2 # (C) Copyright 2000-2013
3 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5 # SPDX-License-Identifier: GPL-2.0+
15 # To see a list of typical targets execute "make help"
16 # More info can be located in ./README
17 # Comments in this file are targeted only to the developer, do not
18 # expect to learn how to build the kernel reading this file.
21 # o use make's built-in rules and variables
22 # (this increases performance and avoids hard-to-debug behaviour);
23 # o print "Entering directory ...";
24 MAKEFLAGS
+= -rR
--no-print-directory
26 # Avoid funny character set dependencies
30 export LC_COLLATE LC_NUMERIC
32 # We are using a recursive build, so we need to do a little thinking
33 # to get the ordering right.
35 # Most importantly: sub-Makefiles should only ever modify files in
36 # their own directory. If in some directory we have a dependency on
37 # a file in another dir (which doesn't happen often, but it's often
38 # unavoidable when linking the built-in.o targets which finally
39 # turn into vmlinux), we will call a sub make in that other dir, and
40 # after that we are sure that everything which is in that other dir
43 # The only cases where we need to modify files which have global
44 # effects are thus separated out and done before the recursive
45 # descending is started. They are now explicitly listed as the
48 # To put more focus on warnings, be less verbose as default
49 # Use 'make V=1' to see the full commands
51 ifeq ("$(origin V)", "command line")
58 # Call a source code checker (by default, "sparse") as part of the
61 # Use 'make C=1' to enable checking of only re-compiled files.
62 # Use 'make C=2' to enable checking of *all* source files, regardless
63 # of whether they are re-compiled or not.
65 # See the file "Documentation/sparse.txt" for more details, including
66 # where to get the "sparse" utility.
68 ifeq ("$(origin C)", "command line")
69 KBUILD_CHECKSRC
= $(C
)
71 ifndef KBUILD_CHECKSRC
75 # Use make M=dir to specify directory of external module to build
76 # Old syntax make ... SUBDIRS=$PWD is still supported
77 # Setting the environment variable KBUILD_EXTMOD take precedence
79 KBUILD_EXTMOD ?
= $(SUBDIRS
)
82 ifeq ("$(origin M)", "command line")
86 # kbuild supports saving output files in a separate directory.
87 # To locate output files in a separate directory two syntaxes are supported.
88 # In both cases the working directory must be the root of the kernel src.
90 # Use "make O=dir/to/store/output/files/"
92 # 2) Set KBUILD_OUTPUT
93 # Set the environment variable KBUILD_OUTPUT to point to the directory
94 # where the output files shall be placed.
95 # export KBUILD_OUTPUT=dir/to/store/output/files/
98 # The O= assignment takes precedence over the KBUILD_OUTPUT environment
102 # KBUILD_SRC is set on invocation of make in OBJ directory
103 # KBUILD_SRC is not intended to be used by the regular user (for now)
104 ifeq ($(KBUILD_SRC
),)
106 # OK, Make called in directory where kernel src resides
107 # Do we want to locate output files in a separate directory?
108 ifeq ("$(origin O)", "command line")
109 KBUILD_OUTPUT
:= $(O
)
112 ifeq ("$(origin W)", "command line")
113 export KBUILD_ENABLE_EXTRA_GCC_CHECKS
:= $(W
)
116 # That's our default target when none is given on the command line
120 # Cancel implicit rules on top Makefile
121 $(CURDIR
)/Makefile Makefile
: ;
123 ifneq ($(KBUILD_OUTPUT
),)
124 # Invoke a second make in the output directory, passing relevant variables
125 # check that the output directory actually exists
126 saved-output
:= $(KBUILD_OUTPUT
)
127 KBUILD_OUTPUT
:= $(shell mkdir
-p
$(KBUILD_OUTPUT
) && cd
$(KBUILD_OUTPUT
) \
129 $(if
$(KBUILD_OUTPUT
),, \
130 $(error failed to create output directory
"$(saved-output)"))
132 PHONY
+= $(MAKECMDGOALS
) sub-make
134 $(filter-out _all sub-make
$(CURDIR
)/Makefile
, $(MAKECMDGOALS
)) _all
: sub-make
138 $(if
$(KBUILD_VERBOSE
:1=),@
)$(MAKE
) -C
$(KBUILD_OUTPUT
) \
139 KBUILD_SRC
=$(CURDIR
) \
140 KBUILD_EXTMOD
="$(KBUILD_EXTMOD)" -f
$(CURDIR
)/Makefile \
141 $(filter-out _all sub-make
,$(MAKECMDGOALS
))
143 # Leave processing to above invocation of make
145 endif # ifneq ($(KBUILD_OUTPUT),)
146 endif # ifeq ($(KBUILD_SRC),)
148 # We process the rest of the Makefile if this is the final invocation of make
149 ifeq ($(skip-makefile
),)
151 # If building an external module we do not care about the all: rule
152 # but instead _all depend on modules
154 ifeq ($(KBUILD_EXTMOD
),)
160 srctree
:= $(if
$(KBUILD_SRC
),$(KBUILD_SRC
),$(CURDIR
))
165 VPATH
:= $(srctree
)$(if
$(KBUILD_EXTMOD
),:$(KBUILD_EXTMOD
))
167 export srctree objtree VPATH
169 MKCONFIG
:= $(srctree
)/mkconfig
172 # Make sure CDPATH settings don't interfere
175 #########################################################################
177 HOSTARCH
:= $(shell uname
-m | \
179 -e s
/sun4u
/sparc64
/ \
182 -e s
/ppc64
/powerpc
/ \
184 -e s
/macppc
/powerpc
/\
187 HOSTOS
:= $(shell uname
-s | tr
'[:upper:]' '[:lower:]' | \
188 sed
-e
's/\(cygwin\).*/cygwin/')
190 export HOSTARCH HOSTOS
192 # Deal with colliding definitions from tcsh etc.
195 #########################################################################
197 # set default to nothing for native builds
198 ifeq ($(HOSTARCH
),$(ARCH
))
202 # SHELL used by kbuild
203 CONFIG_SHELL
:= $(shell if
[ -x
"$$BASH" ]; then echo
$$BASH; \
204 else if
[ -x
/bin
/bash
]; then echo
/bin
/bash
; \
205 else echo sh
; fi
; fi
)
209 HOSTCFLAGS
= -Wall
-Wstrict-prototypes
-O2
-fomit-frame-pointer
212 ifeq ($(shell $(HOSTCC
) -v
2>&1 | grep
-c
"clang version"), 1)
213 HOSTCFLAGS
+= -Wno-unused-value
-Wno-unused-parameter \
214 -Wno-missing-field-initializers
-fno-delete-null-pointer-checks
217 ifeq ($(HOSTOS
),cygwin
)
221 # Mac OS X / Darwin's C preprocessor is Apple specific. It
222 # generates numerous errors and warnings. We want to bypass it
223 # and use GNU C's cpp. To do this we pass the -traditional-cpp
224 # option to the compiler. Note that the -traditional-cpp flag
225 # DOES NOT have the same semantics as GNU C's flag, all it does
226 # is invoke the GNU preprocessor in stock ANSI/ISO C fashion.
228 # Apple's linker is similar, thanks to the new 2 stage linking
229 # multiple symbol definitions are treated as errors, hence the
230 # -multiply_defined suppress option to turn off this error.
232 ifeq ($(HOSTOS
),darwin
)
233 # get major and minor product version (e.g. '10' and '6' for Snow Leopard)
234 DARWIN_MAJOR_VERSION
= $(shell sw_vers
-productVersion | cut
-f
1 -d
'.')
235 DARWIN_MINOR_VERSION
= $(shell sw_vers
-productVersion | cut
-f
2 -d
'.')
237 os_x_before
= $(shell if
[ $(DARWIN_MAJOR_VERSION
) -le
$(1) -a \
238 $(DARWIN_MINOR_VERSION
) -le
$(2) ] ; then echo
"$(3)"; else echo
"$(4)"; fi
;)
240 # Snow Leopards build environment has no longer restrictions as described above
241 HOSTCC
= $(call os_x_before
, 10, 5, "cc", "gcc")
242 HOSTCFLAGS
+= $(call os_x_before
, 10, 4, "-traditional-cpp")
243 HOSTLDFLAGS
+= $(call os_x_before
, 10, 5, "-multiply_defined suppress")
246 # Decide whether to build built-in, modular, or both.
247 # Normally, just do built-in.
252 # If we have only "make modules", don't compile built-in objects.
253 # When we're building modules with modversions, we need to consider
254 # the built-in objects during the descend as well, in order to
255 # make sure the checksums are up to date before we record them.
257 ifeq ($(MAKECMDGOALS
),modules
)
258 KBUILD_BUILTIN
:= $(if
$(CONFIG_MODVERSIONS
),1)
261 # If we have "make <whatever> modules", compile modules
262 # in addition to whatever we do anyway.
263 # Just "make" or "make all" shall build modules as well
265 # U-Boot does not need modules
266 #ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
267 # KBUILD_MODULES := 1
270 #ifeq ($(MAKECMDGOALS),)
271 # KBUILD_MODULES := 1
274 export KBUILD_MODULES KBUILD_BUILTIN
275 export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
278 # ---------------------------------------------------------------------------
280 # Normally, we echo the whole command before executing it. By making
281 # that echo $($(quiet)$(cmd)), we now have the possibility to set
282 # $(quiet) to choose other forms of output instead, e.g.
284 # quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
285 # cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
287 # If $(quiet) is empty, the whole command will be printed.
288 # If it is set to "quiet_", only the short version will be printed.
289 # If it is set to "silent_", nothing will be printed at all, since
290 # the variable $(silent_cmd_cc_o_c) doesn't exist.
292 # A simple variant is to prefix commands with $(Q) - that's useful
293 # for commands that shall be hidden in non-verbose mode.
297 # If KBUILD_VERBOSE equals 0 then the above command will be hidden.
298 # If KBUILD_VERBOSE equals 1 then the above command is displayed.
300 ifeq ($(KBUILD_VERBOSE
),1)
308 # If the user is running make -s (silent mode), suppress echoing of
311 ifneq ($(filter 4.
%,$(MAKE_VERSION
)),) # make-4
312 ifneq ($(filter %s
,$(firstword x
$(MAKEFLAGS
))),)
316 ifneq ($(filter s
% -s
%,$(MAKEFLAGS
)),)
321 export quiet Q KBUILD_VERBOSE
324 ifeq ($(shell $(CC
) -v
2>&1 | grep
-c
"clang version"), 1)
332 # Look for make include files relative to root of kernel src
333 MAKEFLAGS
+= --include-dir
=$(srctree
)
335 # We need some generic definitions (do not try to remake the file).
336 $(srctree
)/scripts
/Kbuild.
include: ;
337 include $(srctree
)/scripts
/Kbuild.
include
339 # Make variables (CC, etc...)
341 AS
= $(CROSS_COMPILE
)as
343 ifneq ($(shell $(CROSS_COMPILE
)ld.bfd
-v
2> /dev
/null
),)
344 LD
= $(CROSS_COMPILE
)ld.bfd
346 LD
= $(CROSS_COMPILE
)ld
348 CC
= $(CROSS_COMPILE
)gcc
350 AR
= $(CROSS_COMPILE
)ar
351 NM
= $(CROSS_COMPILE
)nm
352 LDR
= $(CROSS_COMPILE
)ldr
353 STRIP
= $(CROSS_COMPILE
)strip
354 OBJCOPY
= $(CROSS_COMPILE
)objcopy
355 OBJDUMP
= $(CROSS_COMPILE
)objdump
357 RANLIB
= $(CROSS_COMPILE
)RANLIB
361 CHECKFLAGS
:= -D__linux__
-Dlinux
-D__STDC__
-Dunix
-D__unix__ \
362 -Wbitwise
-Wno-return-void
-D__CHECK_ENDIAN__
$(CF
)
364 KBUILD_CPPFLAGS
:= -D__KERNEL__
366 KBUILD_CFLAGS
:= -Wall
-Wstrict-prototypes \
367 -Wno-format-security \
368 -fno-builtin
-ffreestanding
369 KBUILD_AFLAGS
:= -D__ASSEMBLY__
371 # Read UBOOTRELEASE from include/config/uboot.release (if it exists)
372 UBOOTRELEASE
= $(shell cat
include/config
/uboot.release
2> /dev
/null
)
373 UBOOTVERSION
= $(VERSION
)$(if
$(PATCHLEVEL
),.
$(PATCHLEVEL
)$(if
$(SUBLEVEL
),.
$(SUBLEVEL
)))$(EXTRAVERSION
)
375 export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION
376 export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR
377 export CONFIG_SHELL HOSTCC HOSTCFLAGS HOSTLDFLAGS CROSS_COMPILE AS LD CC
378 export CPP AR NM LDR STRIP OBJCOPY OBJDUMP
380 export DTC CHECK CHECKFLAGS
382 export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS LDFLAGS
383 export KBUILD_CFLAGS KBUILD_AFLAGS
385 # When compiling out-of-tree modules, put MODVERDIR in the module
386 # tree rather than in the kernel tree. The kernel tree might
388 export MODVERDIR
:= $(if
$(KBUILD_EXTMOD
),$(firstword $(KBUILD_EXTMOD
))/).tmp_versions
390 # Files to ignore in find ... statements
392 export RCS_FIND_IGNORE
:= \
( -name SCCS
-o
-name BitKeeper
-o
-name .svn
-o \
393 -name CVS
-o
-name .
pc -o
-name .hg
-o
-name .git \
) \
395 export RCS_TAR_IGNORE
:= --exclude SCCS
--exclude BitKeeper
--exclude .svn \
396 --exclude CVS
--exclude .
pc --exclude .hg
--exclude .git
398 # ===========================================================================
399 # Rules shared between *config targets and build targets
401 # Basic helpers built in scripts/
402 PHONY
+= scripts_basic
404 $(Q
)$(MAKE
) $(build
)=scripts
/basic
405 $(Q
)rm -f .tmp_quiet_recordmcount
407 # To avoid any implicit rule to kick in, define an empty command.
408 scripts
/basic
/%: scripts_basic
;
410 PHONY
+= outputmakefile
411 # outputmakefile generates a Makefile in the output directory, if using a
412 # separate output directory. This allows convenient use of make in the
415 ifneq ($(KBUILD_SRC
),)
416 $(Q
)ln
-fsn
$(srctree
) source
417 $(Q
)$(CONFIG_SHELL
) $(srctree
)/scripts
/mkmakefile \
418 $(srctree
) $(objtree
) $(VERSION
) $(PATCHLEVEL
)
421 # To make sure we do not include .config for any of the *config targets
422 # catch them early, and hand them over to scripts/kconfig/Makefile
423 # It is allowed to specify more targets when calling make, including
424 # mixing *config targets and build targets.
425 # For example 'make oldconfig all'.
426 # Detect when mixed targets is specified, and make a second invocation
427 # of make so .config is not included in this case either (for *config).
429 version_h
:= include/generated
/version_autogenerated.h
430 timestamp_h
:= include/generated
/timestamp_autogenerated.h
432 no-dot-config-targets
:= clean clobber mrproper
distclean \
433 help
%docs
check% coccicheck \
434 ubootversion backup tools-only
440 ifneq ($(filter $(no-dot-config-targets
), $(MAKECMDGOALS
)),)
441 ifeq ($(filter-out $(no-dot-config-targets
), $(MAKECMDGOALS
)),)
446 ifeq ($(KBUILD_EXTMOD
),)
447 ifneq ($(filter config
%config
,$(MAKECMDGOALS
)),)
449 ifneq ($(filter-out config
%config
,$(MAKECMDGOALS
)),)
455 ifeq ($(mixed-targets
),1)
456 # ===========================================================================
457 # We're called with mixed targets (*config and build targets).
458 # Handle them one by one.
460 PHONY
+= $(MAKECMDGOALS
) build-one-by-one
462 $(MAKECMDGOALS
): build-one-by-one
467 for i in
$(MAKECMDGOALS
); do \
468 $(MAKE
) -f
$(srctree
)/Makefile
$$i; \
472 ifeq ($(config-targets
),1)
473 # ===========================================================================
474 # *config targets only - make sure prerequisites are updated, and descend
475 # in scripts/kconfig to make the *config target
477 # Read arch specific Makefile to set KBUILD_DEFCONFIG as needed.
478 # KBUILD_DEFCONFIG may point out an alternative default configuration
479 # used for 'make defconfig'
481 %_config
:: outputmakefile
482 @
$(MKCONFIG
) -A
$(@
:_config
=)
485 # ===========================================================================
486 # Build targets only - this includes vmlinux, arch specific targets, clean
487 # targets and others. In general all targets except *config targets.
489 # load ARCH, BOARD, and CPU configuration
490 -include include/config.mk
492 ifeq ($(dot-config
),1)
494 -include include/autoconf.mk
495 -include include/autoconf.mk.dep
497 # load other configuration
498 include $(srctree
)/config.mk
500 ifeq ($(wildcard include/config.mk
),)
501 $(error
"System not configured - see README")
504 # If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
505 # that (or fail if absent). Otherwise, search for a linker script in a
509 #LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug
510 ifdef CONFIG_SYS_LDSCRIPT
511 # need to strip off double quotes
512 LDSCRIPT
:= $(srctree
)/$(CONFIG_SYS_LDSCRIPT
:"%"=%)
516 # If there is no specified link script, we look in a number of places for it
518 ifeq ($(CONFIG_NAND_U_BOOT
),y
)
519 LDSCRIPT
:= $(srctree
)/board
/$(BOARDDIR
)/u-boot-nand.lds
520 ifeq ($(wildcard $(LDSCRIPT
)),)
521 LDSCRIPT
:= $(srctree
)/$(CPUDIR
)/u-boot-nand.lds
524 ifeq ($(wildcard $(LDSCRIPT
)),)
525 LDSCRIPT
:= $(srctree
)/board
/$(BOARDDIR
)/u-boot.lds
527 ifeq ($(wildcard $(LDSCRIPT
)),)
528 LDSCRIPT
:= $(srctree
)/$(CPUDIR
)/u-boot.lds
530 ifeq ($(wildcard $(LDSCRIPT
)),)
531 LDSCRIPT
:= $(srctree
)/arch
/$(ARCH
)/cpu
/u-boot.lds
538 endif # $(dot-config)
540 KBUILD_CFLAGS
+= -Os
#-fomit-frame-pointer
543 KBUILD_CFLAGS
+= -DBUILD_TAG
='"$(BUILD_TAG)"'
546 KBUILD_CFLAGS
+= $(call cc-option
,-fno-stack-protector
)
548 ifeq ($(COMPILER
),clang
)
549 KBUILD_CPPFLAGS
+= $(call cc-option
,-Qunused-arguments
,)
550 KBUILD_CPPFLAGS
+= $(call cc-option
,-Wno-unknown-warning-option
,)
551 KBUILD_CFLAGS
+= $(call cc-disable-warning
, unused-variable
)
552 KBUILD_CFLAGS
+= $(call cc-disable-warning
, format-invalid-specifier
)
553 KBUILD_CFLAGS
+= $(call cc-disable-warning
, gnu
)
554 # Quiet clang warning: comparison of unsigned expression < 0 is always false
555 KBUILD_CFLAGS
+= $(call cc-disable-warning
, tautological-compare
)
556 # CLANG uses a _MergedGlobals as optimization, but this breaks modpost, as the
557 # source of a reference will be _MergedGlobals and not on of the whitelisted names.
558 # See modpost pattern 2
559 KBUILD_CFLAGS
+= $(call cc-option
, -mno-global-merge
,)
563 # $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format>
564 # option to the assembler.
567 # Report stack usage if supported
568 ifeq ($(shell $(CONFIG_SHELL
) $(srctree
)/scripts
/gcc-stack-usage.sh
$(CC
)),y
)
569 KBUILD_CFLAGS
+= -fstack-usage
572 KBUILD_CFLAGS
+= $(call cc-option
,-Wno-format-nonliteral
)
574 # turn jbsr into jsr for m68k
576 ifeq ($(findstring 3.4,$(shell $(CC
) --version
)),3.4)
577 KBUILD_AFLAGS
+= -Wa
,-gstabs
,-S
581 # Prohibit date/time macros, which would make the build non-deterministic
582 KBUILD_CFLAGS
+= $(call cc-option
,-Werror
=date-time
)
584 ifneq ($(CONFIG_SYS_TEXT_BASE
),)
585 KBUILD_CPPFLAGS
+= -DCONFIG_SYS_TEXT_BASE
=$(CONFIG_SYS_TEXT_BASE
)
588 export CONFIG_SYS_TEXT_BASE
590 # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
591 KBUILD_CPPFLAGS
+= $(KCPPFLAGS
)
592 KBUILD_AFLAGS
+= $(KAFLAGS
)
593 KBUILD_CFLAGS
+= $(KCFLAGS
)
595 # Use UBOOTINCLUDE when you must reference the include/ directory.
596 # Needed to be compatible with the O= option
599 $(if
$(KBUILD_SRC
), -I
$(srctree
)/include) \
600 -I
$(srctree
)/arch
/$(ARCH
)/include
602 NOSTDINC_FLAGS
+= -nostdinc
-isystem
$(shell $(CC
) -print-file-name
=include)
603 CHECKFLAGS
+= $(NOSTDINC_FLAGS
)
606 cpp_flags
:= $(KBUILD_CPPFLAGS
) $(PLATFORM_CPPFLAGS
) $(UBOOTINCLUDE
) \
608 c_flags
:= $(KBUILD_CFLAGS
) $(cpp_flags
)
610 #########################################################################
611 # U-Boot objects....order is important (i.e. start must be first)
613 head-y
:= $(CPUDIR
)/start.o
614 head-
$(CONFIG_4xx
) += arch
/powerpc
/cpu
/ppc4xx
/resetvec.o
615 head-
$(CONFIG_MPC85xx
) += arch
/powerpc
/cpu
/mpc85xx
/resetvec.o
617 HAVE_VENDOR_COMMON_LIB
= $(if
$(wildcard $(srctree
)/board
/$(VENDOR
)/common
/Makefile
),y
,n
)
620 libs-
$(HAVE_VENDOR_COMMON_LIB
) += board
/$(VENDOR
)/common
/
623 libs-y
+= $(CPUDIR
)/$(SOC
)/
625 libs-
$(CONFIG_OF_EMBED
) += dts
/
626 libs-y
+= arch
/$(ARCH
)/lib
/
631 libs-
$(CONFIG_DM
) += drivers
/core
/
632 libs-y
+= drivers
/dma
/
633 libs-y
+= drivers
/gpio
/
634 libs-y
+= drivers
/i2c
/
635 libs-y
+= drivers
/input
/
636 libs-y
+= drivers
/mmc
/
637 libs-y
+= drivers
/mtd
/
638 libs-
$(CONFIG_CMD_NAND
) += drivers
/mtd
/nand
/
639 libs-y
+= drivers
/mtd
/onenand
/
640 libs-
$(CONFIG_CMD_UBI
) += drivers
/mtd
/ubi
/
641 libs-y
+= drivers
/mtd
/spi
/
642 libs-y
+= drivers
/net
/
643 libs-y
+= drivers
/net
/phy
/
644 libs-y
+= drivers
/pci
/
645 libs-y
+= drivers
/power
/ \
646 drivers
/power
/fuel_gauge
/ \
648 drivers
/power
/pmic
/ \
649 drivers
/power
/battery
/
650 libs-y
+= drivers
/spi
/
651 libs-
$(CONFIG_FMAN_ENET
) += drivers
/net
/fm
/
652 libs-
$(CONFIG_SYS_FSL_DDR
) += drivers
/ddr
/fsl
/
653 libs-y
+= drivers
/serial
/
654 libs-y
+= drivers
/usb
/eth
/
655 libs-y
+= drivers
/usb
/gadget
/
656 libs-y
+= drivers
/usb
/host
/
657 libs-y
+= drivers
/usb
/musb
/
658 libs-y
+= drivers
/usb
/musb-new
/
659 libs-y
+= drivers
/usb
/phy
/
660 libs-y
+= drivers
/usb
/ulpi
/
662 libs-y
+= lib
/libfdt
/
663 libs-
$(CONFIG_API
) += api
/
664 libs-
$(CONFIG_HAS_POST
) += post
/
667 libs-
$(CONFIG_DM_DEMO
) += drivers
/demo
/
669 ifneq (,$(filter $(SOC
), mx25 mx27 mx5 mx6 mx31 mx35 mxs vf610
))
670 libs-y
+= arch
/$(ARCH
)/imx-common
/
673 libs-
$(CONFIG_ARM
) += arch
/arm
/cpu
/
674 libs-
$(CONFIG_PPC
) += arch
/powerpc
/cpu
/
676 libs-y
+= $(if
$(BOARDDIR
),board
/$(BOARDDIR
)/)
678 libs-y
:= $(sort $(libs-y
))
680 u-boot-dirs
:= $(patsubst %/,%,$(filter %/, $(libs-y
))) tools examples
682 u-boot-alldirs
:= $(sort $(u-boot-dirs
) $(patsubst %/,%,$(filter %/, $(libs-
))))
684 libs-y
:= $(patsubst %/, %/built-in.o
, $(libs-y
))
686 u-boot-init
:= $(head-y
)
687 u-boot-main
:= $(libs-y
)
691 ifdef CONFIG_USE_PRIVATE_LIBGCC
692 ifeq ($(CONFIG_USE_PRIVATE_LIBGCC
),y
)
693 PLATFORM_LIBGCC
= arch
/$(ARCH
)/lib
/lib.a
695 PLATFORM_LIBGCC
= -L
$(CONFIG_USE_PRIVATE_LIBGCC
) -lgcc
698 PLATFORM_LIBGCC
:= -L
$(shell dirname
`$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc
700 PLATFORM_LIBS
+= $(PLATFORM_LIBGCC
)
702 export PLATFORM_LIBGCC
704 # Special flags for CPP when processing the linker script.
705 # Pass the version down so we can handle backwards compatibility
708 -include $(srctree
)/include/u-boot
/u-boot.lds.h \
710 $(shell $(LD
) --version | \
711 sed
-ne
's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
713 #########################################################################
714 #########################################################################
716 ifneq ($(CONFIG_BOARD_SIZE_LIMIT
),)
718 @actual
=`wc -c $@ | awk '{print $$1}'`; \
719 limit
=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \
720 if
test $$actual -gt
$$limit; then \
721 echo
"$@ exceeds file size limit:" >&2 ; \
722 echo
" limit: $$limit bytes" >&2 ; \
723 echo
" actual: $$actual bytes" >&2 ; \
724 echo
" excess: $$((actual - limit)) bytes" >&2; \
731 # Statically apply RELA-style relocations (currently arm64 only)
732 ifneq ($(CONFIG_STATIC_RELA
),)
733 # $(1) is u-boot ELF, $(2) is u-boot bin, $(3) is text base
735 start
=$$($(NM
) $(1) | grep __rel_dyn_start | cut
-f
1 -d
' '); \
736 end
=$$($(NM
) $(1) | grep __rel_dyn_end | cut
-f
1 -d
' '); \
737 tools
/relocate-rela
$(2) $(3) $$start $$end
742 # Always append ALL so that arch config.mk's can add custom ones
743 ALL-y
+= u-boot.srec u-boot.bin System.map
745 ALL-
$(CONFIG_NAND_U_BOOT
) += u-boot-nand.bin
746 ALL-
$(CONFIG_ONENAND_U_BOOT
) += u-boot-onenand.bin
747 ifeq ($(CONFIG_SPL_FSL_PBL
),y
)
748 ALL-
$(CONFIG_RAMBOOT_PBL
) += u-boot-with-spl-pbl.bin
750 ALL-
$(CONFIG_RAMBOOT_PBL
) += u-boot.pbl
752 ALL-
$(CONFIG_SPL
) += spl
/u-boot-spl.bin
753 ALL-
$(CONFIG_SPL_FRAMEWORK
) += u-boot.img
754 ALL-
$(CONFIG_TPL
) += tpl
/u-boot-tpl.bin
755 ALL-
$(CONFIG_OF_SEPARATE
) += u-boot.dtb u-boot-dtb.bin
756 ifeq ($(CONFIG_SPL_FRAMEWORK
),y
)
757 ALL-
$(CONFIG_OF_SEPARATE
) += u-boot-dtb.img
759 ALL-
$(CONFIG_OF_HOSTFILE
) += u-boot.dtb
760 ifneq ($(CONFIG_SPL_TARGET
),)
761 ALL-
$(CONFIG_SPL
) += $(CONFIG_SPL_TARGET
:"%"=%)
763 ALL-
$(CONFIG_REMAKE_ELF
) += u-boot.elf
765 # enable combined SPL/u-boot/dtb rules for tegra
766 ifneq ($(CONFIG_TEGRA
),)
767 ifeq ($(CONFIG_SPL
),y
)
768 ifeq ($(CONFIG_OF_SEPARATE
),y
)
769 ALL-y
+= u-boot-dtb-tegra.bin
771 ALL-y
+= u-boot-nodtb-tegra.bin
776 LDFLAGS_u-boot
+= $(LDFLAGS_FINAL
)
777 ifneq ($(CONFIG_SYS_TEXT_BASE
),)
778 LDFLAGS_u-boot
+= -Ttext
$(CONFIG_SYS_TEXT_BASE
)
781 quiet_cmd_objcopy
= OBJCOPY
$@
782 cmd_objcopy
= $(OBJCOPY
) $(OBJCOPYFLAGS
) $(OBJCOPYFLAGS_
$(@F
)) $< $@
784 quiet_cmd_mkimage
= MKIMAGE
$@
785 cmd_mkimage
= $(objtree
)/tools
/mkimage
$(MKIMAGEFLAGS_
$(@F
)) -d
$< $@ \
786 $(if
$(KBUILD_VERBOSE
:1=), >/dev
/null
)
788 quiet_cmd_cat
= CAT
$@
789 cmd_cat
= cat
$(filter-out $(PHONY
), $^
) > $@
791 append
= cat
$(filter-out $< $(PHONY
), $^
) >> $@
793 quiet_cmd_pad_cat
= CAT
$@
794 cmd_pad_cat
= $(cmd_objcopy
) && $(append
) ||
rm -f
$@
799 dtbs dts
/dt.dtb
: checkdtc u-boot
800 $(Q
)$(MAKE
) $(build
)=dts dtbs
802 u-boot-dtb.bin
: u-boot.bin dts
/dt.dtb FORCE
803 $(call if_changed
,cat
)
806 $(Q
)$(MAKE
) $(build
)=arch
/arm
/imx-common
$@
808 quiet_cmd_copy
= COPY
$@
811 u-boot.dtb
: dts
/dt.dtb
814 OBJCOPYFLAGS_u-boot.hex
:= -O ihex
816 OBJCOPYFLAGS_u-boot.srec
:= -O srec
818 u-boot.hex u-boot.srec
: u-boot FORCE
819 $(call if_changed
,objcopy
)
821 OBJCOPYFLAGS_u-boot.bin
:= -O binary
823 u-boot.bin
: u-boot FORCE
824 $(call if_changed
,objcopy
)
825 $(call DO_STATIC_RELA
,$<,$@
,$(CONFIG_SYS_TEXT_BASE
))
830 $(LDR
) -T
$(CONFIG_BFIN_CPU
) -c
$@
$< $(LDR_FLAGS
)
833 OBJCOPYFLAGS_u-boot.ldr.hex
:= -I binary
-O ihex
835 OBJCOPYFLAGS_u-boot.ldr.srec
:= -I binary
-O srec
837 u-boot.ldr.hex u-boot.ldr.srec
: u-boot.ldr FORCE
838 $(call if_changed
,objcopy
)
841 # U-Boot entry point, needed for booting of full-blown U-Boot
842 # from the SPL U-Boot version.
844 ifndef CONFIG_SYS_UBOOT_START
845 CONFIG_SYS_UBOOT_START
:= 0
848 MKIMAGEFLAGS_u-boot.img
= -A
$(ARCH
) -T firmware
-C none
-O u-boot \
849 -a
$(CONFIG_SYS_TEXT_BASE
) -e
$(CONFIG_SYS_UBOOT_START
) \
850 -n
"U-Boot $(UBOOTRELEASE) for $(BOARD) board"
852 MKIMAGEFLAGS_u-boot.kwb
= -n
$(srctree
)/$(CONFIG_SYS_KWD_CONFIG
:"%"=%) \
853 -T kwbimage
-a
$(CONFIG_SYS_TEXT_BASE
) -e
$(CONFIG_SYS_TEXT_BASE
)
855 MKIMAGEFLAGS_u-boot.pbl
= -n
$(srctree
)/$(CONFIG_SYS_FSL_PBL_RCW
:"%"=%) \
856 -R
$(srctree
)/$(CONFIG_SYS_FSL_PBL_PBI
:"%"=%) -T pblimage
858 u-boot.img u-boot.kwb u-boot.pbl
: u-boot.bin FORCE
859 $(call if_changed
,mkimage
)
861 MKIMAGEFLAGS_u-boot-dtb.img
= $(MKIMAGEFLAGS_u-boot.img
)
863 u-boot-dtb.img
: u-boot-dtb.bin FORCE
864 $(call if_changed
,mkimage
)
866 u-boot.sha1
: u-boot.bin
867 tools
/ubsha1 u-boot.bin
870 $(OBJDUMP
) -d
$< > $@
873 SPL_PAYLOAD
:= tpl
/u-boot-with-tpl.bin
875 SPL_PAYLOAD
:= u-boot.bin
878 OBJCOPYFLAGS_u-boot-with-spl.bin
= -I binary
-O binary \
879 --pad-to
=$(CONFIG_SPL_PAD_TO
)
880 u-boot-with-spl.bin
: spl
/u-boot-spl.bin
$(SPL_PAYLOAD
) FORCE
881 $(call if_changed
,pad_cat
)
883 OBJCOPYFLAGS_u-boot-with-tpl.bin
= -I binary
-O binary \
884 --pad-to
=$(CONFIG_TPL_PAD_TO
)
885 tpl
/u-boot-with-tpl.bin
: tpl
/u-boot-tpl.bin u-boot.bin FORCE
886 $(call if_changed
,pad_cat
)
888 SPL
: spl
/u-boot-spl.bin FORCE
889 $(Q
)$(MAKE
) $(build
)=arch
/arm
/imx-common
$@
891 u-boot-with-spl.imx u-boot-with-nand-spl.imx
: SPL u-boot.bin FORCE
892 $(Q
)$(MAKE
) $(build
)=arch
/arm
/imx-common
$@
894 MKIMAGEFLAGS_u-boot.ubl
= -n
$(UBL_CONFIG
) -T ublimage
-e
$(CONFIG_SYS_TEXT_BASE
)
896 u-boot.ubl
: u-boot-with-spl.bin FORCE
897 $(call if_changed
,mkimage
)
899 MKIMAGEFLAGS_u-boot-spl.ais
= -s
-n
$(if
$(CONFIG_AIS_CONFIG_FILE
), \
900 $(srctree
)/$(CONFIG_AIS_CONFIG_FILE
:"%"=%),"/dev/null") \
901 -T aisimage
-e
$(CONFIG_SPL_TEXT_BASE
)
902 spl
/u-boot-spl.ais
: spl
/u-boot-spl.bin FORCE
903 $(call if_changed
,mkimage
)
905 OBJCOPYFLAGS_u-boot.ais
= -I binary
-O binary
--pad-to
=$(CONFIG_SPL_PAD_TO
)
906 u-boot.ais
: spl
/u-boot-spl.ais u-boot.img FORCE
907 $(call if_changed
,pad_cat
)
909 u-boot-signed.sb
: u-boot.bin spl
/u-boot-spl.bin
910 $(Q
)$(MAKE
) $(build
)=arch
/arm
/cpu
/arm926ejs
/mxs u-boot-signed.sb
911 u-boot.sb
: u-boot.bin spl
/u-boot-spl.bin
912 $(Q
)$(MAKE
) $(build
)=arch
/arm
/cpu
/arm926ejs
/mxs u-boot.sb
914 # On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
915 # Both images are created using mkimage (crc etc), so that the ROM
916 # bootloader can check its integrity. Padding needs to be done to the
917 # SPL image (with mkimage header) and not the binary. Otherwise the resulting image
918 # which is loaded/copied by the ROM bootloader to SRAM doesn't fit.
919 # The resulting image containing both U-Boot images is called u-boot.spr
920 MKIMAGEFLAGS_u-boot-spl.img
= -A
$(ARCH
) -T firmware
-C none \
921 -a
$(CONFIG_SPL_TEXT_BASE
) -e
$(CONFIG_SPL_TEXT_BASE
) -n XLOADER
922 spl
/u-boot-spl.img
: spl
/u-boot-spl.bin FORCE
923 $(call if_changed
,mkimage
)
925 OBJCOPYFLAGS_u-boot.spr
= -I binary
-O binary
--pad-to
=$(CONFIG_SPL_PAD_TO
) \
927 u-boot.spr
: spl
/u-boot-spl.img u-boot.img FORCE
928 $(call if_changed
,pad_cat
)
930 MKIMAGEFLAGS_u-boot-spl.gph
= -A
$(ARCH
) -T gpimage
-C none \
931 -a
$(CONFIG_SPL_TEXT_BASE
) -e
$(CONFIG_SPL_TEXT_BASE
) -n SPL
932 spl
/u-boot-spl.gph
: spl
/u-boot-spl.bin FORCE
933 $(call if_changed
,mkimage
)
935 OBJCOPYFLAGS_u-boot-spi.gph
= -I binary
-O binary
--pad-to
=$(CONFIG_SPL_PAD_TO
) \
937 u-boot-spi.gph
: spl
/u-boot-spl.gph u-boot.img FORCE
938 $(call if_changed
,pad_cat
)
940 ifneq ($(CONFIG_SUNXI
),)
941 OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin
= -I binary
-O binary \
942 --pad-to
=$(CONFIG_SPL_PAD_TO
) --gap-fill
=0xff
943 u-boot-sunxi-with-spl.bin
: spl
/sunxi-spl.bin u-boot.img FORCE
944 $(call if_changed
,pad_cat
)
947 ifneq ($(CONFIG_TEGRA
),)
948 OBJCOPYFLAGS_u-boot-nodtb-tegra.bin
= -O binary
--pad-to
=$(CONFIG_SYS_TEXT_BASE
)
949 u-boot-nodtb-tegra.bin
: spl
/u-boot-spl u-boot.bin FORCE
950 $(call if_changed
,pad_cat
)
952 ifeq ($(CONFIG_OF_SEPARATE
),y
)
953 u-boot-dtb-tegra.bin
: u-boot-nodtb-tegra.bin dts
/dt.dtb FORCE
954 $(call if_changed
,cat
)
958 u-boot-img.bin
: spl
/u-boot-spl.bin u-boot.img FORCE
959 $(call if_changed
,cat
)
961 #Add a target to create boot binary having SPL binary in PBI format
962 #concatenated with u-boot binary. It is need by PowerPC SoC having
963 #internal SRAM <= 512KB.
964 MKIMAGEFLAGS_u-boot-spl.pbl
= -n
$(srctree
)/$(CONFIG_SYS_FSL_PBL_RCW
:"%"=%) \
965 -R
$(srctree
)/$(CONFIG_SYS_FSL_PBL_PBI
:"%"=%) -T pblimage
967 spl
/u-boot-spl.pbl
: spl
/u-boot-spl.bin FORCE
968 $(call if_changed
,mkimage
)
970 OBJCOPYFLAGS_u-boot-with-spl-pbl.bin
= -I binary
-O binary
--pad-to
=$(CONFIG_SPL_PAD_TO
) \
973 u-boot-with-spl-pbl.bin
: spl
/u-boot-spl.pbl u-boot.bin FORCE
974 $(call if_changed
,pad_cat
)
976 # PPC4xx needs the SPL at the end of the image, since the reset vector
977 # is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
978 # and need to introduce a new build target with the full blown U-Boot
979 # at the start padded up to the start of the SPL image. And then concat
980 # the SPL image to the end.
982 OBJCOPYFLAGS_u-boot-img-spl-at-end.bin
:= -I binary
-O binary \
983 --pad-to
=$(CONFIG_UBOOT_PAD_TO
) --gap-fill
=0xff
984 u-boot-img-spl-at-end.bin
: u-boot.img spl
/u-boot-spl.bin FORCE
985 $(call if_changed
,pad_cat
)
987 # Create a new ELF from a raw binary file. This is useful for arm64
988 # where static relocation needs to be performed on the raw binary,
989 # but certain simulators only accept an ELF file (but don't do the
991 # FIXME refactor dts/Makefile to share target/arch detection
992 u-boot.elf
: u-boot.bin
993 @
$(OBJCOPY
) -B aarch64
-I binary
-O elf64-littleaarch64 \
995 @
$(LD
) u-boot-elf.o
-o
$@ \
996 --defsym
=_start
=$(CONFIG_SYS_TEXT_BASE
) \
997 -Ttext
=$(CONFIG_SYS_TEXT_BASE
)
999 # Rule to link u-boot
1000 # May be overridden by arch/$(ARCH)/config.mk
1001 quiet_cmd_u-boot__ ?
= LD
$@
1002 cmd_u-boot__ ?
= $(LD
) $(LDFLAGS
) $(LDFLAGS_u-boot
) -o
$@ \
1003 -T u-boot.lds
$(u-boot-init
) \
1004 --start-group
$(u-boot-main
) --end-group \
1005 $(PLATFORM_LIBS
) -Map u-boot.map
1007 u-boot
: $(u-boot-init
) $(u-boot-main
) u-boot.lds
1008 $(call if_changed
,u-boot__
)
1009 ifeq ($(CONFIG_KALLSYMS
),y
)
1010 smap
=`$(call SYSTEM_MAP,u-boot) | \
1011 awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
1012 $(CC
) $(c_flags
) -DSYSTEM_MAP
="\"$${smap}\"" \
1013 -c
$(srctree
)/common
/system_map.c
-o common
/system_map.o
1014 $(call cmd
,u-boot__
) common
/system_map.o
1017 # The actual objects are generated when descending,
1018 # make sure no implicit rule kicks in
1019 $(sort $(u-boot-init
) $(u-boot-main
)): $(u-boot-dirs
) ;
1021 # Handle descending into subdirectories listed in $(vmlinux-dirs)
1022 # Preset locale variables to speed up the build process. Limit locale
1023 # tweaks to this spot to avoid wrong language settings when running
1024 # make menuconfig etc.
1025 # Error messages still appears in the original language
1027 PHONY
+= $(u-boot-dirs
)
1028 $(u-boot-dirs
): prepare scripts
1029 $(Q
)$(MAKE
) $(build
)=$@
1032 # The "tools" are needed early
1033 $(filter-out tools
, $(u-boot-dirs
)): tools
1034 # The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
1035 # is "yes"), so compile examples after U-Boot is compiled.
1036 examples
: $(filter-out examples
, $(u-boot-dirs
))
1038 define filechk_uboot.release
1039 echo
"$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1042 # Store (new) UBOOTRELEASE string in include/config/uboot.release
1043 include/config
/uboot.release
: Makefile FORCE
1044 $(call filechk
,uboot.release
)
1047 # Things we need to do before we recursively start building the kernel
1048 # or the modules are listed in "prepare".
1049 # A multi level approach is used. prepareN is processed before prepareN-1.
1050 # archprepare is used in arch Makefiles and when processed asm symlink,
1051 # version.h and scripts_basic is processed / created.
1053 # Listed in dependency order
1054 PHONY
+= prepare archprepare prepare0 prepare1 prepare2 prepare3
1056 # prepare3 is used to check if we are building in a separate output directory,
1058 # 1) Check that make has not been executed in the kernel src $(srctree)
1059 prepare3
: include/config
/uboot.release
1060 ifneq ($(KBUILD_SRC
),)
1061 @
$(kecho
) ' Using $(srctree) as source for u-boot'
1062 $(Q
)if
[ -f
$(srctree
)/include/config.mk
]; then \
1063 echo
>&2 " $(srctree) is not clean, please run 'make mrproper'"; \
1064 echo
>&2 " in the '$(srctree)' directory.";\
1069 # prepare2 creates a makefile if using a separate output directory
1070 prepare2
: prepare3 outputmakefile
1072 prepare1
: prepare2
$(version_h
) $(timestamp_h
)
1073 ifeq ($(__HAVE_ARCH_GENERIC_BOARD
),)
1074 ifeq ($(CONFIG_SYS_GENERIC_BOARD
),y
)
1075 @echo
>&2 " Your architecture does not support generic board."
1076 @echo
>&2 " Please undefine CONFIG_SYS_GENERIC_BOARD in your board config file."
1080 ifeq ($(wildcard $(LDSCRIPT
)),)
1081 @echo
>&2 " Could not find linker script."
1085 archprepare
: prepare1 scripts_basic
1087 prepare0
: archprepare FORCE
1088 $(Q
)$(MAKE
) $(build
)=.
1090 # All the preparing..
1093 # Generate some files
1094 # ---------------------------------------------------------------------------
1096 define filechk_version.h
1097 (echo \
#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \
1098 echo \
#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \
1099 echo \
#define CC_VERSION_STRING \"$$($(CC) --version | head -n 1)\"; \
1100 echo \
#define LD_VERSION_STRING \"$$($(LD) --version | head -n 1)\"; )
1103 define filechk_timestamp.h
1104 (LC_ALL
=C date
+'#define U_BOOT_DATE "%b %d %C%y"'; \
1105 LC_ALL
=C date
+'#define U_BOOT_TIME "%T"')
1108 $(version_h
): include/config
/uboot.release FORCE
1109 $(call filechk
,version.h
)
1111 $(timestamp_h
): $(srctree
)/Makefile FORCE
1112 $(call filechk
,timestamp.h
)
1115 # Auto-generate the autoconf.mk file (which is included by all makefiles)
1117 # This target actually generates 2 files; autoconf.mk and autoconf.mk.dep.
1118 # the dep file is only include in this top level makefile to determine when
1119 # to regenerate the autoconf.mk file.
1121 quiet_cmd_autoconf_dep
= GEN
$@
1122 cmd_autoconf_dep
= $(CC
) -x c
-DDO_DEPS_ONLY
-M
$(c_flags
) \
1123 -MQ
include/autoconf.mk
$(srctree
)/include/common.h
> $@ ||
rm $@
1125 include/autoconf.mk.dep
: include/config.h
include/common.h
1126 $(call cmd
,autoconf_dep
)
1128 quiet_cmd_autoconf
= GEN
$@
1130 $(CPP
) $(c_flags
) -DDO_DEPS_ONLY
-dM
$(srctree
)/include/common.h
> $@.tmp
&& \
1131 sed
-n
-f
$(srctree
)/tools
/scripts
/define2mk.sed
$@.tmp
> $@
; \
1134 include/autoconf.mk
: include/config.h
1135 $(call cmd
,autoconf
)
1137 # ---------------------------------------------------------------------------
1141 @echo
'*** Warning: make $@ is unnecessary now.'
1143 # ---------------------------------------------------------------------------
1144 quiet_cmd_cpp_lds
= LDS
$@
1145 cmd_cpp_lds
= $(CPP
) -Wp
,-MD
,$(depfile
) $(cpp_flags
) $(LDPPFLAGS
) -ansi \
1146 -D__ASSEMBLY__
-x assembler-with-cpp
-P
-o
$@
$<
1148 u-boot.lds
: $(LDSCRIPT
) prepare FORCE
1149 $(call if_changed_dep
,cpp_lds
)
1153 $(Q
)$(MAKE
) $(build
)=nand_spl
/board
/$(BOARDDIR
) all
1155 @echo
>&2 "==================== WARNING ====================="
1156 @echo
>&2 "nand_spl will not be included in v2014.07 release."
1157 @echo
>&2 "Please switch over to SPL."
1158 @echo
>&2 "Otherwise, this board will be removed."
1159 @echo
>&2 "=================================================="
1162 nand_spl
/u-boot-spl-16k.bin
: nand_spl
1165 u-boot-nand.bin
: nand_spl
/u-boot-spl-16k.bin u-boot.bin FORCE
1166 $(call if_changed
,cat
)
1168 spl
/u-boot-spl.bin
: spl
/u-boot-spl
1170 spl
/u-boot-spl
: tools prepare
1171 $(Q
)$(MAKE
) obj
=spl
-f
$(srctree
)/spl
/Makefile
all
1173 spl
/sunxi-spl.bin
: spl
/u-boot-spl
1176 tpl
/u-boot-tpl.bin
: tools prepare
1177 $(Q
)$(MAKE
) obj
=tpl
-f
$(srctree
)/spl
/Makefile
all CONFIG_TPL_BUILD
=y
1179 TAG_SUBDIRS
:= $(u-boot-dirs
) include
1185 ctags
-w
-o ctags
`$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
1186 -name '*.[chS]' -print`
1189 etags
-a
-o
$(obj
)etags
`$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
1190 -name '*.[chS]' -print`
1192 $(FIND
) $(FINDFLAGS
) $(TAG_SUBDIRS
) -name
'*.[chS]' -print > \
1198 grep
-v
'\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
1201 @
$(call SYSTEM_MAP
,$<) > $@
1204 @if
test $(call dtc-version
) -lt
0104; then \
1205 echo
'*** Your dtc is too old, please upgrade to dtc 1.4 or newer'; \
1209 #########################################################################
1211 # ARM relocations should all be R_ARM_RELATIVE (32-bit) or
1212 # R_AARCH64_RELATIVE (64-bit).
1213 checkarmreloc
: u-boot
1214 @RELOC
="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \
1215 grep R_A | sort -u`"; \
1216 if
test "$$RELOC" != "R_ARM_RELATIVE" -a \
1217 "$$RELOC" != "R_AARCH64_RELATIVE"; then \
1218 echo
"$< contains unexpected relocations: $$RELOC"; \
1223 $(Q
)$(MAKE
) $(build
)=tools
/$@
1225 tools-only
: scripts_basic
$(version_h
) $(timestamp_h
)
1226 $(Q
)$(MAKE
) $(build
)=tools
1228 tools-all
: export HOST_TOOLS_ALL
=y
1229 tools-all
: env tools
;
1231 cross_tools
: export CROSS_BUILD_TOOLS
=y
1232 cross_tools
: tools
;
1236 git log
--no-merges U-Boot-1_1_5.. | \
1237 unexpand
-a | sed
-e
's/\s\s*$$//' > $@
1239 include/license.h
: tools
/bin2header COPYING
1240 cat COPYING | gzip
-9 -c | .
/tools
/bin2header license_gzip
> include/license.h
1241 #########################################################################
1244 # Cleaning is done on three levels.
1245 # make clean Delete most generated files
1246 # Leave enough to build external modules
1247 # make mrproper Delete the current configuration, and all generated files
1248 # make distclean Remove editor backup files, patch leftover files and the like
1250 # Directories & files removed with 'make clean'
1251 CLEAN_DIRS
+= $(MODVERDIR
)
1252 CLEAN_FILES
+= u-boot.lds
include/bmp_logo.h
include/bmp_logo_data.h \
1253 include/autoconf.mk
* include/spl-autoconf.mk \
1254 include/tpl-autoconf.mk
1256 # Directories & files removed with 'make clobber'
1257 CLOBBER_DIRS
+= $(patsubst %,spl
/%, $(filter-out Makefile
, \
1258 $(shell ls
-1 spl
2>/dev
/null
))) \
1260 CLOBBER_FILES
+= u-boot
* MLO
* SPL System.map nand_spl
/u-boot
*
1262 # Directories & files removed with 'make mrproper'
1263 MRPROPER_DIRS
+= include/config
include/generated \
1265 MRPROPER_FILES
+= .config .config.old \
1266 tags TAGS cscope
* GPATH GTAGS GRTAGS GSYMS \
1267 include/config.h
include/config.mk
1269 # clean - Delete most, but leave enough to build external modules
1271 clean: rm-dirs
:= $(CLEAN_DIRS
)
1272 clean: rm-files
:= $(CLEAN_FILES
)
1274 clean-dirs
:= $(foreach f
,$(u-boot-alldirs
),$(if
$(wildcard $(srctree
)/$f/Makefile
),$f))
1276 clean-dirs
:= $(addprefix _clean_
, $(clean-dirs
) doc
/DocBook
)
1278 PHONY
+= $(clean-dirs
) clean archclean
1280 $(Q
)$(MAKE
) $(clean)=$(patsubst _clean_
%,%,$@
)
1282 # TODO: Do not use *.cfgtmp
1283 clean: $(clean-dirs
)
1286 @find
$(if
$(KBUILD_EXTMOD
), $(KBUILD_EXTMOD
), .
) $(RCS_FIND_IGNORE
) \
1287 \
( -name
'*.[oas]' -o
-name
'*.ko' -o
-name
'.*.cmd' \
1288 -o
-name
'*.ko.*' -o
-name
'*.su' -o
-name
'*.cfgtmp' \
1289 -o
-name
'.*.d' -o
-name
'.*.tmp' -o
-name
'*.mod.c' \
1290 -o
-name
'*.symtypes' -o
-name
'modules.order' \
1291 -o
-name modules.builtin
-o
-name
'.tmp_*.o.*' \
1292 -o
-name
'*.gcno' \
) -type f
-print | xargs
rm -f
1293 @find
$(if
$(KBUILD_EXTMOD
), $(KBUILD_EXTMOD
), .
) $(RCS_FIND_IGNORE
) \
1294 -path
'./nand_spl/*' -type l
-print | xargs
rm -f
1298 clobber: rm-dirs
:= $(CLOBBER_DIRS
)
1299 clobber: rm-files
:= $(CLOBBER_FILES
)
1307 # mrproper - Delete all generated files, including .config
1309 mrproper
: rm-dirs
:= $(wildcard $(MRPROPER_DIRS
))
1310 mrproper
: rm-files
:= $(wildcard $(MRPROPER_FILES
))
1311 mrproper-dirs
:= $(addprefix _mrproper_
,scripts
)
1313 PHONY
+= $(mrproper-dirs
) mrproper archmrproper
1315 $(Q
)$(MAKE
) $(clean)=$(patsubst _mrproper_
%,%,$@
)
1317 mrproper
: clobber $(mrproper-dirs
)
1320 @
rm -f arch
/*/include/asm
/arch arch
/*/include/asm
/proc
1327 @find
$(srctree
) $(RCS_FIND_IGNORE
) \
1328 \
( -name
'*.orig' -o
-name
'*.rej' -o
-name
'*~' \
1329 -o
-name
'*.bak' -o
-name
'#*#' -o
-name
'.*.orig' \
1330 -o
-name
'.*.rej' -o
-name
'*%' -o
-name
'core' \
1331 -o
-name
'*.pyc' \
) \
1332 -type f
-print | xargs
rm -f
1335 F
=`basename $(srctree)` ; cd ..
; \
1336 gtar
--force-local
-zcvf
`LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
1339 @echo
'Cleaning targets:'
1340 @echo
' clean - Remove most generated files but keep the config and'
1341 @echo
' necessities for testing u-boot'
1342 @echo
' clobber - Remove most generated files but keep the config'
1343 @echo
' mrproper - Remove all generated files + config + various backup files'
1344 @echo
' distclean - mrproper + remove editor backup and patch files'
1346 # uncomment after adding Kconfig feature
1347 # @echo 'Configuration targets:'
1348 # @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
1350 @echo
'Other generic targets:'
1351 @echo
' all - Build all necessary images depending on configuration'
1352 @echo
' u-boot - Build the bare u-boot'
1353 @echo
' dir/ - Build all files in dir and below'
1354 @echo
' dir/file.[oisS] - Build specified target only'
1355 @echo
' dir/file.lst - Build specified mixed source/assembly target only'
1356 @echo
' (requires a recent binutils and recent build (System.map))'
1357 @echo
' tags/TAGS - Generate tags file for editors'
1358 @echo
' cscope - Generate cscope index'
1359 @echo
' ubootrelease - Output the release version string'
1360 @echo
' ubootversion - Output the version stored in Makefile'
1362 @echo
'Static analysers'
1363 @echo
' checkstack - Generate a list of stack hogs'
1365 @echo
'Documentation targets:'
1366 @
$(MAKE
) -f
$(srctree
)/doc
/DocBook
/Makefile dochelp
1368 @echo
' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
1369 @echo
' make V=2 [targets] 2 => give reason for rebuild of target'
1370 @echo
' make O=dir [targets] Locate all output files in "dir", including .config'
1371 @echo
' make C=1 [targets] Check all c source with $$CHECK (sparse by default)'
1372 @echo
' make C=2 [targets] Force check of all c source with $$CHECK'
1373 @echo
' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
1374 @echo
' make W=n [targets] Enable extra gcc checks, n=1,2,3 where'
1375 @echo
' 1: warnings which may be relevant and do not occur too often'
1376 @echo
' 2: warnings which occur quite often but may still be relevant'
1377 @echo
' 3: more obscure warnings, can most likely be ignored'
1378 @echo
' Multiple levels can be combined with W=12 or W=123'
1380 @echo
'Execute "make" or "make all" to build all targets marked with [*] '
1381 @echo
'For further info see the ./README file'
1384 # Documentation targets
1385 # ---------------------------------------------------------------------------
1386 %docs
: scripts_basic FORCE
1387 $(Q
)$(MAKE
) $(build
)=scripts build_docproc
1388 $(Q
)$(MAKE
) $(build
)=doc
/DocBook
$@
1391 PHONY
+= prepare scripts
1395 endif #ifeq ($(config-targets),1)
1396 endif #ifeq ($(mixed-targets),1)
1398 PHONY
+= checkstack ubootrelease ubootversion
1401 $(OBJDUMP
) -d u-boot
$$(find .
-name u-boot-spl
) | \
1402 $(PERL
) $(src
)/scripts
/checkstack.pl
$(ARCH
)
1405 @echo
"$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1408 @echo
$(UBOOTVERSION
)
1411 # ---------------------------------------------------------------------------
1412 # Single targets are compatible with:
1413 # - build with mixed source and output
1414 # - build with separate output dir 'make O=...'
1415 # - external modules
1417 # target-dir => where to store outputfile
1418 # build-dir => directory in kernel source tree to use
1420 ifeq ($(KBUILD_EXTMOD
),)
1421 build-dir
= $(patsubst %/,%,$(dir $@
))
1422 target-dir
= $(dir $@
)
1424 zap-slash
=$(filter-out .
,$(patsubst %/,%,$(dir $@
)))
1425 build-dir
= $(KBUILD_EXTMOD
)$(if
$(zap-slash
),/$(zap-slash
))
1426 target-dir
= $(if
$(KBUILD_EXTMOD
),$(dir $<),$(dir $@
))
1429 %.s
: %.c prepare scripts FORCE
1430 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(target-dir
)$(notdir $@
)
1431 %.i
: %.c prepare scripts FORCE
1432 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(target-dir
)$(notdir $@
)
1433 %.o
: %.c prepare scripts FORCE
1434 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(target-dir
)$(notdir $@
)
1435 %.lst
: %.c prepare scripts FORCE
1436 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(target-dir
)$(notdir $@
)
1437 %.s
: %.S prepare scripts FORCE
1438 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(target-dir
)$(notdir $@
)
1439 %.o
: %.S prepare scripts FORCE
1440 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(target-dir
)$(notdir $@
)
1441 %.symtypes
: %.c prepare scripts FORCE
1442 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(target-dir
)$(notdir $@
)
1445 /: prepare scripts FORCE
1447 $(Q
)$(MAKE
) KBUILD_MODULES
=$(if
$(CONFIG_MODULES
),1) \
1448 $(build
)=$(build-dir
)
1449 %/: prepare scripts FORCE
1451 $(Q
)$(MAKE
) KBUILD_MODULES
=$(if
$(CONFIG_MODULES
),1) \
1452 $(build
)=$(build-dir
)
1453 %.ko
: prepare scripts FORCE
1455 $(Q
)$(MAKE
) KBUILD_MODULES
=$(if
$(CONFIG_MODULES
),1) \
1456 $(build
)=$(build-dir
) $(@
:.ko
=.o
)
1457 $(Q
)$(MAKE
) -f
$(srctree
)/scripts
/Makefile.modpost
1459 # FIXME Should go into a make.lib or something
1460 # ===========================================================================
1462 quiet_cmd_rmdirs
= $(if
$(wildcard $(rm-dirs
)),CLEAN
$(wildcard $(rm-dirs
)))
1463 cmd_rmdirs
= rm -rf
$(rm-dirs
)
1465 quiet_cmd_rmfiles
= $(if
$(wildcard $(rm-files
)),CLEAN
$(wildcard $(rm-files
)))
1466 cmd_rmfiles
= rm -f
$(rm-files
)
1468 # read all saved command lines
1470 targets
:= $(wildcard $(sort $(targets
)))
1471 cmd_files
:= $(wildcard .
*.cmd
$(foreach f
,$(targets
),$(dir $(f
)).
$(notdir $(f
)).cmd
))
1473 ifneq ($(cmd_files
),)
1474 $(cmd_files
): ; # Do not try to update included dependency files
1475 include $(cmd_files
)
1478 # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
1480 # $(Q)$(MAKE) $(clean)=dir
1481 clean := -f
$(if
$(KBUILD_SRC
),$(srctree
)/)scripts
/Makefile.
clean obj
1483 endif # skip-makefile
1488 # Declare the contents of the .PHONY variable as phony. We keep that
1489 # information in a variable so we can use it in if_changed and friends.