Makefile

   1 #
   2 # (C) Copyright 2000-2009
   3 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4 #
   5 # See file CREDITS for list of people who contributed to this
   6 # project.
   7 #
   8 # This program is free software; you can redistribute it and/or
   9 # modify it under the terms of the GNU General Public License as
  10 # published by the Free Software Foundatio; either version 2 of
  11 # the License, or (at your option) any later version.
  12 #
  13 # This program is distributed in the hope that it will be useful,
  14 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  15 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16 # GNU General Public License for more details.
  17 #
  18 # You should have received a copy of the GNU General Public License
  19 # along with this program; if not, write to the Free Software
  20 # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21 # MA 02111-1307 USA
  22 #
  23
  24 VERSION = 2009
  25 PATCHLEVEL = 08
  26 SUBLEVEL =
  27 EXTRAVERSION = -rc3
  28 ifneq "$(SUBLEVEL)" ""
  29 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
  30 else
  31 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION)
  32 endif
  33 TIMESTAMP_FILE = $(obj)include/timestamp_autogenerated.h
  34 VERSION_FILE = $(obj)include/version_autogenerated.h
  35
  36 HOSTARCH := $(shell uname -m | \
  37         sed -e s/i.86/i386/ \
  38             -e s/sun4u/sparc64/ \
  39             -e s/arm.*/arm/ \
  40             -e s/sa110/arm/ \
  41             -e s/powerpc/ppc/ \
  42             -e s/ppc64/ppc/ \
  43             -e s/macppc/ppc/)
  44
  45 HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
  46             sed -e 's/\(cygwin\).*/cygwin/')
  47
  48 # Set shell to bash if possible, otherwise fall back to sh
  49 SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
  50         else if [ -x /bin/bash ]; then echo /bin/bash; \
  51         else echo sh; fi; fi)
  52
  53 export  HOSTARCH HOSTOS SHELL
  54
  55 # Deal with colliding definitions from tcsh etc.
  56 VENDOR=
  57
  58 #########################################################################
  59 # Allow for silent builds
  60 ifeq (,$(findstring s,$(MAKEFLAGS)))
  61 XECHO = echo
  62 else
  63 XECHO = :
  64 endif
  65
  66 #########################################################################
  67 #
  68 # U-boot build supports producing a object files to the separate external
  69 # directory. Two use cases are supported:
  70 #
  71 # 1) Add O= to the make command line
  72 # 'make O=/tmp/build all'
  73 #
  74 # 2) Set environement variable BUILD_DIR to point to the desired location
  75 # 'export BUILD_DIR=/tmp/build'
  76 # 'make'
  77 #
  78 # The second approach can also be used with a MAKEALL script
  79 # 'export BUILD_DIR=/tmp/build'
  80 # './MAKEALL'
  81 #
  82 # Command line 'O=' setting overrides BUILD_DIR environent variable.
  83 #
  84 # When none of the above methods is used the local build is performed and
  85 # the object files are placed in the source directory.
  86 #
  87
  88 ifdef O
  89 ifeq ("$(origin O)", "command line")
  90 BUILD_DIR := $(O)
  91 endif
  92 endif
  93
  94 ifneq ($(BUILD_DIR),)
  95 saved-output := $(BUILD_DIR)
  96
  97 # Attempt to create a output directory.
  98 $(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR})
  99
 100 # Verify if it was successful.
 101 BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd)
 102 $(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist))
 103 endif # ifneq ($(BUILD_DIR),)
 104
 105 OBJTREE         := $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR))
 106 SRCTREE         := $(CURDIR)
 107 TOPDIR          := $(SRCTREE)
 108 LNDIR           := $(OBJTREE)
 109 export  TOPDIR SRCTREE OBJTREE
 110
 111 MKCONFIG        := $(SRCTREE)/mkconfig
 112 export MKCONFIG
 113
 114 ifneq ($(OBJTREE),$(SRCTREE))
 115 REMOTE_BUILD    := 1
 116 export REMOTE_BUILD
 117 endif
 118
 119 # $(obj) and (src) are defined in config.mk but here in main Makefile
 120 # we also need them before config.mk is included which is the case for
 121 # some targets like unconfig, clean, clobber, distclean, etc.
 122 ifneq ($(OBJTREE),$(SRCTREE))
 123 obj := $(OBJTREE)/
 124 src := $(SRCTREE)/
 125 else
 126 obj :=
 127 src :=
 128 endif
 129 export obj src
 130
 131 # Make sure CDPATH settings don't interfere
 132 unexport CDPATH
 133
 134 #########################################################################
 135
 136 ifeq ($(ARCH),powerpc)
 137 ARCH = ppc
 138 endif
 139
 140 # The "tools" are needed early, so put this first
 141 # Don't include stuff already done in $(LIBS)
 142 SUBDIRS = tools \
 143           examples/standalone \
 144           examples/api
 145
 146 .PHONY : $(SUBDIRS)
 147
 148 ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk))
 149
 150 # Include autoconf.mk before config.mk so that the config options are available
 151 # to all top level build files.  We need the dummy all: target to prevent the
 152 # dependency target in autoconf.mk.dep from being the default.
 153 all:
 154 sinclude $(obj)include/autoconf.mk.dep
 155 sinclude $(obj)include/autoconf.mk
 156
 157 # load ARCH, BOARD, and CPU configuration
 158 include $(obj)include/config.mk
 159 export  ARCH CPU BOARD VENDOR SOC
 160
 161 # set default to nothing for native builds
 162 ifeq ($(HOSTARCH),$(ARCH))
 163 CROSS_COMPILE ?=
 164 endif
 165
 166 # load other configuration
 167 include $(TOPDIR)/config.mk
 168
 169 #########################################################################
 170 # U-Boot objects....order is important (i.e. start must be first)
 171
 172 OBJS  = cpu/$(CPU)/start.o
 173 ifeq ($(CPU),i386)
 174 OBJS += cpu/$(CPU)/start16.o
 175 OBJS += cpu/$(CPU)/resetvec.o
 176 endif
 177 ifeq ($(CPU),ppc4xx)
 178 OBJS += cpu/$(CPU)/resetvec.o
 179 endif
 180 ifeq ($(CPU),mpc85xx)
 181 OBJS += cpu/$(CPU)/resetvec.o
 182 endif
 183
 184 OBJS := $(addprefix $(obj),$(OBJS))
 185
 186 LIBS  = lib_generic/libgeneric.a
 187 LIBS += lib_generic/lzma/liblzma.a
 188 LIBS += lib_generic/lzo/liblzo.a
 189 LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \
 190         "board/$(VENDOR)/common/lib$(VENDOR).a"; fi)
 191 LIBS += cpu/$(CPU)/lib$(CPU).a
 192 ifdef SOC
 193 LIBS += cpu/$(CPU)/$(SOC)/lib$(SOC).a
 194 endif
 195 ifeq ($(CPU),ixp)
 196 LIBS += cpu/ixp/npe/libnpe.a
 197 endif
 198 LIBS += lib_$(ARCH)/lib$(ARCH).a
 199 LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \
 200         fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a \
 201         fs/ubifs/libubifs.a
 202 LIBS += net/libnet.a
 203 LIBS += disk/libdisk.a
 204 LIBS += drivers/bios_emulator/libatibiosemu.a
 205 LIBS += drivers/block/libblock.a
 206 LIBS += drivers/dma/libdma.a
 207 LIBS += drivers/fpga/libfpga.a
 208 LIBS += drivers/gpio/libgpio.a
 209 LIBS += drivers/hwmon/libhwmon.a
 210 LIBS += drivers/i2c/libi2c.a
 211 LIBS += drivers/input/libinput.a
 212 LIBS += drivers/misc/libmisc.a
 213 LIBS += drivers/mmc/libmmc.a
 214 LIBS += drivers/mtd/libmtd.a
 215 LIBS += drivers/mtd/nand/libnand.a
 216 LIBS += drivers/mtd/onenand/libonenand.a
 217 LIBS += drivers/mtd/ubi/libubi.a
 218 LIBS += drivers/mtd/spi/libspi_flash.a
 219 LIBS += drivers/net/libnet.a
 220 LIBS += drivers/net/phy/libphy.a
 221 LIBS += drivers/net/sk98lin/libsk98lin.a
 222 LIBS += drivers/pci/libpci.a
 223 LIBS += drivers/pcmcia/libpcmcia.a
 224 LIBS += drivers/power/libpower.a
 225 LIBS += drivers/spi/libspi.a
 226 ifeq ($(CPU),mpc83xx)
 227 LIBS += drivers/qe/qe.a
 228 endif
 229 ifeq ($(CPU),mpc85xx)
 230 LIBS += drivers/qe/qe.a
 231 LIBS += cpu/mpc8xxx/ddr/libddr.a
 232 LIBS += cpu/mpc8xxx/lib8xxx.a
 233 TAG_SUBDIRS += cpu/mpc8xxx
 234 endif
 235 ifeq ($(CPU),mpc86xx)
 236 LIBS += cpu/mpc8xxx/ddr/libddr.a
 237 LIBS += cpu/mpc8xxx/lib8xxx.a
 238 TAG_SUBDIRS += cpu/mpc8xxx
 239 endif
 240 LIBS += drivers/rtc/librtc.a
 241 LIBS += drivers/serial/libserial.a
 242 LIBS += drivers/twserial/libtws.a
 243 LIBS += drivers/usb/gadget/libusb_gadget.a
 244 LIBS += drivers/usb/host/libusb_host.a
 245 LIBS += drivers/usb/musb/libusb_musb.a
 246 LIBS += drivers/video/libvideo.a
 247 LIBS += drivers/watchdog/libwatchdog.a
 248 LIBS += common/libcommon.a
 249 LIBS += libfdt/libfdt.a
 250 LIBS += api/libapi.a
 251 LIBS += post/libpost.a
 252
 253 LIBS := $(addprefix $(obj),$(LIBS))
 254 .PHONY : $(LIBS) $(TIMESTAMP_FILE) $(VERSION_FILE)
 255
 256 LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).a
 257 LIBBOARD := $(addprefix $(obj),$(LIBBOARD))
 258
 259 # Add GCC lib
 260 ifdef USE_PRIVATE_LIBGCC
 261 ifeq ("$(USE_PRIVATE_LIBGCC)", "yes")
 262 PLATFORM_LIBGCC = -L $(OBJTREE)/lib_$(ARCH) -lgcc
 263 else
 264 PLATFORM_LIBGCC = -L $(USE_PRIVATE_LIBGCC) -lgcc
 265 endif
 266 else
 267 PLATFORM_LIBGCC = -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
 268 endif
 269 PLATFORM_LIBS += $(PLATFORM_LIBGCC)
 270 export PLATFORM_LIBS
 271
 272 # Special flags for CPP when processing the linker script.
 273 # Pass the version down so we can handle backwards compatibility
 274 # on the fly.
 275 LDPPFLAGS += \
 276         -include $(TOPDIR)/include/u-boot/u-boot.lds.h \
 277         $(shell $(LD) --version | \
 278           sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
 279
 280 ifeq ($(CONFIG_NAND_U_BOOT),y)
 281 NAND_SPL = nand_spl
 282 U_BOOT_NAND = $(obj)u-boot-nand.bin
 283 endif
 284
 285 ifeq ($(CONFIG_ONENAND_U_BOOT),y)
 286 ONENAND_IPL = onenand_ipl
 287 U_BOOT_ONENAND = $(obj)u-boot-onenand.bin
 288 endif
 289
 290 __OBJS := $(subst $(obj),,$(OBJS))
 291 __LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD))
 292
 293 #########################################################################
 294 #########################################################################
 295
 296 # Always append ALL so that arch config.mk's can add custom ones
 297 ALL += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND) $(U_BOOT_ONENAND)
 298
 299 all:            $(ALL)
 300
 301 $(obj)u-boot.hex:       $(obj)u-boot
 302                 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@
 303
 304 $(obj)u-boot.srec:      $(obj)u-boot
 305                 $(OBJCOPY) -O srec $< $@
 306
 307 $(obj)u-boot.bin:       $(obj)u-boot
 308                 $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
 309
 310 $(obj)u-boot.ldr:       $(obj)u-boot
 311                 $(obj)tools/envcrc --binary > $(obj)env-ldr.o
 312                 $(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS)
 313
 314 $(obj)u-boot.ldr.hex:   $(obj)u-boot.ldr
 315                 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary
 316
 317 $(obj)u-boot.ldr.srec:  $(obj)u-boot.ldr
 318                 $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary
 319
 320 $(obj)u-boot.img:       $(obj)u-boot.bin
 321                 ./tools/mkimage -A $(ARCH) -T firmware -C none \
 322                 -a $(TEXT_BASE) -e 0 \
 323                 -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
 324                         sed -e 's/"[     ]*$$/ for $(BOARD) board"/') \
 325                 -d $< $@
 326
 327 $(obj)u-boot.sha1:      $(obj)u-boot.bin
 328                 $(obj)tools/ubsha1 $(obj)u-boot.bin
 329
 330 $(obj)u-boot.dis:       $(obj)u-boot
 331                 $(OBJDUMP) -d $< > $@
 332
 333 GEN_UBOOT = \
 334                 UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \
 335                 sed  -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
 336                 cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
 337                         --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
 338                         -Map u-boot.map -o u-boot
 339 $(obj)u-boot:   depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds
 340                 $(GEN_UBOOT)
 341 ifeq ($(CONFIG_KALLSYMS),y)
 342                 smap=`$(call SYSTEM_MAP,u-boot) | \
 343                         awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
 344                 $(CC) $(CFLAGS) -DSYSTEM_MAP="\"$${smap}\"" \
 345                         -c common/system_map.c -o $(obj)common/system_map.o
 346                 $(GEN_UBOOT) $(obj)common/system_map.o
 347 endif
 348
 349 $(OBJS):        depend
 350                 $(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@))
 351
 352 $(LIBS):        depend $(SUBDIRS)
 353                 $(MAKE) -C $(dir $(subst $(obj),,$@))
 354
 355 $(LIBBOARD):    depend $(LIBS)
 356                 $(MAKE) -C $(dir $(subst $(obj),,$@))
 357
 358 $(SUBDIRS):     depend
 359                 $(MAKE) -C $@ all
 360
 361 $(LDSCRIPT):    depend
 362                 $(MAKE) -C $(dir $@) $(notdir $@)
 363
 364 $(obj)u-boot.lds: $(LDSCRIPT)
 365                 $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
 366
 367 $(NAND_SPL):    $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
 368                 $(MAKE) -C nand_spl/board/$(BOARDDIR) all
 369
 370 $(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin
 371                 cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
 372
 373 $(ONENAND_IPL): $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
 374                 $(MAKE) -C onenand_ipl/board/$(BOARDDIR) all
 375
 376 $(U_BOOT_ONENAND):      $(ONENAND_IPL) $(obj)u-boot.bin
 377                 cat $(obj)onenand_ipl/onenand-ipl-2k.bin $(obj)u-boot.bin > $(obj)u-boot-onenand.bin
 378                 cat $(obj)onenand_ipl/onenand-ipl-4k.bin $(obj)u-boot.bin > $(obj)u-boot-flexonenand.bin
 379
 380 $(VERSION_FILE):
 381                 @( printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' "$(U_BOOT_VERSION)" \
 382                  '$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ) > $@.tmp
 383                 @cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@
 384
 385 $(TIMESTAMP_FILE):
 386                 @date +'#define U_BOOT_DATE "%b %d %C%y"' > $@
 387                 @date +'#define U_BOOT_TIME "%T"' >> $@
 388
 389 gdbtools:
 390                 $(MAKE) -C tools/gdb all || exit 1
 391
 392 updater:
 393                 $(MAKE) -C tools/updater all || exit 1
 394
 395 env:
 396                 $(MAKE) -C tools/env all MTD_VERSION=${MTD_VERSION} || exit 1
 397
 398 depend dep:     $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
 399                 for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; done
 400
 401 TAG_SUBDIRS += include
 402 TAG_SUBDIRS += lib_generic board/$(BOARDDIR)
 403 TAG_SUBDIRS += cpu/$(CPU)
 404 TAG_SUBDIRS += lib_$(ARCH)
 405 TAG_SUBDIRS += fs/cramfs
 406 TAG_SUBDIRS += fs/fat
 407 TAG_SUBDIRS += fs/fdos
 408 TAG_SUBDIRS += fs/jffs2
 409 TAG_SUBDIRS += fs/yaffs2
 410 TAG_SUBDIRS += net
 411 TAG_SUBDIRS += disk
 412 TAG_SUBDIRS += common
 413 TAG_SUBDIRS += drivers/bios_emulator
 414 TAG_SUBDIRS += drivers/block
 415 TAG_SUBDIRS += drivers/gpio
 416 TAG_SUBDIRS += drivers/hwmon
 417 TAG_SUBDIRS += drivers/i2c
 418 TAG_SUBDIRS += drivers/input
 419 TAG_SUBDIRS += drivers/misc
 420 TAG_SUBDIRS += drivers/mmc
 421 TAG_SUBDIRS += drivers/mtd
 422 TAG_SUBDIRS += drivers/mtd/nand
 423 TAG_SUBDIRS += drivers/mtd/onenand
 424 TAG_SUBDIRS += drivers/mtd/spi
 425 TAG_SUBDIRS += drivers/net
 426 TAG_SUBDIRS += drivers/net/sk98lin
 427 TAG_SUBDIRS += drivers/pci
 428 TAG_SUBDIRS += drivers/pcmcia
 429 TAG_SUBDIRS += drivers/qe
 430 TAG_SUBDIRS += drivers/rtc
 431 TAG_SUBDIRS += drivers/serial
 432 TAG_SUBDIRS += drivers/spi
 433 TAG_SUBDIRS += drivers/usb
 434 TAG_SUBDIRS += drivers/video
 435
 436 tags ctags:
 437                 ctags -w -o $(obj)ctags `find $(SUBDIRS) $(TAG_SUBDIRS) \
 438                                                 -name '*.[ch]' -print`
 439
 440 etags:
 441                 etags -a -o $(obj)etags `find $(SUBDIRS) $(TAG_SUBDIRS) \
 442                                                 -name '*.[ch]' -print`
 443 cscope:
 444                 find $(SUBDIRS) $(TAG_SUBDIRS) -name '*.[ch]' -print \
 445                                                 > cscope.files
 446                 cscope -b -q -k
 447
 448 SYSTEM_MAP = \
 449                 $(NM) $1 | \
 450                 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
 451                 LC_ALL=C sort
 452 $(obj)System.map:       $(obj)u-boot
 453                 @$(call SYSTEM_MAP,$<) > $(obj)System.map
 454
 455 #
 456 # Auto-generate the autoconf.mk file (which is included by all makefiles)
 457 #
 458 # This target actually generates 2 files; autoconf.mk and autoconf.mk.dep.
 459 # the dep file is only include in this top level makefile to determine when
 460 # to regenerate the autoconf.mk file.
 461 $(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h
 462         @$(XECHO) Generating $@ ; \
 463         set -e ; \
 464         : Generate the dependancies ; \
 465         $(CC) -x c -DDO_DEPS_ONLY -M $(HOSTCFLAGS) $(CPPFLAGS) \
 466                 -MQ $(obj)include/autoconf.mk include/common.h > $@
 467
 468 $(obj)include/autoconf.mk: $(obj)include/config.h
 469         @$(XECHO) Generating $@ ; \
 470         set -e ; \
 471         : Extract the config macros ; \
 472         $(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \
 473                 sed -n -f tools/scripts/define2mk.sed > $@.tmp && \
 474         mv $@.tmp $@
 475
 476 #########################################################################
 477 else    # !config.mk
 478 all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \
 479 $(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \
 480 $(SUBDIRS) $(TIMESTAMP_FILE) $(VERSION_FILE) gdbtools updater env depend \
 481 dep tags ctags etags cscope $(obj)System.map:
 482         @echo "System not configured - see README" >&2
 483         @ exit 1
 484 endif   # config.mk
 485
 486 .PHONY : CHANGELOG
 487 CHANGELOG:
 488         git log --no-merges U-Boot-1_1_5.. | \
 489         unexpand -a | sed -e 's/\s\s*$$//' > $@
 490
 491 include/license.h: tools/bin2header COPYING
 492          cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h
 493 #########################################################################
 494
 495 unconfig:
 496         @rm -f $(obj)include/config.h $(obj)include/config.mk \
 497                 $(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \
 498                 $(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep
 499
 500 #========================================================================
 501 # PowerPC
 502 #========================================================================
 503
 504 #########################################################################
 505 ## MPC5xx Systems
 506 #########################################################################
 507
 508 canmb_config:   unconfig
 509         @$(MKCONFIG) -a canmb ppc mpc5xxx canmb
 510
 511 cmi_mpc5xx_config:      unconfig
 512         @$(MKCONFIG) $(@:_config=) ppc mpc5xx cmi
 513
 514 PATI_config:            unconfig
 515         @$(MKCONFIG) $(@:_config=) ppc mpc5xx pati mpl
 516
 517 #########################################################################
 518 ## MPC5xxx Systems
 519 #########################################################################
 520
 521 aev_config: unconfig
 522         @$(MKCONFIG) -a aev ppc mpc5xxx tqm5200 tqc
 523
 524 BC3450_config:  unconfig
 525         @$(MKCONFIG) -a BC3450 ppc mpc5xxx bc3450
 526
 527 cm5200_config:  unconfig
 528         @$(MKCONFIG) -a cm5200 ppc mpc5xxx cm5200
 529
 530 cpci5200_config:  unconfig
 531         @$(MKCONFIG) -a cpci5200  ppc mpc5xxx cpci5200 esd
 532
 533 digsy_mtc_config \
 534 digsy_mtc_LOWBOOT_config        \
 535 digsy_mtc_RAMBOOT_config:       unconfig
 536         @mkdir -p $(obj)include
 537         @mkdir -p $(obj)board/digsy_mtc
 538         @ >$(obj)include/config.h
 539         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 540                 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp ; \
 541                   echo "... with LOWBOOT configuration" ; \
 542                 }
 543         @[ -z "$(findstring RAMBOOT_,$@)" ] || \
 544                 { echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp ; \
 545                   echo "... with RAMBOOT configuration" ; \
 546                 }
 547         @$(MKCONFIG) -a digsy_mtc  ppc mpc5xxx digsy_mtc
 548
 549 galaxy5200_LOWBOOT_config \
 550 galaxy5200_config:      unconfig
 551         @mkdir -p $(obj)include
 552         @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
 553         @$(MKCONFIG) -a galaxy5200 ppc mpc5xxx galaxy5200
 554
 555 hmi1001_config: unconfig
 556         @$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001
 557
 558 Lite5200_config                         \
 559 Lite5200_LOWBOOT_config                 \
 560 Lite5200_LOWBOOT08_config               \
 561 icecube_5200_config                     \
 562 icecube_5200_LOWBOOT_config             \
 563 icecube_5200_LOWBOOT08_config           \
 564 icecube_5200_DDR_config                 \
 565 icecube_5200_DDR_LOWBOOT_config         \
 566 icecube_5200_DDR_LOWBOOT08_config       \
 567 icecube_5100_config:                    unconfig
 568         @mkdir -p $(obj)include
 569         @mkdir -p $(obj)board/icecube
 570         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 571                 { if [ "$(findstring DDR,$@)" ] ; \
 572                         then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
 573                         else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
 574                   fi ; \
 575                   $(XECHO) "... with LOWBOOT configuration" ; \
 576                 }
 577         @[ -z "$(findstring LOWBOOT08,$@)" ] || \
 578                 { echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
 579                   echo "... with 8 MB flash only" ; \
 580                   $(XECHO) "... with LOWBOOT configuration" ; \
 581                 }
 582         @[ -z "$(findstring DDR,$@)" ] || \
 583                 { echo "#define CONFIG_MPC5200_DDR"     >>$(obj)include/config.h ; \
 584                   $(XECHO) "... DDR memory revision" ; \
 585                 }
 586         @[ -z "$(findstring 5200,$@)" ] || \
 587                 { echo "#define CONFIG_MPC5200"         >>$(obj)include/config.h ; \
 588                   $(XECHO) "... with MPC5200 processor" ; \
 589                 }
 590         @[ -z "$(findstring 5100,$@)" ] || \
 591                 { echo "#define CONFIG_MGT5100"         >>$(obj)include/config.h ; \
 592                   $(XECHO) "... with MGT5100 processor" ; \
 593                 }
 594         @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
 595
 596 jupiter_config: unconfig
 597         @$(MKCONFIG) jupiter ppc mpc5xxx jupiter
 598
 599 inka4x0_config: unconfig
 600         @$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0
 601
 602 lite5200b_config        \
 603 lite5200b_PM_config     \
 604 lite5200b_LOWBOOT_config:       unconfig
 605         @mkdir -p $(obj)include
 606         @mkdir -p $(obj)board/icecube
 607         @ echo "#define CONFIG_MPC5200_DDR"     >>$(obj)include/config.h
 608         @ $(XECHO) "... DDR memory revision"
 609         @ echo "#define CONFIG_MPC5200"         >>$(obj)include/config.h
 610         @ echo "#define CONFIG_LITE5200B"       >>$(obj)include/config.h
 611         @[ -z "$(findstring _PM_,$@)" ] || \
 612                 { echo "#define CONFIG_LITE5200B_PM"    >>$(obj)include/config.h ; \
 613                   $(XECHO) "... with power management (low-power mode) support" ; \
 614                 }
 615         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 616                 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
 617                   $(XECHO) "... with LOWBOOT configuration" ; \
 618                 }
 619         @ $(XECHO) "... with MPC5200B processor"
 620         @$(MKCONFIG) -a IceCube  ppc mpc5xxx icecube
 621
 622 mcc200_config   \
 623 mcc200_SDRAM_config     \
 624 mcc200_highboot_config  \
 625 mcc200_COM12_config     \
 626 mcc200_COM12_SDRAM_config       \
 627 mcc200_COM12_highboot_config    \
 628 mcc200_COM12_highboot_SDRAM_config      \
 629 mcc200_highboot_SDRAM_config    \
 630 prs200_config   \
 631 prs200_DDR_config       \
 632 prs200_highboot_config  \
 633 prs200_highboot_DDR_config:     unconfig
 634         @mkdir -p $(obj)include
 635         @mkdir -p $(obj)board/mcc200
 636         @[ -n "$(findstring highboot,$@)" ] || \
 637                 { $(XECHO) "... with lowboot configuration" ; \
 638                 }
 639         @[ -z "$(findstring highboot,$@)" ] || \
 640                 { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp ; \
 641                   $(XECHO) "... with highboot configuration" ; \
 642                 }
 643         @[ -n "$(findstring _SDRAM,$@)" ] || \
 644                 { if [ -n "$(findstring mcc200,$@)" ]; \
 645                   then \
 646                         $(XECHO) "... with DDR" ; \
 647                   else \
 648                         if [ -n "$(findstring _DDR,$@)" ];\
 649                         then \
 650                                 $(XECHO) "... with DDR" ; \
 651                         else \
 652                                 echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ;\
 653                                 $(XECHO) "... with SDRAM" ; \
 654                         fi; \
 655                   fi; \
 656                 }
 657         @[ -z "$(findstring _SDRAM,$@)" ] || \
 658                 { echo "#define CONFIG_MCC200_SDRAM"    >>$(obj)include/config.h ; \
 659                   $(XECHO) "... with SDRAM" ; \
 660                 }
 661         @[ -z "$(findstring COM12,$@)" ] || \
 662                 { echo "#define CONFIG_CONSOLE_COM12"   >>$(obj)include/config.h ; \
 663                   $(XECHO) "... with console on COM12" ; \
 664                 }
 665         @[ -z "$(findstring prs200,$@)" ] || \
 666                 { echo "#define CONFIG_PRS200"  >>$(obj)include/config.h ;\
 667                 }
 668         @$(MKCONFIG) -n $@ -a mcc200 ppc mpc5xxx mcc200
 669
 670 mecp5200_config:  unconfig
 671         @$(MKCONFIG) mecp5200  ppc mpc5xxx mecp5200 esd
 672
 673 motionpro_config:       unconfig
 674         @$(MKCONFIG) motionpro ppc mpc5xxx motionpro
 675
 676 mucmc52_config:         unconfig
 677         @$(MKCONFIG) mucmc52 ppc mpc5xxx mucmc52
 678
 679 munices_config: unconfig
 680         @$(MKCONFIG) munices ppc mpc5xxx munices
 681
 682 MVBC_P_config: unconfig
 683         @mkdir -p $(obj)include
 684         @mkdir -p $(obj)board/mvbc_p
 685         @ >$(obj)include/config.h
 686         @[ -z "$(findstring MVBC_P,$@)" ] || \
 687         {       echo "#define CONFIG_MVBC_P"    >>$(obj)include/config.h; }
 688         @$(MKCONFIG) -n $@ -a MVBC_P ppc mpc5xxx mvbc_p matrix_vision
 689
 690 o2dnt_config:   unconfig
 691         @$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt
 692
 693 pcm030_config \
 694 pcm030_LOWBOOT_config:  unconfig
 695         @mkdir -p $(obj)include $(obj)board/phytec/pcm030
 696         @ >$(obj)include/config.h
 697         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 698                 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp ; \
 699                   echo "... with LOWBOOT configuration" ; \
 700                 }
 701         @$(MKCONFIG) -a pcm030 ppc mpc5xxx pcm030 phytec
 702
 703 pf5200_config:  unconfig
 704         @$(MKCONFIG) pf5200  ppc mpc5xxx pf5200 esd
 705
 706 PM520_config \
 707 PM520_DDR_config \
 708 PM520_ROMBOOT_config \
 709 PM520_ROMBOOT_DDR_config:       unconfig
 710         @mkdir -p $(obj)include
 711         @[ -z "$(findstring DDR,$@)" ] || \
 712                 { echo "#define CONFIG_MPC5200_DDR"     >>$(obj)include/config.h ; \
 713                   $(XECHO) "... DDR memory revision" ; \
 714                 }
 715         @[ -z "$(findstring ROMBOOT,$@)" ] || \
 716                 { echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
 717                   $(XECHO) "... booting from 8-bit flash" ; \
 718                 }
 719         @$(MKCONFIG) -a PM520 ppc mpc5xxx pm520
 720
 721 smmaco4_config: unconfig
 722         @$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200 tqc
 723
 724 spieval_config: unconfig
 725         @$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200 tqc
 726
 727 TB5200_B_config \
 728 TB5200_config:  unconfig
 729         @mkdir -p $(obj)include
 730         @[ -z "$(findstring _B,$@)" ] || \
 731                 { echo "#define CONFIG_TQM5200_B"       >>$(obj)include/config.h ; \
 732                   $(XECHO) "... with MPC5200B processor" ; \
 733                 }
 734         @$(MKCONFIG) -n $@ -a TB5200 ppc mpc5xxx tqm5200 tqc
 735
 736 MINI5200_config \
 737 EVAL5200_config \
 738 TOP5200_config: unconfig
 739         @mkdir -p $(obj)include
 740         @ echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
 741         @$(MKCONFIG) -n $@ -a TOP5200 ppc mpc5xxx top5200 emk
 742
 743 Total5100_config                \
 744 Total5200_config                \
 745 Total5200_lowboot_config        \
 746 Total5200_Rev2_config           \
 747 Total5200_Rev2_lowboot_config:  unconfig
 748         @mkdir -p $(obj)include
 749         @mkdir -p $(obj)board/total5200
 750         @[ -z "$(findstring 5100,$@)" ] || \
 751                 { echo "#define CONFIG_MGT5100"         >>$(obj)include/config.h ; \
 752                   $(XECHO) "... with MGT5100 processor" ; \
 753                 }
 754         @[ -z "$(findstring 5200,$@)" ] || \
 755                 { echo "#define CONFIG_MPC5200"         >>$(obj)include/config.h ; \
 756                   $(XECHO) "... with MPC5200 processor" ; \
 757                 }
 758         @[ -n "$(findstring Rev,$@)" ] || \
 759                 { echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h ; \
 760                   $(XECHO) "... revision 1 board" ; \
 761                 }
 762         @[ -z "$(findstring Rev2_,$@)" ] || \
 763                 { echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h ; \
 764                   $(XECHO) "... revision 2 board" ; \
 765                 }
 766         @[ -z "$(findstring lowboot_,$@)" ] || \
 767                 { echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp ; \
 768                   $(XECHO) "... with lowboot configuration" ; \
 769                 }
 770         @$(MKCONFIG) -a Total5200 ppc mpc5xxx total5200
 771
 772 cam5200_config \
 773 cam5200_niosflash_config \
 774 fo300_config \
 775 MiniFAP_config \
 776 TQM5200S_config \
 777 TQM5200S_HIGHBOOT_config \
 778 TQM5200_B_config \
 779 TQM5200_B_HIGHBOOT_config \
 780 TQM5200_config  \
 781 TQM5200_STK100_config:  unconfig
 782         @mkdir -p $(obj)include
 783         @mkdir -p $(obj)board/tqc/tqm5200
 784         @[ -z "$(findstring cam5200,$@)" ] || \
 785                 { echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \
 786                   echo "#define CONFIG_TQM5200S"        >>$(obj)include/config.h ; \
 787                   echo "#define CONFIG_TQM5200_B"       >>$(obj)include/config.h ; \
 788                   $(XECHO) "... TQM5200S on Cam5200" ; \
 789                 }
 790         @[ -z "$(findstring niosflash,$@)" ] || \
 791                 { echo "#define CONFIG_CAM5200_NIOSFLASH"       >>$(obj)include/config.h ; \
 792                   $(XECHO) "... with NIOS flash driver" ; \
 793                 }
 794         @[ -z "$(findstring fo300,$@)" ] || \
 795                 { echo "#define CONFIG_FO300"   >>$(obj)include/config.h ; \
 796                   $(XECHO) "... TQM5200 on FO300" ; \
 797                 }
 798         @[ -z "$(findstring MiniFAP,$@)" ] || \
 799                 { echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h ; \
 800                   $(XECHO) "... TQM5200_AC on MiniFAP" ; \
 801                 }
 802         @[ -z "$(findstring STK100,$@)" ] || \
 803                 { echo "#define CONFIG_STK52XX_REV100"  >>$(obj)include/config.h ; \
 804                   $(XECHO) "... on a STK52XX.100 base board" ; \
 805                 }
 806         @[ -z "$(findstring TQM5200_B,$@)" ] || \
 807                 { echo "#define CONFIG_TQM5200_B"       >>$(obj)include/config.h ; \
 808                 }
 809         @[ -z "$(findstring TQM5200S,$@)" ] || \
 810                 { echo "#define CONFIG_TQM5200S"        >>$(obj)include/config.h ; \
 811                   echo "#define CONFIG_TQM5200_B"       >>$(obj)include/config.h ; \
 812                 }
 813         @[ -z "$(findstring HIGHBOOT,$@)" ] || \
 814                 { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \
 815                 }
 816         @$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200 tqc
 817
 818 uc101_config:           unconfig
 819         @$(MKCONFIG) uc101 ppc mpc5xxx uc101
 820
 821 v38b_config: unconfig
 822         @$(MKCONFIG) -a v38b ppc mpc5xxx v38b
 823
 824 #########################################################################
 825 ## MPC512x Systems
 826 #########################################################################
 827
 828 aria_config:    unconfig
 829         @$(MKCONFIG) -a aria ppc mpc512x aria davedenx
 830
 831 mecp5123_config:        unconfig
 832         @$(MKCONFIG) -a mecp5123 ppc mpc512x mecp5123 esd
 833
 834 mpc5121ads_config \
 835 mpc5121ads_rev2_config  \
 836         : unconfig
 837         @mkdir -p $(obj)include
 838         @if [ "$(findstring rev2,$@)" ] ; then \
 839                 echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \
 840         fi
 841         @$(MKCONFIG) -a mpc5121ads ppc mpc512x mpc5121ads freescale
 842
 843 #########################################################################
 844 ## MPC8xx Systems
 845 #########################################################################
 846
 847 Adder_config    \
 848 Adder87x_config \
 849 AdderII_config  \
 850         :               unconfig
 851         @mkdir -p $(obj)include
 852         $(if $(findstring AdderII,$@), \
 853         @echo "#define CONFIG_MPC852T" > $(obj)include/config.h)
 854         @$(MKCONFIG) -a Adder ppc mpc8xx adder
 855
 856 AdderUSB_config:        unconfig
 857         @$(MKCONFIG) -a AdderUSB ppc mpc8xx adder
 858
 859 ADS860_config     \
 860 FADS823_config    \
 861 FADS850SAR_config \
 862 MPC86xADS_config  \
 863 MPC885ADS_config  \
 864 FADS860T_config:        unconfig
 865         @$(MKCONFIG) $(@:_config=) ppc mpc8xx fads
 866
 867 AMX860_config   :       unconfig
 868         @$(MKCONFIG) $(@:_config=) ppc mpc8xx amx860 westel
 869
 870 c2mon_config:           unconfig
 871         @$(MKCONFIG) $(@:_config=) ppc mpc8xx c2mon
 872
 873 CCM_config:             unconfig
 874         @$(MKCONFIG) $(@:_config=) ppc mpc8xx CCM siemens
 875
 876 cogent_mpc8xx_config:   unconfig
 877         @$(MKCONFIG) $(@:_config=) ppc mpc8xx cogent
 878
 879 ELPT860_config:         unconfig
 880         @$(MKCONFIG) $(@:_config=) ppc mpc8xx elpt860 LEOX
 881
 882 EP88x_config:           unconfig
 883         @$(MKCONFIG) $(@:_config=) ppc mpc8xx ep88x
 884
 885 ESTEEM192E_config:      unconfig
 886         @$(MKCONFIG) $(@:_config=) ppc mpc8xx esteem192e
 887
 888 ETX094_config   :       unconfig
 889         @$(MKCONFIG) $(@:_config=) ppc mpc8xx etx094
 890
 891 FLAGADM_config: unconfig
 892         @$(MKCONFIG) $(@:_config=) ppc mpc8xx flagadm
 893
 894 xtract_GEN860T = $(subst _SC,,$(subst _config,,$1))
 895
 896 GEN860T_SC_config       \
 897 GEN860T_config: unconfig
 898         @mkdir -p $(obj)include
 899         @[ -z "$(findstring _SC,$@)" ] || \
 900                 { echo "#define CONFIG_SC" >>$(obj)include/config.h ; \
 901                   $(XECHO) "With reduced H/W feature set (SC)..." ; \
 902                 }
 903         @$(MKCONFIG) -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t
 904
 905 GENIETV_config: unconfig
 906         @$(MKCONFIG) $(@:_config=) ppc mpc8xx genietv
 907
 908 GTH_config:     unconfig
 909         @$(MKCONFIG) $(@:_config=) ppc mpc8xx gth
 910
 911 hermes_config   :       unconfig
 912         @$(MKCONFIG) $(@:_config=) ppc mpc8xx hermes
 913
 914 HMI10_config    :       unconfig
 915         @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc
 916
 917 IAD210_config: unconfig
 918         @$(MKCONFIG) $(@:_config=) ppc mpc8xx IAD210 siemens
 919
 920 xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1))
 921
 922 ICU862_100MHz_config    \
 923 ICU862_config: unconfig
 924         @mkdir -p $(obj)include
 925         @[ -z "$(findstring _100MHz,$@)" ] || \
 926                 { echo "#define CONFIG_100MHz"  >>$(obj)include/config.h ; \
 927                   $(XECHO) "... with 100MHz system clock" ; \
 928                 }
 929         @$(MKCONFIG) -a $(call xtract_ICU862,$@) ppc mpc8xx icu862
 930
 931 IP860_config    :       unconfig
 932         @$(MKCONFIG) $(@:_config=) ppc mpc8xx ip860
 933
 934 IVML24_256_config \
 935 IVML24_128_config \
 936 IVML24_config:  unconfig
 937         @mkdir -p $(obj)include
 938         @[ -z "$(findstring IVML24_config,$@)" ] || \
 939                  { echo "#define CONFIG_IVML24_16M"     >>$(obj)include/config.h ; \
 940                  }
 941         @[ -z "$(findstring IVML24_128_config,$@)" ] || \
 942                  { echo "#define CONFIG_IVML24_32M"     >>$(obj)include/config.h ; \
 943                  }
 944         @[ -z "$(findstring IVML24_256_config,$@)" ] || \
 945                  { echo "#define CONFIG_IVML24_64M"     >>$(obj)include/config.h ; \
 946                  }
 947         @$(MKCONFIG) -a IVML24 ppc mpc8xx ivm
 948
 949 IVMS8_256_config \
 950 IVMS8_128_config \
 951 IVMS8_config:   unconfig
 952         @mkdir -p $(obj)include
 953         @[ -z "$(findstring IVMS8_config,$@)" ] || \
 954                  { echo "#define CONFIG_IVMS8_16M"      >>$(obj)include/config.h ; \
 955                  }
 956         @[ -z "$(findstring IVMS8_128_config,$@)" ] || \
 957                  { echo "#define CONFIG_IVMS8_32M"      >>$(obj)include/config.h ; \
 958                  }
 959         @[ -z "$(findstring IVMS8_256_config,$@)" ] || \
 960                  { echo "#define CONFIG_IVMS8_64M"      >>$(obj)include/config.h ; \
 961                  }
 962         @$(MKCONFIG) -a IVMS8 ppc mpc8xx ivm
 963
 964 kmsupx4_config:         unconfig
 965         @$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile
 966
 967 KUP4K_config    :       unconfig
 968         @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4k kup
 969
 970 KUP4X_config    :       unconfig
 971         @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4x kup
 972
 973 LANTEC_config   :       unconfig
 974         @$(MKCONFIG) $(@:_config=) ppc mpc8xx lantec
 975
 976 lwmon_config:           unconfig
 977         @$(MKCONFIG) $(@:_config=) ppc mpc8xx lwmon
 978
 979 MBX_config      \
 980 MBX860T_config: unconfig
 981         @$(MKCONFIG) $(@:_config=) ppc mpc8xx mbx8xx
 982
 983 mgsuvd_config:          unconfig
 984         @$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile
 985
 986 MHPC_config:            unconfig
 987         @$(MKCONFIG) $(@:_config=) ppc mpc8xx mhpc eltec
 988
 989 xtract_NETVIA = $(subst _V2,,$(subst _config,,$1))
 990
 991 NETVIA_V2_config \
 992 NETVIA_config:          unconfig
 993         @mkdir -p $(obj)include
 994         @[ -z "$(findstring NETVIA_config,$@)" ] || \
 995                  { echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h ; \
 996                   $(XECHO) "... Version 1" ; \
 997                  }
 998         @[ -z "$(findstring NETVIA_V2_config,$@)" ] || \
 999                  { echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h ; \
1000                   $(XECHO) "... Version 2" ; \
1001                  }
1002         @$(MKCONFIG) -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia
1003
1004 xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1))
1005
1006 NETPHONE_V2_config \
1007 NETPHONE_config:        unconfig
1008         @mkdir -p $(obj)include
1009         @[ -z "$(findstring NETPHONE_config,$@)" ] || \
1010                  { echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h ; \
1011                  }
1012         @[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \
1013                  { echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h ; \
1014                  }
1015         @$(MKCONFIG) -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone
1016
1017 xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1))))
1018
1019 NETTA_ISDN_6412_SWAPHOOK_config \
1020 NETTA_ISDN_SWAPHOOK_config \
1021 NETTA_6412_SWAPHOOK_config \
1022 NETTA_SWAPHOOK_config \
1023 NETTA_ISDN_6412_config \
1024 NETTA_ISDN_config \
1025 NETTA_6412_config \
1026 NETTA_config:           unconfig
1027         @mkdir -p $(obj)include
1028         @[ -z "$(findstring ISDN_,$@)" ] || \
1029                  { echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h ; \
1030                  }
1031         @[ -n "$(findstring ISDN_,$@)" ] || \
1032                  { echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h ; \
1033                  }
1034         @[ -z "$(findstring 6412_,$@)" ] || \
1035                  { echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h ; \
1036                  }
1037         @[ -n "$(findstring 6412_,$@)" ] || \
1038                  { echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h ; \
1039                  }
1040         @[ -z "$(findstring SWAPHOOK_,$@)" ] || \
1041                  { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h ; \
1042                  }
1043         @[ -n "$(findstring SWAPHOOK_,$@)" ] || \
1044                  { echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h ; \
1045                  }
1046         @$(MKCONFIG) -a $(call xtract_NETTA,$@) ppc mpc8xx netta
1047
1048 xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1))
1049
1050 NETTA2_V2_config \
1051 NETTA2_config:          unconfig
1052         @mkdir -p $(obj)include
1053         @[ -z "$(findstring NETTA2_config,$@)" ] || \
1054                  { echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h ; \
1055                  }
1056         @[ -z "$(findstring NETTA2_V2_config,$@)" ] || \
1057                  { echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h ; \
1058                  }
1059         @$(MKCONFIG) -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2
1060
1061 NC650_Rev1_config \
1062 NC650_Rev2_config \
1063 CP850_config:   unconfig
1064         @mkdir -p $(obj)include
1065         @[ -z "$(findstring CP850,$@)" ] || \
1066                  { echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \
1067                    echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
1068                  }
1069         @[ -z "$(findstring Rev1,$@)" ] || \
1070                  { echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \
1071                  }
1072         @[ -z "$(findstring Rev2,$@)" ] || \
1073                  { echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
1074                  }
1075         @$(MKCONFIG) -a NC650 ppc mpc8xx nc650
1076
1077 NX823_config:           unconfig
1078         @$(MKCONFIG) $(@:_config=) ppc mpc8xx nx823
1079
1080 pcu_e_config:           unconfig
1081         @$(MKCONFIG) $(@:_config=) ppc mpc8xx pcu_e siemens
1082
1083 QS850_config:   unconfig
1084         @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc
1085
1086 QS823_config:   unconfig
1087         @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc
1088
1089 QS860T_config:  unconfig
1090         @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs860t snmc
1091
1092 quantum_config: unconfig
1093         @$(MKCONFIG) $(@:_config=) ppc mpc8xx quantum
1094
1095 R360MPI_config: unconfig
1096         @$(MKCONFIG) $(@:_config=) ppc mpc8xx r360mpi
1097
1098 RBC823_config:  unconfig
1099         @$(MKCONFIG) $(@:_config=) ppc mpc8xx rbc823
1100
1101 RPXClassic_config:      unconfig
1102         @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXClassic
1103
1104 RPXlite_config:         unconfig
1105         @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXlite
1106
1107 RPXlite_DW_64_config            \
1108 RPXlite_DW_LCD_config           \
1109 RPXlite_DW_64_LCD_config        \
1110 RPXlite_DW_NVRAM_config         \
1111 RPXlite_DW_NVRAM_64_config      \
1112 RPXlite_DW_NVRAM_LCD_config     \
1113 RPXlite_DW_NVRAM_64_LCD_config  \
1114 RPXlite_DW_config:      unconfig
1115         @mkdir -p $(obj)include
1116         @[ -z "$(findstring _64,$@)" ] || \
1117                 { echo "#define RPXlite_64MHz"          >>$(obj)include/config.h ; \
1118                   $(XECHO) "... with 64MHz system clock ..."; \
1119                 }
1120         @[ -z "$(findstring _LCD,$@)" ] || \
1121                 { echo "#define CONFIG_LCD"             >>$(obj)include/config.h ; \
1122                   echo "#define CONFIG_NEC_NL6448BC20"  >>$(obj)include/config.h ; \
1123                   $(XECHO) "... with LCD display ..."; \
1124                 }
1125         @[ -z "$(findstring _NVRAM,$@)" ] || \
1126                 { echo "#define  CONFIG_ENV_IS_IN_NVRAM"        >>$(obj)include/config.h ; \
1127                   $(XECHO) "... with ENV in NVRAM ..."; \
1128                 }
1129         @$(MKCONFIG) -a RPXlite_DW ppc mpc8xx RPXlite_dw
1130
1131 rmu_config:     unconfig
1132         @$(MKCONFIG) $(@:_config=) ppc mpc8xx rmu
1133
1134 RRvision_config:        unconfig
1135         @$(MKCONFIG) $(@:_config=) ppc mpc8xx RRvision
1136
1137 RRvision_LCD_config:    unconfig
1138         @mkdir -p $(obj)include
1139         @echo "#define CONFIG_LCD" >$(obj)include/config.h
1140         @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
1141         @$(MKCONFIG) -a RRvision ppc mpc8xx RRvision
1142
1143 SM850_config    :       unconfig
1144         @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc
1145
1146 spc1920_config:         unconfig
1147         @$(MKCONFIG) $(@:_config=) ppc mpc8xx spc1920
1148
1149 SPD823TS_config:        unconfig
1150         @$(MKCONFIG) $(@:_config=) ppc mpc8xx spd8xx
1151
1152 stxxtc_config:  unconfig
1153         @$(MKCONFIG) $(@:_config=) ppc mpc8xx stxxtc stx
1154
1155 svm_sc8xx_config:       unconfig
1156         @$(MKCONFIG) $(@:_config=) ppc mpc8xx svm_sc8xx
1157
1158 SXNI855T_config:        unconfig
1159         @$(MKCONFIG) $(@:_config=) ppc mpc8xx sixnet
1160
1161 # EMK MPC8xx based modules
1162 TOP860_config:          unconfig
1163         @$(MKCONFIG) $(@:_config=) ppc mpc8xx top860 emk
1164
1165 # Play some tricks for configuration selection
1166 # Only 855 and 860 boards may come with FEC
1167 # and only 823 boards may have LCD support
1168 xtract_8xx = $(subst _LCD,,$(subst _config,,$1))
1169
1170 FPS850L_config          \
1171 FPS860L_config          \
1172 NSCU_config             \
1173 TQM823L_config          \
1174 TQM823L_LCD_config      \
1175 TQM850L_config          \
1176 TQM855L_config          \
1177 TQM860L_config          \
1178 TQM862L_config          \
1179 TQM823M_config          \
1180 TQM850M_config          \
1181 TQM855M_config          \
1182 TQM860M_config          \
1183 TQM862M_config          \
1184 TQM866M_config          \
1185 TQM885D_config          \
1186 TK885D_config           \
1187 virtlab2_config:        unconfig
1188         @mkdir -p $(obj)include
1189         @[ -z "$(findstring _LCD,$@)" ] || \
1190                 { echo "#define CONFIG_LCD"             >>$(obj)include/config.h ; \
1191                   echo "#define CONFIG_NEC_NL6448BC20"  >>$(obj)include/config.h ; \
1192                   $(XECHO) "... with LCD display" ; \
1193                 }
1194         @$(MKCONFIG) -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx tqc
1195
1196 TTTech_config:  unconfig
1197         @mkdir -p $(obj)include
1198         @echo "#define CONFIG_LCD" >$(obj)include/config.h
1199         @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
1200         @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc
1201
1202 uc100_config    :       unconfig
1203         @$(MKCONFIG) $(@:_config=) ppc mpc8xx uc100
1204
1205 v37_config:     unconfig
1206         @mkdir -p $(obj)include
1207         @echo "#define CONFIG_LCD" >$(obj)include/config.h
1208         @echo "#define CONFIG_SHARP_LQ084V1DG21" >>$(obj)include/config.h
1209         @$(MKCONFIG) $(@:_config=) ppc mpc8xx v37
1210
1211 wtk_config:     unconfig
1212         @mkdir -p $(obj)include
1213         @echo "#define CONFIG_LCD" >$(obj)include/config.h
1214         @echo "#define CONFIG_SHARP_LQ065T9DR51U" >>$(obj)include/config.h
1215         @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc
1216
1217 #########################################################################
1218 ## PPC4xx Systems
1219 #########################################################################
1220 xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1))))))
1221
1222 acadia_config:  unconfig
1223         @$(MKCONFIG) $(@:_config=) ppc ppc4xx acadia amcc
1224
1225 acadia_nand_config:     unconfig
1226         @mkdir -p $(obj)include $(obj)board/amcc/acadia
1227         @mkdir -p $(obj)nand_spl/board/amcc/acadia
1228         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1229         @$(MKCONFIG) -n $@ -a acadia ppc ppc4xx acadia amcc
1230         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp
1231         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1232
1233 ADCIOP_config:  unconfig
1234         @$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd
1235
1236 alpr_config:    unconfig
1237         @$(MKCONFIG) $(@:_config=) ppc ppc4xx alpr prodrive
1238
1239 AP1000_config:unconfig
1240         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix
1241
1242 APC405_config:  unconfig
1243         @$(MKCONFIG) $(@:_config=) ppc ppc4xx apc405 esd
1244
1245 AR405_config:   unconfig
1246         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ar405 esd
1247
1248 ASH405_config:  unconfig
1249         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ash405 esd
1250
1251 bamboo_config:  unconfig
1252         @$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amcc
1253
1254 bamboo_nand_config:     unconfig
1255         @mkdir -p $(obj)include $(obj)board/amcc/bamboo
1256         @mkdir -p $(obj)nand_spl/board/amcc/bamboo
1257         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1258         @$(MKCONFIG) -n $@ -a bamboo ppc ppc4xx bamboo amcc
1259         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp
1260         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1261
1262 bubinga_config: unconfig
1263         @$(MKCONFIG) $(@:_config=) ppc ppc4xx bubinga amcc
1264
1265 CANBT_config:   unconfig
1266         @$(MKCONFIG) $(@:_config=) ppc ppc4xx canbt esd
1267
1268 # Arches, Canyonlands & Glacier use different U-Boot images
1269 arches_config \
1270 canyonlands_config \
1271 glacier_config: unconfig
1272         @mkdir -p $(obj)include
1273         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1274                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1275         @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc
1276
1277 canyonlands_nand_config \
1278 glacier_nand_config:    unconfig
1279         @mkdir -p $(obj)include $(obj)board/amcc/canyonlands
1280         @mkdir -p $(obj)nand_spl/board/amcc/canyonlands
1281         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1282         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_nand_config=)) | \
1283                 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
1284         @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc
1285         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp
1286         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1287
1288 CATcenter_config        \
1289 CATcenter_25_config     \
1290 CATcenter_33_config:    unconfig
1291         @mkdir -p $(obj)include
1292         @ echo "/* CATcenter uses PPChameleon Model ME */"  > $(obj)include/config.h
1293         @ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h
1294         @[ -z "$(findstring _25,$@)" ] || \
1295                 { echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h ; \
1296                   $(XECHO) "SysClk = 25MHz" ; \
1297                 }
1298         @[ -z "$(findstring _33,$@)" ] || \
1299                 { echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h ; \
1300                   $(XECHO) "SysClk = 33MHz" ; \
1301                 }
1302         @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
1303
1304 CMS700_config:  unconfig
1305         @$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd
1306
1307 # Compact-Center & DevCon-Center use different U-Boot images
1308 compactcenter_config \
1309 devconcenter_config:    unconfig
1310         @mkdir -p $(obj)include
1311         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1312                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1313         @$(MKCONFIG) -n $@ -a compactcenter ppc ppc4xx compactcenter gdsys
1314
1315 CPCI2DP_config: unconfig
1316         @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd
1317
1318 CPCI405_config          \
1319 CPCI4052_config         \
1320 CPCI405DT_config        \
1321 CPCI405AB_config:       unconfig
1322         @mkdir -p $(obj)board/esd/cpci405
1323         @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
1324
1325 CPCIISER4_config:       unconfig
1326         @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpciiser4 esd
1327
1328 CRAYL1_config:  unconfig
1329         @$(MKCONFIG) $(@:_config=) ppc ppc4xx L1 cray
1330
1331 csb272_config:  unconfig
1332         @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb272
1333
1334 csb472_config:  unconfig
1335         @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb472
1336
1337 DASA_SIM_config: unconfig
1338         @$(MKCONFIG) $(@:_config=) ppc ppc4xx dasa_sim esd
1339
1340 dlvision_config: unconfig
1341         @$(MKCONFIG) $(@:_config=) ppc ppc4xx dlvision gdsys
1342
1343 DP405_config:   unconfig
1344         @$(MKCONFIG) $(@:_config=) ppc ppc4xx dp405 esd
1345
1346 DU405_config:   unconfig
1347         @$(MKCONFIG) $(@:_config=) ppc ppc4xx du405 esd
1348
1349 DU440_config:   unconfig
1350         @$(MKCONFIG) $(@:_config=) ppc ppc4xx du440 esd
1351
1352 ebony_config:   unconfig
1353         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ebony amcc
1354
1355 ERIC_config:    unconfig
1356         @$(MKCONFIG) $(@:_config=) ppc ppc4xx eric
1357
1358 EXBITGEN_config:        unconfig
1359         @$(MKCONFIG) $(@:_config=) ppc ppc4xx exbitgen
1360
1361 fx12mm_flash_config: unconfig
1362         @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
1363         @mkdir -p $(obj)include $(obj)board/avnet/fx12mm
1364         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
1365                 > $(obj)board/avnet/fx12mm/config.tmp
1366         @echo "TEXT_BASE := 0xFFCB0000" \
1367                 >> $(obj)board/avnet/fx12mm/config.tmp
1368         @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet
1369
1370 fx12mm_config: unconfig
1371         @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
1372         @mkdir -p $(obj)include $(obj)board/avnet/fx12mm
1373         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\
1374                 > $(obj)board/avnet/fx12mm/config.tmp
1375         @echo "TEXT_BASE := 0x03000000" \
1376                 >> $(obj)board/avnet/fx12mm/config.tmp
1377         @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet
1378
1379 G2000_config:   unconfig
1380         @$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000
1381
1382 gdppc440etx_config:     unconfig
1383         @$(MKCONFIG) $(@:_config=) ppc ppc4xx gdppc440etx gdsys
1384
1385 hcu4_config:    unconfig
1386         @mkdir -p $(obj)board/netstal/common
1387         @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu4 netstal
1388
1389 hcu5_config:    unconfig
1390         @mkdir -p $(obj)board/netstal/common
1391         @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu5 netstal
1392
1393 HH405_config:   unconfig
1394         @$(MKCONFIG) $(@:_config=) ppc ppc4xx hh405 esd
1395
1396 HUB405_config:  unconfig
1397         @$(MKCONFIG) $(@:_config=) ppc ppc4xx hub405 esd
1398
1399 JSE_config:     unconfig
1400         @$(MKCONFIG) $(@:_config=) ppc ppc4xx jse
1401
1402 KAREF_config: unconfig
1403         @$(MKCONFIG) $(@:_config=) ppc ppc4xx karef sandburst
1404
1405 katmai_config:  unconfig
1406         @$(MKCONFIG) $(@:_config=) ppc ppc4xx katmai amcc
1407
1408 # Kilauea & Haleakala images are identical (recognized via PVR)
1409 kilauea_config \
1410 haleakala_config: unconfig
1411         @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc
1412
1413 kilauea_nand_config \
1414 haleakala_nand_config: unconfig
1415         @mkdir -p $(obj)include $(obj)board/amcc/kilauea
1416         @mkdir -p $(obj)nand_spl/board/amcc/kilauea
1417         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1418         @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc
1419         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp
1420         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1421
1422 korat_config:   unconfig
1423         @$(MKCONFIG) $(@:_config=) ppc ppc4xx korat
1424
1425 luan_config:    unconfig
1426         @$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc
1427
1428 lwmon5_config:  unconfig
1429         @$(MKCONFIG) $(@:_config=) ppc ppc4xx lwmon5
1430
1431 makalu_config:  unconfig
1432         @$(MKCONFIG) $(@:_config=) ppc ppc4xx makalu amcc
1433
1434 mcu25_config:  unconfig
1435         @mkdir -p $(obj)board/netstal/common
1436         @$(MKCONFIG) $(@:_config=) ppc ppc4xx mcu25 netstal
1437
1438 METROBOX_config: unconfig
1439         @$(MKCONFIG) $(@:_config=) ppc ppc4xx metrobox sandburst
1440
1441 MIP405_config:  unconfig
1442         @$(MKCONFIG) $(@:_config=) ppc ppc4xx mip405 mpl
1443
1444 MIP405T_config: unconfig
1445         @mkdir -p $(obj)include
1446         @echo "#define CONFIG_MIP405T" >$(obj)include/config.h
1447         @$(XECHO) "Enable subset config for MIP405T"
1448         @$(MKCONFIG) -a MIP405 ppc ppc4xx mip405 mpl
1449
1450 ML2_config:     unconfig
1451         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml2
1452
1453 ml300_config:   unconfig
1454         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml300 xilinx
1455
1456 ml507_flash_config: unconfig
1457         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1458         @mkdir -p $(obj)include $(obj)board/xilinx/ml507
1459         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
1460                 > $(obj)board/xilinx/ml507/config.tmp
1461         @echo "TEXT_BASE := 0xFE360000" \
1462                 >> $(obj)board/xilinx/ml507/config.tmp
1463         @$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx
1464
1465 ml507_config: unconfig
1466         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1467         @mkdir -p $(obj)include $(obj)board/xilinx/ml507
1468         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
1469                 > $(obj)board/xilinx/ml507/config.tmp
1470         @echo "TEXT_BASE := 0x04000000"  \
1471                 >> $(obj)board/xilinx/ml507/config.tmp
1472         @$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx
1473
1474 neo_config:     unconfig
1475         @$(MKCONFIG) $(@:_config=) ppc ppc4xx neo gdsys
1476
1477 ocotea_config:  unconfig
1478         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocotea amcc
1479
1480 OCRTC_config            \
1481 ORSG_config:    unconfig
1482         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocrtc esd
1483
1484 p3p440_config:  unconfig
1485         @$(MKCONFIG) $(@:_config=) ppc ppc4xx p3p440 prodrive
1486
1487 PCI405_config:  unconfig
1488         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pci405 esd
1489
1490 pcs440ep_config:        unconfig
1491         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pcs440ep
1492
1493 PIP405_config:  unconfig
1494         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pip405 mpl
1495
1496 PLU405_config:  unconfig
1497         @$(MKCONFIG) $(@:_config=) ppc ppc4xx plu405 esd
1498
1499 PMC405_config:  unconfig
1500         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405 esd
1501
1502 PMC405DE_config:        unconfig
1503         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405de esd
1504
1505 PMC440_config:  unconfig
1506         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc440 esd
1507
1508 PPChameleonEVB_config           \
1509 PPChameleonEVB_BA_25_config     \
1510 PPChameleonEVB_ME_25_config     \
1511 PPChameleonEVB_HI_25_config     \
1512 PPChameleonEVB_BA_33_config     \
1513 PPChameleonEVB_ME_33_config     \
1514 PPChameleonEVB_HI_33_config:    unconfig
1515         @mkdir -p $(obj)include
1516         @[ -z "$(findstring EVB_BA,$@)" ] || \
1517                 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h ; \
1518                   $(XECHO) "... BASIC model" ; \
1519                 }
1520         @[ -z "$(findstring EVB_ME,$@)" ] || \
1521                 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h ; \
1522                   $(XECHO) "... MEDIUM model" ; \
1523                 }
1524         @[ -z "$(findstring EVB_HI,$@)" ] || \
1525                 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h ; \
1526                   $(XECHO) "... HIGH-END model" ; \
1527                 }
1528         @[ -z "$(findstring _25,$@)" ] || \
1529                 { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h ; \
1530                   $(XECHO) "SysClk = 25MHz" ; \
1531                 }
1532         @[ -z "$(findstring _33,$@)" ] || \
1533                 { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h ; \
1534                   $(XECHO) "SysClk = 33MHz" ; \
1535                 }
1536         @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
1537
1538 quad100hd_config:       unconfig
1539         @$(MKCONFIG) $(@:_config=) ppc ppc4xx quad100hd
1540
1541 redwood_config: unconfig
1542         @$(MKCONFIG) $(@:_config=) ppc ppc4xx redwood amcc
1543
1544 sbc405_config:  unconfig
1545         @$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405
1546
1547 sc3_config:unconfig
1548         @$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3
1549
1550 sequoia_config \
1551 rainier_config: unconfig
1552         @mkdir -p $(obj)include
1553         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1554                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1555         @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
1556
1557 sequoia_nand_config \
1558 rainier_nand_config: unconfig
1559         @mkdir -p $(obj)include $(obj)board/amcc/sequoia
1560         @mkdir -p $(obj)nand_spl/board/amcc/sequoia
1561         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1562         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1563                 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
1564         @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
1565         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
1566         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1567
1568 sequoia_ramboot_config \
1569 rainier_ramboot_config: unconfig
1570         @mkdir -p $(obj)include $(obj)board/amcc/sequoia
1571         @echo "#define CONFIG_SYS_RAMBOOT" > $(obj)include/config.h
1572         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1573                 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
1574         @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
1575         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
1576         @echo "LDSCRIPT = board/amcc/sequoia/u-boot-ram.lds" >> \
1577                 $(obj)board/amcc/sequoia/config.tmp
1578
1579 taihu_config:   unconfig
1580         @$(MKCONFIG) $(@:_config=) ppc ppc4xx taihu amcc
1581
1582 taishan_config: unconfig
1583         @$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc
1584
1585 v5fx30teval_config: unconfig
1586         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1587         @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
1588         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
1589                 > $(obj)board/avnet/v5fx30teval/config.tmp
1590         @echo "TEXT_BASE := 0x03000000" \
1591                 >> $(obj)board/avnet/v5fx30teval/config.tmp
1592         @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet
1593
1594 v5fx30teval_flash_config: unconfig
1595         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1596         @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
1597         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
1598                 > $(obj)board/avnet/v5fx30teval/config.tmp
1599         @echo "TEXT_BASE := 0xFF1C0000" \
1600                 >> $(obj)board/avnet/v5fx30teval/config.tmp
1601         @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet
1602
1603 VOH405_config:  unconfig
1604         @$(MKCONFIG) $(@:_config=) ppc ppc4xx voh405 esd
1605
1606 VOM405_config:  unconfig
1607         @$(MKCONFIG) $(@:_config=) ppc ppc4xx vom405 esd
1608
1609 W7OLMC_config   \
1610 W7OLMG_config: unconfig
1611         @$(MKCONFIG) $(@:_config=) ppc ppc4xx w7o
1612
1613 # Walnut & Sycamore images are identical (recognized via PVR)
1614 walnut_config \
1615 sycamore_config: unconfig
1616         @$(MKCONFIG) -n $@ -a walnut ppc ppc4xx walnut amcc
1617
1618 WUH405_config:  unconfig
1619         @$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esd
1620
1621 xilinx-ppc405-generic_flash_config: unconfig
1622         @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
1623         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
1624                 > $(obj)board/xilinx/ppc405-generic/config.tmp
1625         @echo "TEXT_BASE := 0xFE360000" \
1626                 >> $(obj)board/xilinx/ppc405-generic/config.tmp
1627         @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx
1628
1629 xilinx-ppc405-generic_config: unconfig
1630         @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
1631         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\
1632                 > $(obj)board/xilinx/ppc405-generic/config.tmp
1633         @echo "TEXT_BASE := 0x04000000" \
1634                 >> $(obj)board/xilinx/ppc405-generic/config.tmp
1635         @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx
1636
1637 xilinx-ppc440-generic_flash_config: unconfig
1638         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1639         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
1640                 > $(obj)board/xilinx/ppc440-generic/config.tmp
1641         @echo "TEXT_BASE := 0xFE360000" \
1642                 >> $(obj)board/xilinx/ppc440-generic/config.tmp
1643         @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx
1644
1645 xilinx-ppc440-generic_config: unconfig
1646         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1647         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
1648                 > $(obj)board/xilinx/ppc440-generic/config.tmp
1649         @echo "TEXT_BASE := 0x04000000" \
1650                 >> $(obj)board/xilinx/ppc440-generic/config.tmp
1651         @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx
1652
1653 XPEDITE1000_config:     unconfig
1654         @$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1000 xes
1655
1656 yosemite_config \
1657 yellowstone_config: unconfig
1658         @mkdir -p $(obj)include
1659         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1660                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1661         @$(MKCONFIG) -n $@ -a yosemite ppc ppc4xx yosemite amcc
1662
1663 yucca_config:   unconfig
1664         @$(MKCONFIG) $(@:_config=) ppc ppc4xx yucca amcc
1665
1666 zeus_config:    unconfig
1667         @$(MKCONFIG) $(@:_config=) ppc ppc4xx zeus
1668
1669 #########################################################################
1670 ## MPC8220 Systems
1671 #########################################################################
1672
1673 Alaska8220_config       \
1674 Yukon8220_config:       unconfig
1675         @$(MKCONFIG) $(@:_config=) ppc mpc8220 alaska
1676
1677 sorcery_config:         unconfig
1678         @$(MKCONFIG) $(@:_config=) ppc mpc8220 sorcery
1679
1680 #########################################################################
1681 ## MPC824x Systems
1682 #########################################################################
1683 xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1))))))
1684
1685 A3000_config: unconfig
1686         @$(MKCONFIG) $(@:_config=) ppc mpc824x a3000
1687
1688 barco_config: unconfig
1689         @$(MKCONFIG) $(@:_config=) ppc mpc824x barco
1690
1691 BMW_config: unconfig
1692         @$(MKCONFIG) $(@:_config=) ppc mpc824x bmw
1693
1694 CPC45_config    \
1695 CPC45_ROMBOOT_config:   unconfig
1696         @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc824x cpc45
1697         @cd $(obj)include ;                             \
1698         if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1699                 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
1700                 $(XECHO) "... booting from 8-bit flash" ; \
1701         else \
1702                 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
1703                 $(XECHO) "... booting from 64-bit flash" ; \
1704         fi; \
1705         echo "export CONFIG_BOOT_ROM" >> config.mk;
1706
1707 CU824_config: unconfig
1708         @$(MKCONFIG) $(@:_config=) ppc mpc824x cu824
1709
1710 debris_config: unconfig
1711         @$(MKCONFIG) $(@:_config=) ppc mpc824x debris etin
1712
1713 eXalion_config: unconfig
1714         @$(MKCONFIG) $(@:_config=) ppc mpc824x eXalion
1715
1716 HIDDEN_DRAGON_config: unconfig
1717         @$(MKCONFIG) $(@:_config=) ppc mpc824x hidden_dragon
1718
1719 kvme080_config: unconfig
1720         @$(MKCONFIG) $(@:_config=) ppc mpc824x kvme080 etin
1721
1722 # HDLAN is broken ATM. Should be fixed as soon as hardware is available and as
1723 # time permits.
1724 #linkstation_HDLAN_config \
1725 # Remove this line when HDLAN is fixed
1726 linkstation_HGLAN_config: unconfig
1727         @mkdir -p $(obj)include
1728         @case $@ in \
1729                 *HGLAN*) echo "#define CONFIG_HGLAN 1" >$(obj)include/config.h; ;; \
1730                 *HDLAN*) echo "#define CONFIG_HLAN 1" >$(obj)include/config.h; ;; \
1731         esac
1732         @$(MKCONFIG) -n $@ -a linkstation ppc mpc824x linkstation
1733
1734 MOUSSE_config: unconfig
1735         @$(MKCONFIG) $(@:_config=) ppc mpc824x mousse
1736
1737 MUSENKI_config: unconfig
1738         @$(MKCONFIG) $(@:_config=) ppc mpc824x musenki
1739
1740 MVBLUE_config:  unconfig
1741         @$(MKCONFIG) $(@:_config=) ppc mpc824x mvblue
1742
1743 OXC_config: unconfig
1744         @$(MKCONFIG) $(@:_config=) ppc mpc824x oxc
1745
1746 PN62_config: unconfig
1747         @$(MKCONFIG) $(@:_config=) ppc mpc824x pn62
1748
1749 Sandpoint8240_config: unconfig
1750         @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint
1751
1752 Sandpoint8245_config: unconfig
1753         @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint
1754
1755 sbc8240_config: unconfig
1756         @$(MKCONFIG) $(@:_config=) ppc mpc824x sbc8240
1757
1758 SL8245_config: unconfig
1759         @$(MKCONFIG) $(@:_config=) ppc mpc824x sl8245
1760
1761 utx8245_config: unconfig
1762         @$(MKCONFIG) $(@:_config=) ppc mpc824x utx8245
1763
1764 #########################################################################
1765 ## MPC8260 Systems
1766 #########################################################################
1767
1768 atc_config:     unconfig
1769         @$(MKCONFIG) $(@:_config=) ppc mpc8260 atc
1770
1771 cogent_mpc8260_config:  unconfig
1772         @$(MKCONFIG) $(@:_config=) ppc mpc8260 cogent
1773
1774 CPU86_config    \
1775 CPU86_ROMBOOT_config: unconfig
1776         @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu86
1777         @cd $(obj)include ;                             \
1778         if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1779                 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
1780                 $(XECHO) "... booting from 8-bit flash" ; \
1781         else \
1782                 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
1783                 $(XECHO) "... booting from 64-bit flash" ; \
1784         fi; \
1785         echo "export CONFIG_BOOT_ROM" >> config.mk;
1786
1787 CPU87_config    \
1788 CPU87_ROMBOOT_config: unconfig
1789         @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu87
1790         @cd $(obj)include ;                             \
1791         if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1792                 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
1793                 $(XECHO) "... booting from 8-bit flash" ; \
1794         else \
1795                 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
1796                 $(XECHO) "... booting from 64-bit flash" ; \
1797         fi; \
1798         echo "export CONFIG_BOOT_ROM" >> config.mk;
1799
1800 ep8248_config   \
1801 ep8248E_config  :       unconfig
1802         @$(MKCONFIG) ep8248 ppc mpc8260 ep8248
1803
1804 ep8260_config:  unconfig
1805         @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep8260
1806
1807 ep82xxm_config: unconfig
1808         @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep82xxm
1809
1810 gw8260_config:  unconfig
1811         @$(MKCONFIG) $(@:_config=) ppc mpc8260 gw8260
1812
1813 hymod_config:   unconfig
1814         @$(MKCONFIG) $(@:_config=) ppc mpc8260 hymod
1815
1816 IDS8247_config: unconfig
1817         @$(MKCONFIG) $(@:_config=) ppc mpc8260 ids8247
1818
1819 IPHASE4539_config:      unconfig
1820         @$(MKCONFIG) $(@:_config=) ppc mpc8260 iphase4539
1821
1822 ISPAN_config            \
1823 ISPAN_REVB_config:      unconfig
1824         @mkdir -p $(obj)include
1825         @if [ "$(findstring _REVB_,$@)" ] ; then \
1826                 echo "#define CONFIG_SYS_REV_B" > $(obj)include/config.h ; \
1827         fi
1828         @$(MKCONFIG) -a ISPAN ppc mpc8260 ispan
1829
1830 mgcoge_config   :       unconfig
1831         @$(MKCONFIG) mgcoge ppc mpc8260 mgcoge keymile
1832
1833 MPC8260ADS_config       \
1834 MPC8260ADS_lowboot_config       \
1835 MPC8260ADS_33MHz_config \
1836 MPC8260ADS_33MHz_lowboot_config \
1837 MPC8260ADS_40MHz_config \
1838 MPC8260ADS_40MHz_lowboot_config \
1839 MPC8272ADS_config       \
1840 MPC8272ADS_lowboot_config       \
1841 PQ2FADS_config          \
1842 PQ2FADS_lowboot_config          \
1843 PQ2FADS-VR_config       \
1844 PQ2FADS-VR_lowboot_config       \
1845 PQ2FADS-ZU_config       \
1846 PQ2FADS-ZU_lowboot_config       \
1847 PQ2FADS-ZU_66MHz_config \
1848 PQ2FADS-ZU_66MHz_lowboot_config \
1849         :               unconfig
1850         @mkdir -p $(obj)include
1851         @mkdir -p $(obj)board/freescale/mpc8260ads
1852         $(if $(findstring PQ2FADS,$@), \
1853         @echo "#define CONFIG_ADSTYPE CONFIG_SYS_PQ2FADS" > $(obj)include/config.h, \
1854         @echo "#define CONFIG_ADSTYPE CONFIG_SYS_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h)
1855         $(if $(findstring MHz,$@), \
1856         @echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> $(obj)include/config.h, \
1857         $(if $(findstring VR,$@), \
1858         @echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h))
1859         @[ -z "$(findstring lowboot_,$@)" ] || \
1860                 { echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp ; \
1861                   $(XECHO) "... with lowboot configuration" ; \
1862                 }
1863         @$(MKCONFIG) -a MPC8260ADS ppc mpc8260 mpc8260ads freescale
1864
1865 MPC8266ADS_config:      unconfig
1866         @$(MKCONFIG) $(@:_config=) ppc mpc8260 mpc8266ads freescale
1867
1868 muas3001_dev_config \
1869 muas3001_config :       unconfig
1870         @mkdir -p $(obj)include
1871         @mkdir -p $(obj)board/muas3001
1872         @if [ "$(findstring dev,$@)" ] ; then \
1873                 echo "#define CONFIG_MUAS_DEV_BOARD" > $(obj)include/config.h ; \
1874         fi
1875         @$(MKCONFIG) -a muas3001 ppc mpc8260 muas3001
1876
1877 # PM825/PM826 default configuration:  small (= 8 MB) Flash / boot from 64-bit flash
1878 PM825_config    \
1879 PM825_ROMBOOT_config    \
1880 PM825_BIGFLASH_config   \
1881 PM825_ROMBOOT_BIGFLASH_config   \
1882 PM826_config    \
1883 PM826_ROMBOOT_config    \
1884 PM826_BIGFLASH_config   \
1885 PM826_ROMBOOT_BIGFLASH_config:  unconfig
1886         @mkdir -p $(obj)include
1887         @mkdir -p $(obj)board/pm826
1888         @if [ "$(findstring PM825_,$@)" ] ; then \
1889                 echo "#define CONFIG_PCI"       >$(obj)include/config.h ; \
1890         else \
1891                 >$(obj)include/config.h ; \
1892         fi
1893         @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1894                 $(XECHO) "... booting from 8-bit flash" ; \
1895                 echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
1896                 echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
1897                 if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
1898                         $(XECHO) "... with 32 MB Flash" ; \
1899                         echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
1900                 fi; \
1901         else \
1902                 $(XECHO) "... booting from 64-bit flash" ; \
1903                 if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
1904                         $(XECHO) "... with 32 MB Flash" ; \
1905                         echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
1906                         echo "TEXT_BASE = 0x40000000" >$(obj)board/pm826/config.tmp ; \
1907                 else \
1908                         echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \
1909                 fi; \
1910         fi
1911         @$(MKCONFIG) -a PM826 ppc mpc8260 pm826
1912
1913 PM828_config    \
1914 PM828_PCI_config        \
1915 PM828_ROMBOOT_config    \
1916 PM828_ROMBOOT_PCI_config:       unconfig
1917         @mkdir -p $(obj)include
1918         @mkdir -p $(obj)board/pm826
1919         @if [ "$(findstring _PCI_,$@)" ] ; then \
1920                 echo "#define CONFIG_PCI"  >>$(obj)include/config.h ; \
1921                 $(XECHO) "... with PCI enabled" ; \
1922         fi
1923         @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1924                 $(XECHO) "... booting from 8-bit flash" ; \
1925                 echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
1926                 echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
1927         fi
1928         @$(MKCONFIG) -a PM828 ppc mpc8260 pm828
1929
1930 ppmc8260_config:        unconfig
1931         @$(MKCONFIG) $(@:_config=) ppc mpc8260 ppmc8260
1932
1933 Rattler8248_config      \
1934 Rattler_config:         unconfig
1935         @mkdir -p $(obj)include
1936         $(if $(findstring 8248,$@), \
1937         @echo "#define CONFIG_MPC8248" > $(obj)include/config.h)
1938         @$(MKCONFIG) -a Rattler ppc mpc8260 rattler
1939
1940 RPXsuper_config:        unconfig
1941         @$(MKCONFIG) $(@:_config=) ppc mpc8260 rpxsuper
1942
1943 rsdproto_config:        unconfig
1944         @$(MKCONFIG) $(@:_config=) ppc mpc8260 rsdproto
1945
1946 sacsng_config:  unconfig
1947         @$(MKCONFIG) $(@:_config=) ppc mpc8260 sacsng
1948
1949 sbc8260_config: unconfig
1950         @$(MKCONFIG) $(@:_config=) ppc mpc8260 sbc8260
1951
1952 SCM_config:             unconfig
1953         @$(MKCONFIG) $(@:_config=) ppc mpc8260 SCM siemens
1954
1955 TQM8255_AA_config \
1956 TQM8260_AA_config \
1957 TQM8260_AB_config \
1958 TQM8260_AC_config \
1959 TQM8260_AD_config \
1960 TQM8260_AE_config \
1961 TQM8260_AF_config \
1962 TQM8260_AG_config \
1963 TQM8260_AH_config \
1964 TQM8260_AI_config \
1965 TQM8265_AA_config:  unconfig
1966         @mkdir -p $(obj)include
1967         @case "$@" in \
1968         TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no;  BMODE=8260;;  \
1969         TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no;  BMODE=8260;; \
1970         TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;;  \
1971         TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;;  \
1972         TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1973         TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no;  BMODE=8260;; \
1974         TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1975         TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=8260;; \
1976         TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes; BMODE=60x;;  \
1977         TQM8260_AI_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1978         TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1979         esac; \
1980         if [ "$${CTYPE}" != "MPC8260" ] ; then \
1981                 echo "#define CONFIG_$${CTYPE}" >>$(obj)include/config.h ; \
1982         fi; \
1983         echo "#define CONFIG_$${CFREQ}MHz"      >>$(obj)include/config.h ; \
1984         echo "... with $${CFREQ}MHz system clock" ; \
1985         if [ "$${CACHE}" = "yes" ] ; then \
1986                 echo "#define CONFIG_L2_CACHE"  >>$(obj)include/config.h ; \
1987                 $(XECHO) "... with L2 Cache support" ; \
1988         else \
1989                 echo "#undef CONFIG_L2_CACHE"   >>$(obj)include/config.h ; \
1990                 $(XECHO) "... without L2 Cache support" ; \
1991         fi; \
1992         if [ "$${BMODE}" = "60x" ] ; then \
1993                 echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \
1994                 $(XECHO) "... with 60x Bus Mode" ; \
1995         else \
1996                 echo "#undef CONFIG_BUSMODE_60x"  >>$(obj)include/config.h ; \
1997                 $(XECHO) "... without 60x Bus Mode" ; \
1998         fi
1999         @$(MKCONFIG) -a TQM8260 ppc mpc8260 tqm8260 tqc
2000
2001 TQM8272_config: unconfig
2002         @$(MKCONFIG) TQM8272 ppc mpc8260 tqm8272 tqc
2003
2004 VoVPN-GW_66MHz_config   \
2005 VoVPN-GW_100MHz_config:         unconfig
2006         @mkdir -p $(obj)include
2007         @echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h
2008         @$(MKCONFIG) -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk
2009
2010 ZPC1900_config: unconfig
2011         @$(MKCONFIG) $(@:_config=) ppc mpc8260 zpc1900
2012
2013 #########################################################################
2014 ## Coldfire
2015 #########################################################################
2016
2017 M5208EVBE_config :              unconfig
2018         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5208evbe freescale
2019
2020 M52277EVB_config \
2021 M52277EVB_spansion_config \
2022 M52277EVB_stmicro_config :      unconfig
2023         @case "$@" in \
2024         M52277EVB_config)               FLASH=SPANSION;; \
2025         M52277EVB_spansion_config)      FLASH=SPANSION;; \
2026         M52277EVB_stmicro_config)       FLASH=STMICRO;; \
2027         esac; \
2028         if [ "$${FLASH}" = "SPANSION" ] ; then \
2029                 echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \
2030                 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \
2031                 cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \
2032                 $(XECHO) "... with SPANSION boot..." ; \
2033         fi; \
2034         if [ "$${FLASH}" = "STMICRO" ] ; then \
2035                 echo "#define CONFIG_CF_SBF"    >> $(obj)include/config.h ; \
2036                 echo "#define CONFIG_SYS_STMICRO_BOOT"  >> $(obj)include/config.h ; \
2037                 echo "TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \
2038                 cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \
2039                 $(XECHO) "... with ST Micro boot..." ; \
2040         fi
2041         @$(MKCONFIG) -a M52277EVB m68k mcf5227x m52277evb freescale
2042
2043 M5235EVB_config \
2044 M5235EVB_Flash16_config \
2045 M5235EVB_Flash32_config:        unconfig
2046         @case "$@" in \
2047         M5235EVB_config)                FLASH=16;; \
2048         M5235EVB_Flash16_config)        FLASH=16;; \
2049         M5235EVB_Flash32_config)        FLASH=32;; \
2050         esac; \
2051         if [ "$${FLASH}" != "16" ] ; then \
2052                 echo "#define NORFLASH_PS32BIT  1" >> $(obj)include/config.h ; \
2053                 echo "TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
2054                 cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \
2055         else \
2056                 echo "TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
2057                 cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \
2058         fi
2059         @$(MKCONFIG) -a M5235EVB m68k mcf523x m5235evb freescale
2060
2061 M5249EVB_config :               unconfig
2062         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale
2063
2064 M5253DEMO_config :              unconfig
2065         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253demo freescale
2066
2067 M5253EVBE_config :              unconfig
2068         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253evbe freescale
2069
2070 cobra5272_config :              unconfig
2071         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 cobra5272
2072
2073 EB+MCF-EV123_config :           unconfig
2074         @mkdir -p $(obj)include
2075         @mkdir -p $(obj)board/BuS/EB+MCF-EV123
2076         @echo "TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
2077         @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
2078
2079 EB+MCF-EV123_internal_config :  unconfig
2080         @mkdir -p $(obj)include
2081         @mkdir -p $(obj)board/BuS/EB+MCF-EV123
2082         @echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
2083         @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
2084
2085 idmr_config :                   unconfig
2086         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 idmr
2087
2088 M5271EVB_config :               unconfig
2089         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5271evb freescale
2090
2091 M5272C3_config :                unconfig
2092         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5272c3 freescale
2093
2094 M5275EVB_config :               unconfig
2095         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5275evb freescale
2096
2097 M5282EVB_config :               unconfig
2098         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb freescale
2099
2100 M53017EVB_config :              unconfig
2101         @$(MKCONFIG) $(@:_config=) m68k mcf532x m53017evb freescale
2102
2103 M5329AFEE_config \
2104 M5329BFEE_config :      unconfig
2105         @case "$@" in \
2106         M5329AFEE_config)       NAND=0;; \
2107         M5329BFEE_config)       NAND=16;; \
2108         esac; \
2109         if [ "$${NAND}" != "0" ] ; then \
2110                 echo "#define NANDFLASH_SIZE    $${NAND}" > $(obj)include/config.h ; \
2111         fi
2112         @$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale
2113
2114 M5373EVB_config :       unconfig
2115         @case "$@" in \
2116         M5373EVB_config)        NAND=16;; \
2117         esac; \
2118         if [ "$${NAND}" != "0" ] ; then \
2119                 echo "#define NANDFLASH_SIZE    $${NAND}" > $(obj)include/config.h ; \
2120         fi
2121         @$(MKCONFIG) -a M5373EVB m68k mcf532x m5373evb freescale
2122
2123 M54451EVB_config \
2124 M54451EVB_stmicro_config :      unconfig
2125         @case "$@" in \
2126         M54451EVB_config)               FLASH=NOR;; \
2127         M54451EVB_stmicro_config)       FLASH=STMICRO;; \
2128         esac; \
2129         if [ "$${FLASH}" = "NOR" ] ; then \
2130                 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \
2131                 cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \
2132                 $(XECHO) "... with NOR boot..." ; \
2133         fi; \
2134         if [ "$${FLASH}" = "STMICRO" ] ; then \
2135                 echo "#define CONFIG_CF_SBF"    >> $(obj)include/config.h ; \
2136                 echo "#define CONFIG_SYS_STMICRO_BOOT"  >> $(obj)include/config.h ; \
2137                 echo "TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \
2138                 cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \
2139                 $(XECHO) "... with ST Micro boot..." ; \
2140         fi; \
2141         echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ;
2142         @$(MKCONFIG) -a M54451EVB m68k mcf5445x m54451evb freescale
2143
2144 M54455EVB_config \
2145 M54455EVB_atmel_config \
2146 M54455EVB_intel_config \
2147 M54455EVB_a33_config \
2148 M54455EVB_a66_config \
2149 M54455EVB_i33_config \
2150 M54455EVB_i66_config \
2151 M54455EVB_stm33_config :        unconfig
2152         @case "$@" in \
2153         M54455EVB_config)               FLASH=ATMEL; FREQ=33333333;; \
2154         M54455EVB_atmel_config)         FLASH=ATMEL; FREQ=33333333;; \
2155         M54455EVB_intel_config)         FLASH=INTEL; FREQ=33333333;; \
2156         M54455EVB_a33_config)           FLASH=ATMEL; FREQ=33333333;; \
2157         M54455EVB_a66_config)           FLASH=ATMEL; FREQ=66666666;; \
2158         M54455EVB_i33_config)           FLASH=INTEL; FREQ=33333333;; \
2159         M54455EVB_i66_config)           FLASH=INTEL; FREQ=66666666;; \
2160         M54455EVB_stm33_config)         FLASH=STMICRO; FREQ=33333333;; \
2161         esac; \
2162         if [ "$${FLASH}" = "INTEL" ] ; then \
2163                 echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \
2164                 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
2165                 cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \
2166                 $(XECHO) "... with INTEL boot..." ; \
2167         fi; \
2168         if [ "$${FLASH}" = "ATMEL" ] ; then \
2169                 echo "#define CONFIG_SYS_ATMEL_BOOT"    >> $(obj)include/config.h ; \
2170                 echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
2171                 cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \
2172                 $(XECHO) "... with ATMEL boot..." ; \
2173         fi; \
2174         if [ "$${FLASH}" = "STMICRO" ] ; then \
2175                 echo "#define CONFIG_CF_SBF"    >> $(obj)include/config.h ; \
2176                 echo "#define CONFIG_SYS_STMICRO_BOOT"  >> $(obj)include/config.h ; \
2177                 echo "TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \
2178                 cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \
2179                 $(XECHO) "... with ST Micro boot..." ; \
2180         fi; \
2181         echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
2182         $(XECHO) "... with $${FREQ}Hz input clock"
2183         @$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale
2184
2185 M5475AFE_config \
2186 M5475BFE_config \
2187 M5475CFE_config \
2188 M5475DFE_config \
2189 M5475EFE_config \
2190 M5475FFE_config \
2191 M5475GFE_config :       unconfig
2192         @case "$@" in \
2193         M5475AFE_config)        BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
2194         M5475BFE_config)        BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
2195         M5475CFE_config)        BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
2196         M5475DFE_config)        BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
2197         M5475EFE_config)        BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
2198         M5475FFE_config)        BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
2199         M5475GFE_config)        BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
2200         esac; \
2201         echo "#define CONFIG_SYS_BUSCLK 133333333" > $(obj)include/config.h ; \
2202         echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
2203         echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
2204         if [ "$${RAM1}" != "0" ] ; then \
2205                 echo "#define CONFIG_SYS_DRAMSZ1        $${RAM1}" >> $(obj)include/config.h ; \
2206         fi; \
2207         if [ "$${CODE}" != "0" ] ; then \
2208                 echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
2209         fi; \
2210         if [ "$${VID}" == "1" ] ; then \
2211                 echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \
2212         fi; \
2213         if [ "$${USB}" == "1" ] ; then \
2214                 echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
2215         fi
2216         @$(MKCONFIG) -a M5475EVB m68k mcf547x_8x m547xevb freescale
2217
2218 M5485AFE_config \
2219 M5485BFE_config \
2220 M5485CFE_config \
2221 M5485DFE_config \
2222 M5485EFE_config \
2223 M5485FFE_config \
2224 M5485GFE_config \
2225 M5485HFE_config :       unconfig
2226         @case "$@" in \
2227         M5485AFE_config)        BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
2228         M5485BFE_config)        BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
2229         M5485CFE_config)        BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
2230         M5485DFE_config)        BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
2231         M5485EFE_config)        BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
2232         M5485FFE_config)        BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
2233         M5485GFE_config)        BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
2234         M5485HFE_config)        BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \
2235         esac; \
2236         echo "#define CONFIG_SYS_BUSCLK 100000000" > $(obj)include/config.h ; \
2237         echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
2238         echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
2239         if [ "$${RAM1}" != "0" ] ; then \
2240                 echo "#define CONFIG_SYS_DRAMSZ1        $${RAM1}" >> $(obj)include/config.h ; \
2241         fi; \
2242         if [ "$${CODE}" != "0" ] ; then \
2243                 echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
2244         fi; \
2245         if [ "$${VID}" == "1" ] ; then \
2246                 echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \
2247         fi; \
2248         if [ "$${USB}" == "1" ] ; then \
2249                 echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
2250         fi
2251         @$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale
2252
2253 TASREG_config :         unconfig
2254         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd
2255
2256 #########################################################################
2257 ## MPC83xx Systems
2258 #########################################################################
2259
2260 kmeter1_config: unconfig
2261         @$(MKCONFIG) kmeter1 ppc mpc83xx kmeter1 keymile
2262
2263 MPC8313ERDB_33_config \
2264 MPC8313ERDB_66_config \
2265 MPC8313ERDB_NAND_33_config \
2266 MPC8313ERDB_NAND_66_config: unconfig
2267         @mkdir -p $(obj)include
2268         @mkdir -p $(obj)board/freescale/mpc8313erdb
2269         @if [ "$(findstring _33_,$@)" ] ; then \
2270                 $(XECHO) -n "...33M ..." ; \
2271                 echo "#define CONFIG_SYS_33MHZ" >>$(obj)include/config.h ; \
2272         fi ; \
2273         if [ "$(findstring _66_,$@)" ] ; then \
2274                 $(XECHO) -n "...66M..." ; \
2275                 echo "#define CONFIG_SYS_66MHZ" >>$(obj)include/config.h ; \
2276         fi ; \
2277         if [ "$(findstring _NAND_,$@)" ] ; then \
2278                 $(XECHO) -n "...NAND..." ; \
2279                 echo "TEXT_BASE = 0x00100000" > $(obj)board/freescale/mpc8313erdb/config.tmp ; \
2280                 echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \
2281         fi ;
2282         @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb freescale
2283         @if [ "$(findstring _NAND_,$@)" ] ; then \
2284                 echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \
2285         fi ;
2286
2287 MPC8315ERDB_config: unconfig
2288         @$(MKCONFIG) -a MPC8315ERDB ppc mpc83xx mpc8315erdb freescale
2289
2290 MPC8323ERDB_config:     unconfig
2291         @$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale
2292
2293 MPC832XEMDS_config \
2294 MPC832XEMDS_HOST_33_config \
2295 MPC832XEMDS_HOST_66_config \
2296 MPC832XEMDS_SLAVE_config \
2297 MPC832XEMDS_ATM_config: unconfig
2298         @mkdir -p $(obj)include
2299         @if [ "$(findstring _HOST_,$@)" ] ; then \
2300                 $(XECHO) -n "... PCI HOST " ; \
2301                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2302         fi ; \
2303         if [ "$(findstring _SLAVE_,$@)" ] ; then \
2304                 $(XECHO) "...PCI SLAVE 66M"  ; \
2305                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2306                 echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
2307         fi ; \
2308         if [ "$(findstring _33_,$@)" ] ; then \
2309                 $(XECHO) -n "...33M ..." ; \
2310                 echo "#define PCI_33M" >>$(obj)include/config.h ; \
2311                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2312         fi ; \
2313         if [ "$(findstring _66_,$@)" ] ; then \
2314                 $(XECHO) -n "...66M..." ; \
2315                 echo "#define PCI_66M" >>$(obj)include/config.h ; \
2316                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2317         fi ; \
2318         if [ "$(findstring _ATM_,$@)" ] ; then \
2319                 $(XECHO) -n "...ATM..." ; \
2320                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2321                 echo "#define CONFIG_PQ_MDS_PIB_ATM     1" >>$(obj)include/config.h ; \
2322         fi ;
2323         @$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale
2324
2325 MPC8349EMDS_config:     unconfig
2326         @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds freescale
2327
2328 MPC8349ITX_config \
2329 MPC8349ITX_LOWBOOT_config \
2330 MPC8349ITXGP_config:    unconfig
2331         @mkdir -p $(obj)include
2332         @mkdir -p $(obj)board/freescale/mpc8349itx
2333         @echo "#define CONFIG_$(subst _LOWBOOT,,$(@:_config=))" >> $(obj)include/config.h
2334         @if [ "$(findstring GP,$@)" ] ; then \
2335                 echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
2336         fi
2337         @if [ "$(findstring LOWBOOT,$@)" ] ; then \
2338                 echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
2339         fi
2340         @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx freescale
2341
2342 MPC8360EMDS_config \
2343 MPC8360EMDS_HOST_33_config \
2344 MPC8360EMDS_HOST_66_config \
2345 MPC8360EMDS_SLAVE_config \
2346 MPC8360EMDS_ATM_config: unconfig
2347         @mkdir -p $(obj)include
2348         @if [ "$(findstring _HOST_,$@)" ] ; then \
2349                 $(XECHO) -n "... PCI HOST " ; \
2350                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2351         fi ; \
2352         if [ "$(findstring _SLAVE_,$@)" ] ; then \
2353                 $(XECHO) "...PCI SLAVE 66M"  ; \
2354                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2355                 echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
2356         fi ; \
2357         if [ "$(findstring _33_,$@)" ] ; then \
2358                 $(XECHO) -n "...33M ..." ; \
2359                 echo "#define PCI_33M" >>$(obj)include/config.h ; \
2360                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2361         fi ; \
2362         if [ "$(findstring _66_,$@)" ] ; then \
2363                 $(XECHO) -n "...66M..." ; \
2364                 echo "#define PCI_66M" >>$(obj)include/config.h ; \
2365                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2366         fi ; \
2367         if [ "$(findstring _ATM_,$@)" ] ; then \
2368                 $(XECHO) -n "...ATM..." ; \
2369                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2370                 echo "#define CONFIG_PQ_MDS_PIB_ATM     1" >>$(obj)include/config.h ; \
2371         fi ;
2372         @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale
2373
2374 MPC8360ERDK_33_config \
2375 MPC8360ERDK_66_config \
2376 MPC8360ERDK_config:     unconfig
2377         @mkdir -p $(obj)include
2378         @if [ "$(findstring _33_,$@)" ] ; then \
2379                 $(XECHO) -n "... CLKIN 33MHz " ; \
2380                 echo "#define CONFIG_CLKIN_33MHZ" >>$(obj)include/config.h ;\
2381         fi ;
2382         @$(MKCONFIG) -a MPC8360ERDK ppc mpc83xx mpc8360erdk freescale
2383
2384 MPC837XEMDS_config \
2385 MPC837XEMDS_HOST_config:        unconfig
2386         @mkdir -p $(obj)include
2387         @if [ "$(findstring _HOST_,$@)" ] ; then \
2388                 $(XECHO) -n "... PCI HOST " ; \
2389                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2390         fi ;
2391         @$(MKCONFIG) -a MPC837XEMDS ppc mpc83xx mpc837xemds freescale
2392
2393 MPC837XERDB_config:     unconfig
2394         @$(MKCONFIG) -a MPC837XERDB ppc mpc83xx mpc837xerdb freescale
2395
2396 MVBLM7_config: unconfig
2397         @$(MKCONFIG) $(@:_config=) ppc mpc83xx mvblm7 matrix_vision
2398
2399 sbc8349_config \
2400 sbc8349_PCI_33_config \
2401 sbc8349_PCI_66_config: unconfig
2402         @mkdir -p $(obj)include
2403         @if [ "$(findstring _PCI_,$@)" ] ; then \
2404                 $(XECHO) -n "... PCI HOST at " ; \
2405                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2406         fi ; \
2407         if [ "$(findstring _33_,$@)" ] ; then \
2408                 $(XECHO) -n "33MHz... " ; \
2409                 echo "#define PCI_33M" >>$(obj)include/config.h ; \
2410         fi ; \
2411         if [ "$(findstring _66_,$@)" ] ; then \
2412                 $(XECHO) -n "66MHz... " ; \
2413                 echo "#define PCI_66M" >>$(obj)include/config.h ; \
2414         fi ;
2415         @$(MKCONFIG) -a sbc8349 ppc mpc83xx sbc8349
2416
2417 SIMPC8313_LP_config \
2418 SIMPC8313_SP_config: unconfig
2419         @mkdir -p $(obj)include
2420         @mkdir -p $(obj)board/sheldon/simpc8313
2421         @if [ "$(findstring _LP_,$@)" ] ; then \
2422                 $(XECHO) -n "...Large Page NAND..." ; \
2423                 echo "#define CONFIG_NAND_LP" >> $(obj)include/config.h ; \
2424         fi ; \
2425         if [ "$(findstring _SP_,$@)" ] ; then \
2426                 $(XECHO) -n "...Small Page NAND..." ; \
2427                 echo "#define CONFIG_NAND_SP" >> $(obj)include/config.h ; \
2428         fi ;
2429         @$(MKCONFIG) -a SIMPC8313 ppc mpc83xx simpc8313 sheldon
2430         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
2431
2432 TQM834x_config: unconfig
2433         @$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x tqc
2434
2435 vme8349_config:         unconfig
2436         @$(MKCONFIG) $(@:_config=) ppc mpc83xx vme8349 esd
2437
2438 #########################################################################
2439 ## MPC85xx Systems
2440 #########################################################################
2441
2442 ATUM8548_config:        unconfig
2443         @$(MKCONFIG) $(@:_config=) ppc mpc85xx atum8548
2444
2445 MPC8536DS_36BIT_config \
2446 MPC8536DS_config:       unconfig
2447         @mkdir -p $(obj)include
2448         @echo "#define CONFIG_$(@:_config=) 1"  >$(obj)include/config.h
2449         @$(MKCONFIG) -a MPC8536DS ppc mpc85xx mpc8536ds freescale
2450
2451 MPC8540ADS_config:      unconfig
2452         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads freescale
2453
2454 MPC8540EVAL_config \
2455 MPC8540EVAL_33_config \
2456 MPC8540EVAL_66_config \
2457 MPC8540EVAL_33_slave_config \
2458 MPC8540EVAL_66_slave_config:      unconfig
2459         @mkdir -p $(obj)include
2460         @if [ "$(findstring _33_,$@)" ] ; then \
2461                 $(XECHO) "... 33 MHz PCI" ; \
2462         else \
2463                 echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \
2464                 $(XECHO) "... 66 MHz PCI" ; \
2465         fi ; \
2466         if [ "$(findstring _slave_,$@)" ] ; then \
2467                 echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \
2468                 $(XECHO) " slave" ; \
2469         else \
2470                 $(XECHO) " host" ; \
2471         fi
2472         @$(MKCONFIG) -a MPC8540EVAL ppc mpc85xx mpc8540eval
2473
2474 MPC8560ADS_config:      unconfig
2475         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads freescale
2476
2477 MPC8541CDS_legacy_config \
2478 MPC8541CDS_config:      unconfig
2479         @mkdir -p $(obj)include
2480         @if [ "$(findstring _legacy_,$@)" ] ; then \
2481                 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
2482                 $(XECHO) "... legacy" ; \
2483         fi
2484         @$(MKCONFIG) -a MPC8541CDS ppc mpc85xx mpc8541cds freescale
2485
2486 MPC8544DS_config:       unconfig
2487         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8544ds freescale
2488
2489 MPC8548CDS_legacy_config \
2490 MPC8548CDS_config:      unconfig
2491         @mkdir -p $(obj)include
2492         @if [ "$(findstring _legacy_,$@)" ] ; then \
2493                 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
2494                 $(XECHO) "... legacy" ; \
2495         fi
2496         @$(MKCONFIG) -a MPC8548CDS ppc mpc85xx mpc8548cds freescale
2497
2498 MPC8555CDS_legacy_config \
2499 MPC8555CDS_config:      unconfig
2500         @mkdir -p $(obj)include
2501         @if [ "$(findstring _legacy_,$@)" ] ; then \
2502                 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
2503                 $(XECHO) "... legacy" ; \
2504         fi
2505         @$(MKCONFIG) -a MPC8555CDS ppc mpc85xx mpc8555cds freescale
2506
2507 MPC8568MDS_config:      unconfig
2508         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds freescale
2509
2510 MPC8569MDS_config:      unconfig
2511         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8569mds freescale
2512
2513 MPC8572DS_36BIT_config \
2514 MPC8572DS_config:       unconfig
2515         @mkdir -p $(obj)include
2516         @if [ "$(findstring _36BIT_,$@)" ] ; then \
2517                 echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \
2518                 $(XECHO) "... enabling 36-bit physical addressing." ; \
2519         fi
2520         @$(MKCONFIG) -a MPC8572DS ppc mpc85xx mpc8572ds freescale
2521
2522 P2020DS_36BIT_config \
2523 P2020DS_config:         unconfig
2524         @mkdir -p $(obj)include
2525         @if [ "$(findstring _36BIT_,$@)" ] ; then \
2526                 echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \
2527                 $(XECHO) "... enabling 36-bit physical addressing." ; \
2528         fi
2529         @$(MKCONFIG) -a P2020DS ppc mpc85xx p2020ds freescale
2530
2531 P1011RDB_config:        unconfig
2532         @mkdir -p $(obj)include
2533         @echo "#define CONFIG_P1011" >>$(obj)include/config.h ;
2534         @$(MKCONFIG) -a P1_P2_RDB  ppc mpc85xx p1_p2_rdb freescale
2535
2536 P1020RDB_config:        unconfig
2537         @mkdir -p $(obj)include
2538         @echo "#define CONFIG_P1020" >>$(obj)include/config.h ;
2539         @$(MKCONFIG) -a P1_P2_RDB  ppc mpc85xx p1_p2_rdb freescale
2540
2541 P2010RDB_config:        unconfig
2542         @mkdir -p $(obj)include
2543         @echo "#define CONFIG_P2010" >>$(obj)include/config.h ;
2544         @$(MKCONFIG) -a P1_P2_RDB  ppc mpc85xx p1_p2_rdb freescale
2545
2546 P2020RDB_config:        unconfig
2547         @mkdir -p $(obj)include
2548         @echo "#define CONFIG_P2020" >>$(obj)include/config.h ;
2549         @$(MKCONFIG) -a P1_P2_RDB  ppc mpc85xx p1_p2_rdb freescale
2550
2551 PM854_config:   unconfig
2552         @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854
2553
2554 PM856_config:   unconfig
2555         @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm856
2556
2557 sbc8540_config \
2558 sbc8540_33_config \
2559 sbc8540_66_config:      unconfig
2560         @mkdir -p $(obj)include
2561         @if [ "$(findstring _66_,$@)" ] ; then \
2562                 echo "#define CONFIG_PCI_66"    >>$(obj)include/config.h ; \
2563                 $(XECHO) "... 66 MHz PCI" ; \
2564         else \
2565                 $(XECHO) "... 33 MHz PCI" ; \
2566         fi
2567         @$(MKCONFIG) -a SBC8540 ppc mpc85xx sbc8560
2568
2569 sbc8548_config:         unconfig
2570         @$(MKCONFIG) $(@:_config=) ppc mpc85xx sbc8548
2571
2572 sbc8560_config \
2573 sbc8560_33_config \
2574 sbc8560_66_config:      unconfig
2575         @mkdir -p $(obj)include
2576         @if [ "$(findstring _66_,$@)" ] ; then \
2577                 echo "#define CONFIG_PCI_66"    >>$(obj)include/config.h ; \
2578                 $(XECHO) "... 66 MHz PCI" ; \
2579         else \
2580                 $(XECHO) "... 33 MHz PCI" ; \
2581         fi
2582         @$(MKCONFIG) -a sbc8560 ppc mpc85xx sbc8560
2583
2584 socrates_config:        unconfig
2585         @$(MKCONFIG) $(@:_config=) ppc mpc85xx socrates
2586
2587 stxgp3_config:          unconfig
2588         @$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3 stx
2589
2590 stxssa_config           \
2591 stxssa_4M_config:       unconfig
2592         @mkdir -p $(obj)include
2593         @if [ "$(findstring _4M_,$@)" ] ; then \
2594                 echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \
2595                 $(XECHO) "... with 4 MiB flash memory" ; \
2596         fi
2597         @$(MKCONFIG) -a stxssa ppc mpc85xx stxssa stx
2598
2599 TQM8540_config          \
2600 TQM8541_config          \
2601 TQM8548_config          \
2602 TQM8548_AG_config       \
2603 TQM8548_BE_config       \
2604 TQM8555_config          \
2605 TQM8560_config:         unconfig
2606         @mkdir -p $(obj)include
2607         @BTYPE=$(@:_config=); \
2608         CTYPE=$(subst TQM,,$(subst _AG,,$(subst _BE,,$(@:_config=)))); \
2609         $(XECHO) "... "$${BTYPE}" (MPC"$${CTYPE}")"; \
2610         echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \
2611         echo "#define CONFIG_$${BTYPE}">>$(obj)include/config.h; \
2612         echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \
2613         echo "#define CONFIG_BOARDNAME \"$${BTYPE}\"">>$(obj)include/config.h;
2614         @$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx tqc
2615         @echo "CONFIG_$(@:_config=) = y">>$(obj)include/config.mk;
2616
2617 XPEDITE5200_config:     unconfig
2618         @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5200 xes
2619
2620 XPEDITE5370_config:     unconfig
2621         @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5370 xes
2622
2623 #########################################################################
2624 ## MPC86xx Systems
2625 #########################################################################
2626
2627 MPC8610HPCD_config:     unconfig
2628         @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8610hpcd freescale
2629
2630 MPC8641HPCN_36BIT_config \
2631 MPC8641HPCN_config:    unconfig
2632         @mkdir -p $(obj)include
2633         @if [ "$(findstring _36BIT_,$@)" ] ; then \
2634                 echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \
2635                 $(XECHO) "... enabling 36-bit physical addressing." ; \
2636         fi
2637         @$(MKCONFIG) -a MPC8641HPCN ppc mpc86xx mpc8641hpcn freescale
2638
2639 sbc8641d_config:        unconfig
2640         @$(MKCONFIG) $(@:_config=) ppc mpc86xx sbc8641d
2641
2642 XPEDITE5170_config:     unconfig
2643         @$(MKCONFIG) $(@:_config=) ppc mpc86xx xpedite5170 xes
2644
2645 #########################################################################
2646 ## 74xx/7xx Systems
2647 #########################################################################
2648
2649 AmigaOneG3SE_config:    unconfig
2650         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI
2651
2652 BAB7xx_config: unconfig
2653         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx bab7xx eltec
2654
2655 CPCI750_config: unconfig
2656         @$(MKCONFIG) CPCI750 ppc 74xx_7xx cpci750 esd
2657
2658 DB64360_config: unconfig
2659         @$(MKCONFIG) DB64360 ppc 74xx_7xx db64360 Marvell
2660
2661 DB64460_config: unconfig
2662         @$(MKCONFIG) DB64460 ppc 74xx_7xx db64460 Marvell
2663
2664 ELPPC_config: unconfig
2665         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx elppc eltec
2666
2667 EVB64260_config \
2668 EVB64260_750CX_config:  unconfig
2669         @$(MKCONFIG) EVB64260 ppc 74xx_7xx evb64260
2670
2671 mpc7448hpc2_config:  unconfig
2672         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx mpc7448hpc2 freescale
2673
2674 P3G4_config: unconfig
2675         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
2676
2677 p3m750_config   \
2678 p3m7448_config:         unconfig
2679         @mkdir -p $(obj)include
2680         @if [ "$(findstring 750_,$@)" ] ; then \
2681                 echo "#define CONFIG_P3M750" >>$(obj)include/config.h ; \
2682         else \
2683                 echo "#define CONFIG_P3M7448" >>$(obj)include/config.h ; \
2684         fi
2685         @$(MKCONFIG) -a p3mx ppc 74xx_7xx p3mx prodrive
2686
2687 PCIPPC2_config \
2688 PCIPPC6_config: unconfig
2689         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx pcippc2
2690
2691 ppmc7xx_config: unconfig
2692         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx ppmc7xx
2693
2694 ZUMA_config:    unconfig
2695         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
2696
2697 #========================================================================
2698 # ARM
2699 #========================================================================
2700 #########################################################################
2701 ## StrongARM Systems
2702 #########################################################################
2703
2704 assabet_config  :       unconfig
2705         @$(MKCONFIG) $(@:_config=) arm sa1100 assabet
2706
2707 dnp1110_config  :       unconfig
2708         @$(MKCONFIG) $(@:_config=) arm sa1100 dnp1110
2709
2710 gcplus_config   :       unconfig
2711         @$(MKCONFIG) $(@:_config=) arm sa1100 gcplus
2712
2713 lart_config     :       unconfig
2714         @$(MKCONFIG) $(@:_config=) arm sa1100 lart
2715
2716 shannon_config  :       unconfig
2717         @$(MKCONFIG) $(@:_config=) arm sa1100 shannon
2718
2719 #########################################################################
2720 ## ARM92xT Systems
2721 #########################################################################
2722
2723 #########################################################################
2724 ## Atmel AT91RM9200 Systems
2725 #########################################################################
2726
2727 at91rm9200dk_config     :       unconfig
2728         @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
2729
2730 at91rm9200ek_config     :       unconfig
2731         @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200ek atmel at91rm9200
2732
2733 cmc_pu2_config  :       unconfig
2734         @$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
2735
2736 csb637_config   :       unconfig
2737         @$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200
2738
2739 kb9202_config   :       unconfig
2740         @$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200
2741
2742 m501sk_config   :       unconfig
2743         @$(MKCONFIG) $(@:_config=) arm arm920t m501sk NULL at91rm9200
2744
2745 mp2usb_config   :       unconfig
2746         @$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200
2747
2748 #########################################################################
2749 ## Atmel ARM926EJ-S Systems
2750 #########################################################################
2751
2752 afeb9260_config:        unconfig
2753         @$(MKCONFIG) $(@:_config=) arm arm926ejs afeb9260 NULL at91
2754
2755 at91cap9adk_config      :       unconfig
2756         @$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91
2757
2758 at91sam9260ek_nandflash_config \
2759 at91sam9260ek_dataflash_cs0_config \
2760 at91sam9260ek_dataflash_cs1_config \
2761 at91sam9260ek_config \
2762 at91sam9g20ek_nandflash_config \
2763 at91sam9g20ek_dataflash_cs0_config \
2764 at91sam9g20ek_dataflash_cs1_config \
2765 at91sam9g20ek_config    :       unconfig
2766         @mkdir -p $(obj)include
2767         @if [ "$(findstring 9g20,$@)" ] ; then \
2768                 echo "#define CONFIG_AT91SAM9G20EK 1"   >>$(obj)include/config.h ; \
2769                 $(XECHO) "... 9G20 Variant" ; \
2770         else \
2771                 echo "#define CONFIG_AT91SAM9260EK 1"   >>$(obj)include/config.h ; \
2772         fi;
2773         @if [ "$(findstring _nandflash,$@)" ] ; then \
2774                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2775                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2776         elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
2777                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"   >>$(obj)include/config.h ; \
2778                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2779         else \
2780                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1"   >>$(obj)include/config.h ; \
2781                 $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
2782         fi;
2783         @$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
2784
2785 at91sam9xeek_nandflash_config \
2786 at91sam9xeek_dataflash_cs0_config \
2787 at91sam9xeek_dataflash_cs1_config \
2788 at91sam9xeek_config     :       unconfig
2789         @mkdir -p $(obj)include
2790         @if [ "$(findstring _nandflash,$@)" ] ; then \
2791                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2792                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2793         elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
2794                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"   >>$(obj)include/config.h ; \
2795                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2796         else \
2797                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1"   >>$(obj)include/config.h ; \
2798                 $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
2799         fi;
2800         @$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
2801
2802 at91sam9261ek_nandflash_config \
2803 at91sam9261ek_dataflash_cs0_config \
2804 at91sam9261ek_dataflash_cs3_config \
2805 at91sam9261ek_config \
2806 at91sam9g10ek_nandflash_config \
2807 at91sam9g10ek_dataflash_cs0_config \
2808 at91sam9g10ek_dataflash_cs3_config \
2809 at91sam9g10ek_config    :       unconfig
2810         @mkdir -p $(obj)include
2811         @if [ "$(findstring 9g10,$@)" ] ; then \
2812                 echo "#define CONFIG_AT91SAM9G10EK 1"   >>$(obj)include/config.h ; \
2813                 $(XECHO) "... 9G10 Variant" ; \
2814         else \
2815                 echo "#define CONFIG_AT91SAM9261EK 1"   >>$(obj)include/config.h ; \
2816         fi;
2817         @if [ "$(findstring _nandflash,$@)" ] ; then \
2818                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2819                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2820         elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
2821                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1"   >>$(obj)include/config.h ; \
2822                 $(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \
2823         else \
2824                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"   >>$(obj)include/config.h ; \
2825                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2826         fi;
2827         @$(MKCONFIG) -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91
2828
2829 at91sam9263ek_norflash_config \
2830 at91sam9263ek_norflash_boot_config \
2831 at91sam9263ek_nandflash_config \
2832 at91sam9263ek_dataflash_config \
2833 at91sam9263ek_dataflash_cs0_config \
2834 at91sam9263ek_config    :       unconfig
2835         @mkdir -p $(obj)include
2836         @if [ "$(findstring _nandflash,$@)" ] ; then \
2837                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2838                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2839         elif [ "$(findstring norflash,$@)" ] ; then \
2840                 echo "#define CONFIG_SYS_USE_NORFLASH 1"        >>$(obj)include/config.h ; \
2841                 $(XECHO) "... with environment variable in NOR FLASH" ; \
2842         else \
2843                 echo "#define CONFIG_SYS_USE_DATAFLASH 1"       >>$(obj)include/config.h ; \
2844                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2845         fi;
2846         @if [ "$(findstring norflash_boot,$@)" ] ; then \
2847                 echo "#define CONFIG_SYS_USE_BOOT_NORFLASH 1"   >>$(obj)include/config.h ; \
2848                 $(XECHO) "... and boot from NOR FLASH" ; \
2849         fi;
2850         @$(MKCONFIG) -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91
2851
2852 at91sam9rlek_nandflash_config \
2853 at91sam9rlek_dataflash_config \
2854 at91sam9rlek_dataflash_cs0_config \
2855 at91sam9rlek_config     :       unconfig
2856         @mkdir -p $(obj)include
2857         @if [ "$(findstring _nandflash,$@)" ] ; then \
2858                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2859                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2860         else \
2861                 echo "#define CONFIG_SYS_USE_DATAFLASH 1"       >>$(obj)include/config.h ; \
2862                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2863         fi;
2864         @$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91
2865
2866 meesc_config    :       unconfig
2867         @$(MKCONFIG) $(@:_config=) arm arm926ejs meesc esd at91
2868
2869 pm9261_config   :       unconfig
2870         @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9261 ronetix at91
2871
2872 at91sam9m10g45ek_nandflash_config \
2873 at91sam9m10g45ek_dataflash_config \
2874 at91sam9m10g45ek_dataflash_cs0_config \
2875 at91sam9m10g45ek_config \
2876 at91sam9g45ekes_nandflash_config \
2877 at91sam9g45ekes_dataflash_config \
2878 at91sam9g45ekes_dataflash_cs0_config \
2879 at91sam9g45ekes_config  :       unconfig
2880         @mkdir -p $(obj)include
2881                 @if [ "$(findstring 9m10,$@)" ] ; then \
2882                 echo "#define CONFIG_AT91SAM9M10G45EK 1"        >>$(obj)include/config.h ; \
2883                 $(XECHO) "... 9M10G45 Variant" ; \
2884         else \
2885                 echo "#define CONFIG_AT91SAM9G45EKES 1" >>$(obj)include/config.h ; \
2886         fi;
2887
2888         @if [ "$(findstring _nandflash,$@)" ] ; then \
2889                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2890                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2891         else \
2892                 echo "#define CONFIG_ATMEL_SPI 1"       >>$(obj)include/config.h ; \
2893                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2894         fi;
2895         @$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91
2896
2897 pm9263_config   :       unconfig
2898         @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91
2899
2900 ########################################################################
2901 ## ARM Integrator boards - see doc/README-integrator for more info.
2902 integratorap_config     \
2903 ap_config               \
2904 ap966_config            \
2905 ap922_config            \
2906 ap922_XA10_config       \
2907 ap7_config              \
2908 ap720t_config           \
2909 ap920t_config           \
2910 ap926ejs_config         \
2911 ap946es_config: unconfig
2912         @board/armltd/integrator/split_by_variant.sh ap $@
2913
2914 integratorcp_config     \
2915 cp_config               \
2916 cp920t_config           \
2917 cp926ejs_config         \
2918 cp946es_config          \
2919 cp1136_config           \
2920 cp966_config            \
2921 cp922_config            \
2922 cp922_XA10_config       \
2923 cp1026_config: unconfig
2924         @board/armltd/integrator/split_by_variant.sh cp $@
2925
2926 davinci_dvevm_config :  unconfig
2927         @$(MKCONFIG) $(@:_config=) arm arm926ejs dvevm davinci davinci
2928
2929 davinci_schmoogie_config :      unconfig
2930         @$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci
2931
2932 davinci_sffsdr_config : unconfig
2933         @$(MKCONFIG) $(@:_config=) arm arm926ejs sffsdr davinci davinci
2934
2935 davinci_sonata_config : unconfig
2936         @$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci
2937
2938 davinci_dm355evm_config :       unconfig
2939         @$(MKCONFIG) $(@:_config=) arm arm926ejs dm355evm davinci davinci
2940
2941 lpd7a400_config \
2942 lpd7a404_config:        unconfig
2943         @$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x
2944
2945 mv88f6281gtw_ge_config: unconfig
2946         @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
2947
2948 mx1ads_config   :       unconfig
2949         @$(MKCONFIG) $(@:_config=) arm arm920t mx1ads NULL imx
2950
2951 mx1fs2_config   :       unconfig
2952         @$(MKCONFIG) $(@:_config=) arm arm920t mx1fs2 NULL imx
2953
2954 netstar_config:         unconfig
2955         @$(MKCONFIG) $(@:_config=) arm arm925t netstar
2956
2957 nhk8815_config \
2958 nhk8815_onenand_config: unconfig
2959         @mkdir -p $(obj)include
2960         @ > $(obj)include/config.h
2961         @if [ "$(findstring _onenand, $@)" ] ; then \
2962                 echo "#define CONFIG_BOOT_ONENAND" >> $(obj)include/config.h; \
2963                 $(XECHO) "... configured to boot from OneNand Flash"; \
2964         else \
2965                 $(XECHO) "... configured to boot from Nand Flash"; \
2966         fi
2967         @$(MKCONFIG) -a nhk8815 arm arm926ejs nhk8815 st nomadik
2968
2969 omap1510inn_config :    unconfig
2970         @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn
2971
2972 xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
2973
2974 omap1610inn_config \
2975 omap1610inn_cs0boot_config \
2976 omap1610inn_cs3boot_config \
2977 omap1610inn_cs_autoboot_config \
2978 omap1610h2_config \
2979 omap1610h2_cs0boot_config \
2980 omap1610h2_cs3boot_config \
2981 omap1610h2_cs_autoboot_config:  unconfig
2982         @mkdir -p $(obj)include
2983         @if [ "$(findstring _cs0boot_, $@)" ] ; then \
2984                 echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \
2985                 $(XECHO) "... configured for CS0 boot"; \
2986         elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \
2987                 echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \
2988                 $(XECHO) "... configured for CS_AUTO boot"; \
2989         else \
2990                 echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
2991                 $(XECHO) "... configured for CS3 boot"; \
2992         fi;
2993         @$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap
2994
2995 omap5912osk_config :    unconfig
2996         @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk NULL omap
2997
2998 xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1)))
2999
3000 omap730p2_config \
3001 omap730p2_cs0boot_config \
3002 omap730p2_cs3boot_config :      unconfig
3003         @mkdir -p $(obj)include
3004         @if [ "$(findstring _cs0boot_, $@)" ] ; then \
3005                 echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \
3006                 $(XECHO) "... configured for CS0 boot"; \
3007         else \
3008                 echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
3009                 $(XECHO) "... configured for CS3 boot"; \
3010         fi;
3011         @$(MKCONFIG) -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 NULL omap
3012
3013 rd6281a_config: unconfig
3014         @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
3015
3016 sbc2410x_config: unconfig
3017         @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0
3018
3019 scb9328_config  :       unconfig
3020         @$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx
3021
3022 sheevaplug_config: unconfig
3023         @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
3024
3025 smdk2400_config :       unconfig
3026         @$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 samsung s3c24x0
3027
3028 smdk2410_config :       unconfig
3029         @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 samsung s3c24x0
3030
3031 SX1_stdout_serial_config \
3032 SX1_config:             unconfig
3033         @mkdir -p $(obj)include
3034         @if [ "$(findstring _stdout_serial_, $@)" ] ; then \
3035                 echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
3036                 $(XECHO) "... configured for stdout serial"; \
3037         else \
3038                 echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
3039                 $(XECHO) "... configured for stdout usbtty"; \
3040         fi;
3041         @$(MKCONFIG) SX1 arm arm925t sx1
3042
3043 # TRAB default configuration:   8 MB Flash, 32 MB RAM
3044 xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1))))
3045
3046 trab_config \
3047 trab_bigram_config \
3048 trab_bigflash_config \
3049 trab_old_config:        unconfig
3050         @mkdir -p $(obj)include
3051         @mkdir -p $(obj)board/trab
3052         @[ -z "$(findstring _bigram,$@)" ] || \
3053                 { echo "#define CONFIG_FLASH_8MB"  >>$(obj)include/config.h ; \
3054                   echo "#define CONFIG_RAM_32MB"   >>$(obj)include/config.h ; \
3055                   $(XECHO) "... with 8 MB Flash, 32 MB RAM" ; \
3056                 }
3057         @[ -z "$(findstring _bigflash,$@)" ] || \
3058                 { echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \
3059                   echo "#define CONFIG_RAM_16MB"   >>$(obj)include/config.h ; \
3060                   $(XECHO) "... with 16 MB Flash, 16 MB RAM" ; \
3061                   echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
3062                 }
3063         @[ -z "$(findstring _old,$@)" ] || \
3064                 { echo "#define CONFIG_FLASH_8MB"  >>$(obj)include/config.h ; \
3065                   echo "#define CONFIG_RAM_16MB"   >>$(obj)include/config.h ; \
3066                   $(XECHO) "... with 8 MB Flash, 16 MB RAM" ; \
3067                   echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
3068                 }
3069         @$(MKCONFIG) -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0
3070
3071 VCMA9_config    :       unconfig
3072         @$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0
3073
3074 #########################################################################
3075 # ARM supplied Versatile development boards
3076 #########################################################################
3077
3078 cm4008_config   :       unconfig
3079         @$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695
3080
3081 cm41xx_config   :       unconfig
3082         @$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695
3083
3084 versatile_config        \
3085 versatileab_config      \
3086 versatilepb_config :    unconfig
3087         @board/armltd/versatile/split_by_variant.sh $@
3088
3089 voiceblue_config:       unconfig
3090         @$(MKCONFIG) $(@:_config=) arm arm925t voiceblue
3091
3092 #########################################################################
3093 ## S3C44B0 Systems
3094 #########################################################################
3095
3096 B2_config       :       unconfig
3097         @$(MKCONFIG) $(@:_config=) arm s3c44b0 B2 dave
3098
3099 #########################################################################
3100 ## ARM720T Systems
3101 #########################################################################
3102
3103 armadillo_config:       unconfig
3104         @$(MKCONFIG) $(@:_config=) arm arm720t armadillo
3105
3106 ep7312_config   :       unconfig
3107         @$(MKCONFIG) $(@:_config=) arm arm720t ep7312
3108
3109 impa7_config    :       unconfig
3110         @$(MKCONFIG) $(@:_config=) arm arm720t impa7
3111
3112 modnet50_config :       unconfig
3113         @$(MKCONFIG) $(@:_config=) arm arm720t modnet50
3114
3115 evb4510_config :        unconfig
3116         @$(MKCONFIG) $(@:_config=) arm arm720t evb4510 NULL s3c4510b
3117
3118 lpc2292sodimm_config:   unconfig
3119         @$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm NULL lpc2292
3120
3121 SMN42_config    :       unconfig
3122         @$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292
3123
3124 #########################################################################
3125 ## ARM CORTEX Systems
3126 #########################################################################
3127
3128 omap3_beagle_config :   unconfig
3129         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 beagle omap3 omap3
3130
3131 omap3_overo_config :    unconfig
3132         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 overo omap3 omap3
3133
3134 omap3_evm_config :      unconfig
3135         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 evm omap3 omap3
3136
3137 omap3_pandora_config :  unconfig
3138         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 pandora omap3 omap3
3139
3140 omap3_zoom1_config :    unconfig
3141         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom1 omap3 omap3
3142
3143 omap3_zoom2_config :    unconfig
3144         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 omap3 omap3
3145
3146 #########################################################################
3147 ## XScale Systems
3148 #########################################################################
3149
3150 actux1_config   :       unconfig
3151         @$(MKCONFIG) $(@:_config=) arm ixp actux1
3152
3153 actux2_config   :       unconfig
3154         @$(MKCONFIG) $(@:_config=) arm ixp actux2
3155
3156 actux3_config   :       unconfig
3157         @$(MKCONFIG) $(@:_config=) arm ixp actux3
3158
3159 actux4_config   :       unconfig
3160         @$(MKCONFIG) $(@:_config=) arm ixp actux4
3161
3162 cerf250_config :        unconfig
3163         @$(MKCONFIG) $(@:_config=) arm pxa cerf250
3164
3165 cradle_config   :       unconfig
3166         @$(MKCONFIG) $(@:_config=) arm pxa cradle
3167
3168 csb226_config   :       unconfig
3169         @$(MKCONFIG) $(@:_config=) arm pxa csb226
3170
3171 delta_config :  unconfig
3172         @$(MKCONFIG) $(@:_config=) arm pxa delta
3173
3174 innokom_config  :       unconfig
3175         @$(MKCONFIG) $(@:_config=) arm pxa innokom
3176
3177 ixdp425_config  :       unconfig
3178         @$(MKCONFIG) $(@:_config=) arm ixp ixdp425
3179
3180 ixdpg425_config :       unconfig
3181         @$(MKCONFIG) $(@:_config=) arm ixp ixdp425
3182
3183 lubbock_config  :       unconfig
3184         @$(MKCONFIG) $(@:_config=) arm pxa lubbock
3185
3186 pleb2_config    :       unconfig
3187         @$(MKCONFIG) $(@:_config=) arm pxa pleb2
3188
3189 logodl_config   :       unconfig
3190         @$(MKCONFIG) $(@:_config=) arm pxa logodl
3191
3192 pdnb3_config \
3193 scpu_config:    unconfig
3194         @mkdir -p $(obj)include
3195         @if [ "$(findstring scpu_,$@)" ] ; then \
3196                 echo "#define CONFIG_SCPU"      >>$(obj)include/config.h ; \
3197                 $(XECHO) "... on SCPU board variant" ; \
3198         fi
3199         @$(MKCONFIG) -a pdnb3 arm ixp pdnb3 prodrive
3200
3201 pxa255_idp_config:      unconfig
3202         @$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp
3203
3204 polaris_config \
3205 trizepsiv_config        :       unconfig
3206         @mkdir -p $(obj)include
3207         @if [ "$(findstring polaris,$@)" ] ; then \
3208                 echo "#define CONFIG_POLARIS 1" >>$(obj)include/config.h ; \
3209         fi;
3210         @$(MKCONFIG) -a trizepsiv arm pxa trizepsiv
3211
3212 wepep250_config :       unconfig
3213         @$(MKCONFIG) $(@:_config=) arm pxa wepep250
3214
3215 xaeniax_config  :       unconfig
3216         @$(MKCONFIG) $(@:_config=) arm pxa xaeniax
3217
3218 xm250_config    :       unconfig
3219         @$(MKCONFIG) $(@:_config=) arm pxa xm250
3220
3221 xsengine_config :       unconfig
3222         @$(MKCONFIG) $(@:_config=) arm pxa xsengine
3223
3224 zylonite_config :
3225         @$(MKCONFIG) $(@:_config=) arm pxa zylonite
3226
3227 #########################################################################
3228 ## ARM1136 Systems
3229 #########################################################################
3230
3231 apollon_config          : unconfig
3232         @mkdir -p $(obj)include
3233         @mkdir -p $(obj)onenand_ipl/board/apollon
3234         @echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h
3235         @$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx
3236         @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk
3237
3238 imx31_litekit_config    : unconfig
3239         @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit NULL mx31
3240
3241 imx31_phycore_eet_config \
3242 imx31_phycore_config    : unconfig
3243         @mkdir -p $(obj)include
3244         @if [ -n "$(findstring _eet_,$@)" ]; then                       \
3245                 echo "#define CONFIG_IMX31_PHYCORE_EET" >> $(obj)include/config.h;      \
3246         fi
3247         @$(MKCONFIG) -a imx31_phycore arm arm1136 imx31_phycore NULL mx31
3248
3249 mx31ads_config          : unconfig
3250         @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31
3251
3252 mx31pdk_config \
3253 mx31pdk_nand_config     : unconfig
3254         @mkdir -p $(obj)include
3255         @if [ -n "$(findstring _nand_,$@)" ]; then                                      \
3256                 echo "#define CONFIG_NAND_U_BOOT" >> $(obj)include/config.h;            \
3257         else                                                                            \
3258                 echo "#define CONFIG_SKIP_LOWLEVEL_INIT" >> $(obj)include/config.h;     \
3259                 echo "#define CONFIG_SKIP_RELOCATE_UBOOT" >> $(obj)include/config.h;    \
3260         fi
3261         @$(MKCONFIG) -a mx31pdk arm arm1136 mx31pdk freescale mx31
3262
3263 omap2420h4_config       : unconfig
3264         @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx
3265
3266 qong_config             : unconfig
3267         @$(MKCONFIG) $(@:_config=) arm arm1136 qong davedenx mx31
3268
3269 #########################################################################
3270 ## ARM1176 Systems
3271 #########################################################################
3272 smdk6400_noUSB_config   \
3273 smdk6400_config :       unconfig
3274         @mkdir -p $(obj)include $(obj)board/samsung/smdk6400
3275         @mkdir -p $(obj)nand_spl/board/samsung/smdk6400
3276         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
3277         @if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then                       \
3278                 echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
3279                 $(MKCONFIG) $(@:_config=) arm arm1176 smdk6400 samsung s3c64xx;         \
3280         else                                                                            \
3281                 echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
3282                 $(MKCONFIG) $(@:_noUSB_config=) arm arm1176 smdk6400 samsung s3c64xx;   \
3283         fi
3284         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
3285
3286 #========================================================================
3287 # i386
3288 #========================================================================
3289 #########################################################################
3290 ## AMD SC520 CDP
3291 #########################################################################
3292 eNET_config     :       unconfig
3293         @$(MKCONFIG) $(@:_config=) i386 i386 eNET NULL sc520
3294
3295 sc520_cdp_config        :       unconfig
3296         @$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp NULL sc520
3297
3298 sc520_spunk_config      :       unconfig
3299         @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520
3300
3301 sc520_spunk_rel_config  :       unconfig
3302         @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520
3303
3304 #========================================================================
3305 # MIPS
3306 #========================================================================
3307 #########################################################################
3308 ## MIPS32 4Kc
3309 #########################################################################
3310
3311 xtract_incaip = $(subst _100MHz,,$(subst _133MHz,,$(subst _150MHz,,$(subst _config,,$1))))
3312
3313 incaip_100MHz_config    \
3314 incaip_133MHz_config    \
3315 incaip_150MHz_config    \
3316 incaip_config: unconfig
3317         @mkdir -p $(obj)include
3318         @[ -z "$(findstring _100MHz,$@)" ] || \
3319                 { echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h ; \
3320                   $(XECHO) "... with 100MHz system clock" ; \
3321                 }
3322         @[ -z "$(findstring _133MHz,$@)" ] || \
3323                 { echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h ; \
3324                   $(XECHO) "... with 133MHz system clock" ; \
3325                 }
3326         @[ -z "$(findstring _150MHz,$@)" ] || \
3327                 { echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h ; \
3328                   $(XECHO) "... with 150MHz system clock" ; \
3329                 }
3330         @$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip
3331
3332 tb0229_config: unconfig
3333         @$(MKCONFIG) $(@:_config=) mips mips tb0229
3334
3335 vct_premium_config              \
3336 vct_premium_small_config        \
3337 vct_premium_onenand_config      \
3338 vct_premium_onenand_small_config \
3339 vct_platinum_config             \
3340 vct_platinum_small_config       \
3341 vct_platinum_onenand_config     \
3342 vct_platinum_onenand_small_config \
3343 vct_platinumavc_config          \
3344 vct_platinumavc_small_config    \
3345 vct_platinumavc_onenand_config  \
3346 vct_platinumavc_onenand_small_config: unconfig
3347         @mkdir -p $(obj)include
3348         @if [ "$(findstring _premium,$@)" ] ; then \
3349                 echo "#define CONFIG_VCT_PREMIUM" > $(obj)include/config.h ; \
3350                 $(XECHO) "... on Premium board variant" ; \
3351         fi
3352         @if [ "$(findstring _platinum_,$@)" ] ; then \
3353                 echo "#define CONFIG_VCT_PLATINUM" > $(obj)include/config.h ; \
3354                 $(XECHO) "... on Platinum board variant" ; \
3355         fi
3356         @if [ "$(findstring _platinumavc,$@)" ] ; then \
3357                 echo "#define CONFIG_VCT_PLATINUMAVC" > $(obj)include/config.h ; \
3358                 $(XECHO) "... on PlatinumAVC board variant" ; \
3359         fi
3360         @if [ "$(findstring _onenand,$@)" ] ; then \
3361                 echo "#define CONFIG_VCT_ONENAND" >> $(obj)include/config.h ; \
3362                 $(XECHO) "... on OneNAND board variant" ; \
3363         fi
3364         @if [ "$(findstring _small,$@)" ] ; then \
3365                 echo "#define CONFIG_VCT_SMALL_IMAGE" >> $(obj)include/config.h ; \
3366                 $(XECHO) "... stripped down image variant" ; \
3367         fi
3368         @$(MKCONFIG) -a vct mips mips vct micronas
3369
3370 #########################################################################
3371 ## MIPS32 AU1X00
3372 #########################################################################
3373
3374 dbau1000_config         :       unconfig
3375         @mkdir -p $(obj)include
3376         @echo "#define CONFIG_DBAU1000 1" >$(obj)include/config.h
3377         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3378
3379 dbau1100_config         :       unconfig
3380         @mkdir -p $(obj)include
3381         @echo "#define CONFIG_DBAU1100 1" >$(obj)include/config.h
3382         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3383
3384 dbau1500_config         :       unconfig
3385         @mkdir -p $(obj)include
3386         @echo "#define CONFIG_DBAU1500 1" >$(obj)include/config.h
3387         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3388
3389 dbau1550_config         :       unconfig
3390         @mkdir -p $(obj)include
3391         @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h
3392         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3393
3394 dbau1550_el_config      :       unconfig
3395         @mkdir -p $(obj)include
3396         @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h
3397         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3398
3399 gth2_config             :       unconfig
3400         @mkdir -p $(obj)include
3401         @echo "#define CONFIG_GTH2 1" >$(obj)include/config.h
3402         @$(MKCONFIG) -a gth2 mips mips gth2
3403
3404 pb1000_config           :       unconfig
3405         @mkdir -p $(obj)include
3406         @echo "#define CONFIG_PB1000 1" >$(obj)include/config.h
3407         @$(MKCONFIG) -a pb1x00 mips mips pb1x00
3408
3409 qemu_mips_config        : unconfig
3410         @mkdir -p $(obj)include
3411         @echo "#define CONFIG_QEMU_MIPS 1" >$(obj)include/config.h
3412         @$(MKCONFIG) -a qemu-mips mips mips qemu-mips
3413
3414 #########################################################################
3415 ## MIPS64 5Kc
3416 #########################################################################
3417
3418 purple_config :         unconfig
3419         @$(MKCONFIG) $(@:_config=) mips mips purple
3420
3421 #========================================================================
3422 # Nios
3423 #========================================================================
3424 #########################################################################
3425 ## Nios32
3426 #########################################################################
3427
3428 ADNPESC1_DNPEVA2_base_32_config \
3429 ADNPESC1_base_32_config         \
3430 ADNPESC1_config: unconfig
3431         @mkdir -p $(obj)include
3432         @[ -z "$(findstring _DNPEVA2,$@)" ] || \
3433                 { echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \
3434                   $(XECHO) "... DNP/EVA2 configuration" ; \
3435                 }
3436         @[ -z "$(findstring _base_32,$@)" ] || \
3437                 { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
3438                   $(XECHO) "... NIOS 'base_32' configuration" ; \
3439                 }
3440         @[ -z "$(findstring ADNPESC1_config,$@)" ] || \
3441                 { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
3442                   $(XECHO) "... NIOS 'base_32' configuration (DEFAULT)" ; \
3443                 }
3444         @$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv
3445
3446 DK1C20_safe_32_config           \
3447 DK1C20_standard_32_config       \
3448 DK1C20_config:  unconfig
3449         @mkdir -p $(obj)include
3450         @[ -z "$(findstring _safe_32,$@)" ] || \
3451                 { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
3452                   $(XECHO) "... NIOS 'safe_32' configuration" ; \
3453                 }
3454         @[ -z "$(findstring _standard_32,$@)" ] || \
3455                 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
3456                   $(XECHO) "... NIOS 'standard_32' configuration" ; \
3457                 }
3458         @[ -z "$(findstring DK1C20_config,$@)" ] || \
3459                 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
3460                   $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \
3461                 }
3462         @$(MKCONFIG) -a DK1C20 nios nios dk1c20 altera
3463
3464 DK1S10_safe_32_config           \
3465 DK1S10_standard_32_config       \
3466 DK1S10_mtx_ldk_20_config        \
3467 DK1S10_config:  unconfig
3468         @mkdir -p $(obj)include
3469         @[ -z "$(findstring _safe_32,$@)" ] || \
3470                 { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
3471                   $(XECHO) "... NIOS 'safe_32' configuration" ; \
3472                 }
3473         @[ -z "$(findstring _standard_32,$@)" ] || \
3474                 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
3475                   $(XECHO) "... NIOS 'standard_32' configuration" ; \
3476                 }
3477         @[ -z "$(findstring _mtx_ldk_20,$@)" ] || \
3478                 { echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>$(obj)include/config.h ; \
3479                   $(XECHO) "... NIOS 'mtx_ldk_20' configuration" ; \
3480                 }
3481         @[ -z "$(findstring DK1S10_config,$@)" ] || \
3482                 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
3483                   $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \
3484                 }
3485         @$(MKCONFIG) -a DK1S10 nios nios dk1s10 altera
3486
3487 #########################################################################
3488 ## Nios-II
3489 #########################################################################
3490
3491 EP1C20_config : unconfig
3492         @$(MKCONFIG)  EP1C20 nios2 nios2 ep1c20 altera
3493
3494 EP1S10_config : unconfig
3495         @$(MKCONFIG)  EP1S10 nios2 nios2 ep1s10 altera
3496
3497 EP1S40_config : unconfig
3498         @$(MKCONFIG)  EP1S40 nios2 nios2 ep1s40 altera
3499
3500 PK1C20_config : unconfig
3501         @$(MKCONFIG)  PK1C20 nios2 nios2 pk1c20 psyent
3502
3503 PCI5441_config : unconfig
3504         @$(MKCONFIG)  PCI5441 nios2 nios2 pci5441 psyent
3505
3506 #========================================================================
3507 ## Microblaze
3508 #========================================================================
3509
3510 microblaze-generic_config:      unconfig
3511         @mkdir -p $(obj)include
3512         @$(MKCONFIG) -a $(@:_config=) microblaze microblaze microblaze-generic xilinx
3513
3514 suzaku_config:  unconfig
3515         @mkdir -p $(obj)include
3516         @echo "#define CONFIG_SUZAKU 1" > $(obj)include/config.h
3517         @$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno
3518
3519 #========================================================================
3520 # Blackfin
3521 #========================================================================
3522
3523 # Analog Devices boards
3524 BFIN_BOARDS = bf518f-ezbrd bf526-ezbrd bf527-ezkit bf533-ezkit bf533-stamp \
3525         bf537-pnav bf537-stamp bf538f-ezkit bf548-ezkit bf561-ezkit
3526
3527 # Bluetechnix tinyboards
3528 BFIN_BOARDS += cm-bf527 cm-bf533 cm-bf537e cm-bf548 cm-bf561 tcm-bf537
3529
3530 # Misc third party boards
3531 BFIN_BOARDS += bf537-minotaur bf537-srv1 blackstamp
3532
3533 # I-SYST Micromodule
3534 BFIN_BOARDS += ibf-dsp561
3535
3536 $(BFIN_BOARDS:%=%_config)       : unconfig
3537         @$(MKCONFIG) $(@:_config=) blackfin blackfin $(@:_config=)
3538
3539 $(BFIN_BOARDS):
3540         $(MAKE) $@_config
3541         $(MAKE)
3542
3543 #========================================================================
3544 # AVR32
3545 #========================================================================
3546
3547 atngw100_config :       unconfig
3548         @$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x
3549
3550 atstk1002_config        :       unconfig
3551         @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
3552
3553 atstk1003_config        :       unconfig
3554         @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
3555
3556 atstk1004_config        :       unconfig
3557         @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
3558
3559 atstk1006_config        :       unconfig
3560         @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
3561
3562 favr-32-ezkit_config    :       unconfig
3563         @$(MKCONFIG) $(@:_config=) avr32 at32ap favr-32-ezkit earthlcd at32ap700x
3564
3565 hammerhead_config       :       unconfig
3566         @$(MKCONFIG) $(@:_config=) avr32 at32ap hammerhead miromico at32ap700x
3567
3568 mimc200_config          :       unconfig
3569         @$(MKCONFIG) $(@:_config=) avr32 at32ap mimc200 mimc at32ap700x
3570
3571 #========================================================================
3572 # SH3 (SuperH)
3573 #========================================================================
3574
3575 #########################################################################
3576 ## sh2 (Renesas SuperH)
3577 #########################################################################
3578 rsk7203_config: unconfig
3579         @mkdir -p $(obj)include
3580         @echo "#define CONFIG_RSK7203 1" > $(obj)include/config.h
3581         @$(MKCONFIG) -a $(@:_config=) sh sh2 rsk7203 renesas
3582
3583 #########################################################################
3584 ## sh3 (Renesas SuperH)
3585 #########################################################################
3586
3587 mpr2_config: unconfig
3588         @mkdir -p $(obj)include
3589         @echo "#define CONFIG_MPR2 1" > $(obj)include/config.h
3590         @$(MKCONFIG) -a $(@:_config=) sh sh3 mpr2
3591
3592 ms7720se_config: unconfig
3593         @mkdir -p $(obj)include
3594         @echo "#define CONFIG_MS7720SE 1" > $(obj)include/config.h
3595         @$(MKCONFIG) -a $(@:_config=) sh sh3 ms7720se
3596
3597 #########################################################################
3598 ## sh4 (Renesas SuperH)
3599 #########################################################################
3600
3601 MigoR_config :       unconfig
3602         @mkdir -p $(obj)include
3603         @echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h
3604         @$(MKCONFIG) -a $(@:_config=) sh sh4 MigoR renesas
3605
3606 ms7750se_config: unconfig
3607         @mkdir -p $(obj)include
3608         @echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h
3609         @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7750se
3610
3611 ms7722se_config :       unconfig
3612         @mkdir -p $(obj)include
3613         @echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h
3614         @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7722se
3615
3616 r2dplus_config  :   unconfig
3617         @mkdir -p $(obj)include
3618         @echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h
3619         @$(MKCONFIG) -a $(@:_config=) sh sh4 r2dplus renesas
3620
3621 r7780mp_config: unconfig
3622         @mkdir -p $(obj)include
3623         @echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h
3624         @$(MKCONFIG) -a $(@:_config=) sh sh4 r7780mp renesas
3625
3626 sh7763rdp_config  :   unconfig
3627         @mkdir -p $(obj)include
3628         @echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h
3629         @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7763rdp renesas
3630
3631 xtract_sh7785lcr = $(subst _32bit,,$(subst _config,,$1))
3632 sh7785lcr_32bit_config \
3633 sh7785lcr_config  :   unconfig
3634         @mkdir -p $(obj)include
3635         @mkdir -p $(obj)board/renesas/sh7785lcr
3636         @echo "#define CONFIG_SH7785LCR 1" > $(obj)include/config.h
3637         @if [ "$(findstring 32bit, $@)" ] ; then \
3638                 echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \
3639                 echo "TEXT_BASE = 0x8ff80000" > \
3640                         $(obj)board/renesas/sh7785lcr/config.tmp ; \
3641                   $(XECHO) " ... enable 32-Bit Address Extended Mode" ; \
3642         fi
3643         @$(MKCONFIG) -a $(call xtract_sh7785lcr,$@) sh sh4 sh7785lcr renesas
3644
3645 ap325rxa_config  :   unconfig
3646         @mkdir -p $(obj)include
3647         @echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h
3648         @$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa renesas
3649
3650 espt_config  :   unconfig
3651         @mkdir -p $(obj)include
3652         @echo "#define CONFIG_ESPT 1" > $(obj)include/config.h
3653         @$(MKCONFIG) -a $(@:_config=) sh sh4 espt
3654
3655 #========================================================================
3656 # SPARC
3657 #========================================================================
3658
3659 #########################################################################
3660 ## LEON3
3661 #########################################################################
3662
3663 # Gaisler GR-XC3S-1500 board
3664 gr_xc3s_1500_config : unconfig
3665         @$(MKCONFIG) $(@:_config=) sparc leon3 gr_xc3s_1500 gaisler
3666
3667 # Gaisler GR-CPCI-AX2000 board, a General purpose FPGA-AX system
3668 gr_cpci_ax2000_config : unconfig
3669         @$(MKCONFIG) $(@:_config=) sparc leon3 gr_cpci_ax2000 gaisler
3670
3671 # Gaisler GRLIB template design (GPL SPARC/LEON3) for Altera NIOS
3672 # Development board Stratix II edition, FPGA Device EP2S60.
3673 gr_ep2s60_config: unconfig
3674         @$(MKCONFIG) $(@:_config=) sparc leon3 gr_ep2s60 gaisler
3675
3676 # Gaisler LEON3 GRSIM simulator
3677 grsim_config : unconfig
3678         @$(MKCONFIG) $(@:_config=) sparc leon3 grsim gaisler
3679
3680 #########################################################################
3681 ## LEON2
3682 #########################################################################
3683
3684 # Gaisler LEON2 GRSIM simulator
3685 grsim_leon2_config : unconfig
3686         @$(MKCONFIG) $(@:_config=) sparc leon2 grsim_leon2 gaisler
3687
3688 #########################################################################
3689 #########################################################################
3690 #########################################################################
3691
3692 clean:
3693         @rm -f $(obj)examples/standalone/82559_eeprom                     \
3694                $(obj)examples/standalone/eepro100_eeprom                  \
3695                $(obj)examples/standalone/hello_world                      \
3696                $(obj)examples/standalone/interrupt                        \
3697                $(obj)examples/standalone/mem_to_mem_idma2intr             \
3698                $(obj)examples/standalone/sched                            \
3699                $(obj)examples/standalone/smc91111_eeprom                  \
3700                $(obj)examples/standalone/test_burst                       \
3701                $(obj)examples/standalone/timer
3702         @rm -f $(obj)examples/api/demo{,.bin}
3703         @rm -f $(obj)tools/bmp_logo        $(obj)tools/easylogo/easylogo  \
3704                $(obj)tools/env/{fw_printenv,fw_setenv}                    \
3705                $(obj)tools/envcrc                                         \
3706                $(obj)tools/gdb/{astest,gdbcont,gdbsend}                   \
3707                $(obj)tools/gen_eth_addr    $(obj)tools/img2srec           \
3708                $(obj)tools/mkimage         $(obj)tools/mpc86x_clk         \
3709                $(obj)tools/ncb             $(obj)tools/ubsha1
3710         @rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image}        \
3711                $(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin}      \
3712                $(obj)board/trab/trab_fkt   $(obj)board/voiceblue/eeprom   \
3713                $(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds  \
3714                $(obj)lib_blackfin/u-boot.lds                              \
3715                $(obj)u-boot.lds                                           \
3716                $(obj)cpu/blackfin/bootrom-asm-offsets.[chs]
3717         @rm -f $(obj)include/bmp_logo.h
3718         @rm -f $(obj)nand_spl/{u-boot.lds,u-boot-spl,u-boot-spl.map,System.map}
3719         @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl-2k.bin,ipl-4k.bin,ipl.map}
3720         @rm -f $(obj)onenand_ipl/u-boot.lds
3721         @rm -f $(TIMESTAMP_FILE) $(VERSION_FILE)
3722         @find $(OBJTREE) -type f \
3723                 \( -name 'core' -o -name '*.bak' -o -name '*~' \
3724                 -o -name '*.o'  -o -name '*.a' -o -name '*.exe' \) -print \
3725                 | xargs rm -f
3726
3727 clobber:        clean
3728         @find $(OBJTREE) -type f \( -name .depend \
3729                 -o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \
3730                 -print0 \
3731                 | xargs -0 rm -f
3732         @rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \
3733                 $(obj)cscope.* $(obj)*.*~
3734         @rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL)
3735         @rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes}
3736         @rm -f $(obj)cpu/mpc824x/bedbug_603e.c
3737         @rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
3738         @[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f
3739         @[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f
3740
3741 ifeq ($(OBJTREE),$(SRCTREE))
3742 mrproper \
3743 distclean:      clobber unconfig
3744 else
3745 mrproper \
3746 distclean:      clobber unconfig
3747         rm -rf $(obj)*
3748 endif
3749
3750 backup:
3751         F=`basename $(TOPDIR)` ; cd .. ; \
3752         gtar --force-local -zcvf `date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
3753
3754 #########################################################################