Makefile.in

   1 # Makefile.in generated by automake 1.15 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994-2014 Free Software Foundation, Inc.
   5
   6 # This Makefile.in is free software; the Free Software Foundation
   7 # gives unlimited permission to copy and/or distribute it,
   8 # with or without modifications, as long as this notice is preserved.
   9
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  13 # PARTICULAR PURPOSE.
  14
  15 @SET_MAKE@
  16
  17 VPATH = @srcdir@
  18 am__is_gnu_make = { \
  19   if test -z '$(MAKELEVEL)'; then \
  20     false; \
  21   elif test -n '$(MAKE_HOST)'; then \
  22     true; \
  23   elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
  24     true; \
  25   else \
  26     false; \
  27   fi; \
  28 }
  29 am__make_running_with_option = \
  30   case $${target_option-} in \
  31       ?) ;; \
  32       *) echo "am__make_running_with_option: internal error: invalid" \
  33               "target option '$${target_option-}' specified" >&2; \
  34          exit 1;; \
  35   esac; \
  36   has_opt=no; \
  37   sane_makeflags=$$MAKEFLAGS; \
  38   if $(am__is_gnu_make); then \
  39     sane_makeflags=$$MFLAGS; \
  40   else \
  41     case $$MAKEFLAGS in \
  42       *\\[\ \   ]*) \
  43         bs=\\; \
  44         sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
  45           | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
  46     esac; \
  47   fi; \
  48   skip_next=no; \
  49   strip_trailopt () \
  50   { \
  51     flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  52   }; \
  53   for flg in $$sane_makeflags; do \
  54     test $$skip_next = yes && { skip_next=no; continue; }; \
  55     case $$flg in \
  56       *=*|--*) continue;; \
  57         -*I) strip_trailopt 'I'; skip_next=yes;; \
  58       -*I?*) strip_trailopt 'I';; \
  59         -*O) strip_trailopt 'O'; skip_next=yes;; \
  60       -*O?*) strip_trailopt 'O';; \
  61         -*l) strip_trailopt 'l'; skip_next=yes;; \
  62       -*l?*) strip_trailopt 'l';; \
  63       -[dEDm]) skip_next=yes;; \
  64       -[JT]) skip_next=yes;; \
  65     esac; \
  66     case $$flg in \
  67       *$$target_option*) has_opt=yes; break;; \
  68     esac; \
  69   done; \
  70   test $$has_opt = yes
  71 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
  72 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
  73 pkgdatadir = $(datadir)/@PACKAGE@
  74 pkgincludedir = $(includedir)/@PACKAGE@
  75 pkglibdir = $(libdir)/@PACKAGE@
  76 pkglibexecdir = $(libexecdir)/@PACKAGE@
  77 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  78 install_sh_DATA = $(install_sh) -c -m 644
  79 install_sh_PROGRAM = $(install_sh) -c
  80 install_sh_SCRIPT = $(install_sh) -c
  81 INSTALL_HEADER = $(INSTALL_DATA)
  82 transform = $(program_transform_name)
  83 NORMAL_INSTALL = :
  84 PRE_INSTALL = :
  85 POST_INSTALL = :
  86 NORMAL_UNINSTALL = :
  87 PRE_UNINSTALL = :
  88 POST_UNINSTALL = :
  89 build_triplet = @build@
  90 host_triplet = @host@
  91 @HAVE_BINDDIR_TRUE@am__append_1 = bind/Makefile.in bind/bind.tar.gz bind/version.tmp
  92 subdir = .
  93 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  94 am__aclocal_m4_deps = $(top_srcdir)/configure.ac
  95 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  96         $(ACLOCAL_M4)
  97 DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
  98         $(am__configure_deps) $(nobase_include_HEADERS) \
  99         $(am__DIST_COMMON)
 100 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 101  configure.lineno config.status.lineno
 102 mkinstalldirs = $(install_sh) -d
 103 CONFIG_HEADER = $(top_builddir)/includes/config.h
 104 CONFIG_CLEAN_FILES = doc/devel/doxyfile
 105 CONFIG_CLEAN_VPATH_FILES =
 106 AM_V_P = $(am__v_P_@AM_V@)
 107 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
 108 am__v_P_0 = false
 109 am__v_P_1 = :
 110 AM_V_GEN = $(am__v_GEN_@AM_V@)
 111 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
 112 am__v_GEN_0 = @echo "  GEN     " $@;
 113 am__v_GEN_1 =
 114 AM_V_at = $(am__v_at_@AM_V@)
 115 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 116 am__v_at_0 = @
 117 am__v_at_1 =
 118 SOURCES =
 119 DIST_SOURCES =
 120 RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
 121         ctags-recursive dvi-recursive html-recursive info-recursive \
 122         install-data-recursive install-dvi-recursive \
 123         install-exec-recursive install-html-recursive \
 124         install-info-recursive install-pdf-recursive \
 125         install-ps-recursive install-recursive installcheck-recursive \
 126         installdirs-recursive pdf-recursive ps-recursive \
 127         tags-recursive uninstall-recursive
 128 am__can_run_installinfo = \
 129   case $$AM_UPDATE_INFO_DIR in \
 130     n|no|NO) false;; \
 131     *) (install-info --version) >/dev/null 2>&1;; \
 132   esac
 133 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 134 am__vpath_adj = case $$p in \
 135     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
 136     *) f=$$p;; \
 137   esac;
 138 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
 139 am__install_max = 40
 140 am__nobase_strip_setup = \
 141   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
 142 am__nobase_strip = \
 143   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
 144 am__nobase_list = $(am__nobase_strip_setup); \
 145   for p in $$list; do echo "$$p $$p"; done | \
 146   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
 147   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
 148     if (++n[$$2] == $(am__install_max)) \
 149       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
 150     END { for (dir in files) print dir, files[dir] }'
 151 am__base_list = \
 152   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
 153   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 154 am__uninstall_files_from_dir = { \
 155   test -z "$$files" \
 156     || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
 157     || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
 158          $(am__cd) "$$dir" && rm -f $$files; }; \
 159   }
 160 am__installdirs = "$(DESTDIR)$(includedir)"
 161 HEADERS = $(nobase_include_HEADERS)
 162 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
 163   distclean-recursive maintainer-clean-recursive
 164 am__recursive_targets = \
 165   $(RECURSIVE_TARGETS) \
 166   $(RECURSIVE_CLEAN_TARGETS) \
 167   $(am__extra_recursive_targets)
 168 AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
 169         cscope distdir dist dist-all distcheck
 170 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
 171 # Read a list of newline-separated strings from the standard input,
 172 # and print each of them once, without duplicates.  Input order is
 173 # *not* preserved.
 174 am__uniquify_input = $(AWK) '\
 175   BEGIN { nonempty = 0; } \
 176   { items[$$0] = 1; nonempty = 1; } \
 177   END { if (nonempty) { for (i in items) print i; }; } \
 178 '
 179 # Make sure the list of sources is unique.  This is necessary because,
 180 # e.g., the same source file might be shared among _SOURCES variables
 181 # for different programs/libraries.
 182 am__define_uniq_tagged_files = \
 183   list='$(am__tagged_files)'; \
 184   unique=`for i in $$list; do \
 185     if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 186   done | $(am__uniquify_input)`
 187 ETAGS = etags
 188 CTAGS = ctags
 189 CSCOPE = cscope
 190 DIST_SUBDIRS = $(SUBDIRS)
 191 am__DIST_COMMON = $(srcdir)/Makefile.in \
 192         $(top_srcdir)/doc/devel/doxyfile.in README compile \
 193         config.guess config.sub depcomp install-sh missing
 194 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 195 distdir = $(PACKAGE)-$(VERSION)
 196 top_distdir = $(distdir)
 197 am__remove_distdir = \
 198   if test -d "$(distdir)"; then \
 199     find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
 200       && rm -rf "$(distdir)" \
 201       || { sleep 5 && rm -rf "$(distdir)"; }; \
 202   else :; fi
 203 am__post_remove_distdir = $(am__remove_distdir)
 204 am__relativize = \
 205   dir0=`pwd`; \
 206   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
 207   sed_rest='s,^[^/]*/*,,'; \
 208   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
 209   sed_butlast='s,/*[^/]*$$,,'; \
 210   while test -n "$$dir1"; do \
 211     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
 212     if test "$$first" != "."; then \
 213       if test "$$first" = ".."; then \
 214         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
 215         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
 216       else \
 217         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
 218         if test "$$first2" = "$$first"; then \
 219           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
 220         else \
 221           dir2="../$$dir2"; \
 222         fi; \
 223         dir0="$$dir0"/"$$first"; \
 224       fi; \
 225     fi; \
 226     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
 227   done; \
 228   reldir="$$dir2"
 229 DIST_ARCHIVES = $(distdir).tar.gz
 230 GZIP_ENV = --best
 231 DIST_TARGETS = dist-gzip
 232 distuninstallcheck_listfiles = find . -type f -print
 233 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
 234   | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
 235 distcleancheck_listfiles = find . -type f -print
 236 A = @A@
 237 ACLOCAL = @ACLOCAL@
 238 AMTAR = @AMTAR@
 239 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 240 AR = @AR@
 241 ATF_BIN = @ATF_BIN@
 242 ATF_CFLAGS = @ATF_CFLAGS@
 243 ATF_LDFLAGS = @ATF_LDFLAGS@
 244 AUTOCONF = @AUTOCONF@
 245 AUTOHEADER = @AUTOHEADER@
 246 AUTOMAKE = @AUTOMAKE@
 247 AWK = @AWK@
 248 BINDCONFIG = @BINDCONFIG@
 249 BINDDIR = @BINDDIR@
 250 BINDIOMUX = @BINDIOMUX@
 251 BINDLIBDNSDIR = @BINDLIBDNSDIR@
 252 BINDLIBIRSDIR = @BINDLIBIRSDIR@
 253 BINDLIBISCCFGDIR = @BINDLIBISCCFGDIR@
 254 BINDLIBISCDIR = @BINDLIBISCDIR@
 255 BINDLT = @BINDLT@
 256 BINDSRCDIR = @BINDSRCDIR@
 257 BINDSUBDIR = @BINDSUBDIR@
 258 CC = @CC@
 259 CCDEPMODE = @CCDEPMODE@
 260 CFLAGS = @CFLAGS@
 261 CPP = @CPP@
 262 CPPFLAGS = @CPPFLAGS@
 263 CYGPATH_W = @CYGPATH_W@
 264 DEFS = @DEFS@
 265 DEPDIR = @DEPDIR@
 266 DHLIBS = @DHLIBS@
 267 DISTCHECK_ATF_CONFIGURE_FLAG = @DISTCHECK_ATF_CONFIGURE_FLAG@
 268 DISTCHECK_LIBBIND_CONFIGURE_FLAG = @DISTCHECK_LIBBIND_CONFIGURE_FLAG@
 269 DISTCHECK_LIBTOOL_CONFIGURE_FLAG = @DISTCHECK_LIBTOOL_CONFIGURE_FLAG@
 270 ECHO_C = @ECHO_C@
 271 ECHO_N = @ECHO_N@
 272 ECHO_T = @ECHO_T@
 273 EGREP = @EGREP@
 274 EXEEXT = @EXEEXT@
 275 GREP = @GREP@
 276 INSTALL = @INSTALL@
 277 INSTALL_DATA = @INSTALL_DATA@
 278 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 279 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 280 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 281 LDAP_CFLAGS = @LDAP_CFLAGS@
 282 LDAP_LIBS = @LDAP_LIBS@
 283 LDFLAGS = @LDFLAGS@
 284 LIBOBJS = @LIBOBJS@
 285 LIBS = @LIBS@
 286 LTLIBOBJS = @LTLIBOBJS@
 287 MAINT = @MAINT@
 288 MAKEINFO = @MAKEINFO@
 289 MKDIR_P = @MKDIR_P@
 290 OBJEXT = @OBJEXT@
 291 PACKAGE = @PACKAGE@
 292 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 293 PACKAGE_NAME = @PACKAGE_NAME@
 294 PACKAGE_STRING = @PACKAGE_STRING@
 295 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 296 PACKAGE_URL = @PACKAGE_URL@
 297 PACKAGE_VERSION = @PACKAGE_VERSION@
 298 PATH_SEPARATOR = @PATH_SEPARATOR@
 299 Q = @Q@
 300 RANLIB = @RANLIB@
 301 SET_MAKE = @SET_MAKE@
 302 SHELL = @SHELL@
 303 STRIP = @STRIP@
 304 VERSION = @VERSION@
 305 abs_builddir = @abs_builddir@
 306 abs_srcdir = @abs_srcdir@
 307 abs_top_builddir = @abs_top_builddir@
 308 abs_top_srcdir = @abs_top_srcdir@
 309 ac_ct_CC = @ac_ct_CC@
 310 ac_prefix_program = @ac_prefix_program@
 311 am__include = @am__include@
 312 am__leading_dot = @am__leading_dot@
 313 am__quote = @am__quote@
 314 am__tar = @am__tar@
 315 am__untar = @am__untar@
 316 bindir = @bindir@
 317 build = @build@
 318 build_alias = @build_alias@
 319 build_cpu = @build_cpu@
 320 build_os = @build_os@
 321 build_vendor = @build_vendor@
 322 builddir = @builddir@
 323 byte_order = @byte_order@
 324 datadir = @datadir@
 325 datarootdir = @datarootdir@
 326 docdir = @docdir@
 327 dvidir = @dvidir@
 328 exec_prefix = @exec_prefix@
 329 host = @host@
 330 host_alias = @host_alias@
 331 host_cpu = @host_cpu@
 332 host_os = @host_os@
 333 host_vendor = @host_vendor@
 334 htmldir = @htmldir@
 335 includedir = @includedir@
 336 infodir = @infodir@
 337 install_sh = @install_sh@
 338 libdir = @libdir@
 339 libexecdir = @libexecdir@
 340 localedir = @localedir@
 341 localstatedir = @localstatedir@
 342 mandir = @mandir@
 343 mkdir_p = @mkdir_p@
 344 oldincludedir = @oldincludedir@
 345 pdfdir = @pdfdir@
 346 pkgcfg_found = @pkgcfg_found@
 347 prefix = @prefix@
 348 program_transform_name = @program_transform_name@
 349 psdir = @psdir@
 350 sbindir = @sbindir@
 351 sharedstatedir = @sharedstatedir@
 352 srcdir = @srcdir@
 353 sysconfdir = @sysconfdir@
 354 target_alias = @target_alias@
 355 top_build_prefix = @top_build_prefix@
 356 top_builddir = @top_builddir@
 357 top_srcdir = @top_srcdir@
 358
 359 #
 360 # for libtool
 361 #
 362 ACLOCAL_AMFLAGS = -I m4
 363
 364 #
 365 # We have a lot of files that we want shipped with the distribution.
 366 #
 367 EXTRA_DIST = RELNOTES LICENSE configure.ac+lt config+lt \
 368         contrib/3.0b1-lease-convert contrib/dhclient-tz-exithook.sh \
 369         contrib/dhcp.spec contrib/sethostname.sh contrib/solaris.init \
 370         contrib/ms2isc/Registry.pm contrib/ms2isc/ms2isc.pl \
 371         contrib/ms2isc/readme.txt contrib/ldap/dhcpd-conf-to-ldap \
 372         contrib/ldap/dhcp.schema contrib/ldap/README.ldap \
 373         contrib/dhcp-lease-list.pl doc/BIND-libraries \
 374         doc/DHCPv4-over-DHCPv6 doc/IANA-arp-parameters doc/Makefile \
 375         doc/References.html doc/References.txt doc/References.xml \
 376         doc/api+protocol doc/ja_JP.eucJP/dhclient-script.8 \
 377         doc/ja_JP.eucJP/dhclient.8 doc/ja_JP.eucJP/dhclient.conf.5 \
 378         doc/ja_JP.eucJP/dhclient.leases.5 doc/ja_JP.eucJP/dhcp-eval.5 \
 379         doc/ja_JP.eucJP/dhcp-options.5 \
 380         doc/examples/dhclient-dhcpv6.conf \
 381         doc/examples/dhcpd-dhcpv6.conf doc/devel/arch.dox \
 382         doc/devel/atf.dox doc/devel/contrib.dox doc/devel/debug.dox \
 383         doc/devel/isc-logo.jpg doc/devel/libtool.dox \
 384         doc/devel/mainpage.dox doc/devel/omapi.dox doc/devel/qa.dox \
 385         common/tests/Atffile server/tests/Atffile $(am__append_1)
 386
 387 # Use an autoconf substitution vs an automake conditional here
 388 # to fool automake when the bind directory does not exist.
 389 SUBDIRS = @BINDSUBDIR@ includes tests common omapip client dhcpctl relay server
 390 nobase_include_HEADERS = dhcpctl/dhcpctl.h
 391
 392 #
 393 # distcheck tuning
 394 #
 395 DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_ATF_CONFIGURE_FLAG@ \
 396         @DISTCHECK_LIBBIND_CONFIGURE_FLAG@ \
 397         @DISTCHECK_LIBTOOL_CONFIGURE_FLAG@ $(am__empty)
 398 all: all-recursive
 399
 400 .SUFFIXES:
 401 am--refresh: Makefile
 402         @:
 403 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 404         @for dep in $?; do \
 405           case '$(am__configure_deps)' in \
 406             *$$dep*) \
 407               echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
 408               $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
 409                 && exit 0; \
 410               exit 1;; \
 411           esac; \
 412         done; \
 413         echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
 414         $(am__cd) $(top_srcdir) && \
 415           $(AUTOMAKE) --foreign Makefile
 416
 417 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 418         $(SHELL) ./config.status --recheck
 419
 420 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 421         $(am__cd) $(srcdir) && $(AUTOCONF)
 422 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 423         $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
 424 $(am__aclocal_m4_deps):
 425 doc/devel/doxyfile: $(top_builddir)/config.status $(top_srcdir)/doc/devel/doxyfile.in
 426         cd $(top_builddir) && $(SHELL) ./config.status $@
 427 install-nobase_includeHEADERS: $(nobase_include_HEADERS)
 428         @$(NORMAL_INSTALL)
 429         @list='$(nobase_include_HEADERS)'; test -n "$(includedir)" || list=; \
 430         if test -n "$$list"; then \
 431           echo " $(MKDIR_P) '$(DESTDIR)$(includedir)'"; \
 432           $(MKDIR_P) "$(DESTDIR)$(includedir)" || exit 1; \
 433         fi; \
 434         $(am__nobase_list) | while read dir files; do \
 435           xfiles=; for file in $$files; do \
 436             if test -f "$$file"; then xfiles="$$xfiles $$file"; \
 437             else xfiles="$$xfiles $(srcdir)/$$file"; fi; done; \
 438           test -z "$$xfiles" || { \
 439             test "x$$dir" = x. || { \
 440               echo " $(MKDIR_P) '$(DESTDIR)$(includedir)/$$dir'"; \
 441               $(MKDIR_P) "$(DESTDIR)$(includedir)/$$dir"; }; \
 442             echo " $(INSTALL_HEADER) $$xfiles '$(DESTDIR)$(includedir)/$$dir'"; \
 443             $(INSTALL_HEADER) $$xfiles "$(DESTDIR)$(includedir)/$$dir" || exit $$?; }; \
 444         done
 445
 446 uninstall-nobase_includeHEADERS:
 447         @$(NORMAL_UNINSTALL)
 448         @list='$(nobase_include_HEADERS)'; test -n "$(includedir)" || list=; \
 449         $(am__nobase_strip_setup); files=`$(am__nobase_strip)`; \
 450         dir='$(DESTDIR)$(includedir)'; $(am__uninstall_files_from_dir)
 451
 452 # This directory's subdirectories are mostly independent; you can cd
 453 # into them and run 'make' without going through this Makefile.
 454 # To change the values of 'make' variables: instead of editing Makefiles,
 455 # (1) if the variable is set in 'config.status', edit 'config.status'
 456 #     (which will cause the Makefiles to be regenerated when you run 'make');
 457 # (2) otherwise, pass the desired values on the 'make' command line.
 458 $(am__recursive_targets):
 459         @fail=; \
 460         if $(am__make_keepgoing); then \
 461           failcom='fail=yes'; \
 462         else \
 463           failcom='exit 1'; \
 464         fi; \
 465         dot_seen=no; \
 466         target=`echo $@ | sed s/-recursive//`; \
 467         case "$@" in \
 468           distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
 469           *) list='$(SUBDIRS)' ;; \
 470         esac; \
 471         for subdir in $$list; do \
 472           echo "Making $$target in $$subdir"; \
 473           if test "$$subdir" = "."; then \
 474             dot_seen=yes; \
 475             local_target="$$target-am"; \
 476           else \
 477             local_target="$$target"; \
 478           fi; \
 479           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 480           || eval $$failcom; \
 481         done; \
 482         if test "$$dot_seen" = "no"; then \
 483           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 484         fi; test -z "$$fail"
 485
 486 ID: $(am__tagged_files)
 487         $(am__define_uniq_tagged_files); mkid -fID $$unique
 488 tags: tags-recursive
 489 TAGS: tags
 490
 491 tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 492         set x; \
 493         here=`pwd`; \
 494         if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 495           include_option=--etags-include; \
 496           empty_fix=.; \
 497         else \
 498           include_option=--include; \
 499           empty_fix=; \
 500         fi; \
 501         list='$(SUBDIRS)'; for subdir in $$list; do \
 502           if test "$$subdir" = .; then :; else \
 503             test ! -f $$subdir/TAGS || \
 504               set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 505           fi; \
 506         done; \
 507         $(am__define_uniq_tagged_files); \
 508         shift; \
 509         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 510           test -n "$$unique" || unique=$$empty_fix; \
 511           if test $$# -gt 0; then \
 512             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 513               "$$@" $$unique; \
 514           else \
 515             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 516               $$unique; \
 517           fi; \
 518         fi
 519 ctags: ctags-recursive
 520
 521 CTAGS: ctags
 522 ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 523         $(am__define_uniq_tagged_files); \
 524         test -z "$(CTAGS_ARGS)$$unique" \
 525           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 526              $$unique
 527
 528 GTAGS:
 529         here=`$(am__cd) $(top_builddir) && pwd` \
 530           && $(am__cd) $(top_srcdir) \
 531           && gtags -i $(GTAGS_ARGS) "$$here"
 532 cscope: cscope.files
 533         test ! -s cscope.files \
 534           || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
 535 clean-cscope:
 536         -rm -f cscope.files
 537 cscope.files: clean-cscope cscopelist
 538 cscopelist: cscopelist-recursive
 539
 540 cscopelist-am: $(am__tagged_files)
 541         list='$(am__tagged_files)'; \
 542         case "$(srcdir)" in \
 543           [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
 544           *) sdir=$(subdir)/$(srcdir) ;; \
 545         esac; \
 546         for i in $$list; do \
 547           if test -f "$$i"; then \
 548             echo "$(subdir)/$$i"; \
 549           else \
 550             echo "$$sdir/$$i"; \
 551           fi; \
 552         done >> $(top_builddir)/cscope.files
 553
 554 distclean-tags:
 555         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 556         -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
 557
 558 distdir: $(DISTFILES)
 559         $(am__remove_distdir)
 560         test -d "$(distdir)" || mkdir "$(distdir)"
 561         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 562         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 563         list='$(DISTFILES)'; \
 564           dist_files=`for file in $$list; do echo $$file; done | \
 565           sed -e "s|^$$srcdirstrip/||;t" \
 566               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 567         case $$dist_files in \
 568           */*) $(MKDIR_P) `echo "$$dist_files" | \
 569                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 570                            sort -u` ;; \
 571         esac; \
 572         for file in $$dist_files; do \
 573           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 574           if test -d $$d/$$file; then \
 575             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 576             if test -d "$(distdir)/$$file"; then \
 577               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 578             fi; \
 579             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 580               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
 581               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 582             fi; \
 583             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 584           else \
 585             test -f "$(distdir)/$$file" \
 586             || cp -p $$d/$$file "$(distdir)/$$file" \
 587             || exit 1; \
 588           fi; \
 589         done
 590         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 591           if test "$$subdir" = .; then :; else \
 592             $(am__make_dryrun) \
 593               || test -d "$(distdir)/$$subdir" \
 594               || $(MKDIR_P) "$(distdir)/$$subdir" \
 595               || exit 1; \
 596             dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
 597             $(am__relativize); \
 598             new_distdir=$$reldir; \
 599             dir1=$$subdir; dir2="$(top_distdir)"; \
 600             $(am__relativize); \
 601             new_top_distdir=$$reldir; \
 602             echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
 603             echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
 604             ($(am__cd) $$subdir && \
 605               $(MAKE) $(AM_MAKEFLAGS) \
 606                 top_distdir="$$new_top_distdir" \
 607                 distdir="$$new_distdir" \
 608                 am__remove_distdir=: \
 609                 am__skip_length_check=: \
 610                 am__skip_mode_fix=: \
 611                 distdir) \
 612               || exit 1; \
 613           fi; \
 614         done
 615         -test -n "$(am__skip_mode_fix)" \
 616         || find "$(distdir)" -type d ! -perm -755 \
 617                 -exec chmod u+rwx,go+rx {} \; -o \
 618           ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
 619           ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
 620           ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
 621         || chmod -R a+r "$(distdir)"
 622 dist-gzip: distdir
 623         tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
 624         $(am__post_remove_distdir)
 625
 626 dist-bzip2: distdir
 627         tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
 628         $(am__post_remove_distdir)
 629
 630 dist-lzip: distdir
 631         tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
 632         $(am__post_remove_distdir)
 633
 634 dist-xz: distdir
 635         tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
 636         $(am__post_remove_distdir)
 637
 638 dist-tarZ: distdir
 639         @echo WARNING: "Support for distribution archives compressed with" \
 640                        "legacy program 'compress' is deprecated." >&2
 641         @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
 642         tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
 643         $(am__post_remove_distdir)
 644
 645 dist-shar: distdir
 646         @echo WARNING: "Support for shar distribution archives is" \
 647                        "deprecated." >&2
 648         @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
 649         shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
 650         $(am__post_remove_distdir)
 651
 652 dist-zip: distdir
 653         -rm -f $(distdir).zip
 654         zip -rq $(distdir).zip $(distdir)
 655         $(am__post_remove_distdir)
 656
 657 dist dist-all:
 658         $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
 659         $(am__post_remove_distdir)
 660
 661 # This target untars the dist file and tries a VPATH configuration.  Then
 662 # it guarantees that the distribution is self-contained by making another
 663 # tarfile.
 664 distcheck: dist
 665         case '$(DIST_ARCHIVES)' in \
 666         *.tar.gz*) \
 667           GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
 668         *.tar.bz2*) \
 669           bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
 670         *.tar.lz*) \
 671           lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
 672         *.tar.xz*) \
 673           xz -dc $(distdir).tar.xz | $(am__untar) ;;\
 674         *.tar.Z*) \
 675           uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
 676         *.shar.gz*) \
 677           GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
 678         *.zip*) \
 679           unzip $(distdir).zip ;;\
 680         esac
 681         chmod -R a-w $(distdir)
 682         chmod u+w $(distdir)
 683         mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
 684         chmod a-w $(distdir)
 685         test -d $(distdir)/_build || exit 0; \
 686         dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
 687           && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
 688           && $(MAKE) $(AM_MAKEFLAGS) distcheck-hook \
 689           && am__cwd=`pwd` \
 690           && $(am__cd) $(distdir)/_build/sub \
 691           && ../../configure \
 692             $(AM_DISTCHECK_CONFIGURE_FLAGS) \
 693             $(DISTCHECK_CONFIGURE_FLAGS) \
 694             --srcdir=../.. --prefix="$$dc_install_base" \
 695           && $(MAKE) $(AM_MAKEFLAGS) \
 696           && $(MAKE) $(AM_MAKEFLAGS) dvi \
 697           && $(MAKE) $(AM_MAKEFLAGS) check \
 698           && $(MAKE) $(AM_MAKEFLAGS) install \
 699           && $(MAKE) $(AM_MAKEFLAGS) installcheck \
 700           && $(MAKE) $(AM_MAKEFLAGS) uninstall \
 701           && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
 702                 distuninstallcheck \
 703           && chmod -R a-w "$$dc_install_base" \
 704           && ({ \
 705                (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
 706                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
 707                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
 708                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
 709                     distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
 710               } || { rm -rf "$$dc_destdir"; exit 1; }) \
 711           && rm -rf "$$dc_destdir" \
 712           && $(MAKE) $(AM_MAKEFLAGS) dist \
 713           && rm -rf $(DIST_ARCHIVES) \
 714           && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
 715           && cd "$$am__cwd" \
 716           || exit 1
 717         $(am__post_remove_distdir)
 718         @(echo "$(distdir) archives ready for distribution: "; \
 719           list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
 720           sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
 721 distuninstallcheck:
 722         @test -n '$(distuninstallcheck_dir)' || { \
 723           echo 'ERROR: trying to run $@ with an empty' \
 724                '$$(distuninstallcheck_dir)' >&2; \
 725           exit 1; \
 726         }; \
 727         $(am__cd) '$(distuninstallcheck_dir)' || { \
 728           echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
 729           exit 1; \
 730         }; \
 731         test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
 732            || { echo "ERROR: files left after uninstall:" ; \
 733                 if test -n "$(DESTDIR)"; then \
 734                   echo "  (check DESTDIR support)"; \
 735                 fi ; \
 736                 $(distuninstallcheck_listfiles) ; \
 737                 exit 1; } >&2
 738 distcleancheck: distclean
 739         @if test '$(srcdir)' = . ; then \
 740           echo "ERROR: distcleancheck can only run from a VPATH build" ; \
 741           exit 1 ; \
 742         fi
 743         @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
 744           || { echo "ERROR: files left in build directory after distclean:" ; \
 745                $(distcleancheck_listfiles) ; \
 746                exit 1; } >&2
 747 check-am: all-am
 748 check: check-recursive
 749 all-am: Makefile $(HEADERS)
 750 installdirs: installdirs-recursive
 751 installdirs-am:
 752         for dir in "$(DESTDIR)$(includedir)"; do \
 753           test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 754         done
 755 install: install-recursive
 756 install-exec: install-exec-recursive
 757 install-data: install-data-recursive
 758 uninstall: uninstall-recursive
 759
 760 install-am: all-am
 761         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 762
 763 installcheck: installcheck-recursive
 764 install-strip:
 765         if test -z '$(STRIP)'; then \
 766           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 767             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 768               install; \
 769         else \
 770           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 771             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 772             "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
 773         fi
 774 mostlyclean-generic:
 775
 776 clean-generic:
 777
 778 distclean-generic:
 779         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 780         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 781
 782 maintainer-clean-generic:
 783         @echo "This command is intended for maintainers to use"
 784         @echo "it deletes files that may require special tools to rebuild."
 785 clean: clean-recursive
 786
 787 clean-am: clean-generic mostlyclean-am
 788
 789 distclean: distclean-recursive
 790         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
 791         -rm -f Makefile
 792 distclean-am: clean-am distclean-generic distclean-local \
 793         distclean-tags
 794
 795 dvi: dvi-recursive
 796
 797 dvi-am:
 798
 799 html: html-recursive
 800
 801 html-am:
 802
 803 info: info-recursive
 804
 805 info-am:
 806
 807 install-data-am: install-nobase_includeHEADERS
 808
 809 install-dvi: install-dvi-recursive
 810
 811 install-dvi-am:
 812
 813 install-exec-am:
 814
 815 install-html: install-html-recursive
 816
 817 install-html-am:
 818
 819 install-info: install-info-recursive
 820
 821 install-info-am:
 822
 823 install-man:
 824
 825 install-pdf: install-pdf-recursive
 826
 827 install-pdf-am:
 828
 829 install-ps: install-ps-recursive
 830
 831 install-ps-am:
 832
 833 installcheck-am:
 834
 835 maintainer-clean: maintainer-clean-recursive
 836         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
 837         -rm -rf $(top_srcdir)/autom4te.cache
 838         -rm -f Makefile
 839 maintainer-clean-am: distclean-am maintainer-clean-generic
 840
 841 mostlyclean: mostlyclean-recursive
 842
 843 mostlyclean-am: mostlyclean-generic
 844
 845 pdf: pdf-recursive
 846
 847 pdf-am:
 848
 849 ps: ps-recursive
 850
 851 ps-am:
 852
 853 uninstall-am: uninstall-nobase_includeHEADERS
 854
 855 .MAKE: $(am__recursive_targets) install-am install-strip
 856
 857 .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
 858         am--refresh check check-am clean clean-cscope clean-generic \
 859         cscope cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
 860         dist-gzip dist-lzip dist-shar dist-tarZ dist-xz dist-zip \
 861         distcheck distclean distclean-generic distclean-local \
 862         distclean-tags distcleancheck distdir distuninstallcheck dvi \
 863         dvi-am html html-am info info-am install install-am \
 864         install-data install-data-am install-dvi install-dvi-am \
 865         install-exec install-exec-am install-html install-html-am \
 866         install-info install-info-am install-man \
 867         install-nobase_includeHEADERS install-pdf install-pdf-am \
 868         install-ps install-ps-am install-strip installcheck \
 869         installcheck-am installdirs installdirs-am maintainer-clean \
 870         maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
 871         pdf-am ps ps-am tags tags-am uninstall uninstall-am \
 872         uninstall-nobase_includeHEADERS
 873
 874 .PRECIOUS: Makefile
 875
 876
 877 #
 878 # automake adds dependencies that we don't like, so we explicitly remove them
 879 #
 880 Makefile:
 881
 882 distcheck-hook:
 883 @HAVE_BINDDIR_TRUE@     chmod u+w $(distdir)/bind
 884
 885 distclean-local:
 886         rm -f config.report
 887
 888 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 889 # Otherwise a system limit (for SysV at least) may be exceeded.
 890 .NOEXPORT: