1 - Added support for IKEv2 make-before-break reauthentication. By using a global
2 CHILD_SA reqid allocation mechanism, charon supports overlapping CHILD_SAs.
3 This allows the use of make-before-break instead of the previously supported
4 break-before-make reauthentication, avoiding connectivity gaps during that
5 procedure. As the new mechanism may fail with peers not supporting it (such
6 as any previous strongSwan release) it must be explicitly enabled using
7 the charon.make_before_break strongswan.conf option.
13 - Fixed a denial-of-service vulnerability triggered by an IKEv2 Key Exchange
14 payload that contains the Diffie-Hellman group 1025. This identifier was
15 used internally for DH groups with custom generator and prime. Because
16 these arguments are missing when creating DH objects based on the KE payload
17 an invalid pointer dereference occurred. This allowed an attacker to crash
18 the IKE daemon with a single IKE_SA_INIT message containing such a KE
19 payload. The vulnerability has been registered as CVE-2014-9221.
21 - The left/rightid options in ipsec.conf, or any other identity in strongSwan,
22 now accept prefixes to enforce an explicit type, such as email: or fqdn:.
23 Note that no conversion is done for the remaining string, refer to
24 ipsec.conf(5) for details.
26 - The post-quantum Bimodal Lattice Signature Scheme (BLISS) can be used as
27 an IKEv2 public key authentication method. The pki tool offers full support
28 for the generation of BLISS key pairs and certificates.
30 - Fixed mapping of integrity algorithms negotiated for AH via IKEv1. This could
31 cause interoperability issues when connecting to older versions of charon.
37 - The new charon-systemd IKE daemon implements an IKE daemon tailored for use
38 with systemd. It avoids the dependency on ipsec starter and uses swanctl
39 as configuration backend, building a simple and lightweight solution. It
40 supports native systemd journal logging.
42 - Support for IKEv2 fragmentation as per RFC 7383 has been added. Like IKEv1
43 fragmentation it can be enabled by setting fragmentation=yes in ipsec.conf.
45 - Support of the TCG TNC IF-M Attribute Segmentation specification proposal.
46 All attributes can be segmented. Additionally TCG/SWID Tag, TCG/SWID Tag ID
47 and IETF/Installed Packages attributes can be processed incrementally on a
50 - The new ext-auth plugin calls an external script to implement custom IKE_SA
51 authorization logic, courtesy of Vyronas Tsingaras.
53 - For the vici plugin a ruby gem has been added to allow ruby applications
54 to control or monitor the IKE daemon. The vici documentation has been updated
55 to include a description of the available operations and some simple examples
56 using both the libvici C interface and the ruby gem.
62 - strongSwan has been ported to the Windows platform. Using a MinGW toolchain,
63 many parts of the strongSwan codebase run natively on Windows 7 / 2008 R2
64 and newer releases. charon-svc implements a Windows IKE service based on
65 libcharon, the kernel-iph and kernel-wfp plugins act as networking and IPsec
66 backend on the Windows platform. socket-win provides a native IKE socket
67 implementation, while winhttp fetches CRL and OCSP information using the
70 - The new vici plugin provides a Versatile IKE Configuration Interface for
71 charon. Using the stable IPC interface, external applications can configure,
72 control and monitor the IKE daemon. Instead of scripting the ipsec tool
73 and generating ipsec.conf, third party applications can use the new interface
74 for more control and better reliability.
76 - Built upon the libvici client library, swanctl implements the first user of
77 the VICI interface. Together with a swanctl.conf configuration file,
78 connections can be defined, loaded and managed. swanctl provides a portable,
79 complete IKE configuration and control interface for the command line.
80 The first six swanctl example scenarios have been added.
82 - The SWID IMV implements a JSON-based REST API which allows the exchange
83 of SWID tags and Software IDs with the strongTNC policy manager.
85 - The SWID IMC can extract all installed packages from the dpkg (Debian,
86 Ubuntu, Linux Mint etc.), rpm (Fedora, RedHat, OpenSUSE, etc.), or
87 pacman (Arch Linux, Manjaro, etc.) package managers, respectively, using the
88 swidGenerator (https://github.com/strongswan/swidGenerator) which generates
89 SWID tags according to the new ISO/IEC 19770-2:2014 standard.
91 - All IMVs now share the access requestor ID, device ID and product info
92 of an access requestor via a common imv_session object.
94 - The Attestation IMC/IMV pair supports the IMA-NG measurement format
95 introduced with the Linux 3.13 kernel.
97 - The aikgen tool generates an Attestation Identity Key bound to a TPM.
99 - Implemented the PT-EAP transport protocol (RFC 7171) for Trusted Network
102 - The ipsec.conf replay_window option defines connection specific IPsec replay
103 windows. Original patch courtesy of Zheng Zhong and Christophe Gouault from
110 - Fixed an authentication bypass vulnerability triggered by rekeying an
111 unestablished IKEv2 SA while it gets actively initiated. This allowed an
112 attacker to trick a peer's IKE_SA state to established, without the need to
113 provide any valid authentication credentials. The vulnerability has been
114 registered as CVE-2014-2338.
116 - The acert plugin evaluates X.509 Attribute Certificates. Group membership
117 information encoded as strings can be used to fulfill authorization checks
118 defined with the rightgroups option. Attribute Certificates can be loaded
119 locally or get exchanged in IKEv2 certificate payloads.
121 - The pki command gained support to generate X.509 Attribute Certificates
122 using the --acert subcommand, while the --print command supports the ac type.
123 The openac utility has been removed in favor of the new pki functionality.
125 - The libtls TLS 1.2 implementation as used by EAP-(T)TLS and other protocols
126 has been extended by AEAD mode support, currently limited to AES-GCM.
132 - A new default configuration file layout is introduced. The new default
133 strongswan.conf file mainly includes config snippets from the strongswan.d
134 and strongswan.d/charon directories (the latter containing snippets for all
135 plugins). The snippets, with commented defaults, are automatically
136 generated and installed, if they don't exist yet. They are also installed
137 in $prefix/share/strongswan/templates so existing files can be compared to
138 the current defaults.
140 - As an alternative to the non-extensible charon.load setting, the plugins
141 to load in charon (and optionally other applications) can now be determined
142 via the charon.plugins.<name>.load setting for each plugin (enabled in the
143 new default strongswan.conf file via the charon.load_modular option).
144 The load setting optionally takes a numeric priority value that allows
145 reordering the plugins (otherwise the default plugin order is preserved).
147 - All strongswan.conf settings that were formerly defined in library specific
148 "global" sections are now application specific (e.g. settings for plugins in
149 libstrongswan.plugins can now be set only for charon in charon.plugins).
150 The old options are still supported, which now allows to define defaults for
151 all applications in the libstrongswan section.
153 - The ntru libstrongswan plugin supports NTRUEncrypt as a post-quantum
154 computer IKE key exchange mechanism. The implementation is based on the
155 ntru-crypto library from the NTRUOpenSourceProject. The supported security
156 strengths are ntru112, ntru128, ntru192, and ntru256. Since the private DH
157 group IDs 1030..1033 have been assigned, the strongSwan Vendor ID must be
158 sent (charon.send_vendor_id = yes) in order to use NTRU.
160 - Defined a TPMRA remote attestation workitem and added support for it to the
163 - Compatibility issues between IPComp (compress=yes) and leftfirewall=yes as
164 well as multiple subnets in left|rightsubnet have been fixed.
166 - When enabling its "session" strongswan.conf option, the xauth-pam plugin opens
167 and closes a PAM session for each established IKE_SA. Patch courtesy of
170 - The strongSwan unit testing framework has been rewritten without the "check"
171 dependency for improved flexibility and portability. It now properly supports
172 multi-threaded and memory leak testing and brings a bunch of new test cases.
178 - Fixed a denial-of-service vulnerability and potential authorization bypass
179 triggered by a crafted ID_DER_ASN1_DN ID payload. The cause is an insufficient
180 length check when comparing such identities. The vulnerability has been
181 registered as CVE-2013-6075.
183 - Fixed a denial-of-service vulnerability triggered by a crafted IKEv1
184 fragmentation payload. The cause is a NULL pointer dereference. The
185 vulnerability has been registered as CVE-2013-6076.
187 - The lean stand-alone pt-tls-client can set up a RFC 6876 PT-TLS session
188 with a strongSwan policy enforcement point which uses the tnc-pdp charon
191 - The new TCG TNC SWID IMC/IMV pair supports targeted SWID requests for either
192 full SWID Tag or concise SWID Tag ID inventories.
194 - The XAuth backend in eap-radius now supports multiple XAuth exchanges for
195 different credential types and display messages. All user input gets
196 concatenated and verified with a single User-Password RADIUS attribute on
197 the AAA. With an AAA supporting it, one for example can implement
198 Password+Token authentication with proper dialogs on iOS and OS X clients.
200 - charon supports IKEv1 Mode Config exchange in push mode. The ipsec.conf
201 modeconfig=push option enables it for both client and server, the same way
204 - Using the "ah" ipsec.conf keyword on both IKEv1 and IKEv2 connections,
205 charon can negotiate and install Security Associations integrity-protected by
206 the Authentication Header protocol. Supported are plain AH(+IPComp) SAs only,
207 but not the deprecated RFC2401 style ESP+AH bundles.
209 - The generation of initialization vectors for IKE and ESP (when using libipsec)
210 is now modularized and IVs for e.g. AES-GCM are now correctly allocated
211 sequentially, while other algorithms like AES-CBC still use random IVs.
213 - The left and right options in ipsec.conf can take multiple address ranges
214 and subnets. This allows connection matching against a larger set of
215 addresses, for example to use a different connection for clients connecting
216 from a internal network.
218 - For all those who have a queasy feeling about the NIST elliptic curve set,
219 the Brainpool curves introduced for use with IKE by RFC 6932 might be a
220 more trustworthy alternative.
222 - The kernel-libipsec userland IPsec backend now supports usage statistics,
223 volume based rekeying and accepts ESPv3 style TFC padded packets.
225 - With two new strongswan.conf options fwmarks can be used to implement
226 host-to-host tunnels with kernel-libipsec.
228 - load-tester supports transport mode connections and more complex traffic
229 selectors, including such using unique ports for each tunnel.
231 - The new dnscert plugin provides support for authentication via CERT RRs that
232 are protected via DNSSEC. The plugin was created by Ruslan N. Marchenko.
234 - The eap-radius plugin supports forwarding of several Cisco Unity specific
235 RADIUS attributes in corresponding configuration payloads.
237 - Database transactions are now abstracted and implemented by the two backends.
238 If you use MySQL make sure all tables use the InnoDB engine.
240 - libstrongswan now can provide an experimental custom implementation of the
241 printf family functions based on klibc if neither Vstr nor glibc style printf
242 hooks are available. This can avoid the Vstr dependency on some systems at
243 the cost of slower and less complete printf functions.
249 - Fixed a denial-of-service vulnerability triggered by specific XAuth usernames
250 and EAP identities (since 5.0.3), and PEM files (since 4.1.11). The crash
251 was caused by insufficient error handling in the is_asn1() function.
252 The vulnerability has been registered as CVE-2013-5018.
254 - The new charon-cmd command line IKE client can establish road warrior
255 connections using IKEv1 or IKEv2 with different authentication profiles.
256 It does not depend on any configuration files and can be configured using a
257 few simple command line options.
259 - The kernel-pfroute networking backend has been greatly improved. It now
260 can install virtual IPs on TUN devices on OS X and FreeBSD, allowing these
261 systems to act as a client in common road warrior scenarios.
263 - The new kernel-libipsec plugin uses TUN devices and libipsec to provide IPsec
264 processing in userland on Linux, FreeBSD and Mac OS X.
266 - The eap-radius plugin can now serve as an XAuth backend called xauth-radius,
267 directly verifying XAuth credentials using RADIUS User-Name/User-Password
268 attributes. This is more efficient than the existing xauth-eap+eap-radius
269 combination, and allows RADIUS servers without EAP support to act as AAA
272 - The new osx-attr plugin installs configuration attributes (currently DNS
273 servers) via SystemConfiguration on Mac OS X. The keychain plugin provides
274 certificates from the OS X keychain service.
276 - The sshkey plugin parses SSH public keys, which, together with the --agent
277 option for charon-cmd, allows the use of ssh-agent for authentication.
278 To configure SSH keys in ipsec.conf the left|rightrsasigkey options are
279 replaced with left|rightsigkey, which now take public keys in one of three
280 formats: SSH (RFC 4253, ssh: prefix), DNSKEY (RFC 3110, dns: prefix), and
281 PKCS#1 (the default, no prefix).
283 - Extraction of certificates and private keys from PKCS#12 files is now provided
284 by the new pkcs12 plugin or the openssl plugin. charon-cmd (--p12) as well
285 as charon (via P12 token in ipsec.secrets) can make use of this.
287 - IKEv2 can now negotiate transport mode and IPComp in NAT situations.
289 - IKEv2 exchange initiators now properly close an established IKE or CHILD_SA
290 on error conditions using an additional exchange, keeping state in sync
293 - Using a SQL database interface a Trusted Network Connect (TNC) Policy Manager
294 can generate specific measurement workitems for an arbitrary number of
295 Integrity Measurement Verifiers (IMVs) based on the history of the VPN user
298 - Several core classes in libstrongswan are now tested with unit tests. These
299 can be enabled with --enable-unit-tests and run with 'make check'. Coverage
300 reports can be generated with --enable-coverage and 'make coverage' (this
301 disables any optimization, so it should not be enabled when building
302 production releases).
304 - The leak-detective developer tool has been greatly improved. It works much
305 faster/stabler with multiple threads, does not use deprecated malloc hooks
306 anymore and has been ported to OS X.
308 - chunk_hash() is now based on SipHash-2-4 with a random key. This provides
309 better distribution and prevents hash flooding attacks when used with
312 - All default plugins implement the get_features() method to define features
313 and their dependencies. The plugin loader has been improved, so that plugins
314 in a custom load statement can be ordered freely or to express preferences
315 without being affected by dependencies between plugin features.
317 - A centralized thread can take care for watching multiple file descriptors
318 concurrently. This removes the need for a dedicated listener threads in
319 various plugins. The number of "reserved" threads for such tasks has been
320 reduced to about five, depending on the plugin configuration.
322 - Plugins that can be controlled by a UNIX socket IPC mechanism gained network
323 transparency. Third party applications querying these plugins now can use
324 TCP connections from a different host.
326 - libipsec now supports AES-GCM.
332 - Fixed a security vulnerability in the openssl plugin which was reported by
333 Kevin Wojtysiak. The vulnerability has been registered as CVE-2013-2944.
334 Before the fix, if the openssl plugin's ECDSA signature verification was used,
335 due to a misinterpretation of the error code returned by the OpenSSL
336 ECDSA_verify() function, an empty or zeroed signature was accepted as a
339 - The handling of a couple of other non-security relevant openssl return codes
342 - The tnc_ifmap plugin now publishes virtual IPv4 and IPv6 addresses via its
343 TCG TNC IF-MAP 2.1 interface.
345 - The charon.initiator_only option causes charon to ignore IKE initiation
348 - The openssl plugin can now use the openssl-fips library.
354 - The new ipseckey plugin enables authentication based on trustworthy public
355 keys stored as IPSECKEY resource records in the DNS and protected by DNSSEC.
356 To do so it uses a DNSSEC enabled resolver, like the one provided by the new
357 unbound plugin, which is based on libldns and libunbound. Both plugins were
358 created by Reto Guadagnini.
360 - Implemented the TCG TNC IF-IMV 1.4 draft making access requestor identities
361 available to an IMV. The OS IMV stores the AR identity together with the
362 device ID in the attest database.
364 - The openssl plugin now uses the AES-NI accelerated version of AES-GCM
365 if the hardware supports it.
367 - The eap-radius plugin can now assign virtual IPs to IKE clients using the
368 Framed-IP-Address attribute by using the "%radius" named pool in the
369 rightsourceip ipsec.conf option. Cisco Banner attributes are forwarded to
370 Unity-capable IKEv1 clients during mode config. charon now sends Interim
371 Accounting updates if requested by the RADIUS server, reports
372 sent/received packets in Accounting messages, and adds a Terminate-Cause
375 - The recently introduced "ipsec listcounters" command can report connection
376 specific counters by passing a connection name, and global or connection
377 counters can be reset by the "ipsec resetcounters" command.
379 - The strongSwan libpttls library provides an experimental implementation of
380 PT-TLS (RFC 6876), a Posture Transport Protocol over TLS.
382 - The charon systime-fix plugin can disable certificate lifetime checks on
383 embedded systems if the system time is obviously out of sync after bootup.
384 Certificates lifetimes get checked once the system time gets sane, closing
385 or reauthenticating connections using expired certificates.
387 - The "ikedscp" ipsec.conf option can set DiffServ code points on outgoing
390 - The new xauth-noauth plugin allows to use basic RSA or PSK authentication with
391 clients that cannot be configured without XAuth authentication. The plugin
392 simply concludes the XAuth exchange successfully without actually performing
393 any authentication. Therefore, to use this backend it has to be selected
394 explicitly with rightauth2=xauth-noauth.
396 - The new charon-tkm IKEv2 daemon delegates security critical operations to a
397 separate process. This has the benefit that the network facing daemon has no
398 knowledge of keying material used to protect child SAs. Thus subverting
399 charon-tkm does not result in the compromise of cryptographic keys.
400 The extracted functionality has been implemented from scratch in a minimal TCB
401 (trusted computing base) in the Ada programming language. Further information
402 can be found at http://www.codelabs.ch/tkm/.
407 - Implemented all IETF Standard PA-TNC attributes and an OS IMC/IMV
408 pair using them to transfer operating system information.
410 - The new "ipsec listcounters" command prints a list of global counter values
411 about received and sent IKE messages and rekeyings.
413 - A new lookip plugin can perform fast lookup of tunnel information using a
414 clients virtual IP and can send notifications about established or deleted
415 tunnels. The "ipsec lookip" command can be used to query such information
416 or receive notifications.
418 - The new error-notify plugin catches some common error conditions and allows
419 an external application to receive notifications for them over a UNIX socket.
421 - IKE proposals can now use a PRF algorithm different to that defined for
422 integrity protection. If an algorithm with a "prf" prefix is defined
423 explicitly (such as prfsha1 or prfsha256), no implicit PRF algorithm based on
424 the integrity algorithm is added to the proposal.
426 - The pkcs11 plugin can now load leftcert certificates from a smartcard for a
427 specific ipsec.conf conn section and cacert CA certificates for a specific ca
430 - The load-tester plugin gained additional options for certificate generation
431 and can load keys and multiple CA certificates from external files. It can
432 install a dedicated outer IP address for each tunnel and tunnel initiation
433 batches can be triggered and monitored externally using the
434 "ipsec load-tester" tool.
436 - PKCS#7 container parsing has been modularized, and the openssl plugin
437 gained an alternative implementation to decrypt and verify such files.
438 In contrast to our own DER parser, OpenSSL can handle BER files, which is
439 required for interoperability of our scepclient with EJBCA.
441 - Support for the proprietary IKEv1 fragmentation extension has been added.
442 Fragments are always handled on receipt but only sent if supported by the peer
443 and if enabled with the new fragmentation ipsec.conf option.
445 - IKEv1 in charon can now parse certificates received in PKCS#7 containers and
446 supports NAT traversal as used by Windows clients. Patches courtesy of
449 - The new rdrand plugin provides a high quality / high performance random
450 source using the Intel rdrand instruction found on Ivy Bridge processors.
452 - The integration test environment was updated and now uses KVM and reproducible
453 guest images based on Debian.
459 - Introduced the sending of the standard IETF Assessment Result
460 PA-TNC attribute by all strongSwan Integrity Measurement Verifiers.
462 - Extended PTS Attestation IMC/IMV pair to provide full evidence of
463 the Linux IMA measurement process. All pertinent file information
464 of a Linux OS can be collected and stored in an SQL database.
466 - The PA-TNC and PB-TNC protocols can now process huge data payloads
467 >64 kB by distributing PA-TNC attributes over multiple PA-TNC messages
468 and these messages over several PB-TNC batches. As long as no
469 consolidated recommandation from all IMVs can be obtained, the TNC
470 server requests more client data by sending an empty SDATA batch.
472 - The rightgroups2 ipsec.conf option can require group membership during
473 a second authentication round, for example during XAuth authentication
474 against a RADIUS server.
476 - The xauth-pam backend can authenticate IKEv1 XAuth and Hybrid authenticated
477 clients against any PAM service. The IKEv2 eap-gtc plugin does not use
478 PAM directly anymore, but can use any XAuth backend to verify credentials,
481 - The new unity plugin brings support for some parts of the IKEv1 Cisco Unity
482 Extension. As client, charon narrows traffic selectors to the received
483 Split-Include attributes and automatically installs IPsec bypass policies
484 for received Local-LAN attributes. As server, charon sends Split-Include
485 attributes for leftsubnet definitions containing multiple subnets to Unity-
488 - An EAP-Nak payload is returned by clients if the gateway requests an EAP
489 method that the client does not support. Clients can also request a specific
490 EAP method by configuring that method with leftauth.
492 - The eap-dynamic plugin handles EAP-Nak payloads returned by clients and uses
493 these to select a different EAP method supported/requested by the client.
494 The plugin initially requests the first registered method or the first method
495 configured with charon.plugins.eap-dynamic.preferred.
497 - The new left/rightdns options specify connection specific DNS servers to
498 request/respond in IKEv2 configuration payloads or IKEv2 mode config. leftdns
499 can be any (comma separated) combination of %config4 and %config6 to request
500 multiple servers, both for IPv4 and IPv6. rightdns takes a list of DNS server
501 IP addresses to return.
503 - The left/rightsourceip options now accept multiple addresses or pools.
504 leftsourceip can be any (comma separated) combination of %config4, %config6
505 or fixed IP addresses to request. rightsourceip accepts multiple explicitly
506 specified or referenced named pools.
508 - Multiple connections can now share a single address pool when they use the
509 same definition in one of the rightsourceip pools.
511 - The options charon.interfaces_ignore and charon.interfaces_use allow one to
512 configure the network interfaces used by the daemon.
514 - The kernel-netlink plugin supports the charon.install_virtual_ip_on option,
515 which specifies the interface on which virtual IP addresses will be installed.
516 If it is not specified the current behavior of using the outbound interface
519 - The kernel-netlink plugin tries to keep the current source address when
520 looking for valid routes to reach other hosts.
522 - The autotools build has been migrated to use a config.h header. strongSwan
523 development headers will get installed during "make install" if
524 --with-dev-headers has been passed to ./configure.
526 - All crypto primitives gained return values for most operations, allowing
527 crypto backends to fail, for example when using hardware accelerators.
533 - The charon IKE daemon gained experimental support for the IKEv1 protocol.
534 Pluto has been removed from the 5.x series, and unless strongSwan is
535 configured with --disable-ikev1 or --disable-ikev2, charon handles both
536 keying protocols. The feature-set of IKEv1 in charon is almost on par with
537 pluto, but currently does not support AH or bundled AH+ESP SAs. Beside
538 RSA/ECDSA, PSK and XAuth, charon also supports the Hybrid authentication
539 mode. Informations for interoperability and migration is available at
540 http://wiki.strongswan.org/projects/strongswan/wiki/CharonPlutoIKEv1.
542 - Charon's bus_t has been refactored so that loggers and other listeners are
543 now handled separately. The single lock was previously cause for deadlocks
544 if extensive listeners, such as the one provided by the updown plugin, wanted
545 to acquire locks that were held by other threads which in turn tried to log
546 messages, and thus were waiting to acquire the same lock currently held by
547 the thread calling the listener.
548 The implemented changes also allow the use of a read/write-lock for the
549 loggers which increases performance if multiple loggers are registered.
550 Besides several interface changes this last bit also changes the semantics
551 for loggers as these may now be called by multiple threads at the same time.
553 - Source routes are reinstalled if interfaces are reactivated or IP addresses
556 - The thread pool (processor_t) now has more control over the lifecycle of
557 a job (see job.h for details). In particular, it now controls the destruction
558 of jobs after execution and the cancellation of jobs during shutdown. Due to
559 these changes the requeueing feature, previously available to callback_job_t
560 only, is now available to all jobs (in addition to a new rescheduling
563 - In addition to trustchain key strength definitions for different public key
564 systems, the rightauth option now takes a list of signature hash algorithms
565 considered save for trustchain validation. For example, the setting
566 rightauth=rsa-2048-ecdsa-256-sha256-sha384-sha512 requires a trustchain
567 that uses at least RSA-2048 or ECDSA-256 keys and certificate signatures
568 using SHA-256 or better.
574 - Fixed a security vulnerability in the gmp plugin. If this plugin was used
575 for RSA signature verification an empty or zeroed signature was handled as
578 - Fixed several issues with reauthentication and address updates.
584 - The tnc-pdp plugin implements a RADIUS server interface allowing
585 a strongSwan TNC server to act as a Policy Decision Point.
587 - The eap-radius authentication backend enforces Session-Timeout attributes
588 using RFC4478 repeated authentication and acts upon RADIUS Dynamic
589 Authorization extensions, RFC 5176. Currently supported are disconnect
590 requests and CoA messages containing a Session-Timeout.
592 - The eap-radius plugin can forward arbitrary RADIUS attributes from and to
593 clients using custom IKEv2 notify payloads. The new radattr plugin reads
594 attributes to include from files and prints received attributes to the
597 - Added support for untruncated MD5 and SHA1 HMACs in ESP as used in
600 - The cmac plugin implements the AES-CMAC-96 and AES-CMAC-PRF-128 algorithms
601 as defined in RFC 4494 and RFC 4615, respectively.
603 - The resolve plugin automatically installs nameservers via resolvconf(8),
604 if it is installed, instead of modifying /etc/resolv.conf directly.
606 - The IKEv2 charon daemon supports now raw RSA public keys in RFC 3110
607 DNSKEY and PKCS#1 file format.
613 - Upgraded the TCG IF-IMC and IF-IMV C API to the upcoming version 1.3
614 which supports IF-TNCCS 2.0 long message types, the exclusive flags
615 and multiple IMC/IMV IDs. Both the TNC Client and Server as well as
616 the "Test", "Scanner", and "Attestation" IMC/IMV pairs were updated.
618 - Fully implemented the "TCG Attestation PTS Protocol: Binding to IF-M"
619 standard (TLV-based messages only). TPM-based remote attestation of
620 Linux IMA (Integrity Measurement Architecture) possible. Measurement
621 reference values are automatically stored in an SQLite database.
623 - The EAP-RADIUS authentication backend supports RADIUS accounting. It sends
624 start/stop messages containing Username, Framed-IP and Input/Output-Octets
625 attributes and has been tested against FreeRADIUS and Microsoft NPS.
627 - Added support for PKCS#8 encoded private keys via the libstrongswan
628 pkcs8 plugin. This is the default format used by some OpenSSL tools since
629 version 1.0.0 (e.g. openssl req with -keyout).
631 - Added session resumption support to the strongSwan TLS stack.
637 - Because of changing checksums before and after installation which caused
638 the integrity tests to fail we avoided directly linking libsimaka, libtls and
639 libtnccs to those libcharon plugins which make use of these dynamic libraries.
640 Instead we linked the libraries to the charon daemon. Unfortunately Ubuntu
641 11.10 activated the --as-needed ld option which discards explicit links
642 to dynamic libraries that are not actually used by the charon daemon itself,
643 thus causing failures during the loading of the plugins which depend on these
644 libraries for resolving external symbols.
646 - Therefore our approach of computing integrity checksums for plugins had to be
647 changed radically by moving the hash generation from the compilation to the
648 post-installation phase.
654 - The new libstrongswan certexpire plugin collects expiration information of
655 all used certificates and exports them to CSV files. It either directly
656 exports them or uses cron style scheduling for batch exports.
658 - starter passes unresolved hostnames to charon, allowing it to do name
659 resolution not before the connection attempt. This is especially useful with
660 connections between hosts using dynamic IP addresses. Thanks to Mirko Parthey
661 for the initial patch.
663 - The android plugin can now be used without the Android frontend patch and
664 provides DNS server registration and logging to logcat.
666 - Pluto and starter (plus stroke and whack) have been ported to Android.
668 - Support for ECDSA private and public key operations has been added to the
669 pkcs11 plugin. The plugin now also provides DH and ECDH via PKCS#11 and can
670 use tokens as random number generators (RNG). By default only private key
671 operations are enabled, more advanced features have to be enabled by their
672 option in strongswan.conf. This also applies to public key operations (even
673 for keys not stored on the token) which were enabled by default before.
675 - The libstrongswan plugin system now supports detailed plugin dependencies.
676 Many plugins have been extended to export its capabilities and requirements.
677 This allows the plugin loader to resolve plugin loading order automatically,
678 and in future releases, to dynamically load the required features on demand.
679 Existing third party plugins are source (but not binary) compatible if they
680 properly initialize the new get_features() plugin function to NULL.
682 - The tnc-ifmap plugin implements a TNC IF-MAP 2.0 client which can deliver
683 metadata about IKE_SAs via a SOAP interface to a MAP server. The tnc-ifmap
684 plugin requires the Apache Axis2/C library.
690 - Our private libraries (e.g. libstrongswan) are not installed directly in
691 prefix/lib anymore. Instead a subdirectory is used (prefix/lib/ipsec/ by
692 default). The plugins directory is also moved from libexec/ipsec/ to that
695 - The dynamic IMC/IMV libraries were moved from the plugins directory to
696 a new imcvs directory in the prefix/lib/ipsec/ subdirectory.
698 - Job priorities were introduced to prevent thread starvation caused by too
699 many threads handling blocking operations (such as CRL fetching). Refer to
700 strongswan.conf(5) for details.
702 - Two new strongswan.conf options allow to fine-tune performance on IKEv2
703 gateways by dropping IKE_SA_INIT requests on high load.
705 - IKEv2 charon daemon supports start PASS and DROP shunt policies
706 preventing traffic to go through IPsec connections. Installation of the
707 shunt policies either via the XFRM netfilter or PFKEYv2 IPsec kernel
710 - The history of policies installed in the kernel is now tracked so that e.g.
711 trap policies are correctly updated when reauthenticated SAs are terminated.
713 - IMC/IMV Scanner pair implementing the RFC 5792 PA-TNC (IF-M) protocol.
714 Using "netstat -l" the IMC scans open listening ports on the TNC client
715 and sends a port list to the IMV which based on a port policy decides if
716 the client is admitted to the network.
717 (--enable-imc-scanner/--enable-imv-scanner).
719 - IMC/IMV Test pair implementing the RFC 5792 PA-TNC (IF-M) protocol.
720 (--enable-imc-test/--enable-imv-test).
722 - The IKEv2 close action does not use the same value as the ipsec.conf dpdaction
723 setting, but the value defined by its own closeaction keyword. The action
724 is triggered if the remote peer closes a CHILD_SA unexpectedly.
730 - The whitelist plugin for the IKEv2 daemon maintains an in-memory identity
731 whitelist. Any connection attempt of peers not whitelisted will get rejected.
732 The 'ipsec whitelist' utility provides a simple command line frontend for
733 whitelist administration.
735 - The duplicheck plugin provides a specialized form of duplicate checking,
736 doing a liveness check on the old SA and optionally notify a third party
737 application about detected duplicates.
739 - The coupling plugin permanently couples two or more devices by limiting
740 authentication to previously used certificates.
742 - In the case that the peer config and child config don't have the same name
743 (usually in SQL database defined connections), ipsec up|route <peer config>
744 starts|routes all associated child configs and ipsec up|route <child config>
745 only starts|routes the specific child config.
747 - fixed the encoding and parsing of X.509 certificate policy statements (CPS).
749 - Duncan Salerno contributed the eap-sim-pcsc plugin implementing a
750 pcsc-lite based SIM card backend.
752 - The eap-peap plugin implements the EAP PEAP protocol. Interoperates
753 successfully with a FreeRADIUS server and Windows 7 Agile VPN clients.
755 - The IKEv2 daemon charon rereads strongswan.conf on SIGHUP and instructs
756 all plugins to reload. Currently only the eap-radius and the attr plugins
757 support configuration reloading.
759 - Added userland support to the IKEv2 daemon for Extended Sequence Numbers
760 support coming with Linux 2.6.39. To enable ESN on a connection, add
761 the 'esn' keyword to the proposal. The default proposal uses 32-bit sequence
762 numbers only ('noesn'), and the same value is used if no ESN mode is
763 specified. To negotiate ESN support with the peer, include both, e.g.
764 esp=aes128-sha1-esn-noesn.
766 - In addition to ESN, Linux 2.6.39 gained support for replay windows larger
767 than 32 packets. The new global strongswan.conf option 'charon.replay_window'
768 configures the size of the replay window, in packets.
774 - Sansar Choinyambuu implemented the RFC 5793 Posture Broker Protocol (BP)
775 compatible with Trusted Network Connect (TNC). The TNCCS 2.0 protocol
776 requires the tnccs_20, tnc_imc and tnc_imv plugins but does not depend
777 on the libtnc library. Any available IMV/IMC pairs conforming to the
778 Trusted Computing Group's TNC-IF-IMV/IMC 1.2 interface specification
779 can be loaded via /etc/tnc_config.
781 - Re-implemented the TNCCS 1.1 protocol by using the tnc_imc and tnc_imv
782 in place of the external libtnc library.
784 - The tnccs_dynamic plugin loaded on a TNC server in addition to the
785 tnccs_11 and tnccs_20 plugins, dynamically detects the IF-TNCCS
786 protocol version used by a TNC client and invokes an instance of
787 the corresponding protocol stack.
789 - IKE and ESP proposals can now be stored in an SQL database using a
790 new proposals table. The start_action field in the child_configs
791 tables allows the automatic starting or routing of connections stored
794 - The new certificate_authorities and certificate_distribution_points
795 tables make it possible to store CRL and OCSP Certificate Distribution
796 points in an SQL database.
798 - The new 'include' statement allows to recursively include other files in
799 strongswan.conf. Existing sections and values are thereby extended and
800 replaced, respectively.
802 - Due to the changes in the parser for strongswan.conf, the configuration
803 syntax for the attr plugin has changed. Previously, it was possible to
804 specify multiple values of a specific attribute type by adding multiple
805 key/value pairs with the same key (e.g. dns) to the plugins.attr section.
806 Because values with the same key now replace previously defined values
807 this is not possible anymore. As an alternative, multiple values can be
808 specified by separating them with a comma (e.g. dns = 1.2.3.4, 2.3.4.5).
810 - ipsec listalgs now appends (set in square brackets) to each crypto
811 algorithm listed the plugin that registered the function.
813 - Traffic Flow Confidentiality padding supported with Linux 2.6.38 can be used
814 by the IKEv2 daemon. The ipsec.conf 'tfc' keyword pads all packets to a given
815 boundary, the special value '%mtu' pads all packets to the path MTU.
817 - The new af-alg plugin can use various crypto primitives of the Linux Crypto
818 API using the AF_ALG interface introduced with 2.6.38. This removes the need
819 for additional userland implementations of symmetric cipher, hash, hmac and
822 - The IKEv2 daemon supports the INITIAL_CONTACT notify as initiator and
823 responder. The notify is sent when initiating configurations with a unique
824 policy, set in ipsec.conf via the global 'uniqueids' option.
826 - The conftest conformance testing framework enables the IKEv2 stack to perform
827 many tests using a distinct tool and configuration frontend. Various hooks
828 can alter reserved bits, flags, add custom notifies and proposals, reorder
829 or drop messages and much more. It is enabled using the --enable-conftest
832 - The new libstrongswan constraints plugin provides advanced X.509 constraint
833 checking. In addition to X.509 pathLen constraints, the plugin checks for
834 nameConstraints and certificatePolicies, including policyMappings and
835 policyConstraints. The x509 certificate plugin and the pki tool have been
836 enhanced to support these extensions. The new left/rightcertpolicy ipsec.conf
837 connection keywords take OIDs a peer certificate must have.
839 - The left/rightauth ipsec.conf keywords accept values with a minimum strength
840 for trustchain public keys in bits, such as rsa-2048 or ecdsa-256.
842 - The revocation and x509 libstrongswan plugins and the pki tool gained basic
843 support for delta CRLs.
849 - IMPORTANT: the default keyexchange mode 'ike' is changing with release 4.5
850 from 'ikev1' to 'ikev2', thus commemorating the five year anniversary of the
851 IKEv2 RFC 4306 and its mature successor RFC 5996. The time has definitively
852 come for IKEv1 to go into retirement and to cede its place to the much more
853 robust, powerful and versatile IKEv2 protocol!
855 - Added new ctr, ccm and gcm plugins providing Counter, Counter with CBC-MAC
856 and Galois/Counter Modes based on existing CBC implementations. These
857 new plugins bring support for AES and Camellia Counter and CCM algorithms
858 and the AES GCM algorithms for use in IKEv2.
860 - The new pkcs11 plugin brings full Smartcard support to the IKEv2 daemon and
861 the pki utility using one or more PKCS#11 libraries. It currently supports
862 RSA private and public key operations and loads X.509 certificates from
865 - Implemented a general purpose TLS stack based on crypto and credential
866 primitives of libstrongswan. libtls supports TLS versions 1.0, 1.1 and 1.2,
867 ECDHE-ECDSA/RSA, DHE-RSA and RSA key exchange algorithms and RSA/ECDSA based
868 client authentication.
870 - Based on libtls, the eap-tls plugin brings certificate based EAP
871 authentication for client and server. It is compatible to Windows 7 IKEv2
872 Smartcard authentication and the OpenSSL based FreeRADIUS EAP-TLS backend.
874 - Implemented the TNCCS 1.1 Trusted Network Connect protocol using the
875 libtnc library on the strongSwan client and server side via the tnccs_11
876 plugin and optionally connecting to a TNC@FHH-enhanced FreeRADIUS AAA server.
877 Depending on the resulting TNC Recommendation, strongSwan clients are granted
878 access to a network behind a strongSwan gateway (allow), are put into a
879 remediation zone (isolate) or are blocked (none), respectively. Any number
880 of Integrity Measurement Collector/Verifier pairs can be attached
881 via the tnc-imc and tnc-imv charon plugins.
883 - The IKEv1 daemon pluto now uses the same kernel interfaces as the IKEv2
884 daemon charon. As a result of this, pluto now supports xfrm marks which
885 were introduced in charon with 4.4.1.
887 - Applets for Maemo 5 (Nokia) allow to easily configure and control IKEv2
888 based VPN connections with EAP authentication on supported devices.
890 - The RADIUS plugin eap-radius now supports multiple RADIUS servers for
891 redundant setups. Servers are selected by a defined priority, server load and
894 - The simple led plugin controls hardware LEDs through the Linux LED subsystem.
895 It currently shows activity of the IKE daemon and is a good example how to
896 implement a simple event listener.
898 - Improved MOBIKE behavior in several corner cases, for instance, if the
899 initial responder moves to a different address.
901 - Fixed left-/rightnexthop option, which was broken since 4.4.0.
903 - Fixed a bug not releasing a virtual IP address to a pool if the XAUTH
904 identity was different from the IKE identity.
906 - Fixed the alignment of ModeConfig messages on 4-byte boundaries in the
907 case where the attributes are not a multiple of 4 bytes (e.g. Cisco's
910 - Fixed the interoperability of the socket_raw and socket_default
913 - Added man page for strongswan.conf
919 - Support of xfrm marks in IPsec SAs and IPsec policies introduced
920 with the Linux 2.6.34 kernel. For details see the example scenarios
921 ikev2/nat-two-rw-mark, ikev2/rw-nat-mark-in-out and ikev2/net2net-psk-dscp.
923 - The PLUTO_MARK_IN and PLUTO_ESP_ENC environment variables can be used
924 in a user-specific updown script to set marks on inbound ESP or
927 - The openssl plugin now supports X.509 certificate and CRL functions.
929 - OCSP/CRL checking in IKEv2 has been moved to the revocation plugin, enabled
930 by default. Plase update manual load directives in strongswan.conf.
932 - RFC3779 ipAddrBlock constraint checking has been moved to the addrblock
933 plugin, disabled by default. Enable it and update manual load directives
934 in strongswan.conf, if required.
936 - The pki utility supports CRL generation using the --signcrl command.
938 - The ipsec pki --self, --issue and --req commands now support output in
939 PEM format using the --outform pem option.
941 - The major refactoring of the IKEv1 Mode Config functionality now allows
942 the transport and handling of any Mode Config attribute.
944 - The RADIUS proxy plugin eap-radius now supports multiple servers. Configured
945 servers are chosen randomly, with the option to prefer a specific server.
946 Non-responding servers are degraded by the selection process.
948 - The ipsec pool tool manages arbitrary configuration attributes stored
949 in an SQL database. ipsec pool --help gives the details.
951 - The new eap-simaka-sql plugin acts as a backend for EAP-SIM and EAP-AKA,
952 reading triplets/quintuplets from an SQL database.
954 - The High Availability plugin now supports a HA enabled in-memory address
955 pool and Node reintegration without IKE_SA rekeying. The latter allows
956 clients without IKE_SA rekeying support to keep connected during
957 reintegration. Additionally, many other issues have been fixed in the ha
960 - Fixed a potential remote code execution vulnerability resulting from
961 the misuse of snprintf(). The vulnerability is exploitable by
962 unauthenticated users.
968 - The IKEv2 High Availability plugin has been integrated. It provides
969 load sharing and failover capabilities in a cluster of currently two nodes,
970 based on an extend ClusterIP kernel module. More information is available at
971 http://wiki.strongswan.org/projects/strongswan/wiki/HighAvailability.
972 The development of the High Availability functionality was sponsored by
973 secunet Security Networks AG.
975 - Added IKEv1 and IKEv2 configuration support for the AES-GMAC
976 authentication-only ESP cipher. Our aes_gmac kernel patch or a Linux
977 2.6.34 kernel is required to make AES-GMAC available via the XFRM
980 - Added support for Diffie-Hellman groups 22, 23 and 24 to the gmp, gcrypt
981 and openssl plugins, usable by both pluto and charon. The new proposal
982 keywords are modp1024s160, modp2048s224 and modp2048s256. Thanks to Joy Latten
983 from IBM for his contribution.
985 - The IKEv1 pluto daemon supports RAM-based virtual IP pools using
986 the rightsourceip directive with a subnet from which addresses
989 - The ipsec pki --gen and --pub commands now allow the output of
990 private and public keys in PEM format using the --outform pem
993 - The new DHCP plugin queries virtual IP addresses for clients from a DHCP
994 server using broadcasts, or a defined server using the
995 charon.plugins.dhcp.server strongswan.conf option. DNS/WINS server information
996 is additionally served to clients if the DHCP server provides such
997 information. The plugin is used in ipsec.conf configurations having
998 rightsourceip set to %dhcp.
1000 - A new plugin called farp fakes ARP responses for virtual IP addresses
1001 handed out to clients from the IKEv2 daemon charon. The plugin lets a
1002 road-warrior act as a client on the local LAN if it uses a virtual IP
1003 from the responders subnet, e.g. acquired using the DHCP plugin.
1005 - The existing IKEv2 socket implementations have been migrated to the
1006 socket-default and the socket-raw plugins. The new socket-dynamic plugin
1007 binds sockets dynamically to ports configured via the left-/rightikeport
1008 ipsec.conf connection parameters.
1010 - The android charon plugin stores received DNS server information as "net.dns"
1011 system properties, as used by the Android platform.
1017 - The IKEv2 daemon supports RFC 3779 IP address block constraints
1018 carried as a critical X.509v3 extension in the peer certificate.
1020 - The ipsec pool --add|del dns|nbns command manages DNS and NBNS name
1021 server entries that are sent via the IKEv1 Mode Config or IKEv2
1022 Configuration Payload to remote clients.
1024 - The Camellia cipher can be used as an IKEv1 encryption algorithm.
1026 - The IKEv1 and IKEV2 daemons now check certificate path length constraints.
1028 - The new ipsec.conf conn option "inactivity" closes a CHILD_SA if no traffic
1029 was sent or received within the given interval. To close the complete IKE_SA
1030 if its only CHILD_SA was inactive, set the global strongswan.conf option
1031 "charon.inactivity_close_ike" to yes.
1033 - More detailed IKEv2 EAP payload information in debug output
1035 - IKEv2 EAP-SIM and EAP-AKA share joint libsimaka library
1037 - Added required userland changes for proper SHA256 and SHA384/512 in ESP that
1038 will be introduced with Linux 2.6.33. The "sha256"/"sha2_256" keyword now
1039 configures the kernel with 128 bit truncation, not the non-standard 96
1040 bit truncation used by previous releases. To use the old 96 bit truncation
1041 scheme, the new "sha256_96" proposal keyword has been introduced.
1043 - Fixed IPComp in tunnel mode, stripping out the duplicated outer header. This
1044 change makes IPcomp tunnel mode connections incompatible with previous
1045 releases; disable compression on such tunnels.
1047 - Fixed BEET mode connections on recent kernels by installing SAs with
1048 appropriate traffic selectors, based on a patch by Michael Rossberg.
1050 - Using extensions (such as BEET mode) and crypto algorithms (such as twofish,
1051 serpent, sha256_96) allocated in the private use space now require that we
1052 know its meaning, i.e. we are talking to strongSwan. Use the new
1053 "charon.send_vendor_id" option in strongswan.conf to let the remote peer know
1056 - Experimental support for draft-eronen-ipsec-ikev2-eap-auth, where the
1057 responder omits public key authentication in favor of a mutual authentication
1058 method. To enable EAP-only authentication, set rightauth=eap on the responder
1059 to rely only on the MSK constructed AUTH payload. This not-yet standardized
1060 extension requires the strongSwan vendor ID introduced above.
1062 - The IKEv1 daemon ignores the Juniper SRX notification type 40001, thus
1063 allowing interoperability.
1069 - The IKEv1 pluto daemon can now use SQL-based address pools to deal out
1070 virtual IP addresses as a Mode Config server. The pool capability has been
1071 migrated from charon's sql plugin to a new attr-sql plugin which is loaded
1072 by libstrongswan and which can be used by both daemons either with a SQLite
1073 or MySQL database and the corresponding plugin.
1075 - Plugin names have been streamlined: EAP plugins now have a dash after eap
1076 (e.g. eap-sim), as it is used with the --enable-eap-sim ./configure option.
1077 Plugin configuration sections in strongswan.conf now use the same name as the
1078 plugin itself (i.e. with a dash). Make sure to update "load" directives and
1079 the affected plugin sections in existing strongswan.conf files.
1081 - The private/public key parsing and encoding has been split up into
1082 separate pkcs1, pgp, pem and dnskey plugins. The public key implementation
1083 plugins gmp, gcrypt and openssl can all make use of them.
1085 - The EAP-AKA plugin can use different backends for USIM/quintuplet
1086 calculations, very similar to the EAP-SIM plugin. The existing 3GPP2 software
1087 implementation has been migrated to a separate plugin.
1089 - The IKEv2 daemon charon gained basic PGP support. It can use locally installed
1090 peer certificates and can issue signatures based on RSA private keys.
1092 - The new 'ipsec pki' tool provides a set of commands to maintain a public
1093 key infrastructure. It currently supports operations to create RSA and ECDSA
1094 private/public keys, calculate fingerprints and issue or verify certificates.
1096 - Charon uses a monotonic time source for statistics and job queueing, behaving
1097 correctly if the system time changes (e.g. when using NTP).
1099 - In addition to time based rekeying, charon supports IPsec SA lifetimes based
1100 on processed volume or number of packets. They new ipsec.conf paramaters
1101 'lifetime' (an alias to 'keylife'), 'lifebytes' and 'lifepackets' handle
1102 SA timeouts, while the parameters 'margintime' (an alias to rekeymargin),
1103 'marginbytes' and 'marginpackets' trigger the rekeying before a SA expires.
1104 The existing parameter 'rekeyfuzz' affects all margins.
1106 - If no CA/Gateway certificate is specified in the NetworkManager plugin,
1107 charon uses a set of trusted root certificates preinstalled by distributions.
1108 The directory containing CA certificates can be specified using the
1109 --with-nm-ca-dir=path configure option.
1111 - Fixed the encoding of the Email relative distinguished name in left|rightid
1114 - Fixed the broken parsing of PKCS#7 wrapped certificates by the pluto daemon.
1116 - Fixed smartcard-based authentication in the pluto daemon which was broken by
1117 the ECDSA support introduced with the 4.3.2 release.
1119 - A patch contributed by Heiko Hund fixes mixed IPv6 in IPv4 and vice versa
1120 tunnels established with the IKEv1 pluto daemon.
1122 - The pluto daemon now uses the libstrongswan x509 plugin for certificates and
1123 CRls and the struct id type was replaced by identification_t used by charon
1124 and the libstrongswan library.
1130 - IKEv2 charon daemon ported to FreeBSD and Mac OS X. Installation details can
1131 be found on wiki.strongswan.org.
1133 - ipsec statusall shows the number of bytes transmitted and received over
1134 ESP connections configured by the IKEv2 charon daemon.
1136 - The IKEv2 charon daemon supports include files in ipsec.secrets.
1142 - The configuration option --enable-integrity-test plus the strongswan.conf
1143 option libstrongswan.integrity_test = yes activate integrity tests
1144 of the IKE daemons charon and pluto, libstrongswan and all loaded
1145 plugins. Thus dynamic library misconfigurations and non-malicious file
1146 manipulations can be reliably detected.
1148 - The new default setting libstrongswan.ecp_x_coordinate_only=yes allows
1149 IKEv1 interoperability with MS Windows using the ECP DH groups 19 and 20.
1151 - The IKEv1 pluto daemon now supports the AES-CCM and AES-GCM ESP
1152 authenticated encryption algorithms.
1154 - The IKEv1 pluto daemon now supports V4 OpenPGP keys.
1156 - The RDN parser vulnerability discovered by Orange Labs research team
1157 was not completely fixed in version 4.3.2. Some more modifications
1158 had to be applied to the asn1_length() function to make it robust.
1164 - The new gcrypt plugin provides symmetric cipher, hasher, RNG, Diffie-Hellman
1165 and RSA crypto primitives using the LGPL licensed GNU gcrypt library.
1167 - libstrongswan features an integrated crypto selftest framework for registered
1168 algorithms. The test-vector plugin provides a first set of test vectors and
1169 allows pluto and charon to rely on tested crypto algorithms.
1171 - pluto can now use all libstrongswan plugins with the exception of x509 and xcbc.
1172 Thanks to the openssl plugin, the ECP Diffie-Hellman groups 19, 20, 21, 25, and
1173 26 as well as ECDSA-256, ECDSA-384, and ECDSA-521 authentication can be used
1176 - Applying their fuzzing tool, the Orange Labs vulnerability research team found
1177 another two DoS vulnerabilities, one in the rather old ASN.1 parser of Relative
1178 Distinguished Names (RDNs) and a second one in the conversion of ASN.1 UTCTIME
1179 and GENERALIZEDTIME strings to a time_t value.
1185 - The nm plugin now passes DNS/NBNS server information to NetworkManager,
1186 allowing a gateway administrator to set DNS/NBNS configuration on clients
1189 - The nm plugin also accepts CA certificates for gateway authentication. If
1190 a CA certificate is configured, strongSwan uses the entered gateway address
1191 as its idenitity, requiring the gateways certificate to contain the same as
1192 subjectAltName. This allows a gateway administrator to deploy the same
1193 certificates to Windows 7 and NetworkManager clients.
1195 - The command ipsec purgeike deletes IKEv2 SAs that don't have a CHILD SA.
1196 The command ipsec down <conn>{n} deletes CHILD SA instance n of connection
1197 <conn> whereas ipsec down <conn>{*} deletes all CHILD SA instances.
1198 The command ipsec down <conn>[n] deletes IKE SA instance n of connection
1199 <conn> plus dependent CHILD SAs whereas ipsec down <conn>[*] deletes all
1200 IKE SA instances of connection <conn>.
1202 - Fixed a regression introduced in 4.3.0 where EAP authentication calculated
1203 the AUTH payload incorrectly. Further, the EAP-MSCHAPv2 MSK key derivation
1204 has been updated to be compatible with the Windows 7 Release Candidate.
1206 - Refactored installation of triggering policies. Routed policies are handled
1207 outside of IKE_SAs to keep them installed in any case. A tunnel gets
1208 established only once, even if initiation is delayed due network outages.
1210 - Improved the handling of multiple acquire signals triggered by the kernel.
1212 - Fixed two DoS vulnerabilities in the charon daemon that were discovered by
1213 fuzzing techniques: 1) Sending a malformed IKE_SA_INIT request leaved an
1214 incomplete state which caused a null pointer dereference if a subsequent
1215 CREATE_CHILD_SA request was sent. 2) Sending an IKE_AUTH request with either
1216 a missing TSi or TSr payload caused a null pointer derefence because the
1217 checks for TSi and TSr were interchanged. The IKEv2 fuzzer used was
1218 developed by the Orange Labs vulnerability research team. The tool was
1219 initially written by Gabriel Campana and is now maintained by Laurent Butti.
1221 - Added support for AES counter mode in ESP in IKEv2 using the proposal
1222 keywords aes128ctr, aes192ctr and aes256ctr.
1224 - Further progress in refactoring pluto: Use of the curl and ldap plugins
1225 for fetching crls and OCSP. Use of the random plugin to get keying material
1226 from /dev/random or /dev/urandom. Use of the openssl plugin as an alternative
1227 to the aes, des, sha1, sha2, and md5 plugins. The blowfish, twofish, and
1228 serpent encryption plugins are now optional and are not enabled by default.
1234 - Support for the IKEv2 Multiple Authentication Exchanges extension (RFC4739).
1235 Initiators and responders can use several authentication rounds (e.g. RSA
1236 followed by EAP) to authenticate. The new ipsec.conf leftauth/rightauth and
1237 leftauth2/rightauth2 parameters define own authentication rounds or setup
1238 constraints for the remote peer. See the ipsec.conf man page for more detials.
1240 - If glibc printf hooks (register_printf_function) are not available,
1241 strongSwan can use the vstr string library to run on non-glibc systems.
1243 - The IKEv2 charon daemon can now configure the ESP CAMELLIA-CBC cipher
1244 (esp=camellia128|192|256).
1246 - Refactored the pluto and scepclient code to use basic functions (memory
1247 allocation, leak detective, chunk handling, printf_hooks, strongswan.conf
1248 attributes, ASN.1 parser, etc.) from the libstrongswan library.
1250 - Up to two DNS and WINS servers to be sent via IKEv1 ModeConfig can be
1251 configured in the pluto section of strongswan.conf.
1257 - The new server-side EAP RADIUS plugin (--enable-eap-radius)
1258 relays EAP messages to and from a RADIUS server. Successfully
1259 tested with with a freeradius server using EAP-MD5 and EAP-SIM.
1261 - A vulnerability in the Dead Peer Detection (RFC 3706) code was found by
1262 Gerd v. Egidy <gerd.von.egidy@intra2net.com> of Intra2net AG affecting
1263 all Openswan and strongSwan releases. A malicious (or expired ISAKMP)
1264 R_U_THERE or R_U_THERE_ACK Dead Peer Detection packet can cause the
1265 pluto IKE daemon to crash and restart. No authentication or encryption
1266 is required to trigger this bug. One spoofed UDP packet can cause the
1267 pluto IKE daemon to restart and be unresponsive for a few seconds while
1268 restarting. This DPD null state vulnerability has been officially
1269 registered as CVE-2009-0790 and is fixed by this release.
1271 - ASN.1 to time_t conversion caused a time wrap-around for
1272 dates after Jan 18 03:14:07 UTC 2038 on 32-bit platforms.
1273 As a workaround such dates are set to the maximum representable
1274 time, i.e. Jan 19 03:14:07 UTC 2038.
1276 - Distinguished Names containing wildcards (*) are not sent in the
1277 IDr payload anymore.
1283 - Fixed a use-after-free bug in the DPD timeout section of the
1284 IKEv1 pluto daemon which sporadically caused a segfault.
1286 - Fixed a crash in the IKEv2 charon daemon occurring with
1287 mixed RAM-based and SQL-based virtual IP address pools.
1289 - Fixed ASN.1 parsing of algorithmIdentifier objects where the
1290 parameters field is optional.
1292 - Ported nm plugin to NetworkManager 7.1.
1298 - Support of the EAP-MSCHAPv2 protocol enabled by the option
1299 --enable-eap-mschapv2. Requires the MD4 hash algorithm enabled
1300 either by --enable-md4 or --enable-openssl.
1302 - Assignment of up to two DNS and up to two WINS servers to peers via
1303 the IKEv2 Configuration Payload (CP). The IPv4 or IPv6 nameserver
1304 addresses are defined in strongswan.conf.
1306 - The strongSwan applet for the Gnome NetworkManager is now built and
1307 distributed as a separate tarball under the name NetworkManager-strongswan.
1313 - Fixed ESP NULL encryption broken by the refactoring of keymat.c.
1314 Also introduced proper initialization and disposal of keying material.
1316 - Fixed the missing listing of connection definitions in ipsec statusall
1317 broken by an unfortunate local variable overload.
1323 - Several performance improvements to handle thousands of tunnels with almost
1324 linear upscaling. All relevant data structures have been replaced by faster
1325 counterparts with better lookup times.
1327 - Better parallelization to run charon on multiple cores. Due to improved
1328 ressource locking and other optimizations the daemon can take full
1329 advantage of 16 or even more cores.
1331 - The load-tester plugin can use a NULL Diffie-Hellman group and simulate
1332 unique identities and certificates by signing peer certificates using a CA
1335 - The redesigned stroke in-memory IP pool handles leases. The "ipsec leases"
1336 command queries assigned leases.
1338 - Added support for smartcards in charon by using the ENGINE API provided by
1339 OpenSSL, based on patches by Michael Roßberg.
1341 - The Padlock plugin supports the hardware RNG found on VIA CPUs to provide a
1342 reliable source of randomness.
1347 - Flexible configuration of logging subsystem allowing to log to multiple
1348 syslog facilities or to files using fine-grained log levels for each target.
1350 - Load testing plugin to do stress testing of the IKEv2 daemon against self
1351 or another host. Found and fixed issues during tests in the multi-threaded
1352 use of the OpenSSL plugin.
1354 - Added profiling code to synchronization primitives to find bottlenecks if
1355 running on multiple cores. Found and fixed an issue where parts of the
1356 Diffie-Hellman calculation acquired an exclusive lock. This greatly improves
1357 parallelization to multiple cores.
1359 - updown script invocation has been separated into a plugin of its own to
1360 further slim down the daemon core.
1362 - Separated IKE_SA/CHILD_SA key derivation process into a closed system,
1363 allowing future implementations to use a secured environment in e.g. kernel
1366 - The kernel interface of charon has been modularized. XFRM NETLINK (default)
1367 and PFKEY (--enable-kernel-pfkey) interface plugins for the native IPsec
1368 stack of the Linux 2.6 kernel as well as a PFKEY interface for the KLIPS
1369 IPsec stack (--enable-kernel-klips) are provided.
1371 - Basic Mobile IPv6 support has been introduced, securing Binding Update
1372 messages as well as tunneled traffic between Mobile Node and Home Agent.
1373 The installpolicy=no option allows peaceful cooperation with a dominant
1374 mip6d daemon and the new type=transport_proxy implements the special MIPv6
1375 IPsec transport proxy mode where the IKEv2 daemon uses the Care-of-Address
1376 but the IPsec SA is set up for the Home Address.
1378 - Implemented migration of Mobile IPv6 connections using the KMADDRESS
1379 field contained in XFRM_MSG_MIGRATE messages sent by the mip6d daemon
1380 via the Linux 2.6.28 (or appropriately patched) kernel.
1386 - IKEv2 charon daemon supports authentication based on raw public keys
1387 stored in the SQL database backend. The ipsec listpubkeys command
1388 lists the available raw public keys via the stroke interface.
1390 - Several MOBIKE improvements: Detect changes in NAT mappings in DPD exchanges,
1391 handle events if kernel detects NAT mapping changes in UDP-encapsulated
1392 ESP packets (requires kernel patch), reuse old addesses in MOBIKE updates as
1393 long as possible and other fixes.
1395 - Fixed a bug in addr_in_subnet() which caused insertion of wrong source
1396 routes for destination subnets having netwmasks not being a multiple of 8 bits.
1397 Thanks go to Wolfgang Steudel, TU Ilmenau for reporting this bug.
1403 - Fixed a Denial-of-Service vulnerability where an IKE_SA_INIT message with
1404 a KE payload containing zeroes only can cause a crash of the IKEv2 charon
1405 daemon due to a NULL pointer returned by the mpz_export() function of the
1406 GNU Multiprecision Library (GMP). Thanks go to Mu Dynamics Research Labs
1407 for making us aware of this problem.
1409 - The new agent plugin provides a private key implementation on top of an
1412 - The NetworkManager plugin has been extended to support certificate client
1413 authentication using RSA keys loaded from a file or using ssh-agent.
1415 - Daemon capability dropping has been ported to libcap and must be enabled
1416 explicitly --with-capabilities=libcap. Future version will support the
1417 newer libcap2 library.
1419 - ipsec listalgs lists the IKEv2 cryptografic algorithms registered with the
1420 charon keying daemon.
1426 - A NetworkManager plugin allows GUI-based configuration of road-warrior
1427 clients in a simple way. It features X509 based gateway authentication
1428 and EAP client authentication, tunnel setup/teardown and storing passwords
1429 in the Gnome Keyring.
1431 - A new EAP-GTC plugin implements draft-sheffer-ikev2-gtc-00.txt and allows
1432 username/password authentication against any PAM service on the gateway.
1433 The new EAP method interacts nicely with the NetworkManager plugin and allows
1434 client authentication against e.g. LDAP.
1436 - Improved support for the EAP-Identity method. The new ipsec.conf eap_identity
1437 parameter defines an additional identity to pass to the server in EAP
1440 - The "ipsec statusall" command now lists CA restrictions, EAP
1441 authentication types and EAP identities.
1443 - Fixed two multithreading deadlocks occurring when starting up
1444 several hundred tunnels concurrently.
1446 - Fixed the --enable-integrity-test configure option which
1447 computes a SHA-1 checksum over the libstrongswan library.
1453 - Consistent logging of IKE and CHILD SAs at the audit (AUD) level.
1455 - Improved the performance of the SQL-based virtual IP address pool
1456 by introducing an additional addresses table. The leases table
1457 storing only history information has become optional and can be
1458 disabled by setting charon.plugins.sql.lease_history = no in
1461 - The XFRM_STATE_AF_UNSPEC flag added to xfrm.h allows IPv4-over-IPv6
1462 and IPv6-over-IPv4 tunnels with the 2.6.26 and later Linux kernels.
1464 - management of different virtual IP pools for different
1465 network interfaces have become possible.
1467 - fixed a bug which prevented the assignment of more than 256
1468 virtual IP addresses from a pool managed by an sql database.
1470 - fixed a bug which did not delete own IPCOMP SAs in the kernel.
1476 - Added statistics functions to ipsec pool --status and ipsec pool --leases
1477 and input validation checks to various ipsec pool commands.
1479 - ipsec statusall now lists all loaded charon plugins and displays
1480 the negotiated IKEv2 cipher suite proposals.
1482 - The openssl plugin supports the elliptic curve Diffie-Hellman groups
1483 19, 20, 21, 25, and 26.
1485 - The openssl plugin supports ECDSA authentication using elliptic curve
1488 - Fixed a bug in stroke which caused multiple charon threads to close
1489 the file descriptors during packet transfers over the stroke socket.
1491 - ESP sequence numbers are now migrated in IPsec SA updates handled by
1492 MOBIKE. Works only with Linux kernels >= 2.6.17.
1498 - Fixed the strongswan.conf path configuration problem that occurred when
1499 --sysconfig was not set explicitly in ./configure.
1501 - Fixed a number of minor bugs that where discovered during the 4th
1502 IKEv2 interoperability workshop in San Antonio, TX.
1508 - Plugins for libstrongswan and charon can optionally be loaded according
1509 to a configuration in strongswan.conf. Most components provide a
1510 "load = " option followed by a space separated list of plugins to load.
1511 This allows e.g. the fallback from a hardware crypto accelerator to
1512 to software-based crypto plugins.
1514 - Charons SQL plugin has been extended by a virtual IP address pool.
1515 Configurations with a rightsourceip=%poolname setting query a SQLite or
1516 MySQL database for leases. The "ipsec pool" command helps in administrating
1517 the pool database. See ipsec pool --help for the available options
1519 - The Authenticated Encryption Algorithms AES-CCM-8/12/16 and AES-GCM-8/12/16
1520 for ESP are now supported starting with the Linux 2.6.25 kernel. The
1521 syntax is e.g. esp=aes128ccm12 or esp=aes256gcm16.
1527 - Support for "Hash and URL" encoded certificate payloads has been implemented
1528 in the IKEv2 daemon charon. Using the "certuribase" option of a CA section
1529 allows to assign a base URL to all certificates issued by the specified CA.
1530 The final URL is then built by concatenating that base and the hex encoded
1531 SHA1 hash of the DER encoded certificate. Note that this feature is disabled
1532 by default and must be enabled using the option "charon.hash_and_url".
1534 - The IKEv2 daemon charon now supports the "uniqueids" option to close multiple
1535 IKE_SAs with the same peer. The option value "keep" prefers existing
1536 connection setups over new ones, where the value "replace" replaces existing
1539 - The crypto factory in libstrongswan additionally supports random number
1540 generators, plugins may provide other sources of randomness. The default
1541 plugin reads raw random data from /dev/(u)random.
1543 - Extended the credential framework by a caching option to allow plugins
1544 persistent caching of fetched credentials. The "cachecrl" option has been
1547 - The new trustchain verification introduced in 4.2.0 has been parallelized.
1548 Threads fetching CRL or OCSP information no longer block other threads.
1550 - A new IKEv2 configuration attribute framework has been introduced allowing
1551 plugins to provide virtual IP addresses, and in the future, other
1552 configuration attribute services (e.g. DNS/WINS servers).
1554 - The stroke plugin has been extended to provide virtual IP addresses from
1555 a pool defined in ipsec.conf. The "rightsourceip" parameter now accepts
1556 address pools in CIDR notation (e.g. 10.1.1.0/24). The parameter also accepts
1557 the value "%poolname", where "poolname" identifies a pool provided by a
1560 - Fixed compilation on uClibc and a couple of other minor bugs.
1562 - Set DPD defaults in ipsec starter to dpd_delay=30s and dpd_timeout=150s.
1564 - The IKEv1 pluto daemon now supports the ESP encryption algorithm CAMELLIA
1565 with key lengths of 128, 192, and 256 bits, as well as the authentication
1566 algorithm AES_XCBC_MAC. Configuration example: esp=camellia192-aesxcbc.
1572 - libstrongswan has been modularized to attach crypto algorithms,
1573 credential implementations (keys, certificates) and fetchers dynamically
1574 through plugins. Existing code has been ported to plugins:
1575 - RSA/Diffie-Hellman implementation using the GNU Multi Precision library
1576 - X509 certificate system supporting CRLs, OCSP and attribute certificates
1577 - Multiple plugins providing crypto algorithms in software
1578 - CURL and OpenLDAP fetcher
1580 - libstrongswan gained a relational database API which uses pluggable database
1581 providers. Plugins for MySQL and SQLite are available.
1583 - The IKEv2 keying daemon charon is more extensible. Generic plugins may provide
1584 connection configuration, credentials and EAP methods or control the daemon.
1585 Existing code has been ported to plugins:
1586 - EAP-AKA, EAP-SIM, EAP-MD5 and EAP-Identity
1587 - stroke configuration, credential and control (compatible to pluto)
1588 - XML bases management protocol to control and query the daemon
1589 The following new plugins are available:
1590 - An experimental SQL configuration, credential and logging plugin on
1591 top of either MySQL or SQLite
1592 - A unit testing plugin to run tests at daemon startup
1594 - The authentication and credential framework in charon has been heavily
1595 refactored to support modular credential providers, proper
1596 CERTREQ/CERT payload exchanges and extensible authorization rules.
1598 - The framework of strongSwan Manager has envolved to the web application
1599 framework libfast (FastCGI Application Server w/ Templates) and is usable
1600 by other applications.
1606 - IKE rekeying in NAT situations did not inherit the NAT conditions
1607 to the rekeyed IKE_SA so that the UDP encapsulation was lost with
1608 the next CHILD_SA rekeying.
1610 - Wrong type definition of the next_payload variable in id_payload.c
1611 caused an INVALID_SYNTAX error on PowerPC platforms.
1613 - Implemented IKEv2 EAP-SIM server and client test modules that use
1614 triplets stored in a file. For details on the configuration see
1615 the scenario 'ikev2/rw-eap-sim-rsa'.
1621 - Fixed error in the ordering of the certinfo_t records in the ocsp cache that
1622 caused multiple entries of the same serial number to be created.
1624 - Implementation of a simple EAP-MD5 module which provides CHAP
1625 authentication. This may be interesting in conjunction with certificate
1626 based server authentication, as weak passwords can't be brute forced
1627 (in contradiction to traditional IKEv2 PSK).
1629 - A complete software based implementation of EAP-AKA, using algorithms
1630 specified in 3GPP2 (S.S0055). This implementation does not use an USIM,
1631 but reads the secrets from ipsec.secrets. Make sure to read eap_aka.h
1634 - Support for vendor specific EAP methods using Expanded EAP types. The
1635 interface to EAP modules has been slightly changed, so make sure to
1636 check the changes if you're already rolling your own modules.
1642 - The default _updown script now dynamically inserts and removes ip6tables
1643 firewall rules if leftfirewall=yes is set in IPv6 connections. New IPv6
1644 net-net and roadwarrior (PSK/RSA) scenarios for both IKEv1 and IKEV2 were
1647 - Implemented RFC4478 repeated authentication to force EAP/Virtual-IP clients
1648 to reestablish an IKE_SA within a given timeframe.
1650 - strongSwan Manager supports configuration listing, initiation and termination
1651 of IKE and CHILD_SAs.
1653 - Fixes and improvements to multithreading code.
1655 - IKEv2 plugins have been renamed to libcharon-* to avoid naming conflicts.
1656 Make sure to remove the old plugins in $libexecdir/ipsec, otherwise they get
1663 - Removed recursive pthread mutexes since uClibc doesn't support them.
1669 - In NAT traversal situations and multiple queued Quick Modes,
1670 those pending connections inserted by auto=start after the
1671 port floating from 500 to 4500 were erronously deleted.
1673 - Added a "forceencaps" connection parameter to enforce UDP encapsulation
1674 to surmount restrictive firewalls. NAT detection payloads are faked to
1675 simulate a NAT situation and trick the other peer into NAT mode (IKEv2 only).
1677 - Preview of strongSwan Manager, a web based configuration and monitoring
1678 application. It uses a new XML control interface to query the IKEv2 daemon
1679 (see http://wiki.strongswan.org/wiki/Manager).
1681 - Experimental SQLite configuration backend which will provide the configuration
1682 interface for strongSwan Manager in future releases.
1684 - Further improvements to MOBIKE support.
1690 - Since some third party IKEv2 implementations run into
1691 problems with strongSwan announcing MOBIKE capability per
1692 default, MOBIKE can be disabled on a per-connection-basis
1693 using the mobike=no option. Whereas mobike=no disables the
1694 sending of the MOBIKE_SUPPORTED notification and the floating
1695 to UDP port 4500 with the IKE_AUTH request even if no NAT
1696 situation has been detected, strongSwan will still support
1697 MOBIKE acting as a responder.
1699 - the default ipsec routing table plus its corresponding priority
1700 used for inserting source routes has been changed from 100 to 220.
1701 It can be configured using the --with-ipsec-routing-table and
1702 --with-ipsec-routing-table-prio options.
1704 - the --enable-integrity-test configure option tests the
1705 integrity of the libstrongswan crypto code during the charon
1708 - the --disable-xauth-vid configure option disables the sending
1709 of the XAUTH vendor ID. This can be used as a workaround when
1710 interoperating with some Windows VPN clients that get into
1711 trouble upon reception of an XAUTH VID without eXtended
1712 AUTHentication having been configured.
1714 - ipsec stroke now supports the rereadsecrets, rereadaacerts,
1715 rereadacerts, and listacerts options.
1721 - If a DNS lookup failure occurs when resolving right=%<FQDN>
1722 or right=<FQDN> combined with rightallowany=yes then the
1723 connection is not updated by ipsec starter thus preventing
1724 the disruption of an active IPsec connection. Only if the DNS
1725 lookup successfully returns with a changed IP address the
1726 corresponding connection definition is updated.
1728 - Routes installed by the keying daemons are now in a separate
1729 routing table with the ID 100 to avoid conflicts with the main
1730 table. Route lookup for IKEv2 traffic is done in userspace to ignore
1731 routes installed for IPsec, as IKE traffic shouldn't get encapsulated.
1737 - The pluto IKEv1 daemon now exhibits the same behaviour as its
1738 IKEv2 companion charon by inserting an explicit route via the
1739 _updown script only if a sourceip exists. This is admissible
1740 since routing through the IPsec tunnel is handled automatically
1741 by NETKEY's IPsec policies. As a consequence the left|rightnexthop
1742 parameter is not required any more.
1744 - The new IKEv1 parameter right|leftallowany parameters helps to handle
1745 the case where both peers possess dynamic IP addresses that are
1746 usually resolved using DynDNS or a similar service. The configuration
1751 can be used by the initiator to start up a connection to a peer
1752 by resolving peer.foo.bar into the currently allocated IP address.
1753 Thanks to the rightallowany flag the connection behaves later on
1758 so that the peer can rekey the connection as an initiator when his
1759 IP address changes. An alternative notation is
1763 which will implicitly set rightallowany=yes.
1765 - ipsec starter now fails more gracefully in the presence of parsing
1766 errors. Flawed ca and conn section are discarded and pluto is started
1767 if non-fatal errors only were encountered. If right=%peer.foo.bar
1768 cannot be resolved by DNS then right=%any will be used so that passive
1769 connections as a responder are still possible.
1771 - The new pkcs11initargs parameter that can be placed in the
1772 setup config section of /etc/ipsec.conf allows the definition
1773 of an argument string that is used with the PKCS#11 C_Initialize()
1774 function. This non-standard feature is required by the NSS softoken
1775 library. This patch was contributed by Robert Varga.
1777 - Fixed a bug in ipsec starter introduced by strongswan-2.8.5
1778 which caused a segmentation fault in the presence of unknown
1779 or misspelt keywords in ipsec.conf. This bug fix was contributed
1782 - Partial support for MOBIKE in IKEv2. The initiator acts on interface/
1783 address configuration changes and updates IKE and IPsec SAs dynamically.
1789 - IKEv2 peer configuration selection now can be based on a given
1790 certification authority using the rightca= statement.
1792 - IKEv2 authentication based on RSA signatures now can handle multiple
1793 certificates issued for a given peer ID. This allows a smooth transition
1794 in the case of a peer certificate renewal.
1796 - IKEv2: Support for requesting a specific virtual IP using leftsourceip on the
1797 client and returning requested virtual IPs using rightsourceip=%config
1798 on the server. If the server does not support configuration payloads, the
1799 client enforces its leftsourceip parameter.
1801 - The ./configure options --with-uid/--with-gid allow pluto and charon
1802 to drop their privileges to a minimum and change to an other UID/GID. This
1803 improves the systems security, as a possible intruder may only get the
1804 CAP_NET_ADMIN capability.
1806 - Further modularization of charon: Pluggable control interface and
1807 configuration backend modules provide extensibility. The control interface
1808 for stroke is included, and further interfaces using DBUS (NetworkManager)
1809 or XML are on the way. A backend for storing configurations in the daemon
1810 is provided and more advanced backends (using e.g. a database) are trivial
1813 - Fixed a compilation failure in libfreeswan occurring with Linux kernel
1820 - Support for an additional Diffie-Hellman exchange when creating/rekeying
1821 a CHILD_SA in IKEv2 (PFS). PFS is enabled when the proposal contains a
1822 DH group (e.g. "esp=aes128-sha1-modp1536"). Further, DH group negotiation
1823 is implemented properly for rekeying.
1825 - Support for the AES-XCBC-96 MAC algorithm for IPsec SAs when using IKEv2
1826 (requires linux >= 2.6.20). It is enabled using e.g. "esp=aes256-aesxcbc".
1828 - Working IPv4-in-IPv6 and IPv6-in-IPv4 tunnels for linux >= 2.6.21.
1830 - Added support for EAP modules which do not establish an MSK.
1832 - Removed the dependencies from the /usr/include/linux/ headers by
1833 including xfrm.h, ipsec.h, and pfkeyv2.h in the distribution.
1835 - crlNumber is now listed by ipsec listcrls
1837 - The xauth_modules.verify_secret() function now passes the
1844 - Server side cookie support. If to may IKE_SAs are in CONNECTING state,
1845 cookies are enabled and protect against DoS attacks with faked source
1846 addresses. Number of IKE_SAs in CONNECTING state is also limited per
1847 peer address to avoid resource exhaustion. IKE_SA_INIT messages are
1848 compared to properly detect retransmissions and incoming retransmits are
1849 detected even if the IKE_SA is blocked (e.g. doing OCSP fetches).
1851 - The IKEv2 daemon charon now supports dynamic http- and ldap-based CRL
1852 fetching enabled by crlcheckinterval > 0 and caching fetched CRLs
1853 enabled by cachecrls=yes.
1855 - Added the configuration options --enable-nat-transport which enables
1856 the potentially insecure NAT traversal for IPsec transport mode and
1857 --disable-vendor-id which disables the sending of the strongSwan
1860 - Fixed a long-standing bug in the pluto IKEv1 daemon which caused
1861 a segmentation fault if a malformed payload was detected in the
1862 IKE MR2 message and pluto tried to send an encrypted notification
1865 - Added the NATT_IETF_02_N Vendor ID in order to support IKEv1 connections
1866 with Windows 2003 Server which uses a wrong VID hash.
1872 - Support of SHA2_384 hash function for protecting IKEv1
1873 negotiations and support of SHA2 signatures in X.509 certificates.
1875 - Fixed a serious bug in the computation of the SHA2-512 HMAC
1876 function. Introduced automatic self-test of all IKEv1 hash
1877 and hmac functions during pluto startup. Failure of a self-test
1878 currently issues a warning only but does not exit pluto [yet].
1880 - Support for SHA2-256/384/512 PRF and HMAC functions in IKEv2.
1882 - Full support of CA information sections. ipsec listcainfos
1883 now shows all collected crlDistributionPoints and OCSP
1886 - Support of the Online Certificate Status Protocol (OCSP) for IKEv2.
1887 This feature requires the HTTP fetching capabilities of the libcurl
1888 library which must be enabled by setting the --enable-http configure
1891 - Refactored core of the IKEv2 message processing code, allowing better
1892 code reuse and separation.
1894 - Virtual IP support in IKEv2 using INTERNAL_IP4/6_ADDRESS configuration
1895 payload. Additionally, the INTERNAL_IP4/6_DNS attribute is interpreted
1896 by the requestor and installed in a resolv.conf file.
1898 - The IKEv2 daemon charon installs a route for each IPsec policy to use
1899 the correct source address even if an application does not explicitly
1902 - Integrated the EAP framework into charon which loads pluggable EAP library
1903 modules. The ipsec.conf parameter authby=eap initiates EAP authentication
1904 on the client side, while the "eap" parameter on the server side defines
1905 the EAP method to use for client authentication.
1906 A generic client side EAP-Identity module and an EAP-SIM authentication
1907 module using a third party card reader implementation are included.
1909 - Added client side support for cookies.
1911 - Integrated the fixes done at the IKEv2 interoperability bakeoff, including
1912 strict payload order, correct INVALID_KE_PAYLOAD rejection and other minor
1913 fixes to enhance interoperability with other implementations.
1919 - strongSwan now interoperates with the NCP Secure Entry Client,
1920 the Shrew Soft VPN Client, and the Cisco VPN client, doing both
1921 XAUTH and Mode Config.
1923 - UNITY attributes are now recognized and UNITY_BANNER is set
1924 to a default string.
1930 - IKEv1: Support for extended authentication (XAUTH) in combination
1931 with ISAKMP Main Mode RSA or PSK authentication. Both client and
1932 server side were implemented. Handling of user credentials can
1933 be done by a run-time loadable XAUTH module. By default user
1934 credentials are stored in ipsec.secrets.
1936 - IKEv2: Support for reauthentication when rekeying
1938 - IKEv2: Support for transport mode
1940 - fixed a lot of bugs related to byte order
1942 - various other bugfixes
1948 - IKEv1: Implementation of ModeConfig push mode via the new connection
1949 keyword modeconfig=push allows interoperability with Cisco VPN gateways.
1951 - IKEv1: The command ipsec statusall now shows "DPD active" for all
1952 ISAKMP SAs that are under active Dead Peer Detection control.
1954 - IKEv2: Charon's logging and debugging framework has been completely rewritten.
1955 Instead of logger, special printf() functions are used to directly
1956 print objects like hosts (%H) identifications (%D), certificates (%Q),
1957 etc. The number of debugging levels have been reduced to:
1959 0 (audit), 1 (control), 2 (controlmore), 3 (raw), 4 (private)
1961 The debugging levels can either be specified statically in ipsec.conf as
1964 charondebug="lib 1, cfg 3, net 2"
1966 or changed at runtime via stroke as
1968 ipsec stroke loglevel cfg 2
1974 - Implemented full support for IPv6-in-IPv6 tunnels.
1976 - Added configuration options for dead peer detection in IKEv2. dpd_action
1977 types "clear", "hold" and "restart" are supported. The dpd_timeout
1978 value is not used, as the normal retransmission policy applies to
1979 detect dead peers. The dpd_delay parameter enables sending of empty
1980 informational message to detect dead peers in case of inactivity.
1982 - Added support for preshared keys in IKEv2. PSK keys configured in
1983 ipsec.secrets are loaded. The authby parameter specifies the authentication
1984 method to authentificate ourself, the other peer may use PSK or RSA.
1986 - Changed retransmission policy to respect the keyingtries parameter.
1988 - Added private key decryption. PEM keys encrypted with AES-128/192/256
1989 or 3DES are supported.
1991 - Implemented DES/3DES algorithms in libstrongswan. 3DES can be used to
1992 encrypt IKE traffic.
1994 - Implemented SHA-256/384/512 in libstrongswan, allows usage of certificates
1995 signed with such a hash algorithm.
1997 - Added initial support for updown scripts. The actions up-host/client and
1998 down-host/client are executed. The leftfirewall=yes parameter
1999 uses the default updown script to insert dynamic firewall rules, a custom
2000 updown script may be specified with the leftupdown parameter.
2006 - Added support for the auto=route ipsec.conf parameter and the
2007 ipsec route/unroute commands for IKEv2. This allows to set up IKE_SAs and
2008 CHILD_SAs dynamically on demand when traffic is detected by the
2011 - Added support for rekeying IKE_SAs in IKEv2 using the ikelifetime parameter.
2012 As specified in IKEv2, no reauthentication is done (unlike in IKEv1), only
2013 new keys are generated using perfect forward secrecy. An optional flag
2014 which enforces reauthentication will be implemented later.
2016 - "sha" and "sha1" are now treated as synonyms in the ike= and esp=
2017 algorithm configuration statements.
2023 - Full X.509 certificate trust chain verification has been implemented.
2024 End entity certificates can be exchanged via CERT payloads. The current
2025 default is leftsendcert=always, since CERTREQ payloads are not supported
2026 yet. Optional CRLs must be imported locally into /etc/ipsec.d/crls.
2028 - Added support for leftprotoport/rightprotoport parameters in IKEv2. IKEv2
2029 would offer more possibilities for traffic selection, but the Linux kernel
2030 currently does not support it. That's why we stick with these simple
2031 ipsec.conf rules for now.
2033 - Added Dead Peer Detection (DPD) which checks liveliness of remote peer if no
2034 IKE or ESP traffic is received. DPD is currently hardcoded (dpdaction=clear,
2037 - Initial NAT traversal support in IKEv2. Charon includes NAT detection
2038 notify payloads to detect NAT routers between the peers. It switches
2039 to port 4500, uses UDP encapsulated ESP packets, handles peer address
2040 changes gracefully and sends keep alive message periodically.
2042 - Reimplemented IKE_SA state machine for charon, which allows simultaneous
2043 rekeying, more shared code, cleaner design, proper retransmission
2044 and a more extensible code base.
2046 - The mixed PSK/RSA roadwarrior detection capability introduced by the
2047 strongswan-2.7.0 release necessitated the pre-parsing of the IKE proposal
2048 payloads by the responder right before any defined IKE Main Mode state had
2049 been established. Although any form of bad proposal syntax was being correctly
2050 detected by the payload parser, the subsequent error handler didn't check
2051 the state pointer before logging current state information, causing an
2052 immediate crash of the pluto keying daemon due to a NULL pointer.
2058 - Added algorithm selection to charon: New default algorithms for
2059 ike=aes128-sha-modp2048, as both daemons support it. The default
2060 for IPsec SAs is now esp=aes128-sha,3des-md5. charon handles
2061 the ike/esp parameter the same way as pluto. As this syntax does
2062 not allow specification of a pseudo random function, the same
2063 algorithm as for integrity is used (currently sha/md5). Supported
2065 Encryption: aes128, aes192, aes256
2066 Integrity/PRF: md5, sha (using hmac)
2067 DH-Groups: modp768, 1024, 1536, 2048, 4096, 8192
2069 Encryption: aes128, aes192, aes256, 3des, blowfish128,
2070 blowfish192, blowfish256
2071 Integrity: md5, sha1
2072 More IKE encryption algorithms will come after porting libcrypto into
2075 - initial support for rekeying CHILD_SAs using IKEv2. Currently no
2076 perfect forward secrecy is used. The rekeying parameters rekey,
2077 rekeymargin, rekeyfuzz and keylife from ipsec.conf are now supported
2078 when using IKEv2. WARNING: charon currently is unable to handle
2079 simultaneous rekeying. To avoid such a situation, use a large
2080 rekeyfuzz, or even better, set rekey=no on one peer.
2082 - support for host2host, net2net, host2net (roadwarrior) tunnels
2083 using predefined RSA certificates (see uml scenarios for
2084 configuration examples).
2086 - new build environment featuring autotools. Features such
2087 as HTTP, LDAP and smartcard support may be enabled using
2088 the ./configure script. Changing install directories
2089 is possible, too. See ./configure --help for more details.
2091 - better integration of charon with ipsec starter, which allows
2092 (almost) transparent operation with both daemons. charon
2093 handles ipsec commands up, down, status, statusall, listall,
2094 listcerts and allows proper load, reload and delete of connections
2101 - initial support of the IKEv2 protocol. Connections in
2102 ipsec.conf designated by keyexchange=ikev2 are negotiated
2103 by the new IKEv2 charon keying daemon whereas those marked
2104 by keyexchange=ikev1 or the default keyexchange=ike are
2105 handled thy the IKEv1 pluto keying daemon. Currently only
2106 a limited subset of functions are available with IKEv2
2107 (Default AES encryption, authentication based on locally
2108 imported X.509 certificates, unencrypted private RSA keys
2109 in PKCS#1 file format, limited functionality of the ipsec
2116 - the dynamic iptables rules from the _updown_x509 template
2117 for KLIPS and the _updown_policy template for NETKEY have
2118 been merged into the default _updown script. The existing
2119 left|rightfirewall keyword causes the automatic insertion
2120 and deletion of ACCEPT rules for tunneled traffic upon
2121 the successful setup and teardown of an IPsec SA, respectively.
2122 left|rightfirwall can be used with KLIPS under any Linux 2.4
2123 kernel or with NETKEY under a Linux kernel version >= 2.6.16
2124 in conjunction with iptables >= 1.3.5. For NETKEY under a Linux
2125 kernel version < 2.6.16 which does not support IPsec policy
2126 matching yet, please continue to use a copy of the _updown_espmark
2127 template loaded via the left|rightupdown keyword.
2129 - a new left|righthostaccess keyword has been introduced which
2130 can be used in conjunction with left|rightfirewall and the
2131 default _updown script. By default leftfirewall=yes inserts
2132 a bi-directional iptables FORWARD rule for a local client network
2133 with a netmask different from 255.255.255.255 (single host).
2134 This does not allow to access the VPN gateway host via its
2135 internal network interface which is part of the client subnet
2136 because an iptables INPUT and OUTPUT rule would be required.
2137 lefthostaccess=yes will cause this additional ACCEPT rules to
2140 - mixed PSK|RSA roadwarriors are now supported. The ISAKMP proposal
2141 payload is preparsed in order to find out whether the roadwarrior
2142 requests PSK or RSA so that a matching connection candidate can
2149 - the new _updown_policy template allows ipsec policy based
2150 iptables firewall rules. Required are iptables version
2151 >= 1.3.5 and linux kernel >= 2.6.16. This script obsoletes
2152 the _updown_espmark template, so that no INPUT mangle rules
2153 are required any more.
2155 - added support of DPD restart mode
2157 - ipsec starter now allows the use of wildcards in include
2158 statements as e.g. in "include /etc/my_ipsec/*.conf".
2159 Patch courtesy of Matthias Haas.
2161 - the Netscape OID 'employeeNumber' is now recognized and can be
2162 used as a Relative Distinguished Name in certificates.
2168 - /etc/init.d/ipsec or /etc/rc.d/ipsec is now a copy of the ipsec
2169 command and not of ipsec setup any more.
2171 - ipsec starter now supports AH authentication in conjunction with
2172 ESP encryption. AH authentication is configured in ipsec.conf
2173 via the auth=ah parameter.
2175 - The command ipsec scencrypt|scdecrypt <args> is now an alias for
2176 ipsec whack --scencrypt|scdecrypt <args>.
2178 - get_sa_info() now determines for the native netkey IPsec stack
2179 the exact time of the last use of an active eroute. This information
2180 is used by the Dead Peer Detection algorithm and is also displayed by
2181 the ipsec status command.
2187 - running under the native Linux 2.6 IPsec stack, the function
2188 get_sa_info() is called by ipsec auto --status to display the current
2189 number of transmitted bytes per IPsec SA.
2191 - get_sa_info() is also used by the Dead Peer Detection process to detect
2192 recent ESP activity. If ESP traffic was received from the peer within
2193 the last dpd_delay interval then no R_Y_THERE notification must be sent.
2195 - strongSwan now supports the Relative Distinguished Name "unstructuredName"
2196 in ID_DER_ASN1_DN identities. The following notations are possible:
2198 rightid="unstructuredName=John Doe"
2199 rightid="UN=John Doe"
2201 - fixed a long-standing bug which caused PSK-based roadwarrior connections
2202 to segfault in the function id.c:same_id() called by keys.c:get_secret()
2203 if an FQDN, USER_FQDN, or Key ID was defined, as in the following example.
2210 - the ipsec command now supports most ipsec auto commands (e.g. ipsec listall).
2212 - ipsec starter didn't set host_addr and client.addr ports in whack msg.
2214 - in order to guarantee backwards-compatibility with the script-based
2215 auto function (e.g. auto --replace), the ipsec starter scripts stores
2216 the defaultroute information in the temporary file /var/run/ipsec.info.
2218 - The compile-time option USE_XAUTH_VID enables the sending of the XAUTH
2219 Vendor ID which is expected by Cisco PIX 7 boxes that act as IKE Mode Config
2222 - the ipsec starter now also recognizes the parameters authby=never and
2223 type=passthrough|pass|drop|reject.
2229 - ipsec starter now supports the also parameter which allows
2230 a modular structure of the connection definitions. Thus
2231 "ipsec start" is now ready to replace "ipsec setup".
2237 - Mathieu Lafon's popular ipsec starter tool has been added to the
2238 strongSwan distribution. Many thanks go to Stephan Scholz from astaro
2239 for his integration work. ipsec starter is a C program which is going
2240 to replace the various shell and awk starter scripts (setup, _plutoload,
2241 _plutostart, _realsetup, _startklips, _confread, and auto). Since
2242 ipsec.conf is now parsed only once, the starting of multiple tunnels is
2243 accelerated tremedously.
2245 - Added support of %defaultroute to the ipsec starter. If the IP address
2246 changes, a HUP signal to the ipsec starter will automatically
2247 reload pluto's connections.
2249 - moved most compile time configurations from pluto/Makefile to
2250 Makefile.inc by defining the options USE_LIBCURL, USE_LDAP,
2251 USE_SMARTCARD, and USE_NAT_TRAVERSAL_TRANSPORT_MODE.
2253 - removed the ipsec verify and ipsec newhostkey commands
2255 - fixed some 64-bit issues in formatted print statements
2257 - The scepclient functionality implementing the Simple Certificate
2258 Enrollment Protocol (SCEP) is nearly complete but hasn't been
2265 - CA certicates are now automatically loaded from a smartcard
2266 or USB crypto token and appear in the ipsec auto --listcacerts
2273 - when using "ipsec whack --scencrypt <data>" with a PKCS#11
2274 library that does not support the C_Encrypt() Cryptoki
2275 function (e.g. OpenSC), the RSA encryption is done in
2276 software using the public key fetched from the smartcard.
2278 - The scepclient function now allows to define the
2279 validity of a self-signed certificate using the --days,
2280 --startdate, and --enddate options. The default validity
2281 has been changed from one year to five years.
2287 - the config setup parameter pkcs11proxy=yes opens pluto's PKCS#11
2288 interface to other applications for RSA encryption and decryption
2289 via the whack interface. Notation:
2291 ipsec whack --scencrypt <data>
2292 [--inbase 16|hex|64|base64|256|text|ascii]
2293 [--outbase 16|hex|64|base64|256|text|ascii]
2296 ipsec whack --scdecrypt <data>
2297 [--inbase 16|hex|64|base64|256|text|ascii]
2298 [--outbase 16|hex|64|base64|256|text|ascii]
2301 The default setting for inbase and outbase is hex.
2303 The new proxy interface can be used for securing symmetric
2304 encryption keys required by the cryptoloop or dm-crypt
2305 disk encryption schemes, especially in the case when
2306 pkcs11keepstate=yes causes pluto to lock the pkcs11 slot
2309 - if the file /etc/ipsec.secrets is lacking during the startup of
2310 pluto then the root-readable file /etc/ipsec.d/private/myKey.der
2311 containing a 2048 bit RSA private key and a matching self-signed
2312 certificate stored in the file /etc/ipsec.d/certs/selfCert.der
2313 is automatically generated by calling the function
2315 ipsec scepclient --out pkcs1 --out cert-self
2317 scepclient was written by Jan Hutter and Martin Willi, students
2318 at the University of Applied Sciences in Rapperswil, Switzerland.
2324 - the current extension of the PKCS#7 framework introduced
2325 a parsing error in PKCS#7 wrapped X.509 certificates that are
2326 e.g. transmitted by Windows XP when multi-level CAs are used.
2327 the parsing syntax has been fixed.
2329 - added a patch by Gerald Richter which tolerates multiple occurrences
2330 of the ipsec0 interface when using KLIPS.
2336 - with gawk-3.1.4 the word "default2 has become a protected
2337 keyword for use in switch statements and cannot be used any
2338 more in the strongSwan scripts. This problem has been
2339 solved by renaming "default" to "defaults" and "setdefault"
2340 in the scripts _confread and auto, respectively.
2342 - introduced the parameter leftsendcert with the values
2344 always|yes (the default, always send a cert)
2345 ifasked (send the cert only upon a cert request)
2346 never|no (never send a cert, used for raw RSA keys and
2349 - fixed the initialization of the ESP key length to a default of
2350 128 bits in the case that the peer does not send a key length
2351 attribute for AES encryption.
2353 - applied Herbert Xu's uniqueIDs patch
2355 - applied Herbert Xu's CLOEXEC patches
2361 - CRLs can now be cached also in the case when the issuer's
2362 certificate does not contain a subjectKeyIdentifier field.
2363 In that case the subjectKeyIdentifier is computed by pluto as the
2364 160 bit SHA-1 hash of the issuer's public key in compliance
2365 with section 4.2.1.2 of RFC 3280.
2367 - Fixed a bug introduced by strongswan-2.5.1 which eliminated
2368 not only multiple Quick Modes of a given connection but also
2369 multiple connections between two security gateways.
2375 - Under the native IPsec of the Linux 2.6 kernel, a %trap eroute
2376 installed either by setting auto=route in ipsec.conf or by
2377 a connection put into hold, generates an XFRM_AQUIRE event
2378 for each packet that wants to use the not-yet exisiting
2379 tunnel. Up to now each XFRM_AQUIRE event led to an entry in
2380 the Quick Mode queue, causing multiple IPsec SA to be
2381 established in rapid succession. Starting with strongswan-2.5.1
2382 only a single IPsec SA is established per host-pair connection.
2384 - Right after loading the PKCS#11 module, all smartcard slots are
2385 searched for certificates. The result can be viewed using
2388 ipsec auto --listcards
2390 The certificate objects found in the slots are numbered
2391 starting with #1, #2, etc. This position number can be used to address
2392 certificates (leftcert=%smartcard) and keys (: PIN %smartcard)
2393 in ipsec.conf and ipsec.secrets, respectively:
2395 %smartcard (selects object #1)
2396 %smartcard#1 (selects object #1)
2397 %smartcard#3 (selects object #3)
2399 As an alternative the existing retrieval scheme can be used:
2401 %smartcard:45 (selects object with id=45)
2402 %smartcard0 (selects first object in slot 0)
2403 %smartcard4:45 (selects object in slot 4 with id=45)
2405 - Depending on the settings of CKA_SIGN and CKA_DECRYPT
2406 private key flags either C_Sign() or C_Decrypt() is used
2407 to generate a signature.
2409 - The output buffer length parameter siglen in C_Sign()
2410 is now initialized to the actual size of the output
2411 buffer prior to the function call. This fixes the
2412 CKR_BUFFER_TOO_SMALL error that could occur when using
2413 the OpenSC PKCS#11 module.
2415 - Changed the initialization of the PKCS#11 CK_MECHANISM in
2416 C_SignInit() to mech = { CKM_RSA_PKCS, NULL_PTR, 0 }.
2418 - Refactored the RSA public/private key code and transferred it
2419 from keys.c to the new pkcs1.c file as a preparatory step
2420 towards the release of the SCEP client.
2426 - The loading of a PKCS#11 smartcard library module during
2427 runtime does not require OpenSC library functions any more
2428 because the corresponding code has been integrated into
2429 smartcard.c. Also the RSAREF pkcs11 header files have been
2430 included in a newly created pluto/rsaref directory so that
2431 no external include path has to be defined any longer.
2433 - A long-awaited feature has been implemented at last:
2434 The local caching of CRLs fetched via HTTP or LDAP, activated
2435 by the parameter cachecrls=yes in the config setup section
2436 of ipsec.conf. The dynamically fetched CRLs are stored under
2437 a unique file name containing the issuer's subjectKeyID
2438 in /etc/ipsec.d/crls.
2440 - Applied a one-line patch courtesy of Michael Richardson
2441 from the Openswan project which fixes the kernel-oops
2442 in KLIPS when an snmp daemon is running on the same box.
2448 - Eliminated null length CRL distribution point strings.
2450 - Fixed a trust path evaluation bug introduced with 2.4.3
2456 - Improved the joint OCSP / CRL revocation policy.
2457 OCSP responses have precedence over CRL entries.
2459 - Introduced support of CRLv2 reason codes.
2461 - Fixed a bug with key-pad equipped readers which caused
2462 pluto to prompt for the pin via the console when the first
2463 occasion to enter the pin via the key-pad was missed.
2465 - When pluto is built with LDAP_V3 enabled, the library
2466 liblber required by newer versions of openldap is now
2473 - Added the _updown_espmark template which requires all
2474 incoming ESP traffic to be marked with a default mark
2477 - Introduced the pkcs11keepstate parameter in the config setup
2478 section of ipsec.conf. With pkcs11keepstate=yes the PKCS#11
2479 session and login states are kept as long as possible during
2480 the lifetime of pluto. This means that a PIN entry via a key
2481 pad has to be done only once.
2483 - Introduced the pkcs11module parameter in the config setup
2484 section of ipsec.conf which specifies the PKCS#11 module
2485 to be used with smart cards. Example:
2487 pkcs11module=/usr/lib/pkcs11/opensc-pkcs11.lo
2489 - Added support of smartcard readers equipped with a PIN pad.
2491 - Added patch by Jay Pfeifer which detects when netkey
2492 modules have been statically built into the Linux 2.6 kernel.
2494 - Added two patches by Herbert Xu. The first uses ip xfrm
2495 instead of setkey to flush the IPsec policy database. The
2496 second sets the optional flag in inbound IPComp SAs only.
2498 - Applied Ulrich Weber's patch which fixes an interoperability
2499 problem between native IPsec and KLIPS systems caused by
2500 setting the replay window to 32 instead of 0 for ipcomp.
2506 - Fixed a bug which caused an unwanted Mode Config request
2507 to be initiated in the case where "right" was used to denote
2508 the local side in ipsec.conf and "left" the remote side,
2509 contrary to the recommendation that "right" be remote and
2516 - updated Vendor ID to strongSwan-2.4.0
2518 - updated copyright statement to include David Buechi and
2525 - strongSwan now communicates with attached smartcards and
2526 USB crypto tokens via the standardized PKCS #11 interface.
2527 By default the OpenSC library from www.opensc.org is used
2528 but any other PKCS#11 library could be dynamically linked.
2529 strongSwan's PKCS#11 API was implemented by David Buechi
2530 and Michael Meier, both graduates of the Zurich University
2531 of Applied Sciences in Winterthur, Switzerland.
2533 - When a %trap eroute is triggered by an outgoing IP packet
2534 then the native IPsec stack of the Linux 2.6 kernel [often/
2535 always?] returns an XFRM_ACQUIRE message with an undefined
2536 protocol family field and the connection setup fails.
2537 As a workaround IPv4 (AF_INET) is now assumed.
2539 - the results of the UML test scenarios are now enhanced
2540 with block diagrams of the virtual network topology used
2541 in a particular test.
2547 - fixed IV used to decrypt informational messages.
2548 This bug was introduced with Mode Config functionality.
2550 - fixed NCP Vendor ID.
2552 - undid one of Ulrich Weber's maximum udp size patches
2553 because it caused a segmentation fault with NAT-ed
2556 - added UML scenarios wildcards and attr-cert which
2557 demonstrate the implementation of IPsec policies based
2558 on wildcard parameters contained in Distinguished Names and
2559 on X.509 attribute certificates, respectively.
2565 - Added basic Mode Config functionality
2567 - Added Mathieu Lafon's patch which upgrades the status of
2568 the NAT-Traversal implementation to RFC 3947.
2570 - The _startklips script now also loads the xfrm4_tunnel
2573 - Added Ulrich Weber's netlink replay window size and
2574 maximum udp size patches.
2576 - UML testing now uses the Linux 2.6.10 UML kernel by default.
2582 - Eric Marchionni and Patrik Rayo, both recent graduates from
2583 the Zuercher Hochschule Winterthur in Switzerland, created a
2584 User-Mode-Linux test setup for strongSwan. For more details
2585 please read the INSTALL and README documents in the testing
2588 - Full support of group attributes based on X.509 attribute
2589 certificates. Attribute certificates can be generated
2590 using the openac facility. For more details see
2594 The group attributes can be used in connection definitions
2595 in order to give IPsec access to specific user groups.
2596 This is done with the new parameter left|rightgroups as in
2598 rightgroups="Research, Sales"
2600 giving access to users possessing the group attributes
2601 Research or Sales, only.
2603 - In Quick Mode clients with subnet mask /32 are now
2604 coded as IP_V4_ADDRESS or IP_V6_ADDRESS. This should
2605 fix rekeying problems with the SafeNet/SoftRemote and NCP
2606 Secure Entry Clients.
2608 - Changed the defaults of the ikelifetime and keylife parameters
2609 to 3h and 1h, respectively. The maximum allowable values are
2610 now both set to 24 h.
2612 - Suppressed notification wars between two IPsec peers that
2613 could e.g. be triggered by incorrect ISAKMP encryption.
2615 - Public RSA keys can now have identical IDs if either the
2616 issuing CA or the serial number is different. The serial
2617 number of a certificate is now shown by the command
2619 ipsec auto --listpubkeys
2625 - Added Tuomo Soini's sourceip feature which allows a strongSwan
2626 roadwarrior to use a fixed Virtual IP (see README section 2.6)
2627 and reduces the well-known four tunnel case on VPN gateways to
2628 a single tunnel definition (see README section 2.4).
2630 - Fixed a bug occurring with NAT-Traversal enabled when the responder
2631 suddenly turns initiator and the initiator cannot find a matching
2632 connection because of the floated IKE port 4500.
2634 - Removed misleading ipsec verify command from barf.
2636 - Running under the native IP stack, ipsec --version now shows
2637 the Linux kernel version (courtesy to the Openswan project).
2643 - Introduced the ipsec auto --listalgs monitoring command which lists
2644 all currently registered IKE and ESP algorithms.
2646 - Fixed a bug in the ESP algorithm selection occurring when the strict flag
2647 is set and the first proposed transform does not match.
2649 - Fixed another deadlock in the use of the lock_certs_and_keys() mutex,
2650 occurring when a smartcard is present.
2652 - Prevented that a superseded Phase1 state can trigger a DPD_TIMEOUT event.
2654 - Fixed the printing of the notification names (null)
2656 - Applied another of Herbert Xu's Netlink patches.
2662 - Support of Dead Peer Detection. The connection parameter
2664 dpdaction=clear|hold
2666 activates DPD for the given connection.
2668 - The default Opportunistic Encryption (OE) policy groups are not
2669 automatically included anymore. Those wishing to activate OE can include
2670 the policy group with the following statement in ipsec.conf:
2672 include /etc/ipsec.d/examples/oe.conf
2674 The default for [right|left]rsasigkey is now set to %cert.
2676 - strongSwan now has a Vendor ID of its own which can be activated
2677 using the compile option VENDORID
2679 - Applied Herbert Xu's patch which sets the compression algorithm correctly.
2681 - Applied Herbert Xu's patch fixing an ESPINUDP problem
2683 - Applied Herbert Xu's patch setting source/destination port numbers.
2685 - Reapplied one of Herbert Xu's NAT-Traversal patches which got
2686 lost during the migration from SuperFreeS/WAN.
2688 - Fixed a deadlock in the use of the lock_certs_and_keys() mutex.
2690 - Fixed the unsharing of alg parameters when instantiating group
2697 - Thomas Walpuski made me aware of a potential DoS attack via
2698 a PKCS#7-wrapped certificate bundle which could overwrite valid CA
2699 certificates in Pluto's authority certificate store. This vulnerability
2700 was fixed by establishing trust in CA candidate certificates up to a
2701 trusted root CA prior to insertion into Pluto's chained list.
2703 - replaced the --assign option by the -v option in the auto awk script
2704 in order to make it run with mawk under debian/woody.
2710 - Split of the status information between ipsec auto --status (concise)
2711 and ipsec auto --statusall (verbose). Both commands can be used with
2712 an optional connection selector:
2714 ipsec auto --status[all] <connection_name>
2716 - Added the description of X.509 related features to the ipsec_auto(8)
2719 - Hardened the ASN.1 parser in debug mode, especially the printing
2720 of malformed distinguished names.
2722 - The size of an RSA public key received in a certificate is now restricted to
2724 512 bits <= modulus length <= 8192 bits.
2726 - Fixed the debug mode enumeration.
2732 - Fixed another PKCS#7 vulnerability which could lead to an
2733 endless loop while following the X.509 trust chain.
2739 - Fixed the PKCS#7 vulnerability discovered by Thomas Walpuski
2740 that accepted end certificates having identical issuer and subject
2741 distinguished names in a multi-tier X.509 trust chain.
2747 - Removed all remaining references to ipsec_netlink.h in KLIPS.
2753 - The new "ca" section allows to define the following parameters:
2756 cacert=koolCA.pem # cacert of kool CA
2757 ocspuri=http://ocsp.kool.net:8001 # ocsp server
2758 ldapserver=ldap.kool.net # default ldap server
2759 crluri=http://www.kool.net/kool.crl # crl distribution point
2760 crluri2="ldap:///O=Kool, C= .." # crl distribution point #2
2761 auto=add # add, ignore
2763 The ca definitions can be monitored via the command
2765 ipsec auto --listcainfos
2767 - Fixed cosmetic corruption of /proc filesystem by integrating
2768 D. Hugh Redelmeier's freeswan-2.06 kernel fixes.
2774 - Added support for the 818043 NAT-Traversal update of Microsoft's
2775 Windows 2000/XP IPsec client which sends an ID_FQDN during Quick Mode.
2777 - A symbolic link to libcrypto is now added in the kernel sources
2778 during kernel compilation
2780 - Fixed a couple of 64 bit issues (mostly casts to int).
2781 Thanks to Ken Bantoft who checked my sources on a 64 bit platform.
2783 - Replaced s[n]printf() statements in the kernel by ipsec_snprintf().
2784 Credits go to D. Hugh Redelmeier, Michael Richardson, and Sam Sgro
2785 of the FreeS/WAN team who solved this problem with the 2.4.25 kernel.
2791 - an empty ASN.1 SEQUENCE OF or SET OF object (e.g. a subjectAltName
2792 certificate extension which contains no generalName item) can cause
2793 a pluto crash. This bug has been fixed. Additionally the ASN.1 parser has
2794 been hardened to make it more robust against malformed ASN.1 objects.
2796 - applied Herbert Xu's NAT-T patches which fixes NAT-T under the native
2797 Linux 2.6 IPsec stack.
2803 - based on freeswan-2.04, x509-1.5.3, nat-0.6c, alg-0.8.1rc12