 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2537 commit 5863577989ad689427bb750107e9a75f1c1645d2
2538 Author: Jon Loeliger <jdl@freescale.com>
2539 Date: Wed Mar 5 16:41:41 2008 -0600
2541 FSL: Move board/mpc8260ads under board/freescale
2543 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2545 commit 8a773983957ee6c4aa344469b742f29c7d26afbd
2546 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2547 Date: Tue Mar 25 21:30:08 2008 +0900
2549 [MIPS] Move gth2_config from ARM section to MIPS
2551 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2553 commit 373b16fc0c5ae34d28b9027f809ae3cbf45cdd15
2554 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2555 Date: Tue Mar 25 21:30:07 2008 +0900
2557 [MIPS] Extend MIPS_MAX_CACHE_SIZE upto 64kB
2559 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2561 commit d98e348e2ed5aab8f7a6471ff628ab0688b8a459
2562 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2563 Date: Tue Mar 25 21:30:07 2008 +0900
2565 [MIPS] Fix dcache_status()
2567 You can't judge UNCACHED by Config.K0 LSB.
2569 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2571 commit b0c66af53ec9385ac2d1cc2e5d7d1ecdc81caf34
2572 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2573 Date: Tue Mar 25 21:30:07 2008 +0900
2575 [MIPS] Introduce _machine_restart
2577 Handles machine specific functions by using weak functions.
2579 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2581 commit decaba6f5cf386d569ac3997bebb871b966c6b18
2582 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2583 Date: Tue Mar 25 21:30:07 2008 +0900
2585 [MIPS] Cleanup CP0 Status initialization
2587 Add setup_c0_status from Linux. For the moment we disable interrupts, set
2588 CU0, mark the kernel mode, and clear ERL and EXL. This is good enough for
2589 reset-time configuration and will work well across most processors.
2591 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2593 commit d43d43ef2845af309c25a64bb9c2c5fb3261bc23
2594 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2595 Date: Tue Mar 25 21:30:07 2008 +0900
2597 [MIPS] Initialize CP0 Cause before setting up CP0 Status register
2599 Without this change, we'll be suffering from deffered WATCH exception
2600 once Status.EXL is cleared. Make sure Cause.WP is cleared.
2602 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2604 commit 26138623230ca2bad3c78e05a65527ea70c8b688
2605 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2606 Date: Tue Mar 25 21:30:07 2008 +0900
2608 [MIPS] INCA-IP: Move watchdog init code from start.S to lowlevel_init()
2610 Move things to appropriate place.
2612 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2614 commit ccf8f824ef67df028dedb29f8ea5d71a5a88d895
2615 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2616 Date: Tue Mar 25 21:30:06 2008 +0900
2618 [MIPS] Implement flush_cache()
2620 We do Hit_Writeback_Inv_D and Hit_Invalidate_I. You might think that you
2621 don't need to do Hit_Invalidate_I, but flush_cache() needs it since this
2622 function is used not only in U-Boot specfic programs but also at loading
2625 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2627 commit 2e0e5271aac917812a76c72030a2b2c6f1d3387d
2628 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2629 Date: Tue Mar 25 21:30:06 2008 +0900
2631 [MIPS] Fix I-/D-cache initialization loops
2633 Currently we do 1) Index_Store_Tag_I, 2) Fill and 3) Index_Store_Tag_I
2634 again per a loop for I-cache initialization. But according to 'See MIPS
2635 Run', we're encouraged to use three separate loops rather than combining
2636 them *for both I- and D-cache*. This patch tries to fix this.
2638 In accordance with fixing above, mips_init_[id]cache are separated from
2639 mips_cache_reset(), and rewrite cache loops are completely rewritten with
2642 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2644 commit 1898840797c7f50799377bd5b285a8a93a82c419
2645 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2646 Date: Tue Mar 25 21:30:06 2008 +0900
2648 [MIPS] Replace memory clearance code with f_fill64
2650 This routine fills memory with zero by 64 bytes, and is 64-bit capable.
2652 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2654 commit 2f5d414ccb4024dd0992ff6b22561732dbc73590
2655 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2656 Date: Tue Mar 25 21:30:06 2008 +0900
2658 [MIPS] cpu/mips/cache.S: Introduce NESTED/LEAF/END macros
2660 This patch replaces the current function definitions with NESTED, LEAF
2661 and END macro. They specify some more additional information about the
2662 function; an alignment of symbol, type of symbol, stack frame usage, etc.
2663 These information explicitly tells the assembler and the debugger about
2664 the types of code we want to generate.
2666 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2668 commit 282223a607c611425fa33f5428f8eae6636972bb
2669 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2670 Date: Tue Mar 25 11:43:17 2008 +0900
2672 [MIPS] asm headers' updates
2674 Make some asm headers adjusted to the latest Linux kernel.
2676 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2678 commit e1390801a3c1a2b6d12fa90be368efc19f5b9bfd
2679 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2680 Date: Tue Mar 25 11:39:29 2008 +0900
2682 [MIPS] Request for the 'mips_cache_lock()' removal
2684 The initial intension of having mips_cache_lock() was to use the cache
2685 as memory for temporary stack use so that a C environment can be set up
2686 as early as possible.
2688 But now mips_cache_lock() follow lowlevel_init(). We've already have the
2689 real memory initilaized at this point, therefore we could/should use it.
2690 No reason to lock at all.
2694 Cache locking is not consistent across MIPS implementaions. Some imple-
2695 mentations don't support locking at all. The style of locking varies -
2696 some support per line locking, others per way, etc. Some parts use bits
2697 in status registers instead of cache ops. Current mips_cache_lock() is
2698 not necessarily general-purpose.
2700 And this is worthy of special mention; once U-Boot/MIPS locks the lines,
2701 they are never get unlocked, so the code relies on whatever gets loaded
2702 after U-Boot to re-initialize the cache and clear the locks. We're sup-
2703 posed to have CFG_INIT_RAM_LOCK and unlock_ram_in_cache() implemented,
2704 but leave the situation as it is for a long time.
2706 For these reasons, I proposed the removal of mips_cache_lock() from the
2707 global start-up code.
2709 This patch adds CFG_INIT_RAM_LOCK_MIPS to make existing users aware that
2710 *things have changed*. If he wants the same behavior as before, he needs
2711 to have CFG_INIT_RAM_LOCK_MIPS in his config file.
2713 If we don't have any regression report through several releases, then
2714 we'll remove codes entirely.
2716 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2717 Acked-by: Andrew Dyer <amdyer@gmail.com>
2719 commit 0d48926c87ec96f974a6ac4034f4a2f2eab3255f
2720 Author: Yuri Tikhonov <yur@emcraft.com>
2721 Date: Mon Mar 24 11:30:54 2008 +0100
2723 lwmon5 SYSMON POST: fix backlight control
2725 If the LWMON5 config has SYSMON POST among CONFIG_POSTs which may be
2726 run on the board, then the SYSMON POST controls the display backlight
2727 (doesn't switch backlight ON if POST FAILED, and does switch the
2728 backlight ON if PASSED).
2730 If not, then the video driver controls the display backlight (just
2731 switch ON the backlight upon initialization).
2733 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
2735 commit ff2bdfb2c1e073f65c065011f1e18d0a130bd3d8
2736 Author: Yuri Tikhonov <yur@emcraft.com>
2737 Date: Mon Mar 24 11:29:14 2008 +0100
2739 lwmon5 SYSMON POST: fix handling of negative temperatures
2741 Fix errors in the LWMON5 Sysmon POST for negative temperatures.
2743 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
2745 commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2
2746 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2747 Date: Fri Mar 7 16:04:25 2008 +0900
2749 pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option
2751 In current source code, when the device number of PCI is 0, process PCI
2752 bridge without fail. However, when the device number is 0, it is not PCI
2753 always bridge. There are times when device of PCI allocates.
2755 When CONFIG_PCI_SKIP_HOST_BRIDGE is enable, this problem is solved when
2758 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2759 Acked-by: Stefan Roese <sr@denx.de>
2761 commit 86aea3eaefa248ffb9328e2b50c64720489cdbeb
2762 Author: Yuri Tikhonov <yur@emcraft.com>
2763 Date: Fri Mar 21 09:18:40 2008 +0100
2765 LWMON5: fix dsPIC POST
2767 Add test for DPIC_SYS_ERROR_REG to be zero in the LWMON5 dsPIC POST.
2769 Signed-off-by: Yuri Tikhonov <yur@emcraft.com> ---
2771 commit 388b82fddc7c05596f3f615f190da0448227dc82
2772 Author: Bartlomiej Sieka <tur@semihalf.com>
2773 Date: Thu Mar 20 23:23:13 2008 +0100
2775 [new uImage] Enable new uImage support for the pcs440ep board.
2777 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2779 commit 95f4ec2b9c910c7261e6f060ea530d58b039692d
2780 Author: Bartlomiej Sieka <tur@semihalf.com>
2781 Date: Thu Mar 20 23:23:13 2008 +0100
2783 [new uImage] Do not compile new uImage format support by default
2785 Disable default building of new uImage format support in preparation
2786 for merge with the master. Support for new format can be enabled on
2787 a per-board basis, by defining the following in the board's config file:
2789 #define CONFIG_FIT 1
2790 #define CONFIG_OF_LIBFDT 1
2792 This can be optionally defined to give more verbose output:
2794 #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */
2796 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2798 commit dafaede8a46c7159310239e036c93e31c6374487
2799 Author: Bartlomiej Sieka <tur@semihalf.com>
2800 Date: Thu Mar 20 23:20:31 2008 +0100
2802 [new uImage] Disable debuging output in preparation for merge with master
2804 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2806 commit fbe7a155027beacebaee9b32e1ada781fe924bca
2807 Author: Bartlomiej Sieka <tur@semihalf.com>
2808 Date: Thu Mar 20 19:38:45 2008 +0100
2810 [new uImage] Compilation and new uImage handling fixes for imxtract
2812 Fix imxtract command not being compiled-in despite CONFIG_CMD_XIMG being in
2813 include/config_cmd_default.h. Fix few warnings and handling of new format
2816 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2818 commit 36cc8cbb3379d5166f882641123521735c469f92
2819 Author: Bartlomiej Sieka <tur@semihalf.com>
2820 Date: Thu Mar 20 23:10:19 2008 +0100
2822 [new uImage] Fix autoscr command used with new uImage format
2824 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2826 commit 43142e817f0597be412e7cbe19413f5532eafa5d
2827 Author: Bartlomiej Sieka <tur@semihalf.com>
2828 Date: Thu Mar 20 23:10:19 2008 +0100
2830 [new uImage] Fix *.its files location in documentation
2832 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2834 commit 81a0ac62ea29f8252d0a714709d0ecfdbba2a15e
2835 Author: Wolfgang Denk <wd@denx.de>
2836 Date: Thu Mar 20 22:01:38 2008 +0100
2838 lwmon5 POST: remove unreachable code
2840 plus some coding style cleanup
2842 Signed-off-by: Wolfgang Denk <wd@denx.de>
2844 commit b73a19e1609d0f705cbab8014ca17aefe89e4c76
2845 Author: Yuri Tikhonov <yur@emcraft.com>
2846 Date: Thu Mar 20 17:56:04 2008 +0300
2848 LWMON5: POST RTC fix
2850 Modify the RTC API to provide one a status for the time reported by
2851 the rtc_get() function:
2852 0 - a reliable time is guaranteed,
2853 < 0 - a reliable time isn't guaranteed (power fault, clock issues,
2856 The RTC chip drivers are responsible for providing this info if the
2857 corresponding chip supports such functionality. If not - always
2858 report that the time is reliable.
2860 The POST RTC test was modified to detect the RTC faults utilizing
2861 this new rtc_get() feature.
2863 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
2865 commit a5cc5555ccee596908a7d8cf22a104f6b993bfd5
2866 Author: Martin Krause <martin.krause@tqs.de>
2867 Date: Wed Mar 19 14:25:14 2008 +0100
2869 TQM5200B: update MTD partition layout
2871 - insert partition for dtb blob to TQM5200B MTD layout
2872 - set env variables dependent on the configured board
2873 (TQM5200 or TQM5200B)
2875 Signed-off-by: Martin Krause <martin.krause@tqs.de>
2877 commit f0105727d132f56a21fa3ed8b162309cca6cac44
2878 Author: Stefan Roese <sr@denx.de>
2879 Date: Wed Mar 19 07:09:26 2008 +0100
2881 CFI: Small cleanup for FLASH_SHOW_PROGRESS
2883 With this patch we don't need that many #ifdef's in the code. It moves
2884 the subtraction into the macro and defines a NOP-macro when
2885 CONFIG_FLASH_SHOW_PROGRESS is not defined.
2887 Signed-off-by: Stefan Roese <sr@denx.de>
2888 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
2890 commit 9a042e9ca512beaaa2cb450274313fc477141241
2891 Author: Jerry Van Baren <gvb.uboot@gmail.com>
2892 Date: Sat Mar 8 13:48:01 2008 -0500
2894 Flash programming progress countdown.
2896 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2898 commit 5e339fd9ed539a7d7fec59cfc88f0857ab26a53f
2899 Author: Bartlomiej Sieka <tur@semihalf.com>
2900 Date: Wed Mar 19 10:00:06 2008 +0100
2902 [new uImage] Fix style issue spotted by Wolfgang Denk <wd@denx.org>
2904 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2906 commit 11abe45c48ec3485a6c1a5168ce8d79c3288adc1
2907 Author: David Gibson <david@gibson.dropbear.id.au>
2908 Date: Mon Feb 18 18:09:04 2008 +1100
2910 libfdt: Remove no longer used code from fdt_node_offset_by_compatible()
2912 Since fdt_node_offset_by_compatible() was converted to the new
2913 fdt_next_node() iterator, a chunk of initialization code became
2914 redundant, but was not removed by oversight. This patch cleans it up.
2916 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2918 commit d0ccb9b140b472039732de102fc14597eedb14df
2919 Author: David Gibson <david@gibson.dropbear.id.au>
2920 Date: Mon Feb 18 18:06:31 2008 +1100
2922 libfdt: Trivial cleanup for CHECK_HEADER)
2924 Currently the CHECK_HEADER() macro is defined local to fdt_ro.c.
2925 However, there are a handful of functions (fdt_move, rw_check_header,
2926 fdt_open_into) from other files which could also use it (currently
2927 they open-code something more-or-less identical). Therefore, this
2928 patch moves CHECK_HEADER() to libfdt_internal.h and uses it in those
2931 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2933 commit fe30a354cdbb808b5f15366a935b151a4ccee74f
2934 Author: Kumar Gala <galak@kernel.crashing.org>
2935 Date: Wed Feb 20 14:32:36 2008 -0600
2937 Fix fdt boardsetup command parsing
2939 The introduciton of the 'fdt bootcpu' broke parsing for 'fdt boardsetup'.
2941 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2943 commit 804887e6001e2f00bea11431bf34d6d472512cda
2944 Author: Kumar Gala <galak@kernel.crashing.org>
2945 Date: Fri Feb 15 03:34:36 2008 -0600
2947 Add sub-commands to fdt
2949 fdt header - Display header info
2950 fdt bootcpu <id> - Set boot cpuid
2951 fdt memory <addr> <size> - Add/Update memory node
2952 fdt rsvmem print - Show current mem reserves
2953 fdt rsvmem add <addr> <size> - Add a mem reserve
2954 fdt rsvmem delete <index> - Delete a mem reserves
2956 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2958 commit f84d65f9b085ffbed464d1d58e8aaa8f5a2efc07
2959 Author: David Gibson <david@gibson.dropbear.id.au>
2960 Date: Thu Feb 14 16:50:34 2008 +1100
2962 libfdt: Fix NOP handling bug in fdt_add_subnode_namelen()
2964 fdt_add_subnode_namelen() has a bug if asked to add a subnode to a
2965 node which has NOP tags interspersed with its properties. In this
2966 case fdt_add_subnode_namelen() will put the new subnode before the
2967 first NOP tag, even if there are properties after it, which will
2968 result in an invalid blob.
2970 This patch fixes the bug, and adds a testcase for it.
2972 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2974 commit ae0b5908de3b9855f8931bc9b32c9fc4962df5a9
2975 Author: David Gibson <david@gibson.dropbear.id.au>
2976 Date: Tue Feb 12 11:58:31 2008 +1100
2978 libfdt: Add and use a node iteration helper function.
2980 This patch adds an fdt_next_node() function which can be used to
2981 iterate through nodes of the tree while keeping track of depth. This
2982 function is used to simplify the iteration code in a lot of other
2983 functions, and is also exported for use by library users.
2985 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2987 commit 9eaeb07a7185d852c7aa10735ecd4e9edf24fb5d
2988 Author: David Gibson <david@gibson.dropbear.id.au>
2989 Date: Fri Jan 11 14:55:05 2008 +1100
2991 libfdt: Add fdt_set_name() function
2993 This patch adds an fdt_set_name() function to libfdt, mirroring
2994 fdt_get_name(). This is a r/w function which alters the name of a
2995 given device tree node.
2997 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2999 commit 23e20aa6488e6c0622496549861bfdc74108debe
3000 Author: Yuri Tikhonov <yur@pollux.denx.de>
3001 Date: Tue Mar 18 13:33:30 2008 +0100
3003 lwmon5: Fix register test logic to match the specific GDC h/w.
3005 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
3006 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
3008 commit 46bc0a938779aa1d664b847d36b08aa00f22e539
3009 Author: Yuri Tikhonov <yur@pollux.denx.de>
3010 Date: Tue Mar 18 13:27:57 2008 +0100
3012 Fix backlight in the lwmon5 POST.
3014 Backlight was switched on even when temperature was too low.
3016 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
3017 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
3019 commit 3d61018643a2cd38c145aa6dde53f3f5f1a0e9cf
3020 Author: Yuri Tikhonov <yur@pollux.denx.de>
3021 Date: Wed Feb 6 18:48:36 2008 +0100
3023 The patch introduces the alternative configuration of the log buffer for the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory), the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ..., PPC440EPX_GPT0_COMP5).
3025 To enable this, alternative, configuration the U-Boot board configuration
3026 file for lwmon5 includes the definitions of alternative addresses for header
3027 (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR).
3029 The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set,
3030 and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the
3031 lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h).
3033 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
3035 commit 0f009f781b5b88f25769e154ea4d42db13baf0c6
3036 Author: Yuri Tikhonov <yur@pollux.denx.de>
3037 Date: Mon Feb 4 17:11:53 2008 +0100
3039 Add support for the lwmon5 board reset via GPIO58.
3041 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
3042 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
3044 commit f694e32f93565ec1fa8d0226c584d6b89e931ed9
3045 Author: Yuri Tikhonov <yur@pollux.denx.de>
3046 Date: Mon Feb 4 17:09:55 2008 +0100
3048 Some fixes to dspic, fpga, and gdc post tests for lwmon5. Disable external watch-dog for now.
3050 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
3051 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
3053 commit b428f6a8c65c5303e5f96db8d24f2f699d94a98c
3054 Author: Yuri Tikhonov <yur@pollux.denx.de>
3055 Date: Mon Feb 4 14:11:03 2008 +0100
3057 The patch introduces the CRITICAL feature of POST tests. If the test marked as POST_CRITICAL fails then the alternative, post_critical, boot-command is used. If this command is not defined then U-Boot enters into interactive mode.
3059 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
3060 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
3062 commit 8f15d4addd49c956412e1e3bfc764a0c8b1f3184
3063 Author: Yuri Tikhonov <yur@pollux.denx.de>
3064 Date: Mon Feb 4 14:10:42 2008 +0100
3066 The patch adds new POST tests for the Lwmon5 board. These are:
3068 * External Watchdog test;
3074 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
3075 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
3077 commit c2ed33efbfff5767bca236828e021c55fd547b6c
3078 Author: Yuri Tikhonov <yur@pollux.denx.de>
3079 Date: Mon Feb 4 14:10:01 2008 +0100
3081 Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP.
3083 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
3085 commit 3515fd18d4e8e44f863ac7142b55e22b109e9af2
3086 Author: Wolfgang Denk <wd@denx.de>
3087 Date: Tue Mar 18 17:35:51 2008 +0100
3089 HMI1001: fix compile problem.
3091 Signed-off-by: Wolfgang Denk <wd@denx.de>
3093 commit 1f2a9970109cebf7446e0503b10b71f8673045ee
3094 Author: Mike Frysinger <vapier@gentoo.org>
3095 Date: Mon Feb 18 05:32:30 2008 -0500
3097 Blackfin: BF537-stamp: drop board-specific flash driver for CFI
3099 The parallel flash on the BF537-STAMP is CFI compliant, so there is no need
3100 for the board specific driver at all. Just use the common CFI driver.
3102 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3104 commit 5b22163fef865af2b6bfb6b75f1b7bf443ce170c
3105 Author: Mike Frysinger <vapier@gentoo.org>
3106 Date: Tue Feb 19 00:36:14 2008 -0500
3108 Blackfin: add proper ELF markings to some assembly functions
3110 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3112 commit cf675d3b2b9c3511c1d99bc8f8f38fd2f08bfcaf
3113 Author: Mike Frysinger <vapier@gentoo.org>
3114 Date: Tue Feb 19 00:35:17 2008 -0500
3116 Blackfin: new cplbinfo command for viewing cplb tables
3118 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3120 commit aadb72503cd1602349a5fe53356d5f55ecc1b900
3121 Author: Mike Frysinger <vapier@gentoo.org>
3122 Date: Mon Feb 18 05:37:51 2008 -0500
3124 Blackfin: update MAINTAINERS list
3126 Add maintainer information for the Blackfin boards.
3128 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3130 commit f7ce12cb65a30c6e152eecf26f0304b7d78cf39d
3131 Author: Mike Frysinger <vapier@gentoo.org>
3132 Date: Mon Feb 18 05:26:48 2008 -0500
3134 Blackfin: convert BFIN_CPU to CONFIG_BFIN_CPU
3136 Stop tying things to the processor that should be tied to other defines and
3137 change BFIN_CPU to CONFIG_BFIN_CPU so that it can be used in the build
3138 system to select the -mcpu option.
3140 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3142 commit 86a20fb920bd198105acf7b1191117f566d637ed
3143 Author: Mike Frysinger <vapier@gentoo.org>
3144 Date: Sat Feb 16 07:40:36 2008 -0500
3146 Blackfin: move bootldr command to common code
3148 This moves the Blackfin-common bootldr command out of the BF537-STAMP
3149 specific board directory and into the common directory so that all Blackfin
3150 boards may utilize it.
3152 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3154 commit decbe029b2a9d3333d02c433389b1c821eea96d7
3155 Author: Heiko Schocher <hs@denx.de>
3156 Date: Fri Mar 14 11:05:20 2008 +0100
3158 mgcoge: update configuration
3160 Fix configuration for mgcoge board
3162 Signed-off-by: Heiko Schocher <hs@denx.de>
3164 commit c136724cda0219c49f1d4b346f00da29b14fdf14
3165 Author: Wolfgang Denk <wd@denx.de>
3166 Date: Sun Mar 16 01:22:59 2008 +0100
3168 drivers/rtc/Makefile: keep list sorted
3170 Signed-off-by: Wolfgang Denk <wd@denx.de>
3172 commit 9536dfcce03e7be4ccbceb47a08d9ba07ada362f
3173 Author: Tor Krill <tor@excito.com>
3174 Date: Sat Mar 15 15:40:26 2008 +0100
3176 Add support for Intersil isl1208 RTC
3178 Signed-off-by: Tor Krill <tor@excito.com>
3180 commit 0210cff3d079d97b2156b13685ee8de368e68a1a
3181 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3182 Date: Sat Mar 15 17:36:41 2008 +0100
3186 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3188 commit 0b8f2a27861a9fd06eb55a34f855ec9c5102aab4
3189 Author: Wolfgang Denk <wd@denx.de>
3190 Date: Sun Mar 16 01:12:58 2008 +0100
3192 Conding style cleanup
3194 Signed-off-by: Wolfgang Denk <wd@denx.de>
3196 commit 41712b4e8c95dff23354bcd620e1f9477160c190
3197 Author: Stefan Roese <sr@denx.de>
3198 Date: Wed Mar 5 12:31:53 2008 +0100
3200 ppc4xx: Add USB OHCI support to AMCC Canyonlands 460EX eval board
3202 This patch adds USB OHCI support to the Canyonlands board port. It also
3203 enables EXT2 support.
3205 Signed-off-by: Stefan Roese <sr@denx.de>
3207 commit 2596f5b9d353ff3e4387a3325d05740f16958038
3208 Author: Stefan Roese <sr@denx.de>
3209 Date: Wed Mar 5 12:29:32 2008 +0100
3211 usb: Add CFG_OHCI_USE_NPS to common USB-OHCI driver
3213 This patch adds CFG_OHCI_USE_NPS to the common USB-OHCI driver. This
3214 way a board just needs to define this new option to enable the "force
3215 NoPowerSwitching mode" instead of adding new CPU/architecture defines
3216 to the USB source itself.
3218 This new option will be used first with the new AMCC 460EX Canyonlands
3219 board port, which will be posted in a few days.
3221 This patch also fixes a small compilation problem when DEBUG is enabled.
3223 Signed-off-by: Stefan Roese <sr@denx.de>
3225 commit 71665ebf88408ff2acb762af47989fd4365b321a
3226 Author: Stefan Roese <sr@denx.de>
3227 Date: Mon Mar 3 17:27:02 2008 +0100
3229 ppc4xx: Add Canyonlands NAND booting support
3231 460EX doesn't support a fixed bootstrap option to boot from 512 byte page
3232 NAND devices. The only bootstrap option for NAND booting is option F for
3233 2k page devices. So to boot from a 512 bype page device, the I2C bootstrap
3234 EEPROM needs to be programmed accordingly.
3236 This patch adds basic NAND booting support for the AMCC Canyonlands aval
3237 board and also adds support to the "bootstrap" command, to enable NAND
3238 booting I2C setting.
3240 Tested with 512 byte page NAND device (32MByte) on Canyonlands.
3242 Signed-off-by: Stefan Roese <sr@denx.de>
3244 commit c813f1f835a7edfdb929f2843b09db72cd5cd2f2
3245 Author: Stefan Roese <sr@denx.de>
3246 Date: Tue Mar 11 16:53:00 2008 +0100
3248 ppc4xx: Add AMCC Canyonlands support (460EX) (3/3)
3250 This patch adds support for the AMCC Canyonlands 460EX evaluation
3253 Signed-off-by: Stefan Roese <sr@denx.de>
3255 commit 6983fe21f774a924d3adb263a270bc2f301f2aa2
3256 Author: Stefan Roese <sr@denx.de>
3257 Date: Tue Mar 11 16:52:24 2008 +0100
3259 ppc4xx: Add AMCC Canyonlands support (460EX) (2/3)
3261 This patch adds support for the AMCC Canyonlands 460EX evaluation
3264 Signed-off-by: Stefan Roese <sr@denx.de>
3266 commit 8e1a3fe545bbcfceafe183344ebc9f1ad03819c1
3267 Author: Stefan Roese <sr@denx.de>
3268 Date: Tue Mar 11 16:51:17 2008 +0100
3270 ppc4xx: Add AMCC Canyonlands support (460EX) (1/3)
3272 This patch adds support for the AMCC Canyonlands 460EX evaluation
3275 Signed-off-by: Stefan Roese <sr@denx.de>
3277 commit 43c60992cdf72496e7eaaa3fbd37ebbe75835f69
3278 Author: Stefan Roese <sr@denx.de>
3279 Date: Tue Mar 11 15:11:43 2008 +0100
3281 ppc4xx: Add basic support for AMCC 460EX/460GT (5/5)
3283 This patch adds basic support for the AMCC 460EX/460GT PPC's.
3285 Signed-off-by: Stefan Roese <sr@denx.de>
3287 commit 6f2eb3f3d8ea2dbb224d0da5a12038693bab9945
3288 Author: Stefan Roese <sr@denx.de>
3289 Date: Tue Mar 11 15:11:18 2008 +0100
3291 ppc4xx: Add basic support for AMCC 460EX/460GT (4/5)
3293 This patch adds basic support for the AMCC 460EX/460GT PPC's.
3295 Signed-off-by: Stefan Roese <sr@denx.de>
3297 commit 999ecd5aca381984d8ebbeb207ece82a1c275577
3298 Author: Stefan Roese <sr@denx.de>
3299 Date: Tue Mar 11 15:07:10 2008 +0100
3301 ppc4xx: Add basic support for AMCC 460EX/460GT (3/5)
3303 This patch adds basic support for the AMCC 460EX/460GT PPC's.
3305 Signed-off-by: Stefan Roese <sr@denx.de>
3307 commit 2801b2d2a9906f206ab9ee8d0b6e746d2b7fe05a
3308 Author: Stefan Roese <sr@denx.de>
3309 Date: Tue Mar 11 15:05:50 2008 +0100
3311 ppc4xx: Add basic support for AMCC 460EX/460GT (2/5)
3313 This patch adds basic support for the AMCC 460EX/460GT PPC's.
3315 Signed-off-by: Stefan Roese <sr@denx.de>
3317 commit 8ac41e3e37c3080c6b1d9461d654161cfe2aa492
3318 Author: Stefan Roese <sr@denx.de>
3319 Date: Tue Mar 11 15:05:26 2008 +0100
3321 ppc4xx: Add basic support for AMCC 460EX/460GT (1/5)
3323 This patch adds basic support for the AMCC 460EX/460GT PPC's.
3325 Signed-off-by: Stefan Roese <sr@denx.de>
3327 commit 56e410178375d9f20be25fb24e180974f0ae120b
3328 Author: Stefan Roese <sr@denx.de>
3329 Date: Tue Feb 19 22:07:57 2008 +0100
3331 ppc4xx: interrupt.c reworked
3333 This patch is a rework of the 4xx interrupt handling done while
3334 adding the 460EX/GT support. Interrupts are needed on 4xx for the
3337 Signed-off-by: Stefan Roese <sr@denx.de>
3339 commit 84a999b6cdd0b02dc7de2cacc306eaa84afe2b46
3340 Author: Stefan Roese <sr@denx.de>
3341 Date: Tue Feb 19 22:01:57 2008 +0100
3343 ppc4xx: program_tlb now uses 64bit physical addess
3345 This patch changes the physical addess parameter from 32bit to 64bit.
3346 This is needed for 36bit 4xx platforms to access areas located
3347 beyond the 4GB border, like SoC peripherals (EBC etc.).
3349 Signed-off-by: Stefan Roese <sr@denx.de>
3351 commit c3307fa186af85771924c434997089b8104c0a46
3352 Author: Stefan Roese <sr@denx.de>
3353 Date: Tue Feb 19 21:58:25 2008 +0100
3355 ppc4xx: miiphy.c reworked
3357 While adding the 460EX/GT support I reworked the 4xx miiphy code. It
3358 badly neede some cleanup.
3360 Signed-off-by: Stefan Roese <sr@denx.de>
3362 commit 88aff62df39c0756241ea9f9b5a7b3ade26cb82b
3363 Author: Stefan Roese <sr@denx.de>
3364 Date: Tue Feb 19 16:21:49 2008 +0100
3366 rtc: Add M41T62 support
3368 This patch add support for the STM M41T62 RTC. It is used and tested
3369 on the AMCC Canyonlands 406EX platform.
3371 Signed-off-by: Stefan Roese <sr@denx.de>
3373 commit 217d383e201adc7f2271145ae345ea5eae2b7170
3374 Author: Niklaus Giger <niklaus.giger@netstal.com>
3375 Date: Mon Feb 25 18:46:43 2008 +0100
3377 ppc4xx: Add 405GPr based MCU25 board specific files
3379 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
3381 commit 75a66dcdb383863ad33f0534cfc27b7a86947dad
3382 Author: Niklaus Giger <niklaus.giger@netstal.com>
3383 Date: Mon Feb 25 18:46:42 2008 +0100
3385 ppc4xx: Add 405GPr based MCU25 board config file
3387 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
3389 commit b05f35436b733a240559e77e46bed8439665ecc5
3390 Author: Niklaus Giger <niklaus.giger@netstal.com>
3391 Date: Mon Feb 25 18:46:41 2008 +0100
3393 ppc4xx: Add 405GPr based MCU25 board. Global files
3395 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
3397 commit 14c27b35ac812a71abce6e3e2f4129d5e9313660
3398 Author: Niklaus Giger <niklaus.giger@netstal.com>
3399 Date: Mon Feb 25 18:37:02 2008 +0100
3401 ppc4xx: HCU4/5. remove obsolete hcu_flash.c
3403 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
3405 commit a079494853cc2bfeddb26673219db0b4b2b31566
3406 Author: Niklaus Giger <niklaus.giger@netstal.com>
3407 Date: Mon Feb 25 18:37:01 2008 +0100
3409 ppc4xx: HCU4/5. Use FLASH_CFI_LEGACY
3411 Cleanup: Remove custom flash driver for 8 bit boot-eprom and replace it with
3412 the FLASH_CFI_LEGACY et al. config options.
3414 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
3416 commit e4170e5a50c8110f792bc37472833ae669d69951
3417 Author: Stefan Roese <sr@denx.de>
3418 Date: Tue Mar 11 13:52:25 2008 +0100
3420 ppc4xx: Fix comment in 405EX DDR2 init code
3422 Signed-off-by: Stefan Roese <sr@denx.de>
3424 commit 766529fccc860ecb9e955b4239dff69cd9e4ea09
3425 Author: Bartlomiej Sieka <tur@semihalf.com>
3426 Date: Fri Mar 14 16:22:34 2008 +0100
3428 Add MD5 support to the new uImage format
3430 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
3432 commit 0ede0c383530a418cf98be9122371a86573cd0db
3433 Author: Bartlomiej Sieka <tur@semihalf.com>
3434 Date: Fri Mar 14 16:22:34 2008 +0100
3436 Add the MD5 algorithm
3438 MD5 supoprt is turned on by defining CONFIG_MD5, the digest can be then
3439 calculated using the md5() function -- see include/md5.h for details.
3441 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
3443 commit b8aa57b5d4d69e8f0810a5e632c0ce41c0f46ee0
3444 Author: Wolfgang Denk <wd@denx.de>
3445 Date: Fri Mar 14 16:04:54 2008 +0100
3447 tools/setlocalversion: use a git-describe-ish format
3449 Change the automatic local version to have the form -nnnnn-gSHA1SUMID,
3450 where 'nnnnn' is the number of commits since the last tag (i.e.,
3451 1.3.2-rc3). This makes it much easier to recognize "newer" versions
3452 and to see how much has been changed since the referenced tag.
3454 Stolen from Linux kernel's scripts/setlocalversio, see commit d882421f.
3456 Signed-off-by: Wolfgang Denk <wd@denx.de>
3458 commit c6dc21c84de0f159a1752c5ebd33cff843f63609
3459 Author: Wolfgang Denk <wd@denx.de>
3460 Date: Thu Mar 13 14:32:03 2008 +0100
3462 HMI1001: add support for MPC5200 Rev. B processors.
3464 Signed-off-by: Wolfgang Denk <wd@denx.de>
3466 commit 90f13dce7a7a9a84d5730576c9a24d0dbb07cb3a
3467 Author: Wolfgang Denk <wd@denx.de>
3468 Date: Thu Mar 13 14:29:49 2008 +0100
3470 TQM5200: remove dead code
3472 This board never used a MGT5100 processor.
3474 Signed-off-by: Wolfgang Denk <wd@denx.de>
3476 commit afe45c87e3c5d77bad76b1a57dccd20764d45b5d
3477 Author: Marian Balakowicz <m8@semihalf.com>
3478 Date: Wed Mar 12 12:14:15 2008 +0100
3480 [new uImage] Fix build issue on ARM
3482 ARM platforms don't have a bd->bi_memsize so use bd->bi_dram[0].size instead.
3484 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3486 commit 3310c549a73a949430bfda90876df7552a1dab0c
3487 Author: Marian Balakowicz <m8@semihalf.com>
3488 Date: Wed Mar 12 12:13:13 2008 +0100
3490 [new uImage] Add new uImage format documentation and examples
3492 Create doc/uImage.FIT documentation directory with the following files:
3493 - command_syntax_extensions.txt : extended command syntax description
3494 - howto.txt : short usage howto
3495 - source_file_format.txt : internal new uImage format description
3497 Add example image source files:
3502 Update README appropriately.
3504 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
3505 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
3507 commit 1ec73761d2e247078f4520a265d463e8b73391a2
3508 Author: Marian Balakowicz <m8@semihalf.com>
3509 Date: Wed Mar 12 10:35:52 2008 +0100
3511 [new uImage] Fix definition of common bootm_headers_t fields
3513 verify, autostart and lmb fields are used regardless of CONFIG_FIT
3514 setting, move their definitions to common section.
3516 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
3518 commit 1d1cb4270edc6a99276834064069717f9782c491
3519 Author: Marian Balakowicz <m8@semihalf.com>
3520 Date: Wed Mar 12 10:35:51 2008 +0100
3522 [new uImage] Fix build problems on trab board
3524 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
3526 commit f773bea8e11f4a11c388dcee956b2444203e6b65
3527 Author: Marian Balakowicz <m8@semihalf.com>
3528 Date: Wed Mar 12 10:35:46 2008 +0100
3530 [new uImage] Add proper ramdisk/FDT handling when FIT configuration is used
3532 Save FIT configuration provied in the first bootm argument and use it
3533 when to get ramdisk/FDT subimages when second and third (ramdisk/FDT)
3534 arguments are not specified.
3536 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
3538 commit 2682ce8a4225f23d72bb7fed069e928dd39d34ae
3539 Author: Marian Balakowicz <m8@semihalf.com>
3540 Date: Wed Mar 12 10:33:01 2008 +0100
3542 [new uImage] More verbose kernel image uncompress error message
3544 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
3546 commit 1372cce2b9040fb640e5032b84e3a033a22d6ff0
3547 Author: Marian Balakowicz <m8@semihalf.com>
3548 Date: Wed Mar 12 10:33:01 2008 +0100
3550 [new uImage] Use show_boot_progress() for new uImage format
3552 This patch allocates a set of show_boot_progress() IDs for new uImage format
3553 and adds show_boot_progress() calls in new uImage format handling code.
3555 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
3557 commit c28c4d193dbfb20b2dd3a5447640fd6de7fd0720
3558 Author: Marian Balakowicz <m8@semihalf.com>
3559 Date: Wed Mar 12 10:33:01 2008 +0100
3561 [new uImage] Add new uImage fromat support to fpga command
3563 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
3565 commit 09475f7527460e426c0e0628fc5b8f3754fbaa23
3566 Author: Marian Balakowicz <m8@semihalf.com>
3567 Date: Wed Mar 12 10:33:01 2008 +0100
3569 [new uImage] Add new uImage format handling to other bootm related commands
3575 diskboot - cmd_ide.c
3577 scsiboot - cmd_scsi.c
3580 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
3582 commit 1b7897f28d49a80d78d760ec6f6f11dc0f914338
3583 Author: Marian Balakowicz <m8@semihalf.com>
3584 Date: Wed Mar 12 10:33:00 2008 +0100
3586 [new uImage] Add new uImage format support to imgextract command
3588 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
3590 commit 424c4abdd175d2c470510df8ce0e32d3f463ec16
3591 Author: Marian Balakowicz <m8@semihalf.com>
3592 Date: Wed Mar 12 10:33:00 2008 +0100
3594 [new uImage] Add new uImage format support to autoscript routine
3596 autoscript() routine is updated to accept second argument, which
3597 is only used for FIT images and provides a FIT subimage unit name.
3599 autoscript() routine callers must now pass two arguments. For
3600 non-interactive use (like in cmd_load.c, cmd_net.c), new environment
3601 variable 'autoscript_uname' is introduced and used as a FIT
3602 subimage unit name source.
3604 autoscript command accepts extended syntax of the addr argument:
3607 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
3609 commit cd7c596e9f561dbbc17b717277438aee78cde14f
3610 Author: Marian Balakowicz <m8@semihalf.com>
3611 Date: Wed Mar 12 10:33:00 2008 +0100
3613 [new uImage] Add new uImage format support to arch specific do_bootm_linux() routines
3615 This patch updates architecture specific implementations of
3616 do_bootm_linux() adding new uImage format handling for
3617 operations like get kernel entry point address, get kernel
3618 image data start address.
3620 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
3622 commit 3dfe110149311425919e6d6a14b561b4207498f1
3623 Author: Marian Balakowicz <m8@semihalf.com>
3624 Date: Wed Mar 12 10:32:59 2008 +0100
3626 [new uImage] Add node offsets for FIT images listed in struct bootm_headers
3628 This patch adds new node offset fields to struct bootm_headers
3629 and updates bootm_headers processing code to make use of them.
3630 Saved node offsets allow to avoid repeating fit_image_get_node() calls.
3632 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
3634 commit bc8ed486b125452ba3bd8344f052f437329150c5
3635 Author: Marian Balakowicz <m8@semihalf.com>
3636 Date: Wed Mar 12 10:32:53 2008 +0100
3638 [new uImage] ppc: Add new uImage format support to FDT handling routines
3640 Support for new (FIT) format uImages is added to powerpc specific
3641 boot_get_fdt() routine which now recognizes, sanity checks FIT image
3642 and is able to access data sections of the requested component image.
3644 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
3646 commit a44a269a905f924b420020506a4d7d7eedcc0eaf
3647 Author: Marian Balakowicz <m8@semihalf.com>
3648 Date: Wed Mar 12 10:14:57 2008 +0100
3650 [new uImage] Re-enable interrupts for non automatic booting
3652 Re-enable interrupts if we return from do_bootm_<os> and 'autostart'
3653 environment variable is not set to 'yes'.
3655 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
3657 commit d985c8498c4e47095820da97aa722381d39172c5
3658 Author: Marian Balakowicz <m8@semihalf.com>
3659 Date: Wed Mar 12 10:14:38 2008 +0100
3661 [new uImage] Remove unnecessary arguments passed to ramdisk routines
3663 boot_get_ramdisk() and image_get_ramdisk() do not need all
3664 cmdtp, flag, argc and argv arguments. Simplify routines definition.
3666 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
3668 commit c87796483bc7c2900470dc747c367f602577608d
3669 Author: Marian Balakowicz <m8@semihalf.com>
3670 Date: Wed Mar 12 10:12:37 2008 +0100
3672 [new uImage] Add new uImage format support for ramdisk handling
3674 This patch updates boot_get_ramdisk() routine adding format
3675 verification and handling for new (FIT) uImages.
3677 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
3679 commit 6986a385671749ecb3f60cf99e9cbae8e47bb50e
3680 Author: Marian Balakowicz <m8@semihalf.com>
3681 Date: Wed Mar 12 10:01:05 2008 +0100
3683 [new uImage] Add new uImage format support for kernel booting
3685 New format uImages are recognized by the bootm command,
3686 validity of specified kernel component image is checked and
3687 its data section located and used for further processing
3688 (uncompress, load, etc.)
3690 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
3692 commit e32fea6adb620ecf2bd70acf2dd37e53df9d1547
3693 Author: Marian Balakowicz <m8@semihalf.com>
3694 Date: Tue Mar 11 12:35:20 2008 +0100
3696 [new uImage] Add new uImage format support for imls and iminfo commands
3698 imls and iminfo can now recognize nad print out contents of the new (FIT)
3701 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
3703 commit 9d25438fe7d70cf35a8a293ea5e392fefc672613
3704 Author: Bartlomiej Sieka <tur@semihalf.com>
3705 Date: Tue Mar 11 12:34:47 2008 +0100
3707 [new uImage] Add support for new uImage format to mkimage tool
3709 Support for the new uImage format (FIT) is added to mkimage tool.
3710 Commandline syntax is appropriately extended:
3712 mkimage [-D dtc_options] -f fit-image.its fit-image
3714 mkimage (together with dtc) takes fit-image.its and referenced therein
3715 binaries (like vmlinux.bin.gz) as inputs, and produces fit-image file -- the
3716 final image that can be transferred to the target (e.g., via tftp) and then
3717 booted using the bootm command in U-Boot.
3719 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
3721 commit eb6175edd6c120d8b89678243e5a2be362ee8e40
3722 Author: Marian Balakowicz <m8@semihalf.com>
3723 Date: Mon Mar 10 17:53:49 2008 +0100
3725 [new uImage] Make node unit names const in struct bootm_headers
3727 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
3729 commit 5dfb52138688ccbf0146f62683fe6217b3ce1b05
3730 Author: Marian Balakowicz <m8@semihalf.com>
3731 Date: Fri Feb 29 21:24:06 2008 +0100
3733 [new uImage] New uImage low-level API
3735 Add FDT-based functions for handling new format component images,
3736 configurations, node operations, property get/set, etc.
3738 fit_ - routines handling global new format uImage operations
3739 like get/set top level property, process all nodes, etc.
3740 fit_image_ - routines handling component images subnodes
3741 fit_conf_ - routines handling configurations node
3743 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
3744 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
3746 commit 30f1806f60978d707b0cff2d7bf89d141fc24290
3747 Author: Wolfgang Denk <wd@denx.de>
3748 Date: Sun Mar 9 16:20:02 2008 +0100
3752 Update CHANGELOG for release.
3754 Signed-off-by: Wolfgang Denk <wd@denx.de>
3756 commit 5b464c289ba715d0979b6e1f94947bb8f1068d16
3757 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3758 Date: Sun Mar 9 14:52:11 2008 +0100
3760 SCM: fix 'packed' attribute ignored for field of type 'can_msg_t' warnings
3762 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3763 Signed-off-by: Wolfgang Denk <wd@denx.de>
3765 commit db695b78515ddb88a2d4f3357c120345efbf59ec
3766 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3767 Date: Sun Mar 9 10:44:01 2008 +0100
3769 scb9328: Fix flash warning: type qualifiers ignored on function return type
3771 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3773 commit 2b3e7e61d6a72f16aee93f870bc6af67f30758c4
3774 Author: Wolfgang Denk <wd@denx.de>
3775 Date: Sun Mar 9 10:50:41 2008 +0100
3777 esd/common/fpga.c: fix indentation.
3779 Signed-off-by: Wolfgang Denk <wd@denx.de>
3781 commit cc3843e36453e2b8db65d7e56de938ba045016a0
3782 Author: Wolfgang Denk <wd@denx.de>
3783 Date: Sun Mar 9 10:33:31 2008 +0100
3785 common/kgdb.c: fix 'dereferencing type-punned pointer' warning
3787 and get rid of a couple of unneeded casts.
3789 Signed-off-by: Wolfgang Denk <wd@denx.de>
3791 commit 8d4f4a838d7dc7cf4de17e3e9a67e2f222b6a1c8
3792 Author: Wolfgang Denk <wd@denx.de>
3793 Date: Sun Mar 9 10:09:53 2008 +0100
3795 esd/common/fpga.c: fix 'assignment of read-only location' error
3797 Signed-off-by: Wolfgang Denk <wd@denx.de>
3799 commit c6fe4dabac066e8758345d249032768496983a3e
3800 Author: Wolfgang Denk <wd@denx.de>
3801 Date: Sun Mar 9 02:13:19 2008 +0100
3803 Makefile: make build silently again.
3805 Signed-off-by: Wolfgang Denk <wd@denx.de>
3807 commit 76babc86576f092573599334c85ec543fdbc6015
3808 Author: Wolfgang Denk <wd@denx.de>
3809 Date: Sun Mar 9 02:07:49 2008 +0100
3811 m501sk: Fix out of tree building
3813 Signed-off-by: Wolfgang Denk <wd@denx.de>
3815 commit 210ed2004e062fdd03f25ab4925998aa1bd08a07
3816 Author: Wolfgang Denk <wd@denx.de>
3817 Date: Sun Mar 9 00:06:09 2008 +0100
3819 ADS5121: fix out of tree build
3821 and simplify Makefile a bit.
3823 Signed-off-by: Wolfgang Denk <wd@denx.de>
3825 commit 46cb5074a3f74de64ebd97dd0c4ec7eb3d768b93
3826 Author: Wolfgang Denk <wd@denx.de>
3827 Date: Sat Mar 8 22:35:31 2008 +0100
3831 Signed-off-by: Wolfgang Denk <wd@denx.de>
3833 commit 78a90f827df74520e939c794fc7413dace21c4db
3834 Author: Wolfgang Denk <wd@denx.de>
3835 Date: Sat Mar 8 22:35:04 2008 +0100
3839 Signed-off-by: Wolfgang Denk <wd@denx.de>
3841 commit 58f3c57c6008b42e01f551d3be6efd88c14ac87f
3842 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3843 Date: Sat Mar 8 21:30:04 2008 +0100
3845 esd: Fix warning: passing argument 1 of 'fpga_boot' discards qualifiers from pointer target type
3847 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3849 commit d75469d48c05795144f4b8ba76addbb4920a7bba
3850 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3851 Date: Sat Mar 8 09:25:49 2008 +0900
3853 net: rtl8169: Add processing when OWNbit did't enable in rtl_recv()
3855 When rtl_recv() of rtl8169 is called, OWNbit of status register
3856 is not enable occasionally.
3857 rtl_recv() doesn't work normally when the driver doesn't do
3858 appropriate processing.
3859 This patch fix this problem.
3861 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3863 commit 82afabfeb8ae6a27c7b396011ea99f4712aa73fa
3864 Author: Heiko Schocher <hs@denx.de>
3865 Date: Fri Mar 7 08:15:28 2008 +0100
3867 mgsuvd: update board configuration
3869 initialize the UPIOx controller.
3871 Signed-off-by: Heiko Schocher <hs@denx.de>
3873 commit e492c90c26215e459aec0fdf0f8ef1fd204988f5
3874 Author: Heiko Schocher <hs@denx.de>
3875 Date: Fri Mar 7 08:13:41 2008 +0100
3877 mgcoge: update board configuration
3879 add support for the config Flash.
3880 initialize the UPIOx controller.
3882 Signed-off-by: Heiko Schocher <hs@denx.de>
3884 commit 270fe261b7f9292800b2b3d1bf19ae7cbc880258
3885 Author: Kim Phillips <kim.phillips@freescale.com>
3886 Date: Fri Mar 7 12:27:31 2008 -0600
3888 mpc83xx: make dtb basename file references equal those of linux
3890 the dts file basenames were updated in linux - this helps avoid
3891 inadvertently loading any old dtbs laying around.
3893 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3895 commit f30b6154f16f5ffa4a9f5bfca5e114d72b6ef675
3896 Author: Kim Phillips <kim.phillips@freescale.com>
3897 Date: Wed Feb 27 16:08:22 2008 -0600
3899 net: uec_phy: actually increment the timeout counter
3901 allow u-boot to recover (and, e.g., switch to another interface) in the
3902 case where a PHY does not report autonegotiation is complete within its
3903 two second timeout value.
3905 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3907 commit 772003e43957ee0c895abed7cd82cbe72820cbb8
3908 Author: Markus Brunner <super.firetwister@googlemail.com>
3909 Date: Wed Mar 5 21:38:12 2008 +0100
3911 fix taihu soft spi_read
3913 The taihu board used gpio_read_out_bit which reads the output register and not
3916 Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
3918 commit fc84a8495ac750f6b4adae81f8c4f100f65b6340
3919 Author: Stefan Roese <sr@denx.de>
3920 Date: Fri Mar 7 08:01:43 2008 +0100
3922 ppc4xx: Sequoia: Add device tree (fdt) Linux booting default env variables
3924 Signed-off-by: Stefan Roese <sr@denx.de>
3926 commit bd4458cb47abecabd406b1210457be96c69fc49d
3927 Author: Dave Liu <r63238@freescale.com>
3928 Date: Tue Mar 4 16:59:22 2008 +0800
3930 837xEMDS: Improve the system performance
3932 1. Make the CSB bus pipeline depth as 4, and enable
3934 2. Raise the eTSEC emergency priority;
3935 3. Use the highest IP blocks clock.
3937 Signed-off-by: Dave Liu <daveliu@freescale.com>
3939 commit d8ab58b212481b1c57947ea21aa96c4ce800d0b4
3940 Author: Detlev Zundel <dzu@denx.de>
3941 Date: Thu Mar 6 16:45:53 2008 +0100
3943 Replace "run load; run update" with conditionalized "run load update".
3945 The latter version stops when "run load" fails for whatever reasons
3946 rendering the combination *a lot* more secure.
3948 Signed-off-by: Detlev Zundel <dzu@denx.de>
3950 commit 6bc113886d7d316df1a4e459bec8baf027518551
3951 Author: Stefan Roese <sr@denx.de>
3952 Date: Tue Mar 4 17:40:41 2008 +0100
3954 net: Print error message upon net usage when no ethernet-interface is found
3956 This patch fixes a problem seen on PPC4xx boards, when no MAC address is
3957 defined. Then no ethernet interface is available but a simple "tftp"
3958 command will return without any error message which is quite confusing.
3960 Signed-off-by: Stefan Roese <sr@denx.de>
3962 commit a30a549a3553032d809e0356306b62de0b125901
3963 Author: Jon Loeliger <jdl@freescale.com>
3964 Date: Tue Mar 4 10:03:03 2008 -0600
3966 Remove erroneous or extra spd.h #includers.
3968 Many of the spd.h #includers don't need it,
3969 and wanted to have spd_sdram() declared instead.
3970 Since they didn't get that, some also had open
3971 coded extern declarations of it instead or as well.
3972 Fix it all up by using spd_sdram.h where needed.
3974 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3976 commit a4475386cef14af3fd88f0518b688e755669486d
3977 Author: Wolfgang Denk <wd@denx.de>
3978 Date: Tue Mar 4 17:41:28 2008 +0100
3980 PCS440EP: fix build problems (redundant #define)
3982 Signed-off-by: Wolfgang Denk <wd@denx.de>
3984 commit e85e2fa85ec09a6fac2846d1d881d8737e2bbda9
3985 Author: Stefan Roese <sr@denx.de>
3986 Date: Tue Mar 4 17:39:25 2008 +0100
3988 net: Print error message upon net usage when no ethernet-interface is found
3990 This patch fixes a problem seen on PPC4xx boards, when no MAC address is
3991 defined. Then no ethernet interface is available but a simple "tftp"
3992 command will return without any error message which is quite confusing.
3994 Signed-off-by: Stefan Roese <sr@denx.de>
3996 commit 384faaafb999cae3ce447c93e28a0b7e2e5fef53
3997 Author: Wolfgang Denk <wd@denx.de>
3998 Date: Tue Mar 4 17:38:50 2008 +0100
4000 W7OLMC/W7OLMG: fix build problems (redundant #define)
4002 Signed-off-by: Wolfgang Denk <wd@denx.de>
4004 commit f9301e1cda296245ba052d7b08321199c3d0af9d
4005 Author: Wolfgang Denk <wd@denx.de>
4006 Date: Tue Mar 4 14:58:31 2008 +0100
4008 Makefile: fix problem with out-of-tree builds introduced by 5013c09f
4010 Commit 5013c09f (Makefile: cleanup "clean" target) introduced a
4011 problem for out-of-tree builds which caused "make clean" to fail.
4013 Signed-off-by: Wolfgang Denk <wd@denx.de>
4015 commit dfece9500556bed5d8244b1c15d973cec7c25bfe
4016 Author: Wolfgang Denk <wd@denx.de>
4017 Date: Tue Mar 4 11:58:26 2008 +0100
4019 examples/Makefile: build "hello_world" on 8xx, too.
4021 Signed-off-by: Wolfgang Denk <wd@denx.de>
4023 commit 74eb0222594fd23aafdf168e60e872814eea8b62
4024 Author: Mike Nuss <mike@terascala.com>
4025 Date: Mon Mar 3 15:27:05 2008 -0500
4027 PPC4xx (Sequoia): Fix Ethernet "remote fault" problems
4029 Every now and then a Sequoia board (or equivalent hardware) had
4030 problems connecting to a Gigabit capable network interface.
4032 There were differences in the PHY setup between Linux and U-Boot.
4034 This patch fixes the problem. Apparently "remote fault" is being set,
4035 which signals to some devices (on the other end of the cable) that a
4036 fault has occurred, while other devices ignore it. I believe the RF bit
4037 was causing the issue, but I removed T4 also, to match up with Linux.
4039 Signed-off-by: Mike Nuss <mike@terascala.com>
4041 commit 491fb6dea9f52fdb9cb5996e8e978b9e9685179f
4042 Author: Timur Tabi <timur@freescale.com>
4043 Date: Mon Mar 3 09:58:52 2008 -0600
4045 fix QE firmware uploading limit
4047 Fix a typo in qe_upload_firmware() that prevented uploading firmware on
4048 systems with more than one RISC core.
4050 Signed-off-by: Timur Tabi <timur@freescale.com>
4052 commit 42ba58e0c302b339a3c2faa6006a013c6f186b7a
4053 Author: Bernhard Nemec <bnemec@ganssloser.com>
4054 Date: Mon Mar 3 11:57:23 2008 +0000
4056 Fix endianess problem in cramfs code (cramfs is always host-endian in Linux)
4058 Originally pointed out by Laurent Pinchart <laurent.pinchart@tbox.biz>,
4059 see http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/22846
4061 Signed-off-by: Bernhard Nemec <bnemec <at> ganssloser.com>
4063 commit 84d0c2f1e39caff58bf765a7ab7c72da23c25ec8
4064 Author: Kim B. Heino <Kim.Heino@bluegiga.com>
4065 Date: Mon Mar 3 10:39:13 2008 +0200
4067 fix copy from ram to dataflash
4069 If I try to "cp.b <ram> <dataflash>", u-boot selects normal flash
4070 routines instead of dataflash. This is because it checks "if source
4071 address is not dataflash" instead of target address.
4073 Signed-off-by: Kim B. Heino <Kim.Heino@bluegiga.com>
4075 commit 32bf3d143a888f8deacfdcc97e898f6c06d0aea4
4076 Author: Wolfgang Denk <wd@denx.de>
4077 Date: Mon Mar 3 12:16:44 2008 +0100
4079 Fix quoting problem (preboot setting) in many board config files.
4081 Signed-off-by: Wolfgang Denk <wd@denx.de>
4083 commit 5b0b2b6fc9fe22e3864c2a57316d91a2507ec215
4084 Author: Wolfgang Denk <wd@denx.de>
4085 Date: Mon Mar 3 12:36:49 2008 +0100
4087 ADS5121: Fix default environment.
4089 Signed-off-by: Wolfgang Denk <wd@denx.de>
4091 commit 91c82076ae492bb1f9d9c47a481314631d32dc8e
4092 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4093 Date: Sun Mar 2 16:12:31 2008 +0100
4095 Makefile: Fix missing unconfig and mkconfig use
4097 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4099 commit 8ce4e5c2c02cb7e8adddf7b651d3050d81ce4c1d
4100 Author: michael <trimarchi@gandalf.sssup.it>
4101 Date: Sun Mar 2 23:33:46 2008 +0100
4103 Fix checking fat32 cluster size.
4105 This fixes the cluster size tests in the FAT32 file system.
4106 The current implementation of VFAT support doesn't work if the
4107 referred cluster has an offset > 16bit representation, causing
4108 "fatload" and "fatls" commands etc. to fail.
4110 Signed-off-by: michael trimarchi <trimarchi@gandalf.sssup.it>
4112 commit 661bad63a076a96c39c64f136915f146725af92b
4113 Author: Wolfgang Denk <wd@denx.de>
4114 Date: Sun Mar 2 22:57:23 2008 +0100
4116 Prepare v1.3.2-rc2 release candidate
4118 Signed-off-by: Wolfgang Denk <wd@denx.de>
4120 commit 76957cb3d621bf664311908e5962e151c633c285
4121 Author: Stefan Roese <sr@denx.de>
4122 Date: Sat Mar 1 12:11:40 2008 +0100
4124 ppc4xx: EMAC: Fix 405EZ fifo size setup in EMAC_MR1
4126 The 405EZ only supports 512 bytes of rx-/tx-fifo EMAC sizes. But
4127 currently 4k/2k is configured. This patch fixes this issue.
4129 Thanks to Thomas Kindler <tkindler@lenord.de> for pointing this out.
4131 Signed-off-by: Stefan Roese <sr@denx.de>
4133 commit 118978c8eb43803e2794233922df4249fa278b83
4134 Author: Woodruff, Richard <r-woodruff2@ti.com>
4135 Date: Fri Feb 29 17:34:35 2008 -0600
4137 Fix alignment error on ARM for modules
4139 Fix alignment fault on ARM when running modules. With out an explicit
4140 linker file gcc4.2.1 will half word align __bss_start's value. The word
4141 dereference will crash hello_world.
4143 signed-off-by Richard Woodruff <r-woodruff2@ti.com>
4145 commit ce1120dd703e6f12c59e4eba9962356a0300b832
4146 Author: Dave Liu <r63238@freescale.com>
4147 Date: Fri Feb 29 17:45:31 2008 +0800
4149 fs: Fix ext2 read issue
4151 The ext2 aligned process will corrupt the key
4152 data struct, the patch fix this.
4154 Signed-off-by: Dave Liu <daveliu@freescale.com>
4156 commit 5013c09f7a5675952a3ca88b6bc6c924e63af33e
4157 Author: Wolfgang Denk <wd@denx.de>
4158 Date: Sun Mar 2 22:45:33 2008 +0100
4160 Makefile: cleanup "clean" target
4162 Make sure CDPATH settings cannot interfere.
4165 Signed-off-by: Wolfgang Denk <wd@denx.de>
4167 commit ffda586fc1373243c9794babde69500f6293a8d8
4168 Author: Li Yang <leoli@freescale.com>
4169 Date: Fri Feb 29 11:46:05 2008 +0800
4171 add cscope build target
4173 Add cscope build target to generate cscope database for code browsing.
4175 Signed-off-by: Li Yang <leoli@freescale.com>
4177 commit f655adef65e4cf6b929054b049ee19ae9b5ccbe2
4178 Author: Kim Phillips <kim.phillips@freescale.com>
4179 Date: Wed Feb 27 15:06:39 2008 -0600
4181 net: uec_phy: handle 88e1111 rev.B2 erratum 5.6
4183 erratum 5.6 states the autoneg completion bit is functional only if the
4184 autoneg bit is asserted.
4186 This fixes any secondarily-issued networking commands on non-gigabit
4187 links on the mpc8360 mds board.
4189 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4191 commit 5f91db7f582ca17b1f19f10189c025696f333d2e
4192 Author: John Rigby <jrigby@freescale.com>
4193 Date: Tue Feb 26 09:38:14 2008 -0700
4195 MPC5121e ADS PCI support take 3
4197 Adds PCI support for MPC5121
4199 Tested with drivers/net/rtl8139.c
4201 Support is conditional since PCI on old silicon does not work.
4203 ads5121_PCI_config turns on PCI
4205 In this version, condition compilation of PCI code has been moved
4206 from ifdef in board/ads5121/pci.c to board/ads5121/Makefile as
4207 suggested by Jean-Christophe PLAGNIOL-VILLARD
4209 Signed-off-by: John Rigby <jrigby@freescale.com>
4211 commit 44b4dbed4133f657705b7c5193209da9978243a7
4212 Author: Anatolij Gustschin <agust@denx.de>
4213 Date: Mon Feb 25 23:53:07 2008 +0100
4215 Fix warnings while compilation of post/drivers/memory.c
4217 Fix warnings while compilation with new gcc in eldk-4.2
4219 Signed-off-by: Anatolij Gustschin <agust@denx.de>
4221 commit 4fae35a53b3e958254d6574a1cc7e10811fc6726
4222 Author: Anatolij Gustschin <agust@denx.de>
4223 Date: Mon Feb 25 20:54:04 2008 +0100
4225 ppc4xx: Fix problem in 4xx_enet.c driver
4227 U-Boot crashes in the net loop if CONFIG_4xx_DCACHE is
4228 enabled. To reproduce the problem ensure that 'ethrotate'
4229 environment variable isn't set to "no" and then run
4230 "tftp 200000 not_existent_file".
4231 This patch tries to fix the issue.
4233 Signed-off-by: Anatolij Gustschin <agust@denx.de>
4235 commit 60ec654c5eb80d0fe0c38a3bd42140215bc06484
4236 Author: Anatolij Gustschin <agust@denx.de>
4237 Date: Mon Feb 25 20:04:20 2008 +0100
4239 POST: Disable cache while SPR POST
4241 Currently (since commit b2e2142c) u-boot crashes on
4242 sequoia board while SPR test if CONFIG_4xx_DCACHE is
4243 enabled. This patch disables the cache while SPR test.
4245 Signed-off-by: Anatolij Gustschin <agust@denx.de>
4247 commit c313b2c6c555e7d89ec59bd51c59ab164ad0105d
4248 Author: Martin Krause <martin.krause@tqs.de>
4249 Date: Mon Feb 25 17:52:40 2008 +0100
4251 TQM5200: use automatic fdt memory fixup (part 2)
4253 Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S,
4254 TB5200 and TB5200_B to fixup the /memory node with the memory values
4257 Signed-off-by: Martin Krause <martin.krause@tqs.de>
4259 commit 44ceec253ea941b301abf4b079d52324def69d92
4260 Author: Martin Krause <martin.krause@tqs.de>
4261 Date: Mon Feb 25 15:17:05 2008 +0100
4263 TQM5200: use automatic fdt memory fixup
4265 Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S,
4266 TB5200 and TB5200_B to fixup the /memory node with the memory values
4269 Signed-off-by: Martin Krause <martin.krause@tqs.de>
4271 commit f3a329acb26017d8e10e9c93e1e726c2a5ac634a
4272 Author: Martin Krause <martin.krause@tqs.de>
4273 Date: Mon Feb 25 13:27:52 2008 +0100
4275 TQM5200: fix bug in SDRAM initialization code
4277 This patch fixes a bug in the SDRAM initialization code for the
4278 TQM5200. The hi_addr bit is now set correctly. Without this patch
4279 the hi_addr bit is always set to 1, if the second SDRAM bank is
4282 For other MPC5200 boards a correspondig patch has already been applied
4283 some time ago, see commit a63109281ad41b0fb489fdcb901171f76bcdbc2c.
4285 Signed-off-by: Martin Krause <martin.krause@tqs.de>
4287 Forget the first patch please. I confused flash with SDRAM in
4290 commit 217bf6b6a313d9ccb619a4dbc09f73f77cd48df1
4291 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4292 Date: Mon Feb 25 00:03:12 2008 +0100
4294 mx1fs2/flash: Fix multiple compiler warnings
4296 "pointer targets in assignment differ in signedness"
4298 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4300 commit 5599c28cef55be42a8ca6fa8086b1a44e56a85d2
4301 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4302 Date: Mon Feb 25 00:03:11 2008 +0100
4304 arm-imx: Fix register definitions
4306 Sync register definitions with linux
4308 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4310 commit c9bcf75fecc58886af77d2a571cff2eab39eab6f
4311 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4312 Date: Mon Feb 25 00:03:10 2008 +0100
4314 actua1/actua2/actua3: Fix multiple unused variable warnings
4317 actux1.c: In function 'checkboard':
4318 actux1.c:92: warning: unused variable 'revision'
4321 actux2.c: In function 'checkboard':
4322 actux2.c:100: warning: unused variable 's'
4323 actux2.c:99: warning: unused variable 'revision'
4324 actux2.c: In function 'reset_phy':
4325 actux2.c:130: warning: unused variable 'i'
4328 actux3.c: In function 'checkboard':
4329 actux3.c:114: warning: unused variable 'revision'
4331 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4333 commit f8fa6368a6a0c02164da8e2f52f18d457c6977bd
4334 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4335 Date: Sun Feb 24 11:44:29 2008 +0900
4337 Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets.
4339 The previous patch was lacking of i386, microblaze, nios and nios2. This
4340 patch tries to fix them.
4342 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4344 commit 05e07b1ea22844e946cfcf7d5e8a0199d18d2a95
4345 Author: Marian Balakowicz <m8@semihalf.com>
4346 Date: Fri Feb 29 22:22:46 2008 +0100
4348 [new uImage] Fix FDT blob totalsize calculation in boot_relocate_fdt()
4350 Do not use global fdt blob pointer, calculate blob size from routine
4351 argument blob pointer.
4353 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
4355 commit d1cc52879c8966507dad9fb575481e6d3985e64e
4356 Author: David Gibson <david@gibson.dropbear.id.au>
4357 Date: Tue Feb 12 00:58:31 2008 +1100
4359 libfdt: Add and use a node iteration helper function.
4361 This patch adds an fdt_next_node() function which can be used to
4362 iterate through nodes of the tree while keeping track of depth. This
4363 function is used to simplify the iteration code in a lot of other
4364 functions, and is also exported for use by library users.
4366 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
4368 commit 8cf30809a82902a471866d2f07725ce3b8a22291
4369 Author: Bartlomiej Sieka <tur@semihalf.com>
4370 Date: Fri Feb 29 16:00:24 2008 +0100
4372 [new uImage] Add libfdt support to mkimage
4374 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
4376 commit a6e530f00d31a8494a0422799b2b9a692a9c0eb9
4377 Author: Bartlomiej Sieka <tur@semihalf.com>
4378 Date: Fri Feb 29 16:00:23 2008 +0100
4380 [new uImage] Add sha1.o object to mkimage binary build
4382 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
4384 commit df6f1b895c997978f03afe04502ee76b7ba34ab9
4385 Author: Marian Balakowicz <m8@semihalf.com>
4386 Date: Fri Feb 29 16:00:06 2008 +0100
4388 [new uImage] Fix component handling for legacy multi component images
4390 Use uint32_t when accessing size table in image_multi_count() and
4391 image_multi_getimg() for multi component images.
4393 Add missing uimage_to_cpu() endianness conversion.
4395 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
4397 commit 570abb0ad120f6002bcaa3cf6f32bd4ca2e1b248
4398 Author: Marian Balakowicz <m8@semihalf.com>
4399 Date: Fri Feb 29 15:59:59 2008 +0100
4401 [new uImage] Share common uImage code between mkimage and U-boot
4403 This patch adds the following common routines:
4405 1) Dedicated mkimage print_header() is replaced with common
4406 image_print_contents()
4407 image_print_contents_noindent()
4409 2) Common os/arch/type/comp fields name <--> id translation routines
4410 genimg_get_os_name()
4411 genimg_get_arch_name()
4412 genimg_get_type_name()
4413 genimg_get_comp_name()
4415 genimg_get_arch_id()
4416 genimg_get_type_id()
4417 genimg_get_comp_id()
4419 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
4421 commit 9a4daad0a35eb5143037eea9f786a3e9d672bdd6
4422 Author: Marian Balakowicz <m8@semihalf.com>
4423 Date: Fri Feb 29 14:58:34 2008 +0100
4425 [new uImage] Update naming convention for bootm/uImage related code
4427 This patch introduces the following prefix convention for the
4428 image format handling and bootm related code:
4430 genimg_ - dual format shared code
4431 image_ - legacy uImage format specific code
4432 fit_ - new uImage format specific code
4433 boot_ - booting process related code
4435 Related routines are renamed and a few pieces of code are moved around and
4438 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
4440 commit 75fa002c47171b73fb4c1f2c2fe4d6391c136276
4441 Author: Kumar Gala <galak@kernel.crashing.org>
4442 Date: Wed Feb 27 21:51:51 2008 -0600
4444 [new uImage] Respect autostart setting in linux bootm
4446 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4447 Acked-by: Marian Balakowicz <m8@semihalf.com>
4449 commit d3f2fa0d278467b2232e4eb2372f905c3febfbeb
4450 Author: Kumar Gala <galak@kernel.crashing.org>
4451 Date: Wed Feb 27 21:51:50 2008 -0600
4453 [new uImage] Provide ability to restrict region used for boot images
4455 Allow the user to set 'bootm_low' and 'bootm_size' env vars as a way
4456 to restrict what memory range is used for bootm.
4458 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4459 Acked-by: Marian Balakowicz <m8@semihalf.com>
4461 commit e822d7fc4dd4755d4d0a22f05e33f33d1a0481da
4462 Author: Kumar Gala <galak@kernel.crashing.org>
4463 Date: Wed Feb 27 21:51:49 2008 -0600
4465 [new uImage] Use lmb for bootm allocations
4467 Convert generic ramdisk_high(), get_boot_cmdline(), get_boot_kbd()
4468 functions over to using lmb for allocation of the ramdisk, command line
4471 Convert PPC specific fdt_relocate() to use lmb for allocation of the device
4474 Provided a weak function that board code can call to do additional
4475 lmb reserves if needed.
4477 Also introduce the concept of bootmap_base to specify the offset in
4478 physical memory that the bootmap is located at. This is used for
4479 allocations of the cmdline, kernel bd, and device tree as they should
4480 be contained within bootmap_base and bootmap_base + CFG_BOOTMAPSZ.
4482 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4484 commit f5614e7926863bf0225ec860d9b319741a9c4004
4485 Author: Kumar Gala <galak@kernel.crashing.org>
4486 Date: Wed Feb 27 21:51:48 2008 -0600
4488 [new uImage] Add autostart flag to bootm_headers structure
4490 The autostart env variable was dropped as part of the initial new uImage
4491 cleanup. Add it back here so the arch specific code can decide if it
4492 wants to really boot or not.
4494 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4495 Acked-by: Marian Balakowicz <m8@semihalf.com>
4497 commit 4ed6552f715983bfc7d212c1199a1f796f1144ad
4498 Author: Kumar Gala <galak@kernel.crashing.org>
4499 Date: Wed Feb 27 21:51:47 2008 -0600
4501 [new uImage] Introduce lmb from linux kernel for memory mgmt of boot images
4503 Introduce the LMB lib used on PPC in the kernel as a clean way to manage
4504 the memory spaces used by various boot images and structures. This code
4505 will allow us to simplify the code in bootm and its support functions.
4507 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4509 commit 4648c2e7a173b0d7f17bef4adaa0623090c9e904
4510 Author: Kumar Gala <galak@kernel.crashing.org>
4511 Date: Tue Feb 19 22:03:47 2008 -0600
4513 [new uImage] ppc: Allow boards to specify effective amount of memory
4515 For historical reasons we limited the stack to 256M because some boards
4516 could only map that much via BATS. However newer boards are capable of
4517 mapping more memory (for example 85xx is capable of doing up to 2G).
4519 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4520 Acked-by: Marian Balakowicz <m8@semihalf.com>
4522 commit 274cea2bddbca10cdad7daa518951b75c44ef6bc
4523 Author: Kumar Gala <galak@kernel.crashing.org>
4524 Date: Wed Feb 27 21:51:46 2008 -0600
4526 [new uImage] rework error handling so common functions don't reset
4528 Changed image_get_ramdisk() to just return NULL on error and have
4529 get_ramdisk() propogate that error to the caller. It's left to the
4530 caller to call do_reset() if it wants to.
4532 Also moved calling do_reset() in get_fdt() and fdt_relocate() on ppc
4533 to a common location. In the future we will change get_fdt() and
4534 fdt_relocate() to return success/failure and not call do_reset() at all.
4536 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4537 Acked-by: Marian Balakowicz <m8@semihalf.com>
4539 commit d2bc095a639672def11d5d043b5688d0dbd692ec
4540 Author: Kumar Gala <galak@kernel.crashing.org>
4541 Date: Wed Feb 27 21:51:45 2008 -0600
4543 [new uImage] ppc: Re-order ramdisk/fdt handling sequence
4545 Doing the fdt before the ramdisk allows us to grow the fdt w/o concern
4546 however it does mean we have to go in and fixup the initrd info since
4547 we don't know where it will be.
4549 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4551 commit 27953493ef025fb698d68c5dee39b36f01f4d530
4552 Author: Kumar Gala <galak@kernel.crashing.org>
4553 Date: Wed Feb 27 21:51:44 2008 -0600
4555 [new uImage] ppc: Determine if we are booting an OF style
4557 If we are bootin OF style than we can skip setting up some things
4558 that are used for the old boot method.
4560 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4561 Acked-by: Marian Balakowicz <m8@semihalf.com>
4563 commit a6612bdfe7ef37b9787b66800cf02aaded05fbeb
4564 Author: Kumar Gala <galak@kernel.crashing.org>
4565 Date: Wed Feb 27 21:51:43 2008 -0600
4567 [new uImage] Don't pass kdb to ramdisk_high since we may not have one
4569 We don't actually need the kdb param as we are just using it to get
4570 bd->bi_memsize which we can get from gd->bd->bi_memsize. Also, if we
4571 boot via OF we might not actually fill out a kdb.
4573 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4574 Acked-by: Marian Balakowicz <m8@semihalf.com>
4576 commit 2b22fa4baee51e6b467c44ea1be0d1ecd86e8775
4577 Author: Kumar Gala <galak@kernel.crashing.org>
4578 Date: Wed Feb 27 16:30:47 2008 -0600
4580 85xx: Don't icbi when unlocking the cache
4582 There is no reason to icbi when invalidating the temporary stack in
4583 the d-cache. Its impossible on e500 to have the i-cache contain
4584 any addresses in the temp stack and it can be problematic in generating
4585 transactions on the bus to non-valid addresses.
4587 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4589 commit 534ea6b6f86f8b75ef2ac061ef110a98f103d7d6
4590 Author: Andy Fleming <afleming@freescale.com>
4591 Date: Wed Feb 27 15:50:50 2008 -0600
4593 Fix source for ECM error IVPR
4595 The source vector for the ECM was being set to 2,
4596 but that's what the source vector for DDR was being
4597 set to. Change it to 1.
4599 Signed-off-by: Andy Fleming <afleming@freescale.com>
4601 commit 21fae8b2b4e4e6e648796e07e20ab13e9cb18923
4602 Author: Andy Fleming <afleming@freescale.com>
4603 Date: Wed Feb 27 14:29:58 2008 -0600
4605 Invalidate INIT_RAM TLB mappings
4607 Commit 0db37dc... (and some others) changed the INIT_RAM TLB
4608 mappings to be unguarded. This collided with an existing "bug"
4609 where the mappings for the INIT_RAM were being kept around.
4610 This meant that speculative loads to those addresses were
4611 succeeding in the TLB, and going out to the bus, where they
4612 were causing an exception (there's nothing at that address). The
4613 Flash code was coincidentally causing such a speculative load.
4614 Rather than go back to mapping the INIT RAM as guarded, we fix
4615 it so that the entries for the INIT_RAM are invalidated. Thus
4616 the speculative loads will fail in the TLB, and have no effect.
4618 Signed-off-by: Andy Fleming <afleming@freescale.com>
4620 commit 347b7938d3e561eb215aa386c37fb5acb5a383c6
4621 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4622 Date: Sun Feb 17 22:56:17 2008 +0100
4624 sbc8548: Fix Revision reading and unused variable 'path'
4626 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4628 commit 495d162374c472f46454453553382ad0735dc725
4629 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4630 Date: Sun Feb 17 22:56:16 2008 +0100
4632 sbc8548: Fix cfi flash bank declaration
4634 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4636 commit 4efbe9dbb129f857f27856936112c8c02f016be6
4637 Author: Marian Balakowicz <m8@semihalf.com>
4638 Date: Wed Feb 27 11:02:26 2008 +0100
4640 [new uImage] Correct raw FDT blob handlig when CONFIG_FIT is disabled
4642 Dual format image code must properly handle all three FDT passing methods:
4643 - raw FDT blob passed
4644 - FDT blob embedded in the legacy uImage
4645 - FDT blob embedded in the new uImage
4647 This patch enables proper raw FDT handling when no FIT imaeg support
4648 is compiled in. This is a bit tricky as we must dected FIT format even
4649 when FIT uImage handling is not enabled as both FIT uImages and raw FDT
4650 blobs use tha same low level format (libfdt).
4652 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
4654 commit ff0734cff0fb5397ce2f4602f4f3e5ec9c8a36e8
4655 Author: Marian Balakowicz <m8@semihalf.com>
4656 Date: Wed Feb 27 11:02:26 2008 +0100
4658 [new uImage] POWERPC: Add image_get_fdt() routine
4660 FDT blob may be passed either: (1) raw (2) or embedded in the legacy uImage
4661 (3) or embedded in the new uImage. For the (2) case embedding image must be
4662 verified before we get FDT from it. This patch factors out legacy image
4663 specific verification routine to the separate helper routine.
4665 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
4666 Acked-by: Kumar Gala <galak@kernel.crashing.org>
4668 commit 1efd43601f90de21ec6c0ebb9880823e822927b1
4669 Author: Marian Balakowicz <m8@semihalf.com>
4670 Date: Wed Feb 27 11:02:07 2008 +0100
4672 [new uImage] Add image_get_kernel() routine
4674 Legacy image specific verification is factored out to a separate helper
4675 routine to keep get_kernel() generic and simple.
4677 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
4678 Acked-by: Kumar Gala <galak@kernel.crashing.org>
4680 commit 8a5ea3e6168fe6a2780eeaf257a3b19f30dec658
4681 Author: Marian Balakowicz <m8@semihalf.com>
4682 Date: Wed Feb 27 11:01:04 2008 +0100
4684 [new uImage] Move image verify flag to bootm_headers structure
4686 Do not pass image verification flag directly to related routines.
4687 Simplify argument passing and move it to the bootm_header structure which
4688 contains curently processed image specific data and is already being passed
4689 on the argument list.
4691 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
4692 Acked-by: Kumar Gala <galak@kernel.crashing.org>
4694 commit 823afe7cefe00dafefc6696c1cc7aa828c394234
4695 Author: Marian Balakowicz <m8@semihalf.com>
4696 Date: Wed Feb 27 11:00:47 2008 +0100
4698 [Makefile] Sort COBJS in lib_<arch> Makefiles
4700 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
4702 commit 6f0f9dfc4ee880fbf400a2ebe14238181a6c3f91
4703 Author: Marian Balakowicz <m8@semihalf.com>
4704 Date: Wed Feb 27 11:00:47 2008 +0100
4706 [new uImage] Optimize gen_get_image() flow control
4708 When CONFIG_HAS_DATAFLASH is not defined gen_get_image() routine has nothing
4709 to do, update its control flow to better reflect that simple case.
4711 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
4712 Acked-by: Kumar Gala <galak@kernel.crashing.org>
4714 commit d2ced9eb19ec74f4a359949dbe353427fa6d55ca
4715 Author: Marian Balakowicz <m8@semihalf.com>
4716 Date: Mon Feb 4 08:28:17 2008 +0100
4718 [new uImage] POWERPC: Split get_fdt() into get and relocate routines
4720 PPC specific FDT blob handling code is divided into two separate routines:
4722 get_fdt() - find and verify a FDT blob (either raw or image embedded)
4723 fdt_relocate() - move FDT blob to within BOOTMAP if needed
4725 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
4726 Acked-by: Kumar Gala <galak@kernel.crashing.org>
4728 commit 33fa5c0bfaf465de8ceb23fcd6b397f68b35a817
4729 Author: Jon Loeliger <jdl@freescale.com>
4730 Date: Mon Feb 25 13:13:37 2008 -0600
4732 86xx: Fix renamed GUR symbols in sbc8641d board.
4734 Back in commit a551cee99ad1d1da20fd23ad265de47448852f56
4735 (86xx: Fix GUR PCI config registers properly), we should have
4736 changed the MPC86xx_PORBMSR_HA and MPC86xx_PORDEVSR_IO_SEL
4737 symbols in the sbc8641d board as well. Fix this oversight.
4739 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4741 commit 64cd594e623c39f73964d18787763e4533f791f7
4742 Author: Stefan Roese <sr@denx.de>
4743 Date: Mon Feb 25 16:50:48 2008 +0100
4745 ppc4xx: Fix acadia_nand build problem
4747 Don't include testdram() on NAND-booting target acadia_nand. This saves
4748 a few bytes and makes the target build clean again.
4750 Signed-off-by: Stefan Roese <sr@denx.de>
4752 commit 14e099e698d41e8179d05c2b2dbcf704a236f748
4753 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4754 Date: Sun Feb 24 23:03:12 2008 +0000
4756 mx1fs2/flash: Fix multiple pointertargets in assignment differ in signedness
4758 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4760 commit 724902c8464e610642b3a170278b99710325888e
4761 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4762 Date: Sun Feb 24 23:03:11 2008 +0000
4764 arm-imx: Fix registers definition
4766 Sync registers definition with linux
4768 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4770 commit 4cd288b589ea1178947c6e364453c32b3dede6b7
4771 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4772 Date: Sun Feb 24 23:03:10 2008 +0000
4774 actua1/actua2/actua3: Fix multipleunused variable
4777 actux1.c: In function 'checkboard':
4778 actux1.c:92: warning: unused variable 'revision'
4781 actux2.c: In function 'checkboard':
4782 actux2.c:100: warning: unused variable 's'
4783 actux2.c:99: warning: unused variable 'revision'
4784 actux2.c: In function 'reset_phy':
4785 actux2.c:130: warning: unused variable 'i'
4788 actux3.c: In function 'checkboard':
4789 actux3.c:114: warning: unused variable 'revision'
4791 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4793 commit d5934ad7756f038a393a9cfab76a4fe306d9d930
4794 Author: Marian Balakowicz <m8@semihalf.com>
4795 Date: Mon Feb 4 08:28:09 2008 +0100
4797 [new uImage] Add dual format uImage support framework
4799 This patch adds framework for dual format images. Format detection is added
4800 and the bootm controll flow is updated to include cases for new FIT format
4803 When the legacy (image_header based) format is detected appropriate
4804 legacy specific handling is invoked. For the new (FIT based) format uImages
4805 dual boot framework has a minial support, that will only print out a
4806 corresponding debug messages. Implementation of the FIT specific handling will
4807 be added in following patches.
4809 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
4811 commit b29661fc1151077776454288051bc9a488351ce8
4812 Author: Wolfgang Denk <wd@denx.de>
4813 Date: Sun Feb 24 15:21:36 2008 +0100
4815 Coding style cleanup. Prepare v1.3.2-rc2 release candidate
4817 Signed-off-by: Wolfgang Denk <wd@denx.de>
4819 commit 00b48a48424894daa589d166d73277830b1c6ac4
4820 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4821 Date: Sat Feb 23 12:15:56 2008 +0100
4823 ENV: remove saveenv when CFG_ENV_IS_NOWHERE is selected
4825 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4827 commit b075d74efb70ff68c49a2532f26b56d6703b69c1
4828 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4829 Date: Sat Feb 23 17:24:16 2008 +0900
4831 Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets.
4833 ----------------------------------------------------------------
4834 Olaf Hering [Wed, 17 Oct 2007 06:27:13 +0000 (23:27 -0700)]
4836 Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on
4839 GCC can be made to warn about usage of long long types with ISO C90
4840 (-ansi), but only with -pedantic. You can write this in a way that even
4841 then it doesn't cause warnings, namely by:
4844 __extension__ typedef __signed__ long long __s64;
4845 __extension__ typedef unsigned long long __u64;
4848 The __extension__ keyword in front of this switches off any pedantic
4849 warnings for this expression.
4851 Signed-off-by: Olaf Hering <olh@suse.de>
4852 Cc: <linux-arch@vger.kernel.org>
4853 Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
4854 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4855 ----------------------------------------------------------------
4857 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4859 commit 208acd112e6517b21fc30c420396902b103563ac
4860 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4861 Date: Sat Feb 23 17:07:57 2008 +0900
4863 cpu/mcf52x2/config.mk: Make needlessly deffered expansions immediate.
4865 This will reduce the build time.
4867 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4869 commit 495a0dde7fa1b14cdc15607d86503ec2bdcd02c4
4870 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4871 Date: Sat Feb 23 17:05:00 2008 +0900
4873 cpu/ppc4xx/config.mk: Make a needlessly deffered expansion immediate.
4875 This will reduce the build time.
4877 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4879 commit e682ba399a1d76f09d8cc7af1e57066f1d360d91
4880 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4881 Date: Sat Feb 23 16:58:41 2008 +0900
4883 cpu/mips/cofigl.mk: Make a needlessly deffered expansion immediate.
4885 This reduces the build time by ~10%. Here's the gth2_config example.
4888 real 0m31.441s 0m27.833s
4889 user 0m24.766s 0m23.045s
4890 sys 0m10.425s 0m7.468s
4892 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4894 commit 02409f8cf54c7cd91981f0dfec135dbf3858090c
4895 Author: Marcel Moolenaar <marcelm@juniper.net>
4896 Date: Fri Feb 22 10:48:07 2008 -0800
4898 make define2mk.sed work on FreeBSD
4900 In the thread "[1.3.2-rc1] MPC8548CDS/MPC8555CDS configs fails to link",
4901 the define2mk.sed script was identified as the source of the link
4902 failure on FreeBSD. The problem is that sed(1) does not always support
4903 the '+' operator. It isn't on FreeBSD. The attach patch implements the
4904 equivalent, using the '*' operator instead and should work everywhere.
4906 Signed-off-by: Marcel Moolenaar <marcelm@juniper.net>
4908 commit e5084af8ded58453cd07ec1af8b0f29f34122bbc
4909 Author: Detlev Zundel <dzu@denx.de>
4910 Date: Fri Feb 22 17:21:32 2008 +0100
4912 Replace deprecated "ramdisk" with "ramdisk_size" kernel parameter.
4914 The Linux commit fac8b209b1084bc85748bd54e13d00c1262b220f ("Remove
4915 final traces of long-deprecated "ramdisk" kernel parm") makes these
4918 Signed-off-by: Detlev Zundel <dzu@denx.de>
4920 commit d01b847c5cd070895c4ba178c85cd068a95cf7cd
4921 Author: Larry Johnson <lrj@acm.org>
4922 Date: Thu Feb 21 13:58:16 2008 -0500
4924 LM75 bug fix for negative temperatures
4926 When the LM75 temperature sensor measures a temperature below 0 C, the
4927 current driver does not perform sign extension, so the result returned is
4928 256 C too high. This patch fixes the problem.
4930 Signed-off-by: Larry Johnson <lrj@acm.org>
4932 commit 5a910c224b13e413bda41922379add6d75c32da3
4933 Author: Heiko Schocher <hs@denx.de>
4934 Date: Thu Feb 21 18:33:45 2008 +0100
4936 IDS8247: update MAINTAINER entry.
4938 Signed-off-by: Heiko Schocher <hs@denx.de>
4940 commit 79eac2bfb591f2b028ec1735049dc91e4320de4a
4941 Author: Heiko Schocher <hs@denx.de>
4942 Date: Thu Feb 21 18:31:15 2008 +0100
4944 Fix device tree for mgsuvd board.
4946 Rename the "scc" node in "ethernet" for the mgsuvd board.
4948 Signed-off-by: Heiko Schocher <hs@denx.de>
4950 commit 2e721094a70a52206af2e1bf1208d9a7131f6dad
4951 Author: Yuri Tikhonov <yur@emcraft.com>
4952 Date: Thu Feb 21 14:23:42 2008 +0100
4954 lwmon5: enable hardware watchdog
4956 Some boards (e.g. lwmon5) may use rather small watchdog intervals, so
4957 causing it to reboot the board if U-Boot does a long busy-wait with
4958 udelay(). Thus, for these boards we have to restart WD more
4961 This patch splits the busy-wait udelay() into smaller, predefined,
4962 intervals, so that the watchdog timer may be resetted with the
4963 configurable (CONFIG_WD_PERIOD) interval.
4965 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
4967 commit bc77881247ee6f95d7a9ebc499d26b96bae38c9d
4968 Author: Anatolij Gustschin <agust@denx.de>
4969 Date: Thu Feb 21 12:52:29 2008 +0100
4971 ppc4xx: Support for ATI Radeon 9200 card on sequoia
4973 Adds configuration option for ATI Radeon 9200 card
4974 support to sequoia config file. If CONFIG_VIDEO
4975 is enabled, TEXT_BASE should be changed to 0xFFF80000.
4977 Signed-off-by: Anatolij Gustschin <agust@denx.de>
4979 commit 5a9abcc317cf3c8a69559ff83081f4e5d719edb7
4980 Author: Kumar Gala <galak@kernel.crashing.org>
4981 Date: Mon Feb 18 08:18:07 2008 -0600
4983 Remove duplicate defines for ARRAY_SIZE
4985 A few duplicate of the ARRAY_SIZE macro sneaked in since we put
4986 the define in common.h.
4988 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4990 commit 81d93e5c4b83d8b6dcee69de6f4a14ccf6f7114a
4991 Author: Kumar Gala <galak@kernel.crashing.org>
4992 Date: Mon Feb 18 08:09:37 2008 -0600
4994 ppc: Allow boards to specify effective amount of memory
4996 For historical reasons we limited the stack to 256M because some boards
4997 could only map that much via BATS. However newer boards are capable of
4998 mapping more memory (for example 85xx is capable of doing up to 2G).
5000 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5002 commit 755c35f54ba7eb7687aa7935e04a02a01ef1b27b
5003 Author: Mike Frysinger <vapier@gentoo.org>
5004 Date: Mon Feb 18 05:24:13 2008 -0500
5006 include autoconf.mk before any other .mk files
5008 This bumps the autoconf.mk include step above board/cpu/arch/etc... so that
5009 those .mk files can have make if statements based on the current config.
5011 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
5013 commit 16fe77752eee099b9fb61ed73460e51cc94b37ba
5014 Author: Mike Frysinger <vapier@gentoo.org>
5015 Date: Mon Feb 18 05:10:07 2008 -0500
5017 error check autoconf.mk generation
5019 If any of the steps for generating autoconf.mk fail currently, they go
5020 unnoticed. To fix, we can simply add 'set -e' to the long list of commands.
5021 This is simpler and more robust than placing '|| exit $$?' after every line.
5023 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
5025 commit 019895a8dee71a9f00da05c03e379f45d581b0fe
5026 Author: Stefano Babic <sbabic@denx.de>
5027 Date: Mon Feb 18 08:03:51 2008 +0100
5029 Fix bug in dependency checking
5031 By adding VERSION_FILE to the PHONY targets the script
5032 /tools/setlocalversion is always called and version_autogenerated.h
5033 is replaced only if the script find a modified source file.
5035 Signed-off-by: Stefano Babic <sbabic@denx.de>
5037 commit 98ba144ccc912eee90dd42699f023c497ce774c6
5038 Author: Kyungmin Park <kmpark@infradead.org>
5039 Date: Mon Feb 18 14:35:43 2008 +0900
5041 Fix GPMC CS2 memory setup at apollon
5043 It disables the current map first
5045 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
5047 commit e845e07e1e6e64f40e35688439d3cdcf01cfff4f
5048 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5049 Date: Sun Feb 17 23:52:46 2008 +0100
5051 uli526x: Fix multiple differ in signedness and parentheses around comparison
5053 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5055 commit beeccf7a5dc5415c202e0132a33c58fc316c2a62
5056 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5057 Date: Sun Feb 17 16:58:04 2008 +0100
5059 MIPS: Fix CFG_NO_FLASH support
5061 - Fix flash_init call when CFG_NO_FLASH is used
5062 - Remove no more needed flash.c for qemu-mips
5064 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5066 commit edfed1d91df2b2670a812ca9d1a1f9faae7dba47
5067 Author: Mike Frysinger <vapier@gentoo.org>
5068 Date: Sat Feb 16 02:40:18 2008 -0500
5070 easylogo: clean up some more and add -r (rgb) support
5072 Michael Hennerich added support for outputting an image in RGB format rather
5073 than forcing YUYV all the time. This makes obvious sense if the display you
5074 have takes RGB input rather than YUYV.
5076 Rather than hack in support for options, I've converted it to use getopt and
5077 cleaned up the argument parsing in the process.
5079 Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
5080 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
5082 commit f65c98129ccada3f7caf97d80395a95b84e911de
5083 Author: Mike Frysinger <vapier@gentoo.org>
5084 Date: Sat Feb 16 02:12:37 2008 -0500
5086 Makefile: add target for $(LDSCRIPT)
5088 If the $(LDSCRIPT) does not exist (normally it's board/$(BOARD)/u-boot.lds),
5089 then change into the board directory and try and create it. This allows you
5090 to generate the linker script on the fly based upon board defines (like the
5091 Blackfin boards do).
5093 There should be no regressions due to this change as the normal case is to
5094 already have a u-boot.lds file. If that's the case, then there's nothing to
5095 generate, and so make will always exit. The fix here is that if the linker
5096 script does not exist, the implicit rules take over and attempt to guess how
5097 to generate the file.
5099 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
5101 commit 5583cbf736474ef754e128a54fb78632f57b48fd
5102 Author: Marian Balakowicz <m8@semihalf.com>
5103 Date: Thu Feb 21 17:27:49 2008 +0100
5105 [new uImage] Fix erroneous use of image_get_magic() in fdc/usb cmds
5107 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
5109 commit 2242f5369822bc7780db95c47985bb408ea9157b
5110 Author: Marian Balakowicz <m8@semihalf.com>
5111 Date: Thu Feb 21 17:27:41 2008 +0100
5113 [new uImage] Rename and move print_image_hdr() routine
5115 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
5117 commit f50433d670ec2ee9e96abac67cdc6e5e061a810d
5118 Author: Marian Balakowicz <m8@semihalf.com>
5119 Date: Thu Feb 21 17:20:20 2008 +0100
5121 [new uImage] Add fit_parse_conf() and fit_parse_subimage() routines
5123 Introducing routines for parsing new uImage format bootm arguments:
5124 [<addr>]#<conf> - configuration specification
5125 [<addr>]:<subimg> - subimage specification
5127 New format images can contain multiple subimages of the same type. For example
5128 a single new format image file can contain three kernels, two ramdisks and a
5129 couple of FDT blobs. Subimage and configuration specifications are extensions
5130 to bootm (and other image-related commands) arguments' syntax that allow to
5131 specify which particular subimage should be operated on.
5133 Subimage specification is used to denote a particular subimage. Configurations
5134 are a bit more complex -- they are used to define a particualr booting setup,
5135 for example a (kernel, fdt blob) pair, or a (kernel, ramdisk, fdt blob) tuple,
5138 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
5140 commit fff888a1997ff7de9b29e24050fc4a0fd403ba16
5141 Author: Marian Balakowicz <m8@semihalf.com>
5142 Date: Thu Feb 21 17:20:19 2008 +0100
5144 [new uImage] Add gen_get_image() routine
5146 This routine assures that image (whether legacy or FIT) is not
5147 in a special dataflash storage.
5149 If image address is a dataflash address image is moved to system RAM.
5151 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
5153 commit 75d3e8fbd93c14d9929d024c75af2d742c76db70
5154 Author: Marian Balakowicz <m8@semihalf.com>
5155 Date: Thu Feb 21 17:20:18 2008 +0100
5157 [new uImage] Pull in libfdt if CONFIG_FIT is enabled
5159 New uImage format (Flattened Image Tree) requires libfdt
5160 functionality, print out error message if CONFIG_OF_LIBFDT
5163 New uImage support is enabled by defining CONFIG_FIT (and CONFIG_OF_LIBFDT).
5164 This commit turns it on by default.
5166 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
5168 commit 1ba639da5604a64b3ed884a2cbb1c5414a9fa728
5169 Author: Michael Schwingen <michael@schwingen.org>
5170 Date: Mon Feb 18 23:16:35 2008 +0100
5172 CFI: Do not use uninitialized cmd_reset
5174 Do not use uninitialized cmd_reset; issue both AMD and Intel reset
5177 From a short test, it looks like AMD-style flash roms treat *any* unknown
5178 command write as a reset, at least when in CFI Query mode, so issuing the
5179 Intel reset command to AMD-style flashs seems safe (from the small sample I
5180 have), plus the 3-cycle magic sequence should kick the state machine into
5181 the right state even without a reset command. Since the AMD-style flashs
5182 require the unlock sequence for real operation, I chose to try the AMD reset
5183 command first, so that Intel flashs do no see an invalid command prior to
5186 I have tested the patch on AM29LV320-style flashs from Fujitsu and Macronix,
5187 plus Intel StrataFlash.
5189 Signed-off-by: Michael Schwingen <michael@schwingen.org>
5190 Signed-off-by: Stefan Roese <sr@denx.de>
5192 commit e7a85f26830c9f2e78506421c2d519a2965bc7a1
5193 Author: Rafal Jaworowski <raj@semihalf.com>
5194 Date: Thu Feb 21 11:56:44 2008 +0100
5196 API: Add (c) and licensing notice to the public API header.
5198 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
5200 commit 928d1d77f8623c120d8763e20e1ca58df9c5c4c6
5201 Author: Yuri Tikhonov <yur@emcraft.com>
5202 Date: Thu Feb 21 11:06:07 2008 +0100
5204 Fix CPU POST test failure
5206 The CPU POST test code (run from cpu_post_exec_31()) doesn't follow the
5207 ABI carefully, at least the CR3, CR4, and CR5 fields of CR are clobbered
5208 by it. The gcc-4.2 with its more aggressive optimization exposes this fact.
5209 This patch just saves the CR value before running the test code, so allowing
5210 it to do anything it wants with CR.
5212 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
5213 Acked-by: Yuri Tikhonov <yur@emcraft.com>
5216 commit d5908b093955415f3d340706378b991f911af671
5217 Author: Jon Loeliger <jdl@freescale.com>
5218 Date: Wed Feb 20 15:26:51 2008 -0600
5220 8610HPCD: Document the flashbank selection switches.
5222 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5224 commit a551cee99ad1d1da20fd23ad265de47448852f56
5225 Author: Jon Loeliger <jdl@freescale.com>
5226 Date: Wed Feb 20 14:22:26 2008 -0600
5228 86xx: Fix GUR PCI config registers properly.
5230 Back in commit 975a083a5ef785c414b35f9c5b8ae25b26b41524 where
5231 I tried to "8610HPCD: Fix typos in two PCI setup registers", I
5232 botched it due to not realizing that 8610 and 8641 had different
5233 Global Utility Register defintions, one of which was like 85xx,
5234 and the other wasn't. Correct this problem by introducing two
5235 symbols, one for each 86xx SoC, but neither of which is named
5238 My bad. Lovely Wednesday with git bisect. You know.
5240 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5242 commit cb06eb961bdffc8728b38c242473d802e83ab2b4
5243 Author: Jon Loeliger <jdl@freescale.com>
5244 Date: Wed Feb 20 12:24:11 2008 -0600
5246 8610HPCD: Don't use VIDEO/CFB_CONSOLE by default.
5248 Without an actual supported video card hooked up, enabling
5249 the CONFIG_VIDEO by default just makes it look broken by
5250 routing all console output to the video card. Don't.
5252 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5254 commit 4d264eff4312f230776b913edade7ceb75f1b1e0
5255 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
5256 Date: Wed Jan 30 15:08:15 2008 -0600
5258 ColdFire: Fix missing code flash size for M5485EVB
5260 Signed-off-by: James Mahan <kmahan@freescale.com>
5261 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5263 commit c54f9263e4e11e34b1e70c160bc467ef1d8ec59d
5264 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
5265 Date: Wed Jan 30 15:04:42 2008 -0600
5267 ColdFire: Fix 5282 and 5271 interrupt mask bit
5269 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5271 commit 975a083a5ef785c414b35f9c5b8ae25b26b41524
5272 Author: Jon Loeliger <jdl@freescale.com>
5273 Date: Tue Feb 19 12:31:08 2008 -0600
5275 8610HPCD: Fix typos in two PCI setup registers.
5277 The two symbols MPC86xx_PORDEVSR_IO_SEL and MPC86xx_PORBMSR_HA
5278 were erroneously present as 85xx names and values, leftover from
5279 the clone wars. Fix this by removing the 85xx cruft from the
5282 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5284 commit 13f5433f700d4da9f6fdf2a4bb80310133a7c170
5285 Author: Jon Loeliger <jdl@freescale.com>
5286 Date: Mon Feb 18 14:01:56 2008 -0600
5288 86xx: Convert sbc8641d to use libfdt.
5290 This is the proper fix for a missing closing brace in the function
5291 ft_cpu_setup() noticed by joe.hamman <at> embeddedspecialties.com.
5292 The ft_cpu_setup() function in mpc8641hpcn.c should have been
5293 removed earlier as it was under the obsolete CONFIG_OF_FLAT_TREE,
5294 but was missed. Only, the sbc8641d was nominally still using it.
5295 It all got ripped out, and the funcality that was in ft_board_setup()
5296 was refactored to remove the CPU portions into the new file
5297 cpu/mpc86xx/fdt.c instead. Make sbc8641d use this now.
5299 Based loosely on an original patch from joe.hamman@embeddedspecialties.com
5301 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5303 commit 04efddc87c50c84f85dad5c331c634a6ce830a83
5304 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5305 Date: Sun Feb 17 23:35:31 2008 +0100
5307 mpc86xx: Fix unused variable 'config' and 'immap'
5309 and remove useless CONFIG_DDR_INTERLEAVE
5311 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5313 commit 83d1b3876695c4f21faff2b731d9ef83f38ed208
5314 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5315 Date: Sun Feb 17 23:03:36 2008 +0100
5317 mpc86xx: Fix implicit declaration of functions 'init_laws' and 'disable_law'
5319 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5321 commit b6f29c84c208a091f95a10cbc9852d729659ba20
5322 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5323 Date: Sun Feb 17 14:15:31 2008 +0100
5325 s3c24x0: Fix unused variable 'i' in function 'serial_init_dev'
5327 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5329 commit 0937b8d869fdb42d6ad4fe312958639bd62c973f
5330 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5331 Date: Sun Feb 17 14:15:32 2008 +0100
5333 pxa: fix assignment from incompatible pointer type
5335 fix mmc_bread function prototype
5337 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5339 commit 64d792063fff90b8118179b092feee09fe5cae13
5340 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5341 Date: Sun Feb 17 14:15:30 2008 +0100
5343 at91cap9adk: fix implicit declaration of function 'eth_init'
5345 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5347 commit 375c4353db8f900f7ec772e26fab116ec00f7d3a
5348 Author: Wolfgang Denk <wd@denx.de>
5349 Date: Sun Feb 17 15:43:44 2008 +0100
5351 Remove files added by mistake, update CHANGELOG.
5353 Signed-off-by: Wolfgang Denk <wd@denx.de>
5355 commit b738654d3c84a30f2bfd9a8d7652ff20807c890c
5356 Author: Mike Nuss <mike@terascala.com>
5357 Date: Wed Feb 6 11:10:11 2008 -0500
5359 PPC440EPx: Optionally enable second I2C bus
5361 The option CONFIG_I2C_MULTI_BUS does not have any effect on Sequoia, the
5362 PPC440EPx reference platform, because IIC1 is never enabled. Add Sequoia board
5363 code to turn on IIC1 if CONFIG_I2C_MULTI_BUS is selected.
5365 Signed-off-by: Mike Nuss <mike@terascala.com>
5366 Cc: Stefan Roese <sr@denx.de>
5368 commit ef5b4f221c22d05770878513951745f236b5b43f
5369 Author: Niklaus Giger <niklaus.giger@netstal.com>
5370 Date: Tue Feb 5 10:26:44 2008 +0100
5372 ppc4xx: HCU4/5. Cleanup configs
5374 - hcu4.h: Removed define of CONFIG_PPC405GPr
5375 - Corrected phy addresses
5376 - Fix boot variables
5377 - Respect line length of 80 chars
5379 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
5381 commit 74973126d1be63ac75bdc192f46234dca3a7c421
5382 Author: Niklaus Giger <niklaus.giger@netstal.com>
5383 Date: Tue Feb 5 11:31:28 2008 +0100
5385 ppc4xx: HCU4/5. Cleanups
5387 - Fix some coding style violations.
5388 - Use in/out_u16/32 where appropriate.
5389 - Use register names from ppc405.h.
5390 - Fix trace useage for Lauterbach.
5391 - Remove obsolete generation HCU2.
5392 - Renamed fixed_hcu4_sdram to init_ppc405_sdram.
5394 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
5396 commit 8cc10d06b833ed917a19ad358c8ebbed8bc19555
5397 Author: Niklaus Giger <niklaus.giger@netstal.com>
5398 Date: Tue Feb 5 10:26:41 2008 +0100
5400 ppc4xx: PPC405GPr fix missing register definitions
5402 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
5404 commit 214398d9cb22268d9d4f7563359edca0f78297a2
5405 Author: Larry Johnson <lrj@acm.org>
5406 Date: Fri Jan 18 21:49:05 2008 -0500
5408 ppc4xx: Beautify configuration files for Sequoia and Korat boards
5410 Signed-off-by: Larry Johnson <lrj@acm.org>
5412 commit 30c6a241e88499f536e86d325759e29ba00ff67f
5413 Author: Anatolij Gustschin <agust@denx.de>
5414 Date: Fri Feb 15 20:09:01 2008 +0100
5416 Wipe out assembler warnings while compiling x86 biosemu
5418 This patch tries to get rid of some assembler warnings about
5419 changed .got2 section type while compiling x86 bios emulator
5422 Signed-off-by: Anatolij Gustschin <agust@denx.de>
5424 commit 67a4389e39ad853d65b72e2b7cad15c7e8291147
5425 Author: Wolfgang Denk <wd@denx.de>
5426 Date: Fri Feb 15 00:57:09 2008 +0100
5428 Prepare v1.3.2-rc1 release candidate
5430 commit f33e9653c9c09868995d788511d573771c209fe5
5431 Author: Anatolij Gustschin <agust@denx.de>
5432 Date: Fri Feb 15 00:13:20 2008 +0100
5434 Fix compile warning on lib_ppc/board.c
5436 Signed-off-by: Anatolij Gustschin <agust@denx.de>
5438 commit e5c6f9f8bec4dff9603419161e3a15cc8ad5d5f4
5439 Author: Anatolij Gustschin <agust@denx.de>
5440 Date: Thu Feb 14 18:22:04 2008 +0100
5442 Add Radeon Mobility 9200 pci device id to the radeon driver
5444 This patch extends PCI device id table of the
5445 radeon driver so that the driver will also support
5446 Radeon Mobility 9200 (M9+) based boards.
5448 Signed-off-by: Anatolij Gustschin <agust@denx.de>
5450 commit 1b8607e1f7143548c6062c28371449ec69588c00
5451 Author: Anatolij Gustschin <agust@denx.de>
5452 Date: Thu Feb 14 18:19:50 2008 +0100
5454 Extend ATI Radeon driver to support more video modes
5456 Adds ATI Radeon 9200 support for 1280x1024, 1024x768,
5457 800x600, 640x480 at 24, 16 and 8 bpp.
5459 Signed-off-by: Anatolij Gustschin <agust@denx.de>
5461 commit 4124382de029d361162a4b8cecc773eb8f26e2a8
5462 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5463 Date: Sun Feb 10 17:05:20 2008 +0100
5465 xsengine: fix typo and few coding style
5467 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5469 commit 6f4abee789b6d9be3ec4b97ad48f509355559e9e
5470 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
5471 Date: Fri Feb 8 21:25:58 2008 +0100
5473 Fix wrong memory limit calculation in memory-test
5475 If the length of the memory address range passed to the "mtest" command is
5476 not of the form 2^x - 1, not all address lines are tested. This bug is
5477 inherited from the original software at
5478 http://www.netrino.com/Embedded-Systems/How-To/Memory-Test-Suite-C. Fix
5481 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
5483 commit 7e30f5eac7f07082a7ca77b7d91b944a8d0af6db
5484 Author: Wolfgang Denk <wd@denx.de>
5485 Date: Fri Feb 15 00:11:39 2008 +0100
5487 Coding STyle cleanup.
5489 Signed-off-by: Wolfgang Denk <wd@denx.de>
5491 commit f6921e3dc331293c873ec4d109fd5517a42a90b3
5492 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5493 Date: Tue Feb 5 13:30:43 2008 +0900
5495 sh: Fix register address of SH7722
5497 The address of SH7722 is wrong by old document.
5498 This patch fixes this problem.
5500 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5502 commit 0ec7a061fb1c277f6afd73d61dd71bd21e7ef7b2
5503 Author: Mike Frysinger <vapier@gentoo.org>
5504 Date: Mon Feb 4 17:44:23 2008 -0500
5506 only update version header as needed
5508 Constantly rebuilding the version header will force useless relinking, so we
5509 simply need to compare the new header with the existing one before updating
5512 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
5514 commit 208447f8e953f347425eb92c8e28d59e6d911363
5515 Author: Mike Frysinger <vapier@gentoo.org>
5516 Date: Mon Jan 28 05:56:19 2008 -0500
5518 Do not specify a CROSS_COMPILE default when executing size
5520 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
5522 commit 1f780aa6f17a5d79791d69ec1d2f66d76ac45d8e
5523 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
5524 Date: Wed Feb 13 11:19:19 2008 +0100
5526 Fix return value of mtest when CFG_ALT_MEMTEST set
5528 Fix a missing return statement from a non-void function.
5530 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
5532 commit 943afa229cf5bf70ef917c7eb6bd0db59a1ba602
5533 Author: Timur Tabi <timur@freescale.com>
5534 Date: Wed Jan 9 14:35:26 2008 -0600
5536 85xx, 86xx: Determine I2C clock frequencies and store in global_data
5538 Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.
5540 Update the get_clocks() function in 85xx and 86xx to determine the I2C
5541 clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.
5543 Signed-off-by: Timur Tabi <timur@freescale.com>
5545 commit b931b3a9c3bdfaaeaa71e57a6026eec726005b08
5546 Author: Wolfgang Denk <wd@denx.de>
5547 Date: Thu Feb 14 23:18:01 2008 +0100
5549 TQM834x: clean up configuration
5551 Get board name consistent with Linux and elsewhere;
5552 get rid of local network definitions etc.
5554 Signed-off-by: Wolfgang Denk <wd@denx.de>
5556 commit 38cc09c55b1d7f233789052c6fc462e5377669a9
5557 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5558 Date: Thu Feb 14 08:02:12 2008 +0100
5560 TFTP: fix search of ':' in BootFile
5562 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5564 commit 0bc9efada170096c6b273f19165e32936d330d80
5565 Author: Wolfgang Denk <wd@denx.de>
5566 Date: Thu Feb 14 22:46:55 2008 +0100
5568 Coding style cleanup; update CHANGELOG.
5570 Signed-off-by: Wolfgang Denk <wd@denx.de>
5572 commit e7670f6c1e52ae6d2a43ff75a8bcfa7a5c86e47b
5573 Author: Wolfgang Denk <wd@denx.de>
5574 Date: Thu Feb 14 22:43:22 2008 +0100
5576 PPC: Use r2 instead of r29 as global data pointer
5578 R29 was an unlucky choice as with recent toolchains (gcc-4.2.x) gcc
5579 will refuse to use load/store multiple insns; instead, it issues a
5580 list of simple load/store instructions upon function entry and exit,
5581 resulting in bigger code size, which in turn makes the build for a
5586 Signed-off-by: Wolfgang Denk <wd@denx.de>
5588 commit 3c234efa693bc59906c2be55c7918ecbb55392ea
5589 Author: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
5590 Date: Wed Jan 30 09:08:49 2008 +0100
5592 ARM: make the machid configurable via the environment
5594 If the variable "machid" exists, let do_bootm_linux use that instead
5595 of bd->bi_arch_number.
5597 Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
5599 commit dd24058407c5add45cc60aec6c757ddc1a17e1b0
5600 Author: Vlad Lungu <vlad@comsys.ro>
5601 Date: Wed Jan 23 16:34:46 2008 +0200
5603 Use #ifdef CONFIG_FSLDMAFEC
5605 MCD_tasks.c lacks [subject] so compilation of mips targets (and more, probably)
5608 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
5610 commit 26c7bab81e08dc7bd696c48f753428a829629bd8
5611 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
5612 Date: Sat Jan 19 10:25:59 2008 +0900
5614 common/miiphyutil.c: Cleanup MII_DEBUG and debug()
5616 Current MII_DEBUG is confusing in two ways. One is useless define-then-
5617 undef at the top of the file. The other is there is only one debug() in
5618 this file, and that doesn't seem worthwhile to bother having MII_DEBUG.
5619 While there are many useful printf()/puts() debug codes, but they are for
5620 DEBUG, not for MII_DEBUG.
5622 This patch tries to put them all together into MII_DEBUG and debug().
5624 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
5626 commit 751b9b5189f3274b03c809172631316d6b002c82
5627 Author: Kyungmin Park <kmpark@infradead.org>
5628 Date: Thu Jan 17 16:43:25 2008 +0900
5630 OneNAND Initial Program Loader (IPL) support
5632 This patch enables the OneNAND boot within U-Boot.
5633 Before this work, we used another OneNAND IPL called X-Loader based
5634 on open source. With this work, we can build the oneboot.bin image
5635 without other program.
5637 The build sequence is simple.
5638 First, it compiles the u-boot.bin
5639 Second, it compiles OneNAND IPL
5640 Finally, it becomes the oneboot.bin from OneNAND IPL and u-boot.bin
5641 The mechanism is similar with NAND boot except it boots from itself.
5643 Another thing is that you can only use the OneNAND IPL only to work
5644 other bootloader such as RedBoot and so on.
5646 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
5648 commit 21f6f9636f0e978397548751347425fbf8d42bb3
5649 Author: Andy Fleming <afleming@freescale.com>
5650 Date: Wed Jan 16 13:06:59 2008 -0600
5652 Fix CONFIG_MMC usage in fat code
5654 A #if statement in fat.c depended on CONFIG_MMC, instead of
5655 defined(CONFIG_MMC). This meant CONFIG_MMC needed to be defined
5656 as "1" rather than just defined. Now it's better.
5658 Signed-off-by: Andy Fleming <afleming@freescale.com>
5660 commit f57d7d364ce189e39b0a64338d2f8012c074a2bd
5661 Author: Rafal Jaworowski <raj@semihalf.com>
5662 Date: Tue Jan 15 12:52:31 2008 +0100
5664 ppc: Refactor cache routines, so there is only one common set.
5666 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
5668 commit 3f2ac8f928c76cbd2374437b2d079f8b4324aaba
5669 Author: Jon Loeliger <jdl@jdl.com>
5670 Date: Wed Jan 23 15:55:02 2008 -0600
5672 86xx: Fix compilation warning in sys_eprom.c
5674 sys_eeprom.c:82:9: warning: unknown escape sequence '\/'
5676 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5678 commit 65230107025733e89e28fd5e5cfd916d4953c28a
5679 Author: Haavard Skinnemoen <hskinnemoen at>
5680 Date: Fri Feb 22 11:40:50 2008 +0000
5682 Move AT91RM9200DK board support under board/atmel
5684 We already have a vendor subdir for Atmel, so we should use it.
5686 Signed-off-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
5688 commit 6d0943a6be99977d6d853d51749e9963d68eb192
5689 Author: Andreas Engel <andreas.engel@ericsson.com>
5690 Date: Mon Jan 14 09:06:52 2008 +0000
5692 ARM: cleanup duplicated exception handlingcode
5694 Move duplicated exception handling code into lib_arm.
5696 Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
5698 commit ea8d989f4ef8203e1c0291e62435a8c62e3cfb29
5699 Author: Timo Tuunainen <timo.tuunainen@sysart.fi>
5700 Date: Fri Feb 1 10:09:03 2008 +0000
5702 Support for Artila M-501 starter kit
5704 Kimmo Leppala / Sysart and
5705 Timo Tuunainen / Sysart
5707 commit 9604b6e53ddae4fe00a488cbcd6b0e6cb344bccc
5708 Author: Stelian Pop <stelian@popies.net>
5709 Date: Mon Feb 11 10:50:19 2008 +0000
5713 ---------------------------------
5715 read_dataflash() takes a signed char pointer as a parameter. Silence a
5716 few warnings dues to incorrect parameter types in env_dataflash.c.
5718 Signed-off-by: Stelian Pop <stelian@popies.net>
5720 commit 64e8a06af68cda174a8a06d0a61fce5e5bb189d7
5721 Author: Stelian Pop <stelian@popies.net>
5722 Date: Thu Feb 7 09:42:57 2008 +0000
5724 AT91CAP9 support : move board files to Atmel vendor directory.
5726 AT91CAP9 support : move at91cap9adk board files to Atmel vendor directory.
5728 Signed-off-by: Stelian Pop <stelian@popies.net>
5730 commit 7263ef191b87da94768f762c7093bedeb70db98f
5731 Author: Stelian Pop <stelian at>
5732 Date: Thu Jan 3 21:15:56 2008 +0000
5734 AT91CAP9 support : MACB changes
5736 Signed-off-by: Stelian Pop <stelian <at> popies.net>
5737 Acked-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
5739 commit 6afcabf11d7321850f4feaadfee841488ace54c5
5740 Author: Stelian Pop <stelian@popies.net>
5741 Date: Thu Feb 7 16:37:54 2008 +0000
5743 AT91CAP9 support : board/ files
5745 Signed-off-by: Stelian Pop <stelian@popies.net>
5747 commit fefb6c10928caa9e71335cad64dcb65c83fce8ab
5748 Author: Stelian Pop <stelian at>
5749 Date: Wed Jan 30 21:15:54 2008 +0000
5751 AT91CAP9 support : cpu/ files
5753 Signed-off-by: Stelian Pop <stelian <at> popies.net>
5755 commit fa506a926cec348805143576c941f8e61b333cc0
5756 Author: Stelian Pop <stelian@popies.net>
5757 Date: Thu Jan 31 21:15:53 2008 +0000
5759 AT91CAP9 support : include/ files
5761 Signed-off-by: Stelian Pop <stelian@popies.net>
5763 commit 20b197c6f2799af399a68f96a1aff543a75621b8
5764 Author: Stelian Pop <stelian@popies.net>
5765 Date: Sun Jan 20 19:49:21 2008 +0000
5767 AT91CAP9 support : build integration
5769 Signed-off-by: Stelian Pop <stelian@popies.net>
5771 commit d49fe4bed5b69ec910909d1bd62da23ecd8801fd
5772 Author: Stelian Pop <stelian@popies.net>
5773 Date: Sun Jan 20 21:07:00 2008 +0000
5775 Improve DataFlash CS definition.
5777 Use a structure instead of the error prone unnamed array to
5778 define the possible dataflash banks.
5780 Signed-off-by: Stelian Pop <stelian@popies.net>
5782 commit a6cdd21b56014208706238712a853a9e9a0a2290
5783 Author: Stelian Pop <stelian@popies.net>
5784 Date: Sat Jan 19 21:09:35 2008 +0000
5786 Fix arm926ejs compile when SKIP_LOWLEVEL_INIT is on
5788 Fix arm926ejs compile when SKIP_LOWLEVEL_INIT is on.
5790 cpu/arm926ejs/start.o: In function `cpu_init_crit':
5791 .../cpu/arm926ejs/start.S:227: undefined reference to `lowlevel_init'
5793 Signed-off-by: Stelian Pop <stelian@popies.net>
5795 commit ea686f52e45b3df2938866d3f5a98bb2556dfe2b
5796 Author: Peter Pearse <peter.pearse@arm.com>
5797 Date: Fri Feb 1 16:50:24 2008 +0000
5799 Fix timer overflow in DaVinci
5800 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
5802 commit f4e7cbfcb0fcbc325a2bcfea7e00e3dd37f93846
5803 Author: Peter Pearse <peter.pearse@arm.com>
5804 Date: Fri Feb 1 16:49:08 2008 +0000
5806 Update board NetStar
5807 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
5809 commit b7f6193e76651e1fd606e46eb11915b53cb6618b
5810 Author: Niklaus Giger <niklaus.giger@netstal.com>
5811 Date: Tue Feb 5 10:26:42 2008 +0100
5813 ppc4xx: HCU4/5. Fix make O=../xx
5815 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
5817 commit 29e3500cbc43c89eff6e720ca83e375deeecd9b3
5818 Author: Larry Johnson <lrj@acm.org>
5819 Date: Tue Jan 22 08:51:59 2008 -0500
5821 ppc4xx: Add CONFIG_4xx_DCACHE compile switch to Denali-core SPD code
5823 Signed-off-by: Larry Johnson <lrj@acm.org>
5825 commit fe891ecf4d187e9d11dde869ed4623af52b54451
5826 Author: Hiroshi Ito <ito@mlb.co.jp>
5827 Date: Thu Jan 31 18:35:04 2008 +0900
5829 NFS Timeout with large files.
5831 Retry to send NFS packet before reaching timeout.
5833 Signed-off-by: Hiroshi Ito <ito@mlb.co.jp>
5835 commit 88f72527f5b89c0905ad5c36cc2ef8d29dd6bbf0
5836 Author: Johannes Stezenbach <js@sig21.net>
5837 Date: Tue Jan 29 00:11:25 2008 +0100
5839 Add dependencies to avoid race conditions with parallel make.
5841 Signed-off-by: Johannes Stezenbach <js@sig21.net>
5843 commit 6d1b6f9f89c815eaca44acff8e73ece7181f61b6
5844 Author: Mike Frysinger <vapier@gentoo.org>
5845 Date: Mon Jan 28 05:46:01 2008 -0500
5847 Mark board_init_[fr] as noreturn
5849 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
5851 commit 161b2af4d7b48fd602ce333c355a4df0337892bb
5852 Author: Mike Frysinger <vapier@gentoo.org>
5853 Date: Mon Jan 28 05:28:50 2008 -0500
5855 Only use TEXT_BASE if defined by the board
5857 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
5859 commit 1b769881750030f10743808b9d6013e11f559350
5860 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5861 Date: Fri Jan 25 07:54:47 2008 +0100
5863 Fix remaining CONFIG_COMMANDS
5868 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5870 commit 0c9d42e6b0b83d507335a291e3ea99240038f4b9
5871 Author: Niklaus Giger <niklaus.giger@netstal.com>
5872 Date: Mon Jan 21 16:46:00 2008 +0100
5874 Add *~ to .gitignore
5876 One should never add a backup file ending in with ~ to the git repository.
5878 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
5880 commit 3cfb0c51b2bb5ede54eca85ace5b1ba12be314b0
5881 Author: Kumar Gala <galak@kernel.crashing.org>
5882 Date: Thu Jan 17 00:02:10 2008 -0600
5884 Remove duplicate defines for ARRAY_SIZE
5886 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5888 commit c77ce474b1c57b13e9d36d9830f147966c143694
5889 Author: Stelian Pop <stelian@popies.net>
5890 Date: Mon Jan 14 22:08:14 2008 +0100
5892 Fix incorrect address test in AT91F_DataflashSelect().
5894 Signed-off-by: Stelian Pop <stelian@popies.net>
5896 commit d9ad115bbf7bb0842de7dbd2502b7e430f83cc3d
5897 Author: Kumar Gala <galak@kernel.crashing.org>
5898 Date: Wed Feb 13 15:09:58 2008 -0600
5900 Fix building of fdt_support.c if DEBUG set
5902 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5904 commit ccd6e1464e5396bc1a9aebf7077ddf4342eafe03
5905 Author: Jon Loeliger <jdl@freescale.com>
5906 Date: Tue Feb 12 14:53:28 2008 -0600
5908 Add CFG_MPC86xx_DDR_ADDR and CFG_MPC86xx_DDR2_ADDR symbols
5910 These replace direct structure references for IMMR sections.
5912 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5914 commit c62776be8dca4097ca03d4f9415f08d4887b45d0
5915 Author: Wolfgang Denk <wd@denx.de>
5916 Date: Tue Feb 12 00:45:06 2008 +0100
5918 Get rid of "#undef DEBUG" from board config files.
5920 Signed-off-by: Wolfgang Denk <wd@denx.de>
5922 commit 73bf1e2de7862bcdbd5a9f993b3e84b67c8ea9c8
5923 Author: Timur Tabi <timur@freescale.com>
5924 Date: Tue Jan 15 17:09:41 2008 -0600
5926 Remove #undef DEBUG from MPC83xx board header files
5928 Remove the "#undef DEBUG" line from all Freescale 83xx board header files.
5929 The inclusion of this line makes it impossible to enable debug code in
5930 other source files, because "#define DEBUG" typically needs to be defined
5931 before any header files are included.
5933 Signed-off-by: Timur Tabi <timur@freescale.com>
5935 commit 69018ce2e086e9caf35b914d675b82bc4888f077
5936 Author: Kumar Gala <galak@kernel.crashing.org>
5937 Date: Thu Jan 17 08:25:45 2008 -0600
5939 QE: Move FDT support into a common file
5941 Move the flat device tree setup for QE related devices into
5942 a common file shared between 83xx & 85xx platforms that have QE's.
5944 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5946 commit 5cf746c303710329f8040d9c62ee354313e3e91f
5947 Author: Marian Balakowicz <m8@semihalf.com>
5948 Date: Thu Jan 31 13:59:09 2008 +0100
5950 [new uImage] Move kernel data find code to get_kernel() routine
5952 Verification of the kernel image (in old format) and finding kernel
5953 data is moved to a dedicated routine. The routine will also hold
5954 support for, to be added, new image format.
5956 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
5958 commit 7b325454fd231d4273de3fe373850f777fb086bf
5959 Author: Marian Balakowicz <m8@semihalf.com>
5960 Date: Thu Jan 31 13:58:20 2008 +0100
5962 [new uImage] Cleanup FDT handling in PPC do_boot_linux()
5964 Move FDT blob finding and relocation to a dedicated
5965 get_fdt() routine. It increases code readability and
5966 will make adding support for new uImage format easier.
5968 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
5970 commit b6b0fe6460b7063ac60b9a3531ef210aedb31451
5971 Author: Marian Balakowicz <m8@semihalf.com>
5972 Date: Thu Jan 31 13:58:13 2008 +0100
5974 [new uImage] Cleanup do_botm_linux() boot allocations
5976 This patch moves common pre-boot allocation steps shared between PPC
5977 and M68K to a helper routines:
5980 - get_boot_sp_limit()
5985 - set_clocks_in_mhz()
5987 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
5989 commit ceaed2b1e54ebf14d600e02fef016c8df5cc4d40
5990 Author: Marian Balakowicz <m8@semihalf.com>
5991 Date: Thu Jan 31 13:57:17 2008 +0100
5993 [new uImage] Move ramdisk loading to a common routine
5995 Ramdisk loading code, including initrd_high variable handling,
5996 was duplicated for PPC and M68K platforms. This patch creates
5997 common helper routine that is being called from both platform
5998 do_bootm_linux() routines.
6000 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6002 commit 68d4f05e6b2383a442fb71f80f2a9fbb3d8def68
6003 Author: Marian Balakowicz <m8@semihalf.com>
6004 Date: Thu Jan 31 13:55:53 2008 +0100
6006 [new uImage] Removed dead ramdisk code on microblaze architectures
6008 Microblaze do_bootm_linux() includes ramdisk processing code but
6009 the ramdisk does not get used anywhere later on.
6011 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6013 commit 5ad03eb3854c162684222a718b44c0716ea0db03
6014 Author: Marian Balakowicz <m8@semihalf.com>
6015 Date: Thu Jan 31 13:55:39 2008 +0100
6017 [new uImage] Factor out common image_get_ramdisk() routine
6019 Architecture specific do_bootm_linux() routines share common
6020 ramdisk image processing code. Move this code to a common
6023 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6025 commit d3c5eb6dd1f4ed3c3388386cf1d1bf82aa51d56b
6026 Author: Marian Balakowicz <m8@semihalf.com>
6027 Date: Thu Jan 31 13:20:08 2008 +0100
6029 [new uImage] Move FDT error printing to common fdt_error() routine
6031 FDT error handling in PPC do_bootm_linux() shares the same message format.
6032 This patch moves error message printing to a helper fdt_error() routine.
6034 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6035 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
6037 commit 42b73e8ee00d48004791dea64b8093fb974c57e1
6038 Author: Marian Balakowicz <m8@semihalf.com>
6039 Date: Thu Jan 31 13:20:07 2008 +0100
6041 [new uImage] Factor out common routines for getting os/arch/type/comp names
6043 Move numeric-id to name translation for image os/arch/type/comp header
6044 fields to a helper routines: image_get_os_name(), image_get_arch_name(),
6045 image_get_type_name(), image_get_comp_name().
6047 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6049 commit e99c26694a384221d336f6448c06a57479c0baa4
6050 Author: Marian Balakowicz <m8@semihalf.com>
6051 Date: Thu Jan 31 13:20:07 2008 +0100
6053 [new uImage] Remove standalone applications handling from boootm
6055 Standalone applications are supposed to be run using the "go" command.
6056 This patch removes standalone images handling from the do_bootm().
6058 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6060 commit 4a2ad5ff6400698433dd7203d34939c3c9cc9bff
6061 Author: Marian Balakowicz <m8@semihalf.com>
6062 Date: Thu Jan 31 13:20:07 2008 +0100
6064 [new uImage] Remove OF_FLAT_TREE support from PPC bootm code
6066 Support for OF_FLAT_TREE is to be obsoleted in the near future,
6067 remove related code from the bootm routines.
6069 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6071 commit 82850f3d32a2661868ec6876bed7a22c55cef718
6072 Author: Marian Balakowicz <m8@semihalf.com>
6073 Date: Thu Jan 31 13:20:06 2008 +0100
6075 [new uImage] Use image API in SH do_bootm_linux() routine
6077 Introduce image handling API for lately added Hitachi SH architecture.
6079 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6081 commit 4a995edec1ac163d9326d143ffe2b47e7543407f
6082 Author: Marian Balakowicz <m8@semihalf.com>
6083 Date: Thu Jan 31 13:20:06 2008 +0100
6085 [new uImage] Rename architecture specific bootm code files
6087 Implementation of the do_bootm_linux() and other bootm helper routines is
6088 architecture specific code. As such it resides in lib_<arch> directories
6089 in files named <arch>_linux.c
6091 This patch renames those files to a more clear and accurate
6092 lib_<arch>/bootm.c form.
6094 List of the renamed files:
6095 lib_arm/armlinux.c -> lib_arm/bootm.c
6096 lib_avr32/avr32_linux.c -> lib_avr32/bootm.c
6097 lib_blackfin/bf533_linux.c -> lib_blackfin/bootm.c
6098 lib_i386/i386_linux.c -> lib_i386/bootm.c
6099 lib_m68k/m68k_linux.c -> lib_m68k/bootm.c
6100 lib_microblaze/microblaze_linux.c -> lib_microblaze/bootm.c
6101 lib_mips/mips_linux.c -> lib_mips/bootm.c
6102 lib_nios/nios_linux.c -> lib_nios/bootm.c
6103 lib_nios2/nios_linux.c -> lib_nios2/bootm.c
6104 lib_ppc/ppc_linux.c -> lib_ppc/bootm.c
6105 lib_sh/sh_linux.c -> lib_sh/bootm.c
6107 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6109 commit 7582438c285bf0cef82909d0f232de64ec567a8a
6110 Author: Marian Balakowicz <m8@semihalf.com>
6111 Date: Thu Jan 31 13:20:06 2008 +0100
6113 [new uImage] Return error on image move/uncompress overwrites
6115 Check for overwrites during image move/uncompress, return with error
6116 when the original image gets corrupted. Report clear message to the user
6117 and prevent further troubles when pointer to the corrupted images is passed
6118 to do_bootm_linux routine.
6120 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6122 commit f13e7b2e993c61fed1f607962501e051940d6e80
6123 Author: Marian Balakowicz <m8@semihalf.com>
6124 Date: Tue Jan 8 18:12:17 2008 +0100
6126 [new uImage] Cleanup image header pointer use in bootm code
6128 - use single image header pointer instead of a set of auxilliary variables.
6129 - add multi component image helper routines: get component size/data address
6131 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6133 commit 1ee1180b6e93e56d0282ac8d943e448e9d0eab20
6134 Author: Marian Balakowicz <m8@semihalf.com>
6135 Date: Tue Jan 8 18:17:10 2008 +0100
6137 [new uImage] Cleanup cmd_bootm.c
6139 - sort and cleanup headers, declarations, etc.
6140 - group related routines
6141 - cleanup indentation, white spaces
6143 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6145 commit af13cdbc01eaf88880978bfb4f603e012818ba24
6146 Author: Marian Balakowicz <m8@semihalf.com>
6147 Date: Tue Jan 8 18:11:45 2008 +0100
6149 [new uImage] Add memmove_wd() common routine
6151 Move common, watchdog sensible memmove code to a helper memmmove_wd() routine.
6153 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6155 commit 958fc48abddeab513ea4847e34f22a2e9fe67fe1
6156 Author: Marian Balakowicz <m8@semihalf.com>
6157 Date: Tue Jan 8 18:11:44 2008 +0100
6159 [new uImage] Fix FDT header verification in PPC do_boot_linux() routine
6161 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6163 commit 15158971f49255ccef54f0979a942cfd3de2ae52
6164 Author: Marian Balakowicz <m8@semihalf.com>
6165 Date: Tue Jan 8 18:11:44 2008 +0100
6167 [new uImage] Fix uImage header pointer use in i386 do_bootm_linux()
6169 Use image header copy instead of a (possibly corrupted) pointer to
6170 a initial image location.
6172 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6174 commit 261dcf4624b25f3c551efcf8634e9194fabba9c3
6175 Author: Marian Balakowicz <m8@semihalf.com>
6176 Date: Tue Jan 8 18:11:44 2008 +0100
6178 [new uImage] Remove I386 uImage fake_header() routine
6180 I386 targets are not using a uImage format, instead fake header
6181 is added to ram image before it is further processed by bootm.
6183 Remove this fixup and force proper uImage use for I386.
6185 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6187 commit 559316faf7eae0614c91d77f509b57d6c4c091ba
6188 Author: Marian Balakowicz <m8@semihalf.com>
6189 Date: Tue Jan 8 18:11:44 2008 +0100
6191 [new uImage] Move CHUNKSZ definition to image.h
6193 CHUNKSZ defined for PPC and M68K is set to the same value of 64K,
6194 move this definition to a common header.
6196 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6198 commit 321359f20823e0b8c5ad38b64d007a6c48cda16e
6199 Author: Marian Balakowicz <m8@semihalf.com>
6200 Date: Tue Jan 8 18:11:43 2008 +0100
6202 [new uImage] Move gunzip() common code to common/gunzip.c
6204 Move gunzip(), zalloc() and zfree() to a separate file.
6205 Share zalloc() and zfree() with cramfs uncompress routine.
6207 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6209 commit d45d5a18b6b36688f2365623f9d550566c664b5b
6210 Author: Marian Balakowicz <m8@semihalf.com>
6211 Date: Tue Jan 8 18:11:43 2008 +0100
6213 [new uImage] Cleanup OF/FDT #if/#elif/#endif use in do_bootm_linux()
6215 Make CONFIG_OF_LIBFDT and CONFIG_OF_FLAT_TREE use more
6216 readable in PPC variant of do_bootm_linux() routine.
6218 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6220 commit 5d3cc55ecbae277e08f5ff771da20b1d6a36ec36
6221 Author: Marian Balakowicz <m8@semihalf.com>
6222 Date: Tue Jan 8 18:11:43 2008 +0100
6224 [new uImage] Move PPC do_bootm_linux() to lib_ppc/ppc_linux.c
6226 PPC implementation of do_bootm_linux() routine is moved to
6227 a dedicated file lib_ppc/ppc_linux.c
6229 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6231 commit b97a2a0a21f279d66de8a9bdbfe21920968bcb1c
6232 Author: Marian Balakowicz <m8@semihalf.com>
6233 Date: Tue Jan 8 18:14:09 2008 +0100
6235 [new uImage] Define a API for image handling operations
6237 - Add inline helper macros for basic header processing
6238 - Move common non inline code common/image.c
6239 - Replace direct header access with the API routines
6240 - Rename IH_CPU_* to IH_ARCH_*
6242 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6244 commit ed29bc4e8142b46b626f67524207b36e43d9aad6
6245 Author: Marian Balakowicz <m8@semihalf.com>
6246 Date: Thu Jan 31 13:19:58 2008 +0100
6248 Add missing cmd_ximg.o to common/Makefile
6250 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6252 commit 37e3c62fa07a823e7569c872e3a9395d227ed8e3
6253 Author: Grzegorz Bernacki <gjb@semihalf.com>
6254 Date: Mon Jan 28 10:15:02 2008 +0100
6256 ADS5121e: DDR2 init/timing update.
6258 Signed-off-by: John Rigby <jrigby@freescale.com>
6259 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
6261 commit ac9152830d7fdebace8a260b7737ef2870c21ca0
6262 Author: John Rigby <jrigby@freescale.com>
6263 Date: Wed Jan 30 13:36:57 2008 -0700
6267 Changes to match 5121 device tree going mainline in 2.6.25.
6269 Change OF_SOC from "soc5121" to plain "soc".
6270 Remove unneeded "ref-frequency" fixups.
6271 Remove "address" enetaddr fixup.
6273 Add bus-frequency fixup for old OF_SOC so old
6274 kernels with old device trees will work with new
6275 u-boot with 66MHz IPS clock
6277 Signed-off-by: John Rigby <jrigby@freescale.com>
6279 commit de55d18df3ff2ea614624e74793de7c43520e0e7
6280 Author: John Rigby <jrigby@freescale.com>
6281 Date: Wed Jan 30 13:36:56 2008 -0700
6283 Change IPS freq to 66MHz
6285 Recommended frequency is 66MHz
6286 Change divider from 4 to 3.
6288 Signed-off-by: John Rigby <jrigby@freescale.com>
6290 commit cd9cb62f9d8b78d6c3af5d1e9b5a3d68a3d73974
6291 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6292 Date: Mon Jan 14 22:38:55 2008 +0100
6294 xsengine: rename board_post_init to board_late_init
6296 missing migration from "Cleanup of some init functions"
6297 in c837dcb1a316745092567bfe4fb266d0941884ff
6299 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6301 commit 8dafa87476b0d7170e219c2f5e3842c833a91807
6302 Author: Larry Johnson <lrj@acm.org>
6303 Date: Sat Jan 12 23:35:33 2008 -0500
6305 Add attribute POST_PREREL to ECC memory POST
6307 Signed-off-by: Larry Johnson <lrj@acm.org>
6309 commit ed2cf548cac80cd3cf8154dcfe7b2685bef45938
6310 Author: Kumar Gala <galak@kernel.crashing.org>
6311 Date: Thu Jan 17 08:25:45 2008 -0600
6313 QE: Move FDT support into a common file
6315 Move the flat device tree setup for QE related devices into
6316 a common file shared between 83xx & 85xx platforms that have QE's.
6318 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6320 commit d38da537943cd36356b9d3d9d9b60533554b81d8
6321 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6322 Date: Wed Jan 23 17:20:14 2008 +0100
6324 AVR32: Make SDRAM refresh rate configurable
6326 The existing code assumes the SDRAM row refresh period should always
6327 be 15.6 us. This is not always true, and indeed on the ATNGW100, the
6328 refresh rate should really be 7.81 us.
6330 Add a refresh_period member to struct sdram_info and initialize it
6331 properly for both ATSTK1000 and ATNGW100. Out-of-tree boards will
6332 panic() until the refresh_period member is updated properly.
6334 Big thanks to Gerhard Berghofer for pointing out this issue.
6336 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6338 commit 61151cccb660cdb06a07fb283de6089913d7bde0
6339 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6340 Date: Thu Apr 19 10:10:11 2007 +0200
6342 ATSTK1000: Fix potential flash programming bug
6344 The (now obsolete) atngw100 flash programming code was having problems
6345 programming the onboard at49bv642 chip. The atstk1000 flash
6346 programming code may have the same bug, so import fix for this problem
6347 from the AVR32 Linux BSP.
6349 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6351 commit b2e1d5b64469f10dfcce27f7b0afd935684a8e11
6352 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6353 Date: Thu Nov 22 17:04:13 2007 +0100
6355 ATSTK1004: Fix comment about default load address
6357 The default load address is SDRAM + 2MB, not SDRAM + 4MB. The latter
6358 wouldn't have worked anyway since the board can only access 4MB of
6361 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6363 commit 8269ab53608d8db2aa06969c337ab0b0518211e5
6364 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6365 Date: Thu Nov 22 17:01:24 2007 +0100
6367 ATSTK1002: Use SDRAM + 4MB as default load address
6369 Many people run into problems when they compile a big kernel and load
6370 the uImage at the default SDRAM + 2MB address as the kernel will
6371 overwrite the uImage as it is being unpacked. Increase the default
6372 load address so that we can load a 4MB kernel image without any
6375 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6377 commit 2bcacc2d841b77f3d2d3910db722003742727e9f
6378 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6379 Date: Thu Nov 22 16:51:39 2007 +0100
6381 ATNGW100: Fix default mtest range
6383 Let mtest cover the whole SDRAM except the last megabyte, which is
6386 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6388 commit 9856a6b3104e0bc210b0868dfe691c52bf03c227
6389 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
6390 Date: Tue Jan 22 15:31:56 2008 +0900
6392 sh: Fix register address of SH7722.
6394 The address of SH7722 is wrong by old document.
6395 This patch fixes this problem.
6397 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
6399 commit 30942b18b66f35f2ceedab39af10e9eccaa943cc
6400 Author: Mike Frysinger <vapier@gentoo.org>
6401 Date: Mon Feb 4 19:26:57 2008 -0500
6403 new command for displaying strings at specified memory locations
6405 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6407 commit b58d8b48e25b0c866d167cc577f118f528cd9e0a
6408 Author: Mike Frysinger <vapier@gentoo.org>
6409 Date: Mon Feb 4 19:26:57 2008 -0500
6411 rewrite/cleanup Blackfin RTC driver
6413 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6415 commit 94a91e248b71c3ff951fc27cff6909e82ca37d15
6416 Author: Mike Frysinger <vapier@gentoo.org>
6417 Date: Mon Feb 4 19:26:57 2008 -0500
6419 generate u-boot.ldr for Blackfin targets
6421 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6423 commit b779f7a59530436040f157f7841db7ab796542df
6424 Author: Mike Frysinger <vapier@gentoo.org>
6425 Date: Mon Feb 4 19:26:57 2008 -0500
6427 scrub unused symbols
6429 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6431 commit cc2977acc3bbbb7850f16645dd1081f95335868d
6432 Author: Mike Frysinger <vapier@gentoo.org>
6433 Date: Mon Feb 4 19:26:57 2008 -0500
6435 move Blackfin cpu object list to respective cpu directories
6437 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6439 commit d0b01a246d0a351bc7dce1d0c9cf6aebdf6d7505
6440 Author: Mike Frysinger <vapier@gentoo.org>
6441 Date: Mon Feb 4 19:26:57 2008 -0500
6443 interface to Blackfin on-chip One-Time-Programmable memory
6445 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6447 commit 4c727c77e43872d3a1d1f76a949fcb3f26a38788
6448 Author: Mike Frysinger <vapier@gentoo.org>
6449 Date: Mon Feb 4 19:26:56 2008 -0500
6451 add support for memory commands with Blackfin L1 instruction memory
6453 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6455 commit 6b9097e5e7490aa7b828c6f1a1c7a0e875df8464
6456 Author: Mike Frysinger <vapier@gentoo.org>
6457 Date: Mon Feb 4 19:26:56 2008 -0500
6459 use C code rather than inline assembly
6461 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6463 commit 97c26e006d2fa6d4e1560933ee6f385d8b8908b9
6464 Author: Mike Frysinger <vapier@gentoo.org>
6465 Date: Mon Feb 4 19:26:56 2008 -0500
6467 add Blackfin-specific reginfo command
6469 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6471 commit 0858b835e7ea501ea084d34cef75932f098342bb
6472 Author: Mike Frysinger <vapier@gentoo.org>
6473 Date: Mon Feb 4 19:26:55 2008 -0500
6475 add support for Blackfin symbol prefixes to examples
6477 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6479 commit 8dc48d71a4be753ea9f84956cd33600de35fad04
6480 Author: Mike Frysinger <vapier@gentoo.org>
6481 Date: Mon Feb 4 19:26:55 2008 -0500
6483 add Blackfin-specific bdinfo command
6485 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6487 commit 0003613e3c7df3b84b2cb92e797d77f46f15a43a
6488 Author: Mike Frysinger <vapier@gentoo.org>
6489 Date: Mon Feb 4 19:26:55 2008 -0500
6491 move -ffixed-P5 to blackfin_config.mk and drop unused -D__BLACKFIN__
6493 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6495 commit 60fa72d65610c7ef33e1d6db858979d05ff0df58
6496 Author: Mike Frysinger <vapier@gentoo.org>
6497 Date: Mon Feb 4 19:26:55 2008 -0500
6499 unify the Blackfin board targets
6501 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6503 commit d4d7730853e5d675f76ec666807da3028c91d592
6504 Author: Mike Frysinger <vapier@gentoo.org>
6505 Date: Mon Feb 4 19:26:55 2008 -0500
6507 punt Blackfin VDSP headers and import sanitized/auto-generated ones
6509 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6511 commit 6cfcce67671a3425229d66203386fa3cbd0cc3bd
6512 Author: Mike Frysinger <vapier@gentoo.org>
6513 Date: Mon Feb 4 19:26:54 2008 -0500
6515 always pull in asm/blackfin.h for Blackfin ports
6517 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6519 commit bf53974c2ddae678d7660f2b5ccfeb0732b6f5dc
6520 Author: Mike Frysinger <vapier@gentoo.org>
6521 Date: Mon Feb 4 19:26:54 2008 -0500
6523 add missing __raw versions of Blackfin read/write io functions
6525 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6527 commit 24e02d0fd3acc50e73e1a3cdd567f0a77946f15d
6528 Author: Mike Frysinger <vapier@gentoo.org>
6529 Date: Mon Feb 4 19:26:54 2008 -0500
6531 add the default Blackfin logo used by Blackfin boards with splash screens
6533 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6535 commit 4c58eb5552220e425c8af6ac8d2839244a2f57b1
6536 Author: Mike Frysinger <vapier@gentoo.org>
6537 Date: Mon Feb 4 19:26:54 2008 -0500
6539 add some more Blackfin docs
6541 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6543 commit 32a9f5f2160a034ea87ea651b233ef7c635e55cf
6544 Author: Mike Frysinger <vapier@gentoo.org>
6545 Date: Mon Feb 4 19:26:54 2008 -0500
6547 make smc91111_eeprom managment simpler by depending on the board configuration file rather than a hardcoded list of boards
6549 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6551 commit 4087bc88cebec75c432a7fe9f6afb545b0919831
6552 Author: Mike Frysinger <vapier@gentoo.org>
6553 Date: Mon Feb 4 19:26:54 2008 -0500
6555 fix building on Blackfin as the assembler supports the .set syntax, not the = syntax, for assigning symbols
6557 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6559 commit b45264ee85cbd92020640a32e02fb434fd557108
6560 Author: Mike Frysinger <vapier@gentoo.org>
6561 Date: Mon Feb 4 19:26:53 2008 -0500
6563 add gitignores for Blackfin pieces
6565 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6567 commit a93907c43f847f076dd0e34ee3b69b5e8e6d0d29
6568 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6569 Date: Fri Jan 18 01:14:03 2008 +0100
6571 TFTP: add host ip addr support
6573 allow to use a different server as set in serverip
6574 add CONFIG_TFTP_FILE_NAME_MAX_LEN to configure the file name length
6575 if not defined the max length will be at 128
6577 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6579 commit e56b4b494cd92def577969f9678395aa22d34c9f
6580 Author: Timur Tabi <timur@freescale.com>
6581 Date: Wed Jan 9 14:35:26 2008 -0600
6583 85xx,86xx: Determine I2C clock frequencies and store in global_data
6585 Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.
6587 Update the get_clocks() function in 85xx and 86xx to determine the I2C
6588 clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.
6590 Signed-off-by: Timur Tabi <timur@freescale.com>
6592 commit 7ec8bb15ee368ea54d48d64867767a704d9ab4c2
6593 Author: Wolfgang Denk <wd@denx.de>
6594 Date: Thu Dec 27 10:56:54 2007 +0100
6596 OMAP5912: fix FIFO handling in UART driver
6598 According to the OMAP5912 Serial Interfaces Reference Guide (see
6599 http://focus.ti.com/lit/ug/spru760c/spru760c.pdf, page 150), the
6600 FIFO_EN enable bit in the FIFO Control Register (FCR) can only be
6601 changed when the baud clock is not running, i. e. when both DLL and
6604 Thus make sure that DLL and DLH are 0 when writing the FCR.
6606 Signed-off-by: Wolfgang Denk <wd@denx.de>
6608 commit 16158778b5f52f201e95ded2d2d9084b0ed5670d
6609 Author: Harald Welte <laforge@openmoko.org>
6610 Date: Wed Dec 19 15:10:52 2007 +0100
6612 ARM: S3C24x0 SoC NAND controller support
6614 This patch adds NAND support to the S3C24x0 SoC code in u-boot
6616 Signed-off-by: Harald Welte <laforge@openmoko.org>
6618 commit a7c185ed3d9f8ebd85cfc286e1ffee72e4803163
6619 Author: Harald Welte <laforge@openmoko.org>
6620 Date: Wed Dec 19 14:24:40 2007 +0100
6622 ARM: s3c24xx: Multiple serial port support
6624 This patch adds support for CONFIG_SERIAL_MULTI on s3c24x0 CPU's
6626 Signed-off-by: Harald Welte <laforge@openmoko.org>
6628 commit a25f72f1f73a11de68251fb88c89991e202e68fa
6629 Author: Harald Welte <laforge@openmoko.org>
6630 Date: Wed Dec 19 14:16:57 2007 +0100
6632 ARM: arm920t: Allow use of 'gd' pointer from IRQ
6634 This patch allows us to use the 'gd' pointer (and thus environment
6635 and everything else associated with it) from interrupt context on
6638 Signed-off-by: Harald Welte <laforge@openmoko.org>
6640 commit be19bd5cd0f454b63298844a0b5377e029b2caad
6641 Author: Harald Welte <laforge@openmoko.org>
6642 Date: Wed Dec 19 14:19:38 2007 +0100
6644 ARM: arm920/s3c24xx: IRQ demulitplexer callback
6646 This patch adds a IRQ demultiplexer callback to the arm920 cpu core code,
6647 plus a stub implementation of it for the S3C2410.
6649 The purpose is to allow arm920t implementations such as the s3c24x0 to
6650 implement interrupt handlers in u-boot without having to touch core
6653 Signed-off-by: Harald Welte <laforge@openmoko.org>
6655 commit a41dbbd98d201d8aea31b5d21df4742c20cd7eda
6656 Author: Hebbar <gururajakr@sanyo.co.in>
6657 Date: Tue Dec 18 16:03:07 2007 -0800
6659 ARM: Display Ethernet info in do_bdinfo only if CONFIG_CMD_NET is defined
6661 Add ifdef to bdinfo command to display ethernet information
6662 only if CONFIG_CMD_NET is defined for arm modules.
6664 Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in>
6666 commit f7ad79b6f9f0f45437b62e19b45356cc2aaf4884
6667 Author: Hebbar <gururajakr@sanyo.co.in>
6668 Date: Tue Dec 18 16:00:54 2007 -0800
6670 ARM: add I2C init function call in lib_arm/board.c
6672 Adds I2C init func call to init sequence for ARM boards. This is
6673 present in ppc,blackfin and other processor init sequence.
6675 Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in>
6677 commit ff02f139804f3cb61414f7bbcbfdaa0279e3efae
6678 Author: Stefan Roese <sr@denx.de>
6679 Date: Fri Feb 1 09:38:29 2008 +0100
6681 ppc4xx: Fix ndfc HW ECC byte order
6683 The current ndfc HW ECC implementation swaps the first two ECC bytes.
6684 But the 4xx NDFC already uses the SMC (Smart Media Card) ECC ordering,
6685 so this swapping in the HW ECC driver is bogus. This patch fixes this
6686 problem and now really uses the SMC ECC byte order.
6688 Thanks to Sean MacLennan for pointing this out.
6690 Signed-off-by: Stefan Roese <sr@denx.de>
6692 commit e1d1429b49b0ee58c80f8c7b29c1ebaf8be7f5f1
6693 Author: Stefan Roese <sr@denx.de>
6694 Date: Wed Jan 30 15:35:50 2008 +0100
6696 ppc4xx: Fix GPIO configuration for pcs440ep
6698 The SRD0_PFC0 register was not configured correctly to enable the GPIO's
6699 49-63 for GPIO. They have been configured as trace signals. This patch
6700 fixes this by clearing the corresponding bit.
6702 Signed-off-by: Stefan Roese <sr@denx.de>
6704 commit 28d77d968bfe0316deb5bf15c17f57d5ff2c8821
6705 Author: Stefan Roese <sr@denx.de>
6706 Date: Wed Jan 30 14:48:28 2008 +0100
6708 ppc4xx: Fix problem with init-ram bigger than 4k on 440 platforms
6710 Signed-off-by: Stefan Roese <sr@denx.de>
6712 commit 4fedfddf97461b88668b9aec774dfb7a0c6dc368
6713 Author: Ladislav Michl <ladis@linux-mips.org>
6714 Date: Fri Dec 7 00:42:32 2007 +0100
6716 ARM: Board voiceblue update
6718 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
6720 commit 2c5260f711168d5ee91c70ddbb7d897013eefc46
6721 Author: Ladislav Michl <ladis@linux-mips.org>
6722 Date: Thu Dec 6 23:24:57 2007 +0100
6724 ARM: AT91RM9200 based boards config cleanup
6726 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
6728 Remove nowhere used struct bd_info_ext, remove trailing whitespaces, fix
6731 commit 481f28b1db5cd21deb55f69399ba240e107af4c7
6732 Author: Ladislav Michl <ladis@linux-mips.org>
6733 Date: Thu Dec 6 22:59:16 2007 +0100
6735 ARM: Fix at91rm9200dk base address
6737 Somewhere during development of U-Boot-1.1.3 CONFIG_BOOTBINFUNC was
6738 renamed into CONFIG_INIT_CRITICAL which was 04 Apr 2005 replaced
6739 with CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT.
6740 However CONFIG_SKIP_LOWLEVEL_INIT has oposite meaning to
6741 CONFIG_BOOTBINFUNC, so fix configuration to reflect this fact.
6742 I'm sending this patch 4th (!) time in hope it produces at least some
6745 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
6747 Fix at91rm9200dk base and environment address.
6749 commit c95219fae2a7add7daa2f91aedca65b1698465c7
6750 Author: stefano babic <sbabic@denx.de>
6751 Date: Tue Nov 20 10:40:24 2007 +0100
6753 MMC for PXA 27X (resubmit)
6755 MMC support for X_Scale PXA is broken and does not work.
6756 Mainly, the mmc_init() function cannot recognize current SD/MMC cards.
6757 There were already some patches around the world but none of them was
6758 merged into the official u-boot tree.
6760 This patch makes order fixing this issue. Resubmit after code cleanup.
6762 Applied and tested on PXA 270 (TrizepsIV module).
6764 Signed-off-by: Stefano Babic <sbabic@denx.de>
6766 commit 96bbfa1e6625ce23a150936863b3ecf4c853eb33
6767 Author: stefano babic <sbabic@denx.de>
6768 Date: Tue Nov 20 10:37:04 2007 +0100
6770 Fix gcc issues in pxa-regs.h
6772 Fix gcc4 issue. With some toolchain, a previous patch that fixes gcc4
6773 issues generates wrong code.
6774 (Problem was reported with gcc-4.0.2-glibc-2.3.6/arm-softfloat-linux-gnu).
6775 This patch fixes the problem and solves the gcc-4 issues as the linux
6778 Signed-off-by: Stefano Babic <sbabic@denx.de>
6779 Signed-off-by: Dmitry Ivanov <ivadmitry@gmail.com>
6781 commit 7047b388876e7b905b2ec4edb8010543e3641b85
6782 Author: Jens Gehrlein <sew_s@tqs.de>
6783 Date: Tue Jan 29 08:45:03 2008 +0100
6785 TQM834x: enable DHCP
6787 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
6788 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6790 commit a877004d44ca7dbc1e618add3eeb1da7c84e4bec
6791 Author: Jens Gehrlein <sew_s@tqs.de>
6792 Date: Tue Jan 29 08:45:02 2008 +0100
6794 TQM834x: support for Spansion N-type Flashes (sector size = 256 KiB at 2x16 Bit).
6796 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
6797 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6799 commit 8931ab176025b03cfc320b3fd1eca432a88ed560
6800 Author: Ben Warren <biggerbadderben@gmail.com>
6801 Date: Sat Jan 26 23:41:19 2008 -0500
6803 Fix conditional compilation of mpx8xxx_spi driver
6805 This driver should only compile if CONFIG_MPC8XXX_SPI is set
6807 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
6808 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6810 commit 63f732d3d3880feb531f48af247c025bf01462b0
6811 Author: Rafal Jaworowski <raj@semihalf.com>
6812 Date: Tue Jan 29 17:00:34 2008 +0100
6814 API: Provide dummy halt() in the glue layer.
6816 This fixes a demo app link failure on platforms configured with CONFIG_PANIC_HANG.
6818 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
6820 commit 0dc1fc22af86d16993388d9ed9630dbaa2d51826
6821 Author: Rafal Jaworowski <raj@semihalf.com>
6822 Date: Tue Jan 29 16:57:38 2008 +0100
6824 API: Convert conditional building to the new scheme.
6826 This fixes a build breakage with CONFIG_API enabled, which appeared after
6827 the recent changes in the U-Boot build system.
6829 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
6831 commit 98b742489c09780be6a832eeaa4e5eff824792bb
6832 Author: Wolfgang Denk <wd@denx.de>
6833 Date: Fri Jan 25 09:56:17 2008 +0100
6835 inka4x0: remove dead code
6837 Signed-off-by: Wolfgang Denk <wd@denx.de>
6839 commit 4f93f8b1a4d35b6d302842132edba920ef8f62aa
6840 Author: Becky Bruce <becky.bruce@freescale.com>
6841 Date: Wed Jan 23 16:31:06 2008 -0600
6843 86xx: Add reginfo command
6845 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
6847 commit ddcebcb638715a6278da93b553d5016f99823816
6848 Author: Becky Bruce <becky.bruce@freescale.com>
6849 Date: Wed Jan 23 16:31:05 2008 -0600
6851 86xx: Add print_laws function to fsl_law.c
6853 This can be used for debug, and will be used by board code
6854 to help implement reginfo.
6856 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
6858 commit 9cd32426f26a0567bb61f339edd83c6a2ce9bfc3
6859 Author: Becky Bruce <becky.bruce@freescale.com>
6860 Date: Wed Jan 23 16:31:04 2008 -0600
6862 86xx: Remove old-style law setup code
6864 This includes mpc8610hpcd, mpc8641hpcn, and sbc8641d.
6866 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
6868 commit 713d8186649dae874613d495b0cecaa039a98b30
6869 Author: Becky Bruce <becky.bruce@freescale.com>
6870 Date: Wed Jan 23 16:31:03 2008 -0600
6872 86xx: Convert sbc8641d to use new law setup code.
6874 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
6876 commit 031976f6364b93833e989f57e9f1e023e0be8c4c
6877 Author: Becky Bruce <becky.bruce@freescale.com>
6878 Date: Wed Jan 23 16:31:02 2008 -0600
6880 86xx: Convert mpc8610hpcd to new law setup method.
6882 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
6884 commit 4933b91f8a49e436681f163df3173beb91cac44a
6885 Author: Becky Bruce <becky.bruce@freescale.com>
6886 Date: Wed Jan 23 16:31:01 2008 -0600
6888 86xx: Support new law setup method and convert mpc8641
6890 Adds the support code in cpu/mpc86xx for the new law setup code
6891 recently created fsl_law.c, and changes the MPC8641HPCN config
6894 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
6896 commit 1a41f7ce9c086e208c0eabf52565a237af2a2bd1
6897 Author: Becky Bruce <becky.bruce@freescale.com>
6898 Date: Wed Jan 23 16:31:00 2008 -0600
6900 86xx: Rearrange the sequence in start.S
6902 * split the BAT initialization so that only 2 BATs (for the boot page
6903 and stack) are programmed very early on. The rest are initialized later.
6904 * Move other BAT setup, ccsrbar setup, and law setup later in the code
6905 after translation has been enabled.
6907 These changes will facilitate the moving of law and BAT initialization
6908 to C code, and will aid with 36-bit physical addressing support.
6910 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
6912 commit 33dac03b1b5d61e4fed7bad445ba40b4c97feba0
6913 Author: Wolfgang Denk <wd@denx.de>
6914 Date: Wed Jan 23 14:41:37 2008 +0100
6916 Coding Style Cleanup; update CHANGELOG
6918 Signed-off-by: Wolfgang Denk <wd@denx.de>
6920 commit 865f0f9754b95183cad395de7e8cb85df0c6ea1f
6921 Author: Wolfgang Denk <wd@denx.de>
6922 Date: Wed Jan 23 14:31:17 2008 +0100
6924 Coding Style Cleanup; update CHANGELOG
6926 Signed-off-by: Wolfgang Denk <wd@denx.de>
6928 commit cfe5ca77976afdbe7ecb86e39fd7505bde636ace
6929 Author: Dave Liu <r63238@freescale.com>
6930 Date: Fri Jan 18 10:07:04 2008 +0800
6932 mpc83xx: Correct the struct spi8xxx in mpc8xxx_spi.h
6934 The commit 04a9e1180ac76a7bacc15a6fcd95ad839d65bddb
6935 cause the 83xx immap broken, so the DMA and PCI will
6938 The patch fix the struct spi8xxx and rm struct spi83xx.
6940 Signed-off-by: Dave Liu <daveliu@freescale.com>
6941 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6943 commit 6b4439444286e0fcd01596df504e6ca897ad3e5a
6944 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6945 Date: Sat Apr 14 17:11:49 2007 +0200
6947 AVR32: ATNGW100 board support
6949 Add support for the ATNGW100 Network Gateway reference design,
6950 including flash, ethernet and MMC support.
6952 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6954 commit e006927a0b9a54e8ee7685d8ac748aaad6801862
6955 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
6956 Date: Sat Nov 24 18:15:31 2007 +0100
6958 AVR32: Initialize ipaddr, loadaddr and bootfile at startup
6960 I don't know why the relevant layers can't do this by itself, but this
6963 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
6965 commit 799891ef7b1b3432032ec23466df6b665a797fa4
6966 Author: Michael Schwingen <michael@schwingen.org>
6967 Date: Fri Jan 18 00:04:28 2008 +0100
6969 Add AcTux board support
6973 The patch adds 4 boards, called AcTux-1 .. AcTux-4. This patch contains the
6975 contain changes for multiple boards, the board-specific files follow as
6978 Signed-off-by: Michael Schwingen <michael@schwingen.org>
6980 commit 66a4344a4d910a11125df7768899ad529719855e
6981 Author: Michael Schwingen <michael@schwingen.org>
6982 Date: Wed Jan 16 19:53:23 2008 +0100
6984 add AcTux-4 board support
6986 Signed-off-by: Michael Schwingen <michael@schwingen.org>
6988 commit bc24345e4101a5c996d6b48ce497b09c53025dc6
6989 Author: Michael Schwingen <michael@schwingen.org>
6990 Date: Wed Jan 16 19:51:55 2008 +0100
6992 add AcTux-3 board support
6994 Signed-off-by: Michael Schwingen <michael@schwingen.org>
6996 commit aebf00fc4d1343b24715373893f7b20bf462d1e9
6997 Author: Michael Schwingen <michael@schwingen.org>
6998 Date: Wed Jan 16 19:51:14 2008 +0100
7000 add AcTux-2 board support
7002 Signed-off-by: Michael Schwingen <michael@schwingen.org>
7004 commit ea99e8f05b7240fd657739e286664664ae160abe
7005 Author: Michael Schwingen <michael@schwingen.org>
7006 Date: Wed Jan 16 19:50:37 2008 +0100
7008 add AcTux-1 board support
7010 Signed-off-by: Michael Schwingen <michael@schwingen.org>
7012 commit 3d9f3bfb7a33efe8e41e01b025563cd712c57d64
7013 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7014 Date: Mon Jan 14 19:20:08 2008 +0100
7016 ARM: remove useless function board_post_init
7018 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7020 commit 96bd462942022e4569b582c072a0ed26de1cd19b
7021 Author: Michael Schwingen <michael@schwingen.org>
7022 Date: Thu Jan 10 14:59:46 2008 +0100
7026 enables the RTS signal with CONFIG_SERIAL_RTS_ACTIVE.
7027 No handshaking is done, but the active RTS signal allows to
7028 connect to the target using a PC which is using RTS/CTS
7029 handshake, and does no harm if the PC is set to ignore RTS.
7031 Signed-off-by: Michael Schwingen <michael@schwingen.org>
7033 commit a1cf027a08f9dc1c0e769499e6f4fbddcf9cab93
7034 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7035 Date: Mon Jan 7 08:41:34 2008 +0100
7037 IXP: add dynamic microcode addr
7039 allow to load the microde from flash or ram by download it through
7040 the serial or other.
7042 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7043 Acked-by: Stefan Roese <sr@denx.de>
7045 commit 63ebcc4615dd39926ccf61f1d5f3510262ef6564
7046 Author: Michael Schwingen <michael@schwingen.org>
7047 Date: Sat Nov 10 15:44:12 2007 +0100
7049 load ixp42x NPE firmware from separate flash block, remove dead code
7053 the following patch adds support to move the IXP42X NPE firmware to a
7054 separate flash block, whose start address is defined in
7055 CONFIG_IXP4XX_NPE_EXT_UCODE_BASE. Using that, it is possible to build
7056 NPE-enabled u-boot without copyright problems due to the NPE firmware.
7058 I hope the patch applies, I get whitespace-related differences in the NPE
7059 files due to trailing whitespace in the original versions.
7061 Signed-off-by: Michael Schwingen <michael@schwingen.org>
7062 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7064 commit 57a127201eb3d8cc19170a008e0bd7af608bd72f
7065 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7066 Date: Tue Jan 15 14:15:46 2008 -0600
7068 ColdFire: MCF547x_8x - Add M5475EVB and M5485EVB support
7070 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7071 Signed-off by: John Rigby <jrigby@freescale.com>
7073 commit 1aee111135d8660a164d4f6bf7d66b032ea535cf
7074 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7075 Date: Tue Jan 15 14:02:49 2008 -0600
7077 ColdFire: MCF547x_8x - Add M547xEVB and M548xEVB board
7079 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7080 Signed-off by: John Rigby <jrigby@freescale.com>
7082 commit 777d1abd9796f1c2e148417cc10657e847d318ce
7083 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7084 Date: Tue Jan 15 14:00:25 2008 -0600
7086 ColdFire: Add MCF547x_8x FEC driver
7088 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7089 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7090 Signed-off by: John Rigby <jrigby@freescale.com>
7092 commit 72f56adc0b25d43875ad067bae6be1bcea86b79f
7093 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7094 Date: Tue Jan 15 13:54:09 2008 -0600
7096 ColdFire: Add MCF547x_8x dma code and header files
7098 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7099 Signed-off by: John Rigby <jrigby@freescale.com>
7101 commit ce09fc49b56ea3c442794b6be9b7db4b99dfdc87
7102 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7103 Date: Tue Jan 15 13:52:03 2008 -0600
7105 ColdFire: Add MCF547x_8x dma code - 2
7107 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7108 Signed-off by: John Rigby <jrigby@freescale.com>
7110 commit 11865ea844e7154fd30c7e2860da4eed4a12ad1f
7111 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7112 Date: Tue Jan 15 13:48:52 2008 -0600
7114 ColdFire: Add MCF547x_8x dma code - 1
7116 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7117 Signed-off by: John Rigby <jrigby@freescale.com>
7119 commit 4621fc3fe7cd65b78b3cbd31f65c9f7f72b22bd3
7120 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7121 Date: Tue Jan 15 13:39:44 2008 -0600
7123 ColdFire: Add MCF547x_8x related header files
7125 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7126 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7127 Signed-off by: John Rigby <jrigby@freescale.com>
7129 commit 570c0186aecab1b747b2d44d0e1d3c1ac4cb27f5
7130 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7131 Date: Tue Jan 15 13:37:34 2008 -0600
7133 ColdFire: Add MCF547x_8x cpu arch
7135 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7136 Signed-off by: John Rigby <jrigby@freescale.com>
7138 commit e2756f4b54aba0e0523b81dd145666829cf7fd59
7139 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7140 Date: Mon Jan 14 17:47:23 2008 -0600
7142 ColdFire: Add MCF5227x cpu and M52277EVB support-3
7144 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7145 Signed-off by: John Rigby <jrigby@freescale.com>
7147 commit c87581027994c148131b2f11aa75501f782ec19a
7148 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7149 Date: Mon Jan 14 17:46:19 2008 -0600
7151 ColdFire: Add MCF5227x cpu and MCF52277EVB support-2
7153 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7154 Signed-off by: John Rigby <jrigby@freescale.com>
7156 commit 1552af70ecab11b9f3dceff7528ed15faf678b9d
7157 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7158 Date: Mon Jan 14 17:43:33 2008 -0600
7160 ColdFire: Add MCF5227x cpu and M52277EVB support-1
7162 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7163 Signed-off by: John Rigby <jrigby@freescale.com>
7165 commit 397b7b81a1f1008798ae1206913508cc89cb3a7d
7166 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7167 Date: Mon Jan 14 17:35:44 2008 -0600
7169 ColdFire: Fix CFI Flash low level Read/Write macro
7171 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7172 Signed-off by: John Rigby <jrigby@freescale.com>
7174 commit aa5f1f9dc815a76f6dffb580798599c028fe7feb
7175 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7176 Date: Mon Jan 14 17:23:08 2008 -0600
7178 ColdFire: Add M5373EVB platform support - 2
7180 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7181 Signed-off by: John Rigby <jrigby@freescale.com>
7183 commit 1ac559d4aa358f63b48c62b564224c06feeb4e36
7184 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7185 Date: Mon Jan 14 17:19:54 2008 -0600
7187 ColdFire: Add M5373EVB platform support - 1
7189 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7190 Signed-off by: John Rigby <jrigby@freescale.com>
7192 commit 320d61991fa3190ee41765601ed017b6b5ff7b2b
7193 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7194 Date: Mon Jan 14 17:17:03 2008 -0600
7196 ColdFire: Update FlexBus CS for MCF532x
7198 Definition update and change from 16bit to 32bit
7200 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7201 Signed-off by: John Rigby <jrigby@freescale.com>
7203 commit 2e72ad0644b940817a89a3590ce0d7b99c05c396
7204 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7205 Date: Mon Jan 14 17:11:47 2008 -0600
7207 ColdFire: PCI and misc updates for MCF5445x
7209 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7210 Signed-off by: John Rigby <jrigby@freescale.com>
7212 commit d2b16493480ac3d4a60ad7d835b0dc27d2e99cee
7213 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7214 Date: Mon Jan 14 17:06:55 2008 -0600
7216 ColdFire: MCF5445x header files cleanup
7218 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7219 Signed-off by: John Rigby <jrigby@freescale.com>
7221 commit d9aae6260993a93f7fcf13abff85a601f4f50ea7
7222 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7223 Date: Mon Jan 14 16:59:42 2008 -0600
7225 ColdFire: MCF532x header files cleanup
7227 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7228 Signed-off by: John Rigby <jrigby@freescale.com>
7230 commit 7af7751d047e74b2ec58400f97b879c56446b3e8
7231 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
7232 Date: Mon Jan 14 15:30:15 2008 -0600
7234 ColdFire: Add modules header files
7236 Add CF specific modules header files
7238 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
7239 Signed-off-by: John Rigby <jrigby@freescale.com>
7241 commit 2956acd5ef93a498337f8ac2ec6ae6a77d491dc5
7242 Author: Kim Phillips <kim.phillips@freescale.com>
7243 Date: Thu Jan 17 12:48:00 2008 -0600
7245 codingstyle cleanup for spi driver
7247 ..and rm unused CONFIG_FSL_SPI define
7249 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7251 commit d59feffb42c9f174116db7a82a311df98983dfce
7252 Author: Haiying Wang <Haiying.Wang@freescale.com>
7253 Date: Wed Jan 16 17:12:12 2008 -0500
7255 FSL: Fix common EEPROM_data structure definition
7257 - Fix EEPROM_data structure definition according to System EEPROM Data Format.
7258 - Read MAC addresses from EEPROM to ethXaddr before saving ethXaddr to
7261 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
7263 commit 6bee764bd6da510a4aad614880300c968bc7318d
7264 Author: Timur Tabi <timur@freescale.com>
7265 Date: Wed Jan 16 15:48:12 2008 -0600
7267 86xx: enable command-line editing
7269 Enable command-line editing for all MPC86xx boards.
7271 Signed-off-by: Timur Tabi <timur@freescale.com>
7273 commit 80ddd22626d321a772ebfba304eb7830cb4f6bac
7274 Author: Ben Warren <biggerbadderben@gmail.com>
7275 Date: Wed Jan 16 22:37:42 2008 -0500
7277 Implement hard SPI driver on MPC8349EMDS
7279 This patch implements the fsl_spi driver on the MPC8349EMDS evaluation board.
7280 This board has an ST M25P40 4Mbit EEPROM on its SPI bus
7282 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7283 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7285 commit 04a9e1180ac76a7bacc15a6fcd95ad839d65bddb
7286 Author: Ben Warren <biggerbadderben@gmail.com>
7287 Date: Wed Jan 16 22:37:35 2008 -0500
7289 Add support for a Freescale non-CPM SPI controller
7291 This patch adds support for the SPI controller found on Freescale PowerPC
7292 processors such as the MCP834x family. Additionally, a new config option,
7293 CONFIG_HARD_SPI, is added for general purpose SPI controller use.
7295 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7296 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7298 commit a8cb43a89be6cfd283257a603dd9841503ccce0f
7299 Author: Dave Liu <r63238@freescale.com>
7300 Date: Thu Jan 17 18:23:19 2008 +0800
7302 mpc83xx: Fix the fatal conflict of merge
7304 The commit 9e89647889cd4b5ada5b5e7cad6cbe55737a08d7
7305 will cause the mpc8315erdb board can't boot up.
7307 The patch fix that bug, and remove the duplicated #ifdef
7308 CFG_SPCR_TSECEP code and clean the SCCR_TSEC2 for
7311 Signed-off-by: Dave Liu <daveliu@freescale.com>
7312 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7314 commit 3259eeaa4148125a81417477f62c05bd67f60587
7315 Author: Larry Johnson <lrj@acm.org>
7316 Date: Thu Jan 17 08:50:09 2008 -0500
7318 Merge Sequoia beautification into Korat code
7320 Signed-off-by: Larry Johnson <lrj@acm.org>
7322 commit e16925773211291b562e77187061e9dd1d757217
7323 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7324 Date: Thu Jan 17 07:45:05 2008 +0100
7326 net: add 'ethrotate' environment variable
7328 [PATCH] net: add 'ethrotate' environment variable
7330 This patch replaces the buildtime configuration option
7331 CONFIG_NET_DO_NOT_TRY_ANOTHER through the 'ethrotate' runtime
7332 configuration veriable. See README.
7334 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7335 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7337 commit ba52be3d0e618c26070e93aaf3c1f2d2adf5571f
7338 Author: Stefan Roese <sr@denx.de>
7339 Date: Thu Jan 17 14:29:04 2008 +0100
7341 ppc4xx: Fix compilation warnings and coding style issues in HCU4/HCU5
7343 Signed-off-by: Stefan Roese <sr@denx.de>
7345 commit 55ed1516cbc1dad3ae277c67ee06fc4a46eaac7d
7346 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7347 Date: Thu Jan 17 18:07:32 2008 +0900
7349 sh: Remove CONFIG_COMMANDS from MS7720SE config file
7351 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7353 commit 055606bd25e88c0cd04ad348a679a04b1b616bee
7354 Author: Niklaus Giger <niklaus.giger@netstal.com>
7355 Date: Wed Jan 16 18:39:20 2008 +0100
7357 ppc4xx: Netstal HCU4 board: added various fixes and POST
7359 - Moved some common code to netstal/common/nm_bsp.c.
7360 - sdram initialisation goes go netstal/common/fixed_sdram.c.
7361 - Added support for POST.
7362 - Stylistic cleanups (multi-line comments/ enforce 80 colomn width)
7364 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
7366 commit 69b0634a4ee98c9791815600d43b99f626a952f3
7367 Author: Niklaus Giger <niklaus.giger@netstal.com>
7368 Date: Thu Jan 17 12:53:56 2008 +0100
7370 ppc4xx: netstal/common define routines used by all boards
7372 Added some routines used by all Netstal boards:
7373 - nm_bsp.c: - nm_show_print and
7374 - common_misc_init_r
7375 - set_params_for_sw_install. Very specific code to handle our SW
7376 installation procedure
7377 - fixed_sdram.c: Common routines for HCU4 (and upcoming) MCU25 boards
7378 to handle sdram initialization.
7379 - nm.h: Common header
7381 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
7383 commit efeff5382b7a91b48a1aa68b2b75f92ad1d33ff8
7384 Author: Niklaus Giger <niklaus.giger@netstal.com>
7385 Date: Wed Jan 16 18:39:18 2008 +0100
7387 ppc4xx: Netstal HCU5 board: added various fixes and POST
7389 - Moved some common code to nestal/common/nm_bsp.c.
7390 - Added support for the vxWorks EDR.
7391 - Enable trace for Lauterbach, if present.
7392 - Added support for POST.
7393 - Stylistic cleanups (multi-line comments/ enforce 80 colomn width)
7395 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
7397 commit 4371090e5da77edc7bf9f296364db4801639d9c4
7398 Author: Niklaus Giger <niklaus.giger@netstal.com>
7399 Date: Wed Jan 16 18:39:08 2008 +0100
7401 ppc4xx: Netstal HCU5 board. Added POST. Various fixes
7404 - Reduced rom_size from 384 to 320 kB
7405 - Environment is now in flash
7409 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
7411 commit 4bd5036e60afac37e484c2d35cbbe7f6cc1623e7
7412 Author: Niklaus Giger <niklaus.giger@netstal.com>
7413 Date: Wed Jan 16 18:37:50 2008 +0100
7415 ppc4xx: Netstal HCU4 board. Added POST. Various fixes
7418 - Reduced rom_size from 384 to 320 kB
7419 - Environment is now in flash
7423 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
7425 commit 1a3ac86b79fcb690275c85861c8efa6a3899060a
7426 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7427 Date: Thu Jan 17 10:53:08 2008 +0100
7429 ppc4xx: Complete DU440 board support
7431 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7433 commit 15a08bc2bef91e5f1ea4b9cf60e46832d86bcc1f
7434 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7435 Date: Thu Jan 17 10:52:30 2008 +0100
7437 ppc4xx: Add DU440 board support
7439 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7441 commit ac331da07db3860f11fa1d0fd3db7c810bce1198
7442 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7443 Date: Thu Jan 17 15:53:52 2008 +0900
7445 sh: Update SuperH SCIF driver
7447 This patch fixed wrong SH7720 CPU macro and changed macro that
7448 calculated value of SCBRR register.
7450 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7452 commit 334e442e6fac59be91244063e9b3f6ca25e8daf8
7453 Author: Grzegorz Bernacki <gjb@semihalf.com>
7454 Date: Wed Jan 16 15:12:47 2008 +0100
7456 Set ips dividor to 1/4 of csb clock.
7458 Previous setting cause ips clock to be out of spec. This bug was found by John
7459 Rigby from Freescale.
7461 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
7463 commit 7dc358bb0de9e2fa341f3b4c914466b1f34b2d89
7464 Author: Kumar Gala <galak@kernel.crashing.org>
7465 Date: Thu Jan 17 02:19:18 2008 -0600
7467 85xx: Get ride of old TLB setup code
7469 Now that all boards have been converted, remove old config code and the
7470 config option for the new style.
7472 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7474 commit 3b558e26a5ef31635787d6d6e97d70939d4f892d
7475 Author: Kumar Gala <galak@kernel.crashing.org>
7476 Date: Thu Jan 17 02:02:10 2008 -0600
7478 85xx: Convert TQM85xx to new TLB setup
7480 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7482 commit 74121b470c14f7eaf284ee838bffca6f9521069e
7483 Author: Kumar Gala <galak@kernel.crashing.org>
7484 Date: Thu Jan 17 01:56:32 2008 -0600
7486 85xx: Convert STXGP3 & STXSSA to new TLB setup
7488 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7490 commit 143b518d9125b54f96f1d7f1afc640b8aae81ff0
7491 Author: Kumar Gala <galak@kernel.crashing.org>
7492 Date: Thu Jan 17 01:44:34 2008 -0600
7494 85xx: Convert SBC8540/SBC8560/SBC8548 to new TLB setup
7496 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7498 commit 818218bac6a11591e2542c344d2330e0f4e1968b
7499 Author: Kumar Gala <galak@kernel.crashing.org>
7500 Date: Thu Jan 17 01:31:34 2008 -0600
7502 85xx: Convert PM854/PM856 to new TLB setup
7504 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7506 commit ff4681c9285b2b4d24552a19cacc1769fe2fc7e0
7507 Author: Kumar Gala <galak@kernel.crashing.org>
7508 Date: Thu Jan 17 01:25:33 2008 -0600
7510 85xx: Convert MPC8540EVAL to new TLB setup
7512 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7514 commit 73aa9ac2b46f1cfd039106ebd6b9865016005234
7515 Author: Kumar Gala <galak@kernel.crashing.org>
7516 Date: Thu Jan 17 01:12:22 2008 -0600
7518 85xx: Convert MPC8568 MDS to new TLB setup
7520 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7522 commit 0db37dc2eed30884db2daa24dbd9a113b5d00610
7523 Author: Kumar Gala <galak@kernel.crashing.org>
7524 Date: Thu Jan 17 01:01:09 2008 -0600
7526 85xx: Convert MPC8541/MPC8555/MPC8548 CDS to new TLB setup
7528 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7530 commit 219a81b98d834f9071b6f7c3bdc6b7ec39cc46cc
7531 Author: Kumar Gala <galak@kernel.crashing.org>
7532 Date: Thu Jan 17 00:52:29 2008 -0600
7534 85xx: Convert MPC8540/MPC8560 ADS to new TLB setup
7536 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7538 commit 80d0b6a1498761c4355b2db9c8001b04c295e7b8
7539 Author: Kumar Gala <galak@kernel.crashing.org>
7540 Date: Thu Jan 17 00:32:17 2008 -0600
7542 85xx: Convert ATUM8548 to new TLB setup
7544 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7546 commit 0f7a3dc95cbff3c21bd6dbc639313796412bbbab
7547 Author: Kumar Gala <galak@kernel.crashing.org>
7548 Date: Wed Jan 16 23:11:57 2008 -0600
7550 85xx: Convert MPC8544 DS to new TLB setup
7552 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7554 commit 8716318057a5f60ab1ba081ece2dbe82ae00e1ee
7555 Author: Kumar Gala <galak@kernel.crashing.org>
7556 Date: Wed Jan 16 22:38:34 2008 -0600
7558 85xx: Reworked initial processor init
7560 Reworked the initial processor initialzation sequence:
7561 * introduced cpu_early_init_f that is run in address space 1 (AS=1)
7562 * Moved TLB/LAW and CCSR init into cpu_early_init_f()
7563 * Reworked initial asm code to do most of the core init before TLBs
7565 The main reasons for these changes are to allow handling of 36-bit phys
7566 addresses in the future and some of the issues that will exist when we
7569 There are a few caveats on what can be initialized via the LAW and TLB
7571 * TLB entry 14/15 can't be initialized via the TLB table
7572 * any LAW that covers the implicit boot window (4G-8M to 4G) must map to
7573 the code that is currently executing.
7575 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7577 commit 44a23cfd6360a68eaa41f945190618a55519eac3
7578 Author: Kumar Gala <galak@kernel.crashing.org>
7579 Date: Wed Jan 16 22:33:22 2008 -0600
7581 85xx: Introduce new tlb API
7583 Add a set of functions to manipulate TLB entries:
7584 * set_tlb() - write a tlb entry
7585 * invalidate_tlb() - invalidate a tlb array
7586 * disable_tlb() - disable a variable size tlb entry
7587 * init_tlbs() - setup initial tlbs based on static table
7589 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7591 commit be88b1699863c262818f3af7f60173b4d48df8fc
7592 Author: Stefan Roese <sr@denx.de>
7593 Date: Thu Jan 17 07:50:17 2008 +0100
7595 ppc4xx: Fix remaining CONFIG_COMMANDS in 4xx files
7597 Signed-off-by: Stefan Roese <sr@denx.de>
7599 commit c8c41d4a80b1a8ad5984a287d81ea780496259f8
7600 Author: Kumar Gala <galak@kernel.crashing.org>
7601 Date: Wed Jan 16 10:04:42 2008 -0600
7603 85xx: Use proper defines for PCI addresses
7605 We should be using the _MEM_PHYS for LAW and TLB setup and not _MEM_BASE.
7606 While _MEM_BASE & _MEM_PHYS are normally the same, _MEM_BASE should only
7607 be used for configuring the PCI ATMU.
7609 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7611 commit 54a5070115eff38e9b324b78abdfa0b4520580b9
7612 Author: Kumar Gala <galak@kernel.crashing.org>
7613 Date: Wed Jan 16 09:22:29 2008 -0600
7615 85xx: Remove old style of LAW init
7617 All boards are now using the new fsl_law code so we can drop the old version.
7619 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7621 commit 4d3521cc79cabc61edf12c48c0ce318d4efb712f
7622 Author: Kumar Gala <galak@kernel.crashing.org>
7623 Date: Wed Jan 16 09:15:29 2008 -0600
7625 85xx: convert remaining 85xx boards over to use new LAW init code
7627 Converted ATUM8548, MPC8568 MDS, MPC8540 EVAL, and TQM85xx boards over
7628 to use new LAW init code.
7630 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7632 commit 572b13afc42710f2957c382a710360429c0e099b
7633 Author: Kumar Gala <galak@kernel.crashing.org>
7634 Date: Wed Jan 16 09:11:53 2008 -0600
7636 85xx: convert STXGP3/STXSSA over to use new LAW init code
7638 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7640 commit 45f2166ac0233a9263058378f39612bd11f61196
7641 Author: Kumar Gala <galak@kernel.crashing.org>
7642 Date: Wed Jan 16 09:06:48 2008 -0600
7644 85xx: convert PM854/PM856 over to use new LAW init code
7646 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7648 commit e2b159d0070ee06e4ac7e2f9381d3e8e542e614a
7649 Author: Kumar Gala <galak@kernel.crashing.org>
7650 Date: Wed Jan 16 09:05:27 2008 -0600
7652 85xx: convert SBC8540/SBC8560/SBC8548 over to use new LAW init code
7654 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7656 commit 2cfaa1aa1aac39a81006b7b27e0e431bf21f6dfa
7657 Author: Kumar Gala <galak@kernel.crashing.org>
7658 Date: Wed Jan 16 01:45:10 2008 -0600
7660 85xx: convert MPC8541/MPC8555/MPC8548 CDS over to use new LAW init code
7662 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7664 commit 7232a2724ccc9dcbc3ec4ef84ada02f13ccd1238
7665 Author: Kumar Gala <galak@kernel.crashing.org>
7666 Date: Wed Jan 16 01:32:06 2008 -0600
7668 85xx: convert MPC8540/MPC8560 ADS over to use new LAW init code
7670 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7672 commit 4bcae9c92aee0d72a2f19b81cab27ef38107ce75
7673 Author: Kumar Gala <galak@kernel.crashing.org>
7674 Date: Wed Jan 16 01:16:16 2008 -0600
7676 85xx: convert MPC8544 DS over to use new LAW init code
7678 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7680 commit 83d40dfd79fe868796275802f60116d84b9e4395
7681 Author: Kumar Gala <galak@kernel.crashing.org>
7682 Date: Wed Jan 16 01:13:58 2008 -0600
7684 85xx: Move LAW init code into C
7686 Move the initialization of the LAWs into C code and provide an API
7687 to allow modification of LAWs after init.
7689 Board code is responsible to provide a law_table and num_law_entries.
7691 We should be able to use the same code on 86xx as well.
7693 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7695 commit bed8ce838a609aaab136d43b25e6df2a520bc854
7696 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7697 Date: Sat Dec 22 15:03:12 2007 +0100
7699 qemu-mips: active HUSH PARSER, AUTO_COMPLETE and CMDLINE_EDITING
7701 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7703 commit 0764c164fed6277d359cf132d55187ea34290114
7704 Author: Vlad Lungu <vlad@comsys.ro>
7705 Date: Wed Jan 16 19:27:51 2008 +0200
7707 MIPS:Target support for qemu -M mips
7709 With serial, NE2000, IDE support. Tested in big-endian mode.
7710 Memory size hard-coded to 128M for now, so don't play with
7713 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
7715 commit 7f52fa3c2df59e49dc2badd7c084cf2d007c438f
7716 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7717 Date: Fri Jan 11 00:01:37 2008 +0100
7719 Fix nfs command help to reflect that the serverip is optional
7721 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7722 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7724 commit b8f4162a4f7a9bee5e9d0305c17f2d34de466a9b
7725 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7726 Date: Mon Dec 10 22:32:14 2007 +0100
7728 bf537-stamp: remove already defined is_zero_ether_addr and is_multicast_ether_addr
7730 and move is_valid_ether_addr board file
7732 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7733 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7735 commit c2f896b8fc4722e36915903e1942e138e68ce804
7736 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
7737 Date: Wed Jan 16 16:13:31 2008 +0900
7739 drivers/net/rtl8139.c: rx_status should be le32_to_cpu(rx_status).
7741 rx_status on the memory is basically in LE, but needs to be handled in CPU
7742 endian. le32_to_cpu() takes up this mission. Even if on the sane hardware,
7745 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
7746 Cc: Masami Komiya <mkomiya@sonare.it>
7747 Cc: Lucas Jin <lucasjin@gmail.com>
7748 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7750 commit 96a236746fe6a7b84802afb4ed31536696d34812
7751 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
7752 Date: Wed Jan 16 16:12:26 2008 +0900
7754 drivers/net/rtl8139.c: Fix cache coherency issues
7756 Current driver is meant for cache coherent systems. This patch adds
7757 flush_cache() routines to support cache non-coherent systems.
7759 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
7760 Cc: Masami Komiya <mkomiya@sonare.it>
7761 Cc: Lucas Jin <lucasjin@gmail.com>
7762 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7764 commit d1276c76c1e2b5035296689280ba1acb2c425104
7765 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
7766 Date: Wed Jan 16 16:11:14 2008 +0900
7768 drivers/net/rtl8139.c: Fix tx timeout
7770 "to = (currticks() + RTL_TIMEOUT)" has possibilities to wrap around. If it
7771 does, the condition "(currticks() < to)" becomes invalid and immediately
7772 leads to tx timeout error. This patch introduces the fine-graded udely(10)
7773 loops to ease the impact of wrapping around.
7775 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
7776 Cc: Masami Komiya <mkomiya@sonare.it>
7777 Cc: Lucas Jin <lucasjin@gmail.com>
7778 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7780 commit 18ee320ff63edbf7b27bbeb05f0e12a52302c68a
7781 Author: Dave Liu <r63238@freescale.com>
7782 Date: Fri Jan 11 18:45:28 2008 +0800
7784 TSEC: Add the support for RealTek RTL8211B PHY
7786 Add the support of RealTek RTL8211B PHY, the RTL8211B
7787 PHY only supports RGMII and MII mode.
7789 Signed-off-by: Dave Liu <daveliu@freescale.com>
7790 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7792 commit 84a3047b72b70e862b0b7a8e2058077457f89a32
7793 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
7794 Date: Wed Jan 16 09:40:41 2008 +0100
7796 Remove annoying debug printout for PHY less boards.
7798 PHY less board prints out lots of "read wrong ...":
7799 read wrong value : mii_id 3,mii_reg 2, base e0102320
7800 read wrong value : mii_id 3,mii_reg 3, base e0102320
7801 UEC: PHY is Generic MII (ffffffff)
7802 read wrong value : mii_id 3,mii_reg 4, base e0102320
7803 read wrong value : mii_id 3,mii_reg 0, base e0102320
7804 read wrong value : mii_id 3,mii_reg 1, base e0102320
7805 read wrong value : mii_id 3,mii_reg 1, base e0102320
7806 read wrong value : mii_id 3,mii_reg 5, base e0102320
7807 read wrong value : mii_id 3,mii_reg 1, base e0102320
7808 read wrong value : mii_id 3,mii_reg 1, base e0102320
7809 read wrong value : mii_id 3,mii_reg 5, base e0102320
7810 FSL UEC0: Full Duplex
7811 FSL UEC0: Speed 100BT
7812 FSL UEC0: Link is up
7813 Using FSL UEC0 device
7815 Make this printout depend on UEC_VERBOSE_DEBUG and
7816 remove its definition in uec_phy.c
7818 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
7819 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7821 commit ee62ed3286f83b98b7785e0318dc6379e78f7ff6
7822 Author: Kim Phillips <kim.phillips@freescale.com>
7823 Date: Tue Jan 15 14:11:00 2008 -0600
7825 net: reduce boot latency on QE UEC based boards
7827 actually polling for PHY autonegotiation to finish enables us to remove the
7828 5 second boot prompt latency present on QE based boards.
7830 call to qe_set_mii_clk_src in init_phy, and mv call to init_phy from
7831 uec_initialize to uec_init by Joakim Tjernlund; autonegotiation wait
7832 code shamelessly stolen from tsec driver.
7834 also rm unused CONFIG_RMII_MODE code.
7836 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7837 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
7838 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7840 commit 55fe7c57a8b99a130925052dcdbb77f053dc50e3
7841 Author: michael.firth@bt.com <michael.firth@bt.com>
7842 Date: Wed Jan 16 11:40:51 2008 +0000
7844 TSEC driver: Change MDIO support to allow access to any PHYs on the MDIO bus
7846 The current TSEC driver limits MDIO access to the devices that have been configured as attached
7847 to a TSEC MAC. This patch allows access to any PHY device on the MDIO bus through the 'mii' commands.
7849 Signed-off-by: Michael Firth <michael.firth@bt.com>
7850 Acked-by: Andy Fleming <afleming@freescale.com>
7851 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7853 commit 5e918a98c26e8ab9b5d2d48d998a2ced2b5b85b3
7854 Author: Kim Phillips <kim.phillips@freescale.com>
7855 Date: Wed Jan 16 00:38:05 2008 -0600
7857 Add support for the MPC837xERDB
7859 MPC837xERDB board support includes:
7860 * DDR2 330MHz hardcoded (soldered on the board)
7861 * Local Bus NOR Flash
7863 * eTSEC RGMII (TSEC0 - RTL8211B with MII;
7864 * TSEC1 - VSC7385 local bus, hardcoded, requires seperate firmware
7867 Signed-off-by: Kevin Lam <kevin.lam@freescale.com>
7868 Signed-off-by: Joe D'Abbraccio <joe.d'abbraccio@freescale.com>
7869 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7871 commit 9e89647889cd4b5ada5b5e7cad6cbe55737a08d7
7872 Author: Kim Phillips <kim.phillips@freescale.com>
7873 Date: Wed Jan 16 12:06:16 2008 -0600
7875 mpc83xx: add support for more system clock performance controls
7877 System registers that are modified are the Arbiter Configuration
7878 Register (ACR), the System Priority Control Register (SPCR), and the
7879 System Clock Configuration Register (SCCR).
7881 Signed-off by: Michael F. Reiss <Michael.F.Reiss@freescale.com>
7882 Signed-off by: Joe D'Abbraccio <ljd015@freescale.com>
7883 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7885 commit 16c3cde050e2d243e62b37486f1558570787beb8
7886 Author: James Yang <james.yang@freescale.com>
7887 Date: Wed Jan 16 11:58:08 2008 -0600
7889 FSL: Generalize PIXIS reset command parsing.
7891 Before, the order of arguments to the pixis_reset
7892 command needed to be supplied in a hard-coded order.
7893 Generalize the command parsing to allow any order.
7895 Signed-off-by: James Yang <james.yang@freescale.com>
7896 Acked-by: Jon Loeliger <jdl@freescale.com>
7898 commit ad8f8687b78c3e917b173f038926695383c55555
7899 Author: Jon Loeliger <jdl@freescale.com>
7900 Date: Tue Jan 15 13:42:41 2008 -0600
7902 FSL: Convert board/freescale/common/Makefile to use CONFIG_
7904 Convert the board/freescale/common/Makefile to use
7905 CONFIG_* options to select which files to conditionally
7906 compile into the board/freescale/common library rather
7907 than conditionally compiling entire files.
7914 CONFIG_ID_EEPROM is introduced until CFG_ID_EEPROM is gone.
7916 Signed-off-by: Jon Loeliger <jdl@freescale.com>
7918 commit 7c2221eb230372a9e537c4f6636b147b0909325f
7919 Author: Roy Zang <tie-fei.zang@freescale.com>
7920 Date: Tue Jan 15 16:38:38 2008 +0800
7922 Use CONFIG_ULI526X as MPC8610HPCD default Ethernet driver
7924 Use driver/net/uli526x.c as MPC8610HPCD default Ethernet driver.
7925 Remove unused ethernet CONFIG_ options.
7927 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
7928 Acked-by: Jon Loeliger <jdl@freescale.com>
7930 commit 711a7946277d2e29af481011e8635e9975c54e45
7931 Author: Kim Phillips <kim.phillips@freescale.com>
7932 Date: Tue Jan 15 14:05:14 2008 -0600
7934 mpc83xx: fix QE ETHPRIMEs to correct 'FSL UEC0' value
7936 continuation of commit b96c83d4ae475a70ef2635cd0e748174c44c8601
7938 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7940 commit 363eea9ff7f19a2cba17f262bd17559f166e134e
7941 Author: Kim Phillips <kim.phillips@freescale.com>
7942 Date: Tue Jan 15 09:51:12 2008 -0600
7944 mpc83xx: clean up mpc8360emds.c warnings
7946 mpc8360emds.c: In function 'ft_board_setup':
7947 mpc8360emds.c:327: warning: assignment makes pointer from integer without a cast
7948 mpc8360emds.c:329: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast
7949 mpc8360emds.c:334: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast
7950 mpc8360emds.c:341: warning: assignment makes pointer from integer without a cast
7951 mpc8360emds.c:343: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast
7952 mpc8360emds.c:348: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast
7954 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7956 commit f09880ea72a1c806db223ce594c5fb1b6542ff6a
7957 Author: Kim Phillips <kim.phillips@freescale.com>
7958 Date: Mon Jan 14 16:14:46 2008 -0600
7960 mpc83xx: fix phy-connection-type fixup code
7962 use tree passed to us in local blob, not global fdt.
7964 Also use fdt_path_offset to convert to relative offset, since absolute
7965 reference is needed to check for rgmii-id mode string value.
7967 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7969 commit 2b4c952be7c4357a13e839d48df80853820c33eb
7970 Author: Kumar Gala <galak@kernel.crashing.org>
7971 Date: Mon Jan 14 09:01:40 2008 -0600
7973 mpc83xx: fix mpc8313/mpc8315/mpc8349itx Makefiles for silent build (with -s)
7975 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7976 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7978 commit e1d8ed2c08da14b168658cc5fa78529d461aea70
7979 Author: Poonam Aggrwal <b10812@freescale.com>
7980 Date: Mon Jan 14 09:41:14 2008 +0530
7982 Changes in uboot DDR configuration for MPC8313eRDB
7984 These changes were identified by HighSmith Bill ,Mazzyar and Joseph for
7985 DDR configuration in u-boot code. Some are related to performance, some
7986 affect stability and some correct few basic errors in the current
7989 The changes have been tested and found to give better memory latency
7990 figures on MPC8313eRDB.LMBench figures prove it.
7994 - CS0_CONFIG[ AP_n_EN] is changed from 1 to 0
7995 (this may improve performance for application with many read
7996 or write to open pages).
7997 - CS0_CONFIG[ODT_WR_CFG] is currently changed from 100 to
7998 001 (activating all the CS when only one is used may cause
7999 unwanted noise on the system)
8001 - TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 8clks (based on
8003 - TIMING_CFG_1[REFREC] changed from 21 clks to 18clks.
8005 - TIMING_CFG_2[AL] value changed from 0 setting to 1 clk to
8006 comply with the 3 ODT clk requirements)
8007 - TIMING_CFG_2[CPO] was set to a reserved value, changed to RL+3/4.
8008 - TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 6clks.
8010 - DDR_SDRAM_MODE[AL]changed from 0 to 1.
8011 - DDR_SDRAM_MODE[WRREC] changed from 1 clk to 3 clks.
8013 - DDR_SDRAM_INTERVAL[REFINT] is changed from 0x0320 to 0x0510.
8014 - DDR_SDRAM_INTERVAL[BSTOPRE] is changed from 0x64 to 0x0500.
8016 The patch is based of git://www.denx.de/git/u-boot-mpc83xx.git
8017 The last commit on this tree was 6775c68683a53c7abc778774641aac6f833a2cbf
8019 Signed-off-by: Poonam Aggrwal-b10812 <b10812@freescale.com>
8020 Cc: Bill HighSmith <Bill.Highsmith@freescale.com>
8021 Cc: Razzaz Mazyar <MRazzaz@freescale.com>
8022 Cc: Josep P J <PJ.Joseph@freescale.com>
8023 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8025 commit b5cdd7df4a06edb91539c9a2ea7c178a870c3a95
8026 Author: Jerry Van Baren <gvb.uboot@gmail.com>
8027 Date: Sat Jan 12 13:24:14 2008 -0500
8029 Enable the isdram command on the MPC8360EMDS board
8031 The isdram command prints out decoded information the "serial presence
8032 detect" (SPD) chip on the SDRAM SIMMs. This can be very helpful when
8033 debugging memory configuration problems.
8035 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
8036 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8038 commit 8bd522ce4afda3d4868ee8c913f5394094326be1
8039 Author: Dave Liu <r63238@freescale.com>
8040 Date: Fri Jan 11 18:48:24 2008 +0800
8042 mpc83xx: Add the support for MPC8315ERDB board
8045 - Boot from NOR Flash
8046 - DDR2 266MHz hardcoded configuration
8047 - Local bus NOR Flash R/W operation
8048 - I2C, UART, MII and RTC
8052 Signed-off-by: Dave Liu <daveliu@freescale.com>
8053 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8055 commit b05884efa614e4d8a9413158fc228e0dc02ab704
8056 Author: Dave Liu <r63238@freescale.com>
8057 Date: Fri Jan 11 18:46:50 2008 +0800
8059 mpc83xx: Add config of eTSEC emergency priority in SPCR
8061 The TSEC emergency priority definition of 831x/837x
8062 is different than the definition of 834x in SPCR register.
8064 Add the other config of TSEC emergency priority into
8067 Signed-off-by: Dave Liu <daveliu@freescale.com>
8068 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8070 commit 9b958234b0783f13d92f007f753fd2c3ae2c8680
8071 Author: Dave Liu <r63238@freescale.com>
8072 Date: Fri Jan 11 18:42:19 2008 +0800
8074 mpc83xx: Remove cache config from MPC8360ERDK.h
8076 The MPC8360ERDK board support patch is added before
8077 the commit 2c5b48fc205c3e2752910da8f39209ed075929e5
8078 so, miss clean up it.
8080 The patch clean up the miss cache config.
8082 Signed-off-by: Dave Liu <daveliu@freescale.com>
8083 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8085 commit cd9d23053d435c08fc8695017b5cb9003fcda786
8086 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
8087 Date: Mon Jan 14 23:09:32 2008 +0300
8089 nand: FSL UPM NAND driver
8091 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
8093 commit 6cb2239ae76faee64434286c4f8fc71374702dd2
8094 Author: Kyungmin Park <kmpark@infradead.org>
8095 Date: Tue Jan 15 08:59:44 2008 +0900
8097 OneNAND: Separate U-Boot dependent code from OneNAND
8099 OneNAND: Separate U-Boot dependent code from OneNAND
8101 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
8103 commit 83a49c8dd7998be2d1f0d420597a36bbf0bf4164
8104 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
8105 Date: Wed Jan 16 10:33:46 2008 +0100
8107 ppc4xx: Sequoia coding style cleanup and beautification
8109 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
8111 commit 4b3cc6ece9c455504cf12909fae38d085d848ac0
8112 Author: Larry Johnson <lrj@acm.org>
8113 Date: Tue Jan 15 14:35:58 2008 -0500
8115 ppc4xx: Refactor ECC POST for AMCC Denali core
8117 The ECC POST reported intermittent failures running after power-up on
8118 the Korat PPC440EPx board. Even when the test passed, the debugging
8119 output occasionally reported additional unexpected ECC errors.
8121 This refactoring has three main objectives: (1) minimize the code
8122 executed with ECC enabled during the tests, (2) add more checking of the
8123 results so any unexpected ECC errors would cause the test to fail, and
8124 (3) use synchronization (only) where required by the processor.
8126 Signed-off-by: Larry Johnson <lrj@acm.org>
8128 commit 2465665b73ac2f688af945b1ed510752afa816a4
8129 Author: David Saada <David.Saada@ecitele.com>
8130 Date: Tue Jan 15 10:40:24 2008 +0200
8132 QE UEC: Extend number of supported UECs to 4
8134 This patch extends the number of supported UECs to 4. Note that the
8135 problem of QE thread resources exhaustion is resolved by setting the
8136 correct number of QE threads according to Ethernet type (GBE or FE).
8138 Signed-off-by: David Saada <david.saada@ecitele.com>
8139 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8141 commit 58d204256cb1ce1bd323847d9f644acf70a72e6a
8142 Author: Wolfgang Denk <wd@denx.de>
8143 Date: Wed Jan 16 00:01:01 2008 +0100
8145 LWMON5: enable hush shell as command line parser
8147 Signed-off-by: Wolfgang Denk <wd@denx.de>
8149 commit 66ffb1883feedddc813d8a507d060f2a940eb2b2
8150 Author: Wolfgang Denk <wd@denx.de>
8151 Date: Tue Jan 15 17:22:28 2008 +0100
8153 ADS5121: disable watchdog; enable image timestamps
8155 Signed-off-by: Wolfgang Denk <wd@denx.de>
8157 commit 2b4f778fe9d1de61d7445bae7b325340aba6968d
8158 Author: Wolfgang Denk <wd@denx.de>
8159 Date: Tue Jan 15 17:21:28 2008 +0100
8161 TK885D: fixes for bigger flash sector sizes on new modules;
8162 adjust default environment;
8163 disable SCC ethernet (not used on this board).
8165 Signed-off-by: Wolfgang Denk <wd@denx.de>
8167 commit f91d7ae5ca89acf9fa1ed1015dc078cf29581607
8168 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8169 Date: Tue Jan 15 17:48:13 2008 +0900
8171 pcmcia: Remove CONFIG_COMMANDS from marubun pcmcia driver
8173 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8175 commit 76e49aa7fb8e76cc49092c1acd53fff921e26360
8176 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8177 Date: Tue Jan 15 23:25:25 2008 +0900
8179 sh: Add support SH7710/SH7712
8181 SH7710/SH7712 of SH3 CPU are supported.
8182 SH771X is called SH-Ether, and has the Ether controller in CPU.
8183 The driver of Ether is not included in this patch.
8185 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8187 commit 63a11be68306870e04d3851ed9fa41955cdf4894
8188 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8189 Date: Tue Jan 15 23:06:17 2008 +0900
8191 sh: Add support of map_physmem() and unmap_physmem() to SuperH
8193 This patch add the support of map_physmem() and unmap_physmem()
8194 used with Common Flash Interface(CFI) driver.
8196 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8198 commit db3995fe5164ac5d630b7ecb96286a9828dfbb54
8199 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8200 Date: Wed Jan 9 14:42:27 2008 +0900
8202 sh: Add maintainer of MS7720SE to the MAINTAINER file
8204 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8206 commit dcd99e88e03d56a0aeecd42b507d2d29d20ab0e3
8207 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8208 Date: Wed Jan 9 14:39:58 2008 +0900
8210 sh: Fix board name in MS7720SE's config.mk
8212 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8214 commit c0a04d93734d768b39dbb72fb501b65614c8615d
8215 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8216 Date: Wed Jan 9 14:37:36 2008 +0900
8218 sh: Add MS7720SE to MAKEALL
8220 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8222 commit b2b5e2bb78a1ef4ae8504f5a26bfdc3293ea74ae
8223 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
8224 Date: Mon Dec 3 22:58:50 2007 +0900
8226 sh: Add support for MS7720RP02 board
8228 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
8229 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8230 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8232 commit 7c10c57275901939a8ece4a9ef3e7ccb7c12a0ed
8233 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
8234 Date: Wed Jan 9 14:30:02 2008 +0900
8236 sh: Add support for SH7720 in serial_sh driver.
8238 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
8239 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8240 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8242 commit f9913a8ee71ff14fcfc1c7fd0e6912f897e69403
8243 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
8244 Date: Mon Dec 3 22:58:45 2007 +0900
8246 sh: Add support SH3 and SH7720
8248 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
8249 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8250 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8252 commit 9adfc9fb9ade64cdf1ed9ff842e4f900cbda78bd
8253 Author: Stefan Roese <sr@denx.de>
8254 Date: Tue Jan 15 10:11:02 2008 +0100
8256 ppc4xx: Remove compiler warning in cpu/ppc4xx/44x_spd_ddr2.c
8258 Signed-off-by: Stefan Roese <sr@denx.de>
8260 commit 17bef68097ab3692500a36fb31115bff7910aa99
8261 Author: Niklaus Giger <niklausgiger@gmx.ch>
8262 Date: Mon Jan 14 14:04:42 2008 +0100
8264 ppc_4xx: Fix post spr.c for PPC405
8266 post/cpu/ppc4xx/spr.c contained a few checks for registers only present
8267 for PPC440 and derivates processor.
8269 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
8271 commit 06c428bcd4413014b43236e77765022071424fa6
8272 Author: Dave Liu <r63238@freescale.com>
8273 Date: Mon Jan 14 11:12:01 2008 +0800
8275 QE: fix compile warning
8277 qe.c: In function 'qe_upload_firmware':
8278 qe.c:390: warning: pointer targets in passing argument 2
8279 uec.c: In function 'uec_initialize':
8280 uec.c:1236: warning: 'uec_info' may be used uninitialized
8282 Signed-off-by: Dave Liu <daveliu@freescale.com>
8284 commit a0dd99d51efa55fe023e19c97ead92683725eb11
8285 Author: Stefan Roese <sr@denx.de>
8286 Date: Mon Jan 14 10:05:05 2008 +0100
8288 ppc4xx: Update Kilauea CPLD configuration with USB PHY reset bit
8290 Now that bit 29 is the USB PHY reset bit, update the Kilauea port
8291 to remove the USB PHY reset after powerup. The CPLD will keep the
8292 USB PHY in reset (active low) until the bit is set to 1 in
8293 board_early_init_f().
8295 Signed-off-by: Stefan Roese <sr@denx.de>
8297 commit f43ad53908f1ea83a7c26c3505bbe84382e47aad
8298 Author: Wolfgang Denk <wd@denx.de>
8299 Date: Sun Jan 13 23:26:45 2008 +0100
8301 ARM: update mach-types.h from 2.6.24-rc7 Linux kernel tree
8303 Signed-off-by: Wolfgang Denk <wd@denx.de>
8305 commit 8d103071b7b0e3ec888859bfcb9d422565e6d750
8306 Author: Wolfgang Denk <wd@denx.de>
8307 Date: Sun Jan 13 23:37:50 2008 +0100
8309 ADS5121: Fix typo in ads5121.c, adjust default environment
8311 Signed-off-by: Wolfgang Denk <wd@denx.de>
8313 commit 51b67d06faa670c65de6f29ec5b5aace74b2a047
8314 Author: John Rigby <jrigby@freescale.com>
8315 Date: Fri Aug 24 18:18:43 2007 -0600
8317 ADS5121: MAX slew rate for PATA pins
8319 Signed-off-by: John Rigby <jrigby@freescale.com>
8321 commit dd531aac34aaad138f16cacdb51d61908d59c0e2
8322 Author: Wolfgang Denk <wd@denx.de>
8323 Date: Sun Jan 13 21:05:52 2008 +0100
8325 Fix Makefile dependency problem with parallel builds.
8327 Signed-off-by: Wolfgang Denk <wd@denx.de>
8329 commit 89967841e3ea02e3d0e5e1295ab687576e5b1089
8330 Author: Wolfgang Denk <wd@denx.de>
8331 Date: Sun Jan 13 19:51:39 2008 +0100
8333 MPC8544DS: fix board Makefile for silent build (with -s)
8335 Signed-off-by: Wolfgang Denk <wd@denx.de>
8337 commit 6d714f82fb4b8bb7e267e9c71b8009bc670bfe88
8338 Author: Wolfgang Denk <wd@denx.de>
8339 Date: Sun Jan 13 16:44:08 2008 +0100
8341 PMC440 board: fix board Makefile for out-of-tree building
8343 Signed-off-by: Wolfgang Denk <wd@denx.de>
8345 commit 6eb3fb15588d319bd3099d5f9b910051dfeab6b2
8346 Author: Wolfgang Denk <wd@denx.de>
8347 Date: Sun Jan 13 16:07:44 2008 +0100
8349 Makalu: fix compile warning
8351 Signed-off-by: Wolfgang Denk <wd@denx.de>
8353 commit 0a1e03bcadc7734688a21e8dd2e46a4f608193c0
8354 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8355 Date: Sun Jan 13 12:36:12 2008 +0100
8357 cmd_nand : fix compiler warning.
8359 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8361 commit 8225d1e3ac0ab147cdde4b0042812583380afb8a
8362 Author: Michael Schwingen <rincewind@discworld.dascon.de>
8363 Date: Sat Jan 12 20:29:47 2008 +0100
8365 CFI: Fix CONFIG_FLASH_CFI_LEGACY compilation
8367 Signed-off-by: Michael Schwingen <michael@schwingen.org>
8368 Acked-by: Stefan Roese <sr@denx.de>
8370 commit 2b2f43ed6a30ece77f76191c845ac95267daa31a
8371 Author: Wolfgang Denk <wd@denx.de>
8372 Date: Sun Jan 13 02:19:44 2008 +0100
8374 MPC8360ERDK: fix incorrect initialization of CFG_I2C_NOPROBES
8376 Signed-off-by: Wolfgang Denk <wd@denx.de>
8378 commit 08e99e1dd01a3e0e3dc3a7138eb827c997e2b74d
8379 Author: Wolfgang Denk <wd@denx.de>
8380 Date: Sun Jan 13 02:19:13 2008 +0100
8382 MPC8xx FEC driver: fix compiler warning.
8384 Signed-off-by: Wolfgang Denk <wd@denx.de>
8386 commit ae6d1056d2c2e4d1266413c0ae8a6d5529ecde4b
8387 Author: Wolfgang Denk <wd@denx.de>
8388 Date: Sun Jan 13 00:59:21 2008 +0100
8390 Fix Makefile dependencies issues; allow silent build
8392 - get rid of "version" target whichdidn't really work
8393 - make autoconf.mk depend on version_autogenerated.h to make sure
8394 to rebuild files as needed
8395 - add XECHO macro to allow for silent build using "make -s"
8397 Signed-off-by: Wolfgang Denk <wd@denx.de>
8399 commit e343ab83d5135b558aa58db9be8fc7faa68d77ed
8400 Author: Wolfgang Denk <wd@denx.de>
8401 Date: Sun Jan 13 00:55:47 2008 +0100
8403 ADS5121e: fix compile warning
8405 Signed-off-by: Wolfgang Denk <wd@denx.de>
8407 commit f2b6f4610627fe3d607620e25082916a01538875
8408 Author: Wolfgang Denk <wd@denx.de>
8409 Date: Sun Jan 13 00:55:18 2008 +0100
8411 MUNICes: fix board Makefile for remote build directory
8413 Signed-off-by: Wolfgang Denk <wd@denx.de>
8415 commit 2ad4d3999fe801aa716221d7d9a4c5bdad74783a
8416 Author: Oliver Weber <almoeli@gmx.de>
8417 Date: Wed Jan 9 17:04:38 2008 +0100
8419 MPC5200: don't use hardcoded MBAR address in Bestcomm firmware
8421 Signed-off-by: Oliver Weber <almoeli@gmx.de>
8423 commit 00ac50e348d1bace27a174b7f528d113bc7cdf7f
8424 Author: Andreas Engel <andreas.engel@ericsson.com>
8425 Date: Wed Jan 9 17:10:56 2008 +0100
8427 Make bootretry work when command line editing is enabled
8429 Currently, when CONFIG_CMDLINE_EDITING is set, bootretry doesn't work.
8430 This patch fixes the problem.
8432 Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
8434 commit 632de0672d3c3ab53ad798c47f5f1eb26008a0e4
8435 Author: Larry Johnson <lrj@acm.org>
8436 Date: Fri Jan 11 23:26:18 2008 -0500
8438 Refactor code for "i2c sdram" command
8440 Signed-off-by: Larry Johnson <lrj@acm.org>
8442 commit 0df6b8446c4721b91ce311548114891130371083
8443 Author: Larry Johnson <lrj@acm.org>
8444 Date: Thu Jan 10 22:23:39 2008 -0500
8446 Fix "i2c sdram" command for DDR2 DIMMs
8448 Many of the SPD bytes for DDR2 SDRAM are not interpreted correctly by the
8449 "i2c sdram" command. This patch provides correct alternative
8450 interpretations when DDR2 memory is detected.
8452 Signed-off-by: Larry Johnson <lrj@acm.org>
8454 commit 64134f011254123618798ff77c42ba196b2ec485
8455 Author: Wolfgang Denk <wd@denx.de>
8456 Date: Sat Jan 12 20:31:39 2008 +0100
8458 Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections
8460 With recent toolchain versions, some boards would not build because
8461 or errors like this one (here for ocotea board when building with
8463 ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab]
8465 For many boards, the .bss section is big enough that it wraps around
8466 at the end of the address space (0xFFFFFFFF), so the problem will not
8467 be visible unless you use a 64 bit tool chain for development. On
8468 some boards however, changes to the code size (due to different
8469 optimizations) we bail out with section overlaps like above.
8471 The fix is to add the NOLOAD attribute to the .bss and .sbss
8472 sections, telling the linker that .bss does not consume any space in
8475 Signed-off-by: Wolfgang Denk <wd@denx.de>
8477 commit 3afac79ec27b91df185f090b31dad9620779f440
8478 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8479 Date: Fri Jan 11 20:42:58 2008 -0600
8481 USB: Add Philips 1561 PCI-OHCI ids
8482 (needed for M5475EVB)
8484 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8486 commit 5e8def6731cd7bec74bff42a16b139de04010353
8487 Author: Wolfgang Denk <wd@denx.de>
8488 Date: Sat Jan 12 15:51:34 2008 +0100
8490 Add MAINTAINERS entries for ids8247, jupiter, municse, sc3 and uc101
8493 Signed-off-by: Heiko Schocher <hs@denx.de>
8494 Signed-off-by: Wolfgang Denk <wd@denx.de>
8496 commit 5d49e0e152a8b81cc0602271e8fd259371f559b7
8497 Author: Grzegorz Bernacki <gjb@semihalf.com>
8498 Date: Fri Jan 11 12:03:43 2008 +0100
8500 MPC512X: Cleanup bus clock names.
8502 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
8504 commit 66a9455b6bf46d69cec5c88d1a600d1d9a10670d
8505 Author: Grzegorz Bernacki <gjb@semihalf.com>
8506 Date: Tue Jan 8 17:16:59 2008 +0100
8508 MPC512X: Fixed typo in macro name.
8510 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
8512 commit 281ff9a45cf9eb17b8a9afc436cb783cf1f62363
8513 Author: Grzegorz Bernacki <gjb@semihalf.com>
8514 Date: Tue Jan 8 17:16:15 2008 +0100
8516 ads5121: Added support for FDT.
8518 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
8520 commit a10ff9196183e7e5f2ae3c4f5f3cbe92ae9cb719
8521 Author: Wolfgang Denk <wd@denx.de>
8522 Date: Sat Jan 12 01:05:50 2008 +0100
8524 Coding Style cleanup; update CHANGELOG.
8526 Signed-off-by: Wolfgang Denk <wd@denx.de>
8528 commit f6db945649e5e9d0c7efe33b507d243cdc86cf03
8529 Author: Heiko Schocher <hs@denx.de>
8530 Date: Fri Jan 11 15:15:17 2008 +0100
8532 Fixed syntax error in function init_e300_core() of mpc83xx/start.S if
8534 Signed-off-by: Timur Tabi <timur@freescale.com>
8535 Signed-off-by: Heiko Schocher <hs@denx.de>
8537 commit fa05664cd8c7ab1ecf062aa73b992b7b58bba49c
8538 Author: Heiko Schocher <hs@denx.de>
8539 Date: Fri Jan 11 15:15:16 2008 +0100
8541 MUNICes: Set the right CFG_DEFAULT_MBAR value.
8543 Signed-off-by: Heiko Schocher <hs@denx.de>
8545 commit 5fb2b2342ece8d786c6f7fdba1bc273febd3b3d2
8546 Author: Heiko Schocher <hs@denx.de>
8547 Date: Fri Jan 11 15:15:15 2008 +0100
8549 added the config File for the MUNICes board.
8551 Signed-off-by: Heiko Schocher <hs@denx.de>
8553 commit 6341d9d723b71b4c0bf86f979e4cb228c02fd09d
8554 Author: Heiko Schocher <hs@denx.de>
8555 Date: Fri Jan 11 15:15:14 2008 +0100
8557 added basic support for the MUNICes board.
8559 Signed-off-by: Heiko Schocher <hs@denx.de>
8561 commit 3bb77fb09a1caabf5a292cc5b486a78b977fbe19
8562 Author: Wolfgang Denk <wd@denx.de>
8563 Date: Sat Jan 12 00:39:37 2008 +0100
8565 Update CHANGELOG and MAINTAINERS files.
8567 Signed-off-by: Wolfgang Denk <wd@denx.de>
8569 commit 5ba7390c3cb579172be66888a371707b47b5be4e
8570 Author: Anatolij Gustschin <agust@denx.de>
8571 Date: Fri Jan 11 02:15:02 2008 +0100
8573 Fix compilation problem in common/cmd_bmp.c
8575 common/cmd_bmp.c fails to compile if CONFIG_VIDEO_BMP_GZIP
8576 isn't defined. This patch fix this.
8578 Signed-off-by: Anatolij Gustschin <agust@denx.de>
8580 commit 5aa437baae5fe629abeab99bef793a2a1fc71b58
8581 Author: Heiko Schocher <hs@denx.de>
8582 Date: Fri Jan 11 01:12:09 2008 +0100
8584 Fix defaultconfig for the mgcoge board.
8586 Signed-off-by: Heiko Schocher <hs@denx.de>
8588 commit ac9db066b26935f31bff15c98168b19faeb603f3
8589 Author: Heiko Schocher <hs@denx.de>
8590 Date: Fri Jan 11 01:12:08 2008 +0100
8592 Added support for the mgcoge board from keymile.
8594 Signed-off-by: Heiko Schocher <hs@denx.de>
8596 commit b423d055cc2e13c4ef1f0389c3fa2988d0eed818
8597 Author: Heiko Schocher <hs@denx.de>
8598 Date: Fri Jan 11 01:12:07 2008 +0100
8600 Enable SMC microcode relocation patch for SMC1.
8602 Signed-off-by: Heiko Schocher <hs@denx.de>
8604 commit 381e4e639720d8d2efb8066c7c48ec9588cb28c7
8605 Author: Heiko Schocher <hs@denx.de>
8606 Date: Fri Jan 11 01:12:06 2008 +0100
8608 Added support for the mgsuvd board from keymile.
8610 Signed-off-by: Heiko Schocher <hs@denx.de>
8612 commit bf05293973b348f6946c9df92cd3c65ece42d0be
8613 Author: James Yang <james.yang@freescale.com>
8614 Date: Thu Jan 10 16:02:07 2008 -0600
8616 Fix 64-bit vsprintf.
8618 There were some size and unsigned problems.
8619 Also add support for "ll" size modifier in format string like glibc
8621 Signed-off-by: James Yang <James.Yang@freescale.com>
8622 Acked-by: Jon Loeliger <jdl@freescale.com>
8624 commit 92fa37eac530860643afa26ae347af3d23d67309
8625 Author: Larry Johnson <lrj@acm.org>
8626 Date: Wed Jan 9 12:42:35 2008 -0500
8628 Remove superfluous preprocessor conditionals from LM73 driver
8630 (1) Remove unused symbol "CFG_EEPROM_PAGE_WRITE_ENABLE".
8632 (2) Use conditional Makefile.o.
8634 Signed-off-by: Larry Johnson <lrj@acm.org>
8636 commit efc6f447c1b940d1650c4b854c5598a595ddc3da
8637 Author: Guennadi Liakhovetski <lg@denx.de>
8638 Date: Thu Jan 10 17:59:07 2008 +0100
8640 Add support for the TK885D baseboard from TELE-DATA
8642 The TK885D board uses a TQM885D module from TQ, this port adds an
8643 own configuration file and adds a last_stage_init() method to
8644 configure the two PHYs, depending on the phy_auto_nego environment
8647 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
8649 commit 0ec595243dc99edcd248bbcfbfd5a1dc860bde89
8650 Author: Kumar Gala <galak@kernel.crashing.org>
8651 Date: Thu Jan 10 02:22:05 2008 -0600
8653 Fix compiler warning
8655 main.c: In function 'readline_into_buffer':
8656 main.c:927: warning: unused variable 'p_buf'
8658 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
8660 commit bed53753dd1d7e6bcbea4339be0fb7760214cc35
8661 Author: Anatolij Gustschin <agust@denx.de>
8662 Date: Fri Jan 11 14:30:01 2008 +0100
8664 Add Fujitsu CoralP/Lime video driver
8666 Signed-off-by: Anatolij Gustschin <agust@denx.de>
8667 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
8669 commit 20c450ef61ef2eb1c96f9b59ba0eb8d849bba058
8670 Author: Anatolij Gustschin <agust@denx.de>
8671 Date: Fri Jan 11 02:39:47 2008 +0100
8673 Fix video console newline and carriage return handling
8675 Lines of the lenght CONSOLE_COLS or greater than CONSOLE_COLS
8676 are not displayed correctly. This is an attempt to fix
8677 this issue. Also add carriage return handling.
8679 Signed-off-by: Anatolij Gustschin <agust@denx.de>
8680 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
8682 commit d5a163d6baa04f5a8edcc10ebc6fad08657d3093
8683 Author: Stefan Roese <sr@denx.de>
8684 Date: Fri Jan 11 15:53:58 2008 +0100
8686 ppc4xx: Fix sdram init on Sequoia boards
8688 Clear possible errors in MCSR resulting from data-eye-search.
8689 If not done, then we could get an interrupt later on when
8690 exceptions are enabled.
8692 Signed-off-by: Stefan Roese <sr@denx.de>
8694 commit d610a60730b7464f6f659db49d264d89a7c71061
8695 Author: Anatolij Gustschin <agust@denx.de>
8696 Date: Fri Jan 11 15:31:09 2008 +0100
8698 ppc4xx: Rework Lime support for lwmon5
8700 Rework Lime support for lwmon5 using new video driver
8702 Signed-off-by: Anatolij Gustschin <agust@denx.de>
8704 commit ff41ffc93c1592e77a44bdbebd5d781739f3aae0
8705 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
8706 Date: Fri Jan 11 14:55:16 2008 +0100
8708 ppc4xx: Update PMC440 config file
8710 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
8712 commit e3edcb36f14f0aabb6f50e96014d6877f73d64ea
8713 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
8714 Date: Fri Jan 11 14:55:08 2008 +0100
8716 ppx4xx: Fix sdram init on PMC440 boards
8718 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
8720 commit 061aad4d320dddce26247699dcf2875ee2ea1366
8721 Author: Dave Liu <r63238@freescale.com>
8722 Date: Thu Jan 10 23:09:33 2008 +0800
8724 mpc83xx: Fix the bug of 266MHz data rate DDR
8726 The DDR doesn't work on the 266MHz data rate,
8727 the patch fix the bug.
8729 Signed-off-by: Dave Liu <daveliu@freescale.com>
8730 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8732 commit ded08317ad9e340b887bf2eb46e9565a0f610a93
8733 Author: Dave Liu <r63238@freescale.com>
8734 Date: Thu Jan 10 23:08:26 2008 +0800
8736 mpc83xx: Make the code more readable
8738 Format the code, make it more readable
8740 Signed-off-by: Dave Liu <daveliu@freescale.com>
8741 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8743 commit 7e74d63d1a211fbc34ec424e2dc6726601f323d0
8744 Author: Dave Liu <r63238@freescale.com>
8745 Date: Thu Jan 10 23:07:23 2008 +0800
8747 mpc83xx: Reduce the latency of DDR
8749 Reduce the AL from 2 to 1 clock to improve the performance.
8751 Signed-off-by: Dave Liu <daveliu@freescale.com>
8752 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8754 commit 6f3931a2bed5412c20d5e5536c865fbd657f7d28
8755 Author: Dave Liu <r63238@freescale.com>
8756 Date: Thu Jan 10 23:06:05 2008 +0800
8758 mpc83xx: Fix the wrong definition of MPC8315E
8760 According to the latest user manual of MPC8315E,
8761 1) The SVCOD of HRCWL is different than 837x
8762 2) The SCCR has changes
8764 Signed-off-by: Dave Liu <daveliu@freescale.com>
8765 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8767 commit ec2638ea08a537a1bd409db873aaaa33a053ebae
8768 Author: Dave Liu <r63238@freescale.com>
8769 Date: Thu Jan 10 23:05:00 2008 +0800
8771 mpc83xx: Fix the typo in mpc83xx.h
8773 The SPCR about TSEC priority is wrong.
8775 Signed-off-by: Michael Barkowski <Michael.Barkowski@freescale.com>
8776 Signed-off-by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com>
8777 Signed-off-by: Dave Liu <daveliu@freescale.com>
8778 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8780 commit c86ef2cd9ef81935049231fa89f36c7b793f2d4b
8781 Author: Dave Liu <r63238@freescale.com>
8782 Date: Thu Jan 10 23:04:13 2008 +0800
8784 mpc83xx: Fix the typo in global data struct
8786 Fix the typo in global_data.h
8788 Signed-off-by: Dave Liu <daveliu@freescale.com>
8789 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8791 commit 2c5b48fc205c3e2752910da8f39209ed075929e5
8792 Author: Dave Liu <r63238@freescale.com>
8793 Date: Thu Jan 10 23:03:03 2008 +0800
8795 mpc83xx: Remove cache config from config.h
8797 clean up the cache config from configs.h of board
8799 Signed-off-by: Dave Liu <daveliu@freescale.com>
8800 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8802 commit fab6f556bbbbd1bb35a5433161f7f173c18df559
8803 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
8804 Date: Wed Jan 9 20:57:47 2008 +0300
8806 mpc83xx: add support for the MPC8360E-RDK
8808 This is MPC8360E based board with:
8809 - 256MB fixed SDRAM;
8810 - 8MB Intel Strata NOR flash;
8811 - StMICRO 64MiB NAND flash;
8812 - two 10/100/1000 ethernet ports connected via Broadcom
8814 - two 10/100 ethernet ports connected via National
8816 - one PCI and one miniPCI slots;
8817 - four serial ports (two NS16550-compatible, two UCCs);
8818 - four USB ports working through MPC8360E "FHCI" USB controller;
8819 - Fujitsu MB86277 graphics controller;
8820 - Analog to Digital Converter/Touchscreen controller, AD7843
8823 Features not supported in this patch are:
8824 - StMICRO 64MiB NAND flash (patch sent);
8825 - MINT framebuffer initialization (patch is pending);
8826 - Fetching production information from the EEPROM via I2C;
8828 - Two slow UCCs used as RS-485 UARTs.
8830 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
8831 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8833 commit b3d2cde7a3aa1e83b7968cdff929e52c8cc617bb
8834 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
8835 Date: Wed Jan 9 20:57:40 2008 +0300
8837 mpc83xx: add "fsl, qe" compatible fixups
8839 New device trees will use "fsl,qe" compatible properties.
8841 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
8842 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8844 commit 977b57583a7c34010e566a09a679ec3c1836f996
8845 Author: Kim Phillips <kim.phillips@freescale.com>
8846 Date: Wed Jan 9 15:24:06 2008 -0600
8848 mpc83xx: add missing CONFIG_HAS_ETH0 defines
8850 the new libfdt code only updates eth0 if CONFIG_HAS_ETH0
8851 is defined; add the define to the missing board configs.
8853 Thanks to Emilian Medve for finding this.
8855 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8857 commit b830b7f1635984ba607219fcbd78597c28eeb529
8858 Author: Becky Bruce <bgill@freescale.com>
8859 Date: Thu Jan 10 14:00:28 2008 -0600
8861 86xx: Support 2GB DIMMs
8863 Configure the number of bits used to address the banks inside the SDRAM
8864 device. The default register value of 0 means 2 bits to address 4 banks.
8865 Higher capacity devices like a 2GB DIMM require 3 bits to address 8 banks.
8867 Signed-off-by: Becky Bruce <bgill@freescale.com>
8869 commit 4d332dbeb08f5863d1ea69d91a00c5499d3a87ed
8870 Author: Niklaus Giger <niklausgiger@gmx.ch>
8871 Date: Thu Jan 10 18:50:33 2008 +0100
8873 ppc4xx: Make Sequoia boot vxWorks
8876 TLB 0 a entry for the Machine Check interrupt
8877 TLB 1 a entry for the RAM
8878 TLB 2 a entry for the EBC
8879 TLB 3 a entry for the boot flash
8881 After changing the baudrate to 9600 I had no problems to boot the
8882 vxWorks image as distributed by WindRiver (Revision 2.0/1 from
8885 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
8887 commit 6d8184b00c0d1d7090e4a2f514e310d98a394f8d
8888 Author: Larry Johnson <lrj@arlinx.com>
8889 Date: Wed Jan 9 23:10:27 2008 -0500
8891 ppc4xx: Fix dflush() to restore DVLIM register
8893 Signed-off-by: Larry Johnson <lrj@acm.org>
8895 commit 252f60b068d1f94190b5bcfda169db582387e15e
8896 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8897 Date: Thu Jan 10 03:52:44 2008 -0500
8899 Nios2: remove common/cmd_bdinfo.c unused variable.
8901 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8902 Signed-off-by: Scott McNutt <smcnutt@psyent.com>
8904 commit 422b1a01602b6e2fbf8444a1192c7ba31461fd4c
8905 Author: Ben Warren <biggerbadderben@gmail.com>
8906 Date: Wed Jan 9 18:15:53 2008 -0500
8908 Fix Ethernet init() return codes
8910 Change return values of init() functions in all Ethernet drivers to conform
8916 All drivers going forward should return 0 on success. Current drivers that
8917 return 1 on success were left as-is to minimize changes.
8919 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8920 Acked-by: Stefan Roese <sr@denx.de>
8921 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8922 Acked-by: Kim Phillips <kim.phillips@freescale.com>
8923 Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
8924 Acked-By: Timur Tabi <timur@freescale.com>
8926 commit d3a6532cbe263d992f49e86ac95bede28e96f9c8
8927 Author: Wolfgang Denk <wd@denx.de>
8928 Date: Thu Jan 10 00:55:14 2008 +0100
8930 Coding Style cleanup; update CHANGELOG
8932 Signed-off-by: Wolfgang Denk <wd@denx.de>
8934 commit 17a41e4492121ccf9fa2c10c2cb1a6d1c18d74f7
8935 Author: Kim Phillips <kim.phillips@freescale.com>
8936 Date: Wed Jan 9 16:56:54 2008 -0600
8938 Add QE brg freq and correct qe bus freq fdt update code
8940 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8941 Signed-off-by: Andy Fleming <afleming@freescale.com>
8943 commit 890dfef06c2d169a3356359596890754dfb8ee1c
8944 Author: Andy Fleming <afleming@freescale.com>
8945 Date: Wed Jan 9 16:34:51 2008 -0600
8947 Remove cache config from ATUM8548 and sbc8548 configs
8949 These boards weren't updated by Kumar's config patch because they
8950 weren't in the tree, yet.
8952 Signed-off-by: Andy Fleming <afleming@freescale.com>
8954 commit b8ec2385038c094b07ec5b49336289a46b6e9cc6
8955 Author: Timur Tabi <timur@freescale.com>
8956 Date: Mon Jan 7 13:31:19 2008 -0600
8958 85xx: add ability to upload QE firmware
8960 Define the layout of a binary blob that contains a QE firmware and instructions
8961 on how to upload it. Add function qe_upload_firmware() to parse the blob and
8962 perform the actual upload. Add command-line command "qe fw" to take a firmware
8963 blob in memory and upload it. Update ft_cpu_setup() on 85xx to create the
8964 'firmware' device tree node if U-Boot has uploaded a firmware. Fully define
8965 'struct rsp' in immap_qe.h to include the actual RISC Special Registers.
8967 Signed-off-by: Timur Tabi <timur@freescale.com>
8969 commit b009f3eca99bb7b9e6ba6639a8909a138dd5e9fe
8970 Author: Kumar Gala <galak@kernel.crashing.org>
8971 Date: Tue Jan 8 01:22:21 2008 -0600
8973 85xx: Remove cache config from configs.h
8975 Either use the standard defines in asm/cache.h or grab the information
8976 at runtime from the L1CFG SPR.
8978 Also, minor cleanup in cache.h to make the code a bit more readable.
8980 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
8982 commit b964e9368f45372aaf1da0c13fe56f6d81ae8e96
8983 Author: robert lazarski <robertlazarski@gmail.com>
8984 Date: Fri Dec 21 10:39:27 2007 -0500
8986 mpc85xx: Add support for ATUM8548 (updated)
8988 Add support for Instituto Atlantico's ATUM8548 board
8990 Signed-off-by: robert lazarski <robertlazarski@gmail.com>
8991 Signed-off-by: Andy Fleming <afleming@freescale.com>
8993 commit 7bd6104b71de9bca80ac8e0936003443bb42f2fc
8994 Author: robert lazarski <robertlazarski@gmail.com>
8995 Date: Fri Dec 21 10:36:37 2007 -0500
8997 mpc85xx: Add support for ATUM8548 (updated)
8999 Add support for Instituto Atlantico's ATUM8548 board
9001 Signed-off-by: robert lazarski <robertlazarski@gmail.com>
9003 commit 9e3ed392d2c8965e24c942b58796c31c644c2f70
9004 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
9005 Date: Thu Dec 13 06:45:14 2007 -0600
9007 mpc85xx: Add support for SBC8548 (updated)
9009 Add support for Wind River's SBC8548 reference board.
9011 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
9013 commit 11c45ebd46d6517b51b7a92dd52a618b2f4e5586
9014 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
9015 Date: Thu Dec 13 06:45:08 2007 -0600
9017 mpc85xx: Add support for SBC8548 (updated)
9019 Add support for Wind River's SBC8548 reference board.
9021 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
9022 Signed-off by: Andy Fleming <afleming@freescale.com>
9024 commit 64d4bcb087c2ece1c4d0de8efe85e0075e5b1594
9025 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
9026 Date: Mon Oct 22 19:58:19 2007 +0400
9028 MPC8568E-MDS: set up QE pario for UART1
9030 To use UART1 on the MPC8568E-MDS, QE pario pins PC[0:3] should
9031 be set up appropriately.
9033 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
9035 commit ad162249cb371e9e38971676f09be791e5f3cf4a
9036 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
9037 Date: Mon Oct 22 18:12:46 2007 +0400
9039 MPC8568E-MDS: reset UCCs to use them reliably
9041 In order to use GETH1 and GETH2 on the MPC8568E-MDS, we should reset
9044 p.s Similar code exists in the Linux kernel board file (for capability
9045 reasons with older U-Boots), but should be removed some day.
9047 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
9049 commit 2146cf56821c3364786ca94a7306008c5824b238
9050 Author: Kumar Gala <galak@kernel.crashing.org>
9051 Date: Wed Dec 19 01:18:15 2007 -0600
9053 Reworked FSL Book-E TLB macros to be more readable
9055 The old macros made it difficult to know what WIMGE and perm bits
9056 were set for a TLB entry. Actually use the bit masks for these items
9057 since they are only a single bit.
9059 Also moved the macros into mmu.h out of e500.h since they aren't specific
9062 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9064 commit 1d47273d46925929f8f2c1913cd96d7257aade88
9065 Author: Kumar Gala <galak@kernel.crashing.org>
9066 Date: Tue Dec 18 23:21:51 2007 -0600
9068 Use FSL Book-E MMU macros from Linux Kernel
9070 Grab the FSL Book-E MAS register macros from Linux. Also added
9071 defines for page sizes up to 4TB and removed SHAREN since it doesnt
9074 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9076 commit 02df4a270f817ef6ec39047a01b55fecdc5f3b37
9077 Author: Andy Fleming <afleming@freescale.com>
9078 Date: Wed Jan 9 13:51:32 2008 -0600
9080 Fix my own merge stupidity
9082 Way back in August I merged Heiko's patch:
9083 566a494f592: [PCS440EP] upgrade the PCS440EP board
9085 with Jon's CONFIG_COMMANDS patches.
9087 This was done in commit: 6bf6f114dcdd97ec3f80c2761ed40e31229d6b78
9089 However, in the process, I left out some of Heiko's good changes.
9091 Now Heiko's and Jon's patches are properly merged in fat_register_device()
9093 Signed-off-by: Andy Fleming <afleming@freescale.com>
9095 commit 6636b62a6efc7f14e6e788788631ae7a7fca4537
9096 Author: James Yang <James.Yang@freescale.com>
9097 Date: Wed Jan 9 11:17:49 2008 -0600
9099 Expose parse_line() globally.
9101 Add new function readline_into_buffer() that allows the
9102 output of readline to be put into a pointer to char buffer.
9104 This refactoring allows other functions besides the
9105 main command loop to also use the same input mechanism.
9107 Signed-off-by: James Yang <James.Yang@freescale.com>
9108 Acked-by: Jon Loeliger <jdl@freescale.com>
9110 commit 7ca90513486abd4ae50bd1b7403f47cc58c5ad25
9111 Author: Guennadi Liakhovetski <lg@denx.de>
9112 Date: Wed Jan 9 01:15:25 2008 +0100
9114 trivial: fix consequences of a bad merge
9116 Fix what looks like a merge artifact.
9118 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
9120 commit 4785a694c0045996ccf0ac5b8edf531efc1b730e
9121 Author: Zhang Wei <wei.zhang@freescale.com>
9122 Date: Thu Jan 3 10:51:15 2008 +0800
9124 Add Ctrl combo key support to usb keyboard driver.
9126 Ctrl combo key support is added, which is very useful to input Ctrl-C
9127 for interrupt current job.
9128 Also add usb_event_poll() calling to usb_kbd_testc(), which can get
9129 key input when tstc() is called.
9131 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
9133 commit 10c7382bc5d5e64c47f94ac2ca78cc574442e82d
9134 Author: Marcel Ziswiler <marcel@ziswiler.com>
9135 Date: Sun Dec 30 03:30:56 2007 +0100
9137 fix various comments
9139 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
9141 commit 7817cb2083d982923752fe0f12b67c0e7c09a027
9142 Author: Marcel Ziswiler <marcel@ziswiler.com>
9143 Date: Sun Dec 30 03:30:46 2007 +0100
9145 fix comments with new drivers organization
9147 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
9149 commit a9b410dc7d2a4721c408b13abfc037988150f145
9150 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
9151 Date: Fri Dec 28 12:50:59 2007 +0900
9153 Remove the obsolete terse version of do_mii()
9155 We now have more useful version of do_mii() and everybody use it.
9156 Gerald Van Baren says:
9158 > When I originally wrote the mii command 6(!) years ago, I wrote a
9159 > verbose version that printed human readable decomposition of the flags,
9160 > etc., and a terse one that didn't print as much stuff and thus had a
9161 > smaller memory footprint.
9163 > It sounds like the terse version has withered and died, apparently
9164 > people are only using the verbose version (which is very understandable,
9167 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
9168 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
9170 commit 01c687aa6e065bd4faf80f723361e798941dd6b0
9171 Author: Mike Frysinger <vapier@gentoo.org>
9172 Date: Thu Dec 27 13:42:56 2007 -0500
9174 Do not reference sha1.c when building mkimage.
9176 remove sha1.o from mkimage linking since it isn't actually used.
9178 Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
9180 commit b9173af73e524d37c812f210173cf83385c5171a
9181 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
9182 Date: Thu Dec 27 15:39:54 2007 +0900
9184 common/cmd_mii.c: Add sanity argc check
9186 If type mii command without arguments, we suffer from uninitialized argv[]
9187 entries; for example we MIPS get stuck by TLB error.
9189 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
9191 commit 500856eb1707ed17d9204baa61dd59948d3b2899
9192 Author: Rafal Jaworowski <raj@semihalf.com>
9193 Date: Wed Jan 9 19:39:36 2008 +0100
9195 API for external applications.
9197 This is an API for external (standalone) applications running on top of
9198 U-Boot, and is meant to be more extensible and robust than the existing
9199 jumptable mechanism. It is similar to UNIX syscall approach. See api/README
9202 Included is the demo application using this new framework (api_examples).
9204 Please note this is still an experimental feature, and is turned off by
9207 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
9209 commit fe8dd0b2220b7c02b0d4c9c4f9967879970477b1
9210 Author: Jon Loeliger <jdl@freescale.com>
9211 Date: Wed Jan 9 12:14:55 2008 -0600
9213 86xx: Remove cache config from configs.h
9215 Just use the standard defines in asm/cache.h.
9217 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9219 commit 26a41790f8eba19ad450e18ae91351daf485b3e2
9220 Author: Rafal Jaworowski <raj@semihalf.com>
9221 Date: Wed Jan 9 18:05:27 2008 +0100
9223 Globalize envmatch()
9225 The newly introduced API (routines related to env vars) will need to call
9228 Signed-off-by: Rafal Zabdyr <armo@semihalf.com>
9230 commit 1df170f8b2a99e1e2f940f9f0b56511e1e4c9e1f
9231 Author: Jon Loeliger <jdl@freescale.com>
9232 Date: Fri Jan 4 12:07:27 2008 -0600
9234 Convert MPC8610HPCD to use libfdt.
9236 Assumes the presence of the aliases node in the DTS to
9237 locate the pci and serial nodes for fixups.
9239 Use consistent fdtaddr and fdtfile in environment variables.
9241 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9243 commit c9974ab0a4d3731cdb76a7599d9fe9445d764d60
9244 Author: Jon Loeliger <jdl@freescale.com>
9245 Date: Fri Jan 4 11:58:23 2008 -0600
9247 8610: Fix lingering compile warnings.
9251 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9253 commit 6007f3251c0967adc13f2ed8be1b924ddc30124d
9254 Author: Wolfgang Denk <wd@denx.de>
9255 Date: Wed Jan 9 15:14:46 2008 +0100
9257 Coding Style cleanup, update CHANGELOG
9259 Signed-off-by: Wolfgang Denk <wd@denx.de>
9261 commit fc6414eca55f1fc108fb12fc8cdc43bd8b4463f9
9262 Author: Mike Frysinger <vapier@gentoo.org>
9263 Date: Tue Dec 18 04:29:55 2007 -0500
9265 fix easylogo on big endian dev systems
9267 didnt realize how out of shape easylogo actually was until i tried using it.
9268 this patch does byte swapping as need be on the input tga header since the tga
9269 is in little endian but the host could just as well be big endian. i didnt
9270 bother using bswap macros or such stuff from system headers as nothing in
9271 POSIX dictates byte swapping functionality.
9273 Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
9275 commit 38d299c2db81bd889c601b5dfc12c4e83ef83333
9276 Author: Mike Frysinger <vapier@gentoo.org>
9277 Date: Tue Dec 18 03:23:25 2007 -0500
9281 - make the Makefile not suck
9282 - include proper headers for prototypes
9283 - fix obvious broken handling of strchr() when handling '.' in filenames
9285 Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
9287 commit 883e3925d99a8dd69c5b0201cba5b1887f88f95c
9288 Author: raptorbrino@aim.com <raptorbrino@aim.com>
9289 Date: Thu Dec 13 21:23:28 2007 -0500
9291 Fix build problems under Cygwin
9293 This patch allows u-boot to build without error in a cygwin
9294 environment. Cygwin does not define __u64 in it's
9295 include/asm/types.h file. The -idirafter flag in the u-boot
9296 build causes the inclusion of the cygwin types.h file as opposed
9297 to u-bot/include/asm/types.h file which does define __u64.
9298 Subsequently, sha1.c compile fails due to unknown symbol.
9300 Signed-off-by: Brian Miller <raptorbrino@netscape.net>
9302 commit 43ef1c381f9195504a2488f5cb909227eb97d475
9303 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
9304 Date: Fri Nov 30 17:29:59 2007 +0100
9306 cmd_bmp: Add support for displaying gzip compressed bmps
9308 The existing code can show information about a gzip compressed BMP
9309 image, but can't actually display it.
9311 Therefore, move the decompression code out of bmp_info() and use it in
9312 bmp_display() as well in order to display a compressed BMP image.
9314 Also, clean things up a bit and fix a memory leak while we're at it.
9316 [hskinnemoen@atmel.com: a bit of refactoring]
9317 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
9319 commit d197ffd8172c6fdef38733424640a9a47295d6e9
9320 Author: Guennadi Liakhovetski <lg@denx.de>
9321 Date: Thu Nov 29 21:15:56 2007 +0100
9323 Fix and optimize MII operations on FEC (MPC8xx) controllers
9325 This patch fixes several issues at least on a MPC885 based system with two
9326 FEC interfaces used in MII mode.
9328 1. PHY discovery should first read PHY_PHYIDR2 register and only then
9329 PHY_PHYIDR1 like cpu/mpc8xx/fec.c::mii_discover_phy() does it,
9330 otherwise the values read are wrong. Also notice, that PHY discovery
9331 cannot work on MPC88x / MPC87x in setups with both FECs active at all
9332 in its present form, because for both interfaces the registers from FEC
9333 1 are used to communicate over MII.
9335 2. Remove code duplication for resetting the FEC by isolating it into a
9338 3. Initialize MII on FEC 1 when communicating over FEC 2 in fec_init().
9340 4. Optimize mii_init() to only reset the FEC 1 controller once.
9342 5. Fix a typo in mii_init() using index i instead of j thus potentially
9343 leading to unpredictable results.
9345 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
9347 commit 6a5e1d75bf106fa157e9ce68bcaf4b13e8a1d214
9348 Author: Guennadi Liakhovetski <lg@denx.de>
9349 Date: Tue Nov 20 13:14:20 2007 +0100
9351 Fix endianness conversions in rtl8169 driver
9353 It is unclear on what platforms this driver has been tested, since
9354 noone up to now defines CONFIG_RTL8169 in the board configuration
9355 header. Now it has been fixed for a big-endian mpc8241 based
9356 linkstation platform. This patch presents the necessary endianness
9359 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
9361 commit 58694f9709c0c3e3178e349ae748d98cfb0c639a
9362 Author: Zhang Wei <wei.zhang@freescale.com>
9363 Date: Thu Jan 3 10:51:15 2008 +0800
9365 Add Ctrl combo key support to usb keyboard driver.
9367 Ctrl combo key support is added, which is very useful to input Ctrl-C
9368 for interrupt current job.
9369 Also add usb_event_poll() calling to usb_kbd_testc(), which can get
9370 key input when tstc() is called.
9372 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
9373 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
9375 commit 07eb02687f008721974a2fb54cd7fdc28033ab3c
9376 Author: Wolfgang Denk <wd@denx.de>
9377 Date: Wed Jan 9 13:43:38 2008 +0100
9379 Coding Style clenaup; update CHANGELOG
9381 Signed-off-by: Wolfgang Denk <wd@denx.de>
9383 commit c26acc1a43b31ddca5add42fd0360ff0eee90c80
9384 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9385 Date: Thu Dec 27 17:13:11 2007 +0100
9387 Remove bit swapping in Xilinx Spartan bitfile loading
9389 This patch removes the unnecessary bit swapping when
9390 booting .bit files with the 'fpga loadb' command.
9392 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9394 commit 437fc7327f0611f82937858f2d80e4cd61b40984
9395 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9396 Date: Thu Dec 27 17:13:05 2007 +0100
9398 Fix MSB check in Xilinx Spartan slave serial mode
9400 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9402 commit 3bff4ffa33729a42645e328a21e8d16488872958
9403 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9404 Date: Thu Dec 27 17:12:56 2007 +0100
9406 Add new Xilinx Spartan FPGA types
9408 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9410 commit 21d39d598c4e74d4e7761608c79dba2715d40a4c
9411 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9412 Date: Thu Dec 27 17:12:43 2007 +0100
9414 Add pre and post configuration callbacks for Spartan FPGAs
9416 This patch adds a post configuration callback for Spartan2/3 FPGAs.
9417 pre and post configuration callback are now optional and
9418 not called when the function pointer is set to NULL.
9420 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9422 commit 0133502e39ff89b67c26cb4015e0e7e8d9571184
9423 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9424 Date: Thu Dec 27 17:12:34 2007 +0100
9426 Improve configuration of FPGA subsystem
9428 This patch removes the FPGA subsystem configuration through
9429 the CONFIG_FPGA bitmask configuration option.
9431 See README for the new options:
9434 CONFIG_FPGA_<vendor>,
9435 CONFIG_FPGA_<family>
9437 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9439 commit 95c6bc7d4a3588b452baca610f8c795a83630477
9440 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9441 Date: Thu Dec 27 16:55:17 2007 +0100
9443 Add Epson RX8025 RTC support
9445 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9447 commit 1208a2dfde02bedd3c5bda29a606632b8e0be058
9448 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9449 Date: Thu Dec 27 16:57:23 2007 +0100
9451 serial: Make default_serial_console() a weak function
9453 With this patch it is possible to reimplement default_serial_console()
9454 in board specific code. This will be done in the upcomming PMC440
9455 U-Boot port. This also allows the lwmon board maintainer to
9456 remove the '#if !defined(CONFIG_LWMON) ...' from common/serial.c.
9458 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9460 commit d16471ee05ce7ac5392bc0e9fe3ff4b58a768f33
9461 Author: Harald Welte <laforge@openmoko.org>
9462 Date: Wed Dec 19 14:14:47 2007 +0100
9464 add 'terminal program' functionality
9466 This patch adds a 'cu' like serial terminal command to u-boot
9467 using which you can access other serial ports from the system console.
9469 OpenMoko uses this in their Neo1973 phones to get access to the GSM
9470 Modem and GPS chip from the bootloader.
9472 Signed-off-by: Harald Welte <laforge@openmoko.org>
9474 commit 62d4f4365341576f5a5307b2b205a5aa2e3c6be6
9475 Author: Harald Welte <laforge@openmoko.org>
9476 Date: Wed Dec 19 14:12:53 2007 +0100
9478 Re-introduce the 'nand read.oob' and 'nand write.oob' commands
9479 that used to exist with the legacy NAND code
9481 Signed-off-by: Harald Welte <laforge@openmoko.org>
9483 commit f540c42d9564854b19ce9bbb70affe172529fe70
9484 Author: Harald Welte <laforge@openmoko.org>
9485 Date: Wed Dec 19 14:09:58 2007 +0100
9487 Fix building with CRAMFS but not JFFS2 support
9489 Signed-off-by: Harald Welte <laforge@openmoko.org>
9491 commit 23d0baf967fecdaf1804f045f6339337c5607eec
9492 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9493 Date: Sat Dec 22 15:52:58 2007 +0100
9495 Allow CONFIG_AUTO_COMPLETE and command history CONFIG_CMDLINE_EDITING at the sametime
9497 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9498 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9500 commit 23776ff292966a85d811126933830bed48211826
9501 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9502 Date: Tue Dec 11 10:53:12 2007 +0100
9504 ARM: support board-specific ethernet PHY init
9506 Add until the new phylib will be arrived
9508 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9510 commit 7b74ebe723e576baedf5a8b6240589b19b845a1b
9511 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9512 Date: Sat Dec 8 16:34:08 2007 +0100
9514 IXP: Add full baud-rate support for ixp42x, ixp45x and ixp46x
9516 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9518 commit a2df4da31b1a1e41e3e9e1358cfc52b806046ce1
9519 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9520 Date: Sun Dec 9 11:01:10 2007 +0100
9522 Add missing file in gitignore and comments
9524 based on Linux source tree's .gitignore files
9526 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9528 commit 435dc8fcdb3bc61d3d490773a8f369f98a20c868
9529 Author: Wolfgang Denk <wd@denx.de>
9530 Date: Wed Jan 9 11:36:21 2008 +0100
9532 Coding Style cleanup, update CHANGELOG
9534 Signed-off-by: Wolfgang Denk <wd@denx.de>
9536 commit b2e2142c500c48a57f18f9dd30e66c13caea0971
9537 Author: Stefan Roese <sr@denx.de>
9538 Date: Wed Jan 9 10:38:58 2008 +0100
9540 POST: Execute SPR test after relocation
9542 On LWMON5 we now use d-cache as init-ram and stack. The SPR POST test uses
9543 self modifying code and this doesn't work with stack in d-cache, since
9544 I can't move the code from d-cache to i-cache. We move the SPR test to
9545 be executed a little later, after relocation. Then stack is located in
9546 SDRAM and this self-modifying code is no problem anymore.
9548 Signed-off-by: Stefan Roese <sr@denx.de>
9550 commit 8f24e0637ae113500d8bd60d80d57afcc0aa8bde
9551 Author: Stefan Roese <sr@denx.de>
9552 Date: Wed Jan 9 10:28:20 2008 +0100
9554 ppc4xx: Change LWMON5 to not use OCM for init-ram and POST anymore
9556 This patch configures the LWMON5 port to use d-cache as init-ram and
9557 the unused GPT0_COMP6 as POST WORD storage.
9559 Signed-off-by: Stefan Roese <sr@denx.de>
9561 commit 1754f50b710194f886b6f2831803d8960171a14d
9562 Author: Stefan Roese <sr@denx.de>
9563 Date: Wed Jan 9 10:25:46 2008 +0100
9565 ppc4xx: Add CFG_POST_ALT_WORD_ADDR to support non OCM POST WORD storage
9567 The privious 4xx POST implementation only supported storing the POST
9568 WORD in OCM. Since we need to reserve the OCM on LWMON5 for the logbuffer
9569 we need to store the POST WORD in some other non volatile location.
9570 This patch adds CFG_POST_ALT_WORD_ADDR to specify an address for such
9573 Signed-off-by: Stefan Roese <sr@denx.de>
9575 commit e02c521d94b45d7b05aa522e4ccde6b74bf5fe57
9576 Author: Stefan Roese <sr@denx.de>
9577 Date: Wed Jan 9 10:23:16 2008 +0100
9579 ppc4xx: Add 44x cache locking to better support init-ram in d-cache
9581 This patch adds support for locking the init-ram/stack in d-cache,
9582 so that other regions may use d-cache as well
9584 Note, that this current implementation locks exactly 4k of d-cache,
9585 so please make sure that you don't define a bigger init-ram area. Take
9586 a look at the lwmon5 440EPx implementation as a reference.
9588 Signed-off-by: Stefan Roese <sr@denx.de>
9590 commit 0ddb89601a8d29e808db450366752ffdc6267c53
9591 Author: Wolfgang Denk <wd@denx.de>
9592 Date: Wed Jan 9 10:16:33 2008 +0100
9594 Fix memset bug in ext2fs_read_file()
9596 ext2fs_read_file() had the function arguments swapped.
9598 Pointed out by Mike Montour, 19 Dec 2007 22:34:25 -0800
9600 Signed-off-by: Wolfgang Denk <wd@denx.de>
9602 commit 32d6f1bc09175f3b77469771e839bc7255a9f22e
9603 Author: Markus Klotzbücher <mk@denx.de>
9604 Date: Tue Jan 5 08:17:15 1988 +0100
9606 Fix problems with usb storage devices on MPC5200 /TQM5200
9608 The MPC5200 OHCI controller operates in big endian, so
9609 CFG_OHCI_BE_CONTROLLER must be defined for it to work properly.
9611 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
9613 commit 46f6e5019048b103d7693d5310de0f1cfbaf4c19
9614 Author: Wolfgang Denk <wd@denx.de>
9615 Date: Tue Jan 8 22:58:27 2008 +0100
9617 Fix compile problem with new env code.
9619 Signed-off-by: Wolfgang Denk <wd@denx.de>
9621 commit 64b3727b9779d86127cd576e392a987de5ebb9fd
9622 Author: Markus Klotzbücher <mk@denx.de>
9623 Date: Tue Nov 27 10:23:20 2007 +0100
9625 tools: fix fw_printenv tool to compile again
9627 This patch updates the fw_printenv/fw_setenv userspace tool to include
9628 the correct MTD header in order to compile against current kernel
9629 headers. Backward compatibility is preserved by introducing an option
9630 MTD_VERSION which can be set to "old" for compilation using the old MTD
9631 headers. Along with this a number of warnings are fixed.
9633 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
9635 commit 1f84021a85abeb837d2ce0dc84297b4f1d45d516
9636 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9637 Date: Tue Jan 8 15:40:09 2008 +0100
9639 ppc4xx: assign PCI interrupts on seuqoia boards
9641 Some operating systems rely on assigned PCI interrupts.
9643 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9645 commit 6e9233d30afe57cb6e148fbfa4895e7810196fac
9646 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9647 Date: Tue Jan 8 15:50:49 2008 +0100
9649 ppc4xx: Move cpu/ppc4xx/vecnum.h into include path
9651 This patch allows the use of 4xx interrupt vector number defines
9652 in board specific code outside cpu/ppc4xx.
9654 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9656 commit 580d1d3186a2bc6dbdb626941b716dae1788e51e
9657 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9658 Date: Tue Jan 8 15:39:01 2008 +0100
9660 ppc4xx: Fix UIC2 vector number base
9662 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9664 commit ff5fb8a6ccba56e3482d0e297d8cfb7faa040811
9665 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9666 Date: Tue Jan 8 12:49:58 2008 +0100
9668 ppc4xx: Update PLB/PCI divider for PMC440 board
9670 This patch updates the PLB/PCI divider when running at
9671 400MHz CPU frequency from 4 to 3 which results in 44MHz PCI sync clock.
9673 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9675 commit 7d5d75633174867316a0c0f2fca5ceb2cf312cde
9676 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9677 Date: Tue Jan 8 11:13:09 2008 +0100
9679 ppc4xx: Disable error message when no NAND chip is installed on PMC440
9681 Add CFG_NAND_QUIET_TEST option to disable error message when
9682 no NAND chip is installed on PMC440 boards.
9684 Disable a couple of config defines that are only used for NAND_U_BOOT.
9686 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9688 commit c83d7ca4dadd44ae430235077f63b64a11f36f6e
9689 Author: Wolfgang Denk <wd@denx.de>
9690 Date: Tue Jan 8 22:58:27 2008 +0100
9692 Fix compile problem with new env code.
9694 Signed-off-by: Wolfgang Denk <wd@denx.de>
9696 commit 6de66b35426312a21174a9bf0576a094e2904bea
9697 Author: Markus Klotzbücher <mk@denx.de>
9698 Date: Tue Nov 27 10:23:20 2007 +0100
9700 tools: fix fw_printenv tool to compile again
9702 This patch updates the fw_printenv/fw_setenv userspace tool to include
9703 the correct MTD header in order to compile against current kernel
9704 headers. Backward compatibility is preserved by introducing an option
9705 MTD_VERSION which can be set to "old" for compilation using the old MTD
9706 headers. Along with this a number of warnings are fixed.
9708 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
9710 commit ad3006fe7e84667021753b74247b0bafd97ba35f
9711 Author: Gerald Van Baren <vanbaren@cideas.com>
9712 Date: Mon Jan 7 23:47:32 2008 -0500
9714 LIBFDT: use memmove() instead of memcpy()
9716 This is partial patch from the DTC/libfdt
9717 commit 67b6b33b9b413a450a72135b5dc59c0a1e33e647
9718 Author: David Gibson <david@gibson.dropbear.id.au>
9719 Date: Wed Nov 21 11:56:14 2007 +1100
9721 The patch also fixes one genuine bug caught by valgrind -
9722 _packblocks() in fdt_rw.c was using memcpy() where it should have been
9725 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
9727 commit aec7135bc300e3340d18f203347ee00c5b5f68c0
9728 Author: David Gibson <david@gibson.dropbear.id.au>
9729 Date: Mon Dec 17 14:42:07 2007 +1100
9731 libfdt: Add more documentation (patch the seventh)
9733 This patch adds more documenting comments to libfdt.h. Specifically,
9734 these document the read/write functions (not including fdt_open_into()
9735 and fdt_pack(), for now).
9737 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
9739 commit 9d4450b5adc36623e9c1de1f92539db77ad0c57e
9740 Author: David Gibson <david@gibson.dropbear.id.au>
9741 Date: Mon Dec 17 14:41:52 2007 +1100
9743 libfdt: Add more documentation (patch the sixth)
9745 This patch adds some more documenting comments to libfdt.h.
9746 Specifically this documents all the write-in-place functions.
9748 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
9750 commit b60af3d4c1680487ee37e11aa1b3db6dec04d8f0
9751 Author: Gerald Van Baren <vanbaren@cideas.com>
9752 Date: Sat Dec 29 22:45:27 2007 -0500
9754 Fine grained per property /chosen updating.
9756 Implement a suggestion by Scott Wood to make the /chosen handling fine
9757 grained. Don't overwrite pre-existing properties on a per-property basis,
9758 so if /chosen exists but a necessary /chosen/property doesn't, it gets
9759 created. If a /chosen property exists, it is NOT overwritten unless the
9760 "force" flag is true.
9762 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
9764 commit 238cb7a423c6eaa36496efb788cfb9798cea7f95
9765 Author: Gerald Van Baren <vanbaren@cideas.com>
9766 Date: Sat Jan 5 15:33:29 2008 -0500
9768 Improve the FDT help message.
9770 Add a note that "fdt copy" makes the new address active.
9771 Remove most of the extra hints at the end of the fdt help.
9773 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
9775 commit ea6d8be153ceaf16958f8009cea6d75f3ff58d92
9776 Author: Gerald Van Baren <vanbaren@cideas.com>
9777 Date: Sat Jan 5 14:52:04 2008 -0500
9779 Support setting FDT properties with optional values.
9781 Fix a bug found and documented by Bartlomiej Sieka where the optional
9782 value on "fdt set <path> <prop> [<val>]" wasn't optional.
9784 => fdt mknode / testnode
9785 => fdt print /testnode
9788 => fdt set /testnode testprop
9789 => fdt print /testnode
9794 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
9796 commit 22fb2246df91bfc840d87f0c5910818bad55577a
9797 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9798 Date: Fri Dec 28 11:56:30 2007 +0100
9800 Add fdt_find_and_setprop() to fdt_support.h
9802 fdt_find_and_setprop() is used by several 4xx boards and it's
9803 missing in the appropriate header. This patch eliminates a
9804 warning when building U-Boot for such boards.
9806 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9807 Acked-by: Stefan Roese <sr@denx.de>
9809 commit 802b769bac17b0560d3535a42c502469ee190cd1
9810 Author: Stefan Roese <sr@denx.de>
9811 Date: Tue Jan 8 18:39:30 2008 +0100
9813 ppc4xx: Return 0 on success in 4xx ethernet driver
9815 Signed-off-by: Stefan Roese <sr@denx.de>
9817 commit 6775c68683a53c7abc778774641aac6f833a2cbf
9818 Author: Kim Phillips <kim.phillips@freescale.com>
9819 Date: Tue Jan 8 09:59:49 2008 -0600
9821 mpc83xx: fix missed pci_hose -> hose conversion for new libfdt code
9823 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9825 commit 94fab25f5f1a7d1c0cc63c17e813ea8943fe49c7
9826 Author: Kim Phillips <kim.phillips@freescale.com>
9827 Date: Thu Dec 20 16:28:34 2007 -0600
9829 mpc83xx: rm remaining FLAT_TREE code
9831 ..in board pci.c files
9833 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9835 commit b3458d2cd55d01732e30a76d898afd99e871cd67
9836 Author: Kim Phillips <kim.phillips@freescale.com>
9837 Date: Thu Dec 20 15:57:28 2007 -0600
9839 mpc83xx: remove FLAT_TREE code
9841 need to rm it from pci code, too!
9843 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9845 commit 5b8bc606c61456566af6912f818a153b6b06f242
9846 Author: Kim Phillips <kim.phillips@freescale.com>
9847 Date: Thu Dec 20 14:09:22 2007 -0600
9849 mpc83xx: convert to using do_fixup_*()
9851 convert to using simpler mpc85xx style fdt update code; streamline by
9852 eliminating macros OF_SOC, OF_CPU, etc. which allows us to rm
9853 the old school FLAT_TREE code from 83xx (since the sbc8349 was just
9854 converted over to using libfdt).
9856 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9858 commit e496865ecc31a2fe2f9abfe798334bb02aaf05ab
9859 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
9860 Date: Thu Dec 20 12:58:51 2007 -0500
9862 sbc8349: enable libfdt by default on WRS SBC8349 board.
9864 Make libfdt the default for the WRS SBC8349 board.
9865 Parallel of commit 35cc4e4823668e8745854899cfaedd4489beb0ef
9866 done for the other 83xx based boards. Also fix a typo in CONFIG_PCI.
9868 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
9870 commit 2408b3f20bcbdd9c6c397cd03ab0d71d54680a40
9871 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
9872 Date: Thu Dec 20 12:58:16 2007 -0500
9874 sbc8349: migrate board to libfdt
9876 This adds libfdt support code for the Wind River sbc8349 board.
9878 Parallel of commit 3fde9e8b22cfbd7af489214758f9839a206576cb for
9879 the other Freescale 83xx boards.
9881 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
9883 commit 27a256a90cc86392ac9bf0039a3afe638ec2c18d
9884 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
9885 Date: Thu Dec 20 12:56:19 2007 -0500
9887 sbc8349: Remove board specific ECC code
9889 ECC code is now shared for all 83xx boards, so remove board specific one.
9890 See commit daab8c67d2defef73dc26ab07f0c3afd1b05d019 for reference.
9892 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
9894 commit a1e1ac849249310e5e2e5c7148e9fb353a8317a7
9895 Author: Kim Phillips <kim.phillips@freescale.com>
9896 Date: Thu Dec 20 01:30:48 2007 -0600
9898 mpc83xx: Remove CONFIG options related to OF that we dont use (on 837x)
9900 continuation of commit 37395fa2b0d9d617f28d44ca11592260ef16105a to 837x
9902 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9904 commit ccf21c311e68d48399eff1e72936052885f6e3f7
9905 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
9906 Date: Thu Dec 6 16:43:40 2007 +0100
9908 Add support CONFIG_UEC_ETH3 in MPC83xx
9910 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
9912 commit e6af9932d31171e35db880e7b2f29f903b1b7660
9913 Author: Kumar Gala <galak@kernel.crashing.org>
9914 Date: Mon Nov 26 11:00:54 2007 -0600
9916 Remove CONFIG options related to OF that we dont use
9918 The MPC8360E MDS config defined:
9920 CONFIG_OF_HAS_UBOOT_ENV
9922 Which we don't use or ever needed. This seems like copy-paste feature creep.
9924 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9926 commit f602082b4b7ed4ee16432067cc67a0a24fedc715
9927 Author: Kim Phillips <kim.phillips@freescale.com>
9928 Date: Mon Dec 10 14:16:22 2007 -0600
9930 mpc83xx: supress compiler warning
9932 mpc8360emds.c: In function ‘ft_board_setup’:
9933 mpc8360emds.c:335: warning: assignment discards qualifiers from pointer target type
9934 mpc8360emds.c:345: warning: assignment discards qualifiers from pointer target type
9936 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9938 commit c16e44fa835fb9eec982d919863a04e2f78e5ce7
9939 Author: Kim Phillips <kim.phillips@freescale.com>
9940 Date: Tue Nov 27 14:17:29 2007 -0600
9942 mpc83xx: fix remaining fdt_find_node_by_path references
9944 rename to fdt_path_offset
9946 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9948 commit 921d4b19ad1be704df58725485d9292dc0414adf
9949 Author: Kim Phillips <kim.phillips@freescale.com>
9950 Date: Mon Nov 19 12:30:09 2007 -0600
9952 mpc83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions for 837x
9954 Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for 837x.
9955 This change guarantees that the environment will be located on the
9956 first flash sector after the U-Boot image.
9958 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9960 commit 24f868433b50ecbaa88e118aadc7bd254013c6ae
9961 Author: Kim Phillips <kim.phillips@freescale.com>
9962 Date: Fri Nov 9 14:28:08 2007 -0600
9964 mpc83xx: mpc8360 rev.2.1 erratum 2: replace rgmii-id with rgmii-rxid
9966 u-boot itself uses GMII mode on the 8360. Fix up UCC phy-connection-type
9967 properties in the device tree so the PHY gets configured for internal delay on
9968 RX only by the OS, as prescribed by mpc8360 rev. 2.1 pb mds erratum #2.
9970 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9972 commit 22b448dbfbe2a98f01ff4adc3c3979f8c541ad7b
9973 Author: Dave Liu <r63238@freescale.com>
9974 Date: Tue Sep 18 12:41:15 2007 +0800
9976 mpc83xx: update the CREDITS and MAINTAINERS
9978 update the CREDITS and MAINTAINERS.
9980 Signed-off-by: Dave Liu <daveliu@freescale.com>
9982 commit b21add4b42af7b767448251b599b91066a160e0d
9983 Author: Dave Liu <r63238@freescale.com>
9984 Date: Tue Sep 18 12:40:21 2007 +0800
9986 mpc83xx: add MAINTAINER and MAKEALL entries for the mpc837xemds
9988 Add the MAINTAINER and MAKEALL entries for mpc837xemds
9990 Signed-off-by: Dave Liu <daveliu@freescale.com>
9992 commit f8900ce9094c462355eb792eea264ff16ac8fd16
9993 Author: Dave Liu <r63238@freescale.com>
9994 Date: Tue Sep 18 12:38:53 2007 +0800
9996 mpc83xx: Add the MPC837xEMDS board readme
9998 Add the README.mpc837xemds to /doc
10000 Signed-off-by: Dave Liu <daveliu@freescale.com>
10002 commit 19580e660cc8da49f16536a8bd78c047c7bc12e5
10003 Author: Dave Liu <r63238@freescale.com>
10004 Date: Tue Sep 18 12:37:57 2007 +0800
10006 mpc83xx: Add the support of MPC837xEMDS board
10008 The MPC837xEMDS board support:
10009 * DDR2 400MHz hardcoded and SPD init
10010 * Local bus NOR Flash
10011 * I2C, UART, MII and RTC
10015 Signed-off-by: Dave Liu <daveliu@freescale.com>
10017 commit 555da61702771fe0f76f3de23b4e7590f3704161
10018 Author: Dave Liu <r63238@freescale.com>
10019 Date: Tue Sep 18 12:36:58 2007 +0800
10021 mpc83xx: Add the support of MPC8315E SoC
10023 The MPC8315E SoC including e300c3 core and new IP blocks,
10024 such as TDM, PCI Express and SATA controller.
10026 Signed-off-by: Dave Liu <daveliu@freescale.com>
10028 commit 03051c3d35c9981ceaa059005660e699f3eacf1c
10029 Author: Dave Liu <r63238@freescale.com>
10030 Date: Tue Sep 18 12:36:11 2007 +0800
10032 mpc83xx: Add the support of MPC837x SoC
10034 The MPC837x SoC including e300c4 core and new IP blocks,
10035 such as SDHC, PCI Express and SATA controller.
10037 Signed-off-by: Dave Liu <daveliu@freescale.com>
10039 commit 651d96f7e4c84adcdb98ef07ec878c20326e3359
10040 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
10041 Date: Wed Nov 14 18:54:53 2007 +0300
10043 MPC8360E-MDS: configure and enable second UART
10045 Despite user manual, BCSR9.7 is negated (high) on HRST, so
10046 UART2 is disabled. Fix that and configure QE pins properly.
10048 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
10050 commit b2893e1fcb28fad8c8b317104df8cee0142c7631
10051 Author: Timur Tabi <timur@freescale.com>
10052 Date: Mon Nov 5 09:34:06 2007 -0600
10054 83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions
10056 Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for all of the
10057 currently-defined 83xx boards. This change guarantees that the environment
10058 will be located on the first flash sector after the U-Boot image.
10060 Signed-off-by: Timur Tabi <timur@freescale.com>
10061 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10063 commit e05329516a13616b53240cd85b739217c2bf87f1
10064 Author: Larry Johnson <lrj@acm.org>
10065 Date: Fri Jan 4 13:27:02 2008 -0500
10067 ppc4xx: Remove weak binding from common Denali data-eye search code
10069 Now that there are no board-specific versions of
10070 "denali_core_search_data_eye()", the weak binding on the common version
10073 Signed-off-by: Larry Johnson <lrj@acm.org>
10075 commit 5ba576c01602fd328800a427964c36a0a05c5dce
10076 Author: Stefan Roese <sr@denx.de>
10077 Date: Sat Jan 5 09:13:46 2008 +0100
10079 ppc4xx: Remove unused CONFIG_ECC_ERROR_RESET from 44x_spd_ddr2.c
10081 Signed-off-by: Stefan Roese <sr@denx.de>
10083 commit 845c6c95dbfe6c915ce68a0a115852fa17932fb4
10084 Author: Stefan Roese <sr@denx.de>
10085 Date: Sat Jan 5 09:12:41 2008 +0100
10087 ppc4xx: Update Katmai/44x_spd_ddr2.c code for optimal DDR2 setup
10089 On Katmai the complete auto-calibration somehow doesn't seem to
10090 produce the best results, meaning optimal values for RQFD/RFFD.
10091 This was discovered by GDA using a high bandwidth scope,
10092 analyzing the DDR2 signals. GDA provided a fixed value for RQFD,
10093 so now on Katmai "only" RFFD is auto-calibrated.
10095 This patch also adds RDCC calibration as mentioned on page 7 of
10096 the AMCC PowerPC440SP/SPe DDR2 application note:
10097 "DDR1/DDR2 Initialization Sequence and Dynamic Tuning"
10099 Signed-off-by: Stefan Roese <sr@denx.de>
10101 commit 49db47b8ae6afff2b898be312948ff501357dc80
10102 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10103 Date: Wed Jan 2 16:48:42 2008 +0100
10105 ppc4xx: Remove sdram.h from PMC440 board
10107 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10109 commit 34065a2ce0d8972f2ec6652076014ab243d2ce8a
10110 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10111 Date: Wed Jan 2 16:48:34 2008 +0100
10113 ppc4xx: use common denali core defines and data eye search code for PMC440
10115 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10117 commit 9ac6b6f3d3f1b072d89268b2efe47e95e6659489
10118 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10119 Date: Wed Jan 2 12:05:14 2008 +0100
10121 ppc4xx: More cleanup for esd's LCD code
10123 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10125 commit fe9c26b330a21ce73e52b5bd347d725cb81e3cfb
10126 Author: Stefan Roese <sr@denx.de>
10127 Date: Fri Jan 4 12:00:01 2008 +0100
10129 ppc4xx: Fix Sequoia NAND booting target
10131 The Sequoia NAND booting target now uses the recently extracted
10132 cpu/ppc4xx/denali_data_eye.c file too.
10134 Signed-off-by: Stefan Roese <sr@denx.de>
10136 commit 0ddd969aec532bd7eae30fc09590488a3aaa629a
10137 Author: Lawrence R. Johnson <lrj@acm.org>
10138 Date: Thu Jan 3 15:02:02 2008 -0500
10140 ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Korat board
10142 Signed-off-by: Larry Johnson <lrj@acm.org>
10144 commit b05e8bf58be9d8956fdfde3d8c8e87c140414663
10145 Author: Lawrence R. Johnson <lrj@acm.org>
10146 Date: Fri Jan 4 02:11:56 2008 -0500
10148 ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Sequoia board
10150 Note: this patch changes the configuration of some GPIO registers:
10152 Register Old Value New Value
10153 --------------- ---------- ----------
10154 DCR GPIO0_TCR 0x0000000F 0x0000F0CF
10155 DCR GPIO0_TSRH 0x55005000 0x00000000
10156 DCR GPIO1_TCR 0xC2000000 0xE2000000
10157 DCR GPIO1_TSRL 0x0C000000 0x00200000
10158 DCR GPIO1_ISR2L 0x00050000 0x00110000
10160 Signed-off-by: Larry Johnson <lrj@acm.org>
10162 commit 5ab884b254ca2e707ab50545cd705f30108cf491
10163 Author: Lawrence R. Johnson <lrj@acm.org>
10164 Date: Thu Jan 3 18:54:00 2008 -0500
10166 ppc4xx: Add functionality to GPIO support
10168 This patch makes two additions to GPIO support:
10170 First, it adds function gpio_read_in_bit() to read the a bit from the
10171 GPIO Input Register (GPIOx_IR) in the same way that function
10172 gpio_read_out_bit() reads a bit from the GPIO Output Register
10175 Second, it modifies function gpio_set_chip_configuration() to provide
10176 an additional option for configuring the GPIO from the
10177 "CFG_4xx_GPIO_TABLE".
10179 According to the 440EPx User's Manual, when an alternate output is used,
10180 the three-state control is configured in one of two ways, depending on
10181 the particular output. The first option is to select the corresponding
10182 alternate three-state control in the GPIOx_TRSH/L registers. The second
10183 option is to select the GPIO Three-State Control Register (GPIOx_TCR) in
10184 the GPIOx_TRSH/L registers, and set the corresponding bit in the
10185 GPIOx_TCR register to enable the output. For example, the Manual
10186 specifies configuring the GPIO00 Alternate 1 Signal (PreAddr07) to use
10187 the alternate three-state control (first option), and specifies
10188 configuring the GPIO32 Alternate 1 Signal (USB2OM0) with the output
10189 enabled in the GPIOx_TCR register (second option).
10191 Currently, gpio_set_chip_configuration() configures all alternate signal
10192 outputs to use the first option. This patch allow the second option to
10193 be selected by setting the "out_val" element in the table entry to
10194 "GPIO_OUT_1". The first option is used when the "out_val" element is
10195 set to "GPIO_OUT_0". Because "out_val" is not currently used when an
10196 alternate signal is selected, and because all current GPIO tables set
10197 "out_val" to "GPIO_OUT_0" for all alternate signals, this patch should
10198 not change any existing configurations.
10200 Signed-off-by: Larry Johnson <lrj@acm.org>
10202 commit 196404cdc1de495d6182e84731c200fc5748df15
10203 Author: Larry Johnson <lrj@arlinx.com>
10204 Date: Sun Dec 30 01:01:54 2007 -0500
10206 PPC4xx: Remove sdram.h from board/lwmon5
10208 These definitions are now in "include/ppc440.h".
10210 Signed-off-by: Larry Johnson <lrj@acm.org>
10212 commit ef16fccf96e55eab93fe25d03ebe2e9b56e5332b
10213 Author: Larry Johnson <lrj@arlinx.com>
10214 Date: Sun Dec 30 01:01:32 2007 -0500
10216 PPC4xx: Use common code for LWMON5 board SDRAM support
10218 This patch also modifies the functionality of the code so that the data-eye
10219 search is now done with with the cache disabled.
10221 Signed-off-by: Larry Johnson <lrj@acm.org>
10223 commit 62cc3951ab72135d9c101f1845b794e63a0fa189
10224 Author: Larry Johnson <lrj@arlinx.com>
10225 Date: Sun Dec 30 01:01:14 2007 -0500
10227 PPC4xx: Remove sdram.h from board/amcc/sequoia
10229 These definitions are now in "include/ppc440.h".
10231 Signed-off-by: Larry Johnson <lrj@acm.org>
10233 commit ce3902e1765bbfb07cf5bbe98be9a68e3009996a
10234 Author: Larry Johnson <lrj@arlinx.com>
10235 Date: Sun Dec 30 01:00:50 2007 -0500
10237 PPC4xx: Use common code for Sequoia board SDRAM support
10239 Signed-off-by: Larry Johnson <lrj@acm.org>
10241 commit 8b0c5c127690335758100c25eaec2b84db97c101
10242 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10243 Date: Thu Dec 27 16:58:41 2007 +0100
10245 net: Add CONFIG_NET_DO_NOT_TRY_ANOTHER option
10247 When CONFIG_NET_DO_NOT_TRY_ANOTHER is defined U-Boot's
10248 networking stack does not automatically switch to
10249 another interface. This patch does not touch the default
10252 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10253 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
10255 commit 505be87a65e4f87ad7d8da1d57ea4dcd487d7e32
10256 Author: Upakul Barkakaty <upakul@gmail.com>
10257 Date: Thu Nov 29 12:16:13 2007 +0530
10259 NET: Proper return code handling in eth_init() function in file eth.c
10261 This patch modifies the return code handling in the eth_init()
10262 function, to be compatible with the handling of the return codes in
10263 the other network stack files. It now returns a 0 on Success and -1 on
10266 Signed-off-by: Upakul Barkakaty <upakul.barkakaty@conexant.com>
10267 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
10269 commit 5ca2d0953e4579a80810966cca2077e20d912c97
10270 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
10271 Date: Mon Nov 19 20:27:04 2007 +0900
10273 net/eth.c: Fix env_enetaddr signed overflow
10275 Assigning the output of simple_strtoul(CB:A9:87:65:43:21) to `char', we are
10278 U-Boot 1.2.0 (Aug 30 2007 - 08:27:37)
10286 Warning: NEC-Candy MAC addresses don't match:
10287 Address in SROM is 00:00:4C:80:92:A2
10288 Address in environment is FFFFFFCB:FFFFFFA9:FFFFFF87:65:43:21
10290 This patch changes env_enetaddr type from `char' to `unsigned char'.
10292 Cc: Masaki Ishikawa <ishikawa-masaki@cnt.mxe.nes.nec.co.jp>
10293 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
10294 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
10296 commit f85b60710571b37293d2233933b76e2aa3db5635
10297 Author: Rafal Jaworowski <raj@semihalf.com>
10298 Date: Thu Dec 27 18:19:02 2007 +0100
10300 Introduce new eth_receive routine
10302 The purpose of this routine is receiving a single network frame, outside of
10303 U-Boot's NetLoop(). Exporting it to standalone programs that run on top of
10304 U-Boot will let them utilise networking facilities. For sending a raw frame
10305 the already existing eth_send() can be used.
10307 The direct consumer of this routine is the newly introduced API layer for
10308 external applications (enabled with CONFIG_API).
10310 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
10311 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
10312 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
10314 commit 5c740711f0ea5b51414b341b71597c4a0751be74
10315 Author: Jon Loeliger <jdl@freescale.com>
10316 Date: Thu Jan 3 10:41:04 2008 -0600
10318 8610: Move include of config.h earlier.
10320 Include config.h earlier in the set of #includes
10321 so as to avoid a incidental and duplicate definition
10322 of CFG_CACHELINE_SIZE.
10324 Signed-off-by: Jon Loeliger
10326 commit 61d3421bdea090bd0399b14c3e10a3bebcc8d5ff
10327 Author: Jon Loeliger <jdl@freescale.com>
10328 Date: Tue Dec 4 10:53:34 2007 -0600
10330 Don't slam #undef DEBUG in the 8641HPCN config file.
10332 Doing so prevents it from being individually set
10333 and useful in other files.
10335 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10337 commit ea9f7395ec362584e5e4f266bd0b0c4422cf6a4c
10338 Author: Jon Loeliger <jdl@freescale.com>
10339 Date: Wed Nov 28 14:47:18 2007 -0600
10341 Convert MPC8641HPCN to use libfdt.
10343 Assumes the presence of the aliases node in the DTS to
10344 locate the ethernet, pci and serial nodes for fixups.
10346 Use consistent fdtaddr and fdtfile in environment variables.
10348 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10350 commit ce37422d0002e10490e268392e0c4e3028e52cec
10351 Author: Stefan Roese <sr@denx.de>
10352 Date: Wed Jan 2 14:06:26 2008 +0100
10354 cfi_flash: Fix bug in flash_isset() to use correct 32bit function
10356 This bug was detected on the LWMON5 target which has 2 Intel 16bit wide
10357 flash chips connected to a 32bit wide port.
10359 Signed-off-by: Stefan Roese <sr@denx.de>
10361 commit 1182e9f8e3b92fc372d64943293de53daa2e26cf
10362 Author: Wolfgang Denk <wd@denx.de>
10363 Date: Wed Jan 2 15:58:44 2008 +0100
10365 Fix compile problem introduced by "cleanup" commit 3dfd708c
10367 Signed-off-by: Wolfgang Denk <wd@denx.de>
10369 commit 1aaab9bfae0b3b2ee2b418c22c651280ee7b65c7
10370 Author: Wolfgang Denk <wd@denx.de>
10371 Date: Wed Jan 2 15:54:45 2008 +0100
10373 Make scripts and Makefiles POSIX compliant
10375 The bash builtin versions of the "test" (resp. "[") command allow
10376 using "==" for string comparisons, but POSIX compatible implemen-
10377 tations (like /usr/bin/test) insist on using "=" only. On such systems
10380 $ /usr/bin/test a == a && echo OK
10381 /usr/bin/test: ==: binary operator expected
10383 This patch fixes Makefiles and scripts to use POSIX style.
10385 Signed-off-by: Wolfgang Denk <wd@denx.de>
10387 commit 47cc23cbe9a669c510183f4f049bf703ef445f3b
10388 Author: Stefan Roese <sr@denx.de>
10389 Date: Wed Jan 2 14:05:37 2008 +0100
10391 cfi_flash: Fix bug in flash_isset() to use correct 32bit function
10393 This bug was detected on the LWMON5 target which has 2 Intel 16bit wide
10394 flash chips connected to a 32bit wide port.
10396 Signed-off-by: Stefan Roese <sr@denx.de>
10398 commit 3dfd708cc1b2a966ad454ca9ed125dd17dbadbcc
10399 Author: Wolfgang Denk <wd@denx.de>
10400 Date: Wed Jan 2 12:38:43 2008 +0100
10402 Minor coding style cleanup.
10404 Signed-off-by: Wolfgang Denk <wd@denx.de>
10406 commit e174ac34adf5d5653df12bc3cf19c52063a71269
10407 Author: Stefan Roese <sr@denx.de>
10408 Date: Fri Dec 28 17:29:56 2007 +0100
10410 ppc4xx: Coding style cleanup
10412 Signed-off-by: Stefan Roese <sr@denx.de>
10414 commit 8ba132cab18ae438b6dd5b0214c28a8fc0d976e5
10415 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10416 Date: Fri Dec 28 17:07:24 2007 +0100
10418 ppc4xx: Complete PMC440 board support
10420 This patch brings the PMC440 board configuration file.
10421 Finally it enables the PMC440 board support.
10423 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10425 commit 407843a582560fc5231299561ab3c2b6b6cd3397
10426 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10427 Date: Fri Dec 28 17:07:18 2007 +0100
10429 ppc4xx: Add FPGA support and BSP commands for PMC440 boards
10431 This patch adds some BSP commands and FPGA booting support
10432 for esd's PMC440 boards.
10434 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10436 commit 72c5d52aedcce35e4b4fa5895605554825b6a76f
10437 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10438 Date: Fri Dec 28 17:07:14 2007 +0100
10440 ppc4xx: Add initial esd PMC440 board files
10442 This patch adds the first files for the new esd PMC440 boards.
10443 The next two patches will complete the PMC440 board support.
10445 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10447 commit f6e0f1f61896ce7729ba1bcea2ffbd138d3947f5
10448 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10449 Date: Fri Dec 28 17:10:36 2007 +0100
10451 ppc4xx: Add EEPROM write protection for PLU405 boards + misc. updates
10453 - add EEPROM write protection for esd PLU405 boards.
10454 - initialize NAND GPIOs
10455 - use correct io accessors
10458 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10460 commit 77660c4b59055d621d2a8595bd4c18bb277268fc
10461 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10462 Date: Fri Dec 28 17:10:44 2007 +0100
10464 ppc4xx: use correct io accessors for esd's LCD code
10466 This patch fixes esd's LCD dectection code to work correctly with
10467 newer gcc versions.
10469 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10471 commit b56bd0fcfc1c73db722e3462c8a9bf607ba7775e
10472 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10473 Date: Fri Dec 28 17:10:42 2007 +0100
10475 ppc4xx: Maintenance patch for VOH405 boards
10477 - add EEPROM write protection
10478 - initialize NAND GPIOs
10479 - use correct io accessors
10480 - slow down I2C clock to 100kHz
10481 - enable ext. I2C bus
10484 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10486 commit c05569066dbcba3fdf36d4d1943df265dc316a86
10487 Author: Stefan Roese <sr@denx.de>
10488 Date: Fri Dec 28 16:08:08 2007 +0100
10490 ppc4xx: Enable 405EP PCI arbiter per default on all boards
10492 In an attmemt to clean up the 4xx start.S file, I removed the enabling
10493 of the internal 405EP PCI arbiter. This is needed for multiple other
10494 405EP platforms, like most of the esd 405EP. Now the internal PCI
10495 arbiter is enabled again per default as it has been before.
10497 Signed-off-by: Stefan Roese <sr@denx.de>
10498 Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10500 commit bec9264616fb78273a1d93e87ff4b0b67c7bec1b
10501 Author: Stefan Roese <sr@denx.de>
10502 Date: Fri Dec 28 15:53:46 2007 +0100
10504 ppc4xx: Fix bug in cpu_init.c (405EP instead of 450EP)
10506 Signed-off-by: Stefan Roese <sr@denx.de>
10507 Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10509 commit fb83a65c60ab5ca12358b75f1257e5eee6cdbf79
10510 Author: Stefan Roese <sr@denx.de>
10511 Date: Fri Dec 28 06:06:04 2007 +0100
10513 ppc4xx: Fix compilation problem of kilauea/haleakala nand booting target
10515 Use correct link to nand_ecc now located in drivers/mtd/nand/ for the
10516 platforms mentioned above.
10518 Signed-off-by: Stefan Roese <sr@denx.de>
10520 commit b568fd25574181a3b12ae3d66b2913903442cb83
10521 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10522 Date: Thu Dec 27 17:03:46 2007 +0100
10524 Remove CPCI440 board
10526 This board never left prototyping state and it
10527 became a millstone round my neck. So remove it.
10529 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10531 commit c591dffe0cbacd896ccbad06011fe6d6afa080da
10532 Author: Larry Johnson <lrj@arlinx.com>
10533 Date: Thu Dec 27 11:28:51 2007 -0500
10535 Add support for Korat PPC440EPx board
10537 These patches add support for the PPC440EPx-based "Korat" board to
10538 U-Boot. They are based primarily on support for the Sequoia board.
10540 Signed-off-by: Larry Johnson <lrj@acm.org>
10542 commit 87dc096829e6a6363f4fdd73653b0093a85adbe0
10543 Author: Larry Johnson <lrj@arlinx.com>
10544 Date: Sat Dec 22 15:16:25 2007 -0500
10546 Add configuration file for Korat board
10548 This patch supplies the configuration file for the Korat PPC440EPx-
10551 Signed-off-by: Larry Johnson <lrj@acm.org>
10553 commit 8eb52d5d982b764b39c88d9d1064d56c5397bfa5
10554 Author: Larry Johnson <lrj@arlinx.com>
10555 Date: Sat Dec 22 15:16:11 2007 -0500
10557 Add denali_data_eye.o and denali_spd_ddr2.o to PPC4xx Makefile
10559 Signed-off-by: Larry Johnson <lrj@acm.org>
10561 commit aba19604d848b2838cfb9ebe818909e6a216058e
10562 Author: Larry Johnson <lrj@arlinx.com>
10563 Date: Thu Dec 27 10:54:48 2007 -0500
10565 Add 440EPx DDR2 SPD DIMM support
10567 This patch adds SPD DDR2 support for the 440EPx ("Denali") SDRAM
10568 controller. It should also work on the 440GRx. It is based on the DDR2
10569 SPD code for the 440EP/440EPx, but makes no provision for DDR1 support.
10571 This code has been tested on prototype Korat boards with three Kingston
10572 DIMMS: 512 MiB ECC (one rank), 512 MiB non-ECC (one rank) and 1 GiB ECC
10573 (two ranks). The Korat board has a single DIMM socket, but support has
10574 been provided (though not tested) for boards with two DIMM sockets.
10576 Signed-off-by: Larry Johnson <lrj@acm.org>
10578 commit 8a24a6963002cb867d5a6b70e3560f0b1467f55f
10579 Author: Larry Johnson <lrj@arlinx.com>
10580 Date: Sat Dec 22 15:15:30 2007 -0500
10582 Copy 440EPx/GRx SDRAM data-eye search to common directory
10584 This patch creates a non-board-specific file for performing the SDRAM
10585 data-eye search. It also adds ECC error checking to the test of valid
10586 data on readback when ECC is enabled.
10588 Signed-off-by: Larry Johnson <lrj@acm.org>
10590 commit c46f53333b22b1f9098676bea8884fc7db820cf3
10591 Author: Larry Johnson <lrj@arlinx.com>
10592 Date: Sat Dec 22 15:15:13 2007 -0500
10594 Add definitions for 440EPx/GRx SDRAM controller to ppc440.h
10596 This patch adds the Denali SDRAM controller definitions to "ppc440.h".
10597 It also fixes two typos in the definitions, so the board-specific
10598 "sdram.h" files containing these definitions are also fixed to avoid
10601 Signed-off-by: Larry Johnson <lrj@acm.org>
10603 commit c348578bf612d0c56d8d376d23cae16defbd86af
10604 Author: Larry Johnson <lrj@arlinx.com>
10605 Date: Thu Dec 27 10:50:55 2007 -0500
10607 Add Ethernet 1000BASE-X support for PPC4xx
10609 This patch adds a new switch: "CONFIG_PHY_DYNAMIC_ANEG". When this symbol
10610 is defined, the PHY will advertise it's capabilities for autonegotiation
10611 based on the capabilities shown in the PHY's status registers, including
10612 1000BASE-X. When "CONFIG_PHY_DYNAMIC_ANEG" is not defined, the PHY will
10613 advertise hard-coded capabilities, as before.
10615 Signed-off-by: Larry Johnson <lrj@acm.org>
10617 commit 9e2c347151db5ae8acf5f18b99493cd53e6637e3
10618 Author: Larry Johnson <lrj@arlinx.com>
10619 Date: Thu Dec 27 09:52:17 2007 -0500
10621 Add driver for National Semiconductor LM73 temperature sensor
10623 This driver is based on the driver for the LM75.
10625 Signed-off-by: Larry Johnson <lrj@acm.org>
10627 commit 12618278688ea9b3d76536960a5ad2e3790fac40
10628 Author: Larry Johnson <lrj@arlinx.com>
10629 Date: Sat Dec 22 15:14:00 2007 -0500
10631 Add driver for STMicroelectronics M41T60 RTC
10633 This driver is based on the driver for the M41T11. In the intended
10634 application, the RTC will be powered by a large capacitor, rather than a
10635 battery. The driver therefore checks to see whether the RTC has lost
10636 power. The chip's OUT bit is normally reset from its power-up state. If
10637 the OUT bit is read as set, or if the date and time are not valid, then the
10638 RTC is assumed to have lost power, and its date and time are reset to
10639 1900-01-01 00:00:00.
10641 Support for adjusting the speed of the clock to improve accuracy is
10642 provided through an environment variable.
10644 Signed-off-by: Larry Johnson <lrj@acm.org>
10646 commit d3471173e14b7544bb60339eda8d3d3906694b0a
10647 Author: Larry Johnson <lrj@arlinx.com>
10648 Date: Sat Dec 22 15:34:39 2007 -0500
10650 Use out_be32() and friends to access memory-mapped registers in sequoia.c
10652 Signed-off-by: Larry Johnson <lrj@acm.org>
10654 commit c68f59fe3ec16769f82b5fca7421983c336d3aac
10655 Author: Larry Johnson <lrj@arlinx.com>
10656 Date: Sat Dec 22 15:34:20 2007 -0500
10658 Use definitions from "asm-ppc/mmu.h" in init.S for Sequoia
10660 Signed-off-by: Larry Johnson <lrj@acm.org>
10662 commit 0d9cdeac1d3fa8d62ed7d883acc950c364f5bda8
10663 Author: Larry Johnson <lrj@arlinx.com>
10664 Date: Sat Dec 22 15:23:50 2007 -0500
10666 Cosmetic changes to ECC POST for AMCC Denali core
10668 Signed-off-by: Larry Johnson <lrj@acm.org>
10670 commit 2e583d6c81034f80a267b89fa55498ae063ccef1
10671 Author: Stefan Roese <sr@denx.de>
10672 Date: Wed Dec 26 20:20:19 2007 +0100
10674 ppc4xx: Fix compilation problem in 405 cache POST test
10676 Signed-off-by: Stefan Roese <sr@denx.de>
10678 commit 42d55ea0bde06e47d5a3b49b0d91002acd8e5708
10679 Author: Stefan Roese <sr@denx.de>
10680 Date: Sat Dec 22 12:20:09 2007 +0100
10682 ppc4xx: Move virtual address of POST cache test to bigger address
10684 On Sequoia & LWMON5 the virtual address of the POST cache test is now
10685 moved to a bigger address. This enables usage of more memory on those
10688 Signed-off-by: Stefan Roese <sr@denx.de>
10690 commit d91722102cf63f77a0148ed3f3d54a26d87575e9
10691 Author: Stefan Roese <sr@denx.de>
10692 Date: Sat Dec 22 12:18:26 2007 +0100
10694 ppc4xx: Fix problem in 44x cache POST routine
10696 As repoted by Larry Johnson, running "diag run cache" caused a crash
10697 in U-Boot. This problem was introduced by a patch that removed the
10698 TLB entry for the cache test after the test has completed. Since this
10699 TLB was only setup once, a 2nd attempt to run this cache test
10700 failed with a crash. Now this TLB entry is created every time the
10703 Signed-off-by: Stefan Roese <sr@denx.de>
10705 commit b0265b576bb8fa9465f99e99c323768b562fadc2
10706 Author: Stefan Roese <sr@denx.de>
10707 Date: Fri Dec 21 07:51:29 2007 +0100
10709 ppc4xx: Update Makalu fdt support
10711 Signed-off-by: Stefan Roese <sr@denx.de>
10713 commit bf8324e4a50758daff8cddd04c6a2ff8ed775bea
10714 Author: Stefan Roese <sr@denx.de>
10715 Date: Wed Dec 19 09:05:40 2007 +0100
10717 ppc4xx: Add fdt support to AMCC Katmai eval board
10719 Signed-off-by: Stefan Roese <sr@denx.de>
10721 commit 328a340392a5df9aaf00792be989df73e750859e
10722 Author: Stefan Roese <sr@denx.de>
10723 Date: Tue Dec 18 08:44:51 2007 +0100
10725 ppc4xx: fdt: Cleanup setup of cpu node setup
10727 Now the cpu node setup ("timebase-frequency" and "clock-frequency") is
10728 without using the absolute path to the cpu node. This makes it possible
10729 to use this U-Boot version with both versions of cpu-node naming
10730 "cpu@0" and the former "PowerPC,440EPx@0".
10732 Signed-off-by: Stefan Roese <sr@denx.de>
10734 commit 7812bc4a2e2436ebbc0ce5b4e99c1dfc2e77eb5b
10735 Author: Stefan Roese <sr@denx.de>
10736 Date: Mon Dec 17 17:26:21 2007 +0100
10738 ppc4xx: Fix lwmon5 compilation problem
10740 Now that the 440EPx ECC test is not board specific anymore
10741 remove this Makefile.
10743 Signed-off-by: Stefan Roese <sr@denx.de>
10745 commit 42ed33ffe135f618680f9d6e9712eb35a85bcb62
10746 Author: Anatolij Gustschin <agustschin@t-online.de>
10747 Date: Wed Dec 5 17:43:20 2007 +0100
10749 Fix ppc4xx clear_bss() code
10751 ppc4xx clear_bss() fails if BSS segment size is not
10752 divisible by 4 without remainder. This patch provides
10753 fix for this problem.
10755 Signed-off-by: Anatolij Gustschin <agust@denx.de>
10757 commit 85dc2a7f82d11e17f0ca2a448118aed7f7a4b85d
10758 Author: Niklaus Giger <niklausgiger@gmx.ch>
10759 Date: Fri Nov 30 18:35:11 2007 +0100
10761 PPC4xx: Minimal changes to add vxWorks support
10763 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
10765 commit 052440b022ca8981d39b6f8c10d1aa6326f47480
10766 Author: Markus Klotzbücher <mk@denx.de>
10767 Date: Fri Nov 23 13:09:18 2007 +0100
10769 ppc4xx: Add CONFIG_BOOTP_SUBNETMASK to Sequoia board config
10771 When using dhcp/bootp the "netmask" environment variable is not
10772 set because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is
10773 desireable, so the following patch adds this this option to the board
10776 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
10777 Signed-off-by: Stefan Roese <sr@denx.de>
10779 commit a724a9b40c7fbeb6ade193ca52321b441eaecb4e
10780 Author: Larry Johnson <lrj@arlinx.com>
10781 Date: Sat Oct 27 12:48:15 2007 -0400
10783 Fix/enhance ECC POST for 440EPx/GRx
10785 This patch allows the ECC POST to be used for different boards with the
10786 PPC440 Denali SDRAM controller. Modifications include skipping the test
10787 if ECC is not enabled (as for non-ECC DIMMs) and adding synchronization
10788 to prevent timing errors.
10790 Signed-off-by: Larry Johnson <lrj@acm.org>
10792 commit 454a6cf8d498f70d2b3e18f07837603eb24b12d4
10793 Author: Larry Johnson <lrj@arlinx.com>
10794 Date: Sat Oct 27 12:48:05 2007 -0400
10796 PPC4xx: Move/rename ECC POST for 440EPx/GRx
10798 Signed-off-by: Larry Johnson <lrj@acm.org>
10800 commit c29d2d3680046d430022c55e50fcb27f5866517e
10801 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10802 Date: Fri Dec 14 11:20:33 2007 +0100
10804 ppc4xx: use correct io accessors for 4xx ethernet POST
10806 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10808 commit ba79fde58a48c0a6ff8e2a96caba951594142203
10809 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10810 Date: Fri Dec 14 11:19:56 2007 +0100
10812 ppc4xx: fix flush + invalidate_dcache_range arguments
10814 flush + invalidate_dcache_range() expect the start and stop+1 address.
10815 So the stop address is the first address behind (!) the range.
10817 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10819 commit 871e6ce188a7c6bc7321bcf8372857035d20f1cd
10820 Author: Stefan Roese <sr@denx.de>
10821 Date: Fri Dec 14 08:41:29 2007 +0100
10823 ppc4xx: fdt: use fdt_fixup_ethernet()
10825 By using aliases in the dts file, the ethernet node fixup is
10826 much easier with the recently added functions.
10828 Please note that the dts file needs the aliases for this to work.
10830 Signed-off-by: Stefan Roese <sr@denx.de>
10832 commit 136288847e3b04f2ff357a067ad45e10afa0a24c
10833 Author: Stefan Roese <sr@denx.de>
10834 Date: Thu Dec 13 14:52:53 2007 +0100
10836 ppc4xx: Bring 4xx fdt support up-to-date
10838 This patch update the 4xx fdt support. It enabled fdt booting
10839 on the AMCC Kilauea and Sequoia for now. More can follow later
10842 Signed-off-by: Stefan Roese <sr@denx.de>
10844 commit 0dc80e2759fba859ccc4cdadc633577ca2971f3e
10845 Author: Stefan Roese <sr@denx.de>
10846 Date: Thu Dec 27 07:50:54 2007 +0100
10848 cfi_flash: Add missing check for erased dest to flash_write_cfibuffer()
10850 The check for an sufficiently erased destination was missing in the
10851 buffered write function of the cfi flash driver (when
10852 CFG_FLASH_USE_BUFFER_WRITE is defined). This patch adds this check to that
10853 writing to such a region will fail with the currect error message.
10855 Signed-off-by: Stefan Roese <sr@denx.de>
10857 commit 33ed73bc0e38d0f2b5c183d4629d8f207e5b9994
10858 Author: Martin Krause <martin.krause@tqs.de>
10859 Date: Mon Nov 12 10:56:17 2007 +0100
10861 Some configuration updates for the TQM5200 based TB5200 board:
10863 - enable command line history
10864 - increase malloc space (because of bigger flash sectors)
10866 Signed-off-by: Martin Krause <martin.krause@tqs.de>
10868 commit e318d9e9021a0af7508171f84ed09d0e79f0284e
10869 Author: Martin Krause <martin.krause@tqs.de>
10870 Date: Thu Sep 27 11:10:08 2007 +0200
10872 TQM8xx: use the CFI flash driver on all TQM8xx boards
10874 Signed-off-by: Martin Krause <martin.krause@tqs.de>
10876 commit 11d9eec479b470eab9242ab937fca70a876d9376
10877 Author: Martin Krause <martin.krause@tqs.de>
10878 Date: Wed Sep 26 17:55:56 2007 +0200
10880 TQM885D: adjust for doubled flash sector size + some minor fixes
10882 Signed-off-by: Martin Krause <martin.krause@tqs.de>
10884 commit 22d1a56cbfb0bff34f477b4db6a55d076d829b83
10885 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
10886 Date: Wed Sep 26 17:55:54 2007 +0200
10888 TQM885D: Exchanged SDRAM timing by a more relaxed timing.
10890 CAS-Latency=2, Write Recovery Time tWR=2
10891 The max. supported bus frequency is 66 MHz. Therefore, changed
10892 threshold to switch from 1:1 mode to 2:1 from 80 MHz to 66 MHz.
10894 Signed-off-by: Martin Krause <martin.krause@tqs.de>
10896 commit b988b8cd443989be65161888eea0127ad03f846f
10897 Author: Martin Krause <martin.krause@tqs.de>
10898 Date: Wed Sep 26 17:55:56 2007 +0200
10900 TQM885D: use calculated cpuclk instead of measuring it
10902 On the TQM885D the measurement of cpuclk with the PIT reference
10903 timer ist not necessary. Since all module variants use the same
10904 external 10 MHz oscillator, the cpuclk only depends on the PLL
10905 configuration - which is readable by software.
10907 Signed-off-by: Martin Krause <martin.krause@tqs.de>
10909 commit 492c7049869348d31168de8dad89651315e468e0
10910 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
10911 Date: Thu Sep 27 14:54:46 2007 +0200
10913 TQM885D: fix SDRAM refresh
10915 At 133 MHz the current SDRAM refresh rate is too fast
10916 (measured 4 * 1.17 us).
10917 CFG_MAMR_PTA changes from 39 to 128. This result
10918 in a refresh rate of 4 * 7.8 us at the default clock
10919 66 MHz. At 133 MHz the value will be then 4 * 3.8 us.
10920 This is a compromise until a new method is found to
10921 adjust the refresh rate.
10923 Signed-off-by: Martin Krause <martin.krause@tqs.de>
10925 commit dabad4b9bc46908e301f73ce76b38b23626a96e9
10926 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
10927 Date: Thu Sep 27 14:54:46 2007 +0200
10929 TQM860M: Support for 10col SDRAMs, max. 128 MiB
10931 Signed-off-by: Martin Krause <martin.krause@tqs.de>
10933 commit 61fb15c516fef5631e305f1976d7b3a679725856
10934 Author: Wolfgang Denk <wd@denx.de>
10935 Date: Thu Dec 27 01:52:50 2007 +0100
10937 Fix coding style issues; update CHANGELOG.
10939 Signed-off-by: Wolfgang Denk <wd@denx.de>
10941 commit 467bcee11fe26ad422f2de971aa70866079870f2
10942 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
10943 Date: Fri Dec 14 15:36:18 2007 +0100
10945 cfi_flash: Add manufacturer-specific fixups
10947 Run fixups based on the JEDEC manufacturer ID independent of the
10950 This changes current behaviour: Previously, geometry reversal for AMD
10951 chips were done based on the command set ID, while they are now done
10952 based on the JEDEC manufacturer and device ID.
10954 Also add fixup for top-boot Atmel chips. A fixup is needed for
10955 AT49BV6416(T) too, but since u-boot currently only reads the low byte
10956 of the device ID, there's no way to tell it apart from AT49BV642D,
10957 which should not have this fixup. Since AT49BV642D support is
10958 necessary to get ATNGW100 board support into mainline, I've commented
10959 out the fixup for now.
10961 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
10963 commit 0ddf06ddf6b4bd057ad4c5f0dffea7870ba06a2a
10964 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
10965 Date: Fri Dec 14 15:36:17 2007 +0100
10967 cfi_flash: Add cmdset-specific init functions
10969 Move things like reading JEDEC IDs and fixing up geometry reversal
10970 into separate functions. The geometry reversal fixup is now performed
10971 by altering the qry structure directly, which makes the sector init
10972 code slightly cleaner.
10974 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
10976 commit e23741f4a6d8047520ef0d4971762749b3587d32
10977 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
10978 Date: Fri Dec 14 15:36:16 2007 +0100
10980 cfi_flash: Read whole QRY structure in one go
10982 Read out the whole CFI Standard Query structure after successful cfi
10983 identification. This allows subsequent code to access this information
10984 directly without having to go through flash_read_uchar() and friends.
10986 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
10988 commit df9c25ea04b38a0e05d4f8c73c5cc144cdafa7db
10989 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
10990 Date: Mon Dec 17 11:02:44 2007 +0100
10992 AVR32: Fix logic inversion in disable_interrupts()
10994 disable_interrupts() should return nonzero if interrupts were
10995 _enabled_ before, not disabled.
10997 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
10999 commit acac475212cbedb17b321a363a1c878e2b47b37f
11000 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
11001 Date: Fri Dec 14 16:51:22 2007 +0100
11003 AVR32: Enable interrupts at bootup
11005 The timer code depends on the timer interrupt to keep track of the
11006 upper 32 bits of the cycle counter. This obviously doesn't work when
11007 interrupts are disabled the whole time.
11009 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
11011 commit 9570bcd87f4db255514f43b6701746c412f8fef0
11012 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
11013 Date: Thu Nov 15 10:03:45 2007 +0100
11015 AVR32: Fix wrong pin setup for USART3
11017 As reported by Gerhard Berghofer:
11019 in "gpio_enable_usart3" the correct pins for USART 3 are PB17 and PB18
11020 instead of PB18 and PB19.
11022 which is obviously correct. There's currently no code that uses
11023 USART3, but custom boards may run into problems.
11025 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
11027 commit 09ea0de03dcc3ee7af045b0b572227bda2c1c918
11028 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
11029 Date: Thu Nov 1 12:44:20 2007 +0100
11031 README: Remove ATSTK1000 daughterboard list
11033 As noted by Kim Phillips, these lists tend to become out of date.
11035 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
11037 commit c81cbbad21cb0ae983e2e796211202234cdc8be2
11038 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
11039 Date: Tue Oct 30 14:56:36 2007 +0100
11041 Add ATSTK100[234] to MAINTAINERS
11043 Add all the ATSTK1000 daughterboards to MAINTAINERS along with their
11044 "mother". Also update the entry for ATSTK1000 to be not only about the
11045 AP7000 CPU; it's intended to handle all CPUs in the AT32AP family.
11047 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
11049 commit 64ff2357b1727213803591813dbc779c924bf772
11050 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
11051 Date: Mon Oct 29 13:02:54 2007 +0100
11053 AVR32: Add support for the ATSTK1004 board
11055 ATSTK1004 is a daughterboard for ATSTK1000 with the AT32AP7002 CPU,
11056 which is a derivative of AT32AP7000.
11058 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
11060 commit 667568db157f374b85abd7e03596ddd1f0b25681
11061 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
11062 Date: Mon Oct 29 13:02:54 2007 +0100
11064 AVR32: Add support for the ATSTK1003 board
11066 ATSTK1003 is a daughterboard for ATSTK1000 with the AT32AP7001 CPU,
11067 which is a derivative of AT32AP7000.
11069 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
11071 commit 5fee84a794a51ec830548cda485a770efb018b92
11072 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
11073 Date: Mon Oct 29 13:23:33 2007 +0100
11075 AVR32: Make some AT32AP700x peripherals optional
11077 Add a chip-features file providing definitions of the form
11079 AT32AP700x_CHIP_HAS_<peripheral>
11081 to indicate the availability of the given peripheral on the currently
11084 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
11086 commit 36f28f8a9605ee5dcfa330482cfc62171261af97
11087 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
11088 Date: Mon Oct 29 13:09:56 2007 +0100
11090 AVR32: Rename at32ap7000 -> at32ap700x
11092 The SoC-specific code for all the AT32AP700x CPUs is practically
11093 identical; the only difference is that some chips have less features
11094 than others. By doing this rename, we can add support for the AP7000
11095 derivatives simply by making some features conditional.
11097 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
11099 commit 4d5fa99c73f354e7cf985efcf417ea55ca2f6a5e
11100 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
11101 Date: Fri Jun 29 18:22:34 2007 +0200
11103 atmel_mci: Show SR when block read fails
11105 Show controller status as well as card status when an error occurs
11108 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
11110 commit 8697e6a19b10f514511b6a9c86de88bd108c4f8d
11111 Author: Stefan Roese <sr@denx.de>
11112 Date: Thu Dec 13 14:52:53 2007 +0100
11114 ppc4xx: Bring 4xx fdt support up-to-date
11116 This patch update the 4xx fdt support. It enabled fdt booting
11117 on the AMCC Kilauea and Sequoia for now. More can follow later
11120 Signed-off-by: Stefan Roese <sr@denx.de>
11122 commit 12d30aa79779c2aa7a998bbae4c075f822a53004
11123 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
11124 Date: Thu Dec 13 12:56:34 2007 +0100
11126 cfi_flash: Use map_physmem() and unmap_physmem()
11128 Use map_physmem() and unmap_physmem() to convert from physical to
11129 virtual addresses. This gives the arch a chance to provide an uncached
11130 mapping for flash accesses.
11132 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
11134 commit 4d7d6936eb29af7cca330937808312aa5f61454d
11135 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
11136 Date: Thu Dec 13 12:56:33 2007 +0100
11138 Introduce map_physmem() and unmap_physmem()
11140 map_physmem() returns a virtual address which can be used to access a
11141 given physical address without involving the cache. unmap_physmem()
11142 should be called when the virtual address returned by map_physmem() is
11145 This patch adds a stub implementation which simply returns the
11146 physical address cast to a uchar * for all architectures except AVR32,
11147 which converts the physical address to an uncached virtual mapping.
11148 unmap_physmem() is a no-op on all architectures, but if any
11149 architecture needs to do such mappings through the TLB, this is the
11150 hook where those TLB entries can be invalidated.
11152 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
11154 commit cdbaefb5f5f03e54455d0439dcf6dbd97ead1f9d
11155 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
11156 Date: Thu Dec 13 12:56:32 2007 +0100
11158 cfi_flash: Introduce read and write accessors
11160 Introduce flash_read{8,16,32,64) and flash_write{8,16,32,64} and use
11161 them to access the flash memory. This makes it clearer when the flash
11162 is actually being accessed; merely dereferencing a volatile pointer
11163 looks just like any other kind of access.
11165 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
11167 commit 812711ce6b3a386125dcf0d6a59588e461abbb87
11168 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
11169 Date: Thu Dec 13 12:56:31 2007 +0100
11171 Implement __raw_{read,write}[bwl] on all architectures
11173 This adds implementations of __raw_read[bwl] and __raw_write[bwl] to
11174 m68k, ppc, nios and nios2. The m68k and ppc implementations were taken
11177 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
11179 commit be60a9021c82fc5aecd5b2b1fc96f70a9c81bbcd
11180 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
11181 Date: Sat Oct 6 18:55:36 2007 +0200
11183 cfi_flash: Reorder functions and eliminate extra prototypes
11185 Reorder the functions in cfi_flash.c so that each function only uses
11186 functions that have been defined before it. This allows the static
11187 prototype declarations near the top to be eliminated and might allow
11188 gcc to do a better job inlining functions.
11190 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
11192 commit 3055793bcbdf24b1f8117f606ffb766d32eb766f
11193 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
11194 Date: Thu Dec 13 12:56:29 2007 +0100
11196 cfi_flash: Make some needlessly global functions static
11198 Make functions not declared in any header file static.
11200 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
11202 commit 7e5b9b471518c5652febc68ba62b432193d6abf4
11203 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
11204 Date: Thu Dec 13 12:56:28 2007 +0100
11206 cfi_flash: Break long lines
11208 This patch tries to keep all lines in the cfi_flash driver below 80
11209 columns. There are a few lines left which don't fit this requirement
11210 because I couldn't find any trivial way to break them (i.e. it would
11211 take some restructuring, which I intend to do in a later patch.)
11213 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
11215 commit 42026c9cb3a76849b41e6e24abfb7b56807a5c1a
11216 Author: Bartlomiej Sieka <tur@semihalf.com>
11217 Date: Tue Dec 11 13:59:57 2007 +0100
11219 CFI: synchronize command offsets with Linux CFI driver
11221 Fixes non-working CFI Flash on the Inka4x0 board.
11223 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
11225 commit 8ff3de61fc5f9b3b21647bce081a3b7f710f0d4d
11226 Author: Kumar Gala <galak@kernel.crashing.org>
11227 Date: Fri Dec 7 12:17:34 2007 -0600
11229 Handle MPC85xx PCIe reset errata (PCI-Ex 38)
11231 On the MPC85xx boards that have PCIe enable the PCIe errata fix.
11232 (MPC8544DS, MPC8548CDS, MPC8568MDS).
11234 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11236 commit 82ac8c97145a4c3bf8b3dbfad00fa96e920f9b9c
11237 Author: Kumar Gala <galak@kernel.crashing.org>
11238 Date: Fri Dec 7 12:04:30 2007 -0600
11240 Update Freescale MPC85xx ADS/CDS/MDS board config
11242 * Enabled CONFIG_CMD_ELF
11244 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11246 commit d435793229ce29a42797c1edc39f5b34f987f91a
11247 Author: Kumar Gala <galak@kernel.crashing.org>
11248 Date: Fri Dec 7 04:59:26 2007 -0600
11250 Handle Asynchronous DDR clock on 85xx
11252 The MPC8572 introduces the concept of an asynchronous DDR clock with
11253 regards to the platform clock.
11255 Introduce get_ddr_freq() to report the DDR freq regardless of sync/async
11258 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11260 commit 22abb2d2eaf7b795a6923c6273ec9cb53fda9a10
11261 Author: Kumar Gala <galak@kernel.crashing.org>
11262 Date: Thu Nov 29 10:34:28 2007 -0600
11264 Update Freescale MPC85xx ADS/CDS/MDS board config
11266 * Removed some misc environment setup
11267 * Enabled CONFIG_CMDLINE_EDITING
11269 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11271 commit 415a613babb84d5e5d5b42e8e553868c71fc3a64
11272 Author: Kumar Gala <galak@kernel.crashing.org>
11273 Date: Thu Nov 29 10:47:44 2007 -0600
11275 Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale.
11277 Minor path corrections needed to ensure buildability.
11279 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11281 commit c2d943ffbfd3359b3b45d177b437379d2cb86fbf
11282 Author: Kumar Gala <galak@kernel.crashing.org>
11283 Date: Thu Nov 29 10:16:18 2007 -0600
11285 Move the MPC8540 ADS board under board/freescale.
11287 Minor path corrections needed to ensure buildability.
11289 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11291 commit 870ceac5b3a3486c109396e005af81ae762b5710
11292 Author: Kumar Gala <galak@kernel.crashing.org>
11293 Date: Thu Nov 29 10:14:50 2007 -0600
11295 Move the MPC8560 ADS board under board/freescale.
11297 Minor path corrections needed to ensure buildability.
11299 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11301 commit acbca876fb3fec25cd9c55b0efc81ff618ff5262
11302 Author: Kumar Gala <galak@kernel.crashing.org>
11303 Date: Thu Nov 29 10:13:47 2007 -0600
11305 Move the MPC8568 MDS board under board/freescale.
11307 Minor path corrections needed to ensure buildability.
11309 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11311 commit a853d56c59b33415304531443633808736acfc6e
11312 Author: Kumar Gala <galak@kernel.crashing.org>
11313 Date: Thu Nov 29 02:18:59 2007 -0600
11315 Use standard LAWAR_TRGT_IF_* defines for LAW setup on 85xx
11317 We already had defines for LAWAR_TRGT_IF_* that we should use
11318 rather than creating new ones. Also, added some missing defines for
11321 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11323 commit 04db400892da37b76a585e332a0c137954ad2015
11324 Author: Kumar Gala <galak@kernel.crashing.org>
11325 Date: Thu Nov 29 02:10:09 2007 -0600
11327 Stop using immap_t on 85xx
11329 In the future the offsets to various blocks may not be in same location.
11330 Move to using CFG_MPC85xx_*_ADDR as the base of the registers
11331 instead of getting it via &immap.
11333 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11335 commit 2714223f8e04ab3e4133ff65872eef366d90bfea
11336 Author: Kumar Gala <galak@kernel.crashing.org>
11337 Date: Thu Nov 29 01:23:09 2007 -0600
11339 Remove CONFIG_OF_FLAT_TREE related code from mpc85xx since we now use libfdt
11341 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11343 commit c480861bf000156e6a3e932c258db59ff2212dd3
11344 Author: Kumar Gala <galak@kernel.crashing.org>
11345 Date: Thu Nov 29 01:06:19 2007 -0600
11347 Update MPC8568 MDS to use libfdt
11349 Updated the MPC8568 MDS config to use libfdt and assume use of aliases for
11350 ethernet, pci, and serial for the various fixups that are done.
11352 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11354 commit 1563f56e0c68f6920f956382d6d13bee3f01c0f7
11355 Author: Haiying Wang <Haiying.Wang@freescale.com>
11356 Date: Wed Nov 14 15:52:06 2007 -0500
11358 Add PCI Express support on MPC8568MDS
11360 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
11361 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11363 commit b90d25497625b90ffa3f2911a0895ca237556ff5
11364 Author: Kumar Gala <galak@kernel.crashing.org>
11365 Date: Thu Nov 29 00:11:44 2007 -0600
11367 Update MPC85xx CDS to use libfdt
11369 Updated the MPC85xx CDS config to use libfdt and assume use of aliases for
11370 ethernet, pci, and serial for the various fixups that are done.
11372 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11374 commit 0fd5ec66b10521a057ad73e69ab5f0f9eafba255
11375 Author: Kumar Gala <galak@kernel.crashing.org>
11376 Date: Wed Nov 28 22:54:27 2007 -0600
11378 Update MPC8540 ADS to use libfdt
11380 Updated the MPC8540 ADS config to use libfdt and assume use of aliases for
11381 ethernet, pci, and serial for the various fixups that are done.
11383 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11385 commit 5ce715802f6c50dc78b3405b92f184b1e3710519
11386 Author: Kumar Gala <galak@kernel.crashing.org>
11387 Date: Wed Nov 28 22:40:31 2007 -0600
11389 Update MPC8560 ADS to use libfdt
11391 Updated the MPC8560 ADS config to use libfdt and assume use of aliases for
11392 ethernet, pci, and serial for the various fixups that are done.
11394 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11396 commit aafeefbdb8b029f5ca2a195598d0a501a606eea9
11397 Author: Kumar Gala <galak@kernel.crashing.org>
11398 Date: Wed Nov 28 00:36:33 2007 -0600
11400 Stop using immap_t for cpm offset on 85xx
11402 In the future the offsets to various blocks may not be in same location.
11403 Move to using CFG_MPC85xx_CPM_ADDR as the base of the CPM registers
11404 instead of getting it via &immap->im_cpm.
11406 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11408 commit f59b55a5b8fcadaa99781ba48e7a38e956afa527
11409 Author: Kumar Gala <galak@kernel.crashing.org>
11410 Date: Tue Nov 27 23:25:02 2007 -0600
11412 Stop using immap_t for guts offset on 85xx
11414 In the future the offsets to various blocks may not be in same location.
11415 Move to using CFG_MPC85xx_GUTS_ADDR as the base of the guts registers
11416 instead of getting it via &immap->im_gur.
11418 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11420 commit 50c03c8cf494d91cdec39670d95337c743e16ec9
11421 Author: Kumar Gala <galak@kernel.crashing.org>
11422 Date: Tue Nov 27 22:42:34 2007 -0600
11424 Update MPC8544 DS config
11426 * Removed HAS_ETH2/HAS_ETH3 - MPC8544 only has TSEC1/2
11427 * Removed some misc environment setup
11428 * Moved to using fdtfile & fdtaddr as fdt env var names
11429 * Enabled CONFIG_CMDLINE_EDITING
11431 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11433 commit addce57e2e4c49e77ffb2020a84690713bb18b47
11434 Author: Kumar Gala <galak@kernel.crashing.org>
11435 Date: Mon Nov 26 17:12:24 2007 -0600
11437 Update MPC8544DS to use libfdt
11439 Updated the MPC8544DS config to use libfdt and assume use of aliases for
11440 ethernet, pci, and serial for the various fixups that are done.
11442 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11444 commit f852ce72f100cabd1f11c21c085a0ad8eca9fb65
11445 Author: Kumar Gala <galak@kernel.crashing.org>
11446 Date: Thu Nov 29 00:15:30 2007 -0600
11448 Add libfdt based ft_cpu_setup for mpc85xx
11450 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11452 commit 3b9abdc448a1c2c6a4c2aa292724b4d1a05166a9
11453 Author: Stefan Roese <sr@denx.de>
11454 Date: Tue Dec 11 13:38:19 2007 +0100
11456 ppc4xx: Correct GPIO offset in gpio_config()
11458 Thanks to Gary Jennejohn for pointing this out.
11460 Signed-off-by: Stefan Roese <sr@denx.de>
11462 commit 8809a2713b1ceaf3da55d9d785470294f15de06a
11463 Author: Stefan Roese <sr@denx.de>
11464 Date: Tue Dec 11 11:46:01 2007 +0100
11466 rtc: Fix merging problem
11468 Signed-off-by: Stefan Roese <sr@denx.de>
11470 commit 7cfc12a7dcfdb350e2ab76db4dafcc30f7e77c2b
11471 Author: Stefan Roese <sr@denx.de>
11472 Date: Sat Dec 8 14:47:34 2007 +0100
11474 ppc4xx: 405EX: Correctly enable USB pins
11476 This patch selects the USB data pins in the 405EX GPIO and MFC (multi
11477 function control) registers. This is done for the AMCC Kilauea and
11478 Makalu eval boards.
11480 Signed-off-by: Stefan Roese <sr@denx.de>
11482 commit 9692c2734a47f23b44a0f68042a3e2ca8d1bfb39
11483 Author: Stefan Roese <sr@denx.de>
11484 Date: Sat Dec 8 08:25:09 2007 +0100
11486 CFI: Coding style cleanup
11488 Signed-off-by: Stefan Roese <sr@denx.de>
11490 commit 81b20ccc2d795ae9a1199db5a50ad9c28d1e4d22
11491 Author: Michael Schwingen <michael@schwingen.org>
11492 Date: Fri Dec 7 23:35:02 2007 +0100
11494 CFI: support JEDEC flash roms in CFI-flash framework
11496 The following patch adds support for non-CFI flash ROMS, by hooking into the
11497 CFI flash code and using most of its code, as recently discussed here in the
11498 thread "Mixing CFI and non-CFI flashs".
11500 Signed-off-by: Michael Schwingen <michael@schwingen.org>
11501 Signed-off-by: Stefan Roese <sr@denx.de>
11503 commit c01b17dd856fa120b2970f50d9598546a4927ec3
11504 Author: Gerald Van Baren <vanbaren@cideas.com>
11505 Date: Wed Nov 28 21:24:50 2007 -0500
11507 Conditionally compile fdt_fixup_ethernet()
11509 Fix compiler warnings: On boards that don't have ethernets defined,
11510 don't compile fdt_fixup_ethernet().
11512 commit 246d4ae6bc282bc1841224e1c5fc49dc925e0bf7
11513 Author: Kumar Gala <galak@kernel.crashing.org>
11514 Date: Tue Nov 27 21:59:46 2007 -0600
11516 Convert boards that set memory node to use fdt_fixup_memory()
11518 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11520 commit 151c8b09b35eebe8fd9139cb6c1d91c27b22f058
11521 Author: Kumar Gala <galak@kernel.crashing.org>
11522 Date: Mon Nov 26 17:06:15 2007 -0600
11524 Added fdt_fixup_stdout that uses aliases to set linux,stdout-path
11526 We use a combination of the serialN alias and CONFIG_CONS_INDEX to
11527 determine which serial alias we should set linux,stdout-path to.
11529 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11531 commit 3c9272813fad84c691d0e4989bb18a3ffebdebfc
11532 Author: Kumar Gala <galak@kernel.crashing.org>
11533 Date: Mon Nov 26 14:57:45 2007 -0600
11535 Add common memory fixup function
11537 Add the function fdt_fixup_memory() to fixup the /memory node of the fdt
11539 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11541 commit 9c9109e7fcf7ac2ca19c95b8ac54b8d1c773b157
11542 Author: Kumar Gala <galak@kernel.crashing.org>
11543 Date: Mon Nov 26 11:19:12 2007 -0600
11545 Conditionally compile fdt_support.c
11547 Modify common/Makefile to conditionally compile fdt_support.c based
11548 on CONFIG_OF_LIBFDT.
11550 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11552 commit d88e7ba0980773479e1a64badb293116071b7ef0
11553 Author: Kumar Gala <galak@kernel.crashing.org>
11554 Date: Mon Nov 26 10:41:40 2007 -0600
11556 Fix build breakage due to libfdt import
11558 The IDS8247 got lost in the update and need an API update
11559 do to rename of functions in libfdt.
11561 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11563 commit 28f384b171bbf1fb2dafb1046e6d259a6b2f8714
11564 Author: Gerald Van Baren <vanbaren@cideas.com>
11565 Date: Fri Nov 23 19:43:20 2007 -0500
11567 Add spaces around the = in the fdt print format.
11569 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
11571 commit 29592ecba3b932b9b152bcec6c0c0806412db4a3
11572 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
11573 Date: Fri Dec 7 01:25:38 2007 +0900
11575 sh: Moved driver of the SuperH dependence
11577 The composition of the directory in the drivers/ changed.
11578 I moved SuperH serial driver and marubun PCMCIA driver.
11580 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
11582 commit 41be969f4957115ed7b1fe8b890bfaee99d7a7a2
11583 Author: Wolfgang Denk <wd@denx.de>
11584 Date: Thu Dec 6 10:21:19 2007 +0100
11588 Signed-off-by: Wolfgang Denk <wd@denx.de>
11590 commit cf5933ba1e97a1cd8f5f24070e820f21d976eaeb
11591 Author: Wolfgang Denk <wd@denx.de>
11592 Date: Thu Dec 6 10:21:03 2007 +0100
11594 ADS5121 Board: fix compile problem.
11596 Signed-off-by: Wolfgang Denk <wd@denx.de>
11598 commit a27044b14a9e93678a82d7b35f202b93e7687abc
11599 Author: Stefan Roese <sr@denx.de>
11600 Date: Thu Dec 6 05:58:43 2007 +0100
11602 ppc4xx: Enable hardware-fix for PCI/DMA errata on AMCC 440SP/SPe boards
11604 This patch enables the hardware-fix for the PCI/DMA errata's 19+22 by
11605 setting the FIXD bit in the SDR0_MFR register. Here a description of the
11608 Problem Description
11609 ------------------------------
11610 If a DMA is performed between memory and PCI with the DMA 1 Controller
11611 using prefetch, and as a result uses a special purpose buffer selected by
11612 the PCIXn Bridge Options 1 Register (PCIXn_BRDGOPT1[RBP7] - bits 31-29),
11613 the first part of the transfer sequence is performed twice. The
11614 PPC440SPe PCI Controller requests more data than was needed such that in
11615 the case of enforce memory protection, a host CPU exception can occur.
11616 No data is corrupted, because data transfer is stopped in the PCI
11617 Controller. Prefetch enable is specified by setting DMA Configuration
11618 Register (I2O0_DMAx_CFG[DXEPD] - bit 31) to 0.
11620 Behavior that may be observed in a running system
11621 ---------------------------------------------------------------------------
11623 1. DMA performance is decreased because of the double access on the PCI bus
11625 2. If an illegal access to some address on the PCI bus is detected at the
11626 system level, a machine check or similar system error may occur.
11628 Workarounds Available
11629 ----------------------------------
11631 1. Do not program prefetch. Note that a prefetch command cannot be programmed
11632 without selecting a special purpose buffer.
11633 2. To avoid crossing a physical boundary of the PCI slave device, add 512
11634 bytes of address to the PCI address range.
11636 This patch was originally provided by Pravin M. Bathija <pbathija@amcc.com>
11637 from AMCC and slighly changed.
11639 Signed-off-by: Pravin M. Bathija <pbathija@amcc.com>
11640 Signed-off-by: Stefan Roese <sr@denx.de>
11642 commit a90921f71d225bf9e0f0fc7b8beadeb8001bf78a
11643 Author: Stefan Roese <sr@denx.de>
11644 Date: Tue Dec 4 16:29:48 2007 +0100
11646 ppc4xx: Yosemite/Yellowstone: Add DTT AD7414 support
11648 Signed-off-by: Stefan Roese <sr@denx.de>
11650 commit 8d4f040a3c15036a6ea25a9c39e7d89fefa8440d
11651 Author: Wolfgang Denk <wd@denx.de>
11652 Date: Mon Dec 3 00:15:28 2007 +0100
11654 Prepare for 1.3.1-rc1
11656 Signed-off-by: Wolfgang Denk <wd@denx.de>
11658 commit e15e33433e7c05111968dc9b434a52fd42cbd221
11659 Author: Stefan Roese <sr@denx.de>
11660 Date: Fri Nov 30 07:15:41 2007 +0100
11662 ppc4xx: Kilauea: Add PCIe reset assertion upon power-up
11664 This manual PCIe reset triggering solves the problem seen with the
11665 Intel EPRO/1000 card, which was not detected (link not established)
11666 upon power-up reset.
11668 Signed-off-by: Stefan Roese <sr@denx.de>
11670 commit 260eea5676ca46903a335686cc020b29c4ca46fe
11671 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
11672 Date: Thu Nov 29 01:21:54 2007 +0900
11674 sh: Add SuperH boards maintainer to MAINTAINERS file
11676 Add MS7750SE and MS7722SE's board maintainer to MAINTAINERS file.
11678 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
11680 commit aa9c4f1d22701a92347c1c81f34d12c8ad3a3747
11681 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
11682 Date: Thu Nov 29 00:13:04 2007 +0900
11684 sh: Add ms7750se support in MAKEALL
11686 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
11688 commit c7144373427a178332bf9754131c8c34c52c200a
11689 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11690 Date: Tue Nov 27 09:44:53 2007 +0100
11692 sh: Add sh3 and sh4 support in MAKEALL
11694 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11695 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
11697 commit 130080874a3d28450098481a262c5f7c855e908d
11698 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
11699 Date: Sun Nov 25 02:51:17 2007 +0900
11701 sh: Add document for SuperH.
11703 This document is a summary of information concerning SuperH of U-Boot.
11705 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
11707 commit 33ecdc2f9d64926e1a6067b28f3a0aefc3b6d23d
11708 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
11709 Date: Sun Nov 25 02:39:31 2007 +0900
11711 sh: Add marubun's pcmcia driver
11713 Marubun pcmcia is a chip for PCMCIA used with SuperH.
11714 Of course, this can be used even by other architectures.
11715 When use this driver, came to be able to use CompactFlash
11718 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
11720 commit febd86b969b975289ed948f1ac0eb9722da41ced
11721 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
11722 Date: Sun Nov 25 02:32:13 2007 +0900
11724 sh: Update SuperH SCIF driver
11726 - Changed volatile unsigned to vu_.
11727 - Changed Makefile for kconfig.
11729 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
11731 commit 8be760903645af09871be50ad0a6f9ebb62b311d
11732 Author: Stefan Roese <sr@denx.de>
11733 Date: Tue Nov 27 11:57:35 2007 +0100
11735 ppc4xx: Kilauea & Makalu: Fix ext IRQ pin multiplexing
11737 After an error in the AMCC 405EX users manual now correctly configure
11738 IRQ2 (Kilauea)/IRQ0 (Makalu) as alternate 2 signal for external IRQ
11741 Signed-off-by: Stefan Roese <sr@denx.de>
11743 commit a5f601fd1b1278deae5aa9fc27a232b0d1c1c788
11744 Author: Wolfgang Denk <wd@denx.de>
11745 Date: Mon Nov 26 19:18:21 2007 +0100
11747 Cleanup coding style; update CHANGELOG
11749 Signed-off-by: Wolfgang Denk <wd@denx.de>
11751 commit 3deca9d44767efd1b83f4b701f0dbf21a7595f7b
11752 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11753 Date: Sun Nov 25 22:39:25 2007 +0100
11755 MAKEALL: add missing 512x boards in ppc
11757 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11759 commit a340c325e668ca7386c2276387681720be9c3757
11760 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11761 Date: Sun Nov 25 18:45:47 2007 +0100
11763 Makefile : fix tags ctags etags with new drivers organization
11765 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11767 commit 63362cfc6baa97ae0e37ba2c6ece530fcac9f79e
11768 Author: Stefan Roese <sr@denx.de>
11769 Date: Mon Nov 26 15:06:14 2007 +0100
11771 ppc4xx: Makalu: Change EBC setup for CS0 to enable 400MHz usage
11773 As suggested by Senao, use a different EBC_PB0AP setup for 400MHz
11776 Signed-off-by: Stefan Roese <sr@denx.de>
11778 commit ca1ce226287270bb01e25b8e3674c701f12edf19
11779 Author: Stefan Roese <sr@denx.de>
11780 Date: Mon Nov 26 15:01:45 2007 +0100
11782 ppc4xx: Kilauea: Configure pin mux to use ext IRQ2 as interrupt
11784 Signed-off-by: Stefan Roese <sr@denx.de>
11786 commit 87ddedd6ad804427ce125ceaa076d7a4f74e9d5d
11787 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11788 Date: Sun Nov 25 18:45:47 2007 +0100
11790 Makefile : fix tags ctags etags with new drivers organization
11792 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11794 commit 59829cc189378c142c13d2aa8d9a897d8bef3961
11795 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11796 Date: Sat Nov 24 21:26:56 2007 +0100
11798 drivers/mtd : move mtd drivers to drivers/mtd
11800 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11802 commit 318c0b90431f2648552e5ade78833f42652ce859
11803 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11804 Date: Sat Nov 24 21:17:55 2007 +0100
11806 drivers/misc : move misc drivers to drivers/misc
11808 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11810 commit 33daf5b7858807cb4ce4158c2c56524671c14c08
11811 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11812 Date: Sat Nov 24 21:13:59 2007 +0100
11814 drivers/block : move block drivers to drivers/block
11816 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11818 commit 0c698dcaa70275eb8814f665b545547cee013892
11819 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11820 Date: Sat Nov 24 20:59:50 2007 +0100
11822 drivers/rtc : move rtc drivers to drivers/rtc
11824 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11826 commit f868cc5a50757d94f36c312395481cb0f187d9e6
11827 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11828 Date: Sat Nov 24 20:14:44 2007 +0100
11830 drivers/hwmon : move hardware monitor drviers to drivers/hwmon
11832 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11834 commit 16b195c82a18cbfd164800f17a1ef9db2e48331a
11835 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11836 Date: Sat Nov 24 19:46:45 2007 +0100
11838 drivers/input : move input drivers to drivers/input
11840 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11842 commit e4558666293364fc3af1c1d9381ca933fa0f1275
11843 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11844 Date: Sat Nov 24 19:40:11 2007 +0100
11846 drivers/usb : move usb drivers to drivers/usb
11848 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11850 commit 1378df792a7ff3abd1bf54a63f5475784f5b083c
11851 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11852 Date: Sat Nov 24 19:33:38 2007 +0100
11854 drivers/serial : move serial drivers to drivers/serial
11856 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11858 commit 2439e4bfa111babf4bc07ba20efbf3e36036813e
11859 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11860 Date: Wed Nov 21 21:19:24 2007 +0100
11862 drivers/net : move net drivers to drivers/net
11864 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11866 commit 352d259130b349fe9593b8dada641bd78a9659e5
11867 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11868 Date: Tue Nov 20 20:41:48 2007 +0100
11870 drivers/video : move video drivers to drivers/video
11872 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11874 commit 73646217186aa17afc8e305c5f06f06dd335eaad
11875 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11876 Date: Tue Nov 20 20:33:09 2007 +0100
11878 drivers/pcmcia : move pcmcia drivers to drivers/pcmcia
11880 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11882 commit 93a686ee9c5ddc6fa368c32cfbfde6f6724599fc
11883 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11884 Date: Tue Nov 20 20:28:09 2007 +0100
11886 drivers/pci : move pci drivers to drivers/pci
11888 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11890 commit 9162352817579840d7802da6d85872b3ca003c97
11891 Author: Gerald Van Baren <vanbaren@cideas.com>
11892 Date: Thu Nov 22 17:23:23 2007 -0500
11894 Fix fdt printing for updated libfdt
11896 Also improve printing (adopt dtc v1 "c style" hex format), whitespace cleanup.
11898 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
11900 commit 9eb77cea1fa12d5969eb26a1d1d81da381bd6b1c
11901 Author: Kumar Gala <galak@kernel.crashing.org>
11902 Date: Wed Nov 21 13:30:15 2007 -0600
11904 Add additional fdt fixup helper functions
11906 Added the following fdt fixup helpers:
11907 * do_fixup_by_prop{_u32} - Find matching nodes by property name/value
11908 * do_fixup_by_compat{_u32} - Find matching nodes by compat
11910 The _u32 variants work the same only the property they are setting
11911 is know to be a 32-bit integer instead of a byte buffer.
11913 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11915 commit ab544633abdd14f4dd5d92e500b73eb59ef57e67
11916 Author: Kumar Gala <galak@kernel.crashing.org>
11917 Date: Wed Nov 21 11:11:03 2007 -0600
11919 Add fdt_fixup_ethernet helper to set mac addresses
11921 Added a fixup helper that uses aliases to set mac addresses
11922 in the device tree based on the bd_t
11924 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11926 commit dbaf07ce620aab249e3502b20a986234a6af1d3a
11927 Author: Kumar Gala <galak@kernel.crashing.org>
11928 Date: Wed Nov 21 14:07:46 2007 -0600
11930 Fix warnings from import of libfdt
11932 cmd_fdt.c: In function fdt_print:
11933 cmd_fdt.c:586: warning: assignment discards qualifiers from pointer target type
11934 cmd_fdt.c:613: warning: assignment discards qualifiers from pointer target type
11935 cmd_fdt.c:635: warning: assignment discards qualifiers from pointer target type
11936 cmd_fdt.c:636: warning: assignment discards qualifiers from pointer target type
11938 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11940 commit 8d04f02f6224e6983f4812ea4da704950ec8539c
11941 Author: Kumar Gala <galak@kernel.crashing.org>
11942 Date: Wed Oct 24 11:04:22 2007 -0500
11944 Update libfdt from device tree compiler (dtc)
11946 Update libfdt to commit 8eaf5e358366017aa2e846c5038d1aa19958314e from
11947 the device tree compiler (dtc) project.
11949 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11951 commit e93becf80d732b64aef81b23e8b6ece02c40533d
11952 Author: Kumar Gala <galak@kernel.crashing.org>
11953 Date: Sat Nov 3 19:46:28 2007 -0500
11955 Move do_fixup* for libfdt into common code
11957 Moved the generic fixup handling code out of cpu/mpc5xxx and cpu/mpc8260
11958 into common/fdt_support.c and renamed:
11960 do_fixup() -> do_fixup_by_path()
11961 do_fixup_u32() -> do_fixup_by_path_u32()
11963 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11965 commit f738b4a75998f42a7408defadc9baac7a31c92db
11966 Author: Kumar Gala <galak@kernel.crashing.org>
11967 Date: Thu Oct 25 16:15:07 2007 -0500
11969 Make no options to fdt print default to '/'
11971 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11973 commit a3c2933e02503fe36ade2c1b65af46f2b7a168e7
11974 Author: Kumar Gala <galak@kernel.crashing.org>
11975 Date: Wed Oct 24 10:21:57 2007 -0500
11977 Removed some nonused fdt functions and moved fdt_find_and_setprop out of libfdt
11980 fdt_node_is_compatible
11981 fdt_find_node_by_type
11982 fdt_find_compatible_node
11984 To ease merge of newer libfdt as we aren't using them anywhere at this time.
11986 Also moved fdt_find_and_setprop out of libfdt into fdt_support.c for the same
11989 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11991 commit 98e2867cc85409b919f862e6c16026461ec955df
11992 Author: Grant Likely <grant.likely@secretlab.ca>
11993 Date: Wed Nov 21 09:19:37 2007 -0700
11995 [BUILD] Remove libraries when updating autoconf.mk
11997 Fix library problems caused by conditional compilation. Using
11998 autoconf.mk to decide which files to compile has caused a problem when
11999 changing configuration from one board to another without clearing out
12000 the library (*.a) files.
12002 It used to be that the linker was always passed the same list of .o
12003 files when building the .a files. However, that is not longer true
12004 with conditional compilation. Now, a different board config will have
12005 a different file list passed to the linker. The problem occurs when
12006 a library has already been built and the board config is changed.
12008 Since the linker will update instead of replace a preexisting library,
12009 then if the file list changes to remove some object files the old
12010 objects will still exist in the library.
12012 The solution is to remove all old library files when autoconf.mk is
12015 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
12017 commit ed1353d74b9ce8a7fcd660570b848a184d614b5f
12018 Author: Kumar Gala <galak@kernel.crashing.org>
12019 Date: Wed Nov 21 08:49:50 2007 -0600
12021 [BUILD] conditionally compile libfdt/*.c in libfdt/Makefile
12023 Modify libfdt/Makefile to conditionally compile the *.c files based
12024 on the board config.
12026 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12028 commit 4a43719a7738712811d822ca8125427b27a55cdc
12029 Author: Grant Likely <grant.likely@secretlab.ca>
12030 Date: Mon Sep 24 09:05:31 2007 -0600
12032 [BUILD] conditionally compile common/cmd_*.c in common/Makefile
12034 Modify common/Makefile to conditionally compile the cmd_*.c files based
12035 on the board config.
12037 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
12039 commit 2f155f6c0a1f5e9a306a3f1f4fbe067db7ced3b1
12040 Author: Grant Likely <grant.likely@secretlab.ca>
12041 Date: Mon Sep 24 09:05:31 2007 -0600
12043 [BUILD] Generate include/autoconf.mk from board config files
12045 Use cpp and sed to postprocess config.h and import the defined values
12046 into include/autoconf.mk. autoconf.mk is then included by config.mk to
12047 give 'make' access to the board configuration.
12049 Doing this enables conditional compilation at the Makefile level instead
12050 of by wrapping every .c file with #ifdef/#endif wrappers.
12052 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
12054 commit 68b88999da87ab88e71e1306192905be3450198e
12055 Author: Jon Loeliger <jdl@freescale.com>
12056 Date: Tue Nov 20 15:02:26 2007 -0600
12058 8610HPCD: Enable the 8610 Display Interface Unit
12060 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12062 commit 74f89faa9d1e77ed947e628d3effaa513fe05d05
12063 Author: Jon Loeliger <jdl@freescale.com>
12064 Date: Tue Nov 20 15:00:53 2007 -0600
12066 Move 8610 DIU interface structure definitions to header file.
12068 These two structures are still needed during the
12069 initialization and setup of the DIU hardware.
12070 So move them to the fsl_diu_fb.h file for now.
12073 Noticed-by: York Sun <yorksun@freescale.com>
12074 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12076 commit 080c646dbf474a109c3f85718fb01ce042a38c45
12077 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12078 Date: Tue Nov 20 20:14:18 2007 +0100
12080 drivers/i2c : move i2c drivers to drivers/i2c
12082 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12084 commit 9a337ddc154a10a26f117fd147b009abcdeba75a
12085 Author: Wolfgang Denk <wd@denx.de>
12086 Date: Mon Nov 19 22:20:24 2007 +0100
12088 Prepare for 1.3.0 release.
12090 Signed-off-by: Wolfgang Denk <wd@denx.de>
12092 commit f30ad49b16bf998b03c1a5228b6c86369d61c258
12093 Author: Haiying Wang <Haiying.Wang@freescale.com>
12094 Date: Mon Nov 19 10:02:13 2007 -0500
12096 Move CONFIG_QE out of CONFIG_PCI wrap for MPC8568MDS
12098 CONFIG_QE shouldn't be in the wrap of CONFIG_PCI, fix it.
12100 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
12102 commit f8c320609366176b31104d9bf5e295232e1c7f1d
12103 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
12104 Date: Mon Nov 19 11:14:16 2007 +0900
12106 [MIPS] board/gth2/lowlevel_init.S: Fix a build warning
12108 lowlevel_init.S: Assembler messages:
12109 lowlevel_init.S:413: Warning: Pretending global symbol used as branch target is local.
12111 Looking at codes, the `memtest' and `clearmem' are intentional mixed
12112 use of `global symbols' and `label' for debugging purpose. To make it
12113 build, just disable global-symbols-use for now. As a result `memtest'
12114 still remains as unused, but leave it be...
12116 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
12118 commit e8da58f2bc092891e8cc92b927ed5c4bd0cb0cab
12119 Author: Wolfgang Denk <wd@denx.de>
12120 Date: Mon Nov 19 12:59:14 2007 +0100
12122 Fix build problems with mp2usb board
12124 Signed-off-by: Wolfgang Denk <wd@denx.de>
12126 commit 6bf4c686afca1e86e1c384d59218f914605713bf
12127 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12128 Date: Sun Nov 18 18:36:11 2007 +0100
12130 s3c24x0: Fix usb_ohci.c missing in Makefile
12131 and usb_ohci.c warning differ in signedness
12133 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12135 commit 6073f61e078da5ddb521b56256bcc36508589883
12136 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12137 Date: Sun Nov 18 12:55:02 2007 +0100
12139 pb1x00 board: Fix u16 status declaration when PCMCIA is defined
12141 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12143 commit 8412d814ce8bf5570a2b747f1e7fd321097fe987
12144 Author: Wolfgang Denk <wd@denx.de>
12145 Date: Sun Nov 18 17:11:09 2007 +0100
12147 Fix compiler warnings for ARM systems.
12149 Signed-off-by: Wolfgang Denk <wd@denx.de>
12151 commit 409ecdc0bb47dd28b0af6c25ffd658d22cc36b37
12152 Author: Wolfgang Denk <wd@denx.de>
12153 Date: Sun Nov 18 16:36:27 2007 +0100
12155 Fix compiler warnings for PPC systems. Update CHANGELOG.
12157 Signed-off-by: Wolfgang Denk <wd@denx.de>
12159 commit 653811a3c2b35856bf12e196dcc8c4694e28e420
12160 Author: Stefan Roese <sr@denx.de>
12161 Date: Sun Nov 18 14:44:44 2007 +0100
12163 ppc4xx: Correct 405EX PCIe UTL register mapping
12165 Map 4k mem space for UTL registers for each port.
12167 Signed-off-by: Stefan Roese <sr@denx.de>
12169 commit 079c2c4fa71c0d1ebef394508df9088df8a308d3
12170 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12171 Date: Sat Nov 17 11:31:10 2007 +0100
12173 Fix warning differ in signedness in net/net.c and net/nfs.c
12175 commit 7e14fc65368cbd2861b1207453da55a4fc7b3f81
12176 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
12177 Date: Sat Nov 17 20:42:45 2007 +0900
12179 gth2.c: Fix a warning on gth2 build.
12181 gth2.c: In function 'misc_init_r':
12182 gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
12184 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
12186 commit 2309c130aa4c84b91bd874a41269c923eb61b555
12187 Author: Stefan Roese <sr@denx.de>
12188 Date: Sat Nov 17 07:58:25 2007 +0100
12190 Fix warning differ in signedness in common/cmd_scsi.c
12192 Signed-off-by: Stefan Roese <sr@denx.de>
12194 commit 9ea61b57968554eaf0f474ec7e088b17d367f474
12195 Author: Stefan Roese <sr@denx.de>
12196 Date: Sat Nov 17 14:52:29 2007 +0100
12198 ppc4xx: Update AMCC Kilauea config file
12200 - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
12202 Signed-off-by: Stefan Roese <sr@denx.de>
12204 commit 7e1d884b7cb602007329c517ec1c453e3a6a5d9c
12205 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
12206 Date: Sat Nov 17 20:05:26 2007 +0900
12208 [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker
12210 Current trick to pick up GNU assembler minor version does not work with the
12211 latest binutils (2007-03-01 or later) due to ${PKGVERSION} now default to
12214 $ sde-as --version |grep "GNU assembler"
12215 GNU assembler 2.15.94 mipssde-6.02.02-20050602
12216 $ sde-as --version |grep "GNU assembler" |awk '{print $3}'
12218 $ sde-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
12222 $ mips-linux-as --version |grep "GNU assembler"
12223 GNU assembler (GNU Binutils) 2.18
12224 $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}'
12226 $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
12230 As a result of above, you'll see many noises with such binutils:
12233 /bin/sh: line 0: [: : integer expression expected
12234 /bin/sh: line 0: [: : integer expression expected
12235 make[1]: Entering directory `/home/skuribay/devel/u-boot.git/cpu/mips'
12236 mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o incaip_wdt.o incaip_wdt.S
12237 /bin/sh: line 0: [: : integer expression expected
12238 mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o cache.o cache.S
12239 /bin/sh: line 0: [: : integer expression expected
12240 mips-linux-gcc -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -Wall -Wstrict-prototypes -c -o asc_serial.o asc_serial.c
12241 /bin/sh: line 0: [: : integer expression expected
12243 This patch simplifies the trick and makes it work with both versions of gas.
12244 I also replace an expensive `awk (or gawk)' with `cut'.
12246 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
12248 commit 16664f72850846e645616da1c0fa5afcd6d15f15
12249 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
12250 Date: Sat Nov 17 20:05:26 2007 +0900
12252 [MIPS] Remove useless instructions for initializing $gp.
12254 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
12256 commit 03c031d5660ea946c39af6e2e16267da857c609f
12257 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
12258 Date: Sat Oct 27 15:27:06 2007 +0900
12260 [MIPS] MIPS 4K core: Coding style cleanups
12262 No logical changes.
12264 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
12266 commit f5e429d3860bba4c6ae8bead8f78349fa24491b2
12267 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
12268 Date: Sat Nov 17 20:05:20 2007 +0900
12270 [MIPS] gth2.c: Fix a warning on gth2 build.
12272 gth2.c: In function 'misc_init_r':
12273 gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
12275 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
12277 commit 4fbd0741b2b6441da10be93e10267122581b7079
12278 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
12279 Date: Sat Oct 27 15:22:33 2007 +0900
12281 [MIPS] au1x00_eth.c: Fixed a warning on pb1000 build.
12283 au1x00_eth.c: In function 'au1x00_miiphy_write':
12284 au1x00_eth.c:139: warning: 'return' with no value, in function returning non-void
12286 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
12288 commit f01320459736f156707425cf8112f98606301aa4
12289 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
12290 Date: Sat Oct 27 15:00:25 2007 +0900
12292 [MIPS] au1x00_eth.c: Fix au1x00_miiphy_{read,write} build error
12294 au1x00_eth.c: In function 'au1x00_enet_initialize':
12295 au1x00_eth.c:246: error: 'au1x00_miiphy_read' undeclared (first use in this function)
12296 au1x00_eth.c:246: error: (Each undeclared identifier is reported only once
12297 au1x00_eth.c:246: error: for each function it appears in.)
12298 au1x00_eth.c:246: error: 'au1x00_miiphy_write' undeclared (first use in this function)
12299 au1x00_eth.c: In function 'au1x00_miiphy_write':
12300 au1x00_eth.c:298: warning: 'return' with no value, in function returning non-void
12301 make[1]: *** [au1x00_eth.o] Error 1
12303 Fixed by moving these two functions forward.
12305 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
12307 commit b09258c5393edd1087c5f39ae68338f16b49f8b3
12308 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
12309 Date: Sat Oct 27 15:00:25 2007 +0900
12311 MAKEALL: Added missing pb1000 board
12313 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
12315 commit 2e4a6e3667a1e39c0e6e99498686b15d2718b369
12316 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
12317 Date: Sat Oct 27 15:00:24 2007 +0900
12319 [MIPS] pb1000: Replace obsolete memsetup.S with lowlevel_init.S
12321 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
12323 commit 662e5cb397249c3ea88a4c3255e9ccfc40b98d82
12324 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
12325 Date: Sat Oct 27 15:00:24 2007 +0900
12327 [MIPS] u-boot.lds: Cleanup __u_boot_cmd_{start,end}
12329 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
12331 commit 5947f6999aafa7c54c1390983d264a8463dfea8e
12332 Author: Wolfgang Denk <wd@denx.de>
12333 Date: Sat Nov 17 02:34:38 2007 +0100
12335 Update CHANGELOIG, prepare for -rc4
12337 Signed-off-by: Wolfgang Denk <wd@denx.de>
12339 commit fd329e6f05bbdfe6bd71b0e09f0c76d3b0a025a5
12340 Author: Luotao Fu <l.fu@pengutronix.de>
12341 Date: Wed Nov 14 18:58:33 2007 +0100
12343 Fix the i2c frequency and default address in rsdproto board
12345 rsdproto board support has wrong I2C frequency and wrong return value
12348 Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
12350 commit 429c180edad038f91c989cb14b478228092e7054
12351 Author: Wolfgang Denk <wd@denx.de>
12352 Date: Sat Nov 17 01:45:38 2007 +0100
12354 powerpc: Backout relocation changes for MPC5121, too.
12356 Apply Grant Likely's backout to MPC5121 code, too.
12358 Pointed out by Rafal Jaworowski <raj@semihalf.com>
12360 Signed-off-by: Wolfgang Denk <wd@denx.de>
12362 commit 1c3dd43338a077165e7e0309cb3994e65d2bdbf8
12363 Author: Grant Likely <grant.likely@secretlab.ca>
12364 Date: Tue Nov 13 22:18:33 2007 -0700
12366 powerpc: Backout relocation changes.
12368 Ugh. I *hate* to back this change out, but these compiler flags don't
12369 work for relocation on all versions of GCC. I've not been able to
12370 reproduce the environment in my setup (and hence, not been able to
12371 find a combination that *does* work), so I've got no choice but to go
12372 back to the old gcc flags and linker script.
12374 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
12376 commit 5c15010efad980ad5498cc565fc1ed70df2f52b4
12377 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12378 Date: Tue Nov 13 09:11:05 2007 +0100
12380 Fixed mips_io_port_base build errors.
12382 This patch has been sent on:
12385 Although mips_io_port_base is currently a part of IDE command, it is quite
12386 fundamental for MIPS I/O port access such as in[bwl] and out[bwl]. So move
12387 it to MIPS general part, and introduce `set_io_port_base()' from Linux.
12389 This patch is triggered by multiple definition of `mips_io_port_base' build
12390 error on gth2 (and tb0229 also needs this fix.)
12392 board/gth2/libgth2.a(gth2.o): In function `log_serial_char':
12393 /home/skuribay/devel/u-boot.git/board/gth2/gth2.c:47: multiple definition of `mips_io_port_base'
12394 common/libcommon.a(cmd_ide.o):/home/skuribay/devel/u-boot.git/common/cmd_ide.c:712: first defined here
12395 make: *** [u-boot] Error 1
12397 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
12398 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12400 commit 6ecbb7a3fa9b0940ed33e490d195d4b6830b2422
12401 Author: Wolfgang Denk <wd@denx.de>
12402 Date: Sat Nov 17 01:30:40 2007 +0100
12404 Fix a bug in the slave serial programming mode for the Xilinx
12405 Spartan2/3 FPGAs. The old code used "< 0" on a "char" type to test if
12406 the most significant bit was set, which did not work on any
12407 architecture where "char" defaulted to be an unsigned type.
12409 Based on a patch by Angelos Manousaridis <amanous@inaccessnetworks.com>
12411 Signed-off-by: Wolfgang Denk <wd@denx.de>
12413 commit d08b7233bc252faad8339e7ca0ddfd62fa79903c
12414 Author: Jon Loeliger <jdl@freescale.com>
12415 Date: Thu Nov 1 12:23:29 2007 -0500
12417 86xx: Fix broken variable reference when #def DEBUGing.
12419 Sometimes you can't reference the DDR2 controller variables.
12421 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12423 commit f9d9164d9c6b5a7f0393fd8d7e246b8a0326bc19
12424 Author: Jason Jin <Jason.jin@freescale.com>
12425 Date: Fri Oct 26 18:32:00 2007 +0800
12427 make 8610 board use pixis reset
12429 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
12431 commit db74b3c1c9481a6bffbf8cd445e5bcbf6908e836
12432 Author: Jason Jin <Jason.jin@freescale.com>
12433 Date: Mon Oct 29 19:26:21 2007 +0800
12435 Unify pixis_reset altbank across board families
12437 Basically, refactor the CFG_PIXIS_VBOOT_MASK values
12438 into the separate board config files.
12440 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
12441 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12443 commit 64bf555465c7926be13e1046ac0d0f05ac72829c
12444 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12445 Date: Wed Nov 7 08:19:21 2007 +0100
12447 Fix warning: pointer targets in assignment differ in signedness
12449 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12451 commit 7a60ee7c6248a958c5757d3660a1702723a2786d
12452 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12453 Date: Wed Nov 7 08:19:19 2007 +0100
12455 Fix warning differ in signedness in common/cmd_ide.c
12457 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12459 commit f31d38b9eea9b32f6a1ac848a298cc71ca4c9a03
12460 Author: Stefan Roese <sr@denx.de>
12461 Date: Fri Nov 16 14:16:54 2007 +0100
12463 ppc4xx: Enable 405EX PCIe UTL register configuration
12465 Till now the UTL registers on 405EX were not initialized but left with
12466 their default values. This patch new initializes some of the UTL
12467 registers on 405EX.
12469 Signed-off-by: Stefan Roese <sr@denx.de>
12471 commit ecdcbd4f8c1f8cefd785752f4e7536aae2a4ecf9
12472 Author: Stefan Roese <sr@denx.de>
12473 Date: Fri Nov 16 14:00:59 2007 +0100
12475 ppc4xx: Update AMCC Makalu for board rev 1.1
12477 This patch adds changes needed for Makalu rev 1.1:
12479 - Enable 2nd DDR2 bank resulting in 256MByte of SDRAM
12480 - Enable 2nd ethernet port EMAC1
12481 - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
12482 - Reset PCIe ports via GPIO upon bootup
12484 Signed-off-by: Stefan Roese <sr@denx.de>
12486 commit 4d4faae65e115e327425cd514c1a35146a85166b
12487 Author: Grant Likely <grant.likely@secretlab.ca>
12488 Date: Mon Sep 24 09:05:31 2007 -0600
12490 Group PCI and PCMCIA drivers in drivers/Makefile
12492 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
12494 commit 5798f87dc10a496d79d3177b9f5a76488987fd35
12495 Author: Grant Likely <grant.likely@secretlab.ca>
12496 Date: Mon Sep 24 09:05:31 2007 -0600
12498 Group block/flash drivers in drivers/Makefile
12500 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
12502 commit df58c81551700f058b44cacf55a7997fa63bfe0a
12503 Author: Grant Likely <grant.likely@secretlab.ca>
12504 Date: Mon Sep 24 09:05:31 2007 -0600
12506 Group USB drivers in drivers/Makefile
12508 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
12510 commit 5dbb6ed622e539b0c8493ef7e578d3a533181d29
12511 Author: Grant Likely <grant.likely@secretlab.ca>
12512 Date: Mon Sep 24 09:05:30 2007 -0600
12514 Group i2c drivers in drivers/Makefile
12516 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
12518 commit ec00c76de0e5971273905998d62d6bb119324218
12519 Author: Grant Likely <grant.likely@secretlab.ca>
12520 Date: Mon Sep 24 09:05:30 2007 -0600
12522 Group console drivers in drivers/Makefile
12524 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
12526 commit 754f230aa01b8c789fc31f8013c2487954073300
12527 Author: Grant Likely <grant.likely@secretlab.ca>
12528 Date: Mon Sep 24 09:05:30 2007 -0600
12530 Group network drivers in drivers/Makefile
12532 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
12534 commit f0037c56b0d12cd46215124667b9f83d60ef9391
12535 Author: Grant Likely <grant.likely@secretlab.ca>
12536 Date: Mon Sep 24 09:05:30 2007 -0600
12538 Build: split COBJS value into multiple lines
12540 This change is in preparation for condtitionial compile support in the
12541 build system. By spliting them all into seperate lines now, subsequent
12542 patches that change 'COBJS-y += ' into 'COBJS-$(CONFIG_<blah>) += ' will
12543 be less invasive and easier to review
12545 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
12547 commit 1b4aaffe4fb2a5e95d9111a5d94fd1f89215dce4
12548 Author: Grant Likely <grant.likely@secretlab.ca>
12549 Date: Mon Sep 24 09:05:30 2007 -0600
12551 Add .gitignore files
12553 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
12554 Acked-by: Kim Phillips <kim.phillips@freescale.com>
12556 commit 955413f35f054a82e40042f1dbcf501c6a05719b
12557 Author: Grant Likely <grant.likely@secretlab.ca>
12558 Date: Thu Nov 15 08:27:52 2007 -0700
12560 Revert "Correct relocation fixup for mpc5xx"
12562 This reverts commit 3649cd99ba815b6601868735765602f00ef3692b.
12563 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
12565 commit e15633888a058aacb31a62d2cf1278e1e4c236ab
12566 Author: Grant Likely <grant.likely@secretlab.ca>
12567 Date: Thu Nov 15 08:24:32 2007 -0700
12569 Revert "Correct fixup relocation for MPC5xxx"
12571 This reverts commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90.
12572 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
12574 commit 139365fbe566d0fc619a1ed04452ec5388f0cef8
12575 Author: Grant Likely <grant.likely@secretlab.ca>
12576 Date: Thu Nov 15 08:21:04 2007 -0700
12578 Revert "Correct fixup relocation for mpc8220"
12580 This reverts commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00.
12581 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
12583 commit 70922342369e5e39b286fe21e768a239ca07a514
12584 Author: Grant Likely <grant.likely@secretlab.ca>
12585 Date: Thu Nov 15 08:20:57 2007 -0700
12587 Revert "Correct fixup relocation for mpc824x"
12589 This reverts commit f3a52fe05923935db86985daf9438e2f70ac39aa.
12590 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
12592 commit 96279ab4cad60cb5972aa934fbe4845ac02cc75a
12593 Author: Grant Likely <grant.likely@secretlab.ca>
12594 Date: Thu Nov 15 08:20:50 2007 -0700
12596 Revert "Correct fixup relocation for mpc8260"
12598 This reverts commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96.
12599 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
12601 commit 928fe33b24cdf382a8dc8687fed24b1961cdb5d6
12602 Author: Grant Likely <grant.likely@secretlab.ca>
12603 Date: Thu Nov 15 08:20:43 2007 -0700
12605 Revert "Correct fixup relocation for mpc83xx"
12607 This reverts commit 057004f4a4863554d56cc56268bfa7c7d9738e27.
12608 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
12610 commit c93945e8f9e300860d2bf73a2549ce5794f8bd00
12611 Author: Grant Likely <grant.likely@secretlab.ca>
12612 Date: Thu Nov 15 08:20:25 2007 -0700
12614 Revert "[MPC512x] Correct fixup relocation"
12616 This reverts commit 8d17979d0359492a822a0a409d26e3a3549b4cd4.
12617 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
12619 commit c9672f81f1bdb4e8ddf62aa72ca0206e8b72aa1c
12620 Author: Stefan Roese <sr@denx.de>
12621 Date: Thu Nov 15 14:25:09 2007 +0100
12623 ppc4xx: Small AMCC Kilauea cleanup
12625 Remove not needed pci_target_init() function.
12627 Signed-off-by: Stefan Roese <sr@denx.de>
12629 commit aee747f19b460a0e9da20ff21e90fdaac1cec359
12630 Author: Stefan Roese <sr@denx.de>
12631 Date: Thu Nov 15 14:23:55 2007 +0100
12633 ppc4xx: Enable 440 GPIO init table CFG_440_GPIO_TABLE for 405 platforms
12635 - Rename CFG_440_GPIO_TABLE to CFG_4xx_GPIO_TABLE
12636 - Cleanup of the 4xx GPIO functions
12637 - Move some GPIO defines from the cpu headers ppc405.h/ppc440.h into gpio.h
12639 Signed-off-by: Stefan Roese <sr@denx.de>
12641 commit 8ada0ebf38e4073beea0309188b25d82a112a2ae
12642 Author: Stefan Roese <sr@denx.de>
12643 Date: Thu Nov 15 14:20:08 2007 +0100
12645 ppc4xx: AMCC Taihu board config file cleanup
12647 This patch makes the AMCC Taihu a little more compatible to the other
12650 Signed-off-by: Stefan Roese <sr@denx.de>
12652 commit 5e71c51d74c963d3174060c078dcacf13bdd02ef
12653 Author: Marian Balakowicz <m8@semihalf.com>
12654 Date: Thu Nov 15 13:37:28 2007 +0100
12656 [INKA4x0] NG hardware: flash support
12658 Disabled and remove inka4x0 custom flash driver, use CFI flash
12661 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
12663 commit 5fb6d7191e206cdde0e23140fd8111caed93a595
12664 Author: Marian Balakowicz <m8@semihalf.com>
12665 Date: Thu Nov 15 13:29:55 2007 +0100
12667 [INKA4x0] NG hardware: SDRAM support
12669 Add support for three new DDR chips that may be present on a NG
12670 INKA4x0 hardware: HYB25D512160BF-5, K4H511638C-7CB3, T46V32M16BN-6IT.
12672 Cleanup board/inka4x0/mt48lc16m16a2-75.h file.
12674 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
12676 commit f23cb34c367bb27585a4fdb8a75277370e7d0596
12677 Author: Marian Balakowicz <m8@semihalf.com>
12678 Date: Thu Nov 15 13:24:43 2007 +0100
12680 [INKA4x0] NG hardware: platform code update
12682 - Cleanup compile warnings.
12683 - Add missing '\0' in default environment.
12684 - Increase CFG_MONITOR_LEN to 256 KiB.
12685 - Add required CFG_USE_PPCENV.
12687 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
12689 commit 2ae64f5135e51bb18753884d1265b99e89b5aedd
12690 Author: Peter Pearse <peter.pearse@arm.com>
12691 Date: Thu Nov 15 08:58:00 2007 +0000
12693 Remove warnings re CONFIG_EXTRA_ENV_SETTINGS
12694 Remove warnings re onenand_read() & write()
12696 commit 2db916e14410e3ec1738508c7bf4dfeb2b299ae7
12697 Author: Peter Pearse <peter.pearse@arm.com>
12698 Date: Thu Nov 15 08:45:13 2007 +0000
12702 commit 1d8a49eca1c7bdc8db1c47a92f9014a29ead03ae
12703 Author: Roy Zang <tie-fei.zang@freescale.com>
12704 Date: Thu Sep 13 18:52:28 2007 +0800
12706 Enable ULi1575 Ethernet support in 8610HPCD config
12708 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
12709 Acked-by: Jon Loeliger <jdl@freescale.com>
12711 commit 54fd6c93c28a0a45352fff5dd92673401ff563f2
12712 Author: Stefan Roese <sr@denx.de>
12713 Date: Tue Nov 13 08:18:20 2007 +0100
12715 ppc4xx: lwmon5: Change PHY reset sequence for PHY MDIO address latching
12717 Signed-off-by: Stefan Roese <sr@denx.de>
12719 commit 7d0a4066b5a6b698e5fc1b66cfe9705774bbce93
12720 Author: Stefan Roese <sr@denx.de>
12721 Date: Tue Nov 13 08:06:11 2007 +0100
12723 ppc4xx: Fix 405EX PCIe UTLSET register setup
12725 Signed-off-by: Stefan Roese <sr@denx.de>
12727 commit 1ce55151c85d068f70317a8d65c61058b891afb4
12728 Author: Heiko Schocher <hs@denx.de>
12729 Date: Tue Nov 13 07:50:29 2007 +0100
12731 [UC101] SRAM now with 2 MB working.
12733 Signed-off-by: Heiko Schocher <hs@denx.de>
12735 commit 2d14684341109a69616e4d6016cd61402d55086f
12736 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12737 Date: Fri Nov 9 15:37:53 2007 +0100
12739 ppc4xx: Use generic usb-ohci driver for sequoia board
12741 This patch makes the sequoia board use the generic usb-ohci driver
12742 instead of cpu/ppc4xx/usb_ohci.c.
12744 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12745 Signed-off-by: Stefan Roese <sr@denx.de>
12747 commit 9be659ac0868dc367caa957c5c725e46b07f6a5f
12748 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12749 Date: Fri Nov 9 15:37:23 2007 +0100
12751 ppc4xx: Make USB working with CONFIG_4xx_DCACHE defined
12753 This patch disables the 44x d-cache on 'usb start' and
12754 reenables it on 'usb stop'. This should be seen as a
12755 temporary fix until the generic usb-ohci driver can
12756 life with d-cache enabled.
12758 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12759 Signed-off-by: Stefan Roese <sr@denx.de>
12761 commit fbde2169d2c48fcc9ff03489534a78ffb0a8a0d4
12762 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12763 Date: Fri Nov 9 15:36:44 2007 +0100
12765 ppc4xx: Remove redundant code from 4xx network driver
12767 This patch removes some redundant code and decrements the end
12768 address of cache flush and invalidate by 1.
12770 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12771 Signed-off-by: Stefan Roese <sr@denx.de>
12773 commit 5ca9881aad8c413ac2a82868a5e3719178254502
12774 Author: Peter Pearse <peter.pearse@arm.com>
12775 Date: Fri Nov 9 15:24:26 2007 +0000
12777 Add apollon board support
12778 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
12780 commit b53313dbfc74525d85f1e7e0102f902d5c863beb
12781 Author: Stefan Roese <sr@denx.de>
12782 Date: Fri Nov 9 12:19:58 2007 +0100
12784 ppc4xx: Remove In:/Out:/Err: boot output for AMCC Kilauea
12786 Signed-off-by: Stefan Roese <sr@denx.de>
12788 commit c7f69c340277935a6c19a956421852da944a365f
12789 Author: Stefan Roese <sr@denx.de>
12790 Date: Fri Nov 9 12:18:54 2007 +0100
12792 ppc4xx: Make output a little shorter on I2C bootrom detection
12794 Most 4xx PPC capable of using an I2C bootrom for bootstrap setting
12795 already print a line with the information which I2C bootrom is
12796 used for bootstrap configuration. So we don't need this extra line
12797 with "I2C boot EEPROM en-/dis-abled".
12799 This patch also has a little code cleanup integrated.
12801 Signed-off-by: Stefan Roese <sr@denx.de>
12803 commit 8d737a28152ec12873f8544cca1fb39a49e5e693
12804 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12805 Date: Thu Nov 8 12:50:18 2007 -0600
12807 ColdFire: MCF5329 - Remove reset registers from CCM
12809 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12811 commit 7d7cdea769a60b0a6e4c18bef7f9d648fd14b8d7
12812 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12813 Date: Thu Nov 8 12:31:11 2007 -0600
12815 ColdFire: MCF5329 - Add Reset structure to immap_5329.h
12817 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12819 commit 09b26cf00d76d75fdf7fdc4b13e4dd929743bc21
12820 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12821 Date: Thu Nov 8 12:19:01 2007 -0600
12823 ColdFire: MCF5329 - revert include/asm-m68k/m5329.h file mode
12825 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12827 commit 225a24b5e062ad94627424508ae814f51dbe1a34
12828 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12829 Date: Wed Nov 7 18:00:54 2007 -0600
12831 ColdFire: MCF5445x - Update correct RAMBAR and missing linker files
12833 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12835 commit 248c7c14835f34d5d910b45e5600050e58ca6cab
12836 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12837 Date: Wed Nov 7 17:56:15 2007 -0600
12839 ColdFire: MCF532x - Update do_reset() using core reset
12841 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12843 commit d9240a5f827eb3b476a6ba2938d01f1a9e7688f4
12844 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12845 Date: Wed Nov 7 17:51:00 2007 -0600
12847 ColdFire: Update cpu flag for 4.2-xx compiler
12849 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12851 commit 070ba56115b4da63b46e974287fa4550d4023386
12852 Author: York Sun <yorksun@freescale.com>
12853 Date: Wed Oct 31 14:59:04 2007 -0500
12855 8610: Add console frame buffer support to FSL 8610 DIU driver.
12857 Add cfb console support to FSL 8610 DIU driver.
12858 Inspect board version from PIXIS to obtain correct pixel format.
12860 Use #define CONFIG_VIDEO in config file to enable fb console.
12862 To switch monitor, set monitor variable to
12863 0 - DVI, 1 - Single link LVDS, 2 - Double link LVDS
12864 followed by "diufb init".
12866 Preserve logo bitmap at the top of the fb console.
12868 Signed-off-by: York Sun <yorksun@freescale.com>
12869 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12871 commit a877880c6949e948bd63cd6ea4e216573d2f53dd
12872 Author: York Sun <yorksun@freescale.com>
12873 Date: Mon Oct 29 13:58:39 2007 -0500
12875 8610: Add 8610 DIU display driver
12877 1280x1024 and 1024x768 @ 32 bpp are supported now.
12878 DVI, Single-link LVDS, Double-link LVDS are all supported.
12880 Environmental variable "monitor" is used to specify monitor port.
12882 A new command "diufb" is introduced to reinitialize monitor
12883 and display a BMP file in the memory. So far, 1-bit, 4-bit,
12884 8-bit and 24-bit BMP formats are supported.
12887 - initialize the diu driver
12888 Enable the port specified in the environmental variable "monitor"
12891 - display bmp file in memory.
12892 The bmp image should be no bigger than the resolution, 1280x1024
12893 for DVI and double-link LVDS, 1024x768 for single-link LVDS.
12895 Note, this driver allocate memory but doesn't free it after use
12896 It is written on purpose -- to avoid a failure of reallocation
12897 due to memory fragement.
12899 ECC of DDR is disabled for DIU performance. L2 data cache is also disabled.
12901 Signed-off-by: York Sun <yorksun@freescale.com>
12902 Signed-off-by: Jon loeliger <jdl@freescale.com>
12904 commit 52e5ddfecdda308f75782fae206b677b1810f5f9
12905 Author: York Sun <yorksun@freescale.com>
12906 Date: Wed Oct 31 10:43:59 2007 -0500
12908 FSL: Add a freescale bitmap logo.
12910 This Freescale logo is a 340 x 128 x 4bpp BMP file
12911 that can be displayed by the DIU Framebuffer driver.
12913 Signed-off-by: York Sun <yorksun@freescale.com>
12914 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12916 commit 1815338fbd1c0f94f8276d2891b99caa5a05f622
12917 Author: York Sun <yorksun@freescale.com>
12918 Date: Mon Oct 29 13:57:53 2007 -0500
12920 8610: Make some extra debug environment variables conditional.
12922 One may #define ENV_DEBUG to get them back again.
12924 Signed-off-by: York Sun <yorksun@freescale.com>
12926 commit 761421ccca80a9fb37b19c37aa61d46ef75e0647
12927 Author: Jason Jin <Jason.jin@freescale.com>
12928 Date: Mon Oct 29 19:26:21 2007 +0800
12930 8610: Actually enable pixis_reset CONFIGs
12932 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
12934 commit f3bceaab230b4748d0afc4109b6837308f018b40
12935 Author: Jason Jin <Jason.jin@freescale.com>
12936 Date: Fri Oct 26 18:31:59 2007 +0800
12938 Fix the BAT definition of PCI IO on 8610 board
12940 The address in the BAT register is aligned with the BAT size.
12941 The original definition actually did not define BAT for PCIE2 IO.
12942 This patch fix this.
12944 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
12946 commit 9f23ca334a6f5f021ef9e9d0fad9da80d63b2d56
12947 Author: Jason Jin <Jason.jin@freescale.com>
12948 Date: Mon Oct 29 19:26:21 2007 +0800
12950 Unify pixis_reset altbank across board families
12952 Basically, refactor the CFG_PIXIS_VBOOT_MASK values
12953 into the separate board config files.
12955 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
12956 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12958 commit a8318ec205c8e8794b5f9f1b8584abadb440e8ba
12959 Author: Jason Jin <Jason.jin@freescale.com>
12960 Date: Fri Oct 26 18:32:00 2007 +0800
12962 make 8610 board use pixis reset
12964 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
12966 commit 9c84709eedce9c680dd695984ab7d2328f4f04f5
12967 Author: Jon Loeliger <jdl@freescale.com>
12968 Date: Thu Nov 1 12:23:29 2007 -0500
12970 86xx: Fix broken variable reference when #def DEBUGing.
12972 Sometimes you can't reference the DDR2 controller variables.
12974 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12976 commit 1f103105a3746ab12279b63b8c1d372c0ce2cc58
12977 Author: Roy Zang <tie-fei.zang@freescale.com>
12978 Date: Mon Nov 5 17:39:24 2007 +0800
12980 Implement general ULi 526x Ethernet driver support in U-boot
12982 This patch implements general ULi 526x Ethernet driver.
12983 Until now, it is the only native Ethernet port on
12984 MPC8610HPCD board, but it could be used on other boards
12985 with ULi 526x Ethernet port as well.
12987 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
12988 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
12989 Acked-by: Jon Loeliger <jdl@freescale.com>
12990 Signed-off-by: Ben Warren <bwarren@qstreams.com>
12992 commit 71bc6e6474fea8ef481b9b45d1edd7ad1f6dfbbd
12993 Author: Larry Johnson <lrj@arlinx.com>
12994 Date: Thu Nov 1 08:46:50 2007 -0500
12996 NET: Add Ethernet 1000BASE-X support for PPC4xx
12998 This patch adds support for 1000BASE-X to functions "miiphy_speed ()" and
12999 "miiphy_duplex()". It also adds function "miiphy_is_1000base_x ()", which
13000 returns non-zero iff the PHY registers are configured for 1000BASE-X. The
13001 "mii info" command is modified to distinguish between 1000BASE-T and -X.
13003 Signed-off-by: Larry Johnson <lrj@acm.org>
13004 Signed-off-by: Ben Warren <bwarren@qstreams.com>
13006 commit 298035df4948b113d29ac0e694717d34b95bc5dc
13007 Author: Larry Johnson <lrj@arlinx.com>
13008 Date: Wed Oct 31 11:21:29 2007 -0500
13010 NET: Cosmetic changes
13012 Signed-off-by: Larry Johnson <lrj@acm.org>
13013 Signed-off-by: Ben Warren <bwarren@qstreams.com>
13015 commit 654f38b3a387886996a5a75771fbfc29cb4f225e
13016 Author: Stefan Roese <sr@denx.de>
13017 Date: Mon Nov 5 07:43:05 2007 +0100
13019 ppc4xx: Make output a little shorter on PCIe detection
13021 Now not max 3 lines but 2 lines are printed per PCIe port.
13023 Signed-off-by: Stefan Roese <sr@denx.de>
13025 commit 992742a5b09d9040adbd156fb90756af66ade310
13026 Author: Wolfgang Denk <wd@denx.de>
13027 Date: Sat Nov 3 23:09:27 2007 +0100
13029 Cleanup coding style; update CHANGELOG
13031 Signed-off-by: Wolfgang Denk <wd@denx.de>
13033 commit e881cb563e32f45832b7b6db77bdcd017adcbb41
13034 Author: Bruce Adler <bruce.adler@ccpu.com>
13035 Date: Fri Nov 2 13:15:42 2007 -0700
13037 fix wording in README
13039 Changed the wording to properly describe the shadowing
13040 of the environment from ROM to RAM
13042 Signed-off-by: Bruce Adler <bruce.adler@acm.org>
13044 commit ad845beef06245426c57b53dcdc01b7dc70e0d45
13045 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
13046 Date: Wed Oct 31 02:18:15 2007 +0900
13048 blackfin: Move `-D__BLACKFIN__' to $(ARCH)_config.mk
13050 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
13052 commit ec22755799466c8a103664bb3a5e647bf9c238f4
13053 Author: Vlad Lungu <vlad@comsys.ro>
13054 Date: Thu Oct 25 16:08:14 2007 +0300
13056 Trimmed some variables in ne2000.c
13058 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
13060 commit eb6f214d3644b2a77968c176ed36dcf858cfe7e0
13061 Author: Zhang Wei <wei.zhang@freescale.com>
13062 Date: Thu Oct 25 17:51:27 2007 +0800
13064 Fix the issue of usb_kbd driver missing the scan code of key 'z'.
13066 The scan code of the key 'z' is 0x1d, which should be handled.
13068 The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
13071 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
13073 commit bbf4796f6498fbade56d56eff3a0a49b299d93e5
13074 Author: Zhang Wei <wei.zhang@freescale.com>
13075 Date: Thu Oct 25 17:30:04 2007 +0800
13077 Fix USB support issue for MPC8641HPCN board.
13079 The configuration file has already enabled USB, but it
13080 missed definition of CFG_OHCI_SWAP_REG_ACCESS, the USB
13081 on MPC8641HPCN can not work because of the wrong USB
13084 And add the USB command to U-Boot commands list.
13086 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
13088 commit 4e62041023dc3de9d98d977bb080235bc6d035e0
13089 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13090 Date: Wed Oct 24 18:16:01 2007 +0200
13092 Use config_cmd_default.h instead of config_cmd_all.h
13094 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13096 commit 56622f87857439b1c221e9deef11a9d5bb5d4308
13097 Author: Marian Balakowicz <m8@semihalf.com>
13098 Date: Wed Oct 24 01:37:36 2007 +0200
13100 TQM5200: Call usb_cpu_init() during board init
13102 usb_cpu_init() configures GPS USB pins, clocks, etc. and
13103 is required for proper operation of kernel USB subsystem.
13104 This setup was previously done in the kernel by the fixup
13105 code which is being removed, thus low level init must be
13106 done by U-boot now.
13108 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
13110 commit 29c29c0267fe857e72014ce90c5d35b2ef6302bd
13111 Author: Guennadi Liakhovetski <lg@denx.de>
13112 Date: Tue Oct 23 16:25:50 2007 +0200
13116 An obvious typo. Originally fixed in linkstation u-boot port.
13118 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
13120 commit 59543fe00a4ce720ef9f5aa7fb387c6daf1c7d78
13121 Author: Guennadi Liakhovetski <lg@denx.de>
13122 Date: Tue Oct 23 14:35:05 2007 +0200
13124 Fix a typo in cpu/mpc824x/interrupts.c
13126 Since December 2003 the timer_interrupt_cpu() function in
13127 cpu/mpc824x/interrupts.c contains what seems to be a superfluous
13128 parameter. Remove it.
13130 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
13132 commit c9e7b9b9a1700fe009678d1f9b41e6364ac5df2d
13133 Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
13134 Date: Wed Oct 17 11:13:51 2007 +0200
13136 add ft_cpu_setup(..) on mpc8260
13138 Add ft_cpu_setup(..)-function to adapt it for use with libfdt
13139 based on code from mpc5xxx
13141 Sigend-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
13144 commit 6abd82e19ae93c0b4d104e50165e235915ec0875
13145 Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
13146 Date: Wed Oct 17 11:18:42 2007 +0200
13148 changes for IDS8247 board support
13150 To get the IDS8247 board working following are done:
13151 - FCC2 is deactivated
13152 - FCC1 is activated
13154 - CFI driver is activated
13155 - Adapted for use with LIBFDT
13157 Signed-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
13160 commit 3d6cb3b24add6415f86a0f013ea40f5639b90047
13161 Author: Stefan Roese <sr@denx.de>
13162 Date: Sat Nov 3 12:08:28 2007 +0100
13164 ppc4xx: Add AMCC Kilauea/Haleakala NAND booting support
13166 This patch adds NAND booting support for the AMCC 405EX(r) eval boards.
13167 Again, only one image supports both targets.
13169 Signed-off-by: Stefan Roese <sr@denx.de>
13171 commit 8b6684a698500be9c142ec2c9f46cfc348e17f0c
13172 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
13173 Date: Wed Oct 24 15:48:37 2007 +0200
13175 ATSTK1002: Remove default ethernet addresses
13177 Wolfgang is right: It's not a good idea to set up default initial
13178 ethernet addresses for a board, even though they belong to the local
13181 This will change the failure mode from "IT manager screams at you for
13182 using duplicate ethernet addresses" to a nice error message explaining
13183 that the ethernet address hasn't been set properly.
13185 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
13187 commit e5c794e491a57d829b6d8733e2ed8368a2269abf
13188 Author: Justin Flammia <jflammia@savantav.com>
13189 Date: Mon Oct 29 17:40:35 2007 -0400
13193 This is a multi-part message in MIME format.
13195 commit e6e505eae94ed721e123e177489291fc4544b7b8
13196 Author: Justin Flammia <jflammia@savantav.com>
13197 Date: Mon Oct 29 17:19:03 2007 -0400
13199 Found a bug in the way the DHCP Request packet is built, where the IP address
13200 that is offered by the server is bound to prematurely. This patch is a fix of
13201 that bug where the IP address offered by the DHCP server is not used until
13202 after the DHCP ACK from the server is received.
13204 Signed-off-by: Justin Flammia <jflammia@savantav.com>
13205 Signed-off-by: Ben Warren <bwarren@qstreams.com>
13207 commit 5d96d40d3f36da33348e68f9ea993f383e11f997
13208 Author: Stefan Roese <sr@denx.de>
13209 Date: Wed Oct 31 20:58:34 2007 +0100
13211 ppc4xx: Fix acadia_nand build problem
13213 Since the cache handling functions were moved from start.S into cache.S
13214 the acadia NAND booting Makfile needs to be adapted accordingly.
13216 Signed-off-by: Stefan Roese <sr@denx.de>
13218 commit ea2e142843533ca593fcb5cb3e1daf1b7f5e5949
13219 Author: Stefan Roese <sr@denx.de>
13220 Date: Wed Oct 31 20:57:11 2007 +0100
13222 ppc4xx: Add CONFIG_4xx_DCACHE compile options to enable cached SDRAM
13224 This patch adds the CONFIG_4xx_DCACHE options to some SDRAM init files
13225 and to the Sequoia TLB init code. Now the cache can be enabled on 44x
13226 boards by defining CONFIG_4xx_DCACHE in the board config file. This
13227 option will disappear, when more boards use is successfully and no
13228 more known problems exist.
13230 This is tested successfully on Sequoia and Katmai. The only problem that
13231 needs to be fixed is, that USB is not working on Sequoia right now, since
13232 it will need some cache handling code too, similar to the 4xx EMAC driver.
13234 Signed-off-by: Stefan Roese <sr@denx.de>
13236 commit 3db93b8bedd32e914b38976141b3fdf4ea3ff738
13237 Author: Stefan Roese <sr@denx.de>
13238 Date: Wed Oct 31 20:51:10 2007 +0100
13240 ppc4xx: Enable CPU POST test for 4xx with dcache enabled
13242 Now with caches enabled (i- and d-cache) on 44x, we need a chance to
13243 disable the cache for the CPU POST tests, since these tests consist
13244 of self modifying code. This is done via the new change_tlb() function.
13246 Signed-off-by: Stefan Roese <sr@denx.de>
13248 commit f71b2888b4b3c870909a0341427b2a914246f81f
13249 Author: Stefan Roese <sr@denx.de>
13250 Date: Wed Oct 31 20:47:26 2007 +0100
13252 ppc4xx: Change 4xx POST ethernet test to handle cached memory too
13254 This patch enables the 4xx EMAC POST driver to work too, when dcache is
13257 Signed-off-by: Stefan Roese <sr@denx.de>
13259 commit a2685904061b35a17583d65fe47cdc2686a69eaa
13260 Author: Stefan Roese <sr@denx.de>
13261 Date: Wed Oct 31 20:45:53 2007 +0100
13263 ppc4xx: Remove temporary TLB entry in POST cache test only for 440
13265 Signed-off-by: Stefan Roese <sr@denx.de>
13267 commit ff768cb168d8157c24a25016dbfbeb465e47f420
13268 Author: Stefan Roese <sr@denx.de>
13269 Date: Wed Oct 31 18:01:24 2007 +0100
13271 ppc4xx: Change 4xx ethernet driver to handle cached memory too
13273 This patch enables the 4xx EMAC driver to work too, when dcache is
13276 Signed-off-by: Stefan Roese <sr@denx.de>
13278 commit 483e09a223c666269ef81d3573a6591b1046b0ef
13279 Author: Stefan Roese <sr@denx.de>
13280 Date: Wed Oct 31 17:59:22 2007 +0100
13282 ppc4xx: Add change_tlb function to modify I attribute of TLB(s)
13284 This function is used to either turn cache on or off in a specific
13287 Signed-off-by: Stefan Roese <sr@denx.de>
13289 commit d25dfe08fbd1220cb994e7e6b105049aa9aa8e79
13290 Author: Stefan Roese <sr@denx.de>
13291 Date: Wed Oct 31 17:57:52 2007 +0100
13293 ppc4xx: Remove cache definition from 4xx board config files
13295 All 4xx board config files don't need the cache definitions anymore.
13296 These are now defined in common headers.
13298 Signed-off-by: Stefan Roese <sr@denx.de>
13300 commit 9b94ac61d2176185c30adf0793e079ec30e68687
13301 Author: Stefan Roese <sr@denx.de>
13302 Date: Wed Oct 31 17:55:58 2007 +0100
13304 ppc4xx: Rework 4xx cache support
13306 New cache handling functions added and all existing functions
13307 moved from start.S into seperate cache.S.
13309 Signed-off-by: Stefan Roese <sr@denx.de>
13311 commit 06713773da4ac3d390c63d82641eb553224b27c2
13312 Author: Stefan Roese <sr@denx.de>
13313 Date: Tue Oct 23 18:03:12 2007 +0200
13315 ppc4xx: Remove compiler warning from previous commit
13317 Signed-off-by: Stefan Roese <sr@denx.de>
13319 commit 6fa397df67c0f269e4528bf181a6e8c88f9723f9
13320 Author: Stefan Roese <sr@denx.de>
13321 Date: Tue Oct 23 14:40:30 2007 +0200
13323 ppc4xx: Remove temporary TLB entry in POST cache test
13325 Signed-off-by: Stefan Roese <sr@denx.de>
13327 commit 1338e6a81834099ba19733b69aafd8ef5f098094
13328 Author: Stefan Roese <sr@denx.de>
13329 Date: Tue Oct 23 14:05:08 2007 +0200
13331 ppc4xx: Change autonegotiation timeout from 4 to 5 seconds
13333 I lately noticed, that newer 4xx board with GBit support sometimes don't
13334 finish link autonegotiation in 4 seconds. Changing this timeout to 5
13335 seconds seems fine here.
13337 Signed-off-by: Stefan Roese <sr@denx.de>
13339 commit 2d83476a4c1c9911d158a3f8a4312d354bc1bdb7
13340 Author: Stefan Roese <sr@denx.de>
13341 Date: Tue Oct 23 14:03:17 2007 +0200
13343 ppc4xx: Change 4xx_enet & miiphy to use out_be32() and friends
13345 This patch changes all in32/out32 calls to use the recommended in_be32/
13346 out_be32 macros instead.
13348 Signed-off-by: Stefan Roese <sr@denx.de>
13350 commit 7d47cee2cc57f907380f2c06f5b6c683d03e423a
13351 Author: Stefan Roese <sr@denx.de>
13352 Date: Thu Oct 25 12:24:59 2007 +0200
13354 ppc4xx: Fix POST ethernet test for Haleakala
13356 The POST ethernet test needed to be changed to dynamically determine
13357 the count of ethernet devices. This code is cloned from the 4xx
13360 Signed-off-by: Stefan Roese <sr@denx.de>
13362 commit f10493c6d77a1e07a6c2ff4d772937a5e7359d6a
13363 Author: Stefan Roese <sr@denx.de>
13364 Date: Tue Oct 23 11:31:05 2007 +0200
13366 ppc4xx: Correct UART input clock calculation and passing to fdt
13368 We now use a value in the gd (global data) structure for the UART input
13369 frequency, since the PPC4xx_SYS_INFO struct is always rewritten completely
13372 Signed-off-by: Stefan Roese <sr@denx.de>
13374 commit 353f2688b4e0fc7b969bc70a02be4b40bf0dd124
13375 Author: Stefan Roese <sr@denx.de>
13376 Date: Tue Oct 23 10:10:08 2007 +0200
13378 ppc4xx: Add initial AMCC Haleakala PPC405EXr eval board support
13380 The Haleakala is nearly identical with the Kilauea eval board. The only
13381 difference is that the 405EXr only supports one EMAC and one PCIe
13382 interface. This patch adds support for the Haleakala board by using
13383 the identical image for Kilauea and Haleakala. The distinction is done
13384 by comparing the PVR.
13386 Signed-off-by: Stefan Roese <sr@denx.de>
13388 commit 9f798766aa85e62eb8fa8c721e148df609b78137
13389 Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
13390 Date: Tue Oct 23 08:29:10 2007 +0200
13392 ppc4xx: Fixed offset of refresh rate type for Bamboo on-board DDR SDRAM
13394 This patch also adds a note to the fixed DDR setup for Bamboo NAND booting:
13397 As found out by Eugene O'Brien <eugene.obrien@advantechamt.com>, the fixed
13398 DDR setup has problems (U-Boot crashes randomly upon TFTP), when the DIMM
13399 modules are still plugged in. So it is recommended to remove the DIMM
13400 modules while using the NAND booting code with the fixed SDRAM setup!
13402 Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
13403 Signed-off-by: Stefan Roese <sr@denx.de>
13405 commit afe9fa59cb63b4f9d16bf01c93eb212f25a38c2a
13406 Author: Stefan Roese <sr@denx.de>
13407 Date: Mon Oct 22 16:24:44 2007 +0200
13409 ppc4xx: Add SNTP support to AMCC Katmai, Kilauea & Makalu boards
13411 Signed-off-by: Stefan Roese <sr@denx.de>
13413 commit 3248f63ad89cb031491edb7016587fe6e9a238b9
13414 Author: Stefan Roese <sr@denx.de>
13415 Date: Mon Oct 22 16:22:40 2007 +0200
13417 ppc4xx: Rework of 4xx serial driver (4)
13421 - Use in_8/out_8 macros instead of in8/out8
13422 - No need for UART_BASE marco anymore, now really handled via function
13424 - serial_init_common() introduced
13425 - Further coding style cleanup
13427 Signed-off-by: Stefan Roese <sr@denx.de>
13429 commit e61cb8163a66b8a135696ae232e2bead1ce0a049
13430 Author: Stefan Roese <sr@denx.de>
13431 Date: Mon Oct 22 15:45:49 2007 +0200
13433 ppc4xx: Rework of 4xx serial driver (3)
13435 Change all linker scripts to reference the changed driver name iop480_uart.o.
13437 Signed-off-by: Stefan Roese <sr@denx.de>
13439 commit 882ae41274921f9016131806bdeb27e19606f47a
13440 Author: Stefan Roese <sr@denx.de>
13441 Date: Mon Oct 22 15:44:39 2007 +0200
13443 ppc4xx: Rework of 4xx serial driver (2)
13445 Change all linker scripts to reference the changed driver name 4xx_uart.o.
13447 Note: In most cased all these explicit referencing of these object files
13448 in the linker scripts is not neccessary. Only for manually embedded
13449 environment into the U-Boot image, which is not done is most cases.
13451 Signed-off-by: Stefan Roese <sr@denx.de>
13453 commit ad31e40bed042cb670d0036fea96435007afb838
13454 Author: Stefan Roese <sr@denx.de>
13455 Date: Mon Oct 22 15:09:59 2007 +0200
13457 ppc4xx: Rework of 4xx serial driver (1)
13459 This patch starts the rework of the PPC4xx serial driver. First we split
13460 the file into two seperate files, one 4xx_uart.c with the 405/440 UART
13461 handling code and the other one iop480_uart.c with the UART code for the
13462 PLX-Tech IOP480 PPC (PPC403 based).
13464 Signed-off-by: Stefan Roese <sr@denx.de>
13466 commit 764e7417ee5f6e25b1715720e7d7dd3487109385
13467 Author: Stefan Roese <sr@denx.de>
13468 Date: Mon Oct 22 10:30:38 2007 +0200
13470 ppc4xx: Correct UART input clock calculation and passing to fdt
13472 Signed-off-by: Stefan Roese <sr@denx.de>
13474 commit 211ea91ac6c225bec7e668a03d0ba7d7310679fa
13475 Author: Stefan Roese <sr@denx.de>
13476 Date: Mon Oct 22 07:34:34 2007 +0200
13478 ppc4xx: Add initial AMCC Makalu 405EX support
13480 Signed-off-by: Stefan Roese <sr@denx.de>
13482 commit fa8aea20456e6f1dba43f46bcc72024dd9499998
13483 Author: Stefan Roese <sr@denx.de>
13484 Date: Mon Oct 22 07:33:52 2007 +0200
13486 ppc4xx: Add freqUART to CPU speed detection
13488 This value is needed later for the device tree configuration of
13491 Signed-off-by: Stefan Roese <sr@denx.de>
13493 commit 837c730b4d7c6b1ddf3d1e247cb4445005d9bf0d
13494 Author: Stefan Roese <sr@denx.de>
13495 Date: Sun Oct 21 14:26:29 2007 +0200
13497 ppc: Small Kilauea cleanup of config file
13499 Signed-off-by: Stefan Roese <sr@denx.de>
13501 commit 758c037aeead34b49631b8da3a90b1bba14c0410
13502 Author: Stefan Roese <sr@denx.de>
13503 Date: Sun Oct 21 08:16:12 2007 +0200
13505 rtc: Add Xicor/Intersil X1205 RTC support
13507 This patch adds support for the Xicor/Intersil X1205 RTC used on the
13508 AMCC Makalu eval board. This driver is basically cloned from the Linux
13509 driver version (2.6.23).
13511 This patch also introduces the Linux bcd.h header for the BCD2BIN/
13512 BIN2BCD conversions. In the future some of the other U-Boot RTC driver
13513 should be converted to also use this header instead of implementing
13514 their own local copy of these functions/macros.
13516 Signed-off-by: Stefan Roese <sr@denx.de>
13518 commit 087dfdb79b5fd1ab99a26990c62a732c01a8c7f6
13519 Author: Stefan Roese <sr@denx.de>
13520 Date: Sun Oct 21 08:12:41 2007 +0200
13522 ppc4xx: Consolidate some of the 405 and 440 macros/structs into 4xx
13524 This patch moves some common 4xx macros and the PPC405_SYS_INFO/
13525 PPC440_SYS_INFO structure into the common ppc4xx.h header.
13527 Lot's of other macros are good candidates to be consolidated this way
13530 Signed-off-by: Stefan Roese <sr@denx.de>
13532 commit 770c7af5800f598d22730d1f4b70f16c9b33512e
13533 Author: Stefan Roese <sr@denx.de>
13534 Date: Sun Oct 21 08:05:18 2007 +0200
13536 ppc4xx: Fix size setup in Kilauea DDR2 init routine
13538 The size was initilized wrong. Instead of 256MB, the DDR2 controller
13539 was setup to 512MB. Now the correct values is used.
13541 This patch also does a little cleanup and adds a comment here.
13543 Signed-off-by: Stefan Roese <sr@denx.de>
13545 commit f6ba9b56607d4b27550301c7c7f6b55b654fd62a
13546 Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
13547 Date: Thu Oct 18 17:29:04 2007 +0200
13549 ppc4xx: Define CONFIG_BOOKE for all PPC440 based processors
13551 CONFIG_BOOKE must be defined for PPC440 processors so that the proper SPR
13552 number is used to access system registers.
13554 Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
13555 Signed-off-by: Stefan Roese <sr@denx.de>
13557 commit c36c68160333ac5fe41ec3db12a728b7075b3912
13558 Author: Stefan Roese <sr@denx.de>
13559 Date: Thu Oct 18 07:42:27 2007 +0200
13561 ppc4xx: Change inbound PCIe location for endpoint tests on Katmai
13563 On Yucca & Katmai, the inbound memory map pointed to 0x4.0000.0000, which
13564 is the internal SRAM. Since I now ported and tested this endpoint mode
13565 on Kilauea successfully to map to 0 (SDRAM), I also changed this for
13568 Yucca will stay at internal SRAM for now. Not sure if somebody relies on
13571 Signed-off-by: Stefan Roese <sr@denx.de>
13573 commit 5cb4af4791f61843432155142b6cfac901f66c10
13574 Author: Stefan Roese <sr@denx.de>
13575 Date: Thu Oct 18 07:39:38 2007 +0200
13577 ppc4xx: Add PCIe endpoint support on Kilauea (405EX)
13579 This patch adds endpoint support for the AMCC Kilauea eval board. It can
13580 be tested by connecting a reworked PCIe cable (only 1x lane singles
13581 connected) to another root-complex.
13583 In this test setup, a 64MB inbound window is configured at BAR0 which maps
13584 to 0 on the PLB side. So accessing this BAR0 from the root-complex will
13585 access the first 64MB of the SDRAM on the PPC side.
13587 Signed-off-by: Stefan Roese <sr@denx.de>
13589 commit d4cb2d17946466740afeb195a57d6cb290bf4cc0
13590 Author: Stefan Roese <sr@denx.de>
13591 Date: Sat Oct 13 16:43:23 2007 +0200
13593 ppc4xx: Dynamic configuration of 4xx PCIe mode as root or endpoint mode
13595 This patch adds support for dynamic configuration of PCIe ports for the
13596 AMCC PPC4xx boards equipped with PCIe interfaces. These are the PPC440SPe
13597 boards Yucca & Katmai and the 405EX board Kilauea.
13599 This dynamic configuration is done via the "pcie_mode" environement
13600 variable. This variable can be set to "EP" or "RP" for endpoint or
13601 rootpoint mode. Multiple values can be joined via the ":" delimiter.
13606 This way, PCIe port 0 will be configured as rootpoint, PCIe port 1 and 2
13609 Per default Yucca will be configured as:
13612 Per default Katmai will be configured as:
13613 pcie_mode=RP:RP:REP
13615 Per default Kilauea will be configured as:
13618 Signed-off-by: Tirumala R Marri <tmarri@amcc.com>
13619 Signed-off-by: Stefan Roese <sr@denx.de>
13621 commit fd671802b67a0ef37a06124fa2ce85f00aa22c6f
13622 Author: Stefan Roese <sr@denx.de>
13623 Date: Thu Oct 11 11:15:59 2007 +0200
13625 ppc4xx: Enable device tree support (fdt) on Kilauea per default
13627 This patch enables the fdt support on the AMCC Kilauea eval board.
13628 Additionally now EBC ranges fdt fixup is included to support NOR
13629 FLASH mapping via the Linux physmap_of driver.
13631 This Kilauea port now support booting arch/ppc and arch/powerpc
13632 Linux kernels. The default environment "net_nfs" is for arch/ppc
13633 and "net_nfs_fdt" is for arch/powerpc. In the long run, arch/ppc
13634 support will be removed.
13636 Signed-off-by: Stefan Roese <sr@denx.de>
13638 commit 4994ffd890b9d95d807387a9b7bd8a4803ee406e
13639 Author: Stefan Roese <sr@denx.de>
13640 Date: Thu Oct 11 11:11:45 2007 +0200
13642 ppc4xx: Add additional debug info to 4xx fdt support
13644 Signed-off-by: Stefan Roese <sr@denx.de>
13646 commit db3232ddb058d0ed0bc31f7c5c296748a1afac67
13647 Author: Stefan Roese <sr@denx.de>
13648 Date: Fri Oct 5 21:28:58 2007 +0200
13650 ppc4xx: Fix small merge problems with CPCI440 and Acadia boards
13652 Signed-off-by: Stefan Roese <sr@denx.de>
13654 commit 1941cce71b1ae975602854045061e82f94ecd012
13655 Author: Stefan Roese <sr@denx.de>
13656 Date: Fri Oct 5 17:35:10 2007 +0200
13658 ppc4xx: Fix small merge problem in 4xx_enet.c
13660 Signed-off-by: Stefan Roese <sr@denx.de>
13662 commit 566806ca1a1bf4d895daaf0b2ba5494abbffebaf
13663 Author: Stefan Roese <sr@denx.de>
13664 Date: Fri Oct 5 17:11:30 2007 +0200
13666 ppc4xx: Add initial AMCC Kilauea 405EX support
13668 Signed-off-by: Stefan Roese <sr@denx.de>
13670 commit dbbd125721aea6645fdb962f36bd41f59e272f9d
13671 Author: Stefan Roese <sr@denx.de>
13672 Date: Fri Oct 5 17:10:59 2007 +0200
13674 ppc4xx: Add PPC405EX support
13676 Signed-off-by: Stefan Roese <sr@denx.de>
13678 commit 1d7b874e9c9a7c66f5d8da9ec78a3733765d3e31
13679 Author: Stefan Roese <sr@denx.de>
13680 Date: Fri Oct 5 17:09:36 2007 +0200
13682 ppc4xx: Cleanup of 4xx PCI and PCIe support (renaming)
13684 Signed-off-by: Stefan Roese <sr@denx.de>
13686 commit 4f14ed6230b9c109aac9a6fb878497dabd44c2db
13687 Author: Stefan Roese <sr@denx.de>
13688 Date: Fri Oct 5 17:07:50 2007 +0200
13690 ppc4xx: Add initial fdt support to 4xx (first needed on 405EX)
13692 Signed-off-by: Stefan Roese <sr@denx.de>
13694 commit a424a8bb2924b90724b944165d3141f1fa8dfe5b
13695 Author: Stefan Roese <sr@denx.de>
13696 Date: Fri Oct 5 17:04:57 2007 +0200
13698 POST: Add 405EX support to 4xx UART POST test
13700 Signed-off-by: Stefan Roese <sr@denx.de>
13702 commit 4f2e92c11f6e2392fc8187829211a5ca7f0c1e12
13703 Author: Stefan Roese <sr@denx.de>
13704 Date: Fri Oct 5 15:10:02 2007 +0200
13706 DTT: Prepare DS1775 driver for use of different I2C addresses
13708 Signed-off-by: Stefan Roese <sr@denx.de>
13710 commit 19e93b1e16d267220440d827b920fbad8abfa70f
13711 Author: Stefan Roese <sr@denx.de>
13712 Date: Fri Oct 5 14:23:43 2007 +0200
13714 ppc4xx: 4xx_pcie: Change PCIe status output to match common style
13716 Signed-off-by: Stefan Roese <sr@denx.de>
13718 commit ff68f66bcb0da847845aa2fac11eba6c25938c99
13719 Author: Stefan Roese <sr@denx.de>
13720 Date: Fri Oct 5 09:22:33 2007 +0200
13722 ppc4xx: 4xx_pcie: Disable debug output as default
13724 Signed-off-by: Stefan Roese <sr@denx.de>
13726 commit 97923770cb52b64d69eec958a11b2eda8d46e0f7
13727 Author: Stefan Roese <sr@denx.de>
13728 Date: Fri Oct 5 09:18:23 2007 +0200
13730 ppc4xx: 4xx_pcie: More general cleanup and 405EX PCIe support added
13732 Signed-off-by: Stefan Roese <sr@denx.de>
13734 commit 4dbee8a90df613eb517aadbecebd70f168913d30
13735 Author: Stefan Roese <sr@denx.de>
13736 Date: Fri Oct 5 07:57:20 2007 +0200
13738 ppc4xx: 4xx_pcie: Change CFG_PCIE_MEMSIZE to 128MB on Yucca & Katmai
13740 128MB seems to be the smallest possible value for the memory size
13741 for on PCIe port. With this change now the BAR's of the PCIe cards
13742 are accessible under U-Boot.
13744 One big note: This only works for PCIe port 0 & 1. For port 2 this
13745 currently doesn't work, since the base address is now 0xc0000000
13746 (0xb0000000 + 2 * 0x08000000), and this is already occupied by
13747 CFG_PCIE0_CFGBASE. But solving this issue for port 2 would mean
13748 to change the base addresses completely and this change would have
13749 too much impact right now.
13751 This patch adds debug output to the 4xx pcie driver too.
13753 Signed-off-by: Stefan Roese <sr@denx.de>
13755 commit 6d95289281ed2958ebf76d2b55f86bbd88591fd2
13756 Author: Stefan Roese <sr@denx.de>
13757 Date: Wed Oct 3 21:16:32 2007 +0200
13759 ppc4xx: 4xx_pcie: Fix problem with SDRN access using port number as idx
13761 Signed-off-by: Stefan Roese <sr@denx.de>
13763 commit 3048bcbf0bad262378c5af68f2bf6778fb7d829a
13764 Author: Stefan Roese <sr@denx.de>
13765 Date: Wed Oct 3 15:01:02 2007 +0200
13767 ppc4xx: Rename 405gp_pci to 4xx_pci since its used on all 4xx platforms
13769 These files were introduced with the IBM 405GP but are currently used on all
13770 4xx PPC platforms. So the name doesn't match the content anymore. This patch
13771 renames the files to 4xx_pci.c/h.
13773 Signed-off-by: Stefan Roese <sr@denx.de>
13775 commit 94276eb0a7a35b9e8c053d589ae225b0f017a237
13776 Author: Stefan Roese <sr@denx.de>
13777 Date: Wed Oct 3 14:14:58 2007 +0200
13779 ppc4xx: Add a comment for 405EX PCIe endpoint configuration
13781 Signed-off-by: Stefan Roese <sr@denx.de>
13783 commit 03d344bb6a5f082ea10ec9d753558ea7dfd1c626
13784 Author: Stefan Roese <sr@denx.de>
13785 Date: Wed Oct 3 10:38:09 2007 +0200
13787 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (3)
13789 (3) This patch introduces macros like SDRN_PESDR_DLPSET(port) to access
13790 the SDR registers of the PCIe ports. This makes the overall design
13791 clearer, since it removed a lot of switch statements which are not
13794 Also, the functions ppc4xx_init_pcie_rootport() and
13795 ppc4xx_init_pcie_entport() are merged into a single function
13796 ppc4xx_init_pcie_port(), since most of the code was duplicated.
13797 This makes maintainance and porting to other 4xx platforms
13800 Signed-off-by: Stefan Roese <sr@denx.de>
13802 commit 026f71106871f31d17d0ea0db9a7547ff92934bc
13803 Author: Stefan Roese <sr@denx.de>
13804 Date: Wed Oct 3 07:48:09 2007 +0200
13806 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (2)
13808 This patch is the first patch of a series to make the 440SPe PCIe code
13809 usable on different 4xx PPC platforms. In preperation for the new 405EX
13810 which is also equipped with PCIe interfaces.
13812 (2) This patch renames the functions from 440spe_ to 4xx_ with a
13813 little additional cleanup
13815 Signed-off-by: Stefan Roese <sr@denx.de>
13817 commit c7c6da23028f146d912514b95aefa3da7cf37699
13818 Author: Stefan Roese <sr@denx.de>
13819 Date: Wed Oct 3 07:34:10 2007 +0200
13821 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (1)
13823 This patch is the first patch of a series to make the 440SPe PCIe code
13824 usable on different 4xx PPC platforms. In preperation for the new 405EX
13825 which is also equipped with PCIe interfaces.
13827 (1) This patch renames the files from 440spe_pcie to 4xx_pcie
13829 Signed-off-by: Stefan Roese <sr@denx.de>
13831 commit 245a362ad3c0c1b84fccc9fec7b623eb14f6e502
13832 Author: Marian Balakowicz <m8@semihalf.com>
13833 Date: Wed Oct 24 01:37:36 2007 +0200
13835 TQM5200: Call usb_cpu_init() during board init
13837 usb_cpu_init() configures GPS USB pins, clocks, etc. and
13838 is required for proper operation of kernel USB subsystem.
13839 This setup was previously done in the kernel by the fixup
13840 code which is being removed, thus low level init must be
13841 done by U-boot now.
13843 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
13844 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
13846 commit b5af773f8d92677e06f3295b45557c9d0a487c24
13847 Author: Zhang Wei <wei.zhang@freescale.com>
13848 Date: Thu Oct 25 17:51:27 2007 +0800
13850 Fix the issue of usb_kbd driver missing the scan code of key 'z'.
13852 The scan code of the key 'z' is 0x1d, which should be handled.
13854 The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
13857 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
13858 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
13860 commit 85ac988e86f9414fa645b0148dc66c3520a1eb84
13861 Author: Rodolfo Giometti <giometti@enneenne.com>
13862 Date: Mon Oct 15 11:59:17 2007 +0200
13864 PXA USB OHCI: "usb stop" implementation.
13866 Some USB keys need to be switched off before loading the kernel
13867 otherwise they can remain in an undefined status which prevents them
13868 to be correctly recognized by the kernel.
13870 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
13871 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
13873 commit 31548249decf18a6b877a18436b6139dd483fe4a
13874 Author: Justin Flammia <jflammia@savantav.com>
13875 Date: Mon Oct 29 17:40:35 2007 -0400
13879 This is a multi-part message in MIME format.
13881 commit e6e505eae94ed721e123e177489291fc4544b7b8
13882 Author: Justin Flammia <jflammia@savantav.com>
13883 Date: Mon Oct 29 17:19:03 2007 -0400
13885 Found a bug in the way the DHCP Request packet is built, where the IP address
13886 that is offered by the server is bound to prematurely. This patch is a fix of
13887 that bug where the IP address offered by the DHCP server is not used until
13888 after the DHCP ACK from the server is received.
13890 Signed-off-by: Justin Flammia <jflammia@savantav.com>
13891 Signed-off-by: Ben Warren <bwarren@qstreams.com>
13893 commit e8ee8f3ade2a06c1893dd5e68f223070d650c7ed
13894 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13895 Date: Thu Oct 25 17:16:22 2007 -0500
13897 ColdFire 54455: Fix correct boot location for atmel and intel
13899 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13901 commit 688e8eb414ac111cca7ce60bdf30e805ab9a7bcb
13902 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13903 Date: Thu Oct 25 17:14:00 2007 -0500
13905 ColdFire: Fix build error when CONFIG_WATCHDOG is defined
13907 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13909 commit c67e12e705b204cfe914e3e3e693d69a445dcabf
13910 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13911 Date: Thu Oct 25 17:12:36 2007 -0500
13913 ColdFire 5329: Assign correct SDRAM size and fix cache
13915 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13917 commit 95e9f2c212a65610b2e59a5c00d0113383a4da0b
13918 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13919 Date: Thu Oct 25 17:10:23 2007 -0500
13921 ColdFire 5253: Assign correct SDRAM size
13923 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13925 commit 2acefa72ee0026f862ab65597ca687428f63a973
13926 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13927 Date: Thu Oct 25 17:09:17 2007 -0500
13929 ColdFire 5282: Fix external flash boot and return dramsize
13931 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13933 commit d78791ae914d4e7c5edca1cdad73b3dc81a4eb82
13934 Author: Bartlomiej Sieka <tur@semihalf.com>
13935 Date: Thu Oct 25 17:20:01 2007 +0200
13937 TQM5200: increase kernel_addr_r and fdt_addr_r (hinted by Wolfgang Denk).
13939 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
13941 commit 1a0ce20aa4cb4e3068da04e7290ee9986fd0b834
13942 Author: Martin Krause <martin.krause@tqs.de>
13943 Date: Wed Oct 24 08:42:25 2007 +0200
13945 TQM5200: fix spurious characters on second serial interface
13947 With this patch PSC3 is configured as UART. This is done, because if
13948 the pins of PSC3 are not configured at all (-> all pins are GPI),
13949 due to crosstalk, spurious characters may be send over the RX232_2_TXD
13952 Signed-off-by: Martin Krause <martin.krause@tqs.de>
13953 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
13955 commit be4a87f11e297a5cededbf7dd71c0248f3874acd
13956 Author: Martin Krause <martin.krause@tqs.de>
13957 Date: Wed Oct 24 08:41:27 2007 +0200
13959 TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
13961 Some commands for the STK52xx base board try to access the SM501 grafic
13962 controller. But the TQM5200S has no grafic controller (only the TQM5200
13963 and the TQM5200B have). This patch deactivates the commands accessing
13964 the SM501 for the TQM5200S.
13966 Signed-off-by: Martin Krause <martin.krause@tqs.de>
13967 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
13969 commit b31f64343ead9482cd439b1adbe4c34026a641b1
13970 Author: Martin Krause <martin.krause@tqs.de>
13971 Date: Mon Oct 22 16:45:53 2007 +0200
13973 TQM5200: fix spurious characters on second serial interface
13975 With this patch PSC3 is configured as UART. This is done, because if
13976 the pins of PSC3 are not configured at all (-> all pins are GPI),
13977 due to crosstalk, spurious characters may be send over the RX232_2_TXD
13980 Signed-off-by: Martin Krause <martin.krause@tqs.de>
13982 commit 0fc0f91b20ffa802f5a66534ca5c2844910583f6
13983 Author: Martin Krause <martin.krause@tqs.de>
13984 Date: Mon Oct 22 16:40:06 2007 +0200
13986 TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
13988 Some commands for the STK52xx base board try to access the SM501 grafic
13989 controller. But the TQM5200S has no grafic controller (only the TQM5200
13990 and the TQM5200B have). This patch deactivates the commands accessing
13991 the SM501 for the TQM5200S.
13993 Signed-off-by: Martin Krause <martin.krause@tqs.de>
13995 commit 7b0a42219f30277f71f4405cbaf8a269f6d2d227
13996 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13997 Date: Sun Oct 21 09:14:28 2007 +0200
13999 Mips: Fix string functions differ prototype declaration
14001 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14003 commit cb8250fe4b3c4ed549b270e8a20bc22060e7e1d2
14004 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
14005 Date: Fri Oct 19 17:51:40 2007 -0500
14007 fsl_pci_init enable COMMAND_MEMORY if inbound window
14009 Patch 16e23c3f removed PCSRBAR allocation. But passing zero windows
14010 to pciauto_setup_device has the side effect of not getting
14011 COMMAND_MEMORY set.
14013 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
14015 commit e9d0d527992566ebef9826962ff1745b2f082b92
14016 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14017 Date: Fri Oct 19 10:55:24 2007 +0200
14019 delta: Fix OHCI_REGS_BASE undeclared and wait_ms implicit declaration
14021 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14023 commit 9c4884f54da982ce990c7d1760ac81b0704d3c64
14024 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14025 Date: Fri Oct 19 08:10:15 2007 +0200
14027 fix warning: no return statement in function returning non-void
14029 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14031 commit e78220f6e514206757acfe247297fc9a328a881f
14032 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14033 Date: Fri Oct 19 06:33:45 2007 +0200
14035 xsengine: Fix no partition type specified, use DOS as default
14037 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14039 commit 10cdb8dbd67a818823ab9ec88b68fc348903db59
14040 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14041 Date: Fri Oct 19 00:24:59 2007 +0200
14043 lubbock: Fix no partition type specified, use DOS as default
14045 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14047 commit 41b4d282d38fa7231c315c5f6cfff5bdd24e0191
14048 Author: Wolfgang Denk <wd@denx.de>
14049 Date: Tue Oct 23 16:50:03 2007 +0200
14051 Coding style: keep lists sorted; update CHANGELOG
14053 Signed-off-by: Wolfgang Denk <wd@denx.de>
14055 commit 58b74b05c621e2835ecf4e2d3243042cf4186777
14056 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14057 Date: Fri Oct 19 00:09:05 2007 +0200
14059 Fix missing drivers makefile entries ds1722.c mw_eeprom.c
14061 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14063 commit 96455bfebc9887837095c9051d216f53c61b5f10
14064 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14065 Date: Fri Oct 19 00:07:39 2007 +0200
14067 Fix warning differ in signedness in board/innokom/innokom.c
14069 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14071 commit 2a4741d9a14ec475f50e9856d2c0a67e8b4271bd
14072 Author: Marcel Ziswiler <marcel@ziswiler.com>
14073 Date: Fri Oct 19 00:25:33 2007 +0200
14075 fix pxa255_idp board
14077 The pxa255_idp being an old unmaintained board showed several issues:
14078 1. CONFIG_INIT_CRITICAL was still defined.
14079 2. Neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION was defined.
14080 3. Symbol flash_addr was undeclared.
14081 4. The boards lowlevel_init function was still called memsetup.
14082 5. The TEXT_BASE was still 0xa3000000 rather than 0xa3080000.
14083 6. Using -march=armv5 instead of -march=armv5te resulted in lots of
14084 'target CPU does not support interworking' warnings on recent compilers.
14085 7. The PXA's serial driver redefined FFUART, BTUART and STUART used as
14086 indexes rather than the register definitions from the pxa-regs header
14087 file. Renamed them to FFUART_INDEX, BTUART_INDEX and STUART_INDEX to
14088 avoid any ambiguities.
14089 8. There were several redefinition warnings concerning ICMR, OSMR3,
14090 OSCR, OWER, OIER, RCSR and CCCR in the PXA's assembly start file.
14091 9. The board configuration file was rather outdated.
14092 10. The part header file defined the vendor, product and revision arrays
14093 as unsigned chars instead of just chars in the block_dev_desc_t
14096 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
14098 commit 298cd4cafe81ff8a6c87be8fbc440a20720d3ed6
14099 Author: Rune Torgersen <runet@innovsys.com>
14100 Date: Wed Oct 17 11:56:31 2007 -0500
14102 Make MPC8266ADS command selection more robust
14104 Fix MPC8266 command line definition so it won't break when new commands
14105 are added to u-boot.
14106 Signed-off-by Rune Torgersen <runet@innovsys.com>
14108 commit d3afa1ee19345a31fd1eaad3e98b97d13ca47315
14109 Author: Bartlomiej Sieka <tur@semihalf.com>
14110 Date: Tue Oct 23 13:14:10 2007 +0200
14112 Motion-PRO: Update configuration to accomodate next generation board.
14114 New board has faster oscillator and a different Flash chip. This affects:
14115 - CFG_MPC5XXX_CLKIN
14117 - Flash CS configuration (timings)
14118 - Flash sector size, and thus MTD partition layout
14119 - malloc() arena size (due to bigger Flash sectors)
14120 - smaller memory test range (due to bigger malloc() arena)
14122 This patch also enables more extensive memory testing via "mtest".
14124 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
14126 commit eff501904df2bf1724a750062628ba2c51dbb1f8
14127 Author: Bartlomiej Sieka <tur@semihalf.com>
14128 Date: Tue Oct 23 11:36:07 2007 +0200
14130 Motion-PRO: Add setting of SDelay reg. to SDRAM controller configuration.
14132 Per AN3221 (MPC5200B SDRAM Initialization and Configuration), the SDelay
14133 register must be written a value of 0x00000004 as the first step of the
14134 SDRAM contorller configuration.
14136 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
14138 commit 7a9348728ebda63cdbaacffd83099aa71d9d4c54
14139 Author: Peter Pearse <peter.pearse@arm.com>
14140 Date: Tue Oct 23 10:22:16 2007 +0100
14142 Move PL01* serial drivers to drivers/serial and adjust Makefiles.
14144 commit 20d500d531a6b971ce6cc1bf191cb0092cdc0afc
14145 Author: Stefan Roese <sr@denx.de>
14146 Date: Tue Oct 23 10:17:42 2007 +0200
14148 ppc4xx: lwmon5: Some further GPIO config changes
14150 Signed-off-by: Stefan Roese <sr@denx.de>
14152 commit de9a738faa7c2f47286119c3bfebc3dfbfe7d86d
14153 Author: Vlad Lungu <vlad@comsys.ro>
14154 Date: Sun Oct 21 22:10:10 2007 +0900
14156 [MIPS] Fix UNCACHED_SDRAM
14158 PHYSADDR is for physical address, KSEG1ADDR is for uncached.
14160 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
14161 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
14163 commit 00101dd7a32d12f698150123e47e4b3420279f86
14164 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
14165 Date: Sun Oct 21 21:30:42 2007 +0900
14167 [MIPS] Add PIC-related switches to PLATFORM_{CPP,LD}FLAGS and cleanup
14169 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
14171 commit eb700636db017d310edaeb559b13d82588560674
14172 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
14173 Date: Sun Oct 21 10:55:37 2007 +0900
14175 [MIPS] u-boot.lds: Define _gp in a standard manner
14177 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
14179 commit 22069215eb7adf5a3888bf7c7784ea9d70a72cd0
14180 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
14181 Date: Sun Oct 21 10:55:36 2007 +0900
14183 [MIPS] Fix $gp usage
14185 Now we load $gp with _GLOBAL_OFFSET_TABLE_, but this is incorrect use.
14186 As a general principle, we should use _gp for $gp.
14188 Thanks to linker script's help we fortunately have _gp which equals to
14189 _GLOBAL_OFFSET_TABLE_. But once _gp gets out of alignment, we will not
14190 be able to access to GOT entires, global variables and procedure entry
14191 points. The right thing to do is to use _gp.
14193 This patch also introduce a new symbol `.gpword _GLOBAL_OFFSET_TABLE_'
14194 which holds the offset from _gp. When updating GOT entries, we use this
14195 offset and _gp to calculate the final _GLOBAL_OFFSET_TABLE_.
14197 This patch is originally submitted by Vlad Lungu <vlad@comsys.ro>, then
14198 I made some change to leave over num_got_entries.
14200 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
14201 Cc: Vlad Lungu <vlad@comsys.ro>
14203 commit cbf2323b5b8285ea01acba7bbb905a3162d9b021
14204 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
14205 Date: Sun Oct 21 10:55:36 2007 +0900
14207 [MIPS] u-boot.lds: Fix __got_start and __got_end
14209 Ensure that __got_start points to top of the `.got', and __got_end points
14210 to bottom as well, so that we never fail to count num_got_entries.
14212 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
14214 commit e5f325fec5b48ae705c89522923ba5a2e37cd5c7
14215 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
14216 Date: Sun Oct 21 10:55:36 2007 +0900
14218 [MIPS] u-boot.lds: Remove duplicated .sdata section
14220 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
14222 commit 05bf4919c1ce49cdedadacd564d0786a8ed796a1
14223 Author: Wolfgang Denk <wd@denx.de>
14224 Date: Sun Oct 21 01:01:17 2007 +0200
14226 Minor coding style cleanup; update CHANGELOG
14228 Signed-off-by: Wolfgang Denk <wd@denx.de>
14230 commit ff285ca07eda1ea4a8909848cc1cc604ec8fec9c
14231 Author: Vlad Lungu <vlad@comsys.ro>
14232 Date: Thu Oct 4 20:47:10 2007 +0300
14236 Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try
14237 to do anything in eth_stop() if eth_init() was not called.
14238 Simplified RX path in order to avoid timeouts on really really
14239 fast NE2000 cards (read: qemu with internal tftp), NetLoop() is
14240 clever enough to cope with 1 packet per eth_rx().
14242 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
14244 commit df90968b48fb34fa9072fab150db2ac89678f537
14245 Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
14246 Date: Mon Sep 24 13:32:13 2007 -0400
14248 Setting MSR[DE] in do_reset
14251 This patch ensures the soft reset of the board for the 85xx boards
14252 by setting the MSR[DE] in the do_reset function.
14254 Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
14256 commit 1e701e701304b3c3a3768ca83dd2ab7b9e88c77d
14257 Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
14258 Date: Mon Sep 24 13:36:01 2007 -0400
14263 This patch fixes the MSR overwrite in the start.S when moving out of
14266 Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
14268 commit 5c7ea64bb74a850a2b2303f853a8270695ad8602
14269 Author: Dan Wilson <dwilson@fulcrummicro.com>
14270 Date: Fri Oct 19 11:33:48 2007 -0500
14272 tsec driver should clear RHALT on startup
14274 This was causing problems for some people.
14276 Signed-off-by: Alain Gravel <agravel@fulcrummicro.com>
14277 Signed-off-by: Dan Wilson <dwilson@fulcrummicro.com>
14278 Signed-off-by: Andy Fleming <afleming@freescale.com>
14280 commit 7600d47b8f6a10019e537dc9a62aa1498df58d25
14281 Author: Kumar Gala <galak@kernel.crashing.org>
14282 Date: Thu Oct 11 00:29:18 2007 -0500
14284 Improve handling of PCI interrupt device tree fixup on MPC85xx CDS
14286 On the MPC85xx CDS we have two issues:
14288 1. The device tree fixup code did not check to see if the property we are
14289 trying to update is actually found. Its possible that it would update
14290 random memory starting at 0.
14292 2. Newer Linux kernel's have moved the location of the PCI nodes to be
14293 sibilings of the soc node and not children. The explicit PATH to the PCI
14294 node would not be found for these device trees. Add the ability to handle
14295 both paths. In the future we shouldn't handle such fixups by explicit path.
14297 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14299 commit a3063eec775719b7e91023bbec3f64b3118791df
14300 Author: Kumar Gala <galak@kernel.crashing.org>
14301 Date: Thu Oct 11 00:18:48 2007 -0500
14303 Set OF_STDOUT_PATH to match the default console on MPC8568 MDS
14305 On the MPC8568 MDS we use ttyS0, UART0, etc. as the standard configured
14306 console. Make it so we match that config what we tell Linux as the early
14309 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14311 commit e1ce3cb617bb06f91f82f98915391175addf3e82
14312 Author: Kumar Gala <galak@kernel.crashing.org>
14313 Date: Tue Oct 2 11:12:27 2007 -0500
14315 Remove magic numbers from cache related operations for mpc85xx
14317 The mpc85xx start code uses some magic numbers that we actually
14318 have #defines for in <config.h> so use those instead.
14320 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14322 commit 5441f61a3d8b7034f19fc1361183e936198e6dbb
14323 Author: Detlev Zundel <dzu@denx.de>
14324 Date: Fri Oct 19 16:47:26 2007 +0200
14328 Signed-off-by: Detlev Zundel <dzu@denx.de>
14330 commit 281df457c1aa50d2752165d0c5c3282d4027b974
14331 Author: Tony Li <tony.li@freescale.com>
14332 Date: Thu Oct 18 17:47:19 2007 +0800
14334 mpc83xx: Add configure entry for MPC83xx ATM support
14336 Add MPC8360EMDS_ATM_config and MPC832XEMDS_ATM_config into
14337 Makfile and MAKEALL
14339 Signed-off-by: Tony Li <tony.li@freescale.com>
14340 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14342 commit d2646554f529a9577515eceb0ec5eceee18244ba
14343 Author: Tony Li <tony.li@freescale.com>
14344 Date: Thu Oct 18 17:44:38 2007 +0800
14346 mpc83xx: pq-mds-pib.c typo error
14348 Correct to val8 from val.
14350 Signed-off-by: Tony Li <tony.li@freescale.com>
14351 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14353 commit 3e11ae80fec1ee12194940955431186abf6009c2
14354 Author: Stefan Roese <sr@denx.de>
14355 Date: Wed Oct 17 15:40:19 2007 +0200
14357 ppc4xx: Add 667/133 (CPU/PLB) frequency setup to Sequoia bootstrap command
14359 Signed-off-by: Stefan Roese <sr@denx.de>
14361 commit 3c89d75409eb26639d36dfa11d4ee3d8b962dc3c
14362 Author: Jon Loeliger <jdl@freescale.com>
14363 Date: Tue Oct 16 15:27:43 2007 -0500
14365 Initial mpc8610hpcd Makefile files.
14367 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
14368 Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
14369 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
14370 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14372 commit 9553df86d3a319c3a1a7cde7e4edd6eeb5aa64c7
14373 Author: Jon Loeliger <jdl@freescale.com>
14374 Date: Tue Oct 16 15:26:51 2007 -0500
14376 Initial mpc8610hpcd cpu/, README and include/ files.
14378 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
14379 Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
14380 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
14381 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14383 commit 3dd2db53ceb0dff80f25c2a07f83f29b907b403e
14384 Author: Jon Loeliger <jdl@freescale.com>
14385 Date: Tue Oct 16 13:54:01 2007 -0500
14387 Initial mpc8610hpcd board files.
14389 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
14390 Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
14391 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
14392 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14394 commit 7ee6ba1a056e4061ab4cfde30127e332e7957afd
14395 Author: runet@innovsys.com <runet@innovsys.com>
14396 Date: Tue Oct 16 14:50:40 2007 -0500
14398 Make MPC8266ADS board compile again.
14400 Signed-off-by: Runet Torgersen <runet@innovsys.com>
14402 commit 2491167c245d8ebe6f2dbd8c4287aaa0d14fe93a
14403 Author: Jon Loeliger <jdl@freescale.com>
14404 Date: Mon Aug 27 12:41:03 2007 -0500
14406 86xx: Allow for fewer DDR slots per memory controller.
14408 As a direct correlation exists between DDR DIMM slots
14409 and SPD EEPROM addresses used to configure them, use
14410 the individually defined SPD_EEPROM_ADDRESS* values to
14411 determine if a DDR DIMM slot should have its SPD
14412 configuration read or not.
14414 Effectively, this now allows for 1 or 2 DIMM slots
14415 per memory controller.
14417 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14419 commit 4d4a945e189a2f384c66432316da2788a0ac1607
14420 Author: Rodolfo Giometti <giometti@enneenne.com>
14421 Date: Mon Oct 15 11:59:17 2007 +0200
14423 PXA USB OHCI: "usb stop" implementation.
14425 Some USB keys need to be switched off before loading the kernel
14426 otherwise they can remain in an undefined status which prevents them
14427 to be correctly recognized by the kernel.
14429 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
14431 commit e2e93442e558cf1500e92861f99713b2f045ea22
14432 Author: Stefan Roese <sr@denx.de>
14433 Date: Mon Oct 15 11:39:00 2007 +0200
14435 ppc4xx: Fix bug in I2C bootstrap values for Sequoia/Rainier
14437 The I2C bootstrap values that can be setup via the "bootstrap" command,
14438 were setup incorrect regarding the generation of the internal sync PCI
14439 clock. The values for PLB clock == 133MHz were slighly incorrect and the
14440 values for PLB clock == 166MHz were totally incorrect. This could
14441 lead to a hangup upon booting while PCI configuration scan.
14443 This patch fixes this issue and configures valid PCI divisor values
14444 for the sync PCI clock, with respect to the provided external async
14447 Here the values of the formula in the chapter 14.2 "PCI clocking"
14448 from the 440EPx users manual:
14450 AsyncPCICLK - 1MHz <= SyncPCIClk <= (2 * AsyncPCIClk) - 1MHz
14452 33MHz async PCI frequency:
14454 => 32 <= 44.3 <= 65 (div = 3)
14457 => 32 <= 55.3 <= 65 (div = 3)
14459 66MHz async PCI frequency:
14461 => 65 <= 66.5 <= 132 (div = 2)
14464 => 65 <= 83 <= 132 (div = 2)
14466 Signed-off-by: Stefan Roese <sr@denx.de>
14468 commit 5a5958b7de70ae99f0e7cbd5c97ec1346e051587
14469 Author: Stefan Roese <sr@denx.de>
14470 Date: Mon Oct 15 11:29:33 2007 +0200
14472 ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & Yosemite
14474 The BCSR status bit for the 66MHz PCI operation was correctly
14475 addressed (MSB/LSB problem). Now the correct currently setup
14476 PCI frequency is displayed upon bootup.
14478 This patch also fixes this problem on Rainier & Yellowstone, since these
14479 boards use the same souce code as Sequoia & Yosemite do.
14481 Signed-off-by: Stefan Roese <sr@denx.de>
14483 commit da3aad55cbde80ab6e301aafa82a2c411aa53eff
14484 Author: Martin Krause <martin.krause@tqs.de>
14485 Date: Wed Sep 26 17:55:56 2007 +0200
14487 TQM860M: adjust for doubled flash sector size.
14489 Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
14490 doubled sector size.
14492 Signed-off-by: Martin Krause <martin.krause@tqs.de>
14494 commit 9d29250e2e62f4bf20c7a20b4173d84c48f11f5d
14495 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
14496 Date: Wed Sep 26 17:55:54 2007 +0200
14498 TQM8xx: Fix CAN timing.
14500 Signed-off-by: Martin Krause <martin.krause@tqs.de>
14502 commit d43e489baf02afae49077791fb22332d240d8656
14503 Author: Martin Krause <martin.krause@tqs.de>
14504 Date: Thu Sep 27 14:54:36 2007 +0200
14506 TQM866M: fix SDRAM refresh
14508 At 133 MHz the current SDRAM refresh rate is too fast
14509 (measured 4 * 1.17 us).
14510 CFG_MAMR_PTA changes from 39 to 97. This result
14511 in a refresh rate of 4 * 7.8 us at the default clock
14512 50 MHz. At 133 MHz the value will be then 4 * 2.9 us.
14513 This is a compromise until a new method is found to
14514 adjust the refresh rate.
14516 Signed-off-by: Martin Krause <martin.krause@tqs.de>
14518 commit 9ef57bbee1c67cc01da2026c242c4692db32be36
14519 Author: Martin Krause <martin.krause@tqs.de>
14520 Date: Wed Sep 26 17:55:55 2007 +0200
14522 TQM866M: adjust for doubled flash sector size.
14524 Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
14525 doubled sector size.
14527 Signed-off-by: Martin Krause <martin.krause@tqs.de>
14529 commit f8bf90461d9bad2e6fed31fcebaf235f60dd6763
14530 Author: Michal Simek <monstr@monstr.eu>
14531 Date: Sun Oct 14 16:12:29 2007 +0200
14533 [FIX] XUPV2P change command handling
14534 and remove code violation
14536 commit 636400198228d96983c06657b17f760f5989958e
14537 Author: Wolfgang Denk <wd@denx.de>
14538 Date: Sun Oct 14 00:13:19 2007 +0200
14540 Prepare for 1.3.0-rc3 release
14542 Signed-off-by: Wolfgang Denk <wd@denx.de>
14544 commit 68f14f77ca5fe5f9cc025c8cae101671f628309f
14545 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14546 Date: Sat Sep 29 13:41:37 2007 +0200
14548 Fix warning differ in signedness in cpu/pxa/mmc.c
14550 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14552 commit fc19e36f741e8bc727c0a330170b3b5db90399ef
14553 Author: Wolfgang Denk <wd@denx.de>
14554 Date: Sat Oct 13 23:51:14 2007 +0200
14556 Fix warning differ in signedness in board/mpl/vcma9/vcma9.c
14558 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14559 Signed-off-by: Wolfgang Denk <wd@denx.de>
14561 commit de74b9eeacccaf0a42e5ecc9ae79a88f7a311296
14562 Author: Wolfgang Denk <wd@denx.de>
14563 Date: Sat Oct 13 21:15:39 2007 +0200
14565 Coding Style cleanup.
14567 Signed-off-by: Wolfgang Denk <wd@denx.de>
14569 commit e1893815b0999410d7a327589611c7b38e95299e
14570 Author: Wolfgang Denk <wd@denx.de>
14571 Date: Fri Oct 12 15:49:39 2007 +0200
14573 GP3 SSA: enable RTC
14575 Signed-off-by: Wolfgang Denk <wd@denx.de>
14577 commit 8002012041f1ff9f997a5727abe5015f70cd2e46
14578 Author: Grzegorz Bernacki <gjb@semihalf.com>
14579 Date: Tue Oct 9 13:58:24 2007 +0200
14581 [ads5121] EEPROM support added.
14583 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
14585 commit 7b624ad254b97e5a25dca2304a398b64aeedaffe
14586 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
14587 Date: Sat Oct 6 18:55:35 2007 +0200
14589 AVR32: Initialize bi_flash* in board_init_r
14591 The ATSTK1000-specific flash driver intializes bi_flashstart,
14592 bi_flashsize and bi_flashoffset, but other flash drivers, like the CFI
14595 Initialize these in board_init_r instead so that things will still be
14596 set up correctly when we switch to the CFI driver.
14598 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
14600 commit 2b2a587d6d3076387d22ac740f44044bf46e2cb8
14601 Author: Marian Balakowicz <m8@semihalf.com>
14602 Date: Fri Oct 5 10:40:54 2007 +0200
14604 tqm5200: Fix CONFIG_CMD_PCI typo in board config file.
14606 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
14608 commit 92869195ef8210758d2176230c0a36897afd50ed
14609 Author: Bartlomiej Sieka <tur@semihalf.com>
14610 Date: Fri Oct 5 09:46:06 2007 +0200
14612 CM5200: Fix missing null-termination in hostname manipulation code
14614 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
14616 commit 9add9884b1fddc34ca186e00a2f868ccd5d02d87
14617 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
14618 Date: Tue Oct 2 19:09:01 2007 +0200
14620 Fix memtest breakage
14622 CFG_MEMTEST_START uses weird magic involving gd, which fails to
14623 compile. Use hardcoded values instead (we actually know how much RAM
14626 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
14628 commit 738815c0cc44aa329097f868dc1efc49ede9c5ba
14629 Author: Stefan Roese <sr@denx.de>
14630 Date: Tue Oct 2 11:44:46 2007 +0200
14632 ppc4xx: Coding style cleanup
14634 Signed-off-by: Stefan Roese <sr@denx.de>
14636 commit 87c1833a39e944db66385286fd5e28f9b3fcdd50
14637 Author: Stefan Roese <sr@denx.de>
14638 Date: Tue Oct 2 11:44:19 2007 +0200
14640 ppc4xx: lwmon5: Remove watchdog for now, since not fully tested yet
14642 Signed-off-by: Stefan Roese <sr@denx.de>
14644 commit 2db64784061bfc34f4ba70ef1d2fbe7133b55670
14645 Author: Grzegorz Bernacki <gjb@semihalf.com>
14646 Date: Mon Oct 1 09:51:50 2007 +0200
14648 Program EPLD to force full duplex mode for PHY.
14650 EPLD forces modes of PHY operation. By default full duplex is turned off.
14651 This fix turns it on.
14653 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
14655 commit 785c13477b77dcd2e6c5128fffcdb4e1943f4818
14656 Author: Timo Ketola <timo.ketola@exertus.fi>
14657 Date: Mon Sep 24 14:50:32 2007 +0300
14659 Bugfix: Use only one PTD for one endpoint
14661 Original isp116x-hcd code prepared multiple PTDs for longer than 16
14662 byte transfers for one endpoint. That is unnecessary because the
14663 ISP116x is able to split long data from one PTD into multiple
14664 transactions based on the buffer size of the endpoint. It also caused
14665 serious problems if the endpoint NAKed some of the transactions. In
14666 that case ISP116x wouldn't notice that the other PTDs were for the same
14667 endpoint and would try the other PTDs possibly out of order. That would
14668 break the whole transfer.
14670 This patch makes isp116x_submit_job to use one PTD for one transfer.
14672 Signed-off-by: Timo Ketola <timo.ketola@exertus.fi>
14673 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
14675 commit 86ec86c04326c3913178a7679aa910de071da75d
14676 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14677 Date: Thu Sep 27 23:27:47 2007 +0200
14679 Fix missing DECLARE_GLOBAL_DATA_PTR on CONFIG_LPC2292 in serial
14681 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14683 commit 3e954beb614b5b190d7f4f4c3b641437a0132e35
14684 Author: Stefan Roese <sr@denx.de>
14685 Date: Tue Sep 11 14:12:55 2007 +0200
14687 ppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test)
14689 Signed-off-by: Stefan Roese <sr@denx.de>
14691 commit 1487adbdcf9594bb2eb686325a6f9540dad1b70a
14692 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
14693 Date: Wed Sep 26 16:35:54 2007 -0500
14695 85xx io out functions need sync after write.
14697 This fixes the mc146818 rtc_read/write functions for 85xx.
14699 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
14701 commit 0d38effc6e359e6b1b0c78d66e8bc1a4dc15a2ae
14702 Author: Grant Likely <grant.likely@secretlab.ca>
14703 Date: Tue Sep 25 15:48:05 2007 -0600
14705 Fpga: fix incorrect test of CFG_FPGA_XILINX macro
14707 CFG_FPGA_XILINX is a bit value used to test against the value in
14708 CONFIG_FPGA. Testing for a value will always return TRUE. I don't
14709 think that is the intention in this code.
14711 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14713 commit 853643d8cf2ca80cb2e25c53ad5dc580abafe166
14714 Author: Michal Simek <monstr@monstr.eu>
14715 Date: Mon Sep 24 00:41:30 2007 +0200
14717 [FIX] change command handling and removing code violation
14719 commit f240356507038e5ce55e8a24cb2607e9eae6d10c
14720 Author: Michal Simek <monstr@monstr.eu>
14721 Date: Mon Sep 24 00:36:06 2007 +0200
14723 [FIX] change sets of commands
14724 because changing of command handling brings
14725 compilation problems
14727 commit cb1bc63b75a232571eb69aa2c8aa919321655845
14728 Author: Michal Simek <monstr@monstr.eu>
14729 Date: Mon Sep 24 00:30:42 2007 +0200
14731 [FIX] Email reparation & Copyright
14732 Both codes are written by myself without any
14735 commit 0731cbae6c2feab93b244d83fd6a43f5cc9bf852
14736 Author: Michal Simek <monstr@monstr.eu>
14737 Date: Mon Sep 24 00:25:11 2007 +0200
14739 [PATCH] Change macro name for UartLite
14740 because PowerPC 405 can use UartLite as console
14742 commit 1c1100d2fcf46b9d11dcf78d6e5aea75e2e8b716
14743 Author: Michal Simek <monstr@monstr.eu>
14744 Date: Mon Sep 24 00:21:19 2007 +0200
14746 [PATCH] Add support for design without interrupt controller
14749 commit 0731933ec8ec45d02ba89b52df673d526873cdde
14750 Author: Michal Simek <monstr@monstr.eu>
14751 Date: Mon Sep 24 00:19:48 2007 +0200
14753 [FIX] resolve problem with cpu without barrel shifter
14755 commit db14d77995ce515b728b178b63f82babe60e3d56
14756 Author: Michal Simek <monstr@monstr.eu>
14757 Date: Mon Sep 24 00:18:46 2007 +0200
14759 [FIX] repair email address
14761 commit 481d4328618804add1f818a6c96296121cd0528e
14762 Author: Michal Simek <monstr@monstr.eu>
14763 Date: Mon Sep 24 00:17:42 2007 +0200
14765 [FIX] repair MFSL commands
14767 commit b90c045f035c3cc9b5d2edaed6048dfb74e40763
14768 Author: Michal Simek <monstr@monstr.eu>
14769 Date: Mon Sep 24 00:08:37 2007 +0200
14771 synchronizition with mainline
14773 commit eda3e1e6619ad0bee94ae4b16c99d88e77e2af13
14774 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14775 Date: Sun Sep 23 02:42:38 2007 +0900
14777 sh: Add support command of ide with sh
14779 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14781 commit d91ea45d15cf8e0987456bd211ffbb650824b6f1
14782 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14783 Date: Sun Sep 23 02:38:42 2007 +0900
14785 sh: Update Makefile
14787 Add support MS7722SE01 to Makefile.
14789 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14791 commit 6c0bbdccd379f5c8702af9e0765294c2fb7472a6
14792 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14793 Date: Sun Sep 23 02:31:13 2007 +0900
14795 sh: Add support Renesas sh7722 processor and Hitachi MS7722SE01 board
14797 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14799 commit 047375bfa4c3052fa50a748da7ff89e9dad3b364
14800 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14801 Date: Sun Sep 23 02:19:24 2007 +0900
14803 sh: Update MS7750SE01 platform
14805 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14807 commit 516ad760db3553766267ada01b7d5d727faa4bbd
14808 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14809 Date: Sun Sep 23 02:17:08 2007 +0900
14811 sh: Remove comment out code from include/asm-sh/cpu_sh4.h
14813 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14815 commit b02bad128669e567fce87d8df823b06a0144b8db
14816 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14817 Date: Sun Sep 23 02:12:30 2007 +0900
14819 sh: Update core code of SuperH.
14821 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14823 commit 66dcad3a9a53e0766d90e0084123bd8529522fb0
14824 Author: Wolfgang Denk <wd@denx.de>
14825 Date: Thu Sep 20 00:04:14 2007 +0200
14829 Signed-off-by: Wolfgang Denk <wd@denx.de>
14831 commit 135e19bc2773ebca487e9a8371f67e1ba202313a
14832 Author: Wolfgang Denk <wd@denx.de>
14833 Date: Tue Sep 18 21:36:35 2007 +0200
14835 Avoid compiler warning.
14837 Signed-off-by: Wolfgang Denk <wd@denx.de>
14839 commit 8a783a65851bc7421ab69f442261215e21b8891a
14840 Author: Grant Likely <grant.likely@secretlab.ca>
14841 Date: Tue Sep 18 12:24:57 2007 -0600
14843 Bugfix: remove embedded null (\0) from CFG_BOOTFILE macro in TQM8540_config
14845 /bin/bash and /bin/dash (which /bin/sh is linked to on ubuntu) handle embedded
14846 nulls in a string differently. For example, the following statement:
14847 echo "this is a string\0" > afile
14848 Will produce the following with /bin/bash:
14849 "this is a string\0"
14850 But with /bin/dash, will produce:
14853 Bug fixed by moving the embedded null out of the makefile and into the
14854 config header. Also renamed the macro to avoid usage colision with the same
14855 macro used by other board ports.
14857 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14859 commit f8d3ca7b6fa322ac57e8e831f07dbeea039a9f35
14860 Author: Wolfgang Denk <wd@denx.de>
14861 Date: Tue Sep 18 17:40:27 2007 +0200
14863 MCC200: fix build warning
14865 The MCC200 board config file includes version.h for some customer-
14866 specific setting, which causes warnings with "make depend"; build
14867 version.h before depend.
14869 Signed-off-by: Wolfgang Denk <wd@denx.de>
14871 commit bd86220f58b99d6896198c385fda132f0c980915
14872 Author: Peter Pearse <peter.pearse@arm.com>
14873 Date: Tue Sep 18 13:07:54 2007 +0100
14875 Move coloured led API to status_led.h
14876 Improve indentation in drivers/at45.c
14878 commit e80e585b00fbbab7ad1bf71619741f2c5b029ab7
14879 Author: Eirik Aanonsen <eaa@wprmedical.com>
14880 Date: Tue Sep 18 08:47:20 2007 +0200
14882 Update atstk1002 bootargs.
14884 Updates to atstk1002 U-Boot header file:
14885 - Changed bootargs:
14886 * Set the bootargs for at1002 to point to the SD-card partition instead
14887 * ... of the boot flash.
14888 * Removing the rootfstype since that argument are not needed.
14890 Signed-off-by: Eirik Aanonsen <eaa@wprmedical.com>
14891 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
14893 commit a4f3aab6dfbed6c29367c688bfb8a47eef62c225
14894 Author: Eirik Aanonsen <eaa@wprmedical.com>
14895 Date: Wed Sep 12 13:32:37 2007 +0200
14897 Add some comments to clocks in atstk1002.h
14899 This patch applies some clarifying comments to how the different
14900 clocks are setup according to atstk1002.h Some of the previous
14901 comments where stating wrongful information.
14903 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
14905 commit 97213f32416ead885deafea86774e912ffd60ad0
14906 Author: David Saada <David.Saada@ecitele.com>
14907 Date: Mon Sep 17 17:04:47 2007 +0200
14909 Description: Add NEC's PCI OHCI module ID to the USB OHCI driver
14911 Signed-off-by: David Saada <david.saada@ecitele.com>
14913 commit 30363e98fa470fbecea5e8bc0f1443352754f303
14914 Author: Stefan Roese <sr@denx.de>
14915 Date: Mon Sep 17 08:20:47 2007 +0200
14917 Small whitespace cleanup of OneNAND patch
14919 Signed-off-by: Stefan Roese <sr@denx.de>
14921 commit d7e8ce101a4a45ed6ed45739fc2de5f87b13f7f1
14922 Author: Kyungmin Park <kmpark@infradead.org>
14923 Date: Mon Sep 10 17:15:14 2007 +0900
14925 OneNAND support (take #2)
14927 [PATCH 3/3] OneNAND support (take #2)
14929 OneNAND support at U-Boot
14931 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
14933 commit 17aa2800457df0c06b41516f46f126712c196219
14934 Author: Kyungmin Park <kmpark@infradead.org>
14935 Date: Mon Sep 10 17:14:34 2007 +0900
14937 OneNAND support (take #2)
14939 [PATCH 2/3] OneNAND support (take #2)
14941 OneNAND support at U-Boot
14943 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
14945 commit 916527f4809a7bcd811f1f1daf34af184e31dd8c
14946 Author: Kyungmin Park <kmpark@infradead.org>
14947 Date: Mon Sep 10 17:13:49 2007 +0900
14949 OneNAND support (take #2)
14951 [PATCH 1/3] OneNAND support (take #2)
14953 OneNAND support at U-Boot
14955 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
14957 commit b49c90df6e7cfcfb8b862b8bbf8448dff5eed9a5
14958 Author: Michal Simek <monstr@monstr.eu>
14959 Date: Sun Sep 16 20:51:57 2007 +0200
14961 [FIX] remove files form repository
14963 commit 67c31036acaaaa992fc346cc89db0909a7e733c4
14964 Author: Wolfgang Denk <wd@denx.de>
14965 Date: Sun Sep 16 17:10:04 2007 +0200
14967 TQM8xx[LM]: Fix broken environment alignment.
14969 With recent toolchains, the environment sectors were no longer aligned to
14970 sector boundaries. The reason was a combination of two bugs:
14972 1) common/environment.c assumed that CONFIG_TQM8xxL would be defined
14973 for all TQM8xxL and TQM8xxM boards. But "include/common.h", where
14974 this gets defined, is not included here (and cannot be included
14975 without causing lots of problems).
14977 Added a new #define CFG_USE_PPCENV for all boards which really
14978 want to put the environment is a ".ppcenv" section.
14980 2) The linker scripts just include environment.o, silently assuming
14981 that the objects in that file are really in the order in which
14982 they are coded in the C file, i. e. "environment" first, then
14983 "redundand_environment", and "env_size" last. However, current
14984 toolchains (GCC-4.x) reorder the objects, causing the environment
14985 data not to start on a flash sector boundary:
14987 Instead of: we got:
14989 40008000 T environment 40008000 T env_size
14990 4000c000 T redundand_environment 40008004 T redundand_environment
14991 40010000 T env_size 4000c004 T environment
14993 Note: this patch fixes just the first part, and cures the alignment
14994 problem by making sure that "env_size" gets placed correctly. However,
14995 we still have a potential issue because primary and redundant
14996 environment sectors are actually swapped, i. e. we have now:
14998 40008000 T redundand_environment
14999 4000c000 T environment
15000 40010000 T env_size
15002 This shall be fixed in the next version.
15004 Signed-off-by: Wolfgang Denk <wd@denx.de>
15006 commit eb6da8050797c204c9d010548424186c7ce32fc1
15007 Author: Wolfgang Denk <wd@denx.de>
15008 Date: Sun Sep 16 02:39:35 2007 +0200
15010 TQM8xx/FPS8xx: adjust flash partitions for 2.6 ARCH=powerpc kernels
15012 Signed-off-by: Wolfgang Denk <wd@denx.de>
15014 commit cd2d1602c54cc6957bdef3872272a4b264893960
15015 Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
15016 Date: Mon Sep 10 14:54:56 2007 -0400
15020 Fixup for the break statement in wrong place.
15022 [Patch by urwithsughosh@gmail.com]
15023 Acked-by: Andy Fleming <afleming@freescale.com>
15024 Signed-off-by: Wolfgang Denk <wd@denx.de>
15026 commit 5bd7fe9aeb76906371f40b8fd07613f10922e3e7
15027 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15028 Date: Tue Sep 11 17:04:00 2007 +0200
15030 Fix do_div() usage in nand process output
15032 Fix usage of do_div() in nand erase|read|write process output.
15034 The last patch to nand_util.c introduced do_div() instead of libgcc's
15035 implementation. But do_div() returns the quotient in its first
15036 macro parameter and not as result.
15038 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15040 commit c750d2e6692a000a82f29de7bf24e3dc21239161
15041 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15042 Date: Wed Sep 12 12:36:53 2007 +0200
15044 NAND: Add CFG_NAND_QUIET option
15046 This config option sets the default for the progress information
15047 output behavior that can also be configured through the 'quiet'
15048 environment variable.
15050 The legacy NAND code does not print the current progress info
15051 on the console. So this option is for backward compatibility for
15052 units that are in the field and where setting the quiet variable
15053 is not an option. With CFG_NAND_QUIET set to '1' the console
15054 progress info is turned off. This can still be overwritten
15055 through the environment variable.
15057 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15059 commit dcb88630290d2bcd803386dd4c2be73142994c4f
15060 Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com>
15061 Date: Thu Sep 13 16:06:05 2007 -0700
15063 ColdFire: fix build error becasue of bad type of mii_init()
15065 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
15067 commit 314d5b6ce52a4ed19dd295d1364e246c5e605017
15068 Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com>
15069 Date: Thu Sep 13 16:04:05 2007 -0700
15071 ColdFire: Fix build error caused by pixis.c
15073 Moved the #include <asm/cache.h> inside the #ifdef CONFIG_FSL_PIXIS.
15075 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
15077 commit e21659e30660a1377c42af135a6114efe39801d9
15078 Author: Sam Sparks <SSparks@twacs.com>
15079 Date: Fri Sep 14 11:14:42 2007 -0600
15081 Update MPC8349ITX*_config to place config.tmp in right place.
15083 MPC834ITX*_config does not store config.tmp at the correct locatation,
15084 causing MPC8349ITXGP to have the wrong TEXT_BASE.
15086 Signed-off-by: Sam Sparks <SSparks@twacs.com>
15087 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15089 commit 1218abf1b5817a39a82399b4b928b00750575bda
15090 Author: Wolfgang Denk <wd@denx.de>
15091 Date: Sat Sep 15 20:48:41 2007 +0200
15093 Fix cases where DECLARE_GLOBAL_DATA_PTR was not declared as global
15095 Signed-off-by: Wolfgang Denk <wd@denx.de>
15097 commit 66b3f24d665be678a9dbb125b1e84185400f63b5
15098 Author: Dirk Behme <dirk.behme@googlemail.com>
15099 Date: Sat Sep 15 11:55:42 2007 +0200
15101 Make DECLARE_GLOBAL_DATA_PTR global for DaVinci
15103 As discussed in [1], DECLARE_GLOBAL_DATA_PTR has to be global and not
15106 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
15108 [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/31805
15110 commit 991b089d1ce5ad945725e3657a8f106dfa02a38e
15111 Author: Michal Simek <monstr@monstr.eu>
15112 Date: Sat Sep 15 00:03:35 2007 +0200
15114 Synchronize with U-BOOT mainline
15116 commit d7fee32b7e61fe11c64e371cde79faa4768e8350
15117 Author: Sam Sparks <SSparks@twacs.com>
15118 Date: Fri Sep 14 11:14:42 2007 -0600
15120 Update MPC8349ITX*_config to place config.tmp in right place.
15122 MPC834ITX*_config does not store config.tmp at the correct locatation,
15123 causing MPC8349ITXGP to have the wrong TEXT_BASE.
15125 Signed-off-by: Sam Sparks <SSparks@twacs.com>
15126 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15127 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15129 commit 6e7b7b6ea1b6d04dbe96242eb6a0c1c664c98e8c
15130 Author: Bartlomiej Sieka <tur@semihalf.com>
15131 Date: Thu Sep 13 18:21:48 2007 +0200
15133 cm5200: Fix a typo introduced by afaac86fe2948ac84cd9a12bbed883b3c683e7d9
15135 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
15137 commit e1f601b572db5de9aa81a0b77c68a86994fe24c4
15138 Author: Bartlomiej Sieka <tur@semihalf.com>
15139 Date: Thu Sep 13 16:33:59 2007 +0200
15141 tqm5200: Restore customary env. variable boot commands for powerpc kernels
15143 - update default definitions of kernel_addr and fdt_addr env. variables
15144 - make arch/powerpc booting the default scenario
15145 - update MTD partition layout to match the above
15147 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
15149 commit f34024d4a328e6edd906456da98d2c537155c4f7
15150 Author: Wolfgang Denk <wd@denx.de>
15151 Date: Wed Sep 12 00:48:57 2007 +0200
15153 Fix memory corruption problem on STX GP3 SSA Board.
15155 Signed-off-by: Wolfgang Denk <wd@denx.de>
15157 commit d94c79e47011af5e8dd10ed6163c09b4cfc743cc
15158 Author: Peter Pearse <peter.pearse@arm.com>
15159 Date: Tue Sep 11 15:35:01 2007 +0100
15163 commit 38ad82da0c1180ecdeb212a8f4245e945bcc546e
15164 Author: Grzegorz Bernacki <gjb@semihalf.com>
15165 Date: Tue Sep 11 15:42:11 2007 +0200
15167 [GP3SSA] Add define CONFIG_MPC85XX_PCI2 in config file to allow u-boot to
15168 scan on second pci bus.
15170 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
15172 commit 6c2f4f388e8181655ea8b69343ea00b68aa6e8d0
15173 Author: Grzegorz Bernacki <gjb@semihalf.com>
15174 Date: Tue Sep 11 12:57:52 2007 +0200
15176 [ppc4xx] Individual handling of sdram.c for bamboo_nand build
15178 Bamboo has a file sdram.c which needs special treatment when building in
15179 separate directory. It has to be linked to build directory otherwise it is
15182 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
15184 commit d45963854eff39d575124d859419bb4953ce2c87
15185 Author: Michal Simek <monstr@monstr.eu>
15186 Date: Tue Sep 11 00:37:04 2007 +0200
15188 [FIX] Microblaze ML401 - repare FLASH handling
15190 commit 38c1ef728d19950414a8ab1ccfc53767848fa346
15191 Author: Sean MCGOOGAN <sean.mcgoogan@st.com>
15192 Date: Mon Sep 10 16:55:59 2007 +0100
15194 Allocate CPU Architecture Code for STMicroelectronics' ST200.
15196 Signed-off-by: Sean McGoogan <Sean.McGoogan@st.com>
15197 ---------------------------------------------------
15199 commit 754bac48156f8958d8f6a53a51eda88ab5758929
15200 Author: Wolfgang Denk <wd@denx.de>
15201 Date: Mon Sep 10 20:42:31 2007 +0200
15203 Update version to match current state.
15205 Signed-off-by: Wolfgang Denk <wd@denx.de>
15207 commit 7a888d6b3c32a126dbb504ef146bb4c26574ca7b
15208 Author: Grzegorz Bernacki <gjb@semihalf.com>
15209 Date: Mon Sep 10 17:39:08 2007 +0200
15211 [MPC512x] Streamline frame handling in the FEC driver
15213 - convert frame size settings to be derived from a single base
15214 - set frame size to the recommended default value
15216 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
15218 commit e251e00d0db4b36d1d2b7e38fec43a7296b529a2
15219 Author: Kyungmin Park <kmpark@infradead.org>
15220 Date: Mon Sep 10 11:34:00 2007 +0900
15222 Remove compiler warning: target CPU does not support interworking
15224 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
15226 commit 1d9e31e04911a6bb7cc66dd91132c699101c32e2
15227 Author: Wolfgang Denk <wd@denx.de>
15228 Date: Sun Sep 9 21:21:33 2007 +0200
15230 Fix compile error in spc1920 config.
15232 Signed-off-by: Markus Klotzbücher <mk@denx.de>
15233 Signed-off-by: Wolfgang Denk <wd@denx.de>
15235 commit a7d7eca791a37f452c9da10fef4b31dd7aa9a622
15236 Author: Grant Likely <grant.likely@secretlab.ca>
15237 Date: Fri Sep 7 09:25:07 2007 -0600
15239 Bugfix: make bootm+libfdt compile on boards with no flash
15241 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15243 commit 6efc1fc0b63e55f94c5bc61d8dd23c918e3bc778
15244 Author: Grzegorz Bernacki <gjb@semihalf.com>
15245 Date: Fri Sep 7 18:35:37 2007 +0200
15247 [PPC440SPe] PCIe environment settings for Katmai and Yucca
15249 - 'pciconfighost' is set by default in order to be able to scan bridges
15250 behind the primary host/PCIe
15252 - 'pciscandelay' env variable is recognized to allow for user-controlled
15253 delay before the PCIe bus enumeration; some peripheral devices require a
15254 significant delay before they can be scanned (e.g. LSI8408E); without the
15255 delay they are not detected
15257 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
15259 commit 7f1913938984ef6c6a46cb53e003719196d9c5de
15260 Author: Grzegorz Bernacki <gjb@semihalf.com>
15261 Date: Fri Sep 7 18:20:23 2007 +0200
15263 [PPC440SPe] Improve PCIe configuration space access
15265 - correct configuration space mapping
15266 - correct bus numbering
15267 - better access to config space
15269 Prior to this patch, the 440SPe host/PCIe bridge was able to configure only the
15270 first device on the first bus. We now allow to configure up to 16 buses;
15271 also, scanning for devices behind the PCIe-PCIe bridge is supported, so
15272 peripheral devices farther in hierarchy can be identified.
15274 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
15276 commit 15ee4734e4e08003d73d9ead3ca80e2a0672e427
15277 Author: Grzegorz Bernacki <gjb@semihalf.com>
15278 Date: Fri Sep 7 17:46:18 2007 +0200
15280 [PPC440SPe] Convert machine check exceptions handling
15282 Convert using fixup mechanism to suppressing MCK for the duration of config
15283 read/write transaction: while fixups work fine with the case of a precise
15284 exception, we identified a major drawback with this approach when there's
15285 an imprecise case. In this scenario there is the following race condition:
15286 the fixup is (by design) set to catch the instruction following the one
15287 actually causing the exception; if an interrupt (e.g. decrementer) happens
15288 between those two instructions, the ISR code is executed before the fixup
15289 handler the machine check is no longer protected by the fixup handler as it
15290 appears as within the ISR code. In consequence the fixup approach is being
15291 phased out and replaced with explicit suppressing of MCK during a PCIe
15292 config read/write cycle.
15294 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
15296 commit ff7640c9ead8806b5d827f2b29f9cb2632add729
15297 Author: Wolfgang Denk <wd@denx.de>
15298 Date: Fri Sep 7 17:43:36 2007 +0200
15300 Fix typo in MAKEALL script.
15302 Signed-off-by: Wolfgang Denk <wd@denx.de>
15304 commit 08e2e5fcd2e06670b62e1680a3934c0e55c72810
15305 Author: Grzegorz Bernacki <gjb@semihalf.com>
15306 Date: Fri Sep 7 17:09:21 2007 +0200
15308 [MPC512x] Proper handling of larger frames in the FEC driver
15310 When frame larger than local RX buffer is received, it is split and handled
15311 by two buffer descriptors. Prior to this patch the FEC driver discarded
15312 contents of a buffer descriptor without the 'LAST' bit set, so the first
15313 part of the frame was lost in case of larger frames. This fix allows to
15314 safely combine the two pieces into the whole frame.
15316 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
15318 commit 8d17979d0359492a822a0a409d26e3a3549b4cd4
15319 Author: Rafal Jaworowski <raj@semihalf.com>
15320 Date: Fri Sep 7 17:05:36 2007 +0200
15322 [MPC512x] Correct fixup relocation
15324 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
15326 commit a89cbbd27a60e6740772000fd0688ffba1c2576a
15327 Author: Wolfgang Denk <wd@denx.de>
15328 Date: Fri Sep 7 01:21:25 2007 +0200
15330 Update CHANGELOG, minor coding style cleanup.
15332 commit 5e5803e119de3bebd76fc9a57baac0b5aeccc8a3
15333 Author: stefano babic <sbabic@denx.de>
15334 Date: Thu Aug 30 23:01:49 2007 +0200
15336 PXA270: Added support for TrizepsIV board.
15338 This patch add support for the Trizeps IV module (520Mhz).
15340 Signed-off-by: Stefano Babic <sbabic@denx.de>
15342 commit 80172c6181c912fbb34ea3ba0c22b232b419b47f
15343 Author: stefano babic <sbabic@denx.de>
15344 Date: Thu Aug 30 22:57:04 2007 +0200
15346 PXA270: Add support for multiple serial ports.
15348 This patch adds support for multiple serial ports to the PXA target.
15349 FFUART, BTUART and STUART are supported.
15351 Signed-off-by: Stefano Babic <sbabic@denx.de>
15353 commit 28bb3f72c687ac6b2eb076b01dd21a5fd657d45e
15354 Author: stefano babic <sbabic@denx.de>
15355 Date: Thu Aug 30 22:48:47 2007 +0200
15357 PXA270: fix compile issue (invalid lvalue)
15359 Code is broken for PXA270 due to "invalid lvalue in assignment".
15361 This patch fix it in pxa-regs.h
15363 Signed-off-by: Stefano Babic <sbabic@denx.de>
15365 commit 1d2ca446e1a731df420206d04fe278c27ea6b8e8
15366 Author: Jason Jin <Jason.jin@freescale.com>
15367 Date: Thu Aug 30 18:19:05 2007 +0800
15369 Add BUILD_DIR support for bios emulator.
15371 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
15373 commit b4d8a55145442f136982634862341a3e02002bda
15374 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
15375 Date: Fri Aug 31 14:41:51 2007 +0900
15377 [MIPS] Remove inline asm string functions
15379 Stop using inline string functions on MIPS as other ARCHs do so,
15380 since the optimized inline asm versions are not small.
15382 This change is triggered by a following MIPS build error:
15383 common/libcommon.a(exports.o)(.text+0xdc): In function `jumptable_init':
15384 common/exports.c:32: undefined reference to `strcmp'
15385 make: *** [u-boot] Error 1
15387 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
15389 commit 8ea2c4e54833deaebc24c3ca6b7f21353c25b0f5
15390 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
15391 Date: Fri Aug 31 14:41:45 2007 +0900
15393 [MIPS] Update asm string header
15395 This patches contains several bugfixes and cleanups in the latest upstream:
15397 - Don't include linux/config.h
15398 - Remove buggy inline version of memscan.
15399 - Merge with Linux 2.6.11-rc3.
15400 - Fix undefined reference to strcpy in binfmt_misc caused by gcc 3.4.
15401 - Goodbye mips64. 31704 lines of code bite the dust.
15402 - Replace extern inline with static inline.
15403 - Fix return value of strncpy.
15404 - Remove a bunch more "$1" clobbers.
15406 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
15408 commit 5b729fb3bd98f49855d6bfc657c3fbae95f2adc2
15409 Author: Bartlomiej Sieka <tur@semihalf.com>
15410 Date: Tue Sep 4 17:31:22 2007 +0200
15412 Fix do_bootm_linux() so that multi-file images with FDT blob boot.
15414 Fix incorrect blob address calculation in do_bootm_linux() that prevents
15415 booting the kernel from a multi-file image (kernel + initrd + blob).
15417 Also, make minor updates to the U-Boot's output and to the coding style.
15419 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
15421 commit 041a2554ad619e80dce520c1a33210affcb6a3f2
15422 Author: Gary Jennejohn <gary.jennejohn@freenet.de>
15423 Date: Fri Aug 31 14:29:04 2007 +0200
15425 Add support for Sil680 IDE controller.
15427 o add drivers/sil680.c to support the Sil680 IDE-controller.
15428 o drivers/Makefile: add sil680.o.
15430 Signed-off-by: Gary Jennejohn <garyj@denx.de>
15432 commit e79021223bc339df655e360645a52c457a74b067
15433 Author: Grant Likely <grant.likely@secretlab.ca>
15434 Date: Thu Sep 6 09:47:40 2007 -0600
15436 bootm/fdt: Only process the fdt if an fdt address was provided
15438 Boards with CONFIG_OF_LIBFDT enabled are not able to boot old-style
15439 kernels using the board info structure (instead of passing a device tree)
15440 This change allows the old style booting to be used if the fdt argument
15441 was not passed to 'bootm'.
15443 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15444 Acked-by: Kim Phillips <kim.phillips@freescale.com>
15446 commit cf2817a84c2e9bea2c5dfc084bce2f2d2563ac43
15447 Author: Grant Likely <grant.likely@secretlab.ca>
15448 Date: Thu Sep 6 09:46:23 2007 -0600
15450 Migrate 5xxx boards from CONFIG_OF_FLAT_TREE to CONFIG_OF_LIBFDT
15452 Affects boards: icecube (lite5200), jupiter, motionpro, tqm5200
15454 Tested on: lite5200b
15456 Note: the fixup functions have not been moved to a common place. This
15457 patch is targeted for immediate merging as in solves a build issue, but
15458 the final name/location of the fixups is still subject to debate. I
15459 propose to merge this now, and move the fixups in the next merge window
15460 to be usable by all targets.
15462 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15464 commit 41bb76e941929f54a73206fb132f7a4c275543a3
15465 Author: Grant Likely <grant.likely@secretlab.ca>
15466 Date: Thu Sep 6 09:46:17 2007 -0600
15468 libfdt: add convenience function fdt_find_and_setprop()
15470 Given the path to a node, fdt_find_and_setprop() allows a property value
15471 to be set directly.
15473 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15475 commit 80767a6cead9990d9e77e62be947843c2c72f469
15476 Author: Peter Pearse <peter.pearse@arm.com>
15477 Date: Wed Sep 5 16:04:41 2007 +0100
15479 Changed API name to coloured_led.h
15480 Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
15481 Tidied other cpu/arm920t/start.S code
15483 commit 56a9270521baaa00e12639a978302a67f61ef060
15484 Author: Kumar Gala <galak@kernel.crashing.org>
15485 Date: Thu Aug 30 16:18:18 2007 -0500
15487 Fix ULI RTC support on MPC8544 DS
15489 The RTC on the M1575 ULI chipset requires a dummy read before
15490 we are able to talk to the RTC. We accomplish this by adding a
15491 second memory region to the PHB the ULI is on and read from it.
15493 The second region is added to maintain compatiabilty with Linux's
15494 view of the PCI memory map.
15496 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15498 commit f75e89e9b5714db2b0e80074071dfbdd6f59488a
15499 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
15500 Date: Thu Aug 30 01:58:48 2007 -0500
15502 ft_board_setup update 85xx/86xx of pci/pcie bus-range property.
15504 pcie is now differentiated from pci. Add 8641 bus-range updates.
15506 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
15508 commit 9f5c3d3720e777a572dcdc8af2008b44c7243885
15509 Author: Peter Pearse <peter.pearse@arm.com>
15510 Date: Tue Sep 4 16:18:38 2007 +0100
15512 Add coloured led interface for ARM boards.
15513 Use it in cpu/arm920t/start.S to indicate U-Boot code has been entered.
15515 commit 7462fe0d5a9d40cde083fb1a3cd73911996b5ecb
15516 Author: Peter Pearse <peter.pearse@arm.com>
15517 Date: Tue Sep 4 14:49:28 2007 +0100
15519 Move include/led.h to board/at91rm9200dk
15521 commit 6e4bf9b24e57c15abc6542e685d06380bc64af27
15522 Author: Peter Pearse <peter.pearse@arm.com>
15523 Date: Tue Sep 4 14:25:51 2007 +0100
15525 Ran Lindent on drivers/at45.c
15527 commit 557ab89d294f08dd532f21d19861b40093200a33
15528 Author: Peter Pearse <peter.pearse@arm.com>
15529 Date: Tue Sep 4 14:23:50 2007 +0100
15531 Rename CONFIG_CMD_MUX to CONFIG_CMD_AT91_SPIMUX
15533 commit 81b73dec16fd1227369a191e725e10044a9d56b8
15534 Author: Gary Jennejohn <garyj@denx.de>
15535 Date: Fri Aug 31 15:21:46 2007 +0200
15537 ppc4xx: (Re-)Enable CONFIG_PCI_PNP on AMCC 440EPx Sequoia
15539 The 440EPx has a problem when the PCI_CACHE_LINE_SIZE register is
15540 set to non-zero, because it doesn't support MRM (memory-read-
15541 multiple) correctly. We now added the possibility to configure
15542 this register in the board config file, so that the default value
15543 of 8 can be overridden.
15545 Here the details of this patch:
15547 o drivers_pci_auto.c: introduce CFG_PCI_CACHE_LINE_SIZE to allow
15548 board-specific settings. As an example the sequoia board requires 0.
15549 Idea from Stefan Roese <sr@denx.de>.
15550 o board/amcc/sequoia/init.S: add a TLB mapping at 0xE8000000 for the
15551 PCI IO-space. Obtained from Stefan Roese <sr@denx.de>.
15552 o include/configs/sequoia.h: turn CONFIG_PCI_PNP back on and set
15553 CFG_PCI_CACHE_LINE_SIZE to 0.
15555 Signed-off-by: Gary Jennejohn <garyj@denx.de>
15556 Signed-off-by: Stefan Roese <sr@denx.de>
15558 commit 60174746c668b309378a91488dded898e9553eae
15559 Author: Wolfgang Denk <wd@denx.de>
15560 Date: Fri Aug 31 10:01:51 2007 +0200
15562 Fix TFTP OACK code for short packets.
15564 The old code had a loop limit overflow bug which caused a semi-
15565 infinite loop for small packets, because in "i<len-8", "i" was signed,
15566 but "len" was unsigned, and "len-8" became a huge number for small
15569 This is a workaround which replaces broken commit 8f1bc284.
15571 Signed-off-by: Wolfgang Denk <wd@denx.de>
15573 commit 696dd1307cd8e73a10e9bb3c51731bfd6f837bee
15574 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
15575 Date: Thu Aug 30 15:03:05 2007 +0200
15577 Reduce BOOTDELAY variable to 1 second by default for STK1002
15579 Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
15580 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
15582 commit c88b6e1cbf9a8ae2a34fb602f78a1bf4e6692b6a
15583 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
15584 Date: Thu Aug 30 15:03:04 2007 +0200
15586 Remove double quotation marks around MAC address for STK1002
15588 Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
15589 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
15591 commit ff13ac8c7bbebb238e339592de765c546dba1073
15592 Author: Wolfgang Denk <wd@denx.de>
15593 Date: Thu Aug 30 14:42:15 2007 +0200
15595 Backout commit 8f1bc284 as it causes TFTP to fail.
15597 Signed-off-by: Wolfgang Denk <wd@denx.de>
15599 commit 1900fbf255acba8b94fb442a16408ea85a1d46a6
15600 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
15601 Date: Thu Aug 30 02:26:17 2007 -0500
15603 Revert "Fix MPC8544DS PCIe3 scsi."
15605 This reverts commit 9468e680.
15606 Commit 16e23c3f5da removing allocation of PCSRBAR is sufficient.
15608 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
15610 commit 8f1bc28408ded213418d9bc0780c7d8fb8a03774
15611 Author: Grant Likely <grant.likely@secretlab.ca>
15612 Date: Wed Aug 29 18:26:24 2007 -0600
15614 tftp: don't implicity trust the format of recevied packets
15616 The TFTP OACK code trusts that the incoming packet is formated as
15617 ASCII text and can be processed by string functions. It also has a
15618 loop limit overflow bug where if the packet length is less than 8, it
15619 ends up looping over *all* of memory to find the 'blksize' string.
15621 This patch solves the problem by forcing the packet to be null
15622 terminated and using strstr() to search for the sub string.
15624 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15626 commit 04625764cc93ce8a61625ac19d7fe2a2ceee8143
15627 Author: Stefan Roese <sr@denx.de>
15628 Date: Wed Aug 29 16:31:18 2007 +0200
15630 ppc4xx: Change lwmon5 default environment to support Linux RTC
15632 The Linux PCF8563 RTC driver doesn't do autoprobing, so we need
15633 to supply the RTC I2C address as bootline parameter. This patch
15634 adds support for this rtc probing parameter to the bootargs:
15636 "rtc-pcf8563.probe=0,0x51"
15638 Signed-off-by: Stefan Roese <sr@denx.de>
15640 commit 2602a5c40ae37ab965a4e240854fdaffb51328a4
15641 Author: Kim Phillips <kim.phillips@freescale.com>
15642 Date: Wed Aug 29 09:06:05 2007 -0500
15644 sbc8641: remove unused OF_FLAT_TREE_MAX_SIZE
15646 this had slipped through the cracks, since the sbc board was added
15647 after I wrote the original patch to remove all these symbols, and
15648 before it was merged.
15650 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15652 commit c5bded3c88e48ae648a75d357dc81a8255fa81f1
15653 Author: Wolfgang Denk <wd@denx.de>
15654 Date: Wed Aug 29 14:05:30 2007 +0200
15656 Add mii_init() prototype
15658 to get rid of a *lot* of compiler warnings.
15660 Signed-off-by: Wolfgang Denk <wd@denx.de>
15662 commit 2d1f23aa1e74e4a8f8ffa67f246eb98c522dfd7f
15663 Author: Wolfgang Denk <wd@denx.de>
15664 Date: Wed Aug 29 13:35:03 2007 +0200
15666 Disable network support on cmi_mpc5xx board
15668 ..because it caused compiler errors and there seems to be no
15669 board maintainer to take care of this.
15671 Signed-off-by: Wolfgang Denk <wd@denx.de>
15673 commit 9468e6804b7e25b0f6f52e53f47bce3175400a16
15674 Author: Kumar Gala <galak@kernel.crashing.org>
15675 Date: Mon Aug 20 09:44:00 2007 -0500
15677 Fix MPC8544DS PCIe3 scsi.
15679 <ed.swarthout@freescale.com>
15681 The problem is pciauto_setup_device() getting called from fsl_pci_init.c
15682 is allocating memory space it doesn't need.
15684 Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com>
15685 Signed-off-by: Andy Fleming <afleming@freescale.com>
15687 commit 4bf4abb8a4e9955556b120a1aafa30c03e74032a
15688 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
15689 Date: Tue Aug 21 09:38:59 2007 -0500
15693 Restore CONFIG_EXTRA_ENV_SETTINGS definition which contains the
15694 correct consoledev needed for linux boot.
15695 Standardize on fdt{file,addr} var to hold dtb file name.
15697 Set PCI inbound memory region from CFG_MEMORY_{BUS,PHYS}.
15699 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
15701 commit 7a1ac419fa0d2d23ddd08bd61d16896a9f33c933
15702 Author: Haiying Wang <Haiying.Wang@freescale.com>
15703 Date: Thu Aug 23 15:20:54 2007 -0400
15705 Enable L2 cache for MPC8568MDS board
15707 The L2 cache size is 512KB for 8568, print out the correct informaiton.
15709 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
15711 commit 94c47fdaf14cb29fa3fb4d4da2efdd96c803b46b
15712 Author: Jason Jin <Jason.jin@freescale.com>
15713 Date: Wed Aug 22 17:54:49 2007 +0800
15715 Remove the bios emulator binary files from MAI board
15717 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
15719 commit 7608d75f9c87c9eb5b3a43219d0506d3e979a13f
15720 Author: Kim Phillips <kim.phillips@freescale.com>
15721 Date: Tue Aug 21 17:00:17 2007 -0500
15723 support board vendor-common makefiles
15725 if a board/$(VENDOR)/common/Makefile exists, build it.
15727 also add the first such case, board/freescale/common/Makefile, to
15728 handle building board-shared EEPROM, PIXIS, and MDS-PIB code, as
15729 dictated by board configuration.
15731 thusly get rid of alternate build dir errors such as:
15733 FATAL: can't create /work/wd/tmp/u-boot-ppc/board/freescale/mpc8360emds/../common/pq-mds-pib.o: No such file or directory
15735 by putting the common/ mkdir command in its proper place (the common
15736 Makefile). Common bits from existing individual board Makefiles have
15739 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15741 commit ef8f20752712dc1cdbd86f47e3bd6e35f81c83fd
15742 Author: stefano babic <sbabic@denx.de>
15743 Date: Tue Aug 21 15:52:33 2007 +0200
15745 Fix: TFTP is not working on little endian systems
15747 TFTP does not work anymore after multicast tftp
15748 patch was applied on little endian systems.
15751 Signed-off-by: Stefano Babic <sbabic@denx.de>
15753 commit 5f470948570526e9186f053a3003da7719604e90
15754 Author: stefano babic <sbabic@denx.de>
15755 Date: Tue Aug 21 15:50:33 2007 +0200
15757 Fix MAC address setting in DM9000 driver.
15759 The logic to check if there is a correct MAC address in the DM9000
15760 EEPROM, added in the last patch, is wrong. Now the MAC address is
15761 always taken from the environment, even if a suitable MAC is present
15764 Signed-off-by: Stefano Babic <sbabic@denx.de>
15766 commit 4a8527ef086ec7c89f40674ef024ae6f988a614a
15767 Author: Martin Krause <martin.krause@tqs.de>
15768 Date: Tue Aug 21 12:40:34 2007 +0200
15770 MPC5xxx: fix some compiler warnings in USB code
15772 Fix the following warnings:
15773 - usb.c:xx: warning: function declaration isn't a prototype
15774 - usb_ohci.c:xxx: warning: passing argument 1 of '__fswab32' makes integer
15775 from pointer wihtout a cast
15777 Signed-off-by: Martin Krause <martin.krase@tqs.de>
15779 commit 16e23c3f5dab6937f5109365416808c7f15c122b
15780 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
15781 Date: Mon Aug 20 23:55:33 2007 -0500
15783 fsl_pci_init - Remove self PCSRBAR allocation
15785 CPU physical address space was being wasted by allocating a
15786 PCSRBAR PCI inbound region to it's memory space.
15788 As a rule, PCSRBAR should be left alone since it does not affect
15789 transactions from self and other masters may have changed it.
15791 Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com>
15793 commit 0e700ce03a23bb1921149bc77008ace7103d5289
15794 Author: Martin Krause <martin.krause@tqs.de>
15795 Date: Mon Aug 20 13:56:47 2007 +0200
15797 Fix compiler warning in include/s3c2410.h
15799 This patch fixes the "type qualifiers ignored on fuction return tpye"
15800 warning for include/s3c2410.h
15802 Signed-off-by: Martin Krause <martin.krause@tqs.de>
15804 commit 9bb8b209ed2058a5756ecbeb544c067e44a42aea
15805 Author: Dirk Behme <dirk.behme@googlemail.com>
15806 Date: Mon Aug 20 07:09:05 2007 +0200
15808 Fix compilation error for omap2420h4_config.
15810 omap2420h4 switched to cfi, so remove old (already disabled) flash.c
15811 and flash_probe() calls in env_flash.c.
15813 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
15815 commit 3bb342fc85d79dbb6b8c2039e7cdcddc82b8d90f
15816 Author: Kim Phillips <kim.phillips@freescale.com>
15817 Date: Fri Aug 10 14:34:14 2007 -0500
15819 fdt: remove unused OF_FLAT_TREE_MAX_SIZE references
15821 and make some minor corrections to the FDT part of the README.
15823 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15825 commit 6af2eeb1e99c2dcc584d4c5ab7fcae30a325f4de
15826 Author: Wolfgang Denk <wd@denx.de>
15827 Date: Wed Aug 29 01:32:05 2007 +0200
15829 Minor coding style cleanup.
15831 Signed-off-by: Wolfgang Denk <wd@denx.de>
15833 commit a861558c65f65f1cf1302f3a35e9db7686b9e1a3
15834 Author: Heiko Schocher <hs@pollux.denx.de>
15835 Date: Tue Aug 28 17:40:33 2007 +0200
15837 [UC101] Fix: if no CF in the board, U-Boot resets sometimes.
15839 Signed-off-by: Heiko Schocher <hs@denx.de>
15841 commit f98984cb194bb34dbe1db9429d3b51133af30d07
15842 Author: Heiko Schocher <hs@pollux.denx.de>
15843 Date: Tue Aug 28 17:39:14 2007 +0200
15845 IDE: - make ide_inb () and ide_outb () "weak", so boards can
15846 define there own I/O functions.
15847 (Needed for the pcs440ep board).
15848 - The default I/O Functions are again 8 Bit accesses.
15849 - Added CONFIG_CMD_IDE for the pcs440ep Board.
15851 Signed-off-by: Heiko Schocher <hs@denx.de>
15853 commit 2c05fd125744981e5f2828d24e66ccc20a77d25d
15854 Author: Semih Hazar <semih.hazar@indefia.com>
15855 Date: Mon Aug 20 19:00:01 2007 +0300
15857 AVR32: Change prototype of memset
15859 Signed-off-by: Semih Hazar <semih.hazar@indefia.com>
15860 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
15862 commit 9c02defc29b57945b600714cf61ddfd02b02fb14
15863 Author: Yuri Tikhonov <yur@emcraft.com>
15864 Date: Sat Aug 25 05:07:16 2007 +0200
15866 POST: limit memory test area to not touch global data anymore
15868 As experienced on lwmon5, on some boards the POST memory test can
15869 corrupt the global data buffer (bd). This patch fixes this issue
15870 by checking and limiting this area.
15872 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
15873 Signed-off-by: Stefan Roese <sr@denx.de>
15875 commit 75e1a84d483e36be10e206e539b028c4889e1158
15876 Author: Stefan Roese <sr@denx.de>
15877 Date: Fri Aug 24 15:41:42 2007 +0200
15879 ppc4xx: Add RTC POST test to lwmon5 board configuration
15881 Since this RTC POST test is taking quite a while to complete
15882 it's only initiated upon special keypress same as the complete
15885 Signed-off-by: Stefan Roese <sr@denx.de>
15887 commit d7bfa620037a6d2210159387571bdf93aa32c162
15888 Author: Stefan Roese <sr@denx.de>
15889 Date: Fri Aug 24 15:19:10 2007 +0200
15891 ppc4xx: Change GPIO signal for watchdog triggering on lwmon5
15893 Signed-off-by: Stefan Roese <sr@denx.de>
15895 commit c25dd8fc25e9ca3695db996a257d9ba4dab414db
15896 Author: Stefan Roese <sr@denx.de>
15897 Date: Thu Aug 23 11:02:37 2007 +0200
15899 ppc4xx: Add support for 2nd I2C EEPROM on lwmon5 board
15901 This patch adds support for the 2nd EEPROM (AT24C128) on the lwmon5
15902 board. Now the "eeprom" command can be used to read/write from/to this
15903 device. Additionally a new command was added "eepromwp" to en-/disable
15904 the write-protect of this 2nd EEPROM.
15906 The 1st EEPROM is not affected by this write-protect command.
15908 Signed-off-by: Stefan Roese <sr@denx.de>
15910 commit c64fb30e4c5976007d56fc1789c7a0666082b536
15911 Author: Stefan Roese <sr@denx.de>
15912 Date: Wed Aug 22 08:56:09 2007 +0200
15914 ppc4xx: Remove unused option CFG_INIT_RAM_OCM
15916 Signed-off-by: Stefan Roese <sr@denx.de>
15918 commit 3ad63878737a5a2b1e60825bf0a7d601d7a695e7
15919 Author: Stefan Roese <sr@denx.de>
15920 Date: Tue Aug 21 16:27:57 2007 +0200
15922 ppc4xx: Add matrix kbd support to lwmon5 board (440EPx based)
15924 This patch adds support for the matrix keyboard on the lwmon5 board.
15925 Since the implementation in the dsPCI is kind of compatible with the
15926 "old" lwmon board, most of the code is copied from the lwmon
15929 Signed-off-by: Stefan Roese <sr@denx.de>
15931 commit 3e66c078003607a7d1d214c15a5f262bc1b4032f
15932 Author: Wolfgang Denk <wd@denx.de>
15933 Date: Sun Aug 19 10:27:34 2007 +0200
15935 Fix some build errors.
15937 Signed-off-by: Wolfgang Denk <wd@denx.de>
15939 commit 05675735ef77dc23b5e0eb782bad1ff477b55e86
15940 Author: Wolfgang Denk <wd@denx.de>
15941 Date: Sat Aug 18 22:00:38 2007 +0200
15945 commit 79f240f7ecc0506b43ac50d1ea405ff6540d4d57
15946 Author: Kim Phillips <kim.phillips@freescale.com>
15947 Date: Thu Aug 16 22:52:39 2007 -0500
15949 lib_ppc: make board_add_ram_info weak
15951 platforms wishing to display RAM diagnostics in addition to size,
15952 can do so, on one line, in their own board_add_ram_info()
15955 this consequently eliminates CONFIG_ADD_RAM_INFO.
15957 Thanks to Stefan for the hint.
15959 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15961 commit 815b5bd5b18569917c3e04b9757511e6ed23b9f6
15962 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
15963 Date: Fri Aug 17 12:43:44 2007 +0900
15965 PCI_READ_VIA_DWORD_OP: Fix *val uninitialized bug
15967 This patch has been sent on:
15970 Many users of PCI config read routines tend to ignore the function
15971 ret value, and are only concerned about the contents of *val. Based
15972 on this, pci_hose_read_config_{byte,word}_via_dword should initialize
15973 the *val on dword read error.
15975 Without this fix, for example, we'll go on scanning bus with vendor or
15976 header_type uninitialized. This brings many unnecessary config trials.
15978 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
15980 commit 26667b7fa05a8bf2fc65fb9f3230b02b1a10c367
15981 Author: Stefan Roese <sr@denx.de>
15982 Date: Sat Aug 18 14:37:52 2007 +0200
15984 ColdFire: Fix some remaining problems with CFG_CMD_
15986 Signed-off-by: Stefan Roese <sr@denx.de>
15988 commit 8280f6a1c43247616b68224675188e5ccd124650
15989 Author: Stefan Roese <sr@denx.de>
15990 Date: Sat Aug 18 14:33:02 2007 +0200
15992 Coding style cleanup
15994 Signed-off-by: Stefan Roese <sr@denx.de>
15996 commit 4a442d3186b31893b4f77c6e82f63c4517a5224b
15997 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
15998 Date: Thu Aug 16 19:23:50 2007 -0500
16000 ColdFire: Add M5235EVB Platform for MCF523x
16002 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
16004 commit 4cc1cd5941827a04cf5c51a07fcc42e8945894aa
16005 Author: Kim Phillips <kim.phillips@freescale.com>
16006 Date: Fri Aug 17 09:30:00 2007 -0500
16008 mpc83xx: fix typo in DDR2 programming
16010 introduced in the implement board_add_ram_info patch as I was cleaning out the
16011 magic numbers. sorry.
16013 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16015 commit e58fe95784d2514fc9c21028dc59f2b319a35d80
16016 Author: Kim Phillips <kim.phillips@freescale.com>
16017 Date: Thu Aug 16 22:53:09 2007 -0500
16019 mpc83xx: move freescale boards to boards/freescale
16021 includes build fixes.
16023 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16025 commit 5aa4ad8d8e7e9468219990c7875d5fdc9e962f47
16026 Author: Kim Phillips <kim.phillips@freescale.com>
16027 Date: Thu Aug 16 22:52:59 2007 -0500
16029 mpc83xx: suppress unused variable 'val8' warning
16031 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16033 commit bbea46f76f767b919070b4829bf34c86bd223248
16034 Author: Kim Phillips <kim.phillips@freescale.com>
16035 Date: Thu Aug 16 22:52:48 2007 -0500
16037 mpc83xx: implement board_add_ram_info
16039 add board_add_ram_info, to make memory diagnostic output more
16040 consistent. u-boot banner output now looks like:
16042 DRAM: 256 MB (DDR1, 64-bit, ECC on)
16044 and for boards with SDRAM on the local bus, a line such as this is
16047 SDRAM: 64 MB (local bus)
16049 also replaced some magic numbers with their equivalent define names.
16051 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16053 commit 14778585d1389d86d5846efec29e5fce892680ce
16054 Author: Tony Li <tony.li@freescale.com>
16055 Date: Fri Aug 17 10:35:59 2007 +0800
16057 mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support
16059 The patch split the PIB init code from pci.c to a single file board/freescale/common/pq-mds-pib.c
16060 And add Qoc3 ATM card support for MPC8360EMDS and MPC832XEMDS board.
16062 Signed-off-by Tony Li <tony.li@freescale.com>
16064 commit 8ae158cd87a4a25722b27835261b6ff0fa2aa6a7
16065 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
16066 Date: Thu Aug 16 15:05:11 2007 -0500
16068 ColdFire: Add M54455EVB for MCF5445x
16070 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
16072 commit a1436a842654a8d3927d082a8ae9ee0a10da62d7
16073 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
16074 Date: Thu Aug 16 13:20:50 2007 -0500
16076 ColdFire: Add M5253EVBE platform for MCF52x2
16078 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
16080 commit a605aacd8324094199402816cc6d9124aba57b8d
16081 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
16082 Date: Thu Aug 16 05:04:31 2007 -0500
16084 ColdFire: Add M5249EVB platform for MCF52x2
16086 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
16088 commit f28e1bd9daa6de5eb33ae4822bda6b008ccb4e9e
16089 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
16090 Date: Wed Aug 15 20:32:06 2007 -0500
16092 ColdFire: Update Freescale MCF52x2 platforms
16094 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
16096 commit 870470dbf6f4bb9864e0d97aeedbc17c167c6d1c
16097 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
16098 Date: Wed Aug 15 19:55:10 2007 -0500
16100 ColdFire: Update EB+MCF-EV123 platform
16102 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
16104 commit aa93d859d9b1fcd8eea52d51b06e86c38f72111b
16105 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
16106 Date: Wed Aug 15 19:46:38 2007 -0500
16108 ColdFire: update TASREG platform for MCF52x2
16110 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
16112 commit a9505510bf56a9b5558248dd8b73ec9d9a1556a2
16113 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
16114 Date: Wed Aug 15 19:45:51 2007 -0500
16116 ColdFire: update r5200 platform for MCF52x2
16118 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
16120 commit 6cfd3c7bc813fb317ab7c0781f0d1874b1c0877c
16121 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
16122 Date: Wed Aug 15 19:43:20 2007 -0500
16124 ColdFire: idmr platform MCF52x2 update
16126 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
16128 commit 6706424d0bb851fb52af00cd1c3301e91ee7f2b0
16129 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
16130 Date: Wed Aug 15 19:41:06 2007 -0500
16132 ColdFire: cobra5272 platform for MCF52x2 update
16134 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
16136 commit 56115665b4a64c10c01440c57749b265e0908fa4
16137 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
16138 Date: Wed Aug 15 19:38:15 2007 -0500
16140 ColdFire: MCF52x2 Header files update
16142 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
16144 commit 83ec20bc4380eebddfde45da6e3a69a92d4db21d
16145 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
16146 Date: Wed Aug 15 19:21:21 2007 -0500
16148 ColdFire: MCF52x2 update
16150 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
16152 commit f52e78304dcc0ac459c0ea1fa5be275c7d1642cf
16153 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
16154 Date: Wed Aug 15 18:46:11 2007 -0500
16156 ColdFire: MCF5329 update cache
16158 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
16160 commit 7171977fb8fd77cfb6676953fa9a05789c450513
16161 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
16162 Date: Wed Aug 15 15:40:20 2007 -0500
16164 ColdFire: MCF5329 header file clean up
16166 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
16168 commit ab77bc547ba561c25ea34457ed17aa0b2f7c2723
16169 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
16170 Date: Wed Aug 15 15:39:17 2007 -0500
16172 ColdFire: MCF5329 Update and cleanup
16174 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
16176 commit 10327dc5541f947c0cf7e31fef86c4706169607a
16177 Author: Andy Fleming <afleming@freescale.com>
16178 Date: Thu Aug 16 16:35:02 2007 -0500
16180 Add CONFIG_HAS_ETH0 to all boards with TSEC
16182 The 85xx code now relies on CONFIG_HAS_ETH0 to determine whether
16183 to update TSEC1's device-tree node, so we need to add it
16184 to all the boards with TSECs. Do this for 83xx and 86xx, too,
16185 since they will eventually do something similar.
16187 Signed-off-by: Andy Fleming <afleming@freescale.com>
16189 commit d64ee908a1b525e5bb2b4cbeb5c449ad6a469666
16190 Author: Kumar Gala <galak@kernel.crashing.org>
16191 Date: Thu Aug 16 15:05:04 2007 -0500
16193 Update MPC8544 DS PCI memory map
16195 The PCIe bus that the ULI M1575 is connected to has no possible way of
16196 needing more than the fixed amount of IO & Memory space needed by the ULI.
16198 So make it use far less IO & memory space and have it use the shared LAW. This
16199 free's up a LAW for PCIe1 IO space. Also reduce the amount of IO space needed
16202 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16204 commit ea5877e31ed63ade948fd1293895ec23fe01472e
16205 Author: Kumar Gala <galak@kernel.crashing.org>
16206 Date: Thu Aug 16 11:01:21 2007 -0500
16208 Fix up some fdt issues on 8544DS
16210 It looks like we had a merge issue that duplicated a bit of code
16211 in ft_board_setup. Also, we need to set CONFIG_HAS_ETH0 to get
16212 the MAC address properly set in the device tree on boot for TSEC1
16214 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16216 commit 07bc20560cb9d3d186cca268c05c82762e8c55ad
16217 Author: Niklaus Giger <niklaus.giger@netstal.com>
16218 Date: Thu Aug 16 15:16:03 2007 +0200
16220 PPC4xx:HCU4/5 cleanup
16222 Minor cleanups to confirm to the u-boot coding style.
16223 Some german expressions -> english.
16224 HCU5 enforces a unique IP adress for a given slot in the rack.
16226 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
16228 commit 1e6b07c64967c1eb2cd84faa4c32bf2a769bc8eb
16229 Author: Niklaus Giger <niklaus.giger@netstal.com>
16230 Date: Thu Aug 16 15:16:02 2007 +0200
16232 PPC4xx:HCU4/5 cleanup ecc/sdram init
16234 Make ecc initialisation robust, as DDR2-ECC errors may be generated
16235 while zeroing the RAM.
16237 Return 16 bytes (a cacheline) less than the available memory, as the
16238 board and/or PPC440EPx might have problems accessing the last bytes.
16240 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
16242 commit d35b508a55508535b6e8445b718585d27df733d3
16243 Author: Kim Phillips <kim.phillips@freescale.com>
16244 Date: Wed Aug 15 22:29:56 2007 -0500
16246 fdt: suppress unused variable 'bd' warning
16248 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16250 commit 82bd9ee77490588d4da785d75829ca63d0176baf
16251 Author: Andy Fleming <afleming@freescale.com>
16252 Date: Wed Aug 15 20:06:50 2007 -0500
16254 Fix warnings from of_data copy fix
16256 Forgot to cast of_flat_tree to ulong.
16258 Signed-off-by: Andy Fleming <afleming@freescale.com>
16260 commit 7613afda77d5eec0f47d303025b0c661b70e4c73
16261 Author: Andy Fleming <afleming@freescale.com>
16262 Date: Wed Aug 15 20:03:44 2007 -0500
16264 Don't wait for disconnected TSECs
16266 The TSEC driver's PHY code waits a long time for autonegotiation to
16267 complete, even if the link is down. The PHY knows the link is
16268 down or up before autonegotiation completes, so we can short-circuit
16269 the process if the link is down.
16271 Signed-off-by: Andy Fleming <afleming@freescale.com>
16273 commit b96c83d4ae475a70ef2635cd0e748174c44c8601
16274 Author: Andy Fleming <afleming@freescale.com>
16275 Date: Wed Aug 15 20:03:34 2007 -0500
16277 Fix numerous bugs in the 8568 UEC support
16279 Actually, fixed a large bug in the UEC for *all* platforms.
16280 How did this ever work?
16282 uec_init() did not follow the spec for eth_init(), and returned
16283 0 on success. Switch it to return the link like tsec_init()
16286 The immap for the 8568 was defined based on MPC8568, rather than
16291 CONFIG_ETHPRIME was set to "Freescale GETH". Now is "FSL UEC0"
16293 Fixed a comment about the ranges for CONFIG_ETHPRIME if TSEC_ENET is
16296 Signed-off-by: Andy Fleming <afleming@freescale.com>
16298 commit 3a79013e2adda53332dfd0b511066a805e929a9d
16299 Author: Andy Fleming <afleming@freescale.com>
16300 Date: Wed Aug 15 20:03:25 2007 -0500
16302 Define tsec flag values in config files
16304 The tsec_info structure and array has a "flags" field for each
16305 ethernet controller. This field is the only reason there are
16306 settings. Switch to defining TSECn_FLAGS for each controller
16307 in the config header, and we can greatly simplify the array, and
16308 also simplify the addition of future boards.
16310 Signed-off-by: Andy Fleming <afleming@freescale.com>
16312 commit ec7238229507e7f47533a611ea8c53319d234cf3
16313 Author: Andy Fleming <afleming@freescale.com>
16314 Date: Wed Aug 15 20:03:13 2007 -0500
16316 Add support for building all boards with a TSEC
16318 Changes to the TSEC driver affect almost all 83xx, 85xx, and 86xx boards.
16319 Now we can do a MAKEALL test on all of them!
16321 Signed-off-by: Andy Fleming <afleming@freescale.com>
16323 commit 10aaf716cb0dc6614df54ef78bed5144afd23ef8
16324 Author: Andy Fleming <afleming@freescale.com>
16325 Date: Wed Aug 15 17:30:56 2007 -0500
16327 Fix of_data copying for CONFIG_OF_FLAT_TREE-using boards
16329 The fix, "Fix where the #ifdef CFG_BOOTMAPSZ is placed"
16330 neglected to *also* put the code inside the similar #ifdef
16331 for CONFIG_OF_FLAT_TREE.
16333 Signed-off-by: Andy Fleming <afleming@freescale.com>
16335 commit 78f9fef7f406078c8bf7191e665a73f795157746
16336 Author: Scott Wood <scottwood@freescale.com>
16337 Date: Wed Aug 15 15:46:46 2007 -0500
16339 mpc885ads: Don't define CONFIG_BZIP2.
16341 bzip2 requires a significant chunk of malloc space, and there isn't
16342 enough room on mpc885ads (with only 8MB RAM) for both bzip2's malloc area
16343 and a downloaded image at 0x400000.
16345 Signed-off-by: Scott Wood <scottwood@freescale.com>
16347 commit 002275a3ed8b114885f6702d6d544d0780dfe689
16348 Author: Michal Simek <Monstr@seznam.cz>
16349 Date: Thu Aug 16 08:54:10 2007 +0200
16351 Bios emulator - fix microblaze toolchain problem
16353 microblaze CPU have problem with bios_emulator code.
16354 Microblaze toolchain doesn't support PRAGMA PACK.
16356 Signed-off-by: Michal Simek <monstr@monstr.eu>
16358 commit a5a38f4fd7e5366d706ff6a985f9b6715ddbc98b
16359 Author: Wolfgang Denk <wd@denx.de>
16360 Date: Thu Aug 16 11:51:04 2007 +0200
16362 Minor Coding Style fix; Update CHANGELOG file.
16364 Signed-off-by: Wolfgang Denk <wd@denx.de>
16366 commit 8fb6e80c06849e3013ac5c9350d8ed9e52967991
16367 Author: Stefan Roese <sr@denx.de>
16368 Date: Thu Aug 16 11:21:49 2007 +0200
16370 ppc4xx: Remove #warning in esd auto_update.c
16372 Signed-off-by: Stefan Roese <sr@denx.de>
16374 commit 2d78074d2e806edc380c1464eb9e5df335ece65e
16375 Author: Stefan Roese <sr@denx.de>
16376 Date: Fri Jun 22 17:32:28 2007 +0200
16378 ppc7xx: Update CPCI750 board
16380 This small CPCI750 update extends the board specific command
16381 "show_config" to display the Marvell strapping registers and
16382 extends the PCI IDE controller.
16384 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
16385 Signed-off-by: Stefan Roese <sr@denx.de>
16387 commit 78cff50edba6b1508eb15c2f53ce966ac891eb9e
16388 Author: Michal Simek <monstr@monstr.eu>
16389 Date: Thu Aug 16 10:46:28 2007 +0200
16391 [FIX] Changes for bios_emulator code for others architecture
16393 commit 6e0e2253f039344f8ebd2787285fdba90e6714e8
16394 Author: Michal Simek <monstr@monstr.eu>
16395 Date: Thu Aug 16 10:45:09 2007 +0200
16397 [FIX] Remove unused include file
16399 commit 9de469bd960cc1870bb40d6672ed42726b8b50d7
16400 Author: Stefan Roese <sr@denx.de>
16401 Date: Thu Aug 16 10:18:33 2007 +0200
16403 ppc4xx: Only enable POST FPU test on Sequoia and not Rainier
16405 Signed-off-by: Stefan Roese <sr@denx.de>
16407 commit 6da0c5bd4a53e40eb4f7eb72a4c051ecabad783c
16408 Author: Stefan Roese <sr@denx.de>
16409 Date: Thu Aug 16 09:54:51 2007 +0200
16411 Add missing rainier (PPC440GRx) target to MAKEALL and MAINTAINERs files
16413 Signed-off-by: Stefan Roese <sr@denx.de>
16415 commit 02ba7022f62bb75908296c58c63866e1d294b69a
16416 Author: Stefan Roese <sr@denx.de>
16417 Date: Thu Aug 16 09:52:29 2007 +0200
16419 ppc4xx: Update Sequoia/Rainier bootstrap command
16421 As suggested by David Mitchell, here an update for the Sequoia/Rainier
16424 Signed-off-by: Stefan Roese <sr@denx.de>
16426 commit 35cc4e4823668e8745854899cfaedd4489beb0ef
16427 Author: Kim Phillips <kim.phillips@freescale.com>
16428 Date: Wed Aug 15 22:30:39 2007 -0500
16430 mpc83xx: enable libfdt by default on freescale boards
16432 this enables libfdt code by default for the
16433 freescale mpc8313erdb, mpc832xemds, mpc8349emds,
16434 mpc8349itx and gp boards.
16436 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16438 commit 3fde9e8b22cfbd7af489214758f9839a206576cb
16439 Author: Kim Phillips <kim.phillips@freescale.com>
16440 Date: Wed Aug 15 22:30:33 2007 -0500
16442 mpc83xx: migrate remaining freescale boards to libfdt
16444 this adds libfdt support code for the freescale
16445 mpc8313erdb, mpc832xemds, mpc8349emds, mpc8349itx,
16448 Boards remain compatible with OF_FLAT_TREE.
16450 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16452 commit 6a16e0dfcc4119b46adb1dce2d6c8fb3c5d108e1
16453 Author: Kim Phillips <kim.phillips@freescale.com>
16454 Date: Wed Aug 15 22:30:26 2007 -0500
16456 mpc83xx: move common /memory node update mechanism to cpu.c
16458 also adds common prototypes to include/common.h.
16460 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16462 commit 8f9e0e9f339aee4ce31a338d5f27356eb5457f85
16463 Author: Kim Phillips <kim.phillips@freescale.com>
16464 Date: Wed Aug 15 22:30:19 2007 -0500
16466 mpc83xx: remaining 8360 libfdt fixes
16468 PCI clocks and QE frequencies weren't being updated, and the core clock
16469 was being updated incorrectly. This patch also adds a /memory node if
16470 it doesn't already exist prior to update.
16472 plus some cosmetic trimming to single line comments.
16474 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16476 commit f4b2ac5ed9aaff9920d487bff8a59696c083a524
16477 Author: Kim Phillips <kim.phillips@freescale.com>
16478 Date: Wed Aug 15 22:30:12 2007 -0500
16480 mpc83xx: fix UEC2->1 typo in libfdt setup code
16482 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16484 commit 19fa1c35368484d4ed10ddce8a7793c21862e3a3
16485 Author: Kim Phillips <kim.phillips@freescale.com>
16486 Date: Wed Aug 15 22:30:05 2007 -0500
16488 mpc83xx: add MAINTAINER and MAKEALL entries for the mpc8323erdb
16490 and reorder the existing 83xx maintainers alpha.
16492 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16494 commit 5b4de9309d7a03aa1db2e5391ab696363391f460
16495 Author: Michal Simek <monstr@monstr.eu>
16496 Date: Wed Aug 15 21:15:05 2007 +0200
16498 [FIX] Resolve problem with warnings
16499 microblaze toolchain don't support PRAGMA PACK.
16501 commit d1ed28cf36ab6b1d4c479809de7252bf53d2f2d4
16502 Author: Michal Simek <monstr@monstr.eu>
16503 Date: Wed Aug 15 21:05:07 2007 +0200
16505 [FIX] Correction command setting for Microblaze boards
16507 commit 7aa63d8cd30ab20ac2fd1ab86e60471de8b1f1e5
16508 Author: Michal Simek <monstr@monstr.eu>
16509 Date: Wed Aug 15 21:03:41 2007 +0200
16511 [FIX] Correction command definition
16513 commit 30b52df9e906bf0e465916c2c6bb5192b438e0b8
16514 Author: Jon Loeliger <jdl@freescale.com>
16515 Date: Wed Aug 15 11:55:35 2007 -0500
16517 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
16519 Remove a leftover in net/tftp.c while we're at it.
16521 Signed-off-by: Jon Loeliger <jdl@freescale.com>
16523 commit 4ce917742b1e48faa9bf9a9757545e56fb4cfe44
16524 Author: Jon Loeliger <jdl@freescale.com>
16525 Date: Wed Aug 15 12:20:40 2007 -0500
16527 Move the MPC8641HPCN board under board/freescale.
16529 Minor path corrections needed to ensure buildability.
16531 Signed-off-by: Jon Loeliger <jdl@freescale.com>
16533 commit 8662577fe36fdb6a44b55b998d9daac6392a736a
16534 Author: Jon Loeliger <jdl@freescale.com>
16535 Date: Wed Aug 15 11:46:22 2007 -0500
16537 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
16539 Remove a leftover in net/tftp.c while we're at it.
16541 Signed-off-by: Jon Loeliger <jdl@freescale.com>
16543 commit 210f463c71917b7a4495c2103c228b9c179ae64d
16544 Author: Jerry Van Baren <gvb.uboot@gmail.com>
16545 Date: Wed Aug 15 11:13:15 2007 -0400
16547 Fix where the #ifdef CFG_BOOTMAPSZ is placed.
16549 Commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924 "Fix initrd/dtb
16550 interaction" put the new code outside of the #if defined(CONFIG_OF_LIBFDT)
16551 when it should have gone inside of the conditional. As a result, it
16552 broke non-LIBFDT board builds.
16554 Also added a missing "not." to the comment.
16556 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
16558 commit 0e19209767194a97cec6d93dba9e64d1da8d548e
16559 Author: Niklaus Giger <niklaus.giger@netstal.com>
16560 Date: Wed Aug 15 12:14:23 2007 +0200
16562 PPC4xx:HCU4/5-Board fix compile warning
16564 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
16566 commit 594e79838ce5078a90d0c27abb2b2d61d5f8e8a7
16567 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
16568 Date: Tue Aug 14 14:06:45 2007 -0500
16570 Fix malloc size error in ahci_init_one.
16572 Typically this causes scsi init to corrupt the
16573 devlist and break the coninfo command.
16574 Fix a compiler size warning.
16576 Signed-off-by: Jason Jin <jason.jin@freescale.com>
16577 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
16578 Acked-by: Andy Fleming <afleming@freescale.com>
16580 commit b361acd64fd2525c081b9b288b0804efe209c0e9
16581 Author: ksi@koi8.net <ksi@koi8.net>
16582 Date: Tue Aug 14 10:02:16 2007 -0700
16584 TI DaVinci - fix unsupported %hhx format
16586 Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
16588 commit f01dbb5424a81453c81190dd30e945891466f621
16589 Author: Wolfgang Denk <wd@denx.de>
16590 Date: Tue Aug 14 18:42:36 2007 +0200
16592 Coding style cleanup. Update CHANGELOG.
16594 Signed-off-by: Wolfgang Denk <wd@denx.de>
16596 commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924
16597 Author: Andy Fleming <afleming@freescale.com>
16598 Date: Tue Aug 14 10:32:59 2007 -0500
16600 Fix initrd/dtb interaction
16602 The original code would wrongly relocate the blob to be right before
16603 the initrd if it existed. The blob *must* be within CFG_BOOTMAPSZ,
16604 if it is defined. So we make two changes:
16606 1) flag the blob for relocation whenever its address is above BOOTMAPSZ
16608 2) If the blob is being relocated, relocate it before kbd, not initrd
16610 Signed-off-by: Andy Fleming <afleming@freescale.com>
16612 commit e54b970173769307a116bd34028b6d0c2eea2a4e
16613 Author: Peter Pearse <peter.pearse@arm.com>
16614 Date: Tue Aug 14 15:40:00 2007 +0100
16616 Supply spi interface in at45.c
16618 commit 4ce846ec59f36b85d6644a769690ad3feb667575
16619 Author: Stefan Roese <sr@denx.de>
16620 Date: Tue Aug 14 15:12:01 2007 +0200
16622 POST: Fix merge problem
16624 Signed-off-by: Stefan Roese <sr@denx.de>
16626 commit 429d9571f60631ae8a2fe12b11be4c75b0c2b37c
16627 Author: Stefan Roese <sr@denx.de>
16628 Date: Tue Aug 14 15:03:17 2007 +0200
16630 Coding style cleanup
16632 Signed-off-by: Stefan Roese <sr@denx.de>
16634 commit 779e975117a75e91fcebe226a63104dbfb924ab1
16635 Author: Stefan Roese <sr@denx.de>
16636 Date: Tue Aug 14 14:44:41 2007 +0200
16638 ppc4xx: Add initial Zeus (PPC405EP) board support
16640 Signed-off-by: Stefan Roese <sr@denx.de>
16642 commit c5a172a5fd636c12467429e3f7910e53773979c6
16643 Author: Stefan Roese <sr@denx.de>
16644 Date: Tue Aug 14 14:41:55 2007 +0200
16646 POST: Add option for external ethernet loopback test
16648 When CFG_POST_ETHER_EXT_LOOPBACK is defined, the ethernet POST
16649 is not done using an internal loopback connection, but by assuming
16650 that an external loopback connector is plugged into the board.
16652 Signed-off-by: Stefan Roese <sr@denx.de>
16654 commit eb2b4010ae426245172988804ee8d9193fb41038
16655 Author: Stefan Roese <sr@denx.de>
16656 Date: Tue Aug 14 14:39:44 2007 +0200
16658 POST: Add ppc405 support to cache and UART POST
16660 Signed-off-by: Stefan Roese <sr@denx.de>
16662 commit 0c42f36f15074bd9808a7dbd7ef611fad9bf537c
16663 Author: Peter Pearse <peter.pearse@arm.com>
16664 Date: Tue Aug 14 10:46:32 2007 +0100
16666 Replace lost end of at45.c.
16668 commit 65d7ada64557e76094b4fd3bad30a0f18f5fb2b2
16669 Author: Peter Pearse <peter.pearse@arm.com>
16670 Date: Tue Aug 14 10:30:06 2007 +0100
16672 Update Makefiles for merged and split at45.c.
16674 commit 3454cece2db57cb9eb7087995f7e73066a163f71
16675 Author: Peter Pearse <peter.pearse@arm.com>
16676 Date: Tue Aug 14 10:21:06 2007 +0100
16678 Delete the merged files.
16680 commit dcbfd2e5649f97aa04fbbc6ea2b008aa4486e225
16681 Author: Peter Pearse <peter.pearse@arm.com>
16682 Date: Tue Aug 14 10:14:05 2007 +0100
16686 commit d4fc6012fd0a5c211b825691f44b06f8032c0551
16687 Author: Peter Pearse <peter.pearse@arm.com>
16688 Date: Tue Aug 14 10:10:52 2007 +0100
16690 Add MACH_TYPE records for several AT91 boards.
16691 Merge to two at45.c files into a common file, split to at45.c and spi.c
16692 Fix spelling error in DM9161 PHY Support.
16693 Initialize at91rm9200 board (and set LED).
16694 Add PIO control for at91rm9200dk LEDs and Mux.
16695 Change dataflash partition boundaries to be compatible with Linux 2.6.
16697 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
16698 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
16700 commit 4ef35e53c693556c54b0c22d6f873de87bade253
16701 Author: Wolfgang Denk <wd@denx.de>
16702 Date: Tue Aug 14 09:54:46 2007 +0200
16704 Coding style cleanup, update CHANGELOG
16706 Signed-off-by: Wolfgang Denk <wd@denx.de>
16708 commit 85eb5caf6b906f7ec5b54814e8c7c74f55986bb7
16709 Author: Wolfgang Denk <wd@denx.de>
16710 Date: Tue Aug 14 09:47:27 2007 +0200
16712 Coding style cleanup; rebuild CHANGELOG
16714 commit 7f3f2bd2dc08e0b05e185662ca2e2d283757104a
16715 Author: Randy Vinson <rvinson@linuxbox.(none)>
16716 Date: Tue Feb 27 19:42:22 2007 -0700
16718 85xxCDS: Add make targets for legacy systems.
16720 The PCI ID select values on the Arcadia main board differ depending
16721 on the version of the hardware. The standard configuration supports
16722 Rev 3.1. The legacy target supports Rev 2.x.
16724 Signed-off-by Randy Vinson <rvinson@mvista.com>
16726 commit e41094c7e38177c755fbd9b182018069614f080d
16727 Author: Andy Fleming <afleming@freescale.com>
16728 Date: Tue Aug 14 01:50:09 2007 -0500
16730 85xxCDS: Enable the VIA PCI-to-ISA bridge.
16732 Author: Randy Vinson <rvinson@linuxbox.(none)>
16734 Enable the PCI-to-ISA bridge in the VIA Southbridge located on the
16735 Arcadia main board.
16737 Signed-off-by: Randy Vinson <rvinson@mvista.com>
16738 Signed-off-by: York Sun <yorksun@freescale.com>
16740 commit da9d4610d76e52c4d20a8f3d8433439a7fcf5b71
16741 Author: Andy Fleming <afleming@freescale.com>
16742 Date: Tue Aug 14 00:14:25 2007 -0500
16744 Add support for UEC to 8568
16746 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
16747 Signed-off-by: Andy Fleming <afleming@freescale.com>
16749 commit c59e4091ffe0148398b9e9ff14a019ea038b7432
16750 Author: Haiying Wang <Haiying.Wang@freescale.com>
16751 Date: Tue Jun 19 14:18:34 2007 -0400
16753 Add PCI support for MPC8568MDS board
16755 This patch is against u-boot-mpc85xx.git of www.denx.com
16757 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
16758 Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com>
16760 commit d111d6382c99fdea08c2312eeeae8786945e189a
16761 Author: Haiying Wang <Haiying.Wang@freescale.com>
16762 Date: Tue Jun 19 14:18:32 2007 -0400
16764 Empirically set cpo and clk_adjust for mpc85xx DDR2 support
16766 This patch is against u-boot-mpc85xx.git of www.denx.com
16768 Setting cpo to 0x9 for frequencies higher than 333MHz is verified on
16769 both MPC8548CDS board and MPC8568MDS board, especially for supporting
16772 Setting clk_adjust to 0x6(3/4 late cycle) for MPC8568MDS board is for
16773 DDR2 on all current board versions especially ver 1.92 or later to bring
16776 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
16778 commit 3db0bef59eab1155801618cef5c481e97553b597
16779 Author: Kumar Gala <galak@kernel.crashing.org>
16780 Date: Tue Aug 7 18:07:27 2007 -0500
16782 Use an absolute address when jumping out of 4k boot page
16784 On e500 when we leave the 4k boot page we should use an absolute address since
16785 we don't know where the board code may want us to be really running at.
16787 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16789 commit 39980c610c9a4c381907c9e1d1b9c0e1c0dca57a
16790 Author: Andy Fleming <afleming@freescale.com>
16791 Date: Mon Aug 13 14:49:59 2007 -0500
16793 MPC85xx BA bits not set for 3-bit bank address DIMM
16795 The current implementation does not set the number of bank address bits
16796 (BA) in the processor. The default assumes 2 logical bank bits. This
16797 works fine for a DIMM that uses devices with 4 internal banks (SPD
16798 byte17 = 0x4) but needs to be set appropriately for a DIMM that uses
16799 devices with 8 internal banks (SPD byte17 = 0x8).
16801 Signed-off-by: Greg Davis <DavisG@embeddedplanet.com>
16803 commit 6c543597bb4b1ecf5d8589f7abb0f39929fb7fd1
16804 Author: Andy Fleming <afleming@freescale.com>
16805 Date: Mon Aug 13 14:38:06 2007 -0500
16807 Fix minor 85xx warnings
16809 Some patches had inserted warnings into the build:
16810 * mpc8560ads declared data without using it
16811 * cpu_init declared ecm and immap without using it in all CONFIGs
16812 * MPC8548CDS.h had its default filenames changed so that they contained
16813 "\m" in the paths. Made the defaults not Windows-specific (or
16816 Signed-off-by: Andy Fleming <afleming@freescale.com>
16818 commit f2cff6b104f82b993bef6086ce0c97159bbe1add
16819 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
16820 Date: Fri Jul 27 01:50:52 2007 -0500
16822 8548cds PCIE support.
16824 Make the early L1 cache stack region guarded to prevent speculative
16825 fetches outside the locked range.
16827 Use _PHYS defines, not _MEM for cpu-side PCI memory mapped regions.
16828 init.S whitespace cleanup.
16830 Allow TEXT_BASE value to be specified on command line. This allows it
16831 to be set to 0xfffc0000 which cuts the uboot binary in half.
16833 Clear and enable lbc and ecm errors.
16835 Update last_busno in device-tree for pci and pcie.
16837 Remove load of obsolete cpu/mpc85xx/pci.0
16839 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
16840 Acked-by: Andy Fleming <afleming@freescale.com>
16842 commit 837f1ba05cfb248aba5ab8e1fb1bfeefa07d5962
16843 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
16844 Date: Fri Jul 27 01:50:51 2007 -0500
16846 8544ds PCIE support
16848 PCI1 LAW mapping should use CFG_PCI1_MEM_PHY and not _BASE address.
16850 Enable LBC and ECM errors and clear error registers.
16852 Add tftpflash env var to get uboot from tftp server and flash it.
16854 Add pci/pcie convenience env vars to display register space:
16855 "run pcie3regs" to see all pcie3 ccsr registers
16856 "run pcie3cfg" to see all cfg registers
16857 Whitespace cleanup and MPC8544DS.h
16859 Enable CONFIG_INTERRUPTS.
16861 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
16862 Acked-by: Andy Fleming <afleming@freescale.com>
16864 commit 61a21e980a7b9188424d04f1c265fdc5c21c7e85
16865 Author: Andy Fleming <afleming@freescale.com>
16866 Date: Tue Aug 14 01:34:21 2007 -0500
16868 85xx start.S cleanup and exception support
16870 From: Ed Swarthout <Ed.Swarthout@freescale.com>
16872 Support external interrupts from platform to eliminate system hangs.
16873 Define CONFIG_INTERRUPTS board configure option to enable.
16874 Enable ecm, ddr, lbc, and pci/pcie error interrupts in PIC.
16876 Remove extra cpu initialization redundant with hardware initialization.
16877 Whitespace cleanup.
16879 Define and use _START_OFFSET consistent with other processors using
16882 Move additional code from .text to boot page to make room for
16883 exception vectors at start of image.
16885 Handle Machine Check, External and Critical exceptions.
16887 Fix e500 machine check error determination in traps.c
16889 TEXT_BASE can now be 0xfffc_0000 - which cuts binary image in half.
16891 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
16892 Acked-by: Andy Fleming <afleming@freescale.com>
16894 commit 7bd30fc4a6475b41d6679ae3aafc9fa505260c47
16895 Author: Andy Fleming <afleming@freescale.com>
16896 Date: Tue Aug 14 01:33:18 2007 -0500
16898 Add MPC8544DS README
16900 Signed-off-by: Andy Fleming <afleming@freescale.com>
16902 commit 40c7f9b0de4e300370adfc704128fa0f79a143b6
16903 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
16904 Date: Fri Jul 27 01:50:48 2007 -0500
16906 85xx allow debugger to configure ddr.
16908 Only check for mpc8548 rev 1 when compiled for 8548.
16910 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
16911 Acked-by: Andy Fleming <afleming@freescale.com>
16913 commit 29372ff38c5baab7d0e3a8c14fe11fa194a38704
16914 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
16915 Date: Fri Jul 27 01:50:47 2007 -0500
16917 mpc85xx L2 cache reporting and SRAM relocation option.
16919 Allow debugger to override flash cs0/cs1 settings to enable alternate
16922 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
16923 Acked-by: Andy Fleming <afleming@freescale.com>
16925 commit 41f0f8fb1ab92f0cba7d329de90070f822f8299f
16926 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
16927 Date: Fri Jul 27 01:50:46 2007 -0500
16929 e500 needs ppc_asm.tmp MCK_EXCEPTION
16931 Always define MCK_EXCEPTION macro - so e500 can use it too.
16933 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
16934 Acked-by: Andy Fleming <afleming@freescale.com>
16936 commit 53a5c424bf8655b7b4e2c305a441963259a26a81
16937 Author: David Updegraff <dave@cray.com>
16938 Date: Mon Jun 11 10:41:07 2007 -0500
16940 multicast tftp: RFC2090
16942 Implemented IETF RFC2090, Multicast TFTP. Initial implementation
16943 on Realtek RTL8139 and Freescale TSEC.
16945 Signed-off-by: David Updegraff <dave@cray.com>
16946 Signed-off-by: Ben Warren <bwarren@qstreams.com>
16948 commit 5d110f0aa69f065ee386ec1840dfee1e8cc46bc1
16949 Author: Wilson Callan <wcallan@savantav.com>
16950 Date: Sat Jul 28 10:56:13 2007 -0400
16952 New CONFIG_BOOTP_SERVERIP option
16954 Added CONFIG_BOOTP_SERVERIP to allow the tftp server to be different
16955 from the bootp server
16957 Signed-off-by: Wilson Callan <wcallan@savantav.com>
16958 Signed-off-by: Ben Warren <bwarren@qstreams.com>
16960 commit 50cca8b976ec74069860208c36e64ce8f4d5e4c1
16961 Author: Mike Rapoport <mike@compulab.co.il>
16962 Date: Sun Aug 12 08:48:27 2007 +0300
16964 Add ability to take MAC address from the environment to DM9000 driver
16966 Signed-off-by: Mike Rapoport <mike@compulab.co.il>
16967 Signed-off-by: Ben Warren <bwarren@qstreams.com>
16969 commit be5d72d10d47609326226225181e301fb9a33b58
16970 Author: Wolfgang Denk <wd@denx.de>
16971 Date: Mon Aug 13 21:57:53 2007 +0200
16973 Minor coding style cleanup. Update CHANGELOG.
16975 Signed-off-by: Wolfgang Denk <wd@denx.de>
16977 commit cca34967cbd13ff6bd352be29e3f1cc88ab24c05
16978 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
16979 Date: Sat Aug 11 06:54:58 2007 -0500
16981 Modify SBC8641D to use new Freescale PCI routines
16983 PCI-Express sockets 1 and 2 verified working with Intel Pro/1000 PT
16986 Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
16987 Signde-off-by: Jon Loeliger <jdl@freescale.com>
16989 commit a08458303e7f9db67f296980036d3292c35cb45c
16990 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
16991 Date: Fri Jun 29 18:38:51 2007 +0200
16993 atmel_mci: Fix data timeout value
16995 Calculate the data timeout based on values from the CSD instead of
16996 just using a hardcoded DTOR value. This is a backport of a similar fix
16997 in BSP 2.0, with one additional fix: the DTOCYC value is rounded up
17000 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17002 commit 0ba8eed28b575626b17e0a7882f923b83e0d7584
17003 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17004 Date: Mon Aug 13 17:22:31 2007 +0200
17006 AVR32: Include <div64.h> instead of <asm/div64.h>
17008 include/asm-avr32/div64.h was recently moved to include/div64.h, but
17009 cpu/at32ap/interrupts.c wasn't properly updated (an earlier version of
17010 the patch was merged perhaps?)
17012 This patch updates cpu/at32ap/interrupts.c so that the avr32 port
17015 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17017 commit f0d1246ed7cb5a88522244c596d7ae7e6f161283
17018 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17019 Date: Wed Jun 27 13:34:26 2007 +0200
17021 atmel_mci: Use 512 byte blocksize if possible
17023 Instead of always using the largest blocksize the card supports, check
17024 if it can support smaller block sizes and use 512 bytes if possible.
17025 Most cards do support this, and other parts of u-boot seem to have
17026 trouble with block sizes different from 512 bytes.
17028 Also enable underrun/overrun protection.
17030 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17031 Acked-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
17033 commit 273db7e1bdd1937e32f1d4507321bb721ebd3118
17034 Author: Stefan Roese <sr@denx.de>
17035 Date: Mon Aug 13 09:05:33 2007 +0200
17037 ppc4xx: Fix problem in PLL clock calculation
17039 This patch was originall provided by David Mitchell <dmitchell@amcc.com>
17040 and fixes a bug in the PLL clock calculation.
17042 Signed-off-by: Stefan Roese <sr@denx.de>
17044 commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b
17045 Author: Wolfgang Denk <wd@denx.de>
17046 Date: Sun Aug 12 21:34:50 2007 +0200
17050 commit 77d19a8bf3b0b1e401cb9f23c81e2ef419705c1a
17051 Author: Wolfgang Denk <wd@denx.de>
17052 Date: Sun Aug 12 21:34:34 2007 +0200
17054 Minor alignment of output, 2nd try.
17055 Also update CHANGELOG
17057 Signed-off-by: Wolfgang Denk <wd@denx.de>
17059 commit 6b309f22a724fad8418e811751a0741b893419cf
17060 Author: Wolfgang Denk <wd@denx.de>
17061 Date: Sun Aug 12 20:35:49 2007 +0200
17063 Minor alignment of output
17065 Signed-off-by: Wolfgang Denk <wd@denx.de>
17067 commit 6f6d7b9c8559e241e8d232621542b8b59699b07b
17068 Author: Wolfgang Denk <wd@denx.de>
17069 Date: Sun Aug 12 18:28:18 2007 +0200
17071 Cleanup output on ADS5121 board
17073 Signed-off-by: Wolfgang Denk
17075 commit a4d2636f2a859245ed3a401f26189da2dfda4ceb
17076 Author: Wolfgang Denk <wd@denx.de>
17077 Date: Sun Aug 12 15:11:38 2007 +0200
17079 Adapt board configuration and fix kernel crash on MCC200 board.
17081 The update procedure was modified to turn off the USB subsystem
17082 before exit for MCC200 and TRAB. This is necessary as otherwise the
17083 USB controller continues to write periodically to system memory!
17085 MCC200-specific notes:
17086 - the patch disables the magic key check for MCC200
17087 - the patch contains the configuration changes made
17088 for the new revision of the board.
17090 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
17091 Signed-off-by: Wolfgang Denk <wd@denx.de>
17093 commit e27f3a6efb9db5a533223b05c629ff4ac8d921bf
17094 Author: Wolfgang Denk <wd@denx.de>
17095 Date: Sun Aug 12 14:47:54 2007 +0200
17097 Adjust default configuration of ADS5121 board.
17099 Signed-off-by: Wolfgang Denk <wd@denx.de>
17101 commit afaac86fe2948ac84cd9a12bbed883b3c683e7d9
17102 Author: Wolfgang Denk <wd@denx.de>
17103 Date: Sun Aug 12 14:27:39 2007 +0200
17105 Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues.
17107 Signed-off-by: Wolfgang Denk <wd@denx.de>
17109 commit 5fe6be6208dda852c3564e384bd78d75784dea3e
17110 Author: Gerald Van Baren <vanbaren@cideas.com>
17111 Date: Tue Aug 7 21:14:22 2007 -0400
17113 Improve error print messages.
17115 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
17117 commit 99dffca3b7590a16a00bc475c860b67b2a3f1462
17118 Author: Kim Phillips <kim.phillips@freescale.com>
17119 Date: Tue Jul 17 13:57:04 2007 -0500
17121 fdt: allow for builds that don't want env and bd_t nodes
17123 protect fdt_env and fdt_bd_t invocations, fix codingstyle while in the
17126 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17128 commit 91148bf7aeba142d6f348805db7625db7da64d6f
17129 Author: Kim Phillips <kim.phillips@freescale.com>
17130 Date: Tue Jul 17 13:56:53 2007 -0500
17132 fdt: do board setup based on fdt address specified on bootm line
17134 The last fdt patch to bootm did board setup based on the address
17135 specified by a prior fdt address command invocation. The bootm
17136 code, as its call to fdt_chosen does, should use the fdt specified
17137 by the user on the bootm command. Note this restores full
17138 functionality for the 8360's existing default boot environment
17139 values, e.g. 'run nfsboot' (i.e. no having to 'fdt addr $fdtaddr'
17140 before booting a kernel).
17142 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17144 commit e125a2ffc209dd34794e326c7175658253beadf3
17145 Author: Gerald Van Baren <vanbaren@cideas.com>
17146 Date: Tue Jul 10 20:40:39 2007 -0400
17148 Call ft_board_setup() from the bootm command.
17150 In the patch titled "Create new fdt boardsetup command..." I removed the
17151 call to ft_board_setup() from the routine fdt_chosen(), but I forgot
17152 to add a direct call back into cmd_bootm.c
17154 This fixes the oversight by adding the direct call to the bootm command.
17156 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
17158 commit fd61e55dd8cb52ce3ff91b3917af26e24b6b0845
17159 Author: Gerald Van Baren <vanbaren@cideas.com>
17160 Date: Mon Jun 25 23:25:28 2007 -0400
17162 Create new fdt boardsetup command, fix bug parsing [] form of set values.
17164 Previously ft_board_setup() was called by fdt_chosen() which was not
17165 really correctly structured. This splits ft_board_setup() out by creating
17166 a new fdt boardsetup command.
17168 Fix a bug when parsing fdt set command values which have the square
17169 bracket form [00 11 22 33] - the length was updated incorrectly in when
17172 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
17174 commit 6f35ded9e85493595e0eb66a82b502a95326d049
17175 Author: Gerald Van Baren <vanbaren@cideas.com>
17176 Date: Mon Jun 25 20:55:58 2007 -0400
17178 Tighten up the error messages.
17180 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
17182 commit c45874b05aae897a6c29d1a97d4bb708fca2756c
17183 Author: Gerald Van Baren <vanbaren@cideas.com>
17184 Date: Mon Jun 25 19:52:23 2007 -0400
17186 Asthetic improvements: error messages and line lengths.
17188 Tighten up the error messages, split overlength lines.
17190 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
17192 commit 35ec398f16e17df600edc1b38c1e9e62c15c9aa1
17193 Author: Gerald Van Baren <vanbaren@cideas.com>
17194 Date: Fri May 25 22:08:57 2007 -0400
17196 Fix fdt_chosen() to call ft_board_setup(), clean up long lines.
17198 The fdt_chosen() function was adding/seting some properties ad-hoc
17199 improperly and duplicated (poorly) what was done in ft_board_setup()
17201 Clean up long lines (setting properties, printing errors).
17203 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
17205 commit 06e19a07701c968f15d72c083b5872a1a11c7b01
17206 Author: Gerald Van Baren <vanbaren@cideas.com>
17207 Date: Mon May 21 23:27:16 2007 -0400
17209 For fdt_find_node_by_path(), handle the root path properly.
17211 Also removes the special case root path detection in cmd_fdt.c since it
17212 is no longer necessary.
17214 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
17216 commit 9675ee7208ab965d13ea8d8262d77ac4160ef549
17217 Author: Gerald Van Baren <vanbaren@cideas.com>
17218 Date: Thu May 17 23:54:36 2007 -0400
17220 Add fdt_find_node_by_type() and fdt_find_compatible_node() to LIBFDT
17222 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
17223 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
17225 commit 1a861169bc3758f9de3aead62b058736c6891246
17226 Author: Gerald Van Baren <vanbaren@cideas.com>
17227 Date: Wed Jun 6 22:47:58 2007 -0400
17229 Replace fdt_node_offset() with fdt_find_node_by_path().
17231 The new name matches more closely the kernel's name, which is also
17232 a much better description.
17234 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
17235 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
17237 commit addd8ce83078c25f0eca5f23adbdfc64ca50a243
17238 Author: Gerald Van Baren <vanbaren@cideas.com>
17239 Date: Wed May 16 22:39:59 2007 -0400
17241 Fix cmd_fdt line lengths, refactor code.
17243 Break lines that were greater than 80 characters in length.
17244 Move the fdt print and property parsing code to separate static functions
17245 to reduce coding clutter in the fdt_cmd handling body.
17247 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
17249 commit 25114033ab21788810c48ba4df103b649da1223b
17250 Author: Gerald Van Baren <vanbaren@cideas.com>
17251 Date: Sat May 12 09:47:25 2007 -0400
17253 FDT command improvements.
17255 Fix "fdt set" so that it will create a non-existing property.
17256 Add "fdt mknode" to create nodes.
17258 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
17260 commit 38eb508e8e811e2e57628f445de3a24a23c7d804
17261 Author: Gerald Van Baren <vanbaren@cideas.com>
17262 Date: Sat May 12 09:45:46 2007 -0400
17264 Reorganize and fix problems (returns) in the bootm command.
17266 Do *NOT* return after the "point of no return" has been passed.
17267 If something goes wrong, the board must be reset after that point.
17268 Move the "Transferring control to Linux" debug message back to where it
17269 belongs: just before transferring control to linux.
17271 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
17273 commit 89c8757d8f213c47709bdc4efe0695263a6080a6
17274 Author: Gerald Van Baren <vanbaren@cideas.com>
17275 Date: Tue May 8 21:27:35 2007 -0400
17277 Fix bugs in the CONFIG_OF_LIBFDT
17279 Stupid coding mistakes (identified by Timur Tabi, thanks).
17281 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
17283 commit 6be07cc1ca458278c85ecdbf1a0536cff4c701ec
17284 Author: Gerald Van Baren <vanbaren@cideas.com>
17285 Date: Wed Apr 25 22:47:15 2007 -0400
17287 Improve fdt move length handling.
17289 Make the length parameter optional: if not specified, do the move using
17290 the current size unchanged.
17292 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
17294 commit bb930e76fea6cf89ca2d98e2f7c7a6043d79327d
17295 Author: Gerald Van Baren <vanbaren@cideas.com>
17296 Date: Wed Apr 25 22:23:36 2007 -0400
17298 Minor code clean up.
17300 Declare the variable fdt properly as extern.
17301 Call the "set_fn" function pointer the "short way" without the full
17302 dereferencing syntax.
17304 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
17306 commit ba24e2ac3bdb5c489f3c787e7542b6474c4d65c6
17307 Author: Gerald Van Baren <vanbaren@cideas.com>
17308 Date: Wed Apr 25 21:24:27 2007 -0400
17310 Improve error messages, more informative.
17312 Print more than the raw libfdt error message strings. This is especially
17313 useful for cluing in the user when the bootm command aborts due to
17316 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
17318 commit 8096b3b8f772c1894ddeda9dbceff6a8826473a4
17319 Author: Gerald Van Baren <vanbaren@cideas.com>
17320 Date: Fri Apr 20 22:46:53 2007 -0400
17322 libfdt: Conditionally compile based on CONFIG_OF_LIBFDT
17324 This is the way u-boot reduces configured-out code. At Wolfgang
17325 Grandegger and Wolfgang Denk's request, make libfdt conform.
17327 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
17329 commit 923efd286411ed052d9e074f59f8986d6081061c
17330 Author: Bruce Adler <bruce.adler@ccpu.com>
17331 Date: Fri Aug 10 14:54:47 2007 -0700
17333 add image size and descriptors for Spartan 3E FPGA chips
17335 Spartan 3E image sizes taken from Table 1-4 in Xilinx UG332 (v1.1)
17337 Signed-off by: Bruce Adler <bruce.adler@ccpu.com>
17339 commit fb56579ffe7ef3275b7036bb7b924e5a0d32bd70
17340 Author: Kim Phillips <kim.phillips@freescale.com>
17341 Date: Fri Aug 10 15:34:48 2007 -0500
17343 make MAKEALL more immune to merge conflicts
17345 ..by placing board entries one per line, as suggested by jdl.
17347 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17349 commit 2628114ec564f969f34b5f7105fbd168cb8c9c3f
17350 Author: Kim Phillips <kim.phillips@freescale.com>
17351 Date: Fri Aug 10 13:28:25 2007 -0500
17353 README: Remove outdated cpu type, board type, and NAME_config lists
17355 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17357 commit 49bb59912d21aacb507eb81fd21fb7af650c706c
17358 Author: Dave Liu <r63238@freescale.com>
17359 Date: Fri Aug 10 15:48:59 2007 +0800
17361 mpc83xx: Suppress the warning 'burstlen'
17363 suppress the warning 'burstlen' of spd_sdram.
17365 Signed-off-by: Dave Liu <daveliu@freescale.com>
17367 commit c646bba6465a45c60746d4cc1602cd06c1960f2d
17368 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
17369 Date: Thu Aug 9 15:11:03 2007 -0500
17371 Add support for SBC8641D. Config files.
17373 Add support for Wind River's SBC8641D reference board.
17375 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
17376 Acked-by: Wolfgang Denk <wd@denx.de>
17377 Acked-by: Jon Loeliger <jdl@freescale.com>
17379 commit 8ac273271d57321f90505c7a51cdb1ef2113b628
17380 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
17381 Date: Thu Aug 9 15:10:53 2007 -0500
17383 Add support for SBC8641D. Board files.
17385 Add support for Wind River's SBC8641D reference board.
17387 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
17388 Acked-by: Wolfgang Denk <wd@denx.de>
17389 Acked-by: Jon Loeliger <jdl@freescale.com>
17391 commit c2c0ab4aff86622b837a48a0e560351f9afafb95
17392 Author: Stefan Roese <sr@denx.de>
17393 Date: Fri Aug 10 20:34:58 2007 +0200
17395 Conding style cleanup
17397 Signed-off-by: Stefan Roese <sr@denx.de>
17399 commit c74b2108e31fe09bd1c5d291c3cf360510d4f13e
17400 Author: Sergey Kubushyn <ksi@koi8.net>
17401 Date: Fri Aug 10 20:26:18 2007 +0200
17403 [ARM] TI DaVinci support, hopefully final
17405 Add support for the following DaVinci boards:
17412 - Split into separate board directories
17413 - Removed changes to MTD_DEBUG (or whatever it's called)
17414 - New CONFIG_CMD party line followed
17415 - Some cosmetic fixes, cleanup etc.
17416 - Patches against the latest U-Boot tree as of now.
17417 - Fixed CONFIG_CMD_NET in net files.
17418 - Fixed CONFIG_CMD_EEPROM for schmoogie.
17419 - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
17420 DV_EVM. Can't check if it works on SONATA, don't have a board any more,
17421 but it at least compiles.
17423 Here is an excerpt from session log on SCHMOOGIE...
17425 U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17)
17434 ETH PHY : DP83848 @ 0x01
17436 Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
17437 U-Boot > ping 192.168.253.10
17438 host 192.168.253.10 is alive
17441 Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
17442 Acked-by: Dirk Behme <dirk.behme@gmail.com>
17443 Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
17444 Acked-by: Stefan Roese <sr@denx.de>
17446 commit 2e4d94f1e3c2961428967a33b6ff2520568391b3
17447 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
17448 Date: Fri Jul 27 01:50:45 2007 -0500
17450 fsl_pci_init cleanup.
17452 Do not enable normal errors created during probe (master abort, perr,
17453 and pcie Invalid Configuration access).
17455 Add CONFIG_PCI_NOSCAN board option to prevent bus scan.
17457 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
17458 Acked-by: Andy Fleming <afleming@freescale.com>
17460 commit 936b3e69b667c3eb9a61ece4e78647d3fce9fc2a
17461 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
17462 Date: Fri Jul 27 01:50:44 2007 -0500
17464 pciauto_setup_device bars_num fix
17466 Passing bars_num=0 to pciauto_setup_device should assign no bars.
17468 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
17469 Acked-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
17470 Acked-by: Andy Fleming <afleming@freescale.com>
17472 commit cf0b185e58ca0aec8ae2b2a8804ec0ef58ee21d4
17473 Author: Jon Loeliger <jdl@freescale.com>
17474 Date: Mon Aug 6 17:39:44 2007 -0500
17476 8641hpcn: Do correct sized pointer math.
17478 When I rebased Ed's patch and cleaned up a few compilation
17479 problems, I apparently rebased my brain on crack first.
17480 Fix that by doing (char *) sized pointer math as needed.
17482 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17484 commit cfc7a7f5bb3273c9951173c788001d45118f141f
17485 Author: Jon Loeliger <jdl@freescale.com>
17486 Date: Thu Aug 2 14:42:20 2007 -0500
17490 Remove rev 1 fixes.
17491 Always set PICGCR_MODE.
17492 Enable machine check and provide board config option
17493 to set and handle SoC error interrupts.
17495 Include MSSSR0 in error message.
17497 Isolate a RAMBOOT bit of code with #ifdef CFG_RAMBOOT.
17499 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
17500 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17502 commit 35d22f957a85a22bb3cd1ad084fa5404620d1c42
17503 Author: Stefan Roese <sr@denx.de>
17504 Date: Fri Aug 10 10:42:25 2007 +0200
17506 Coding style cleanup
17508 Signed-off-by: Stefan Roese <sr@denx.de>
17510 commit 3a6d56c20989fe27360afe743bd2a7ad4d76e48f
17511 Author: Dirk Behme <dirk.behme@googlemail.com>
17512 Date: Thu Aug 2 17:42:08 2007 +0200
17514 Make use of generic 64bit division in nand_util.c
17516 Use generic 64bit division in nand_util.c. This makes nand_util.c
17517 independent of any toolchain 64bit division.
17519 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
17521 commit f7c086e94e8ce9aad7268af97f73aa6884686f27
17522 Author: Dirk Behme <dirk.behme@googlemail.com>
17523 Date: Thu Aug 2 17:41:14 2007 +0200
17525 Move 64bit division from avr32 to generic lib
17527 Move the 64bit division from lib_avr32 to lib_generic. With this, all
17528 boards can do_div/__div64_32 if needed, not only avr one. Code is put
17529 to lib_generic, so no larger memory footprint if not used. No code
17530 modifications. Thanks for proposal by HÃ¥vard Skinnemoen.
17532 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
17534 commit 157cda4d0c3d592ccbb19bbfc07d9251894f0894
17535 Author: Niklaus Giger <niklausgiger@gmx.ch>
17536 Date: Fri Jul 27 11:31:22 2007 +0200
17538 Add PPC4xx-HCU4 and HCU5 boards: HCU5 files
17540 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
17542 commit 6e5de26c6e7580faf16e87745cd488b92b492d0c
17543 Author: Niklaus Giger <niklausgiger@gmx.ch>
17544 Date: Fri Jul 27 11:30:33 2007 +0200
17546 Add PPC4xx-HCU4 and HCU5 boards: HCU4 files
17548 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
17550 commit e8397fc78c9394d71de233a4d810fbc9047e4c76
17551 Author: Niklaus Giger <niklausgiger@gmx.ch>
17552 Date: Fri Jul 27 11:38:26 2007 +0200
17554 Add PPC4xx-HCU4 and HCU5 boards: common files
17556 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
17558 commit ac982ea5a4f2f993efcf52dca122f5a59df047d8
17559 Author: Niklaus Giger <niklausgiger@gmx.ch>
17560 Date: Fri Jul 27 11:28:44 2007 +0200
17562 Add PPC4xx-HCU4 and HCU5 boards: make related
17564 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
17566 commit 137fdd9f474ecb853efdace5200576308c67f18d
17567 Author: Niklaus Giger <niklausgiger@gmx.ch>
17568 Date: Fri Jul 27 11:28:03 2007 +0200
17570 Add PPC4xx-HCU4 and HCU5 boards: HCU5 config
17572 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
17574 commit 714bc55b35b6f6a65cc8740a3842a543e88cdef2
17575 Author: Niklaus Giger <niklausgiger@gmx.ch>
17576 Date: Fri Jul 27 11:27:15 2007 +0200
17578 Add PPC4xx-HCU4 and HCU5 boards: HCU4 config
17580 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
17582 commit 1894dd381124bdbfbdae7cf3a6ca52a8eb1f4421
17583 Author: Niklaus Giger <niklausgiger@gmx.ch>
17584 Date: Fri Jul 27 11:25:31 2007 +0200
17586 Add PPC4xx-HCU4 and HCU5 boards: READMEs
17588 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
17590 commit 641cca9569ce351ddb287fd3343d8b1dcb591db4
17591 Author: Niklaus Giger <niklausgiger@gmx.ch>
17592 Date: Fri Jul 27 11:37:40 2007 +0200
17594 Add PPC4xx-HCU4 and HCU5 boards: Infrastructure
17596 This series of patches adds support for 2 boards from Netstal Maschinen.
17598 The HCU4 has a PPC405Gpr and
17599 the HCU5 has a PPC440EPX.
17601 The HCU4 has a somehow complicated flash setup, as the booteprom is
17602 only 8 bits and the CFI 16 bits wide, which makes it impossible to use a more
17605 The HCU5 has only a booteprom as the whole code will be downloaded from a
17606 different board which has HD, CD-ROM, etc and where all code is stored.
17608 This is my third try. I incorporated all suggestions made by Wolfgang and Stefan.
17611 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
17613 commit 3e4c90c6233618fc1806e63fde68df5f3d6a0171
17614 Author: Stefan Roese <sr@denx.de>
17615 Date: Fri Aug 10 08:42:55 2007 +0200
17617 ppc4xx: Update lwmon5 POST configuration
17619 Signed-off-by: Stefan Roese <sr@denx.de>
17621 commit 29cb25da56afe18cf5e7072a92a9d98ea8af1fd4
17622 Author: Yuri Tikhonov <yur@emcraft.com>
17623 Date: Fri Aug 10 08:25:22 2007 +0200
17625 POST: Add ppc4xx UART POST support without external uart clock (lwmon5)
17627 The patch adds support for UART POST on ppc44x-based boards with no
17628 external serial clocks installed.
17630 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
17631 Acked-by: Stefan Roese <sr@denx.de>
17633 commit 99c2fdab91bc633e46fb41dbaa629f87ccf6e00f
17634 Author: Kim Phillips <kim.phillips@freescale.com>
17635 Date: Mon Aug 6 18:18:34 2007 -0500
17637 mpc83xx: fix ITX[GP] O=builddir builds
17639 make: *** No rule to make target `/work/wd/tmp/board/mpc8349itx/u-boot.lds', needed by `/work/wd/tmp/u-boot'. Stop.
17641 Both the ITX and ITX-GP fail when you use "make O=<some dir> ..." or
17642 "BUILD_DIR=<some dir> ./MAKEALL ..."
17644 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17646 commit 47e8bc846759e037b8af0e5f9c9f9cfa7a1050c3
17647 Author: Dave Liu <r63238@freescale.com>
17648 Date: Wed Aug 1 15:00:59 2007 +0800
17650 mpc83xx: Correct the README for DDR ECC
17652 Update the README for DDR ECC, change the name
17653 to README.mpc83xx.ddrecc.
17655 Signed-off-by: Dave Liu <daveliu@freescale.com>
17656 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17658 commit daab8c67d2defef73dc26ab07f0c3afd1b05d019
17659 Author: Dave Liu <r63238@freescale.com>
17660 Date: Wed Aug 1 15:00:15 2007 +0800
17662 mpc83xx: Consolidate the ECC support of 83xx
17664 Remove the duplicated source code of ecc command on the <board>.c,
17665 for reused, move these code to cpu/mpc83xx directory.
17667 Signed-off-by: Dave Liu <daveliu@freescale.com>
17668 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17670 commit 036575c544cf1b69654d8fb334bda69c6ff3da36
17671 Author: Dave Liu <r63238@freescale.com>
17672 Date: Sat Aug 4 13:37:39 2007 +0800
17674 mpc83xx: Correct the burst length for DDR2 with 32 bits
17676 The burst length should be 4 for DDR2 with 32 bits bus
17678 Signed-off-by: Dave Liu <daveliu@freescale.com>
17680 commit 1c274c4e05b6dc9b24edc8aa618b02f607ee6eed
17681 Author: Kim Phillips <kim.phillips@freescale.com>
17682 Date: Wed Jul 25 19:25:33 2007 -0500
17684 mpc83xx: add support for the MPC8323E RDB
17686 MPC8323E based board with 64MB fixed SDRAM, 16MB flash,
17687 five 10/100 ethernet ports connected via an ICPlus IP175C
17688 switch, one PCI slot, and serial. Features not supported
17689 in this patch are SD card interface, 2 USB ports, and the
17692 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
17693 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17695 commit 343d91009d55fc5b3ff8cc940597af6c6aa1d359
17696 Author: Kim Phillips <kim.phillips@freescale.com>
17697 Date: Wed Jul 25 19:25:28 2007 -0500
17699 mpc83xx: fixup generic pci for libfdt
17701 add libfdt support to the generic 83xx pci code
17703 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17705 commit f57ac7a7b37109245b69db80839ebee26179966a
17706 Author: Kim Phillips <kim.phillips@freescale.com>
17707 Date: Wed Jul 25 19:25:22 2007 -0500
17709 mpc83xx: fix 8360 and cpu functions to update fdt being passed
17711 ..and not the global fdt. Rename local fdt vars to blob so as not to
17712 be confused with the global var with the same three-letter name.
17714 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17716 commit 8be404459a6b7395415a57bb35e8377e3b2b5acb
17717 Author: Jerry Van Baren <gvb.uboot@gmail.com>
17718 Date: Wed Jul 4 21:34:24 2007 -0400
17720 mpc83xx: Fix errors when CONFIG_OF_LIBFDT is enabled
17722 Several node strings were not correct (trailing slashes and properties
17724 Added setting of the timebase-frequency.
17725 Improved error messages and use debug() instead of printf().
17727 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
17728 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17730 commit 26d02c9bbac1751c5e19294f000100b48d43a920
17731 Author: Jerry Van Baren <gvb.uboot@gmail.com>
17732 Date: Wed Jul 4 21:27:30 2007 -0400
17734 mpc83xx: Replace fdt_node_offset() with fdt_find_node_by_path().
17736 The new name matches more closely the kernel's name, which is also
17737 a much better description.
17739 These are the mpc83xx changes made necessary by the function name change.
17741 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
17742 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
17743 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17745 commit 9be39a67c9f8fef7107f5df09d673005f04d0963
17746 Author: Dave Liu <daveliu@freescale.com>
17747 Date: Mon Jun 25 10:41:56 2007 +0800
17749 mpc83xx: Add support for the display of reset status
17751 83xx processor family has many reset sources, such as
17752 power on reset, software hard reset, software soft reset,
17753 JTAG, bus monitor, software watchdog, check stop reset,
17754 external hard reset, external software reset.
17755 sometimes, to figure out the fault of system, we need to
17756 know the cause of reset early before the prompt of
17759 Signed-off-by: Dave Liu <daveliu@freescale.com>
17760 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17762 commit ff9658d7049bf8c8e8e0a05dbe5e9f7e91aa5a5d
17763 Author: Dave Liu <daveliu@freescale.com>
17764 Date: Mon Jun 25 10:41:04 2007 +0800
17766 mpc83xx: Fix the align bug of SDMA buffer
17768 According to the latest user manual, the SDMA temporary
17769 buffer base address must be 4KB aligned.
17771 Signed-off-by: Dave Liu <daveliu@freescale.com>
17772 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17774 commit 66dc2c2dc51f8b88bb8e231bc80cd92eae1d6476
17775 Author: Dave Liu <daveliu@freescale.com>
17776 Date: Mon Jun 25 13:21:12 2007 +0800
17778 mpc83xx: Revise the MPC8360EMDS readme doc
17780 When the rev2.x silicon mount on the MPC8360EMDS baord,
17781 and if you are using the u-boot version after the commit
17782 3fc0bd159103b536e1c54c6f4457a09b3aba66ca.
17783 to make the ethernet interface usable, we have to setup
17784 the jumpers correctly.
17786 Signed-off-by: Dave Liu <daveliu@freescale.com>
17787 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17789 commit e739bc95797aac4fefc4c75b55c7c78e59d3ea9c
17790 Author: Timur Tabi <timur@freescale.com>
17791 Date: Tue Jul 3 13:46:32 2007 -0500
17793 FSL I2C driver programs the two I2C busses differently
17795 The i2c_init() function in fsl_i2c.c programs the two I2C busses differently.
17796 The second I2C bus has its slave address programmed incorrectly and is
17797 missing a 5-us delay.
17799 Signed-off-by: Timur Tabi <timur@freescale.com>
17800 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17802 commit df33f6b4d6d63693dd9200808b242de1b86cb8e8
17803 Author: Timur Tabi <timur@freescale.com>
17804 Date: Tue Jul 3 13:04:34 2007 -0500
17806 Update SCCR programming in cpu_init_f() to support all 83xx processors
17808 Update the cpu_init_f() function in cpu/mpc83xx/cpu_init.c to program the
17809 bitfields for all 83xx processors. The code to update some bitfields was
17810 compiled only on some processors. Now, the bitfields are programmed as long
17811 as the corresponding CFG_SCCR option is defined in the board header file.
17812 This means that the board header file should not define any CFG_SCCR macros
17813 for bitfields that don't exist on that processor, otherwise the SCCR will be
17814 programmed incorrectly.
17816 Signed-off-by: Timur Tabi <timur@freescale.com>
17817 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17819 commit 9546266999f0b9b51372636614211b88d90f0f25
17820 Author: Martin Krause <martin.krause@tqs.de>
17821 Date: Fri Jun 22 13:04:22 2007 +0200
17823 TQM834x: cleanup configuraton
17825 Remove irritating #undef DEBUG
17827 Signed-off-by: Martin Krause <martin.krause@tqs.de>
17828 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17830 commit 5d497e6bf0f5bf63729b4a47b3fd786d3c77a1bc
17831 Author: david.saada <David.Saada@ecitele.com>
17832 Date: Mon Jun 18 09:09:53 2007 -0700
17834 MPC83xx: Fix makefile to generate config.h file in the build directory
17836 MPC83xx: Fix the Makefile config sections to generate the include/config.h
17837 file in the build directory instead of the source directory.
17839 Signed-off-by: David Saada <david.saada@ecitele.com>
17840 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17842 commit 1ded0242e437259366792d52b7e9d1e1931d8fa5
17843 Author: Lee Nipper <Lee.Nipper@freescale.com>
17844 Date: Thu Jun 14 20:07:33 2007 -0500
17846 mpc83xx: Add support for 8360 silicon revision 2.1
17848 This change adds 8360 silicon revision 2.1 support to u-boot.
17850 Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
17851 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17853 commit a22806469a8f2b69c829f4fd5361fdebd0cb01b4
17854 Author: Kumar Gala <galak@kernel.crashing.org>
17855 Date: Wed Aug 8 04:14:28 2007 -0500
17857 Treat ppc64 host as ppc
17859 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17861 commit 0dc4279b08ff82472bec2e2c90858602459febe8
17862 Author: Jason Jin <Jason.jin@freescale.com>
17863 Date: Wed Aug 8 09:01:46 2007 +0800
17865 Minor fix for bios emulator makefile
17867 Add $(obj) to LIB avoiding objects be built in the source dir
17869 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
17871 commit ce981dc857adfc8036ca2f6d5d5a06c2a8aa77d6
17872 Author: Jason Jin <Jason.jin@freescale.com>
17873 Date: Wed Aug 8 08:33:11 2007 +0800
17875 Add CONFIG_BIOSEMU define to guard all the bios emulator code
17877 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
17879 This patch fix the compile issue on the board that did not enable the bios emulator
17881 commit ed8106433522f2ea8933e9808346860d061d7731
17882 Author: Zach Sadecki <Zach.Sadecki@ripcode.com>
17883 Date: Tue Jul 31 12:27:25 2007 -0500
17885 tsec: fix multiple PHY support
17887 The change entitled "Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx"
17888 broke multiple PHY support in tsec.c. This fixes it.
17890 Signed-off-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
17891 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17893 commit dcb84b7208ade0bbebbeb56bec9c2c64f8b2eede
17894 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
17895 Date: Thu Aug 9 09:08:18 2007 -0500
17897 tsec: Allow Ten Bit Interface address to be configurable
17899 Allow the address of the Ten Bit Interface (TBI) to be changed in the
17900 event of a conflict with another device.
17902 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
17904 commit 3ba4c2d68f6541db4677b4aea12071f56e6ff6e6
17905 Author: Stefan Roese <sr@denx.de>
17906 Date: Wed Aug 8 09:54:26 2007 +0200
17908 Coding style cleanup
17910 Signed-off-by: Stefan Roese <sr@denx.de>
17912 commit a41de1f0d373e09c782dea558385a06247111ba5
17913 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17914 Date: Sun Aug 5 05:15:18 2007 -0500
17916 Port enabled for I2C signals and chipselects port configuration.
17918 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17920 commit 1a33ce65a4c51a69190dd8c408f9e1c62a66e94f
17921 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17922 Date: Sun Aug 5 04:31:18 2007 -0500
17926 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17928 commit eaf9e447beb3e498818ef8ad0b8c1597cd506149
17929 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17930 Date: Sun Aug 5 04:11:20 2007 -0500
17934 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17936 commit 99c03c175d2689093176facf17c58ce2cb320001
17937 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17938 Date: Sun Aug 5 03:58:52 2007 -0500
17940 Changed CFG_CLK to gd->bus_clk for CFG_TIMER_PRESCALER. Added DECLARE_GLOBAL_DATA_PTR for time.c
17942 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17944 commit 8d1d66af54d305de29d0bbf4aa8c9e6375f7f731
17945 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17946 Date: Sun Aug 5 03:55:21 2007 -0500
17948 Added uart_gpio_conf() in serial_init(), seperated uart port configuration from cpu_init() to uart_gpio_conf()
17950 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17952 commit 6fde84a44b7e575ea80fe0e2d5be3b6f73d1e630
17953 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17954 Date: Sun Aug 5 03:43:30 2007 -0500
17956 Moved sync() from board file to include/asm-m68k/io.h
17958 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17960 commit 9e737d8476e7d6a596d16caaf6a3853a9a1190a2
17961 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17962 Date: Sun Aug 5 03:30:44 2007 -0500
17964 Declared attributes of void __mii_init(void) as an alias for int mii_init(void)
17966 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17968 commit 9998bd37ead85e93953559720710d3b0685c81e6
17969 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17970 Date: Sun Aug 5 03:19:10 2007 -0500
17972 Renamed CONFIG_MCFSERIAL to CONFIG_MCFUART
17974 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17976 commit 7c4c3722a38d40b0cf537ddae72b04f4088b190c
17977 Author: Jason Jin <Jason.jin@freescale.com>
17978 Date: Tue Aug 7 16:17:06 2007 +0800
17980 Add CONFIG_BIOSEMU define to guard all the bios emulator code
17982 This patch fix the compile issue on the board that did not enable the bios emulator
17984 commit bf1060ea4f9eaa7e7d164a70a7d6f28939882053
17985 Author: Wolfgang Denk <wd@denx.de>
17986 Date: Tue Aug 7 16:02:13 2007 +0200
17988 Fix missing brace error in fs/fat/fat.c
17989 [pointed out by Roderik Wildenburg]
17991 Signed-off-by: Wolfgang Denk <wd@denx.de>
17993 commit 706714d97a0d08d59eda4de2268c39f504688329
17994 Author: Michal Simek <monstr@monstr.eu>
17995 Date: Mon Aug 6 23:41:53 2007 +0200
17997 [FIX] remove cute code
17999 commit f500d9fdeb576288656dac427052ad2c5ca0ad1a
18000 Author: Michal Simek <monstr@monstr.eu>
18001 Date: Mon Aug 6 23:35:26 2007 +0200
18003 [FIX] Fix romfs code
18005 commit ab4b956d3143f8f8174089053f5dfabbb04762b0
18006 Author: Michal Simek <monstr@monstr.eu>
18007 Date: Mon Aug 6 23:31:49 2007 +0200
18009 [FIX] Coding style cleanup - Wolfgang's suggestions
18011 commit 6c33c78557ca6f8da68c01ce33e278695197d3f4
18012 Author: Wolfgang Denk <wd@denx.de>
18013 Date: Mon Aug 6 23:21:05 2007 +0200
18015 Fixed typo in README (pointed out by Martin Jost).
18017 Signed-off-by: Wolfgang Denk <wd@denx.de>
18019 commit 537223afa61f64480df31ce440a9cb386df4a814
18020 Author: Stefan Roese <sr@denx.de>
18021 Date: Mon Aug 6 21:10:17 2007 +0200
18023 ppc4xx: Update AMCC Bamboo README doc/README.bamboo
18025 As suggested by Eugene O'Brien <Eugene.O'Brien@advantechamt.com>,
18026 here an updated Bamboo README.
18028 Signed-off-by: Stefan Roese <sr@denx.de>
18030 commit 9c7e4b06214db61bb21f1bcbe57c97519669baae
18031 Author: Wolfgang Denk <wd@denx.de>
18032 Date: Mon Aug 6 02:17:36 2007 +0200
18034 Coding style cleanup. Update CHANGELOG.
18036 Signed-off-by: Wolfgang Denk <wd@denx.de>
18038 commit 221838cc7eb178370ff62aa05920a582e12ac322
18039 Author: Jason Jin <Jason.jin@freescale.com>
18040 Date: Tue Jul 10 09:03:22 2007 +0800
18042 Remove the bios emulator from MAI board.
18044 The bios emulator in the MAI board can not pass compile
18045 and have a lot of crap in it. remove it and will have a
18046 clean and small bios emulator in the drivers directory
18047 which can be uesed for every board.
18049 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
18051 commit 5618332409bb96f4448d1712899369fc80c0b489
18052 Author: Jason Jin <Jason.jin@freescale.com>
18053 Date: Fri Jul 13 12:14:59 2007 +0800
18055 Fix some compile issues for MAI board.
18057 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
18059 commit 0f460a1ee148b648ee242c3157650287d4296260
18060 Author: Jason Jin <Jason.jin@freescale.com>
18061 Date: Fri Jul 13 12:14:58 2007 +0800
18063 Configurations for ATI video card BIOS emulator
18065 This patch add definition of the BIOS emulator and the ATI framebuffer
18066 driver for MPC8641HPCN board.
18068 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
18069 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
18071 commit ece92f85053b8df613edcf05b26a416cbc3d629c
18072 Author: Jason Jin <Jason.jin@freescale.com>
18073 Date: Fri Jul 6 08:34:56 2007 +0800
18075 This is a BIOS emulator, porting from SciTech for u-boot, mainly for
18076 ATI video card BIOS. and can be used for x86 code emulation by some
18079 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
18081 commit 5072188acabde3178fac7f5a597150e6e74fd40c
18082 Author: Jason Jin <Jason.jin@freescale.com>
18083 Date: Fri Jul 6 08:33:33 2007 +0800
18085 This is a framebuffer driver for ATI video card, can work for PCI9200,
18086 X300, X700, X800 ATI video cards.
18088 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
18089 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
18091 commit 5728be389e65fd47f34b33c2596271eb4db751ae
18092 Author: Wolfgang Denk <wd@denx.de>
18093 Date: Mon Aug 6 01:01:49 2007 +0200
18095 Coding style cleanup. Update CHANGELOG.
18097 Signed-off-by: Wolfgang Denk <wd@denx.de>
18099 commit 8092fef4c29b395958bb649647da7e3775731517
18100 Author: Martin Krause <Martin.Krause@tqs.de>
18101 Date: Tue Dec 12 14:26:01 2006 +0100
18103 Add functions to list of exported functions
18105 Additionally export the following fuctions (to make trab_config build again):
18109 Also bump the ABI version to reflect this change
18111 Signed-off-by: Martin Krause <martin.krause@tqs.de>
18113 commit 63cec5814fab5d2b1c86982327433807a5ac0249
18114 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
18115 Date: Thu Aug 2 14:09:49 2007 -0500
18117 Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.
18119 All of the PCI/PCI-Express driver and initialization code that
18120 was in the MPC8641HPCN port has now been moved into the common
18121 drivers/fsl_pci_init.c. In a subsequent patch, this will be
18122 utilized by the 85xx ports as well.
18124 Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added.
18126 Also enable the second PCI-Express controller on 8641
18127 by getting its BATS and CFG_ setup right.
18129 Fixed a u16 vendor compiler warning in AHCI driver too.
18131 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
18132 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
18133 Signed-off-by: Jon Loeliger <jdl@freescale.com>
18135 commit a274ca4f6d68830e7c916f897561cff8c4101c38
18136 Author: Michal Simek <monstr@monstr.eu>
18137 Date: Sun Aug 5 22:33:05 2007 +0200
18139 [FIX] Coding style cleanup
18141 commit af8377d4eb3a0ac5a831830d5ce63fbf65fecb7f
18142 Author: Michal Simek <monstr@monstr.eu>
18143 Date: Sun Aug 5 16:13:31 2007 +0200
18145 [FIX] Xilinx Uartlite driver
18146 Because PPC405 can use UARTLITE serial interface and
18147 Microblaze can use Uart16550 serial interface not only Uartlite.
18149 commit 98889edd50aadf862071eb5664747ad0d568a20e
18150 Author: Michal Simek <monstr@monstr.eu>
18151 Date: Sun Aug 5 15:54:53 2007 +0200
18153 [FIX] Change configuration for XUPV2P Microblaze board
18155 commit 537091b4eed9302865d03fef3f7212b4fe5cf28f
18156 Author: Michal Simek <monstr@monstr.eu>
18157 Date: Sun Aug 5 15:53:50 2007 +0200
18159 [PATCH] Added support for Xilinx Emac community driver
18161 commit 86b116b1b1e165ca4840daefed36d2e3b8460173
18162 Author: Bartlomiej Sieka <tur@semihalf.com>
18163 Date: Fri Aug 3 12:08:16 2007 +0200
18165 cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family.
18167 Add the ability for modules from the Schindler cm5200 family to use a
18168 single U-Boot image:
18169 - rename cm1_qp1 to cm5200
18170 - add run-time module detection
18171 - parametrize SDRAM configuration according to the module we are running on
18173 Few minor, board-specific fixes included in this patch:
18174 - better MAC address handling
18175 - updated default environment ('update' command uses +{filesize} now)
18176 - improved error messages in the auto-update code
18177 - allow booting U-Boot from RAM (CFG_RAMBOOT)
18179 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
18180 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
18181 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
18183 commit c7e717ebc2b044d7a71062552c9dc0f54ea9b779
18184 Author: Andy Fleming <afleming@freescale.com>
18185 Date: Fri Aug 3 04:05:25 2007 -0500
18187 Add Marvell 1149 PHY support to the TSEC
18189 commit b1b54e352028ed370c3aa95d6fdeb9d64c5d2f86
18190 Author: Wolfgang Denk <wd@denx.de>
18191 Date: Thu Aug 2 21:27:46 2007 +0200
18193 Coding style cleanup, update CHANGELOG
18195 Signed-off-by: Wolfgang Denk <wd@denx.de>
18197 commit 63e22764d2f8653f68888c667eb65b3996b52680
18198 Author: Wolfgang Denk <wd@denx.de>
18199 Date: Thu Aug 2 10:11:18 2007 +0200
18201 Minor cleanup of <board>_nand build rules.
18203 commit 9ca8d79de096c65b9b9c867259b3ff4685f775ef
18204 Author: Stefan Roese <sr@denx.de>
18205 Date: Thu Aug 2 08:33:56 2007 +0200
18207 ppc4xx: Code cleanup
18209 Signed-off-by: Stefan Roese <sr@denx.de>
18211 commit c92409812206ac67a7fa7aae298539a9c3804a46
18212 Author: Grzegorz Bernacki <gjb@semihalf.com>
18213 Date: Tue Jul 31 18:51:48 2007 +0200
18215 [ppc440SPe] Graceful recovery from machine check during PCIe configuration
18217 During config transactions on the PCIe bus an attempt to scan for a
18218 non-existent device can lead to a machine check exception with certain
18219 peripheral devices. In order to avoid crashing in such scenarios the
18220 instrumented versions of the config cycle read routines are introduced, so
18221 the exceptions fixups framework can gracefully recover.
18223 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
18224 Acked-by: Rafal Jaworowski <raj@semihalf.com>
18226 commit dec99558b9ea75a37940d07f41a3565a50b54ad1
18227 Author: Rafal Jaworowski <raj@semihalf.com>
18228 Date: Tue Jul 31 18:19:54 2007 +0200
18230 [ppc4xx] Separate settings for PCIe bus numbering on 440SPe rev.A
18232 This brings back separate settings for PCIe bus numbers depending on chip
18233 revision, which got eliminated in 2b393b0f0af8402ef43b25c1968bfd29714ddffa
18234 commit. 440SPe rev. A does NOT work properly with the same settings as for
18235 the rev. B (no devices are seen on the bus during enumeration).
18237 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
18239 commit cdd917a43da6fa7fc8f54a3cc9f420ce5ecf3197
18240 Author: Wolfgang Denk <wd@denx.de>
18241 Date: Thu Aug 2 00:48:45 2007 +0200
18243 Fix build errors and warnings / code cleanup.
18245 Signed-off-by: Wolfgang Denk <wd@denx.de>
18247 commit d2f68006627eda6cb6c7f364bddf621dbfd2fc68
18248 Author: Eugene OBrien <eugene.obrien@advantechamt.com>
18249 Date: Tue Jul 31 10:24:56 2007 +0200
18251 ppc4xx: Update AMCC Bamboo 440EP support
18253 Changed storage type of cfg_simulate_spd_eeprom to const
18254 Changed storage type of gpio_tab to stack storage
18255 (Cannot access global data declarations in .bss until afer code relocation)
18257 Improved SDRAM tests to catch problems where data is not uniquely addressable
18258 (e.g. incorrectly programmed SDRAM row or columns)
18260 Added CONFIG_PROG_SDRAM_TLB to support Bamboo SIMM/DIMM modules
18261 Fixed AM29LV320DT (OpCode Flash) sector map
18263 Signed-off-by: Eugene OBrien <eugene.obrien@advantechamt.com>
18264 Signed-off-by: Stefan Roese <sr@denx.de>
18266 commit ea9f6bce383cc9fbcdee28b5836109b1a6dba574
18267 Author: Stefan Roese <sr@denx.de>
18268 Date: Tue Jul 31 08:37:01 2007 +0200
18270 ppc4xx: Update 440EPx lwmon5 board support
18272 - Clear ECC status regs after ECC POST test
18273 - Set dcbz for ECC generation with caches enabled as default
18276 Signed-off-by: Stefan Roese <sr@denx.de>
18278 commit 27a528fb41433c4c1e2b5d6bd3fd8d78606fc724
18279 Author: Stefan Roese <sr@denx.de>
18280 Date: Mon Jul 30 11:04:57 2007 +0200
18282 ppc4xx: Only print ECC related info when the error bis are set
18284 Signed-off-by: Stefan Roese <sr@denx.de>
18286 commit e36220a4baf1f188ba60f17e9d0f043069b1362a
18287 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18288 Date: Fri Jul 27 16:44:31 2007 +0200
18290 new FPGA image for PLU405 board
18292 new FPGA image for PLU405 board with improved CompactFlash timing
18294 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18296 commit 8993e54b6f397973794f3d6f47d3b3c0c98dd4f6
18297 Author: Rafal Jaworowski <raj@semihalf.com>
18298 Date: Fri Jul 27 14:43:59 2007 +0200
18300 [ADS5121] Support for the ADS5121 board
18302 The following MPC5121e subsystems are supported:
18304 - low-level CPU init
18305 - NOR Boot Flash (common CFI driver)
18311 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
18312 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
18313 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
18315 commit 1863cfb7b100ba0ee3401799457a01dc058745f8
18316 Author: Rafal Jaworowski <raj@semihalf.com>
18317 Date: Fri Jul 27 14:22:04 2007 +0200
18319 [PPC] Remove unused MSR_USER definition
18321 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
18323 commit d4024bb72dd81695ec099b2199eda0d27c623e62
18324 Author: John Otken <john@softadvances.com>
18325 Date: Thu Jul 26 17:49:11 2007 +0200
18327 ppc4xx: Add support for AMCC 405EP Taihu board
18329 Signed-off-by: John Otken <john@softadvances.com>
18331 commit b66091de6c7390620312c2501db23d8391e7cabb
18332 Author: Anatolij Gustschin <agust@denx.de>
18333 Date: Thu Jul 26 15:08:01 2007 +0200
18335 ppc4xx: lwmon5: Update Lime initialization
18337 Change Lime SDRAM initialization to now support 100MHz and
18338 133MHz (if enabled). Also the framebuffer is initialized to
18339 display a blue rectangle with a white border.
18341 Signed-off-by: Anatolij Gustschin <agust@denx.de>
18342 Signed-off-by: Stefan Roese <sr@denx.de>
18344 commit 9f24a808f17fc0f37b7fb4805f734741335caecc
18345 Author: Stefan Roese <sr@denx.de>
18346 Date: Tue Jul 24 09:52:52 2007 +0200
18348 ppc4xx: lwmon5: Support for 128 MByte NOR FLASH added
18350 The used Intel NOR FLASH chips have internally two dies, and are now
18351 treated as two seperate chips.
18353 Signed-off-by: Stefan Roese <sr@denx.de>
18355 commit aedf5bde179ecfbd0a96130d18996a96518b785f
18356 Author: Stefan Roese <sr@denx.de>
18357 Date: Tue Jul 24 07:20:09 2007 +0200
18359 ppc4xx: Fix lwmon5 interrupt controller setup (polarity, trigger...)
18361 As suggested by Hakan Eryigit, here an updated setup for the lwmon5
18362 interrupt controller.
18364 Signed-off-by: Stefan Roese <sr@denx.de>
18366 commit a71d96eac8130b53a91f93cd10c70fca0db18d52
18367 Author: Stefan Roese <sr@denx.de>
18368 Date: Fri Jul 20 15:03:44 2007 +0200
18370 ppc4xx: Fix bug with default GPIO output value
18372 As spotted by Matthias Fuchs, the default output values for all GPIO1
18373 outputs were not setup correctly. This patch fixes this issue.
18375 Signed-off-by: Stefan Roese <sr@denx.de>
18377 commit 531e3e8b831f357056448fa573137d5fb37000fd
18378 Author: Pavel Kolesnikov <concord@emcraft.com>
18379 Date: Fri Jul 20 15:03:03 2007 +0200
18381 POST: Add ECC POST for the lwmon5 board
18383 This patch adds ECC Post test for the Lwmon5 board based
18384 on PPC440EPx to U-Boot.
18386 Signed-off-by: Pavel Kolesnikov <concord@emcraft.com>
18387 Acked-by: Yuri Tikhonov <yur@emcraft.com>
18388 Acked-by: Stefan Roese <sr@denx.de>
18390 commit cc3023b9f95d7ac959a764471a65001062aecf41
18391 Author: Rafal Jaworowski <raj@semihalf.com>
18392 Date: Thu Jul 19 17:12:28 2007 +0200
18394 Fix breakage of 8xx boards from recent commit.
18396 This patch fixes the negative consequences for 8xx of the recent
18397 "ppc4xx: Clean up 440 exceptions handling" commit.
18399 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
18401 commit c883f6ea32dce91f07670b3aafecf6c99b1e5341
18402 Author: Stefan Roese <sr@denx.de>
18403 Date: Mon Jul 16 13:11:12 2007 +0200
18405 Coding style cleanup
18407 Signed-off-by: Stefan Roese <sr@denx.de>
18409 commit 8848ec858f74ed6dab06fb6d5ddc933e0a1328bf
18410 Author: Stefan Roese <sr@denx.de>
18411 Date: Mon Jul 16 10:02:12 2007 +0200
18413 ppc4xx: Code cleanup
18415 Signed-off-by: Stefan Roese <sr@denx.de>
18417 commit 2a49fc17d09020e7ebd9536694d99d20e419fcb8
18418 Author: Stefan Roese <sr@denx.de>
18419 Date: Mon Jul 16 10:01:38 2007 +0200
18421 ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setup
18423 Signed-off-by: Stefan Roese <sr@denx.de>
18425 commit df3f17422aeb03fb81a7ac8c78d2b05d05aa4cf9
18426 Author: Stefan Roese <sr@denx.de>
18427 Date: Mon Jul 16 10:00:43 2007 +0200
18429 ppc4xx: Support for Yucca board with 440SPe Rev A added to 44x_spd_ddr2.c
18431 The new boardspecific DDR2 controller configuration is used for the Yucca
18432 board. Now the Yucca board with 440SPe Rev. A chips is also supported.
18434 Signed-off-by: Stefan Roese <sr@denx.de>
18436 commit 6ed14addf97c8cd8f531e9ae7b2d3e222fffd53e
18437 Author: Stefan Roese <sr@denx.de>
18438 Date: Mon Jul 16 09:57:00 2007 +0200
18440 ppc4xx: Add new weak functions to support boardspecific DDR2 configuration
18442 The new "weak" functions ddr_wrdtr() and ddr_clktr() are added to better
18443 support non default, boardspecific DDR(2) controller configuration.
18445 Signed-off-by: Stefan Roese <sr@denx.de>
18447 commit 5743a9207a370b90f09b20ebd61167c806b937f3
18448 Author: Stefan Roese <sr@denx.de>
18449 Date: Mon Jul 16 08:53:51 2007 +0200
18451 ppc4xx: Add remove_tlb() function to remove a mem area from TLB setup
18453 The new function remove_tlb() can be used to remove the TLB's used to
18454 map a specific memory region. This is especially useful for the DDR(2)
18455 setup routines which configure the SDRAM area temporarily as a cached
18456 area (for speedup on auto-calibration and ECC generation) and later
18457 need this area uncached for normal usage.
18459 Signed-off-by: Stefan Roese <sr@denx.de>
18461 commit 0c0a9cda1bde37106520476ed486bd67eb8d30ae
18462 Author: Michal Simek <monstr@monstr.eu>
18463 Date: Mon Jul 16 00:31:07 2007 +0200
18465 [PATCH] Support for Xilinx EmacLite controller
18467 commit 3a6cab844cf74f76639d795e0be8717e02c86af7
18468 Author: Wolfgang Denk <wd@denx.de>
18469 Date: Sat Jul 14 22:51:02 2007 +0200
18473 Signed-off-by: Wolfgang Denk <wd@denx.de>
18475 commit 5280f352c8da33b1d7fbf448768717d9e16ff9a1
18476 Author: Michal Simek <monstr@monstr.eu>
18477 Date: Sat Jul 14 13:11:28 2007 +0200
18479 [FIX] support for simply measuring time
18481 commit 91bb4ca665d2e0cf7f60c4b5b370990250ec0c43
18482 Author: Michal Simek <monstr@monstr.eu>
18483 Date: Sat Jul 14 12:41:23 2007 +0200
18485 [FS] Added support for ROMFS
18487 commit 011595307731a7a67a7445d107c279d031e8ab97
18488 Author: Heiko Schocher <hs@pollux.denx.de>
18489 Date: Sat Jul 14 01:06:58 2007 +0200
18491 [PCS440EP] - fix compile error, if BUILD_DIR is used
18493 commit 5a2f1098d81ad58b309e5e558d0492643166a799
18494 Author: Michal Simek <monstr@monstr.eu>
18495 Date: Sat Jul 14 00:18:48 2007 +0200
18497 [PATCH] Support time without timer
18499 commit a476ca2ac2217ddd05a2bf0c514075814b10a3c0
18500 Author: Michal Simek <monstr@monstr.eu>
18501 Date: Fri Jul 13 21:43:55 2007 +0200
18503 [PATCH] Remove problem with disabled BARREL SHIFTER
18505 commit 55e26ad62107d2f14f757de3ae0b14b9aa7aed94
18506 Author: Michal Simek <monstr@monstr.eu>
18507 Date: Fri Jul 13 21:41:44 2007 +0200
18509 [FIX] correct help for rspr
18511 commit fad63407154f46246ce80d53a9c669a44362ac67
18512 Author: Heiko Schocher <hs@pollux.denx.de>
18513 Date: Fri Jul 13 09:54:17 2007 +0200
18515 make show_boot_progress () weak.
18517 Signed-off-by: Heiko Schocher <hs@denx.de>
18519 commit 907902472391b6ca1876ec300687562ecaf459b1
18520 Author: Heiko Schocher <hs@pollux.denx.de>
18521 Date: Fri Jul 13 08:26:05 2007 +0200
18523 [PCS440EP] - The DIAG LEDs are now blinking, if an error occur
18524 - fix compile error, if BUILD_DIR is used
18526 Signed-off-by: Heiko Schocher <hs@denx.de>
18528 commit a2e1c7098cf9574386b0c96841dfc8ea5cc93578
18529 Author: Stefan Roese <sr@denx.de>
18530 Date: Thu Jul 12 16:32:08 2007 +0200
18532 ppc4xx: Change receive buffer handling in the 4xx emac driver
18534 This change fixes a bug in the receive buffer handling, that
18535 could lead to problems upon high network traffic (broadcasts...).
18537 Signed-off-by: Stefan Roese <sr@denx.de>
18539 commit 239f05ee4dd4cfe0b50f251b533dcebe9e67c360
18540 Author: Wolfgang Denk <wd@denx.de>
18541 Date: Thu Jul 12 01:45:34 2007 +0200
18543 Update CHANGELOG, minor coding style cleanup.
18545 Signed-off-by: Wolfgang Denk <wd@denx.de>
18547 commit 5a56af3b522ba47fb33a3fee84d23bf1e5429654
18548 Author: Andy Fleming <afleming@freescale.com>
18549 Date: Fri Jun 8 16:41:18 2007 -0500
18551 Remove erroneous errata code from Marvel 88E1111S driver
18553 The Marvel 88E1111S driver for the TSEC was copied from the
18554 88E1101 driver, and included a fix for an erratum which does not
18555 exist on that part. Now it is removed
18557 Signed-off-by: Andy Fleming <afleming@freescale.com>
18559 commit 982efcf23fd03647e01e2fbe28a7a36239156cc0
18560 Author: Andy Fleming <afleming@freescale.com>
18561 Date: Tue Jun 5 16:38:44 2007 -0500
18563 From: eran liberty <eran.liberty@gmail.com>
18565 adds the reset register to 85xx immap
18567 Signed-off-by: Eran Liberty <eran.liberty@gmail.com>
18568 Signed-off-by: Andy Fleming <afleming@freescale.com>
18570 commit d3ec0d943a045bdb99e159e7bbc77430e09f11d7
18571 Author: Andy Fleming <afleming@freescale.com>
18572 Date: Thu May 10 17:50:01 2007 -0500
18574 Polished the 85xx ADS config files
18576 Made the boot commands use device trees by default.
18577 Also moved the ramdisk to 1000000 (I think the previous address
18578 was getting overridden during boot).
18580 Signed-off-by: Andy Fleming <afleming@freescale.com>
18582 commit bfb37b32d1b0b03f18077dba49cc66a6e76fa038
18583 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
18584 Date: Wed May 9 11:03:32 2007 -0500
18586 8544ds: Fix Makefile after moving pixis to board/freescale.
18588 The OBJTREE != SRCTREE build scenario was broken.
18591 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
18592 Signed-off-by: Jon Loeliger <jdl@freescale.com>
18594 commit 2a3cee43c3b71fa5b8d91db19f05067865290f3e
18595 Author: Andy Fleming <afleming@freescale.com>
18596 Date: Wed May 9 00:54:20 2007 -0500
18598 tsec: Fix PHY code to match first driver
18600 Jarrold Wen noticed that the generic PHY code always matches
18601 under the current implementation. Change it so the first match
18602 wins, and *only* unknown PHYs trigger the generic driver
18604 Signed-off-by: Andy Fleming <afleming@freescale.com>
18606 commit ccc091aac61a38cd998d575d92f7232e256d6312
18607 Author: Andy Fleming <afleming@freescale.com>
18608 Date: Tue May 8 17:27:43 2007 -0500
18610 Add support for CPM device tree configuration to 8560 ADS
18612 * Adds code to modify CPM frequencies
18613 * Cleans up the config file to #define TSEC and (for now) #undef FCC
18614 * Adds the MII command for all 8560 ADS configurations
18615 * Updates config file to provide convenience commands for booting
18618 Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
18619 Signed-off-by: Andy Fleming <afleming@freescale.com>
18621 commit 7507d56ccaf7aae1c474342a9a5540165cd7e9d9
18622 Author: Andy Fleming <afleming@freescale.com>
18623 Date: Tue May 8 17:23:02 2007 -0500
18625 Fix Marvell 88e1145 PHY init code
18627 Fix a bug in the Marvell 88e1145 PHY init code in the TSEC driver
18628 where the reset was being done after the errata code instead of
18631 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
18632 Signed-off-by: Andy Fleming <afleming@freescale.com>
18634 commit 5dc210dec5bace98a50b6ba905347890091a9bb0
18635 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
18636 Date: Wed Jul 11 14:52:16 2007 -0500
18638 Add simple agent/end-point configuration in PCI AutoConfig for PCI_CLASS_PROCESSOR_POWERPC.
18640 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
18642 commit e8b85f3ba4cd8930e0a2fea2100c815d64201765
18643 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
18644 Date: Wed Jul 11 14:52:08 2007 -0500
18646 pciauto setup bridge
18648 The P2P bridge bus numbers programmed into the device are relative to
18651 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
18653 commit 571f49fa717004ca4268b4e24057efc7bf9f987b
18654 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
18655 Date: Wed Jul 11 14:52:01 2007 -0500
18657 Support PCIe extended config registers
18659 FSL PCIe block has extended cfg registers in the 100 and 400 range.
18660 For example, to read the LTSSM register: pci display <busn>.0 404 1
18662 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
18664 commit ba5feb12581bb2912ce301e4866b71f846e9fc07
18665 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
18666 Date: Wed Jul 11 14:51:48 2007 -0500
18668 Minor improvements to drivers/pci_auto.c
18670 - Make pciauto_{pre,post}scan_setup_bridge non-static
18671 - Added physical address display in debug messages.
18673 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
18675 commit 40e81addab7bb74d20ddf681ce9babc880a828ee
18676 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
18677 Date: Wed Jul 11 14:51:35 2007 -0500
18679 Start pci hose scan from hose->current_busno.
18681 Ensure hose->current_busno is not less than first_busno. This fixes
18682 broken board code which leaves current_busno=0 when first_busno is
18683 greater than 0 for the cases with multiple controllers.
18685 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
18687 commit 3865b1fb7843a08ad49a6319a36415752276ff48
18688 Author: Stefan Roese <sr@denx.de>
18689 Date: Wed Jul 11 12:13:53 2007 +0200
18691 Fix some compile problems introduced by the latest CFG_CMD_xxx cleanup
18693 Signed-off-by: Stefan Roese <sr@denx.de>
18695 commit fa1df308926a6f70e3504c57514ef27ac31fd13a
18696 Author: Bartlomiej Sieka <tur@semihalf.com>
18697 Date: Wed Jul 11 20:11:07 2007 +0200
18699 CM1.QP1: Support for the Schindler CM1.QP1 board.
18701 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
18702 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
18704 commit 96e1d75be8193ca79e4215a368bf9d7f2362450f
18705 Author: Heiko Schocher <hs@pollux.denx.de>
18706 Date: Wed Jul 11 18:39:11 2007 +0200
18708 [PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed
18709 - now the Flash ST M29W040B is supported (not tested)
18710 - fix the "led" command
18711 - fix compile error, if BUILD_DIR is used
18713 Signed-off-by: Heiko Schocher <hs@denx.de>
18715 commit e9514751cfa5cce61ea699fa0d3eb37898a5eeb5
18716 Author: Stefan Roese <sr@denx.de>
18717 Date: Sun Jul 8 13:44:27 2007 +0200
18719 Fix malloc problem introduced with the relocation fixup for the PPC platform
18721 The relocation fixup didn't handle the malloc pointer initialization
18722 correctly. This patch fixes this problem. Tested successfully on 4xx.
18723 The relocation fixup patches for 4xx will follow soon.
18725 Signed-off-by: Stefan Roese <sr@denx.de>
18727 commit 0dca874db62718e41253659e60f3a1de7eb418ce
18728 Author: TsiChung <tcliew@Goku.(none)>
18729 Date: Tue Jul 10 15:45:43 2007 -0500
18731 Cache update and added CFG_UNIFY_CACHE
18733 Enabled cache in cpu_init_f() for faster flash to mem allocation. Updated cache handling in start.S. Applied cache invalidate in fec_send() and fec_recv(). Added CFG_UNIFY_CACHE for CF V3 only.
18735 Signed-off-by: TsiChung <tcliew@Goku.(none)>
18737 commit 52b017604a8f4d4a795880ef6e7861d7f2f1b005
18738 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18739 Date: Thu Jul 5 23:36:16 2007 -0500
18741 Update header file. Include dtimer_intr_setup(). Changed timer divider to global define.
18743 Include immap.h and timer.h. Moved dtimer interrupt setup to dtimer_intr_setup() from cpu/mcf532x/interrupts.c. Changed (CFG_CLK /1000000) -1 << 8 to CFG_TIMER_PRESCALER
18745 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18747 commit 5cdc07c7ef8f08ea55d3c47ed9221d91aa6d5fac
18748 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18749 Date: Thu Jul 5 23:31:25 2007 -0500
18751 Update header files
18753 Include immap.h and renamed mcfrtc.h to rtc.h
18755 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18757 commit 2870e98ac8e5553e9187b12a47e5f46babb53990
18758 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18759 Date: Thu Jul 5 23:29:21 2007 -0500
18761 Add mcffec_initialize()
18763 Added mcffec_initialize() in eth_initialize()
18765 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18767 commit 45a25bfd0c52f8a3fa137216bc94d32f90bedc5d
18768 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18769 Date: Thu Jul 5 23:27:40 2007 -0500
18771 Update header file and clean up
18775 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18777 commit 0cee9c66318602c856a899ae5fa7579ccba6443a
18778 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18779 Date: Thu Jul 5 23:23:15 2007 -0500
18781 New uart structure and defines
18783 Seperated from mcfuart.h
18785 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18787 commit a90e79de8d99e9c9d69d60bfff9f24c337165900
18788 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18789 Date: Thu Jul 5 23:22:31 2007 -0500
18791 New timer structure and defines
18793 Seperated from mcftimer.h
18795 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18797 commit e04acb2eba4782489417240eff76e20e176aec10
18798 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18799 Date: Thu Jul 5 23:21:09 2007 -0500
18801 Rename mcfrtc to rtc
18803 Since it is already in m68k folder, un-necessary to pad mcf. Replaced immap_5329.h and m5329.h to immap.h
18805 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18807 commit 2bd806fe4fc23958b8f78778199e7a6e3f8f6ad5
18808 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18809 Date: Thu Jul 5 23:17:36 2007 -0500
18811 Rename mcfserial.c. Update include header
18813 Renamed mcfserial.c to mcfuart.c. Modified Makefile for mcfuart.o from mcfserial.o. Replace immap_5329.h and m5329.h to immap.h
18815 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18817 commit f2208fbc2eb9de3f4285bfaa021c6ebae16c9b0e
18818 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18819 Date: Thu Jul 5 23:13:58 2007 -0500
18821 Header file update, clean up and cache handling
18823 Replaced immap_5329.h and m5329.h with immap.h. Included cache_invalid.
18825 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18827 commit 2e3f25ae9082daa9f5d181db45dfbc2e52ce0f97
18828 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18829 Date: Thu Jul 5 23:10:40 2007 -0500
18831 Create interrupts.c and modify Makefile
18833 interrupt_init() and dtimer_intr_setup() are placed in interrupts.c. Added interrupts.o to Makefile
18835 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18837 commit ddd104f1ed655eda50c06ba636237a83ed943f34
18838 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18839 Date: Thu Jul 5 23:06:55 2007 -0500
18843 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18845 commit b9bf3de377b2bae70c983c9b97feae914999e735
18846 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18847 Date: Thu Jul 5 23:05:31 2007 -0500
18849 Update header file and some clean up
18851 Replaced immap_5329.h and m5329.h with immap.h. Removed whitespaces.
18853 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18855 commit 84a015b52ec820a5ae173717d78516de731c89c2
18856 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18857 Date: Thu Jul 5 23:03:28 2007 -0500
18859 Update header file and enable icache
18861 Replaced immap_5329.h and m5329.h with immap.h. Enabled icache_enable() in cpu_init_r().
18863 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18865 commit 7a17e759c7a8b58e910daf54df611e94fc8ca074
18866 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18867 Date: Thu Jul 5 23:01:22 2007 -0500
18869 Update header file and removed interrupt_init()
18871 Replace immap_5329.h and m5329.h with immap.h. Removed interrupt_init() and placed it in interrupts.c
18873 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18875 commit 3b635492c95bd0d6e08f93f699821cba1f602a64
18876 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18877 Date: Thu Jul 5 22:57:46 2007 -0500
18879 Update for flash.o and mii.o
18881 Removed flash.o and added mii.o
18883 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18885 commit c5ded275d839e4ff79f41718d50a835d989f57bc
18886 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18887 Date: Thu Jul 5 22:56:19 2007 -0500
18889 MII functions calls.
18891 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18893 commit 427c814104560e29bda14955c67703245aaaa5b4
18894 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18895 Date: Thu Jul 5 22:54:42 2007 -0500
18897 Removed MII functions and replaced immap_5329.h and m5329.h with immap.h.
18899 The removed MII routines will be placed in mii.c.
18901 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18903 commit 01a793fda09c63df5a496f09dc1c7cb26e6751a2
18904 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18905 Date: Thu Jul 5 22:51:05 2007 -0500
18909 There is a Common Flash Interface Driver existed. To use the CFI driver, define CFG_FLASH_CFI in configuration file.
18911 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18913 commit 2744354a8437b8f78db178e30660215688bff570
18914 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18915 Date: Thu Jul 5 22:46:38 2007 -0500
18917 Seperate old structure defines and new structure defines
18919 Removed new uart structure and defines to uart.h
18921 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18923 commit 2bd58608dbcff8890ca9a0c59e861ac24f8bb230
18924 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18925 Date: Thu Jul 5 22:45:01 2007 -0500
18927 Seperate old structure defines and new structure defines
18929 New timer structure and defines will move to new timer.h
18931 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18933 commit 8cd5cd6de4ff92e03978338ed7aeb3ce7b7b9784
18934 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18935 Date: Thu Jul 5 22:42:23 2007 -0500
18941 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18943 commit 514871f565dd8bd1121e4a3ac1665a790e20b8f2
18944 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18945 Date: Thu Jul 5 22:41:24 2007 -0500
18949 Replaced whitespace with tabs
18951 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18953 commit 48dbfeabc7afffe30609a4489f10c22cb67ef7dd
18954 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18955 Date: Thu Jul 5 22:39:07 2007 -0500
18957 Create new header file and move peripherals base address from configs file to new header file.
18959 Create new header file to include immap_5xxx.h and m5xxx.h and to share among drivers without update in driver file each processor is added. Moved peripherals base address and defines from configs file to immap.h.
18961 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18963 commit be296e31c4411f96d9cb3d2afc8fcb006867abfa
18964 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18965 Date: Thu Jul 5 22:24:58 2007 -0500
18969 Changed MAKEALL file mode to executable, removed executable file mode from Makefile
18971 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
18973 commit b3aff0cb9ecf236d7e8c93761dd1dadf6837a582
18974 Author: Jon Loeliger <jdl@freescale.com>
18975 Date: Tue Jul 10 11:19:50 2007 -0500
18977 disk/ doc/ lib_*/ and tools/: Remove lingering references to CFG_CMD_* symbols.
18979 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
18980 Those always evaluated TRUE, and thus were always compiled
18981 even when IDE really wasn't defined/wanted.
18983 Signed-off-by: Jon Loeliger <jdl@freescale.com>
18985 commit ddb5d86f0215bcb6c293510c50eb050e92883b7a
18986 Author: Jon Loeliger <jdl@freescale.com>
18987 Date: Tue Jul 10 11:13:21 2007 -0500
18989 drivers/: Remove lingering references to CFG_CMD_* symbols.
18991 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
18992 Those always evaluated TRUE, and thus were always compiled
18993 even when IDE really wasn't defined/wanted.
18995 Signed-off-by: Jon Loeliger <jdl@freescale.com>
18997 commit f40a7f3e3888b42a43674b099e5470022c8c544c
18998 Author: Jon Loeliger <jdl@freescale.com>
18999 Date: Tue Jul 10 11:07:56 2007 -0500
19001 fs/: Remove lingering references to CFG_CMD_* symbols.
19003 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
19004 Those always evaluated TRUE, and thus were always compiled
19005 even when IDE really wasn't defined/wanted.
19007 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19009 commit 610f2e9c28a9c101e09fa1b78143cf5f00ed1593
19010 Author: Jon Loeliger <jdl@freescale.com>
19011 Date: Tue Jul 10 11:05:02 2007 -0500
19013 net/: Remove lingering references to CFG_CMD_* symbols.
19015 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
19016 Those always evaluated TRUE, and thus were always compiled
19017 even when IDE really wasn't defined/wanted.
19019 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19021 commit 902531788376046da212afd1661cffb62f3daa1c
19022 Author: Jon Loeliger <jdl@freescale.com>
19023 Date: Tue Jul 10 11:02:44 2007 -0500
19025 common/: Remove lingering references to CFG_CMD_* symbols.
19027 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
19028 Those always evaluated TRUE, and thus were always compiled
19029 even when IDE really wasn't defined/wanted.
19031 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19033 commit d39b57415838c73fb0a37eca84de3c68ba990586
19034 Author: Jon Loeliger <jdl@freescale.com>
19035 Date: Tue Jul 10 10:48:22 2007 -0500
19037 board/[j-z]*: Remove lingering references to CFG_CMD_* symbols.
19039 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
19040 Those always evaluated TRUE, and thus were always compiled
19041 even when IDE really wasn't defined/wanted.
19043 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19045 commit 77a318545d57aefa844752465b94c7e09a3f26d0
19046 Author: Jon Loeliger <jdl@freescale.com>
19047 Date: Tue Jul 10 10:39:10 2007 -0500
19049 board/[A-Za-i]*: Remove lingering references to CFG_CMD_* symbols.
19051 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
19052 Those always evaluated TRUE, and thus were always compiled
19053 even when IDE really wasn't defined/wanted.
19055 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19057 commit 068b60a0eb7e73b243ca55399f2a7df76e2c3f3d
19058 Author: Jon Loeliger <jdl@freescale.com>
19059 Date: Tue Jul 10 10:27:39 2007 -0500
19061 cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols.
19063 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19065 commit 079a136c3588814784561d6e4856970ee82d6e2a
19066 Author: Jon Loeliger <jdl@freescale.com>
19067 Date: Tue Jul 10 10:12:10 2007 -0500
19069 include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*.
19071 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
19072 used to be included but CONFIG_BOOTP_MASK was not defined.
19074 Remove lingering references to CFG_CMD_* symbols.
19076 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19078 commit 7f5c01577400c74cc5bac74f41dd0d3c79df623c
19079 Author: Jon Loeliger <jdl@freescale.com>
19080 Date: Tue Jul 10 09:38:02 2007 -0500
19082 include/configs/[g-o]*: Cleanup BOOTP and lingering CFG_CMD_*.
19084 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
19085 used to be included but CONFIG_BOOTP_MASK was not defined.
19087 Remove lingering references to CFG_CMD_* symbols.
19089 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19091 commit 80ff4f99b84b64edca3fd10da365ec1493be1c95
19092 Author: Jon Loeliger <jdl@freescale.com>
19093 Date: Tue Jul 10 09:29:01 2007 -0500
19095 include/configs/[a-e]*: Cleanup BOOTP and lingering CFG_CMD_*.
19097 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
19098 used to be included but CONFIG_BOOTP_MASK was not defined.
19100 Remove lingering references to CFG_CMD_* symbols.
19102 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19104 commit a1aa0bb502e25fd598b5e0ccdfb2c174921d714a
19105 Author: Jon Loeliger <jdl@freescale.com>
19106 Date: Tue Jul 10 09:22:23 2007 -0500
19108 include/configs/[P-Z]*: Cleanup BOOTP and lingering CFG_CMD_*.
19110 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
19111 used to be included but CONFIG_BOOTP_MASK was not defined.
19113 Remove lingering references to CFG_CMD_* symbols.
19115 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19117 commit 659e2f6736232a08acca8785c206e2b4d9cd07d7
19118 Author: Jon Loeliger <jdl@freescale.com>
19119 Date: Tue Jul 10 09:10:49 2007 -0500
19121 include/configs/[J-O]*: Cleanup BOOTP and lingering CFG_CMD_*.
19123 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
19124 used to be included but CONFIG_BOOTP_MASK was not defined.
19126 Remove lingering references to CFG_CMD_* symbols.
19128 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19130 commit 11799434c5ff15a612577bb1ad1f4ea1a0595e4b
19131 Author: Jon Loeliger <jdl@freescale.com>
19132 Date: Tue Jul 10 09:02:57 2007 -0500
19134 include/configs/[A-I]*: Cleanup BOOTP and lingering CFG_CMD_*.
19136 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
19137 used to be included but CONFIG_BOOTP_MASK was not defined.
19139 Remove lingering references to CFG_CMD_* symbols.
19141 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19143 commit 1fe80d79c5c4e52d3410a7ab4b8515da095cdab3
19144 Author: Jon Loeliger <jdl@freescale.com>
19145 Date: Mon Jul 9 22:08:34 2007 -0500
19147 Finally retire cmd_confdefs.h and CONFIG_BOOTP_MASK!
19149 All of the choices for CONFIG_BOOTP_ are now documented in
19150 the README file. You must now individually select exactly
19151 the set that you want using a series of
19152 #define CONFIG_BOOTP_<x>
19153 statements in the board port config files now.
19155 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19157 commit d3b8c1a743dcd31625c99e6a44590f207eb00028
19158 Author: Jon Loeliger <jdl@freescale.com>
19159 Date: Mon Jul 9 21:57:31 2007 -0500
19161 include/configs/[m-z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
19163 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19165 commit 2fd90ce575b02d189cbf443c85309bcd001aa393
19166 Author: Jon Loeliger <jdl@freescale.com>
19167 Date: Mon Jul 9 21:48:26 2007 -0500
19169 include/configs/[a-m]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
19171 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19173 commit 37d4bb70586659dedef1658ce1bed071be098aec
19174 Author: Jon Loeliger <jdl@freescale.com>
19175 Date: Mon Jul 9 21:38:02 2007 -0500
19177 include/configs/[T-Z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
19179 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19181 commit 18225e8dd1950bd6dbf35011e436db7f474c187d
19182 Author: Jon Loeliger <jdl@freescale.com>
19183 Date: Mon Jul 9 21:31:24 2007 -0500
19185 include/configs/[P-S]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
19187 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19189 commit 7be044e4ea644b0ef1c486dadc1a4c2665b4374d
19190 Author: Jon Loeliger <jdl@freescale.com>
19191 Date: Mon Jul 9 21:24:19 2007 -0500
19193 include/configs/[H-N]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
19195 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19197 commit 5d2ebe1b3ef0055c661bb1a0d252bf252380069f
19198 Author: Jon Loeliger <jdl@freescale.com>
19199 Date: Mon Jul 9 21:16:53 2007 -0500
19201 include/configs/[A-G]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
19203 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19205 commit f55f7f8d83f36021ab1f0e3d738f5d8c8083a7e3
19206 Author: Jon Loeliger <jdl@freescale.com>
19207 Date: Mon Jul 9 19:12:30 2007 -0500
19209 Retire CONFIG_COMMANDS finally.
19210 Strip old CFG_CMD_* symbols out.
19212 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19214 commit b5501f7d720fed99ab0b42c83f5dea52868ce007
19215 Author: Jon Loeliger <jdl@freescale.com>
19216 Date: Mon Jul 9 19:10:03 2007 -0500
19218 Update README.* to reference new CONFIG_CMD_* names now.
19220 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19222 commit 4431283c7e6d54ae180d466e51bf2d97471a0ad9
19223 Author: Jon Loeliger <jdl@freescale.com>
19224 Date: Mon Jul 9 19:06:00 2007 -0500
19226 cpu/m*: Remove obsolete references to CONFIG_COMMANDS
19228 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19230 commit 3a1ed1e1f922c419bb71f7df4949d783ade369fa
19231 Author: Jon Loeliger <jdl@freescale.com>
19232 Date: Mon Jul 9 18:57:22 2007 -0500
19234 cpu/[7a-ln-z]*: Remove obsolete references to CONFIG_COMMANDS
19236 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19238 commit ab3abcbabd840928fb1eb5122118ca466b5e5013
19239 Author: Jon Loeliger <jdl@freescale.com>
19240 Date: Mon Jul 9 18:45:16 2007 -0500
19242 board/[q-z]*: Remove obsolete references to CONFIG_COMMANDS
19244 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19246 commit 3fe00109a5f12de55b6e25b1f98dfc24bc9090c9
19247 Author: Jon Loeliger <jdl@freescale.com>
19248 Date: Mon Jul 9 18:38:39 2007 -0500
19250 board/[m-p]*: Remove obsolete references to CONFIG_COMMANDS
19252 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19254 commit c508a4cefd8a953fc64957650506a035e6e3d9d1
19255 Author: Jon Loeliger <jdl@freescale.com>
19256 Date: Mon Jul 9 18:31:28 2007 -0500
19258 board/[f-l]*: Remove obsolete references to CONFIG_COMMANDS
19260 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19262 commit b9307262f8a9f3b5c9e15a6067eadc17407146f6
19263 Author: Jon Loeliger <jdl@freescale.com>
19264 Date: Mon Jul 9 18:24:55 2007 -0500
19266 board/[d-e]*: Remove obsolete references to CONFIG_COMMANDS
19268 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19270 commit fcec2eb93e126400009729328e797f12bc94f1fd
19271 Author: Jon Loeliger <jdl@freescale.com>
19272 Date: Mon Jul 9 18:19:09 2007 -0500
19274 board/[A-Za-c]*: Remove obsolete references to CONFIG_COMMANDS
19276 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19278 commit a593814f2be0c9cdc3133cd550b167b8a988328f
19279 Author: Jon Loeliger <jdl@freescale.com>
19280 Date: Mon Jul 9 18:10:50 2007 -0500
19282 rtc/: Remove obsolete references to CONFIG_COMMANDS
19284 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19286 commit 67350568f9d46e66c21829f3513b3db0caeb948b
19287 Author: Jon Loeliger <jdl@freescale.com>
19288 Date: Mon Jul 9 18:05:38 2007 -0500
19290 lib_{arm,avr32,blackfin,generic,i386}/: Remove obsolete references to CONFIG_COMMANDS
19292 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19294 commit 7def6b34f910f08d7ef0a14646da067719237ca2
19295 Author: Jon Loeliger <jdl@freescale.com>
19296 Date: Mon Jul 9 18:02:11 2007 -0500
19298 lib_{m68k,microblaze,mips,ppc}/: Remove obsolete references to CONFIG_COMMANDS
19300 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19302 commit dd60d1223b99a88a7216f3e041fe40634ad4c2bb
19303 Author: Jon Loeliger <jdl@freescale.com>
19304 Date: Mon Jul 9 17:56:50 2007 -0500
19306 fs/: Remove obsolete references to CONFIG_COMMANDS
19308 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19310 commit c91898bbc505aff3e12a807af88e76da18efb7ee
19311 Author: Jon Loeliger <jdl@freescale.com>
19312 Date: Mon Jul 9 17:46:09 2007 -0500
19314 tools/: Remove obsolete references to CONFIG_COMMANDS
19316 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19318 commit 643d1ab23960950b52e0a2803c2d3ea4c558fa01
19319 Author: Jon Loeliger <jdl@freescale.com>
19320 Date: Mon Jul 9 17:45:14 2007 -0500
19322 net/: Remove obsolete references to CONFIG_COMMANDS
19324 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19326 commit cb51c0bf88f95a1bca68324b0126f8eed8b43273
19327 Author: Jon Loeliger <jdl@freescale.com>
19328 Date: Mon Jul 9 17:39:42 2007 -0500
19330 drivers/[n-z]*: Remove obsolete references to CONFIG_COMMANDS
19332 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19334 commit 07d38a17e964aec4c7827f0ee9a583bc8cc1ad6b
19335 Author: Jon Loeliger <jdl@freescale.com>
19336 Date: Mon Jul 9 17:30:01 2007 -0500
19338 drivers/[a-m]*: Remove obsolete references to CONFIG_COMMANDS
19340 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19342 commit cde5c64d17cf4834aa7b5c373f288bc7dad27b29
19343 Author: Jon Loeliger <jdl@freescale.com>
19344 Date: Mon Jul 9 17:22:37 2007 -0500
19346 disk/: Remove obsolete references to CONFIG_COMMANDS
19348 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19350 commit 639221c76c88215bd55af83ad174fc30d1940f8f
19351 Author: Jon Loeliger <jdl@freescale.com>
19352 Date: Mon Jul 9 17:15:49 2007 -0500
19354 include/: Remove obsolete references to CONFIG_COMMANDS
19355 Mostly removed from comments here.
19357 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19359 commit 4ef218f6fdf8d747f4589da5252b004e7d2c2876
19360 Author: Wolfgang Denk <wd@denx.de>
19361 Date: Tue Jul 10 00:01:28 2007 +0200
19363 Coding style cleanup; update CHANGELOG.
19365 Signed-off-by: Wolfgang Denk <wd@denx.de>
19367 commit c8603cfbd4573379a6076c9c208545ba2bbf019a
19368 Author: Stefan Roese <sr@denx.de>
19369 Date: Mon Jul 9 11:00:24 2007 +0200
19371 Small coding style cleanup
19373 Signed-off-by: Stefan Roese <sr@denx.de>
19375 commit 0f92c7e7c9a62755b1457d3c46f93c8c1f6c19fc
19376 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
19377 Date: Mon Jul 9 10:10:08 2007 +0200
19379 Migrate esd 405EP boards to new NAND subsystem
19381 Remove unused CFG_NAND_LEGACY define
19383 These boards to not have NAND.
19385 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
19387 commit bd84ee4c2020c3a6861f4bb2e7ea0fb49f82e803
19388 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
19389 Date: Mon Jul 9 10:10:06 2007 +0200
19391 Migrate esd 405EP boards to new NAND subsystem
19393 Migrate esd 405EP boards to new NAND subsystem
19396 -use correct io accessors (in/out_be32())
19398 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
19400 commit e09f7ab5749c345f924da272bea0521a73af5b11
19401 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
19402 Date: Mon Jul 9 10:10:04 2007 +0200
19404 Migrate esd 405EP boards to new NAND subsystem
19406 This patch prepares the migration from the legacy NAND driver
19407 to U-Boot's new NAND subsystem for esd boards.
19409 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
19411 commit c3517f919d0f61650cf3027fd4faf0f631142f6c
19412 Author: Jon Loeliger <jdl@freescale.com>
19413 Date: Sun Jul 8 18:10:08 2007 -0500
19415 common/* non-cmd*: Remove obsolete references to CONFIG_COMMANDS
19417 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19419 commit fd9bcaa35be64fe41a4223fdb6ecdbad52470b39
19420 Author: Jon Loeliger <jdl@freescale.com>
19421 Date: Sun Jul 8 18:05:39 2007 -0500
19423 common/cmd_[p-x]*: Remove obsolete references to CONFIG_COMMANDS.
19425 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19427 commit c76fe47425afc7d5d670ff0539823c85d65d9c42
19428 Author: Jon Loeliger <jdl@freescale.com>
19429 Date: Sun Jul 8 18:02:23 2007 -0500
19431 common/cmd_[i-n]*: Remove obsolete references to CONFIG_COMMANDS.
19433 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19435 commit baa26db4113679b80970ff447d91cc10217742a6
19436 Author: Jon Loeliger <jdl@freescale.com>
19437 Date: Sun Jul 8 17:51:39 2007 -0500
19439 common/cmd_[af]*: Remove obsolete references to CONFIG_COMMANDS.
19441 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19443 commit af075ee96e52dda7b6bca6c937588aeaaec5f2cd
19444 Author: Jon Loeliger <jdl@freescale.com>
19445 Date: Sun Jul 8 17:02:01 2007 -0500
19447 Clear up confusion over the CMD_POST and POST_DIAG mess.
19449 For some reason, CONFIG_POST permeated as CONFIG_CMD_POST_DIAG
19450 when it really means just CONFIG_CMD_DIAG. There is no CMD_POST.
19451 Clear this mess up some.
19453 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19455 commit b3631487105a57ab7cbadfc26efbaf9676275018
19456 Author: Jon Loeliger <jdl@freescale.com>
19457 Date: Sun Jul 8 15:45:08 2007 -0500
19459 Remove references to the old cmd_confdefs.h include file.
19461 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19463 commit a22d4da95e20049b4daa1c2a022f61e8a72f2fb6
19464 Author: Jon Loeliger <jdl@freescale.com>
19465 Date: Sun Jul 8 15:42:59 2007 -0500
19467 include/configs: Catch some CONFIG_CMD_* conversion stragglers.
19469 Use new CONFIG_CMD_* in lwmon5.h board config file.
19470 Fix CONFIG_CMD_* typo braindamage in omap1510inn.h
19472 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19474 commit a5562901661bd428f7e5feb333f796372cb81019
19475 Author: Jon Loeliger <jdl@freescale.com>
19476 Date: Sun Jul 8 15:31:57 2007 -0500
19478 include/configs: Use new CONFIG_CMD_* in various [TUVWZYZ]* named board config files.
19480 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19482 commit fe7f782d5b8c64a0195c68c31a0a11d4f641355e
19483 Author: Jon Loeliger <jdl@freescale.com>
19484 Date: Sun Jul 8 15:02:44 2007 -0500
19486 include/configs: Use new CONFIG_CMD_* in various S* named board config files.
19488 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19490 commit e9a0f8f15c11f337967aa0600ad6e8af33037f50
19491 Author: Jon Loeliger <jdl@freescale.com>
19492 Date: Sun Jul 8 15:12:40 2007 -0500
19494 include/configs: Use new CONFIG_CMD_* in various R* named board config files.
19496 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19498 commit 12aa9fd23d724bd6ab88e1baa0db35133a27303f
19499 Author: Jon Loeliger <jdl@freescale.com>
19500 Date: Sun Jul 8 14:55:07 2007 -0500
19502 include/configs: Use new CONFIG_CMD_* in various Q* named board config files.
19504 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19506 commit acf0269779422f3e147d2ddfb499c9f6ff10ad5e
19507 Author: Jon Loeliger <jdl@freescale.com>
19508 Date: Sun Jul 8 14:49:44 2007 -0500
19510 include/configs: Use new CONFIG_CMD_* in various P* named board config files.
19512 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19514 commit e18a1061a8630cb67995fdf99afd3fb50d1b187d
19515 Author: Jon Loeliger <jdl@freescale.com>
19516 Date: Sun Jul 8 14:21:43 2007 -0500
19518 include/configs: Use new CONFIG_CMD_* in various [NO]* named board config files.
19520 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19522 commit 8353e139bfad9059c54f5b2421f1a3090e15a2e2
19523 Author: Jon Loeliger <jdl@freescale.com>
19524 Date: Sun Jul 8 14:14:17 2007 -0500
19526 include/configs: Use new CONFIG_CMD_* in various M* named board config files.
19528 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19530 commit 348f258f24253433e4a2302a0bbceb6740a67246
19531 Author: Jon Loeliger <jdl@freescale.com>
19532 Date: Sun Jul 8 13:46:18 2007 -0500
19534 include/configs: Use new CONFIG_CMD_* in various [IJKL]* named board config files.
19536 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19538 commit 6c4f4da9bfc9f9403f54fce678ed0364b7c86a6a
19539 Author: Jon Loeliger <jdl@freescale.com>
19540 Date: Sun Jul 8 10:09:35 2007 -0500
19542 include/configs: Use new CONFIG_CMD_* in various H* named board config files.
19544 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19546 commit 60a0876b5106b34220e459c208bbf648073306c0
19547 Author: Jon Loeliger <jdl@freescale.com>
19548 Date: Sat Jul 7 21:04:26 2007 -0500
19550 include/configs: Use new CONFIG_CMD_* in various F* and G* named board config files.
19552 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19554 commit dcaa71562826a2466e894c868d132509dcda8444
19555 Author: Jon Loeliger <jdl@freescale.com>
19556 Date: Sat Jul 7 20:56:05 2007 -0500
19558 include/configs: Use new CONFIG_CMD_* in various E* named board config files.
19560 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19562 commit 3c3227f3c737502311b25b72084573901cbbf17d
19563 Author: Jon Loeliger <jdl@freescale.com>
19564 Date: Sat Jul 7 20:40:43 2007 -0500
19566 include/configs: Use new CONFIG_CMD_* in various D* named board config files.
19568 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19570 commit 49cf7e8ee7ef943fdfe866ce28410b0bfbf6a26c
19571 Author: Jon Loeliger <jdl@freescale.com>
19572 Date: Thu Jul 5 19:52:35 2007 -0500
19574 include/configs: Use new CONFIG_CMD_* in various C* named board config files.
19576 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19578 commit de8b2a6e33298dcdb10bdda48db25e53c3089eba
19579 Author: Jon Loeliger <jdl@freescale.com>
19580 Date: Thu Jul 5 19:32:07 2007 -0500
19582 include/configs: Use new CONFIG_CMD_* in various B* named board config files.
19584 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19586 commit 498ff9a228485bd4b9f23d066bada268f9add1dd
19587 Author: Jon Loeliger <jdl@freescale.com>
19588 Date: Thu Jul 5 19:13:52 2007 -0500
19590 include/configs: Use new CONFIG_CMD_* in various A* named board config files.
19592 Since ADS860.h includes "board/fads/fads.h" with ramifications
19593 on the CONFIG_COMMAND treatment, it too has to be adjusted to
19594 exclude already configured commands in this same commit.
19596 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19598 commit 10e038932f22ee80ebd53de312531e70e6590a2f
19599 Author: Thomas Knobloch <knobloch@siemens.com>
19600 Date: Fri Jul 6 14:58:39 2007 +0200
19602 [NAND] Bad block skipping for command nboot
19604 The old implementation of command nboot does not support reading the image from
19605 NAND flash with skipping of bad blocks. The patch implements a new version of
19606 the nboot command: by calling nboot.jffs2 from the u-boot command line the
19607 command will load the image from NAND flash with respect to bad blocks (by using
19608 nand_read_opts()). This is similar to e.g. the NAND read command: "nand
19611 Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
19612 Signed-off-by: Stefan Roese <sr@denx.de>
19614 commit 334043f601a90ac53e5ecc846fbb73a1ef38cb1f
19615 Author: Stefan Roese <sr@denx.de>
19616 Date: Fri Jul 6 12:26:51 2007 +0200
19618 ppc4xx: Update lwmon5 default environment
19620 Signed-off-by: Stefan Roese <sr@denx.de>
19622 commit 5d187430a055d62f17ca84d75e7245439d1f7e75
19623 Author: Stefan Roese <sr@denx.de>
19624 Date: Fri Jul 6 11:48:24 2007 +0200
19626 ppc4xx: Update lwmon5 board
19628 Add unlock=yes environment variable to default variables to unlock
19629 the CFI flash by default.
19631 Signed-off-by: Stefan Roese <sr@denx.de>
19633 commit 6b0a174a1e6f55e1f5a1fbb223cdad7645a4646e
19634 Author: Stefan Roese <sr@denx.de>
19635 Date: Fri Jul 6 09:45:47 2007 +0200
19637 Fix problem with get/setdcr commands introduced by cfg patches
19639 Signed-off-by: Stefan Roese <sr@denx.de>
19641 commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f
19642 Author: Wolfgang Denk <wd@denx.de>
19643 Date: Fri Jul 6 02:50:19 2007 +0200
19645 Code cleanup and default config update for STC GP3 SSA board.
19647 Signed-off-by: Wolfgang Denk <wd@denx.de>
19649 commit e4dbe1b215f5c6c462e76909d240bd96472b84de
19650 Author: Wolfgang Denk <wd@denx.de>
19651 Date: Thu Jul 5 17:56:27 2007 +0200
19653 Fixing some typos etc. introduced mainly by cfg patches.
19655 Signed-off-by: Wolfgang Denk <wd@denx.de>
19657 commit b6b4684546809f89c8bac72863ca49b5fd8ac0cd
19658 Author: Wolfgang Denk <wd@denx.de>
19659 Date: Thu Jul 5 11:12:16 2007 +0200
19661 Minor coding style cleanup. Update CHANGELOG.
19663 commit dca3b3d6d6396b67e5e84af53452164923c73443
19664 Author: Jon Loeliger <jdl@jdl.com>
19665 Date: Wed Jul 4 22:33:46 2007 -0500
19667 include/configs: Use new CONFIG_CMD_* in various [v-z]* named board config files.
19669 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19671 commit 6c18eb9804b525f3e4f3bb3d014dd69a200d9fa7
19672 Author: Jon Loeliger <jdl@jdl.com>
19673 Date: Wed Jul 4 22:33:38 2007 -0500
19675 include/configs: Use new CONFIG_CMD_* in various t* and u* named board config files.
19677 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19679 commit 46da1e96b7db14f4fcd2c92544e7c0862024bc76
19680 Author: Jon Loeliger <jdl@jdl.com>
19681 Date: Wed Jul 4 22:33:30 2007 -0500
19683 include/configs: Use new CONFIG_CMD_* in various s* named board config files.
19685 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19687 commit 90cc3eb6d2be856d9ddd81436de9cf343bc6b5c8
19688 Author: Jon Loeliger <jdl@jdl.com>
19689 Date: Wed Jul 4 22:33:23 2007 -0500
19691 include/configs: Use new CONFIG_CMD_* in various q* and r* named board config files.
19693 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19695 commit 26a34560d56a9df5bc2ae23525d9229736134757
19696 Author: Jon Loeliger <jdl@jdl.com>
19697 Date: Wed Jul 4 22:33:17 2007 -0500
19699 include/configs: Use new CONFIG_CMD_* in various p* named board config files.
19701 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19703 commit a5cb23092a7d31490a33d4ec871468b63babfa3c
19704 Author: Jon Loeliger <jdl@jdl.com>
19705 Date: Wed Jul 4 22:33:13 2007 -0500
19707 include/configs: Use new CONFIG_CMD_* in various o* named board config files.
19709 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19711 commit 929a2bfd142737003a8fc32e1b86e1f2c1850257
19712 Author: Jon Loeliger <jdl@jdl.com>
19713 Date: Wed Jul 4 22:33:07 2007 -0500
19715 include/configs: Use new CONFIG_CMD_* in various n* named board config files.
19717 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19719 commit 5dc11a511960d490f7f01ffd746edfe6277f99b0
19720 Author: Jon Loeliger <jdl@jdl.com>
19721 Date: Wed Jul 4 22:33:01 2007 -0500
19723 include/configs: Use new CONFIG_CMD_* in various m* named board config files.
19725 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19727 commit 9bbb1c0820c1fbd3811ab6ee4ba0f6c6f76b27e4
19728 Author: Jon Loeliger <jdl@jdl.com>
19729 Date: Wed Jul 4 22:32:57 2007 -0500
19731 include/configs: Use new CONFIG_CMD_* in various l* named board config files.
19733 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19735 commit bc234c129fa04fb9fa33530930e5cbc6084cd47a
19736 Author: Jon Loeliger <jdl@jdl.com>
19737 Date: Wed Jul 4 22:32:51 2007 -0500
19739 include/configs: Use new CONFIG_CMD_* in various j* and k* named board config files.
19741 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19743 commit 1d2c6bc491969f8d8fb34c8e30e8bea7a2af9c31
19744 Author: Jon Loeliger <jdl@jdl.com>
19745 Date: Wed Jul 4 22:32:32 2007 -0500
19747 include/configs: Use new CONFIG_CMD_* in various i* named board config files.
19749 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19751 commit 48d5d102a2f2e619c92050b9aedbb69689185bc0
19752 Author: Jon Loeliger <jdl@jdl.com>
19753 Date: Wed Jul 4 22:32:25 2007 -0500
19755 include/configs: Use new CONFIG_CMD_* in various h* named board config files.
19757 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19759 commit 72eb0efaed7048afcc61fc6f0085c49394b5dc36
19760 Author: Jon Loeliger <jdl@jdl.com>
19761 Date: Wed Jul 4 22:32:19 2007 -0500
19763 include/configs: Use new CONFIG_CMD_* in various g* named board config files.
19765 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19767 commit 1bec3d3002d3bbbae6f2468a0f7376db1120d33e
19768 Author: Jon Loeliger <jdl@jdl.com>
19769 Date: Wed Jul 4 22:32:10 2007 -0500
19771 include/configs: Use new CONFIG_CMD_* in various e* named board config files.
19773 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19775 commit ab999ba1b31ebe78dd16374394a55d7c6e5aa6e4
19776 Author: Jon Loeliger <jdl@jdl.com>
19777 Date: Wed Jul 4 22:32:03 2007 -0500
19779 include/configs: Use new CONFIG_CMD_* in various d* named board config files.
19781 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19783 commit 37e4f24b87fa255ae456d193b7cd23c18dd1d56b
19784 Author: Jon Loeliger <jdl@jdl.com>
19785 Date: Wed Jul 4 22:31:56 2007 -0500
19787 include/configs: Use new CONFIG_CMD_* in various c* named board config files.
19789 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19791 commit ba2351f9d1e841bd00ea6dad1e3c16d0259ad264
19792 Author: Jon Loeliger <jdl@jdl.com>
19793 Date: Wed Jul 4 22:31:49 2007 -0500
19795 include/configs: Use new CONFIG_CMD_* in various b* named board config files.
19797 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19799 commit 0b361c916617aff79e647b40f0e43361e0bbaccf
19800 Author: Jon Loeliger <jdl@jdl.com>
19801 Date: Wed Jul 4 22:31:42 2007 -0500
19803 include/configs: Use new CONFIG_CMD_* in various a* named board config files.
19805 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19807 commit b730cda82e362df6a22f4c59c0a9b97e885b1014
19808 Author: Jon Loeliger <jdl@jdl.com>
19809 Date: Wed Jul 4 22:31:35 2007 -0500
19811 include/configs: Use new CONFIG_CMD_* in mpc5xx board config files.
19813 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19815 commit d794cfefead5fc177cf4f41164e80382e9c9484a
19816 Author: Jon Loeliger <jdl@jdl.com>
19817 Date: Wed Jul 4 22:31:15 2007 -0500
19819 include/configs: Use new CONFIG_CMD_* in various 5200 board config files.
19821 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19823 commit ef0df52ab49eea4a30c15087fd27d54c1d946f2c
19824 Author: Jon Loeliger <jdl@jdl.com>
19825 Date: Wed Jul 4 22:31:07 2007 -0500
19827 include/configs: Use new CONFIG_CMD_* in STx board config files.
19829 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19831 commit 866e3089bfc826bb4dc74637f8aad87a3bab79fc
19832 Author: Jon Loeliger <jdl@jdl.com>
19833 Date: Wed Jul 4 22:30:58 2007 -0500
19835 include/configs: Use new CONFIG_CMD_* in sbc* board config files.
19837 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19839 commit 2694690e285acaa34922f55f4b5ae030da60c55a
19840 Author: Jon Loeliger <jdl@jdl.com>
19841 Date: Wed Jul 4 22:30:50 2007 -0500
19843 include/configs: Use new CONFIG_CMD_* in TQM board config files.
19845 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19847 commit 1cc4c458329765b58e584a19821e796b3c10e976
19848 Author: Jon Loeliger <jdl@jdl.com>
19849 Date: Wed Jul 4 22:30:28 2007 -0500
19851 include/configs: Use new CONFIG_CMD_* in 82xx board config files.
19853 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19855 commit 8ea5499afdaba0acf60923dd99001c399d4a7c8e
19856 Author: Jon Loeliger <jdl@jdl.com>
19857 Date: Wed Jul 4 22:30:06 2007 -0500
19859 include/configs: Use new CONFIG_CMD_* in 83xx board config files.
19861 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19863 commit b44896215a09c60fa40cae906f7ed207bbc2c492
19864 Author: Sergei Poselenov <sposelenov@emcraft.com>
19865 Date: Thu Jul 5 08:17:37 2007 +0200
19867 Merged POST framework with the current TOT.
19869 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
19871 commit b24629fa377214d63bb40d1360e354b6d3e4af56
19872 Author: Jon Loeliger <jdl@jdl.com>
19873 Date: Wed Jun 13 13:23:15 2007 -0500
19875 mpc86xx: Remove old CFG_CMD_* references.
19877 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19879 commit 46175d9764da129bb4fd341cd2554dc7d55f5b2a
19880 Author: Jon Loeliger <jdl@jdl.com>
19881 Date: Wed Jun 13 13:22:54 2007 -0500
19883 Add MPC8568MDS to MAKEALL 85xx target.
19885 It was missing from the original port submission.
19887 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19889 commit 2835e518c969e5124ba1174eef3e8375e12fa7d5
19890 Author: Jon Loeliger <jdl@jdl.com>
19891 Date: Wed Jun 13 13:22:08 2007 -0500
19893 include/configs: Use new CONFIG_CMD_* in 85xx board config files.
19895 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19897 commit 56b304ac2091689506088a9ae67f63fd6300cf16
19898 Author: Jon Loeliger <jdl@jdl.com>
19899 Date: Wed Jun 13 13:21:37 2007 -0500
19901 Fix #if typo in CONFIG_CMD_* changes.
19903 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19905 commit f780b83316d9af1f61d71cc88b1917b387b9b995
19906 Author: Niklaus Giger <niklausgiger@gmx.ch>
19907 Date: Wed Jun 27 18:11:38 2007 +0200
19909 resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX
19911 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
19913 commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4
19914 Author: Stefan Roese <sr@denx.de>
19915 Date: Wed Jul 4 10:06:30 2007 +0200
19917 ppc4xx: Update lwmon5 board
19919 - Add optional ECC generation routine to preserve existing
19920 RAM values. This is needed for the Linux log-buffer support
19921 - Add optional DDR2 setup with CL=4
19922 - GPIO50 not used anymore
19923 - Lime register setup added
19925 Signed-off-by: Stefan Roese <sr@denx.de>
19927 commit 6810a34677dbc446334f5e451f1682426dd33b49
19928 Author: Grant Likely <grant.likely@secretlab.ca>
19929 Date: Tue Jul 3 00:17:28 2007 -0600
19931 Fix Makefile to use $(MKCONFIG) macro for all board ports
19933 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
19935 commit 90b1b2d69b9396ff2f01165ebc16c9a594eb5926
19936 Author: Grant Likely <grant.likely@secretlab.ca>
19937 Date: Tue Jul 3 00:17:28 2007 -0600
19939 Fix Makefile to use $(MKCONFIG) macro for all board ports
19941 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
19943 commit 057004f4a4863554d56cc56268bfa7c7d9738e27
19944 Author: Grant Likely <grant.likely@secretlab.ca>
19945 Date: Tue Jul 3 00:34:49 2007 -0600
19947 Correct fixup relocation for mpc83xx
19949 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
19951 commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96
19952 Author: Grant Likely <grant.likely@secretlab.ca>
19953 Date: Tue Jul 3 00:34:44 2007 -0600
19955 Correct fixup relocation for mpc8260
19957 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
19959 commit f3a52fe05923935db86985daf9438e2f70ac39aa
19960 Author: Grant Likely <grant.likely@secretlab.ca>
19961 Date: Tue Jul 3 00:34:39 2007 -0600
19963 Correct fixup relocation for mpc824x
19965 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
19967 commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00
19968 Author: Grant Likely <grant.likely@secretlab.ca>
19969 Date: Tue Jul 3 00:34:34 2007 -0600
19971 Correct fixup relocation for mpc8220
19973 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
19975 commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90
19976 Author: Grant Likely <grant.likely@secretlab.ca>
19977 Date: Tue Jul 3 00:34:29 2007 -0600
19979 Correct fixup relocation for MPC5xxx
19981 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
19983 commit 3649cd99ba815b6601868735765602f00ef3692b
19984 Author: Grant Likely <grant.likely@secretlab.ca>
19985 Date: Tue Jul 3 00:34:24 2007 -0600
19987 Correct relocation fixup for mpc5xx
19989 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
19991 commit f82b3b6304b620ef7e28bfaa1ea887a2ad2fa325
19992 Author: Grant Likely <grant.likely@secretlab.ca>
19993 Date: Tue Jul 3 00:34:19 2007 -0600
19995 Don't set gd->reloc_off if relocation of .fixup works correctly
19997 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
19999 commit e1a6144c32dc7de73bcdd33995de0148cbd0bd28
20000 Author: Grant Likely <grant.likely@secretlab.ca>
20001 Date: Tue Jul 3 00:34:14 2007 -0600
20003 Remove obsolete mpc83xx linker scripts
20005 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
20007 commit 17e32fc3908bf7089d3f16fc82a1c3ae674dd65b
20008 Author: Grant Likely <grant.likely@secretlab.ca>
20009 Date: Tue Jul 3 00:34:09 2007 -0600
20011 Consolidate mpc8260 linker scripts
20013 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
20015 commit af7d38b393690d7eeaf418ac85a1e831a50d5fd0
20016 Author: Grant Likely <grant.likely@secretlab.ca>
20017 Date: Tue Jul 3 00:34:04 2007 -0600
20019 Remove obsolete mpc824x linker scripts
20021 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
20023 commit f94a3aecebc40ca0939c7d66d010009cf51be9e2
20024 Author: Grant Likely <grant.likely@secretlab.ca>
20025 Date: Tue Jul 3 00:33:59 2007 -0600
20027 Remove obsolete mpc824x linker scripts (3 of 4)
20029 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
20031 commit a71c084f3ac7fedf144537db2b2da47323068833
20032 Author: Grant Likely <grant.likely@secretlab.ca>
20033 Date: Tue Jul 3 00:33:53 2007 -0600
20035 Remove obsolete mpc824x linker scripts (2 of 4)
20037 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
20039 commit f670a15468d1365241d40022b9408e1004181f5e
20040 Author: Grant Likely <grant.likely@secretlab.ca>
20041 Date: Tue Jul 3 00:33:48 2007 -0600
20043 Remove obsolete mpc824x linker scripts (1 of 4)
20045 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
20047 commit 09555bd45a04c0e54f172528d21bc18896550d28
20048 Author: Grant Likely <grant.likely@secretlab.ca>
20049 Date: Tue Jul 3 00:33:43 2007 -0600
20051 Remove obsolete mpc8220 linker scripts
20053 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
20055 commit 5efb992f046e51225c93d52f80fecbe433abd789
20056 Author: Grant Likely <grant.likely@secretlab.ca>
20057 Date: Tue Jul 3 00:33:38 2007 -0600
20059 Remove obsolete mpc5xxx linker scripts (3 of 3)
20061 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
20063 commit 07c13dfef65b31647e69d8b61daa1eec598add1a
20064 Author: Grant Likely <grant.likely@secretlab.ca>
20065 Date: Tue Jul 3 00:33:33 2007 -0600
20067 Remove obsolete mpc5xxx linker scripts (2 of 3)
20069 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
20071 commit b4f67513a624ce85866c66c575bd2d9d7977d7f0
20072 Author: Grant Likely <grant.likely@secretlab.ca>
20073 Date: Tue Jul 3 00:33:28 2007 -0600
20075 Remove obsolete mpc5xxx linker scripts (1 of 3)
20077 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
20079 commit b7d8e05f8675249b5f208aa73babeed384a4519d
20080 Author: Grant Likely <grant.likely@secretlab.ca>
20081 Date: Tue Jul 3 00:33:23 2007 -0600
20083 Remove obsolete mpc5xx linker scripts
20085 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
20087 commit 416a0b6d40f6eba3a2fc547253c16bda28d922f7
20088 Author: Grant Likely <grant.likely@secretlab.ca>
20089 Date: Tue Jul 3 00:33:18 2007 -0600
20091 Consolidate mpc83xx linker scripts
20093 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
20095 commit 5fc59175b92883ed5d2666a04e6bc49e70a4a365
20096 Author: Grant Likely <grant.likely@secretlab.ca>
20097 Date: Tue Jul 3 00:33:13 2007 -0600
20099 Consolidate mpc8260 linker scripts
20101 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
20103 commit 737f9eb02d7335df2b3e4d7a4d3348784d1da207
20104 Author: Grant Likely <grant.likely@secretlab.ca>
20105 Date: Tue Jul 3 00:33:08 2007 -0600
20107 Consolidate mpc824x linker scripts
20109 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
20111 commit 9c757b789a59a855db57b448dd825329c4e9c4a0
20112 Author: Grant Likely <grant.likely@secretlab.ca>
20113 Date: Tue Jul 3 00:33:03 2007 -0600
20115 Consolidate mpc8220 linker scripts
20117 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
20119 commit d181c9a15cd41863fe24840d17848429f27d3c8c
20120 Author: Grant Likely <grant.likely@secretlab.ca>
20121 Date: Tue Jul 3 00:32:58 2007 -0600
20123 Consolidate mpc5xxx linker scripts
20125 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
20127 commit 287ac924adb7291bebe5086652a362a30ab28b13
20128 Author: Grant Likely <grant.likely@secretlab.ca>
20129 Date: Tue Jul 3 00:32:53 2007 -0600
20131 Consolidate mpc5xx linker scripts
20133 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
20135 commit 52b8704d0245e589f86d462e9ec25aeb7ecbbbdd
20136 Author: Wolfgang Denk <wd@denx.de>
20137 Date: Wed Jul 4 00:43:53 2007 +0200
20139 Fix a few file permission problems.
20141 Signed-off-by: Wolfgang Denk <wd@denx.de>
20143 commit 78e0cf2de7be7f1eaeeb622eb61fd50e4d5e205c
20144 Author: Wolfgang Denk <wd@denx.de>
20145 Date: Wed Jul 4 00:38:38 2007 +0200
20147 Minor coding style cleanup. Rebuild CHANGELOG file.
20149 commit 2f9c19e496acb6bb50d9299e1aab377625d48c38
20150 Author: Jon Loeliger <jdl@jdl.com>
20151 Date: Mon Jun 11 19:03:44 2007 -0500
20153 configs/ mpc86xx: Rewrite command line options using new CONFIG_CMD-* style.
20155 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20157 commit 602ad3b33d9ceef83dbab46be68646d645d637ee
20158 Author: Jon Loeliger <jdl@jdl.com>
20159 Date: Mon Jun 11 19:03:39 2007 -0500
20161 README: Rewrite command line config to use CONFIG_CMD_* names.
20163 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20165 commit 72a074cec68e5bad60d63206c050974e08afd804
20166 Author: Jon Loeliger <jdl@jdl.com>
20167 Date: Mon Jun 11 19:03:34 2007 -0500
20169 include/ non-config: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
20171 This is a compatibility step that allows both the older form
20172 and the new form to co-exist for a while until the older can
20173 be removed entirely.
20175 All transformations are of the form:
20177 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
20179 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
20181 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20183 commit 5fcf543e0b6628c76ff48705b1b0566bfd11507b
20184 Author: Jon Loeliger <jdl@jdl.com>
20185 Date: Mon Jun 11 19:03:28 2007 -0500
20187 tools/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
20189 This is a compatibility step that allows both the older form
20190 and the new form to co-exist for a while until the older can
20191 be removed entirely.
20193 All transformations are of the form:
20195 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
20197 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
20199 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20201 commit 9107ebe0d352420895ab69b715697bdebc8caf50
20202 Author: Jon Loeliger <jdl@jdl.com>
20203 Date: Mon Jun 11 19:03:23 2007 -0500
20205 board/[k-z]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
20207 This is a compatibility step that allows both the older form
20208 and the new form to co-exist for a while until the older can
20209 be removed entirely.
20211 All transformations are of the form:
20213 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
20215 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
20217 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20219 commit 5e378003d592ea828ec69d6defcd4de79096dd5c
20220 Author: Jon Loeliger <jdl@jdl.com>
20221 Date: Mon Jun 11 19:03:19 2007 -0500
20223 board/[Ma-i]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
20225 This is a compatibility step that allows both the older form
20226 and the new form to co-exist for a while until the older can
20227 be removed entirely.
20229 All transformations are of the form:
20231 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
20233 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
20235 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20237 commit 737184114ec9c9e0ab94d6713536126073bd2472
20238 Author: Jon Loeliger <jdl@jdl.com>
20239 Date: Mon Jun 11 19:03:15 2007 -0500
20241 cpu/ non-mpc*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
20243 This is a compatibility step that allows both the older form
20244 and the new form to co-exist for a while until the older can
20245 be removed entirely.
20247 All transformations are of the form:
20249 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
20251 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
20253 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20255 commit f48070fe5fe440dfb5ee5268c920de70e48ea327
20256 Author: Jon Loeliger <jdl@jdl.com>
20257 Date: Mon Jun 11 19:03:08 2007 -0500
20259 cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
20261 This is a compatibility step that allows both the older form
20262 and the new form to co-exist for a while until the older can
20263 be removed entirely.
20265 All transformations are of the form:
20267 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
20269 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
20271 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20273 commit 0c505db0a0dc1f670b13ce3b4d3fbf1ec5b3cbd2
20274 Author: Jon Loeliger <jdl@jdl.com>
20275 Date: Mon Jun 11 19:03:03 2007 -0500
20277 lib_*/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
20279 This is a compatibility step that allows both the older form
20280 and the new form to co-exist for a while until the older can
20281 be removed entirely.
20283 All transformations are of the form:
20285 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
20287 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
20289 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20291 commit 73f032021ec5f13cda8faa4e34b6de80960eb86f
20292 Author: Jon Loeliger <jdl@jdl.com>
20293 Date: Mon Jun 11 19:02:58 2007 -0500
20295 lib_ppc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
20297 This is a compatibility step that allows both the older form
20298 and the new form to co-exist for a while until the older can
20299 be removed entirely.
20301 All transformations are of the form:
20303 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
20305 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
20307 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20309 commit 98b79003c21c2578206003256de4e781d6b36ca8
20310 Author: Jon Loeliger <jdl@jdl.com>
20311 Date: Mon Jun 11 19:02:53 2007 -0500
20313 rtc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
20315 This is a compatibility step that allows both the older form
20316 and the new form to co-exist for a while until the older can
20317 be removed entirely.
20319 All transformations are of the form:
20321 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
20323 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
20325 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20327 commit 6e2115acb6a892d53a6881bf253ae41d3df39156
20328 Author: Jon Loeliger <jdl@jdl.com>
20329 Date: Mon Jun 11 19:02:49 2007 -0500
20331 net/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
20333 This is a compatibility step that allows both the older form
20334 and the new form to co-exist for a while until the older can
20335 be removed entirely.
20337 All transformations are of the form:
20339 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
20341 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
20343 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20345 commit 45cdb9b72c94655c7308b464a2666057c0b286e0
20346 Author: Jon Loeliger <jdl@jdl.com>
20347 Date: Mon Jun 11 19:02:34 2007 -0500
20349 disk/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
20351 This is a compatibility step that allows both the older form
20352 and the new form to co-exist for a while until the older can
20353 be removed entirely.
20355 All transformations are of the form:
20357 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
20359 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
20361 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20363 commit 4e109ae98294a5ca7ff848b7652c7bfd4023a94a
20364 Author: Jon Loeliger <jdl@jdl.com>
20365 Date: Mon Jun 11 19:02:20 2007 -0500
20367 fs/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
20369 This is a compatibility step that allows both the older form
20370 and the new form to co-exist for a while until the older can
20371 be removed entirely.
20373 All transformations are of the form:
20375 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
20377 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
20379 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20381 commit d5be43de93ff905c465e509d45a3164ef48d26e7
20382 Author: Jon Loeliger <jdl@jdl.com>
20383 Date: Mon Jun 11 19:02:10 2007 -0500
20385 drivers/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
20387 This is a compatibility step that allows both the older form
20388 and the new form to co-exist for a while until the older can
20389 be removed entirely.
20391 All transformations are of the form:
20393 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
20395 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
20397 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20399 commit b453960d4fdb87b3970d96119b90df2ed024fc4a
20400 Author: Jon Loeliger <jdl@jdl.com>
20401 Date: Mon Jun 11 19:02:05 2007 -0500
20403 common/ non-cmd: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
20405 This is a compatibility step that allows both the older form
20406 and the new form to co-exist for a while until the older can
20407 be removed entirely.
20409 All transformations are of the form:
20411 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
20413 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
20415 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20417 commit 65c450b47a62659d522cfa8f4fa1e4e5c60dccd0
20418 Author: Jon Loeliger <jdl@jdl.com>
20419 Date: Mon Jun 11 19:01:54 2007 -0500
20421 common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
20423 This is a compatibility step that allows both the older form
20424 and the new form to co-exist for a while until the older can
20425 be removed entirely.
20427 All transformations are of the form:
20429 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
20431 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
20433 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20435 commit a76adc8142c1d956385a109e0b70f9319ede4d66
20436 Author: Jon Loeliger <jdl@jdl.com>
20437 Date: Mon Jun 11 19:01:43 2007 -0500
20439 common/cmd_[a-f]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
20441 This is a compatibility step that allows both the older form
20442 and the new form to co-exist for a while until the older can
20443 be removed entirely.
20445 All transformations are of the form:
20447 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
20449 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
20451 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20453 commit ec63b10b61fd68238d4c15c1cd04c0b38228e2c1
20454 Author: Jon Loeliger <jdl@jdl.com>
20455 Date: Mon Jun 11 19:01:34 2007 -0500
20457 Introduce initial versions of new Command Config files.
20459 Derive three new files from cmd_confdefs.h:
20460 config_bootp.h - Has BOOTP related config options, not commands
20461 config_cmd_all.h - Has a CONFIG_CMD_* definition for every command
20462 config_cmd_default.h - Has a CONFIG_CMD_* definition for default cmds.
20464 For now, include "config_bootp.h" for compatability until all
20465 users of it directly include it properly.
20467 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20469 commit 1f2a05898658900dc5717761e27abf2052e67e13
20470 Author: Mushtaq Khan <mushtaqk_921@yahoo.co.in>
20471 Date: Sat Jun 30 18:50:48 2007 +0200
20475 Signed-off-by: mushtaq khan <mushtaqk_921@yahoo.co.in>
20477 commit a5d71e290f3673269be8eefb4ec44f53412f9461
20478 Author: Heiko Schocher <hs@pollux.denx.de>
20479 Date: Mon Jun 25 19:11:37 2007 +0200
20481 [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG
20483 Signed-off-by: Heiko Schocher <hs@denx.de>
20485 commit a1bd6200eccd3a02040a955d5f43d3ee1fc9f93b
20486 Author: Niklaus Giger <niklaus.giger@nestal.com>
20487 Date: Mon Jun 25 17:03:13 2007 +0200
20489 ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt
20491 This patch prints the DDR status registers upon machine check
20492 interrupt on the 440EPx/GRx. This can be useful especially when
20493 ECC support is enabled.
20495 I added some small changes to the original patch from Niklaus to
20496 make it compile clean.
20498 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
20499 Signed-off-by: Stefan Roese <sr@denx.de>
20501 commit 807018fb7faceb429ce0cb47baa2073746b33a4e
20502 Author: Niklaus Giger <niklaus.giger@nestal.com>
20503 Date: Mon Jun 25 16:50:55 2007 +0200
20505 ppc4xx: Fix O=buildir builds
20507 This patch fixes the problem to assemble cpu/ppc4xx/start.S
20508 experienced last week where building failed having specified
20509 O=../build.sequoia.
20511 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
20513 commit 466fff1a7bb5fe764a06450626f6098219f446b8
20514 Author: Stefan Roese <sr@denx.de>
20515 Date: Mon Jun 25 15:57:39 2007 +0200
20517 ppc4xx: Add pci_pre_init() for 405 boards
20519 This patch removes the CFG_PCI_PRE_INIT option completely, since
20520 it's not needed anymore with the patch from Matthias Fuchs with
20521 the "weak" pci_pre_init() implementation.
20523 Signed-off-by: Stefan Roese <sr@denx.de>
20525 commit 6f35c53166213c24a5a0e2390ed861136ff73870
20526 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
20527 Date: Sun Jun 24 17:41:21 2007 +0200
20529 ppc4xx: Maintenance patch for esd's CPCI405 derivats
20531 -add pci_pre_init() for pci interrupt fixup code
20532 -disable phy sleep mode via reset_phy() function
20533 -use correct io accessors
20536 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
20538 commit 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8
20539 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
20540 Date: Sun Jun 24 17:23:41 2007 +0200
20542 ppc4xx: Add pci_pre_init() for 405 boards
20544 This patch adds support for calling a plattform dependant
20545 pci_pre_init() function for 405 boards. This can be used to
20546 move the current pci_405gp_fixup_irq() function into the
20549 This patch also makes the CFG_PCI_PRE_INIT define obsolete.
20550 A default function with 'weak' attribute is used when
20551 a board specific pci_pre_init() is not implemented.
20553 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
20555 commit 1636d1c8529c006d106287cfbc20cd0a246fe1cb
20556 Author: Wolfgang Denk <wd@denx.de>
20557 Date: Fri Jun 22 23:59:00 2007 +0200
20559 Coding stylke cleanup; rebuild CHANGELOG
20561 commit 2dc64451b4c08ffd619372abfdc2506a2e2363b9
20562 Author: Igor Lisitsin <igor@emcraft.com>
20563 Date: Wed Apr 18 14:55:19 2007 +0400
20565 Adapt log buffer code to support Linux 2.6
20567 A new environment variable, "logversion", selects the log buffer
20568 behaviour. If it is not set or set to a value other than 2, then the
20569 old, Linux 2.4.4, behaviour is selected.
20571 Signed-off-by: Igor Lisitsin <igor@emcraft.com>
20574 commit a11e06965ec91270c51853407ff1261d3c740386
20575 Author: Igor Lisitsin <igor@emcraft.com>
20576 Date: Wed Mar 28 19:06:19 2007 +0400
20578 Extend POST support for PPC440
20580 Added memory, CPU, UART, I2C and SPR POST tests for PPC440.
20582 Signed-off-by: Igor Lisitsin <igor@emcraft.com>
20585 commit 566a494f592ae3b3c0785d90d4e1ba45574880c4
20586 Author: Heiko Schocher <hs@pollux.denx.de>
20587 Date: Fri Jun 22 19:11:54 2007 +0200
20589 [PCS440EP] upgrade the PCS440EP board:
20590 - Show on the Status LEDs, some States of the board.
20591 - Get the MAC addresses from the EEProm
20593 - use the CF on the board.
20594 - check the U-Boot image in the Flash with a SHA1
20596 - use dynamic TLB entries generation for the SDRAM
20598 Signed-off-by: Heiko Schocher <hs@denx.de>
20600 commit 3a1f5c81b0b9557817a789bece839905581c2205
20601 Author: Stefan Roese <sr@denx.de>
20602 Date: Fri Jun 22 16:58:40 2007 +0200
20604 ppc4xx: Fix problem with extended program_tlb() funtion
20606 The recently extended program_tlb() function had a problem when
20607 multiple TLB's had to be setup (for example with 512MB of SDRAM). The
20608 virtual address was not incremented. This patch fixes this issue
20609 and is tested on Katmai with 512MB SDRAM.
20611 Signed-off-by: Stefan Roese <sr@denx.de>
20613 commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f
20614 Author: Rafal Jaworowski <raj@semihalf.com>
20615 Date: Fri Jun 22 14:58:04 2007 +0200
20617 [ppc] Fix build breakage for all non-4xx PowerPC variants.
20619 - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros
20620 - minor 4xx cleanup
20622 commit d677b32855f577ae2690dcd64a172cdd706e0ffc
20623 Author: Mike Frysinger <vapier@gentoo.org>
20624 Date: Fri Jun 22 10:34:12 2007 +0200
20626 [patch] add nand_init() prototype to nand.h
20628 since nand_init() is expected to be called by other parts of u-boot, there
20629 should be a prototype for it in nand.h
20631 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
20632 Signed-off-by: Stefan Roese <sr@denx.de>
20634 commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b
20635 Author: Wolfgang Denk <wd@denx.de>
20636 Date: Wed Jun 20 18:14:24 2007 +0200
20638 Coding style cleanup. Refresh CHANGELOG.
20640 commit b3f9ec86e388207fd03dcdf7b145b9ed080bf024
20641 Author: Stefan Roese <sr@denx.de>
20642 Date: Tue Jun 19 17:22:44 2007 +0200
20644 ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board
20646 This patch adds a board command to configure the I2C bootstrap EEPROM
20647 values. Right now 533 and 667MHz are supported for booting either via NOR
20648 or NAND FLASH. Here the usage:
20650 => bootstrap 533 nor ;to configure the board for 533MHz NOR booting
20651 => bootstrap 667 nand ;to configure the board for 667MHz NNAND booting
20653 Signed-off-by: Stefan Roese <sr@denx.de>
20655 commit df8a24cdd30151505cf57bbee5289e91bf53bd1b
20656 Author: Stefan Roese <sr@denx.de>
20657 Date: Tue Jun 19 16:42:31 2007 +0200
20659 [ppc4xx] Fix problem with NAND booting on AMCC Acadia
20661 The latest changes showed a problem with the location of the NAND-SPL
20662 image in the OCM and the init-data area (incl. cache). This patch
20663 fixes this problem.
20665 Signed-off-by: Stefan Roese <sr@denx.de>
20667 commit 86ba99e34194394052d24c04dc40d1263d29a26f
20668 Author: Stefan Roese <sr@denx.de>
20669 Date: Tue Jun 19 16:40:58 2007 +0200
20671 [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c
20673 Signed-off-by: Stefan Roese <sr@denx.de>
20675 commit 8e585f02f82c17cc66cd229dbf0fd3066bbbf658
20676 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
20677 Date: Mon Jun 18 13:50:13 2007 -0500
20679 Added M5329AFEE and M5329BFEE Platforms
20681 Added board/freescale/m5329evb, cpu/mcf532x, drivers/net,
20682 drivers/serial, immap_5329.h, m5329.h, mcfrtc.h,
20683 include/configs/M5329EVB.h, lib_m68k/interrupts.c, and
20686 Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c,
20687 common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h,
20688 include/asm-m68k/io.h, include/asm-m68k/mcftimer.h,
20689 include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h,
20690 include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c,
20691 lib_m68k/time.c, net/eth.c and rtc/Makefile
20693 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
20695 commit 093172f08d6afb3f34d8a2f26ee0ee874261cf27
20696 Author: Michal Simek <monstr@monstr.eu>
20697 Date: Sun Jun 17 19:04:11 2007 +0200
20699 [fix] email reparation
20701 commit 3666afffe7baf859c6ae0ce2bebbc8ab7e512ddc
20702 Author: Michal Simek <monstr@monstr.eu>
20703 Date: Sun Jun 17 19:03:21 2007 +0200
20705 [FIX] fix microblaze file permitission
20707 commit e73846b7cf1e29ae635bf9bb5570269663df2ee5
20708 Author: Stefan Roese <sr@denx.de>
20709 Date: Fri Jun 15 11:33:41 2007 +0200
20711 [ppc4xx] Change lwmon5 port to work with recent 440 exception rework
20713 Now CONFIG_440 has to be defined in all PPC440 board config files.
20715 Signed-off-by: Stefan Roese <sr@denx.de>
20717 commit efa35cf12d914d4caba942acd5a6c45f217de302
20718 Author: Grzegorz Bernacki <gjb@semihalf.com>
20719 Date: Fri Jun 15 11:19:28 2007 +0200
20721 ppc4xx: Clean up 440 exceptions handling
20723 - Introduced dedicated switches for building 440 and 405 images required
20724 for 440-specific machine instructions like 'rfmci' etc.
20726 - Exception vectors moved to the proper location (_start moved away from
20727 the critical exception handler space, which it occupied)
20729 - CriticalInput now serviced (with default handler)
20731 - MachineCheck properly serviced (added a dedicated handler and return
20734 - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused,
20735 unhandled and those not relevant for 4xx were eliminated)
20737 - Eliminated Linux leftovers, removed dead code
20739 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
20740 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
20741 Signed-off-by: Stefan Roese <sr@denx.de>
20743 commit b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2
20744 Author: Stefan Roese <sr@denx.de>
20745 Date: Fri Jun 15 08:18:01 2007 +0200
20747 [ppc4xx] Add initial lwmon5 board support
20749 This patch adds initial support for the Liebherr lwmon5 board euqipped
20750 with an AMCC 440EPx PowerPC.
20752 Signed-off-by: Stefan Roese <sr@denx.de>
20754 commit 85f737376d5ff3d5f0d45a8b657686326d175307
20755 Author: Stefan Roese <sr@denx.de>
20756 Date: Fri Jun 15 07:39:43 2007 +0200
20758 [ppc4xx] Extend 44x GPIO setup with default output state
20760 The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup
20761 is extended with the default GPIO output state (level).
20763 Signed-off-by: Stefan Roese <sr@denx.de>
20765 commit dbca208518e5e7f01a6420588d1cd6e60db74c2b
20766 Author: Stefan Roese <sr@denx.de>
20767 Date: Thu Jun 14 11:14:32 2007 +0200
20769 [ppc4xx] Extend program_tlb() with virtual & physical addresses
20771 Now program_tlb() allows to program a TLB (or multiple) with
20772 different virtual and physical addresses. With this change, now one
20773 physical region (e.g. SDRAM) can be mapped 2 times, once with caches
20774 diabled and once with caches enabled.
20776 Signed-off-by: Stefan Roese <sr@denx.de>
20778 commit 9912121f7ed804ea58fd62f3f230b5dcfc357d88
20779 Author: Detlev Zundel <dzu@denx.de>
20780 Date: Wed May 23 19:02:41 2007 +0200
20782 Change 'repeatable' attribute of some commands to sensible values.
20784 Most prominently this changes 'erase' to be non-repeatable.
20786 Signed-off-by: Detlev Zundel <dzu@denx.de>
20788 commit 5afb202093f6a001797db92cf695b93a70ea9ab4
20789 Author: Detlev Zundel <dzu@denx.de>
20790 Date: Wed May 23 18:47:48 2007 +0200
20792 Fix 'run' not to continue after interrupted command
20794 Signed-off-by: Detlev Zundel <dzu@denx.de>
20796 commit 9b7464a2c88614e1061f509c48930a3d240d1a35
20797 Author: Jason Jin <Jason.jin@freescale.com>
20798 Date: Mon Jun 11 15:14:24 2007 +0200
20800 USB: This patch fix readl in ohci swap reg access.
20802 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
20804 commit 8f8416fada9faf94b9a92f21fe6000643cb521d5
20805 Author: Bartlomiej Sieka <tur@semihalf.com>
20806 Date: Fri Jun 8 14:52:22 2007 +0200
20808 TQM5200: Add Flat Device Tree support, update default env. accordingly.
20810 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
20811 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
20813 commit 9045f33c023f698660a2e45d1b2194c0711abebc
20814 Author: Wolfgang Denk <wd@denx.de>
20815 Date: Fri Jun 8 10:24:58 2007 +0200
20817 Fix config problems on SC3 board; make ide_reset_timeout work.
20819 commit fba3fb0449b8a54542aed1e729de76e7f5a2ff1b
20820 Author: Benoît Monin <bmonin@adeneo.eu>
20821 Date: Fri Jun 8 09:55:24 2007 +0200
20823 [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE
20825 Set the correct value in GPIOx_TCR when configuring the gpio
20826 with CFG_440_GPIO_TABLE.
20828 Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
20829 Signed-off-by: Stefan Roese <sr@denx.de>
20831 commit f539edc076cfe52bff919dd512ba8d7af0e22092
20832 Author: Vadim Bendebury <vbendeb@google.com>
20833 Date: Thu May 24 15:52:25 2007 -0700
20835 cosmetic changes to bcm570x driver
20837 This is a cosmetic only changes submission.
20838 It affects files relevant to bcm570x driver.
20839 the commands used to generate this change was
20842 Lindent -pcs -l80 bcm570x.c bcm570x_lm.h bcm570x_mm.h tigon3.c tigon3.h
20844 The BMW target (the only one using this chip so far) builds cleanly, the
20845 `before and after' generated object files for drivers/bcm570x.c and
20846 drivers/tigon3.o are identical as reported by objdump -d
20848 Signed-off-by: Vadim Bendebury <vbendeb@google.com>
20849 Signed-off-by: Ben Warren <bwarren@qstreams.com>
20851 commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7
20852 Author: Wolfgang Denk <wd@denx.de>
20853 Date: Wed Jun 6 16:26:56 2007 +0200
20855 Coding Style cleanup; generate new CHANGELOG file.
20857 Signed-off-by: Wolfgang Denk <wd@denx.de>
20859 commit 19d763c35e0b5568eaf0b8adbf7a68ccfe7fa243
20860 Author: Markus Klotzbuecher <mk@denx.de>
20861 Date: Wed Jun 6 11:49:44 2007 +0200
20863 TRAB, USB: update trab board configuration for use of generic ohci driver
20865 commit dace45acd1c1357daa9322099d07c9a9e08b0024
20866 Author: Markus Klotzbuecher <mk@denx.de>
20867 Date: Wed Jun 6 11:49:43 2007 +0200
20869 USB: ohci fixes and cleanup for ppc4xx and yosemite board.
20871 commit 72657570b61635c74fa0c3f0e9e7d0671a9d08df
20872 Author: Markus Klotzbuecher <mk@denx.de>
20873 Date: Wed Jun 6 11:49:43 2007 +0200
20875 USB: ohci fixes and cleanup for mpc5xxx and IceCube board config
20877 commit fc43be478f2aa37ce38acd85355038866e4162af
20878 Author: Markus Klotzbuecher <mk@denx.de>
20879 Date: Wed Jun 6 11:49:35 2007 +0200
20881 USB/OHCI: endianness cleanup in the generic ohci driver
20883 commit c440bfe6d6d92d66478a7e84402b31f48413617b
20884 Author: Stefan Roese <sr@denx.de>
20885 Date: Wed Jun 6 11:42:13 2007 +0200
20887 ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board
20889 This patch adds NAND booting support for the AMCC Acadia eval board.
20891 Please make sure to configure jumper J7 to position 2-3 when booting
20892 from NOR, and to position 1-2 when booting for NAND.
20894 I also added a board command to configure the I2C bootstrap EEPROM
20895 values. Right now only 267MHz is support for booting either via NOR
20896 or NAND FLASH. Here the usage:
20898 => bootstrap 267 nor ;to configure the board for 267MHz NOR booting
20899 => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting
20901 Signed-off-by: Stefan Roese <sr@denx.de>
20903 commit 18135125f909948b85d1d6881ab4ac0efb4a1c58
20904 Author: Rodolfo Giometti <giometti@linux.it>
20905 Date: Wed Jun 6 10:08:14 2007 +0200
20907 Files include/linux/byteorder/{big,little}_endian.h define
20908 __BIG_ENDIAN and __LITTLE_ENDIAN.
20910 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
20912 commit a81d1c0b85b13e9d45f2d87de96a51a6e0ef0f82
20913 Author: Zhang Wei <wei.zhang@freescale.com>
20914 Date: Wed Jun 6 10:08:14 2007 +0200
20916 Add USB PCI-OHCI, USB keyboard and event poll support to the
20917 MPC8641HPCN board config file.
20919 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
20921 commit 4dae14ce8fbdf380017dc54f172218e7d2acc889
20922 Author: Zhang Wei <wei.zhang@freescale.com>
20923 Date: Wed Jun 6 10:08:14 2007 +0200
20925 USB PCI-OHCI, interrupt pipe and usb event poll support
20927 This patch added USB PCI-OHCI chips support, interrupt pipe support
20928 and usb event poll support. For supporting the USB interrupt pipe, the
20929 globe urb_priv is moved to purb in ed struct. Now, we can process
20930 several urbs at one time. The interrupt pipe support codes are ported
20931 from Linux kernel 2.4.
20933 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
20935 commit fdcfaa1b02268b2899e374b35adf936c911a47eb
20936 Author: Zhang Wei <wei.zhang@freescale.com>
20937 Date: Wed Jun 6 10:08:13 2007 +0200
20939 USB event poll support
20941 This patch adds USB event poll support, which could be used in usbkbd
20942 and other usb devices driver when the asynchronous interrupt
20943 processing is supported.
20945 Signed-off-by: Zhang Wei <wei.zhang@freescale.com
20947 commit 9a1d00fa47c1e05e3fdb60b33213af4e18d4c18e
20948 Author: Rodolfo Giometti <giometti@linux.it>
20949 Date: Wed Jun 6 10:08:12 2007 +0200
20951 ISP116x: delay for crappy USB keys
20953 Using some (very) slow USB keys cause the USB host controller buffers
20954 are not ready to be read by the CPU so we need an extra delay before
20955 reading the USB storage data.
20957 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
20959 commit 09444143670c9c2243cb7aba9f70b3713d33bed1
20960 Author: Markus Klotzbuecher <mk@denx.de>
20961 Date: Wed Jun 6 10:08:12 2007 +0200
20963 Change duplicate usb_cpu_init_fail to usb_board_init_fail
20965 Thanks to Liew Tsi Chung <Tsi-chung.Liew@freescale.com> for pointing
20968 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
20970 commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e
20971 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
20972 Date: Tue Jun 5 12:30:52 2007 -0500
20974 mpc8641 image size cleanup
20976 e600 does not have a bootpg restriction.
20977 Move the version string to beginning of image at fff00000.
20978 Resetvec.S is not needed.
20979 Update flash copy instructions.
20980 Add tftpflash env variable
20982 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
20983 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20985 commit e3cbe1f93c5722f8ebbad468e30c069a2b511097
20986 Author: Benoît Monin <bmonin@adeneo.eu>
20987 Date: Mon Jun 4 08:36:05 2007 +0200
20989 [PATCH] Fix ppc4xx bootstrap letter displayed on startup
20991 The attached patch is mainly cosmetic, allowing u-boot to
20992 display the correct bootstrap option letter according to the
20995 The original patch was extended with 405EZ support by Stefan
20998 Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
20999 Signed-off-by: Stefan Roese <sr@denx.de>
21001 commit 5b1313fb2758ffce8b624457f777d8cc6709608d
21002 Author: Nikita V. Youshchenko <yoush@debian.org>
21003 Date: Wed May 23 12:45:19 2007 +0400
21005 fix compilation problem for mpc8349itx CFG_RAMBOOT
21007 Current include/configs/MPC8349ITX.h does contain some support for building
21008 image that will be started from memory (without putting in into flash).
21009 It could be triggered by building with TEXT_BASE set to a low value.
21011 However, this support is incomplete: using of low TEXT_BASE causes
21012 defining configuration macros in inconsistent way, which later leads
21013 to compilation errors. In particular. flash support is being disabled,
21014 but then flash structures get referenced.
21016 This patch fixes this, making it possible to build with low TEXT_BASE.
21018 Signed-Off-By: Nikita Youshchenko <yoush@debian.org>
21020 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
21022 commit 8a364f0970de49949d635e60accf463c6443ef8c
21023 Author: Nikita V. Youshchenko <yoush@debian.org>
21024 Date: Wed May 23 12:45:25 2007 +0400
21026 add missing 'console' var to default mpc8349itx config
21028 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
21030 commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7
21031 Author: Stefan Roese <sr@denx.de>
21032 Date: Fri Jun 1 16:18:17 2007 +0200
21034 ppc4xx: Add missing file for Bamboo NAND booting support
21036 Signed-off-by: Stefan Roese <sr@denx.de>
21038 commit 155a96478a0881e6da96cbbbcf34952d6a3b1b4b
21039 Author: Stefan Roese <sr@denx.de>
21040 Date: Fri Jun 1 15:58:19 2007 +0200
21042 ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz
21044 This patch undoes the patch by Jeff Mann with commit-id ada4697d. As
21045 suggested by AMCC it is not recommended to dynamically change the EBC
21046 speed after bootup. So we undo this change to be on the safe side.
21048 Signed-off-by: Stefan Roese <sr@denx.de>
21050 commit 9d9096043e8f713d4bf1743d32e1459e6a11644b
21051 Author: Stefan Roese <sr@denx.de>
21052 Date: Fri Jun 1 15:29:04 2007 +0200
21054 ppc4xx: Update Sequoia NAND booting support with ECC
21056 Signed-off-by: Stefan Roese <sr@denx.de>
21058 commit cf959c7d6687567c308e366e9581e1a5aff5cc5b
21059 Author: Stefan Roese <sr@denx.de>
21060 Date: Fri Jun 1 15:27:11 2007 +0200
21062 ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board
21064 This patch adds NAND booting support for the AMCC Bamboo eval board.
21065 Since the NAND-SPL boot image is limited to 4kbytes, this version
21066 only supports the onboard 64MBytes of DDR. The DIMM modules can't be
21067 supported, since the setup code for I2C DIMM autodetection and
21068 configuration is too big for this NAND bootloader.
21070 Signed-off-by: Stefan Roese <sr@denx.de>
21072 commit 42be56f53c8b107868e6125c8524ae84293e95a7
21073 Author: Stefan Roese <sr@denx.de>
21074 Date: Fri Jun 1 15:23:04 2007 +0200
21076 NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c
21078 The U-Boot NAND booting support is now extended to support ECC
21079 upon loading of the NAND U-Boot image.
21081 Tested on AMCC Sequoia (440EPx) and Bamboo (440EP).
21083 Signed-off-by: Stefan Roese <sr@denx.de>
21085 commit a471db07fbb65a841ffc9f4f112562b945230f98
21086 Author: Stefan Roese <sr@denx.de>
21087 Date: Fri Jun 1 15:19:29 2007 +0200
21089 ppc4xx: Prepare Bamboo port for NAND booting support
21091 This patch updates the "normal" Bamboo NOR booting port, so
21092 that it is compatible with the coming soon NAND booting
21095 It also enables the 2nd NAND flash on the Bamboo.
21097 Signed-off-by: Stefan Roese <sr@denx.de>
21099 commit 53ad02103fb8be4138a9937a8ab91fcdff7b4987
21100 Author: Stefan Roese <sr@denx.de>
21101 Date: Fri Jun 1 15:16:58 2007 +0200
21103 ppc4xx: Update in_be32() functions and friends to latest Linux version
21105 Signed-off-by: Stefan Roese <sr@denx.de>
21107 commit 91da09cfbce0c1de05d6d84aa8363d666fa7ea3c
21108 Author: Stefan Roese <sr@denx.de>
21109 Date: Fri Jun 1 15:15:12 2007 +0200
21111 NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c
21113 This patch adds hardware ECC support to the NDFC driver. It also
21114 changes the register access from using the "simple" in32/out32
21115 functions to the in_be32/out_be32 functions, which make sure
21116 that the access is correctly synced. This is the only recommended
21117 access to SoC registers in the current Linux kernel.
21119 Signed-off-by: Stefan Roese <sr@denx.de>
21121 commit 17b5e862287cca76f19dcf8b741e61a7d06617f2
21122 Author: Stefan Roese <sr@denx.de>
21123 Date: Fri Jun 1 15:12:15 2007 +0200
21125 NAND: Update nand_ecc.c to latest Linux version
21127 This patch updates the nand_ecc code to the latest Linux version.
21128 The main reason for this is the more compact code. This makes
21129 it possible to include the ECC code into the NAND bootloader
21130 image (NAND_SPL) for PPC4xx.
21132 Signed-off-by: Stefan Roese <sr@denx.de>
21134 commit d2d432760d2199d0e8558fdd9d1789b8131abcf7
21135 Author: Stefan Roese <sr@denx.de>
21136 Date: Fri Jun 1 15:09:50 2007 +0200
21138 ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo
21140 Signed-off-by: Stefan Roese <sr@denx.de>
21142 commit e4bbed2803a2ad0521c7362f5d3e065f99abaedc
21143 Author: Stefan Roese <sr@denx.de>
21144 Date: Fri Jun 1 13:45:24 2007 +0200
21146 ppc4xx: Change Luan config file to support ECC
21148 With the updated 44x DDR2 driver the Luan board now supports
21149 ECC generation and checking.
21151 Signed-off-by: Stefan Roese <sr@denx.de>
21153 commit 7187db73491c8de0fb56efb5e5134ba5ec443089
21154 Author: Stefan Roese <sr@denx.de>
21155 Date: Fri Jun 1 13:45:00 2007 +0200
21157 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
21159 Add config option for 180 degree advance clock control as needed
21160 for the AMCC Luan eval board.
21162 Signed-off-by: Stefan Roese <sr@denx.de>
21164 commit ee1529838abbfaa35f14e3ffbeaaba693159475f
21165 Author: Wolfgang Denk <wd@denx.de>
21166 Date: Thu May 31 17:20:09 2007 +0200
21168 Add support for STX GP3SSA (stxssa) Board with 4 MiB flash.
21170 Signed-off-by: Wolfgang Denk <wd@denx.de>
21172 commit 7049288fb1f16f1b317140226cdebd07bd416395
21173 Author: Bartlomiej Sieka <tur@semihalf.com>
21174 Date: Sun May 27 17:26:46 2007 +0200
21176 Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.
21178 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
21180 commit 4520fd4d2c450da49637216aa0e53739b61c60ac
21181 Author: Bartlomiej Sieka <tur@semihalf.com>
21182 Date: Sun May 27 17:06:36 2007 +0200
21184 Motion-PRO: Add support for redundant environment.
21186 Enable redundant environment, add a MTD partition for it; also add env.
21187 variable command for passing MTD partitions to the kernel command line.
21189 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
21190 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
21192 commit a26eabeec31746f06d309103690892805696e344
21193 Author: Bartlomiej Sieka <tur@semihalf.com>
21194 Date: Sun May 27 17:05:11 2007 +0200
21196 Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes.
21198 Allow passing longer command line to the kernel - useful especially
21199 for passing MTD partition layout.
21201 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
21202 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
21204 commit 9160b96f71483a116de81c68985e8ee306d36764
21205 Author: Bartlomiej Sieka <tur@semihalf.com>
21206 Date: Sun May 27 17:04:18 2007 +0200
21208 Fix: Add missing NULL termination in strings expanded by macros parser.
21210 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
21211 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
21213 commit 630ec84aef7228fc1dbfb38dec78541403a786cd
21214 Author: Bartlomiej Sieka <tur@semihalf.com>
21215 Date: Sun May 27 17:03:37 2007 +0200
21217 Motion-PRO: Update EEPROM's page write bits and write delay.
21219 Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A
21220 have a page write capability of two bytes", and "This device offers fast (1ms)
21221 byte write". Add 3ms of extra delay.
21223 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
21224 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
21226 commit c00125e07c1ebc125bab40e1e18bceed8be0c162
21227 Author: Bartlomiej Sieka <tur@semihalf.com>
21228 Date: Sun May 27 16:58:45 2007 +0200
21230 MPC5XXX, Motion-PRO: Fix PHY initialization problem.
21232 After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which
21233 networking does not function. This commit switches PHY to TX mode by clearing
21234 the FX_SEL bit of Mode Control Register. It also reverses commit
21235 008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround.
21237 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
21238 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
21240 commit 93b78f534a6e708b4cf1a4ffb4d8438c67a007db
21241 Author: Bartlomiej Sieka <tur@semihalf.com>
21242 Date: Sun May 27 16:57:15 2007 +0200
21244 Motion-PRO: Add support for the temperature sensor.
21246 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
21247 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
21249 commit c75e639630cc132dc19cd1ecda5922c0db0bfbba
21250 Author: Bartlomiej Sieka <tur@semihalf.com>
21251 Date: Sun May 27 16:55:23 2007 +0200
21253 Motion-PRO: Add displaying of CPLD revision information during boot.
21255 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
21256 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
21258 commit c99512d6bd3973f01ca2fc4896d829b46e68f150
21259 Author: Bartlomiej Sieka <tur@semihalf.com>
21260 Date: Sun May 27 16:53:43 2007 +0200
21262 MPC5xxx: Change names of defines related to IPB and PCI clocks.
21264 Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining
21265 them does not cause PCI or IPB clocks to run at the specified speed.
21266 Instead, they configure divisors used to calculate said clocks. This
21267 patch renames the defines according to their real function.
21269 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
21270 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
21272 commit a11c0b85dc3664bb3c1e781137118730c8f619ab
21273 Author: Bartlomiej Sieka <tur@semihalf.com>
21274 Date: Sun May 27 16:51:48 2007 +0200
21276 Motion-PRO: Add LED support.
21278 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
21279 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
21280 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
21282 commit 7ebb4479b07ff294eb4d76e420753a0349f7c93b
21283 Author: Ulf Samuelsson <ulf@atmel.com>
21284 Date: Thu May 24 12:12:47 2007 +0200
21286 [PATCH][NAND] Define the Vendor Id for Micron NAND Flash
21288 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
21289 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
21290 Signed-off-by: Stefan Roese <sr@denx.de>
21292 commit d756894722c888d09a9fa1df8323753772d3dcce
21293 Author: Stefan Roese <sr@denx.de>
21294 Date: Thu May 24 09:49:00 2007 +0200
21296 ppc4xx: Fix small 405EZ OCM initilization bug in start.S
21298 As pointed out by Bruce Adler <bruce.adler@acm.org> this patch
21299 fixes a small bug in the 405EZ OCM initialization. Thanks for
21302 Signed-off-by: Stefan Roese <sr@denx.de>
21304 commit 5d4a179013d59a76446462e1eb0a969fba63eb81
21305 Author: Stefan Roese <sr@denx.de>
21306 Date: Thu May 24 08:22:09 2007 +0200
21308 ppc4xx: Update AMCC Acadia support for board revision 1.1
21310 This patch updates the Acadia (405EZ) support for the new 1.1 board
21311 revision. It also adds support for NAND FLASH via the 4xx NDFC.
21313 Please note that the jumper J7 must be in position 2-3 for this
21314 NAND support. Position 1-2 is for NAND booting only. NAND booting
21315 support will follow later.
21317 Signed-off-by: Stefan Roese <sr@denx.de>
21319 commit 822d55365bb557e084d0e33625a6dedcc866110b
21320 Author: Jon Loeliger <jdl@freescale.com>
21321 Date: Wed May 23 14:09:46 2007 -0500
21323 Add LIST_86xx MAKEALL target for PowerPC builds.
21325 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21327 commit 9f0077abd69f7a7c756a915b961037302be3e6f2
21328 Author: Stefan Roese <sr@denx.de>
21329 Date: Tue May 22 12:48:09 2007 +0200
21331 ppc4xx: Use do { ... } while (0) for CPR & SDR access macros
21333 Signed-off-by: Stefan Roese <sr@denx.de>
21335 commit 6f3dfc139a838b0841c151efe00ad47db2366e79
21336 Author: Stefan Roese <sr@denx.de>
21337 Date: Tue May 22 12:46:10 2007 +0200
21339 ppc4xx: Add 405 support to 4xx NAND driver ndfc.c
21341 This patch adds support for 405 PPC's to the 4xx NAND driver
21342 ndfc.c. This is in preparation for the new AMCC 405EZ.
21344 Signed-off-by: Stefan Roese <sr@denx.de>
21346 commit 10603d76767426be803dadd4fb688b97eb69481c
21347 Author: Stefan Roese <sr@denx.de>
21348 Date: Mon May 21 07:41:22 2007 +0200
21350 ppc4xx: Fix problem in 405EZ OCM initialization
21352 As spotted by Bruce Adler this patch fixes an initialization problem
21355 Signed-off-by: Stefan Roese <sr@denx.de>
21357 commit 3e3b956906eba9e4ad7931581ecedaad10eccce8
21358 Author: Peter Pearse <peter.pearse@arm.com>
21359 Date: Fri May 18 16:47:03 2007 +0100
21361 Reduce line lengths to 80 characters max.
21363 commit 93ef45c9ddfdd9fc17c4e74bd8e2f2456580eb72
21364 Author: Peter Pearse <peter.pearse@arm.com>
21365 Date: Fri May 18 14:34:07 2007 +0100
21367 Makefile permissions
21369 commit 1443a31457d68f7e8f0b9403e9832ec1e79dc59d
21370 Author: Peter Pearse <peter.pearse@arm.com>
21371 Date: Fri May 18 14:33:11 2007 +0100
21373 Makefile permissions
21375 commit 255a3577c848706441daee0174543efe205a77f8
21376 Author: Kim Phillips <kim.phillips@freescale.com>
21377 Date: Wed May 16 16:52:19 2007 -0500
21379 Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
21381 For all practical u-boot purposes, TSECs don't differ throughout the
21382 mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx.
21384 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
21386 commit 70124c2602ae2d4c5d3dba05b482d91548242de8
21387 Author: Stefano Babic <sbabic@denx.de>
21388 Date: Wed May 16 14:49:12 2007 +0200
21390 Fix compile problem cause my Microblaze merge
21392 Signed-off-by: Stefano Babic <sbabic@denx.de>
21394 commit ada4697d0230d6da552867777f98a67ec3ba2579
21395 Author: Jeffrey Mann <mannj@embeddedplanet.com>
21396 Date: Wed May 16 13:23:10 2007 +0200
21398 [PATCH] Run new sequoia boards with an EBC speed of 83MHz
21400 Because the Sequoia board does not boot with an EBC faster than 66MHz,
21401 the clock divider are changed after the initial boot process.
21403 This allows for maximum clocking speeds to be achieved on newer boards.
21404 Sequoia boards with 666.66 MHz processors require that the EBC divider
21405 be set to 3 in order to start the initial boot process at a slower EBC
21406 speed. After the initial boot process, the divider can be set back to 2,
21407 which will cause the boards to run at 83.333MHz. This is backward
21408 compatible with boards with 533.33 MHz processors, as these boards will
21409 already be set with an EBC divider of 2.
21411 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
21413 commit a7676ea7732f3c596805079fed7e5c9fac652cfc
21414 Author: Wolfgang Denk <wd@denx.de>
21415 Date: Wed May 16 01:16:53 2007 +0200
21417 Minor Coding Style cleanup, update CHANGELOG.
21419 Signed-off-by: Wolfgang Denk <wd@denx.de>
21421 commit d62f64cc23a940eafe712c776b3249e4160753d1
21422 Author: Wolfgang Denk <wd@denx.de>
21423 Date: Wed May 16 00:13:33 2007 +0200
21425 Coding Style Cleanup, new CHANGELOG
21427 commit 3162eb836903c8b247fdc7470dd39bfa6996f495
21428 Author: Wolfgang Denk <wd@denx.de>
21429 Date: Tue May 15 23:38:05 2007 +0200
21431 Minor coding style cleanup.
21433 commit 66d9dbec1cc27d6398ee6cf84639dbe14971251e
21434 Author: mushtaq khan <mushtaq_k@procsys.com>
21435 Date: Fri Apr 20 14:23:02 2007 +0530
21437 Add driver for S-ATA-controller on Intel processors with South
21438 Bridge, ICH-5, ICH-6 and ICH-7.
21442 1. Code is divided in to two files. All functions, which are
21443 controller specific are kept in "drivers/ata_piix.c" file and
21444 functions, which are not controller specific, are kept in
21445 "common/cmd_sata.c" file.
21447 2. Reading and Writing from the S-ATA drive is done using PIO method.
21449 3. Driver can be configured for 48-bit addressing by defining macro
21450 CONFIG_LBA48, if this macro is not defined driver uses the 28-bit
21453 4. S-ATA read function is hooked to the File system, commands like
21454 ext2ls and ext2load file can be used. This has been tested.
21456 5. U-Boot command "SATA_init" is added, which initializes the S-ATA
21457 controller and identifies the S-ATA drives connected to it.
21459 6. U-Boot command "sata" is added, which is used to read/write, print
21460 partition table and get info about the drives present. This I have
21461 implemented in same way as "ide" command is implemented in U-Boot.
21463 7. This driver is for S-ATA in native mode.
21465 8. This driver does not support the Native command queuing and
21468 Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
21470 commit 644e6fb4eb8be90ea04ba34b643a8bf019d680e0
21471 Author: mushtaq khan <mushtaq_k@procsys.com>
21472 Date: Mon Apr 30 15:57:22 2007 +0530
21474 Fixes bug clearing the bss section for i386
21477 There is a bug in the code of clearing the bss section for processor
21478 i386.(File: cpu/i386/start.S)
21479 In the code, bss_start addr (starting addr of bss section) is put into
21480 the register %eax, but the code which clears the bss section refers to
21481 the addr pointed by %edi.
21483 This patch fixes this bug by putting bss_start into %edi register.
21485 Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
21487 commit c3243cf7b490057277d61acffe4ad0946f9eb4a4
21488 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
21489 Date: Mon Apr 30 16:47:28 2007 -0500
21491 Add support for BCM5464 Quad Phy
21493 Added support for Broadcom's BCM5464 Quad Phy
21495 Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
21497 commit 1b305bdc754c8468e1d5d858f5dcf8a7a0a4bb7a
21498 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
21499 Date: Wed May 9 08:10:57 2007 +0800
21501 Search the exception table with linear algorithm
21503 Search the exception table with linear algorithm instead of
21504 bisecting algorithm.
21505 Because the exception table might be unsorted.
21507 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
21509 commit 5dfaa50eb819686bfba1927e8c5b8a70a4d65fd3
21510 Author: Aubrey.Li <aubrey.adi@gmail.com>
21511 Date: Mon May 14 11:47:35 2007 +0800
21513 Fix compilation issues on MACOSX
21515 Singed-off-by: Marc Hoffman <Marc.Hoffman@analog.com>
21516 Signed-off-by: Aubrey Li <aubrey.adi@gmail.com>
21518 commit 56fd7162985c412317bbf763a225fba23c64fd31
21519 Author: Stephen Williams <steve@icarus.com>
21520 Date: Tue May 15 07:55:42 2007 -0700
21522 Fix for compile of JSE target
21524 The attached patch fixes the compile of the JSE board in the
21525 denx git as of 14 may 2007. It is an extremely simple patch,
21526 it just adds the missing define of CFG_SYSTEMACE_WIDTH.
21528 Fix to compile JSE against 20070514 git of u-boot
21530 commit 69df3c4da0c93017cceb25a366e794570bd0ed98
21531 Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
21532 Date: Sun May 13 21:01:03 2007 +0900
21534 sh: MS7750SE support.
21536 This adds support for the Hitachi MS7750SE.
21538 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
21540 commit 0b135cfc2e524dc249b75057b55dd4cc09842e27
21541 Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
21542 Date: Sun May 13 20:58:00 2007 +0900
21544 sh: First support code of SuperH.
21546 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
21548 commit 61936667e86a250ae12fd2dc189d3588f0a59e0b
21549 Author: Stefan Roese <sr@denx.de>
21550 Date: Fri May 11 12:01:49 2007 +0200
21552 ppc4xx: Add mtcpr/mfcpr access macros
21554 Signed-off-by: Stefan Roese <sr@denx.de>
21556 commit 343c48bd84606c4025c8a7c7263fda465d6e284c
21557 Author: Stefan Roese <sr@denx.de>
21558 Date: Fri May 11 12:01:06 2007 +0200
21560 ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too
21562 Signed-off-by: Stefan Roese <sr@denx.de>
21564 commit 7d98ba770a7eaefa29ce927f31a0956df85bf650
21565 Author: Piotr Kruszynski <ppk@semihalf.com>
21566 Date: Thu May 10 16:55:52 2007 +0200
21568 [Motion-PRO] Add MTD and JFFS2 support, also add default partition
21571 commit 65fb6a676e821f9570a2a376dc204bf611ce5f81
21572 Author: Peter Pearse <peter.pearse@arm.com>
21573 Date: Wed May 9 11:42:44 2007 +0100
21575 Add the board directory for SMN42
21577 commit 160131bf965785419626df6c388729fe0b597992
21578 Author: Peter Pearse <peter.pearse@arm.com>
21579 Date: Wed May 9 11:41:58 2007 +0100
21581 Add the files for the SMN42 board
21583 commit 5c6d2b5a500f8c49670de8910150b78a41f781fc
21584 Author: Peter Pearse <peter.pearse@arm.com>
21585 Date: Wed May 9 11:40:34 2007 +0100
21587 Remove the deleted files for the SMN42 patch
21589 commit b0d8f5bf0d215adc9424cb228b2484dbf07f7761
21590 Author: Peter Pearse <peter.pearse@arm.com>
21591 Date: Wed May 9 11:37:56 2007 +0100
21593 New board SMN42 branch
21595 commit 29f3be0caf0799ca6b89dfd9824c15619a50000f
21596 Author: Peter Pearse <peter.pearse@arm.com>
21597 Date: Wed May 9 10:24:38 2007 +0100
21599 Makefile permissions
21601 commit b84289b595731e8851df46e893845cc1322c9b9b
21602 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
21603 Date: Tue May 8 14:17:07 2007 -0500
21605 8641hpcn: Fix Makefile after moving pixis to board/freescale.
21607 The OBJTREE != SRCTREE build scenario was broken.
21610 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
21611 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21613 commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1
21614 Author: Michal Simek <monstr@monstr.eu>
21615 Date: Tue May 8 15:57:43 2007 +0200
21617 add: reading special purpose registers
21619 commit 1a50f164beb065f360fbddb76029607d6b099698
21620 Author: Michal Simek <monstr@monstr.eu>
21621 Date: Tue May 8 14:52:52 2007 +0200
21623 add: Microblaze V5 exception handling
21625 commit ab874d5047e5d30dbc1e517ff26083efffa98ecb
21626 Author: Michal Simek <monstr@monstr.eu>
21627 Date: Tue May 8 14:39:11 2007 +0200
21629 add: FSL control read and write
21631 commit de1de02a7cbf05e6b63e0d8ffc624f12493f6ba3
21632 Author: Piotr Kruszynski <ppk@semihalf.com>
21633 Date: Tue May 8 13:05:44 2007 +0200
21635 [Motion-PRO] Add support for I2C, EEPROM and RTC.
21637 commit fa5c2ba123b1bf88455bfc21db5e786ca045029d
21638 Author: Bartlomiej Sieka <tur@semihalf.com>
21639 Date: Tue May 8 10:23:56 2007 +0200
21641 [Motion-PRO] Add ATA support. Add CF-booting commands to the default
21644 commit 06241d50a3ab1b20a0b08baeeaffcaa23ae4b839
21645 Author: Bartlomiej Sieka <tur@semihalf.com>
21646 Date: Tue May 8 09:39:12 2007 +0200
21648 [Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This
21649 eliminates networking problems in Linux (timeouts).
21651 commit 1f1369c34b629be94702684d41d3fddf0f6193e7
21652 Author: Bartlomiej Sieka <tur@semihalf.com>
21653 Date: Tue May 8 09:21:57 2007 +0200
21655 [Motion-PRO] Enable Flat Device Tree support and modify default environment
21656 to allow booting of FDT-expecting kernels.
21658 commit fb05f6da35ea1c15c553abe6f23f656bf18dc5db
21659 Author: Michal Simek <monstr@monstr.eu>
21660 Date: Mon May 7 23:58:31 2007 +0200
21662 new: USE_MSR_INTR support
21664 commit 008861a2f3ef2c062744d733787c7e530a1b8761
21665 Author: Bartlomiej Sieka <tur@semihalf.com>
21666 Date: Mon May 7 22:36:15 2007 +0200
21668 [MPC5xxx] There are networking problems on the Motion-PRO board with
21669 current PHY initalization code (tftp timeouts all the time). This commit
21670 temporarily disables PHY initalization sequence to make the networking
21671 operational, until a fix is found.
21673 commit abca901869c3760b6c5fecb825db6c1d91a78a93
21674 Author: Wolfgang Denk <wd@denx.de>
21675 Date: Mon May 7 22:10:36 2007 +0200
21677 Get rid of duplicated file (see include/configs/sbc8560.h instead)
21679 Signed-off-by: Wolfgang Denk <wd@denx.de>
21681 commit 207b7b2c9d9752e0f6478c30c29b7087f6e6cbb6
21682 Author: Wolfgang Denk <wd@denx.de>
21683 Date: Mon May 7 22:07:08 2007 +0200
21685 Get rid of duplicated file (see doc/README.SBC8560 instead)
21687 Signed-off-by: Wolfgang Denk <wd@denx.de>
21689 commit a7bac7e9b57ba948051beb19ec5be3a75ce75383
21690 Author: Michal Simek <monstr@monstr.eu>
21691 Date: Mon May 7 19:43:10 2007 +0200
21693 fix: read and write MSR - repair number of parameters
21695 commit 193b4a3bb3acaddf798da8de0da05d94ba8774ee
21696 Author: Jeffrey Mann <mannj@embeddedplanet.com>
21697 Date: Mon May 7 19:42:49 2007 +0200
21699 [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file
21701 A '3' got cut off in the formatting of the last patch to automatically
21702 change the clock speed of the system clock on sequoia board.
21704 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
21705 Signed-off-by: Stefan Roese <sr@denx.de>
21707 commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39
21708 Author: Michal Simek <monstr@monstr.eu>
21709 Date: Mon May 7 19:33:51 2007 +0200
21711 new: fsl interrupt support
21712 FSL_Has_data is connected to INTC.
21714 commit 792032baa7d625e34c981ab6df521911bd8dc861
21715 Author: Michal Simek <monstr@monstr.eu>
21716 Date: Mon May 7 19:30:12 2007 +0200
21718 fix: interrupt handler
21721 commit f3f001a341ef185d0f13841be5b5dc3395aacc31
21722 Author: Michal Simek <monstr@monstr.eu>
21723 Date: Mon May 7 19:25:08 2007 +0200
21725 fix: remove asm code
21727 commit fb7c2dbef02c9f6f8d7b04ec4c2bfb91418b9c01
21728 Author: Michal Simek <monstr@monstr.eu>
21729 Date: Mon May 7 19:12:43 2007 +0200
21731 fix: clean interrupt
21733 commit 42efed6130c8fcf7da881385b5427065d2801757
21734 Author: Michal Simek <monstr@monstr.eu>
21735 Date: Mon May 7 17:22:25 2007 +0200
21737 fix: interrupt handler for multiple sources
21739 commit 48fbd3a4cdabbebc1debd7eed73c00c2caf914f6
21740 Author: Michal Simek <monstr@monstr.eu>
21741 Date: Mon May 7 17:11:09 2007 +0200
21743 new: add writing to msr register
21745 commit 3a619dd7bed03e8b4d22a3911f90fd12af5376c2
21746 Author: Markus Klotzbuecher <mk@denx.de>
21747 Date: Mon May 7 16:43:56 2007 +0200
21749 Fix an ancient CHANGELOG conflict
21751 commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562
21752 Author: Timur Tabi <timur@freescale.com>
21753 Date: Sat May 5 08:12:30 2007 +0200
21755 5xxx: write MAC address to mac-address and local-mac-address
21757 Some device trees have a mac-address property, some have local-mac-address,
21758 and some have both. To support all of these device trees, ftp_cpu_setup()
21759 should write the MAC address to mac-address and local-mac-address, if they
21762 Signed-off-by: Timur Tabi <timur@freescale.com>
21763 Acked-by: Grant Likely <grant.likely@secretlab.ca>
21765 commit a9d87e2707dcb249f6bb7f7ff7e00acd8cda9fd2
21766 Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
21767 Date: Sun Apr 29 14:01:54 2007 +0200
21769 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
21771 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
21772 message. Use PVR to distinguish between the two variants, and print proper CPU
21775 Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
21776 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
21777 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
21779 commit 4ec5bd55ed1ffa91a774af298769621f4fbb18c1
21780 Author: Ladislav Michl <ladis@linux-mips.org>
21781 Date: Wed Apr 25 16:01:26 2007 +0200
21783 [PATCH] simplify silent console
21785 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
21786 Acked-by: Stefan Roese <sr@denx.de>
21788 commit b7598a43f2b421a713d8135e98a42c37d9eb9df0
21789 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
21790 Date: Mon Apr 23 15:30:39 2007 +0200
21792 [PATCH] Avoid assigning PCI resources from zero address
21794 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
21795 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
21796 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
21797 sentence about "0" being considered an invalid address) -- so, use a reasonable
21798 starting value of 0x1000 (that's what the most Linux archs are using).
21800 Alternatively, one might have fixed the calls to pci_set_region() individually
21801 (some code even seems to have taken care of this issue) but that would have
21802 been a lot more work. :-)
21804 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
21805 Acked-by: Stefan Roese <sr@denx.de>
21807 commit 9ffd451afeb08e5be7ddae680487ec962b2bca25
21808 Author: Jeffrey Mann <mannj@embeddedplanet.com>
21809 Date: Mon Apr 23 14:00:11 2007 +0200
21811 [patch] setenv(...) can delete environmentalvariables
21813 update setenv() function so that entering a NULL value for the
21814 variable's value will delete the environmental variable
21816 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
21817 Acked-by: Stefan Roese <sr@denx.de>
21819 commit ebd0a0ae05a44769c4e27458ad4e9f3438250443
21820 Author: Mike Frysinger <vapier@gentoo.org>
21821 Date: Mon Apr 23 13:54:24 2007 +0200
21823 [patch] use unsigned char in smc91111 driver for mac
21825 the v_mac variable in the smc91111 driver is declared as a signed char ...
21826 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
21827 because when it gets printed out, you get a display like:
21828 0xFFFFFFE0 and that's no good
21830 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
21832 commit ffc50f9bb194343c6303517a517708457a5eb6b8
21833 Author: Michal Simek <monstr@monstr.eu>
21834 Date: Sat May 5 18:54:42 2007 +0200
21836 new: FSL and MSR support #2
21838 commit f7e2e0eb0668136305f78bb9c21be79b48a34247
21839 Author: Michal Simek <monstr@monstr.eu>
21840 Date: Sat May 5 18:27:16 2007 +0200
21842 new: FSL and MSR support
21844 commit 2f15278c2eb911c668b4fe562130b78cf554d139
21845 Author: Wolfgang Denk <wd@denx.de>
21846 Date: Sat May 5 18:23:11 2007 +0200
21848 Coding stylke cleanup; update CHANGELOG.
21850 Signed-off-by: Wolfgang Denk <wd@denx.de>
21852 commit 885ec89b648a899a2f32393fd3ffd9f7234c4402
21853 Author: Wolfgang Denk <wd@denx.de>
21854 Date: Sat May 5 18:05:02 2007 +0200
21856 Add STX GP3 SSA board to MAKEALL script; update CHANGELOG.
21858 Signed-off-by: Wolfgang Denk <wd@denx.de>
21860 commit 5499645b3fe17a548af9dfc479ca6e2455f179a2
21861 Author: Wolfgang Denk <wd@denx.de>
21862 Date: Sat May 5 17:15:50 2007 +0200
21864 Make "file" command happy with some config.mk files; update CHANGELOG
21866 commit e3b8c78bc2489c27ae020986ef0eaca684866cef
21867 Author: Jeffrey Mann <mannj@embeddedplanet.com>
21868 Date: Sat May 5 08:32:14 2007 +0200
21870 ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz
21872 The AMCC Secquoia board has been changed in a new revision from using a
21873 33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD
21874 indicates the difference. This patch reads that bit and uses the correct
21875 clock speed for the board. This code is backward compatable will all
21876 prior boards. All prior boards will be read as 33.000.
21878 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
21879 Signed-off-by: Stefan Roese <sr@denx.de>
21881 commit f544ff6656fca263ed1ebe39899b6d95da67c8b8
21882 Author: Stefan Roese <sr@denx.de>
21883 Date: Sat May 5 08:29:01 2007 +0200
21885 ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting
21887 Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
21888 for the 4k NAND boot image so define bus_frequency to 133MHz here
21889 which is save for the refresh counter setup.
21891 Signed-off-by: Stefan Roese <sr@denx.de>
21893 commit 2f550ab976405300f5b07bf2890800840d0aa05f
21894 Author: Timur Tabi <timur@freescale.com>
21895 Date: Sat May 5 08:12:30 2007 +0200
21897 5xxx: write MAC address to mac-address and local-mac-address
21899 Some device trees have a mac-address property, some have local-mac-address,
21900 and some have both. To support all of these device trees, ftp_cpu_setup()
21901 should write the MAC address to mac-address and local-mac-address, if they
21904 Signed-off-by: Timur Tabi <timur@freescale.com>
21905 Acked-by: Grant Likely <grant.likely@secretlab.ca>
21907 commit a79886590593ba1d667c840caa4940c61639f18f
21908 Author: Thomas Knobloch <knobloch@siemens.com>
21909 Date: Sat May 5 07:04:42 2007 +0200
21911 NAND: Wrong calculation of page number in nand_block_bad()
21913 In case that there is no memory based bad block table available the
21914 function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call
21915 nand_block_bad() directly. When parameter 'getchip' is set to zero,
21916 nand_block_bad() will not right shift the offset to calculate the
21917 correct page number.
21919 Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
21920 Signed-off-by: Stefan Roese <sr@denx.de>
21922 commit 9877d7dcd1eebe61aa5d8b8ffe9c048ea426e6f6
21923 Author: Wolfgang Denk <wd@denx.de>
21924 Date: Fri May 4 10:02:33 2007 +0200
21926 Fix initrd length corruption in bootm command.
21928 When using FDT Images, the length of an inital ramdisk was
21929 overwritten (bug introduced by commit 87a449c8, 22 Aug 2006).
21931 Patches by Timur Tabi & Johns Daniel.
21933 Signed-off-by: Wolfgang Denk <wd@denx.de>
21935 commit 068aab660bc3912b930be5540e6b3f3fd6ad3c96
21936 Author: Kim Phillips <kim.phillips@freescale.com>
21937 Date: Thu May 3 19:43:52 2007 -0500
21939 mpc83xx: fix trivial error in MAKEALL
21941 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
21943 commit c64a89d6ce8584b9fc64f4e85da9ecac3cfc2c2a
21944 Author: Wolfgang Denk <wd@denx.de>
21945 Date: Thu May 3 16:34:41 2007 +0200
21947 Update board configuration for STX GP3SSA board:
21949 Enable hush shell, environment in flash rather in EEPROM,
21950 more user-friendly default environment, etc.
21951 The simple EEPROM environment can be selected easily in the board
21954 Signed-off-by: Wolfgang Denk <wd@denx.de>
21956 commit 2c6fb199dc5756fc72f49d1f4de105e089049d65
21957 Author: Wolfgang Denk <wd@denx.de>
21958 Date: Tue Apr 24 14:37:49 2007 +0200
21960 Cleanup STX GP3SSA code; fix build and compile problems.
21962 commit 35171dc04e028ecacc23ad916a66295472555dbf
21963 Author: Dan Malek <dan@embeddedalley.com>
21964 Date: Fri Jan 5 09:15:34 2007 +0100
21966 Add support for STX GP3SSA (stxssa) Board
21968 Signed-off-by Dan Malek, <dan@embeddedalley.com>
21970 commit f2134f8e9eb006bdcd729e89f309c07b2fa45180
21971 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
21972 Date: Wed May 2 13:31:53 2007 +0200
21974 macb: Don't restart autonegotiation if we already have link
21976 Rework macb_phy_init so that it doesn't attempt to re-negotiate if the
21977 link is already up.
21979 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
21981 commit 04fcb5d38bc90779cd9a710d60702075986f0e29
21982 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
21983 Date: Wed May 2 13:22:38 2007 +0200
21985 macb: Introduce a few barriers when dealing with DMA descriptors
21987 There were a few theoretical possibilities that the compiler might
21988 optimize away DMA descriptor reads and/or writes and thus cause
21989 synchronization problems with the hardware. Insert barriers where
21990 we depend on reads/writes actually hitting memory.
21992 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
21994 commit ffa621a0d12a1ccd81c936c567f8917a213787a8
21995 Author: Andy Fleming <afleming@freescale.com>
21996 Date: Sat Feb 24 01:08:13 2007 -0600
21998 Cleaned up some 85xx PCI bugs
22000 * Cleaned up the CDS PCI Config Tables and added NULL entries to
22002 * Fixed PCIe LAWBAR assignemt to use the cpu-relative address
22003 * Fixed 85xx PCI code to assign powar region sizes based on the
22004 config values (rather than hard-coding them)
22005 * Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address
22007 Signed-off-by: Andy Fleming <afleming@freescale.com>
22009 commit 6743105988fc44d5b0d30388c790607835aae7a6
22010 Author: Andy Fleming <afleming@freescale.com>
22011 Date: Mon Apr 23 02:54:25 2007 -0500
22013 Add support for the 8568 MDS board
22015 This included some changes to common files:
22016 * Add 8568 processor SVR to various places
22017 * Add support for setting the qe bus-frequency value in the dts
22018 * Add the 8568MDS target to the Makefile
22020 Signed-off-by: Andy Fleming <afleming@freescale.com>
22022 commit af1c2b84bf27c8565baddc82d1abb93700d10e2e
22023 Author: David Updegraff <dave@cray.com>
22024 Date: Fri Apr 20 14:34:48 2007 -0500
22026 Add support for treating unknown PHYs as generic PHYs.
22028 When bringing up u-boot on new boards, PHY support sometimes gets
22029 neglected. Most PHYs don't really need any special support,
22030 though. By adding a generic entry that always matches if nothing
22031 else does, we can provide support for "unsupported" PHYs for the
22034 The generic PHY driver supports most PHYs, including gigabit.
22036 Signed-off-by: David Updegraff <dave@cray.com>
22037 Signed-off-by: Andy Fleming <afleming@freescale.com>
22039 commit a75af9bfd8fff0499efdbb90601cec5a2afef117
22040 Author: James Yang <James.Yang@freescale.com>
22041 Date: Wed Feb 7 15:28:04 2007 -0600
22043 Conditionalize 8641 Rev1.0 MCM workarounds
22045 Signed-off-by: James Yang <James.Yang@freescale.com>
22046 Signed-off-by: Jon Loeliger <jdl@freescale.com>
22048 commit f64702b7fc8f8df39d31add770df6e372f9e9ce3
22049 Author: Timur Tabi <timur@freescale.com>
22050 Date: Mon Apr 30 13:59:50 2007 -0500
22052 Fix memory initialization on MPC8349E-mITX
22054 Define CFG_DDR_SDRAM_CLK_CNTL for the MPC8349E-mITX and MPC8349E-mITX-GP.
22055 This allows ddr->sdram_clk_cntl to be properly initialized. This is necessary
22056 on some ITX boards, notably those with a revision 3.1 CPU.
22058 Also change spd_sdram() in cpu/mpc83xx/spd_sdram.c to not write anything into
22059 ddr->sdram_clk_cntl if CFG_DDR_SDRAM_CLK_CNTL is not defined.
22061 Signed-off-by: Timur Tabi <timur@freescale.com>
22062 Acked-by: Michael Benedict <MBenedict@twacs.com>
22063 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22065 commit 54b2d434ae9d01787936f34fe1759cf3d7624ae3
22066 Author: Kim Phillips <kim.phillips@freescale.com>
22067 Date: Mon Apr 30 15:26:21 2007 -0500
22069 mpc83xx: replace elaborate boottime verbosity with 'clocks' command
22071 and fix CPU: to align with Board: display text.
22073 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22075 commit c1ab82669d9525998c34e802a12cad662723f22a
22076 Author: James Yang <James.Yang@freescale.com>
22077 Date: Fri Mar 16 13:02:53 2007 -0500
22079 Rewrote picos_to_clk() to avoid rounding errors.
22080 Clarified that conversion is to DRAM clocks rather than platform clocks.
22081 Made function static to spd_sdram.c.
22083 Signed-off-by: James Yang <James.Yang@freescale.com>
22084 Signed-off-by: Jon Loeliger <jdl@freescale.com>
22086 commit 8b39501d28754e72726ce7fb02310e56dbdf116a
22087 Author: Stefan Roese <sr@denx.de>
22088 Date: Sun Apr 29 14:13:01 2007 +0200
22090 ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver
22092 Signed-off-by: Stefan Roese <sr@denx.de>
22094 commit 864aa6a6a466fcb92bf32b1d7dba79cd709b52c9
22095 Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
22096 Date: Sun Apr 29 14:01:54 2007 +0200
22098 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
22100 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
22101 message. Use PVR to distinguish between the two variants, and print proper CPU
22104 Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
22105 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
22106 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
22108 commit 5c5d3242935cf3543af01142627494434834cf98
22109 Author: Kim Phillips <kim.phillips@freescale.com>
22110 Date: Wed Apr 25 12:34:38 2007 -0500
22112 mpc83xx: minor fixups for 8313rdb introduction
22114 commit ada4d40091f6ed4a4f0040e08d20db21967e4a67
22115 Author: Ladislav Michl <ladis@linux-mips.org>
22116 Date: Wed Apr 25 16:01:26 2007 +0200
22118 [PATCH] simplify silent console
22120 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
22121 Acked-by: Stefan Roese <sr@denx.de>
22123 commit 144876a380f5756f57412caf74c1d6dc201dd796
22124 Author: Michal Simek <monstr@monstr.eu>
22125 Date: Tue Apr 24 23:01:02 2007 +0200
22127 [PATCH] MTD partition support, JFFS2 support
22129 commit 37ed6cdd4159195bfad68d8a237f6adda8f482cb
22130 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
22131 Date: Tue Apr 24 14:03:45 2007 +0200
22133 ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content.
22135 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
22137 commit 66ed6cca3f340f7a8a06d9272ae2ef8e96f0273d
22138 Author: Andy Fleming <afleming@freescale.com>
22139 Date: Mon Apr 23 02:37:47 2007 -0500
22141 Reworked 85xx speed detection code
22143 Changed the code to read the registers and calculate the clock
22144 rates, rather than using a "switch" statement.
22146 Idea from Andrew Klossner <andrew@cesa.opbu.xerox.com>
22148 Signed-off-by: Andy Fleming <afleming@freescale.com>
22150 commit 81f481ca708ed6a56bf9c410e3191dbad581c565
22151 Author: Andy Fleming <afleming@freescale.com>
22152 Date: Mon Apr 23 02:24:28 2007 -0500
22154 Enable 8544 support
22156 * Add support to the Makefile
22157 * Add 8544 configuration support to the tsec driver
22158 * Add 8544 SVR numbers to processor.h
22160 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
22161 Signed-off-by: Jon Loeliger <jdl@freescale.com>
22163 commit 0d8c3a2096eaff8d7de89d45e9af4d4b0d4868fe
22164 Author: Andy Fleming <afleming@freescale.com>
22165 Date: Fri Feb 23 17:12:25 2007 -0600
22167 Support 1G size on 8548
22169 e500v2 and newer cores support 1G page sizes.
22171 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
22172 Signed-off-by: Andy Fleming <afleming@freescale.com>
22174 commit 45cef612cc601d2d1c890fbbd7cdc9609a189a46
22175 Author: Andy Fleming <afleming@freescale.com>
22176 Date: Fri Feb 23 17:11:16 2007 -0600
22178 Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nG
22180 The other pagesz constants use one letter to specify order of
22181 magnitude. Also change the one reference to it in mpc8548cds/init.S
22183 Signed-off-by: Andy Fleming <afleming@freescale.com>
22185 commit 1f9a318cea14272edd10d63739e2d326c90f430e
22186 Author: Andy Fleming <afleming@freescale.com>
22187 Date: Fri Feb 23 16:28:46 2007 -0600
22189 Only set ddrioovcr for 8548 rev1.
22191 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
22192 Signed-off-by: Andy Fleming <afleming@freescale.com>
22194 commit 9343dbf85bc03033f2102d8e8543567c2c1ad2d2
22195 Author: Andy Fleming <afleming@freescale.com>
22196 Date: Sat Feb 24 01:16:45 2007 -0600
22198 Tweak DDR ECC error counter
22200 Enable single-bit error counter when memory was cleared by ddr controller.
22202 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
22203 Signed-off-by: Andy Fleming <afleming@freescale.com>
22205 commit 85e7c7a45e3dd9c7ce3e722352ba60f8df1a7a4b
22206 Author: Timur Tabi <timur@freescale.com>
22207 Date: Mon Feb 12 13:34:55 2007 -0600
22209 85xx: write MAC address to mac-address and local-mac-address
22211 Some device trees have a mac-address property, some have local-mac-address,
22212 and some have both. To support all of these device trees, ftp_cpu_setup()
22213 should write the MAC address to mac-address and local-mac-address, if they
22216 Signed-off-by: Timur Tabi <timur@freescale.com>
22218 commit 03b81b48eec0ad249ec97a4ae16c36fa2e014ff4
22219 Author: Andy Fleming <afleming@freescale.com>
22220 Date: Mon Apr 23 01:44:44 2007 -0500
22222 Some 85xx cpu cleanups
22224 * Cleaned up the TSR[WIS] clearing
22225 * Cleaned up DMA initialization
22227 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
22228 Signed-off-by: Jon Loeliger <jdl@freescale.com>
22229 Acked-by: Andy Fleming <afleming@freescale.com>
22231 commit 151d5d992eab8c497b24c816c73dc1ad8bffb4eb
22232 Author: Andy Fleming <afleming@freescale.com>
22233 Date: Mon Apr 23 01:32:22 2007 -0500
22235 Add cpu support for the 8544
22237 Recognize new SVR values, and add a few register definitions
22239 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
22240 Signed-off-by: Jon Loeliger <jdl@freescale.com>
22241 Acked-by: Andy Fleming <afleming@freescale.com>
22243 commit 25d83d7f4ac65727182d8ddaf7ba42fa74cf65ae
22244 Author: Jon Loeliger <jdl@freescale.com>
22245 Date: Wed Apr 11 16:51:02 2007 -0500
22247 Add MPC8544DS basic port board files.
22249 Add board port under new board/freescale directory
22250 structure and reuse existing PIXIS FPGA support there.
22252 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
22253 Signed-off-by: Jon Loeliger <jdl@freescale.com>
22255 commit 0cde4b00fc7393b89f379d83a9d436dcb1334bfa
22256 Author: Jon Loeliger <jdl@freescale.com>
22257 Date: Wed Apr 11 16:50:57 2007 -0500
22259 Add MPC8544DS main configuration file.
22261 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
22262 Signed-off-by: Jon Loeliger <jdl@freescale.com>
22264 commit 362dd83077ac04c0296bca3e824ec2fb3d44d9d6
22265 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
22266 Date: Wed Dec 27 22:07:15 2006 +0300
22268 Fix PCI I/O space mapping on Freescale MPC85x0ADS
22270 The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit
22271 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc which failed to update the #define's
22272 describing the local address window used for the PCI I/O space accesses -- fix
22273 this and carry over the necessary changes into the MPC8560ADS code since the
22274 PCI I/O space mapping was also broken for this board (by the earlier commit
22275 087454609e47295443af793a282cddcd91a5f49c). Add the comments clarifying how
22276 the PCI I/O space must be mapped to all the MPC85xx board config. headers.
22278 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
22280 board/mpc8540ads/init.S | 4 ++--
22281 board/mpc8560ads/init.S | 4 ++--
22282 include/configs/MPC8540ADS.h | 5 ++---
22283 include/configs/MPC8541CDS.h | 2 +-
22284 include/configs/MPC8548CDS.h | 2 +-
22285 include/configs/MPC8560ADS.h | 8 ++++----
22286 6 files changed, 12 insertions(+), 13 deletions(-)
22288 commit 96629cbabdb727d4a5e62542deefc01d498db6dc
22289 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
22290 Date: Tue Dec 5 16:42:30 2006 +0800
22292 u-boot: Fix e500 v2 core reset bug
22294 The following patch fixes the e500 v2 core reset bug.
22295 For e500 v2 core, a new reset control register is added to reset the
22298 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
22300 commit 63247a5acd58032e6cf33f525bc3923b467bac88
22301 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
22302 Date: Wed Dec 20 11:01:00 2006 +0800
22304 u-boot: v2: Remove the fixed TLB and LAW entrynubmer
22306 Remove the fixed TLB and LAW entry nubmer. Use actually TLB and LAW
22307 entry number to control the loop. This can reduce the potential risk
22308 for the 85xx processor increasing its TLB adn LAW entry number.
22310 Signed-off-by: Swarthout Edward <swarthout@freescale.com>
22311 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
22313 commit 0b1934ba12fd408fcc3b8bd9f4b04864c42a42bf
22314 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
22315 Date: Mon Dec 18 17:01:04 2006 +0800
22317 u-boot: Fix the 85xxcds tsec bug
22319 Fix the 85xxcds tsec bug.
22320 When enable PCI, tsec.o should be added to u-boot.lds to make tsec work.
22322 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
22324 commit 7337b237ffc4aaf1b9467024fe472a880d852598
22325 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
22326 Date: Fri Dec 15 14:43:31 2006 +0800
22328 u-boot: Fix CPU2 errata on MPC8548CDS board
22330 This patch apply workaround of CPU2 errata on MPC8548CDS board.
22332 Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
22334 commit 39b18c4f3e0b6d0dc00f4e68bad2da3766c85f09
22335 Author: ebony.zhu@freescale.com <ebony.zhu@freescale.com>
22336 Date: Mon Dec 18 16:25:15 2006 +0800
22338 u-boot: Disables MPC8548CDS 2T_TIMING for DDR by default
22340 This patch disables MPC8548CDS 2T_TIMING for DDR by default.
22342 Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
22344 commit 41fb7e0f1ec9b91bdae2565bab5f2e3ee15039c7
22345 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
22346 Date: Thu Dec 14 14:14:55 2006 +0800
22348 u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board
22350 Enable PCI function and add PEX & rapidio memory map on MPC8548CDS
22352 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
22354 commit 96b8a05432f346f36493535c85320b70ec9c7c1b
22355 Author: Scott Wood <scottwood@freescale.com>
22356 Date: Mon Apr 16 14:54:15 2007 -0500
22358 mpc83xx: Add MPC8313ERDB support.
22360 Signed-off-by: Scott Wood <scottwood@freescale.com>
22362 commit 49ea3b6eafe606285ae4d5c378026153dde53200
22363 Author: Scott Wood <scottwood@freescale.com>
22364 Date: Mon Apr 16 14:34:21 2007 -0500
22366 mpc83xx: Add generic PCI setup code.
22368 Board code can now request the generic setup code rather than having to
22369 copy-and-paste it for themselves. Boards should be converted to use this
22370 once they're tested with it.
22372 Signed-off-by: Scott Wood <scottwood@freescale.com>
22374 commit 7c98e5193e93df6b9b651851d54b638a61ebb0ea
22375 Author: Scott Wood <scottwood@freescale.com>
22376 Date: Mon Apr 16 14:34:19 2007 -0500
22378 mpc83xx: Add 831x support to speed.c.
22380 Signed-off-by: Scott Wood <scottwood@freescale.com>
22382 commit 0f253283a32d91e06844d7f87f9b33f4f4fbce8f
22383 Author: Scott Wood <scottwood@freescale.com>
22384 Date: Mon Apr 16 14:34:18 2007 -0500
22386 mpc83xx: Add 831x support to global_data.h
22388 Signed-off-by: Scott Wood <scottwood@freescale.com>
22390 commit 95e7ef897e54591e615fc1b458b74c286fe1fb06
22391 Author: Scott Wood <scottwood@freescale.com>
22392 Date: Mon Apr 16 14:34:16 2007 -0500
22394 mpc83xx: Change PVR_83xx to PVR_E300C1-3, and update checkcpu().
22396 Rather than misleadingly define PVR_83xx as the specific type of 83xx
22397 being built for, the PVR of each core revision is defined. checkcpu() now
22398 prints the core that it detects, rather than aborting if it doesn't find
22399 what it thinks it wants.
22401 Signed-off-by: Scott Wood <scottwood@freescale.com>
22403 commit a35b0c4950d84cf9e3a9e32b916135956d1ac636
22404 Author: Scott Wood <scottwood@freescale.com>
22405 Date: Mon Apr 16 14:34:15 2007 -0500
22407 mpc83xx: Recognize SPR values for MPC8311 and MPC8313.
22409 Signed-off-by: Scott Wood <scottwood@freescale.com>
22411 commit d87c57b201b4572d16f1b642998faa00c9912b16
22412 Author: Scott Wood <scottwood@freescale.com>
22413 Date: Mon Apr 16 14:31:55 2007 -0500
22415 mpc83xx: Add register definitions for MPC831x.
22417 Signed-off-by: Scott Wood <scottwood@freescale.com>
22419 commit 7fc4c71a143be8666d70803fb25ae60379c95622
22420 Author: Stefan Roese <sr@denx.de>
22421 Date: Mon Apr 23 15:39:59 2007 +0200
22425 Signed-off-by: Stefan Roese <sr@denx.de>
22427 commit 38257988abfe74d459ca2ad748b109ca04e4efe1
22428 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
22429 Date: Mon Apr 23 15:30:39 2007 +0200
22431 [PATCH] Avoid assigning PCI resources from zero address
22433 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
22434 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
22435 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
22436 sentence about "0" being considered an invalid address) -- so, use a reasonable
22437 starting value of 0x1000 (that's what the most Linux archs are using).
22439 Alternatively, one might have fixed the calls to pci_set_region() individually
22440 (some code even seems to have taken care of this issue) but that would have
22441 been a lot more work. :-)
22443 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
22444 Acked-by: Stefan Roese <sr@denx.de>
22446 commit afb903a2eb9436baa9270ccc0c27082d86497d89
22447 Author: Jeffrey Mann <mannj@embeddedplanet.com>
22448 Date: Mon Apr 23 14:00:11 2007 +0200
22450 [patch] setenv(...) can delete environmentalvariables
22452 update setenv() function so that entering a NULL value for the
22453 variable's value will delete the environmental variable
22455 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
22456 Acked-by: Stefan Roese <sr@denx.de>
22458 commit 36f104e5caa747d568eff26b369565af57c2ffa6
22459 Author: Mike Frysinger <vapier@gentoo.org>
22460 Date: Mon Apr 23 13:54:24 2007 +0200
22462 [patch] use unsigned char in smc91111 driver for mac
22464 the v_mac variable in the smc91111 driver is declared as a signed char ...
22465 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
22466 because when it gets printed out, you get a display like:
22467 0xFFFFFFE0 and that's no good
22469 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22471 commit d98c0885ad617fccf21e7c26ef8cb728fbfb2459
22472 Author: Rodolfo Giometti <giometti@enneenne.com>
22473 Date: Mon Apr 23 13:10:52 2007 +0200
22475 USB: (Another) delay for crappy USB keys.
22477 Some USB keys are slow in giving back an answer when the Root HUB
22478 enables power lines.
22480 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
22482 commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522
22483 Author: Stefan Roese <sr@denx.de>
22484 Date: Mon Apr 23 12:00:22 2007 +0200
22486 Remove BOARDLIBS usage completely
22488 Signed-off-by: Stefan Roese <sr@denx.de>
22490 commit 32556443840f127170e4baa8bdd5b567039f6c36
22491 Author: Michal Simek <monstr@monstr.eu>
22492 Date: Sat Apr 21 21:07:22 2007 +0200
22494 [PATCH] SystemACE support for Microblaze
22496 commit 0643631aa1036cd746bf5d15f5a34bc7bc01ea4f
22497 Author: Michal Simek <monstr@monstr.eu>
22498 Date: Sat Apr 21 21:02:40 2007 +0200
22500 16bit read/write little endian
22502 commit 9d1d6a34d26c5933bc097ce73c9348f95573cdd4
22503 Author: Michal Simek <monstr@monstr.eu>
22504 Date: Sat Apr 21 20:53:31 2007 +0200
22506 Change ML401 parameters - Xilinx BSP
22508 commit 2e343b9a57f32e1bd08c35c9976910333fb4e13d
22509 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
22510 Date: Wed Feb 28 05:37:29 2007 -0600
22512 mpc8641hpcn: Fix LAW and TLB setup to use the IO_PHYS #defines.
22514 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
22516 commit 79cb47391eebef85acadb3f6961ef6c55cace6ac
22517 Author: Zhang Wei <wei.zhang@freescale.com>
22518 Date: Fri Jan 19 10:42:37 2007 +0800
22520 Enable LAWs for MPC8641 PCI-Ex2.
22522 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
22523 Signed-off-by: Jon Loeliger <jdl@freescale.com>
22525 commit bd7851ce1e1f140665b520026abf1042968b1102
22526 Author: Jon Loeliger <jdl@freescale.com>
22527 Date: Fri Apr 20 14:12:26 2007 -0500
22529 mpc86xx; Write MAC address to mac-address and local-mac-address
22531 Some device trees have a mac-address property, some have local-mac-address,
22532 and some have both. To support all of these device trees, ftp_cpu_setup()
22533 should write the MAC address to mac-address and local-mac-address, if they
22536 Signed-off-by: Timur Tabi <timur@freescale.com>
22537 Signed-off-by: Jon Loeliger <jdl@freescale.com>
22539 commit 7dbdf28b8bd855a8530dc3292e4982575a197060
22540 Author: Jon Loeliger <jdl@freescale.com>
22541 Date: Fri Apr 20 14:11:38 2007 -0500
22543 mpc86xx: protect memcpy to bad address if a mac-address is missing from dt
22545 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22546 Signed-off-by: Jon Loeliger <jdl@freescale.com>
22548 commit 14da5f7675bbb427c469e3f45006e027b6e21db9
22549 Author: Wolfgang Denk <wd@denx.de>
22550 Date: Fri Apr 20 17:43:28 2007 +0200
22552 Cleanup compiler warnings, update CHANGELOG
22554 Signed-off-by: Wolfgang Denk <wd@denx.de>
22556 commit 6923565db12af34fd5e02d354ee65a8c78ac460f
22557 Author: Detlev Zundel <dzu@denx.de>
22558 Date: Fri Apr 20 12:01:47 2007 +0200
22560 Fix breakage of NC650 board with respect to nand support.
22562 Signed-off-by: Detlev Zundel <dzu@denx.de>
22564 commit 39f23cd90947639ac278a18ff277ec786b5ac167
22565 Author: Domen Puncer <domen.puncer@telargo.com>
22566 Date: Fri Apr 20 11:13:16 2007 +0200
22568 [RFC PATCH] icecube/lite5200b: fix OF_TBCLK (timebase-frequency) calculation
22570 G2 core reference manual says decrementer and time base
22571 are decreasing/increasing once every 4 bus clock cycles.
22572 Lets fix it, so time in Linux won't run twice as fast
22574 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
22575 Acked-by: Grant Likely <grant.likely@secretlab.ca>
22577 commit 7651f8bdbba03bb0b4f241e2d2c4cb65b230bd56
22578 Author: Gerald Van Baren <vanbaren@cideas.com>
22579 Date: Thu Apr 19 23:14:39 2007 -0400
22581 Fix serious pointer bug with bootm and reserve map.
22583 What was suppose to be a stack variable was declared as a pointer,
22584 overwriting random memory.
22585 Also moved the libfdt.a requirement into the main Makefile. That is
22588 commit d21686263574e95cb3e9e9b0496f968b1b897fdb
22589 Author: Stefan Roese <sr@denx.de>
22590 Date: Thu Apr 19 09:53:52 2007 +0200
22592 ppc4xx: Fix chip select timing for SysACE access on AMCC Katmai
22594 Previous versions used full wait states for the chip select #1 which
22595 is connected to the Xilinix SystemACE controller on the AMCC Katmai
22596 evaluation board. This leads to really slow access and therefore low
22597 performance. This patch now sets up the chip select a lot faster
22598 resulting in much better read/write performance of the Linux driver.
22600 Signed-off-by: Stefan Roese <sr@denx.de>
22602 commit 37837828d89084879bee2f2b8c7c68d4695940df
22603 Author: Wolfgang Denk <wd@denx.de>
22604 Date: Wed Apr 18 17:49:29 2007 +0200
22606 Clenaup, update CHANGELOG
22608 Signed-off-by: Wolfgang Denk <wd@denx.de>
22610 commit fd094c6379e2ef8a4d0ceb5640b24cb0c8d04449
22611 Author: Wolfgang Denk <wd@denx.de>
22612 Date: Wed Apr 18 17:20:58 2007 +0200
22616 Signed-off-by: Wolfgang Denk <wd@denx.de>
22618 commit 2a26ec4732efd7a308d0bbc97714c1d75ef1173b
22619 Author: Wolfgang Denk <wd@denx.de>
22620 Date: Wed Apr 18 17:07:26 2007 +0200
22622 Cleanup, update CHANGELOG
22624 Sigend-off-by: Wolfgang Denk <wd@denx.de>
22626 commit 5f6c732affea9647762d27a4617a2ae64c52dceb
22627 Author: Wolfgang Denk <wd@denx.de>
22628 Date: Wed Apr 18 16:17:46 2007 +0200
22632 commit ad4eb555671d97f96dc56eab55103b1f86874b01
22633 Author: Wolfgang Denk <wd@denx.de>
22634 Date: Wed Apr 18 14:30:39 2007 +0200
22636 MCC200 board: remove warning which is obsolete after PSoC firmware changes
22638 Signed-off-by: Wolfgang Denk <wd@denx.de>
22640 commit 3747a3f010b2b1442dec3e871c69788b6017aaae
22641 Author: Domen Puncer <domen.puncer@telargo.com>
22642 Date: Wed Apr 18 12:11:05 2007 +0200
22644 [PATCH] icecube/lite5200b: document wakeup from low-power support
22646 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
22648 commit e673226ff9d6aa91b47ceac74b8c13770b06bb37
22649 Author: Stefan Roese <sr@denx.de>
22650 Date: Wed Apr 18 12:07:47 2007 +0200
22652 ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM
22654 Signed-off-by: Stefan Roese <sr@denx.de>
22656 commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f
22657 Author: Stefan Roese <sr@denx.de>
22658 Date: Wed Apr 18 12:05:59 2007 +0200
22660 ppc4xx: Add output for bootrom location to 405EZ ports
22662 Now 405EZ ports also show upon bootup from which boot device
22663 they are configured to boot:
22665 U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05)
22667 CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz)
22668 Bootstrap Option E - Boot ROM Location EBC (32 bits)
22669 16 kB I-Cache 16 kB D-Cache
22670 Board: Acadia - AMCC PPC405EZ Evaluation Board
22672 Signed-off-by: Stefan Roese <sr@denx.de>
22674 commit 9c00dfb0bf89c8c23e8af5b5bdf49cf66d769f85
22675 Author: Peter Pearse <peter.pearse@arm.com>
22676 Date: Tue Apr 17 13:30:33 2007 +0100
22678 Move ppearse to ARM board list
22679 Add Konstantin Kletschke for scb9328.
22680 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
22682 commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3
22683 Author: Domen Puncer <domen.puncer@telargo.com>
22684 Date: Mon Apr 16 14:00:13 2007 +0200
22686 [PATCH] icecube/lite5200b: wakeup from low-power support
22688 U-Boot part of Lite5200b low power mode support.
22689 Puts SDRAM out of self-refresh and transfers control to
22690 address saved at physical 0x0.
22692 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
22693 Acked-by: Grant Likely <grant.likely@secretlab.ca>
22695 commit f35a53fc7b0c79fcfe7bdc01163c4b34aaba1460
22696 Author: Gerald Van Baren <vanbaren@cideas.com>
22697 Date: Sun Apr 15 13:54:26 2007 -0400
22699 Fix the ft_cpu_setup() property settings.
22701 Use "setter" functions instead of flags, cleaner and more flexible.
22702 It also fixes the problem noted by Timur Tabi that the ethernet MAC
22703 addresses were all being set incorrectly to the same MAC address.
22705 commit c28abb9c614f65ce2096cc4a66fc886c77d0e5a4
22706 Author: Gerald Van Baren <vanbaren@cideas.com>
22707 Date: Sat Apr 14 22:51:24 2007 -0400
22709 Improve the bootm command for CONFIG_OF_LIBFDT
22711 In bootm, create the "/chosen" node only if it doesn't already exist
22712 (better matches the previous behavior).
22713 Update for proper reserved memory map handling for initrd.
22715 commit 3f9f08cf91c8a6949a5d78a18bd3d8df7b86d888
22716 Author: Gerald Van Baren <vanbaren@cideas.com>
22717 Date: Sat Apr 14 22:46:41 2007 -0400
22719 Add some utilities to manipulate the reserved memory map.
22721 commit 8048cdd56f04a756eeea4951f402bf5cc33785db
22722 Author: Wolfgang Denk <wd@denx.de>
22723 Date: Sat Apr 14 21:16:54 2007 +0200
22727 commit 8e6875183cdca91c134408d119d4abcd48ef6856
22728 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
22729 Date: Sun Dec 17 18:56:46 2006 +0100
22731 AVR32: Enable MMC support
22733 Set up the portmux for the MMC interface and enable the MMC driver
22734 along with support for DOS partitions, ext2 and FAT filesystems.
22736 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
22738 commit fc26c97bb6df41b4a95662c34054fe912387bf38
22739 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
22740 Date: Fri Jan 20 10:03:53 2006 +0100
22744 Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs.
22746 The AT91 ARM-based CPUs use basically the same hardware, so it should
22747 be possible to share this driver, but no effort has been made so far.
22749 Hardware documentation can be found in the AT32AP7000 data sheet,
22750 which can be downloaded from
22752 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
22754 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
22756 commit 05fdab1ef6a10d049a50021a86f1226f444d9b9f
22757 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
22758 Date: Sun Dec 17 18:55:37 2006 +0100
22760 AVR32: Add clk and gpio infrastructure for mmci
22762 Implement functions for configuring the mmci pins, as well as
22763 functions for getting the clock rate of the mmci controller.
22765 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
22767 commit 7fac3f69e9f05c5e5326681976c35d129324c4de
22768 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
22769 Date: Sun Dec 17 18:53:56 2006 +0100
22771 Enable partition support with MMC
22773 Include implementations of init_part() and get_partition_info() when
22776 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
22778 commit 9a24f477a1ed5bb0f74377c985d754ebbfa44872
22779 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
22780 Date: Sun Dec 17 17:14:30 2006 +0100
22782 AVR32: Enable networking
22784 Implement MACB initialization for AVR32 and ATSTK1000, and turn
22785 everything on, including the MACB driver.
22787 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
22789 commit 5c1fe1ffffd1750a7e47e5a2e2cd600c00e4f009
22790 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
22791 Date: Fri Jan 20 10:03:34 2006 +0100
22793 Atmel MACB ethernet driver
22795 Driver for the Atmel MACB on-chip ethernet controller.
22797 This driver has been tested on the ATSTK1000 board with a AT32AP7000
22798 CPU. It should probably work on AT91SAM926x as well with some minor
22801 Hardware documentation can be found in the AT32AP7000 data sheet,
22802 which can be downloaded from
22804 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
22806 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
22808 commit b4ec9c2d43d894729bb633bfdbdfa95a962c1556
22809 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
22810 Date: Sun Dec 17 16:56:14 2006 +0100
22812 AVR32: Add clk and gpio infrastructure for macb0 and macb1
22814 Implement functions for configuring the macb0 and macb1 pins, as
22815 well as functions for getting the clock rate of the various
22816 busses the macb ethernet controllers are connected to.
22818 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
22820 commit d5acb95b16a0a74c643524342c3437e765426d05
22821 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
22822 Date: Sun Dec 17 15:39:15 2006 +0100
22824 AVR32: Implement simple DMA memory allocator
22826 Implement dma_alloc_coherent() which returns cache-aligned
22827 uncacheable memory.
22829 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
22831 commit 91975b0fea773c9e681fea8cf3349669f27685ee
22832 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
22833 Date: Sun Dec 17 15:46:02 2006 +0100
22835 Import <linux/mii.h> from the Linux kernel
22837 Instead of creating yet another set of MII register definitions
22838 in the macb driver, here's a complete set of definitions for everyone
22841 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
22843 commit 1b804b229556a4d862da93c0ec94e79419364b2c
22844 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
22845 Date: Wed Mar 21 19:47:36 2007 +0100
22847 AVR32: Include more commands for ATSTK1000
22849 Include the imi, imls and jffs commands sets by default on ATSTK1000.
22850 Also define CONFIG_BOOTARGS to something more useful, define
22851 CONFIG_BOOTCOMMAND and enable autoboot by default.
22853 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
22855 commit 9c0deb5ae3ea0189f2e08ac29ef1316f1fb8548d
22856 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
22857 Date: Wed Mar 21 19:44:48 2007 +0100
22859 AVR32: Provide a definition of struct stat
22861 Copy the definition of struct stat from the Linux kernel.
22863 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
22865 commit 12f099c08167a7a51aeee623bc16dafd0841271c
22866 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
22867 Date: Sun Dec 17 14:46:06 2006 +0100
22869 AVR32: Use initdram() instead of board_init_memories()
22871 Conform to the "standard" interface and use initdram() instead of
22872 board_init_memories() on AVR32. This enables us to get rid of the
22873 sdram_size member of the global_data struct as well.
22875 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
22877 commit 1f4f2121c2685182eb87fa9a9b799d1917387a1c
22878 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
22879 Date: Mon Nov 20 15:53:10 2006 +0100
22881 AVR32: Relocate u-boot to SDRAM
22883 Relocate the u-boot image into SDRAM like everyone else does. This
22884 means that we can handle much larger .data and .bss than we used to.
22886 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
22888 commit df548d3c3e2bbc40258713167859ffc2ce99a900
22889 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
22890 Date: Sun Nov 19 18:06:53 2006 +0100
22892 AVR32: Resource management rewrite
22894 Rewrite the resource management code (i.e. I/O memory, clock gating,
22895 gpio) so it doesn't depend on any global state. This is necessary
22896 because this code is heavily used before relocation to RAM, so we
22897 can't write to any global variables.
22899 As an added bonus, this makes u-boot's memory footprint a bit smaller,
22900 although some functionality has been left out; all clocks are enabled
22901 all the time, and there's no checking for gpio line conflicts.
22903 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
22905 commit 03d1e1365796cd15d1726e8a51fd8b5be50b2fe9
22906 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
22907 Date: Sat Nov 18 18:01:13 2006 +0100
22909 AVR32: Clean up memory-map.h for at32ap7000
22911 Convert spaces to tabs (must have missed this one last time around),
22912 sort the entries by address and group them together by bus
22915 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
22917 commit 28c699ef69f4b6cdf252e4747b7b590028a88981
22918 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
22919 Date: Sat Nov 18 17:32:31 2006 +0100
22921 AVR32: Build position-independent u-boot
22923 Add -fPIC -mno-init-got to the avr32-specific CFLAGS to make u-boot
22924 position independent. This will make relocation a lot easier.
22926 -mno-init-got means that gcc shouldn't emit code to load the GOT
22927 address into r6 in every function prologue. We do it once and for
22928 all in the early startup assembly code, so enabling this option
22929 makes u-boot a bit faster and smaller.
22931 The assembly parts have always been position-independent, so no code
22932 changes should be necessary.
22934 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
22936 commit 5374b36de91d006d1df9536259fa9f66b01aa3aa
22937 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
22938 Date: Sat Nov 18 17:24:31 2006 +0100
22940 AVR32: Use avr32-linux- cross-compilation prefix by default
22942 It doesn't really matter which toolchain you use to compile u-boot,
22943 but the avr32-linux one is probably what most people have installed.
22945 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
22947 commit c841beeddebece0039e724fb27f4d1a39ee1c6b6
22948 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
22949 Date: Sat Nov 18 17:15:30 2006 +0100
22951 AVR32: Split start_u_boot into board_init_f and board_init_r
22953 Split the avr32 initialization code into a function to run before
22954 relocation, board_init_f and a function to run after relocation,
22955 board_init_r. For now, board_init_f simply calls board_init_r
22958 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
22960 commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e
22961 Author: Heiko Schocher <hs@pollux.denx.de>
22962 Date: Sat Apr 14 05:26:48 2007 +0200
22964 [Fix] Set the LED status register on the UC101 for the LXT971 PHY.
22965 clear the Display after reset.
22967 Signed-off-by: Heiko Schocher <hs@denx.de>
22969 commit 7882751c78b7ecabfd49b0eff8de27661c71f16c
22970 Author: Denis Peter <d.peter@mpl.ch>
22971 Date: Fri Apr 13 09:13:33 2007 +0200
22973 [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c
22975 Fix bug introduced by "Fix get_partition_info() parameter error in all
22976 other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented
22977 to use diskboot or scsiboot form another device than 0.
22979 Signed-off-by: Denis Peter <d.peter@mpl.ch>
22981 commit 0b94504d22e70f537c17a0d38c87edb6e370977d
22982 Author: Greg Lopp <lopp@pobox.com>
22983 Date: Fri Apr 13 08:02:24 2007 +0200
22985 [PATCH] Fix use of "void *" for block dev read/write buffer pointers
22987 Signed-of-by: Greg Lopp <lopp@pobox.com>
22988 Acked-by: Grant Likely <grant.likely@secretlab.ca>
22990 commit 6fbf261f8df294e589cfadebebe5468e3c0f29e9
22991 Author: Xie Xiaobo <r63061@freescale.com>
22992 Date: Fri Mar 9 19:08:25 2007 +0800
22994 Fix two bugs for MPC83xx DDR2 controller SPD Init
22996 There are a few bugs in the cpu/mpc83xx/spd_sdram.c
22997 the first bug is that the picos_to_clk routine introduces a huge
22998 rounding error in 83xx.
22999 the second bug is that the mode register write recovery field is
23000 tWR-1, not tWR >> 1.
23002 commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13
23003 Author: Jeffrey Mann <mannj@embeddedplanet.com>
23004 Date: Thu Apr 12 14:15:59 2007 +0200
23006 ppc4xx: Fix i2c divisor calcularion for PPC4xx
23008 This patch fixes changes the i2c_init(...) function to use the function
23009 get_OPB_freq() rather than calculating the OPB speed by
23010 sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is
23011 specific per processor. The prior method was not and so was calculating
23012 the wrong speed for some PPC4xx processors.
23014 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
23015 Signed-off-by: Stefan Roese <sr@denx.de>
23017 commit 6c9ba919375db977aaad9146bf320c7afd07ae7a
23018 Author: Wolfgang Denk <wd@denx.de>
23019 Date: Wed Apr 11 17:25:01 2007 +0200
23023 Signed-off-by: Wolfgang Denk <wd@denx.de>
23025 commit 51056dd9863e6a1bc363afbbe1775c58cd967418
23026 Author: Wolfgang Denk <wd@denx.de>
23027 Date: Wed Apr 11 17:22:55 2007 +0200
23029 Update for SC3 board
23031 * Make IDE timeout configurable through ide_reset_timeout variable.
23032 * Use Newline as "password" string
23033 * Use just a single partition in NAND flash
23035 commit 3d98b85800c80dc68227c8f10bf5c93456d6d054
23036 Author: Haiying Wang <haiying.wang@freescale.com>
23037 Date: Mon Jan 22 12:37:30 2007 -0600
23039 Add PIXIS FPGA support for MPC8641HPCN board.
23041 Move the 8641HPCN's PIXIS code to the new directory
23042 board/freescale/common/ as it will be shared by
23043 future boards not in the same processor family.
23045 Write a "pixis_reset" command that utilizes the FPGA
23046 reset sequencer to support alternate soft-reset options
23047 such as using the "alternate" flash bank, enabling
23048 the watch dog, or choosing different CPU frequencies.
23050 Add documentation for the pixis_reset to README.mpc8641hpcn.
23052 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
23053 Signed-off-by: Jon Loeliger <jdl@freescale.com>
23055 commit 64dbbd40c58349b64f43fd33dbb5ca0adb67d642
23056 Author: Gerald Van Baren <vanbaren@cideas.com>
23057 Date: Fri Apr 6 14:19:43 2007 -0400
23059 Moved fdt command support code to fdt_support.c
23061 ...in preparation for improving the bootm command's handling of fdt blobs.
23062 Also cleaned up some coding sloppiness.
23064 commit 6679f9299534e488a171a9bb8f9bb891de247aab
23065 Author: Gerald Van Baren <vanbaren@cideas.com>
23066 Date: Fri Apr 6 14:17:14 2007 -0400
23068 libfdt: Make fdt_check_header() public
23070 Changed _fdt_check_header() to fdt_check_header() and made it part of
23071 the interface - it is a useful routine.
23073 Also did some asthetics cleanup to the include files (headers).
23075 commit c0707ce65677650b5ceab0500ee50ae5168afef2
23076 Author: Aubrey Li <aubrey.adi@gmail.com>
23077 Date: Thu Apr 5 18:34:06 2007 +0800
23079 [Blackfin][PATCH] Kill off a bunch of common local prototypes
23081 commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d
23082 Author: Aubrey Li <aubrey.adi@gmail.com>
23083 Date: Thu Apr 5 18:33:04 2007 +0800
23085 [Blackfin][PATCH] Fix dynamic CPLB generation issue
23087 commit 0445e3a264251d75b1be45ef713c70726a2952f0
23088 Author: Aubrey Li <aubrey.adi@gmail.com>
23089 Date: Thu Apr 5 18:31:47 2007 +0800
23091 [Blackfin][PATCH] minior cleanup
23093 commit 155fd766573981090e638b493d5857562151862e
23094 Author: Aubrey Li <aubrey.adi@gmail.com>
23095 Date: Thu Apr 5 18:31:18 2007 +0800
23097 [Blackfin][PATCH] Fix copyright and update license
23099 commit 9fd437bbd75d282f899e1da50be20a2bf38450bc
23100 Author: Aubrey Li <aubrey.adi@gmail.com>
23101 Date: Thu Apr 5 18:30:25 2007 +0800
23103 [Blackfin][PATCH] Add BF537 EMAC driver initialization
23105 commit 889256e8604e0c68db1d866d720894dffede9df6
23106 Author: Aubrey Li <aubrey.adi@gmail.com>
23107 Date: Thu Apr 5 18:29:55 2007 +0800
23109 [Blackfin][PATCH] call real the system synchronize instruction
23111 commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05
23112 Author: Aubrey Li <aubrey.adi@gmail.com>
23113 Date: Thu Apr 5 18:29:17 2007 +0800
23115 [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it
23117 commit dfeeab2cd680df047e68e723b246adf6f33bb556
23118 Author: Aubrey Li <aubrey.adi@gmail.com>
23119 Date: Thu Apr 5 18:28:34 2007 +0800
23121 [Blackfin][PATCH]: fix flash unaligned copy issue
23123 commit 443feb740584e406efa203af909fe2926608e8d5
23124 Author: Igor Marnat <marny@rambler.ru>
23125 Date: Wed Mar 21 09:55:01 2007 +0300
23127 Update usage of 'nc' in README.NetConsole
23129 Added information about usage of NetConsole on systems where the -l and -p
23130 switches are mutually exclusive.
23132 Signed-off-by: Igor Marnat <marny@rambler.ru>
23133 Signed-off-by: Ben Warren <bwarren@qstreams.com>
23135 commit 31c98a88228021b314c89ebb8104fb6473da4471
23136 Author: Wolfgang Denk <wd@denx.de>
23137 Date: Wed Apr 4 02:09:30 2007 +0200
23139 Minor coding style cleanup.
23141 commit 94abd7c0583ebe01e799b25f451201deeaab550d
23142 Author: Wolfgang Denk <wd@denx.de>
23143 Date: Wed Apr 4 01:49:15 2007 +0200
23147 commit 822af351ad2babc7d99033361a5fcacd30f6bc78
23148 Author: Rodolfo Giometti <giometti@enneenne.com>
23149 Date: Tue Apr 3 14:27:18 2007 +0200
23151 Support for the Philips ISP116x HCD (Host Controller Driver)
23153 Signed-off-by: Rodolfo Giometti <giometti@enneenne.com>
23155 commit edf5851be6c17c031d4f71dd5b0a12040b7c50c8
23156 Author: Markus Klotzbuecher <mk@denx.de>
23157 Date: Tue Apr 3 14:27:08 2007 +0200
23159 USB: cleanup monahans usb support. Remove dead code.
23161 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
23163 commit a65c5768e5537530bd1780af3d3fddc3113a163c
23164 Author: Stefan Roese <sr@denx.de>
23165 Date: Mon Apr 2 10:09:30 2007 +0200
23167 ppc4xx: Change SysACE address on Katmai
23169 With this new base address of the Xilinx SystemACE controller
23170 the Linux driver will be easier to adapt, since it can now be
23171 mapped via the "normal" ioremap() call.
23173 Signed-off-by: Stefan Roese <sr@denx.de>
23175 commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73
23176 Author: Gerald Van Baren <vanbaren@cideas.com>
23177 Date: Sat Mar 31 14:30:53 2007 -0400
23179 Fix some minor whitespace violations.
23181 commit 213bf8c822de8eecaf69860684469cdaba2e9e6a
23182 Author: Gerald Van Baren <vanbaren@cideas.com>
23183 Date: Sat Mar 31 12:23:51 2007 -0400
23185 Add a flattened device tree (fdt) command (2 of 2)
23187 Modifications to the existing code to support the new fdt command.
23189 commit 781e09ee6e3e3e392ab362c1f0ef1068adc76e3e
23190 Author: Gerald Van Baren <vanbaren@cideas.com>
23191 Date: Sat Mar 31 12:22:10 2007 -0400
23193 Add a flattened device tree (fdt) command (1 of 2)
23195 The fdt command uses David Gibson's libfdt library to manipulate as well
23196 as print the flattened device tree. This patch is the new command,
23197 the second part is the modifications to the existing code.
23199 commit 3af0d587d93e0be5f96e1b30fa41e662f8b0803e
23200 Author: Gerald Van Baren <vanbaren@cideas.com>
23201 Date: Sat Mar 31 12:13:43 2007 -0400
23203 libfdt: Enhanced and published fdt_next_tag()
23205 Enhanced the formerly private function _fdt_next_tag() to allow stepping
23206 through the tree, used to produce a human-readable dump, and made
23207 it part of the published interface.
23208 Also added some comments.
23210 commit fa3a74cec73dfd06a5ae35a9a3368200273aaa71
23211 Author: Gerald Van Baren <vanbaren@cideas.com>
23212 Date: Sat Mar 31 12:05:39 2007 -0400
23214 libfdt: Customizations for use by u-boot.
23216 Changes to David Gibson's original source to fit into u-boot's
23217 environment. No functionality changes.
23219 commit 35748177c64a4a83a00057e93bb33e40278a2a96
23220 Author: Gerald Van Baren <vanbaren@cideas.com>
23221 Date: Sat Mar 31 12:00:56 2007 -0400
23223 libfdt: Import libfdt source (2 of 2)
23225 This adds the applicable libfdt source files (unmodified) and a README
23226 to explain where the source came from.
23228 commit 7cd5da0fe877e7171a4cdd44880bce783132871a
23229 Author: Gerald Van Baren <vanbaren@cideas.com>
23230 Date: Sat Mar 31 11:59:59 2007 -0400
23232 libfdt: Import libfdt source (1 of 2)
23234 This adds the applicable libfdt source files (unmodified) and a README
23235 to explain where the source came from.
23237 commit da6ebc1bc082cbe3b6bbde079cafe09f7ebbad4b
23238 Author: Stefan Roese <sr@denx.de>
23239 Date: Sat Mar 31 13:16:23 2007 +0200
23241 ppc4xx: Update Katmai bootstrap command
23243 Now the DDR2 frequency is also 2*PLB frequency when 166MHz PLB
23246 Signed-off-by: Stefan Roese <sr@denx.de>
23248 commit cabee756a6532986729477c3cc1ea16ef8517ad2
23249 Author: Stefan Roese <sr@denx.de>
23250 Date: Sat Mar 31 13:15:06 2007 +0200
23252 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
23254 Additional RAM information is now printed upon powerup, like
23255 DDR2 frequency and CAS latency.
23257 Signed-off-by: Stefan Roese <sr@denx.de>
23259 commit 60723803431ac75cad085690789e433d5ab9174e
23260 Author: Stefan Roese <sr@denx.de>
23261 Date: Sat Mar 31 08:48:36 2007 +0200
23263 ppc4xx: Change Yucca config file to support ECC
23265 With the updated 44x DDR2 driver the Yucca board now supports
23266 ECC generation and checking.
23268 Signed-off-by: Stefan Roese <sr@denx.de>
23270 commit 490e5730c674b20d708b783a2c5ffd7208f83873
23271 Author: Stefan Roese <sr@denx.de>
23272 Date: Sat Mar 31 08:47:34 2007 +0200
23274 ppc4xx: Fix "bootstrap" command for Katmai board
23276 The board specific "bootstrap" command is now fixed and can
23277 be used for the AMCC Katmai board to configure different
23278 CPU/PLB/OPB frequencies.
23280 Signed-off-by: Stefan Roese <sr@denx.de>
23282 commit 94f54703c3a776ec23e427ca2a16e0a79a5d50c1
23283 Author: Stefan Roese <sr@denx.de>
23284 Date: Sat Mar 31 08:46:08 2007 +0200
23286 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
23288 Fix a bug in the auto calibration routine. This driver now runs
23289 more reliable with the tested modules. It's also tested with
23290 167MHz PLB frequency (667MHz DDR2 frequency) on the Katmai.
23292 Signed-off-by: Stefan Roese <sr@denx.de>
23294 commit 342cd097be1e7affe82f42ab3da220959a699e64
23295 Author: Michal Simek <monstr@monstr.eu>
23296 Date: Fri Mar 30 22:52:09 2007 +0200
23298 [PATCH] Clean include dependence
23300 commit 6f934210fb293fde2cfb4251c6d96fdc58b6a906
23301 Author: Michal Simek <monstr@monstr.eu>
23302 Date: Fri Mar 30 22:42:45 2007 +0200
23304 [CLEAN] Remove inefficient Suzaku code
23306 commit 430f1b0f9a670c2f13eaa52e66a10db96dd3647d
23307 Author: Stefan Roese <sr@denx.de>
23308 Date: Wed Mar 28 15:03:16 2007 +0200
23310 Merge some AMCC make targets to keep the top-level Makefile smaller
23312 Signed-off-by: Stefan Roese <sr@denx.de>
23314 commit 0c75c9d84307a9f1cbe1ff0c4d8937ee3a96475e
23315 Author: Stefan Roese <sr@denx.de>
23316 Date: Wed Mar 28 14:52:12 2007 +0200
23318 i2c: Enable "old" i2c commands even when CONFIG_I2C_CMD_TREE is defined
23320 The "old" i2c commands (iprobe, imd...) are now compiled in again,
23321 even when the i2c command tree is enabled via the CONFIG_I2C_CMD_TREE
23324 Signed-off-by: Stefan Roese <sr@denx.de>
23326 commit 5da048adf44bea5e3b94080d02903c2e3fe7aa4a
23327 Author: Michal Simek <monstr@monstr.eu>
23328 Date: Tue Mar 27 00:32:16 2007 +0200
23330 PATCH: Resolve GPL license problem
23332 commit ae00bb4b2944dc64a485ed72a19754b11af7c223
23333 Author: Rodolfo Giometti <giometti@enneenne.com>
23334 Date: Mon Mar 26 12:03:36 2007 +0200
23336 PXA: pxa27x USB OHCI support
23338 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
23340 commit ae79f60677c208326535647dcbd5c3ec40dbcb0b
23341 Author: Markus Klotzbuecher <mk@denx.de>
23342 Date: Mon Mar 26 11:21:05 2007 +0200
23344 USB: remove the S3C24X0_merge #define, which was introduced while
23345 merging OHCI drivers.
23347 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
23349 commit 1798049522f594013aea29457d46794298c6ae15
23350 Author: Michal Simek <root@monstr.eu>
23351 Date: Mon Mar 26 01:39:07 2007 +0200
23353 Support for XUPV2P board
23355 BSP autoconfig support
23357 commit 0d974d5297349504a2ddfa09314be573b5df320a
23358 Author: Stefan Roese <sr@denx.de>
23359 Date: Sat Mar 24 15:57:09 2007 +0100
23361 [PATCH] Add 4xx GPIO functions
23363 This patch adds some 4xx GPIO functions. It also moves some of the
23364 common code and defines into a common 4xx GPIO header file.
23366 Signed-off-by: Stefan Roese <sr@denx.de>
23368 commit 2db633658bbf366ab0c8dad7a0727e1fb2ae6b11
23369 Author: Stefan Roese <sr@denx.de>
23370 Date: Sat Mar 24 15:55:58 2007 +0100
23372 [PATCH] Small Sequoia cleanup
23374 Signed-off-by: Stefan Roese <sr@denx.de>
23376 commit 3cb86f3e40d2a80356177434a99f75bc8baa9caf
23377 Author: Stefan Roese <sr@denx.de>
23378 Date: Sat Mar 24 15:45:34 2007 +0100
23380 [PATCH] Clean up 40EZ/Acadia support
23382 This patch cleans up all the open issue of the preliminary
23385 Signed-off-by: Stefan Roese <sr@denx.de>
23387 commit 6eb1df835191d8ce4b81d5af40fa8e0fbe78e997
23388 Author: Jon Loeliger <jdl@freescale.com>
23389 Date: Tue Dec 12 11:02:20 2006 -0600
23391 Fix 8641HPCN problem with ld version 2.16
23393 (Dot outside sections problem).
23395 This fix is in the spirit of 807d5d7319330e336ab34a5623c5e0d73b87d540.
23397 Signed-off-by: Jon Loeliger <jdl@freescale.com>
23399 commit 9964a4dd0d4ef5a037febaebf1aa494b1a72991c
23400 Author: Haiying Wang <haiying.wang@freescale.com>
23401 Date: Thu Dec 7 10:35:55 2006 -0600
23403 Set Rev 2.x 86xx PIC in mixed mode.
23405 Prevent false interrupt from hanging Linux as MSR[EE] is set
23406 to enable interrupts by changing the PIC out of the default
23407 pass through mode into mixed mode.
23409 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
23410 Signed-off-by: Jon Loeliger <jdl@freescale.com>
23412 commit 5a58a73ceb0a4059c42ef64cedbc1a45e0aaa00e
23413 Author: Jason Jin <jason.jin@freescale.com>
23414 Date: Thu Dec 7 10:32:35 2006 -0600
23416 Add flash cmd function to 8641HPCN ramboot
23418 Also fixes some commmand for 8641 HPCN ramboot case.
23420 Signed-off-by: Jason Jin <jason.jin@freescale.com>
23421 Signed-off-by: Jon Loeliger <jdl@freescale.com>
23423 commit 2ccceacc04b009d923afb7c26189ba2f8a2a5d46
23424 Author: Ed Swarthout <ed.swarthout@freescale.com>
23425 Date: Thu Dec 7 10:34:14 2006 -0600
23427 Add support for 8641 Rev 2 silicon.
23429 Without this patch, I am unable to get to the prompt on rev 2 silicon.
23430 Only set ddrioovcr for rev1.
23432 Signed-off-by: Ed Swarthout<ed.swarthout@freescale.com>
23433 Signed-off-by: Jon Loeliger <jdl@freescale.com>
23435 commit 44ba464b99001f8bd1c456a1e9d59726252f707a
23436 Author: Wolfgang Denk <wd@denx.de>
23437 Date: Thu Mar 22 00:13:12 2007 +0100
23439 Code cleanup / re-insert previous Copyright entries.
23441 Signed-off-by: Wolfgang Denk <wd@denx.de>
23443 commit 2a8dfe08359a1b663418b2faa1da1d7bce34d302
23444 Author: Wolfgang Denk <wd@denx.de>
23445 Date: Wed Mar 21 23:26:15 2007 +0100
23447 Code cleanup. Update CHANGELOG
23449 commit e6615ecf4eaf4dd52696934aed8f5c6474cfd286
23450 Author: Stefan Roese <sr@denx.de>
23451 Date: Wed Mar 21 14:54:29 2007 +0100
23453 ppc4xx: Fix file mode of include/configs/acadia.h
23455 Signed-off-by: Stefan Roese <sr@denx.de>
23457 commit d5f4614c9350d9333e575100fb250aab774d0258
23458 Author: Markus Klotzbuecher <mk@denx.de>
23459 Date: Wed Mar 21 14:41:46 2007 +0100
23461 SPC1920: fix small clock routing bug
23463 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
23465 commit 16c0cc1c82081a493ab87c51980b28336ce1bce8
23466 Author: Stefan Roese <sr@denx.de>
23467 Date: Wed Mar 21 13:39:57 2007 +0100
23469 [PATCH] Add AMCC Acadia (405EZ) eval board support
23471 This patch adds support for the new AMCC Acadia eval board.
23473 Please note that this Acadia/405EZ support is still in a beta stage.
23474 Still lot's of cleanup needed but we need a preliminary release now.
23476 Signed-off-by: Stefan Roese <sr@denx.de>
23478 commit e01bd218b00af73499331a1a701625a852cd286f
23479 Author: Stefan Roese <sr@denx.de>
23480 Date: Wed Mar 21 13:38:59 2007 +0100
23482 [PATCH] Add AMCC PPC405EZ support
23484 This patch adds support for the new AMCC 405EZ PPC. It is in
23485 preparation for the AMCC Acadia board support.
23487 Please note that this Acadia/405EZ support is still in a beta stage.
23488 Still lot's of cleanup needed but we need a preliminary release now.
23490 Signed-off-by: Stefan Roese <sr@denx.de>
23492 commit 07e82cb2e284a893df6693f2a1337ab2c47bf6a1
23493 Author: Heiko Schocher <hs@pollux.denx.de>
23494 Date: Wed Mar 21 08:45:17 2007 +0100
23496 [PATCH] TQM8272: dont change the bits given from the HRCW
23497 for the SIUMCR and BCR Register.
23498 Fix the calculation for the EEprom Size
23500 Signed-off-by: Heiko Schocher <hs@denx.de>
23502 commit 654589873dbafcf104dff133ce0d03a4506e9cc3
23503 Author: Aubrey Li <aubrey.adi@gmail.com>
23504 Date: Tue Mar 20 18:16:24 2007 +0800
23506 [Blackfin][PATCH] Add BF561 EZKIT board support
23508 commit a6154fd1cfd020f6da8527e0365b1020a11a71d0
23509 Author: Aubrey Li <aubrey.adi@gmail.com>
23510 Date: Mon Mar 19 22:55:58 2007 +0800
23512 [Blackfin][PATCH] minor cleanup
23514 commit 389b6bb50f745bf5038ce030300d8a8512e96f79
23515 Author: Wolfgang Denk <wd@denx.de>
23516 Date: Mon Mar 19 13:10:08 2007 +0100
23518 Remove obsoleted POST files.
23520 Signed-off-by: Wolfgang Denk <wd@denx.de>
23522 commit 8e709bbb2636b5670a8f2b575e138eb1f55773f6
23523 Author: Aubrey Li <aubrey.adi@gmail.com>
23524 Date: Mon Mar 19 01:26:11 2007 +0800
23526 [PATCH] Add flash chip M29W320ET/B support
23528 commit 26bf7deca364a5b33f39e8f14ddd3f4081345015
23529 Author: Aubrey Li <aubrey.adi@gmail.com>
23530 Date: Mon Mar 19 01:24:52 2007 +0800
23532 [Blackfin][PATCH] Add BF537 stamp board support
23534 commit 8423e5e31a7235d05a482627315fb11d49c17bd7
23535 Author: Stefan Roese <sr@denx.de>
23536 Date: Fri Mar 16 21:11:42 2007 +0100
23538 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board
23540 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
23541 DDR memory are dynamically programmed matching the total size
23542 of the equipped memory (DIMM modules).
23544 Signed-off-by: Stefan Roese <sr@denx.de>
23546 commit 76d1466f918b881cda2d259254761e73885093c2
23547 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
23548 Date: Tue Mar 13 13:38:05 2007 +0100
23550 [PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405
23551 boards in terms of unification.
23553 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
23555 commit a7090b993d3d4d2221ac3f33e6cb1d1b2ccc6bf0
23556 Author: Wolfgang Denk <wd@denx.de>
23557 Date: Tue Mar 13 16:05:55 2007 +0100
23559 Make SC3 board build with 'make O='; use 'addcons' consistently
23560 (SC3 and Jupiter used to use 'addcon' instead).
23562 Signed-off-by: Wolfgang Denk wd@denx.de
23564 commit 8502e30a28e492c756ea2d7df0ace026388fce4b
23565 Author: Heiko Schocher <hs@pollux.denx.de>
23566 Date: Tue Mar 13 09:40:59 2007 +0100
23568 [PATCH] update board config for jupiter Board:
23570 CONFIG_CMDLINE_EDITING,
23571 CFG_ENV_ADDR_REDUND activated
23573 Signed-off-by: Heiko Schocher <hs@denx.de>
23575 commit 0d93de11449390a5984b0236c3612e50f6dbb7e8
23576 Author: Aubrey Li <aubrey.adi@gmail.com>
23577 Date: Mon Mar 12 12:11:55 2007 +0800
23579 [Blackfin][PATCH] minor cleanup
23581 commit bfa5754a58477ac917d21527cd0f079d87cf188e
23582 Author: Aubrey Li <aubrey.adi@gmail.com>
23583 Date: Mon Mar 12 01:42:06 2007 +0800
23585 [Blackfin][PATCH] Fix BUILD_DIR option of MAKEALL building issue
23587 commit 8440bb14581a294375c34b91b42512f9753d1130
23588 Author: Aubrey Li <aubrey.adi@gmail.com>
23589 Date: Mon Mar 12 00:25:14 2007 +0800
23591 [Blackfin][PATCH] code cleanup
23593 commit cfc67116a706fd18b8f6a9c11a16753c5626d689
23594 Author: Michal Simek <monstr@monstr.eu>
23595 Date: Sun Mar 11 13:48:24 2007 +0100
23597 [Microblaze][PATCH] part 2
23599 interrupt controller support
23603 board information support
23605 booting image support
23607 adding support for Xilinx ML401
23609 commit 76316a318de91f6184e7c22a10e02d275ade2441
23610 Author: Michal Simek <monstr@monstr.eu>
23611 Date: Sun Mar 11 13:42:58 2007 +0100
23613 [Microblaze][PATCH]
23615 interrupt controller support
23619 board information support
23621 booting image support
23623 adding support for Xilinx ML401
23625 commit 8db13d63157811c839d15a313d9f2d2f5fd10af3
23626 Author: Aubrey Li <aubrey.adi@gmail.com>
23627 Date: Sat Mar 10 23:49:29 2007 +0800
23629 [Blackfin][PATCH] code cleanup
23631 commit ef26a08fef928b7bc11ae2c109e638dc3a016d91
23632 Author: Aubrey.Li <aubrey.adi@gmail.com>
23633 Date: Fri Mar 9 13:40:56 2007 +0800
23635 [Blackfin][PATCH-2/2] Common files changed to support bf533 platform
23637 commit 3f0606ad0b5639f7f22848fe5b4574e754d0470f
23638 Author: Aubrey.Li <aubrey.adi@gmail.com>
23639 Date: Fri Mar 9 13:38:44 2007 +0800
23641 [Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform support
23643 commit 992423ab43c2bcf6b704853bd00af77450915e20
23644 Author: Stefan Roese <sr@denx.de>
23645 Date: Thu Mar 8 23:00:08 2007 +0100
23647 ppc4xx: Fix file mode of sequoia.c
23649 Signed-off-by: Stefan Roese <sr@denx.de>
23651 commit eb92f613556800f7483666db09d9a237ad911d4a
23652 Author: Wolfgang Denk <wd@pollux.denx.de>
23653 Date: Thu Mar 8 22:52:51 2007 +0100
23657 commit 8ce16f55c7b9752af3d8bed84521aec5337e2de1
23658 Author: John Otken john@softadvances.com <john@softadvances.com>
23659 Date: Thu Mar 8 09:39:48 2007 -0600
23661 ppc4xx: Clear Sequoia/Rainier security engine reset bits
23663 Signed-off-by: John Otken john@softadvances.com <john@softadvances.com>
23665 commit 650a330dd2539130c8c324791e2f9f75aed79d4e
23666 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
23667 Date: Thu Mar 8 16:26:52 2007 +0100
23669 [PATCH] I2C: add some more SPD eeprom decoding for DDR2 modules
23671 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
23673 commit d9fc703246840c4b268debf48c334ba55c597dc0
23674 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
23675 Date: Thu Mar 8 16:25:47 2007 +0100
23677 [PATCH] I2C: disable flat i2c commands when CONFIG_I2C_CMD_TREE is defined
23679 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
23681 commit ced5b9029043397348cdc88e0cfcd6b1f629250b
23682 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
23683 Date: Thu Mar 8 16:23:11 2007 +0100
23685 [PATCH] 4xx: allow CONFIG_I2C_CMD_TREE without CONFIG_I2C_MULTI_BUS
23687 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
23689 commit d8a8ea5c476d37006fc7f85b7f903142795c8b14
23690 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
23691 Date: Thu Mar 8 16:20:32 2007 +0100
23693 [PATCH] I2C: Add missing default CFG_SPD_BUS_NUM
23695 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
23697 commit f9fc6a5852a6335840882fa2111925010eea1abe
23698 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
23699 Date: Wed Mar 7 15:32:01 2007 +0100
23701 fixed ethernet phy configuration for plu405 board
23703 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
23705 commit 769104c9356594deb2092e204a39c05b33202d6c
23706 Author: Wolfgang Denk <wd@pollux.denx.de>
23707 Date: Thu Mar 8 21:49:27 2007 +0100
23711 commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa
23712 Author: Stefan Roese <sr@denx.de>
23713 Date: Thu Mar 8 10:13:16 2007 +0100
23715 [PATCH] Update AMCC Luan 440SP eval board support
23717 The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR
23718 inititializition. This includes DDR auto calibration and support
23719 for different DIMM modules, instead of the fixed setup used in
23720 the earlier version.
23722 This patch also enables the cache in FLASH for the startup
23723 phase of U-Boot (while running from FLASH). After relocating to
23724 SDRAM the cache is disabled again. This will speed up the boot
23725 process, especially the SDRAM setup, since there are some loops
23726 for memory testing (auto calibration).
23728 Signed-off-by: Stefan Roese <sr@denx.de>
23730 commit 2f5df47351910a2936c7741cf111855829200943
23731 Author: Stefan Roese <sr@denx.de>
23732 Date: Thu Mar 8 10:10:18 2007 +0100
23734 [PATCH] Update AMCC Yucca 440SPe eval board support
23736 The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR
23737 inititializition. This includes DDR auto calibration and support
23738 for different DIMM modules, instead of the fixed setup used in
23739 the earlier version.
23741 Signed-off-by: Stefan Roese <sr@denx.de>
23743 commit 2721a68a9ea91f1e494649ce68b2577261f578e2
23744 Author: Stefan Roese <sr@denx.de>
23745 Date: Thu Mar 8 10:07:18 2007 +0100
23747 ppc4xx: Small AMCC Katmai 440SPe update
23749 Signed-off-by: Stefan Roese <sr@denx.de>
23751 commit df294497479b1dca6dd86318b2a912f72fede0df
23752 Author: Stefan Roese <sr@denx.de>
23753 Date: Thu Mar 8 10:06:09 2007 +0100
23755 ppc4xx: Update 440SP/440SPe DDR SPD setup code to support 440SP
23757 Signed-off-by: Stefan Roese <sr@denx.de>
23759 commit 83853178bd36bca6f0f8f1331476620c84a587fc
23760 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
23761 Date: Wed Mar 7 12:14:50 2007 -0600
23763 net - Support ping reply when processing net-loop
23765 Add ICMP_ECHO_REQUEST packet support by responding with a ICMP_ECHO_REPLY.
23767 This permits the ping command to test the phy interface when the phy
23768 is put in loopback mode (typically by setting register 0 bit 14).
23770 It also allows the port to respond to an external ping when u-boot is
23771 processing some other net command (such as tftp). This is useful when
23772 tftp appears to hang.
23774 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
23775 Signed-off-by: Ben Warren <bwarren@qstreams.com>
23777 commit fa1aef15bcd47736687be1af544506e90fba545d
23778 Author: Stefan Roese <sr@denx.de>
23779 Date: Wed Mar 7 16:43:00 2007 +0100
23781 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board
23783 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
23784 DDR memory are dynamically programmed matching the total size
23785 of the equipped memory (DIMM modules).
23787 Signed-off-by: Stefan Roese <sr@denx.de>
23789 commit e2ebe696818939e2b974628be9c921ea3fe9de13
23790 Author: Stefan Roese <sr@denx.de>
23791 Date: Wed Mar 7 16:39:36 2007 +0100
23793 [PATCH] Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's
23795 This patch fixes a problem that occurs when 2 DIMM's are
23796 used. This problem was first spotted and fixed by Gerald Jackson
23797 <gerald.jackson@reaonixsecurity.com> but this patch fixes the
23798 problem in a little more clever way.
23800 This patch also adds the nice functionality to dynamically
23801 create the TLB entries for the SDRAM (tlb.c). So we should
23802 never run into such problems with wrong (too short) TLB
23803 initialization again on these platforms.
23805 As this feature is new to the "old" 44x SPD DDR driver, it
23806 has to be enabled via the CONFIG_PROG_SDRAM_TLB define.
23808 Signed-off-by: Stefan Roese <sr@denx.de>
23810 commit 39218433983417b9df087976a79e3f80dd5e83d6
23811 Author: Wolfgang Denk <wd@denx.de>
23812 Date: Wed Mar 7 16:33:44 2007 +0100
23814 UC101: fix compiler warnings
23816 commit 8d7e2732221bc2d64df14f700c64c23e0a4c3dce
23817 Author: Wolfgang Denk <wd@pollux.denx.de>
23818 Date: Wed Mar 7 16:19:46 2007 +0100
23820 HMI1001: fix build error, cleanup compiler warnings.
23822 commit ad5bb451ade552c44bef9119d907929ebc2c126f
23823 Author: Wolfgang Denk <wd@pollux.denx.de>
23824 Date: Tue Mar 6 18:08:43 2007 +0100
23826 Restructure POST directory to support of other CPUs, boards, etc.
23828 commit a5284efd125967675b2e9c6ef7b95832268ad360
23829 Author: Wolfgang Denk <wd@pollux.denx.de>
23830 Date: Tue Mar 6 18:01:47 2007 +0100
23832 Fix HOSTARCH handling.
23833 Patch by Mike Frysinger, Mar 05 2007
23835 commit 07b7b0037aac5102939917d7cbe561b5c0d5aa44
23836 Author: Stefan Roese <sr@denx.de>
23837 Date: Tue Mar 6 07:47:04 2007 +0100
23839 [PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setup
23841 As provided by the AMCC applications team, this patch optimizes the
23842 DDR2 setup for 166MHz bus speed. The values provided are also save
23843 to use on a "normal" 133MHz PLB bus system. Only the refresh counter
23844 setup has to be adjusted as done in this patch.
23846 For this the NAND booting version had to include the "speed.c" file
23847 from the cpu/ppc4xx directory. With this addition the NAND SPL image
23848 will just fit into the 4kbytes of program space. gcc version 4.x as
23849 provided with ELDK 4.x is needed to generate this optimized code.
23851 Signed-off-by: Stefan Roese <sr@denx.de>
23853 commit 647d3c3eed0da1d1505eecabe0b0fab96f956e68
23854 Author: Wolfgang Denk <wd@pollux.denx.de>
23855 Date: Sun Mar 4 01:36:05 2007 +0100
23859 commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148
23860 Author: Kim Phillips <kim.phillips@freescale.com>
23861 Date: Wed Feb 28 00:02:04 2007 -0600
23863 mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings
23865 (cherry picked from c5bf13b02284c3204a723566a9bab700e5059659 commit)
23867 commit 4feab4de7bfc2cb2fed36ad76f93c3a69659bbaf
23868 Author: Kumar Gala <galak@kernel.crashing.org>
23869 Date: Tue Feb 27 23:51:42 2007 -0600
23871 mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode
23873 The config value for:
23881 Were not being used when setting the appropriate register
23884 * CFG_SCCR_USBMPHCM
23889 To allow full config of the SCCR.
23891 Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349
23892 that were just bogus.
23894 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23896 commit d51b3cf371cd441030460ef19d36b2924c361b1a
23897 Author: Kim Phillips <kim.phillips@freescale.com>
23898 Date: Thu Feb 22 20:06:57 2007 -0600
23900 mpc83xx: update [local-]mac-address properties on UEC based devices
23902 8360 and 832x weren't updating their [local-]mac-address
23903 properties. This patch fixes that.
23905 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23907 commit 61f4f912acbe60776c5e00df1ec94094ce672957
23908 Author: Timur Tabi <timur@freescale.com>
23909 Date: Tue Feb 13 10:41:42 2007 -0600
23911 mpc83xx: write MAC address to mac-address and local-mac-address
23913 Some device trees have a mac-address property, some have local-mac-address,
23914 and some have both. To support all of these device trees, this patch
23915 updates ftp_cpu_setup() to write the MAC address to mac-address if it exists.
23916 This function already updates local-mac-address.
23918 Signed-off-by: Timur Tabi <timur@freescale.com>
23920 commit 22d71a71f57fd5d38b27ac3848e50d790360a598
23921 Author: Kim Phillips <kim.phillips@freescale.com>
23922 Date: Tue Feb 27 18:41:08 2007 -0600
23924 mpc83xx: add command line editing by default
23926 commit 3fc0bd159103b536e1c54c6f4457a09b3aba66ca
23927 Author: Kim Phillips <kim.phillips@freescale.com>
23928 Date: Wed Feb 14 19:50:53 2007 -0600
23930 mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers
23932 Disable G1TXCLK, G2TXCLK h/w buffers. This patch
23933 fixes a networking timeout issue with MPC8360EA (Rev.2) PBs.
23935 Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards.
23937 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23938 Signed-off-by: Emilian Medve <Emilian.Medve@freescale.com>
23940 commit d61853cf2472e0b8bcbd131461a93d1c49ff0c1f
23941 Author: Xie Xiaobo <r63061@freescale.com>
23942 Date: Wed Feb 14 18:27:17 2007 +0800
23944 mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx
23946 The code supply fixed and SPD initialization for MPC83xx DDR2 Controller.
23947 it pass DDR/DDR2 compliance tests.
23949 Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
23951 commit b110f40bd180c6b560276589beedf753e97c46ce
23952 Author: Xie Xiaobo <r63061@freescale.com>
23953 Date: Wed Feb 14 18:27:06 2007 +0800
23955 mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS
23957 MPC8360E rev2.0 have new spridr,and PVR value,
23958 The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM.
23960 Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
23962 commit 8d172c0f0d85998a256a95b7459a5403a30380ed
23963 Author: Xie Xiaobo <r63061@freescale.com>
23964 Date: Wed Feb 14 18:26:44 2007 +0800
23966 mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS
23968 MPC8349E rev3.1 have new spridr,and PVR value,
23969 The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM.
23971 Signed-off-by: Xie Xiaobo<X.Xie@freescale.com>
23973 commit f6f5f709e5c8e4564c4dfeecfdf2279244f9c83b
23974 Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
23975 Date: Wed Jan 31 11:04:19 2007 +0100
23977 mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c
23979 Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0)
23980 which is used to se if an slave will ACK after receiving its address.
23982 Correct i2c probing to use this method as the old method could upset
23983 a slave as it wrote a data byte to it.
23985 Add a small delay in i2c_init() to let the controller
23986 shutdown any ongoing I2C activity.
23988 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
23990 commit 7a78f148d6a7298e4fface680dc7eacd877b1aba
23991 Author: Timur Tabi <timur@freescale.com>
23992 Date: Wed Jan 31 15:54:29 2007 -0600
23994 mpc83xx: Add support for the MPC8349E-mITX-GP
23996 Add support for the MPC8349E-mITX-GP, a stripped-down version of the
23997 MPC8349E-mITX. Bonus features include support for low-boot (BMS bit in
23998 HRCW is 0) for the ITX and a README for the ITX and the ITX-GP.
24000 Signed-off-by: Timur Tabi <timur@freescale.com>
24002 commit fab16807adad350f618024350c6950165c247c72
24003 Author: Timur Tabi <timur@freescale.com>
24004 Date: Wed Jan 31 15:54:20 2007 -0600
24006 mpc83xx: Delete sdram_init() for MPC8349E-mITX
24008 There is no SDRAM on any of the 8349 ITX variants, so function sdram_init()
24009 never does anything. This patch deletes it.
24011 Signed-off-by: Timur Tabi <timur@freescale.com>
24013 commit a87c856eb411b9365937d0d4b9c21e46adbe1c14
24014 Author: Dave Liu <daveliu@freescale.com>
24015 Date: Fri Jan 19 10:43:26 2007 +0800
24017 mpc83xx: Fix the LAW1/3 bug
24019 The patch solves the alignment problem of the local bus access windows to
24020 render accessible the memory bank and PHY registers of UPC 1 (starting at
24021 0xf801 0000). What we actually did was to adjust the sizes of the bus
24022 access windows so that the base address alignment requirement would be met.
24024 Signed-off-by: Chereji Marian <marian.chereji@freescale.com>
24025 Signed-off-by: Gridish Shlomi <gridish@freescale.com>
24026 Signed-off-by: Dave Liu <daveliu@freescale.com>
24028 commit 97c4b397dce236a7318b304667bf89e59d08b17c
24029 Author: Kim Phillips <kim.phillips@freescale.com>
24030 Date: Tue Jan 30 16:15:31 2007 -0600
24032 mpc83xx: don't hang if watchdog configured on 8360, 832x
24034 don't hang if watchdog configured on 8360, 832x
24036 The watchdog programming model is the same across all 83xx devices;
24037 make the code reflect that.
24039 commit b70047478570e371ce7223be342ce98afea0f7d6
24040 Author: Kim Phillips <kim.phillips@freescale.com>
24041 Date: Tue Jan 30 16:15:21 2007 -0600
24043 mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt
24045 protect memcpy to bad address if a local-mac-address is missing from dt
24047 commit 6752ed088c75c26a89b70c46b7326a4cd6015f29
24048 Author: Kim Phillips <kim.phillips@freescale.com>
24049 Date: Tue Jan 30 16:15:04 2007 -0600
24051 mpc83xx: make 8360 default environment fdt be 8360 (not 8349)
24053 make 8360 default environment fdt be 8360 (not 8349)
24055 commit a28899c910024a0226331df07207b1038c300c93
24056 Author: Emilian Medve <Emilian.Medve@freescale.com>
24057 Date: Tue Jan 30 16:14:50 2007 -0600
24059 mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC
24061 The problem is not gcc4 but the code itself. The BD_STATUS() macro can't
24062 be used for busy-waiting since it strips the 'volatile' property from
24063 the bd variable. gcc3 was working by pure luck.
24065 This is a follow on patch to "Fix the UEC driver bug of QE"
24067 commit 3e78a31cfe3d3022f46f67eb88e1281d5cc2eb89
24068 Author: Kumar Gala <galak@kernel.crashing.org>
24069 Date: Tue Jan 30 14:08:30 2007 -0600
24071 mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead
24073 The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all
24074 MPC834X class processors. Change the protections from CONFIG_MPC8349 to
24075 CONFIG_MPC834X so they are more generic.
24077 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
24079 commit ae246dc6c1937c291014eadd90b6d48c438c7cb0
24080 Author: Kim Phillips <kim.phillips@freescale.com>
24081 Date: Thu Jan 25 13:40:55 2007 -0600
24083 mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL
24085 commit 4decd84e8f04279c5cfff7f8e907465ef8d8a3fb
24086 Author: Kim Phillips <kim.phillips@freescale.com>
24087 Date: Wed Jan 24 17:18:37 2007 -0600
24089 mpc83xx: sort Makefile targets
24091 reordered targets alphabetically
24093 commit 91e25769771c1164ed63ffca0add49f934ae3343
24094 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
24095 Date: Tue Jan 16 11:38:14 2007 -0500
24097 mpc83xx: U-Boot support for Wind River SBC8349
24099 I've redone the SBC8349 support to match git-current, which
24100 incorporates all the MPC834x updates from Freescale since the 1.1.6
24101 release, including the DDR changes.
24103 I've kept all the SBC8349 files as parallel as possible to the
24104 MPC8349EMDS ones for ease of maintenance and to allow for easy
24105 inspection of what was changed to support this board. Hence the SBC8349
24106 U-Boot has FDT support and everything else that the MPC8349EMDS has.
24108 Fortunately the Freescale updates added support for boards using CS0,
24109 but I had to change spd_sdram.c to allow for board specific settings for
24110 the sdram_clk_cntl (it is/was hard coded to zero, and that remains the
24111 default if the board doesn't specify a value.)
24113 Hopefully this should be mergeable as-is and require no whitespace
24114 cleanups or similar, but if something doesn't measure up then let me
24115 know and I'll fix it.
24120 commit 05031db456ab227f3e3752f37b9b812b65bb83ad
24121 Author: Sam Song <samsongshu@yahoo.com.cn>
24122 Date: Thu Dec 14 19:03:21 2006 +0800
24124 mpc83xx: Remove a redundant semicolon in mpc8349itx.c
24126 A redundant semicolon existed in mpc8349itx.c
24129 Signed-off-by: Sam Song <samsongshu@yahoo.com.cn>
24131 commit f35f358241c549be3f75cfe2eaa642914275b7ba
24132 Author: Jerry Van Baren <gerald.vanbaren@comcast.net>
24133 Date: Wed Dec 6 21:23:55 2006 -0500
24135 mpc83xx: Put the version (and magic) after the HRCW.
24137 Put the version (and magic) after the HRCW. This puts it in a fixed
24138 location in flash, not at the start of flash but as close as we can get.
24140 Signed-off-by: Jerry Van Baren <vanbaren@cideas.com>
24142 commit 48aecd969171a6e99a55fae04933857787f9a5bd
24143 Author: Dave Liu <r63238@freescale.com>
24144 Date: Thu Dec 7 21:14:51 2006 +0800
24146 mpc83xx: Add the MPC832XEMDS board readme
24148 Add the MPC832XEMDS board readme
24150 Signed-off-by: Dave Liu <daveliu@freescale.com>
24152 commit 24c3aca3f1358b113d3215adb5433b156e99f72b
24153 Author: Dave Liu <r63238@freescale.com>
24154 Date: Thu Dec 7 21:13:15 2006 +0800
24156 mpc83xx: Add support for the MPC832XEMDS board
24158 This patch supports DUART, ETH3/4 and PCI etc.
24160 Signed-off-by: Dave Liu <daveliu@freescale.com>
24162 commit e080313c32322e15ab5a18eb896a252858c57284
24163 Author: Dave Liu <r63238@freescale.com>
24164 Date: Thu Dec 7 21:11:58 2006 +0800
24166 mpc83xx: streamline the 83xx immr head file
24168 For better format and style, I streamlined the 83xx head files,
24169 including immap_83xx.h and mpc83xx.h. In the old head files, 1)
24170 duplicated macro definition appear in the both files; 2) the structure
24171 of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The
24172 macro definition put inside the each structure. So, I cleaned up the
24173 structure of QE immr from immap_83xx.h, deleted the duplicated stuff and
24174 moved the macro definition to mpc83xx.h, Just like MPC8260.
24178 *streamline the 83xx immr head file
24180 Signed-off-by: Dave Liu <daveliu@freescale.com>
24182 commit ddd02492f43db5408f5ab9f823b0ba5796e28ef0
24183 Author: Dave Liu <r63238@freescale.com>
24184 Date: Wed Dec 6 11:38:17 2006 +0800
24186 mpc83xx: Fix the UEC driver bug of QE
24188 The patch prevents the GCC tool chain from striping useful code for
24189 optimization. It will make UEC ethernet driver workable, Otherwise the
24190 UEC will fail in tx when you are using gcc4.x. but the driver can work
24191 when using gcc3.4.3.
24195 *Prevent the GCC from striping code for optimization, Otherwise the UEC
24196 will tx failed when you are using gcc4.x.
24198 Signed-off-by: Dave Liu <daveliu@freescale.com>
24200 commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35
24201 Author: Stefan Roese <sr@denx.de>
24202 Date: Thu Mar 1 21:11:36 2007 +0100
24204 [PATCH] Update AMCC Katmai 440SPe eval board support
24206 This patch updates the recently added Katmai board support. The biggest
24207 change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2
24210 Please note, that still some problems are left with some memory
24211 configurations. See the driver for more details.
24213 Signed-off-by: Stefan Roese <sr@denx.de>
24215 commit 8c12045a3b06c5b6675d3fe02fbc9f545988129a
24216 Author: Stefan Roese <sr@denx.de>
24217 Date: Thu Mar 1 07:03:25 2007 +0100
24219 [PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUM
24221 Signed-off-by: Stefan Roese <sr@denx.de>
24223 commit ccbc7036648e465697ca298ba51e0e76dda352a0
24224 Author: Wolfgang Denk <wd@pollux.denx.de>
24225 Date: Wed Feb 28 01:28:53 2007 +0100
24227 SC3: fix typo in default environment
24229 commit e344568b1b46af85ec32d815586f91bc115d6223
24230 Author: Sergei Poselenov <sposelenov@emcraft.com>
24231 Date: Tue Feb 27 20:15:30 2007 +0300
24233 MCC200: Fixes for update procedure
24235 - fix logic error in image type handling
24236 - make sure file system images (cramfs etc.) get stored in flash
24237 with image header stripped so they can be mounted through MTD
24239 commit 743571145b37182757d4e688a77860b36ee77573
24240 Author: Wolfgang Denk <wd@pollux.denx.de>
24241 Date: Tue Feb 27 14:26:04 2007 +0100
24243 Minor code cleanup.
24245 commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72
24246 Author: Sergei Poselenov <sposelenov@emcraft.com>
24247 Date: Tue Feb 27 12:40:16 2007 +0300
24249 MCC200 update - add LCD Progress Indicator
24251 commit 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44
24252 Author: Stefan Roese <sr@denx.de>
24253 Date: Thu Feb 22 07:43:34 2007 +0100
24255 [PATCH] get_dev() now unconditionally uses manual relocation
24257 Since the relocation fix is not included yet and we're not sure how
24258 it will be added, this patch removes code that required relocation
24259 to be fixed for now.
24261 Signed-off-by: Stefan Roese <sr@denx.de>
24263 commit 8274ec0bd01d2feb2c7f095eba78d42ea009798b
24264 Author: Stefan Roese <sr@denx.de>
24265 Date: Thu Feb 22 07:40:23 2007 +0100
24267 [PATCH] Change systemace driver to select 8 & 16bit mode
24269 As suggested by Grant Likely this patch enables the Xilinx SystemACE
24270 driver to select 8 or 16bit mode upon startup.
24272 Signed-off-by: Stefan Roese <sr@denx.de>
24274 commit 3a197b2fe49d6fa03978e60af2394efe9c70b527
24275 Author: Haiying Wang <Haiying.Wang@freescale.com>
24276 Date: Wed Feb 21 16:52:31 2007 +0100
24278 [PATCH v3] Add sync to ensure flash_write_cmd is fully finished
24280 Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command
24281 is fully finished. The sync() is defined in each CPU's io.h file. For
24282 those CPUs which do not need sync for now, a dummy sync() is defined in
24283 their io.h as well.
24285 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
24287 commit da04995c7dc6772013a9a0dc5c767f190c402478
24288 Author: Stefan Roese <sr@denx.de>
24289 Date: Wed Feb 21 13:44:34 2007 +0100
24291 [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write)
24293 Signed-off-by: Stefan Roese <sr@denx.de>
24295 commit 751bb57107d78978ae08e697c3deba816f5be091
24296 Author: Stefan Roese <sr@denx.de>
24297 Date: Tue Feb 20 13:21:57 2007 +0100
24299 [PATCH] Fix relocation problem with "new" get_dev() function
24301 This patch enables the "new" get_dev() function for block devices
24302 introduced by Grant Likely to be used on systems that still suffer
24303 from the relocation problems (manual relocation neede because of
24304 problems with linker script).
24306 Hopefully we can resolve this relocation issue soon for all platform
24307 so we don't need this additional code anymore.
24309 Signed-off-by: Stefan Roese <sr@denx.de>
24311 commit d93e2212f962668b3dce091ff5edc33f2347fe37
24312 Author: Stefan Roese <sr@denx.de>
24313 Date: Tue Feb 20 13:17:42 2007 +0100
24315 [PATCH] Update SystemACE driver for 16bit access
24317 This patch removes some problems when the Xilinx SystemACE driver
24318 is used with 16bit access on an big endian platform (like the
24321 Signed-off-by: Stefan Roese <sr@denx.de>
24323 commit 874bb7b88fe9b4648e1288a387af2e31014a72f3
24324 Author: Stefan Roese <sr@denx.de>
24325 Date: Tue Feb 20 13:15:40 2007 +0100
24327 [PATCH] Clean up Katmai (440SPe) linker script
24329 Signed-off-by: Stefan Roese <sr@denx.de>
24331 commit 4745acaa1a603b67f6b9b7970365ebadd7d6586f
24332 Author: Stefan Roese <sr@denx.de>
24333 Date: Tue Feb 20 10:57:08 2007 +0100
24335 [PATCH] Add support for the AMCC Katmai (440SPe) eval board
24337 Signed-off-by: Stefan Roese <sr@denx.de>
24339 commit 0dc018ece13effc689e47479ea9ebf1c98a507f5
24340 Author: Stefan Roese <sr@denx.de>
24341 Date: Tue Feb 20 10:51:26 2007 +0100
24343 [PATCH] I2C: Add support for multiple I2C busses for RTC & DTT
24345 This patch switches to the desired I2C bus when the date/dtt
24346 commands are called. This can be configured using the
24347 CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines.
24349 Signed-off-by: Stefan Roese <sr@denx.de>
24351 commit 4037ed3b63923cfcec27f784a89057c3cbabcedb
24352 Author: Stefan Roese <sr@denx.de>
24353 Date: Tue Feb 20 10:43:34 2007 +0100
24355 [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support
24357 This patch adds support for the DDR2 controller used on the
24358 440SP and 440SPe. It is tested on the Katmai (440SPe) eval
24359 board and works fine with the following DIMM modules:
24361 - Corsair CM2X512-5400C4 (512MByte per DIMM)
24362 - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM)
24363 - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM)
24365 This patch also adds the nice functionality to dynamically
24366 create the TLB entries for the SDRAM (tlb.c). So we should
24367 never run into such problems with wrong (too short) TLB
24368 initialization again on these platforms.
24370 Signed-off-by: Stefan Roese <sr@denx.de>
24372 commit 36d830c9830379045f5daa9f542ac1c990c70068
24373 Author: Stefan Roese <sr@denx.de>
24374 Date: Tue Feb 20 10:35:42 2007 +0100
24376 [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files
24378 Since the existing 4xx SPD SDRAM initialization routines for the
24379 405 SDRAM controller and the 440 DDR controller don't have much in
24380 common this patch splits both drivers into different files.
24382 This is in preparation for the 440 DDR2 controller support (440SP/e).
24384 Signed-off-by: Stefan Roese <sr@denx.de>
24386 commit 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6
24387 Author: Stefan Roese <sr@denx.de>
24388 Date: Tue Feb 20 10:27:08 2007 +0100
24390 [PATCH] PPC4xx: Add support for multiple I2C busses
24392 This patch adds support for multiple I2C busses on the PPC4xx
24393 platforms. Define CONFIG_I2C_MULTI_BUS in the board config file
24394 to make use of this feature.
24396 It also merges the 405 and 440 i2c header files into one common
24399 Also the 4xx i2c reset procedure is reworked since I experienced
24400 some problems with the first access on the 440SPe Katmai board.
24402 Signed-off-by: Stefan Roese <sr@denx.de>
24404 commit eb867a76238fb38e952c37871b16d0d7fd61c95f
24405 Author: Grant Likely <grant.likely@secretlab.ca>
24406 Date: Tue Feb 20 09:05:45 2007 +0100
24408 [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers
24410 Block device read/write is anonymous data; there is no need to use a
24411 typed pointer. void * is fine. Also add a hook for block_read functions
24413 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
24415 commit 53758fa20e935cc87eeb0519ed365df753a6f289
24416 Author: Grant Likely <grant.likely@secretlab.ca>
24417 Date: Tue Feb 20 09:05:38 2007 +0100
24419 [PATCH 8_9] Add block_write hook to block_dev_desc_t
24421 Preparation for future patches which support block device writing
24423 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
24425 commit f4852ebe6ca946a509667eb68be42026f837be76
24426 Author: Grant Likely <grant.likely@secretlab.ca>
24427 Date: Tue Feb 20 09:05:31 2007 +0100
24429 [PATCH 7_9] Replace ace_readw_ace_writeb functions with macros
24431 Register read/write does not need to be wrapped in a full function. The
24432 patch replaces them with macros.
24434 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
24436 commit 3a8ce9af6fcb5744a7851b4440c07688acc40844
24437 Author: Grant Likely <grant.likely@secretlab.ca>
24438 Date: Tue Feb 20 09:05:23 2007 +0100
24440 [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c
24442 The code in this file is not a command; it is a device driver. Put it in
24443 the correct place. There are zero functional changes in this patch, it
24444 only moves the file.
24446 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
24448 commit 984618f3e7794c783ec8d1511e74c6ee2d69bfe4
24449 Author: Grant Likely <grant.likely@secretlab.ca>
24450 Date: Tue Feb 20 09:05:16 2007 +0100
24452 [PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent)
24454 This patch is in preparation of additional changes to the sysace driver.
24455 May as well take this opportunity to fixup the inconsistent whitespace since
24456 this file is about to undergo major changes anyway.
24458 There are zero functional changes in this patch. It only cleans up the
24461 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
24463 commit 80ba981d940471fe7e539e64fa3d2bd80002beda
24464 Author: Grant Likely <grant.likely@secretlab.ca>
24465 Date: Tue Feb 20 09:05:07 2007 +0100
24467 [PATCH 4_4] Remove local implementation of isprint() in ft_build.c
24469 isprint is already defined in ctype.c
24471 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
24473 commit c95c4280d751ca078c2ff58228d2f2b44ccf0600
24474 Author: Grant Likely <grant.likely@secretlab.ca>
24475 Date: Tue Feb 20 09:05:00 2007 +0100
24477 [PATCH 3_9] Move buffer print code from md command to common function
24479 Printing a buffer is a darn useful thing. Move the buffer print code
24480 into print_buffer() in lib_generic/
24482 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
24484 commit 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a
24485 Author: Grant Likely <grant.likely@secretlab.ca>
24486 Date: Tue Feb 20 09:04:52 2007 +0100
24488 [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets
24490 Change the xilinx device drivers and board code to include config.h
24491 instead of xparameters.h directly. config.h always includes the
24492 correct xparameters file. This change reduces the posibility of
24493 including the wrong file when adding a new xilinx board port
24495 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
24497 commit 735dd97b1b20e777d059c7b389fe9d70cd3f80c7
24498 Author: Grant Likely <grant.likely@secretlab.ca>
24499 Date: Tue Feb 20 09:04:34 2007 +0100
24501 [PATCH 1_4] Merge common get_dev() routines for block devices
24503 Each of the filesystem drivers duplicate the get_dev routine. This change
24504 merges them into a single function in part.c
24506 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
24508 commit f5fcc3c20b65554e98a165542c36ee0c610a2d81
24509 Author: Wolfgang Denk <wd@pollux.denx.de>
24510 Date: Mon Feb 19 23:09:51 2007 +0100
24512 MCC200: Software Updater: allow both "ramdisk" and "filesystem" types
24513 as root file system images.
24515 commit 489c696ae7211218961d159e43e722d74c36fcbc
24516 Author: Sergei Poselenov <sposelenov@emcraft.com>
24517 Date: Wed Feb 14 14:30:28 2007 +0300
24519 MCC200: Extensions to Software Update Mechanism
24521 Update / extend Software Update Mechanism for MCC200 board:
24523 - Add support for rootfs image added. The environment variables
24524 "rootfs_st" and "rootfs_nd" can be used to override the default
24525 values of the image start and end.
24526 - Remove excessive key check code.
24529 commit 4be23a12f23f1372634edc3215137b09768b7949
24530 Author: Stefan Roese <sr@denx.de>
24531 Date: Mon Feb 19 08:23:15 2007 +0100
24533 [PATCH] Update Sequoia EBC configuration (NOR FLASH)
24535 As spotted by Matthias Fuchs, the READY input should not be
24536 enabled for the NOR FLASH on the Sequoia board.
24538 Signed-off-by: Stefan Roese <sr@denx.de>
24540 commit 2605e90bf676d48123afe5719a846d2b52b24aac
24541 Author: Heiko Schocher <hs@pollux.denx.de>
24542 Date: Fri Feb 16 07:57:42 2007 +0100
24544 [PATCH] Added support for the jupiter board.
24546 Signed-off-by: Heiko Schocher <hs@denx.de>
24548 commit 497d012e5be0194e1084073d0081eb1a844796b2
24549 Author: Gary Jennejohn <garyj@pollux.denx.de>
24550 Date: Mon Feb 12 13:11:50 2007 +0100
24552 LPC2292: patch from Siemens.
24554 commit b0b1a920aebead0d44146e73676ae9d80fffc8e2
24555 Author: Stefan Roese <sr@denx.de>
24556 Date: Sat Feb 10 08:49:31 2007 +0100
24558 [PATCH] Add missing p3mx.h file to repository (ups)
24560 Signed-off-by: Stefan Roese <sr@denx.de>
24562 commit 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a
24563 Author: Bartlomiej Sieka <tur@semihalf.com>
24564 Date: Fri Feb 9 10:45:42 2007 +0100
24566 [Motion-PRO] Preliminary support for the Motion-PRO board.
24568 commit 5a753f98c6a01bd1c61a9a3f95e8329a35f62994
24569 Author: Stefan Roese <sr@denx.de>
24570 Date: Wed Feb 7 16:51:08 2007 +0100
24572 [PATCH] Update some AMCC 4xx board config files (set initrd_high)
24574 Some boards that can have more than 768MBytes of SDRAM need to
24575 set "initrd_high", so that the initrd can be accessed by the
24578 Signed-off-by: Stefan Roese <sr@denx.de>
24580 commit 7372ca68227930d03cffa548310524cad5b96733
24581 Author: Stefan Roese <sr@denx.de>
24582 Date: Fri Feb 2 12:44:22 2007 +0100
24584 [PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards
24586 Previously the strapping DCR/SDR was read to determine if the internal PCI
24587 arbiter is enabled or not. This strapping bit can be overridden, so now
24588 the current status is read from the correct DCR/SDR register.
24590 Signed-off-by: Stefan Roese <sr@denx.de>
24592 commit 2aa54f651a42d198673318f07a20c89a43e4d197
24593 Author: Stefan Roese <sr@denx.de>
24594 Date: Fri Feb 2 12:42:08 2007 +0100
24596 [PATCH] Change configuration output of Sycamore, Yellowstone & Rainier
24598 Signed-off-by: Stefan Roese <sr@denx.de>
24600 commit 23744d6b5bf17592eb6a0ef4f318f6089f55993b
24601 Author: Stefan Roese <sr@denx.de>
24602 Date: Thu Feb 1 13:22:41 2007 +0100
24604 [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file
24606 When PCI PNP is enabled the pci pnp configuration routine is called
24607 which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some
24608 problems with some PCI cards. For now disable the PCI PNP configuration.
24610 Signed-off-by: Stefan Roese <sr@denx.de>
24612 commit 2902fadade3be7659467e8d074048c6b7068f5c0
24613 Author: Stefan Roese <sr@denx.de>
24614 Date: Wed Jan 31 16:56:10 2007 +0100
24616 [PATCH] Update 440EPx/440GRx cpu detection
24618 Signed-off-by: Stefan Roese <sr@denx.de>
24620 commit d5ea287b02a6945c3977410e364a879dd1a555c8
24621 Author: Stefan Roese <sr@denx.de>
24622 Date: Wed Jan 31 16:38:04 2007 +0100
24624 [PATCH] Update esd cpci5200 files
24626 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
24628 commit 8b7d1f0ab7d7c4fe3160bbf74a7e9690d9f3a3ab
24629 Author: Stefan Roese <sr@denx.de>
24630 Date: Wed Jan 31 16:37:34 2007 +0100
24632 [PATCH] Add support for esd mecp5200 board
24634 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
24636 commit 71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff
24637 Author: Stefan Roese <sr@denx.de>
24638 Date: Wed Jan 31 12:38:50 2007 +0100
24640 [PATCH] Remove unneccessary yellowstone board config file
24642 Signed-off-by: Stefan Roese <sr@denx.de>
24644 commit e802594b6fa1b166308820c276b96dc0d7cc731c
24645 Author: Stefan Roese <sr@denx.de>
24646 Date: Tue Jan 30 17:06:10 2007 +0100
24648 [PATCH] Update Sequoia (440EPx) config file
24650 The config file now handles the 2nd target, the Rainier (440GRx)
24651 evaluation board better. Additionally the PPC input clock was
24652 adjusted to match the correct value of 33.0 MHz.
24654 Signed-off-by: Stefan Roese <sr@denx.de>
24656 commit 700200c67e73b83751418abe7815840dca8fd6cb
24657 Author: Stefan Roese <sr@denx.de>
24658 Date: Tue Jan 30 17:04:19 2007 +0100
24660 [PATCH] Merge Yosemite & Yellowstone board ports
24662 Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR)
24663 share one config file and all board specific files. This way we
24664 don't have to maintain two different sets of files for nearly
24667 Signed-off-by: Stefan Roese <sr@denx.de>
24669 commit 1bbf5eae322f5f1f6427ecc3ac13a0cb7dba8ad6
24670 Author: Stefan Roese <sr@denx.de>
24671 Date: Tue Jan 30 15:01:49 2007 +0100
24673 [PATCH] Update Prodrive SCPU (PDNB3 variant) board
24675 SCPU doesn't use redundant environment in flash.
24677 Signed-off-by: Stefan Roese <sr@denx.de>
24679 commit 6304430ed642ea8fa15c9e5af965ac2e033eec45
24680 Author: Stefan Roese <sr@denx.de>
24681 Date: Tue Jan 30 12:51:07 2007 +0100
24683 [PATCH] alpr: Update alpr board config file
24685 Signed-off-by: Stefan Roese <sr@denx.de>
24687 commit f8db84f132b1e335f20f96138a1f09ed97b08664
24688 Author: Wolfgang Denk <wd@pollux.denx.de>
24689 Date: Tue Jan 30 00:50:40 2007 +0100
24691 LPC2292 SODIMM port coding style cleanup.
24693 commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3
24694 Author: Gary Jennejohn <garyj@pollux.denx.de>
24695 Date: Wed Jan 24 12:16:56 2007 +0100
24697 Add port for the lpc2292sodimm evaluation board from EmbeddedArtists
24699 commit 2daf046ba627f85f44195815778140039636244e
24700 Author: Bartlomiej Sieka <tur@semihalf.com>
24701 Date: Tue Jan 23 17:22:06 2007 +0100
24703 [iDMR] Add MTD and JFFS2 support, also add default partition definition.
24705 commit f7db33101fbc9c8f0a10738ce87034875a17aeb9
24706 Author: Bartlomiej Sieka <tur@semihalf.com>
24707 Date: Tue Jan 23 14:21:14 2007 +0100
24709 [iDMR] Flash driver on initialisation write-protects some sectors,
24710 currently sectors 0-3. Sector 3 does not need to be protected, though
24711 (U-boot occupies sectors 0-1 and the environment sector 2). This commit
24712 fixes this, i.e., only sectors 0-2 are protected.
24714 commit 0ed47bb119cd2c4c16edb2548789148f9e6dc9de
24715 Author: Bartlomiej Sieka <tur@semihalf.com>
24716 Date: Tue Jan 23 14:11:22 2007 +0100
24718 [iDMR] Using MII-related commands on iDRM board doesn't work now (e.g.,
24719 "mii device" results in "Unexpected exception"). Fixing this properly
24720 requires some clean-up in the FEC drivers infrastructure for ColdFire, so
24721 this commit disables MII commads for now.
24723 commit 363d1d8f9c99b63daef81f5985cab3fc00edde5c
24724 Author: Bartlomiej Sieka <tur@semihalf.com>
24725 Date: Tue Jan 23 13:25:22 2007 +0100
24727 [ColdFire MCF5271 family] Add CPU detection based on the value of Chip
24728 Identification Register (CIR).
24730 commit fdef388758506765d4d6a7155c8f1584c63ff581
24731 Author: roy zang <tie-fei.zang@freescale.com>
24732 Date: Mon Jan 22 13:19:21 2007 +0800
24734 use CFG_WRITE_SWAPPED_DATA define instead of define CFG_FLASH_CFI_SWAP
24735 The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007
24736 fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support
24739 commit a4012396645533aef218354eeba754dff0deace8
24740 Author: Wolfgang Denk <wd@pollux.denx.de>
24741 Date: Fri Jan 19 23:08:39 2007 +0100
24743 Minor code cleanup.
24745 commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39
24746 Author: Heiko Schocher <hs@pollux.denx.de>
24747 Date: Fri Jan 19 19:57:10 2007 +0100
24749 [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT.
24751 Signed-off-by: Heiko Schocher <hs@denx.de>
24753 commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167
24754 Author: Heiko Schocher <hs@pollux.denx.de>
24755 Date: Fri Jan 19 18:05:26 2007 +0100
24757 [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver
24758 if you must swap the bytes between reading/writing.
24759 (Needed for the SC3 board)
24761 Signed-off-by: Heiko Schocher <hs@denx.de>
24763 commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276
24764 Author: Stefan Roese <sr@denx.de>
24765 Date: Thu Jan 18 16:05:47 2007 +0100
24767 [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board
24769 Signed-off-by: Stefan Roese <sr@denx.de>
24771 commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e
24772 Author: Stefan Roese <sr@denx.de>
24773 Date: Thu Jan 18 11:54:52 2007 +0100
24775 [PATCH] Update Prodrive P3Mx support
24777 Signed-off-by: Stefan Roese <sr@denx.de>
24779 commit 34167a36c29ee946b727465db5c014746a08e978
24780 Author: Stefan Roese <sr@denx.de>
24781 Date: Thu Jan 18 11:48:10 2007 +0100
24783 [PATCH] Add missing Taishan config file
24785 Signed-off-by: Stefan Roese <sr@denx.de>
24787 commit cb4820725e9fc409c5cbc8e83054a6ed522d2111
24788 Author: Heiko Schocher <hs@pollux.denx.de>
24789 Date: Thu Jan 18 11:28:51 2007 +0100
24791 [PATCH] Fix: Compilerwarnings for SC3 board.
24792 The EBC Configuration Register is now by CFG_EBC_CFG definable
24793 Added JFFS2 support for the SC3 board.
24795 Signed-off-by: Heiko Schocher <hs@denx.de>
24797 commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd
24798 Author: Stefan Roese <sr@denx.de>
24799 Date: Thu Jan 18 10:25:34 2007 +0100
24801 [PATCH] Add support for AMCC Taishan PPC440GX eval board
24803 Signed-off-by: Stefan Roese <sr@denx.de>
24805 commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad
24806 Author: Wolfgang Denk <wd@pollux.denx.de>
24807 Date: Tue Jan 16 18:30:50 2007 +0100
24809 Raname solidcard3 into sc3; add redundant env for sc3
24811 commit 1bbbbdd20fcec9933697000dcf55ff7972622596
24812 Author: Wolfgang Denk <wd@pollux.denx.de>
24813 Date: Tue Jan 16 12:46:35 2007 +0100
24815 Update default environment for Solidcard3
24817 commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd
24818 Author: Stefan Roese <sr@denx.de>
24819 Date: Mon Jan 15 09:46:29 2007 +0100
24821 [PATCH] Fix 440SPe rev B detection from previous patch
24823 Signed-off-by: Stefan Roese <sr@denx.de>
24825 commit a443d31410c571ee8f970da819a44d698fdd6b1f
24826 Author: Heiko Schocher <hs@pollux.denx.de>
24827 Date: Sun Jan 14 13:35:31 2007 +0100
24829 [FIX] correct I2C Writes for the LM81 Sensor.
24831 Signed-off-by: Heiko Schocher <hs@denx.de>
24833 commit 0bba5452835f19a61204edcda3a58112fd8e2208
24834 Author: Wolfgang Denk <wd@pollux.denx.de>
24835 Date: Sat Jan 13 11:17:10 2007 +0100
24837 Undo commit 3033ebb2: reset command does not take any arguments
24839 Haiying Wang's modification to the reset command was broken, undo it.
24841 Signed-off-by: Wolfgang Denk <wd@denx.de>
24843 commit 95981778cff0038fd9941044d6a3eda810e33258
24844 Author: Stefan Roese <sr@denx.de>
24845 Date: Sat Jan 13 08:01:03 2007 +0100
24847 [PATCH] Update 440SP(e) cpu revisions
24849 Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.
24851 Signed-off-by: Stefan Roese <sr@denx.de>
24853 commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7
24854 Author: Stefan Roese <sr@denx.de>
24855 Date: Sat Jan 13 07:59:56 2007 +0100
24857 [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed
24859 Now the board revision and the current PCI bus speed are printed after
24862 Also the EBC initialising is now done via defines in the board config
24865 Signed-off-by: Stefan Roese <sr@denx.de>
24867 commit 36adff362c2c0141ff8a810d42a7e478f779130f
24868 Author: Stefan Roese <sr@denx.de>
24869 Date: Sat Jan 13 07:59:19 2007 +0100
24871 [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed
24873 Now the board revision and the current PCI bus speed are printed after
24876 Also the EBC initialising is now done via defines in the board config
24879 Signed-off-by: Stefan Roese <sr@denx.de>
24881 commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6
24882 Author: Stefan Roese <sr@denx.de>
24883 Date: Sat Jan 13 07:57:51 2007 +0100
24885 [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed
24887 Now the board revision and the current PCI bus speed are printed after
24890 Signed-off-by: Stefan Roese <sr@denx.de>
24892 commit ca43ba18e910206ef8063e4b22d282630bff3fd2
24893 Author: Heiko Schocher <hs@pollux.denx.de>
24894 Date: Thu Jan 11 15:44:44 2007 +0100
24896 Added support for the SOLIDCARD III board from Eurodesign
24898 Signed-off-by: Heiko Schocher <hs@denx.de>
24900 commit 6abaee42621c07e81a2cd189ad4368b5e8c50280
24901 Author: Reinhard Thies <Reinhard.Thies@web.de>
24902 Date: Wed Jan 10 14:41:14 2007 +0100
24904 Adjusted default environment for cam5200 board.
24906 commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9
24907 Author: Wolfgang Denk <wd@pollux.denx.de>
24908 Date: Wed Jan 10 15:35:52 2007 +0100
24912 commit 787fa15860a57833e50bd30555079a9cd4e519b8
24913 Author: Wolfgang Denk <wd@pollux.denx.de>
24914 Date: Wed Jan 10 01:28:39 2007 +0100
24916 Fix auto_update for MCC200 board.
24918 The invocation of do_auto_update() is moved to the end of the
24919 misc_init_r() function, after the flash mappings have been
24920 initialized. Please find attached a patch that implements that
24923 Also correct the decoding of the keypad status. With this update, the
24924 key that will trigger the update is Column 2, Row 2.
24926 commit d9384de2f571046e71081bae22b49e3d5ca2e3d5
24927 Author: Marian Balakowicz <m8@semihalf.com>
24928 Date: Wed Jan 10 00:26:15 2007 +0100
24930 CAM5200 flash driver modifications:
24931 - use CFI driver (replaces custom flash driver) for main 'cam5200' target
24932 - add second build target 'cam5200_niosflash' which still uses custom driver
24934 commit 67fea022fa957f59653b5238c7496f80a6b70432
24935 Author: Markus Klotzbuecher <mk@denx.de>
24936 Date: Tue Jan 9 16:02:48 2007 +0100
24938 SPC1920: cleanup memory contoller setup
24940 commit 8fc2102faa23593c80381437c09f7745a14deb40
24941 Author: Markus Klotzbuecher <mk@denx.de>
24942 Date: Tue Jan 9 14:57:14 2007 +0100
24944 Fix the cpu speed setup to work with all boards.
24946 commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c
24947 Author: Markus Klotzbuecher <mk@denx.de>
24948 Date: Tue Jan 9 14:57:13 2007 +0100
24950 SPC1920: add support for the FM18L08 Ramtron FRAM
24952 commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223
24953 Author: Markus Klotzbuecher <mk@denx.de>
24954 Date: Tue Jan 9 14:57:13 2007 +0100
24956 SPC1920: update the HPI register addresses to work with the second
24957 generation of hardware
24959 commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e
24960 Author: Markus Klotzbuecher <mk@creamnet.de>
24961 Date: Tue Jan 9 14:57:13 2007 +0100
24963 Miscellanious spc1920 related cleanups
24965 commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120
24966 Author: Markus Klotzbuecher <mk@denx.de>
24967 Date: Tue Jan 9 14:57:12 2007 +0100
24969 SPC1920 GO/NOGO led should be set to color red in U-Boot
24971 commit 0be62728aac459ba268d6d752ed49ec0e2bc7348
24972 Author: Markus Klotzbuecher <mk@creamnet.de>
24973 Date: Tue Jan 9 14:57:12 2007 +0100
24975 Add support for the DS3231 RTC
24977 commit 8139567b60d678584b05f0718a681f2047c5e14f
24978 Author: Markus Klotzbuecher <mk@creamnet.de>
24979 Date: Tue Jan 9 14:57:11 2007 +0100
24981 SMC1 uses external CLK4 instead of BRG on spc1920
24983 commit d8d9de1a02fbd880b613d607143d1f57342affc7
24984 Author: Markus Klotzbuecher <mk@creamnet.de>
24985 Date: Tue Jan 9 14:57:10 2007 +0100
24987 Update the SPC1920 CMB PLD driver
24989 commit 3f34f869162750e5e999fd140f884f5de952bcfe
24990 Author: Markus Klotzbuecher <mk@creamnet.de>
24991 Date: Tue Jan 9 14:57:10 2007 +0100
24993 Add / enable I2C support on the spc1920 board
24995 commit d28707dbce1e9ac2017ad051da4133bf22b4204f
24996 Author: Markus Klotzbuecher <mk@creamnet.de>
24997 Date: Tue Jan 9 14:57:10 2007 +0100
24999 Add support for the tms320671x host port interface (HPI)
25001 commit f4eb54529bb3664c3a562e488b460fe075f79d67
25002 Author: Wolfgang Denk <wd@pollux.denx.de>
25003 Date: Sun Jan 7 00:13:11 2007 +0100
25005 Prepare for release 1.2.0
25007 commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02
25008 Author: Stefan Roese <sr@denx.de>
25009 Date: Sat Jan 6 15:58:09 2007 +0100
25011 [PATCH] 44x: Fix problem with DDR controller setup (refresh rate)
25013 This patch fixes a problem with an incorrect setup for the refresh
25014 timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c
25016 Signed-off-by: Stefan Roese <sr@denx.de>
25018 commit f16c1da9577f06c5fc08651a4065537407de4635
25019 Author: Stefan Roese <sr@denx.de>
25020 Date: Sat Jan 6 15:56:13 2007 +0100
25022 [PATCH] Update ALPR board files
25024 This update brings the ALPR board support to the newest version.
25025 It also fixes a problem with the NAND driver.
25027 Signed-off-by: Stefan Roese <sr@denx.de>
25029 commit cd1d937f90250a32988c37b2b4af8364d25de8ed
25030 Author: Stefan Roese <sr@denx.de>
25031 Date: Fri Jan 5 11:46:05 2007 +0100
25033 [PATCH] nand: Fix problem with oobsize calculation
25035 Here the description from Brian Brelsford <Brian_Brelsford@dell.com>:
25037 The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part
25038 returns a 0x15. In the code fragment below bits [1:0] determine the
25039 page size, it is ANDed via "(extid & 0x3)" then shifted out. The
25040 next field is also ANDed with 0x3. However this is a one bit field
25041 as defined in the Hynix and Samsung parts in the 4th ID byte that
25042 determins the oobsize, not a two bit field. It works on Samsung as
25043 bits[3:2] are 01. However for the Hynix there is a 11 in these two
25044 bits, so the oob size gets messed up.
25046 I checked the correct linux code and the suggested fix from Brian is
25047 also available in the linux nand mtd driver.
25049 Signed-off-by: Stefan Roese <sr@denx.de>
25051 commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e
25052 Author: Stefan Roese <sr@denx.de>
25053 Date: Fri Jan 5 10:40:36 2007 +0100
25055 [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)
25057 This fix will make the MAL burst disabling patch for the Linux
25058 EMAC driver obsolete.
25060 Signed-off-by: Stefan Roese <sr@denx.de>
25062 commit 023889838282b6237b401664f22dd22dfba2c066
25063 Author: Stefan Roese <sr@denx.de>
25064 Date: Fri Jan 5 10:38:05 2007 +0100
25066 [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board
25068 This code will optimize the DDR2 controller setup on a board specific
25071 Note: This code doesn't work right now on the NAND booting image for the
25072 Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.
25074 Signed-off-by: Stefan Roese <sr@denx.de>
25076 commit cce4acbb68398634b8d011ed7bb0d12269c84230
25077 Author: Bartlomiej Sieka <tur@semihalf.com>
25078 Date: Thu Dec 28 19:08:21 2006 +0100
25081 - fix a typo in V38B config file
25082 - move watchdog initialisation earlier in the boot process
25083 - add "wdt=off" to default kernel command line (disables kernel watchdog)
25085 commit 92eb729bad876725aeea908d2addba0800620840
25086 Author: Wolfgang Denk <wd@pollux.denx.de>
25087 Date: Wed Dec 27 01:26:13 2006 +0100
25089 Fix bug in adaption of Stefano Babic's CFI driver patch.
25091 commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3
25092 Author: Wolfgang Denk <wd@pollux.denx.de>
25093 Date: Sun Dec 24 01:42:57 2006 +0100
25095 Minor code cleanup.
25097 commit d784fdb05900ada3686d5778783e1fb328e9fb66
25098 Author: Stefano Babic <sbabic@denx.de>
25099 Date: Tue Dec 12 00:22:42 2006 +0100
25101 Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode)
25103 commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2
25104 Author: Stefan Roese <sr@denx.de>
25105 Date: Fri Dec 22 14:29:40 2006 +0100
25107 [PATCH] Fix sequoia flash autodetection (finally correct)
25109 Now 32MByte and 64MByte FLASH is know to work and other
25110 configurations should work too.
25112 Signed-off-by: Stefan Roese <sr@denx.de>
25114 commit 82e5236a8b719543643fd26d5827938ab2b94818
25115 Author: Wolfgang Denk <wd@pollux.denx.de>
25116 Date: Fri Dec 22 10:30:26 2006 +0100
25118 Minor code cleanup; update CHANGELOG.
25120 commit fa23044564091f05d9695beb7b5b9a931e7f41a4
25121 Author: Heiko Schocher <hs@pollux.denx.de>
25122 Date: Thu Dec 21 17:17:02 2006 +0100
25124 Added support for the TQM8272 board from TQ
25126 Signed-off-by: Heiko Schocher <hs@denx.de>
25128 commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c
25129 Author: Heiko Schocher <hs@pollux.denx.de>
25130 Date: Thu Dec 21 16:14:48 2006 +0100
25132 [PATCH] Add support for the UC101 board from MAN.
25134 Signed-off-by: Heiko Schocher <hs@denx.de>
25136 commit c84bad0ef60e7055ab0bd49b93069509cecc382a
25137 Author: Bartlomiej Sieka <tur@semihalf.com>
25138 Date: Wed Dec 20 00:29:43 2006 +0100
25140 Fix to make the baudrate changes immediate for the MCF52x2 family.
25142 commit daa6e418bcc0c717752e8de939c213c790286096
25143 Author: Bartlomiej Sieka <tur@semihalf.com>
25144 Date: Wed Dec 20 00:27:32 2006 +0100
25146 Preliminary support for the iDMR board (ColdFire).
25148 commit cdb97a6678826f85e7c69eae6a1c113d034c9b10
25149 Author: Andrei Safronov <safronov@pollux.denx.de>
25150 Date: Fri Dec 8 16:23:08 2006 +0100
25152 automatic update mechanism
25154 commit 9d27b3a0685ff99fc477983f315c04d49f657a8a
25155 Author: roy zang <tie-fei.zang@freescale.com>
25156 Date: Mon Dec 4 17:56:59 2006 +0800
25158 Slight code clean up.
25159 Add comments, delete duplicate define and remove spaces.
25160 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
25162 commit 4dbcd69e3e2776ea334590d5768e3692c5fae5c1
25163 Author: roy zang <tie-fei.zang@freescale.com>
25164 Date: Mon Dec 4 17:54:21 2006 +0800
25166 Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The original
25167 multiplier table can not refect the real PLL clock behavior of these
25168 processors. Please refer to the hardware specification for detailed
25169 information of the corresponding processors.
25170 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
25172 commit 4efe20c9579011d9987f62ed7d35ee8cdc1cf0e0
25173 Author: roy zang <tie-fei.zang@freescale.com>
25174 Date: Mon Dec 4 14:46:23 2006 +0800
25176 Remove the static MAC address, ip address, server ip, netmask and
25177 gateway ip for network setting.
25178 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
25180 commit 6f12c61cf31ed73d72ddfcfc712a854a3a177aaf
25181 Author: roy zang <tie-fei.zang@freescale.com>
25182 Date: Mon Dec 4 14:33:08 2006 +0800
25184 Remove the duplicate memory test code for mpc744ihpc2 board.
25185 If a memory test is needed, please use the functions in
25186 post/memory.c or memtest command.
25187 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
25189 commit c9c1eeed7dd193fa65fb194654132040d49d4d3a
25190 Author: roy zang <tie-fei.zang@freescale.com>
25191 Date: Fri Dec 1 19:01:25 2006 +0800
25193 Fix the exception occuring in RAM table search issue.
25194 The original search_one_table() function code can only processes the search
25195 for the exception occurring in FLASH/ROM, because the exception and fixup
25196 table usually locate in FLASH. If the exception address is also in
25197 FLASH, it will be OK.
25198 If the exception occurs in RAM, after the u-boot relocation, a
25199 relocation offset should be added.
25201 clean up the code in cpu/74xx_7xx/cpu.c
25203 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
25205 commit ee311214e0d216f904feea269599d0934bf71f23
25206 Author: roy zang <tie-fei.zang@freescale.com>
25207 Date: Fri Dec 1 11:47:36 2006 +0800
25209 Clean up the code according to codestyle:
25210 (1) remove some C++ comments.
25211 (2) remove trailing white space.
25212 (3) remove trailing empty line.
25213 (4) Indentation by table.
25214 (5) remove {} in one line condition.
25215 (6) add space before '(' in function call.
25216 Remove some weird printf () output.
25217 Add necessary comments.
25218 Modified Makefile to support building in a separate directory.
25220 commit dd520bf314c7add4183c5191692180f576f96b60
25221 Author: Wolfgang Denk <wd@pollux.denx.de>
25222 Date: Thu Nov 30 18:02:20 2006 +0100
25226 commit 8d9a8610b8256331132227e9e6585c6bd5742787
25227 Author: Wolfgang Denk <wd@pollux.denx.de>
25228 Date: Thu Nov 30 01:54:07 2006 +0100
25230 Code cleanup. Update CHANGELOG.
25232 commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba
25233 Author: Grant Likely <grant.likely@secretlab.ca>
25234 Date: Wed Nov 29 16:23:42 2006 +0100
25236 [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals
25238 The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
25239 not the XLB frequency.
25241 This patch depends on the previous patches for MPC52xx device tree support
25243 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
25244 Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
25246 commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6
25247 Author: Stefan Roese <sr@denx.de>
25248 Date: Wed Nov 29 15:42:37 2006 +0100
25250 [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards
25252 This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
25253 and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
25254 quite similar and share the same board directory "prodrive/p3mx"
25255 and the same config file "p3mx.h".
25257 Signed-off-by: Stefan Roese <sr@denx.de>
25259 commit 1bdd46832aeb569f5e04b1f20f64318525b6525a
25260 Author: Stefan Roese <sr@denx.de>
25261 Date: Wed Nov 29 12:53:15 2006 +0100
25263 [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command
25265 In the bootvx command the load address was only read from the env
25266 variable "loadaddr" and not optionally passed as paramter as described
25267 in the help. This is fixed with this patch. The behaviour is now the
25268 same as in the bootelf command.
25270 Signed-off-by: Stefan Roese <sr@denx.de>
25272 commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592
25273 Author: Stefan Roese <sr@denx.de>
25274 Date: Wed Nov 29 12:03:57 2006 +0100
25276 [PATCH] include/ppc440.h minor error affecting interrupts
25278 Fixed include/ppc440.c for UIC address Bug
25280 Corrects bug affecting the addresses for the universal interrupt
25281 controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips.
25283 Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
25284 Signed-off-by: Stefan Roese <sr@denx.de>
25286 commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a
25287 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
25288 Date: Tue Nov 28 16:17:27 2006 -0600
25290 Make fsl-i2c not conflict with SOFT I2C
25292 Signed-off-by: Timur Tabi <timur@freescale.com>
25294 commit 14198bf768fdc958e3c1afd2404e5262208e98d7
25295 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
25296 Date: Tue Nov 28 16:17:18 2006 -0600
25298 Fix I2C master address initialization.
25300 Signed-off-by: Timur Tabi <timur@freescale.com>
25302 commit cf3d045e51ca8dcc6cf759827140861d6ac25c04
25303 Author: Kim Phillips <kim.phillips@freescale.com>
25304 Date: Tue Nov 28 23:31:19 2006 -0600
25306 Assign maintainers for mpc8349emds and mpc8360emds
25308 Dave for mpc8360emds, and me for mpc8349emds.
25310 commit 1aa934c81b77f2080d3ca4b226eab67b17a33961
25311 Author: Kim Phillips <kim.phillips@freescale.com>
25312 Date: Tue Nov 28 23:28:33 2006 -0600
25314 Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c
25316 give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src
25317 since they are passed by reference to ucc_get_cmxucr_reg and assigned.
25319 commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5
25320 Author: Timur Tabi <timur@freescale.com>
25321 Date: Tue Nov 28 12:09:35 2006 -0600
25323 mpc83xx: Miscellaneous code style fixes
25325 Implement various code style fixes and similar changes.
25327 Signed-off-by: Timur Tabi <timur@freescale.com>
25329 commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706
25330 Author: Stefan Roese <sr@denx.de>
25331 Date: Tue Nov 28 17:55:49 2006 +0100
25333 [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
25335 This patch adds the code and configuration necessary to boot with an
25336 arch/powerpc Linux kernel.
25338 Signed-off-by: Grant Likely <grant.likely@gmail.com>
25339 Acked-by: Jon Loeliger <jdl@freescale.com>
25341 commit e732faec95a83cb468b4850ae807c8301dde8f6a
25342 Author: Stefan Roese <sr@denx.de>
25343 Date: Tue Nov 28 16:09:24 2006 +0100
25345 [PATCH] PPC4xx: 440SP Rev. C detection added
25347 Signed-off-by: Stefan Roese <sr@denx.de>
25349 commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0
25350 Author: Stefan Roese <sr@denx.de>
25351 Date: Tue Nov 28 11:04:45 2006 +0100
25353 [PATCH] nand: Fix patch merge problem
25355 Signed-off-by: Stefan Roese <sr@denx.de>
25357 commit 58e3b14c18ed3288ceef8d086946dbf3df64ccf2
25358 Author: Stefan Roese <sr@denx.de>
25359 Date: Tue Nov 28 11:04:45 2006 +0100
25361 [PATCH] nand: Fix patch merge problem
25363 Signed-off-by: Stefan Roese <sr@denx.de>
25365 commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
25366 Author: Wolfgang Denk <wd@pollux.denx.de>
25367 Date: Mon Nov 27 22:53:53 2006 +0100
25371 commit f6e495f54cdb8fe340b9c03deab40ad746d52fae
25372 Author: Stefan Roese <sr@denx.de>
25373 Date: Mon Nov 27 17:43:25 2006 +0100
25375 [PATCH] 4xx_enet.c: Correct the setting of zmiifer register
25377 Patch below corrects the setting of the zmiifer register, it was
25378 overwritting the register rather than ORing the settings.
25380 Signed-off-by: Neil Wilson <NWilson@airspan.com>
25381 Signed-off-by: Stefan Roese <sr@denx.de>
25383 commit d1a72545296800b7e219f93104ad5836f0003d66
25384 Author: Stefan Roese <sr@denx.de>
25385 Date: Mon Nov 27 17:34:10 2006 +0100
25387 [PATCH] Select NAND embedded environment from board configuration
25389 The current NAND Bootloader setup forces the environment
25390 variables to be in line with the bootloader. This change
25391 enables the configuration to be made in the board include
25392 file instead so that it can be individually enabled.
25394 Signed-off-by: Nick Spence <nick.spence@freescale.com>
25395 Signed-off-by: Stefan Roese <sr@denx.de>
25397 commit 15784862857c3c2214498defcfed84ff137fb81e
25398 Author: Stefan Roese <sr@denx.de>
25399 Date: Mon Nov 27 17:22:19 2006 +0100
25401 [PATCH] nand_wait() timeout fixes
25403 Two fixes for the nand_wait() function in
25404 drivers/nand/nand_base.c:
25406 1. Use correct timeouts. The original timeouts in Linux
25407 source are 400ms and 20ms not 40s and 20s
25409 2. Return correct error value in case of timeout. 0 is
25412 Signed-off-by: Rui Sousa <rui.sousa@laposte.net>
25413 Signed-off-by: Stefan Roese <sr@denx.de>
25415 commit da5553b095bf04f4f109ad7e565dae3aba47b230
25416 Author: Stefan Roese <sr@denx.de>
25417 Date: Mon Nov 27 17:04:06 2006 +0100
25419 [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
25421 This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
25422 arguments to bootm. It removes the getenv("disable_of") test that used
25423 to be used for this purpose.
25425 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
25426 Acked-by: Jon Loeliger <jdl@freescale.com>
25428 commit a9398e018593782c5fa7d0741955fc1256b34c1e
25429 Author: Wolfgang Denk <wd@pollux.denx.de>
25430 Date: Mon Nov 27 15:32:42 2006 +0100
25432 Minor code cleanup. Update CHANGELOG.
25434 commit 1729b92cde575476684bffe819d0b7791b57bff2
25435 Author: Stefan Roese <sr@denx.de>
25436 Date: Mon Nov 27 14:52:04 2006 +0100
25438 [PATCH] 4xx: Fix problem with board specific reset code (now for real)
25440 Signed-off-by: Stefan Roese <sr@denx.de>
25442 commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7
25443 Author: Stefan Roese <sr@denx.de>
25444 Date: Mon Nov 27 14:49:51 2006 +0100
25446 [PATCH] alpr: remove unused board specific flash driver
25448 Signed-off-by: Stefan Roese <sr@denx.de>
25450 commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1
25451 Author: Stefan Roese <sr@denx.de>
25452 Date: Mon Nov 27 14:48:41 2006 +0100
25454 [PATCH] 4xx: Fix problem with board specific reset code
25456 Signed-off-by: Stefan Roese <sr@denx.de>
25458 commit ec0c2ec725aec9524a177a77ce75559e644a931a
25459 Author: Stefan Roese <sr@denx.de>
25460 Date: Mon Nov 27 14:46:06 2006 +0100
25462 [PATCH] Remove testing 4xx enet PHY setup
25464 Signed-off-by: Stefan Roese <sr@denx.de>
25466 commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148
25467 Author: Stefan Roese <sr@denx.de>
25468 Date: Mon Nov 27 14:12:17 2006 +0100
25470 [PATCH] Update Prodrive ALPR board support (440GX)
25472 Signed-off-by: Stefan Roese <sr@denx.de>
25474 commit 58b485776698c3d71ec5a215e392123b4c15afa3
25475 Author: Markus Klotzbuecher <mk@denx.de>
25476 Date: Mon Nov 27 11:51:21 2006 +0100
25478 Add a small README with information on the generic ohci driver.
25480 commit ae3b770e4eae8e98b6e9e29662e18c47fdf0171f
25481 Author: Markus Klotzbuecher <mk@denx.de>
25482 Date: Mon Nov 27 11:46:46 2006 +0100
25484 Fix some endianness issues related to the generic ohci driver
25486 commit 7b59b3c7a8ce2e4b567abf99c1cd667bf35b9418
25487 Author: Markus Klotzbuecher <mk@denx.de>
25488 Date: Mon Nov 27 11:44:58 2006 +0100
25490 Introduced the configuration option CONFIG_USB_OHCI_NEW in order to be able
25491 to choose between the old and the generic OHCI drivers.
25493 commit 53e336e9ffc51035bdc4e5867631b3378761b4df
25494 Author: Markus Klotzbuecher <mk@denx.de>
25495 Date: Mon Nov 27 11:43:09 2006 +0100
25497 Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver
25498 and adapted board configs TQM5200 and yosemite accordingly. This commit
25499 also makes the maximum number of root hub ports configurable
25500 (CFG_USB_OHCI_MAX_ROOT_PORTS).
25502 commit 78d620ebb5871d252270dedfad60c6568993b780
25503 Author: Wolfgang Denk <wd@atlas.denx.de>
25504 Date: Thu Nov 23 22:58:58 2006 +0100
25506 Updates for TQM5200 modules:
25507 - fix off-by-one error in board/tqm5200/cam5200_flash.c error message
25508 - simplify "udate" definitions
25510 commit 2053283304eeddf250d109e6791eb6fa4cad14f7
25511 Author: Stefan Roese <sr@denx.de>
25512 Date: Wed Nov 22 13:20:50 2006 +0100
25514 [PATCH] PPC4xx start.S: Fix for processor errata
25516 Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
25517 errata 1.12: 440_33 by moving patch up in code.
25519 Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
25520 Signed-off-by: Stefan Roese <sr@denx.de>
25522 commit 4ef6251403f637841000e0fef9e832aa01339822
25523 Author: Stefan Roese <sr@denx.de>
25524 Date: Mon Nov 20 20:39:52 2006 +0100
25526 [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
25528 Signed-off-by: Stefan Roese <sr@denx.de>
25530 commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0
25531 Author: Wolfgang Denk <wd@pollux.denx.de>
25532 Date: Mon Nov 20 10:28:30 2006 +0100
25536 commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
25537 Author: Stefan Roese <sr@denx.de>
25538 Date: Mon Nov 13 13:55:24 2006 +0100
25540 [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]
25542 * Adds support for AMD command set Top Boot flash geometry reversal
25543 * Adds support for reading JEDEC Manufacturer ID and Device ID
25544 * Adds support for displaying command set, manufacturer id and
25545 device ids (flinfo)
25546 * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
25547 * Removes outdated change history (refer to git log instead)
25549 Signed-off-by: Tolunay Orkun <listmember@orkun.us>
25550 Signed-off-by: Stefan Roese <sr@denx.de>
25552 commit b21b511d4c50408f4853f46f06b601272196223f
25553 Author: Wolfgang Denk <wd@pollux.denx.de>
25554 Date: Sun Nov 12 21:13:23 2006 +0100
25558 commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245
25559 Author: Bartlomiej Sieka <tur@semihalf.com>
25560 Date: Sat Nov 11 22:48:22 2006 +0100
25562 Disable the watchdog in the default config for the V38B board.
25564 commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a
25565 Author: Bartlomiej Sieka <tur@semihalf.com>
25566 Date: Sat Nov 11 22:43:00 2006 +0100
25568 Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin
25569 group is enabled for USB earlier (in cpu_init_f() instead of
25570 usb_lowlevel_init()).
25572 commit 91650b3e4de688038d4f71279c44858e3e2c6870
25573 Author: Wolfgang Denk <wd@pollux.denx.de>
25574 Date: Mon Nov 6 17:06:36 2006 +0100
25576 Sequential accesses to non-existent memory must be synchronized,
25577 at least on G2 cores.
25579 This fixes get_ram_size() problems on MPC5200 Rev. B boards.
25581 commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa
25582 Author: Timur Tabi <timur@freescale.com>
25583 Date: Fri Nov 3 19:15:00 2006 -0600
25585 mpc83xx: Update 83xx to use fsl_i2c.c
25587 Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete
25588 cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
25589 Added multiple I2C bus support to fsl_i2c.c.
25591 Signed-off-by: Timur Tabi <timur@freescale.com>
25593 commit d239d74b1c937984bc519083a8e7de373a390f06
25594 Author: Timur Tabi <timur@freescale.com>
25595 Date: Fri Nov 3 12:00:28 2006 -0600
25597 mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR
25599 Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
25600 tree matches the other 8xxx trees.
25602 Signed-off-by: Timur Tabi <timur@freescale.com>
25604 commit f7fb2e703ec9688541416962724adff70a7322cb
25605 Author: Kim Phillips <kim.phillips@freescale.com>
25606 Date: Thu Nov 2 19:47:11 2006 -0600
25608 mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c
25610 commit 90f30a710a3c619b5405860a686c4ddfc495d4b6
25611 Author: Dave Liu <daveliu@freescale.com>
25612 Date: Thu Nov 2 18:05:50 2006 -0600
25614 mpc83xx: Fix the incorrect dcbz operation
25616 The 834x rev1.x silicon has one CPU5 errata.
25618 The issue is when the data cache locked with
25619 HID0[DLOCK], the dcbz instruction looks like no-op inst.
25621 The right behavior of the data cache is when the data cache
25622 Locked with HID0[DLOCK], the dcbz instruction allocates
25625 The 834x rev3.0 and later and 8360 have not this bug inside.
25627 So, when 834x rev3.0/8360 are working with ECC, the dcbz
25628 instruction will corrupt the stack in cache, the processor will
25631 However, the 834x rev1.x can work with ECC with these code,
25632 because the sillicon has this cache bug. The dcbz will not
25633 corrupt the stack in cache.
25634 Really, it is the fault code running on fault sillicon.
25636 This patch fix the incorrect dcbz operation. Instead of
25637 CPU FP writing to initialise the ECC.
25640 * Fix the incorrect dcbz operation instead of CPU FP
25641 writing to initialise the ECC memory. Otherwise, it
25642 will corrupt the stack in cache, The processor will checkstop
25645 Signed-off-by: Dave Liu <daveliu@freescale.com>
25647 commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d
25648 Author: Kim Phillips <kim.phillips@freescale.com>
25649 Date: Wed Nov 1 00:10:40 2006 -0600
25651 mpc83xx: add OF_FLAT_TREE bits to 83xx boards
25653 add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and
25654 STDOUT_PATH configuration bits to mpc8349emds,
25655 mpc8349itx, and mpc8360emds board code.
25657 redo environment to use bootm with the fdtaddr
25658 for booting ARCH=powerpc kernels by default,
25659 and provide default fdtaddr values.
25661 commit 48041365b3420589ad464ebc7752e0053538b729
25662 Author: Kim Phillips <kim.phillips@freescale.com>
25663 Date: Wed Nov 1 00:07:25 2006 -0600
25665 mpc83xx: change ft code to modify local-mac-address property
25667 Update 83xx OF code to update local-mac-address properties
25668 for ethernet instead of the obsolete 'address' property.
25670 commit 9ca880a250870a7d55754291b5591d2b5fe89b54
25671 Author: Timur Tabi <timur@freescale.com>
25672 Date: Tue Oct 31 21:23:16 2006 -0600
25674 mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS
25676 This patch also adds an improved I2C set_speed(), which handles all clock
25679 Signed-off-by: Timur Tabi <timur@freescale.com>
25681 commit ac4b5622ce050b5ee1e154b98df630d778661632
25682 Author: Dave Liu <daveliu@freescale.com>
25683 Date: Tue Oct 31 19:54:59 2006 -0600
25685 mpc83xx: add the README.mpc8360emds
25687 add doc/README.mpc8360emds to accompany the new board support
25689 commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef
25690 Author: Dave Liu <daveliu@freescale.com>
25691 Date: Fri Nov 3 12:11:15 2006 -0600
25693 mpc83xx: add QE ethernet support
25695 this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
25697 commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73
25698 Author: Dave Liu <daveliu@freescale.com>
25699 Date: Fri Nov 3 19:33:44 2006 -0600
25701 mpc83xx: Add MPC8360EMDS basic board support
25703 Add support for the Freescale MPC8360EMDS board.
25704 Includes DDR, DUART, Local Bus, PCI.
25706 commit 23892e49352de74f7fac36ff90bb1be143d195e3
25707 Author: Dave Liu <daveliu@freescale.com>
25708 Date: Tue Oct 31 19:30:40 2006 -0600
25710 mpc83xx: add the QUICC Engine (QE) immap file
25712 common QE immap file. Also required for 8360.
25714 commit b701652a4992bdcc62fb1a6038a85beef9e55da4
25715 Author: Dave Liu <daveliu@freescale.com>
25716 Date: Tue Oct 31 19:25:38 2006 -0600
25718 mpc83xx: Add 8360 specifics to 83xx immap
25720 Mainly add QE device dependencies, with appropriate 8360 protection.
25723 commit 988833324a7fda482c8ac3ca23eb539f8232e404
25724 Author: Timur Tabi <timur@freescale.com>
25725 Date: Tue Oct 31 19:14:41 2006 -0600
25727 mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX
25729 PREREQUISITE PATCHES:
25731 * This patch can only be applied after the following patches have been applied:
25733 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2"
25734 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2"
25738 * For the 8349E-mITX, fix some size values in pci_init_board(), enable
25739 the clock for the 2nd USB board (Linux kernel will hang otherwise),
25740 and fix the CONFIG_BOOTARGS macro.
25742 Signed-off-by: Timur Tabi <timur@freescale.com>
25744 commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357
25745 Author: Timur Tabi <timur@freescale.com>
25746 Date: Tue Oct 31 18:44:42 2006 -0600
25748 mpc83xx: Add support for the MPC8349E-mITX
25750 PREREQUISITE PATCHES:
25752 * This patch can only be applied after the following patches have been applied:
25754 1) DNX#2006090742000024 "Add support for multiple I2C buses"
25755 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
25756 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
25757 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
25758 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"
25762 * Add support for the Freescale MPC8349E-mITX reference design platform.
25763 The second TSEC (Vitesse 7385 switch) is not supported at this time.
25765 Signed-off-by: Timur Tabi <timur@freescale.com>
25767 commit 183da6d9b446cc12123455844ad1187e2375626f
25768 Author: Ben Warren <bwarren@qstreams.com>
25769 Date: Tue Sep 12 10:15:53 2006 -0400
25771 Additional MPC8349 support for multibus i2c
25775 Here is a patch for a file that was accidentally left out of a previous
25778 It accompanies the patch with ticket DNX#2006090742000024
25781 Change PCI initialization to use new multi-bus I2C API.
25786 commit b24f119d672b709d153ff2ac091d4aa63ec6877d
25787 Author: Ben Warren <bwarren@qstreams.com>
25788 Date: Thu Sep 7 16:51:04 2006 -0400
25790 Multi-bus I2C implementation of MPC834x
25794 Attached is a patch implementing multiple I2C buses on the MPC834x CPU
25795 family and the MPC8349EMDS board in particular.
25796 This patch requires Patch 1 (Add support for multiple I2C buses).
25797 Testing was performed on a 533MHz board.
25799 /*** Note: This patch replaces ticket DNX#2006083042000027 ***/
25801 Signed-off-by: Ben Warren <bwarren@qstreams.com>
25804 Implemented driver-level code to support two I2C buses on the
25805 MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds
25806 are 50kHz, 100kHz and 400kHz on each bus.
25811 commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae
25812 Author: Ben Warren <bwarren@qstreams.com>
25813 Date: Thu Sep 7 16:50:54 2006 -0400
25815 Add support for multiple I2C buses
25819 Attached is a patch providing support for multiple I2C buses at the
25820 command level. The second part of the patch includes an implementation
25821 for the MPC834x CPU and MPC8349EMDS board.
25823 /*** Note: This patch replaces ticket DNX#2006083042000018 ***/
25825 Signed-off-by: Ben Warren <bwarren@qstreams.com>
25829 1. Include new 'i2c' command (based on USB implementation) using
25830 CONFIG_I2C_CMD_TREE.
25832 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that
25833 the commands to change bus number and speed are only available under the
25834 new 'i2c' command mentioned in the first bullet.
25836 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus
25837 systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form
25838 of an array of bus-device pairs. Otherwise, it is an array of uchar.
25841 Added new 'i2c' master command for all I2C interaction. This is
25842 conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for
25843 setting I2C bus speed as well as changing the active bus if the board
25844 has more than one (conditionally compiled with
25845 CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses.
25851 commit bed85caf872714ebf53013967a695c9d63acfc68
25852 Author: Timur Tabi <timur@freescale.com>
25853 Date: Tue Oct 31 18:13:36 2006 -0600
25855 mpc83xx: Add support for Errata DDR6 on MPC 834x systems
25859 * Errata DDR6, which affects all current MPC 834x processors, lists changes
25860 required to maintain compatibility with various types of DDR memory. This
25861 patch implements those changes.
25863 Signed-off-by: Timur Tabi <timur@freescale.com>
25865 commit afd6e470f639883002c7c59d562690a5cb0f4865
25866 Author: Timur Tabi <timur@freescale.com>
25867 Date: Wed Oct 25 18:45:23 2006 -0500
25869 mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it
25871 commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a
25872 Author: Timur Tabi <timur@freescale.com>
25873 Date: Tue Aug 22 17:07:00 2006 -0500
25875 mpc83xx: Add support for variable flash memory sizes on 83xx systems
25879 * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access
25880 window registers, instead of using a hard-coded value of 8MB.
25882 Signed-off-by: Timur Tabi <timur@freescale.com>
25884 commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965
25885 Author: Tanya Jiang <tanya.jiang@freescale.com>
25886 Date: Thu Aug 3 18:38:13 2006 +0800
25888 mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros
25890 Unified TQM834x variable names with 83xx and consolidated macro
25891 in preparation for the 8360 and other upcoming 83xx devices.
25893 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
25895 commit f6eda7f80ccc13d658020268c507d7173cf2e8aa
25896 Author: Dave Liu <daveliu@freescale.com>
25897 Date: Wed Oct 25 14:41:21 2006 -0500
25899 mpc83xx: Changed to unified mpx83xx names and added common 83xx changes
25901 Incorporated the common unified variable names and the changes in preparation
25902 for releasing mpc8360 patches.
25904 Signed-off-by: Dave Liu <daveliu@freescale.com>
25906 commit 3894c46c27c64891f93ac04edde86a9fa9758d92
25907 Author: Tanya Jiang <tanya.jiang@freescale.com>
25908 Date: Thu Aug 3 18:36:02 2006 +0800
25910 mpc83xx: Fix missing build for mpc8349emds pci.c
25912 Make pci build for mpc8349emds
25914 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
25916 commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219
25917 Author: Tanya Jiang <tanya.jiang@freescale.com>
25918 Date: Thu Aug 3 18:39:49 2006 +0800
25920 mpc83xx: Removed unused file resetvec.S for mpc83xx cpu
25922 Removed unused file resetvec.S for mpc83xx cpu
25924 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
25926 commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf
25927 Author: Nick Spence <Nick.Spence@freescale.com>
25928 Date: Sat Sep 30 00:32:59 2006 -0700
25930 NAND Flash verify across block boundaries
25932 This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is
25934 and the write crosses a block boundary. The pointer to the verification
25935 buffer (bufstart) is not being updated to reflect the starting of the
25937 block so the verification of the second block fails.
25941 * Fix NAND FLASH page verification across block boundaries
25943 commit f484dc791a3932537213c43c654cc1295c64b84c
25944 Author: Nick Spence <nick.spence@freescale.com>
25945 Date: Thu Sep 7 07:39:46 2006 -0700
25947 Added RGMII support to the TSECs and Marvell 881111 Phy
25949 Added a phy initialization to adjust the RGMII RX and TX timing
25950 Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode
25952 Signed-off-by: Nick Spence <nick.spence@freescale.com>
25954 commit 4831c8b8a97799da77923d6bbb4c260c0d45521c
25955 Author: roy zang <tie-fei.zang@freescale.com>
25956 Date: Fri Nov 3 13:10:00 2006 +0800
25958 Remove some unused CFG define.
25959 undef CFG_DRAM_TEST
25961 commit 99c09c4dec34f77c243bf51bea532e3f339410ad
25962 Author: roy zang <tie-fei.zang@freescale.com>
25963 Date: Fri Nov 3 13:07:36 2006 +0800
25965 Change the TEXT_BASE from 0xFFF00000 to 0xFF000000.
25966 Both work. 0xFF000000 seems more reasonable.
25968 commit c59200443072353044aa4bf737a5a60f9a9af231
25969 Author: Wolfgang Denk <wd@pollux.denx.de>
25970 Date: Thu Nov 2 15:15:01 2006 +0100
25972 Release U-Boot 1.1.6
25974 commit c1fbe4103a0d6c8957f912af902d705ba67836f2
25975 Author: roy zang <tie-fei.zang@freescale.com>
25976 Date: Thu Nov 2 19:14:48 2006 +0800
25978 This patch comes from Yuli's posted patch on 8/8/2006
25979 titled "CFI Driver Little-Endian write Issue".
25981 http://sourceforge.net/mailarchive/message.php?msg_id=36311999
25983 If that patch applied, please discard this one.
25984 Until now , I do not see his patch is applied. So please apply this one.
25986 Signed-off-by: Yuli Barcohen <yuli@arabellasw.com>
25987 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
25989 commit b825f158e449e1e9cf74c08e572955e122394c96
25990 Author: roy zang <tie-fei.zang@freescale.com>
25991 Date: Thu Nov 2 19:12:31 2006 +0800
25993 Tsi108 on chip i2c support.
25995 The i2c Interface provides a master-only, serial interface that can be
25996 used for initializing Tsi108/Tsi109 registers from an EEPROM after a
25999 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
26000 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
26002 commit 9226e7d6f09b9a1ac074cd918c81225a4689bba8
26003 Author: roy zang <tie-fei.zang@freescale.com>
26004 Date: Thu Nov 2 19:11:06 2006 +0800
26006 Tsi108 on chip pci controller support.
26008 If there is no pci card, the tsi108/109 pci configure read will
26009 cause a machine check exception to the processor. PCI error should
26010 also be cleared after the read.
26012 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
26013 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
26015 commit d1927cee977126e547ceeba23e4f978f377cfb8f
26016 Author: roy zang <tie-fei.zang@freescale.com>
26017 Date: Thu Nov 2 19:08:55 2006 +0800
26019 Tundra tsi108 on chip Ethernet controller support.
26021 The following is a brief description of the Ethernet controller:
26022 The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent
26023 Gigabit Ethernet ports,E0 and E1. It uses a single Management interface
26024 to manage the two physical connection devices (PHYs). Each Ethernet port
26025 has its own statistics monitor that tracks and reports key interface
26026 statistics. Each port supports a 256-entry hash table for address
26027 filtering. In addition, each port is bridged to the Switch Fabric
26028 through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO.
26030 Each Ethernet port also has a pair of internal Ethernet DMA channels to
26031 support the transmit and receive data flows. The Ethernet DMA channels
26032 use descriptors set up in memory, the memory map of the device, and
26033 access via the Switch Fabric. The Ethernet Controller?s DMA arbiter
26034 handles arbitration for the Switch Fabric. The Controller also
26035 has a register businterface for register accesses and status monitor
26038 The PMD (Physical Media Device) interface operates in MII, GMII, or TBI
26039 modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs.
26040 The GMII and TBI modes are used to connect with Gigabit PMDs. Internal
26041 data flows to and from the Ethernet Controller through the Switch Fabric.
26043 Each Ethernet port uses its transmit and receive DMA channels to manage
26044 data flows through buffer descriptors that are predefined by the
26045 system (the descriptors can exist anywhere in the system memory map).
26046 These descriptors are data structures that point to buffers filled
26047 with data ready to transmit over Ethernet, or they point to empty
26048 buffers ready to receive data from Ethernet.
26050 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
26051 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
26053 commit 78aa0c3427f3ecdeb34aabfbbe2dd23b6ad8f40e
26054 Author: roy zang <tie-fei.zang@freescale.com>
26055 Date: Thu Nov 2 19:01:33 2006 +0800
26057 Tundra tsi108 header file.
26059 The Tundra Semiconductor Corporation (Tundra) Tsi108 is a host bridge for
26060 PowerPC processors that offers numerous system interconnect options for
26061 embedded application designers. The Tsi108 can interconnect 60x or
26062 MPX processors to PCI/X peripherals, DDR2-400 memory, Gigabit Ethernet,
26063 and Flash. Provided the macro define for tsi108 chip.
26065 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
26066 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
26068 commit 87c4db09699c6b89176b31004afcb83eb1585d47
26069 Author: roy zang <tie-fei.zang@freescale.com>
26070 Date: Thu Nov 2 18:59:15 2006 +0800
26072 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
26073 mpc7448hpc2 board support high level code:tsi108 init + mpc7448hpc2.
26075 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
26076 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
26078 commit 27801b8ab11c61b577e45742a515bb3b23b80241
26079 Author: roy zang <tie-fei.zang@freescale.com>
26080 Date: Thu Nov 2 18:57:21 2006 +0800
26082 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
26083 Make ,config.mk and link file for the mpc7448hpc2 board.
26085 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
26086 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
26088 commit c6411c0c3bbc79f9ba8aef58296a42d8f9d8a0a6
26089 Author: roy zang <tie-fei.zang@freescale.com>
26090 Date: Thu Nov 2 18:55:04 2006 +0800
26092 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
26093 The mpc7448hpc2 board support header file.
26095 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
26096 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
26098 commit 625bb5ddb50b243f931262ca8c46956409471917
26099 Author: roy zang <tie-fei.zang@freescale.com>
26100 Date: Thu Nov 2 18:52:21 2006 +0800
26102 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
26103 The mpc7448hpc2 board support low level assemble language init code.
26105 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
26106 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
26108 commit 4c52783b3d024e153c4972b97332e314bc3bdc46
26109 Author: roy zang <tie-fei.zang@freescale.com>
26110 Date: Thu Nov 2 18:49:51 2006 +0800
26112 General code modification for mpc7448hpc2 board support.
26113 1. Add 7447A and 7448 processor support.
26114 2. Add the following flags.
26116 CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
26117 (such as by switch on board), this flag should be set.
26119 CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
26120 relocates to RAM, this flag should be set.
26122 CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
26123 system hang in exception, this flag should be set.
26125 There is a design issue for tsi108/109 pci configure read. When pci scan
26126 the slots, if there is no pci card, the tsi108/9 will cause a machine
26127 check exception for mpc7448 processor.
26129 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
26130 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
26132 commit 69366bf42f22d67efce8da3f8c40a43d4a3c2695
26133 Author: roy zang <tie-fei.zang@freescale.com>
26134 Date: Thu Nov 2 18:34:47 2006 +0800
26136 Add README file for mpc7448hpc2 board.
26137 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
26139 commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
26140 Author: Bartlomiej Sieka <tur@semihalf.com>
26141 Date: Wed Nov 1 02:04:38 2006 +0100
26143 Finish up support for MarelV38B board
26144 - add watchdog support
26145 - enable GPIO_WKUP_7 pin for input
26148 commit ffa150bc90c943ca265170bd1be3f293674dd5c7
26149 Author: Bartlomiej Sieka <tur@semihalf.com>
26150 Date: Wed Nov 1 01:45:46 2006 +0100
26152 - Fix issues related to the use of ELDK 4 when compiling for MarelV38B:
26153 * remove warnings when compiling ethaddr.c
26154 * adjust linker script (fixes a crash resulting from incorrect
26155 definition of __u_boot_cmd_start)
26156 - Some MarelV38B code cleanup.
26158 commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385
26159 Author: Bartlomiej Sieka <tur@semihalf.com>
26160 Date: Wed Nov 1 01:38:16 2006 +0100
26162 - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the
26163 MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
26164 Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
26165 MPC5XXX_WU_GPIO_DATA_O for affected boards.
26167 - Add defintions for some MPC5XXX GPIO pins.
26169 commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8
26170 Author: Bartlomiej Sieka <tur@semihalf.com>
26171 Date: Wed Nov 1 01:34:29 2006 +0100
26173 Changed MarelV38B board make target to lowercase. Config file cleanup.
26175 commit 1954be6e9c9421b45d0a9d05b10356acc7563150
26176 Author: Wolfgang Denk <wd@pollux.denx.de>
26177 Date: Sun Oct 29 01:03:51 2006 +0200
26179 Automatically adjust ARFLAGS so "make -s" is really silent.
26181 commit fae684e89844856383bdf101440889557df3e6b1
26182 Author: Stefan Roese <sr@denx.de>
26183 Date: Sat Oct 28 16:45:00 2006 +0200
26185 [PATCH] omap925.c: Remove unused functions
26187 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
26188 Signed-off-by: Stefan Roese <sr@denx.de>
26190 commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776
26191 Author: Stefan Roese <sr@denx.de>
26192 Date: Sat Oct 28 17:12:58 2006 +0200
26194 [PATCH] Add some missing machtypes for netstar & voiceblue boards
26196 Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of
26199 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
26200 Signed-off-by: Stefan Roese <sr@denx.de>
26202 commit 856f054410cef52d868feb330168b2a4c4091328
26203 Author: Stefan Roese <sr@denx.de>
26204 Date: Sat Oct 28 15:55:52 2006 +0200
26206 [PATCH] NAND: Partition name support added to NAND subsystem
26208 chpart, nboot and NAND subsystem related commands now accept also partition
26209 name to specify offset.
26211 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
26212 Signed-off-by: Stefan Roese <sr@denx.de>
26214 commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6
26215 Author: Wolfgang Denk <wd@pollux.denx.de>
26216 Date: Sat Oct 28 02:29:44 2006 +0200
26220 commit 2751a95abd1b96911081c357e96a12fa97b40dee
26221 Author: Wolfgang Denk <wd@pollux.denx.de>
26222 Date: Sat Oct 28 02:29:14 2006 +0200
26224 Enable commandline editing and hush shell on all TQM boards.
26226 commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7
26227 Author: Wolfgang Denk <wd@pollux.denx.de>
26228 Date: Sat Oct 28 02:28:02 2006 +0200
26230 README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE
26232 commit 471a7be7a042e95e440f5de969c9765214ae8d6e
26233 Author: Wolfgang Denk <wd@denx.de>
26234 Date: Sat Oct 28 01:14:32 2006 +0200
26236 Check for illegal character '=' in environment variable names.
26238 Make sure the string passed as variable name does not contain a '='
26239 character. This not only prevents the common error or typing
26240 "setenv foo=bar" instead of "setenv foo bar", but (more importantly)
26241 also closes a backdoor which allowed to delete write-protected
26242 environment variables, for example by using "setenv ethaddr=".
26244 commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2
26245 Author: Wolfgang Denk <wd@pollux.denx.de>
26246 Date: Sat Oct 28 00:38:39 2006 +0200
26248 Minor code cleanup.
26250 commit e11887a77d81077416a2d1c5e0354916fee8c034
26251 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
26252 Date: Thu Oct 26 17:55:31 2006 +0200
26254 Don't pass any debug options directly to the assembler
26256 When passing the -g option to gcc, gcc automatically selects a
26257 suitable --g<format> option to pass on to the assembler.
26258 Thus, there's no point in forcing a specific debug option on the
26259 assembler using the -Wa mechanism.
26261 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
26263 commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393
26264 Author: Jon Loeliger <jdl@freescale.com>
26265 Date: Fri Oct 27 07:47:22 2006 -0500
26267 MPC86xx: Cleaned up unused and conditionally used local variables.
26269 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26271 commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9
26272 Author: Wolfgang Denk <wd@pollux.denx.de>
26273 Date: Fri Oct 27 11:55:21 2006 +0200
26275 Fix "ar" flags in some Makefiles to allow for silent "make -s"
26277 commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f
26278 Author: Ben Warren <bwarren@qstreams.com>
26279 Date: Thu Oct 26 14:38:25 2006 -0400
26281 Fix TSEC driver (now for real): avoid crashes if PHY is not attached
26282 to a TSEC (e.g. a switch is connected via RMII) or
26283 if the PHY is defective/incorrectly configured.
26285 Signed-off-by: Ben Warren <bwarren@qstreams.com>
26287 commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999
26288 Author: Ben Warren <bwarren@qstreams.com>
26289 Date: Thu Oct 26 14:38:25 2006 -0400
26291 Fix TSEC driver: avoid crashes if PHY is not attached
26292 to a TSEC (e.g. a switch is connected via RMII) or
26293 if the PHY is defective/incorrectly configured.
26295 Signed-off-by: Ben Warren <bwarren@qstreams.com>
26297 commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6
26298 Author: Wolfgang Denk <wd@pollux.denx.de>
26299 Date: Thu Oct 26 16:24:31 2006 +0200
26303 commit 5e3b0bc19f07ed277d85324ad0427642c8981baf
26304 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
26305 Date: Wed Oct 25 15:48:59 2006 +0200
26307 Finish up support for the ATSTK1000/ATSTK1002 boards
26309 Add atstk1002_config target to Makefile and move the AVR32 section
26310 down below Blackfin so that it doesn't end up in the middle of
26313 Drop the autogenerated linker script thing for now. Will have to
26314 revisit how to handle chips with different flash and RAM layout
26317 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
26319 commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4
26320 Author: Kumar Gala <galak@kernel.crashing.org>
26321 Date: Tue Oct 24 23:47:37 2006 -0500
26323 Added support for Multi-Image files that contain a device tree
26325 If a Multi-Image file contains a third image we try to use it as a
26326 device tree. The device tree image is assumed to be uncompressed in the
26327 image file. We automatically allocate space for the device tree in memory
26328 and provide an 8k pad to allow more than a reasonable amount of growth.
26330 Additionally, a device tree that was contained in flash will now automatically
26331 get copied to system memory as part of boot. Previously an error was
26332 reported if one tried to boot a device tree that was in flash.
26334 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
26336 commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512
26337 Author: Wolfgang Denk <wd@denx.de>
26338 Date: Tue Oct 24 21:35:55 2006 +0200
26340 Switch to automatically generated CHANGELOG file.
26341 (use "make CHANGELOG" to update it from time to time)
26343 commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6
26344 Author: Stefan Roese <sr@denx.de>
26345 Date: Tue Oct 24 18:06:48 2006 +0200
26347 Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c
26348 Patch by Stefan Roese, 24 Oct 2006
26350 commit 8ae3b713b2286e0c3213b7802062e4c1599010de
26351 Author: Wolfgang Denk <wd@pollux.denx.de>
26352 Date: Tue Oct 24 17:24:55 2006 +0200
26354 Merge with /home/wd/git/u-boot/master
26356 commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e
26357 Author: Wolfgang Denk <wd@pollux.denx.de>
26358 Date: Tue Oct 24 15:32:57 2006 +0200
26362 commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e
26363 Author: Wolfgang Denk <wd@pollux.denx.de>
26364 Date: Tue Oct 24 14:51:36 2006 +0200
26366 Move atstk1000 files into vendor specific directory.
26367 Patch by Haavard Skinnemoen, 12 Sep 2006
26369 commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37
26370 Author: Wolfgang Denk <wd@pollux.denx.de>
26371 Date: Tue Oct 24 14:42:37 2006 +0200
26373 Add ATSTK1000 and ATSTK1002 board support
26374 Patch by Haavard Skinnemoen, 06 Sep 2006
26376 This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
26379 ATSTK1000 is a full-featured development board for AT32AP CPUs. It
26380 has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
26381 and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
26382 CompactFlash cards. For more information, please see this page:
26384 http://www.atmel.com/dyn/products/tools.asp?family_id=682
26386 The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
26389 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
26391 commit f93ae788c3640fcde5db383471d45548ff4060d0
26392 Author: Wolfgang Denk <wd@pollux.denx.de>
26393 Date: Tue Oct 24 14:31:24 2006 +0200
26395 Add common serial driver for Atmel AT32 and AT91 chips
26396 Patch by Haavard Skinnemoen, 06 Sep 2006
26398 This is a first attempt at creating a common serial driver for Atmel
26399 chips. For now, it supports the AT32AP7000 AVR32 chip, but it should
26400 be possible to support AT91RM9200 and other ARM-based chips with some
26401 minor modifications.
26403 There's nothing fundamentally AVR32-specific in this driver, but it
26404 does use some features which are currently only defined for the
26406 * pm_get_clock_freq: Obtain the clock frequency of a given domain
26407 * gd->console_uart: A "struct device" containing information about
26408 register mappings, gpio resources and clocks associated with the
26411 For more information about these features, please see the "AT32AP
26414 commit 72a087e04705c26cad982879ebd06b5281bf825a
26415 Author: Wolfgang Denk <wd@pollux.denx.de>
26416 Date: Tue Oct 24 14:27:35 2006 +0200
26418 Add AT32AP CPU and AT32AP7000 SoC support
26419 Patch by Haavard Skinnemoen, 06 Sep 2006
26421 This patch adds support for the AT32AP CPU family and the AT32AP7000
26422 chip, which is the first chip implementing the AVR32 architecture.
26424 The AT32AP CPU core is a high-performance implementation featuring a
26425 7-stage pipeline, separate instruction- and data caches, and a MMU.
26426 For more information, please see the "AVR32 AP Technical Reference":
26428 http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
26430 In addition to this, the AT32AP7000 chip comes with a large set of
26431 integrated peripherals, many of which are shared with the AT91 series
26432 of ARM-based microcontrollers from Atmel. Full data sheet is
26435 http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
26437 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
26439 commit 7b64fef33c66be648826c0ff9758298ef13d0604
26440 Author: Wolfgang Denk <wd@pollux.denx.de>
26441 Date: Tue Oct 24 14:21:16 2006 +0200
26443 Add AVR32 architecture support
26444 Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200
26446 This patch adds common infrastructure code for the Atmel AVR32
26447 architecture. See doc/README.AVR32 for details.
26449 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
26451 commit 2da2d9a4766063b9848f3a35ad6025499cf87265
26452 Author: Wolfgang Denk <wd@pollux.denx.de>
26453 Date: Tue Oct 24 13:57:33 2006 +0200
26455 Use -g instead of -gstabs in AFLAGS_DEBUG
26456 Patch by Haavard Skinnemoen, 30 Aug 2006
26458 In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no
26459 matter what the target's preferred debugging format is. This patch
26460 simply replaces -gstabs with -g, so that the default debugging format
26461 for the architecture is used.
26463 commit 965829872169c2996023840d98e1d85ad148d629
26464 Author: Wolfgang Denk <wd@pollux.denx.de>
26465 Date: Tue Oct 24 13:55:18 2006 +0200
26467 Fix/workaround broken dependency handling with make 3.81
26468 Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200
26470 commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a
26471 Author: Marian Balakowicz <m8@semihalf.com>
26472 Date: Mon Oct 23 22:17:05 2006 +0200
26474 Fix sequoia separate object direcory building problems.
26476 commit 3dfa9cfdcee78b30da3432318b32821ffabe974b
26477 Author: Jon Loeliger <jdl@freescale.com>
26478 Date: Fri Oct 20 17:16:35 2006 -0500
26480 Use generic I2C register block on 85xx and 86xx.
26482 Replace private IMMAP I2C structures with generic reg block
26483 and allow 86xx to have multiple I2C device busses.
26485 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26487 commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c
26488 Author: Jon Loeliger <jdl@freescale.com>
26489 Date: Fri Oct 20 15:54:34 2006 -0500
26491 Fix compilation warnings on a few 85xx boards.
26493 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26495 commit 2047672684cf85cb6f96a1fbc993180aaaf19a99
26496 Author: Jon Loeliger <jdl@freescale.com>
26497 Date: Fri Oct 20 15:50:15 2006 -0500
26499 Converted all 85xx boards to use a common FSL I2C driver.
26500 Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
26501 And removed hard i2c path from a few u-boot.lds scipts too.
26502 Minor whitespace cleanups along the way.
26504 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26506 commit 4d45f69e362b05892c9e92a7907e5820995612aa
26507 Author: Jon Loeliger <jdl@freescale.com>
26508 Date: Thu Oct 19 12:02:24 2006 -0500
26510 Rewrite a series of goto statements as a sequences of
26511 conditional expressions instead.
26513 Use consistent return code 0/-1 for good/bad indicators.
26515 Include one fewer file if the driver isn't used at all.
26517 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26519 commit 7237c033b02fe295880435f1eb80819a0c987532
26520 Author: Jon Loeliger <jdl@freescale.com>
26521 Date: Thu Oct 19 11:02:16 2006 -0500
26523 Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c
26525 in an effort to begin to unify the umpteen FSL I2C drivers that
26526 are all otherwise very similar.
26528 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26530 commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b
26531 Author: Jon Loeliger <jdl@freescale.com>
26532 Date: Thu Oct 19 11:33:52 2006 -0500
26534 * Fix a bunch of compiler warnings for gcc 4.0
26536 Signed-off-by: Matthew McClintock <msm@freescale.com>
26538 commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2
26539 Author: Stefan Roese <sr@denx.de>
26540 Date: Tue Oct 17 06:14:31 2006 +0200
26542 Add monitor functions for indirect access to PPC440 DCR's
26543 Patch by Leonid Baryudin, 12 Oct 2006
26545 commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09
26546 Author: Jon Loeliger <jdl@freescale.com>
26547 Date: Fri Oct 13 16:47:53 2006 -0500
26549 Fixed leading whitespace issues.
26550 Removed spurious LAWAR thing.
26552 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26554 commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391
26555 Author: Jon Loeliger <jdl@freescale.com>
26556 Date: Thu Oct 12 10:42:36 2006 -0500
26558 Remove unneeded include files and local variable.
26560 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26562 commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5
26563 Author: Grant Likely <grant.likely@secretlab.ca>
26564 Date: Tue Oct 10 00:23:32 2006 -0600
26566 Fix possible uninitialized variable compiler warning.
26568 When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in
26569 do_bootm_linux() may be uninitialized. There is no possibility in the
26570 current code that len will get used uninitialized, but this fix follows
26571 the existing convention of setting both len and data to zero at the same
26574 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
26576 commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e
26577 Author: Matthew McClintock <msm@freescale.com>
26578 Date: Wed Oct 11 15:13:01 2006 -0500
26580 * Fix a bunch of compiler warnings for gcc 4.0
26582 Signed-off-by: Matthew McClintock <msm@freescale.com>
26584 commit bf651baa365e5447246aad6a633ccd667cf24a39
26585 Author: Jon Loeliger <jdl@freescale.com>
26586 Date: Wed Oct 11 10:10:43 2006 -0500
26588 Move "ar" flags to config.mk to allow for silent "make -s"
26590 commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e
26591 Author: Jon Loeliger <jdl@freescale.com>
26592 Date: Tue Oct 10 17:19:03 2006 -0500
26594 Coding style changes to remove local varible blocks
26595 and reformat a bit nicer.
26597 commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a
26598 Author: Jon Loeliger <jdl@freescale.com>
26599 Date: Tue Oct 10 17:16:04 2006 -0500
26601 Fix whitespace issues.
26603 commit 7b382b7125f2397cce63253df62f183e3dfa2770
26604 Author: Jon Loeliger <jdl@freescale.com>
26605 Date: Tue Oct 10 17:14:45 2006 -0500
26607 Fix whitespace issues.
26609 commit e10390ddd736b0dad1528eec4b0fe35c0827139a
26610 Author: Jon Loeliger <jdl@freescale.com>
26611 Date: Tue Oct 10 17:06:53 2006 -0500
26613 Fix whitespace issues.
26615 commit 89875e96ba3f023157bf50d5f8e33bf254964a76
26616 Author: Jon Loeliger <jdl@freescale.com>
26617 Date: Tue Oct 10 17:03:43 2006 -0500
26619 Ran lindent and cleaned up whitespace issues.
26620 Format for 80-columns too.
26622 commit 333961ae7095fc66d8a041fce1ac9ee873b09d86
26623 Author: Jon Loeliger <jdl@freescale.com>
26624 Date: Tue Oct 10 17:02:22 2006 -0500
26626 Fix whitespace and 80-col issues.
26628 commit 5c912cb1c31266c66ca59b36f9b6f87296421d75
26629 Author: Stefan Roese <sr@denx.de>
26630 Date: Sat Oct 7 11:36:51 2006 +0200
26632 CFG_NAND_QUIET_TEST added to not warn upon missing NAND device
26633 Patch by Stefan Roese, 07 Oct 2006
26635 commit 5bc528fa4da751d472397b308137238a6465afd2
26636 Author: Stefan Roese <sr@denx.de>
26637 Date: Sat Oct 7 11:35:25 2006 +0200
26639 Update ALPR code (NAND support working now)
26640 Patch by Stefan Roese, 07 Oct 2006
26642 commit 77d5034847d328753b80c46b83f960a14a26f40e
26643 Author: Stefan Roese <sr@denx.de>
26644 Date: Sat Oct 7 11:33:03 2006 +0200
26646 Remove compile warnings in fpga code
26647 Patch by Stefan Roese, 07 Oct 2006
26649 commit f3443867e90d2979a7dd1c65b0d537777e1f9850
26650 Author: Stefan Roese <sr@denx.de>
26651 Date: Sat Oct 7 11:30:52 2006 +0200
26653 Add CONFIG_BOARD_RESET to configure board specific reset function
26654 Patch by Stefan Roese, 07 Oct 2006
26656 commit f55df18187e7a45cb73fec4370d12135e6691ae1
26657 Author: John Traill <john.traill@freescale.com>
26658 Date: Fri Sep 29 08:23:12 2006 +0100
26660 Fix missing tCycle/modfreq calculation.
26662 Signed-off-by: John Traill <john.traill@freescale.com>
26664 commit 8272dc2f58f2473d8995fcc9b916440cfba080f0
26665 Author: Andy Fleming <afleming@freescale.com>
26666 Date: Wed Sep 13 10:33:35 2006 -0500
26668 Updated config headers to add default FDT-based booting
26670 commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3
26671 Author: Andy Fleming <afleming@freescale.com>
26672 Date: Wed Sep 13 10:34:18 2006 -0500
26674 Add support for eTSEC 3 & 4 on 8548 CDS
26676 * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
26677 This will only work on rev 1.3 boards (but doesn't break older boards)
26678 * Cleaned up some comments to reflect the expanded role of tsec
26681 commit 084d648b109c8984f83674043c1a7fa3885ef801
26682 Author: Andy Fleming <afleming@freescale.com>
26683 Date: Wed Sep 13 10:33:56 2006 -0500
26685 Added code to support 2.6.18 PCI changes in u-boot
26687 * Added code to swizzle the IRQ map for the PCI
26689 commit afbdc649f8751e4f4f1a6f527edfe139773f2c15
26690 Author: Jon Loeliger <jdl@freescale.com>
26691 Date: Tue Sep 19 09:34:10 2006 -0500
26693 Modified makefile for new build mechanism.
26695 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26697 commit d14ba6a798beb753e7a864500414fcc2d198b8bc
26698 Author: Jon Loeliger <jdl@freescale.com>
26699 Date: Thu Sep 14 08:40:36 2006 -0500
26701 Handle 86xx SVR values according to the new Reference Manual.
26702 Both 8641 and 8641D have SVR == 0x8090, and are distinguished
26703 by the byte in bits 16-23 instead.
26704 Thanks to Jason Jin for noticing.
26706 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26708 commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7
26709 Author: Zhang Wei <wei.zhang@freescale.com>
26710 Date: Mon Aug 28 14:25:31 2006 +0800
26712 Fixed an OF-tree off-by-one bug when adding a new property name.
26713 This bug will cause the kernel booting to pause a long time.
26715 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
26716 (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit)
26718 commit 9bff7a69a885adebbd2bd45990494ec4cf998a30
26719 Author: Jon Loeliger <jdl@freescale.com>
26720 Date: Tue Aug 29 11:05:09 2006 -0500
26722 Remove trailing empty lines.
26724 commit cd6d73d5b895a5935ac4fde0a356288142a584e0
26725 Author: Jon Loeliger <jdl@freescale.com>
26726 Date: Tue Aug 29 09:48:49 2006 -0500
26728 Remove bogus msync and use volatile asm.
26730 commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e
26731 Author: Jon Loeliger <jdl@freescale.com>
26732 Date: Tue Aug 29 08:17:14 2006 -0500
26734 Add myself as maintainer for MPC8641HPCN.
26736 commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d
26737 Author: Zhang Wei <wei.zhang@freescale.com>
26738 Date: Mon Aug 28 14:25:31 2006 +0800
26740 Fixed an OF-tree off-by-one bug when adding a new property name.
26741 This bug will cause the kernel booting to pause a long time.
26743 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
26745 commit 5567806b67d0ae83493aa8823ad3b6c914f581d7
26746 Author: Haiying Wang <haiying.wang@freescale.com>
26747 Date: Fri Aug 25 14:38:34 2006 -0400
26749 Change ramdiskaddr and dtbaddr
26750 Remove PEX fluff commands.
26752 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
26753 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26755 commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e
26756 Author: Matthew McClintock <msm@freescale.com>
26757 Date: Wed Aug 23 13:32:45 2006 -0500
26759 * Another small fix for booting with disable_of
26761 Signed-off-by: Matthew McClintock <msm@freescale.com>
26763 commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c
26764 Author: Jon Loeliger <jdl@freescale.com>
26765 Date: Wed Aug 23 11:04:43 2006 -0500
26767 Cleanup and lindent new AHCI driver.
26769 commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de
26770 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
26771 Date: Wed Aug 23 19:15:12 2006 +0800
26773 Add AHCI define and sata support for MPC8641HPCN board.
26775 Signed-off-by:Jason Jin<jason.jin@freescale.com>
26777 commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4
26778 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
26779 Date: Wed Aug 23 19:10:44 2006 +0800
26781 Add AHCI support to u-boot
26783 Add AHCI support in u-boot, enable the sata disk controllers which
26784 following the AHCI protocol.
26786 Signed-off-by:Jason Jin<jason.jin@freescale.com>
26788 commit d8ea2acf5f137cae99417df4f573d036ee384668
26789 Author: Zhang Wei <wei.zhang@freescale.com>
26790 Date: Wed Aug 23 17:54:32 2006 +0800
26792 Add dtb boot-up parameter to default boot commands.
26794 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
26796 commit b93775c2036b99baa390ea425c4771895bbc63c4
26797 Author: Jon Loeliger <jdl@freescale.com>
26798 Date: Tue Aug 22 18:26:08 2006 -0500
26800 Cleanup even more poorly introduced whitespace.
26802 commit ae6241685cbcf0c79a3636530d2ceab1fb291a94
26803 Author: Jon Loeliger <jdl@freescale.com>
26804 Date: Tue Aug 22 18:07:00 2006 -0500
26806 Cleanup more poorly introduced whitespace.
26808 commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57
26809 Author: Jon Loeliger <jdl@freescale.com>
26810 Date: Tue Aug 22 17:54:05 2006 -0500
26812 Cleanup poorly introduced whitespace.
26814 commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3
26815 Author: Jon Loeliger <jdl@freescale.com>
26816 Date: Tue Aug 22 12:25:27 2006 -0500
26818 General indent and whitespace cleanups.
26820 commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f
26821 Author: Jon Loeliger <jdl@freescale.com>
26822 Date: Tue Aug 22 12:06:18 2006 -0500
26824 General indent and whitespace cleanups.
26826 commit 41a0e8b304d3ff55fe27a230507aac79684016ac
26827 Author: Jon Loeliger <jdl@freescale.com>
26828 Date: Tue Aug 22 10:42:21 2006 -0500
26830 Cleanup compiler warnings.
26832 commit 5de62c47a8628b3da4d73f7c07027f32a3342d40
26833 Author: Matthew McClintock <msm@freescale.com>
26834 Date: Tue Aug 22 09:31:59 2006 -0500
26836 Fix disable_of booting
26838 Signed-off-by: Matthew McClintock <msm@freescale.com>
26840 commit 87a449c8ac396420cb24260f717ea9e6faa82047
26841 Author: Matthew McClintock <msm@freescale.com>
26842 Date: Tue Aug 22 09:23:55 2006 -0500
26844 Support for FDT in uImage format, error when using FDT from flash
26846 Signed-off-by: Matthew McClintock <msm@freescale.com>
26848 commit 75c299c38369d01addd5e054b8a16217b70f4a86
26849 Author: Haiying Wang <haiying.wang@freescale.com>
26850 Date: Tue Aug 15 15:12:55 2006 -0400
26852 Unlock cache before kernel starts up for MPC86xx
26854 commit 67256678f00c09b0a7f19e862e5c1847553d31bc
26855 Author: Haiying Wang <haiying.wang@freescale.com>
26856 Date: Tue Aug 15 15:13:15 2006 -0400
26858 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
26860 commit 1c8f6d8fb028f156094d05f2d14298e6479364ac
26861 Author: Haiying Wang <haiying.wang@freescale.com>
26862 Date: Tue Aug 15 15:12:55 2006 -0400
26864 Unlock cache before kernel starts up for MPC86xx
26866 commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04
26867 Author: Haiying Wang <haiying.wang@freescale.com>
26868 Date: Tue Aug 15 15:13:15 2006 -0400
26870 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
26872 commit 86c8e17f25e972a7e272950a0735fad84e082b88
26873 Author: Matthew McClintock <msm@freescale.com>
26874 Date: Wed Aug 16 13:59:47 2006 -0500
26876 * Fix disable_of booting
26878 Signed-off-by: Matthew McClintock <msm@freescale.com>
26880 commit 25c751e9adc86e22fe3b5b47cf2806379b575db7
26881 Author: Matthew McClintock <msm@freescale.com>
26882 Date: Wed Aug 16 10:54:09 2006 -0500
26884 * Support for FDT in uImage format, error when using FDT from flash
26886 Signed-off-by: Matthew McClintock <msm@freescale.com>
26888 commit 899620c2d66d4eef3b2a0034d062e71d45d886c9
26889 Author: Stefan Roese <sr@denx.de>
26890 Date: Tue Aug 15 14:22:35 2006 +0200
26892 Add initial support for the ALPR board from Prodrive
26893 NAND needs some additional testing
26894 Patch by Heiko Schocher, 15 Aug 2006
26896 commit f0ff4692ff3372dec55074a8eb444943ab095abb
26897 Author: Stefan Roese <sr@denx.de>
26898 Date: Tue Aug 15 14:15:51 2006 +0200
26900 Add FPGA Altera Cyclone 2 support
26901 Patch by Heiko Schocher, 15 Aug 2006
26903 commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b
26904 Author: Jon Loeliger <jdl@freescale.com>
26905 Date: Mon Aug 14 15:33:38 2006 -0500
26907 Fix BAT0 to actually be cacheable, non-guarded as documented.
26909 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26911 commit 40bc83559db5745681909fd7382ae509567e116d
26912 Author: Jon Loeliger <jdl@freescale.com>
26913 Date: Wed Aug 9 15:32:16 2006 -0500
26915 Removed MPC8641HPCN DTS source file from build.
26916 It is no longer linked into U-Boot; its sources are
26917 now located in the kernel tree.
26919 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26921 commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb
26922 Author: Matthew McClintock <msm@freescale.com>
26923 Date: Wed Jun 28 10:47:03 2006 -0500
26925 * Switched default PCI speed for 8540 ADS back to 33MHz
26927 * Added comments and a printf to warn that PCI-X won't
26929 Patch by Andy Fleming 17-Mar-2006
26931 Signed-off-by: Andy Fleming <afleming@freescale.com>
26933 commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39
26934 Author: Matthew McClintock <msm@freescale.com>
26935 Date: Wed Jun 28 10:46:35 2006 -0500
26937 * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006
26939 Signed-off-by: Andy Fleming <afleming@freescale.com>
26941 commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452
26942 Author: Matthew McClintock <msm@freescale.com>
26943 Date: Wed Jun 28 10:46:13 2006 -0500
26945 * Added VIA configuration table
26947 * Added support for PCI2 on CDS
26948 Patch by Andy Fleming 17-Mar-2006
26950 Signed-off-by: Andy Fleming <afleming@freescale.com>
26952 commit c88f9fe66b64247e5b6a38410ba315ca25596d16
26953 Author: Matthew McClintock <msm@freescale.com>
26954 Date: Wed Jun 28 10:45:41 2006 -0500
26956 * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006
26958 Signed-off-by: Andy Fleming <afleming@freescale.com>
26960 commit 97074ed9655309b64231bc2cee69fe85399f8055
26961 Author: Matthew McClintock <msm@freescale.com>
26962 Date: Wed Jun 28 10:45:17 2006 -0500
26964 * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006
26966 Signed-off-by: Andy Fleming <afleming@freescale.com>
26968 commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2
26969 Author: Matthew McClintock <msm@freescale.com>
26970 Date: Wed Jun 28 10:44:49 2006 -0500
26972 * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006
26974 Signed-off-by: Andy Fleming <afleming@freescale.com>
26976 commit a4e11558b810ef2cddffdf7b9d86bc1130441960
26977 Author: Matthew McClintock <msm@freescale.com>
26978 Date: Wed Jun 28 10:44:23 2006 -0500
26980 * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006
26982 Signed-off-by: Andy Fleming <afleming@freescale.com>
26984 commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b
26985 Author: Matthew McClintock <msm@freescale.com>
26986 Date: Wed Jun 28 10:43:36 2006 -0500
26988 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006
26990 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26992 commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4
26993 Author: Matthew McClintock <msm@freescale.com>
26994 Date: Wed Jun 28 10:43:00 2006 -0500
26996 * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006
26998 commit 5498d90312aad9f6bdbf047986027c35b03cd163
26999 Author: Matthew McClintock <msm@freescale.com>
27000 Date: Wed Jun 28 10:42:24 2006 -0500
27002 * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006
27004 commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe
27005 Author: Matthew McClintock <msm@freescale.com>
27006 Date: Wed Jun 28 10:41:37 2006 -0500
27008 * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006
27010 commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a
27011 Author: John Traill <john.traill@freescale.com>
27012 Date: Wed Aug 9 14:33:50 2006 +0100
27014 Add Rapidio support for the MPC8641HPCN
27016 Signed-off-by: John Traill <john.traill@freescale.com>
27018 commit 91a414c7d1fb0eac912592cd995b30c9f23045c9
27019 Author: John Traill <john.traill@freescale.com>
27020 Date: Tue Aug 8 11:32:43 2006 +0100
27022 Fix caslat calculation
27024 Signed-off-by: John Traill <john.traill@freescale.com>
27026 commit 709d3073e74153278e7904a70819bbef7df50e1a
27027 Author: Jon Loeliger <jdl@freescale.com>
27028 Date: Thu Aug 3 16:17:56 2006 -0500
27030 Convert to mac-address in ethernet nodes.
27032 commit 71748af833ca1017edf1415be376366ff2937d17
27033 Author: Haiying Wang <haiying.wang@freescale.com>
27034 Date: Fri Jul 28 12:41:35 2006 -0400
27036 Correct the irq value of DUART2
27038 commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c
27039 Author: Haiying Wang <haiying.wang@freescale.com>
27040 Date: Fri Jul 28 12:41:41 2006 -0400
27042 Change the space size of PEX IO in README
27044 commit 239db37c94f7a92941c4465feceb867c609241c5
27045 Author: Haiying Wang <haiying.wang@freescale.com>
27046 Date: Fri Jul 28 12:41:18 2006 -0400
27048 Move get_board_sys_clk to board directory
27050 commit 492900b985439fbce1a118afde1e35def870db03
27051 Author: John Traill <john.traill@freescale.com>
27052 Date: Fri Jul 28 09:03:54 2006 +0100
27054 Fix 8641HPCN pollution
27056 commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2
27057 Author: John Traill <john.traill@freescale.com>
27058 Date: Fri Jul 28 08:16:06 2006 +0100
27060 Fix 8641HPCN timebase
27062 commit c86360b830f1eecd7a72208575dde4f57879faea
27063 Author: Zhang Wei <wei.zhang@freescale.com>
27064 Date: Fri Jul 28 00:01:34 2006 +0800
27066 Fixed OF device tree of mpc86xxhpcn board.
27068 The changes works in with kernel irq mapping rework.
27070 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
27072 commit bea3f28d285942bf3f7ab339ce85178ded544225
27073 Author: Haiying Wang <haiying.wang@freescale.com>
27074 Date: Wed Jul 12 10:48:05 2006 -0400
27076 Add support for reading and writing mac addresses to or from ID EEPROM.
27078 Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
27079 With attached patch, we can use command "mac/mac read/mac save/"
27080 to read and write EEPROM under u-boot prompt.
27082 U-boot will calculate the checksum of EEPROM while bootup,
27083 if it is right, then u-boot will check whether the mac address
27084 of eTSEC0/1/2/3 is availalbe (non-zero).
27086 If there is mac address availabe in EEPROM, u-boot will use it,
27087 otherewise, u-boot will use the mac address defined in
27088 MPC8641HPCN.h. This matches the requirement to set unique mac address
27089 for each TSEC port.
27091 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
27092 Signed-off-by: York Sun <yorksun@freescale.com>
27094 commit fcb28e763415e0e4e66b0f45842d1557ae198e5e
27095 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
27096 Date: Thu Jul 13 10:35:10 2006 -0500
27098 Fixed initrd issue by define big RAM
27100 Signed-off-by:Jason Jin <Jason.jin@freescale.com>
27102 commit e6cd2a1785d74ec3d30a86f1cb360be8de478151
27103 Author: Jason Jin <Jason.jin@freescale.com>
27104 Date: Fri Jul 7 10:01:45 2006 -0500
27106 We made a u-boot patch to fix the hang up issue
27107 when booting filesystem from ramdisk.
27109 Signed-off-by:Jason Jin <Jason.jin@freescale.com>
27111 commit 38433ccc5850ee70549af0b2bc5b920355ef5388
27112 Author: Matthew McClintock <msm@freescale.com>
27113 Date: Wed Jun 28 10:47:03 2006 -0500
27115 * Switched default PCI speed for 8540 ADS back to 33MHz
27116 * Added comments and a printf to warn that PCI-X won't
27118 Patch by Andy Fleming 17-Mar-2006
27120 Signed-off-by: Andy Fleming <afleming@freescale.com>
27122 commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19
27123 Author: Matthew McClintock <msm@freescale.com>
27124 Date: Wed Jun 28 10:46:35 2006 -0500
27126 * Fixed a bug where 8555 PCI code used the old variable and
27128 Patch by Andy Fleming 17-Mar-2006
27130 Signed-off-by: Andy Fleming <afleming@freescale.com>
27132 commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac
27133 Author: Matthew McClintock <msm@freescale.com>
27134 Date: Wed Jun 28 10:46:13 2006 -0500
27136 * Added VIA configuration table
27137 * Added support for PCI2 on CDS
27138 Patch by Andy Fleming 17-Mar-2006
27140 Signed-off-by: Andy Fleming <afleming@freescale.com>
27142 commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc
27143 Author: Matthew McClintock <msm@freescale.com>
27144 Date: Wed Jun 28 10:45:41 2006 -0500
27146 * Fixed PCI memory definitions
27147 Patch by Andy Fleming 17-Mar-2006
27149 Signed-off-by: Andy Fleming <afleming@freescale.com>
27151 commit 087454609e47295443af793a282cddcd91a5f49c
27152 Author: Matthew McClintock <msm@freescale.com>
27153 Date: Wed Jun 28 10:45:17 2006 -0500
27155 * Added support for initializing second PCI bus on 85xx
27156 Patch by Andy Fleming 17-Mar-2006
27158 Signed-off-by: Andy Fleming <afleming@freescale.com>
27160 commit b636aaeb6fd516a442fb611bbeeddf3077a687fb
27161 Author: Matthew McClintock <msm@freescale.com>
27162 Date: Wed Jun 28 10:44:49 2006 -0500
27164 * Added PCI-X #defines for PCI-X initialization
27165 Patch by Andy Fleming on 17-Mar-2006
27167 Signed-off-by: Andy Fleming <afleming@freescale.com>
27169 commit 20abbc6fffa115690107cc942c7abf84bdc03a1b
27170 Author: Matthew McClintock <msm@freescale.com>
27171 Date: Wed Jun 28 10:44:23 2006 -0500
27173 * Made sure the code which disables prefetch for PCI devices
27174 sets the size of the prefetch region to 0
27175 Patch by Andy Fleming on 17-Mar-2006
27177 Signed-off-by: Andy Fleming <afleming@freescale.com>
27179 commit 40d5fa35d02df22580593bf0039ab173367e8ef0
27180 Author: Matthew McClintock <msm@freescale.com>
27181 Date: Wed Jun 28 10:43:36 2006 -0500
27183 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards
27184 Patch by Jon Loeliger 17-Jan-2006
27186 Signed-off-by: Jon Loeliger <jdl@freescale.com>
27188 commit be7e8b0cb5a0c49dc180075b96df296a893bf146
27189 Author: Matthew McClintock <msm@freescale.com>
27190 Date: Wed Jun 28 10:43:00 2006 -0500
27192 * Removed the oftree.dts for stxxtx in light of the changes
27193 to the flat device tree handling code
27194 Patch by Matthew McClintock 26-June-2006
27196 commit 1b380ec225665e73959677f3893dc658c5925e05
27197 Author: Matthew McClintock <msm@freescale.com>
27198 Date: Wed Jun 28 10:42:24 2006 -0500
27200 * Patch to modify ft_build.c to update flat device trees in place
27201 Patch by Matthew McClintock 26-June-2006
27203 commit 98a9c4d468a942a09ebe8979bec508017f3e4462
27204 Author: Matthew McClintock <msm@freescale.com>
27205 Date: Wed Jun 28 10:41:37 2006 -0500
27207 * Modify bootm command to support booting with flat device trees
27208 Patch by Matthew McClintock 26-June-2006
27210 commit da012ab661fd4ab169dd7b9b32201a4df62cf34a
27211 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
27212 Date: Wed Jun 28 08:43:56 2006 -0500
27214 Change Id to symbolic name for RTL8139
27216 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
27218 commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0
27219 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
27220 Date: Tue Jun 27 18:12:10 2006 +0800
27222 Fix RTL8139 in big endian
27224 signed-off-by: Jason Jin <Jason.Jin@freescale.com>
27225 signed-off-by: Wei Zhang <wei.zhang@freescale.com>
27227 commit fcfb9a57947fc203b99fe81ab0578f7286261f9f
27228 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
27229 Date: Tue Jun 27 18:12:23 2006 +0800
27231 Fix Tsec bug when no link
27233 When tftp a non-exist file from the tftp server, u-boot will check
27234 the link of all eth port. The original file will return wrong link
27235 state on the no link ports.
27237 signed-off-by: Jason Jin <Jason.Jin@freescale.com>
27239 commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2
27240 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
27241 Date: Tue Jun 27 18:12:02 2006 +0800
27243 Fix bug for io_bar size during pci scan
27245 During the pci scan process, Some devices return bar_reponse with the
27246 highest bytes 0, such as the pci bridge in uli1575 return bar_response
27247 with 0xffffff, So the bar_size should be manually set under 64K.
27249 Signed-off-by: Jason Jin <jason.jin@freescale.com>
27251 commit fa7db9c377bc2353a17bf1d381d65a6c418728f0
27252 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
27253 Date: Tue Jun 27 18:11:54 2006 +0800
27255 Enable PCIE1 for MPC8641HPCN board
27257 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
27259 commit 99d70e3a47affb9bae041a2caece7cd516e213b3
27260 Author: Wolfgang Denk <wd@pollux.denx.de>
27261 Date: Mon Jun 26 11:06:00 2006 +0200
27265 commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
27266 Author: Jon Loeliger <jdl@freescale.com>
27267 Date: Thu Jun 22 08:51:46 2006 -0500
27269 Fix bug in 8641hpcn reset command with no args.
27271 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
27272 Acked-by: Jon Loeliger <jdl@freescale.com>
27274 commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc
27275 Author: Zhang Wei <wei.zhang@freescale.com>
27276 Date: Tue Jun 20 17:47:15 2006 +0800
27278 Reworked IRQ mapping in OF-tree.
27280 commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c
27281 Author: Jon Loeliger <jdl@freescale.com>
27282 Date: Thu Jun 15 21:33:37 2006 -0500
27284 Do not enable address translation on secondary CPUs.
27285 Do not set up BATs on secondary CPUs. Let Linux do the nasty.
27287 Signed-off-by: Jon Loeliger <jdl@freescale.com>
27289 commit 386eda022473394ad8f36b86f2bdc9b4cb816291
27290 Author: Wolfgang Denk <wd@pollux.denx.de>
27291 Date: Wed Jun 14 18:14:56 2006 +0200
27295 commit 16c8d5e76ae0f78f39a60608574adfe0feb9cc70
27296 Author: Wolfgang Denk <wd@pollux.denx.de>
27297 Date: Wed Jun 14 17:45:53 2006 +0200
27299 Various USB related patches
27300 - Add support for mpc8xx USB device.
27301 - Add support for Common Device Class - Abstract Control Model USB console.
27302 - Add support for flow control in USB slave devices.
27303 - Add support for switching between gserial and cdc_acm using environment.
27304 - Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h
27305 - Update usbcore slightly to ease host enumeration.
27306 - Fix non-portable endian problems in usbdcore and usbdcore_ep0.
27307 - Add AdderUSB_config as a defconfig to enable usage of the USB console
27308 by default with the Adder87x U-Boot port.
27309 Patches by Bryan O'Donoghue <bodonoghue@codehermit.ie>, 29 May 2006
27311 commit 8ecc971618f56029ad99d3516f8b297a6ed58971
27312 Author: Jon Loeliger <jdl@jdl.com>
27313 Date: Wed Jun 7 10:53:55 2006 -0500
27315 Fix a get_board_sys_clk() use-before-def warning.
27317 Signed-off-by: Jon Loeliger <jdl@jdl.com>
27319 commit d9bf4858fca5aa4d651b283270f77da72ebadfd5
27320 Author: Jon Loeliger <jdl@jdl.com>
27321 Date: Wed Jun 7 10:52:49 2006 -0500
27323 Allow DTC path to be passed in.
27325 Signed-off-by: Jon Loeliger <jdl@jdl.com>
27327 commit c83ae9ea6d93abbe751bf8a3396236a084e56f87
27328 Author: Haiying Wang <haiying.wang@freescale.com>
27329 Date: Tue Jun 6 16:54:29 2006 -0400
27331 Modify the IRQ of DUART2
27333 commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e
27334 Author: Jon Loeliger <jdl@jdl.com>
27335 Date: Wed May 31 13:55:35 2006 -0500
27339 Signed-off-by: Jon Loeliger <jdl@freescale.com>
27341 commit cb5965fb95b77a49f4e6af95248e0c849f4af03e
27342 Author: Jon Loeliger <jdl@jdl.com>
27343 Date: Wed May 31 12:44:44 2006 -0500
27345 White space cleanup.
27346 Some 80-column cleanups.
27347 Convert printf() to puts() where possible.
27348 Use #include "spd_sdram.h" as needed.
27349 Enhanced reset command usage message a bit.
27351 Signed-off-by: Jon Loeliger <jdl@freescale.com>
27353 commit 3d5c5be547445dd3bd2eb7368d80df03ea437970
27354 Author: Jon Loeliger <jdl@jdl.com>
27355 Date: Wed May 31 11:39:34 2006 -0500
27357 Removed unneeded local_bus_init() from 8641HPCN board.
27359 Signed-off-by: Jon Loeliger <jdl@freescale.com>
27361 commit 4d3d729c16c392d2982d3266b659d333c927697d
27362 Author: Jon Loeliger <jdl@jdl.com>
27363 Date: Wed May 31 11:24:28 2006 -0500
27365 Moved mpc8641hpcn_board_reset() out of cpu/ into board/.
27367 Signed-off-by: Jon Loeliger <jdl@freescale.com>
27369 commit b2a941de060350ad15878d8219825f4950e9bb8e
27370 Author: Jon Loeliger <jdl@jdl.com>
27371 Date: Wed May 31 10:07:28 2006 -0500
27373 Remove dead debug code.
27375 Signed-off-by: Jon Loeliger <jdl@jdl.com>
27377 commit 126aa70f10ba3d20e0a6f4d32328250513b77770
27378 Author: Jon Loeliger <jdl@freescale.com>
27379 Date: Tue May 30 17:47:00 2006 -0500
27381 Move mpc86xx PIXIS code to board directory
27383 First cut at moving the PIXIS platform code out of
27384 the 86xx cpu directory and into board/mpc8641hpcn
27387 Signed-off-by: Jon Loeliger <jdl@freescale.com>
27389 commit ddf83a2fcef1a670c45fc585119dcc1fe062c4a9
27390 Author: Markus Klotzbuecher <mk@denx.de>
27391 Date: Tue May 30 16:56:14 2006 +0200
27393 Support generic OHCI support for the s3c24x0 cpu.
27395 commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
27396 Author: Haiying Wang <Haiying.Wang@freescale.com>
27397 Date: Tue May 30 09:10:32 2006 -0500
27399 Improve "reset" command's interaction with watchdog.
27401 "reset altbank" will reset another bank WITHOUT watch dog timer enabled
27402 "reset altbank wd" will reset another bank WITH watch dog enabled
27403 "diswd" will disable watch dog after u-boot boots up successfully
27405 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
27407 commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a
27408 Author: Haiying Wang <Haiying.Wang@freescale.com>
27409 Date: Tue May 30 08:51:19 2006 -0500
27411 Fix two SDRAM setup bugs.
27414 Enable 1T/2T based on number of DIMMs present.
27416 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
27418 commit d11fec5015334deb2010e36ce00bb118cc5429a5
27419 Author: Haiying Wang <Haiying.Wang@freescale.com>
27420 Date: Fri May 26 10:24:48 2006 -0500
27422 Add first draft of the MPC8641HPCN doc/README.
27424 Signed-off-by: Jon Loeliger <jdl@jdl.com>
27426 commit ed45d6c930b5939718a87ee12e25cf9a05978d4a
27427 Author: Haiying Wang <Haiying.Wang@freescale.com>
27428 Date: Fri May 26 10:13:04 2006 -0500
27430 Added pci@8000 block.
27431 Updated ethernet interrupt mappings (moved up 48).
27432 Cleaned up a few comments.
27434 Signed-off-by: Jon Loeliger <jdl@jdl.com>
27436 commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7
27437 Author: Haiying Wang <Haiying.Wang@freescale.com>
27438 Date: Fri May 26 10:01:16 2006 -0500
27440 Allow args on reset command.
27442 Signed-off-by: Jon Loeliger <jdl@jdl.com>
27444 commit 301f1aa384d0edcae6a22fd9adb933ad71695ecc
27445 Author: Markus Klotzbuecher <mk@denx.de>
27446 Date: Tue May 23 13:38:35 2006 +0200
27448 Changed the mp2usb (at91rm9200) board to use the generic OHCI driver. Some
27449 fixes to the latter.
27451 commit 24e37645e7378b20fa8f20e2996c8fb8e90c70c9
27452 Author: Markus Klotzbuecher <mk@denx.de>
27453 Date: Tue May 23 10:33:11 2006 +0200
27455 More cleanup for the delta board and the generic usb_ohci driver. Added
27456 CFG_USB_BOARD_INIT and CFG_USB_CPU_INIT for enabling board and cpu specific
27457 initialization and cleanup hooks respectively.
27459 commit 3e326ece9eba8184f5d48aa4fb87760a8f6f0f10
27460 Author: Markus Klotzbuecher <mk@denx.de>
27461 Date: Mon May 22 16:33:54 2006 +0200
27463 This patch adds USB storage support for the delta board. This is the first
27464 board to make use of a generic OHCI driver, that calls hooks for board
27465 dependant initialization.
27467 commit 14e37081ff3cac7ebe6e93836523429853b6b292
27468 Author: Jon Loeliger <jdl@jdl.com>
27469 Date: Fri May 19 13:28:39 2006 -0500
27471 Change arbitration to round-robin for SMP linux.
27473 commit 9a655876e5995be80f49054e2509500e871e4d3a
27474 Author: Jon Loeliger <jdl@jdl.com>
27475 Date: Fri May 19 13:26:34 2006 -0500
27477 Enable dual DDR controllers and interleaving.
27479 commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c
27480 Author: Jon Loeliger <jdl@jdl.com>
27481 Date: Fri May 19 13:22:44 2006 -0500
27483 Update 86xx address map and LAWBARs.
27485 commit cccce5d0581bb0ba4602799a4b5112e58d1579cb
27486 Author: Jon Loeliger <jdl@jdl.com>
27487 Date: Fri May 19 13:14:15 2006 -0500
27489 Remove L2 Cache invalidate polling.
27491 commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8
27492 Author: Jon Loeliger <jdl@jdl.com>
27493 Date: Fri May 19 12:33:09 2006 -0500
27495 Enable 2nd CPU and I2C.
27497 commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54
27498 Author: Jon Loeliger <jdl@freescale.com>
27499 Date: Mon May 15 07:26:56 2006 -0500
27501 Update interrupt mapping.
27503 commit 6cfea33477b04b63ed47386ed1629529484c33ba
27504 Author: Haiying Wang <Haiying.Wang@freescale.com>
27505 Date: Wed May 10 09:38:06 2006 -0500
27507 Remove unneeded INIT_RAM_LOCK cache twiddling.
27508 Correctly tracks r29 as global data pointer now.
27510 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
27512 commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c
27513 Author: Jon Loeliger <jdl@freescale.com>
27514 Date: Wed May 10 09:33:07 2006 -0500
27516 Remove unnecessary flash.c file.
27518 commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8
27519 Author: Jon Loeliger <jdl@freescale.com>
27520 Date: Tue May 9 08:23:49 2006 -0500
27522 Get MPC8641HPCN flash images working.
27524 Enable the CFI driver.
27525 Remove bogus LAWBAR7 cruft.
27526 Use correct TEXT_BASE, Fixup load script.
27527 Enable SPD EEPROM during DDR setup.
27528 Use generic RFC 1918 IP addresses by default.
27530 commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca
27531 Author: Jon Loeliger <jdl@freescale.com>
27532 Date: Thu Apr 27 10:15:16 2006 -0500
27534 Cleanup whitespaces and style issues.
27535 Removed //-style comments.
27536 Use 80-column lines.
27537 Remove trailing whitespace.
27538 Remove dead code and debug cruft.
27540 commit a2320a6bf8113a09544c42d160d10ac69d049a03
27541 Author: Jon Loeliger <jdl@freescale.com>
27542 Date: Thu Apr 27 08:22:39 2006 -0500
27544 Revert bad PCI prefetch limit change.
27546 commit debb7354d1ea4f694154818df5e5b523f5c1cc1d
27547 Author: Jon Loeliger <jdl@freescale.com>
27548 Date: Wed Apr 26 17:58:56 2006 -0500
27550 Initial support for MPC8641 HPCN board.