Makefile

   1 #
   2 # (C) Copyright 2000-2004
   3 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4 #
   5 # See file CREDITS for list of people who contributed to this
   6 # project.
   7 #
   8 # This program is free software; you can redistribute it and/or
   9 # modify it under the terms of the GNU General Public License as
  10 # published by the Free Software Foundation; either version 2 of
  11 # the License, or (at your option) any later version.
  12 #
  13 # This program is distributed in the hope that it will be useful,
  14 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  15 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16 # GNU General Public License for more details.
  17 #
  18 # You should have received a copy of the GNU General Public License
  19 # along with this program; if not, write to the Free Software
  20 # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21 # MA 02111-1307 USA
  22 #
  23
  24 HOSTARCH := $(shell uname -m | \
  25         sed -e s/i.86/i386/ \
  26             -e s/sun4u/sparc64/ \
  27             -e s/arm.*/arm/ \
  28             -e s/sa110/arm/ \
  29             -e s/powerpc/ppc/ \
  30             -e s/macppc/ppc/)
  31
  32 HOSTOS := $(shell uname -s | tr A-Z a-z | \
  33             sed -e 's/\(cygwin\).*/cygwin/')
  34
  35 export  HOSTARCH
  36
  37 # Deal with colliding definitions from tcsh etc.
  38 VENDOR=
  39
  40 #########################################################################
  41
  42 TOPDIR  := $(shell if [ "$$PWD" != "" ]; then echo $$PWD; else pwd; fi)
  43 export  TOPDIR
  44
  45 ifeq (include/config.mk,$(wildcard include/config.mk))
  46 # load ARCH, BOARD, and CPU configuration
  47 include include/config.mk
  48 export  ARCH CPU BOARD VENDOR SOC
  49 # load other configuration
  50 include $(TOPDIR)/config.mk
  51
  52 ifndef CROSS_COMPILE
  53 ifeq ($(HOSTARCH),ppc)
  54 CROSS_COMPILE =
  55 else
  56 ifeq ($(ARCH),ppc)
  57 CROSS_COMPILE = ppc_8xx-
  58 endif
  59 ifeq ($(ARCH),arm)
  60 CROSS_COMPILE = arm-linux-
  61 endif
  62 ifeq ($(ARCH),i386)
  63 ifeq ($(HOSTARCH),i386)
  64 CROSS_COMPILE =
  65 else
  66 CROSS_COMPILE = i386-linux-
  67 endif
  68 endif
  69 ifeq ($(ARCH),mips)
  70 CROSS_COMPILE = mips_4KC-
  71 endif
  72 ifeq ($(ARCH),nios)
  73 CROSS_COMPILE = nios-elf-
  74 endif
  75 ifeq ($(ARCH),nios2)
  76 CROSS_COMPILE = nios2-elf-
  77 endif
  78 ifeq ($(ARCH),m68k)
  79 CROSS_COMPILE = m68k-elf-
  80 endif
  81 ifeq ($(ARCH),microblaze)
  82 CROSS_COMPILE = mb-
  83 endif
  84 endif
  85 endif
  86
  87 export  CROSS_COMPILE
  88
  89 #########################################################################
  90 # U-Boot objects....order is important (i.e. start must be first)
  91
  92 OBJS  = cpu/$(CPU)/start.o
  93 ifeq ($(CPU),i386)
  94 OBJS += cpu/$(CPU)/start16.o
  95 OBJS += cpu/$(CPU)/reset.o
  96 endif
  97 ifeq ($(CPU),ppc4xx)
  98 OBJS += cpu/$(CPU)/resetvec.o
  99 endif
 100 ifeq ($(CPU),mpc85xx)
 101 OBJS += cpu/$(CPU)/resetvec.o
 102 endif
 103
 104 LIBS  = lib_generic/libgeneric.a
 105 LIBS += board/$(BOARDDIR)/lib$(BOARD).a
 106 LIBS += cpu/$(CPU)/lib$(CPU).a
 107 ifdef SOC
 108 LIBS += cpu/$(CPU)/$(SOC)/lib$(SOC).a
 109 endif
 110 LIBS += lib_$(ARCH)/lib$(ARCH).a
 111 LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \
 112         fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a
 113 LIBS += net/libnet.a
 114 LIBS += disk/libdisk.a
 115 LIBS += rtc/librtc.a
 116 LIBS += dtt/libdtt.a
 117 LIBS += drivers/libdrivers.a
 118 LIBS += drivers/sk98lin/libsk98lin.a
 119 LIBS += post/libpost.a post/cpu/libcpu.a
 120 LIBS += common/libcommon.a
 121 .PHONY : $(LIBS)
 122
 123 # Add GCC lib
 124 PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
 125
 126
 127 # The "tools" are needed early, so put this first
 128 # Don't include stuff already done in $(LIBS)
 129 SUBDIRS = tools \
 130           examples \
 131           post \
 132           post/cpu
 133 .PHONY : $(SUBDIRS)
 134
 135 #########################################################################
 136 #########################################################################
 137
 138 ALL = u-boot.srec u-boot.bin System.map
 139
 140 all:            $(ALL)
 141
 142 u-boot.hex:     u-boot
 143                 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@
 144
 145 u-boot.srec:    u-boot
 146                 $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@
 147
 148 u-boot.bin:     u-boot
 149                 $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
 150
 151 u-boot.img:     u-boot.bin
 152                 ./tools/mkimage -A $(ARCH) -T firmware -C none \
 153                 -a $(TEXT_BASE) -e 0 \
 154                 -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' include/version.h | \
 155                         sed -e 's/"[     ]*$$/ for $(BOARD) board"/') \
 156                 -d $< $@
 157
 158 u-boot.dis:     u-boot
 159                 $(OBJDUMP) -d $< > $@
 160
 161 u-boot:         depend $(SUBDIRS) $(OBJS) $(LIBS) $(LDSCRIPT)
 162                 UNDEF_SYM=`$(OBJDUMP) -x $(LIBS) |sed  -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
 163                 $(LD) $(LDFLAGS) $$UNDEF_SYM $(OBJS) \
 164                         --start-group $(LIBS) --end-group $(PLATFORM_LIBS) \
 165                         -Map u-boot.map -o u-boot
 166
 167 $(LIBS):
 168                 $(MAKE) -C `dirname $@`
 169
 170 $(SUBDIRS):
 171                 $(MAKE) -C $@ all
 172
 173 gdbtools:
 174                 $(MAKE) -C tools/gdb || exit 1
 175
 176 depend dep:
 177                 @for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir .depend ; done
 178
 179 tags:
 180                 ctags -w `find $(SUBDIRS) include \
 181                                 lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \
 182                                 fs/cramfs fs/fat fs/fdos fs/jffs2 \
 183                                 net disk rtc dtt drivers drivers/sk98lin common \
 184                         \( -name CVS -prune \) -o \( -name '*.[ch]' -print \)`
 185
 186 etags:
 187                 etags -a `find $(SUBDIRS) include \
 188                                 lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \
 189                                 fs/cramfs fs/fat fs/fdos fs/jffs2 \
 190                                 net disk rtc dtt drivers drivers/sk98lin common \
 191                         \( -name CVS -prune \) -o \( -name '*.[ch]' -print \)`
 192
 193 System.map:     u-boot
 194                 @$(NM) $< | \
 195                 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
 196                 sort > System.map
 197
 198 #########################################################################
 199 else
 200 all install u-boot u-boot.srec depend dep:
 201         @echo "System not configured - see README" >&2
 202         @ exit 1
 203 endif
 204
 205 #########################################################################
 206
 207 unconfig:
 208         @rm -f include/config.h include/config.mk board/*/config.tmp
 209
 210 #========================================================================
 211 # PowerPC
 212 #========================================================================
 213
 214 #########################################################################
 215 ## MPC5xx Systems
 216 #########################################################################
 217
 218 cmi_mpc5xx_config:      unconfig
 219         @./mkconfig $(@:_config=) ppc mpc5xx cmi
 220
 221 PATI_config:            unconfig
 222         @./mkconfig $(@:_config=) ppc mpc5xx pati mpl
 223
 224 #########################################################################
 225 ## MPC5xxx Systems
 226 #########################################################################
 227 Lite5200_config                         \
 228 Lite5200_LOWBOOT_config                 \
 229 Lite5200_LOWBOOT08_config               \
 230 icecube_5200_config                     \
 231 icecube_5200_LOWBOOT_config             \
 232 icecube_5200_LOWBOOT08_config           \
 233 icecube_5200_DDR_config                 \
 234 icecube_5200_DDR_LOWBOOT_config         \
 235 icecube_5200_DDR_LOWBOOT08_config       \
 236 icecube_5100_config:                    unconfig
 237         @ >include/config.h
 238         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 239                 { if [ "$(findstring DDR,$@)" ] ; \
 240                         then echo "TEXT_BASE = 0xFF800000" >board/icecube/config.tmp ; \
 241                         else echo "TEXT_BASE = 0xFF000000" >board/icecube/config.tmp ; \
 242                   fi ; \
 243                   echo "... with LOWBOOT configuration" ; \
 244                 }
 245         @[ -z "$(findstring LOWBOOT08,$@)" ] || \
 246                 { echo "TEXT_BASE = 0xFF800000" >board/icecube/config.tmp ; \
 247                   echo "... with 8 MB flash only" ; \
 248                   echo "... with LOWBOOT configuration" ; \
 249                 }
 250         @[ -z "$(findstring DDR,$@)" ] || \
 251                 { echo "#define CONFIG_MPC5200_DDR"     >>include/config.h ; \
 252                   echo "... DDR memory revision" ; \
 253                 }
 254         @[ -z "$(findstring 5200,$@)" ] || \
 255                 { echo "#define CONFIG_MPC5200"         >>include/config.h ; \
 256                   echo "... with MPC5200 processor" ; \
 257                 }
 258         @[ -z "$(findstring 5100,$@)" ] || \
 259                 { echo "#define CONFIG_MGT5100"         >>include/config.h ; \
 260                   echo "... with MGT5100 processor" ; \
 261                 }
 262         @./mkconfig -a IceCube ppc mpc5xxx icecube
 263
 264 inka4x0_config:         unconfig
 265         @./mkconfig inka4x0 ppc mpc5xxx inka4x0
 266
 267 PM520_config \
 268 PM520_DDR_config \
 269 PM520_ROMBOOT_config \
 270 PM520_ROMBOOT_DDR_config:       unconfig
 271         @ >include/config.h
 272         @[ -z "$(findstring DDR,$@)" ] || \
 273                 { echo "#define CONFIG_MPC5200_DDR"     >>include/config.h ; \
 274                   echo "... DDR memory revision" ; \
 275                 }
 276         @[ -z "$(findstring ROMBOOT,$@)" ] || \
 277                 { echo "#define CONFIG_BOOT_ROM" >>include/config.h ; \
 278                   echo "... booting from 8-bit flash" ; \
 279                 }
 280         @./mkconfig -a PM520 ppc mpc5xxx pm520
 281
 282 MINI5200_config \
 283 EVAL5200_config \
 284 TOP5200_config: unconfig
 285         @ echo "#define CONFIG_$(@:_config=) 1" >include/config.h
 286         @./mkconfig -a TOP5200 ppc mpc5xxx top5200 emk
 287
 288 Total5100_config                \
 289 Total5200_config                \
 290 Total5200_lowboot_config        \
 291 Total5200_Rev2_config           \
 292 Total5200_Rev2_lowboot_config:  unconfig
 293         @ >include/config.h
 294         @[ -z "$(findstring 5100,$@)" ] || \
 295                 { echo "#define CONFIG_MGT5100"         >>include/config.h ; \
 296                   echo "... with MGT5100 processor" ; \
 297                 }
 298         @[ -z "$(findstring 5200,$@)" ] || \
 299                 { echo "#define CONFIG_MPC5200"         >>include/config.h ; \
 300                   echo "... with MPC5200 processor" ; \
 301                 }
 302         @[ -n "$(findstring Rev,$@)" ] || \
 303                 { echo "#define CONFIG_TOTAL5200_REV 1" >>include/config.h ; \
 304                   echo "... revision 1 board" ; \
 305                 }
 306         @[ -z "$(findstring Rev2_,$@)" ] || \
 307                 { echo "#define CONFIG_TOTAL5200_REV 2" >>include/config.h ; \
 308                   echo "... revision 2 board" ; \
 309                 }
 310         @[ -z "$(findstring lowboot_,$@)" ] || \
 311                 { echo "TEXT_BASE = 0xFE000000" >board/total5200/config.tmp ; \
 312                   echo "... with lowboot configuration" ; \
 313                 }
 314         @./mkconfig -a Total5200 ppc mpc5xxx total5200
 315
 316 TQM5200_auto_config             \
 317 TQM5200_AA_config       \
 318 TQM5200_AB_config       \
 319 TQM5200_AC_config       \
 320 MiniFAP_config: unconfig
 321         @ >include/config.h
 322         @[ -z "$(findstring MiniFAP,$@)" ] || \
 323                 { echo "#define CONFIG_MINIFAP" >>include/config.h ; \
 324                   echo "#define CONFIG_TQM5200_AC"      >>include/config.h ; \
 325                   echo "... TQM5200_AC on MiniFAP" ; \
 326                 }
 327         @[ -z "$(findstring AA,$@)" ] || \
 328                 { echo "#define CONFIG_TQM5200_AA"      >>include/config.h ; \
 329                   echo "... with 4 MB Flash, 16 MB SDRAM, 32 kB EEPROM" ; \
 330                 }
 331         @[ -z "$(findstring AB,$@)" ] || \
 332                 { echo "#define CONFIG_TQM5200_AB"      >>include/config.h ; \
 333                   echo "... with 64 MB Flash, 64 MB SDRAM, 32 kB EEPROM, 512 kB SRAM" ; \
 334                   echo "... with Graphics Controller"; \
 335                 }
 336         @[ -z "$(findstring AC,$@)" ] || \
 337                 { echo "#define CONFIG_TQM5200_AC"      >>include/config.h ; \
 338                   echo "... with 4 MB Flash, 128 MB SDRAM" ; \
 339                   echo "... with Graphics Controller"; \
 340                 }
 341         @[ -z "$(findstring auto,$@)" ] || \
 342                 { echo "#define CONFIG_CS_AUTOCONF"     >>include/config.h ; \
 343                   echo "... with automatic CS configuration" ; \
 344                 }
 345         @./mkconfig -a TQM5200 ppc mpc5xxx tqm5200
 346
 347 #########################################################################
 348 ## MPC8xx Systems
 349 #########################################################################
 350
 351 Adder_config    \
 352 Adder87x_config \
 353 AdderII_config  \
 354         :               unconfig
 355         $(if $(findstring AdderII,$@), \
 356         @echo "#define CONFIG_MPC852T" > include/config.h)
 357         @./mkconfig -a Adder ppc mpc8xx adder
 358
 359 ADS860_config     \
 360 FADS823_config    \
 361 FADS850SAR_config \
 362 MPC86xADS_config  \
 363 MPC885ADS_config  \
 364 FADS860T_config:        unconfig
 365         @./mkconfig $(@:_config=) ppc mpc8xx fads
 366
 367 AMX860_config   :       unconfig
 368         @./mkconfig $(@:_config=) ppc mpc8xx amx860 westel
 369
 370 c2mon_config:           unconfig
 371         @./mkconfig $(@:_config=) ppc mpc8xx c2mon
 372
 373 CCM_config:             unconfig
 374         @./mkconfig $(@:_config=) ppc mpc8xx CCM siemens
 375
 376 cogent_mpc8xx_config:   unconfig
 377         @./mkconfig $(@:_config=) ppc mpc8xx cogent
 378
 379 ELPT860_config:         unconfig
 380         @./mkconfig $(@:_config=) ppc mpc8xx elpt860 LEOX
 381
 382 ESTEEM192E_config:      unconfig
 383         @./mkconfig $(@:_config=) ppc mpc8xx esteem192e
 384
 385 ETX094_config   :       unconfig
 386         @./mkconfig $(@:_config=) ppc mpc8xx etx094
 387
 388 FLAGADM_config: unconfig
 389         @./mkconfig $(@:_config=) ppc mpc8xx flagadm
 390
 391 xtract_GEN860T = $(subst _SC,,$(subst _config,,$1))
 392
 393 GEN860T_SC_config       \
 394 GEN860T_config: unconfig
 395         @ >include/config.h
 396         @[ -z "$(findstring _SC,$@)" ] || \
 397                 { echo "#define CONFIG_SC" >>include/config.h ; \
 398                   echo "With reduced H/W feature set (SC)..." ; \
 399                 }
 400         @./mkconfig -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t
 401
 402 GENIETV_config: unconfig
 403         @./mkconfig $(@:_config=) ppc mpc8xx genietv
 404
 405 GTH_config:     unconfig
 406         @./mkconfig $(@:_config=) ppc mpc8xx gth
 407
 408 hermes_config   :       unconfig
 409         @./mkconfig $(@:_config=) ppc mpc8xx hermes
 410
 411 HMI10_config    :       unconfig
 412         @./mkconfig $(@:_config=) ppc mpc8xx tqm8xx
 413
 414 IAD210_config: unconfig
 415         @./mkconfig $(@:_config=) ppc mpc8xx IAD210 siemens
 416
 417 xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1))
 418
 419 ICU862_100MHz_config    \
 420 ICU862_config: unconfig
 421         @ >include/config.h
 422         @[ -z "$(findstring _100MHz,$@)" ] || \
 423                 { echo "#define CONFIG_100MHz"  >>include/config.h ; \
 424                   echo "... with 100MHz system clock" ; \
 425                 }
 426         @./mkconfig -a $(call xtract_ICU862,$@) ppc mpc8xx icu862
 427
 428 IP860_config    :       unconfig
 429         @./mkconfig $(@:_config=) ppc mpc8xx ip860
 430
 431 IVML24_256_config \
 432 IVML24_128_config \
 433 IVML24_config:  unconfig
 434         @ >include/config.h
 435         @[ -z "$(findstring IVML24_config,$@)" ] || \
 436                  { echo "#define CONFIG_IVML24_16M"     >>include/config.h ; \
 437                  }
 438         @[ -z "$(findstring IVML24_128_config,$@)" ] || \
 439                  { echo "#define CONFIG_IVML24_32M"     >>include/config.h ; \
 440                  }
 441         @[ -z "$(findstring IVML24_256_config,$@)" ] || \
 442                  { echo "#define CONFIG_IVML24_64M"     >>include/config.h ; \
 443                  }
 444         @./mkconfig -a IVML24 ppc mpc8xx ivm
 445
 446 IVMS8_256_config \
 447 IVMS8_128_config \
 448 IVMS8_config:   unconfig
 449         @ >include/config.h
 450         @[ -z "$(findstring IVMS8_config,$@)" ] || \
 451                  { echo "#define CONFIG_IVMS8_16M"      >>include/config.h ; \
 452                  }
 453         @[ -z "$(findstring IVMS8_128_config,$@)" ] || \
 454                  { echo "#define CONFIG_IVMS8_32M"      >>include/config.h ; \
 455                  }
 456         @[ -z "$(findstring IVMS8_256_config,$@)" ] || \
 457                  { echo "#define CONFIG_IVMS8_64M"      >>include/config.h ; \
 458                  }
 459         @./mkconfig -a IVMS8 ppc mpc8xx ivm
 460
 461 KUP4K_config    :       unconfig
 462         @./mkconfig $(@:_config=) ppc mpc8xx kup4k kup
 463
 464 KUP4X_config    :       unconfig
 465         @./mkconfig $(@:_config=) ppc mpc8xx kup4x kup
 466
 467 LANTEC_config   :       unconfig
 468         @./mkconfig $(@:_config=) ppc mpc8xx lantec
 469
 470 lwmon_config:           unconfig
 471         @./mkconfig $(@:_config=) ppc mpc8xx lwmon
 472
 473 MBX_config      \
 474 MBX860T_config: unconfig
 475         @./mkconfig $(@:_config=) ppc mpc8xx mbx8xx
 476
 477 MHPC_config:            unconfig
 478         @./mkconfig $(@:_config=) ppc mpc8xx mhpc eltec
 479
 480 MVS1_config :           unconfig
 481         @./mkconfig $(@:_config=) ppc mpc8xx mvs1
 482
 483 xtract_NETVIA = $(subst _V2,,$(subst _config,,$1))
 484
 485 NETVIA_V2_config \
 486 NETVIA_config:          unconfig
 487         @ >include/config.h
 488         @[ -z "$(findstring NETVIA_config,$@)" ] || \
 489                  { echo "#define CONFIG_NETVIA_VERSION 1" >>include/config.h ; \
 490                   echo "... Version 1" ; \
 491                  }
 492         @[ -z "$(findstring NETVIA_V2_config,$@)" ] || \
 493                  { echo "#define CONFIG_NETVIA_VERSION 2" >>include/config.h ; \
 494                   echo "... Version 2" ; \
 495                  }
 496         @./mkconfig -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia
 497
 498 xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1))
 499
 500 NETPHONE_V2_config \
 501 NETPHONE_config:        unconfig
 502         @ >include/config.h
 503         @[ -z "$(findstring NETPHONE_config,$@)" ] || \
 504                  { echo "#define CONFIG_NETPHONE_VERSION 1" >>include/config.h ; \
 505                  }
 506         @[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \
 507                  { echo "#define CONFIG_NETPHONE_VERSION 2" >>include/config.h ; \
 508                  }
 509         @./mkconfig -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone
 510
 511 xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1))))
 512
 513 NETTA_ISDN_6412_SWAPHOOK_config \
 514 NETTA_ISDN_SWAPHOOK_config \
 515 NETTA_6412_SWAPHOOK_config \
 516 NETTA_SWAPHOOK_config \
 517 NETTA_ISDN_6412_config \
 518 NETTA_ISDN_config \
 519 NETTA_6412_config \
 520 NETTA_config:           unconfig
 521         @ >include/config.h
 522         @[ -z "$(findstring ISDN_,$@)" ] || \
 523                  { echo "#define CONFIG_NETTA_ISDN 1" >>include/config.h ; \
 524                  }
 525         @[ -n "$(findstring ISDN_,$@)" ] || \
 526                  { echo "#undef CONFIG_NETTA_ISDN" >>include/config.h ; \
 527                  }
 528         @[ -z "$(findstring 6412_,$@)" ] || \
 529                  { echo "#define CONFIG_NETTA_6412 1" >>include/config.h ; \
 530                  }
 531         @[ -n "$(findstring 6412_,$@)" ] || \
 532                  { echo "#undef CONFIG_NETTA_6412" >>include/config.h ; \
 533                  }
 534         @[ -z "$(findstring SWAPHOOK_,$@)" ] || \
 535                  { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>include/config.h ; \
 536                  }
 537         @[ -n "$(findstring SWAPHOOK_,$@)" ] || \
 538                  { echo "#undef CONFIG_NETTA_SWAPHOOK" >>include/config.h ; \
 539                  }
 540         @./mkconfig -a $(call xtract_NETTA,$@) ppc mpc8xx netta
 541
 542 xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1))
 543
 544 NETTA2_V2_config \
 545 NETTA2_config:          unconfig
 546         @ >include/config.h
 547         @[ -z "$(findstring NETTA2_config,$@)" ] || \
 548                  { echo "#define CONFIG_NETTA2_VERSION 1" >>include/config.h ; \
 549                  }
 550         @[ -z "$(findstring NETTA2_V2_config,$@)" ] || \
 551                  { echo "#define CONFIG_NETTA2_VERSION 2" >>include/config.h ; \
 552                  }
 553         @./mkconfig -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2
 554
 555 NC650_config:   unconfig
 556         @./mkconfig $(@:_config=) ppc mpc8xx nc650
 557
 558 NX823_config:           unconfig
 559         @./mkconfig $(@:_config=) ppc mpc8xx nx823
 560
 561 pcu_e_config:           unconfig
 562         @./mkconfig $(@:_config=) ppc mpc8xx pcu_e siemens
 563
 564 QS850_config:   unconfig
 565         @./mkconfig $(@:_config=) ppc mpc8xx qs850 snmc
 566
 567 QS823_config:   unconfig
 568         @./mkconfig $(@:_config=) ppc mpc8xx qs850 snmc
 569
 570 QS860T_config:  unconfig
 571         @./mkconfig $(@:_config=) ppc mpc8xx qs860t snmc
 572
 573 quantum_config: unconfig
 574         @./mkconfig $(@:_config=) ppc mpc8xx quantum
 575
 576 R360MPI_config: unconfig
 577         @./mkconfig $(@:_config=) ppc mpc8xx r360mpi
 578
 579 RBC823_config:  unconfig
 580         @./mkconfig $(@:_config=) ppc mpc8xx rbc823
 581
 582 RPXClassic_config:      unconfig
 583         @./mkconfig $(@:_config=) ppc mpc8xx RPXClassic
 584
 585 RPXlite_config:         unconfig
 586         @./mkconfig $(@:_config=) ppc mpc8xx RPXlite
 587
 588 RPXlite_DW_64_config            \
 589 RPXlite_DW_LCD_config           \
 590 RPXlite_DW_64_LCD_config        \
 591 RPXlite_DW_NVRAM_config         \
 592 RPXlite_DW_NVRAM_64_config      \
 593 RPXlite_DW_NVRAM_LCD_config     \
 594 RPXlite_DW_NVRAM_64_LCD_config  \
 595 RPXlite_DW_config:         unconfig
 596         @ >include/config.h
 597         @[ -z "$(findstring _64,$@)" ] || \
 598                 { echo "#define RPXlite_64MHz"          >>include/config.h ; \
 599                   echo "... with 64MHz system clock ..."; \
 600                 }
 601         @[ -z "$(findstring _LCD,$@)" ] || \
 602                 { echo "#define CONFIG_LCD"             >>include/config.h ; \
 603                   echo "#define CONFIG_NEC_NL6448BC20"  >>include/config.h ; \
 604                   echo "... with LCD display ..."; \
 605                 }
 606         @[ -z "$(findstring _NVRAM,$@)" ] || \
 607                 { echo "#define  CFG_ENV_IS_IN_NVRAM"   >>include/config.h ; \
 608                   echo "... with ENV in NVRAM ..."; \
 609                 }
 610         @./mkconfig -a RPXlite_DW ppc mpc8xx RPXlite_dw
 611
 612 rmu_config:     unconfig
 613         @./mkconfig $(@:_config=) ppc mpc8xx rmu
 614
 615 RRvision_config:        unconfig
 616         @./mkconfig $(@:_config=) ppc mpc8xx RRvision
 617
 618 RRvision_LCD_config:    unconfig
 619         @echo "#define CONFIG_LCD" >include/config.h
 620         @echo "#define CONFIG_SHARP_LQ104V7DS01" >>include/config.h
 621         @./mkconfig -a RRvision ppc mpc8xx RRvision
 622
 623 SM850_config    :       unconfig
 624         @./mkconfig $(@:_config=) ppc mpc8xx tqm8xx
 625
 626 SPD823TS_config:        unconfig
 627         @./mkconfig $(@:_config=) ppc mpc8xx spd8xx
 628
 629 svm_sc8xx_config:       unconfig
 630         @ >include/config.h
 631         @./mkconfig $(@:_config=) ppc mpc8xx svm_sc8xx
 632
 633 SXNI855T_config:        unconfig
 634         @./mkconfig $(@:_config=) ppc mpc8xx sixnet
 635
 636 # EMK MPC8xx based modules
 637 TOP860_config:          unconfig
 638         @./mkconfig $(@:_config=) ppc mpc8xx top860 emk
 639
 640 # Play some tricks for configuration selection
 641 # Only 855 and 860 boards may come with FEC
 642 # and only 823 boards may have LCD support
 643 xtract_8xx = $(subst _LCD,,$(subst _config,,$1))
 644
 645 FPS850L_config          \
 646 FPS860L_config          \
 647 NSCU_config             \
 648 TQM823L_config          \
 649 TQM823L_LCD_config      \
 650 TQM850L_config          \
 651 TQM855L_config          \
 652 TQM860L_config          \
 653 TQM862L_config          \
 654 TQM823M_config          \
 655 TQM850M_config          \
 656 TQM855M_config          \
 657 TQM860M_config          \
 658 TQM862M_config          \
 659 TQM866M_config:         unconfig
 660         @ >include/config.h
 661         @[ -z "$(findstring _LCD,$@)" ] || \
 662                 { echo "#define CONFIG_LCD"             >>include/config.h ; \
 663                   echo "#define CONFIG_NEC_NL6448BC20"  >>include/config.h ; \
 664                   echo "... with LCD display" ; \
 665                 }
 666         @./mkconfig -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx
 667
 668 TTTech_config:  unconfig
 669         @echo "#define CONFIG_LCD" >include/config.h
 670         @echo "#define CONFIG_SHARP_LQ104V7DS01" >>include/config.h
 671         @./mkconfig -a TQM823L ppc mpc8xx tqm8xx
 672
 673 uc100_config    :       unconfig
 674         @./mkconfig $(@:_config=) ppc mpc8xx uc100
 675
 676 v37_config:     unconfig
 677         @echo "#define CONFIG_LCD" >include/config.h
 678         @echo "#define CONFIG_SHARP_LQ084V1DG21" >>include/config.h
 679         @./mkconfig $(@:_config=) ppc mpc8xx v37
 680
 681 wtk_config:     unconfig
 682         @echo "#define CONFIG_LCD" >include/config.h
 683         @echo "#define CONFIG_SHARP_LQ065T9DR51U" >>include/config.h
 684         @./mkconfig -a TQM823L ppc mpc8xx tqm8xx
 685
 686 #########################################################################
 687 ## PPC4xx Systems
 688 #########################################################################
 689 xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1))))))
 690
 691 ADCIOP_config:  unconfig
 692         @./mkconfig $(@:_config=) ppc ppc4xx adciop esd
 693
 694 APC405_config:  unconfig
 695         @./mkconfig $(@:_config=) ppc ppc4xx apc405 esd
 696
 697 AR405_config:   unconfig
 698         @./mkconfig $(@:_config=) ppc ppc4xx ar405 esd
 699
 700 ASH405_config:  unconfig
 701         @./mkconfig $(@:_config=) ppc ppc4xx ash405 esd
 702
 703 BUBINGA405EP_config:    unconfig
 704         @./mkconfig $(@:_config=) ppc ppc4xx bubinga405ep
 705
 706 CANBT_config:   unconfig
 707         @./mkconfig $(@:_config=) ppc ppc4xx canbt esd
 708
 709 CATcenter_config        \
 710 CATcenter_25_config     \
 711 CATcenter_33_config:    unconfig
 712         @ echo "/* CATcenter uses PPChameleon Model ME */"  > include/config.h
 713         @ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> include/config.h
 714         @[ -z "$(findstring _25,$@)" ] || \
 715                 { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>include/config.h ; \
 716                   echo "SysClk = 25MHz" ; \
 717                 }
 718         @[ -z "$(findstring _33,$@)" ] || \
 719                 { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>include/config.h ; \
 720                   echo "SysClk = 33MHz" ; \
 721                 }
 722         @./mkconfig -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
 723
 724 CPCI405_config  \
 725 CPCI4052_config \
 726 CPCI405DT_config        \
 727 CPCI405AB_config:       unconfig
 728         @./mkconfig $(@:_config=) ppc ppc4xx cpci405 esd
 729         @echo "BOARD_REVISION = $(@:_config=)"  >>include/config.mk
 730
 731 CPCI440_config: unconfig
 732         @./mkconfig $(@:_config=) ppc ppc4xx cpci440 esd
 733
 734 CPCIISER4_config:       unconfig
 735         @./mkconfig $(@:_config=) ppc ppc4xx cpciiser4 esd
 736
 737 CRAYL1_config:  unconfig
 738         @./mkconfig $(@:_config=) ppc ppc4xx L1 cray
 739
 740 csb272_config:  unconfig
 741         @./mkconfig $(@:_config=) ppc ppc4xx csb272
 742
 743 csb472_config:  unconfig
 744         @./mkconfig $(@:_config=) ppc ppc4xx csb472
 745
 746 DASA_SIM_config: unconfig
 747         @./mkconfig $(@:_config=) ppc ppc4xx dasa_sim esd
 748
 749 DP405_config:   unconfig
 750         @./mkconfig $(@:_config=) ppc ppc4xx dp405 esd
 751
 752 DU405_config:   unconfig
 753         @./mkconfig $(@:_config=) ppc ppc4xx du405 esd
 754
 755 EBONY_config:   unconfig
 756         @./mkconfig $(@:_config=) ppc ppc4xx ebony
 757
 758 ERIC_config:    unconfig
 759         @./mkconfig $(@:_config=) ppc ppc4xx eric
 760
 761 EXBITGEN_config:        unconfig
 762         @./mkconfig $(@:_config=) ppc ppc4xx exbitgen
 763
 764 G2000_config:   unconfig
 765         @./mkconfig $(@:_config=) ppc ppc4xx g2000
 766
 767 HH405_config:   unconfig
 768         @./mkconfig $(@:_config=) ppc ppc4xx hh405 esd
 769
 770 HUB405_config:  unconfig
 771         @./mkconfig $(@:_config=) ppc ppc4xx hub405 esd
 772
 773 JSE_config:     unconfig
 774         @./mkconfig $(@:_config=) ppc ppc4xx jse
 775
 776 MIP405_config:  unconfig
 777         @./mkconfig $(@:_config=) ppc ppc4xx mip405 mpl
 778
 779 MIP405T_config: unconfig
 780         @echo "#define CONFIG_MIP405T" >include/config.h
 781         @echo "Enable subset config for MIP405T"
 782         @./mkconfig -a MIP405 ppc ppc4xx mip405 mpl
 783
 784 ML2_config:     unconfig
 785         @./mkconfig $(@:_config=) ppc ppc4xx ml2
 786
 787 ml300_config:   unconfig
 788         @./mkconfig $(@:_config=) ppc ppc4xx ml300 xilinx
 789
 790 OCOTEA_config:  unconfig
 791         @./mkconfig $(@:_config=) ppc ppc4xx ocotea
 792
 793 OCRTC_config            \
 794 ORSG_config:    unconfig
 795         @./mkconfig $(@:_config=) ppc ppc4xx ocrtc esd
 796
 797 PCI405_config:  unconfig
 798         @./mkconfig $(@:_config=) ppc ppc4xx pci405 esd
 799
 800 PIP405_config:  unconfig
 801         @./mkconfig $(@:_config=) ppc ppc4xx pip405 mpl
 802
 803 PLU405_config:  unconfig
 804         @./mkconfig $(@:_config=) ppc ppc4xx plu405 esd
 805
 806 PMC405_config:  unconfig
 807         @./mkconfig $(@:_config=) ppc ppc4xx pmc405 esd
 808
 809 PPChameleonEVB_config           \
 810 PPChameleonEVB_BA_25_config     \
 811 PPChameleonEVB_ME_25_config     \
 812 PPChameleonEVB_HI_25_config     \
 813 PPChameleonEVB_BA_33_config     \
 814 PPChameleonEVB_ME_33_config     \
 815 PPChameleonEVB_HI_33_config:    unconfig
 816         @ >include/config.h
 817         @[ -z "$(findstring EVB_BA,$@)" ] || \
 818                 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>include/config.h ; \
 819                   echo "... BASIC model" ; \
 820                 }
 821         @[ -z "$(findstring EVB_ME,$@)" ] || \
 822                 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>include/config.h ; \
 823                   echo "... MEDIUM model" ; \
 824                 }
 825         @[ -z "$(findstring EVB_HI,$@)" ] || \
 826                 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>include/config.h ; \
 827                   echo "... HIGH-END model" ; \
 828                 }
 829         @[ -z "$(findstring _25,$@)" ] || \
 830                 { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>include/config.h ; \
 831                   echo "SysClk = 25MHz" ; \
 832                 }
 833         @[ -z "$(findstring _33,$@)" ] || \
 834                 { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>include/config.h ; \
 835                   echo "SysClk = 33MHz" ; \
 836                 }
 837         @./mkconfig -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
 838
 839 sbc405_config:  unconfig
 840         @./mkconfig $(@:_config=) ppc ppc4xx sbc405
 841
 842 VOH405_config:  unconfig
 843         @./mkconfig $(@:_config=) ppc ppc4xx voh405 esd
 844
 845 VOM405_config:  unconfig
 846         @./mkconfig $(@:_config=) ppc ppc4xx vom405 esd
 847
 848 W7OLMC_config   \
 849 W7OLMG_config: unconfig
 850         @./mkconfig $(@:_config=) ppc ppc4xx w7o
 851
 852 WALNUT405_config:       unconfig
 853         @./mkconfig $(@:_config=) ppc ppc4xx walnut405
 854
 855 WUH405_config:  unconfig
 856         @./mkconfig $(@:_config=) ppc ppc4xx wuh405 esd
 857
 858 XPEDITE1K_config:       unconfig
 859         @./mkconfig $(@:_config=) ppc ppc4xx xpedite1k
 860
 861 #########################################################################
 862 ## MPC8220 Systems
 863 #########################################################################
 864 Alaska8220_config:      unconfig
 865         @./mkconfig $(@:_config=) ppc mpc8220 alaska
 866
 867 Yukon8220_config:       unconfig
 868         @./mkconfig $(@:_config=) ppc mpc8220 yukon
 869
 870 #########################################################################
 871 ## MPC824x Systems
 872 #########################################################################
 873 xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1))))))
 874
 875 A3000_config: unconfig
 876         @./mkconfig $(@:_config=) ppc mpc824x a3000
 877
 878 BMW_config: unconfig
 879         @./mkconfig $(@:_config=) ppc mpc824x bmw
 880
 881 CPC45_config    \
 882 CPC45_ROMBOOT_config:   unconfig
 883         @./mkconfig $(call xtract_82xx,$@) ppc mpc824x cpc45
 884         @cd ./include ;                         \
 885         if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
 886                 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
 887                 echo "... booting from 8-bit flash" ; \
 888         else \
 889                 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
 890                 echo "... booting from 64-bit flash" ; \
 891         fi; \
 892         echo "export CONFIG_BOOT_ROM" >> config.mk;
 893
 894 CU824_config: unconfig
 895         @./mkconfig $(@:_config=) ppc mpc824x cu824
 896
 897 debris_config: unconfig
 898         @./mkconfig $(@:_config=) ppc mpc824x debris etin
 899
 900 eXalion_config: unconfig
 901         @./mkconfig $(@:_config=) ppc mpc824x eXalion
 902
 903 HIDDEN_DRAGON_config: unconfig
 904         @./mkconfig $(@:_config=) ppc mpc824x hidden_dragon
 905
 906 MOUSSE_config: unconfig
 907         @./mkconfig $(@:_config=) ppc mpc824x mousse
 908
 909 MUSENKI_config: unconfig
 910         @./mkconfig $(@:_config=) ppc mpc824x musenki
 911
 912 MVBLUE_config:  unconfig
 913         @./mkconfig $(@:_config=) ppc mpc824x mvblue
 914
 915 OXC_config: unconfig
 916         @./mkconfig $(@:_config=) ppc mpc824x oxc
 917
 918 PN62_config: unconfig
 919         @./mkconfig $(@:_config=) ppc mpc824x pn62
 920
 921 Sandpoint8240_config: unconfig
 922         @./mkconfig $(@:_config=) ppc mpc824x sandpoint
 923
 924 Sandpoint8245_config: unconfig
 925         @./mkconfig $(@:_config=) ppc mpc824x sandpoint
 926
 927 sbc8240_config: unconfig
 928         @./mkconfig $(@:_config=) ppc mpc824x sbc8240
 929
 930 SL8245_config: unconfig
 931         @./mkconfig $(@:_config=) ppc mpc824x sl8245
 932
 933 utx8245_config: unconfig
 934         @./mkconfig $(@:_config=) ppc mpc824x utx8245
 935
 936 cobra5272_config :              unconfig
 937         @./mkconfig $(@:_config=) m68k mcf52x2 cobra5272
 938
 939 #########################################################################
 940 ## MPC8260 Systems
 941 #########################################################################
 942
 943 atc_config:     unconfig
 944         @./mkconfig $(@:_config=) ppc mpc8260 atc
 945
 946 cogent_mpc8260_config:  unconfig
 947         @./mkconfig $(@:_config=) ppc mpc8260 cogent
 948
 949 CPU86_config    \
 950 CPU86_ROMBOOT_config: unconfig
 951         @./mkconfig $(call xtract_82xx,$@) ppc mpc8260 cpu86
 952         @cd ./include ;                         \
 953         if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
 954                 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
 955                 echo "... booting from 8-bit flash" ; \
 956         else \
 957                 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
 958                 echo "... booting from 64-bit flash" ; \
 959         fi; \
 960         echo "export CONFIG_BOOT_ROM" >> config.mk;
 961
 962 ep8260_config:  unconfig
 963         @./mkconfig $(@:_config=) ppc mpc8260 ep8260
 964
 965 gw8260_config:  unconfig
 966         @./mkconfig $(@:_config=) ppc mpc8260 gw8260
 967
 968 hymod_config:   unconfig
 969         @./mkconfig $(@:_config=) ppc mpc8260 hymod
 970
 971 IPHASE4539_config:      unconfig
 972         @./mkconfig $(@:_config=) ppc mpc8260 iphase4539
 973
 974 ISPAN_config            \
 975 ISPAN_REVB_config:      unconfig
 976         @if [ "$(findstring _REVB_,$@)" ] ; then \
 977                 echo "#define CFG_REV_B" > include/config.h ; \
 978         fi
 979         @./mkconfig -a ISPAN ppc mpc8260 ispan
 980
 981 MPC8260ADS_config       \
 982 MPC8260ADS_33MHz_config \
 983 MPC8260ADS_40MHz_config \
 984 MPC8272ADS_config       \
 985 PQ2FADS_config          \
 986 PQ2FADS-VR_config       \
 987 PQ2FADS-ZU_config       \
 988 PQ2FADS-ZU_66MHz_config \
 989         :               unconfig
 990         $(if $(findstring PQ2FADS,$@), \
 991         @echo "#define CONFIG_ADSTYPE CFG_PQ2FADS" > include/config.h, \
 992         @echo "#define CONFIG_ADSTYPE CFG_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > include/config.h)
 993         $(if $(findstring MHz,$@), \
 994         @echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> include/config.h, \
 995         $(if $(findstring VR,$@), \
 996         @echo "#define CONFIG_8260_CLKIN 66000000" >> include/config.h))
 997         @./mkconfig -a MPC8260ADS ppc mpc8260 mpc8260ads
 998
 999 MPC8266ADS_config:      unconfig
1000         @./mkconfig $(@:_config=) ppc mpc8260 mpc8266ads
1001
1002 # PM825/PM826 default configuration:  small (= 8 MB) Flash / boot from 64-bit flash
1003 PM825_config    \
1004 PM825_ROMBOOT_config    \
1005 PM825_BIGFLASH_config   \
1006 PM825_ROMBOOT_BIGFLASH_config   \
1007 PM826_config    \
1008 PM826_ROMBOOT_config    \
1009 PM826_BIGFLASH_config   \
1010 PM826_ROMBOOT_BIGFLASH_config:  unconfig
1011         @if [ "$(findstring PM825_,$@)" ] ; then \
1012                 echo "#define CONFIG_PCI"       >include/config.h ; \
1013         else \
1014                 >include/config.h ; \
1015         fi
1016         @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1017                 echo "... booting from 8-bit flash" ; \
1018                 echo "#define CONFIG_BOOT_ROM" >>include/config.h ; \
1019                 echo "TEXT_BASE = 0xFF800000" >board/pm826/config.tmp ; \
1020                 if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
1021                         echo "... with 32 MB Flash" ; \
1022                         echo "#define CONFIG_FLASH_32MB" >>include/config.h ; \
1023                 fi; \
1024         else \
1025                 echo "... booting from 64-bit flash" ; \
1026                 if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
1027                         echo "... with 32 MB Flash" ; \
1028                         echo "#define CONFIG_FLASH_32MB" >>include/config.h ; \
1029                         echo "TEXT_BASE = 0x40000000" >board/pm826/config.tmp ; \
1030                 else \
1031                         echo "TEXT_BASE = 0xFF000000" >board/pm826/config.tmp ; \
1032                 fi; \
1033         fi
1034         @./mkconfig -a PM826 ppc mpc8260 pm826
1035
1036 PM828_config    \
1037 PM828_PCI_config        \
1038 PM828_ROMBOOT_config    \
1039 PM828_ROMBOOT_PCI_config:       unconfig
1040         @if [ -z "$(findstring _PCI_,$@)" ] ; then \
1041                 echo "#define CONFIG_PCI"  >>include/config.h ; \
1042                 echo "... with PCI enabled" ; \
1043         else \
1044                 >include/config.h ; \
1045         fi
1046         @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1047                 echo "... booting from 8-bit flash" ; \
1048                 echo "#define CONFIG_BOOT_ROM" >>include/config.h ; \
1049                 echo "TEXT_BASE = 0xFF800000" >board/pm826/config.tmp ; \
1050         fi
1051         @./mkconfig -a PM828 ppc mpc8260 pm828
1052
1053 ppmc8260_config:        unconfig
1054         @./mkconfig $(@:_config=) ppc mpc8260 ppmc8260
1055
1056 RPXsuper_config:        unconfig
1057         @./mkconfig $(@:_config=) ppc mpc8260 rpxsuper
1058
1059 rsdproto_config:        unconfig
1060         @./mkconfig $(@:_config=) ppc mpc8260 rsdproto
1061
1062 sacsng_config:  unconfig
1063         @./mkconfig $(@:_config=) ppc mpc8260 sacsng
1064
1065 sbc8260_config: unconfig
1066         @./mkconfig $(@:_config=) ppc mpc8260 sbc8260
1067
1068 SCM_config:             unconfig
1069         @./mkconfig $(@:_config=) ppc mpc8260 SCM siemens
1070
1071 TQM8255_AA_config \
1072 TQM8260_AA_config \
1073 TQM8260_AB_config \
1074 TQM8260_AC_config \
1075 TQM8260_AD_config \
1076 TQM8260_AE_config \
1077 TQM8260_AF_config \
1078 TQM8260_AG_config \
1079 TQM8260_AH_config \
1080 TQM8265_AA_config:  unconfig
1081         @case "$@" in \
1082         TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no;  BMODE=8260;;  \
1083         TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no;  BMODE=8260;; \
1084         TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;;  \
1085         TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;;  \
1086         TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1087         TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no;  BMODE=8260;; \
1088         TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1089         TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=8260;; \
1090         TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes; BMODE=60x;;  \
1091         TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1092         esac; \
1093         >include/config.h ; \
1094         if [ "$${CTYPE}" != "MPC8260" ] ; then \
1095                 echo "#define CONFIG_$${CTYPE}" >>include/config.h ; \
1096         fi; \
1097         echo "#define CONFIG_$${CFREQ}MHz"      >>include/config.h ; \
1098         echo "... with $${CFREQ}MHz system clock" ; \
1099         if [ "$${CACHE}" == "yes" ] ; then \
1100                 echo "#define CONFIG_L2_CACHE"  >>include/config.h ; \
1101                 echo "... with L2 Cache support" ; \
1102         else \
1103                 echo "#undef CONFIG_L2_CACHE"   >>include/config.h ; \
1104                 echo "... without L2 Cache support" ; \
1105         fi; \
1106         if [ "$${BMODE}" == "60x" ] ; then \
1107                 echo "#define CONFIG_BUSMODE_60x" >>include/config.h ; \
1108                 echo "... with 60x Bus Mode" ; \
1109         else \
1110                 echo "#undef CONFIG_BUSMODE_60x"  >>include/config.h ; \
1111                 echo "... without 60x Bus Mode" ; \
1112         fi
1113         @./mkconfig -a TQM8260 ppc mpc8260 tqm8260
1114
1115 ZPC1900_config: unconfig
1116         @./mkconfig $(@:_config=) ppc mpc8260 zpc1900
1117
1118 #========================================================================
1119 # M68K
1120 #========================================================================
1121 #########################################################################
1122 ## Coldfire
1123 #########################################################################
1124
1125 M5272C3_config :                unconfig
1126         @./mkconfig $(@:_config=) m68k mcf52x2 m5272c3
1127
1128 M5282EVB_config :               unconfig
1129         @./mkconfig $(@:_config=) m68k mcf52x2 m5282evb
1130
1131 TASREG_config :         unconfig
1132         @./mkconfig $(@:_config=) m68k mcf52x2 tasreg esd
1133
1134 #########################################################################
1135 ## MPC85xx Systems
1136 #########################################################################
1137
1138 MPC8540ADS_config:      unconfig
1139         @./mkconfig $(@:_config=) ppc mpc85xx mpc8540ads
1140
1141 MPC8560ADS_config:      unconfig
1142         @./mkconfig $(@:_config=) ppc mpc85xx mpc8560ads
1143
1144 MPC8541CDS_config:      unconfig
1145         @./mkconfig $(@:_config=) ppc mpc85xx mpc8541cds cds
1146
1147 MPC8555CDS_config:      unconfig
1148         @./mkconfig $(@:_config=) ppc mpc85xx mpc8555cds cds
1149
1150 sbc8540_config \
1151 sbc8540_33_config \
1152 sbc8540_66_config:      unconfig
1153         @if [ "$(findstring _66_,$@)" ] ; then \
1154                 echo "#define CONFIG_PCI_66"    >>include/config.h ; \
1155                 echo "... 66 MHz PCI" ; \
1156         else \
1157                 >include/config.h ; \
1158                 echo "... 33 MHz PCI" ; \
1159         fi
1160         @./mkconfig -a SBC8540 ppc mpc85xx sbc8560
1161
1162 sbc8560_config \
1163 sbc8560_33_config \
1164 sbc8560_66_config:      unconfig
1165         @if [ "$(findstring _66_,$@)" ] ; then \
1166                 echo "#define CONFIG_PCI_66"    >>include/config.h ; \
1167                 echo "... 66 MHz PCI" ; \
1168         else \
1169                 >include/config.h ; \
1170                 echo "... 33 MHz PCI" ; \
1171         fi
1172         @./mkconfig -a sbc8560 ppc mpc85xx sbc8560
1173
1174 stxgp3_config:          unconfig
1175         @./mkconfig $(@:_config=) ppc mpc85xx stxgp3
1176
1177 TQM8540_config:      unconfig
1178         @./mkconfig $(@:_config=) ppc mpc85xx tqm8540
1179
1180 #########################################################################
1181 ## 74xx/7xx Systems
1182 #########################################################################
1183
1184 AmigaOneG3SE_config:    unconfig
1185         @./mkconfig $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI
1186
1187 BAB7xx_config: unconfig
1188         @./mkconfig $(@:_config=) ppc 74xx_7xx bab7xx eltec
1189
1190 CPCI750_config:        unconfig
1191         @./mkconfig CPCI750 ppc 74xx_7xx cpci750 esd
1192
1193 DB64360_config:  unconfig
1194         @./mkconfig DB64360 ppc 74xx_7xx db64360 Marvell
1195
1196 DB64460_config:  unconfig
1197         @./mkconfig DB64460 ppc 74xx_7xx db64460 Marvell
1198
1199 ELPPC_config: unconfig
1200         @./mkconfig $(@:_config=) ppc 74xx_7xx elppc eltec
1201
1202 EVB64260_config \
1203 EVB64260_750CX_config:  unconfig
1204         @./mkconfig EVB64260 ppc 74xx_7xx evb64260
1205
1206 P3G4_config: unconfig
1207         @./mkconfig $(@:_config=) ppc 74xx_7xx evb64260
1208
1209 PCIPPC2_config \
1210 PCIPPC6_config: unconfig
1211         @./mkconfig $(@:_config=) ppc 74xx_7xx pcippc2
1212
1213 ZUMA_config:    unconfig
1214         @./mkconfig $(@:_config=) ppc 74xx_7xx evb64260
1215
1216 #========================================================================
1217 # ARM
1218 #========================================================================
1219 #########################################################################
1220 ## StrongARM Systems
1221 #########################################################################
1222
1223 assabet_config  :       unconfig
1224         @./mkconfig $(@:_config=) arm sa1100 assabet
1225
1226 dnp1110_config  :       unconfig
1227         @./mkconfig $(@:_config=) arm sa1100 dnp1110
1228
1229 gcplus_config   :       unconfig
1230         @./mkconfig $(@:_config=) arm sa1100 gcplus
1231
1232 lart_config     :       unconfig
1233         @./mkconfig $(@:_config=) arm sa1100 lart
1234
1235 shannon_config  :       unconfig
1236         @./mkconfig $(@:_config=) arm sa1100 shannon
1237
1238 #########################################################################
1239 ## ARM92xT Systems
1240 #########################################################################
1241
1242 xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1))))
1243
1244 xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
1245
1246 xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1)))
1247
1248 integratorap_config :   unconfig
1249         @./mkconfig $(@:_config=) arm arm926ejs integratorap
1250
1251 integratorcp_config :   unconfig
1252         @./mkconfig $(@:_config=) arm arm926ejs integratorcp
1253
1254 lpd7a400_config \
1255 lpd7a404_config:        unconfig
1256         @./mkconfig $(@:_config=) arm lh7a40x lpd7a40x
1257
1258 mx1ads_config   :       unconfig
1259         @./mkconfig $(@:_config=) arm arm920t mx1ads NULL imx
1260
1261 mx1fs2_config   :       unconfig
1262         @./mkconfig $(@:_config=) arm arm920t mx1fs2 NULL imx
1263
1264 omap1510inn_config :    unconfig
1265         @./mkconfig $(@:_config=) arm arm925t omap1510inn
1266
1267 omap5912osk_config :    unconfig
1268         @./mkconfig $(@:_config=) arm arm926ejs omap5912osk
1269
1270 omap1610inn_config \
1271 omap1610inn_cs0boot_config \
1272 omap1610inn_cs3boot_config \
1273 omap1610inn_cs_autoboot_config \
1274 omap1610h2_config \
1275 omap1610h2_cs0boot_config \
1276 omap1610h2_cs3boot_config \
1277 omap1610h2_cs_autoboot_config:  unconfig
1278         @if [ "$(findstring _cs0boot_, $@)" ] ; then \
1279                 echo "#define CONFIG_CS0_BOOT" >> ./include/config.h ; \
1280                 echo "... configured for CS0 boot"; \
1281         elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \
1282                 echo "#define CONFIG_CS_AUTOBOOT" >> ./include/config.h ; \
1283                 echo "... configured for CS_AUTO boot"; \
1284         else \
1285                 echo "#define CONFIG_CS3_BOOT" >> ./include/config.h ; \
1286                 echo "... configured for CS3 boot"; \
1287         fi;
1288         @./mkconfig -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn
1289
1290 omap730p2_config \
1291 omap730p2_cs0boot_config \
1292 omap730p2_cs3boot_config :      unconfig
1293         @if [ "$(findstring _cs0boot_, $@)" ] ; then \
1294                 echo "#define CONFIG_CS0_BOOT" >> ./include/config.h ; \
1295                 echo "... configured for CS0 boot"; \
1296         else \
1297                 echo "#define CONFIG_CS3_BOOT" >> ./include/config.h ; \
1298                 echo "... configured for CS3 boot"; \
1299         fi;
1300         @./mkconfig -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2
1301
1302 scb9328_config  :       unconfig
1303         @./mkconfig $(@:_config=) arm arm920t scb9328 NULL imx
1304
1305 smdk2400_config :       unconfig
1306         @./mkconfig $(@:_config=) arm arm920t smdk2400 NULL s3c24x0
1307
1308 smdk2410_config :       unconfig
1309         @./mkconfig $(@:_config=) arm arm920t smdk2410 NULL s3c24x0
1310
1311 SX1_config :            unconfig
1312         @./mkconfig $(@:_config=) arm arm925t sx1
1313
1314 # TRAB default configuration:   8 MB Flash, 32 MB RAM
1315 trab_config \
1316 trab_bigram_config \
1317 trab_bigflash_config \
1318 trab_old_config:        unconfig
1319         @ >include/config.h
1320         @[ -z "$(findstring _bigram,$@)" ] || \
1321                 { echo "#define CONFIG_FLASH_8MB"  >>include/config.h ; \
1322                   echo "#define CONFIG_RAM_32MB"   >>include/config.h ; \
1323                   echo "... with 8 MB Flash, 32 MB RAM" ; \
1324                 }
1325         @[ -z "$(findstring _bigflash,$@)" ] || \
1326                 { echo "#define CONFIG_FLASH_16MB" >>include/config.h ; \
1327                   echo "#define CONFIG_RAM_16MB"   >>include/config.h ; \
1328                   echo "... with 16 MB Flash, 16 MB RAM" ; \
1329                   echo "TEXT_BASE = 0x0CF40000" >board/trab/config.tmp ; \
1330                 }
1331         @[ -z "$(findstring _old,$@)" ] || \
1332                 { echo "#define CONFIG_FLASH_8MB"  >>include/config.h ; \
1333                   echo "#define CONFIG_RAM_16MB"   >>include/config.h ; \
1334                   echo "... with 8 MB Flash, 16 MB RAM" ; \
1335                   echo "TEXT_BASE = 0x0CF40000" >board/trab/config.tmp ; \
1336                 }
1337         @./mkconfig -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0
1338
1339 VCMA9_config    :       unconfig
1340         @./mkconfig $(@:_config=) arm arm920t vcma9 mpl s3c24x0
1341
1342 versatile_config :      unconfig
1343         @./mkconfig $(@:_config=) arm arm926ejs versatile
1344
1345 #########################################################################
1346 ## S3C44B0 Systems
1347 #########################################################################
1348
1349 B2_config       :       unconfig
1350         @./mkconfig $(@:_config=) arm s3c44b0 B2 dave
1351
1352 #########################################################################
1353 ## ARM720T Systems
1354 #########################################################################
1355
1356 ep7312_config   :       unconfig
1357         @./mkconfig $(@:_config=) arm arm720t ep7312
1358
1359 impa7_config    :       unconfig
1360         @./mkconfig $(@:_config=) arm arm720t impa7
1361
1362 modnet50_config :       unconfig
1363         @./mkconfig $(@:_config=) arm arm720t modnet50
1364
1365 evb4510_config :        unconfig
1366         @./mkconfig $(@:_config=) arm arm720t evb4510
1367
1368 #########################################################################
1369 ## AT91RM9200 Systems
1370 #########################################################################
1371
1372 at91rm9200dk_config     :       unconfig
1373         @./mkconfig $(@:_config=) arm at91rm9200 at91rm9200dk
1374
1375 cmc_pu2_config  :       unconfig
1376         @./mkconfig $(@:_config=) arm at91rm9200 cmc_pu2
1377
1378 #########################################################################
1379 ## XScale Systems
1380 #########################################################################
1381
1382 cerf250_config :        unconfig
1383         @./mkconfig $(@:_config=) arm pxa cerf250
1384
1385 cradle_config   :       unconfig
1386         @./mkconfig $(@:_config=) arm pxa cradle
1387
1388 csb226_config   :       unconfig
1389         @./mkconfig $(@:_config=) arm pxa csb226
1390
1391 innokom_config  :       unconfig
1392         @./mkconfig $(@:_config=) arm pxa innokom
1393
1394 ixdp425_config  :       unconfig
1395         @./mkconfig $(@:_config=) arm ixp ixdp425
1396
1397 lubbock_config  :       unconfig
1398         @./mkconfig $(@:_config=) arm pxa lubbock
1399
1400 logodl_config   :       unconfig
1401         @./mkconfig $(@:_config=) arm pxa logodl
1402
1403 wepep250_config :       unconfig
1404         @./mkconfig $(@:_config=) arm pxa wepep250
1405
1406 xaeniax_config  :       unconfig
1407         @./mkconfig $(@:_config=) arm pxa xaeniax
1408
1409 xm250_config    :       unconfig
1410         @./mkconfig $(@:_config=) arm pxa xm250
1411
1412 xsengine_config :       unconfig
1413         @./mkconfig $(@:_config=) arm pxa xsengine
1414
1415 #########################################################################
1416 ## ARM1136 Systems
1417 #########################################################################
1418 omap2420h4_config :    unconfig
1419         @./mkconfig $(@:_config=) arm arm1136 omap2420h4
1420
1421 #========================================================================
1422 # i386
1423 #========================================================================
1424 #########################################################################
1425 ## AMD SC520 CDP
1426 #########################################################################
1427 sc520_cdp_config        :       unconfig
1428         @./mkconfig $(@:_config=) i386 i386 sc520_cdp
1429
1430 sc520_spunk_config      :       unconfig
1431         @./mkconfig $(@:_config=) i386 i386 sc520_spunk
1432
1433 sc520_spunk_rel_config  :       unconfig
1434         @./mkconfig $(@:_config=) i386 i386 sc520_spunk
1435
1436 #========================================================================
1437 # MIPS
1438 #========================================================================
1439 #########################################################################
1440 ## MIPS32 4Kc
1441 #########################################################################
1442
1443 xtract_incaip = $(subst _100MHz,,$(subst _133MHz,,$(subst _150MHz,,$(subst _config,,$1))))
1444
1445 incaip_100MHz_config    \
1446 incaip_133MHz_config    \
1447 incaip_150MHz_config    \
1448 incaip_config: unconfig
1449         @ >include/config.h
1450         @[ -z "$(findstring _100MHz,$@)" ] || \
1451                 { echo "#define CPU_CLOCK_RATE 100000000" >>include/config.h ; \
1452                   echo "... with 100MHz system clock" ; \
1453                 }
1454         @[ -z "$(findstring _133MHz,$@)" ] || \
1455                 { echo "#define CPU_CLOCK_RATE 133000000" >>include/config.h ; \
1456                   echo "... with 133MHz system clock" ; \
1457                 }
1458         @[ -z "$(findstring _150MHz,$@)" ] || \
1459                 { echo "#define CPU_CLOCK_RATE 150000000" >>include/config.h ; \
1460                   echo "... with 150MHz system clock" ; \
1461                 }
1462         @./mkconfig -a $(call xtract_incaip,$@) mips mips incaip
1463
1464 tb0229_config: unconfig
1465         @./mkconfig $(@:_config=) mips mips tb0229
1466
1467 #########################################################################
1468 ## MIPS32 AU1X00
1469 #########################################################################
1470 dbau1000_config         :       unconfig
1471         @ >include/config.h
1472         @echo "#define CONFIG_DBAU1000 1" >>include/config.h
1473         @./mkconfig -a dbau1x00 mips mips dbau1x00
1474
1475 dbau1100_config         :       unconfig
1476         @ >include/config.h
1477         @echo "#define CONFIG_DBAU1100 1" >>include/config.h
1478         @./mkconfig -a dbau1x00 mips mips dbau1x00
1479
1480 dbau1500_config         :       unconfig
1481         @ >include/config.h
1482         @echo "#define CONFIG_DBAU1500 1" >>include/config.h
1483         @./mkconfig -a dbau1x00 mips mips dbau1x00
1484
1485 dbau1550_config         :       unconfig
1486         @ >include/config.h
1487         @echo "#define CONFIG_DBAU1550 1" >>include/config.h
1488         @./mkconfig -a dbau1x00 mips mips dbau1x00
1489
1490 dbau1550_el_config      :       unconfig
1491         @ >include/config.h
1492         @echo "#define CONFIG_DBAU1550 1" >>include/config.h
1493         @./mkconfig -a dbau1x00 mips mips dbau1x00 "" little
1494
1495 #########################################################################
1496 ## MIPS64 5Kc
1497 #########################################################################
1498
1499 purple_config :         unconfig
1500         @./mkconfig $(@:_config=) mips mips purple
1501
1502 #========================================================================
1503 # Nios
1504 #========================================================================
1505 #########################################################################
1506 ## Nios32
1507 #########################################################################
1508
1509 DK1C20_safe_32_config           \
1510 DK1C20_standard_32_config       \
1511 DK1C20_config:  unconfig
1512         @ >include/config.h
1513         @[ -z "$(findstring _safe_32,$@)" ] || \
1514                 { echo "#define CONFIG_NIOS_SAFE_32 1" >>include/config.h ; \
1515                   echo "... NIOS 'safe_32' configuration" ; \
1516                 }
1517         @[ -z "$(findstring _standard_32,$@)" ] || \
1518                 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \
1519                   echo "... NIOS 'standard_32' configuration" ; \
1520                 }
1521         @[ -z "$(findstring DK1C20_config,$@)" ] || \
1522                 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \
1523                   echo "... NIOS 'standard_32' configuration (DEFAULT)" ; \
1524                 }
1525         @./mkconfig -a DK1C20 nios nios dk1c20 altera
1526
1527 DK1S10_safe_32_config           \
1528 DK1S10_standard_32_config       \
1529 DK1S10_mtx_ldk_20_config        \
1530 DK1S10_config:  unconfig
1531         @ >include/config.h
1532         @[ -z "$(findstring _safe_32,$@)" ] || \
1533                 { echo "#define CONFIG_NIOS_SAFE_32 1" >>include/config.h ; \
1534                   echo "... NIOS 'safe_32' configuration" ; \
1535                 }
1536         @[ -z "$(findstring _standard_32,$@)" ] || \
1537                 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \
1538                   echo "... NIOS 'standard_32' configuration" ; \
1539                 }
1540         @[ -z "$(findstring _mtx_ldk_20,$@)" ] || \
1541                 { echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>include/config.h ; \
1542                   echo "... NIOS 'mtx_ldk_20' configuration" ; \
1543                 }
1544         @[ -z "$(findstring DK1S10_config,$@)" ] || \
1545                 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \
1546                   echo "... NIOS 'standard_32' configuration (DEFAULT)" ; \
1547                 }
1548         @./mkconfig -a DK1S10 nios nios dk1s10 altera
1549
1550 ADNPESC1_DNPEVA2_base_32_config \
1551 ADNPESC1_base_32_config         \
1552 ADNPESC1_config: unconfig
1553         @ >include/config.h
1554         @[ -z "$(findstring _DNPEVA2,$@)" ] || \
1555                 { echo "#define CONFIG_DNPEVA2 1" >>include/config.h ; \
1556                   echo "... DNP/EVA2 configuration" ; \
1557                 }
1558         @[ -z "$(findstring _base_32,$@)" ] || \
1559                 { echo "#define CONFIG_NIOS_BASE_32 1" >>include/config.h ; \
1560                   echo "... NIOS 'base_32' configuration" ; \
1561                 }
1562         @[ -z "$(findstring ADNPESC1_config,$@)" ] || \
1563                 { echo "#define CONFIG_NIOS_BASE_32 1" >>include/config.h ; \
1564                   echo "... NIOS 'base_32' configuration (DEFAULT)" ; \
1565                 }
1566         @./mkconfig -a ADNPESC1 nios nios adnpesc1 ssv
1567
1568 #########################################################################
1569 ## Nios-II
1570 #########################################################################
1571
1572 PK1C20_config : unconfig
1573         @./mkconfig  PK1C20 nios2 nios2 pk1c20 psyent
1574
1575 PCI5441_config : unconfig
1576         @./mkconfig  PCI5441 nios2 nios2 pci5441 psyent
1577
1578 #========================================================================
1579 # MicroBlaze
1580 #========================================================================
1581 #########################################################################
1582 ## Microblaze
1583 #########################################################################
1584 suzaku_config:  unconfig
1585         @ >include/config.h
1586         @echo "#define CONFIG_SUZAKU 1" >> include/config.h
1587         @./mkconfig -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno
1588
1589 #########################################################################
1590 #########################################################################
1591
1592 clean:
1593         find . -type f \
1594                 \( -name 'core' -o -name '*.bak' -o -name '*~' \
1595                 -o -name '*.o'  -o -name '*.a'  \) -print \
1596                 | xargs rm -f
1597         rm -f examples/hello_world examples/timer \
1598               examples/eepro100_eeprom examples/sched \
1599               examples/mem_to_mem_idma2intr examples/82559_eeprom
1600         rm -f tools/img2srec tools/mkimage tools/envcrc tools/gen_eth_addr
1601         rm -f tools/mpc86x_clk tools/ncb
1602         rm -f tools/easylogo/easylogo tools/bmp_logo
1603         rm -f tools/gdb/astest tools/gdb/gdbcont tools/gdb/gdbsend
1604         rm -f tools/env/fw_printenv tools/env/fw_setenv
1605         rm -f board/cray/L1/bootscript.c board/cray/L1/bootscript.image
1606         rm -f board/trab/trab_fkt
1607
1608 clobber:        clean
1609         find . -type f \( -name .depend \
1610                 -o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \
1611                 -print0 \
1612                 | xargs -0 rm -f
1613         rm -f $(OBJS) *.bak tags TAGS
1614         rm -fr *.*~
1615         rm -f u-boot u-boot.map u-boot.hex $(ALL)
1616         rm -f tools/crc32.c tools/environment.c tools/env/crc32.c
1617         rm -f tools/inca-swap-bytes cpu/mpc824x/bedbug_603e.c
1618         rm -f include/asm/proc include/asm/arch include/asm
1619
1620 mrproper \
1621 distclean:      clobber unconfig
1622
1623 backup:
1624         F=`basename $(TOPDIR)` ; cd .. ; \
1625         gtar --force-local -zcvf `date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
1626
1627 #########################################################################