8 # To see a list of typical targets execute "make help"
9 # More info can be located in ./README
10 # Comments in this file are targeted only to the developer, do not
11 # expect to learn how to build the kernel reading this file.
13 # Do not use make's built-in rules and variables
14 # (this increases performance and avoids hard-to-debug behaviour);
17 # Avoid funny character set dependencies
21 export LC_COLLATE LC_NUMERIC
23 # Avoid interference with shell env settings
26 # We are using a recursive build, so we need to do a little thinking
27 # to get the ordering right.
29 # Most importantly: sub-Makefiles should only ever modify files in
30 # their own directory. If in some directory we have a dependency on
31 # a file in another dir (which doesn't happen often, but it's often
32 # unavoidable when linking the built-in.o targets which finally
33 # turn into vmlinux), we will call a sub make in that other dir, and
34 # after that we are sure that everything which is in that other dir
37 # The only cases where we need to modify files which have global
38 # effects are thus separated out and done before the recursive
39 # descending is started. They are now explicitly listed as the
43 # ---------------------------------------------------------------------------
45 # Normally, we echo the whole command before executing it. By making
46 # that echo $($(quiet)$(cmd)), we now have the possibility to set
47 # $(quiet) to choose other forms of output instead, e.g.
49 # quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
50 # cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
52 # If $(quiet) is empty, the whole command will be printed.
53 # If it is set to "quiet_", only the short version will be printed.
54 # If it is set to "silent_", nothing will be printed at all, since
55 # the variable $(silent_cmd_cc_o_c) doesn't exist.
57 # A simple variant is to prefix commands with $(Q) - that's useful
58 # for commands that shall be hidden in non-verbose mode.
62 # If KBUILD_VERBOSE equals 0 then the above command will be hidden.
63 # If KBUILD_VERBOSE equals 1 then the above command is displayed.
65 # To put more focus on warnings, be less verbose as default
66 # Use 'make V=1' to see the full commands
68 ifeq ("$(origin V)", "command line")
75 ifeq ($(KBUILD_VERBOSE
),1)
83 # If the user is running make -s (silent mode), suppress echoing of
86 ifneq ($(filter 4.
%,$(MAKE_VERSION
)),) # make-4
87 ifneq ($(filter %s
,$(firstword x
$(MAKEFLAGS
))),)
91 ifneq ($(filter s
% -s
%,$(MAKEFLAGS
)),)
96 export quiet Q KBUILD_VERBOSE
98 # kbuild supports saving output files in a separate directory.
99 # To locate output files in a separate directory two syntaxes are supported.
100 # In both cases the working directory must be the root of the kernel src.
102 # Use "make O=dir/to/store/output/files/"
104 # 2) Set KBUILD_OUTPUT
105 # Set the environment variable KBUILD_OUTPUT to point to the directory
106 # where the output files shall be placed.
107 # export KBUILD_OUTPUT=dir/to/store/output/files/
110 # The O= assignment takes precedence over the KBUILD_OUTPUT environment
113 # KBUILD_SRC is set on invocation of make in OBJ directory
114 # KBUILD_SRC is not intended to be used by the regular user (for now)
115 ifeq ($(KBUILD_SRC
),)
117 # OK, Make called in directory where kernel src resides
118 # Do we want to locate output files in a separate directory?
119 ifeq ("$(origin O)", "command line")
120 KBUILD_OUTPUT
:= $(O
)
123 # That's our default target when none is given on the command line
127 # Cancel implicit rules on top Makefile
128 $(CURDIR
)/Makefile Makefile
: ;
130 ifneq ($(KBUILD_OUTPUT
),)
131 # Invoke a second make in the output directory, passing relevant variables
132 # check that the output directory actually exists
133 saved-output
:= $(KBUILD_OUTPUT
)
134 KBUILD_OUTPUT
:= $(shell mkdir
-p
$(KBUILD_OUTPUT
) && cd
$(KBUILD_OUTPUT
) \
136 $(if
$(KBUILD_OUTPUT
),, \
137 $(error failed to create output directory
"$(saved-output)"))
139 PHONY
+= $(MAKECMDGOALS
) sub-make
141 $(filter-out _all sub-make
$(CURDIR
)/Makefile
, $(MAKECMDGOALS
)) _all
: sub-make
145 $(Q
)$(MAKE
) -C
$(KBUILD_OUTPUT
) KBUILD_SRC
=$(CURDIR
) \
146 -f
$(CURDIR
)/Makefile
$(filter-out _all sub-make
,$(MAKECMDGOALS
))
148 # Leave processing to above invocation of make
150 endif # ifneq ($(KBUILD_OUTPUT),)
151 endif # ifeq ($(KBUILD_SRC),)
153 # We process the rest of the Makefile if this is the final invocation of make
154 ifeq ($(skip-makefile
),)
156 # Do not print "Entering directory ...",
157 # but we want to display it when entering to the output directory
158 # so that IDEs/editors are able to understand relative filenames.
159 MAKEFLAGS
+= --no-print-directory
161 # Call a source code checker (by default, "sparse") as part of the
164 # Use 'make C=1' to enable checking of only re-compiled files.
165 # Use 'make C=2' to enable checking of *all* source files, regardless
166 # of whether they are re-compiled or not.
168 # See the file "Documentation/sparse.txt" for more details, including
169 # where to get the "sparse" utility.
171 ifeq ("$(origin C)", "command line")
172 KBUILD_CHECKSRC
= $(C
)
174 ifndef KBUILD_CHECKSRC
178 # Use make M=dir to specify directory of external module to build
179 # Old syntax make ... SUBDIRS=$PWD is still supported
180 # Setting the environment variable KBUILD_EXTMOD take precedence
182 KBUILD_EXTMOD ?
= $(SUBDIRS
)
185 ifeq ("$(origin M)", "command line")
186 KBUILD_EXTMOD
:= $(M
)
189 # If building an external module we do not care about the all: rule
190 # but instead _all depend on modules
192 ifeq ($(KBUILD_EXTMOD
),)
198 ifeq ($(KBUILD_SRC
),)
199 # building in the source tree
202 ifeq ($(KBUILD_SRC
)/,$(dir $(CURDIR
)))
203 # building in a subdirectory of the source tree
206 srctree
:= $(KBUILD_SRC
)
213 VPATH
:= $(srctree
)$(if
$(KBUILD_EXTMOD
),:$(KBUILD_EXTMOD
))
215 export srctree objtree VPATH
217 # Make sure CDPATH settings don't interfere
220 #########################################################################
222 HOSTARCH
:= $(shell uname
-m | \
224 -e s
/sun4u
/sparc64
/ \
227 -e s
/ppc64
/powerpc
/ \
229 -e s
/macppc
/powerpc
/\
232 HOSTOS
:= $(shell uname
-s | tr
'[:upper:]' '[:lower:]' | \
233 sed
-e
's/\(cygwin\).*/cygwin/')
235 export HOSTARCH HOSTOS
237 #########################################################################
239 # set default to nothing for native builds
240 ifeq ($(HOSTARCH
),$(ARCH
))
244 KCONFIG_CONFIG ?
= .config
245 export KCONFIG_CONFIG
247 # SHELL used by kbuild
248 CONFIG_SHELL
:= $(shell if
[ -x
"$$BASH" ]; then echo
$$BASH; \
249 else if
[ -x
/bin
/bash
]; then echo
/bin
/bash
; \
250 else echo sh
; fi
; fi
)
254 HOSTCFLAGS
= -Wall
-Wstrict-prototypes
-O2
-fomit-frame-pointer
257 ifeq ($(HOSTOS
),cygwin
)
261 # Mac OS X / Darwin's C preprocessor is Apple specific. It
262 # generates numerous errors and warnings. We want to bypass it
263 # and use GNU C's cpp. To do this we pass the -traditional-cpp
264 # option to the compiler. Note that the -traditional-cpp flag
265 # DOES NOT have the same semantics as GNU C's flag, all it does
266 # is invoke the GNU preprocessor in stock ANSI/ISO C fashion.
268 # Apple's linker is similar, thanks to the new 2 stage linking
269 # multiple symbol definitions are treated as errors, hence the
270 # -multiply_defined suppress option to turn off this error.
272 ifeq ($(HOSTOS
),darwin
)
273 # get major and minor product version (e.g. '10' and '6' for Snow Leopard)
274 DARWIN_MAJOR_VERSION
= $(shell sw_vers
-productVersion | cut
-f
1 -d
'.')
275 DARWIN_MINOR_VERSION
= $(shell sw_vers
-productVersion | cut
-f
2 -d
'.')
277 os_x_before
= $(shell if
[ $(DARWIN_MAJOR_VERSION
) -le
$(1) -a \
278 $(DARWIN_MINOR_VERSION
) -le
$(2) ] ; then echo
"$(3)"; else echo
"$(4)"; fi
;)
280 # Snow Leopards build environment has no longer restrictions as described above
281 HOSTCC
= $(call os_x_before
, 10, 5, "cc", "gcc")
282 HOSTCFLAGS
+= $(call os_x_before
, 10, 4, "-traditional-cpp")
283 HOSTLDFLAGS
+= $(call os_x_before
, 10, 5, "-multiply_defined suppress")
285 # since Lion (10.7) ASLR is on by default, but we use linker generated lists
286 # in some host tools which is a problem then ... so disable ASLR for these
288 HOSTLDFLAGS
+= $(call os_x_before
, 10, 7, "", "-Xlinker -no_pie")
291 # Decide whether to build built-in, modular, or both.
292 # Normally, just do built-in.
297 # If we have only "make modules", don't compile built-in objects.
298 # When we're building modules with modversions, we need to consider
299 # the built-in objects during the descend as well, in order to
300 # make sure the checksums are up to date before we record them.
302 ifeq ($(MAKECMDGOALS
),modules
)
303 KBUILD_BUILTIN
:= $(if
$(CONFIG_MODVERSIONS
),1)
306 # If we have "make <whatever> modules", compile modules
307 # in addition to whatever we do anyway.
308 # Just "make" or "make all" shall build modules as well
310 # U-Boot does not need modules
311 #ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
312 # KBUILD_MODULES := 1
315 #ifeq ($(MAKECMDGOALS),)
316 # KBUILD_MODULES := 1
319 export KBUILD_MODULES KBUILD_BUILTIN
320 export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
322 # Look for make include files relative to root of kernel src
323 MAKEFLAGS
+= --include-dir
=$(srctree
)
325 # We need some generic definitions (do not try to remake the file).
326 $(srctree
)/scripts
/Kbuild.
include: ;
327 include $(srctree
)/scripts
/Kbuild.
include
329 # Make variables (CC, etc...)
331 AS
= $(CROSS_COMPILE
)as
333 ifneq ($(shell $(CROSS_COMPILE
)ld.bfd
-v
2> /dev
/null
),)
334 LD
= $(CROSS_COMPILE
)ld.bfd
336 LD
= $(CROSS_COMPILE
)ld
338 CC
= $(CROSS_COMPILE
)gcc
340 AR
= $(CROSS_COMPILE
)ar
341 NM
= $(CROSS_COMPILE
)nm
342 LDR
= $(CROSS_COMPILE
)ldr
343 STRIP
= $(CROSS_COMPILE
)strip
344 OBJCOPY
= $(CROSS_COMPILE
)objcopy
345 OBJDUMP
= $(CROSS_COMPILE
)objdump
352 CHECKFLAGS
:= -D__linux__
-Dlinux
-D__STDC__
-Dunix
-D__unix__ \
353 -Wbitwise
-Wno-return-void
-D__CHECK_ENDIAN__
$(CF
)
355 KBUILD_CPPFLAGS
:= -D__KERNEL__
-D__UBOOT__
357 KBUILD_CFLAGS
:= -Wall
-Wstrict-prototypes \
358 -Wno-format-security \
359 -fno-builtin
-ffreestanding
360 KBUILD_AFLAGS
:= -D__ASSEMBLY__
362 # Read UBOOTRELEASE from include/config/uboot.release (if it exists)
363 UBOOTRELEASE
= $(shell cat
include/config
/uboot.release
2> /dev
/null
)
364 UBOOTVERSION
= $(VERSION
)$(if
$(PATCHLEVEL
),.
$(PATCHLEVEL
)$(if
$(SUBLEVEL
),.
$(SUBLEVEL
)))$(EXTRAVERSION
)
366 export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION
367 export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR
368 export CONFIG_SHELL HOSTCC HOSTCFLAGS HOSTLDFLAGS CROSS_COMPILE AS LD CC
369 export CPP AR NM LDR STRIP OBJCOPY OBJDUMP
370 export MAKE AWK PERL PYTHON
371 export HOSTCXX HOSTCXXFLAGS DTC CHECK CHECKFLAGS
373 export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS LDFLAGS
374 export KBUILD_CFLAGS KBUILD_AFLAGS
376 # When compiling out-of-tree modules, put MODVERDIR in the module
377 # tree rather than in the kernel tree. The kernel tree might
379 export MODVERDIR
:= $(if
$(KBUILD_EXTMOD
),$(firstword $(KBUILD_EXTMOD
))/).tmp_versions
381 # Files to ignore in find ... statements
383 export RCS_FIND_IGNORE
:= \
( -name SCCS
-o
-name BitKeeper
-o
-name .svn
-o \
384 -name CVS
-o
-name .
pc -o
-name .hg
-o
-name .git \
) \
386 export RCS_TAR_IGNORE
:= --exclude SCCS
--exclude BitKeeper
--exclude .svn \
387 --exclude CVS
--exclude .
pc --exclude .hg
--exclude .git
389 # ===========================================================================
390 # Rules shared between *config targets and build targets
392 # Basic helpers built in scripts/
393 PHONY
+= scripts_basic
395 $(Q
)$(MAKE
) $(build
)=scripts
/basic
396 $(Q
)rm -f .tmp_quiet_recordmcount
398 # To avoid any implicit rule to kick in, define an empty command.
399 scripts
/basic
/%: scripts_basic
;
401 PHONY
+= outputmakefile
402 # outputmakefile generates a Makefile in the output directory, if using a
403 # separate output directory. This allows convenient use of make in the
406 ifneq ($(KBUILD_SRC
),)
407 $(Q
)ln
-fsn
$(srctree
) source
408 $(Q
)$(CONFIG_SHELL
) $(srctree
)/scripts
/mkmakefile \
409 $(srctree
) $(objtree
) $(VERSION
) $(PATCHLEVEL
)
412 # To make sure we do not include .config for any of the *config targets
413 # catch them early, and hand them over to scripts/kconfig/Makefile
414 # It is allowed to specify more targets when calling make, including
415 # mixing *config targets and build targets.
416 # For example 'make oldconfig all'.
417 # Detect when mixed targets is specified, and make a second invocation
418 # of make so .config is not included in this case either (for *config).
420 version_h
:= include/generated
/version_autogenerated.h
421 timestamp_h
:= include/generated
/timestamp_autogenerated.h
423 no-dot-config-targets
:= clean clobber mrproper
distclean \
424 help
%docs
check% coccicheck \
431 ifneq ($(filter $(no-dot-config-targets
), $(MAKECMDGOALS
)),)
432 ifeq ($(filter-out $(no-dot-config-targets
), $(MAKECMDGOALS
)),)
437 ifeq ($(KBUILD_EXTMOD
),)
438 ifneq ($(filter config
%config
,$(MAKECMDGOALS
)),)
440 ifneq ($(filter-out config
%config
,$(MAKECMDGOALS
)),)
446 ifeq ($(mixed-targets
),1)
447 # ===========================================================================
448 # We're called with mixed targets (*config and build targets).
449 # Handle them one by one.
451 PHONY
+= $(MAKECMDGOALS
) __build_one_by_one
453 $(filter-out __build_one_by_one
, $(MAKECMDGOALS
)): __build_one_by_one
458 for i in
$(MAKECMDGOALS
); do \
459 $(MAKE
) -f
$(srctree
)/Makefile
$$i; \
463 ifeq ($(config-targets
),1)
464 # ===========================================================================
465 # *config targets only - make sure prerequisites are updated, and descend
466 # in scripts/kconfig to make the *config target
468 KBUILD_DEFCONFIG
:= sandbox_defconfig
469 export KBUILD_DEFCONFIG KBUILD_KCONFIG
471 config
: scripts_basic outputmakefile FORCE
472 +$(Q
)$(CONFIG_SHELL
) $(srctree
)/scripts
/multiconfig.sh
$@
474 %config
: scripts_basic outputmakefile FORCE
475 +$(Q
)$(CONFIG_SHELL
) $(srctree
)/scripts
/multiconfig.sh
$@
478 # ===========================================================================
479 # Build targets only - this includes vmlinux, arch specific targets, clean
480 # targets and others. In general all targets except *config targets.
482 ifeq ($(dot-config
),1)
484 -include include/config
/auto.conf
486 # Read in dependencies to all Kconfig* files, make sure to run
487 # oldconfig if changes are detected.
488 -include include/config
/auto.conf.cmd
490 # To avoid any implicit rule to kick in, define an empty command
491 $(KCONFIG_CONFIG
) include/config
/auto.conf.cmd
: ;
493 # If .config is newer than include/config/auto.conf, someone tinkered
494 # with it and forgot to run make oldconfig.
495 # if auto.conf.cmd is missing then we are probably in a cleaned tree so
496 # we execute the config step to be sure to catch updated Kconfig files
497 include/config
/%.conf
: $(KCONFIG_CONFIG
) include/config
/auto.conf.cmd
498 $(Q
)$(MAKE
) -f
$(srctree
)/Makefile silentoldconfig
500 -include include/autoconf.mk
501 -include include/autoconf.mk.dep
503 # We want to include arch/$(ARCH)/config.mk only when include/config/auto.conf
504 # is up-to-date. When we switch to a different board configuration, old CONFIG
505 # macros are still remaining in include/config/auto.conf. Without the following
506 # gimmick, wrong config.mk would be included leading nasty warnings/errors.
507 autoconf_is_current
:= $(if
$(wildcard $(KCONFIG_CONFIG
)),$(shell find . \
508 -path .
/include/config
/auto.conf
-newer
$(KCONFIG_CONFIG
)))
509 ifneq ($(autoconf_is_current
),)
510 include $(srctree
)/config.mk
511 include $(srctree
)/arch
/$(ARCH
)/Makefile
514 # If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
515 # that (or fail if absent). Otherwise, search for a linker script in a
519 #LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug
520 ifdef CONFIG_SYS_LDSCRIPT
521 # need to strip off double quotes
522 LDSCRIPT
:= $(srctree
)/$(CONFIG_SYS_LDSCRIPT
:"%"=%)
526 # If there is no specified link script, we look in a number of places for it
528 ifeq ($(wildcard $(LDSCRIPT
)),)
529 LDSCRIPT
:= $(srctree
)/board
/$(BOARDDIR
)/u-boot.lds
531 ifeq ($(wildcard $(LDSCRIPT
)),)
532 LDSCRIPT
:= $(srctree
)/$(CPUDIR
)/u-boot.lds
534 ifeq ($(wildcard $(LDSCRIPT
)),)
535 LDSCRIPT
:= $(srctree
)/arch
/$(ARCH
)/cpu
/u-boot.lds
540 # Dummy target needed, because used as prerequisite
541 include/config
/auto.conf
: ;
542 endif # $(dot-config)
544 ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
551 KBUILD_CFLAGS
+= -DBUILD_TAG
='"$(BUILD_TAG)"'
554 KBUILD_CFLAGS
+= $(call cc-option
,-fno-stack-protector
)
557 # $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format>
558 # option to the assembler.
561 # Report stack usage if supported
562 ifeq ($(shell $(CONFIG_SHELL
) $(srctree
)/scripts
/gcc-stack-usage.sh
$(CC
)),y
)
563 KBUILD_CFLAGS
+= -fstack-usage
566 KBUILD_CFLAGS
+= $(call cc-option
,-Wno-format-nonliteral
)
568 # turn jbsr into jsr for m68k
570 ifeq ($(findstring 3.4,$(shell $(CC
) --version
)),3.4)
571 KBUILD_AFLAGS
+= -Wa
,-gstabs
,-S
575 # Prohibit date/time macros, which would make the build non-deterministic
576 KBUILD_CFLAGS
+= $(call cc-option
,-Werror
=date-time
)
578 ifneq ($(CONFIG_SYS_TEXT_BASE
),)
579 KBUILD_CPPFLAGS
+= -DCONFIG_SYS_TEXT_BASE
=$(CONFIG_SYS_TEXT_BASE
)
582 export CONFIG_SYS_TEXT_BASE
584 include $(srctree
)/scripts
/Makefile.extrawarn
586 # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
587 KBUILD_CPPFLAGS
+= $(KCPPFLAGS
)
588 KBUILD_AFLAGS
+= $(KAFLAGS
)
589 KBUILD_CFLAGS
+= $(KCFLAGS
)
591 # Use UBOOTINCLUDE when you must reference the include/ directory.
592 # Needed to be compatible with the O= option
595 $(if
$(KBUILD_SRC
), -I
$(srctree
)/include) \
596 -I
$(srctree
)/arch
/$(ARCH
)/include \
597 -include $(srctree
)/include/linux
/kconfig.h
599 NOSTDINC_FLAGS
+= -nostdinc
-isystem
$(shell $(CC
) -print-file-name
=include)
600 CHECKFLAGS
+= $(NOSTDINC_FLAGS
)
603 cpp_flags
:= $(KBUILD_CPPFLAGS
) $(PLATFORM_CPPFLAGS
) $(UBOOTINCLUDE
) \
605 c_flags
:= $(KBUILD_CFLAGS
) $(cpp_flags
)
607 #########################################################################
608 # U-Boot objects....order is important (i.e. start must be first)
610 HAVE_VENDOR_COMMON_LIB
= $(if
$(wildcard $(srctree
)/board
/$(VENDOR
)/common
/Makefile
),y
,n
)
613 libs-
$(HAVE_VENDOR_COMMON_LIB
) += board
/$(VENDOR
)/common
/
614 libs-
$(CONFIG_OF_EMBED
) += dts
/
619 libs-y
+= drivers
/dma
/
620 libs-y
+= drivers
/gpio
/
621 libs-y
+= drivers
/i2c
/
622 libs-y
+= drivers
/mmc
/
623 libs-y
+= drivers
/mtd
/
624 libs-
$(CONFIG_CMD_NAND
) += drivers
/mtd
/nand
/
625 libs-y
+= drivers
/mtd
/onenand
/
626 libs-
$(CONFIG_CMD_UBI
) += drivers
/mtd
/ubi
/
627 libs-y
+= drivers
/mtd
/spi
/
628 libs-y
+= drivers
/net
/
629 libs-y
+= drivers
/net
/phy
/
630 libs-y
+= drivers
/pci
/
631 libs-y
+= drivers
/power
/ \
632 drivers
/power
/fuel_gauge
/ \
634 drivers
/power
/pmic
/ \
635 drivers
/power
/battery
/
636 libs-y
+= drivers
/spi
/
637 libs-
$(CONFIG_FMAN_ENET
) += drivers
/net
/fm
/
638 libs-
$(CONFIG_SYS_FSL_DDR
) += drivers
/ddr
/fsl
/
639 libs-y
+= drivers
/serial
/
640 libs-y
+= drivers
/usb
/eth
/
641 libs-y
+= drivers
/usb
/gadget
/
642 libs-y
+= drivers
/usb
/host
/
643 libs-y
+= drivers
/usb
/musb
/
644 libs-y
+= drivers
/usb
/musb-new
/
645 libs-y
+= drivers
/usb
/phy
/
646 libs-y
+= drivers
/usb
/ulpi
/
648 libs-
$(CONFIG_API
) += api
/
649 libs-
$(CONFIG_HAS_POST
) += post
/
653 libs-y
+= $(if
$(BOARDDIR
),board
/$(BOARDDIR
)/)
655 libs-y
:= $(sort $(libs-y
))
657 u-boot-dirs
:= $(patsubst %/,%,$(filter %/, $(libs-y
))) tools examples
659 u-boot-alldirs
:= $(sort $(u-boot-dirs
) $(patsubst %/,%,$(filter %/, $(libs-
))))
661 libs-y
:= $(patsubst %/, %/built-in.o
, $(libs-y
))
663 u-boot-init
:= $(head-y
)
664 u-boot-main
:= $(libs-y
)
668 ifeq ($(CONFIG_USE_PRIVATE_LIBGCC
),y
)
669 PLATFORM_LIBGCC
= arch
/$(ARCH
)/lib
/lib.a
671 PLATFORM_LIBGCC
:= -L
$(shell dirname
`$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc
673 PLATFORM_LIBS
+= $(PLATFORM_LIBGCC
)
675 export PLATFORM_LIBGCC
677 # Special flags for CPP when processing the linker script.
678 # Pass the version down so we can handle backwards compatibility
681 -include $(srctree
)/include/u-boot
/u-boot.lds.h \
683 $(shell $(LD
) --version | \
684 sed
-ne
's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
686 #########################################################################
687 #########################################################################
689 ifneq ($(CONFIG_BOARD_SIZE_LIMIT
),)
691 @actual
=`wc -c $@ | awk '{print $$1}'`; \
692 limit
=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \
693 if
test $$actual -gt
$$limit; then \
694 echo
"$@ exceeds file size limit:" >&2 ; \
695 echo
" limit: $$limit bytes" >&2 ; \
696 echo
" actual: $$actual bytes" >&2 ; \
697 echo
" excess: $$((actual - limit)) bytes" >&2; \
704 # Statically apply RELA-style relocations (currently arm64 only)
705 ifneq ($(CONFIG_STATIC_RELA
),)
706 # $(1) is u-boot ELF, $(2) is u-boot bin, $(3) is text base
708 start
=$$($(NM
) $(1) | grep __rel_dyn_start | cut
-f
1 -d
' '); \
709 end
=$$($(NM
) $(1) | grep __rel_dyn_end | cut
-f
1 -d
' '); \
710 tools
/relocate-rela
$(2) $(3) $$start $$end
715 # Always append ALL so that arch config.mk's can add custom ones
716 ALL-y
+= u-boot.srec u-boot.bin System.map binary_size_check
718 ALL-
$(CONFIG_ONENAND_U_BOOT
) += u-boot-onenand.bin
719 ifeq ($(CONFIG_SPL_FSL_PBL
),y
)
720 ALL-
$(CONFIG_RAMBOOT_PBL
) += u-boot-with-spl-pbl.bin
722 ALL-
$(CONFIG_RAMBOOT_PBL
) += u-boot.pbl
724 ALL-
$(CONFIG_SPL
) += spl
/u-boot-spl.bin
725 ALL-
$(CONFIG_SPL_FRAMEWORK
) += u-boot.img
726 ALL-
$(CONFIG_TPL
) += tpl
/u-boot-tpl.bin
727 ALL-
$(CONFIG_OF_SEPARATE
) += u-boot.dtb u-boot-dtb.bin
728 ifeq ($(CONFIG_SPL_FRAMEWORK
),y
)
729 ALL-
$(CONFIG_OF_SEPARATE
) += u-boot-dtb.img
731 ALL-
$(CONFIG_OF_HOSTFILE
) += u-boot.dtb
732 ifneq ($(CONFIG_SPL_TARGET
),)
733 ALL-
$(CONFIG_SPL
) += $(CONFIG_SPL_TARGET
:"%"=%)
735 ALL-
$(CONFIG_REMAKE_ELF
) += u-boot.elf
737 ifneq ($(BUILD_ROM
),)
738 ALL-
$(CONFIG_X86_RESET_VECTOR
) += u-boot.rom
741 # enable combined SPL/u-boot/dtb rules for tegra
742 ifneq ($(CONFIG_TEGRA
),)
743 ifeq ($(CONFIG_SPL
),y
)
744 ifeq ($(CONFIG_OF_SEPARATE
),y
)
745 ALL-y
+= u-boot-dtb-tegra.bin
747 ALL-y
+= u-boot-nodtb-tegra.bin
752 # Add optional build target if defined in board/cpu/soc headers
753 ifneq ($(CONFIG_BUILD_TARGET
),)
754 ALL-y
+= $(CONFIG_BUILD_TARGET
:"%"=%)
757 LDFLAGS_u-boot
+= $(LDFLAGS_FINAL
)
758 ifneq ($(CONFIG_SYS_TEXT_BASE
),)
759 LDFLAGS_u-boot
+= -Ttext
$(CONFIG_SYS_TEXT_BASE
)
762 quiet_cmd_objcopy
= OBJCOPY
$@
763 cmd_objcopy
= $(OBJCOPY
) $(OBJCOPYFLAGS
) $(OBJCOPYFLAGS_
$(@F
)) $< $@
765 quiet_cmd_mkimage
= MKIMAGE
$@
766 cmd_mkimage
= $(objtree
)/tools
/mkimage
$(MKIMAGEFLAGS_
$(@F
)) -d
$< $@ \
767 $(if
$(KBUILD_VERBOSE
:1=), >/dev
/null
)
769 quiet_cmd_cat
= CAT
$@
770 cmd_cat
= cat
$(filter-out $(PHONY
), $^
) > $@
772 append
= cat
$(filter-out $< $(PHONY
), $^
) >> $@
774 quiet_cmd_pad_cat
= CAT
$@
775 cmd_pad_cat
= $(cmd_objcopy
) && $(append
) ||
rm -f
$@
778 ifneq ($(CONFIG_SYS_GENERIC_BOARD
),y
)
779 @echo
"===================== WARNING ======================"
780 @echo
"Please convert this board to generic board."
781 @echo
"Otherwise it will be removed by the end of 2014."
782 @echo
"See doc/README.generic-board for further information"
783 @echo
"===================================================="
785 ifeq ($(CONFIG_DM_I2C_COMPAT
),y
)
786 @echo
"===================== WARNING ======================"
787 @echo
"This board uses CONFIG_DM_I2C_COMPAT. Please remove"
788 @echo
"(possibly in a subsequent patch in your series)"
789 @echo
"before sending patches to the mailing list."
790 @echo
"===================================================="
794 dtbs dts
/dt.dtb
: checkdtc u-boot
795 $(Q
)$(MAKE
) $(build
)=dts dtbs
797 u-boot-dtb.bin
: u-boot.bin dts
/dt.dtb FORCE
798 $(call if_changed
,cat
)
801 $(Q
)$(MAKE
) $(build
)=arch
/arm
/imx-common
$@
803 quiet_cmd_copy
= COPY
$@
806 u-boot.dtb
: dts
/dt.dtb
809 OBJCOPYFLAGS_u-boot.hex
:= -O ihex
811 OBJCOPYFLAGS_u-boot.srec
:= -O srec
813 u-boot.hex u-boot.srec
: u-boot FORCE
814 $(call if_changed
,objcopy
)
816 OBJCOPYFLAGS_u-boot.bin
:= -O binary \
817 $(if
$(CONFIG_X86_RESET_VECTOR
),-R .start16
-R .resetvec
)
819 binary_size_check
: u-boot.bin FORCE
820 @file_size
=$(shell wc
-c u-boot.bin | awk
'{print $$1}') ; \
821 map_size
=$(shell cat u-boot.map | \
822 awk
'/_image_copy_start/ {start = $$1} /_image_binary_end/ {end = $$1} END {if (start != "" && end != "") print "ibase=16; " toupper(end) " - " toupper(start)}' \
825 if
[ "" != "$$map_size" ]; then \
826 if
test $$map_size -ne
$$file_size; then \
827 echo
"u-boot.map shows a binary size of $$map_size" >&2 ; \
828 echo
" but u-boot.bin shows $$file_size" >&2 ; \
833 u-boot.bin
: u-boot FORCE
834 $(call if_changed
,objcopy
)
835 $(call DO_STATIC_RELA
,$<,$@
,$(CONFIG_SYS_TEXT_BASE
))
840 $(LDR
) -T
$(CONFIG_CPU
) -c
$@
$< $(LDR_FLAGS
)
843 OBJCOPYFLAGS_u-boot.ldr.hex
:= -I binary
-O ihex
845 OBJCOPYFLAGS_u-boot.ldr.srec
:= -I binary
-O srec
847 u-boot.ldr.hex u-boot.ldr.srec
: u-boot.ldr FORCE
848 $(call if_changed
,objcopy
)
851 # U-Boot entry point, needed for booting of full-blown U-Boot
852 # from the SPL U-Boot version.
854 ifndef CONFIG_SYS_UBOOT_START
855 CONFIG_SYS_UBOOT_START
:= 0
858 MKIMAGEFLAGS_u-boot.img
= -A
$(ARCH
) -T firmware
-C none
-O u-boot \
859 -a
$(CONFIG_SYS_TEXT_BASE
) -e
$(CONFIG_SYS_UBOOT_START
) \
860 -n
"U-Boot $(UBOOTRELEASE) for $(BOARD) board"
862 MKIMAGEFLAGS_u-boot.kwb
= -n
$(srctree
)/$(CONFIG_SYS_KWD_CONFIG
:"%"=%) \
863 -T kwbimage
-a
$(CONFIG_SYS_TEXT_BASE
) -e
$(CONFIG_SYS_TEXT_BASE
)
865 MKIMAGEFLAGS_u-boot-spl.kwb
= -n
$(srctree
)/$(CONFIG_SYS_KWD_CONFIG
:"%"=%) \
866 -T kwbimage
-a
$(CONFIG_SYS_TEXT_BASE
) -e
$(CONFIG_SYS_TEXT_BASE
)
868 MKIMAGEFLAGS_u-boot.pbl
= -n
$(srctree
)/$(CONFIG_SYS_FSL_PBL_RCW
:"%"=%) \
869 -R
$(srctree
)/$(CONFIG_SYS_FSL_PBL_PBI
:"%"=%) -T pblimage
871 u-boot.img u-boot.kwb u-boot.pbl
: u-boot.bin FORCE
872 $(call if_changed
,mkimage
)
874 u-boot-spl.kwb
: u-boot.img spl
/u-boot-spl.bin FORCE
875 $(call if_changed
,mkimage
)
877 MKIMAGEFLAGS_u-boot-dtb.img
= $(MKIMAGEFLAGS_u-boot.img
)
879 u-boot-dtb.img
: u-boot-dtb.bin FORCE
880 $(call if_changed
,mkimage
)
882 u-boot.sha1
: u-boot.bin
883 tools
/ubsha1 u-boot.bin
886 $(OBJDUMP
) -d
$< > $@
889 SPL_PAYLOAD
:= tpl
/u-boot-with-tpl.bin
891 SPL_PAYLOAD
:= u-boot.bin
894 OBJCOPYFLAGS_u-boot-with-spl.bin
= -I binary
-O binary \
895 --pad-to
=$(CONFIG_SPL_PAD_TO
)
896 u-boot-with-spl.bin
: spl
/u-boot-spl.bin
$(SPL_PAYLOAD
) FORCE
897 $(call if_changed
,pad_cat
)
899 OBJCOPYFLAGS_u-boot-with-tpl.bin
= -I binary
-O binary \
900 --pad-to
=$(CONFIG_TPL_PAD_TO
)
901 tpl
/u-boot-with-tpl.bin
: tpl
/u-boot-tpl.bin u-boot.bin FORCE
902 $(call if_changed
,pad_cat
)
904 SPL
: spl
/u-boot-spl.bin FORCE
905 $(Q
)$(MAKE
) $(build
)=arch
/arm
/imx-common
$@
907 u-boot-with-spl.imx u-boot-with-nand-spl.imx
: SPL u-boot.bin FORCE
908 $(Q
)$(MAKE
) $(build
)=arch
/arm
/imx-common
$@
910 MKIMAGEFLAGS_u-boot.ubl
= -n
$(UBL_CONFIG
) -T ublimage
-e
$(CONFIG_SYS_TEXT_BASE
)
912 u-boot.ubl
: u-boot-with-spl.bin FORCE
913 $(call if_changed
,mkimage
)
915 MKIMAGEFLAGS_u-boot-spl.ais
= -s
-n
$(if
$(CONFIG_AIS_CONFIG_FILE
), \
916 $(srctree
)/$(CONFIG_AIS_CONFIG_FILE
:"%"=%),"/dev/null") \
917 -T aisimage
-e
$(CONFIG_SPL_TEXT_BASE
)
918 spl
/u-boot-spl.ais
: spl
/u-boot-spl.bin FORCE
919 $(call if_changed
,mkimage
)
921 OBJCOPYFLAGS_u-boot.ais
= -I binary
-O binary
--pad-to
=$(CONFIG_SPL_PAD_TO
)
922 u-boot.ais
: spl
/u-boot-spl.ais u-boot.img FORCE
923 $(call if_changed
,pad_cat
)
925 u-boot-signed.sb
: u-boot.bin spl
/u-boot-spl.bin
926 $(Q
)$(MAKE
) $(build
)=arch
/arm
/cpu
/arm926ejs
/mxs u-boot-signed.sb
927 u-boot.sb
: u-boot.bin spl
/u-boot-spl.bin
928 $(Q
)$(MAKE
) $(build
)=arch
/arm
/cpu
/arm926ejs
/mxs u-boot.sb
930 # On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
931 # Both images are created using mkimage (crc etc), so that the ROM
932 # bootloader can check its integrity. Padding needs to be done to the
933 # SPL image (with mkimage header) and not the binary. Otherwise the resulting image
934 # which is loaded/copied by the ROM bootloader to SRAM doesn't fit.
935 # The resulting image containing both U-Boot images is called u-boot.spr
936 MKIMAGEFLAGS_u-boot-spl.img
= -A
$(ARCH
) -T firmware
-C none \
937 -a
$(CONFIG_SPL_TEXT_BASE
) -e
$(CONFIG_SPL_TEXT_BASE
) -n XLOADER
938 spl
/u-boot-spl.img
: spl
/u-boot-spl.bin FORCE
939 $(call if_changed
,mkimage
)
941 OBJCOPYFLAGS_u-boot.spr
= -I binary
-O binary
--pad-to
=$(CONFIG_SPL_PAD_TO
) \
943 u-boot.spr
: spl
/u-boot-spl.img u-boot.img FORCE
944 $(call if_changed
,pad_cat
)
946 MKIMAGEFLAGS_u-boot-spl.gph
= -A
$(ARCH
) -T gpimage
-C none \
947 -a
$(CONFIG_SPL_TEXT_BASE
) -e
$(CONFIG_SPL_TEXT_BASE
) -n SPL
948 spl
/u-boot-spl.gph
: spl
/u-boot-spl.bin FORCE
949 $(call if_changed
,mkimage
)
951 OBJCOPYFLAGS_u-boot-spi.gph
= -I binary
-O binary
--pad-to
=$(CONFIG_SPL_PAD_TO
) \
953 u-boot-spi.gph
: spl
/u-boot-spl.gph u-boot.img FORCE
954 $(call if_changed
,pad_cat
)
956 MKIMAGEFLAGS_u-boot-nand.gph
= -A
$(ARCH
) -T gpimage
-C none \
957 -a
$(CONFIG_SYS_TEXT_BASE
) -e
$(CONFIG_SYS_TEXT_BASE
) -n U-Boot
958 u-boot-nand.gph
: u-boot.bin FORCE
959 $(call if_changed
,mkimage
)
960 @dd if
=/dev
/zero bs
=8 count
=1 2>/dev
/null
>> $@
962 # x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including
963 # reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in
965 ifneq ($(CONFIG_X86_RESET_VECTOR
),)
966 rom
: u-boot.rom FORCE
968 IFDTOOL
=$(objtree
)/tools
/ifdtool
969 IFDTOOL_FLAGS
= -f
0:$(objtree
)/u-boot.dtb
970 IFDTOOL_FLAGS
+= -m
0x
$(shell $(NM
) u-boot |grep _dt_ucode_base_size |cut
-d
' ' -f1
)
971 IFDTOOL_FLAGS
+= -U
$(CONFIG_SYS_TEXT_BASE
):$(objtree
)/u-boot.bin
972 IFDTOOL_FLAGS
+= -w
$(CONFIG_SYS_X86_START16
):$(objtree
)/u-boot-x86-16bit.bin
974 ifneq ($(CONFIG_HAVE_INTEL_ME
),)
975 IFDTOOL_ME_FLAGS
= -D
$(srctree
)/board
/$(BOARDDIR
)/descriptor.bin
976 IFDTOOL_ME_FLAGS
+= -i ME
:$(srctree
)/board
/$(BOARDDIR
)/me.bin
979 ifneq ($(CONFIG_HAVE_MRC
),)
980 IFDTOOL_FLAGS
+= -w
$(CONFIG_X86_MRC_ADDR
):$(srctree
)/board
/$(BOARDDIR
)/mrc.bin
983 ifneq ($(CONFIG_HAVE_FSP
),)
984 IFDTOOL_FLAGS
+= -w
$(CONFIG_FSP_ADDR
):$(srctree
)/board
/$(BOARDDIR
)/$(CONFIG_FSP_FILE
)
987 ifneq ($(CONFIG_HAVE_CMC
),)
988 IFDTOOL_FLAGS
+= -w
$(CONFIG_CMC_ADDR
):$(srctree
)/board
/$(BOARDDIR
)/$(CONFIG_CMC_FILE
)
991 ifneq ($(CONFIG_X86_OPTION_ROM_ADDR
),)
992 IFDTOOL_FLAGS
+= -w
$(CONFIG_X86_OPTION_ROM_ADDR
):$(srctree
)/board
/$(BOARDDIR
)/$(CONFIG_X86_OPTION_ROM_FILE
)
995 quiet_cmd_ifdtool
= IFDTOOL
$@
996 cmd_ifdtool
= $(IFDTOOL
) -c
-r
$(CONFIG_ROM_SIZE
) u-boot.tmp
;
997 ifneq ($(CONFIG_HAVE_INTEL_ME
),)
998 cmd_ifdtool
+= $(IFDTOOL
) $(IFDTOOL_ME_FLAGS
) u-boot.tmp
;
1000 cmd_ifdtool
+= $(IFDTOOL
) $(IFDTOOL_FLAGS
) u-boot.tmp
;
1001 cmd_ifdtool
+= mv u-boot.tmp
$@
1003 u-boot.rom
: u-boot-x86-16bit.bin u-boot-dtb.bin
1004 $(call if_changed
,ifdtool
)
1006 OBJCOPYFLAGS_u-boot-x86-16bit.bin
:= -O binary
-j .start16
-j .resetvec
1007 u-boot-x86-16bit.bin
: u-boot FORCE
1008 $(call if_changed
,objcopy
)
1011 ifneq ($(CONFIG_SUNXI
),)
1012 OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin
= -I binary
-O binary \
1013 --pad-to
=$(CONFIG_SPL_PAD_TO
) --gap-fill
=0xff
1014 u-boot-sunxi-with-spl.bin
: spl
/sunxi-spl.bin \
1015 u-boot
$(if
$(CONFIG_OF_CONTROL
),-dtb
,).img FORCE
1016 $(call if_changed
,pad_cat
)
1019 ifneq ($(CONFIG_TEGRA
),)
1020 OBJCOPYFLAGS_u-boot-nodtb-tegra.bin
= -O binary
--pad-to
=$(CONFIG_SYS_TEXT_BASE
)
1021 u-boot-nodtb-tegra.bin
: spl
/u-boot-spl u-boot.bin FORCE
1022 $(call if_changed
,pad_cat
)
1024 ifeq ($(CONFIG_OF_SEPARATE
),y
)
1025 u-boot-dtb-tegra.bin
: u-boot-nodtb-tegra.bin dts
/dt.dtb FORCE
1026 $(call if_changed
,cat
)
1030 u-boot-img.bin
: spl
/u-boot-spl.bin u-boot.img FORCE
1031 $(call if_changed
,cat
)
1033 #Add a target to create boot binary having SPL binary in PBI format
1034 #concatenated with u-boot binary. It is need by PowerPC SoC having
1035 #internal SRAM <= 512KB.
1036 MKIMAGEFLAGS_u-boot-spl.pbl
= -n
$(srctree
)/$(CONFIG_SYS_FSL_PBL_RCW
:"%"=%) \
1037 -R
$(srctree
)/$(CONFIG_SYS_FSL_PBL_PBI
:"%"=%) -T pblimage \
1038 -A
$(ARCH
) -a
$(CONFIG_SPL_TEXT_BASE
)
1040 spl
/u-boot-spl.pbl
: spl
/u-boot-spl.bin FORCE
1041 $(call if_changed
,mkimage
)
1044 UBOOT_BINLOAD
:= u-boot.img
1046 UBOOT_BINLOAD
:= u-boot.bin
1049 OBJCOPYFLAGS_u-boot-with-spl-pbl.bin
= -I binary
-O binary
--pad-to
=$(CONFIG_SPL_PAD_TO
) \
1052 u-boot-with-spl-pbl.bin
: spl
/u-boot-spl.pbl
$(UBOOT_BINLOAD
) FORCE
1053 $(call if_changed
,pad_cat
)
1055 # PPC4xx needs the SPL at the end of the image, since the reset vector
1056 # is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
1057 # and need to introduce a new build target with the full blown U-Boot
1058 # at the start padded up to the start of the SPL image. And then concat
1059 # the SPL image to the end.
1061 OBJCOPYFLAGS_u-boot-img-spl-at-end.bin
:= -I binary
-O binary \
1062 --pad-to
=$(CONFIG_UBOOT_PAD_TO
) --gap-fill
=0xff
1063 u-boot-img-spl-at-end.bin
: u-boot.img spl
/u-boot-spl.bin FORCE
1064 $(call if_changed
,pad_cat
)
1066 # Create a new ELF from a raw binary file. This is useful for arm64
1067 # where static relocation needs to be performed on the raw binary,
1068 # but certain simulators only accept an ELF file (but don't do the
1070 # FIXME refactor dts/Makefile to share target/arch detection
1071 u-boot.elf
: u-boot.bin
1072 @
$(OBJCOPY
) -B aarch64
-I binary
-O elf64-littleaarch64 \
1074 @
$(LD
) u-boot-elf.o
-o
$@ \
1075 --defsym
=_start
=$(CONFIG_SYS_TEXT_BASE
) \
1076 -Ttext
=$(CONFIG_SYS_TEXT_BASE
)
1078 # Rule to link u-boot
1079 # May be overridden by arch/$(ARCH)/config.mk
1080 quiet_cmd_u-boot__ ?
= LD
$@
1081 cmd_u-boot__ ?
= $(LD
) $(LDFLAGS
) $(LDFLAGS_u-boot
) -o
$@ \
1082 -T u-boot.lds
$(u-boot-init
) \
1083 --start-group
$(u-boot-main
) --end-group \
1084 $(PLATFORM_LIBS
) -Map u-boot.map
1086 quiet_cmd_smap
= GEN common
/system_map.o
1088 smap
=`$(call SYSTEM_MAP,u-boot) | \
1089 awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
1090 $(CC
) $(c_flags
) -DSYSTEM_MAP
="\"$${smap}\"" \
1091 -c
$(srctree
)/common
/system_map.c
-o common
/system_map.o
1093 u-boot
: $(u-boot-init
) $(u-boot-main
) u-boot.lds
1094 $(call if_changed
,u-boot__
)
1095 ifeq ($(CONFIG_KALLSYMS
),y
)
1097 $(call cmd
,u-boot__
) common
/system_map.o
1100 # The actual objects are generated when descending,
1101 # make sure no implicit rule kicks in
1102 $(sort $(u-boot-init
) $(u-boot-main
)): $(u-boot-dirs
) ;
1104 # Handle descending into subdirectories listed in $(vmlinux-dirs)
1105 # Preset locale variables to speed up the build process. Limit locale
1106 # tweaks to this spot to avoid wrong language settings when running
1107 # make menuconfig etc.
1108 # Error messages still appears in the original language
1110 PHONY
+= $(u-boot-dirs
)
1111 $(u-boot-dirs
): prepare scripts
1112 $(Q
)$(MAKE
) $(build
)=$@
1115 # The "tools" are needed early
1116 $(filter-out tools
, $(u-boot-dirs
)): tools
1117 # The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
1118 # is "yes"), so compile examples after U-Boot is compiled.
1119 examples
: $(filter-out examples
, $(u-boot-dirs
))
1121 define filechk_uboot.release
1122 echo
"$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1125 # Store (new) UBOOTRELEASE string in include/config/uboot.release
1126 include/config
/uboot.release
: include/config
/auto.conf FORCE
1127 $(call filechk
,uboot.release
)
1130 # Things we need to do before we recursively start building the kernel
1131 # or the modules are listed in "prepare".
1132 # A multi level approach is used. prepareN is processed before prepareN-1.
1133 # archprepare is used in arch Makefiles and when processed asm symlink,
1134 # version.h and scripts_basic is processed / created.
1136 # Listed in dependency order
1137 PHONY
+= prepare archprepare prepare0 prepare1 prepare2 prepare3
1139 # prepare3 is used to check if we are building in a separate output directory,
1141 # 1) Check that make has not been executed in the kernel src $(srctree)
1142 prepare3
: include/config
/uboot.release
1143 ifneq ($(KBUILD_SRC
),)
1144 @
$(kecho
) ' Using $(srctree) as source for U-Boot'
1145 $(Q
)if
[ -f
$(srctree
)/.config
-o
-d
$(srctree
)/include/config
]; then \
1146 echo
>&2 " $(srctree) is not clean, please run 'make mrproper'"; \
1147 echo
>&2 " in the '$(srctree)' directory.";\
1152 # prepare2 creates a makefile if using a separate output directory
1153 prepare2
: prepare3 outputmakefile
1155 prepare1
: prepare2
$(version_h
) $(timestamp_h
) \
1156 include/config
/auto.conf
1157 ifeq ($(__HAVE_ARCH_GENERIC_BOARD
),)
1158 ifeq ($(CONFIG_SYS_GENERIC_BOARD
),y
)
1159 @echo
>&2 " Your architecture does not support generic board."
1160 @echo
>&2 " Please undefine CONFIG_SYS_GENERIC_BOARD in your board config file."
1164 ifeq ($(wildcard $(LDSCRIPT
)),)
1165 @echo
>&2 " Could not find linker script."
1169 archprepare
: prepare1 scripts_basic
1171 prepare0
: archprepare FORCE
1172 $(Q
)$(MAKE
) $(build
)=.
1174 # All the preparing..
1177 # Generate some files
1178 # ---------------------------------------------------------------------------
1180 define filechk_version.h
1181 (echo \
#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \
1182 echo \
#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \
1183 echo \
#define CC_VERSION_STRING \"$$($(CC) --version | head -n 1)\"; \
1184 echo \
#define LD_VERSION_STRING \"$$($(LD) --version | head -n 1)\"; )
1187 define filechk_timestamp.h
1188 (LC_ALL
=C date
+'#define U_BOOT_DATE "%b %d %C%y"'; \
1189 LC_ALL
=C date
+'#define U_BOOT_TIME "%T"')
1192 $(version_h
): include/config
/uboot.release FORCE
1193 $(call filechk
,version.h
)
1195 $(timestamp_h
): $(srctree
)/Makefile FORCE
1196 $(call filechk
,timestamp.h
)
1198 # ---------------------------------------------------------------------------
1202 @echo
'*** Warning: make $@ is unnecessary now.'
1204 # ---------------------------------------------------------------------------
1205 quiet_cmd_cpp_lds
= LDS
$@
1206 cmd_cpp_lds
= $(CPP
) -Wp
,-MD
,$(depfile
) $(cpp_flags
) $(LDPPFLAGS
) -ansi \
1207 -D__ASSEMBLY__
-x assembler-with-cpp
-P
-o
$@
$<
1209 u-boot.lds
: $(LDSCRIPT
) prepare FORCE
1210 $(call if_changed_dep
,cpp_lds
)
1212 spl
/u-boot-spl.bin
: spl
/u-boot-spl
1214 spl
/u-boot-spl
: tools prepare
1215 $(Q
)$(MAKE
) obj
=spl
-f
$(srctree
)/scripts
/Makefile.spl
all
1217 spl
/sunxi-spl.bin
: spl
/u-boot-spl
1220 tpl
/u-boot-tpl.bin
: tools prepare
1221 $(Q
)$(MAKE
) obj
=tpl
-f
$(srctree
)/scripts
/Makefile.spl
all
1223 TAG_SUBDIRS
:= $(patsubst %,$(srctree
)/%,$(u-boot-dirs
) include)
1229 ctags
-w
-o ctags
`$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
1230 -name '*.[chS]' -print`
1233 etags
-a
-o etags
`$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
1234 -name '*.[chS]' -print`
1236 $(FIND
) $(FINDFLAGS
) $(TAG_SUBDIRS
) -name
'*.[chS]' -print > \
1242 grep
-v
'\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
1245 @
$(call SYSTEM_MAP
,$<) > $@
1248 @if
test $(call dtc-version
) -lt
0104; then \
1249 echo
'*** Your dtc is too old, please upgrade to dtc 1.4 or newer'; \
1253 #########################################################################
1255 # ARM relocations should all be R_ARM_RELATIVE (32-bit) or
1256 # R_AARCH64_RELATIVE (64-bit).
1257 checkarmreloc
: u-boot
1258 @RELOC
="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \
1259 grep R_A | sort -u`"; \
1260 if
test "$$RELOC" != "R_ARM_RELATIVE" -a \
1261 "$$RELOC" != "R_AARCH64_RELATIVE"; then \
1262 echo
"$< contains unexpected relocations: $$RELOC"; \
1267 $(Q
)$(MAKE
) $(build
)=tools
/$@
1269 tools-only
: scripts_basic
$(version_h
) $(timestamp_h
)
1270 $(Q
)$(MAKE
) $(build
)=tools
1272 tools-all
: export HOST_TOOLS_ALL
=y
1273 tools-all
: env tools
;
1275 cross_tools
: export CROSS_BUILD_TOOLS
=y
1276 cross_tools
: tools
;
1280 git log
--no-merges U-Boot-1_1_5.. | \
1281 unexpand
-a | sed
-e
's/\s\s*$$//' > $@
1283 include/license.h
: tools
/bin2header COPYING
1284 cat COPYING | gzip
-9 -c | .
/tools
/bin2header license_gzip
> include/license.h
1285 #########################################################################
1288 # Cleaning is done on three levels.
1289 # make clean Delete most generated files
1290 # Leave enough to build external modules
1291 # make mrproper Delete the current configuration, and all generated files
1292 # make distclean Remove editor backup files, patch leftover files and the like
1294 # Directories & files removed with 'make clean'
1295 CLEAN_DIRS
+= $(MODVERDIR
) \
1296 $(foreach d
, spl tpl
, $(patsubst %,$d/%, \
1297 $(filter-out include, $(shell ls
-1 $d 2>/dev
/null
))))
1299 CLEAN_FILES
+= include/bmp_logo.h
include/bmp_logo_data.h \
1300 boot
* u-boot
* MLO
* SPL System.map
1302 # Directories & files removed with 'make mrproper'
1303 MRPROPER_DIRS
+= include/config
include/generated spl tpl \
1305 MRPROPER_FILES
+= .config .config.old
include/autoconf.mk
* include/config.h \
1306 ctags etags TAGS cscope
* GPATH GTAGS GRTAGS GSYMS
1308 # clean - Delete most, but leave enough to build external modules
1310 clean: rm-dirs
:= $(CLEAN_DIRS
)
1311 clean: rm-files
:= $(CLEAN_FILES
)
1313 clean-dirs
:= $(foreach f
,$(u-boot-alldirs
),$(if
$(wildcard $(srctree
)/$f/Makefile
),$f))
1315 clean-dirs
:= $(addprefix _clean_
, $(clean-dirs
) doc
/DocBook
)
1317 PHONY
+= $(clean-dirs
) clean archclean
1319 $(Q
)$(MAKE
) $(clean)=$(patsubst _clean_
%,%,$@
)
1321 # TODO: Do not use *.cfgtmp
1322 clean: $(clean-dirs
)
1325 @find
$(if
$(KBUILD_EXTMOD
), $(KBUILD_EXTMOD
), .
) $(RCS_FIND_IGNORE
) \
1326 \
( -name
'*.[oas]' -o
-name
'*.ko' -o
-name
'.*.cmd' \
1327 -o
-name
'*.ko.*' -o
-name
'*.su' -o
-name
'*.cfgtmp' \
1328 -o
-name
'.*.d' -o
-name
'.*.tmp' -o
-name
'*.mod.c' \
1329 -o
-name
'*.symtypes' -o
-name
'modules.order' \
1330 -o
-name modules.builtin
-o
-name
'.tmp_*.o.*' \
1331 -o
-name
'*.gcno' \
) -type f
-print | xargs
rm -f
1333 # mrproper - Delete all generated files, including .config
1335 mrproper
: rm-dirs
:= $(wildcard $(MRPROPER_DIRS
))
1336 mrproper
: rm-files
:= $(wildcard $(MRPROPER_FILES
))
1337 mrproper-dirs
:= $(addprefix _mrproper_
,scripts
)
1339 PHONY
+= $(mrproper-dirs
) mrproper archmrproper
1341 $(Q
)$(MAKE
) $(clean)=$(patsubst _mrproper_
%,%,$@
)
1343 mrproper
: clean $(mrproper-dirs
)
1346 @
rm -f arch
/*/include/asm
/arch
1353 @find
$(srctree
) $(RCS_FIND_IGNORE
) \
1354 \
( -name
'*.orig' -o
-name
'*.rej' -o
-name
'*~' \
1355 -o
-name
'*.bak' -o
-name
'#*#' -o
-name
'.*.orig' \
1356 -o
-name
'.*.rej' -o
-name
'*%' -o
-name
'core' \
1357 -o
-name
'*.pyc' \
) \
1358 -type f
-print | xargs
rm -f
1362 F
=`basename $(srctree)` ; cd ..
; \
1363 gtar
--force-local
-zcvf
`LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
1366 @echo
'Cleaning targets:'
1367 @echo
' clean - Remove most generated files but keep the config'
1368 @echo
' mrproper - Remove all generated files + config + various backup files'
1369 @echo
' distclean - mrproper + remove editor backup and patch files'
1371 @echo
'Configuration targets:'
1372 @
$(MAKE
) -f
$(srctree
)/scripts
/kconfig
/Makefile help
1374 @echo
'Other generic targets:'
1375 @echo
' all - Build all necessary images depending on configuration'
1376 @echo
'* u-boot - Build the bare u-boot'
1377 @echo
' dir/ - Build all files in dir and below'
1378 @echo
' dir/file.[oisS] - Build specified target only'
1379 @echo
' dir/file.lst - Build specified mixed source/assembly target only'
1380 @echo
' (requires a recent binutils and recent build (System.map))'
1381 @echo
' tags/ctags - Generate ctags file for editors'
1382 @echo
' etags - Generate etags file for editors'
1383 @echo
' cscope - Generate cscope index'
1384 @echo
' ubootrelease - Output the release version string (use with make -s)'
1385 @echo
' ubootversion - Output the version stored in Makefile (use with make -s)'
1387 @echo
'Static analysers'
1388 @echo
' checkstack - Generate a list of stack hogs'
1390 @echo
'Documentation targets:'
1391 @
$(MAKE
) -f
$(srctree
)/doc
/DocBook
/Makefile dochelp
1393 @echo
' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
1394 @echo
' make V=2 [targets] 2 => give reason for rebuild of target'
1395 @echo
' make O=dir [targets] Locate all output files in "dir", including .config'
1396 @echo
' make C=1 [targets] Check all c source with $$CHECK (sparse by default)'
1397 @echo
' make C=2 [targets] Force check of all c source with $$CHECK'
1398 @echo
' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
1399 @echo
' make W=n [targets] Enable extra gcc checks, n=1,2,3 where'
1400 @echo
' 1: warnings which may be relevant and do not occur too often'
1401 @echo
' 2: warnings which occur quite often but may still be relevant'
1402 @echo
' 3: more obscure warnings, can most likely be ignored'
1403 @echo
' Multiple levels can be combined with W=12 or W=123'
1405 @echo
'Execute "make" or "make all" to build all targets marked with [*] '
1406 @echo
'For further info see the ./README file'
1409 # Documentation targets
1410 # ---------------------------------------------------------------------------
1411 %docs
: scripts_basic FORCE
1412 $(Q
)$(MAKE
) $(build
)=scripts build_docproc
1413 $(Q
)$(MAKE
) $(build
)=doc
/DocBook
$@
1416 PHONY
+= prepare scripts
1420 endif #ifeq ($(config-targets),1)
1421 endif #ifeq ($(mixed-targets),1)
1423 PHONY
+= checkstack ubootrelease ubootversion
1426 $(OBJDUMP
) -d u-boot
$$(find .
-name u-boot-spl
) | \
1427 $(PERL
) $(src
)/scripts
/checkstack.pl
$(ARCH
)
1430 @echo
"$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1433 @echo
$(UBOOTVERSION
)
1436 # ---------------------------------------------------------------------------
1437 # Single targets are compatible with:
1438 # - build with mixed source and output
1439 # - build with separate output dir 'make O=...'
1440 # - external modules
1442 # target-dir => where to store outputfile
1443 # build-dir => directory in kernel source tree to use
1445 ifeq ($(KBUILD_EXTMOD
),)
1446 build-dir
= $(patsubst %/,%,$(dir $@
))
1447 target-dir
= $(dir $@
)
1449 zap-slash
=$(filter-out .
,$(patsubst %/,%,$(dir $@
)))
1450 build-dir
= $(KBUILD_EXTMOD
)$(if
$(zap-slash
),/$(zap-slash
))
1451 target-dir
= $(if
$(KBUILD_EXTMOD
),$(dir $<),$(dir $@
))
1454 %.s
: %.c prepare scripts FORCE
1455 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(target-dir
)$(notdir $@
)
1456 %.i
: %.c prepare scripts FORCE
1457 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(target-dir
)$(notdir $@
)
1458 %.o
: %.c prepare scripts FORCE
1459 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(target-dir
)$(notdir $@
)
1460 %.lst
: %.c prepare scripts FORCE
1461 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(target-dir
)$(notdir $@
)
1462 %.s
: %.S prepare scripts FORCE
1463 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(target-dir
)$(notdir $@
)
1464 %.o
: %.S prepare scripts FORCE
1465 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(target-dir
)$(notdir $@
)
1466 %.symtypes
: %.c prepare scripts FORCE
1467 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(target-dir
)$(notdir $@
)
1470 /: prepare scripts FORCE
1472 $(Q
)$(MAKE
) KBUILD_MODULES
=$(if
$(CONFIG_MODULES
),1) \
1473 $(build
)=$(build-dir
)
1474 %/: prepare scripts FORCE
1476 $(Q
)$(MAKE
) KBUILD_MODULES
=$(if
$(CONFIG_MODULES
),1) \
1477 $(build
)=$(build-dir
)
1478 %.ko
: prepare scripts FORCE
1480 $(Q
)$(MAKE
) KBUILD_MODULES
=$(if
$(CONFIG_MODULES
),1) \
1481 $(build
)=$(build-dir
) $(@
:.ko
=.o
)
1482 $(Q
)$(MAKE
) -f
$(srctree
)/scripts
/Makefile.modpost
1484 # FIXME Should go into a make.lib or something
1485 # ===========================================================================
1487 quiet_cmd_rmdirs
= $(if
$(wildcard $(rm-dirs
)),CLEAN
$(wildcard $(rm-dirs
)))
1488 cmd_rmdirs
= rm -rf
$(rm-dirs
)
1490 quiet_cmd_rmfiles
= $(if
$(wildcard $(rm-files
)),CLEAN
$(wildcard $(rm-files
)))
1491 cmd_rmfiles
= rm -f
$(rm-files
)
1493 # read all saved command lines
1495 targets
:= $(wildcard $(sort $(targets
)))
1496 cmd_files
:= $(wildcard .
*.cmd
$(foreach f
,$(targets
),$(dir $(f
)).
$(notdir $(f
)).cmd
))
1498 ifneq ($(cmd_files
),)
1499 $(cmd_files
): ; # Do not try to update included dependency files
1500 include $(cmd_files
)
1503 # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
1505 # $(Q)$(MAKE) $(clean)=dir
1506 clean := -f
$(srctree
)/scripts
/Makefile.
clean obj
1508 endif # skip-makefile
1513 # Declare the contents of the .PHONY variable as phony. We keep that
1514 # information in a variable so we can use it in if_changed and friends.