]> git.ipfire.org Git - thirdparty/u-boot.git/blob - Makefile
dts: Add a u-boot specific dtsi file for the am4372
[thirdparty/u-boot.git] / Makefile
1 # SPDX-License-Identifier: GPL-2.0+
2
3 VERSION = 2019
4 PATCHLEVEL = 01
5 SUBLEVEL =
6 EXTRAVERSION = -rc1
7 NAME =
8
9 # *DOCUMENTATION*
10 # To see a list of typical targets execute "make help"
11 # More info can be located in ./README
12 # Comments in this file are targeted only to the developer, do not
13 # expect to learn how to build the kernel reading this file.
14
15 # o Do not use make's built-in rules and variables
16 # (this increases performance and avoids hard-to-debug behaviour);
17 # o Look for make include files relative to root of kernel src
18 MAKEFLAGS += -rR --include-dir=$(CURDIR)
19
20 # Avoid funny character set dependencies
21 unexport LC_ALL
22 LC_COLLATE=C
23 LC_NUMERIC=C
24 export LC_COLLATE LC_NUMERIC
25
26 # Avoid interference with shell env settings
27 unexport GREP_OPTIONS
28
29 # We are using a recursive build, so we need to do a little thinking
30 # to get the ordering right.
31 #
32 # Most importantly: sub-Makefiles should only ever modify files in
33 # their own directory. If in some directory we have a dependency on
34 # a file in another dir (which doesn't happen often, but it's often
35 # unavoidable when linking the built-in.o targets which finally
36 # turn into vmlinux), we will call a sub make in that other dir, and
37 # after that we are sure that everything which is in that other dir
38 # is now up to date.
39 #
40 # The only cases where we need to modify files which have global
41 # effects are thus separated out and done before the recursive
42 # descending is started. They are now explicitly listed as the
43 # prepare rule.
44
45 # Beautify output
46 # ---------------------------------------------------------------------------
47 #
48 # Normally, we echo the whole command before executing it. By making
49 # that echo $($(quiet)$(cmd)), we now have the possibility to set
50 # $(quiet) to choose other forms of output instead, e.g.
51 #
52 # quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
53 # cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
54 #
55 # If $(quiet) is empty, the whole command will be printed.
56 # If it is set to "quiet_", only the short version will be printed.
57 # If it is set to "silent_", nothing will be printed at all, since
58 # the variable $(silent_cmd_cc_o_c) doesn't exist.
59 #
60 # A simple variant is to prefix commands with $(Q) - that's useful
61 # for commands that shall be hidden in non-verbose mode.
62 #
63 # $(Q)ln $@ :<
64 #
65 # If KBUILD_VERBOSE equals 0 then the above command will be hidden.
66 # If KBUILD_VERBOSE equals 1 then the above command is displayed.
67 #
68 # To put more focus on warnings, be less verbose as default
69 # Use 'make V=1' to see the full commands
70
71 ifeq ("$(origin V)", "command line")
72 KBUILD_VERBOSE = $(V)
73 endif
74 ifndef KBUILD_VERBOSE
75 KBUILD_VERBOSE = 0
76 endif
77
78 ifeq ($(KBUILD_VERBOSE),1)
79 quiet =
80 Q =
81 else
82 quiet=quiet_
83 Q = @
84 endif
85
86 # If the user is running make -s (silent mode), suppress echoing of
87 # commands
88
89 ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4
90 ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
91 quiet=silent_
92 endif
93 else # make-3.8x
94 ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
95 quiet=silent_
96 endif
97 endif
98
99 export quiet Q KBUILD_VERBOSE
100
101 # kbuild supports saving output files in a separate directory.
102 # To locate output files in a separate directory two syntaxes are supported.
103 # In both cases the working directory must be the root of the kernel src.
104 # 1) O=
105 # Use "make O=dir/to/store/output/files/"
106 #
107 # 2) Set KBUILD_OUTPUT
108 # Set the environment variable KBUILD_OUTPUT to point to the directory
109 # where the output files shall be placed.
110 # export KBUILD_OUTPUT=dir/to/store/output/files/
111 # make
112 #
113 # The O= assignment takes precedence over the KBUILD_OUTPUT environment
114 # variable.
115
116 # KBUILD_SRC is set on invocation of make in OBJ directory
117 # KBUILD_SRC is not intended to be used by the regular user (for now)
118 ifeq ($(KBUILD_SRC),)
119
120 # OK, Make called in directory where kernel src resides
121 # Do we want to locate output files in a separate directory?
122 ifeq ("$(origin O)", "command line")
123 KBUILD_OUTPUT := $(O)
124 endif
125
126 # That's our default target when none is given on the command line
127 PHONY := _all
128 _all:
129
130 # Cancel implicit rules on top Makefile
131 $(CURDIR)/Makefile Makefile: ;
132
133 ifneq ($(KBUILD_OUTPUT),)
134 # Invoke a second make in the output directory, passing relevant variables
135 # check that the output directory actually exists
136 saved-output := $(KBUILD_OUTPUT)
137 KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \
138 && /bin/pwd)
139 $(if $(KBUILD_OUTPUT),, \
140 $(error failed to create output directory "$(saved-output)"))
141
142 PHONY += $(MAKECMDGOALS) sub-make
143
144 $(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
145 @:
146
147 sub-make: FORCE
148 $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \
149 -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS))
150
151 # Leave processing to above invocation of make
152 skip-makefile := 1
153 endif # ifneq ($(KBUILD_OUTPUT),)
154 endif # ifeq ($(KBUILD_SRC),)
155
156 # We process the rest of the Makefile if this is the final invocation of make
157 ifeq ($(skip-makefile),)
158
159 # Do not print "Entering directory ...",
160 # but we want to display it when entering to the output directory
161 # so that IDEs/editors are able to understand relative filenames.
162 MAKEFLAGS += --no-print-directory
163
164 # Call a source code checker (by default, "sparse") as part of the
165 # C compilation.
166 #
167 # Use 'make C=1' to enable checking of only re-compiled files.
168 # Use 'make C=2' to enable checking of *all* source files, regardless
169 # of whether they are re-compiled or not.
170 #
171 # See the file "Documentation/sparse.txt" for more details, including
172 # where to get the "sparse" utility.
173
174 ifeq ("$(origin C)", "command line")
175 KBUILD_CHECKSRC = $(C)
176 endif
177 ifndef KBUILD_CHECKSRC
178 KBUILD_CHECKSRC = 0
179 endif
180
181 # Use make M=dir to specify directory of external module to build
182 # Old syntax make ... SUBDIRS=$PWD is still supported
183 # Setting the environment variable KBUILD_EXTMOD take precedence
184 ifdef SUBDIRS
185 KBUILD_EXTMOD ?= $(SUBDIRS)
186 endif
187
188 ifeq ("$(origin M)", "command line")
189 KBUILD_EXTMOD := $(M)
190 endif
191
192 # If building an external module we do not care about the all: rule
193 # but instead _all depend on modules
194 PHONY += all
195 ifeq ($(KBUILD_EXTMOD),)
196 _all: all
197 else
198 _all: modules
199 endif
200
201 ifeq ($(KBUILD_SRC),)
202 # building in the source tree
203 srctree := .
204 else
205 ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR)))
206 # building in a subdirectory of the source tree
207 srctree := ..
208 else
209 srctree := $(KBUILD_SRC)
210 endif
211 endif
212 objtree := .
213 src := $(srctree)
214 obj := $(objtree)
215
216 VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
217
218 export srctree objtree VPATH
219
220 # Make sure CDPATH settings don't interfere
221 unexport CDPATH
222
223 #########################################################################
224
225 HOSTARCH := $(shell uname -m | \
226 sed -e s/i.86/x86/ \
227 -e s/sun4u/sparc64/ \
228 -e s/arm.*/arm/ \
229 -e s/sa110/arm/ \
230 -e s/ppc64/powerpc/ \
231 -e s/ppc/powerpc/ \
232 -e s/macppc/powerpc/\
233 -e s/sh.*/sh/)
234
235 HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
236 sed -e 's/\(cygwin\).*/cygwin/')
237
238 export HOSTARCH HOSTOS
239
240 #########################################################################
241
242 # set default to nothing for native builds
243 ifeq ($(HOSTARCH),$(ARCH))
244 CROSS_COMPILE ?=
245 endif
246
247 KCONFIG_CONFIG ?= .config
248 export KCONFIG_CONFIG
249
250 # SHELL used by kbuild
251 CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
252 else if [ -x /bin/bash ]; then echo /bin/bash; \
253 else echo sh; fi ; fi)
254
255 HOSTCC = cc
256 HOSTCXX = c++
257 HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer \
258 $(if $(CONFIG_TOOLS_DEBUG),-g)
259 HOSTCXXFLAGS = -O2
260
261 # With the move to GCC 6, we have implicitly upgraded our language
262 # standard to GNU11 (see https://gcc.gnu.org/gcc-5/porting_to.html).
263 # Some Linux distributions (including RHEL7, SLES13, Debian 8) still
264 # have older compilers as their default, so we make it explicit for
265 # these that our host tools are GNU11 (i.e. C11 w/ GNU extensions).
266 CSTD_FLAG := -std=gnu11
267 ifeq ($(HOSTOS),linux)
268 HOSTCFLAGS += $(CSTD_FLAG)
269 endif
270
271 ifeq ($(HOSTOS),cygwin)
272 HOSTCFLAGS += -ansi
273 endif
274
275 # Mac OS X / Darwin's C preprocessor is Apple specific. It
276 # generates numerous errors and warnings. We want to bypass it
277 # and use GNU C's cpp. To do this we pass the -traditional-cpp
278 # option to the compiler. Note that the -traditional-cpp flag
279 # DOES NOT have the same semantics as GNU C's flag, all it does
280 # is invoke the GNU preprocessor in stock ANSI/ISO C fashion.
281 #
282 # Apple's linker is similar, thanks to the new 2 stage linking
283 # multiple symbol definitions are treated as errors, hence the
284 # -multiply_defined suppress option to turn off this error.
285 #
286 ifeq ($(HOSTOS),darwin)
287 # get major and minor product version (e.g. '10' and '6' for Snow Leopard)
288 DARWIN_MAJOR_VERSION = $(shell sw_vers -productVersion | cut -f 1 -d '.')
289 DARWIN_MINOR_VERSION = $(shell sw_vers -productVersion | cut -f 2 -d '.')
290
291 os_x_before = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \
292 $(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
293
294 # Snow Leopards build environment has no longer restrictions as described above
295 HOSTCC = $(call os_x_before, 10, 5, "cc", "gcc")
296 HOSTCFLAGS += $(call os_x_before, 10, 4, "-traditional-cpp")
297 HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress")
298
299 # since Lion (10.7) ASLR is on by default, but we use linker generated lists
300 # in some host tools which is a problem then ... so disable ASLR for these
301 # tools
302 HOSTLDFLAGS += $(call os_x_before, 10, 7, "", "-Xlinker -no_pie")
303 endif
304
305 # Decide whether to build built-in, modular, or both.
306 # Normally, just do built-in.
307
308 KBUILD_MODULES :=
309 KBUILD_BUILTIN := 1
310
311 # If we have only "make modules", don't compile built-in objects.
312 # When we're building modules with modversions, we need to consider
313 # the built-in objects during the descend as well, in order to
314 # make sure the checksums are up to date before we record them.
315
316 ifeq ($(MAKECMDGOALS),modules)
317 KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
318 endif
319
320 # If we have "make <whatever> modules", compile modules
321 # in addition to whatever we do anyway.
322 # Just "make" or "make all" shall build modules as well
323
324 # U-Boot does not need modules
325 #ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
326 # KBUILD_MODULES := 1
327 #endif
328
329 #ifeq ($(MAKECMDGOALS),)
330 # KBUILD_MODULES := 1
331 #endif
332
333 export KBUILD_MODULES KBUILD_BUILTIN
334 export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
335
336 # We need some generic definitions (do not try to remake the file).
337 scripts/Kbuild.include: ;
338 include scripts/Kbuild.include
339
340 # Make variables (CC, etc...)
341
342 AS = $(CROSS_COMPILE)as
343 # Always use GNU ld
344 ifneq ($(shell $(CROSS_COMPILE)ld.bfd -v 2> /dev/null),)
345 LD = $(CROSS_COMPILE)ld.bfd
346 else
347 LD = $(CROSS_COMPILE)ld
348 endif
349 CC = $(CROSS_COMPILE)gcc
350 CPP = $(CC) -E
351 AR = $(CROSS_COMPILE)ar
352 NM = $(CROSS_COMPILE)nm
353 LDR = $(CROSS_COMPILE)ldr
354 STRIP = $(CROSS_COMPILE)strip
355 OBJCOPY = $(CROSS_COMPILE)objcopy
356 OBJDUMP = $(CROSS_COMPILE)objdump
357 LEX = flex
358 YACC = bison
359 AWK = awk
360 PERL = perl
361 PYTHON ?= python
362 PYTHON2 = python2
363 PYTHON3 = python3
364 DTC ?= $(objtree)/scripts/dtc/dtc
365 CHECK = sparse
366
367 CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
368 -Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF)
369
370 KBUILD_CPPFLAGS := -D__KERNEL__ -D__UBOOT__
371
372 KBUILD_CFLAGS := -Wall -Wstrict-prototypes \
373 -Wno-format-security \
374 -fno-builtin -ffreestanding $(CSTD_FLAG)
375 KBUILD_CFLAGS += -fshort-wchar -fno-strict-aliasing
376 KBUILD_AFLAGS := -D__ASSEMBLY__
377
378 # Don't generate position independent code
379 KBUILD_CFLAGS += $(call cc-option,-fno-PIE)
380 KBUILD_AFLAGS += $(call cc-option,-fno-PIE)
381
382 # Read UBOOTRELEASE from include/config/uboot.release (if it exists)
383 UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null)
384 UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
385
386 export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION
387 export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR
388 export CONFIG_SHELL HOSTCC HOSTCFLAGS HOSTLDFLAGS CROSS_COMPILE AS LD CC
389 export CPP AR NM LDR STRIP OBJCOPY OBJDUMP
390 export MAKE LEX YACC AWK PERL PYTHON PYTHON2 PYTHON3
391 export HOSTCXX HOSTCXXFLAGS CHECK CHECKFLAGS DTC DTC_FLAGS
392
393 export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS LDFLAGS
394 export KBUILD_CFLAGS KBUILD_AFLAGS
395
396 # When compiling out-of-tree modules, put MODVERDIR in the module
397 # tree rather than in the kernel tree. The kernel tree might
398 # even be read-only.
399 export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
400
401 # Files to ignore in find ... statements
402
403 export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \
404 -name CVS -o -name .pc -o -name .hg -o -name .git \) \
405 -prune -o
406 export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
407 --exclude CVS --exclude .pc --exclude .hg --exclude .git
408
409 # ===========================================================================
410 # Rules shared between *config targets and build targets
411
412 # Basic helpers built in scripts/
413 PHONY += scripts_basic
414 scripts_basic:
415 $(Q)$(MAKE) $(build)=scripts/basic
416 $(Q)rm -f .tmp_quiet_recordmcount
417
418 # To avoid any implicit rule to kick in, define an empty command.
419 scripts/basic/%: scripts_basic ;
420
421 PHONY += outputmakefile
422 # outputmakefile generates a Makefile in the output directory, if using a
423 # separate output directory. This allows convenient use of make in the
424 # output directory.
425 outputmakefile:
426 ifneq ($(KBUILD_SRC),)
427 $(Q)ln -fsn $(srctree) source
428 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
429 $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
430 endif
431
432 # To make sure we do not include .config for any of the *config targets
433 # catch them early, and hand them over to scripts/kconfig/Makefile
434 # It is allowed to specify more targets when calling make, including
435 # mixing *config targets and build targets.
436 # For example 'make oldconfig all'.
437 # Detect when mixed targets is specified, and make a second invocation
438 # of make so .config is not included in this case either (for *config).
439
440 version_h := include/generated/version_autogenerated.h
441 timestamp_h := include/generated/timestamp_autogenerated.h
442 defaultenv_h := include/generated/defaultenv_autogenerated.h
443
444 no-dot-config-targets := clean clobber mrproper distclean \
445 help %docs check% coccicheck \
446 ubootversion backup tests check qcheck
447
448 config-targets := 0
449 mixed-targets := 0
450 dot-config := 1
451
452 ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
453 ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
454 dot-config := 0
455 endif
456 endif
457
458 ifeq ($(KBUILD_EXTMOD),)
459 ifneq ($(filter config %config,$(MAKECMDGOALS)),)
460 config-targets := 1
461 ifneq ($(words $(MAKECMDGOALS)),1)
462 mixed-targets := 1
463 endif
464 endif
465 endif
466
467 ifeq ($(mixed-targets),1)
468 # ===========================================================================
469 # We're called with mixed targets (*config and build targets).
470 # Handle them one by one.
471
472 PHONY += $(MAKECMDGOALS) __build_one_by_one
473
474 $(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one
475 @:
476
477 __build_one_by_one:
478 $(Q)set -e; \
479 for i in $(MAKECMDGOALS); do \
480 $(MAKE) -f $(srctree)/Makefile $$i; \
481 done
482
483 else
484 ifeq ($(config-targets),1)
485 # ===========================================================================
486 # *config targets only - make sure prerequisites are updated, and descend
487 # in scripts/kconfig to make the *config target
488
489 KBUILD_DEFCONFIG := sandbox_defconfig
490 export KBUILD_DEFCONFIG KBUILD_KCONFIG
491
492 config: scripts_basic outputmakefile FORCE
493 $(Q)$(MAKE) $(build)=scripts/kconfig $@
494
495 %config: scripts_basic outputmakefile FORCE
496 $(Q)$(MAKE) $(build)=scripts/kconfig $@
497
498 else
499 # ===========================================================================
500 # Build targets only - this includes vmlinux, arch specific targets, clean
501 # targets and others. In general all targets except *config targets.
502
503 # Additional helpers built in scripts/
504 # Carefully list dependencies so we do not try to build scripts twice
505 # in parallel
506 PHONY += scripts
507 scripts: scripts_basic include/config/auto.conf
508 $(Q)$(MAKE) $(build)=$(@)
509
510 ifeq ($(dot-config),1)
511 # Read in config
512 -include include/config/auto.conf
513
514 # Read in dependencies to all Kconfig* files, make sure to run
515 # oldconfig if changes are detected.
516 -include include/config/auto.conf.cmd
517
518 # To avoid any implicit rule to kick in, define an empty command
519 $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
520
521 # If .config is newer than include/config/auto.conf, someone tinkered
522 # with it and forgot to run make oldconfig.
523 # if auto.conf.cmd is missing then we are probably in a cleaned tree so
524 # we execute the config step to be sure to catch updated Kconfig files
525 include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
526 $(Q)$(MAKE) -f $(srctree)/Makefile syncconfig
527 @# If the following part fails, include/config/auto.conf should be
528 @# deleted so "make silentoldconfig" will be re-run on the next build.
529 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf || \
530 { rm -f include/config/auto.conf; false; }
531 @# include/config.h has been updated after "make silentoldconfig".
532 @# We need to touch include/config/auto.conf so it gets newer
533 @# than include/config.h.
534 @# Otherwise, 'make silentoldconfig' would be invoked twice.
535 $(Q)touch include/config/auto.conf
536
537 u-boot.cfg spl/u-boot.cfg tpl/u-boot.cfg: include/config.h FORCE
538 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf $(@)
539
540 -include include/autoconf.mk
541 -include include/autoconf.mk.dep
542
543 # We want to include arch/$(ARCH)/config.mk only when include/config/auto.conf
544 # is up-to-date. When we switch to a different board configuration, old CONFIG
545 # macros are still remaining in include/config/auto.conf. Without the following
546 # gimmick, wrong config.mk would be included leading nasty warnings/errors.
547 ifneq ($(wildcard $(KCONFIG_CONFIG)),)
548 ifneq ($(wildcard include/config/auto.conf),)
549 autoconf_is_old := $(shell find . -path ./$(KCONFIG_CONFIG) -newer \
550 include/config/auto.conf)
551 ifeq ($(autoconf_is_old),)
552 include config.mk
553 include arch/$(ARCH)/Makefile
554 endif
555 endif
556 endif
557
558 # These are set by the arch-specific config.mk. Make sure they are exported
559 # so they can be used when building an EFI application.
560 export EFI_LDS # Filename of EFI link script in arch/$(ARCH)/lib
561 export EFI_CRT0 # Filename of EFI CRT0 in arch/$(ARCH)/lib
562 export EFI_RELOC # Filename of EFU relocation code in arch/$(ARCH)/lib
563 export CFLAGS_EFI # Compiler flags to add when building EFI app
564 export CFLAGS_NON_EFI # Compiler flags to remove when building EFI app
565 export EFI_TARGET # binutils target if EFI is natively supported
566
567 # If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
568 # that (or fail if absent). Otherwise, search for a linker script in a
569 # standard location.
570
571 ifndef LDSCRIPT
572 #LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug
573 ifdef CONFIG_SYS_LDSCRIPT
574 # need to strip off double quotes
575 LDSCRIPT := $(srctree)/$(CONFIG_SYS_LDSCRIPT:"%"=%)
576 endif
577 endif
578
579 # If there is no specified link script, we look in a number of places for it
580 ifndef LDSCRIPT
581 ifeq ($(wildcard $(LDSCRIPT)),)
582 LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds
583 endif
584 ifeq ($(wildcard $(LDSCRIPT)),)
585 LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot.lds
586 endif
587 ifeq ($(wildcard $(LDSCRIPT)),)
588 LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot.lds
589 endif
590 endif
591
592 else
593 # Dummy target needed, because used as prerequisite
594 include/config/auto.conf: ;
595 endif # $(dot-config)
596
597 #
598 # Xtensa linker script cannot be preprocessed with -ansi because of
599 # preprocessor operations on strings that don't make C identifiers.
600 #
601 ifeq ($(CONFIG_XTENSA),)
602 LDPPFLAGS += -ansi
603 endif
604
605 ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
606 KBUILD_CFLAGS += -Os
607 else
608 KBUILD_CFLAGS += -O2
609 endif
610
611 KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector)
612 KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks)
613
614 # change __FILE__ to the relative path from the srctree
615 KBUILD_CFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=)
616
617 KBUILD_CFLAGS += -g
618 # $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format>
619 # option to the assembler.
620 KBUILD_AFLAGS += -g
621
622 # Report stack usage if supported
623 # ARC tools based on GCC 7.1 has an issue with stack usage
624 # with naked functions, see commit message for more details
625 ifndef CONFIG_ARC
626 ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-stack-usage.sh $(CC)),y)
627 KBUILD_CFLAGS += -fstack-usage
628 endif
629 endif
630
631 KBUILD_CFLAGS += $(call cc-option,-Wno-format-nonliteral)
632 ifeq ($(cc-name),clang)
633 KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,)
634 KBUILD_CFLAGS += $(call cc-disable-warning, format-invalid-specifier)
635 KBUILD_CFLAGS += $(call cc-disable-warning, gnu)
636 KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
637 KBUILD_CFLAGS += $(call cc-option, -fcatch-undefined-behavior)
638 endif
639
640 # turn jbsr into jsr for m68k
641 ifeq ($(ARCH),m68k)
642 ifeq ($(findstring 3.4,$(shell $(CC) --version)),3.4)
643 KBUILD_AFLAGS += -Wa,-gstabs,-S
644 endif
645 endif
646
647 # Prohibit date/time macros, which would make the build non-deterministic
648 KBUILD_CFLAGS += $(call cc-option,-Werror=date-time)
649
650 include scripts/Makefile.extrawarn
651
652 # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
653 KBUILD_CPPFLAGS += $(KCPPFLAGS)
654 KBUILD_AFLAGS += $(KAFLAGS)
655 KBUILD_CFLAGS += $(KCFLAGS)
656
657 # Use UBOOTINCLUDE when you must reference the include/ directory.
658 # Needed to be compatible with the O= option
659 UBOOTINCLUDE := \
660 -Iinclude \
661 $(if $(KBUILD_SRC), -I$(srctree)/include) \
662 $(if $(CONFIG_$(SPL_)SYS_THUMB_BUILD), \
663 $(if $(CONFIG_HAS_THUMB2),, \
664 -I$(srctree)/arch/$(ARCH)/thumb1/include),) \
665 -I$(srctree)/arch/$(ARCH)/include \
666 -include $(srctree)/include/linux/kconfig.h
667
668 NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
669 CHECKFLAGS += $(NOSTDINC_FLAGS)
670
671 # FIX ME
672 cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
673 $(NOSTDINC_FLAGS)
674 c_flags := $(KBUILD_CFLAGS) $(cpp_flags)
675
676 #########################################################################
677 # U-Boot objects....order is important (i.e. start must be first)
678
679 HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
680
681 libs-y += lib/
682 libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
683 libs-$(CONFIG_OF_EMBED) += dts/
684 libs-y += fs/
685 libs-y += net/
686 libs-y += disk/
687 libs-y += drivers/
688 libs-y += drivers/dma/
689 libs-y += drivers/gpio/
690 libs-y += drivers/i2c/
691 libs-y += drivers/mtd/
692 libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/raw/
693 libs-y += drivers/mtd/onenand/
694 libs-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/
695 libs-y += drivers/mtd/spi/
696 libs-y += drivers/net/
697 libs-y += drivers/net/phy/
698 libs-y += drivers/power/ \
699 drivers/power/domain/ \
700 drivers/power/fuel_gauge/ \
701 drivers/power/mfd/ \
702 drivers/power/pmic/ \
703 drivers/power/battery/ \
704 drivers/power/regulator/
705 libs-y += drivers/spi/
706 libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/
707 libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
708 libs-$(CONFIG_SYS_FSL_MMDC) += drivers/ddr/fsl/
709 libs-$(CONFIG_ALTERA_SDRAM) += drivers/ddr/altera/
710 libs-y += drivers/serial/
711 libs-y += drivers/usb/dwc3/
712 libs-y += drivers/usb/common/
713 libs-y += drivers/usb/emul/
714 libs-y += drivers/usb/eth/
715 libs-y += drivers/usb/gadget/
716 libs-y += drivers/usb/gadget/udc/
717 libs-y += drivers/usb/host/
718 libs-y += drivers/usb/musb/
719 libs-y += drivers/usb/musb-new/
720 libs-y += drivers/usb/phy/
721 libs-y += drivers/usb/ulpi/
722 libs-y += cmd/
723 libs-y += common/
724 libs-y += env/
725 libs-$(CONFIG_API) += api/
726 libs-$(CONFIG_HAS_POST) += post/
727 libs-y += test/
728 libs-y += test/dm/
729 libs-$(CONFIG_UT_ENV) += test/env/
730 libs-$(CONFIG_UT_OVERLAY) += test/overlay/
731
732 libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
733
734 libs-y := $(sort $(libs-y))
735
736 u-boot-dirs := $(patsubst %/,%,$(filter %/, $(libs-y))) tools examples
737
738 u-boot-alldirs := $(sort $(u-boot-dirs) $(patsubst %/,%,$(filter %/, $(libs-))))
739
740 libs-y := $(patsubst %/, %/built-in.o, $(libs-y))
741
742 u-boot-init := $(head-y)
743 u-boot-main := $(libs-y)
744
745
746 # Add GCC lib
747 ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
748 PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
749 else
750 PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc
751 endif
752 PLATFORM_LIBS += $(PLATFORM_LIBGCC)
753
754 ifdef CONFIG_CC_COVERAGE
755 KBUILD_CFLAGS += --coverage
756 PLATFORM_LIBGCC += -lgcov
757 endif
758
759 export PLATFORM_LIBS
760 export PLATFORM_LIBGCC
761
762 # Special flags for CPP when processing the linker script.
763 # Pass the version down so we can handle backwards compatibility
764 # on the fly.
765 LDPPFLAGS += \
766 -include $(srctree)/include/u-boot/u-boot.lds.h \
767 -DCPUDIR=$(CPUDIR) \
768 $(shell $(LD) --version | \
769 sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
770
771 #########################################################################
772 #########################################################################
773
774 ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
775 BOARD_SIZE_CHECK = \
776 @actual=`wc -c $@ | awk '{print $$1}'`; \
777 limit=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \
778 if test $$actual -gt $$limit; then \
779 echo "$@ exceeds file size limit:" >&2 ; \
780 echo " limit: $$limit bytes" >&2 ; \
781 echo " actual: $$actual bytes" >&2 ; \
782 echo " excess: $$((actual - limit)) bytes" >&2; \
783 exit 1; \
784 fi
785 else
786 BOARD_SIZE_CHECK =
787 endif
788
789 # Statically apply RELA-style relocations (currently arm64 only)
790 # This is useful for arm64 where static relocation needs to be performed on
791 # the raw binary, but certain simulators only accept an ELF file (but don't
792 # do the relocation).
793 ifneq ($(CONFIG_STATIC_RELA),)
794 # $(1) is u-boot ELF, $(2) is u-boot bin, $(3) is text base
795 DO_STATIC_RELA = \
796 start=$$($(NM) $(1) | grep __rel_dyn_start | cut -f 1 -d ' '); \
797 end=$$($(NM) $(1) | grep __rel_dyn_end | cut -f 1 -d ' '); \
798 tools/relocate-rela $(2) $(3) $$start $$end
799 else
800 DO_STATIC_RELA =
801 endif
802
803 # Always append ALL so that arch config.mk's can add custom ones
804 ALL-y += u-boot.srec u-boot.bin u-boot.sym System.map binary_size_check
805
806 ALL-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin
807 ifeq ($(CONFIG_SPL_FSL_PBL),y)
808 ALL-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin
809 else
810 ifneq ($(CONFIG_SECURE_BOOT), y)
811 # For Secure Boot The Image needs to be signed and Header must also
812 # be included. So The image has to be built explicitly
813 ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl
814 endif
815 endif
816 ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin
817 ifeq ($(CONFIG_MX6)$(CONFIG_SECURE_BOOT), yy)
818 ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
819 else
820 ifeq ($(CONFIG_MX7)$(CONFIG_SECURE_BOOT), yy)
821 ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
822 else
823 ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
824 endif
825 endif
826 ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
827 ALL-$(CONFIG_OF_SEPARATE) += u-boot.dtb
828 ifeq ($(CONFIG_SPL_FRAMEWORK),y)
829 ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img
830 endif
831 ALL-$(CONFIG_OF_HOSTFILE) += u-boot.dtb
832 ifneq ($(CONFIG_SPL_TARGET),)
833 ALL-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%)
834 endif
835 ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf
836 ALL-$(CONFIG_EFI_APP) += u-boot-app.efi
837 ALL-$(CONFIG_EFI_STUB) += u-boot-payload.efi
838
839 ifneq ($(BUILD_ROM)$(CONFIG_BUILD_ROM),)
840 ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
841 endif
842
843 # Build a combined spl + u-boot image for sunxi
844 ifeq ($(CONFIG_ARCH_SUNXI)$(CONFIG_SPL),yy)
845 ALL-y += u-boot-sunxi-with-spl.bin
846 endif
847
848 # enable combined SPL/u-boot/dtb rules for tegra
849 ifeq ($(CONFIG_TEGRA)$(CONFIG_SPL),yy)
850 ALL-y += u-boot-tegra.bin u-boot-nodtb-tegra.bin
851 ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb-tegra.bin
852 endif
853
854 ALL-$(CONFIG_ARCH_MEDIATEK) += u-boot-mtk.bin
855
856 # Add optional build target if defined in board/cpu/soc headers
857 ifneq ($(CONFIG_BUILD_TARGET),)
858 ALL-y += $(CONFIG_BUILD_TARGET:"%"=%)
859 endif
860
861 ifneq ($(CONFIG_SYS_INIT_SP_BSS_OFFSET),)
862 ALL-y += init_sp_bss_offset_check
863 endif
864
865 ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
866 ALL-y += u-boot-with-dtb.bin
867 endif
868
869 LDFLAGS_u-boot += $(LDFLAGS_FINAL)
870
871 # Avoid 'Not enough room for program headers' error on binutils 2.28 onwards.
872 LDFLAGS_u-boot += $(call ld-option, --no-dynamic-linker)
873
874 ifeq ($(CONFIG_ARC)$(CONFIG_NIOS2)$(CONFIG_X86)$(CONFIG_XTENSA),)
875 LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE)
876 endif
877
878 # Normally we fill empty space with 0xff
879 quiet_cmd_objcopy = OBJCOPY $@
880 cmd_objcopy = $(OBJCOPY) --gap-fill=0xff $(OBJCOPYFLAGS) \
881 $(OBJCOPYFLAGS_$(@F)) $< $@
882
883 # Provide a version which does not do this, for use by EFI
884 quiet_cmd_zobjcopy = OBJCOPY $@
885 cmd_zobjcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
886
887 quiet_cmd_efipayload = OBJCOPY $@
888 cmd_efipayload = $(OBJCOPY) -I binary -O $(EFIPAYLOAD_BFDTARGET) -B $(EFIPAYLOAD_BFDARCH) $< $@
889
890 MKIMAGEOUTPUT ?= /dev/null
891
892 quiet_cmd_mkimage = MKIMAGE $@
893 cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
894 >$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
895
896 quiet_cmd_mkfitimage = MKIMAGE $@
897 cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(U_BOOT_ITS) -E $@ \
898 >$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
899
900 quiet_cmd_cat = CAT $@
901 cmd_cat = cat $(filter-out $(PHONY), $^) > $@
902
903 append = cat $(filter-out $< $(PHONY), $^) >> $@
904
905 quiet_cmd_pad_cat = CAT $@
906 cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@
907
908 cfg: u-boot.cfg
909
910 quiet_cmd_cfgcheck = CFGCHK $2
911 cmd_cfgcheck = $(srctree)/scripts/check-config.sh $2 \
912 $(srctree)/scripts/config_whitelist.txt $(srctree)
913
914 all: $(ALL-y) cfg
915 ifeq ($(CONFIG_DM_I2C_COMPAT)$(CONFIG_SANDBOX),y)
916 @echo "===================== WARNING ======================"
917 @echo "This board uses CONFIG_DM_I2C_COMPAT. Please remove"
918 @echo "(possibly in a subsequent patch in your series)"
919 @echo "before sending patches to the mailing list."
920 @echo "===================================================="
921 endif
922 ifeq ($(CONFIG_MMC),y)
923 ifneq ($(CONFIG_DM_MMC)$(CONFIG_OF_CONTROL)$(CONFIG_BLK),yyy)
924 @echo "===================== WARNING ======================"
925 @echo "This board does not use CONFIG_DM_MMC. Please update"
926 @echo "the board to use CONFIG_DM_MMC before the v2019.04 release."
927 @echo "Failure to update by the deadline may result in board removal."
928 @echo "See doc/driver-model/MIGRATION.txt for more info."
929 @echo "===================================================="
930 endif
931 endif
932 ifeq ($(CONFIG_USB),y)
933 ifneq ($(CONFIG_DM_USB)$(CONFIG_OF_CONTROL)$(CONFIG_BLK),yyy)
934 @echo "===================== WARNING ======================"
935 @echo "This board does not use CONFIG_DM_USB. Please update"
936 @echo "the board to use CONFIG_DM_USB before the v2019.07 release."
937 @echo "Failure to update by the deadline may result in board removal."
938 @echo "See doc/driver-model/MIGRATION.txt for more info."
939 @echo "===================================================="
940 endif
941 endif
942 ifeq ($(CONFIG_LIBATA)$(CONFIG_DM_SCSI)$(CONFIG_MVSATA_IDE),y)
943 @echo "===================== WARNING ======================"
944 @echo "This board does not use CONFIG_DM_SCSI. Please update"
945 @echo "the storage controller to use CONFIG_DM_SCSI before the v2019.07 release."
946 @echo "Failure to update by the deadline may result in board removal."
947 @echo "See doc/driver-model/MIGRATION.txt for more info."
948 @echo "===================================================="
949 endif
950 ifeq ($(CONFIG_OF_EMBED),y)
951 @echo "===================== WARNING ======================"
952 @echo "CONFIG_OF_EMBED is enabled. This option should only"
953 @echo "be used for debugging purposes. Please use"
954 @echo "CONFIG_OF_SEPARATE for boards in mainline."
955 @echo "See doc/README.fdt-control for more info."
956 @echo "===================================================="
957 endif
958 @# Check that this build does not use CONFIG options that we do not
959 @# know about unless they are in Kconfig. All the existing CONFIG
960 @# options are whitelisted, so new ones should not be added.
961 $(call cmd,cfgcheck,u-boot.cfg)
962
963 PHONY += dtbs
964 dtbs: dts/dt.dtb
965 @:
966 dts/dt.dtb: u-boot
967 $(Q)$(MAKE) $(build)=dts dtbs
968
969 quiet_cmd_copy = COPY $@
970 cmd_copy = cp $< $@
971
972 ifeq ($(CONFIG_MULTI_DTB_FIT),y)
973
974 fit-dtb.blob: dts/dt.dtb FORCE
975 $(call if_changed,mkimage)
976
977 MKIMAGEFLAGS_fit-dtb.blob = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
978 -a 0 -e 0 -E \
979 $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) -d /dev/null
980
981 u-boot-fit-dtb.bin: u-boot-nodtb.bin fit-dtb.blob
982 $(call if_changed,cat)
983
984 u-boot.bin: u-boot-fit-dtb.bin FORCE
985 $(call if_changed,copy)
986 else ifeq ($(CONFIG_OF_SEPARATE),y)
987 u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
988 $(call if_changed,cat)
989
990 u-boot.bin: u-boot-dtb.bin FORCE
991 $(call if_changed,copy)
992 else
993 u-boot.bin: u-boot-nodtb.bin FORCE
994 $(call if_changed,copy)
995 endif
996
997 %.imx: %.bin
998 $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
999
1000 %.vyb: %.imx
1001 $(Q)$(MAKE) $(build)=arch/arm/cpu/armv7/vf610 $@
1002
1003 quiet_cmd_copy = COPY $@
1004 cmd_copy = cp $< $@
1005
1006 u-boot.dtb: dts/dt.dtb
1007 $(call cmd,copy)
1008
1009 OBJCOPYFLAGS_u-boot.hex := -O ihex
1010
1011 OBJCOPYFLAGS_u-boot.srec := -O srec
1012
1013 u-boot.hex u-boot.srec: u-boot FORCE
1014 $(call if_changed,objcopy)
1015
1016 OBJCOPYFLAGS_u-boot-elf.srec := $(OBJCOPYFLAGS_u-boot.srec)
1017
1018 u-boot-elf.srec: u-boot.elf FORCE
1019 $(call if_changed,objcopy)
1020
1021 OBJCOPYFLAGS_u-boot-spl.srec = $(OBJCOPYFLAGS_u-boot.srec)
1022
1023 spl/u-boot-spl.srec: spl/u-boot-spl FORCE
1024 $(call if_changed,objcopy)
1025
1026 OBJCOPYFLAGS_u-boot-nodtb.bin := -O binary \
1027 $(if $(CONFIG_X86_16BIT_INIT),-R .start16 -R .resetvec) \
1028 $(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR),-R .bootpg -R .resetvec)
1029
1030 OBJCOPYFLAGS_u-boot-spl.hex = $(OBJCOPYFLAGS_u-boot.hex)
1031
1032 spl/u-boot-spl.hex: spl/u-boot-spl FORCE
1033 $(call if_changed,objcopy)
1034
1035 binary_size_check: u-boot-nodtb.bin FORCE
1036 @file_size=$(shell wc -c u-boot-nodtb.bin | awk '{print $$1}') ; \
1037 map_size=$(shell cat u-boot.map | \
1038 awk '/_image_copy_start/ {start = $$1} /_image_binary_end/ {end = $$1} END {if (start != "" && end != "") print "ibase=16; " toupper(end) " - " toupper(start)}' \
1039 | sed 's/0X//g' \
1040 | bc); \
1041 if [ "" != "$$map_size" ]; then \
1042 if test $$map_size -ne $$file_size; then \
1043 echo "u-boot.map shows a binary size of $$map_size" >&2 ; \
1044 echo " but u-boot-nodtb.bin shows $$file_size" >&2 ; \
1045 exit 1; \
1046 fi \
1047 fi
1048
1049 ifneq ($(CONFIG_SYS_INIT_SP_BSS_OFFSET),)
1050 ifneq ($(CONFIG_SYS_MALLOC_F_LEN),)
1051 subtract_sys_malloc_f_len = space=$$(($${space} - $(CONFIG_SYS_MALLOC_F_LEN)))
1052 else
1053 subtract_sys_malloc_f_len = true
1054 endif
1055 # The 1/4 margin below is somewhat arbitrary. The likely initial SP usage is
1056 # so low that the DTB could probably use 90%+ of the available space, for
1057 # current values of CONFIG_SYS_INIT_SP_BSS_OFFSET at least. However, let's be
1058 # safe for now and tweak this later if space becomes tight.
1059 # A rejected alternative would be to check that some absolute minimum stack
1060 # space was available. However, since CONFIG_SYS_INIT_SP_BSS_OFFSET is
1061 # deliberately build-specific, to take account of build-to-build stack usage
1062 # differences due to different feature sets, there is no common absolute value
1063 # to check against.
1064 init_sp_bss_offset_check: u-boot.dtb FORCE
1065 @dtb_size=$(shell wc -c u-boot.dtb | awk '{print $$1}') ; \
1066 space=$(CONFIG_SYS_INIT_SP_BSS_OFFSET) ; \
1067 $(subtract_sys_malloc_f_len) ; \
1068 quarter_space=$$(($${space} / 4)) ; \
1069 if [ $${dtb_size} -gt $${quarter_space} ]; then \
1070 echo "u-boot.dtb is larger than 1 quarter of " >&2 ; \
1071 echo "(CONFIG_SYS_INIT_SP_BSS_OFFSET - CONFIG_SYS_MALLOC_F_LEN)" >&2 ; \
1072 exit 1 ; \
1073 fi
1074 endif
1075
1076 u-boot-nodtb.bin: u-boot FORCE
1077 $(call if_changed,objcopy)
1078 $(call DO_STATIC_RELA,$<,$@,$(CONFIG_SYS_TEXT_BASE))
1079 $(BOARD_SIZE_CHECK)
1080
1081 u-boot.ldr: u-boot
1082 $(CREATE_LDR_ENV)
1083 $(LDR) -T $(CONFIG_CPU) -c $@ $< $(LDR_FLAGS)
1084 $(BOARD_SIZE_CHECK)
1085
1086 # binman
1087 # ---------------------------------------------------------------------------
1088 # Use 'make BINMAN_DEBUG=1' to enable debugging
1089 quiet_cmd_binman = BINMAN $@
1090 cmd_binman = $(srctree)/tools/binman/binman -u -d u-boot.dtb -O . -m \
1091 -I . -I $(srctree) -I $(srctree)/board/$(BOARDDIR) \
1092 $(if $(BINMAN_DEBUG),-D) $(BINMAN_$(@F)) $<
1093
1094 OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex
1095
1096 OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec
1097
1098 u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE
1099 $(call if_changed,objcopy)
1100
1101 #
1102 # U-Boot entry point, needed for booting of full-blown U-Boot
1103 # from the SPL U-Boot version.
1104 #
1105 ifndef CONFIG_SYS_UBOOT_START
1106 CONFIG_SYS_UBOOT_START := 0
1107 endif
1108
1109 # Boards with more complex image requirments can provide an .its source file
1110 # or a generator script
1111 ifneq ($(CONFIG_SPL_FIT_SOURCE),"")
1112 U_BOOT_ITS = $(subst ",,$(CONFIG_SPL_FIT_SOURCE))
1113 else
1114 ifneq ($(CONFIG_SPL_FIT_GENERATOR),"")
1115 U_BOOT_ITS := u-boot.its
1116 ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-rockchip/make_fit_atf.py")
1117 U_BOOT_ITS_DEPS += u-boot
1118 endif
1119 $(U_BOOT_ITS): $(U_BOOT_ITS_DEPS) FORCE
1120 $(srctree)/$(CONFIG_SPL_FIT_GENERATOR) \
1121 $(patsubst %,arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) > $@
1122 endif
1123 endif
1124
1125 ifdef CONFIG_SPL_LOAD_FIT
1126 MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
1127 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
1128 -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
1129 $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST)))
1130 else
1131 MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
1132 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
1133 -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
1134 MKIMAGEFLAGS_u-boot-ivt.img = -A $(ARCH) -T firmware_ivt -C none -O u-boot \
1135 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
1136 -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
1137 u-boot-ivt.img: MKIMAGEOUTPUT = u-boot-ivt.img.log
1138 CLEAN_FILES += u-boot-ivt.img.log u-boot-dtb.imx.log SPL.log u-boot.imx.log
1139 endif
1140
1141 MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img)
1142
1143 MKIMAGEFLAGS_u-boot.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
1144 -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
1145
1146 MKIMAGEFLAGS_u-boot-spl.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
1147 -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
1148 $(if $(KEYDIR),-k $(KEYDIR))
1149
1150 MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
1151 -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
1152
1153 u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
1154 $(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin dts/dt.dtb,u-boot.bin) FORCE
1155 $(call if_changed,mkimage)
1156
1157 u-boot.itb: u-boot-nodtb.bin dts/dt.dtb $(U_BOOT_ITS) FORCE
1158 $(call if_changed,mkfitimage)
1159 $(BOARD_SIZE_CHECK)
1160
1161 u-boot-spl.kwb: u-boot.img spl/u-boot-spl.bin FORCE
1162 $(call if_changed,mkimage)
1163
1164 u-boot.sha1: u-boot.bin
1165 tools/ubsha1 u-boot.bin
1166
1167 u-boot.dis: u-boot
1168 $(OBJDUMP) -d $< > $@
1169
1170 ifneq ($(CONFIG_SPL_PAYLOAD),)
1171 SPL_PAYLOAD := $(CONFIG_SPL_PAYLOAD:"%"=%)
1172 else
1173 SPL_PAYLOAD := u-boot.bin
1174 endif
1175
1176 OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
1177 --pad-to=$(CONFIG_SPL_PAD_TO)
1178 u-boot-with-spl.bin: spl/u-boot-spl.bin $(SPL_PAYLOAD) FORCE
1179 $(call if_changed,pad_cat)
1180
1181 ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy)
1182 MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)
1183
1184 lpc32xx-spl.img: spl/u-boot-spl.bin FORCE
1185 $(call if_changed,mkimage)
1186
1187 OBJCOPYFLAGS_lpc32xx-boot-0.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
1188
1189 lpc32xx-boot-0.bin: lpc32xx-spl.img FORCE
1190 $(call if_changed,objcopy)
1191
1192 OBJCOPYFLAGS_lpc32xx-boot-1.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
1193
1194 lpc32xx-boot-1.bin: lpc32xx-spl.img FORCE
1195 $(call if_changed,objcopy)
1196
1197 lpc32xx-full.bin: lpc32xx-boot-0.bin lpc32xx-boot-1.bin u-boot.img FORCE
1198 $(call if_changed,cat)
1199
1200 CLEAN_FILES += lpc32xx-*
1201 endif
1202
1203 OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \
1204 --pad-to=$(CONFIG_TPL_PAD_TO)
1205 tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE
1206 $(call if_changed,pad_cat)
1207
1208 SPL: spl/u-boot-spl.bin FORCE
1209 $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
1210
1211 u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL u-boot.bin FORCE
1212 $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
1213
1214 MKIMAGEFLAGS_u-boot.ubl = -n $(UBL_CONFIG) -T ublimage -e $(CONFIG_SYS_TEXT_BASE)
1215
1216 u-boot.ubl: u-boot-with-spl.bin FORCE
1217 $(call if_changed,mkimage)
1218
1219 MKIMAGEFLAGS_u-boot-spl.ais = -s -n $(if $(CONFIG_AIS_CONFIG_FILE), \
1220 $(srctree)/$(CONFIG_AIS_CONFIG_FILE:"%"=%),"/dev/null") \
1221 -T aisimage -e $(CONFIG_SPL_TEXT_BASE)
1222 spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE
1223 $(call if_changed,mkimage)
1224
1225 OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
1226 u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE
1227 $(call if_changed,pad_cat)
1228
1229 u-boot-signed.sb: u-boot.bin spl/u-boot-spl.bin
1230 $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot-signed.sb
1231 u-boot.sb: u-boot.bin spl/u-boot-spl.bin
1232 $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb
1233
1234 # On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
1235 # Both images are created using mkimage (crc etc), so that the ROM
1236 # bootloader can check its integrity. Padding needs to be done to the
1237 # SPL image (with mkimage header) and not the binary. Otherwise the resulting image
1238 # which is loaded/copied by the ROM bootloader to SRAM doesn't fit.
1239 # The resulting image containing both U-Boot images is called u-boot.spr
1240 MKIMAGEFLAGS_u-boot-spl.img = -A $(ARCH) -T firmware -C none \
1241 -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER
1242 spl/u-boot-spl.img: spl/u-boot-spl.bin FORCE
1243 $(call if_changed,mkimage)
1244
1245 OBJCOPYFLAGS_u-boot.spr = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
1246 --gap-fill=0xff
1247 u-boot.spr: spl/u-boot-spl.img u-boot.img FORCE
1248 $(call if_changed,pad_cat)
1249
1250 ifneq ($(CONFIG_ARCH_SOCFPGA),)
1251 quiet_cmd_socboot = SOCBOOT $@
1252 cmd_socboot = cat spl/u-boot-spl.sfp spl/u-boot-spl.sfp \
1253 spl/u-boot-spl.sfp spl/u-boot-spl.sfp \
1254 u-boot.img > $@ || rm -f $@
1255 u-boot-with-spl.sfp: spl/u-boot-spl.sfp u-boot.img FORCE
1256 $(call if_changed,socboot)
1257 endif
1258
1259 ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
1260 u-boot-with-dtb.bin: u-boot.bin u-boot.dtb \
1261 $(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR), u-boot-br.bin) FORCE
1262 $(call if_changed,binman)
1263
1264 ifeq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR),y)
1265 OBJCOPYFLAGS_u-boot-br.bin := -O binary -j .bootpg -j .resetvec
1266 u-boot-br.bin: u-boot FORCE
1267 $(call if_changed,objcopy)
1268 endif
1269 endif
1270
1271 # x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including
1272 # reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in
1273 # the middle. This is handled by binman based on an image description in the
1274 # board's device tree.
1275 ifneq ($(CONFIG_X86_RESET_VECTOR),)
1276 rom: u-boot.rom FORCE
1277
1278 refcode.bin: $(srctree)/board/$(BOARDDIR)/refcode.bin FORCE
1279 $(call if_changed,copy)
1280
1281 quiet_cmd_ldr = LD $@
1282 cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \
1283 $(filter-out FORCE,$^) -o $@
1284
1285 u-boot.rom: u-boot-x86-16bit.bin u-boot.bin \
1286 $(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \
1287 $(if $(CONFIG_HAVE_REFCODE),refcode.bin) FORCE
1288 $(call if_changed,binman)
1289
1290 OBJCOPYFLAGS_u-boot-x86-16bit.bin := -O binary -j .start16 -j .resetvec
1291 u-boot-x86-16bit.bin: u-boot FORCE
1292 $(call if_changed,objcopy)
1293 endif
1294
1295 ifneq ($(CONFIG_ARCH_SUNXI),)
1296 ifeq ($(CONFIG_ARM64),)
1297 u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img u-boot.dtb FORCE
1298 $(call if_changed,binman)
1299 else
1300 u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.itb FORCE
1301 $(call if_changed,cat)
1302 endif
1303 endif
1304
1305 ifneq ($(CONFIG_TEGRA),)
1306 ifneq ($(CONFIG_BINMAN),)
1307 # Makes u-boot-dtb-tegra.bin u-boot-tegra.bin u-boot-nodtb-tegra.bin
1308 %-dtb-tegra.bin %-tegra.bin %-nodtb-tegra.bin: \
1309 spl/%-spl %.bin FORCE
1310 $(call if_changed,binman)
1311 else
1312 OBJCOPYFLAGS_u-boot-nodtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
1313 u-boot-nodtb-tegra.bin: spl/u-boot-spl u-boot-nodtb.bin FORCE
1314 $(call if_changed,pad_cat)
1315
1316 OBJCOPYFLAGS_u-boot-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
1317 u-boot-tegra.bin: spl/u-boot-spl u-boot.bin FORCE
1318 $(call if_changed,pad_cat)
1319
1320 u-boot-dtb-tegra.bin: u-boot-tegra.bin FORCE
1321 $(call if_changed,copy)
1322 endif # binman
1323 endif
1324
1325 OBJCOPYFLAGS_u-boot-app.efi := $(OBJCOPYFLAGS_EFI)
1326 u-boot-app.efi: u-boot FORCE
1327 $(call if_changed,zobjcopy)
1328
1329 u-boot.bin.o: u-boot.bin FORCE
1330 $(call if_changed,efipayload)
1331
1332 u-boot-payload.lds: $(LDSCRIPT_EFI) FORCE
1333 $(call if_changed_dep,cpp_lds)
1334
1335 # Rule to link the EFI payload which contains a stub and a U-Boot binary
1336 quiet_cmd_u-boot_payload ?= LD $@
1337 cmd_u-boot_payload ?= $(LD) $(LDFLAGS_EFI_PAYLOAD) -o $@ \
1338 -T u-boot-payload.lds arch/x86/cpu/call32.o \
1339 lib/efi/efi.o lib/efi/efi_stub.o u-boot.bin.o \
1340 $(addprefix arch/$(ARCH)/lib/,$(EFISTUB))
1341
1342 u-boot-payload: u-boot.bin.o u-boot-payload.lds FORCE
1343 $(call if_changed,u-boot_payload)
1344
1345 OBJCOPYFLAGS_u-boot-payload.efi := $(OBJCOPYFLAGS_EFI)
1346 u-boot-payload.efi: u-boot-payload FORCE
1347 $(call if_changed,zobjcopy)
1348
1349 u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE
1350 $(call if_changed,cat)
1351
1352 #Add a target to create boot binary having SPL binary in PBI format
1353 #concatenated with u-boot binary. It is need by PowerPC SoC having
1354 #internal SRAM <= 512KB.
1355 MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
1356 -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage \
1357 -A $(ARCH) -a $(CONFIG_SPL_TEXT_BASE)
1358
1359 spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE
1360 $(call if_changed,mkimage)
1361
1362 ifeq ($(ARCH),arm)
1363 UBOOT_BINLOAD := u-boot.img
1364 else
1365 ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
1366 UBOOT_BINLOAD := u-boot-with-dtb.bin
1367 else
1368 UBOOT_BINLOAD := u-boot.bin
1369 endif
1370 endif
1371
1372 OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
1373 --gap-fill=0xff
1374
1375 u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE
1376 $(call if_changed,pad_cat)
1377
1378 # PPC4xx needs the SPL at the end of the image, since the reset vector
1379 # is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
1380 # and need to introduce a new build target with the full blown U-Boot
1381 # at the start padded up to the start of the SPL image. And then concat
1382 # the SPL image to the end.
1383
1384 OBJCOPYFLAGS_u-boot-img-spl-at-end.bin := -I binary -O binary \
1385 --pad-to=$(CONFIG_UBOOT_PAD_TO) --gap-fill=0xff
1386 u-boot-img-spl-at-end.bin: u-boot.img spl/u-boot-spl.bin FORCE
1387 $(call if_changed,pad_cat)
1388
1389 # Create a new ELF from a raw binary file.
1390 ifndef PLATFORM_ELFENTRY
1391 PLATFORM_ELFENTRY = "_start"
1392 endif
1393 quiet_cmd_u-boot-elf ?= LD $@
1394 cmd_u-boot-elf ?= $(LD) u-boot-elf.o -o $@ \
1395 --defsym=$(PLATFORM_ELFENTRY)=$(CONFIG_SYS_TEXT_BASE) \
1396 -Ttext=$(CONFIG_SYS_TEXT_BASE)
1397 u-boot.elf: u-boot.bin
1398 $(Q)$(OBJCOPY) -I binary $(PLATFORM_ELFFLAGS) $< u-boot-elf.o
1399 $(call if_changed,u-boot-elf)
1400
1401 # MediaTek's ARM-based u-boot needs a header to contains its load address
1402 # which is parsed by the BootROM.
1403 # If the SPL build is enabled, the header will be added to the spl binary,
1404 # and the spl binary and the u-boot.img will be combined into one file.
1405 # Otherwise the header will be added to the u-boot.bin directly.
1406
1407 ifeq ($(CONFIG_SPL),y)
1408 spl/u-boot-spl-mtk.bin: spl/u-boot-spl
1409
1410 u-boot-mtk.bin: u-boot.dtb u-boot.img spl/u-boot-spl-mtk.bin FORCE
1411 $(call if_changed,binman)
1412 else
1413 MKIMAGEFLAGS_u-boot-mtk.bin = -T mtk_image \
1414 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
1415 -n "$(patsubst "%",%,$(CONFIG_MTK_BROM_HEADER_INFO))"
1416
1417 u-boot-mtk.bin: u-boot.bin FORCE
1418 $(call if_changed,mkimage)
1419 endif
1420
1421 ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(ARCH)/Makefile.postlink)
1422
1423 # Rule to link u-boot
1424 # May be overridden by arch/$(ARCH)/config.mk
1425 quiet_cmd_u-boot__ ?= LD $@
1426 cmd_u-boot__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_u-boot) -o $@ \
1427 -T u-boot.lds $(u-boot-init) \
1428 --start-group $(u-boot-main) --end-group \
1429 $(PLATFORM_LIBS) -Map u-boot.map; \
1430 $(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true)
1431
1432 quiet_cmd_smap = GEN common/system_map.o
1433 cmd_smap = \
1434 smap=`$(call SYSTEM_MAP,u-boot) | \
1435 awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
1436 $(CC) $(c_flags) -DSYSTEM_MAP="\"$${smap}\"" \
1437 -c $(srctree)/common/system_map.c -o common/system_map.o
1438
1439 u-boot: $(u-boot-init) $(u-boot-main) u-boot.lds FORCE
1440 +$(call if_changed,u-boot__)
1441 ifeq ($(CONFIG_KALLSYMS),y)
1442 $(call cmd,smap)
1443 $(call cmd,u-boot__) common/system_map.o
1444 endif
1445
1446 ifeq ($(CONFIG_RISCV),y)
1447 @tools/prelink-riscv $@ 0
1448 endif
1449
1450 quiet_cmd_sym ?= SYM $@
1451 cmd_sym ?= $(OBJDUMP) -t $< > $@
1452 u-boot.sym: u-boot FORCE
1453 $(call if_changed,sym)
1454
1455 # The actual objects are generated when descending,
1456 # make sure no implicit rule kicks in
1457 $(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ;
1458
1459 # Handle descending into subdirectories listed in $(vmlinux-dirs)
1460 # Preset locale variables to speed up the build process. Limit locale
1461 # tweaks to this spot to avoid wrong language settings when running
1462 # make menuconfig etc.
1463 # Error messages still appears in the original language
1464
1465 PHONY += $(u-boot-dirs)
1466 $(u-boot-dirs): prepare scripts
1467 $(Q)$(MAKE) $(build)=$@
1468
1469 tools: prepare
1470 # The "tools" are needed early
1471 $(filter-out tools, $(u-boot-dirs)): tools
1472 # The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
1473 # is "yes"), so compile examples after U-Boot is compiled.
1474 examples: $(filter-out examples, $(u-boot-dirs))
1475
1476 define filechk_uboot.release
1477 echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1478 endef
1479
1480 # Store (new) UBOOTRELEASE string in include/config/uboot.release
1481 include/config/uboot.release: include/config/auto.conf FORCE
1482 $(call filechk,uboot.release)
1483
1484
1485 # Things we need to do before we recursively start building the kernel
1486 # or the modules are listed in "prepare".
1487 # A multi level approach is used. prepareN is processed before prepareN-1.
1488 # archprepare is used in arch Makefiles and when processed asm symlink,
1489 # version.h and scripts_basic is processed / created.
1490
1491 # Listed in dependency order
1492 PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
1493
1494 # prepare3 is used to check if we are building in a separate output directory,
1495 # and if so do:
1496 # 1) Check that make has not been executed in the kernel src $(srctree)
1497 prepare3: include/config/uboot.release
1498 ifneq ($(KBUILD_SRC),)
1499 @$(kecho) ' Using $(srctree) as source for U-Boot'
1500 $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
1501 echo >&2 " $(srctree) is not clean, please run 'make mrproper'"; \
1502 echo >&2 " in the '$(srctree)' directory.";\
1503 /bin/false; \
1504 fi;
1505 endif
1506
1507 # prepare2 creates a makefile if using a separate output directory
1508 prepare2: prepare3 outputmakefile
1509
1510 prepare1: prepare2 $(version_h) $(timestamp_h) \
1511 include/config/auto.conf
1512 ifeq ($(wildcard $(LDSCRIPT)),)
1513 @echo >&2 " Could not find linker script."
1514 @/bin/false
1515 endif
1516
1517 ifeq ($(CONFIG_USE_DEFAULT_ENV_FILE),y)
1518 prepare1: $(defaultenv_h)
1519 endif
1520
1521 archprepare: prepare1 scripts_basic
1522
1523 prepare0: archprepare FORCE
1524 $(Q)$(MAKE) $(build)=.
1525
1526 # All the preparing..
1527 prepare: prepare0
1528
1529 # Generate some files
1530 # ---------------------------------------------------------------------------
1531
1532 define filechk_version.h
1533 (echo \#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \
1534 echo \#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \
1535 echo \#define CC_VERSION_STRING \"$$(LC_ALL=C $(CC) --version | head -n 1)\"; \
1536 echo \#define LD_VERSION_STRING \"$$(LC_ALL=C $(LD) --version | head -n 1)\"; )
1537 endef
1538
1539 # The SOURCE_DATE_EPOCH mechanism requires a date that behaves like GNU date.
1540 # The BSD date on the other hand behaves different and would produce errors
1541 # with the misused '-d' switch. Respect that and search a working date with
1542 # well known pre- and suffixes for the GNU variant of date.
1543 define filechk_timestamp.h
1544 (if test -n "$${SOURCE_DATE_EPOCH}"; then \
1545 SOURCE_DATE="@$${SOURCE_DATE_EPOCH}"; \
1546 DATE=""; \
1547 for date in gdate date.gnu date; do \
1548 $${date} -u -d "$${SOURCE_DATE}" >/dev/null 2>&1 && DATE="$${date}"; \
1549 done; \
1550 if test -n "$${DATE}"; then \
1551 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DATE "%b %d %C%y"'; \
1552 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TIME "%T"'; \
1553 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TZ "%z"'; \
1554 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \
1555 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_BUILD_DATE 0x%Y%m%d'; \
1556 else \
1557 return 42; \
1558 fi; \
1559 else \
1560 LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"'; \
1561 LC_ALL=C date +'#define U_BOOT_TIME "%T"'; \
1562 LC_ALL=C date +'#define U_BOOT_TZ "%z"'; \
1563 LC_ALL=C date +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \
1564 LC_ALL=C date +'#define U_BOOT_BUILD_DATE 0x%Y%m%d'; \
1565 fi)
1566 endef
1567
1568 define filechk_defaultenv.h
1569 (grep -v '^#' | \
1570 grep -v '^$$' | \
1571 tr '\n' '\0' | \
1572 sed -e 's/\\\x0/\n/' | \
1573 xxd -i ; echo ", 0x00" ; )
1574 endef
1575
1576 $(version_h): include/config/uboot.release FORCE
1577 $(call filechk,version.h)
1578
1579 $(timestamp_h): $(srctree)/Makefile FORCE
1580 $(call filechk,timestamp.h)
1581
1582 $(defaultenv_h): $(CONFIG_DEFAULT_ENV_FILE:"%"=%) FORCE
1583 $(call filechk,defaultenv.h)
1584
1585 # ---------------------------------------------------------------------------
1586 quiet_cmd_cpp_lds = LDS $@
1587 cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) \
1588 -D__ASSEMBLY__ -x assembler-with-cpp -std=c99 -P -o $@ $<
1589
1590 u-boot.lds: $(LDSCRIPT) prepare FORCE
1591 $(call if_changed_dep,cpp_lds)
1592
1593 spl/u-boot-spl.bin: spl/u-boot-spl
1594 @:
1595 spl/u-boot-spl: tools prepare \
1596 $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb) \
1597 $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_TPL_OF_PLATDATA),dts/dt.dtb)
1598 $(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all
1599
1600 spl/sunxi-spl.bin: spl/u-boot-spl
1601 @:
1602
1603 spl/sunxi-spl-with-ecc.bin: spl/sunxi-spl.bin
1604 @:
1605
1606 spl/u-boot-spl.sfp: spl/u-boot-spl
1607 @:
1608
1609 spl/boot.bin: spl/u-boot-spl
1610 @:
1611
1612 tpl/u-boot-tpl.bin: tools prepare \
1613 $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb)
1614 $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all
1615
1616 TAG_SUBDIRS := $(patsubst %,$(srctree)/%,$(u-boot-dirs) include)
1617
1618 FIND := find
1619 FINDFLAGS := -L
1620
1621 tags ctags:
1622 ctags -w -o ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
1623 -name '*.[chS]' -print`
1624 ln -s ctags tags
1625
1626 etags:
1627 etags -a -o etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
1628 -name '*.[chS]' -print`
1629 cscope:
1630 $(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \
1631 cscope.files
1632 cscope -b -q -k
1633
1634 SYSTEM_MAP = \
1635 $(NM) $1 | \
1636 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
1637 LC_ALL=C sort
1638 System.map: u-boot
1639 @$(call SYSTEM_MAP,$<) > $@
1640
1641 #########################################################################
1642
1643 # ARM relocations should all be R_ARM_RELATIVE (32-bit) or
1644 # R_AARCH64_RELATIVE (64-bit).
1645 checkarmreloc: u-boot
1646 @RELOC="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \
1647 grep R_A | sort -u`"; \
1648 if test "$$RELOC" != "R_ARM_RELATIVE" -a \
1649 "$$RELOC" != "R_AARCH64_RELATIVE"; then \
1650 echo "$< contains unexpected relocations: $$RELOC"; \
1651 false; \
1652 fi
1653
1654 envtools: scripts_basic $(version_h) $(timestamp_h)
1655 $(Q)$(MAKE) $(build)=tools/env
1656
1657 tools-only: scripts_basic $(version_h) $(timestamp_h)
1658 $(Q)$(MAKE) $(build)=tools
1659
1660 tools-all: export HOST_TOOLS_ALL=y
1661 tools-all: envtools tools ;
1662
1663 cross_tools: export CROSS_BUILD_TOOLS=y
1664 cross_tools: tools ;
1665
1666 .PHONY : CHANGELOG
1667 CHANGELOG:
1668 git log --no-merges U-Boot-1_1_5.. | \
1669 unexpand -a | sed -e 's/\s\s*$$//' > $@
1670
1671 #########################################################################
1672
1673 ###
1674 # Cleaning is done on three levels.
1675 # make clean Delete most generated files
1676 # Leave enough to build external modules
1677 # make mrproper Delete the current configuration, and all generated files
1678 # make distclean Remove editor backup files, patch leftover files and the like
1679
1680 # Directories & files removed with 'make clean'
1681 CLEAN_DIRS += $(MODVERDIR) \
1682 $(foreach d, spl tpl, $(patsubst %,$d/%, \
1683 $(filter-out include, $(shell ls -1 $d 2>/dev/null))))
1684
1685 CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h \
1686 boot* u-boot* MLO* SPL System.map fit-dtb.blob
1687
1688 # Directories & files removed with 'make mrproper'
1689 MRPROPER_DIRS += include/config include/generated spl tpl \
1690 .tmp_objdiff
1691 MRPROPER_FILES += .config .config.old include/autoconf.mk* include/config.h \
1692 ctags etags tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS
1693
1694 # clean - Delete most, but leave enough to build external modules
1695 #
1696 clean: rm-dirs := $(CLEAN_DIRS)
1697 clean: rm-files := $(CLEAN_FILES)
1698
1699 clean-dirs := $(foreach f,$(u-boot-alldirs),$(if $(wildcard $(srctree)/$f/Makefile),$f))
1700
1701 clean-dirs := $(addprefix _clean_, $(clean-dirs))
1702
1703 PHONY += $(clean-dirs) clean archclean
1704 $(clean-dirs):
1705 $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
1706
1707 clean: $(clean-dirs)
1708 $(call cmd,rmdirs)
1709 $(call cmd,rmfiles)
1710 @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
1711 \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
1712 -o -name '*.ko.*' -o -name '*.su' \
1713 -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
1714 -o -name '*.lex.c' -o -name '*.tab.[ch]' \
1715 -o -name '*.symtypes' -o -name 'modules.order' \
1716 -o -name modules.builtin -o -name '.tmp_*.o.*' \
1717 -o -name 'dsdt.aml' -o -name 'dsdt.asl.tmp' -o -name 'dsdt.c' \
1718 -o -name '*.efi' -o -name '*.gcno' -o -name '*.so' \) \
1719 -type f -print | xargs rm -f
1720
1721 # mrproper - Delete all generated files, including .config
1722 #
1723 mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS))
1724 mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
1725 mrproper-dirs := $(addprefix _mrproper_,scripts)
1726
1727 PHONY += $(mrproper-dirs) mrproper archmrproper
1728 $(mrproper-dirs):
1729 $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
1730
1731 mrproper: clean $(mrproper-dirs)
1732 $(call cmd,rmdirs)
1733 $(call cmd,rmfiles)
1734 @rm -f arch/*/include/asm/arch
1735
1736 # distclean
1737 #
1738 PHONY += distclean
1739
1740 distclean: mrproper
1741 @find $(srctree) $(RCS_FIND_IGNORE) \
1742 \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
1743 -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
1744 -o -name '.*.rej' -o -name '*%' -o -name 'core' \
1745 -o -name '*.pyc' \) \
1746 -type f -print | xargs rm -f
1747 @rm -f boards.cfg
1748
1749 backup:
1750 F=`basename $(srctree)` ; cd .. ; \
1751 gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
1752
1753 help:
1754 @echo 'Cleaning targets:'
1755 @echo ' clean - Remove most generated files but keep the config'
1756 @echo ' mrproper - Remove all generated files + config + various backup files'
1757 @echo ' distclean - mrproper + remove editor backup and patch files'
1758 @echo ''
1759 @echo 'Configuration targets:'
1760 @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
1761 @echo ''
1762 @echo 'Test targets:'
1763 @echo ''
1764 @echo ' check - Run all automated tests that use sandbox'
1765 @echo ' qcheck - Run quick automated tests that use sandbox'
1766 @echo ''
1767 @echo 'Other generic targets:'
1768 @echo ' all - Build all necessary images depending on configuration'
1769 @echo ' tests - Build U-Boot for sandbox and run tests'
1770 @echo '* u-boot - Build the bare u-boot'
1771 @echo ' dir/ - Build all files in dir and below'
1772 @echo ' dir/file.[oisS] - Build specified target only'
1773 @echo ' dir/file.lst - Build specified mixed source/assembly target only'
1774 @echo ' (requires a recent binutils and recent build (System.map))'
1775 @echo ' tags/ctags - Generate ctags file for editors'
1776 @echo ' etags - Generate etags file for editors'
1777 @echo ' cscope - Generate cscope index'
1778 @echo ' ubootrelease - Output the release version string (use with make -s)'
1779 @echo ' ubootversion - Output the version stored in Makefile (use with make -s)'
1780 @echo " cfg - Don't build, just create the .cfg files"
1781 @echo " envtools - Build only the target-side environment tools"
1782 @echo ''
1783 @echo 'Static analysers'
1784 @echo ' checkstack - Generate a list of stack hogs'
1785 @echo ' coccicheck - Execute static code analysis with Coccinelle'
1786 @echo ''
1787 @echo 'Documentation targets:'
1788 @$(MAKE) -f $(srctree)/Documentation/Makefile dochelp
1789 @echo ''
1790 @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
1791 @echo ' make V=2 [targets] 2 => give reason for rebuild of target'
1792 @echo ' make O=dir [targets] Locate all output files in "dir", including .config'
1793 @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)'
1794 @echo ' make C=2 [targets] Force check of all c source with $$CHECK'
1795 @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
1796 @echo ' make W=n [targets] Enable extra gcc checks, n=1,2,3 where'
1797 @echo ' 1: warnings which may be relevant and do not occur too often'
1798 @echo ' 2: warnings which occur quite often but may still be relevant'
1799 @echo ' 3: more obscure warnings, can most likely be ignored'
1800 @echo ' Multiple levels can be combined with W=12 or W=123'
1801 @echo ''
1802 @echo 'Execute "make" or "make all" to build all targets marked with [*] '
1803 @echo 'For further info see the ./README file'
1804
1805 tests check:
1806 $(srctree)/test/run
1807
1808 qcheck:
1809 $(srctree)/test/run quick
1810
1811 # Documentation targets
1812 # ---------------------------------------------------------------------------
1813 DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \
1814 linkcheckdocs dochelp refcheckdocs
1815 PHONY += $(DOC_TARGETS)
1816 $(DOC_TARGETS): scripts_basic FORCE
1817 $(Q)$(MAKE) $(build)=Documentation $@
1818
1819 endif #ifeq ($(config-targets),1)
1820 endif #ifeq ($(mixed-targets),1)
1821
1822 PHONY += checkstack ubootrelease ubootversion
1823
1824 checkstack:
1825 $(OBJDUMP) -d u-boot $$(find . -name u-boot-spl) | \
1826 $(PERL) $(src)/scripts/checkstack.pl $(ARCH)
1827
1828 ubootrelease:
1829 @echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1830
1831 ubootversion:
1832 @echo $(UBOOTVERSION)
1833
1834 # Single targets
1835 # ---------------------------------------------------------------------------
1836 # Single targets are compatible with:
1837 # - build with mixed source and output
1838 # - build with separate output dir 'make O=...'
1839 # - external modules
1840 #
1841 # target-dir => where to store outputfile
1842 # build-dir => directory in kernel source tree to use
1843
1844 ifeq ($(KBUILD_EXTMOD),)
1845 build-dir = $(patsubst %/,%,$(dir $@))
1846 target-dir = $(dir $@)
1847 else
1848 zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
1849 build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
1850 target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
1851 endif
1852
1853 %.s: %.c prepare scripts FORCE
1854 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1855 %.i: %.c prepare scripts FORCE
1856 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1857 %.o: %.c prepare scripts FORCE
1858 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1859 %.lst: %.c prepare scripts FORCE
1860 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1861 %.s: %.S prepare scripts FORCE
1862 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1863 %.o: %.S prepare scripts FORCE
1864 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1865 %.symtypes: %.c prepare scripts FORCE
1866 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1867
1868 # Modules
1869 /: prepare scripts FORCE
1870 $(cmd_crmodverdir)
1871 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1872 $(build)=$(build-dir)
1873 %/: prepare scripts FORCE
1874 $(cmd_crmodverdir)
1875 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1876 $(build)=$(build-dir)
1877 %.ko: prepare scripts FORCE
1878 $(cmd_crmodverdir)
1879 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1880 $(build)=$(build-dir) $(@:.ko=.o)
1881 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1882
1883 # Consistency checks
1884 # ---------------------------------------------------------------------------
1885
1886 PHONY += coccicheck
1887
1888 coccicheck:
1889 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@
1890
1891 # FIXME Should go into a make.lib or something
1892 # ===========================================================================
1893
1894 quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs)))
1895 cmd_rmdirs = rm -rf $(rm-dirs)
1896
1897 quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)))
1898 cmd_rmfiles = rm -f $(rm-files)
1899
1900 # read all saved command lines
1901
1902 targets := $(wildcard $(sort $(targets)))
1903 cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
1904
1905 ifneq ($(cmd_files),)
1906 $(cmd_files): ; # Do not try to update included dependency files
1907 include $(cmd_files)
1908 endif
1909
1910 endif # skip-makefile
1911
1912 PHONY += FORCE
1913 FORCE:
1914
1915 # Declare the contents of the .PHONY variable as phony. We keep that
1916 # information in a variable so we can use it in if_changed and friends.
1917 .PHONY: $(PHONY)