8 # To see a list of typical targets execute "make help"
9 # More info can be located in ./README
10 # Comments in this file are targeted only to the developer, do not
11 # expect to learn how to build the kernel reading this file.
13 # Do not use make's built-in rules and variables
14 # (this increases performance and avoids hard-to-debug behaviour);
17 # Avoid funny character set dependencies
21 export LC_COLLATE LC_NUMERIC
23 # Avoid interference with shell env settings
26 # We are using a recursive build, so we need to do a little thinking
27 # to get the ordering right.
29 # Most importantly: sub-Makefiles should only ever modify files in
30 # their own directory. If in some directory we have a dependency on
31 # a file in another dir (which doesn't happen often, but it's often
32 # unavoidable when linking the built-in.o targets which finally
33 # turn into vmlinux), we will call a sub make in that other dir, and
34 # after that we are sure that everything which is in that other dir
37 # The only cases where we need to modify files which have global
38 # effects are thus separated out and done before the recursive
39 # descending is started. They are now explicitly listed as the
43 # ---------------------------------------------------------------------------
45 # Normally, we echo the whole command before executing it. By making
46 # that echo $($(quiet)$(cmd)), we now have the possibility to set
47 # $(quiet) to choose other forms of output instead, e.g.
49 # quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
50 # cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
52 # If $(quiet) is empty, the whole command will be printed.
53 # If it is set to "quiet_", only the short version will be printed.
54 # If it is set to "silent_", nothing will be printed at all, since
55 # the variable $(silent_cmd_cc_o_c) doesn't exist.
57 # A simple variant is to prefix commands with $(Q) - that's useful
58 # for commands that shall be hidden in non-verbose mode.
62 # If KBUILD_VERBOSE equals 0 then the above command will be hidden.
63 # If KBUILD_VERBOSE equals 1 then the above command is displayed.
65 # To put more focus on warnings, be less verbose as default
66 # Use 'make V=1' to see the full commands
68 ifeq ("$(origin V)", "command line")
75 ifeq ($(KBUILD_VERBOSE
),1)
83 # If the user is running make -s (silent mode), suppress echoing of
86 ifneq ($(filter 4.
%,$(MAKE_VERSION
)),) # make-4
87 ifneq ($(filter %s
,$(firstword x
$(MAKEFLAGS
))),)
91 ifneq ($(filter s
% -s
%,$(MAKEFLAGS
)),)
96 export quiet Q KBUILD_VERBOSE
98 # kbuild supports saving output files in a separate directory.
99 # To locate output files in a separate directory two syntaxes are supported.
100 # In both cases the working directory must be the root of the kernel src.
102 # Use "make O=dir/to/store/output/files/"
104 # 2) Set KBUILD_OUTPUT
105 # Set the environment variable KBUILD_OUTPUT to point to the directory
106 # where the output files shall be placed.
107 # export KBUILD_OUTPUT=dir/to/store/output/files/
110 # The O= assignment takes precedence over the KBUILD_OUTPUT environment
113 # KBUILD_SRC is set on invocation of make in OBJ directory
114 # KBUILD_SRC is not intended to be used by the regular user (for now)
115 ifeq ($(KBUILD_SRC
),)
117 # OK, Make called in directory where kernel src resides
118 # Do we want to locate output files in a separate directory?
119 ifeq ("$(origin O)", "command line")
120 KBUILD_OUTPUT
:= $(O
)
123 # That's our default target when none is given on the command line
127 # Cancel implicit rules on top Makefile
128 $(CURDIR
)/Makefile Makefile
: ;
130 ifneq ($(KBUILD_OUTPUT
),)
131 # Invoke a second make in the output directory, passing relevant variables
132 # check that the output directory actually exists
133 saved-output
:= $(KBUILD_OUTPUT
)
134 KBUILD_OUTPUT
:= $(shell mkdir
-p
$(KBUILD_OUTPUT
) && cd
$(KBUILD_OUTPUT
) \
136 $(if
$(KBUILD_OUTPUT
),, \
137 $(error failed to create output directory
"$(saved-output)"))
139 PHONY
+= $(MAKECMDGOALS
) sub-make
141 $(filter-out _all sub-make
$(CURDIR
)/Makefile
, $(MAKECMDGOALS
)) _all
: sub-make
145 $(Q
)$(MAKE
) -C
$(KBUILD_OUTPUT
) KBUILD_SRC
=$(CURDIR
) \
146 -f
$(CURDIR
)/Makefile
$(filter-out _all sub-make
,$(MAKECMDGOALS
))
148 # Leave processing to above invocation of make
150 endif # ifneq ($(KBUILD_OUTPUT),)
151 endif # ifeq ($(KBUILD_SRC),)
153 # We process the rest of the Makefile if this is the final invocation of make
154 ifeq ($(skip-makefile
),)
156 # Do not print "Entering directory ...",
157 # but we want to display it when entering to the output directory
158 # so that IDEs/editors are able to understand relative filenames.
159 MAKEFLAGS
+= --no-print-directory
161 # Call a source code checker (by default, "sparse") as part of the
164 # Use 'make C=1' to enable checking of only re-compiled files.
165 # Use 'make C=2' to enable checking of *all* source files, regardless
166 # of whether they are re-compiled or not.
168 # See the file "Documentation/sparse.txt" for more details, including
169 # where to get the "sparse" utility.
171 ifeq ("$(origin C)", "command line")
172 KBUILD_CHECKSRC
= $(C
)
174 ifndef KBUILD_CHECKSRC
178 # Use make M=dir to specify directory of external module to build
179 # Old syntax make ... SUBDIRS=$PWD is still supported
180 # Setting the environment variable KBUILD_EXTMOD take precedence
182 KBUILD_EXTMOD ?
= $(SUBDIRS
)
185 ifeq ("$(origin M)", "command line")
186 KBUILD_EXTMOD
:= $(M
)
189 # If building an external module we do not care about the all: rule
190 # but instead _all depend on modules
192 ifeq ($(KBUILD_EXTMOD
),)
198 ifeq ($(KBUILD_SRC
),)
199 # building in the source tree
202 ifeq ($(KBUILD_SRC
)/,$(dir $(CURDIR
)))
203 # building in a subdirectory of the source tree
206 srctree
:= $(KBUILD_SRC
)
213 VPATH
:= $(srctree
)$(if
$(KBUILD_EXTMOD
),:$(KBUILD_EXTMOD
))
215 export srctree objtree VPATH
217 # Make sure CDPATH settings don't interfere
220 #########################################################################
222 HOSTARCH
:= $(shell uname
-m | \
224 -e s
/sun4u
/sparc64
/ \
227 -e s
/ppc64
/powerpc
/ \
229 -e s
/macppc
/powerpc
/\
232 HOSTOS
:= $(shell uname
-s | tr
'[:upper:]' '[:lower:]' | \
233 sed
-e
's/\(cygwin\).*/cygwin/')
235 export HOSTARCH HOSTOS
237 #########################################################################
239 # set default to nothing for native builds
240 ifeq ($(HOSTARCH
),$(ARCH
))
244 KCONFIG_CONFIG ?
= .config
245 export KCONFIG_CONFIG
247 # SHELL used by kbuild
248 CONFIG_SHELL
:= $(shell if
[ -x
"$$BASH" ]; then echo
$$BASH; \
249 else if
[ -x
/bin
/bash
]; then echo
/bin
/bash
; \
250 else echo sh
; fi
; fi
)
254 HOSTCFLAGS
= -Wall
-Wstrict-prototypes
-O2
-fomit-frame-pointer
257 ifeq ($(HOSTOS
),cygwin
)
261 # Mac OS X / Darwin's C preprocessor is Apple specific. It
262 # generates numerous errors and warnings. We want to bypass it
263 # and use GNU C's cpp. To do this we pass the -traditional-cpp
264 # option to the compiler. Note that the -traditional-cpp flag
265 # DOES NOT have the same semantics as GNU C's flag, all it does
266 # is invoke the GNU preprocessor in stock ANSI/ISO C fashion.
268 # Apple's linker is similar, thanks to the new 2 stage linking
269 # multiple symbol definitions are treated as errors, hence the
270 # -multiply_defined suppress option to turn off this error.
272 ifeq ($(HOSTOS
),darwin
)
273 # get major and minor product version (e.g. '10' and '6' for Snow Leopard)
274 DARWIN_MAJOR_VERSION
= $(shell sw_vers
-productVersion | cut
-f
1 -d
'.')
275 DARWIN_MINOR_VERSION
= $(shell sw_vers
-productVersion | cut
-f
2 -d
'.')
277 os_x_before
= $(shell if
[ $(DARWIN_MAJOR_VERSION
) -le
$(1) -a \
278 $(DARWIN_MINOR_VERSION
) -le
$(2) ] ; then echo
"$(3)"; else echo
"$(4)"; fi
;)
280 # Snow Leopards build environment has no longer restrictions as described above
281 HOSTCC
= $(call os_x_before
, 10, 5, "cc", "gcc")
282 HOSTCFLAGS
+= $(call os_x_before
, 10, 4, "-traditional-cpp")
283 HOSTLDFLAGS
+= $(call os_x_before
, 10, 5, "-multiply_defined suppress")
286 # Decide whether to build built-in, modular, or both.
287 # Normally, just do built-in.
292 # If we have only "make modules", don't compile built-in objects.
293 # When we're building modules with modversions, we need to consider
294 # the built-in objects during the descend as well, in order to
295 # make sure the checksums are up to date before we record them.
297 ifeq ($(MAKECMDGOALS
),modules
)
298 KBUILD_BUILTIN
:= $(if
$(CONFIG_MODVERSIONS
),1)
301 # If we have "make <whatever> modules", compile modules
302 # in addition to whatever we do anyway.
303 # Just "make" or "make all" shall build modules as well
305 # U-Boot does not need modules
306 #ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
307 # KBUILD_MODULES := 1
310 #ifeq ($(MAKECMDGOALS),)
311 # KBUILD_MODULES := 1
314 export KBUILD_MODULES KBUILD_BUILTIN
315 export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
317 # Look for make include files relative to root of kernel src
318 MAKEFLAGS
+= --include-dir
=$(srctree
)
320 # We need some generic definitions (do not try to remake the file).
321 $(srctree
)/scripts
/Kbuild.
include: ;
322 include $(srctree
)/scripts
/Kbuild.
include
324 # Make variables (CC, etc...)
326 AS
= $(CROSS_COMPILE
)as
328 ifneq ($(shell $(CROSS_COMPILE
)ld.bfd
-v
2> /dev
/null
),)
329 LD
= $(CROSS_COMPILE
)ld.bfd
331 LD
= $(CROSS_COMPILE
)ld
333 CC
= $(CROSS_COMPILE
)gcc
335 AR
= $(CROSS_COMPILE
)ar
336 NM
= $(CROSS_COMPILE
)nm
337 LDR
= $(CROSS_COMPILE
)ldr
338 STRIP
= $(CROSS_COMPILE
)strip
339 OBJCOPY
= $(CROSS_COMPILE
)objcopy
340 OBJDUMP
= $(CROSS_COMPILE
)objdump
347 CHECKFLAGS
:= -D__linux__
-Dlinux
-D__STDC__
-Dunix
-D__unix__ \
348 -Wbitwise
-Wno-return-void
-D__CHECK_ENDIAN__
$(CF
)
350 KBUILD_CPPFLAGS
:= -D__KERNEL__
-D__UBOOT__
352 KBUILD_CFLAGS
:= -Wall
-Wstrict-prototypes \
353 -Wno-format-security \
354 -fno-builtin
-ffreestanding
355 KBUILD_AFLAGS
:= -D__ASSEMBLY__
357 # Read UBOOTRELEASE from include/config/uboot.release (if it exists)
358 UBOOTRELEASE
= $(shell cat
include/config
/uboot.release
2> /dev
/null
)
359 UBOOTVERSION
= $(VERSION
)$(if
$(PATCHLEVEL
),.
$(PATCHLEVEL
)$(if
$(SUBLEVEL
),.
$(SUBLEVEL
)))$(EXTRAVERSION
)
361 export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION
362 export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR
363 export CONFIG_SHELL HOSTCC HOSTCFLAGS HOSTLDFLAGS CROSS_COMPILE AS LD CC
364 export CPP AR NM LDR STRIP OBJCOPY OBJDUMP
365 export MAKE AWK PERL PYTHON
366 export HOSTCXX HOSTCXXFLAGS DTC CHECK CHECKFLAGS
368 export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS LDFLAGS
369 export KBUILD_CFLAGS KBUILD_AFLAGS
371 # When compiling out-of-tree modules, put MODVERDIR in the module
372 # tree rather than in the kernel tree. The kernel tree might
374 export MODVERDIR
:= $(if
$(KBUILD_EXTMOD
),$(firstword $(KBUILD_EXTMOD
))/).tmp_versions
376 # Files to ignore in find ... statements
378 export RCS_FIND_IGNORE
:= \
( -name SCCS
-o
-name BitKeeper
-o
-name .svn
-o \
379 -name CVS
-o
-name .
pc -o
-name .hg
-o
-name .git \
) \
381 export RCS_TAR_IGNORE
:= --exclude SCCS
--exclude BitKeeper
--exclude .svn \
382 --exclude CVS
--exclude .
pc --exclude .hg
--exclude .git
384 # ===========================================================================
385 # Rules shared between *config targets and build targets
387 # Basic helpers built in scripts/
388 PHONY
+= scripts_basic
390 $(Q
)$(MAKE
) $(build
)=scripts
/basic
391 $(Q
)rm -f .tmp_quiet_recordmcount
393 # To avoid any implicit rule to kick in, define an empty command.
394 scripts
/basic
/%: scripts_basic
;
396 PHONY
+= outputmakefile
397 # outputmakefile generates a Makefile in the output directory, if using a
398 # separate output directory. This allows convenient use of make in the
401 ifneq ($(KBUILD_SRC
),)
402 $(Q
)ln
-fsn
$(srctree
) source
403 $(Q
)$(CONFIG_SHELL
) $(srctree
)/scripts
/mkmakefile \
404 $(srctree
) $(objtree
) $(VERSION
) $(PATCHLEVEL
)
407 # To make sure we do not include .config for any of the *config targets
408 # catch them early, and hand them over to scripts/kconfig/Makefile
409 # It is allowed to specify more targets when calling make, including
410 # mixing *config targets and build targets.
411 # For example 'make oldconfig all'.
412 # Detect when mixed targets is specified, and make a second invocation
413 # of make so .config is not included in this case either (for *config).
415 version_h
:= include/generated
/version_autogenerated.h
416 timestamp_h
:= include/generated
/timestamp_autogenerated.h
418 no-dot-config-targets
:= clean clobber mrproper
distclean \
419 help
%docs
check% coccicheck \
426 ifneq ($(filter $(no-dot-config-targets
), $(MAKECMDGOALS
)),)
427 ifeq ($(filter-out $(no-dot-config-targets
), $(MAKECMDGOALS
)),)
432 ifeq ($(KBUILD_EXTMOD
),)
433 ifneq ($(filter config
%config
,$(MAKECMDGOALS
)),)
435 ifneq ($(filter-out config
%config
,$(MAKECMDGOALS
)),)
441 ifeq ($(mixed-targets
),1)
442 # ===========================================================================
443 # We're called with mixed targets (*config and build targets).
444 # Handle them one by one.
446 PHONY
+= $(MAKECMDGOALS
) __build_one_by_one
448 $(filter-out __build_one_by_one
, $(MAKECMDGOALS
)): __build_one_by_one
453 for i in
$(MAKECMDGOALS
); do \
454 $(MAKE
) -f
$(srctree
)/Makefile
$$i; \
458 ifeq ($(config-targets
),1)
459 # ===========================================================================
460 # *config targets only - make sure prerequisites are updated, and descend
461 # in scripts/kconfig to make the *config target
463 KBUILD_DEFCONFIG
:= sandbox_defconfig
464 export KBUILD_DEFCONFIG KBUILD_KCONFIG
466 config
: scripts_basic outputmakefile FORCE
467 +$(Q
)$(CONFIG_SHELL
) $(srctree
)/scripts
/multiconfig.sh
$@
469 %config
: scripts_basic outputmakefile FORCE
470 +$(Q
)$(CONFIG_SHELL
) $(srctree
)/scripts
/multiconfig.sh
$@
473 # ===========================================================================
474 # Build targets only - this includes vmlinux, arch specific targets, clean
475 # targets and others. In general all targets except *config targets.
477 ifeq ($(dot-config
),1)
479 -include include/config
/auto.conf
481 # Read in dependencies to all Kconfig* files, make sure to run
482 # oldconfig if changes are detected.
483 -include include/config
/auto.conf.cmd
485 # To avoid any implicit rule to kick in, define an empty command
486 $(KCONFIG_CONFIG
) include/config
/auto.conf.cmd
: ;
488 # If .config is newer than include/config/auto.conf, someone tinkered
489 # with it and forgot to run make oldconfig.
490 # if auto.conf.cmd is missing then we are probably in a cleaned tree so
491 # we execute the config step to be sure to catch updated Kconfig files
492 include/config
/%.conf
: $(KCONFIG_CONFIG
) include/config
/auto.conf.cmd
493 $(Q
)$(MAKE
) -f
$(srctree
)/Makefile silentoldconfig
495 -include include/autoconf.mk
496 -include include/autoconf.mk.dep
498 # We want to include arch/$(ARCH)/config.mk only when include/config/auto.conf
499 # is up-to-date. When we switch to a different board configuration, old CONFIG
500 # macros are still remaining in include/config/auto.conf. Without the following
501 # gimmick, wrong config.mk would be included leading nasty warnings/errors.
502 autoconf_is_current
:= $(if
$(wildcard $(KCONFIG_CONFIG
)),$(shell find . \
503 -path .
/include/config
/auto.conf
-newer
$(KCONFIG_CONFIG
)))
504 ifneq ($(autoconf_is_current
),)
505 include $(srctree
)/config.mk
506 include $(srctree
)/arch
/$(ARCH
)/Makefile
509 # If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
510 # that (or fail if absent). Otherwise, search for a linker script in a
514 #LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug
515 ifdef CONFIG_SYS_LDSCRIPT
516 # need to strip off double quotes
517 LDSCRIPT
:= $(srctree
)/$(CONFIG_SYS_LDSCRIPT
:"%"=%)
521 # If there is no specified link script, we look in a number of places for it
523 ifeq ($(wildcard $(LDSCRIPT
)),)
524 LDSCRIPT
:= $(srctree
)/board
/$(BOARDDIR
)/u-boot.lds
526 ifeq ($(wildcard $(LDSCRIPT
)),)
527 LDSCRIPT
:= $(srctree
)/$(CPUDIR
)/u-boot.lds
529 ifeq ($(wildcard $(LDSCRIPT
)),)
530 LDSCRIPT
:= $(srctree
)/arch
/$(ARCH
)/cpu
/u-boot.lds
535 # Dummy target needed, because used as prerequisite
536 include/config
/auto.conf
: ;
537 endif # $(dot-config)
539 ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
546 KBUILD_CFLAGS
+= -DBUILD_TAG
='"$(BUILD_TAG)"'
549 KBUILD_CFLAGS
+= $(call cc-option
,-fno-stack-protector
)
552 # $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format>
553 # option to the assembler.
556 # Report stack usage if supported
557 ifeq ($(shell $(CONFIG_SHELL
) $(srctree
)/scripts
/gcc-stack-usage.sh
$(CC
)),y
)
558 KBUILD_CFLAGS
+= -fstack-usage
561 KBUILD_CFLAGS
+= $(call cc-option
,-Wno-format-nonliteral
)
563 # turn jbsr into jsr for m68k
565 ifeq ($(findstring 3.4,$(shell $(CC
) --version
)),3.4)
566 KBUILD_AFLAGS
+= -Wa
,-gstabs
,-S
570 # Prohibit date/time macros, which would make the build non-deterministic
571 KBUILD_CFLAGS
+= $(call cc-option
,-Werror
=date-time
)
573 ifneq ($(CONFIG_SYS_TEXT_BASE
),)
574 KBUILD_CPPFLAGS
+= -DCONFIG_SYS_TEXT_BASE
=$(CONFIG_SYS_TEXT_BASE
)
577 export CONFIG_SYS_TEXT_BASE
579 include $(srctree
)/scripts
/Makefile.extrawarn
581 # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
582 KBUILD_CPPFLAGS
+= $(KCPPFLAGS
)
583 KBUILD_AFLAGS
+= $(KAFLAGS
)
584 KBUILD_CFLAGS
+= $(KCFLAGS
)
586 # Use UBOOTINCLUDE when you must reference the include/ directory.
587 # Needed to be compatible with the O= option
590 $(if
$(KBUILD_SRC
), -I
$(srctree
)/include) \
591 -I
$(srctree
)/arch
/$(ARCH
)/include \
592 -include $(srctree
)/include/linux
/kconfig.h
594 NOSTDINC_FLAGS
+= -nostdinc
-isystem
$(shell $(CC
) -print-file-name
=include)
595 CHECKFLAGS
+= $(NOSTDINC_FLAGS
)
598 cpp_flags
:= $(KBUILD_CPPFLAGS
) $(PLATFORM_CPPFLAGS
) $(UBOOTINCLUDE
) \
600 c_flags
:= $(KBUILD_CFLAGS
) $(cpp_flags
)
602 #########################################################################
603 # U-Boot objects....order is important (i.e. start must be first)
605 HAVE_VENDOR_COMMON_LIB
= $(if
$(wildcard $(srctree
)/board
/$(VENDOR
)/common
/Makefile
),y
,n
)
608 libs-
$(HAVE_VENDOR_COMMON_LIB
) += board
/$(VENDOR
)/common
/
609 libs-
$(CONFIG_OF_EMBED
) += dts
/
614 libs-y
+= drivers
/dma
/
615 libs-y
+= drivers
/gpio
/
616 libs-y
+= drivers
/i2c
/
617 libs-y
+= drivers
/mmc
/
618 libs-y
+= drivers
/mtd
/
619 libs-
$(CONFIG_CMD_NAND
) += drivers
/mtd
/nand
/
620 libs-y
+= drivers
/mtd
/onenand
/
621 libs-
$(CONFIG_CMD_UBI
) += drivers
/mtd
/ubi
/
622 libs-y
+= drivers
/mtd
/spi
/
623 libs-y
+= drivers
/net
/
624 libs-y
+= drivers
/net
/phy
/
625 libs-y
+= drivers
/pci
/
626 libs-y
+= drivers
/power
/ \
627 drivers
/power
/fuel_gauge
/ \
629 drivers
/power
/pmic
/ \
630 drivers
/power
/battery
/
631 libs-y
+= drivers
/spi
/
632 libs-
$(CONFIG_FMAN_ENET
) += drivers
/net
/fm
/
633 libs-
$(CONFIG_SYS_FSL_DDR
) += drivers
/ddr
/fsl
/
634 libs-y
+= drivers
/serial
/
635 libs-y
+= drivers
/usb
/eth
/
636 libs-y
+= drivers
/usb
/gadget
/
637 libs-y
+= drivers
/usb
/host
/
638 libs-y
+= drivers
/usb
/musb
/
639 libs-y
+= drivers
/usb
/musb-new
/
640 libs-y
+= drivers
/usb
/phy
/
641 libs-y
+= drivers
/usb
/ulpi
/
643 libs-
$(CONFIG_API
) += api
/
644 libs-
$(CONFIG_HAS_POST
) += post
/
648 libs-y
+= $(if
$(BOARDDIR
),board
/$(BOARDDIR
)/)
650 libs-y
:= $(sort $(libs-y
))
652 u-boot-dirs
:= $(patsubst %/,%,$(filter %/, $(libs-y
))) tools examples
654 u-boot-alldirs
:= $(sort $(u-boot-dirs
) $(patsubst %/,%,$(filter %/, $(libs-
))))
656 libs-y
:= $(patsubst %/, %/built-in.o
, $(libs-y
))
658 u-boot-init
:= $(head-y
)
659 u-boot-main
:= $(libs-y
)
663 ifeq ($(CONFIG_USE_PRIVATE_LIBGCC
),y
)
664 PLATFORM_LIBGCC
= arch
/$(ARCH
)/lib
/lib.a
666 PLATFORM_LIBGCC
:= -L
$(shell dirname
`$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc
668 PLATFORM_LIBS
+= $(PLATFORM_LIBGCC
)
670 export PLATFORM_LIBGCC
672 # Special flags for CPP when processing the linker script.
673 # Pass the version down so we can handle backwards compatibility
676 -include $(srctree
)/include/u-boot
/u-boot.lds.h \
678 $(shell $(LD
) --version | \
679 sed
-ne
's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
681 #########################################################################
682 #########################################################################
684 ifneq ($(CONFIG_BOARD_SIZE_LIMIT
),)
686 @actual
=`wc -c $@ | awk '{print $$1}'`; \
687 limit
=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \
688 if
test $$actual -gt
$$limit; then \
689 echo
"$@ exceeds file size limit:" >&2 ; \
690 echo
" limit: $$limit bytes" >&2 ; \
691 echo
" actual: $$actual bytes" >&2 ; \
692 echo
" excess: $$((actual - limit)) bytes" >&2; \
699 # Statically apply RELA-style relocations (currently arm64 only)
700 ifneq ($(CONFIG_STATIC_RELA
),)
701 # $(1) is u-boot ELF, $(2) is u-boot bin, $(3) is text base
703 start
=$$($(NM
) $(1) | grep __rel_dyn_start | cut
-f
1 -d
' '); \
704 end
=$$($(NM
) $(1) | grep __rel_dyn_end | cut
-f
1 -d
' '); \
705 tools
/relocate-rela
$(2) $(3) $$start $$end
710 # Always append ALL so that arch config.mk's can add custom ones
711 ALL-y
+= u-boot.srec u-boot.bin System.map binary_size_check
713 ALL-
$(CONFIG_ONENAND_U_BOOT
) += u-boot-onenand.bin
714 ifeq ($(CONFIG_SPL_FSL_PBL
),y
)
715 ALL-
$(CONFIG_RAMBOOT_PBL
) += u-boot-with-spl-pbl.bin
717 ALL-
$(CONFIG_RAMBOOT_PBL
) += u-boot.pbl
719 ALL-
$(CONFIG_SPL
) += spl
/u-boot-spl.bin
720 ALL-
$(CONFIG_SPL_FRAMEWORK
) += u-boot.img
721 ALL-
$(CONFIG_TPL
) += tpl
/u-boot-tpl.bin
722 ALL-
$(CONFIG_OF_SEPARATE
) += u-boot.dtb u-boot-dtb.bin
723 ifeq ($(CONFIG_SPL_FRAMEWORK
),y
)
724 ALL-
$(CONFIG_OF_SEPARATE
) += u-boot-dtb.img
726 ALL-
$(CONFIG_OF_HOSTFILE
) += u-boot.dtb
727 ifneq ($(CONFIG_SPL_TARGET
),)
728 ALL-
$(CONFIG_SPL
) += $(CONFIG_SPL_TARGET
:"%"=%)
730 ALL-
$(CONFIG_REMAKE_ELF
) += u-boot.elf
732 # We can't do this yet due to the need for binary blobs
733 # ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
735 # enable combined SPL/u-boot/dtb rules for tegra
736 ifneq ($(CONFIG_TEGRA
),)
737 ifeq ($(CONFIG_SPL
),y
)
738 ifeq ($(CONFIG_OF_SEPARATE
),y
)
739 ALL-y
+= u-boot-dtb-tegra.bin
741 ALL-y
+= u-boot-nodtb-tegra.bin
746 # Add optional build target if defined in board/cpu/soc headers
747 ifneq ($(CONFIG_BUILD_TARGET
),)
748 ALL-y
+= $(CONFIG_BUILD_TARGET
:"%"=%)
751 LDFLAGS_u-boot
+= $(LDFLAGS_FINAL
)
752 ifneq ($(CONFIG_SYS_TEXT_BASE
),)
753 LDFLAGS_u-boot
+= -Ttext
$(CONFIG_SYS_TEXT_BASE
)
756 quiet_cmd_objcopy
= OBJCOPY
$@
757 cmd_objcopy
= $(OBJCOPY
) $(OBJCOPYFLAGS
) $(OBJCOPYFLAGS_
$(@F
)) $< $@
759 quiet_cmd_mkimage
= MKIMAGE
$@
760 cmd_mkimage
= $(objtree
)/tools
/mkimage
$(MKIMAGEFLAGS_
$(@F
)) -d
$< $@ \
761 $(if
$(KBUILD_VERBOSE
:1=), >/dev
/null
)
763 quiet_cmd_cat
= CAT
$@
764 cmd_cat
= cat
$(filter-out $(PHONY
), $^
) > $@
766 append
= cat
$(filter-out $< $(PHONY
), $^
) >> $@
768 quiet_cmd_pad_cat
= CAT
$@
769 cmd_pad_cat
= $(cmd_objcopy
) && $(append
) ||
rm -f
$@
772 ifneq ($(CONFIG_SYS_GENERIC_BOARD
),y
)
773 @echo
"===================== WARNING ======================"
774 @echo
"Please convert this board to generic board."
775 @echo
"Otherwise it will be removed by the end of 2014."
776 @echo
"See doc/README.generic-board for further information"
777 @echo
"===================================================="
781 dtbs dts
/dt.dtb
: checkdtc u-boot
782 $(Q
)$(MAKE
) $(build
)=dts dtbs
784 u-boot-dtb.bin
: u-boot.bin dts
/dt.dtb FORCE
785 $(call if_changed
,cat
)
788 $(Q
)$(MAKE
) $(build
)=arch
/arm
/imx-common
$@
790 quiet_cmd_copy
= COPY
$@
793 u-boot.dtb
: dts
/dt.dtb
796 OBJCOPYFLAGS_u-boot.hex
:= -O ihex
798 OBJCOPYFLAGS_u-boot.srec
:= -O srec
800 u-boot.hex u-boot.srec
: u-boot FORCE
801 $(call if_changed
,objcopy
)
803 OBJCOPYFLAGS_u-boot.bin
:= -O binary \
804 $(if
$(CONFIG_X86_RESET_VECTOR
),-R .start16
-R .resetvec
)
806 binary_size_check
: u-boot.bin FORCE
807 @file_size
=$(shell wc
-c u-boot.bin | awk
'{print $$1}') ; \
808 map_size
=$(shell cat u-boot.map | \
809 awk
'/_image_copy_start/ {start = $$1} /_image_binary_end/ {end = $$1} END {if (start != "" && end != "") print "ibase=16; " toupper(end) " - " toupper(start)}' \
812 if
[ "" != "$$map_size" ]; then \
813 if
test $$map_size -ne
$$file_size; then \
814 echo
"u-boot.map shows a binary size of $$map_size" >&2 ; \
815 echo
" but u-boot.bin shows $$file_size" >&2 ; \
820 u-boot.bin
: u-boot FORCE
821 $(call if_changed
,objcopy
)
822 $(call DO_STATIC_RELA
,$<,$@
,$(CONFIG_SYS_TEXT_BASE
))
827 $(LDR
) -T
$(CONFIG_CPU
) -c
$@
$< $(LDR_FLAGS
)
830 OBJCOPYFLAGS_u-boot.ldr.hex
:= -I binary
-O ihex
832 OBJCOPYFLAGS_u-boot.ldr.srec
:= -I binary
-O srec
834 u-boot.ldr.hex u-boot.ldr.srec
: u-boot.ldr FORCE
835 $(call if_changed
,objcopy
)
838 # U-Boot entry point, needed for booting of full-blown U-Boot
839 # from the SPL U-Boot version.
841 ifndef CONFIG_SYS_UBOOT_START
842 CONFIG_SYS_UBOOT_START
:= 0
845 MKIMAGEFLAGS_u-boot.img
= -A
$(ARCH
) -T firmware
-C none
-O u-boot \
846 -a
$(CONFIG_SYS_TEXT_BASE
) -e
$(CONFIG_SYS_UBOOT_START
) \
847 -n
"U-Boot $(UBOOTRELEASE) for $(BOARD) board"
849 MKIMAGEFLAGS_u-boot.kwb
= -n
$(srctree
)/$(CONFIG_SYS_KWD_CONFIG
:"%"=%) \
850 -T kwbimage
-a
$(CONFIG_SYS_TEXT_BASE
) -e
$(CONFIG_SYS_TEXT_BASE
)
852 MKIMAGEFLAGS_u-boot.pbl
= -n
$(srctree
)/$(CONFIG_SYS_FSL_PBL_RCW
:"%"=%) \
853 -R
$(srctree
)/$(CONFIG_SYS_FSL_PBL_PBI
:"%"=%) -T pblimage
855 u-boot.img u-boot.kwb u-boot.pbl
: u-boot.bin FORCE
856 $(call if_changed
,mkimage
)
858 MKIMAGEFLAGS_u-boot-dtb.img
= $(MKIMAGEFLAGS_u-boot.img
)
860 u-boot-dtb.img
: u-boot-dtb.bin FORCE
861 $(call if_changed
,mkimage
)
863 u-boot.sha1
: u-boot.bin
864 tools
/ubsha1 u-boot.bin
867 $(OBJDUMP
) -d
$< > $@
870 SPL_PAYLOAD
:= tpl
/u-boot-with-tpl.bin
872 SPL_PAYLOAD
:= u-boot.bin
875 OBJCOPYFLAGS_u-boot-with-spl.bin
= -I binary
-O binary \
876 --pad-to
=$(CONFIG_SPL_PAD_TO
)
877 u-boot-with-spl.bin
: spl
/u-boot-spl.bin
$(SPL_PAYLOAD
) FORCE
878 $(call if_changed
,pad_cat
)
880 OBJCOPYFLAGS_u-boot-with-tpl.bin
= -I binary
-O binary \
881 --pad-to
=$(CONFIG_TPL_PAD_TO
)
882 tpl
/u-boot-with-tpl.bin
: tpl
/u-boot-tpl.bin u-boot.bin FORCE
883 $(call if_changed
,pad_cat
)
885 SPL
: spl
/u-boot-spl.bin FORCE
886 $(Q
)$(MAKE
) $(build
)=arch
/arm
/imx-common
$@
888 u-boot-with-spl.imx u-boot-with-nand-spl.imx
: SPL u-boot.bin FORCE
889 $(Q
)$(MAKE
) $(build
)=arch
/arm
/imx-common
$@
891 MKIMAGEFLAGS_u-boot.ubl
= -n
$(UBL_CONFIG
) -T ublimage
-e
$(CONFIG_SYS_TEXT_BASE
)
893 u-boot.ubl
: u-boot-with-spl.bin FORCE
894 $(call if_changed
,mkimage
)
896 MKIMAGEFLAGS_u-boot-spl.ais
= -s
-n
$(if
$(CONFIG_AIS_CONFIG_FILE
), \
897 $(srctree
)/$(CONFIG_AIS_CONFIG_FILE
:"%"=%),"/dev/null") \
898 -T aisimage
-e
$(CONFIG_SPL_TEXT_BASE
)
899 spl
/u-boot-spl.ais
: spl
/u-boot-spl.bin FORCE
900 $(call if_changed
,mkimage
)
902 OBJCOPYFLAGS_u-boot.ais
= -I binary
-O binary
--pad-to
=$(CONFIG_SPL_PAD_TO
)
903 u-boot.ais
: spl
/u-boot-spl.ais u-boot.img FORCE
904 $(call if_changed
,pad_cat
)
906 u-boot-signed.sb
: u-boot.bin spl
/u-boot-spl.bin
907 $(Q
)$(MAKE
) $(build
)=arch
/arm
/cpu
/arm926ejs
/mxs u-boot-signed.sb
908 u-boot.sb
: u-boot.bin spl
/u-boot-spl.bin
909 $(Q
)$(MAKE
) $(build
)=arch
/arm
/cpu
/arm926ejs
/mxs u-boot.sb
911 # On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
912 # Both images are created using mkimage (crc etc), so that the ROM
913 # bootloader can check its integrity. Padding needs to be done to the
914 # SPL image (with mkimage header) and not the binary. Otherwise the resulting image
915 # which is loaded/copied by the ROM bootloader to SRAM doesn't fit.
916 # The resulting image containing both U-Boot images is called u-boot.spr
917 MKIMAGEFLAGS_u-boot-spl.img
= -A
$(ARCH
) -T firmware
-C none \
918 -a
$(CONFIG_SPL_TEXT_BASE
) -e
$(CONFIG_SPL_TEXT_BASE
) -n XLOADER
919 spl
/u-boot-spl.img
: spl
/u-boot-spl.bin FORCE
920 $(call if_changed
,mkimage
)
922 OBJCOPYFLAGS_u-boot.spr
= -I binary
-O binary
--pad-to
=$(CONFIG_SPL_PAD_TO
) \
924 u-boot.spr
: spl
/u-boot-spl.img u-boot.img FORCE
925 $(call if_changed
,pad_cat
)
927 MKIMAGEFLAGS_u-boot-spl.gph
= -A
$(ARCH
) -T gpimage
-C none \
928 -a
$(CONFIG_SPL_TEXT_BASE
) -e
$(CONFIG_SPL_TEXT_BASE
) -n SPL
929 spl
/u-boot-spl.gph
: spl
/u-boot-spl.bin FORCE
930 $(call if_changed
,mkimage
)
932 OBJCOPYFLAGS_u-boot-spi.gph
= -I binary
-O binary
--pad-to
=$(CONFIG_SPL_PAD_TO
) \
934 u-boot-spi.gph
: spl
/u-boot-spl.gph u-boot.img FORCE
935 $(call if_changed
,pad_cat
)
937 MKIMAGEFLAGS_u-boot-nand.gph
= -A
$(ARCH
) -T gpimage
-C none \
938 -a
$(CONFIG_SYS_TEXT_BASE
) -e
$(CONFIG_SYS_TEXT_BASE
) -n U-Boot
939 u-boot-nand.gph
: u-boot.bin FORCE
940 $(call if_changed
,mkimage
)
941 @dd if
=/dev
/zero bs
=8 count
=1 2>/dev
/null
>> $@
943 # x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including
944 # reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in
946 ifneq ($(CONFIG_X86_RESET_VECTOR
),)
947 rom
: u-boot.rom FORCE
949 IFDTOOL
=$(objtree
)/tools
/ifdtool
950 IFDTOOL_FLAGS
= -f
0:$(objtree
)/u-boot.dtb
951 IFDTOOL_FLAGS
+= -m
0x
$(shell $(NM
) u-boot |grep _dt_ucode_base_size |cut
-d
' ' -f1
)
952 IFDTOOL_FLAGS
+= -U
$(CONFIG_SYS_TEXT_BASE
):$(objtree
)/u-boot.bin
953 IFDTOOL_FLAGS
+= -w
$(CONFIG_SYS_X86_START16
):$(objtree
)/u-boot-x86-16bit.bin
955 ifneq ($(CONFIG_HAVE_INTEL_ME
),)
956 IFDTOOL_ME_FLAGS
= -D
$(srctree
)/board
/$(BOARDDIR
)/descriptor.bin
957 IFDTOOL_ME_FLAGS
+= -i ME
:$(srctree
)/board
/$(BOARDDIR
)/me.bin
960 ifneq ($(CONFIG_HAVE_MRC
),)
961 IFDTOOL_FLAGS
+= -w
$(CONFIG_X86_MRC_ADDR
):$(srctree
)/board
/$(BOARDDIR
)/mrc.bin
964 ifneq ($(CONFIG_HAVE_FSP
),)
965 IFDTOOL_FLAGS
+= -w
$(CONFIG_FSP_ADDR
):$(srctree
)/board
/$(BOARDDIR
)/$(CONFIG_FSP_FILE
)
968 ifneq ($(CONFIG_HAVE_CMC
),)
969 IFDTOOL_FLAGS
+= -w
$(CONFIG_CMC_ADDR
):$(srctree
)/board
/$(BOARDDIR
)/$(CONFIG_CMC_FILE
)
972 ifneq ($(CONFIG_X86_OPTION_ROM_ADDR
),)
973 IFDTOOL_FLAGS
+= -w
$(CONFIG_X86_OPTION_ROM_ADDR
):$(srctree
)/board
/$(BOARDDIR
)/$(CONFIG_X86_OPTION_ROM_FILE
)
976 quiet_cmd_ifdtool
= IFDTOOL
$@
977 cmd_ifdtool
= $(IFDTOOL
) -c
-r
$(CONFIG_ROM_SIZE
) u-boot.tmp
;
978 ifneq ($(CONFIG_HAVE_INTEL_ME
),)
979 cmd_ifdtool
+= $(IFDTOOL
) $(IFDTOOL_ME_FLAGS
) u-boot.tmp
;
981 cmd_ifdtool
+= $(IFDTOOL
) $(IFDTOOL_FLAGS
) u-boot.tmp
;
982 cmd_ifdtool
+= mv u-boot.tmp
$@
984 u-boot.rom
: u-boot-x86-16bit.bin u-boot-dtb.bin
985 $(call if_changed
,ifdtool
)
987 OBJCOPYFLAGS_u-boot-x86-16bit.bin
:= -O binary
-j .start16
-j .resetvec
988 u-boot-x86-16bit.bin
: u-boot FORCE
989 $(call if_changed
,objcopy
)
992 ifneq ($(CONFIG_SUNXI
),)
993 OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin
= -I binary
-O binary \
994 --pad-to
=$(CONFIG_SPL_PAD_TO
) --gap-fill
=0xff
995 u-boot-sunxi-with-spl.bin
: spl
/sunxi-spl.bin \
996 u-boot
$(if
$(CONFIG_OF_CONTROL
),-dtb
,).img FORCE
997 $(call if_changed
,pad_cat
)
1000 ifneq ($(CONFIG_TEGRA
),)
1001 OBJCOPYFLAGS_u-boot-nodtb-tegra.bin
= -O binary
--pad-to
=$(CONFIG_SYS_TEXT_BASE
)
1002 u-boot-nodtb-tegra.bin
: spl
/u-boot-spl u-boot.bin FORCE
1003 $(call if_changed
,pad_cat
)
1005 ifeq ($(CONFIG_OF_SEPARATE
),y
)
1006 u-boot-dtb-tegra.bin
: u-boot-nodtb-tegra.bin dts
/dt.dtb FORCE
1007 $(call if_changed
,cat
)
1011 u-boot-img.bin
: spl
/u-boot-spl.bin u-boot.img FORCE
1012 $(call if_changed
,cat
)
1014 #Add a target to create boot binary having SPL binary in PBI format
1015 #concatenated with u-boot binary. It is need by PowerPC SoC having
1016 #internal SRAM <= 512KB.
1017 MKIMAGEFLAGS_u-boot-spl.pbl
= -n
$(srctree
)/$(CONFIG_SYS_FSL_PBL_RCW
:"%"=%) \
1018 -R
$(srctree
)/$(CONFIG_SYS_FSL_PBL_PBI
:"%"=%) -T pblimage \
1019 -A
$(ARCH
) -a
$(CONFIG_SPL_TEXT_BASE
)
1021 spl
/u-boot-spl.pbl
: spl
/u-boot-spl.bin FORCE
1022 $(call if_changed
,mkimage
)
1025 UBOOT_BINLOAD
:= u-boot.img
1027 UBOOT_BINLOAD
:= u-boot.bin
1030 OBJCOPYFLAGS_u-boot-with-spl-pbl.bin
= -I binary
-O binary
--pad-to
=$(CONFIG_SPL_PAD_TO
) \
1033 u-boot-with-spl-pbl.bin
: spl
/u-boot-spl.pbl
$(UBOOT_BINLOAD
) FORCE
1034 $(call if_changed
,pad_cat
)
1036 # PPC4xx needs the SPL at the end of the image, since the reset vector
1037 # is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
1038 # and need to introduce a new build target with the full blown U-Boot
1039 # at the start padded up to the start of the SPL image. And then concat
1040 # the SPL image to the end.
1042 OBJCOPYFLAGS_u-boot-img-spl-at-end.bin
:= -I binary
-O binary \
1043 --pad-to
=$(CONFIG_UBOOT_PAD_TO
) --gap-fill
=0xff
1044 u-boot-img-spl-at-end.bin
: u-boot.img spl
/u-boot-spl.bin FORCE
1045 $(call if_changed
,pad_cat
)
1047 # Create a new ELF from a raw binary file. This is useful for arm64
1048 # where static relocation needs to be performed on the raw binary,
1049 # but certain simulators only accept an ELF file (but don't do the
1051 # FIXME refactor dts/Makefile to share target/arch detection
1052 u-boot.elf
: u-boot.bin
1053 @
$(OBJCOPY
) -B aarch64
-I binary
-O elf64-littleaarch64 \
1055 @
$(LD
) u-boot-elf.o
-o
$@ \
1056 --defsym
=_start
=$(CONFIG_SYS_TEXT_BASE
) \
1057 -Ttext
=$(CONFIG_SYS_TEXT_BASE
)
1059 # Rule to link u-boot
1060 # May be overridden by arch/$(ARCH)/config.mk
1061 quiet_cmd_u-boot__ ?
= LD
$@
1062 cmd_u-boot__ ?
= $(LD
) $(LDFLAGS
) $(LDFLAGS_u-boot
) -o
$@ \
1063 -T u-boot.lds
$(u-boot-init
) \
1064 --start-group
$(u-boot-main
) --end-group \
1065 $(PLATFORM_LIBS
) -Map u-boot.map
1067 quiet_cmd_smap
= GEN common
/system_map.o
1069 smap
=`$(call SYSTEM_MAP,u-boot) | \
1070 awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
1071 $(CC
) $(c_flags
) -DSYSTEM_MAP
="\"$${smap}\"" \
1072 -c
$(srctree
)/common
/system_map.c
-o common
/system_map.o
1074 u-boot
: $(u-boot-init
) $(u-boot-main
) u-boot.lds
1075 $(call if_changed
,u-boot__
)
1076 ifeq ($(CONFIG_KALLSYMS
),y
)
1078 $(call cmd
,u-boot__
) common
/system_map.o
1081 # The actual objects are generated when descending,
1082 # make sure no implicit rule kicks in
1083 $(sort $(u-boot-init
) $(u-boot-main
)): $(u-boot-dirs
) ;
1085 # Handle descending into subdirectories listed in $(vmlinux-dirs)
1086 # Preset locale variables to speed up the build process. Limit locale
1087 # tweaks to this spot to avoid wrong language settings when running
1088 # make menuconfig etc.
1089 # Error messages still appears in the original language
1091 PHONY
+= $(u-boot-dirs
)
1092 $(u-boot-dirs
): prepare scripts
1093 $(Q
)$(MAKE
) $(build
)=$@
1096 # The "tools" are needed early
1097 $(filter-out tools
, $(u-boot-dirs
)): tools
1098 # The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
1099 # is "yes"), so compile examples after U-Boot is compiled.
1100 examples
: $(filter-out examples
, $(u-boot-dirs
))
1102 define filechk_uboot.release
1103 echo
"$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1106 # Store (new) UBOOTRELEASE string in include/config/uboot.release
1107 include/config
/uboot.release
: include/config
/auto.conf FORCE
1108 $(call filechk
,uboot.release
)
1111 # Things we need to do before we recursively start building the kernel
1112 # or the modules are listed in "prepare".
1113 # A multi level approach is used. prepareN is processed before prepareN-1.
1114 # archprepare is used in arch Makefiles and when processed asm symlink,
1115 # version.h and scripts_basic is processed / created.
1117 # Listed in dependency order
1118 PHONY
+= prepare archprepare prepare0 prepare1 prepare2 prepare3
1120 # prepare3 is used to check if we are building in a separate output directory,
1122 # 1) Check that make has not been executed in the kernel src $(srctree)
1123 prepare3
: include/config
/uboot.release
1124 ifneq ($(KBUILD_SRC
),)
1125 @
$(kecho
) ' Using $(srctree) as source for U-Boot'
1126 $(Q
)if
[ -f
$(srctree
)/.config
-o
-d
$(srctree
)/include/config
]; then \
1127 echo
>&2 " $(srctree) is not clean, please run 'make mrproper'"; \
1128 echo
>&2 " in the '$(srctree)' directory.";\
1133 # prepare2 creates a makefile if using a separate output directory
1134 prepare2
: prepare3 outputmakefile
1136 prepare1
: prepare2
$(version_h
) $(timestamp_h
) \
1137 include/config
/auto.conf
1138 ifeq ($(__HAVE_ARCH_GENERIC_BOARD
),)
1139 ifeq ($(CONFIG_SYS_GENERIC_BOARD
),y
)
1140 @echo
>&2 " Your architecture does not support generic board."
1141 @echo
>&2 " Please undefine CONFIG_SYS_GENERIC_BOARD in your board config file."
1145 ifeq ($(wildcard $(LDSCRIPT
)),)
1146 @echo
>&2 " Could not find linker script."
1150 archprepare
: prepare1 scripts_basic
1152 prepare0
: archprepare FORCE
1153 $(Q
)$(MAKE
) $(build
)=.
1155 # All the preparing..
1158 # Generate some files
1159 # ---------------------------------------------------------------------------
1161 define filechk_version.h
1162 (echo \
#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \
1163 echo \
#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \
1164 echo \
#define CC_VERSION_STRING \"$$($(CC) --version | head -n 1)\"; \
1165 echo \
#define LD_VERSION_STRING \"$$($(LD) --version | head -n 1)\"; )
1168 define filechk_timestamp.h
1169 (LC_ALL
=C date
+'#define U_BOOT_DATE "%b %d %C%y"'; \
1170 LC_ALL
=C date
+'#define U_BOOT_TIME "%T"')
1173 $(version_h
): include/config
/uboot.release FORCE
1174 $(call filechk
,version.h
)
1176 $(timestamp_h
): $(srctree
)/Makefile FORCE
1177 $(call filechk
,timestamp.h
)
1179 # ---------------------------------------------------------------------------
1183 @echo
'*** Warning: make $@ is unnecessary now.'
1185 # ---------------------------------------------------------------------------
1186 quiet_cmd_cpp_lds
= LDS
$@
1187 cmd_cpp_lds
= $(CPP
) -Wp
,-MD
,$(depfile
) $(cpp_flags
) $(LDPPFLAGS
) -ansi \
1188 -D__ASSEMBLY__
-x assembler-with-cpp
-P
-o
$@
$<
1190 u-boot.lds
: $(LDSCRIPT
) prepare FORCE
1191 $(call if_changed_dep
,cpp_lds
)
1193 spl
/u-boot-spl.bin
: spl
/u-boot-spl
1195 spl
/u-boot-spl
: tools prepare
1196 $(Q
)$(MAKE
) obj
=spl
-f
$(srctree
)/scripts
/Makefile.spl
all
1198 spl
/sunxi-spl.bin
: spl
/u-boot-spl
1201 tpl
/u-boot-tpl.bin
: tools prepare
1202 $(Q
)$(MAKE
) obj
=tpl
-f
$(srctree
)/scripts
/Makefile.spl
all
1204 TAG_SUBDIRS
:= $(patsubst %,$(srctree
)/%,$(u-boot-dirs
) include)
1210 ctags
-w
-o ctags
`$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
1211 -name '*.[chS]' -print`
1214 etags
-a
-o etags
`$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
1215 -name '*.[chS]' -print`
1217 $(FIND
) $(FINDFLAGS
) $(TAG_SUBDIRS
) -name
'*.[chS]' -print > \
1223 grep
-v
'\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
1226 @
$(call SYSTEM_MAP
,$<) > $@
1229 @if
test $(call dtc-version
) -lt
0104; then \
1230 echo
'*** Your dtc is too old, please upgrade to dtc 1.4 or newer'; \
1234 #########################################################################
1236 # ARM relocations should all be R_ARM_RELATIVE (32-bit) or
1237 # R_AARCH64_RELATIVE (64-bit).
1238 checkarmreloc
: u-boot
1239 @RELOC
="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \
1240 grep R_A | sort -u`"; \
1241 if
test "$$RELOC" != "R_ARM_RELATIVE" -a \
1242 "$$RELOC" != "R_AARCH64_RELATIVE"; then \
1243 echo
"$< contains unexpected relocations: $$RELOC"; \
1248 $(Q
)$(MAKE
) $(build
)=tools
/$@
1250 tools-only
: scripts_basic
$(version_h
) $(timestamp_h
)
1251 $(Q
)$(MAKE
) $(build
)=tools
1253 tools-all
: export HOST_TOOLS_ALL
=y
1254 tools-all
: env tools
;
1256 cross_tools
: export CROSS_BUILD_TOOLS
=y
1257 cross_tools
: tools
;
1261 git log
--no-merges U-Boot-1_1_5.. | \
1262 unexpand
-a | sed
-e
's/\s\s*$$//' > $@
1264 include/license.h
: tools
/bin2header COPYING
1265 cat COPYING | gzip
-9 -c | .
/tools
/bin2header license_gzip
> include/license.h
1266 #########################################################################
1269 # Cleaning is done on three levels.
1270 # make clean Delete most generated files
1271 # Leave enough to build external modules
1272 # make mrproper Delete the current configuration, and all generated files
1273 # make distclean Remove editor backup files, patch leftover files and the like
1275 # Directories & files removed with 'make clean'
1276 CLEAN_DIRS
+= $(MODVERDIR
) \
1277 $(foreach d
, spl tpl
, $(patsubst %,$d/%, \
1278 $(filter-out include, $(shell ls
-1 $d 2>/dev
/null
))))
1280 CLEAN_FILES
+= include/bmp_logo.h
include/bmp_logo_data.h \
1281 u-boot
* MLO
* SPL System.map
1283 # Directories & files removed with 'make mrproper'
1284 MRPROPER_DIRS
+= include/config
include/generated spl tpl \
1286 MRPROPER_FILES
+= .config .config.old
include/autoconf.mk
* include/config.h \
1287 ctags etags TAGS cscope
* GPATH GTAGS GRTAGS GSYMS
1289 # clean - Delete most, but leave enough to build external modules
1291 clean: rm-dirs
:= $(CLEAN_DIRS
)
1292 clean: rm-files
:= $(CLEAN_FILES
)
1294 clean-dirs
:= $(foreach f
,$(u-boot-alldirs
),$(if
$(wildcard $(srctree
)/$f/Makefile
),$f))
1296 clean-dirs
:= $(addprefix _clean_
, $(clean-dirs
) doc
/DocBook
)
1298 PHONY
+= $(clean-dirs
) clean archclean
1300 $(Q
)$(MAKE
) $(clean)=$(patsubst _clean_
%,%,$@
)
1302 # TODO: Do not use *.cfgtmp
1303 clean: $(clean-dirs
)
1306 @find
$(if
$(KBUILD_EXTMOD
), $(KBUILD_EXTMOD
), .
) $(RCS_FIND_IGNORE
) \
1307 \
( -name
'*.[oas]' -o
-name
'*.ko' -o
-name
'.*.cmd' \
1308 -o
-name
'*.ko.*' -o
-name
'*.su' -o
-name
'*.cfgtmp' \
1309 -o
-name
'.*.d' -o
-name
'.*.tmp' -o
-name
'*.mod.c' \
1310 -o
-name
'*.symtypes' -o
-name
'modules.order' \
1311 -o
-name modules.builtin
-o
-name
'.tmp_*.o.*' \
1312 -o
-name
'*.gcno' \
) -type f
-print | xargs
rm -f
1314 # mrproper - Delete all generated files, including .config
1316 mrproper
: rm-dirs
:= $(wildcard $(MRPROPER_DIRS
))
1317 mrproper
: rm-files
:= $(wildcard $(MRPROPER_FILES
))
1318 mrproper-dirs
:= $(addprefix _mrproper_
,scripts
)
1320 PHONY
+= $(mrproper-dirs
) mrproper archmrproper
1322 $(Q
)$(MAKE
) $(clean)=$(patsubst _mrproper_
%,%,$@
)
1324 mrproper
: clean $(mrproper-dirs
)
1327 @
rm -f arch
/*/include/asm
/arch
1334 @find
$(srctree
) $(RCS_FIND_IGNORE
) \
1335 \
( -name
'*.orig' -o
-name
'*.rej' -o
-name
'*~' \
1336 -o
-name
'*.bak' -o
-name
'#*#' -o
-name
'.*.orig' \
1337 -o
-name
'.*.rej' -o
-name
'*%' -o
-name
'core' \
1338 -o
-name
'*.pyc' \
) \
1339 -type f
-print | xargs
rm -f
1343 F
=`basename $(srctree)` ; cd ..
; \
1344 gtar
--force-local
-zcvf
`LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
1347 @echo
'Cleaning targets:'
1348 @echo
' clean - Remove most generated files but keep the config'
1349 @echo
' mrproper - Remove all generated files + config + various backup files'
1350 @echo
' distclean - mrproper + remove editor backup and patch files'
1352 @echo
'Configuration targets:'
1353 @
$(MAKE
) -f
$(srctree
)/scripts
/kconfig
/Makefile help
1355 @echo
'Other generic targets:'
1356 @echo
' all - Build all necessary images depending on configuration'
1357 @echo
'* u-boot - Build the bare u-boot'
1358 @echo
' dir/ - Build all files in dir and below'
1359 @echo
' dir/file.[oisS] - Build specified target only'
1360 @echo
' dir/file.lst - Build specified mixed source/assembly target only'
1361 @echo
' (requires a recent binutils and recent build (System.map))'
1362 @echo
' tags/ctags - Generate ctags file for editors'
1363 @echo
' etags - Generate etags file for editors'
1364 @echo
' cscope - Generate cscope index'
1365 @echo
' ubootrelease - Output the release version string (use with make -s)'
1366 @echo
' ubootversion - Output the version stored in Makefile (use with make -s)'
1368 @echo
'Static analysers'
1369 @echo
' checkstack - Generate a list of stack hogs'
1371 @echo
'Documentation targets:'
1372 @
$(MAKE
) -f
$(srctree
)/doc
/DocBook
/Makefile dochelp
1374 @echo
' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
1375 @echo
' make V=2 [targets] 2 => give reason for rebuild of target'
1376 @echo
' make O=dir [targets] Locate all output files in "dir", including .config'
1377 @echo
' make C=1 [targets] Check all c source with $$CHECK (sparse by default)'
1378 @echo
' make C=2 [targets] Force check of all c source with $$CHECK'
1379 @echo
' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
1380 @echo
' make W=n [targets] Enable extra gcc checks, n=1,2,3 where'
1381 @echo
' 1: warnings which may be relevant and do not occur too often'
1382 @echo
' 2: warnings which occur quite often but may still be relevant'
1383 @echo
' 3: more obscure warnings, can most likely be ignored'
1384 @echo
' Multiple levels can be combined with W=12 or W=123'
1386 @echo
'Execute "make" or "make all" to build all targets marked with [*] '
1387 @echo
'For further info see the ./README file'
1390 # Documentation targets
1391 # ---------------------------------------------------------------------------
1392 %docs
: scripts_basic FORCE
1393 $(Q
)$(MAKE
) $(build
)=scripts build_docproc
1394 $(Q
)$(MAKE
) $(build
)=doc
/DocBook
$@
1397 PHONY
+= prepare scripts
1401 endif #ifeq ($(config-targets),1)
1402 endif #ifeq ($(mixed-targets),1)
1404 PHONY
+= checkstack ubootrelease ubootversion
1407 $(OBJDUMP
) -d u-boot
$$(find .
-name u-boot-spl
) | \
1408 $(PERL
) $(src
)/scripts
/checkstack.pl
$(ARCH
)
1411 @echo
"$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1414 @echo
$(UBOOTVERSION
)
1417 # ---------------------------------------------------------------------------
1418 # Single targets are compatible with:
1419 # - build with mixed source and output
1420 # - build with separate output dir 'make O=...'
1421 # - external modules
1423 # target-dir => where to store outputfile
1424 # build-dir => directory in kernel source tree to use
1426 ifeq ($(KBUILD_EXTMOD
),)
1427 build-dir
= $(patsubst %/,%,$(dir $@
))
1428 target-dir
= $(dir $@
)
1430 zap-slash
=$(filter-out .
,$(patsubst %/,%,$(dir $@
)))
1431 build-dir
= $(KBUILD_EXTMOD
)$(if
$(zap-slash
),/$(zap-slash
))
1432 target-dir
= $(if
$(KBUILD_EXTMOD
),$(dir $<),$(dir $@
))
1435 %.s
: %.c prepare scripts FORCE
1436 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(target-dir
)$(notdir $@
)
1437 %.i
: %.c prepare scripts FORCE
1438 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(target-dir
)$(notdir $@
)
1439 %.o
: %.c prepare scripts FORCE
1440 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(target-dir
)$(notdir $@
)
1441 %.lst
: %.c prepare scripts FORCE
1442 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(target-dir
)$(notdir $@
)
1443 %.s
: %.S prepare scripts FORCE
1444 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(target-dir
)$(notdir $@
)
1445 %.o
: %.S prepare scripts FORCE
1446 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(target-dir
)$(notdir $@
)
1447 %.symtypes
: %.c prepare scripts FORCE
1448 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(target-dir
)$(notdir $@
)
1451 /: prepare scripts FORCE
1453 $(Q
)$(MAKE
) KBUILD_MODULES
=$(if
$(CONFIG_MODULES
),1) \
1454 $(build
)=$(build-dir
)
1455 %/: prepare scripts FORCE
1457 $(Q
)$(MAKE
) KBUILD_MODULES
=$(if
$(CONFIG_MODULES
),1) \
1458 $(build
)=$(build-dir
)
1459 %.ko
: prepare scripts FORCE
1461 $(Q
)$(MAKE
) KBUILD_MODULES
=$(if
$(CONFIG_MODULES
),1) \
1462 $(build
)=$(build-dir
) $(@
:.ko
=.o
)
1463 $(Q
)$(MAKE
) -f
$(srctree
)/scripts
/Makefile.modpost
1465 # FIXME Should go into a make.lib or something
1466 # ===========================================================================
1468 quiet_cmd_rmdirs
= $(if
$(wildcard $(rm-dirs
)),CLEAN
$(wildcard $(rm-dirs
)))
1469 cmd_rmdirs
= rm -rf
$(rm-dirs
)
1471 quiet_cmd_rmfiles
= $(if
$(wildcard $(rm-files
)),CLEAN
$(wildcard $(rm-files
)))
1472 cmd_rmfiles
= rm -f
$(rm-files
)
1474 # read all saved command lines
1476 targets
:= $(wildcard $(sort $(targets
)))
1477 cmd_files
:= $(wildcard .
*.cmd
$(foreach f
,$(targets
),$(dir $(f
)).
$(notdir $(f
)).cmd
))
1479 ifneq ($(cmd_files
),)
1480 $(cmd_files
): ; # Do not try to update included dependency files
1481 include $(cmd_files
)
1484 # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
1486 # $(Q)$(MAKE) $(clean)=dir
1487 clean := -f
$(srctree
)/scripts
/Makefile.
clean obj
1489 endif # skip-makefile
1494 # Declare the contents of the .PHONY variable as phony. We keep that
1495 # information in a variable so we can use it in if_changed and friends.