2 # (C) Copyright 2000-2013
3 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5 # SPDX-License-Identifier: GPL-2.0+
15 # To see a list of typical targets execute "make help"
16 # More info can be located in ./README
17 # Comments in this file are targeted only to the developer, do not
18 # expect to learn how to build the kernel reading this file.
21 # o use make's built-in rules and variables
22 # (this increases performance and avoids hard-to-debug behaviour);
23 # o print "Entering directory ...";
24 MAKEFLAGS
+= -rR
--no-print-directory
26 # Avoid funny character set dependencies
30 export LC_COLLATE LC_NUMERIC
32 # We are using a recursive build, so we need to do a little thinking
33 # to get the ordering right.
35 # Most importantly: sub-Makefiles should only ever modify files in
36 # their own directory. If in some directory we have a dependency on
37 # a file in another dir (which doesn't happen often, but it's often
38 # unavoidable when linking the built-in.o targets which finally
39 # turn into vmlinux), we will call a sub make in that other dir, and
40 # after that we are sure that everything which is in that other dir
43 # The only cases where we need to modify files which have global
44 # effects are thus separated out and done before the recursive
45 # descending is started. They are now explicitly listed as the
48 # To put more focus on warnings, be less verbose as default
49 # Use 'make V=1' to see the full commands
51 ifeq ("$(origin V)", "command line")
58 # Call a source code checker (by default, "sparse") as part of the
61 # Use 'make C=1' to enable checking of only re-compiled files.
62 # Use 'make C=2' to enable checking of *all* source files, regardless
63 # of whether they are re-compiled or not.
65 # See the file "Documentation/sparse.txt" for more details, including
66 # where to get the "sparse" utility.
68 ifeq ("$(origin C)", "command line")
69 KBUILD_CHECKSRC
= $(C
)
71 ifndef KBUILD_CHECKSRC
75 # Use make M=dir to specify directory of external module to build
76 # Old syntax make ... SUBDIRS=$PWD is still supported
77 # Setting the environment variable KBUILD_EXTMOD take precedence
79 KBUILD_EXTMOD ?
= $(SUBDIRS
)
82 ifeq ("$(origin M)", "command line")
86 # kbuild supports saving output files in a separate directory.
87 # To locate output files in a separate directory two syntaxes are supported.
88 # In both cases the working directory must be the root of the kernel src.
90 # Use "make O=dir/to/store/output/files/"
92 # 2) Set KBUILD_OUTPUT
93 # Set the environment variable KBUILD_OUTPUT to point to the directory
94 # where the output files shall be placed.
95 # export KBUILD_OUTPUT=dir/to/store/output/files/
98 # The O= assignment takes precedence over the KBUILD_OUTPUT environment
102 # KBUILD_SRC is set on invocation of make in OBJ directory
103 # KBUILD_SRC is not intended to be used by the regular user (for now)
104 ifeq ($(KBUILD_SRC
),)
106 # OK, Make called in directory where kernel src resides
107 # Do we want to locate output files in a separate directory?
108 ifeq ("$(origin O)", "command line")
109 KBUILD_OUTPUT
:= $(O
)
112 ifeq ("$(origin W)", "command line")
113 export KBUILD_ENABLE_EXTRA_GCC_CHECKS
:= $(W
)
116 # That's our default target when none is given on the command line
120 # Cancel implicit rules on top Makefile
121 $(CURDIR
)/Makefile Makefile
: ;
123 ifneq ($(KBUILD_OUTPUT
),)
124 # Invoke a second make in the output directory, passing relevant variables
125 # check that the output directory actually exists
126 saved-output
:= $(KBUILD_OUTPUT
)
127 KBUILD_OUTPUT
:= $(shell mkdir
-p
$(KBUILD_OUTPUT
) && cd
$(KBUILD_OUTPUT
) \
129 $(if
$(KBUILD_OUTPUT
),, \
130 $(error failed to create output directory
"$(saved-output)"))
132 PHONY
+= $(MAKECMDGOALS
) sub-make
134 $(filter-out _all sub-make
$(CURDIR
)/Makefile
, $(MAKECMDGOALS
)) _all
: sub-make
138 $(if
$(KBUILD_VERBOSE
:1=),@
)$(MAKE
) -C
$(KBUILD_OUTPUT
) \
139 KBUILD_SRC
=$(CURDIR
) \
140 KBUILD_EXTMOD
="$(KBUILD_EXTMOD)" -f
$(CURDIR
)/Makefile \
141 $(filter-out _all sub-make
,$(MAKECMDGOALS
))
143 # Leave processing to above invocation of make
145 endif # ifneq ($(KBUILD_OUTPUT),)
146 endif # ifeq ($(KBUILD_SRC),)
148 # We process the rest of the Makefile if this is the final invocation of make
149 ifeq ($(skip-makefile
),)
151 # If building an external module we do not care about the all: rule
152 # but instead _all depend on modules
154 ifeq ($(KBUILD_EXTMOD
),)
160 srctree
:= $(if
$(KBUILD_SRC
),$(KBUILD_SRC
),$(CURDIR
))
165 VPATH
:= $(srctree
)$(if
$(KBUILD_EXTMOD
),:$(KBUILD_EXTMOD
))
167 export srctree objtree VPATH
169 MKCONFIG
:= $(srctree
)/mkconfig
172 # Make sure CDPATH settings don't interfere
175 #########################################################################
177 HOSTARCH
:= $(shell uname
-m | \
179 -e s
/sun4u
/sparc64
/ \
182 -e s
/ppc64
/powerpc
/ \
184 -e s
/macppc
/powerpc
/\
187 HOSTOS
:= $(shell uname
-s | tr
'[:upper:]' '[:lower:]' | \
188 sed
-e
's/\(cygwin\).*/cygwin/')
190 export HOSTARCH HOSTOS
192 # Deal with colliding definitions from tcsh etc.
195 #########################################################################
197 # set default to nothing for native builds
198 ifeq ($(HOSTARCH
),$(ARCH
))
202 # SHELL used by kbuild
203 CONFIG_SHELL
:= $(shell if
[ -x
"$$BASH" ]; then echo
$$BASH; \
204 else if
[ -x
/bin
/bash
]; then echo
/bin
/bash
; \
205 else echo sh
; fi
; fi
)
209 HOSTCFLAGS
= -Wall
-Wstrict-prototypes
-O2
-fomit-frame-pointer
212 ifeq ($(HOSTOS
),cygwin
)
216 # Mac OS X / Darwin's C preprocessor is Apple specific. It
217 # generates numerous errors and warnings. We want to bypass it
218 # and use GNU C's cpp. To do this we pass the -traditional-cpp
219 # option to the compiler. Note that the -traditional-cpp flag
220 # DOES NOT have the same semantics as GNU C's flag, all it does
221 # is invoke the GNU preprocessor in stock ANSI/ISO C fashion.
223 # Apple's linker is similar, thanks to the new 2 stage linking
224 # multiple symbol definitions are treated as errors, hence the
225 # -multiply_defined suppress option to turn off this error.
227 ifeq ($(HOSTOS
),darwin
)
228 # get major and minor product version (e.g. '10' and '6' for Snow Leopard)
229 DARWIN_MAJOR_VERSION
= $(shell sw_vers
-productVersion | cut
-f
1 -d
'.')
230 DARWIN_MINOR_VERSION
= $(shell sw_vers
-productVersion | cut
-f
2 -d
'.')
232 os_x_before
= $(shell if
[ $(DARWIN_MAJOR_VERSION
) -le
$(1) -a \
233 $(DARWIN_MINOR_VERSION
) -le
$(2) ] ; then echo
"$(3)"; else echo
"$(4)"; fi
;)
235 # Snow Leopards build environment has no longer restrictions as described above
236 HOSTCC
= $(call os_x_before
, 10, 5, "cc", "gcc")
237 HOSTCFLAGS
+= $(call os_x_before
, 10, 4, "-traditional-cpp")
238 HOSTLDFLAGS
+= $(call os_x_before
, 10, 5, "-multiply_defined suppress")
241 # Decide whether to build built-in, modular, or both.
242 # Normally, just do built-in.
247 # If we have only "make modules", don't compile built-in objects.
248 # When we're building modules with modversions, we need to consider
249 # the built-in objects during the descend as well, in order to
250 # make sure the checksums are up to date before we record them.
252 ifeq ($(MAKECMDGOALS
),modules
)
253 KBUILD_BUILTIN
:= $(if
$(CONFIG_MODVERSIONS
),1)
256 # If we have "make <whatever> modules", compile modules
257 # in addition to whatever we do anyway.
258 # Just "make" or "make all" shall build modules as well
260 # U-Boot does not need modules
261 #ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
262 # KBUILD_MODULES := 1
265 #ifeq ($(MAKECMDGOALS),)
266 # KBUILD_MODULES := 1
269 export KBUILD_MODULES KBUILD_BUILTIN
270 export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
273 # ---------------------------------------------------------------------------
275 # Normally, we echo the whole command before executing it. By making
276 # that echo $($(quiet)$(cmd)), we now have the possibility to set
277 # $(quiet) to choose other forms of output instead, e.g.
279 # quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
280 # cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
282 # If $(quiet) is empty, the whole command will be printed.
283 # If it is set to "quiet_", only the short version will be printed.
284 # If it is set to "silent_", nothing will be printed at all, since
285 # the variable $(silent_cmd_cc_o_c) doesn't exist.
287 # A simple variant is to prefix commands with $(Q) - that's useful
288 # for commands that shall be hidden in non-verbose mode.
292 # If KBUILD_VERBOSE equals 0 then the above command will be hidden.
293 # If KBUILD_VERBOSE equals 1 then the above command is displayed.
295 ifeq ($(KBUILD_VERBOSE
),1)
303 # If the user is running make -s (silent mode), suppress echoing of
306 ifneq ($(filter 4.
%,$(MAKE_VERSION
)),) # make-4
307 ifneq ($(filter %s
,$(firstword x
$(MAKEFLAGS
))),)
311 ifneq ($(filter s
% -s
%,$(MAKEFLAGS
)),)
316 export quiet Q KBUILD_VERBOSE
318 # Look for make include files relative to root of kernel src
319 MAKEFLAGS
+= --include-dir
=$(srctree
)
321 # We need some generic definitions (do not try to remake the file).
322 $(srctree
)/scripts
/Kbuild.
include: ;
323 include $(srctree
)/scripts
/Kbuild.
include
325 # Make variables (CC, etc...)
327 AS
= $(CROSS_COMPILE
)as
329 ifneq ($(shell $(CROSS_COMPILE
)ld.bfd
-v
2> /dev
/null
),)
330 LD
= $(CROSS_COMPILE
)ld.bfd
332 LD
= $(CROSS_COMPILE
)ld
334 CC
= $(CROSS_COMPILE
)gcc
336 AR
= $(CROSS_COMPILE
)ar
337 NM
= $(CROSS_COMPILE
)nm
338 LDR
= $(CROSS_COMPILE
)ldr
339 STRIP
= $(CROSS_COMPILE
)strip
340 OBJCOPY
= $(CROSS_COMPILE
)objcopy
341 OBJDUMP
= $(CROSS_COMPILE
)objdump
347 CHECKFLAGS
:= -D__linux__
-Dlinux
-D__STDC__
-Dunix
-D__unix__ \
348 -Wbitwise
-Wno-return-void
-D__CHECK_ENDIAN__
$(CF
)
350 KBUILD_CPPFLAGS
:= -D__KERNEL__
352 KBUILD_CFLAGS
:= -Wall
-Wstrict-prototypes \
353 -Wno-format-security \
354 -fno-builtin
-ffreestanding
355 KBUILD_AFLAGS
:= -D__ASSEMBLY__
357 # Read UBOOTRELEASE from include/config/uboot.release (if it exists)
358 UBOOTRELEASE
= $(shell cat
include/config
/uboot.release
2> /dev
/null
)
359 UBOOTVERSION
= $(VERSION
)$(if
$(PATCHLEVEL
),.
$(PATCHLEVEL
)$(if
$(SUBLEVEL
),.
$(SUBLEVEL
)))$(EXTRAVERSION
)
361 export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION
362 export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR
363 export CONFIG_SHELL HOSTCC HOSTCFLAGS HOSTLDFLAGS CROSS_COMPILE AS LD CC
364 export CPP AR NM LDR STRIP OBJCOPY OBJDUMP
366 export HOSTCXX HOSTCXXFLAGS DTC CHECK CHECKFLAGS
368 export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS LDFLAGS
369 export KBUILD_CFLAGS KBUILD_AFLAGS
371 # When compiling out-of-tree modules, put MODVERDIR in the module
372 # tree rather than in the kernel tree. The kernel tree might
374 export MODVERDIR
:= $(if
$(KBUILD_EXTMOD
),$(firstword $(KBUILD_EXTMOD
))/).tmp_versions
376 # Files to ignore in find ... statements
378 export RCS_FIND_IGNORE
:= \
( -name SCCS
-o
-name BitKeeper
-o
-name .svn
-o \
379 -name CVS
-o
-name .
pc -o
-name .hg
-o
-name .git \
) \
381 export RCS_TAR_IGNORE
:= --exclude SCCS
--exclude BitKeeper
--exclude .svn \
382 --exclude CVS
--exclude .
pc --exclude .hg
--exclude .git
384 # ===========================================================================
385 # Rules shared between *config targets and build targets
387 # Basic helpers built in scripts/
388 PHONY
+= scripts_basic
390 $(Q
)$(MAKE
) $(build
)=scripts
/basic
391 $(Q
)rm -f .tmp_quiet_recordmcount
393 # To avoid any implicit rule to kick in, define an empty command.
394 scripts
/basic
/%: scripts_basic
;
396 PHONY
+= outputmakefile
397 # outputmakefile generates a Makefile in the output directory, if using a
398 # separate output directory. This allows convenient use of make in the
401 ifneq ($(KBUILD_SRC
),)
402 $(Q
)ln
-fsn
$(srctree
) source
403 $(Q
)$(CONFIG_SHELL
) $(srctree
)/scripts
/mkmakefile \
404 $(srctree
) $(objtree
) $(VERSION
) $(PATCHLEVEL
)
407 # To make sure we do not include .config for any of the *config targets
408 # catch them early, and hand them over to scripts/kconfig/Makefile
409 # It is allowed to specify more targets when calling make, including
410 # mixing *config targets and build targets.
411 # For example 'make oldconfig all'.
412 # Detect when mixed targets is specified, and make a second invocation
413 # of make so .config is not included in this case either (for *config).
415 version_h
:= include/generated
/version_autogenerated.h
416 timestamp_h
:= include/generated
/timestamp_autogenerated.h
418 no-dot-config-targets
:= clean clobber mrproper
distclean \
419 help
%docs
check% coccicheck \
420 ubootversion backup tools-only
426 ifneq ($(filter $(no-dot-config-targets
), $(MAKECMDGOALS
)),)
427 ifeq ($(filter-out $(no-dot-config-targets
), $(MAKECMDGOALS
)),)
432 ifeq ($(KBUILD_EXTMOD
),)
433 ifneq ($(filter config
%config
,$(MAKECMDGOALS
)),)
435 ifneq ($(filter-out config
%config
,$(MAKECMDGOALS
)),)
441 ifeq ($(mixed-targets
),1)
442 # ===========================================================================
443 # We're called with mixed targets (*config and build targets).
444 # Handle them one by one.
446 PHONY
+= $(MAKECMDGOALS
) build-one-by-one
448 $(MAKECMDGOALS
): build-one-by-one
453 for i in
$(MAKECMDGOALS
); do \
454 $(MAKE
) -f
$(srctree
)/Makefile
$$i; \
458 ifeq ($(config-targets
),1)
459 # ===========================================================================
460 # *config targets only - make sure prerequisites are updated, and descend
461 # in scripts/kconfig to make the *config target
463 # Read arch specific Makefile to set KBUILD_DEFCONFIG as needed.
464 # KBUILD_DEFCONFIG may point out an alternative default configuration
465 # used for 'make defconfig'
467 %_config
:: outputmakefile
468 @
$(MKCONFIG
) -A
$(@
:_config
=)
471 # ===========================================================================
472 # Build targets only - this includes vmlinux, arch specific targets, clean
473 # targets and others. In general all targets except *config targets.
475 # load ARCH, BOARD, and CPU configuration
476 -include include/config.mk
478 ifeq ($(dot-config
),1)
480 -include include/autoconf.mk
481 -include include/autoconf.mk.dep
483 # load other configuration
484 include $(srctree
)/config.mk
486 ifeq ($(wildcard include/config.mk
),)
487 $(error
"System not configured - see README")
490 # If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
491 # that (or fail if absent). Otherwise, search for a linker script in a
495 #LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug
496 ifdef CONFIG_SYS_LDSCRIPT
497 # need to strip off double quotes
498 LDSCRIPT
:= $(srctree
)/$(CONFIG_SYS_LDSCRIPT
:"%"=%)
502 # If there is no specified link script, we look in a number of places for it
504 ifeq ($(wildcard $(LDSCRIPT
)),)
505 LDSCRIPT
:= $(srctree
)/board
/$(BOARDDIR
)/u-boot.lds
507 ifeq ($(wildcard $(LDSCRIPT
)),)
508 LDSCRIPT
:= $(srctree
)/$(CPUDIR
)/u-boot.lds
510 ifeq ($(wildcard $(LDSCRIPT
)),)
511 LDSCRIPT
:= $(srctree
)/arch
/$(ARCH
)/cpu
/u-boot.lds
518 endif # $(dot-config)
520 KBUILD_CFLAGS
+= -Os
#-fomit-frame-pointer
523 KBUILD_CFLAGS
+= -DBUILD_TAG
='"$(BUILD_TAG)"'
526 KBUILD_CFLAGS
+= $(call cc-option
,-fno-stack-protector
)
529 # $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format>
530 # option to the assembler.
533 # Report stack usage if supported
534 ifeq ($(shell $(CONFIG_SHELL
) $(srctree
)/scripts
/gcc-stack-usage.sh
$(CC
)),y
)
535 KBUILD_CFLAGS
+= -fstack-usage
538 KBUILD_CFLAGS
+= $(call cc-option
,-Wno-format-nonliteral
)
540 # turn jbsr into jsr for m68k
542 ifeq ($(findstring 3.4,$(shell $(CC
) --version
)),3.4)
543 KBUILD_AFLAGS
+= -Wa
,-gstabs
,-S
547 # Prohibit date/time macros, which would make the build non-deterministic
548 KBUILD_CFLAGS
+= $(call cc-option
,-Werror
=date-time
)
550 ifneq ($(CONFIG_SYS_TEXT_BASE
),)
551 KBUILD_CPPFLAGS
+= -DCONFIG_SYS_TEXT_BASE
=$(CONFIG_SYS_TEXT_BASE
)
554 export CONFIG_SYS_TEXT_BASE
556 # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
557 KBUILD_CPPFLAGS
+= $(KCPPFLAGS
)
558 KBUILD_AFLAGS
+= $(KAFLAGS
)
559 KBUILD_CFLAGS
+= $(KCFLAGS
)
561 # Use UBOOTINCLUDE when you must reference the include/ directory.
562 # Needed to be compatible with the O= option
565 $(if
$(KBUILD_SRC
), -I
$(srctree
)/include) \
566 -I
$(srctree
)/arch
/$(ARCH
)/include
568 NOSTDINC_FLAGS
+= -nostdinc
-isystem
$(shell $(CC
) -print-file-name
=include)
569 CHECKFLAGS
+= $(NOSTDINC_FLAGS
)
572 cpp_flags
:= $(KBUILD_CPPFLAGS
) $(PLATFORM_CPPFLAGS
) $(UBOOTINCLUDE
) \
574 c_flags
:= $(KBUILD_CFLAGS
) $(cpp_flags
)
576 #########################################################################
577 # U-Boot objects....order is important (i.e. start must be first)
579 head-y
:= $(CPUDIR
)/start.o
580 head-
$(CONFIG_4xx
) += arch
/powerpc
/cpu
/ppc4xx
/resetvec.o
581 head-
$(CONFIG_MPC85xx
) += arch
/powerpc
/cpu
/mpc85xx
/resetvec.o
583 HAVE_VENDOR_COMMON_LIB
= $(if
$(wildcard $(srctree
)/board
/$(VENDOR
)/common
/Makefile
),y
,n
)
586 libs-
$(HAVE_VENDOR_COMMON_LIB
) += board
/$(VENDOR
)/common
/
589 libs-y
+= $(CPUDIR
)/$(SOC
)/
591 libs-
$(CONFIG_OF_EMBED
) += dts
/
592 libs-y
+= arch
/$(ARCH
)/lib
/
597 libs-
$(CONFIG_DM
) += drivers
/core
/
598 libs-y
+= drivers
/dma
/
599 libs-y
+= drivers
/gpio
/
600 libs-y
+= drivers
/i2c
/
601 libs-y
+= drivers
/input
/
602 libs-y
+= drivers
/mmc
/
603 libs-y
+= drivers
/mtd
/
604 libs-
$(CONFIG_CMD_NAND
) += drivers
/mtd
/nand
/
605 libs-y
+= drivers
/mtd
/onenand
/
606 libs-
$(CONFIG_CMD_UBI
) += drivers
/mtd
/ubi
/
607 libs-y
+= drivers
/mtd
/spi
/
608 libs-y
+= drivers
/net
/
609 libs-y
+= drivers
/net
/phy
/
610 libs-y
+= drivers
/pci
/
611 libs-y
+= drivers
/power
/ \
612 drivers
/power
/fuel_gauge
/ \
614 drivers
/power
/pmic
/ \
615 drivers
/power
/battery
/
616 libs-y
+= drivers
/spi
/
617 libs-
$(CONFIG_FMAN_ENET
) += drivers
/net
/fm
/
618 libs-
$(CONFIG_SYS_FSL_DDR
) += drivers
/ddr
/fsl
/
619 libs-y
+= drivers
/serial
/
620 libs-y
+= drivers
/usb
/eth
/
621 libs-y
+= drivers
/usb
/gadget
/
622 libs-y
+= drivers
/usb
/host
/
623 libs-y
+= drivers
/usb
/musb
/
624 libs-y
+= drivers
/usb
/musb-new
/
625 libs-y
+= drivers
/usb
/phy
/
626 libs-y
+= drivers
/usb
/ulpi
/
628 libs-y
+= lib
/libfdt
/
629 libs-
$(CONFIG_API
) += api
/
630 libs-
$(CONFIG_HAS_POST
) += post
/
633 libs-
$(CONFIG_DM_DEMO
) += drivers
/demo
/
635 ifneq (,$(filter $(SOC
), mx25 mx27 mx5 mx6 mx31 mx35 mxs vf610
))
636 libs-y
+= arch
/$(ARCH
)/imx-common
/
639 libs-
$(CONFIG_ARM
) += arch
/arm
/cpu
/
640 libs-
$(CONFIG_PPC
) += arch
/powerpc
/cpu
/
642 libs-y
+= $(if
$(BOARDDIR
),board
/$(BOARDDIR
)/)
644 libs-y
:= $(sort $(libs-y
))
646 u-boot-dirs
:= $(patsubst %/,%,$(filter %/, $(libs-y
))) tools examples
648 u-boot-alldirs
:= $(sort $(u-boot-dirs
) $(patsubst %/,%,$(filter %/, $(libs-
))))
650 libs-y
:= $(patsubst %/, %/built-in.o
, $(libs-y
))
652 u-boot-init
:= $(head-y
)
653 u-boot-main
:= $(libs-y
)
657 ifdef CONFIG_USE_PRIVATE_LIBGCC
658 ifeq ($(CONFIG_USE_PRIVATE_LIBGCC
),y
)
659 PLATFORM_LIBGCC
= arch
/$(ARCH
)/lib
/lib.a
661 PLATFORM_LIBGCC
= -L
$(CONFIG_USE_PRIVATE_LIBGCC
) -lgcc
664 PLATFORM_LIBGCC
:= -L
$(shell dirname
`$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc
666 PLATFORM_LIBS
+= $(PLATFORM_LIBGCC
)
668 export PLATFORM_LIBGCC
670 # Special flags for CPP when processing the linker script.
671 # Pass the version down so we can handle backwards compatibility
674 -include $(srctree
)/include/u-boot
/u-boot.lds.h \
676 $(shell $(LD
) --version | \
677 sed
-ne
's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
679 #########################################################################
680 #########################################################################
682 ifneq ($(CONFIG_BOARD_SIZE_LIMIT
),)
684 @actual
=`wc -c $@ | awk '{print $$1}'`; \
685 limit
=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \
686 if
test $$actual -gt
$$limit; then \
687 echo
"$@ exceeds file size limit:" >&2 ; \
688 echo
" limit: $$limit bytes" >&2 ; \
689 echo
" actual: $$actual bytes" >&2 ; \
690 echo
" excess: $$((actual - limit)) bytes" >&2; \
697 # Statically apply RELA-style relocations (currently arm64 only)
698 ifneq ($(CONFIG_STATIC_RELA
),)
699 # $(1) is u-boot ELF, $(2) is u-boot bin, $(3) is text base
701 start
=$$($(NM
) $(1) | grep __rel_dyn_start | cut
-f
1 -d
' '); \
702 end
=$$($(NM
) $(1) | grep __rel_dyn_end | cut
-f
1 -d
' '); \
703 tools
/relocate-rela
$(2) $(3) $$start $$end
708 # Always append ALL so that arch config.mk's can add custom ones
709 ALL-y
+= u-boot.srec u-boot.bin System.map binary_size_check
711 ALL-
$(CONFIG_ONENAND_U_BOOT
) += u-boot-onenand.bin
712 ifeq ($(CONFIG_SPL_FSL_PBL
),y
)
713 ALL-
$(CONFIG_RAMBOOT_PBL
) += u-boot-with-spl-pbl.bin
715 ALL-
$(CONFIG_RAMBOOT_PBL
) += u-boot.pbl
717 ALL-
$(CONFIG_SPL
) += spl
/u-boot-spl.bin
718 ALL-
$(CONFIG_SPL_FRAMEWORK
) += u-boot.img
719 ALL-
$(CONFIG_TPL
) += tpl
/u-boot-tpl.bin
720 ALL-
$(CONFIG_OF_SEPARATE
) += u-boot.dtb u-boot-dtb.bin
721 ifeq ($(CONFIG_SPL_FRAMEWORK
),y
)
722 ALL-
$(CONFIG_OF_SEPARATE
) += u-boot-dtb.img
724 ALL-
$(CONFIG_OF_HOSTFILE
) += u-boot.dtb
725 ifneq ($(CONFIG_SPL_TARGET
),)
726 ALL-
$(CONFIG_SPL
) += $(CONFIG_SPL_TARGET
:"%"=%)
728 ALL-
$(CONFIG_REMAKE_ELF
) += u-boot.elf
730 # enable combined SPL/u-boot/dtb rules for tegra
731 ifneq ($(CONFIG_TEGRA
),)
732 ifeq ($(CONFIG_SPL
),y
)
733 ifeq ($(CONFIG_OF_SEPARATE
),y
)
734 ALL-y
+= u-boot-dtb-tegra.bin
736 ALL-y
+= u-boot-nodtb-tegra.bin
741 LDFLAGS_u-boot
+= $(LDFLAGS_FINAL
)
742 ifneq ($(CONFIG_SYS_TEXT_BASE
),)
743 LDFLAGS_u-boot
+= -Ttext
$(CONFIG_SYS_TEXT_BASE
)
746 quiet_cmd_objcopy
= OBJCOPY
$@
747 cmd_objcopy
= $(OBJCOPY
) $(OBJCOPYFLAGS
) $(OBJCOPYFLAGS_
$(@F
)) $< $@
749 quiet_cmd_mkimage
= MKIMAGE
$@
750 cmd_mkimage
= $(objtree
)/tools
/mkimage
$(MKIMAGEFLAGS_
$(@F
)) -d
$< $@ \
751 $(if
$(KBUILD_VERBOSE
:1=), >/dev
/null
)
753 quiet_cmd_cat
= CAT
$@
754 cmd_cat
= cat
$(filter-out $(PHONY
), $^
) > $@
756 append
= cat
$(filter-out $< $(PHONY
), $^
) >> $@
758 quiet_cmd_pad_cat
= CAT
$@
759 cmd_pad_cat
= $(cmd_objcopy
) && $(append
) ||
rm -f
$@
764 dtbs dts
/dt.dtb
: checkdtc u-boot
765 $(Q
)$(MAKE
) $(build
)=dts dtbs
767 u-boot-dtb.bin
: u-boot.bin dts
/dt.dtb FORCE
768 $(call if_changed
,cat
)
771 $(Q
)$(MAKE
) $(build
)=arch
/arm
/imx-common
$@
773 quiet_cmd_copy
= COPY
$@
776 u-boot.dtb
: dts
/dt.dtb
779 OBJCOPYFLAGS_u-boot.hex
:= -O ihex
781 OBJCOPYFLAGS_u-boot.srec
:= -O srec
783 u-boot.hex u-boot.srec
: u-boot FORCE
784 $(call if_changed
,objcopy
)
786 OBJCOPYFLAGS_u-boot.bin
:= -O binary
788 binary_size_check
: u-boot.bin System.map FORCE
789 @file_size
=`stat -c %s u-boot.bin` ; \
790 map_size
=$(shell cat System.map | \
791 awk
'/_image_copy_start/ {start = $$1} /_image_binary_end/ {end = $$1} END {if (start != "" && end != "") print "ibase=16; " toupper(end) " - " toupper(start)}' \
793 if
[ "" != "$$map_size" ]; then \
794 if
test $$map_size -ne
$$file_size; then \
795 echo
"System.map shows a binary size of $$map_size" >&2 ; \
796 echo
" but u-boot.bin shows $$file_size" >&2 ; \
801 u-boot.bin
: u-boot FORCE
802 $(call if_changed
,objcopy
)
803 $(call DO_STATIC_RELA
,$<,$@
,$(CONFIG_SYS_TEXT_BASE
))
808 $(LDR
) -T
$(CONFIG_BFIN_CPU
) -c
$@
$< $(LDR_FLAGS
)
811 OBJCOPYFLAGS_u-boot.ldr.hex
:= -I binary
-O ihex
813 OBJCOPYFLAGS_u-boot.ldr.srec
:= -I binary
-O srec
815 u-boot.ldr.hex u-boot.ldr.srec
: u-boot.ldr FORCE
816 $(call if_changed
,objcopy
)
819 # U-Boot entry point, needed for booting of full-blown U-Boot
820 # from the SPL U-Boot version.
822 ifndef CONFIG_SYS_UBOOT_START
823 CONFIG_SYS_UBOOT_START
:= 0
826 MKIMAGEFLAGS_u-boot.img
= -A
$(ARCH
) -T firmware
-C none
-O u-boot \
827 -a
$(CONFIG_SYS_TEXT_BASE
) -e
$(CONFIG_SYS_UBOOT_START
) \
828 -n
"U-Boot $(UBOOTRELEASE) for $(BOARD) board"
830 MKIMAGEFLAGS_u-boot.kwb
= -n
$(srctree
)/$(CONFIG_SYS_KWD_CONFIG
:"%"=%) \
831 -T kwbimage
-a
$(CONFIG_SYS_TEXT_BASE
) -e
$(CONFIG_SYS_TEXT_BASE
)
833 MKIMAGEFLAGS_u-boot.pbl
= -n
$(srctree
)/$(CONFIG_SYS_FSL_PBL_RCW
:"%"=%) \
834 -R
$(srctree
)/$(CONFIG_SYS_FSL_PBL_PBI
:"%"=%) -T pblimage
836 u-boot.img u-boot.kwb u-boot.pbl
: u-boot.bin FORCE
837 $(call if_changed
,mkimage
)
839 MKIMAGEFLAGS_u-boot-dtb.img
= $(MKIMAGEFLAGS_u-boot.img
)
841 u-boot-dtb.img
: u-boot-dtb.bin FORCE
842 $(call if_changed
,mkimage
)
844 u-boot.sha1
: u-boot.bin
845 tools
/ubsha1 u-boot.bin
848 $(OBJDUMP
) -d
$< > $@
851 SPL_PAYLOAD
:= tpl
/u-boot-with-tpl.bin
853 SPL_PAYLOAD
:= u-boot.bin
856 OBJCOPYFLAGS_u-boot-with-spl.bin
= -I binary
-O binary \
857 --pad-to
=$(CONFIG_SPL_PAD_TO
)
858 u-boot-with-spl.bin
: spl
/u-boot-spl.bin
$(SPL_PAYLOAD
) FORCE
859 $(call if_changed
,pad_cat
)
861 OBJCOPYFLAGS_u-boot-with-tpl.bin
= -I binary
-O binary \
862 --pad-to
=$(CONFIG_TPL_PAD_TO
)
863 tpl
/u-boot-with-tpl.bin
: tpl
/u-boot-tpl.bin u-boot.bin FORCE
864 $(call if_changed
,pad_cat
)
866 SPL
: spl
/u-boot-spl.bin FORCE
867 $(Q
)$(MAKE
) $(build
)=arch
/arm
/imx-common
$@
869 u-boot-with-spl.imx u-boot-with-nand-spl.imx
: SPL u-boot.bin FORCE
870 $(Q
)$(MAKE
) $(build
)=arch
/arm
/imx-common
$@
872 MKIMAGEFLAGS_u-boot.ubl
= -n
$(UBL_CONFIG
) -T ublimage
-e
$(CONFIG_SYS_TEXT_BASE
)
874 u-boot.ubl
: u-boot-with-spl.bin FORCE
875 $(call if_changed
,mkimage
)
877 MKIMAGEFLAGS_u-boot-spl.ais
= -s
-n
$(if
$(CONFIG_AIS_CONFIG_FILE
), \
878 $(srctree
)/$(CONFIG_AIS_CONFIG_FILE
:"%"=%),"/dev/null") \
879 -T aisimage
-e
$(CONFIG_SPL_TEXT_BASE
)
880 spl
/u-boot-spl.ais
: spl
/u-boot-spl.bin FORCE
881 $(call if_changed
,mkimage
)
883 OBJCOPYFLAGS_u-boot.ais
= -I binary
-O binary
--pad-to
=$(CONFIG_SPL_PAD_TO
)
884 u-boot.ais
: spl
/u-boot-spl.ais u-boot.img FORCE
885 $(call if_changed
,pad_cat
)
887 u-boot-signed.sb
: u-boot.bin spl
/u-boot-spl.bin
888 $(Q
)$(MAKE
) $(build
)=arch
/arm
/cpu
/arm926ejs
/mxs u-boot-signed.sb
889 u-boot.sb
: u-boot.bin spl
/u-boot-spl.bin
890 $(Q
)$(MAKE
) $(build
)=arch
/arm
/cpu
/arm926ejs
/mxs u-boot.sb
892 # On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
893 # Both images are created using mkimage (crc etc), so that the ROM
894 # bootloader can check its integrity. Padding needs to be done to the
895 # SPL image (with mkimage header) and not the binary. Otherwise the resulting image
896 # which is loaded/copied by the ROM bootloader to SRAM doesn't fit.
897 # The resulting image containing both U-Boot images is called u-boot.spr
898 MKIMAGEFLAGS_u-boot-spl.img
= -A
$(ARCH
) -T firmware
-C none \
899 -a
$(CONFIG_SPL_TEXT_BASE
) -e
$(CONFIG_SPL_TEXT_BASE
) -n XLOADER
900 spl
/u-boot-spl.img
: spl
/u-boot-spl.bin FORCE
901 $(call if_changed
,mkimage
)
903 OBJCOPYFLAGS_u-boot.spr
= -I binary
-O binary
--pad-to
=$(CONFIG_SPL_PAD_TO
) \
905 u-boot.spr
: spl
/u-boot-spl.img u-boot.img FORCE
906 $(call if_changed
,pad_cat
)
908 MKIMAGEFLAGS_u-boot-spl.gph
= -A
$(ARCH
) -T gpimage
-C none \
909 -a
$(CONFIG_SPL_TEXT_BASE
) -e
$(CONFIG_SPL_TEXT_BASE
) -n SPL
910 spl
/u-boot-spl.gph
: spl
/u-boot-spl.bin FORCE
911 $(call if_changed
,mkimage
)
913 OBJCOPYFLAGS_u-boot-spi.gph
= -I binary
-O binary
--pad-to
=$(CONFIG_SPL_PAD_TO
) \
915 u-boot-spi.gph
: spl
/u-boot-spl.gph u-boot.img FORCE
916 $(call if_changed
,pad_cat
)
918 ifneq ($(CONFIG_SUNXI
),)
919 OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin
= -I binary
-O binary \
920 --pad-to
=$(CONFIG_SPL_PAD_TO
) --gap-fill
=0xff
921 u-boot-sunxi-with-spl.bin
: spl
/sunxi-spl.bin u-boot.img FORCE
922 $(call if_changed
,pad_cat
)
925 ifneq ($(CONFIG_TEGRA
),)
926 OBJCOPYFLAGS_u-boot-nodtb-tegra.bin
= -O binary
--pad-to
=$(CONFIG_SYS_TEXT_BASE
)
927 u-boot-nodtb-tegra.bin
: spl
/u-boot-spl u-boot.bin FORCE
928 $(call if_changed
,pad_cat
)
930 ifeq ($(CONFIG_OF_SEPARATE
),y
)
931 u-boot-dtb-tegra.bin
: u-boot-nodtb-tegra.bin dts
/dt.dtb FORCE
932 $(call if_changed
,cat
)
936 u-boot-img.bin
: spl
/u-boot-spl.bin u-boot.img FORCE
937 $(call if_changed
,cat
)
939 #Add a target to create boot binary having SPL binary in PBI format
940 #concatenated with u-boot binary. It is need by PowerPC SoC having
941 #internal SRAM <= 512KB.
942 MKIMAGEFLAGS_u-boot-spl.pbl
= -n
$(srctree
)/$(CONFIG_SYS_FSL_PBL_RCW
:"%"=%) \
943 -R
$(srctree
)/$(CONFIG_SYS_FSL_PBL_PBI
:"%"=%) -T pblimage
945 spl
/u-boot-spl.pbl
: spl
/u-boot-spl.bin FORCE
946 $(call if_changed
,mkimage
)
948 OBJCOPYFLAGS_u-boot-with-spl-pbl.bin
= -I binary
-O binary
--pad-to
=$(CONFIG_SPL_PAD_TO
) \
951 u-boot-with-spl-pbl.bin
: spl
/u-boot-spl.pbl u-boot.bin FORCE
952 $(call if_changed
,pad_cat
)
954 # PPC4xx needs the SPL at the end of the image, since the reset vector
955 # is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
956 # and need to introduce a new build target with the full blown U-Boot
957 # at the start padded up to the start of the SPL image. And then concat
958 # the SPL image to the end.
960 OBJCOPYFLAGS_u-boot-img-spl-at-end.bin
:= -I binary
-O binary \
961 --pad-to
=$(CONFIG_UBOOT_PAD_TO
) --gap-fill
=0xff
962 u-boot-img-spl-at-end.bin
: u-boot.img spl
/u-boot-spl.bin FORCE
963 $(call if_changed
,pad_cat
)
965 # Create a new ELF from a raw binary file. This is useful for arm64
966 # where static relocation needs to be performed on the raw binary,
967 # but certain simulators only accept an ELF file (but don't do the
969 # FIXME refactor dts/Makefile to share target/arch detection
970 u-boot.elf
: u-boot.bin
971 @
$(OBJCOPY
) -B aarch64
-I binary
-O elf64-littleaarch64 \
973 @
$(LD
) u-boot-elf.o
-o
$@ \
974 --defsym
=_start
=$(CONFIG_SYS_TEXT_BASE
) \
975 -Ttext
=$(CONFIG_SYS_TEXT_BASE
)
977 # Rule to link u-boot
978 # May be overridden by arch/$(ARCH)/config.mk
979 quiet_cmd_u-boot__ ?
= LD
$@
980 cmd_u-boot__ ?
= $(LD
) $(LDFLAGS
) $(LDFLAGS_u-boot
) -o
$@ \
981 -T u-boot.lds
$(u-boot-init
) \
982 --start-group
$(u-boot-main
) --end-group \
983 $(PLATFORM_LIBS
) -Map u-boot.map
985 u-boot
: $(u-boot-init
) $(u-boot-main
) u-boot.lds
986 $(call if_changed
,u-boot__
)
987 ifeq ($(CONFIG_KALLSYMS
),y
)
988 smap
=`$(call SYSTEM_MAP,u-boot) | \
989 awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
990 $(CC
) $(c_flags
) -DSYSTEM_MAP
="\"$${smap}\"" \
991 -c
$(srctree
)/common
/system_map.c
-o common
/system_map.o
992 $(call cmd
,u-boot__
) common
/system_map.o
995 # The actual objects are generated when descending,
996 # make sure no implicit rule kicks in
997 $(sort $(u-boot-init
) $(u-boot-main
)): $(u-boot-dirs
) ;
999 # Handle descending into subdirectories listed in $(vmlinux-dirs)
1000 # Preset locale variables to speed up the build process. Limit locale
1001 # tweaks to this spot to avoid wrong language settings when running
1002 # make menuconfig etc.
1003 # Error messages still appears in the original language
1005 PHONY
+= $(u-boot-dirs
)
1006 $(u-boot-dirs
): prepare scripts
1007 $(Q
)$(MAKE
) $(build
)=$@
1010 # The "tools" are needed early
1011 $(filter-out tools
, $(u-boot-dirs
)): tools
1012 # The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
1013 # is "yes"), so compile examples after U-Boot is compiled.
1014 examples
: $(filter-out examples
, $(u-boot-dirs
))
1016 define filechk_uboot.release
1017 echo
"$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1020 # Store (new) UBOOTRELEASE string in include/config/uboot.release
1021 include/config
/uboot.release
: Makefile FORCE
1022 $(call filechk
,uboot.release
)
1025 # Things we need to do before we recursively start building the kernel
1026 # or the modules are listed in "prepare".
1027 # A multi level approach is used. prepareN is processed before prepareN-1.
1028 # archprepare is used in arch Makefiles and when processed asm symlink,
1029 # version.h and scripts_basic is processed / created.
1031 # Listed in dependency order
1032 PHONY
+= prepare archprepare prepare0 prepare1 prepare2 prepare3
1034 # prepare3 is used to check if we are building in a separate output directory,
1036 # 1) Check that make has not been executed in the kernel src $(srctree)
1037 prepare3
: include/config
/uboot.release
1038 ifneq ($(KBUILD_SRC
),)
1039 @
$(kecho
) ' Using $(srctree) as source for u-boot'
1040 $(Q
)if
[ -f
$(srctree
)/include/config.mk
]; then \
1041 echo
>&2 " $(srctree) is not clean, please run 'make mrproper'"; \
1042 echo
>&2 " in the '$(srctree)' directory.";\
1047 # prepare2 creates a makefile if using a separate output directory
1048 prepare2
: prepare3 outputmakefile
1050 prepare1
: prepare2
$(version_h
) $(timestamp_h
)
1051 ifeq ($(__HAVE_ARCH_GENERIC_BOARD
),)
1052 ifeq ($(CONFIG_SYS_GENERIC_BOARD
),y
)
1053 @echo
>&2 " Your architecture does not support generic board."
1054 @echo
>&2 " Please undefine CONFIG_SYS_GENERIC_BOARD in your board config file."
1058 ifeq ($(wildcard $(LDSCRIPT
)),)
1059 @echo
>&2 " Could not find linker script."
1063 archprepare
: prepare1 scripts_basic
1065 prepare0
: archprepare FORCE
1066 $(Q
)$(MAKE
) $(build
)=.
1068 # All the preparing..
1071 # Generate some files
1072 # ---------------------------------------------------------------------------
1074 define filechk_version.h
1075 (echo \
#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \
1076 echo \
#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \
1077 echo \
#define CC_VERSION_STRING \"$$($(CC) --version | head -n 1)\"; \
1078 echo \
#define LD_VERSION_STRING \"$$($(LD) --version | head -n 1)\"; )
1081 define filechk_timestamp.h
1082 (LC_ALL
=C date
+'#define U_BOOT_DATE "%b %d %C%y"'; \
1083 LC_ALL
=C date
+'#define U_BOOT_TIME "%T"')
1086 $(version_h
): include/config
/uboot.release FORCE
1087 $(call filechk
,version.h
)
1089 $(timestamp_h
): $(srctree
)/Makefile FORCE
1090 $(call filechk
,timestamp.h
)
1093 # Auto-generate the autoconf.mk file (which is included by all makefiles)
1095 # This target actually generates 2 files; autoconf.mk and autoconf.mk.dep.
1096 # the dep file is only include in this top level makefile to determine when
1097 # to regenerate the autoconf.mk file.
1099 quiet_cmd_autoconf_dep
= GEN
$@
1100 cmd_autoconf_dep
= $(CC
) -x c
-DDO_DEPS_ONLY
-M
$(c_flags
) \
1101 -MQ
include/autoconf.mk
$(srctree
)/include/common.h
> $@ ||
rm $@
1103 include/autoconf.mk.dep
: include/config.h
include/common.h
1104 $(call cmd
,autoconf_dep
)
1106 quiet_cmd_autoconf
= GEN
$@
1108 $(CPP
) $(c_flags
) -DDO_DEPS_ONLY
-dM
$(srctree
)/include/common.h
> $@.tmp
&& \
1109 sed
-n
-f
$(srctree
)/tools
/scripts
/define2mk.sed
$@.tmp
> $@
; \
1112 include/autoconf.mk
: include/config.h
1113 $(call cmd
,autoconf
)
1115 # ---------------------------------------------------------------------------
1119 @echo
'*** Warning: make $@ is unnecessary now.'
1121 # ---------------------------------------------------------------------------
1122 quiet_cmd_cpp_lds
= LDS
$@
1123 cmd_cpp_lds
= $(CPP
) -Wp
,-MD
,$(depfile
) $(cpp_flags
) $(LDPPFLAGS
) -ansi \
1124 -D__ASSEMBLY__
-x assembler-with-cpp
-P
-o
$@
$<
1126 u-boot.lds
: $(LDSCRIPT
) prepare FORCE
1127 $(call if_changed_dep
,cpp_lds
)
1129 spl
/u-boot-spl.bin
: spl
/u-boot-spl
1131 spl
/u-boot-spl
: tools prepare
1132 $(Q
)$(MAKE
) obj
=spl
-f
$(srctree
)/scripts
/Makefile.spl
all
1134 spl
/sunxi-spl.bin
: spl
/u-boot-spl
1137 tpl
/u-boot-tpl.bin
: tools prepare
1138 $(Q
)$(MAKE
) obj
=tpl
-f
$(srctree
)/scripts
/Makefile.spl
all CONFIG_TPL_BUILD
=y
1140 TAG_SUBDIRS
:= $(u-boot-dirs
) include
1146 ctags
-w
-o ctags
`$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
1147 -name '*.[chS]' -print`
1150 etags
-a
-o
$(obj
)etags
`$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
1151 -name '*.[chS]' -print`
1153 $(FIND
) $(FINDFLAGS
) $(TAG_SUBDIRS
) -name
'*.[chS]' -print > \
1159 grep
-v
'\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
1162 @
$(call SYSTEM_MAP
,$<) > $@
1165 @if
test $(call dtc-version
) -lt
0104; then \
1166 echo
'*** Your dtc is too old, please upgrade to dtc 1.4 or newer'; \
1170 #########################################################################
1172 # ARM relocations should all be R_ARM_RELATIVE (32-bit) or
1173 # R_AARCH64_RELATIVE (64-bit).
1174 checkarmreloc
: u-boot
1175 @RELOC
="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \
1176 grep R_A | sort -u`"; \
1177 if
test "$$RELOC" != "R_ARM_RELATIVE" -a \
1178 "$$RELOC" != "R_AARCH64_RELATIVE"; then \
1179 echo
"$< contains unexpected relocations: $$RELOC"; \
1184 $(Q
)$(MAKE
) $(build
)=tools
/$@
1186 tools-only
: scripts_basic
$(version_h
) $(timestamp_h
)
1187 $(Q
)$(MAKE
) $(build
)=tools
1189 tools-all
: export HOST_TOOLS_ALL
=y
1190 tools-all
: env tools
;
1192 cross_tools
: export CROSS_BUILD_TOOLS
=y
1193 cross_tools
: tools
;
1197 git log
--no-merges U-Boot-1_1_5.. | \
1198 unexpand
-a | sed
-e
's/\s\s*$$//' > $@
1200 include/license.h
: tools
/bin2header COPYING
1201 cat COPYING | gzip
-9 -c | .
/tools
/bin2header license_gzip
> include/license.h
1202 #########################################################################
1205 # Cleaning is done on three levels.
1206 # make clean Delete most generated files
1207 # Leave enough to build external modules
1208 # make mrproper Delete the current configuration, and all generated files
1209 # make distclean Remove editor backup files, patch leftover files and the like
1211 # Directories & files removed with 'make clean'
1212 CLEAN_DIRS
+= $(MODVERDIR
)
1213 CLEAN_FILES
+= u-boot.lds
include/bmp_logo.h
include/bmp_logo_data.h \
1214 include/autoconf.mk
* include/spl-autoconf.mk \
1215 include/tpl-autoconf.mk
1217 # Directories & files removed with 'make clobber'
1218 CLOBBER_DIRS
+= spl tpl
1219 CLOBBER_FILES
+= u-boot
* MLO
* SPL System.map
1221 # Directories & files removed with 'make mrproper'
1222 MRPROPER_DIRS
+= include/config
include/generated \
1224 MRPROPER_FILES
+= .config .config.old \
1225 tags TAGS cscope
* GPATH GTAGS GRTAGS GSYMS \
1226 include/config.h
include/config.mk
1228 # clean - Delete most, but leave enough to build external modules
1230 clean: rm-dirs
:= $(CLEAN_DIRS
)
1231 clean: rm-files
:= $(CLEAN_FILES
)
1233 clean-dirs
:= $(foreach f
,$(u-boot-alldirs
),$(if
$(wildcard $(srctree
)/$f/Makefile
),$f))
1235 clean-dirs
:= $(addprefix _clean_
, $(clean-dirs
) doc
/DocBook
)
1237 PHONY
+= $(clean-dirs
) clean archclean
1239 $(Q
)$(MAKE
) $(clean)=$(patsubst _clean_
%,%,$@
)
1241 # TODO: Do not use *.cfgtmp
1242 clean: $(clean-dirs
)
1245 @find
$(if
$(KBUILD_EXTMOD
), $(KBUILD_EXTMOD
), .
) $(RCS_FIND_IGNORE
) \
1246 \
( -name
'*.[oas]' -o
-name
'*.ko' -o
-name
'.*.cmd' \
1247 -o
-name
'*.ko.*' -o
-name
'*.su' -o
-name
'*.cfgtmp' \
1248 -o
-name
'.*.d' -o
-name
'.*.tmp' -o
-name
'*.mod.c' \
1249 -o
-name
'*.symtypes' -o
-name
'modules.order' \
1250 -o
-name modules.builtin
-o
-name
'.tmp_*.o.*' \
1251 -o
-name
'*.gcno' \
) -type f
-print | xargs
rm -f
1255 clobber: rm-dirs
:= $(CLOBBER_DIRS
)
1256 clobber: rm-files
:= $(CLOBBER_FILES
)
1264 # mrproper - Delete all generated files, including .config
1266 mrproper
: rm-dirs
:= $(wildcard $(MRPROPER_DIRS
))
1267 mrproper
: rm-files
:= $(wildcard $(MRPROPER_FILES
))
1268 mrproper-dirs
:= $(addprefix _mrproper_
,scripts
)
1270 PHONY
+= $(mrproper-dirs
) mrproper archmrproper
1272 $(Q
)$(MAKE
) $(clean)=$(patsubst _mrproper_
%,%,$@
)
1274 mrproper
: clobber $(mrproper-dirs
)
1277 @
rm -f arch
/*/include/asm
/arch
1284 @find
$(srctree
) $(RCS_FIND_IGNORE
) \
1285 \
( -name
'*.orig' -o
-name
'*.rej' -o
-name
'*~' \
1286 -o
-name
'*.bak' -o
-name
'#*#' -o
-name
'.*.orig' \
1287 -o
-name
'.*.rej' -o
-name
'*%' -o
-name
'core' \
1288 -o
-name
'*.pyc' \
) \
1289 -type f
-print | xargs
rm -f
1292 F
=`basename $(srctree)` ; cd ..
; \
1293 gtar
--force-local
-zcvf
`LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
1296 @echo
'Cleaning targets:'
1297 @echo
' clean - Remove most generated files but keep the config and'
1298 @echo
' necessities for testing u-boot'
1299 @echo
' clobber - Remove most generated files but keep the config'
1300 @echo
' mrproper - Remove all generated files + config + various backup files'
1301 @echo
' distclean - mrproper + remove editor backup and patch files'
1303 # uncomment after adding Kconfig feature
1304 # @echo 'Configuration targets:'
1305 # @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
1307 @echo
'Other generic targets:'
1308 @echo
' all - Build all necessary images depending on configuration'
1309 @echo
' u-boot - Build the bare u-boot'
1310 @echo
' dir/ - Build all files in dir and below'
1311 @echo
' dir/file.[oisS] - Build specified target only'
1312 @echo
' dir/file.lst - Build specified mixed source/assembly target only'
1313 @echo
' (requires a recent binutils and recent build (System.map))'
1314 @echo
' tags/TAGS - Generate tags file for editors'
1315 @echo
' cscope - Generate cscope index'
1316 @echo
' ubootrelease - Output the release version string'
1317 @echo
' ubootversion - Output the version stored in Makefile'
1319 @echo
'Static analysers'
1320 @echo
' checkstack - Generate a list of stack hogs'
1322 @echo
'Documentation targets:'
1323 @
$(MAKE
) -f
$(srctree
)/doc
/DocBook
/Makefile dochelp
1325 @echo
' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
1326 @echo
' make V=2 [targets] 2 => give reason for rebuild of target'
1327 @echo
' make O=dir [targets] Locate all output files in "dir", including .config'
1328 @echo
' make C=1 [targets] Check all c source with $$CHECK (sparse by default)'
1329 @echo
' make C=2 [targets] Force check of all c source with $$CHECK'
1330 @echo
' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
1331 @echo
' make W=n [targets] Enable extra gcc checks, n=1,2,3 where'
1332 @echo
' 1: warnings which may be relevant and do not occur too often'
1333 @echo
' 2: warnings which occur quite often but may still be relevant'
1334 @echo
' 3: more obscure warnings, can most likely be ignored'
1335 @echo
' Multiple levels can be combined with W=12 or W=123'
1337 @echo
'Execute "make" or "make all" to build all targets marked with [*] '
1338 @echo
'For further info see the ./README file'
1341 # Documentation targets
1342 # ---------------------------------------------------------------------------
1343 %docs
: scripts_basic FORCE
1344 $(Q
)$(MAKE
) $(build
)=scripts build_docproc
1345 $(Q
)$(MAKE
) $(build
)=doc
/DocBook
$@
1348 PHONY
+= prepare scripts
1352 endif #ifeq ($(config-targets),1)
1353 endif #ifeq ($(mixed-targets),1)
1355 PHONY
+= checkstack ubootrelease ubootversion
1358 $(OBJDUMP
) -d u-boot
$$(find .
-name u-boot-spl
) | \
1359 $(PERL
) $(src
)/scripts
/checkstack.pl
$(ARCH
)
1362 @echo
"$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1365 @echo
$(UBOOTVERSION
)
1368 # ---------------------------------------------------------------------------
1369 # Single targets are compatible with:
1370 # - build with mixed source and output
1371 # - build with separate output dir 'make O=...'
1372 # - external modules
1374 # target-dir => where to store outputfile
1375 # build-dir => directory in kernel source tree to use
1377 ifeq ($(KBUILD_EXTMOD
),)
1378 build-dir
= $(patsubst %/,%,$(dir $@
))
1379 target-dir
= $(dir $@
)
1381 zap-slash
=$(filter-out .
,$(patsubst %/,%,$(dir $@
)))
1382 build-dir
= $(KBUILD_EXTMOD
)$(if
$(zap-slash
),/$(zap-slash
))
1383 target-dir
= $(if
$(KBUILD_EXTMOD
),$(dir $<),$(dir $@
))
1386 %.s
: %.c prepare scripts FORCE
1387 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(target-dir
)$(notdir $@
)
1388 %.i
: %.c prepare scripts FORCE
1389 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(target-dir
)$(notdir $@
)
1390 %.o
: %.c prepare scripts FORCE
1391 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(target-dir
)$(notdir $@
)
1392 %.lst
: %.c prepare scripts FORCE
1393 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(target-dir
)$(notdir $@
)
1394 %.s
: %.S prepare scripts FORCE
1395 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(target-dir
)$(notdir $@
)
1396 %.o
: %.S prepare scripts FORCE
1397 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(target-dir
)$(notdir $@
)
1398 %.symtypes
: %.c prepare scripts FORCE
1399 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(target-dir
)$(notdir $@
)
1402 /: prepare scripts FORCE
1404 $(Q
)$(MAKE
) KBUILD_MODULES
=$(if
$(CONFIG_MODULES
),1) \
1405 $(build
)=$(build-dir
)
1406 %/: prepare scripts FORCE
1408 $(Q
)$(MAKE
) KBUILD_MODULES
=$(if
$(CONFIG_MODULES
),1) \
1409 $(build
)=$(build-dir
)
1410 %.ko
: prepare scripts FORCE
1412 $(Q
)$(MAKE
) KBUILD_MODULES
=$(if
$(CONFIG_MODULES
),1) \
1413 $(build
)=$(build-dir
) $(@
:.ko
=.o
)
1414 $(Q
)$(MAKE
) -f
$(srctree
)/scripts
/Makefile.modpost
1416 # FIXME Should go into a make.lib or something
1417 # ===========================================================================
1419 quiet_cmd_rmdirs
= $(if
$(wildcard $(rm-dirs
)),CLEAN
$(wildcard $(rm-dirs
)))
1420 cmd_rmdirs
= rm -rf
$(rm-dirs
)
1422 quiet_cmd_rmfiles
= $(if
$(wildcard $(rm-files
)),CLEAN
$(wildcard $(rm-files
)))
1423 cmd_rmfiles
= rm -f
$(rm-files
)
1425 # read all saved command lines
1427 targets
:= $(wildcard $(sort $(targets
)))
1428 cmd_files
:= $(wildcard .
*.cmd
$(foreach f
,$(targets
),$(dir $(f
)).
$(notdir $(f
)).cmd
))
1430 ifneq ($(cmd_files
),)
1431 $(cmd_files
): ; # Do not try to update included dependency files
1432 include $(cmd_files
)
1435 # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
1437 # $(Q)$(MAKE) $(clean)=dir
1438 clean := -f
$(if
$(KBUILD_SRC
),$(srctree
)/)scripts
/Makefile.
clean obj
1440 endif # skip-makefile
1445 # Declare the contents of the .PHONY variable as phony. We keep that
1446 # information in a variable so we can use it in if_changed and friends.